CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_8139TOO is not set
CONFIG_AUDIT=y
CONFIG_AUDIT_GENERIC=y
+# CONFIG_B44 is not set
CONFIG_BASE_SMALL=0
-# CONFIG_BCM96338 is not set
-# CONFIG_BCM96345 is not set
-CONFIG_BCM96348=y
CONFIG_BCM963XX=y
-# CONFIG_BCM_ADSL is not set
-CONFIG_BCM_ADSL_IMPL=1
-# CONFIG_BCM_ATMAPI is not set
-CONFIG_BCM_ATMAPI_IMPL=1
-# CONFIG_BCM_ATMTEST is not set
-CONFIG_BCM_ATMTEST_IMPL=1
-CONFIG_BCM_BLAA_IMPL=1
-# CONFIG_BCM_BOARD is not set
-CONFIG_BCM_BOARD_IMPL=1
-# CONFIG_BCM_ENDPOINT is not set
-CONFIG_BCM_ENDPOINT_IMPL=1
-# CONFIG_BCM_ENET is not set
-CONFIG_BCM_ENET_IMPL=1
-# CONFIG_BCM_HPNA is not set
-CONFIG_BCM_HPNA_IMPL=0
-CONFIG_BCM_PCI=y
-CONFIG_BCM_PROCFS=y
-CONFIG_BCM_PROCFS_IMPL=1
-# CONFIG_BCM_SECURITY is not set
-CONFIG_BCM_SECURITY_IMPL=1
-CONFIG_BCM_SERIAL=y
-CONFIG_BCM_SERIAL_IMPL=1
-# CONFIG_BCM_USB is not set
-CONFIG_BCM_USB_IMPL=1
-# CONFIG_BCM_VDSL is not set
-CONFIG_BCM_VDSL_IMPL=1
-# CONFIG_BCM_WLAN is not set
-CONFIG_BCM_WLAN_IMPL=1
CONFIG_BINFMT_MISC=m
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BSD_DISKLABEL is not set
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBPA10X is not set
+CONFIG_CFE=y
CONFIG_CICADA_PHY=m
# CONFIG_CIFS is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_FIRMWARE_EDID=y
# CONFIG_FIXED_PHY is not set
CONFIG_FORCED_INLINING=y
+CONFIG_FS_POSIX_ACL=y
CONFIG_FW_LOADER=m
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_GEN_RTC is not set
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_TUNNEL=m
-CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200_DEBUG=y
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KGDB is not set
CONFIG_KMOD=y
+# CONFIG_LAN_SAA9730 is not set
CONFIG_LBD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LLC2 is not set
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_CSTM_MIPS_IXX is not set
CONFIG_MTD_DEBUG=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NAND is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_KEY=y
-# CONFIG_NET_PCI is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PHYLIB=m
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
+# CONFIG_VIA_RHINE is not set
CONFIG_VLAN_8021Q=m
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN_ROUTER=m
# CONFIG_WATCHDOG is not set
# CONFIG_XFS_FS is not set
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_TOSHIBA=y
+++ /dev/null
-# Kernel and Driver configuration for Broadcom Commengine ADSL board
-choice
- prompt "Broadcom Commengine ADSL board"
- depends on BCM963XX
- default BCM96348
- help
- Select different Broadcom ADSL board
-
-config BCM96338
- bool "96338 ADSL board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
-
-config BCM96345
- bool "96345 ADSL board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
-
-config BCM96348
- bool "96348 ADSL board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
-
-endchoice
-
-config BCM_BOARD
- bool "Support for Broadcom Board"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL
- bool "Support for Serial Port"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET
- tristate "Support for Ethernet"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB
- tristate "Support for USB"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN
- tristate "Support for Wireless"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PCI
- bool "Support for PCI"
- depends on BCM96338 || BCM96345 || BCM96348
- select PCI
-
-config BCM_ATMAPI
- tristate "Support for ATM"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST
- tristate "Support for ATM Diagnostic"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL
- tristate "Support for ADSL"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT
- tristate "Support for VOICE"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS
- tristate "Support for PROCFS"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL
- tristate "Support for VDSL"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY
- tristate "Support for SECURITY"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA
- tristate "Support for HPNA"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BOARD_IMPL
- int "Implementation index for ADSL Board"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL_IMPL
- int "Implementation index for Serial"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET_IMPL
- int "Implementation index for Ethernet"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB_IMPL
- int "Implementation index for USB"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN_IMPL
- int "Implementation index for WIRELESS"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMAPI_IMPL
- int "Implementation index for ATM"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST_IMPL
- int "Implementation index for ATM Diagnostic"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BLAA_IMPL
- int "Implementation index for BLAA"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL_IMPL
- int "Implementation index for ADSL"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT_IMPL
- int "Implementation index for VOICE"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS_IMPL
- int "Implementation index for PROCFS"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL_IMPL
- int "Implementation index for VDSL"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY_IMPL
- int "Implementation index for SECURITY"
- depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA_IMPL
- int "Implementation index for HPNA"
- depends on BCM96338 || BCM96345 || BCM96348
-
#
-# Makefile for generic Broadcom MIPS boards
+# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel
#
# Copyright (C) 2004 Broadcom Corporation
#
-obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
+obj-y := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o
SRCBASE := $(TOPDIR)
EXTRA_CFLAGS += -I$(SRCBASE)/include
-#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
-EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
-
-
-ifeq "$(ADSL)" "ANNEX_B"
-EXTRA_CFLAGS += -DADSL_ANNEXB
-endif
-ifeq "$(ADSL)" "SADSL"
-EXTRA_CFLAGS += -DADSL_SADSL
-endif
-ifeq "$(ADSL)" "ANNEX_C"
-EXTRA_CFLAGS += -DADSL_ANNEXC
-endif
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-/***************************************************************************
- * File Name : bcm63xx_led.c
- *
- * Description:
- *
- * This file contains bcm963xx board led control API functions.
- *
- * To use it, do the following
- *
- * 1). define in the board.c the following led mappping (this is for 6345GW board):
- * const LED_MAP_PAIR cLedMapping45GW[] =
- * { // led name Initial state physical pin (ledMask)
- * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
- * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
- * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
- * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
- * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
- * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
- *
- * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
- * pointer from the above struct
- *
- * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
- *
- * 3). Sample call for kernel mode:
- *
- * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
- *
- * 4). Sample call for user mode
- *
- * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
- *
- *
- * Created on : 10/28/2002 seanl
- *
- ***************************************************************************/
-
-/* Includes. */
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <asm/uaccess.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-
-#define k100ms (HZ / 10) // ~100 ms
-#define kFastBlinkCount 0 // ~100ms
-#define kSlowBlinkCount 5 // ~600ms
-
-#define MAX_VIRT_LEDS 12
-
-// uncomment // for debug led
-//#define DEBUG_LED
-
-// global variables:
-struct timer_list gLedTimer;
-int gTimerOn = FALSE;
-int gLedCount = 0;
-
-typedef struct ledinfo
-{
- unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
- unsigned short ledActiveLow; // GPIO bit reset to turn on LED
- unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
- unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
- BOARD_LED_STATE ledState; // current led state
- BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
- int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
-} LED_INFO, *PLED_INFO;
-
-static PLED_INFO gLed = NULL;
-static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
-
-#if 0 /* BROKEN */
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-static int gLedOffInBridgeMode = 1;
-#elif defined(CONFIG_BCM96345)
-static int gLedOffInBridgeMode = 0;
-#endif
-#endif
-
-void ledTimerExpire(void);
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
-
-//**************************************************************************************
-// LED operations
-//**************************************************************************************
-
-// turn led on and set the ledState
-void ledOn(PLED_INFO pLed)
-{
- if( pLed->ledMask )
- {
- GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
- if( pLed->ledActiveLow )
- GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
- else
- GPIO->GPIOio |= pLed->ledMask; // turn on the led
- pLed->ledState = pLed->savedLedState = kLedStateOn;
- }
-}
-
-
-// turn led off and set the ledState
-void ledOff(PLED_INFO pLed)
-{
- if( pLed->ledMask )
- {
- GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
- if( pLed->ledActiveLow )
- GPIO->GPIOio |= pLed->ledMask; // turn off the led
- else
- GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
- pLed->ledState = pLed->savedLedState = kLedStateOff;
- }
-}
-
-// turn led on and set the ledState
-void ledOnFail(PLED_INFO pLed)
-{
- if( pLed->ledMaskFail )
- {
- GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
- if( pLed->ledActiveLowFail )
- GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
- else
- GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
- pLed->ledState = pLed->savedLedState = kLedStateFail;
- }
-}
-
-
-// turn led off and set the ledState
-void ledOffFail(PLED_INFO pLed)
-{
- if( pLed->ledMaskFail )
- {
- GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
- if( pLed->ledActiveLowFail )
- GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
- else
- GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
- pLed->ledState = pLed->savedLedState = kLedStateOff;
- }
-}
-
-
-// toggle the led and return the current ledState
-BOARD_LED_STATE ledToggle(PLED_INFO pLed)
-{
- GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
- if (GPIO->GPIOio & pLed->ledMask)
- {
- GPIO->GPIOio &= ~(pLed->ledMask);
- return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
- }
- else
- {
- GPIO->GPIOio |= pLed->ledMask;
- return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
- }
-}
-
-
-// led timer. Will return if timer is already on
-void ledTimerStart(void)
-{
- if (gTimerOn)
- return;
-
-#if defined(DEBUG_LED)
- printk("led: add_timer\n");
-#endif
-
- init_timer(&gLedTimer);
- gLedTimer.function = (void*)ledTimerExpire;
- gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
- add_timer (&gLedTimer);
- gTimerOn = TRUE;
-}
-
-
-// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
-// restart the timer according to ledState
-void ledTimerExpire(void)
-{
- int i;
- PLED_INFO pCurLed;
-
- gTimerOn = FALSE;
-
- for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
- {
-#if defined(DEBUG_LED)
- printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
-#endif
- switch (pCurLed->ledState)
- {
- case kLedStateOn:
- case kLedStateOff:
- case kLedStateFail:
- pCurLed->blinkCountDown = 0; // reset the blink count down
- break;
-
- case kLedStateBlinkOnce:
- ledToggle(pCurLed);
- pCurLed->blinkCountDown = 0; // reset to 0
- pCurLed->ledState = pCurLed->savedLedState;
- if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
- pCurLed->ledState == kLedStateFastBlinkContinues)
- ledTimerStart(); // start timer if in blinkContinues stats
- break;
-
- case kLedStateSlowBlinkContinues:
- if (pCurLed->blinkCountDown-- == 0)
- {
- pCurLed->blinkCountDown = kSlowBlinkCount;
- ledToggle(pCurLed);
- }
- ledTimerStart();
- break;
-
- case kLedStateFastBlinkContinues:
- if (pCurLed->blinkCountDown-- == 0)
- {
- pCurLed->blinkCountDown = kFastBlinkCount;
- ledToggle(pCurLed);
- }
- ledTimerStart();
- break;
-
- default:
- printk("Invalid state = %d\n", pCurLed->ledState);
- }
- }
-}
-
-// initialize the gLedCount and allocate and fill gLed struct
-void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
-{
- PLED_MAP_PAIR p1, p2;
- PLED_INFO pCurLed;
- int needTimer = FALSE;
- int alreadyUsed = 0;
-
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
- /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
- GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
- GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
-#endif
-
- memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
- memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
- memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
-
- gLedCount = 0;
-
- // Check for multiple LED names and multiple LED GPIO pins that share the
- // same physical board LED.
- for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
- {
- alreadyUsed = 0;
- for( p2 = cLedMapping; p2 != p1; p2++ )
- {
- if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
- (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
- {
- alreadyUsed = 1;
- break;
- }
- }
-
- if( alreadyUsed == 0 )
- gLedCount++;
- }
-
- gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
- if( gLed == NULL )
- {
- printk( "LED memory allocation error.\n" );
- return;
- }
-
- memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
-
- // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
- // (ledMask) the first defined led's ledInitState will be used.
- pCurLed = gLed;
- for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
- {
- if( (int) p1->ledName > MAX_VIRT_LEDS )
- continue;
-
- alreadyUsed = 0;
- for( p2 = cLedMapping; p2 != p1; p2++ )
- {
- if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
- (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
- {
- alreadyUsed = 1;
- break;
- }
- }
-
- if( alreadyUsed == 0 )
- {
- // Initialize the board LED for the first time.
- needTimer = initLedInfo( p1, pCurLed );
- gpVirtLeds[(int) p1->ledName] = pCurLed;
- pCurLed++;
- }
- else
- {
- PLED_INFO pLed;
- for( pLed = gLed; pLed != pCurLed; pLed++ )
- {
- // Find the LED_INFO structure that has already been initialized.
- if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
- (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
- {
- // The board LED has already been initialized but possibly
- // not completely initialized.
- if( p1->ledMask )
- {
- pLed->ledMask = p1->ledMask;
- pLed->ledActiveLow = p1->ledActiveLow;
- }
- if( p1->ledMaskFail )
- {
- pLed->ledMaskFail = p1->ledMaskFail;
- pLed->ledActiveLowFail = p1->ledActiveLowFail;
- }
- gpVirtLeds[(int) p1->ledName] = pLed;
- break;
- }
- }
- }
- }
-
- if (needTimer)
- ledTimerStart();
-
-#if defined(DEBUG_LED)
- int i;
- for (i=0; i < gLedCount; i++)
- printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
-#endif
-
-}
-
-// Initialize a structure that contains information about a physical board LED
-// control. The board LED may contain more than one GPIO pin to control a
-// normal condition (green) or a failure condition (red).
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
-{
- int needTimer = FALSE;
- pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
- pCurLed->ledMask = pCurMap->ledMask;
- pCurLed->ledActiveLow = pCurMap->ledActiveLow;
- pCurLed->ledMaskFail = pCurMap->ledMaskFail;
- pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
-
- switch (pCurLed->ledState)
- {
- case kLedStateOn:
- pCurLed->blinkCountDown = 0; // reset the blink count down
- ledOn(pCurLed);
- break;
- case kLedStateOff:
- pCurLed->blinkCountDown = 0; // reset the blink count down
- ledOff(pCurLed);
- break;
- case kLedStateFail:
- pCurLed->blinkCountDown = 0; // reset the blink count down
- ledOnFail(pCurLed);
- break;
- case kLedStateBlinkOnce:
- pCurLed->blinkCountDown = 1;
- needTimer = TRUE;
- break;
- case kLedStateSlowBlinkContinues:
- pCurLed->blinkCountDown = kSlowBlinkCount;
- needTimer = TRUE;
- break;
- case kLedStateFastBlinkContinues:
- pCurLed->blinkCountDown = kFastBlinkCount;
- needTimer = TRUE;
- break;
- default:
- printk("Invalid state = %d\n", pCurLed->ledState);
- }
-
- return( needTimer );
-}
-
-#if 0 /* BROKEN */
-// Determines if there is at least one interface in bridge mode. Bridge mode
-// is determined by the cfm convention of naming bridge interfaces nas17
-// through nas24.
-static int isBridgedProtocol(void)
-{
- extern int dev_get(const char *name);
- const int firstBridgeId = 17;
- const int lastBridgeId = 24;
- int i;
- int ret = FALSE;
- char name[16];
-
- for( i = firstBridgeId; i <= lastBridgeId; i++ )
- {
- sprintf( name, "nas%d", i );
-
- if( dev_get(name) )
- {
- ret = TRUE;
- break;
- }
- }
-
- return(ret);
-}
-#endif
-
-// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
-void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
- PLED_INFO ledInfoPtr;
-
- // do the mapping from virtual to physical led
- if( (int) ledName < MAX_VIRT_LEDS )
- ledInfoPtr = gpVirtLeds[(int) ledName];
- else
- ledInfoPtr = NULL;
-
- if (ledInfoPtr == NULL)
- return;
-
- if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
- {
- (*gLedHwFunc[(int) ledName]) (ledName, ledState);
- ledOffFail(ledInfoPtr);
- return;
- }
- else
- if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
- {
- (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
- ledOff(ledInfoPtr);
- return;
- }
-
-#if 0 /* BROKEN */
- // Do not blink the WAN Data LED if at least one interface is in bridge mode.
- if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
- {
- static int BridgedProtocol = -1;
-
- if( BridgedProtocol == -1 )
- BridgedProtocol = isBridgedProtocol();
-
- if( BridgedProtocol == TRUE )
- return;
- }
-#endif
-
- // If the state is kLedStateFail and there is not a failure LED defined
- // in the board parameters, change the state to kLedStateFastBlinkContinues.
- if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
- ledState = kLedStateFastBlinkContinues;
-
- switch (ledState)
- {
- case kLedStateOn:
- // First, turn off the complimentary (failure) LED GPIO.
- if( ledInfoPtr->ledMaskFail )
- ledOffFail(ledInfoPtr);
- else
- if( gLedHwFailFunc[(int) ledName] )
- (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
- // Next, turn on the specified LED GPIO.
- ledOn(ledInfoPtr);
- break;
-
- case kLedStateOff:
- // First, turn off the complimentary (failure) LED GPIO.
- if( ledInfoPtr->ledMaskFail )
- ledOffFail(ledInfoPtr);
- else
- if( gLedHwFailFunc[(int) ledName] )
- (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
- // Next, turn off the specified LED GPIO.
- ledOff(ledInfoPtr);
- break;
-
- case kLedStateFail:
- // First, turn off the complimentary (normal) LED GPIO.
- if( ledInfoPtr->ledMask )
- ledOff(ledInfoPtr);
- else
- if( gLedHwFunc[(int) ledName] )
- (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
-
- // Next, turn on (red) the specified LED GPIO.
- ledOnFail(ledInfoPtr);
- break;
-
- case kLedStateBlinkOnce:
- // skip blinkOnce if it is already in Slow/Fast blink continues state
- if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
- ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
- ;
- else
- {
- if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
- {
- ledToggle(ledInfoPtr);
- ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
- ledInfoPtr->ledState = kLedStateBlinkOnce;
- ledTimerStart();
- }
- }
- break;
-
- case kLedStateSlowBlinkContinues:
- ledInfoPtr->blinkCountDown = kSlowBlinkCount;
- ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
- ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
- ledTimerStart();
- break;
-
- case kLedStateFastBlinkContinues:
- ledInfoPtr->blinkCountDown = kFastBlinkCount;
- ledInfoPtr->ledState = kLedStateFastBlinkContinues;
- ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
- ledTimerStart();
- break;
-
- default:
- printk("Invalid led state\n");
- }
-}
-
-// This function is called for an LED that is controlled by hardware.
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
- HANDLE_LED_FUNC ledHwFunc, int ledFailType )
-{
- if( (int) ledName < MAX_VIRT_LEDS )
- {
- if( ledFailType == 1 )
- gLedHwFailFunc[(int) ledName] = ledHwFunc;
- else
- gLedHwFunc[(int) ledName] = ledHwFunc;
- }
-}
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-/* Includes. */
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/pagemap.h>
-#include <asm/uaccess.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/if.h>
-#include <linux/spinlock.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-#include <bcmTag.h>
-#include "boardparms.h"
-#include "bcm_intr.h"
-#include "board.h"
-#include "bcm_map_part.h"
-
-static DEFINE_SPINLOCK(board_lock);
-
-/* Typedefs. */
-#if defined (NON_CONSECUTIVE_MAC)
-// used to be the last octet. Now changed to the first 5 bits of the the forth octet
-// to reduced the duplicated MAC addresses.
