move clock frequencies into clock driver
authorFlorian Fainelli <florian@openwrt.org>
Thu, 6 Dec 2012 22:40:26 +0000 (22:40 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Thu, 6 Dec 2012 22:40:26 +0000 (22:40 +0000)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34556

target/linux/adm8668/files/arch/mips/adm8668/clock.c
target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h

index 6c839a24744d4e24fbbd56bf9a1fa9a120c2d2fc..1e010fcc8f05d094c6ebeed1b883b174c7cf3c1c 100644 (file)
@@ -19,7 +19,7 @@ struct clk {
 };
 
 static struct clk uart_clk = {
-       .rate   = ADM8668_UARTCLK_FREQ,
+       .rate   = 62500000,
 };
 
 static struct clk sys_clk;
@@ -70,7 +70,7 @@ void __init adm8668_init_clocks(void)
         * CR3 bit 14~11, 0000 -> 175MHz, 0001 -> 180MHz, etc...
         */
        adj = (ADM8668_CONFIG_REG(ADM8668_CR3) >> 11) & 0xf;
-       sys_clk.rate = SYS_CLOCK + adj * 5000000;
+       sys_clk.rate = 175000000 + (adj * 5000000);
 
        pr_info("ADM8668 CPU clock: %lu MHz\n", sys_clk.rate / 1000000);
 }
index f0608d155c8056a1ddc9df44e6ecda20861e7cff..f7b2c5e63227835a42b6bf44ac3ddaacd46c1fdb 100644 (file)
@@ -9,8 +9,6 @@
 #ifndef  __ADM8668_H__
 #define  __ADM8668_H__
 
-#define SYS_CLOCK              175000000
-
 /*=======================  Physical Memory Map  ============================*/
 #define ADM8668_SDRAM_BASE     0
 #define ADM8668_SMEM1_BASE     0x10000000
@@ -29,9 +27,6 @@
 #define ADM8668_PCICFG_BASE    0x12200000
 #define ADM8668_PCIDAT_BASE    0x12400000
 
-/** onboard uart **/
-#define ADM8668_UARTCLK_FREQ   62500000
-
 /* interrupt levels */
 #define INT_LVL_SWI            1
 #define INT_LVL_COMMS_RX       2