diff options
| author | Aleksander Jan Bajkowski | 2025-02-17 18:25:02 +0000 |
|---|---|---|
| committer | Daniel Golle | 2025-03-01 03:03:02 +0000 |
| commit | d50d51d74e93a057c607c9a4081ff3f29cbab38f (patch) | |
| tree | 36212da916167a70dff5bb46687149e5f8b1a1e5 | |
| parent | ce68f61cb67a4701a108f838f510e72ca63ed78e (diff) | |
| download | openwrt-d50d51d74e93a057c607c9a4081ff3f29cbab38f.tar.gz | |
mediatek: filogic: migrate Zyxel NWA50AX Pro to upstream PHY LED control
This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
| -rw-r--r-- | target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts | 18 | ||||
| -rw-r--r-- | target/linux/mediatek/filogic/base-files/etc/board.d/01_leds | 4 |
2 files changed, 20 insertions, 2 deletions
diff --git a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts index 95247eba9d..ef72ca4ba3 100644 --- a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts +++ b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts @@ -85,8 +85,22 @@ reg = <5>; compatible = "ethernet-phy-ieee802.3-c45"; - /* LED0: Amber ; LED1: nc ; LED2: nc ; LED3: Green */ - mxl,led-config = <0x3b0 0x0 0x0 0x3c0>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led-0 { + reg = <0>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_WAN; + }; + + led-3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + }; + }; }; }; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 4e1d10a4dc..3287cfe29b 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -150,6 +150,10 @@ zyxel,ex5601-t0-ubootmod) ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx" ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx" ;; +zyxel,nwa50ax-pro) + ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:amber:wan" "eth0" "link_10 link_100 link_2500 tx rx" + ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:green:wan" "eth0" "link_1000 link_2500 tx rx" + ;; esac board_config_flush |