-#define CHANGED_OCTET 3
-#define SHIFT_BITS 3
-#else
-#define CHANGED_OCTET 1
-#define SHIFT_BITS 0
-#endif
-
-typedef struct
-{
- unsigned long ulId;
- char chInUse;
- char chReserved[3];
-} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
-
-typedef struct
-{
- unsigned long ulSdramSize;
- unsigned long ulPsiSize;
- unsigned long ulNumMacAddrs;
- unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
- MAC_ADDR_INFO MacAddrs[1];
-} NVRAM_INFO, *PNVRAM_INFO;
-
-typedef struct
-{
- unsigned long eventmask;
-} BOARD_IOC, *PBOARD_IOC;
-
-
-/*Dyinggasp callback*/
-typedef void (*cb_dgasp_t)(void *arg);
-typedef struct _CB_DGASP__LIST
-{
- struct list_head list;
- char name[IFNAMSIZ];
- cb_dgasp_t cb_dgasp_fn;
- void *context;
-}CB_DGASP_LIST , *PCB_DGASP_LIST;
-
-
-static LED_MAP_PAIR LedMapping[] =
-{ // led name Initial state physical pin (ledMask)
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0},
- {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
-};
-
-/* Externs. */
-extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
-extern unsigned int nr_free_pages (void);
-extern const char *get_system_type(void);
-extern void kerSysFlashInit(void);
-extern unsigned long get_nvram_start_addr(void);
-extern unsigned long get_scratch_pad_start_addr(void);
-extern unsigned long getMemorySize(void);
-extern void __init boardLedInit(PLED_MAP_PAIR);
-extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
- HANDLE_LED_FUNC ledHwFunc, int ledFailType );
-
-/* Prototypes. */
-void __init InitNvramInfo( void );
-
-/* DyingGasp function prototype */
-static void __init kerSysDyingGaspMapIntr(void);
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id);
-static void __init kerSysInitDyingGaspHandler( void );
-static void __exit kerSysDeinitDyingGaspHandler( void );
-/* -DyingGasp function prototype - */
-
-static PNVRAM_INFO g_pNvramInfo = NULL;
-static int g_ledInitialized = 0;
-static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
-
-static int g_wakeup_monitor = 0;
-static struct file *g_monitor_file = NULL;
-static struct task_struct *g_monitor_task = NULL;
-static unsigned int (*g_orig_fop_poll)
- (struct file *, struct poll_table_struct *) = NULL;
-
-void kerSysMipsSoftReset(void)
-{
- if (PERF->RevID == 0x634800A1) {
- typedef void (*FNPTR) (void);
- FNPTR bootaddr = (FNPTR) FLASH_BASE;
- int i;
-
- /* Disable interrupts. */
- //cli();
- spin_lock_irq(&board_lock);
-
- /* Reset all blocks. */
- PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
- for( i = 0; i < 1000000; i++ )
- ;
- PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
- /* Jump to the power on address. */
- (*bootaddr) ();
- }
- else
- PERF->pll_control |= SOFT_RESET; // soft reset mips
-}
-
-
-int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
-{
- int nRet = 0;
- PMAC_ADDR_INFO pMai = NULL;
- PMAC_ADDR_INFO pMaiFreeNoId = NULL;
- PMAC_ADDR_INFO pMaiFreeId = NULL;
- unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
-
- /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
- * * à relire plusieurs fois */
- /* inv_xde */
-#if 0
- if (boot_loader_type == BOOT_CFE)
- memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
- NVRAM_MAC_ADDRESS_LEN );
- else {
-#endif
- pucaMacAddr[0] = 0x00;
- pucaMacAddr[1] = 0x07;
- pucaMacAddr[2] = 0x3A;
- pucaMacAddr[3] = 0xFF;
- pucaMacAddr[4] = 0xFF;
- pucaMacAddr[5] = 0xFF;
-#if 0
- }
-#endif
-
- return nRet;
-} /* kerSysGetMacAddr */
-
-int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
-{
- int nRet = -EINVAL;
- unsigned long ulIdx = 0;
- int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
- g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
-
- // if overflow 255 (negitive), add 256 to have the correct index
- if (idx < 0)
- idx += 256;
- ulIdx = (unsigned long) (idx >> SHIFT_BITS);
-
- if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
- {
- PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
- if( pMai->chInUse == 1 )
- {
- pMai->chInUse = 0;
- nRet = 0;
- }
- }
-
- return( nRet );
-} /* kerSysReleaseMacAddr */
-
-int kerSysGetSdramSize( void )
-{
- if (boot_loader_type == BOOT_CFE) {
- return( (int) g_pNvramInfo->ulSdramSize );
- }
- else {
- printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
- return((int)getMemorySize() + 0x00040000);
- }
-} /* kerSysGetSdramSize */
-
-
-void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
- if (g_ledInitialized)
- boardLedCtrl(ledName, ledState);
-}
-
-unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
-{
- int mask = (*g_orig_fop_poll) (f, t);
-
- if( g_wakeup_monitor == 1 && g_monitor_file == f )
- {
- /* If g_wakeup_monitor is non-0, the user mode application needs to
- * return from a blocking select function. Return POLLPRI which will
- * cause the select to return with the exception descriptor set.
- */
- mask |= POLLPRI;
- g_wakeup_monitor = 0;
- }
-
- return( mask );
-}
-
-/* Put the user mode application that monitors link state on a run queue. */
-void kerSysWakeupMonitorTask( void )
-{
- g_wakeup_monitor = 1;
- if( g_monitor_task )
- wake_up_process( g_monitor_task );
-}
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-int kerSysGetResetHold(void)
-{
- unsigned short gpio;
-
- if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
- {
- unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
- volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-
- if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
- {
- gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
- gpio_reg = &GPIO->GPIOio_high;
- }
- //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
- if(*gpio_reg & gpio_mask) //press down
- return RESET_BUTTON_UP;
- }
- return RESET_BUTTON_PRESSDOWN;
-}
-//<<JUNHON, 2004/09/15
-
-/***************************************************************************
- * Dying gasp ISR and functions.
- ***************************************************************************/
-#define KERSYS_DBG printk
-
-#if defined(CONFIG_BCM96345)
-#define CYCLE_PER_US 70
-#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-/* The BCM6348 cycles per microsecond is really variable since the BCM6348
- * MIPS speed can vary depending on the PLL settings. However, an appoximate
- * value of 120 will still work OK for the test being done.
- */
-#define CYCLE_PER_US 120
-#endif
-#define DG_GLITCH_TO (100*CYCLE_PER_US)
-
-static void __init kerSysDyingGaspMapIntr()
-{
- unsigned long ulIntr;
-
-#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
- if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
- BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
- BcmHalInterruptEnable( INTERRUPT_ID_DG );
- }
-#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
- if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
- ulIntr += INTERRUPT_ID_EXTERNAL_0;
- BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
- BcmHalInterruptEnable( ulIntr );
- }
-#endif
-
-}
-
-void kerSysSetWdTimer(ulong timeUs)
-{
- TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
- TIMER->WatchDogCtl = 0xFF00;
- TIMER->WatchDogCtl = 0x00FF;
-}
-
-ulong kerSysGetCycleCount(void)
-{
- ulong cnt;
-#ifdef _WIN32_WCE
- cnt = 0;
-#else
- __asm volatile("mfc0 %0, $9":"=d"(cnt));
-#endif
- return(cnt);
-}
-
-static Bool kerSysDyingGaspCheckPowerLoss(void)
-{
- ulong clk0;
- ulong ulIntr;
-
- ulIntr = 0;
- clk0 = kerSysGetCycleCount();
-
- UART->Data = 'D';
- UART->Data = '%';
- UART->Data = 'G';
-
-#if defined(CONFIG_BCM96345)
- BpGetAdslDyingGaspExtIntr( &ulIntr );
-
- do {
- ulong clk1;
-
- clk1 = kerSysGetCycleCount(); /* time cleared */
- /* wait a little to get new reading */
- while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
- ;
- } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
- if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
- BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
- KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
- return 0;
- }
-#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
- do {
- ulong clk1;
-
- clk1 = kerSysGetCycleCount(); /* time cleared */
- /* wait a little to get new reading */
- while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
- ;
- } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
- if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
- BcmHalInterruptEnable( INTERRUPT_ID_DG );
- KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
- return 0;
- }
-#endif
- return 1;
-}
-
-static void kerSysDyingGaspShutdown( void )
-{
- kerSysSetWdTimer(1000000);
-#if defined(CONFIG_BCM96345)
- PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
-#elif defined(CONFIG_BCM96348)
- PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
-#endif
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id)
-#else
-static unsigned int kerSysDyingGaspIsr(void)
-#endif
-{
- struct list_head *pos;
- CB_DGASP_LIST *tmp, *dsl = NULL;
-
- if (kerSysDyingGaspCheckPowerLoss()) {
-
- /* first to turn off everything other than dsl */
- list_for_each(pos, &g_cb_dgasp_list_head->list) {
- tmp = list_entry(pos, CB_DGASP_LIST, list);
- if(strncmp(tmp->name, "dsl", 3)) {
- (tmp->cb_dgasp_fn)(tmp->context);
- }else {
- dsl = tmp;
- }
- }
-
- /* now send dgasp */
- if(dsl)
- (dsl->cb_dgasp_fn)(dsl->context);
-
- /* reset and shutdown system */
- kerSysDyingGaspShutdown();
- }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-return( IRQ_HANDLED );
-#else
- return( 1 );
-#endif
-}
-
-static void __init kerSysInitDyingGaspHandler( void )
-{
- CB_DGASP_LIST *new_node;
-
- if( g_cb_dgasp_list_head != NULL) {
- printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
- return;
- }
- new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
- memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
- INIT_LIST_HEAD(&new_node->list);
- g_cb_dgasp_list_head = new_node;
-
-} /* kerSysInitDyingGaspHandler */
-
-static void __exit kerSysDeinitDyingGaspHandler( void )
-{
- struct list_head *pos;
- CB_DGASP_LIST *tmp;
-
- if(g_cb_dgasp_list_head == NULL)
- return;
-
- list_for_each(pos, &g_cb_dgasp_list_head->list) {
- tmp = list_entry(pos, CB_DGASP_LIST, list);
- list_del(pos);
- kfree(tmp);
- }
-
- kfree(g_cb_dgasp_list_head);
- g_cb_dgasp_list_head = NULL;
-
-} /* kerSysDeinitDyingGaspHandler */
-
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
-{
- CB_DGASP_LIST *new_node;
-
- if( g_cb_dgasp_list_head == NULL) {
- printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
- return;
- }
-
- if( devname == NULL || cbfn == NULL ) {
- printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
- return;
- }
-
- new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
- memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
- INIT_LIST_HEAD(&new_node->list);
- strncpy(new_node->name, devname, IFNAMSIZ);
- new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
- new_node->context = context;
- list_add(&new_node->list, &g_cb_dgasp_list_head->list);
-
- printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
-
-} /* kerSysRegisterDyingGaspHandler */
-
-void kerSysDeregisterDyingGaspHandler(char *devname)
-{
- struct list_head *pos;
- CB_DGASP_LIST *tmp;
-
- if(g_cb_dgasp_list_head == NULL) {
- printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
- return;
- }
-
- if(devname == NULL) {
- printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
- return;
- }
-
- printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
-
- list_for_each(pos, &g_cb_dgasp_list_head->list) {
- tmp = list_entry(pos, CB_DGASP_LIST, list);
- if(!strcmp(tmp->name, devname)) {
- list_del(pos);
- kfree(tmp);
- printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
- return;
- }
- }
- printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
-
-} /* kerSysDeregisterDyingGaspHandler */
-
-//EXPORT_SYMBOL(kerSysNvRamGet);
-EXPORT_SYMBOL(kerSysGetMacAddress);
-EXPORT_SYMBOL(kerSysReleaseMacAddress);
-EXPORT_SYMBOL(kerSysGetSdramSize);
-EXPORT_SYMBOL(kerSysLedCtrl);
-EXPORT_SYMBOL(kerSysGetResetHold);
-EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
-EXPORT_SYMBOL(BpGetBoardIds);
-EXPORT_SYMBOL(BpGetSdramSize);
-EXPORT_SYMBOL(BpGetPsiSize);
-EXPORT_SYMBOL(BpGetEthernetMacInfo);
-EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
-EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
-EXPORT_SYMBOL(BpGetVoipResetGpio);
-EXPORT_SYMBOL(BpGetVoipIntrGpio);
-EXPORT_SYMBOL(BpGetPcmciaResetGpio);
-EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
-EXPORT_SYMBOL(BpGetAdslLedGpio);
-EXPORT_SYMBOL(BpGetAdslFailLedGpio);
-EXPORT_SYMBOL(BpGetWirelessLedGpio);
-EXPORT_SYMBOL(BpGetUsbLedGpio);
-EXPORT_SYMBOL(BpGetHpnaLedGpio);
-EXPORT_SYMBOL(BpGetWanDataLedGpio);
-EXPORT_SYMBOL(BpGetPppLedGpio);
-EXPORT_SYMBOL(BpGetPppFailLedGpio);
-EXPORT_SYMBOL(BpGetVoipLedGpio);
-EXPORT_SYMBOL(BpGetWirelessExtIntr);
-EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
-EXPORT_SYMBOL(BpGetVoipExtIntr);
-EXPORT_SYMBOL(BpGetHpnaExtIntr);
-EXPORT_SYMBOL(BpGetHpnaChipSelect);
-EXPORT_SYMBOL(BpGetVoipChipSelect);
-EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
-EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
-EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
-EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysGetCycleCount);
-EXPORT_SYMBOL(kerSysSetWdTimer);
-EXPORT_SYMBOL(kerSysWakeupMonitorTask);
-
+++ /dev/null
-/*
-<:copyright-gpl
-
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-
-:>
-*/
-/**************************************************************************
- * File Name : boardparms.c
- *
- * Description: This file contains the implementation for the BCM63xx board
- * parameter access functions.
- *
- * Updates : 07/14/2003 Created.
- ***************************************************************************/
-
-/* Includes. */
-#include "boardparms.h"
-
-/* Defines. */
-
-/* Default psi size in K bytes */
-#define BP_PSI_DEFAULT_SIZE 24
-
-/* Typedefs */
-typedef struct boardparameters
-{
- char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
- ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
- VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
- unsigned short usSdramSize; /* SDRAM size and type */
- unsigned short usPsiSize; /* persistent storage in K bytes */
- unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
- unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
- unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
- unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
- unsigned short usGpioUartRts; /* GPIO pin or not defined */
- unsigned short usGpioUartCts; /* GPIO pin or not defined */
- unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
- unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
- unsigned short usGpioLedWireless; /* GPIO pin or not defined */
- unsigned short usGpioLedUsb; /* GPIO pin or not defined */
- unsigned short usGpioLedHpna; /* GPIO pin or not defined */
- unsigned short usGpioLedWanData; /* GPIO pin or not defined */
- unsigned short usGpioLedPpp; /* GPIO pin or not defined */
- unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
- unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
- unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
- unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
- unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
- unsigned short usExtIntrWireless; /* ext intr or not defined */
- unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
- unsigned short usExtIntrHpna; /* ext intr or not defined */
- unsigned short usCsHpna; /* chip select not defined */
- unsigned short usAntInUseWireless; /* antenna in use or not defined */
- unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
- unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
- unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
-} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-
-/* Variables */
-#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-static BOARD_PARAMETERS g_bcm96338sv =
-{
- "96338SV", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_NOT_DEFINED, /* usGpioLedWanData */
- BP_NOT_DEFINED, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
- BP_NOT_DEFINED, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-static BOARD_PARAMETERS g_bcm96338l2m8m =
-{
- "96338L-2M-8M", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-static PBOARD_PARAMETERS g_BoardParms[] =
- {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-#endif
-
-#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-static BOARD_PARAMETERS g_bcm96345r =
-{
- "96345R", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_GPIO_11_AH, /* usGpioRj11InnerPair */
- BP_GPIO_12_AH, /* usGpioRj11OuterPair */
- BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_GPIO_8_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_8_AH, /* usGpioLedWanData */
- BP_GPIO_9_AH, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_10_AH, /* usGpioLedBlAlarm */
- BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_8_AH, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345gw2 =
-{
- /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
- * Reset or RTS.
- */
- "96345GW2", /* szBoardId */
- {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_GPIO_0_AH, /* usGpioPhySpiSck */
- BP_GPIO_4_AH, /* usGpioPhySpiSs */
- BP_GPIO_12_AH, /* usGpioPhySpiMosi */
- BP_GPIO_11_AH, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x04, /* numSwitchPorts */
- BP_ENET_CONFIG_GPIO, /* usConfigType */
- BP_ENET_REVERSE_MII}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_1, /* usExtIntrVoip */
- BP_GPIO_6_AH, /* usGpioVoipReset */
- BP_GPIO_15_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
- BP_GPIO_2_AH, /* usGpioPcmciaReset */
- BP_GPIO_13_AH, /* usGpioUartRts */
- BP_GPIO_9_AH, /* usGpioUartCts */
- BP_GPIO_8_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_GPIO_7_AH, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_8_AH, /* usGpioLedWanData */
- BP_NOT_DEFINED, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_10_AH, /* usGpioLedBlAlarm */
- BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_8_AH, /* usGpioLedBlStop */
- BP_EXT_INTR_2, /* usExtIntrWireless */
- BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345gw =
-{
- "96345GW", /* szBoardId */
- {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x04, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_1, /* usExtIntrVoip */
- BP_GPIO_6_AH, /* usGpioVoipReset */
- BP_GPIO_15_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_GPIO_11_AH, /* usGpioRj11InnerPair */
- BP_GPIO_1_AH, /* usGpioRj11OuterPair */
- BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
- BP_GPIO_2_AH, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_GPIO_8_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_GPIO_10_AH, /* usGpioLedWireless */
- BP_GPIO_7_AH, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_8_AH, /* usGpioLedWanData */
- BP_NOT_DEFINED, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_9_AH, /* usGpioLedBlAlarm */
- BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_8_AH, /* usGpioLedBlStop */
- BP_EXT_INTR_2, /* usExtIntrWireless */
- BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
- BP_EXT_INTR_3, /* usExtIntrHpna */
- BP_CS_1, /* usCsHpna */
- BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96335r =
-{
- "96335R", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_GPIO_9_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_9_AH, /* usGpioLedWanData */
- BP_GPIO_8_AH, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_10_AH, /* usGpioLedBlAlarm */
- BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_9_AH, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345r0 =
-{
- "96345R0", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_GPIO_8_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_9_AH, /* usGpioLedWanData */
- BP_GPIO_9_AH, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_9_AH, /* usGpioLedBlAlarm */
- BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_8_AH, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345rs =
-{
- "96345RS", /* szBoardId */
- {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_GPIO_11_AH, /* usGpioRj11InnerPair */
- BP_GPIO_12_AH, /* usGpioRj11OuterPair */
- BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_GPIO_8_AH, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_8_AH, /* usGpioLedWanData */
- BP_GPIO_9_AH, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_GPIO_10_AH, /* usGpioLedBlAlarm */
- BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
- BP_GPIO_8_AH, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
- {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
- &g_bcm96345rs, 0};
-#endif
-
-#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-
-static BOARD_PARAMETERS g_bcm96348r =
-{
- "96348R", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY}}, /* ucPhyType */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348lv =
-{
- "96348LV", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
- 0x02, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_GPIO_5_AL, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}}, /* usReverseMii */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw =
-{
- "96348GW", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x03, /* numSwitchPorts */
- BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
- BP_ENET_REVERSE_MII}}, /* usReverseMii */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_2, /* usExtIntrVoip */
- BP_GPIO_6_AH, /* usGpioVoipReset */
- BP_GPIO_34_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_10 =
-{
- "96348GW-10", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x03, /* numSwitchPorts */
- BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
- BP_ENET_REVERSE_MII}}, /* usReverseMii */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_2, /* usExtIntrVoip */
- BP_GPIO_6_AH, /* usGpioVoipReset */
- BP_GPIO_34_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw_11 =
-{
- "96348GW-11", /* szBoardId */
- {{BP_ENET_NO_PHY}, /* ucPhyType */
- {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x04, /* numSwitchPorts */
- BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
- BP_ENET_REVERSE_MII}}, /* usReverseMii */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348sv =
-{
- "96348SV", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
- 0x1f, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}}, /* usReverseMii */
- {{BP_VOIP_NO_DSP}, /* ucDspType */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_NOT_DEFINED, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_NOT_DEFINED, /* usGpioLedWanData */
- BP_NOT_DEFINED, /* usGpioLedPpp */
- BP_NOT_DEFINED, /* usGpioLedPppFail */
- BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
- BP_NOT_DEFINED, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-{
- "96348GW-DualDSP", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x03, /* numSwitchPorts */
- BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
- BP_ENET_REVERSE_MII}}, /* usReverseMii */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_2, /* usExtIntrVoip */
- BP_UNEQUIPPED, /* usGpioVoipReset */
- BP_GPIO_34_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_DSP, /* ucDspType */
- 0x01, /* ucDspAddress */
- BP_EXT_INTR_3, /* usExtIntrVoip */
- BP_UNEQUIPPED , /* usGpioVoipReset */
- BP_GPIO_35_AH, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_3}}, /* usCsVoip */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcmCustom_01 =
-{
- "BCMCUST_01", /* szBoardId */
- {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
- 0x01, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_MDIO, /* usConfigType */
- BP_NOT_DEFINED}, /* usReverseMii */
- {BP_ENET_NO_PHY, /* ucPhyType */
- 0x00, /* ucPhyAddress */
- BP_NOT_DEFINED, /* usGpioPhySpiSck */
- BP_NOT_DEFINED, /* usGpioPhySpiSs */
- BP_NOT_DEFINED, /* usGpioPhySpiMosi */
- BP_NOT_DEFINED, /* usGpioPhySpiMiso */
- BP_NOT_DEFINED, /* usGpioPhyReset */
- 0x01, /* numSwitchPorts */
- BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
- BP_ENET_REVERSE_MII}}, /* usReverseMii */
- {{BP_VOIP_DSP, /* ucDspType */
- 0x00, /* ucDspAddress */
- BP_EXT_INTR_2, /* usExtIntrVoip */
- BP_GPIO_36_AH, /* usGpioVoipReset */
- BP_GPIO_34_AL, /* usGpioVoipIntr */
- BP_NOT_DEFINED, /* usGpioLedVoip */
- BP_CS_2}, /* usCsVoip */
- {BP_VOIP_NO_DSP}}, /* ucDspType */
- BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
- BP_PSI_DEFAULT_SIZE, /* usPsiSize */
- BP_NOT_DEFINED, /* usGpioRj11InnerPair */
- BP_NOT_DEFINED, /* usGpioRj11OuterPair */
- BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
- BP_NOT_DEFINED, /* usGpioPcmciaReset */
- BP_NOT_DEFINED, /* usGpioUartRts */
- BP_NOT_DEFINED, /* usGpioUartCts */
- BP_NOT_DEFINED, /* usGpioLedAdsl */
- BP_GPIO_2_AL, /* usGpioLedAdslFail */
- BP_NOT_DEFINED, /* usGpioLedWireless */
- BP_NOT_DEFINED, /* usGpioLedUsb */
- BP_NOT_DEFINED, /* usGpioLedHpna */
- BP_GPIO_3_AL, /* usGpioLedWanData */
- BP_GPIO_3_AL, /* usGpioLedPpp */
- BP_GPIO_4_AL, /* usGpioLedPppFail */
- BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
- BP_NOT_DEFINED, /* usGpioLedBlAlarm */
- BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
- BP_GPIO_1_AL, /* usGpioLedBlStop */
- BP_NOT_DEFINED, /* usExtIntrWireless */
- BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
- BP_NOT_DEFINED, /* usExtIntrHpna */
- BP_NOT_DEFINED, /* usCsHpna */
- BP_NOT_DEFINED, /* usAntInUseWireless */
- BP_NOT_DEFINED, /* usGpioSesBtnWireless */
- BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
- BP_NOT_DEFINED /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
- {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
- &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
- &g_bcmCustom_01, 0};
-#endif
-
-static PBOARD_PARAMETERS g_pCurrentBp = 0;
-
-/**************************************************************************
- * Name : bpstrcmp
- *
- * Description: String compare for this file so it does not depend on an OS.
