diff options
| author | David Bauer | 2024-09-14 17:10:10 +0000 |
|---|---|---|
| committer | David Bauer | 2024-09-20 17:52:46 +0000 |
| commit | dd4b05ee8a6a80ddf4e0ed188234fa04d841867c (patch) | |
| tree | c8446e39ddf283509b65429353b2dd9fd3048b90 | |
| parent | 4d7ad378914382759e66dc32f1ffcab58639309a (diff) | |
| download | openwrt-dd4b05ee8a6a80ddf4e0ed188234fa04d841867c.tar.gz | |
ipq40xx: add PoE passthrough GPIO
Add the GPIO pin of the PoE passthrough switch on the Aruba AP-303H.
Power is activated when the pin is low. It enables a PSE chip, so power
is only supplied to downstream devices when they are 802.3af/at
compliant devices.
Ensure you use a sufficient power supply when chaining a consuming
device after the AP.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit b40cc46cc882ff97f2752e7837173ffc9f884eb9)
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches index 2035d84993..f57d4c5888 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches @@ -6,6 +6,9 @@ board_config_update board=$(board_name) case "$board" in +aruba,ap-303h) + ucidef_add_gpio_switch "poe_passtrough" "POE passtrough disable" "546" "1" + ;; cellc,rtl30vw) ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1" ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1" |