drivers/mmc: send CMD8 only for SD card in initialization

Sending CMD8 before CMD1 just causes to fetch data failure in eMMC.
Check whether it's eMMC first. If it's eMMC, send CMD1 command instead.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 0c9ec1017e30bbe7531a4c26b9c750ca81e4c0f4..c8eac26bebcbec0c1f1ec67683be28de52245103 100644 (file)
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -363,8 +363,6 @@ static int mmc_reset_to_idle(void)
 {
        int ret;
 
-       mdelay(1);
-
        /* CMD0: reset to IDLE */
        ret = mmc_send_cmd(MMC_CMD(0), 0, 0, NULL);
        if (ret != 0) {
@@ -413,14 +411,16 @@ static int mmc_enumerate(unsigned int clk, unsigned int bus_width)
 
        mmc_reset_to_idle();
 
-       /* CMD8: Send Interface Condition Command */
-       ret = mmc_send_cmd(MMC_CMD(8), VHS_2_7_3_6_V | CMD8_CHECK_PATTERN,
-                          MMC_RESPONSE_R(7), &resp_data[0]);
-
-       if ((ret == 0) && ((resp_data[0] & 0xffU) == CMD8_CHECK_PATTERN)) {
-               ret = sd_send_op_cond();
-       } else {
+       if (mmc_dev_info->mmc_dev_type == MMC_IS_EMMC) {
                ret = mmc_send_op_cond();
+       } else {
+               /* CMD8: Send Interface Condition Command */
+               ret = mmc_send_cmd(MMC_CMD(8), VHS_2_7_3_6_V | CMD8_CHECK_PATTERN,
+                                  MMC_RESPONSE_R(7), &resp_data[0]);
+
+               if ((ret == 0) && ((resp_data[0] & 0xffU) == CMD8_CHECK_PATTERN)) {
+                       ret = sd_send_op_cond();
+               }
        }
        if (ret != 0) {
                return ret;