- * (Linux kernel and CFE share this source file.)
- *
- * Parameters : [IN] dest - destination string
- * [IN] src - source string
- *
- * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
- ***************************************************************************/
-static int bpstrcmp(const char *dest,const char *src);
-static int bpstrcmp(const char *dest,const char *src)
-{
- while (*src && *dest)
- {
- if (*dest < *src) return -1;
- if (*dest > *src) return 1;
- dest++;
- src++;
- }
-
- if (*dest && !*src) return 1;
- if (!*dest && *src) return -1;
- return 0;
-} /* bpstrcmp */
-
-/**************************************************************************
- * Name : BpGetVoipDspConfig
- *
- * Description: Gets the DSP configuration from the board parameter
- * structure for a given DSP index.
- *
- * Parameters : [IN] dspNum - DSP index (number)
- *
- * Returns : Pointer to DSP configuration block if found/valid, NULL
- * otherwise.
- ***************************************************************************/
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-{
- VOIP_DSP_INFO *pDspConfig = 0;
- int i;
-
- if( g_pCurrentBp )
- {
- for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
- {
- if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
- g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
- {
- pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
- break;
- }
- }
- }
-
- return pDspConfig;
-}
-
-
-/**************************************************************************
- * Name : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- * specified board id string and assigns it to a global, static
- * variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- * have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId )
-{
- int nRet = BP_BOARD_ID_NOT_FOUND;
- PBOARD_PARAMETERS *ppBp;
-
- for( ppBp = g_BoardParms; *ppBp; ppBp++ )
- {
- if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
- {
- g_pCurrentBp = *ppBp;
- nRet = BP_SUCCESS;
- break;
- }
- }
-
- return( nRet );
-} /* BpSetBoardId */
-
-/**************************************************************************
- * Name : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- * strings are returned in. Each id starts at BP_BOARD_ID_LEN
- * boundary.
- * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- * were allocated in pszBoardIds.
- *
- * Returns : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-{
- PBOARD_PARAMETERS *ppBp;
- int i;
- char *src;
- char *dest;
-
- for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
- i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
- {
- dest = pszBoardIds;
- src = (*ppBp)->szBoardId;
- while( *src )
- *dest++ = *src++;
- *dest = '\0';
- }
-
- return( i );
-} /* BpGetBoardIds */
-
-/**************************************************************************
- * Name : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- * buffers.
- * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- * are pointed to by pEnetInfos.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-{
- int i, nRet;
-
- if( g_pCurrentBp )
- {
- for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
- {
- if( i < BP_MAX_ENET_MACS )
- {
- unsigned char *src = (unsigned char *)
- &g_pCurrentBp->EnetMacInfos[i];
- unsigned char *dest = (unsigned char *) pEnetInfos;
- int len = sizeof(ETHERNET_MAC_INFO);
- while( len-- )
- *dest++ = *src++;
- }
- else
- pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
- }
-
- nRet = BP_SUCCESS;
- }
- else
- {
- for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
- pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetEthernetMacInfo */
-
-/**************************************************************************
- * Name : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- * SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- * is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulSdramSize = g_pCurrentBp->usSdramSize;
- nRet = BP_SUCCESS;
- }
- else
- {
- *pulSdramSize = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetSdramSize */
-
-/**************************************************************************
- * Name : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- * storage size is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulPsiSize = g_pCurrentBp->usPsiSize;
- nRet = BP_SUCCESS;
- }
- else
- {
- *pulPsiSize = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetPsiSize */
-
-/**************************************************************************
- * Name : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- * between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- * GPIO pin is returned in.
- * [OUT] pusOuter - Address of short word that the RJ11 outer pair
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
- unsigned short *pusOuter )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
- *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-
- if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
- g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusInner = *pusOuter = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetRj11InnerOuterPairGpios */
-
-/**************************************************************************
- * Name : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- * and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- * reset button GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-
- if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetPressAndHoldResetGpio */
-
-/**************************************************************************
- * Name : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
- if( pDspInfo )
- {
- *pusValue = pDspInfo->usGpioVoipReset;
-
- if( *pusValue != BP_NOT_DEFINED ||
- *pusValue == BP_UNEQUIPPED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_FOUND;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetVoipResetGpio */
-
-/**************************************************************************
- * Name : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
- if( pDspInfo )
- {
- *pusValue = pDspInfo->usGpioVoipIntr;
-
- if( *pusValue != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_FOUND;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetVoipIntrGpio */
-
-/**************************************************************************
- * Name : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-
- if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetPcmciaResetGpio */
-
-/**************************************************************************
- * Name : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- * UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- * pin is returned in.
- * [OUT] pusCts - Address of short word that the UART CTS GPIO
- * pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, board id input string does not
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusRts = g_pCurrentBp->usGpioUartRts;
- *pusCts = g_pCurrentBp->usGpioUartCts;
-
- if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
- g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusRts = *pusCts = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetUartRtsCtsGpios */
-
-/**************************************************************************
- * Name : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedAdsl;
-
- if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetAdslLedGpio */
-
-/**************************************************************************
- * Name : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-
- if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetAdslFailLedGpio */
-
-/**************************************************************************
- * Name : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedWireless;
-
- if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetWirelessLedGpio */
-
-/**************************************************************************
- * Name : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- * is in use.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usAntInUseWireless;
-
- if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetWirelessAntInUse */
-
-/**************************************************************************
- * Name : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-
- if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetWirelessSesBtnGpio */
-
-/**************************************************************************
- * Name : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the
- * Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * external interrup is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-
- if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-
-} /* BpGetWirelessSesExtIntr */
-
-/**************************************************************************
- * Name : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * Led GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-
- if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-
-} /* BpGetWirelessSesLedGpio */
-
-/**************************************************************************
- * Name : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedUsb;
-
- if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetUsbLedGpio */
-
-/**************************************************************************
- * Name : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedHpna;
-
- if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetHpnaLedGpio */
-
-/**************************************************************************
- * Name : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedWanData;
-
- if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetWanDataLedGpio */
-
-/**************************************************************************
- * Name : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedPpp;
-
- if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetPppLedGpio */
-
-/**************************************************************************
- * Name : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedPppFail;
-
- if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetPppFailLedGpio */
-
-/**************************************************************************
- * Name : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- * on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-
- if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetBootloaderPowerOn */
-
-/**************************************************************************
- * Name : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- * LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-
- if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetBootloaderAlarmLedGpio */
-
-/**************************************************************************
- * Name : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- * configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- * configuration LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-
- if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetBootloaderResetCfgLedGpio */
-
-/**************************************************************************
- * Name : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- * into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- * bootloader LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pusValue = g_pCurrentBp->usGpioLedBlStop;
-
- if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetBootloaderStopLedGpio */
-
-/**************************************************************************
- * Name : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- *
- * Note : The VoIP structure would allow for having one LED per DSP
- * however, the board initialization function assumes only one
- * LED per functionality (ie one LED for VoIP). Therefore in
- * order to keep this tidy and simple we do not make usage of the
- * one-LED-per-DSP function. Instead, we assume that the LED for
- * VoIP is unique and associated with DSP 0 (always present on
- * any VoIP platform). If changing this to a LED-per-DSP function
- * then one need to update the board initialization driver in
- * bcmdrivers\opensource\char\board\bcm963xx\impl1
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-
- if( pDspInfo )
- {
- *pusValue = pDspInfo->usGpioLedVoip;
-
- if( *pusValue != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_FOUND;
- }
- }
- else
- {
- *pusValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetVoipLedGpio */
-
-/**************************************************************************
- * Name : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulValue = g_pCurrentBp->usExtIntrWireless;
-
- if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetWirelessExtIntr */
-
-/**************************************************************************
- * Name : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- * number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-
- if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetAdslDyingGaspExtIntr */
-
-/**************************************************************************
- * Name : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * external interrupt number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
- if( pDspInfo )
- {
- *pulValue = pDspInfo->usExtIntrVoip;
-
- if( *pulValue != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_FOUND;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetVoipExtIntr */
-
-/**************************************************************************
- * Name : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulValue = g_pCurrentBp->usExtIntrHpna;
-
- if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetHpnaExtIntr */
-
-/**************************************************************************
- * Name : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * chip select number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- *pulValue = g_pCurrentBp->usCsHpna;
-
- if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetHpnaChipSelect */
-
-/**************************************************************************
- * Name : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * chip select number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-{
- int nRet;
-
- if( g_pCurrentBp )
- {
- VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
- if( pDspInfo )
- {
- *pulValue = pDspInfo->usCsVoip;
-
- if( *pulValue != BP_NOT_DEFINED )
- {
- nRet = BP_SUCCESS;
- }
- else
- {
- nRet = BP_VALUE_NOT_DEFINED;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_FOUND;
- }
- }
- else
- {
- *pulValue = BP_NOT_DEFINED;
- nRet = BP_BOARD_ID_NOT_SET;
- }
-
- return( nRet );
-} /* BpGetVoipChipSelect */
-
+++ /dev/null
-/*
-<:copyright-gpl
-
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-
-:>
-*/
-/**************************************************************************
- * File Name : boardparms.h
- *
- * Description: This file contains definitions and function prototypes for
- * the BCM63xx board parameter access functions.
- *
- * Updates : 07/14/2003 Created.
- ***************************************************************************/
-
-#if !defined(_BOARDPARMS_H)
-#define _BOARDPARMS_H
-
-/* Return codes. */
-#define BP_SUCCESS 0
-#define BP_BOARD_ID_NOT_FOUND 1
-#define BP_VALUE_NOT_DEFINED 2
-#define BP_BOARD_ID_NOT_SET 3
-
-/* Values for BpGetSdramSize. */
-#define BP_MEMORY_8MB_1_CHIP 0
-#define BP_MEMORY_16MB_1_CHIP 1
-#define BP_MEMORY_32MB_1_CHIP 2
-#define BP_MEMORY_64MB_2_CHIP 3
-#define BP_MEMORY_32MB_2_CHIP 4
-#define BP_MEMORY_16MB_2_CHIP 5
-
-/* Values for EthernetMacInfo PhyType. */
-#define BP_ENET_NO_PHY 0
-#define BP_ENET_INTERNAL_PHY 1
-#define BP_ENET_EXTERNAL_PHY 2
-#define BP_ENET_EXTERNAL_SWITCH 3
-
-/* Values for EthernetMacInfo Configuration type. */
-#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
-#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
-
-/* Values for EthernetMacInfo Reverse MII. */
-#define BP_ENET_NO_REVERSE_MII 0
-#define BP_ENET_REVERSE_MII 1
-
-/* Values for VoIPDSPInfo DSPType. */
-#define BP_VOIP_NO_DSP 0
-#define BP_VOIP_DSP 1
-
-
-/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-#define BP_ACTIVE_MASK 0x8000
-#define BP_ACTIVE_HIGH 0x0000
-#define BP_ACTIVE_LOW 0x8000
-#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
-#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
-#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
-#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
-#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
-#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
-#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
-#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
-#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
-#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
-#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
-#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
-#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
-#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
-#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
-#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
-#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
-#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
-#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
-#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
-#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
-#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
-#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
-#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
-#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
-#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
-#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
-#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
-#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
-#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
-#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
-#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
-#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
-#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
-#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
-#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
-#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
-#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
-#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
-#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
-#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
-#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
-#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
-#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
-#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
-#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
-#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
-#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
-#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
-#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
-#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
-#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
-#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
-#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
-#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
-#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
-#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
-#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
-#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
-#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
-#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
-#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
-#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
-#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
-#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
-#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
-#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
-#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
-#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
-#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
-#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
-#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
-#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
-#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
-
-/* Values for external interrupt assignments. */
-#define BP_EXT_INTR_0 0
-#define BP_EXT_INTR_1 1
-#define BP_EXT_INTR_2 2
-#define BP_EXT_INTR_3 3
-
-/* Values for chip select assignments. */
-#define BP_CS_0 0
-#define BP_CS_1 1
-#define BP_CS_2 2
-#define BP_CS_3 3
-
-/* Value for GPIO and external interrupt fields that are not used. */
-#define BP_NOT_DEFINED 0xffff
-#define BP_HW_DEFINED 0xfff0
-#define BP_UNEQUIPPED 0xfff1
-
-/* Maximum size of the board id string. */
-#define BP_BOARD_ID_LEN 16
-
-/* Maximum number of Ethernet MACs. */
-#define BP_MAX_ENET_MACS 2
-
-/* Maximum number of VoIP DSPs. */
-#define BP_MAX_VOIP_DSP 2
-
-/* Wireless Antenna Settings. */
-#define BP_WLAN_ANT_MAIN 0
-#define BP_WLAN_ANT_AUX 1
-#define BP_WLAN_ANT_BOTH 3
-
-#if !defined(__ASSEMBLER__)
-
-/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
- * then the other fields are not valid.
- */
-typedef struct EthernetMacInfo
-{
- unsigned char ucPhyType; /* BP_ENET_xxx */
- unsigned char ucPhyAddress; /* 0 to 31 */
- unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
- unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
- unsigned short numSwitchPorts; /* Number of PHY ports */
- unsigned short usConfigType; /* Configuration type */
- unsigned short usReverseMii; /* Reverse MII */
-} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-
-
-/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
- * then the other fields are not valid.
- */
-typedef struct VoIPDspInfo
-{
- unsigned char ucDspType;
- unsigned char ucDspAddress;
- unsigned short usExtIntrVoip;
- unsigned short usGpioVoipReset;
- unsigned short usGpioVoipIntr;
- unsigned short usGpioLedVoip;
- unsigned short usCsVoip;
-
-} VOIP_DSP_INFO;
-
-
-/**************************************************************************
- * Name : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- * specified board id string and assigns it to a global, static
- * variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- * have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId );
-
-/**************************************************************************
- * Name : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- * strings are returned in. Each id starts at BP_BOARD_ID_LEN
- * boundary.
- * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- * were allocated in pszBoardIds.
- *
- * Returns : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-
-/**************************************************************************
- * Name : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- * buffers.
- * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- * are pointed to by pEnetInfos.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-
-/**************************************************************************
- * Name : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- * SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- * is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize );
-
-/**************************************************************************
- * Name : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- * storage size is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize );
-
-/**************************************************************************
- * Name : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- * between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- * GPIO pin is returned in.
- * [OUT] pusOuter - Address of short word that the RJ11 outer pair
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
- unsigned short *pusOuter );
-
-/**************************************************************************
- * Name : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- * and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- * reset button GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- * UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- * pin is returned in.
- * [OUT] pusCts - Address of short word that the UART CTS GPIO
- * pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-
-/**************************************************************************
- * Name : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- * is in use.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * Button GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the
- * Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * external interrup is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * Led GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- * on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- * LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- * configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- * configuration LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- * into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- * bootloader LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- * number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * external interrupt number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * chip select number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * chip select number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _BOARDPARMS_H */
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __6338_INTR_H
-#define __6338_INTR_H
-
-/*=====================================================================*/
-/* BCM6338 External Interrupt Level Assignments */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0 3
-#define INTERRUPT_ID_EXTERNAL_1 4
-#define INTERRUPT_ID_EXTERNAL_2 5
-#define INTERRUPT_ID_EXTERNAL_3 6
-
-/*=====================================================================*/
-/* BCM6338 Timer Interrupt Level Assignments */
-/*=====================================================================*/
-#define MIPS_TIMER_INT 7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET 8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
-
-#endif /* __BCM6338_H */
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2004 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __BCM6338_MAP_H
-#define __BCM6338_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE 0xfffe0000
-#define TIMR_BASE 0xfffe0200
-#define UART_BASE 0xfffe0300
-#define GPIO_BASE 0xfffe0400
-#define SPI_BASE 0xfffe0c00
-
-typedef struct PerfControl {
- uint32 RevID;
- uint16 testControl;
- uint16 blkEnables;
-#define EMAC_CLK_EN 0x0010
-#define USBS_CLK_EN 0x0010
-#define SAR_CLK_EN 0x0020
-
-#define SPI_CLK_EN 0x0200
-
- uint32 pll_control;
-#define SOFT_RESET 0x00000001
-
- uint32 IrqMask;
- uint32 IrqStatus;
-
- uint32 ExtIrqCfg;
-#define EI_SENSE_SHFT 0
-#define EI_STATUS_SHFT 5
-#define EI_CLEAR_SHFT 10
-#define EI_MASK_SHFT 15
-#define EI_INSENS_SHFT 20
-#define EI_LEVEL_SHFT 25
-
- uint32 unused[4]; /* (18) */
- uint32 BlockSoftReset; /* (28) */
-#define BSR_SPI 0x00000001
-#define BSR_EMAC 0x00000004
-#define BSR_USBH 0x00000008
-#define BSR_USBS 0x00000010
-#define BSR_ADSL 0x00000020
-#define BSR_DMAMEM 0x00000040
-#define BSR_SAR 0x00000080
-#define BSR_ACLC 0x00000100
-#define BSR_ADSL_MIPS_PLL 0x00000400
-#define BSR_ALL_BLOCKS \
- (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
- BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-
-typedef struct Timer {
- uint16 unused0;
- byte TimerMask;
-#define TIMER0EN 0x01
-#define TIMER1EN 0x02
-#define TIMER2EN 0x04
- byte TimerInts;
-#define TIMER0 0x01
-#define TIMER1 0x02
-#define TIMER2 0x04
-#define WATCHDOG 0x08
- uint32 TimerCtl0;
- uint32 TimerCtl1;
- uint32 TimerCtl2;
-#define TIMERENABLE 0x80000000
-#define RSTCNTCLR 0x40000000
- uint32 TimerCnt0;
- uint32 TimerCnt1;
- uint32 TimerCnt2;
- uint32 WatchDogDefCount;
-
- /* Write 0xff00 0x00ff to Start timer
- * Write 0xee00 0x00ee to Stop and re-load default count
- * Read from this register returns current watch dog count
- */
- uint32 WatchDogCtl;
-
- /* Number of 40-MHz ticks for WD Reset pulse to last */
- uint32 WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-typedef struct UartChannel {
- byte unused0;
- byte control;
-#define BRGEN 0x80 /* Control register bit defs */
-#define TXEN 0x40
-#define RXEN 0x20
-#define LOOPBK 0x10
-#define TXPARITYEN 0x08
-#define TXPARITYEVEN 0x04
-#define RXPARITYEN 0x02
-#define RXPARITYEVEN 0x01
-
- byte config;
-#define XMITBREAK 0x40
-#define BITS5SYM 0x00
-#define BITS6SYM 0x10
-#define BITS7SYM 0x20
-#define BITS8SYM 0x30
-#define ONESTOP 0x07
-#define TWOSTOP 0x0f
- /* 4-LSBS represent STOP bits/char
- * in 1/8 bit-time intervals. Zero
- * represents 1/8 stop bit interval.
- * Fifteen represents 2 stop bits.
- */
- byte fifoctl;
-#define RSTTXFIFOS 0x80
-#define RSTRXFIFOS 0x40
- /* 5-bit TimeoutCnt is in low bits of this register.
- * This count represents the number of characters
- * idle times before setting receive Irq when below threshold
- */
- uint32 baudword;
- /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
- */
-
- byte txf_levl; /* Read-only fifo depth */
- byte rxf_levl; /* Read-only fifo depth */
- byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
- * RxThreshold. Irq can be asserted
- * when rx fifo> thresh, txfifo<thresh
- */
- byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
- * if these bits are also enabled to GPIO_o
- */
-#define DTREN 0x01
-#define RTSEN 0x02
-
- byte unused1;
- byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
- * detect irq on rising AND falling
- * edges for corresponding GPIO_i
- * if enabled (edge insensitive)
- */
- byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
- * 0 for negedge sense if
- * not configured for edge
- * insensitive (see above)
- * Lower 4 bits: Mask to enable change
- * detection IRQ for corresponding
- * GPIO_i
- */
- byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
- * have changed (may set IRQ).
