diff options
| author | Yang Xiwen | 2025-04-10 11:09:42 +0000 |
|---|---|---|
| committer | Robert Marko | 2025-04-11 08:04:35 +0000 |
| commit | c166cb96615d8a74e91d0de40da01ffa10a89c27 (patch) | |
| tree | 5668ff5616068bc641c76d603bd8fd3b89608832 | |
| parent | b8eba7514643cc6b64d93e3fa7048d6721efbc17 (diff) | |
| download | openwrt-c166cb96615d8a74e91d0de40da01ffa10a89c27.tar.gz | |
qualcommax: eap623od-hd-v1: fix phy node and LED config
The reason phy fails to probe without explicitly overrided phy id is
that the reset timing fails to match. Fix it with proper `reset-delay-us` and
`reset-post-delay-us`.
While at it, change LED settings to match EAP610-Outdoor.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18450
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts index a4e49c9d6f..f54593a08b 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts @@ -16,10 +16,10 @@ aliases { serial0 = &blsp1_uart3; - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; + led-boot = &led_sys_green; + led-failsafe = &led_sys_yellow; + led-running = &led_sys_green; + led-upgrade = &led_sys_yellow; }; chosen { @@ -40,15 +40,15 @@ leds { compatible = "gpio-leds"; - led_system: system { + led_sys_green: led-0 { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_STATUS; gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; - wlan { + led_sys_yellow: led-1 { color = <LED_COLOR_ID_YELLOW>; - function = LED_FUNCTION_WLAN; + function = LED_FUNCTION_STATUS; gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; }; }; @@ -86,15 +86,14 @@ &mdio { status = "okay"; - pinctrl-0 = <&mdio_pins>; + reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + reset-delay-us = <10000>; + reset-post-delay-us = <50000>; + pinctrl-0 = <&mdio_pins>, <&phy_pins>; pinctrl-names = "default"; rtl8211f: ethernet-phy@4 { - compatible = "ethernet-phy-id001c.c916"; reg = <4>; - reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&phy_pins>; - pinctrl-names = "default"; realtek,clkout-disable; realtek,aldps-enable; |