- * read automatically clears bit
- * Lower 4 bits are actual status
- */
-
- uint16 intMask; /* Same Bit defs for Mask and status */
- uint16 intStatus;
-#define DELTAIP 0x0001
-#define TXUNDERR 0x0002
-#define TXOVFERR 0x0004
-#define TXFIFOTHOLD 0x0008
-#define TXREADLATCH 0x0010
-#define TXFIFOEMT 0x0020
-#define RXUNDERR 0x0040
-#define RXOVFERR 0x0080
-#define RXTIMEOUT 0x0100
-#define RXFIFOFULL 0x0200
-#define RXFIFOTHOLD 0x0400
-#define RXFIFONE 0x0800
-#define RXFRAMERR 0x1000
-#define RXPARERR 0x2000
-#define RXBRK 0x4000
-
- uint16 unused2;
- uint16 Data; /* Write to TX, Read from RX */
- /* bits 11:8 are BRK,PAR,FRM errors */
-
- uint32 unused3;
- uint32 unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
- uint32 unused0;
- uint32 GPIODir; /* bits 7:0 */
- uint32 unused1;
- uint32 GPIOio; /* bits 7:0 */
- uint32 LEDCtrl;
-#define LED3_STROBE 0x08000000
-#define LED2_STROBE 0x04000000
-#define LED1_STROBE 0x02000000
-#define LED0_STROBE 0x01000000
-#define LED_TEST 0x00010000
-#define LED3_DISABLE_LINK_ACT 0x00008000
-#define LED2_DISABLE_LINK_ACT 0x00004000
-#define LED1_DISABLE_LINK_ACT 0x00002000
-#define LED0_DISABLE_LINK_ACT 0x00001000
-#define LED_INTERVAL_SET_MASK 0x00000f00
-#define LED_INTERVAL_SET_320MS 0x00000500
-#define LED_INTERVAL_SET_160MS 0x00000400
-#define LED_INTERVAL_SET_80MS 0x00000300
-#define LED_INTERVAL_SET_40MS 0x00000200
-#define LED_INTERVAL_SET_20MS 0x00000100
-#define LED3_ON 0x00000080
-#define LED2_ON 0x00000040
-#define LED1_ON 0x00000020
-#define LED0_ON 0x00000010
-#define LED3_ENABLE 0x00000008
-#define LED2_ENABLE 0x00000004
-#define LED1_ENABLE 0x00000002
-#define LED0_ENABLE 0x00000001
- uint32 SpiSlaveCfg;
-#define SPI_SLAVE_RESET 0x00010000
-#define SPI_RESTRICT 0x00000400
-#define SPI_DELAY_DISABLE 0x00000200
-#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
-#define SPI_SER_ADDR_CFG_MASK 0x0000000c
-#define SPI_MODE 0x00000001
- uint32 vRegConfig;
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_MAX_BITS_MASK 0x0f
-#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-/*
-** Spi Controller
-*/
-
-typedef struct SpiControl {
- uint16 spiCmd; /* (0x0): SPI command */
-#define SPI_CMD_START_IMMEDIATE 3
-
-#define SPI_CMD_COMMAND_SHIFT 0
-#define SPI_CMD_DEVICE_ID_SHIFT 4
-#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
-
- byte spiIntStatus; /* (0x2): SPI interrupt status */
- byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
-
- byte spiIntMask; /* (0x4): SPI interrupt mask */
-#define SPI_INTR_CMD_DONE 0x01
-#define SPI_INTR_CLEAR_ALL 0x1f
-
- byte spiStatus; /* (0x5): SPI status */
-
- byte spiClkCfg; /* (0x6): SPI clock configuration */
-
- byte spiFillByte; /* (0x7): SPI fill byte */
-
- byte unused0;
- byte spiMsgTail; /* (0x9): msgtail */
- byte unused1;
- byte spiRxTail; /* (0xB): rxtail */
-
- uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
-
- byte spiMsgCtl; /* (0x40) control byte */
-#define HALF_DUPLEX_W 1
-#define HALF_DUPLEX_R 2
-#define SPI_MSG_TYPE_SHIFT 6
-#define SPI_BYTE_CNT_SHIFT 0
- byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
- byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
- byte unused3[64]; /* (0xc0 - 0xff) reserved */
-} SpiControl;
-
-#define SPI ((volatile SpiControl * const) SPI_BASE)
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
- uint32 base; /* base address in upper 24 bits */
-#define EBI_SIZE_8K 0
-#define EBI_SIZE_16K 1
-#define EBI_SIZE_32K 2
-#define EBI_SIZE_64K 3
-#define EBI_SIZE_128K 4
-#define EBI_SIZE_256K 5
-#define EBI_SIZE_512K 6
-#define EBI_SIZE_1M 7
-#define EBI_SIZE_2M 8
-#define EBI_SIZE_4M 9
-#define EBI_SIZE_8M 10
-#define EBI_SIZE_16M 11
-#define EBI_SIZE_32M 12
-#define EBI_SIZE_64M 13
-#define EBI_SIZE_128M 14
-#define EBI_SIZE_256M 15
- uint32 config;
-#define EBI_ENABLE 0x00000001 /* .. enable this range */
-#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
-#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
-#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN 0x00000020 /* enable posted writes */
-#define EBI_POLARITY 0x00000040 /* .. set to invert something,
- ** don't know what yet */
-#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
-#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
-#define EBI_FIFO 0x00000200 /* .. use fifo */
-#define EBI_RE 0x00000400 /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
- EbiChipSelect cs[1]; /* size chip select configuration */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-
-#endif
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __6345_INTR_H
-#define __6345_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6345 External Interrupt Level Assignments */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0 3
-#define INTERRUPT_ID_EXTERNAL_1 4
-#define INTERRUPT_ID_EXTERNAL_2 5
-#define INTERRUPT_ID_EXTERNAL_3 6
-
-/*=====================================================================*/
-/* BCM6345 Timer Interrupt Level Assignments */
-/*=====================================================================*/
-#define MIPS_TIMER_INT 7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET 8
-#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs */
-/*=====================================================================*/
-
-/* Internal peripheral interrupt IDs */
-#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
-#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
-
-/* DMA channel interrupt IDs */
-#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
-#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
-#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
-#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
-#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
-#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
-#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
-#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
-#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
-#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
-
-
-#endif /* __BCM6345_H */
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __BCM6345_MAP_H
-#define __BCM6345_MAP_H
-
-
-#include "bcmtypes.h"
-#include "6345_intr.h"
-
-typedef struct IntControl {
- uint32 RevID;
- uint16 testControl;
- uint16 blkEnables;
-#define USB_CLK_EN 0x0100
-#define EMAC_CLK_EN 0x0080
-#define UART_CLK_EN 0x0008
-#define CPU_CLK_EN 0x0001
-
- uint32 pll_control;
-#define SOFT_RESET 0x00000001
-
- uint32 IrqMask;
- uint32 IrqStatus;
-
- uint32 ExtIrqCfg;
-#define EI_SENSE_SHFT 0
-#define EI_STATUS_SHFT 4
-#define EI_CLEAR_SHFT 8
-#define EI_MASK_SHFT 12
-#define EI_INSENS_SHFT 16
-#define EI_LEVEL_SHFT 20
-} IntControl;
-
-#define INTC_BASE 0xfffe0000
-#define PERF ((volatile IntControl * const) INTC_BASE)
-
-#define TIMR_BASE 0xfffe0200
-typedef struct Timer {
- uint16 unused0;
- byte TimerMask;
-#define TIMER0EN 0x01
-#define TIMER1EN 0x02
-#define TIMER2EN 0x04
- byte TimerInts;
-#define TIMER0 0x01
-#define TIMER1 0x02
-#define TIMER2 0x04
-#define WATCHDOG 0x08
- uint32 TimerCtl0;
- uint32 TimerCtl1;
- uint32 TimerCtl2;
-#define TIMERENABLE 0x80000000
-#define RSTCNTCLR 0x40000000
- uint32 TimerCnt0;
- uint32 TimerCnt1;
- uint32 TimerCnt2;
- uint32 WatchDogDefCount;
-
- /* Write 0xff00 0x00ff to Start timer
- * Write 0xee00 0x00ee to Stop and re-load default count
- * Read from this register returns current watch dog count
- */
- uint32 WatchDogCtl;
-
- /* Number of 40-MHz ticks for WD Reset pulse to last */
- uint32 WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
- byte unused0;
- byte control;
-#define BRGEN 0x80 /* Control register bit defs */
-#define TXEN 0x40
-#define RXEN 0x20
-#define TXPARITYEN 0x08
-#define TXPARITYEVEN 0x04
-#define RXPARITYEN 0x02
-#define RXPARITYEVEN 0x01
- byte config;
-#define BITS5SYM 0x00
-#define BITS6SYM 0x10
-#define BITS7SYM 0x20
-#define BITS8SYM 0x30
-#define XMITBREAK 0x40
-#define ONESTOP 0x07
-#define TWOSTOP 0x0f
-
- byte fifoctl;
-#define RSTTXFIFOS 0x80
-#define RSTRXFIFOS 0x40
- uint32 baudword;
-
- byte txf_levl;
- byte rxf_levl;
- byte fifocfg;
- byte prog_out;
-
- byte unused1;
- byte DeltaIPEdgeNoSense;
- byte DeltaIPConfig_Mask;
- byte DeltaIP_SyncIP;
- uint16 intMask;
- uint16 intStatus;
-#define TXUNDERR 0x0002
-#define TXOVFERR 0x0004
-#define TXFIFOEMT 0x0020
-#define RXOVFERR 0x0080
-#define RXFIFONE 0x0800
-#define RXFRAMERR 0x1000
-#define RXPARERR 0x2000
-#define RXBRK 0x4000
-
- uint16 unused2;
- uint16 Data;
- uint32 unused3;
- uint32 unused4;
-} Uart;
-
-#define UART_BASE 0xfffe0300
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
- uint16 unused0;
- byte unused1;
- byte TBusSel;
-
- uint16 unused2;
- uint16 GPIODir;
- byte unused3;
- byte Leds;
- uint16 GPIOio;
-
- uint32 UartCtl;
-} GpioControl;
-
-#define GPIO_BASE 0xfffe0400
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-#define GPIO_NUM_MAX_BITS_MASK 0x0f
-#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-
-#endif
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __6348_INTR_H
-#define __6348_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6348 External Interrupt Level Assignments */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0 3
-#define INTERRUPT_ID_EXTERNAL_1 4
-#define INTERRUPT_ID_EXTERNAL_2 5
-#define INTERRUPT_ID_EXTERNAL_3 6
-
-/*=====================================================================*/
-/* BCM6348 Timer Interrupt Level Assignments */
-/*=====================================================================*/
-#define MIPS_TIMER_INT 7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET 8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
-#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
-#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
-#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
-#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
-#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
-#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
-#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
-#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
-
-
-#endif /* __BCM6348_H */
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __BCM6348_MAP_H
-#define __BCM6348_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE 0xfffe0000
-#define TIMR_BASE 0xfffe0200
-#define UART_BASE 0xfffe0300
-#define GPIO_BASE 0xfffe0400
-#define MPI_BASE 0xfffe2000 /* MPI control registers */
-#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
-#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
-
-typedef struct PerfControl {
- uint32 RevID;
- uint16 testControl;
- uint16 blkEnables;
-#define EMAC_CLK_EN 0x0010
-#define SAR_CLK_EN 0x0020
-#define USBS_CLK_EN 0x0040
-#define USBH_CLK_EN 0x0100
-
- uint32 pll_control;
-#define SOFT_RESET 0x00000001
-
- uint32 IrqMask;
- uint32 IrqStatus;
-
- uint32 ExtIrqCfg;
-#define EI_SENSE_SHFT 0
-#define EI_STATUS_SHFT 5
-#define EI_CLEAR_SHFT 10
-#define EI_MASK_SHFT 15
-#define EI_INSENS_SHFT 20
-#define EI_LEVEL_SHFT 25
-
- uint32 unused[4]; /* (18) */
- uint32 BlockSoftReset; /* (28) */
-#define BSR_SPI 0x00000001
-#define BSR_EMAC 0x00000004
-#define BSR_USBH 0x00000008
-#define BSR_USBS 0x00000010
-#define BSR_ADSL 0x00000020
-#define BSR_DMAMEM 0x00000040
-#define BSR_SAR 0x00000080
-#define BSR_ACLC 0x00000100
-#define BSR_ADSL_MIPS_PLL 0x00000400
-#define BSR_ALL_BLOCKS \
- (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
- BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
- uint32 unused2[2]; /* (2c) */
- uint32 PllStrap; /* (34) */
-#define PLL_N1_SHFT 20
-#define PLL_N1_MASK (7<<PLL_N1_SHFT)
-#define PLL_N2_SHFT 15
-#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
-#define PLL_M1_REF_SHFT 12
-#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
-#define PLL_M2_REF_SHFT 9
-#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
-#define PLL_M1_CPU_SHFT 6
-#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
-#define PLL_M1_BUS_SHFT 3
-#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
-#define PLL_M2_BUS_SHFT 0
-#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-typedef struct Timer {
- uint16 unused0;
- byte TimerMask;
-#define TIMER0EN 0x01
-#define TIMER1EN 0x02
-#define TIMER2EN 0x04
- byte TimerInts;
-#define TIMER0 0x01
-#define TIMER1 0x02
-#define TIMER2 0x04
-#define WATCHDOG 0x08
- uint32 TimerCtl0;
- uint32 TimerCtl1;
- uint32 TimerCtl2;
-#define TIMERENABLE 0x80000000
-#define RSTCNTCLR 0x40000000
- uint32 TimerCnt0;
- uint32 TimerCnt1;
- uint32 TimerCnt2;
- uint32 WatchDogDefCount;
-
- /* Write 0xff00 0x00ff to Start timer
- * Write 0xee00 0x00ee to Stop and re-load default count
- * Read from this register returns current watch dog count
- */
- uint32 WatchDogCtl;
-
- /* Number of 40-MHz ticks for WD Reset pulse to last */
- uint32 WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
- byte unused0;
- byte control;
-#define BRGEN 0x80 /* Control register bit defs */
-#define TXEN 0x40
-#define RXEN 0x20
-#define LOOPBK 0x10
-#define TXPARITYEN 0x08
-#define TXPARITYEVEN 0x04
-#define RXPARITYEN 0x02
-#define RXPARITYEVEN 0x01
-
- byte config;
-#define XMITBREAK 0x40
-#define BITS5SYM 0x00
-#define BITS6SYM 0x10
-#define BITS7SYM 0x20
-#define BITS8SYM 0x30
-#define ONESTOP 0x07
-#define TWOSTOP 0x0f
- /* 4-LSBS represent STOP bits/char
- * in 1/8 bit-time intervals. Zero
- * represents 1/8 stop bit interval.
- * Fifteen represents 2 stop bits.
- */
- byte fifoctl;
-#define RSTTXFIFOS 0x80
-#define RSTRXFIFOS 0x40
- /* 5-bit TimeoutCnt is in low bits of this register.
- * This count represents the number of characters
- * idle times before setting receive Irq when below threshold
- */
- uint32 baudword;
- /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
- */
-
- byte txf_levl; /* Read-only fifo depth */
- byte rxf_levl; /* Read-only fifo depth */
- byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
- * RxThreshold. Irq can be asserted
- * when rx fifo> thresh, txfifo<thresh
- */
- byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
- * if these bits are also enabled to GPIO_o
- */
-#define DTREN 0x01
-#define RTSEN 0x02
-
- byte unused1;
- byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
- * detect irq on rising AND falling
- * edges for corresponding GPIO_i
- * if enabled (edge insensitive)
- */
- byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
- * 0 for negedge sense if
- * not configured for edge
- * insensitive (see above)
- * Lower 4 bits: Mask to enable change
- * detection IRQ for corresponding
- * GPIO_i
- */
- byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
- * have changed (may set IRQ).
- * read automatically clears bit
- * Lower 4 bits are actual status
- */
-
- uint16 intMask; /* Same Bit defs for Mask and status */
- uint16 intStatus;
-#define DELTAIP 0x0001
-#define TXUNDERR 0x0002
-#define TXOVFERR 0x0004
-#define TXFIFOTHOLD 0x0008
-#define TXREADLATCH 0x0010
-#define TXFIFOEMT 0x0020
-#define RXUNDERR 0x0040
-#define RXOVFERR 0x0080
-#define RXTIMEOUT 0x0100
-#define RXFIFOFULL 0x0200
-#define RXFIFOTHOLD 0x0400
-#define RXFIFONE 0x0800
-#define RXFRAMERR 0x1000
-#define RXPARERR 0x2000
-#define RXBRK 0x4000
-
- uint16 unused2;
- uint16 Data; /* Write to TX, Read from RX */
- /* bits 11:8 are BRK,PAR,FRM errors */
-
- uint32 unused3;
- uint32 unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
- uint32 GPIODir_high; /* bits 36:32 */
- uint32 GPIODir; /* bits 31:00 */
- uint32 GPIOio_high; /* bits 36:32 */
- uint32 GPIOio; /* bits 31:00 */
- uint32 LEDCtrl;
-#define LED3_STROBE 0x08000000
-#define LED2_STROBE 0x04000000
-#define LED1_STROBE 0x02000000
-#define LED0_STROBE 0x01000000
-#define LED_TEST 0x00010000
-#define LED3_DISABLE_LINK_ACT 0x00008000
-#define LED2_DISABLE_LINK_ACT 0x00004000
-#define LED1_DISABLE_LINK_ACT 0x00002000
-#define LED0_DISABLE_LINK_ACT 0x00001000
-#define LED_INTERVAL_SET_MASK 0x00000f00
-#define LED_INTERVAL_SET_320MS 0x00000500
-#define LED_INTERVAL_SET_160MS 0x00000400
-#define LED_INTERVAL_SET_80MS 0x00000300
-#define LED_INTERVAL_SET_40MS 0x00000200
-#define LED_INTERVAL_SET_20MS 0x00000100
-#define LED3_ON 0x00000080
-#define LED2_ON 0x00000040
-#define LED1_ON 0x00000020
-#define LED0_ON 0x00000010
-#define LED3_ENABLE 0x00000008
-#define LED2_ENABLE 0x00000004
-#define LED1_ENABLE 0x00000002
-#define LED0_ENABLE 0x00000001
- uint32 SpiSlaveCfg;
-#define SPI_SLAVE_RESET 0x00010000
-#define SPI_RESTRICT 0x00000400
-#define SPI_DELAY_DISABLE 0x00000200
-#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
-#define SPI_SER_ADDR_CFG_MASK 0x0000000c
-#define SPI_MODE 0x00000001
- uint32 GPIOMode;
-#define GROUP4_DIAG 0x00090000
-#define GROUP4_UTOPIA 0x00080000
-#define GROUP4_LEGACY_LED 0x00030000
-#define GROUP4_MII_SNOOP 0x00020000
-#define GROUP4_EXT_EPHY 0x00010000
-#define GROUP3_DIAG 0x00009000
-#define GROUP3_UTOPIA 0x00008000
-#define GROUP3_EXT_MII 0x00007000
-#define GROUP2_DIAG 0x00000900
-#define GROUP2_PCI 0x00000500
-#define GROUP1_DIAG 0x00000090
-#define GROUP1_UTOPIA 0x00000080
-#define GROUP1_SPI_UART 0x00000060
-#define GROUP1_SPI_MASTER 0x00000060
-#define GROUP1_MII_PCCARD 0x00000040
-#define GROUP1_MII_SNOOP 0x00000020
-#define GROUP1_EXT_EPHY 0x00000010
-#define GROUP0_DIAG 0x00000009
-#define GROUP0_EXT_MII 0x00000007
-
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
-#define GPIO_NUM_MAX_BITS_MASK 0x1f
-#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
-
-/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
-#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
-#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
-
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
- uint32 base; /* base address in upper 24 bits */
-#define EBI_SIZE_8K 0
-#define EBI_SIZE_16K 1
-#define EBI_SIZE_32K 2
-#define EBI_SIZE_64K 3
-#define EBI_SIZE_128K 4
-#define EBI_SIZE_256K 5
-#define EBI_SIZE_512K 6
-#define EBI_SIZE_1M 7
-#define EBI_SIZE_2M 8
-#define EBI_SIZE_4M 9
-#define EBI_SIZE_8M 10
-#define EBI_SIZE_16M 11
-#define EBI_SIZE_32M 12
-#define EBI_SIZE_64M 13
-#define EBI_SIZE_128M 14
-#define EBI_SIZE_256M 15
- uint32 config;
-#define EBI_ENABLE 0x00000001 /* .. enable this range */
-#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
-#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
-#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN 0x00000020 /* enable posted writes */
-#define EBI_POLARITY 0x00000040 /* .. set to invert something,
- ** don't know what yet */
-#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
-#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
-#define EBI_FIFO 0x00000200 /* .. use fifo */
-#define EBI_RE 0x00000400 /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
- EbiChipSelect cs[7]; /* size chip select configuration */
-#define EBI_CS0_BASE 0
-#define EBI_CS1_BASE 1
-#define EBI_CS2_BASE 2
-#define EBI_CS3_BASE 3
-#define PCMCIA_COMMON_BASE 4
-#define PCMCIA_ATTRIBUTE_BASE 5
-#define PCMCIA_IO_BASE 6
- uint32 unused0[2]; /* reserved */
- uint32 ebi_control; /* ebi control */
- uint32 unused1[4]; /* reserved */
-#define EBI_ACCESS_TIMEOUT 0x000007FF
- uint32 pcmcia_cntl1; /* pcmcia control 1 */
-#define PCCARD_CARD_RESET 0x00040000
-#define CARDBUS_ENABLE 0x00008000
-#define PCMCIA_ENABLE 0x00004000
-#define PCMCIA_GPIO_ENABLE 0x00002000
-#define CARDBUS_IDSEL 0x00001F00
-#define VS2_OEN 0x00000080
-#define VS1_OEN 0x00000040
-#define VS2_OUT 0x00000020
-#define VS1_OUT 0x00000010
-#define VS2_IN 0x00000008
-#define VS1_IN 0x00000004
-#define CD2_IN 0x00000002
-#define CD1_IN 0x00000001
-#define VS_MASK 0x0000000C
-#define CD_MASK 0x00000003
- uint32 unused2; /* reserved */
- uint32 pcmcia_cntl2; /* pcmcia control 2 */
-#define PCMCIA_BYTESWAP_DIS 0x00000002
-#define PCMCIA_HALFWORD_EN 0x00000001
-#define RW_ACTIVE_CNT_BIT 2
-#define INACTIVE_CNT_BIT 8
-#define CE_SETUP_CNT_BIT 16
-#define CE_HOLD_CNT_BIT 24
- uint32 unused3[40]; /* reserved */
-
- uint32 sp0range; /* PCI to internal system bus address space */
- uint32 sp0remap;
- uint32 sp0cfg;
- uint32 sp1range;
- uint32 sp1remap;
- uint32 sp1cfg;
-
- uint32 EndianCfg;
-
- uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
-#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
-#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
-#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
-#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
-#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
-#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
-
- uint32 l2pmrange1; /* internal system bus to PCI memory space */
-#define PCI_SIZE_64K 0xFFFF0000
-#define PCI_SIZE_128K 0xFFFE0000
-#define PCI_SIZE_256K 0xFFFC0000
-#define PCI_SIZE_512K 0xFFF80000
-#define PCI_SIZE_1M 0xFFF00000
-#define PCI_SIZE_2M 0xFFE00000
-#define PCI_SIZE_4M 0xFFC00000
-#define PCI_SIZE_8M 0xFF800000
-#define PCI_SIZE_16M 0xFF000000
-#define PCI_SIZE_32M 0xFE000000
- uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
- uint32 l2pmremap1;
-#define CARDBUS_MEM 0x00000004
-#define MEM_WINDOW_EN 0x00000001
- uint32 l2pmrange2;
- uint32 l2pmbase2;
- uint32 l2pmremap2;
- uint32 l2piorange; /* internal system bus to PCI I/O space */
- uint32 l2piobase;
- uint32 l2pioremap;
-
- uint32 pcimodesel;
-#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
-#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
-#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
-
- uint32 pciintstat; /* PCI interrupt mask/status */
-#define MAILBOX1_SENT 0x08
-#define MAILBOX0_SENT 0x04
-#define MAILBOX1_MSG_RCV 0x02
-#define MAILBOX0_MSG_RCV 0x01
- uint32 locbuscntrl; /* internal system bus control */
-#define DIR_U2P_NOSWAP 0x00000002
-#define EN_PCI_GPIO 0x00000001
- uint32 locintstat; /* internal system bus interrupt mask/status */
-#define CSERR 0x0200
-#define SERR 0x0100
-#define EXT_PCI_INT 0x0080
-#define DIR_FAILED 0x0040
-#define DIR_COMPLETE 0x0020
-#define PCI_CFG 0x0010
- uint32 unused5[7];
-
- uint32 mailbox0;
- uint32 mailbox1;
-
- uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
-#define PCI_CFG_REG_WRITE_EN 0x00000080
-#define PCI_CFG_ADDR 0x0000003C
- uint32 pcicfgdata; /* internal system bus PCI configuration data */
-
- uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
-#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
-#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
-#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
-#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
- uint32 locch2intStat;
-#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
-#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
-#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
- uint32 locch2intMask;
- uint32 unused6;
- uint32 locch2descaddr;
- uint32 locch2status1;
-#define LOCAL_DESC_STATE 0xE0000000
-#define PCI_DESC_STATE 0x1C000000
-#define BYTE_DONE 0x03FFC000
-#define RING_ADDR 0x00003FFF
- uint32 locch2status2;
-#define BUFPTR_OFFSET 0x1FFF0000
-#define PCI_MASTER_STATE 0x000000C0
-#define LOC_MASTER_STATE 0x00000038
-#define CONTROL_STATE 0x00000007
- uint32 unused7;
-
- uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
-#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
-#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
- uint32 locch1intstat;
- uint32 locch1intmask;
- uint32 unused8;
- uint32 locch1descaddr;
- uint32 locch1status1;
- uint32 locch1status2;
- uint32 unused9;
-
- uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
- uint32 pcich1intstat;
- uint32 pcich1intmask;
- uint32 pcich1descaddr;
- uint32 pcich1status1;
- uint32 pcich1status2;
-
- uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
- uint32 pcich2intstat;
- uint32 pcich2intmask;
- uint32 pcich2descaddr;
- uint32 pcich2status1;
- uint32 pcich2status2;
-
- uint32 perm_id; /* permanent device and vendor id */
- uint32 perm_rev; /* permanent revision id */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-/* PCI configuration address space start offset 0x40 */
-#define BRCM_PCI_CONFIG_TIMER 0x40
-#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
-#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
-
-/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
-#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
-#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
-
-#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
-
-#endif
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-//**************************************************************************************
-// File Name : bcmTag.h
-//
-// Description: add tag with validation system to the firmware image file to be uploaded
-// via http
-//
-// Created : 02/28/2002 seanl
-//**************************************************************************************
-
-#ifndef _BCMTAG_H_
-#define _BCMTAG_H_
-
-
-#define BCM_SIG_1 "Broadcom Corporation"
-#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
-
-#define BCM_TAG_VER "6"
-#define BCM_TAG_VER_LAST "26"
-
-// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
-#define TAG_LEN 256
-#define TAG_VER_LEN 4
-#define SIG_LEN 20
-#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
-#define CHIP_ID_LEN 6
-#define IMAGE_LEN 10
-#define ADDRESS_LEN 12
-#define FLAG_LEN 2
-#define TOKEN_LEN 20
-#define BOARD_ID_LEN 16
-#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
- (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
-
-
-// TAG for downloadable image (kernel plus file system)
-typedef struct _FILE_TAG
-{
- unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
- unsigned char signiture_1[SIG_LEN]; // text line for company info
- unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
- unsigned char chipId[CHIP_ID_LEN]; // chip id
- unsigned char boardId[BOARD_ID_LEN]; // board id
- unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
- unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
- unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
- unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
- unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
- unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
- unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
- unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
- unsigned char dualImage[FLAG_LEN]; // if 1, dual image
- unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
- unsigned char reserved[RESERVED_LEN]; // reserved for later use
- unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
- // now will be 4 unsigned char crc
- unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
-} FILE_TAG, *PFILE_TAG;
-
-#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-#define CRC_LEN 4
-
-// only included if for bcmTag.exe program
-#ifdef BCMTAG_EXE_USE
-
-static unsigned long Crc32_table[256] = {
- 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
- 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
- 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
- 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
- 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
- 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
- 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
- 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
- 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
- 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
- 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
- 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
- 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
- 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
- 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
- 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
- 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
- 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
- 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
- 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
- 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
- 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
- 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
- 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
- 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
- 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
- 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
- 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
- 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
- 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
- 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
- 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
- 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
- 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
- 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
- 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
- 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
- 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
- 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
- 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
- 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
- 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
- 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
- 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
- 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
- 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
- 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
- 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
- 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
- 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
- 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
- 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
- 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
- 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
- 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
- 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
- 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
- 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
- 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
- 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
- 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
- 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
- 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
- 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-};
-#endif // BCMTAG_USE
-
-
-#endif // _BCMTAG_H_
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __BCM_INTR_H
-#define __BCM_INTR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(CONFIG_BCM96338)
-#include <6338_intr.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_intr.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_intr.h>
-#endif
-
-/* defines */
-struct pt_regs;
-typedef int (*FN_HANDLER) (int, void *);
-
-/* prototypes */
-extern void enable_brcm_irq(unsigned int irq);
-extern void disable_brcm_irq(unsigned int irq);
-extern int request_external_irq(unsigned int irq,
- FN_HANDLER handler, unsigned long irqflags,
- const char * devname, void *dev_id);
-extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
- unsigned int interruptId);
-extern void dump_intr_regs(void);
-
-/* compatibility definitions */
-#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
-#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2004 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-#ifndef __BCM_MAP_PART_H
-#define __BCM_MAP_PART_H
-
-#if defined(CONFIG_BCM96338)
-#include <6338_map_part.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_map_part.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_map_part.h>
-#endif
-
-#endif
-
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2004 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-//
-// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
-//
-#ifndef BCMPCI_H
-#define BCMPCI_H
-
-/* Memory window in internal system bus address space */
-#define BCM_PCI_MEM_BASE 0x08000000
-/* IO window in internal system bus address space */
-#define BCM_PCI_IO_BASE 0x0C000000
-
-#define BCM_PCI_ADDR_MASK 0x1fffffff
-
-/* Memory window size (range) */
-#define BCM_PCI_MEM_SIZE_16MB 0x01000000
-/* IO window size (range) */
-#define BCM_PCI_IO_SIZE_64KB 0x00010000
-
-/* PCI Configuration and I/O space acesss */
-#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
-
-/* fake USB PCI slot */
-#define USB_HOST_SLOT 9
-#define USB_BAR0_MEM_SIZE 0x0800
-
-#define BCM_HOST_MEM_SPACE1 0x10000000
-#define BCM_HOST_MEM_SPACE2 0x00000000
-
-/*
- * EBI bus clock is 33MHz and share with PCI bus
- * each clock cycle is 30ns.
- */
-/* attribute memory access wait cnt for 4306 */
-#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
-#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
-#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
-
-/* common memory access wait cnt for 4306 */
-#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
-#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
-#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
-
-#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
-#define PCCARD_VCC_33V 0x00010000
-#define PCCARD_VCC_50V 0x00020000
-
-typedef enum {
- MPI_CARDTYPE_NONE, // No Card in slot
- MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
- MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
-} CardType;
-
-#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
-
-#define pcmciaAttrOffset 0x00200000
-#define pcmciaMemOffset 0x00000000
-// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
-#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
-// Base Address is that mapped into the MPI ChipSelect registers.
-// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
-#define pcmciaBase 0xbf000000
-#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
-#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
-#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
-
-#endif
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-
-//
-// bcmtypes.h - misc useful typedefs
-//
-#ifndef BCMTYPES_H
-#define BCMTYPES_H
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-
-#ifndef _TYPEDEFS_H_
-typedef unsigned char uint8;
-typedef unsigned short uint16;
-typedef unsigned long uint32;
-typedef signed char int8;
-typedef signed short int16;
-typedef signed long int32;
-#endif
-
-typedef unsigned char byte;
-// typedef unsigned long sem_t;
-
-typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
-typedef signed long LONG,*PLONG;
-
-typedef unsigned int *PUINT;
-typedef signed int INT;
-
-typedef unsigned short *PUSHORT;
-typedef signed short SHORT,*PSHORT;
-typedef unsigned short WORD,*PWORD;
-
-typedef unsigned char *PUCHAR;
-typedef signed char *PCHAR;
-
-typedef void *PVOID;
-
-typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
-
-typedef unsigned char BYTE,*PBYTE;
-
-//#ifndef __GNUC__
-//The following has been defined in Vxworks internally: vxTypesOld.h
-//redefine under vxworks will cause error
-typedef signed int *PINT;
-
-typedef signed char INT8;
-typedef signed short INT16;
-typedef signed long INT32;
-
-typedef unsigned char UINT8;
-typedef unsigned short UINT16;
-typedef unsigned long UINT32;
-
-typedef unsigned char UCHAR;
-typedef unsigned short USHORT;
-typedef unsigned int UINT;
-typedef unsigned long ULONG;
-
-typedef void VOID;
-typedef unsigned char BOOL;
-
-//#endif /* __GNUC__ */
-
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-#ifndef TYPEDEFS_H
-
-// Maximum and minimum values for a signed 16 bit integer.
-#define MAX_INT16 32767
-#define MIN_INT16 -32768
-
-// Useful for true/false return values. This uses the
-// Taligent notation (k for constant).
-typedef enum
-{
- kFalse = 0,
- kTrue = 1
-} Bool;
-
-#endif
-
-/* macros to protect against unaligned accesses */
-
-#if 0
-/* first arg is an address, second is a value */
-#define PUT16( a, d ) { \
- *((byte *)a) = (byte)((d)>>8); \
- *(((byte *)a)+1) = (byte)(d); \
-}
-
-#define PUT32( a, d ) { \
- *((byte *)a) = (byte)((d)>>24); \
- *(((byte *)a)+1) = (byte)((d)>>16); \
- *(((byte *)a)+2) = (byte)((d)>>8); \
- *(((byte *)a)+3) = (byte)(d); \
-}
-
-/* first arg is an address, returns a value */
-#define GET16( a ) ( \
- (*((byte *)a) << 8) | \
- (*(((byte *)a)+1)) \
-)
-
-#define GET32( a ) ( \
- (*((byte *)a) << 24) | \
- (*(((byte *)a)+1) << 16) | \
- (*(((byte *)a)+2) << 8) | \
- (*(((byte *)a)+3)) \
-)
-#endif
-
-#ifndef YES
-#define YES 1
-#endif
-
-#ifndef NO
-#define NO 0
-#endif
-
-#ifndef IN
-#define IN
-#endif
-
-#ifndef OUT
-#define OUT
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
-#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
-#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
-
-#endif
+++ /dev/null
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-/***********************************************************************/
-/* */
-/* MODULE: board.h */
-/* DATE: 97/02/18 */
-/* PURPOSE: Board specific information. This module should include */
-/* all base device addresses and board specific macros. */
-/* */
-/***********************************************************************/
-#ifndef _BOARD_H
-#define _BOARD_H
-
-/*****************************************************************************/
-/* Misc board definitions */
-/*****************************************************************************/
-
-#define DYING_GASP_API
-
-/*****************************************************************************/
-/* Physical Memory Map */
-/*****************************************************************************/
-
-#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
-#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
-
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs */
-/* have to use converted addresses defined below: */
-/*****************************************************************************/
-#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
-#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
-#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
-
-/*****************************************************************************/
-/* Select the PLL value to get the desired CPU clock frequency. */
-/* */
-/* */
-/*****************************************************************************/
-#define FPERIPH 50000000
-
-#define ONEK 1024
-#define BLK64K (64*ONEK)
-#define FLASH45_BLKS_BOOT_ROM 1
-#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
-#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
-
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs */
-/* have to use converted addresses defined below: */
-/*****************************************************************************/
-#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
-#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
-#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
-
-/*****************************************************************************/
-/* Select the PLL value to get the desired CPU clock frequency. */
-/* */
-/* */
-/*****************************************************************************/
-#define FPERIPH 50000000
-
-#define SDRAM_TYPE_ADDRESS_OFFSET 16
-#define NVRAM_DATA_OFFSET 0x0580
-#define NVRAM_DATA_ID 0x0f1e2d3c
-#define BOARD_SDRAM_TYPE *(unsigned long *) \
- (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
-
-#define ONEK 1024
-#define BLK64K (64*ONEK)
-
-// nvram and psi flash definitions for 45
-#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
-#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
-
-/*****************************************************************************/
-/* NVRAM Offset and definition */
-/*****************************************************************************/
-
-#define NVRAM_VERSION_NUMBER 2
-#define NVRAM_VERSION_NUMBER_ADDRESS 0
-
-#define NVRAM_BOOTLINE_LEN 256
-#define NVRAM_BOARD_ID_STRING_LEN 16
-#define NVRAM_MAC_ADDRESS_LEN 6
-#define NVRAM_MAC_COUNT_MAX 32
-
-/*****************************************************************************/
-/* Misc Offsets */
-/*****************************************************************************/
-
-#define CFE_VERSION_OFFSET 0x0570
-#define CFE_VERSION_MARK_SIZE 5
-#define CFE_VERSION_SIZE 5
-
-typedef struct
-{
- unsigned long ulVersion;
- char szBootline[NVRAM_BOOTLINE_LEN];
- char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
- unsigned long ulReserved1[2];
- unsigned long ulNumMacAddrs;
- unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
- char chReserved[2];
- unsigned long ulCheckSum;
-} NVRAM_DATA, *PNVRAM_DATA;
-
-
-/*****************************************************************************/
-/* board ioctl calls for flash, led and some other utilities */
-/*****************************************************************************/
-
-
-/* Defines. for board driver */
-#define BOARD_IOCTL_MAGIC 'B'
-#define BOARD_DRV_MAJOR 206
-
-#define MAC_ADDRESS_ANY (unsigned long) -1
-
-#define BOARD_IOCTL_FLASH_INIT \
- _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_WRITE \
- _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_READ \
- _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NR_PAGES \
- _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_DUMP_ADDR \
- _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MEMORY \
- _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_MIPS_SOFT_RESET \
- _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_LED_CTRL \
- _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ID \
- _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_MAC_ADDRESS \
- _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
- _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_PSI_SIZE \
- _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_SDRAM_SIZE \
- _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MONITOR_FD \
- _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
- _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BOOTLINE \
- _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_BOOTLINE \
- _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
- _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CHIP_ID \
- _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NUM_ENET \
- _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CFE_VER \
- _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ENET_CFG \
- _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
- _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_TRIGGER_EVENT \
- _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_TRIGGER_EVENT \
- _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
- _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_SES_LED \
- _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-#define RESET_BUTTON_UP 1
-#define RESET_BUTTON_PRESSDOWN 0
-#define BOARD_IOCTL_GET_RESETHOLD \
- _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
-//>>JUNHON, 2004/09/15
-
-// for the action in BOARD_IOCTL_PARMS for flash operation
-typedef enum
-{
- PERSISTENT,
- NVRAM,
- BCM_IMAGE_CFE,
- BCM_IMAGE_FS,
- BCM_IMAGE_KERNEL,
- BCM_IMAGE_WHOLE,
- SCRATCH_PAD,
- FLASH_SIZE,
-} BOARD_IOCTL_ACTION;
-
-
-typedef struct boardIoctParms
-{
- char *string;
- char *buf;
- int strLen;
- int offset;
- BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
- int result;
-} BOARD_IOCTL_PARMS;
-
-
-// LED defines
-typedef enum
-{
- kLedAdsl,
- kLedWireless,
- kLedUsb,
- kLedHpna,
- kLedWanData,
- kLedPPP,
- kLedVoip,
- kLedSes,
- kLedLan,
- kLedSelfTest,
- kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
-} BOARD_LED_NAME;
-
-typedef enum
-{
- kLedStateOff, /* turn led off */
- kLedStateOn, /* turn led on */
- kLedStateFail, /* turn led on red */
- kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
- kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
- kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
-} BOARD_LED_STATE;
-
-
-// virtual and physical map pair defined in board.c
-typedef struct ledmappair
-{
- BOARD_LED_NAME ledName; // virtual led name
- BOARD_LED_STATE ledInitState; // initial led state when the board boots.
- unsigned short ledMask; // physical GPIO pin mask
- unsigned short ledActiveLow; // reset bit to turn on LED
- unsigned short ledMaskFail; // physical GPIO pin mask for state failure
- unsigned short ledActiveLowFail;// reset bit to turn on LED
-} LED_MAP_PAIR, *PLED_MAP_PAIR;
-
-typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
-
-/* Flash storage address information that is determined by the flash driver. */
-typedef struct flashaddrinfo
-{
- int flash_persistent_start_blk;
- int flash_persistent_number_blk;
- int flash_persistent_length;
- unsigned long flash_persistent_blk_offset;
- int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
- int flash_scratch_pad_number_blk;
- int flash_scratch_pad_length;
- unsigned long flash_scratch_pad_blk_offset;
- int flash_nvram_start_blk;
- int flash_nvram_number_blk;
- int flash_nvram_length;
- unsigned long flash_nvram_blk_offset;
-} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
-
-// scratch pad defines
-/* SP - Persisten Scratch Pad format:
- sp header : 32 bytes
- tokenId-1 : 8 bytes
- tokenId-1 len : 4 bytes
- tokenId-1 data
- ....
- tokenId-n : 8 bytes
- tokenId-n len : 4 bytes
- tokenId-n data
-*/
-
-#define MAGIC_NUM_LEN 8
-#define MAGIC_NUMBER "gOGoBrCm"
-#define TOKEN_NAME_LEN 16
-#define SP_VERSION 1
-#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
-#define SP_RESERVERD 16
-
-typedef struct _SP_HEADER
-{
- char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
- int SPVersion; // version number
- int SPUsedLen; // used sp len
- char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
-} SP_HEADER, *PSP_HEADER;
-
-typedef struct _TOKEN_DEF
-{
- char tokenName[TOKEN_NAME_LEN];
- int tokenLen;
-} SP_TOKEN, *PSP_TOKEN;
-
-
-/*****************************************************************************/
-/* Function Prototypes */
-/*****************************************************************************/
-#if !defined(__ASM_ASM_H)
-void dumpaddr( unsigned char *pAddr, int nLen );
-
-int kerSysNvRamGet(char *string, int strLen, int offset);
-int kerSysNvRamSet(char *string, int strLen, int offset);
-int kerSysPersistentGet(char *string, int strLen, int offset);
-int kerSysPersistentSet(char *string, int strLen, int offset);
-int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
-int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
-int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
-int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
-int kerSysReleaseMacAddress( unsigned char *pucaAddr );
-int kerSysGetSdramSize( void );
-void kerSysGetBootline(char *string, int strLen);
-void kerSysSetBootline(char *string, int strLen);
-void kerSysMipsSoftReset(void);
-void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
-int kerSysFlashSizeGet(void);
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
-void kerSysDeregisterDyingGaspHandler(char *devname);
-void kerSysWakeupMonitorTask( void );
-#endif
-
-#define BOOT_CFE 0
-#define BOOT_REDBOOT 1
-
-extern int boot_loader_type;
-
-#endif /* _BOARD_H */
-
--- /dev/null
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+ [BOOT_LOADER_UNKNOWN] = "Unknown",
+ [BOOT_LOADER_CFE] = "CFE",
+ [BOOT_LOADER_REDBOOT] = "RedBoot"
+};
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+int boot_loader_type;
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+ /*
+ * This method only works, when we are booted directly from the CFE.
+ */
+ uint32_t cfe_handle = (uint32_t) fw_arg0;
+ uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+ uint32_t cfe_entry = (uint32_t) fw_arg2;
+ uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+ /* Check for CFE by finding the CFE magic number */
+ if (cfe_seal != CFE_EPTSEAL)
+ /* We are not booted from CFE */
+ return 0;
+
+ /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+ if (cfe_a1_val != 0)
+ return 0;
+
+ /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+ if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
+ return 0;
+
+ return 1;
+}
+
+static int __init detect_redboot(void)
+{
+ /* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */
+ if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19))
+ return 1;
+ return 0;
+}
+
+void __init detect_bootloader(void)
+{
+ if (detect_cfe()) {
+ boot_loader_type = BOOT_LOADER_CFE;
+ printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]);
+ }
+
+ if (detect_redboot()) {
+ boot_loader_type = BOOT_LOADER_REDBOOT;
+ }
+ else
+ boot_loader_type = BOOT_LOADER_UNKNOWN;
+}
+
+EXPORT_SYMBOL(boot_loader_type);
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/signal.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
#include <bcm_map_part.h>
#include <bcm_intr.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
+
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/time.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+#include <asm/mach-bcm963xx/6348_map_part.h>
-#include <bcm_map_part.h>
-#include <board.h>
-#include "boardparms.h"
-#include "softdsl/AdslCoreDefs.h"
-
-
-//char arcs_cmdline[CL_SIZE] __initdata = {0};
-/* inv_xde */
-int boot_loader_type;
-int prom_argc;
-char **prom_argv, **prom_envp;
+#include "../cfe/cfe_private.h"
-extern int do_syslog(int, char *, int);
+extern void __init detect_bootloader(void);
extern void serial_init(void);
-extern void __init InitNvramInfo( void );
-extern void kerSysFlashInit( void );
-extern unsigned long get_nvram_start_addr(void);
-void __init create_root_nfs_cmdline( char *cmdline );
+extern int boot_loader_type;
#define MACH_BCM MACH_BCM96348
const char *get_system_type(void)
{
- /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-
- return( pNvramData->szBoardId );*/
- return "brcm63xx";
-}
-
-unsigned long getMemorySize(void)
-{
- unsigned long ulSdramType = BOARD_SDRAM_TYPE;
-
- unsigned long ulSdramSize;
-
- switch( ulSdramType )
- {
- case BP_MEMORY_16MB_1_CHIP:
- case BP_MEMORY_16MB_2_CHIP:
- ulSdramSize = 16 * 1024 * 1024;
- break;
- case BP_MEMORY_32MB_1_CHIP:
- case BP_MEMORY_32MB_2_CHIP:
- ulSdramSize = 32 * 1024 * 1024;
- break;
- case BP_MEMORY_64MB_2_CHIP:
- ulSdramSize = 64 * 1024 * 1024;
- break;
- default:
- ulSdramSize = 8 * 1024 * 1024;
- break;
- }
- if (boot_loader_type == BOOT_CFE)
- return ulSdramSize;
- else
- // assume that there is one contiguous memory map
- return boot_mem_map.map[0].size;
+ return "Broadcom BCM963xx";
}
-/* --------------------------------------------------------------------------
- Name: prom_init
- -------------------------------------------------------------------------- */
void __init prom_init(void)
{
- extern ulong r4k_interval;
+ serial_init();
- serial_init();
+ printk( "%s prom init\n", get_system_type() );
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ PERF->IrqMask = 0;
- if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
- strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
- }
+ detect_bootloader();
- if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
- boot_loader_type = BOOT_CFE;
- }
- else {
- boot_loader_type = BOOT_REDBOOT;
- }
-
- do_syslog(8, NULL, 8);
-
- printk( "%s prom init\n", get_system_type() );
-
- PERF->IrqMask = 0;
-
- arcs_cmdline[0] = '\0';
-
- if (boot_loader_type == BOOT_CFE)
- add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
- else
- add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-
- mips_machgroup = MACH_GROUP_BRCM;
- mips_machtype = MACH_BCM;
-
- BpSetBoardId("96348GW-10");
+ if (boot_loader_type == BOOT_LOADER_CFE) {
+ cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3);
+ add_memory_region(0, (boot_mem_map.map[0].size - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+ }
+ else
+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+
+ mips_machgroup = MACH_GROUP_BRCM;
+ mips_machtype = MACH_BCM;
}
-/* --------------------------------------------------------------------------
- Name: prom_free_prom_memory
-Abstract:
- -------------------------------------------------------------------------- */
void __init prom_free_prom_memory(void)
{
-
+ /* We do not have any memory to free */
}
-
#include <asm/mc146818rtc.h>
#include <bcm_map_part.h>
+#include <6348_map_part.h>
#include <board.h>
#define SER63XX_DEFAULT_BAUD 115200
-------------------------------------------------------------------------- */
void __init serial_init(void)
{
- UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
+ u32 tmpVal = SER63XX_DEFAULT_BAUD;
ULONG clockFreqHz;
#if defined(CONFIG_BCM96345)
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
#include <asm/time.h>
#include <asm/reboot.h>
#include <asm/gdb-stub.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
extern void brcm_time_init(void);
-extern unsigned long getMemorySize(void);
+extern int boot_loader_type;
#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
#include <linux/pci.h>
*/
static void brcm_machine_restart(char *command)
{
- const unsigned long ulSoftReset = 0x00000001;
- unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
- *pulPllCtrl |= ulSoftReset;
+ const unsigned long ulSoftReset = 0x00000001;
+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
+ *pulPllCtrl |= ulSoftReset;
}
static void brcm_machine_halt(void)
{
- printk("System halted\n");
- while (1);
+ printk("System halted\n");
+ while (1);
}
#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
static int mpi_init(void)
{
- unsigned long data;
- unsigned int chipid;
- unsigned int chiprev;
- unsigned int sdramsize;
-
- chipid = (PERF->RevID & 0xFFFF0000) >> 16;
- chiprev = (PERF->RevID & 0xFF);
- sdramsize = getMemorySize();
- /*
- * Init the pci interface
- */
- data = GPIO->GPIOMode; // GPIO mode register
- data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
- GPIO->GPIOMode = data; // PCI internal arbiter
+ unsigned long data;
+ unsigned int chipid, chiprev, sdramsize;
+
+ printk("Broadcom BCM963xx MPI\n");
+ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
+ chiprev = (PERF->RevID & 0xFF);
+
+ if (boot_loader_type == BOOT_LOADER_CFE)
+ sdramsize = boot_mem_map.map[0].size;
+ else
+ sdramsize = 0x01000000;
+ /*
+ * Init the pci interface
+ */
+ data = GPIO->GPIOMode; // GPIO mode register
+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
+ GPIO->GPIOMode = data; // PCI internal arbiter
/*
* In the BCM6348 CardBus support is defaulted to Slot 0
}
#endif
-static int __init brcm63xx_setup(void)
+void __init plat_mem_setup(void)
{
- extern int panic_timeout;
-
- _machine_restart = brcm_machine_restart;
- _machine_halt = brcm_machine_halt;
- pm_power_off = brcm_machine_halt;
+ _machine_restart = brcm_machine_restart;
+ _machine_halt = brcm_machine_halt;
+ pm_power_off = brcm_machine_halt;
- board_time_init = brcm_time_init;
-
- panic_timeout = 5;
+ board_time_init = brcm_time_init;
#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
- /* mpi initialization */
- mpi_init();
+ /* mpi initialization */
+ mpi_init();
#endif
- return 0;
-}
-
-void __init plat_mem_setup(void)
-{
- brcm63xx_setup();
-}
-
-/***************************************************************************
- * C++ New and delete operator functions
- ***************************************************************************/
-
-/* void *operator new(unsigned int sz) */
-void *_Znwj(unsigned int sz)
-{
- return( kmalloc(sz, GFP_KERNEL) );
}
-
-/* void *operator new[](unsigned int sz)*/
-void *_Znaj(unsigned int sz)
-{
- return( kmalloc(sz, GFP_KERNEL) );
-}
-
-/* placement new operator */
-/* void *operator new (unsigned int size, void *ptr) */
-void *ZnwjPv(unsigned int size, void *ptr)
-{
- return ptr;
-}
-
-/* void operator delete(void *m) */
-void _ZdlPv(void *m)
-{
- kfree(m);
-}
-
-/* void operator delete[](void *m) */
-void _ZdaPv(void *m)
-{
- kfree(m);
-}
-
-EXPORT_SYMBOL(_Znwj);
-EXPORT_SYMBOL(_Znaj);
-EXPORT_SYMBOL(ZnwjPv);
-EXPORT_SYMBOL(_ZdlPv);
-EXPORT_SYMBOL(_ZdaPv);
-
+++ /dev/null
-#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
-
#include <asm/div64.h>
#include <asm/time.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
#include <bcm_map_part.h>
#include <bcm_intr.h>
static inline unsigned long __init calculateCpuSpeed(void)
{
- UINT32 pllStrap = PERF->PllStrap;
+ u32 pllStrap = PERF->PllStrap;
int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
--- /dev/null
+#
+# Makefile for the Broadcom Common Firmware Environment support
+#
+
+obj-y += cfe.o
--- /dev/null
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cfe.h>
+
+#include "cfe_private.h"
+
+
+static cfe_uint_t cfe_handle;
+static int (*cfe_trampoline)(long handle, long iocb);
+
+
+#include <linux/kernel.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+ unsigned long fwarg2, unsigned long fwarg3)
+{
+ if (fwarg3 == 0x80300000) {
+ /* WRT54G workaround */
+ fwarg3 = CFE_EPTSEAL;
+ fwarg2 = 0xBFC00500;
+ }
+ if (fwarg3 != CFE_EPTSEAL) {
+ /* We are not booted from CFE */
+ return;
+ }
+ if (fwarg1 == 0) {
+ /* We are on the boot CPU */
+ cfe_handle = (cfe_uint_t)fwarg0;
+ cfe_trampoline = CFE_TO_PTR(fwarg2);
+ }
+}
+
+int cfe_vprintk(const char *fmt, va_list args)
+{
+ static char buffer[1024];
+ static DEFINE_SPINLOCK(lock);
+ static const char pfx[] = "CFE-console: ";
+ static const size_t pfx_len = sizeof(pfx) - 1;
+ unsigned long flags;
+ int len, cnt, pos;
+ int handle;
+ int res;
+
+ if (!cfe_present())
+ return -ENODEV;
+
+ spin_lock_irqsave(&lock, flags);
+ handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+ if (CFE_ISERR(handle)) {
+ len = -EIO;
+ goto out;
+ }
+ strcpy(buffer, pfx);
+ len = vscnprintf(buffer + pfx_len,
+ sizeof(buffer) - pfx_len - 2,
+ fmt, args);
+ len += pfx_len;
+ /* The CFE console requires CR-LF line-ends.
+ * Add a CR, if we only terminate lines with a LF.
+ * This does only fix CR-LF at the end of the string.
+ * So for multiple lines, use multiple cfe_vprintk calls.
+ */
+ if (len > 1 &&
+ buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
+ buffer[len - 1] = '\r';
+ buffer[len] = '\n';
+ len += 1;
+ }
+ cnt = len;
+ pos = 0;
+ while (cnt > 0) {
+ res = cfe_write(handle, buffer + pos, len - pos);
+ if (CFE_ISERR(res)) {
+ len = -EIO;
+ goto out;
+ }
+ cnt -= res;
+ pos += res;
+ }
+out:
+ spin_unlock_irqrestore(&lock, flags);
+
+ return len;
+}
+
+int cfe_printk(const char *fmt, ...)
+{
+ va_list args;
+ int res;
+
+ va_start(args, fmt);
+ res = cfe_vprintk(fmt, args);
+ va_end(args);
+
+ return res;
+}
+
+static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
+{
+ if (!cfe_present())
+ return CFE_ERR_UNSUPPORTED;
+ return cfe_trampoline((long)cfe_handle, (long)iocb);
+}
+
+int cfe_present(void)
+{
+ return (cfe_trampoline != NULL);
+}
+
+int cfe_close(int handle)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_CLOSE;
+ iocb.handle = handle;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_CPUCTL;
+ iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+ iocb.cpuctl.number = cpu;
+ iocb.cpuctl.command = CFE_CPU_CMD_START;
+ iocb.cpuctl.gp = gp;
+ iocb.cpuctl.sp = sp;
+ iocb.cpuctl.a1 = a1;
+ iocb.cpuctl.start_addr = (long)fn;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_stop(int cpu)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_CPUCTL;
+ iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+ iocb.cpuctl.number = cpu;
+ iocb.cpuctl.command = CFE_CPU_CMD_STOP;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_ENUM;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.index = idx;
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = namelen;
+ iocb.envbuf.val = PTR_TO_CFE(val);
+ iocb.envbuf.val_len = vallen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumdev(int idx, char *name, int namelen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+
+ iocb.fcode = CFE_CMD_DEV_ENUM;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.index = idx;
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = namelen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+ u64 *type)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+
+ iocb.fcode = CFE_CMD_FW_MEMENUM;
+ iocb.flags = flags;
+ iocb.psize = sizeof(struct cfe_iocb_meminfo);
+ iocb.meminfo.index = idx;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (!CFE_ISERR(iocb.status)) {
+ *start = iocb.meminfo.addr;
+ *length = iocb.meminfo.size;
+ *type = iocb.meminfo.type;
+ }
+
+ return iocb.status;
+}
+
+int cfe_exit(int warm, int status)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+printk("CFE REBOOT\n");
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_RESTART;
+ if (warm)
+ iocb.flags = CFE_FLG_WARMSTART;
+ iocb.psize = sizeof(struct cfe_iocb_exitstat);
+ iocb.exitstat.status = status;
+
+printk("CALL\n");
+ err = cfe_iocb_dispatch(&iocb);
+printk("DONE\n");
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_flushcache(int flags)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
+ iocb.flags = flags;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getdevinfo(char *name)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_GETINFO;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.ptr = PTR_TO_CFE(name);
+ iocb.buffer.length = strlen(name);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.devflags;
+}
+
+int cfe_getenv(char *name, char *dest, int destlen)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ dest[0] = '\0';
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_GET;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = strlen(name);
+ iocb.envbuf.val = PTR_TO_CFE(dest);
+ iocb.envbuf.val_len = destlen;
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getfwinfo(struct cfe_fwinfo *info)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_GETINFO;
+ iocb.psize = sizeof(struct cfe_iocb_fwinfo);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return err;
+
+ info->version = iocb.fwinfo.version;
+ info->totalmem = iocb.fwinfo.totalmem;
+ info->flags = iocb.fwinfo.flags;
+ info->boardid = iocb.fwinfo.boardid;
+ info->bootarea_va = iocb.fwinfo.bootarea_va;
+ info->bootarea_pa = iocb.fwinfo.bootarea_pa;
+ info->bootarea_size = iocb.fwinfo.bootarea_size;
+
+ return iocb.status;
+}
+
+int cfe_getstdhandle(int handletype)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_GETHANDLE;
+ iocb.flags = handletype;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.handle;
+}
+
+int cfe_getticks(s64 *ticks)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_FW_GETTIME;
+ iocb.psize = sizeof(struct cfe_iocb_time);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (!CFE_ISERR(iocb.status))
+ *ticks = iocb.time.ticks;
+
+ return iocb.status;
+}
+
+int cfe_inpstat(int handle)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_INPSTAT;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_inpstat);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.inpstat.status;
+}
+
+int cfe_ioctl(int handle, unsigned int ioctlnum,
+ unsigned char *buffer, int length,
+ int *retlen, u64 offset)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_IOCTL;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ioctlcmd = ioctlnum;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+ if (retlen)
+ *retlen = iocb.buffer.retlen;
+
+ return iocb.status;
+}
+
+int cfe_open(char *name)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_OPEN;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.ptr = PTR_TO_CFE(name);
+ iocb.buffer.length = strlen(name);
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.handle;
+}
+
+int cfe_read(int handle, unsigned char *buffer, int length)
+{
+ return cfe_readblk(handle, 0, buffer, length);
+}
+
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_READ;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.retlen;
+}
+
+int cfe_setenv(char *name, char *val)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_ENV_SET;
+ iocb.psize = sizeof(struct cfe_iocb_envbuf);
+ iocb.envbuf.name = PTR_TO_CFE(name);
+ iocb.envbuf.name_len = strlen(name);
+ iocb.envbuf.val = PTR_TO_CFE(val);
+ iocb.envbuf.val_len = strlen(val);
+
+ err = cfe_iocb_dispatch(&iocb);
+
+ return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_write(int handle, unsigned char *buffer, int length)
+{
+ return cfe_writeblk(handle, 0, buffer, length);
+}
+
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+ struct cfe_iocb iocb;
+ int err;
+
+ memset(&iocb, 0, sizeof(iocb));
+ iocb.fcode = CFE_CMD_DEV_WRITE;
+ iocb.handle = handle;
+ iocb.psize = sizeof(struct cfe_iocb_buf);
+ iocb.buffer.offset = offset;
+ iocb.buffer.ptr = PTR_TO_CFE(buffer);
+ iocb.buffer.length = length;
+
+ err = cfe_iocb_dispatch(&iocb);
+ if (CFE_ISERR(err))
+ return err;
+ if (CFE_ISERR(iocb.status))
+ return iocb.status;
+
+ return iocb.buffer.retlen;
+}
--- /dev/null
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_PRIVATE_H_
+#define LINUX_CFE_PRIVATE_H_
+
+#ifndef __ASSEMBLY__
+
+/* Seal indicating CFE's presence, passed to the kernel. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_CMD_FW_GETINFO 0
+#define CFE_CMD_FW_RESTART 1
+#define CFE_CMD_FW_BOOT 2
+#define CFE_CMD_FW_CPUCTL 3
+#define CFE_CMD_FW_GETTIME 4
+#define CFE_CMD_FW_MEMENUM 5
+#define CFE_CMD_FW_FLUSHCACHE 6
+
+#define CFE_CMD_DEV_GETHANDLE 9
+#define CFE_CMD_DEV_ENUM 10
+#define CFE_CMD_DEV_OPEN 11
+#define CFE_CMD_DEV_INPSTAT 12
+#define CFE_CMD_DEV_READ 13
+#define CFE_CMD_DEV_WRITE 14
+#define CFE_CMD_DEV_IOCTL 15
+#define CFE_CMD_DEV_CLOSE 16
+#define CFE_CMD_DEV_GETINFO 17
+
+#define CFE_CMD_ENV_ENUM 20
+#define CFE_CMD_ENV_GET 22
+#define CFE_CMD_ENV_SET 23
+#define CFE_CMD_ENV_DEL 24
+
+#define CFE_CMD_MAX 32
+
+#define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */
+
+typedef u64 cfe_uint_t;
+typedef s64 cfe_int_t;
+typedef s64 cfe_ptr_t;
+
+/* Cast a pointer from native to CFE-API pointer and back */
+#define CFE_TO_PTR(p) ((void *)(unsigned long)(p))
+#define PTR_TO_CFE(p) ((cfe_ptr_t)(unsigned long)(p))
+
+struct cfe_iocb_buf {
+ cfe_uint_t offset; /* offset on device (bytes) */
+ cfe_ptr_t ptr; /* pointer to a buffer */
+ cfe_uint_t length; /* length of this buffer */
+ cfe_uint_t retlen; /* returned length (for read ops) */
+ union {
+ cfe_uint_t ioctlcmd; /* IOCTL command (used only for IOCTLs) */
+ cfe_uint_t devflags; /* Returned device info flags */
+ };
+};
+
+struct cfe_iocb_inpstat {
+ cfe_uint_t status; /* 1 means input available */
+};
+
+struct cfe_iocb_envbuf {
+ cfe_int_t index; /* 0-based enumeration index */
+ cfe_ptr_t name; /* name string buffer */
+ cfe_int_t name_len; /* size of name buffer */
+ cfe_ptr_t val; /* value string buffer */
+ cfe_int_t val_len; /* size of value string buffer */
+};
+
+struct cfe_iocb_cpuctl {
+ cfe_uint_t number; /* cpu number to control */
+ cfe_uint_t command; /* command to issue to CPU */
+ cfe_uint_t start_addr; /* CPU start address */
+ cfe_uint_t gp; /* starting GP value */
+ cfe_uint_t sp; /* starting SP value */
+ cfe_uint_t a1; /* starting A1 value */
+};
+
+struct cfe_iocb_time {
+ cfe_int_t ticks; /* current time in ticks */
+};
+
+struct cfe_iocb_exitstat {
+ cfe_int_t status;
+};
+
+struct cfe_iocb_meminfo {
+ cfe_int_t index; /* 0-based enumeration index */
+ cfe_int_t type; /* type of memory block */
+ cfe_uint_t addr; /* physical start address */
+ cfe_uint_t size; /* block size */
+};
+
+struct cfe_iocb_fwinfo {
+ cfe_int_t version; /* major, minor, eco version */
+ cfe_int_t totalmem; /* total installed mem */
+ cfe_int_t flags; /* various flags */
+ cfe_int_t boardid; /* board ID */
+ cfe_int_t bootarea_va; /* VA of boot area */
+ cfe_int_t bootarea_pa; /* PA of boot area */
+ cfe_int_t bootarea_size; /* size of boot area */
+ cfe_int_t reserved1;
+ cfe_int_t reserved2;
+ cfe_int_t reserved3;
+};
+
+/* CFE I/O Control Block */
+struct cfe_iocb {
+ cfe_uint_t fcode; /* IOCB function code */
+ cfe_int_t status; /* return status */
+ cfe_int_t handle; /* file/device handle */
+ cfe_uint_t flags; /* flags for this IOCB */
+ cfe_uint_t psize; /* size of parameter list */
+ union {
+ struct cfe_iocb_buf buffer; /* buffer parameters */
+ struct cfe_iocb_inpstat inpstat; /* input status parameters */
+ struct cfe_iocb_envbuf envbuf; /* environment function parameters */
+ struct cfe_iocb_cpuctl cpuctl; /* CPU control parameters */
+ struct cfe_iocb_time time; /* timer parameters */
+ struct cfe_iocb_meminfo meminfo; /* memory arena info parameters */
+ struct cfe_iocb_fwinfo fwinfo; /* firmware information */
+ struct cfe_iocb_exitstat exitstat; /* Exit Status */
+ };
+};
+
+
+#include <linux/init.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+ unsigned long fwarg2, unsigned long fwarg3);
+
+#else /* __ASSEMBLY__ */
+
+ .macro cfe_early_init
+#ifdef CONFIG_CFE
+ jal cfe_setup
+#endif
+ .endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* LINUX_CFE_PRIVATE_H_ */
#include <bcmpci.h>
#include <bcm_intr.h>
#include <bcm_map_part.h>
+#include <6348_intr.h>
+#include <6348_map_part.h>
static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
#include <bcm_intr.h>
#include <bcm_map_part.h>
+#include <6348_intr.h>
+#include <6348_map_part.h>
#include <bcmpci.h>
#include <linux/delay.h>
/*
- * $Id$
- * Copyright (C) 2006 Florian Fainelli <florian@openwrt.org>
- * Mike Albon <malbon@openwrt.org>
- * Copyright (C) $Date$ $Author$
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * original functions for finding root filesystem from Mike Baker
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* This is the BCM963xx flash map driver, in its actual state it only supports BCM96348 devices
- * this driver is able to manage both bootloader we found on these boards : CFE and RedBoot
- *
- * RedBoot :
- * - this bootloader allows us to parse partitions and therefore deduce the MTD partition table
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * CFE :
- * - CFE partitionning can be detected as for BCM947xx devices
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
+ * Flash mapping for BCM963XX boards
*/
-#include <asm/io.h>
#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/mtd/map.h>
+#include <linux/wait.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
-#include <linux/vmalloc.h>
-#include <board.h>
+#endif
+#include <linux/squashfs_fs.h>
+#include <linux/jffs2.h>
+#include <linux/crc32.h>
+#include <asm/io.h>
-#define WINDOW_ADDR 0x1FC00000 /* Real address of the flash */
-#define WINDOW_SIZE 0x400000 /* Size of flash */
-#define BUSWIDTH 2 /* Buswidth */
-#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
-#define IMAGE_LEN 10 /* Length of Length Field */
-#define ADDRESS_LEN 12 /* Length of Address field */
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#include <asm/mach-bcm963xx/bootloaders.h>
-extern int boot_loader_type; /* For RedBoot / CFE detection */
+extern int boot_loader_type;
extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
static struct mtd_partition *parsed_parts;
-static void __exit bcm963xx_mtd_cleanup(void);
-static struct mtd_info *bcm963xx_mtd_info;
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1
+#define TRX_MAX_LEN 0x3A0000
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET 3
-static struct map_info bcm963xx_map = {
- .name = "bcm963xx",
- .size = WINDOW_SIZE,
- .bankwidth = BUSWIDTH,
- .phys = WINDOW_ADDR,
+struct trx_header {
+ u32 magic; /* "HDR0" */
+ u32 len; /* Length of file including header */
+ u32 crc32; /* 32-bit CRC from flag_version to end of file */
+ u32 flag_version; /* 0:15 flags, 16:31 version */
+ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
};
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define NVRAM_SPACE 0x8000
+#define WINDOW_ADDR 0x1FC00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
-int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts)
-{
- int nrparts = 2, curpart = 0; // CFE and NVRAM always present.
- struct bcm963xx_cfe_map {
- unsigned char tagVersion[4]; // Version of the image tag
- unsigned char sig_1[20]; // Company Line 1
- unsigned char sig_2[14]; // Company Line 2
- unsigned char chipid[6]; // Chip this image is for
- unsigned char boardid[16]; // Board name
- unsigned char bigEndian[2]; // Map endianness -- 1 BE 0 LE
- unsigned char totalLength[IMAGE_LEN]; //Total length of image
- unsigned char cfeAddress[ADDRESS_LEN]; // Address in memory of CFE
- unsigned char cfeLength[IMAGE_LEN]; // Size of CFE
- unsigned char rootAddress[ADDRESS_LEN]; // Address in memory of rootfs
- unsigned char rootLength[IMAGE_LEN]; // Size of rootfs
- unsigned char kernelAddress[ADDRESS_LEN]; // Address in memory of kernel
- unsigned char kernelLength[IMAGE_LEN]; // Size of kernel
- unsigned char dualImage[2]; // Unused at present
- unsigned char inactiveFlag[2]; // Unused at present
- unsigned char reserved1[74]; // Reserved area not in use
- unsigned char imageCRC[4]; // CRC32 of images
- unsigned char reserved2[16]; // Unused at present
- unsigned char headerCRC[4]; // CRC32 of header excluding tagVersion
- unsigned char reserved3[16]; // Unused at present
- } *buf;
- struct mtd_partition *parts;
- int ret;
- size_t retlen;
- unsigned int rootfsaddr, kerneladdr, spareaddr;
- unsigned int rootfslen, kernellen, sparelen, totallen;
- int namelen = 0;
- int i;
- // Allocate memory for buffer
- buf = vmalloc(sizeof(struct bcm963xx_cfe_map));
-
- if (!buf)
- return -ENOMEM;
-
- // Get the tag
- ret = master->read(master,master->erasesize,sizeof(struct bcm963xx_cfe_map), &retlen, (void *)buf);
- if (retlen != sizeof(struct bcm963xx_cfe_map)){
- vfree(buf);
- return -EIO;
- };
- printk("bcm963xx: CFE boot tag found with version %s and board type %s.\n",buf->tagVersion,buf->boardid);
- // Get the values and calculate
- sscanf(buf->rootAddress,"%u", &rootfsaddr);
- rootfsaddr = rootfsaddr - EXTENDED_SIZE;
- sscanf(buf->rootLength, "%u", &rootfslen);
- sscanf(buf->kernelAddress, "%u", &kerneladdr);
- kerneladdr = kerneladdr - EXTENDED_SIZE;
- sscanf(buf->kernelLength, "%u", &kernellen);
- sscanf(buf->totalLength, "%u", &totallen);
- spareaddr = ROUNDUP(totallen,master->erasesize) + master->erasesize;
- sparelen = master->size - spareaddr - master->erasesize;
- // Determine number of partitions
- namelen = 8;
- if (rootfslen > 0){
- nrparts++;
- namelen =+ 6;
- };
- if (kernellen > 0){
- nrparts++;
- namelen =+ 6;
- };
- if (sparelen > 0){
- nrparts++;
- namelen =+ 6;
- };
- // Ask kernel for more memory.
- parts = kmalloc(sizeof(*parts)*nrparts+10*nrparts, GFP_KERNEL);
- if (!parts){
- vfree(buf);
- return -ENOMEM;
- };
- memset(parts,0,sizeof(*parts)*nrparts+10*nrparts);
- // Start building partition list
- parts[curpart].name = "CFE";
- parts[curpart].offset = 0;
- parts[curpart].size = master->erasesize;
- curpart++;
- if (kernellen > 0){
- parts[curpart].name = "Kernel";
- parts[curpart].offset = kerneladdr;
- parts[curpart].size = kernellen;
- curpart++;
- };
- if (rootfslen > 0){
- parts[curpart].name = "Rootfs";
- parts[curpart].offset = rootfsaddr;
- parts[curpart].size = rootfslen;
- curpart++;
- };
- if (sparelen > 0){
- parts[curpart].name = "OpenWrt";
- parts[curpart].offset = spareaddr;
- parts[curpart].size = sparelen;
- curpart++;
- };
- parts[curpart].name = "NVRAM";
- parts[curpart].offset = master->size - master->erasesize;
- parts[curpart].size = master->erasesize;
- for (i = 0; i < nrparts; i++) {
- printk("bcm963xx: Partition %d is %s offset %x and length %x\n", i, parts[i].name, parts[i].offset, parts[i].size);
- }
- *pparts = parts;
- vfree(buf);
- return nrparts;
+#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
+
+static struct mtd_info *bcm963xx_mtd;
+
+static struct map_info bcm963xx_map = {
+ .name = "Physically mapped flash",
+ .size = WINDOW_SIZE,
+ .bankwidth = BUSWIDTH,
+ .phys = WINDOW_ADDR,
};
+#ifdef CONFIG_MTD_PARTITIONS
+
static struct mtd_partition bcm963xx_parts[] = {
- { name: "bootloader", size: 0, offset: 0, mask_flags: MTD_WRITEABLE },
- { name: "rootfs", size: 0, offset: 0},
- { name: "jffs2", size: 5 * 0x10000, offset: 57*0x10000}
+ { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
+ { name: "linux", offset: 0, size: 0, },
+ { name: "rootfs", offset: 0, size: 0, },
+ { name: "nvram", offset: 0, size: 0, },
+ { name: "OpenWrt", offset: 0, size: 0, },
+ { name: NULL, },
};
-static int bcm963xx_parts_size = sizeof(bcm963xx_parts) / sizeof(bcm963xx_parts[0]);
+static int __init
+find_cfe_size(struct mtd_info *mtd, size_t size)
+{
+ struct trx_header *trx;
+ unsigned char buf[512];
+ int off;
+ size_t len;
+ int blocksize;
+
+ trx = (struct trx_header *) buf;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
-static int bcm963xx_detect_cfe(struct mtd_info *master)
+ for (off = (128*1024); off < size; off += blocksize) {
+ memset(buf, 0xe5, sizeof(buf));
+
+ /*
+ * Read into buffer
+ */
+ if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
+ len != sizeof(buf))
+ continue;
+
+ /* found a TRX header */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+ goto found;
+ }
+ }
+
+ printk(KERN_NOTICE
+ "%s: Couldn't find bootloader size\n",
+ mtd->name);
+ return -1;
+
+ found:
+ printk(KERN_NOTICE "bootloader size: %d\n", off);
+ return off;
+
+}
+
+/*
+ * Copied from mtdblock.c
+ *
+ * Cache stuff...
+ *
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests. To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
{
- int idoffset = 0x4e0;
- static char idstring[8] = "CFE1CFE1";
- char buf[8];
- int ret;
- size_t retlen;
-
- ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
- printk("bcm963xx: Read Signature value of %s\n", buf);
- return strcmp(idstring,buf);
+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+ wake_up(wait_q);
}
-static int __init bcm963xx_mtd_init(void)
+static int erase_write (struct mtd_info *mtd, unsigned long pos,
+ int len, const char *buf)
{
- printk("bcm963xx: 0x%08x at 0x%08x\n", WINDOW_SIZE, WINDOW_ADDR);
- bcm963xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!bcm963xx_map.virt) {
- printk("bcm963xx: Failed to ioremap\n");
- return -EIO;
- }
-
- simple_map_init(&bcm963xx_map);
-
- bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
-
- if (bcm963xx_mtd_info) {
- bcm963xx_mtd_info->owner = THIS_MODULE;
-
- //if (boot_loader_type == BOOT_CFE)
- if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0)
- {
- int parsed_nr_parts = 0;
- char * part_type;
- printk("bcm963xx: CFE bootloader detected\n");
- //add_mtd_device(bcm963xx_mtd_info);
- //add_mtd_partitions(bcm963xx_mtd_info, bcm963xx_parts, bcm963xx_parts_size);
- if (parsed_nr_parts == 0) {
- int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts);
- if (ret > 0) {
- part_type = "CFE";
- parsed_nr_parts = ret;
- }
- }
- add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
- return 0;
- }
- else
- {
- int parsed_nr_parts = 0;
- char * part_type;
-
- if (bcm963xx_mtd_info->size > 0x00400000) {
- printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
- bcm963xx_map.virt = (unsigned long)(EXTENDED_SIZE);
- }
+ struct erase_info erase;
+ DECLARE_WAITQUEUE(wait, current);
+ wait_queue_head_t wait_q;
+ size_t retlen;
+ int ret;
+
+ /*
+ * First, let's erase the flash block.
+ */
+
+ init_waitqueue_head(&wait_q);
+ erase.mtd = mtd;
+ erase.callback = erase_callback;
+ erase.addr = pos;
+ erase.len = len;
+ erase.priv = (u_long)&wait_q;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&wait_q, &wait);
+
+ ret = mtd->erase(mtd, &erase);
+ if (ret) {
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&wait_q, &wait);
+ printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+ "on \"%s\" failed\n",
+ pos, len, mtd->name);
+ return ret;
+ }
+
+ schedule(); /* Wait for erase to finish. */
+ remove_wait_queue(&wait_q, &wait);
+
+ /*
+ * Next, writhe data to flash.
+ */
+
+ ret = mtd->write (mtd, pos, len, &retlen, buf);
+ if (ret)
+ return ret;
+ if (retlen != len)
+ return -EIO;
+ return 0;
+}
+
+
+
+
+static int __init
+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
+{
+ struct trx_header trx, *trx2;
+ unsigned char buf[512], *block;
+ int off, blocksize;
+ u32 i, crc = ~0;
+ size_t len;
+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
+
+ for (off = (128*1024); off < size; off += blocksize) {
+ memset(&trx, 0xe5, sizeof(trx));
+
+ /*
+ * Read into buffer
+ */
+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+ len != sizeof(trx))
+ continue;
+
+ /* found a TRX header */
+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+ part->offset = le32_to_cpu(trx.offsets[2]) ? :
+ le32_to_cpu(trx.offsets[1]);
+ part->size = le32_to_cpu(trx.len);
+
+ part->size -= part->offset;
+ part->offset += off;
+
+ goto found;
+ }
+ }
+
+ printk(KERN_NOTICE
+ "%s: Couldn't find root filesystem\n",
+ mtd->name);
+ return -1;
+
+ found:
+ if (part->size == 0)
+ return 0;
+
+ if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+ return 0;
+
+ if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
+ printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used);
+
+ /* Update the squashfs partition size based on the superblock info */
+ part->size = sb->bytes_used;
+ len = part->offset + part->size;
+ len += (mtd->erasesize - 1);
+ len &= ~(mtd->erasesize - 1);
+ part->size = len - part->offset;
+ } else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) {
+ printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name);
+
+ /* Move the squashfs outside of the trx */
+ part->size = 0;
+ } else {
+ printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name);
+ return 0;
+ }
+
+ if (trx.len != part->offset + part->size - off) {
+ /* Update the trx offsets and length */
+ trx.len = part->offset + part->size - off;
+
+ /* Update the trx crc32 */
+ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
+ if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
+ return 0;
+ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
+ }
+ trx.crc32 = crc;
+
+ /* read first eraseblock from the trx */
+ block = kmalloc(mtd->erasesize, GFP_KERNEL);
+ trx2 = (struct trx_header *) block;
+ if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
+ printk("Error accessing the first trx eraseblock\n");
+ return 0;
+ }
+
+ printk("Updating TRX offsets and length:\n");
+ printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
+ printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
+
+ /* Write updated trx header to the flash */
+ memcpy(block, &trx, sizeof(trx));
+ if (mtd->unlock)
+ mtd->unlock(mtd, off, mtd->erasesize);
+ erase_write(mtd, off, mtd->erasesize, block);
+ if (mtd->sync)
+ mtd->sync(mtd);
+ kfree(block);
+ printk("Done\n");
+ }
+
+ return part->size;
+}
+
+struct mtd_partition * __init
+init_mtd_partitions(struct mtd_info *mtd, size_t size)
+{
+ int cfe_size;
+
+ if ((cfe_size = find_cfe_size(mtd,size)) < 0)
+ return NULL;
+
+ /* boot loader */
+ bcm963xx_parts[0].offset = 0;
+ bcm963xx_parts[0].size = cfe_size;
+
+ /* nvram */
+ if (cfe_size != 384 * 1024) {
+ bcm963xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+ bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+ } else {
+ /* nvram (old 128kb config partition on netgear wgt634u) */
+ bcm963xx_parts[3].offset = bcm963xx_parts[0].size;
+ bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
+ }
+
+ /* linux (kernel and rootfs) */
+ if (cfe_size != 384 * 1024) {
+ bcm963xx_parts[1].offset = bcm963xx_parts[0].size;
+ bcm963xx_parts[1].size = bcm963xx_parts[3].offset -
+ bcm963xx_parts[1].offset;
+ } else {
+ /* do not count the elf loader, which is on one block */
+ bcm963xx_parts[1].offset = bcm963xx_parts[0].size +
+ bcm963xx_parts[3].size + mtd->erasesize;
+ bcm963xx_parts[1].size = size -
+ bcm963xx_parts[0].size -
+ (2*bcm963xx_parts[3].size) -
+ mtd->erasesize;
+ }
+
+ /* find and size rootfs */
+ if (find_root(mtd,size,&bcm963xx_parts[2])==0) {
+ /* entirely jffs2 */
+ bcm963xx_parts[4].name = NULL;
+ bcm963xx_parts[2].size = size - bcm963xx_parts[2].offset -
+ bcm963xx_parts[3].size;
+ } else {
+ /* legacy setup */
+ /* calculate leftover flash, and assign it to the jffs2 partition */
+ if (cfe_size != 384 * 1024) {
+ bcm963xx_parts[4].offset = bcm963xx_parts[2].offset +
+ bcm963xx_parts[2].size;
+ if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) {
+ bcm963xx_parts[4].offset += mtd->erasesize -
+ (bcm963xx_parts[4].offset % mtd->erasesize);
+ }
+ bcm963xx_parts[4].size = bcm963xx_parts[3].offset -
+ bcm963xx_parts[4].offset;
+ } else {
+ bcm963xx_parts[4].offset = bcm963xx_parts[2].offset +
+ bcm963xx_parts[2].size;
+ if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) {
+ bcm963xx_parts[4].offset += mtd->erasesize -
+ (bcm963xx_parts[4].offset % mtd->erasesize);
+ }
+ bcm963xx_parts[4].size = size - bcm963xx_parts[3].size -
+ bcm963xx_parts[4].offset;
+ }
+ }
+
+ return bcm963xx_parts;
+}
+#endif
+
+int __init init_bcm963xx_map(void)
+{
+ size_t size;
+ int ret = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts;
+ int i;
+#endif
+
+ printk("BCM963xx flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
+ bcm963xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
+
+ if (!bcm963xx_map.virt) {
+ printk("Failed to ioremap\n");
+ return -EIO;
+ }
+ simple_map_init(&bcm963xx_map);
+
+ if (!(bcm963xx_mtd = do_map_probe("cfi_probe", &bcm963xx_map))) {
+ printk("Failed to do_map_probe\n");
+ iounmap((void *)bcm963xx_map.virt);
+ return -ENXIO;
+ }
+
+ bcm963xx_mtd->owner = THIS_MODULE;
+
+ size = bcm963xx_mtd->size;
+
+ printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
+
+#ifdef CONFIG_MTD_PARTITIONS
+ if (boot_loader_type == BOOT_LOADER_CFE) {
+ parts = init_mtd_partitions(bcm963xx_mtd, size);
+ for (i = 0; parts[i].name; i++);
+ ret = add_mtd_partitions(bcm963xx_mtd, parts, i);
+ if (ret) {
+ printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
+ goto fail;
+ }
+ }
+ else {
+ int parsed_nr_parts = 0;
+ char * part_type;
+
+ if (bcm963xx_mtd->size > 0x00400000) {
+ printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd->size);
+ bcm963xx_map.virt = (unsigned long)EXTENDED_SIZE;
+ }
#ifdef CONFIG_MTD_REDBOOT_PARTS
- if (parsed_nr_parts == 0) {
- int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
- if (ret > 0) {
- part_type = "RedBoot";
- parsed_nr_parts = ret;
- }
- }
+ if (parsed_nr_parts == 0) {
+ int ret = parse_redboot_partitions(bcm963xx_mtd, &parsed_parts, 0);
+ if (ret > 0) {
+ part_type = "RedBoot";
+ parsed_nr_parts = ret;
+ }
+ }
+#endif
+ add_mtd_partitions(bcm963xx_mtd, parsed_parts, parsed_nr_parts);
#endif
- add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
+ }
+ return 0;
- return 0;
- }
- }
- iounmap(bcm963xx_map.virt);
- return -ENXIO;
+ fail:
+ if (bcm963xx_mtd)
+ map_destroy(bcm963xx_mtd);
+ if (bcm963xx_map.virt)
+ iounmap((void *)bcm963xx_map.virt);
+ bcm963xx_map.virt = 0;
+ return ret;
}
-static void __exit bcm963xx_mtd_cleanup(void)
+void __exit cleanup_bcm963xx_map(void)
{
- if (bcm963xx_mtd_info) {
- del_mtd_partitions(bcm963xx_mtd_info);
- map_destroy(bcm963xx_mtd_info);
- }
-
- if (bcm963xx_map.virt) {
- iounmap(bcm963xx_map.virt);
- bcm963xx_map.virt = 0;
- }
+#ifdef CONFIG_MTD_PARTITIONS
+ del_mtd_partitions(bcm963xx_mtd);
+#endif
+ map_destroy(bcm963xx_mtd);
+ iounmap((void *)bcm963xx_map.virt);
}
-module_init(bcm963xx_mtd_init);
-module_exit(bcm963xx_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org> Mike Albon <malbon@openwrt.org>");
+module_init(init_bcm963xx_map);
+module_exit(cleanup_bcm963xx_map);
#include <board.h>
#include <bcm_map_part.h>
#include <bcm_intr.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
static DEFINE_SPINLOCK(bcm963xx_serial_lock);
--- /dev/null
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors: Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions. Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ * retain this copyright notice and list of conditions as they appear in
+ * the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ * Broadcom Corporation. The "Broadcom Corporation" name may not be
+ * used to endorse or promote products derived from this software
+ * without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_API_H_
+#define LINUX_CFE_API_H_
+
+#include <linux/types.h>
+
+
+#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1 /* memory is available */
+
+#define CFE_FLG_WARMSTART 0x00000001
+#define CFE_FLG_FULL_ARENA 0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE 0
+
+#define CFE_DEV_NETWORK 1
+#define CFE_DEV_DISK 2
+#define CFE_DEV_FLASH 3
+#define CFE_DEV_SERIAL 4
+#define CFE_DEV_CPU 5
+#define CFE_DEV_NVRAM 6
+#define CFE_DEV_CLOCK 7
+#define CFE_DEV_OTHER 8
+#define CFE_DEV_MASK 0x0F
+
+#define CFE_CACHE_FLUSH_D 1
+#define CFE_CACHE_INVAL_I 2
+#define CFE_CACHE_INVAL_D 4
+#define CFE_CACHE_INVAL_L2 8
+
+#define CFE_FWI_64BIT 0x00000001
+#define CFE_FWI_32BIT 0x00000002
+#define CFE_FWI_RELOC 0x00000004
+#define CFE_FWI_UNCACHED 0x00000008
+#define CFE_FWI_MULTICPU 0x00000010
+#define CFE_FWI_FUNCSIM 0x00000020
+#define CFE_FWI_RTLSIM 0x00000040
+
+struct cfe_fwinfo {
+ s64 version; /* major, minor, eco version */
+ s64 totalmem; /* total installed mem */
+ s64 flags; /* various flags */
+ s64 boardid; /* board ID */
+ s64 bootarea_va; /* VA of boot area */
+ s64 bootarea_pa; /* PA of boot area */
+ s64 bootarea_size; /* size of boot area */
+};
+
+
+/* The public CFE API */
+
+int cfe_present(void); /* Check if we booted from CFE. Returns bool */
+
+int cfe_getticks(s64 *ticks);
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enumdev(int idx, char *name, int namelen);
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+ u64 *type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flags);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(struct cfe_fwinfo *info);
+int cfe_getstdhandle(int handletype);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+ int length, int *retlen, u64 offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer,
+ int length);
+
+
+/* High level API */
+
+/* Print some information to CFE's console (most likely serial line) */
+int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+int cfe_vprintk(const char *fmt, va_list args);
+
+
+
+/* Error codes returned by the low API functions */
+
+#define CFE_ISERR(errcode) (errcode < 0)
+
+#define CFE_OK 0
+#define CFE_ERR -1 /* generic error */
+#define CFE_ERR_INV_COMMAND -2
+#define CFE_ERR_EOF -3
+#define CFE_ERR_IOERR -4
+#define CFE_ERR_NOMEM -5
+#define CFE_ERR_DEVNOTFOUND -6
+#define CFE_ERR_DEVOPEN -7
+#define CFE_ERR_INV_PARAM -8
+#define CFE_ERR_ENVNOTFOUND -9
+#define CFE_ERR_ENVREADONLY -10
+
+#define CFE_ERR_NOTELF -11
+#define CFE_ERR_NOT32BIT -12
+#define CFE_ERR_WRONGENDIAN -13
+#define CFE_ERR_BADELFVERS -14
+#define CFE_ERR_NOTMIPS -15
+#define CFE_ERR_BADELFFMT -16
+#define CFE_ERR_BADADDR -17
+
+#define CFE_ERR_FILENOTFOUND -18
+#define CFE_ERR_UNSUPPORTED -19
+
+#define CFE_ERR_HOSTUNKNOWN -20
+
+#define CFE_ERR_TIMEOUT -21
+
+#define CFE_ERR_PROTOCOLERR -22
+
+#define CFE_ERR_NETDOWN -23
+#define CFE_ERR_NONAMESERVER -24
+
+#define CFE_ERR_NOHANDLES -25
+#define CFE_ERR_ALREADYBOUND -26
+
+#define CFE_ERR_CANNOTSET -27
+#define CFE_ERR_NOMORE -28
+#define CFE_ERR_BADFILESYS -29
+#define CFE_ERR_FSNOTAVAIL -30
+
+#define CFE_ERR_INVBOOTBLOCK -31
+#define CFE_ERR_WRONGDEVTYPE -32
+#define CFE_ERR_BBCHECKSUM -33
+#define CFE_ERR_BOOTPROGCHKSUM -34
+
+#define CFE_ERR_LDRNOTAVAIL -35
+
+#define CFE_ERR_NOTREADY -36
+
+#define CFE_ERR_GETMEM -37
+#define CFE_ERR_SETMEM -38
+
+#define CFE_ERR_NOTCONN -39
+#define CFE_ERR_ADDRINUSE -40
+
+
+#endif /* LINUX_CFE_API_H_ */
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6338_INTR_H
+#define __6338_INTR_H
+
+/*=====================================================================*/
+/* BCM6338 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6338 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
+
+#endif /* __BCM6338_H */
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6338_MAP_H
+#define __BCM6338_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define SPI_BASE 0xfffe0c00
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define USBS_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+
+#define SPI_CLK_EN 0x0200
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 unused0;
+ uint32 GPIODir; /* bits 7:0 */
+ uint32 unused1;
+ uint32 GPIOio; /* bits 7:0 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 vRegConfig;
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+/*
+** Spi Controller
+*/
+
+typedef struct SpiControl {
+ uint16 spiCmd; /* (0x0): SPI command */
+#define SPI_CMD_START_IMMEDIATE 3
+
+#define SPI_CMD_COMMAND_SHIFT 0
+#define SPI_CMD_DEVICE_ID_SHIFT 4
+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
+
+ byte spiIntStatus; /* (0x2): SPI interrupt status */
+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
+
+ byte spiIntMask; /* (0x4): SPI interrupt mask */
+#define SPI_INTR_CMD_DONE 0x01
+#define SPI_INTR_CLEAR_ALL 0x1f
+
+ byte spiStatus; /* (0x5): SPI status */
+
+ byte spiClkCfg; /* (0x6): SPI clock configuration */
+
+ byte spiFillByte; /* (0x7): SPI fill byte */
+
+ byte unused0;
+ byte spiMsgTail; /* (0x9): msgtail */
+ byte unused1;
+ byte spiRxTail; /* (0xB): rxtail */
+
+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
+
+ byte spiMsgCtl; /* (0x40) control byte */
+#define HALF_DUPLEX_W 1
+#define HALF_DUPLEX_R 2
+#define SPI_MSG_TYPE_SHIFT 6
+#define SPI_BYTE_CNT_SHIFT 0
+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
+ byte unused3[64]; /* (0xc0 - 0xff) reserved */
+} SpiControl;
+
+#define SPI ((volatile SpiControl * const) SPI_BASE)
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[1]; /* size chip select configuration */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+
+#endif
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6345_INTR_H
+#define __6345_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6345 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6345 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+/* Internal peripheral interrupt IDs */
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
+
+/* DMA channel interrupt IDs */
+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
+
+
+#endif /* __BCM6345_H */
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6345_MAP_H
+#define __BCM6345_MAP_H
+
+
+#include "bcmtypes.h"
+#include "6345_intr.h"
+
+typedef struct IntControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define USB_CLK_EN 0x0100
+#define EMAC_CLK_EN 0x0080
+#define UART_CLK_EN 0x0008
+#define CPU_CLK_EN 0x0001
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 4
+#define EI_CLEAR_SHFT 8
+#define EI_MASK_SHFT 12
+#define EI_INSENS_SHFT 16
+#define EI_LEVEL_SHFT 20
+} IntControl;
+
+#define INTC_BASE 0xfffe0000
+#define PERF ((volatile IntControl * const) INTC_BASE)
+
+#define TIMR_BASE 0xfffe0200
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+ byte config;
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define XMITBREAK 0x40
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ uint32 baudword;
+
+ byte txf_levl;
+ byte rxf_levl;
+ byte fifocfg;
+ byte prog_out;
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense;
+ byte DeltaIPConfig_Mask;
+ byte DeltaIP_SyncIP;
+ uint16 intMask;
+ uint16 intStatus;
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOEMT 0x0020
+#define RXOVFERR 0x0080
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data;
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART_BASE 0xfffe0300
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint16 unused0;
+ byte unused1;
+ byte TBusSel;
+
+ uint16 unused2;
+ uint16 GPIODir;
+ byte unused3;
+ byte Leds;
+ uint16 GPIOio;
+
+ uint32 UartCtl;
+} GpioControl;
+
+#define GPIO_BASE 0xfffe0400
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+
+#endif
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6348_INTR_H
+#define __6348_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6348 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6348 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
+
+
+#endif /* __BCM6348_H */
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6348_MAP_H
+#define __BCM6348_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define MPI_BASE 0xfffe2000 /* MPI control registers */
+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+#define USBS_CLK_EN 0x0040
+#define USBH_CLK_EN 0x0100
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+ uint32 unused2[2]; /* (2c) */
+ uint32 PllStrap; /* (34) */
+#define PLL_N1_SHFT 20
+#define PLL_N1_MASK (7<<PLL_N1_SHFT)
+#define PLL_N2_SHFT 15
+#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
+#define PLL_M1_REF_SHFT 12
+#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
+#define PLL_M2_REF_SHFT 9
+#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
+#define PLL_M1_CPU_SHFT 6
+#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
+#define PLL_M1_BUS_SHFT 3
+#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
+#define PLL_M2_BUS_SHFT 0
+#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 GPIODir_high; /* bits 36:32 */
+ uint32 GPIODir; /* bits 31:00 */
+ uint32 GPIOio_high; /* bits 36:32 */
+ uint32 GPIOio; /* bits 31:00 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 GPIOMode;
+#define GROUP4_DIAG 0x00090000
+#define GROUP4_UTOPIA 0x00080000
+#define GROUP4_LEGACY_LED 0x00030000
+#define GROUP4_MII_SNOOP 0x00020000
+#define GROUP4_EXT_EPHY 0x00010000
+#define GROUP3_DIAG 0x00009000
+#define GROUP3_UTOPIA 0x00008000
+#define GROUP3_EXT_MII 0x00007000
+#define GROUP2_DIAG 0x00000900
+#define GROUP2_PCI 0x00000500
+#define GROUP1_DIAG 0x00000090
+#define GROUP1_UTOPIA 0x00000080
+#define GROUP1_SPI_UART 0x00000060
+#define GROUP1_SPI_MASTER 0x00000060
+#define GROUP1_MII_PCCARD 0x00000040
+#define GROUP1_MII_SNOOP 0x00000020
+#define GROUP1_EXT_EPHY 0x00000010
+#define GROUP0_DIAG 0x00000009
+#define GROUP0_EXT_MII 0x00000007
+
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
+#define GPIO_NUM_MAX_BITS_MASK 0x1f
+#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
+
+/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
+#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
+#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
+
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[7]; /* size chip select configuration */
+#define EBI_CS0_BASE 0
+#define EBI_CS1_BASE 1
+#define EBI_CS2_BASE 2
+#define EBI_CS3_BASE 3
+#define PCMCIA_COMMON_BASE 4
+#define PCMCIA_ATTRIBUTE_BASE 5
+#define PCMCIA_IO_BASE 6
+ uint32 unused0[2]; /* reserved */
+ uint32 ebi_control; /* ebi control */
+ uint32 unused1[4]; /* reserved */
+#define EBI_ACCESS_TIMEOUT 0x000007FF
+ uint32 pcmcia_cntl1; /* pcmcia control 1 */
+#define PCCARD_CARD_RESET 0x00040000
+#define CARDBUS_ENABLE 0x00008000
+#define PCMCIA_ENABLE 0x00004000
+#define PCMCIA_GPIO_ENABLE 0x00002000
+#define CARDBUS_IDSEL 0x00001F00
+#define VS2_OEN 0x00000080
+#define VS1_OEN 0x00000040
+#define VS2_OUT 0x00000020
+#define VS1_OUT 0x00000010
+#define VS2_IN 0x00000008
+#define VS1_IN 0x00000004
+#define CD2_IN 0x00000002
+#define CD1_IN 0x00000001
+#define VS_MASK 0x0000000C
+#define CD_MASK 0x00000003
+ uint32 unused2; /* reserved */
+ uint32 pcmcia_cntl2; /* pcmcia control 2 */
+#define PCMCIA_BYTESWAP_DIS 0x00000002
+#define PCMCIA_HALFWORD_EN 0x00000001
+#define RW_ACTIVE_CNT_BIT 2
+#define INACTIVE_CNT_BIT 8
+#define CE_SETUP_CNT_BIT 16
+#define CE_HOLD_CNT_BIT 24
+ uint32 unused3[40]; /* reserved */
+
+ uint32 sp0range; /* PCI to internal system bus address space */
+ uint32 sp0remap;
+ uint32 sp0cfg;
+ uint32 sp1range;
+ uint32 sp1remap;
+ uint32 sp1cfg;
+
+ uint32 EndianCfg;
+
+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
+
+ uint32 l2pmrange1; /* internal system bus to PCI memory space */
+#define PCI_SIZE_64K 0xFFFF0000
+#define PCI_SIZE_128K 0xFFFE0000
+#define PCI_SIZE_256K 0xFFFC0000
+#define PCI_SIZE_512K 0xFFF80000
+#define PCI_SIZE_1M 0xFFF00000
+#define PCI_SIZE_2M 0xFFE00000
+#define PCI_SIZE_4M 0xFFC00000
+#define PCI_SIZE_8M 0xFF800000
+#define PCI_SIZE_16M 0xFF000000
+#define PCI_SIZE_32M 0xFE000000
+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
+ uint32 l2pmremap1;
+#define CARDBUS_MEM 0x00000004
+#define MEM_WINDOW_EN 0x00000001
+ uint32 l2pmrange2;
+ uint32 l2pmbase2;
+ uint32 l2pmremap2;
+ uint32 l2piorange; /* internal system bus to PCI I/O space */
+ uint32 l2piobase;
+ uint32 l2pioremap;
+
+ uint32 pcimodesel;
+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
+
+ uint32 pciintstat; /* PCI interrupt mask/status */
+#define MAILBOX1_SENT 0x08
+#define MAILBOX0_SENT 0x04
+#define MAILBOX1_MSG_RCV 0x02
+#define MAILBOX0_MSG_RCV 0x01
+ uint32 locbuscntrl; /* internal system bus control */
+#define DIR_U2P_NOSWAP 0x00000002
+#define EN_PCI_GPIO 0x00000001
+ uint32 locintstat; /* internal system bus interrupt mask/status */
+#define CSERR 0x0200
+#define SERR 0x0100
+#define EXT_PCI_INT 0x0080
+#define DIR_FAILED 0x0040
+#define DIR_COMPLETE 0x0020
+#define PCI_CFG 0x0010
+ uint32 unused5[7];
+
+ uint32 mailbox0;
+ uint32 mailbox1;
+
+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
+#define PCI_CFG_REG_WRITE_EN 0x00000080
+#define PCI_CFG_ADDR 0x0000003C
+ uint32 pcicfgdata; /* internal system bus PCI configuration data */
+
+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
+ uint32 locch2intStat;
+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
+ uint32 locch2intMask;
+ uint32 unused6;
+ uint32 locch2descaddr;
+ uint32 locch2status1;
+#define LOCAL_DESC_STATE 0xE0000000
+#define PCI_DESC_STATE 0x1C000000
+#define BYTE_DONE 0x03FFC000
+#define RING_ADDR 0x00003FFF
+ uint32 locch2status2;
+#define BUFPTR_OFFSET 0x1FFF0000
+#define PCI_MASTER_STATE 0x000000C0
+#define LOC_MASTER_STATE 0x00000038
+#define CONTROL_STATE 0x00000007
+ uint32 unused7;
+
+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
+ uint32 locch1intstat;
+ uint32 locch1intmask;
+ uint32 unused8;
+ uint32 locch1descaddr;
+ uint32 locch1status1;
+ uint32 locch1status2;
+ uint32 unused9;
+
+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
+ uint32 pcich1intstat;
+ uint32 pcich1intmask;
+ uint32 pcich1descaddr;
+ uint32 pcich1status1;
+ uint32 pcich1status2;
+
+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
+ uint32 pcich2intstat;
+ uint32 pcich2intmask;
+ uint32 pcich2descaddr;
+ uint32 pcich2status1;
+ uint32 pcich2status2;
+
+ uint32 perm_id; /* permanent device and vendor id */
+ uint32 perm_rev; /* permanent revision id */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+/* PCI configuration address space start offset 0x40 */
+#define BRCM_PCI_CONFIG_TIMER 0x40
+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
+
+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
+
+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
+
+#endif
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+//**************************************************************************************
+// File Name : bcmTag.h
+//
+// Description: add tag with validation system to the firmware image file to be uploaded
+// via http
+//
+// Created : 02/28/2002 seanl
+//**************************************************************************************
+
+#ifndef _BCMTAG_H_
+#define _BCMTAG_H_
+
+
+#define BCM_SIG_1 "Broadcom Corporation"
+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
+
+#define BCM_TAG_VER "6"
+#define BCM_TAG_VER_LAST "26"
+
+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
+#define TAG_LEN 256
+#define TAG_VER_LEN 4
+#define SIG_LEN 20
+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
+#define CHIP_ID_LEN 6
+#define IMAGE_LEN 10
+#define ADDRESS_LEN 12
+#define FLAG_LEN 2
+#define TOKEN_LEN 20
+#define BOARD_ID_LEN 16
+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
+
+
+// TAG for downloadable image (kernel plus file system)
+typedef struct _FILE_TAG
+{
+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
+ unsigned char signiture_1[SIG_LEN]; // text line for company info
+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
+ unsigned char chipId[CHIP_ID_LEN]; // chip id
+ unsigned char boardId[BOARD_ID_LEN]; // board id
+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
+ unsigned char reserved[RESERVED_LEN]; // reserved for later use
+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
+ // now will be 4 unsigned char crc
+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
+} FILE_TAG, *PFILE_TAG;
+
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC_LEN 4
+
+// only included if for bcmTag.exe program
+#ifdef BCMTAG_EXE_USE
+
+static unsigned long Crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+#endif // BCMTAG_USE
+
+
+#endif // _BCMTAG_H_
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_INTR_H
+#define __BCM_INTR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(CONFIG_BCM96338)
+#include <6338_intr.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_intr.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_intr.h>
+#endif
+
+/* defines */
+struct pt_regs;
+typedef int (*FN_HANDLER) (int, void *);
+
+/* prototypes */
+extern void enable_brcm_irq(unsigned int irq);
+extern void disable_brcm_irq(unsigned int irq);
+extern int request_external_irq(unsigned int irq,
+ FN_HANDLER handler, unsigned long irqflags,
+ const char * devname, void *dev_id);
+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
+ unsigned int interruptId);
+extern void dump_intr_regs(void);
+
+/* compatibility definitions */
+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_MAP_PART_H
+#define __BCM_MAP_PART_H
+
+#if defined(CONFIG_BCM96338)
+#include <6338_map_part.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_map_part.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_map_part.h>
+#endif
+
+#endif
+
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
+//
+#ifndef BCMPCI_H
+#define BCMPCI_H
+
+/* Memory window in internal system bus address space */
+#define BCM_PCI_MEM_BASE 0x08000000
+/* IO window in internal system bus address space */
+#define BCM_PCI_IO_BASE 0x0C000000
+
+#define BCM_PCI_ADDR_MASK 0x1fffffff
+
+/* Memory window size (range) */
+#define BCM_PCI_MEM_SIZE_16MB 0x01000000
+/* IO window size (range) */
+#define BCM_PCI_IO_SIZE_64KB 0x00010000
+
+/* PCI Configuration and I/O space acesss */
+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
+
+/* fake USB PCI slot */
+#define USB_HOST_SLOT 9
+#define USB_BAR0_MEM_SIZE 0x0800
+
+#define BCM_HOST_MEM_SPACE1 0x10000000
+#define BCM_HOST_MEM_SPACE2 0x00000000
+
+/*
+ * EBI bus clock is 33MHz and share with PCI bus
+ * each clock cycle is 30ns.
+ */
+/* attribute memory access wait cnt for 4306 */
+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
+
+/* common memory access wait cnt for 4306 */
+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
+
+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
+#define PCCARD_VCC_33V 0x00010000
+#define PCCARD_VCC_50V 0x00020000
+
+typedef enum {
+ MPI_CARDTYPE_NONE, // No Card in slot
+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
+} CardType;
+
+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
+
+#define pcmciaAttrOffset 0x00200000
+#define pcmciaMemOffset 0x00000000
+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
+// Base Address is that mapped into the MPI ChipSelect registers.
+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
+#define pcmciaBase 0xbf000000
+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
+#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
+#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
+
+#endif
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmtypes.h - misc useful typedefs
+//
+#ifndef BCMTYPES_H
+#define BCMTYPES_H
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+
+#ifndef _TYPEDEFS_H_
+typedef unsigned char uint8;
+typedef unsigned short uint16;
+typedef unsigned long uint32;
+typedef signed char int8;
+typedef signed short int16;
+typedef signed long int32;
+#endif
+
+typedef unsigned char byte;
+// typedef unsigned long sem_t;
+
+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
+typedef signed long LONG,*PLONG;
+
+typedef unsigned int *PUINT;
+typedef signed int INT;
+
+typedef unsigned short *PUSHORT;
+typedef signed short SHORT,*PSHORT;
+typedef unsigned short WORD,*PWORD;
+
+typedef unsigned char *PUCHAR;
+typedef signed char *PCHAR;
+
+typedef void *PVOID;
+
+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
+
+typedef unsigned char BYTE,*PBYTE;
+
+//#ifndef __GNUC__
+//The following has been defined in Vxworks internally: vxTypesOld.h
+//redefine under vxworks will cause error
+typedef signed int *PINT;
+
+typedef signed char INT8;
+typedef signed short INT16;
+typedef signed long INT32;
+
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef unsigned long UINT32;
+
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned int UINT;
+typedef unsigned long ULONG;
+
+typedef void VOID;
+typedef unsigned char BOOL;
+
+//#endif /* __GNUC__ */
+
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+#ifndef TYPEDEFS_H
+
+// Maximum and minimum values for a signed 16 bit integer.
+#define MAX_INT16 32767
+#define MIN_INT16 -32768
+
+// Useful for true/false return values. This uses the
+// Taligent notation (k for constant).
+typedef enum
+{
+ kFalse = 0,
+ kTrue = 1
+} Bool;
+
+#endif
+
+/* macros to protect against unaligned accesses */
+
+#if 0
+/* first arg is an address, second is a value */
+#define PUT16( a, d ) { \
+ *((byte *)a) = (byte)((d)>>8); \
+ *(((byte *)a)+1) = (byte)(d); \
+}
+
+#define PUT32( a, d ) { \
+ *((byte *)a) = (byte)((d)>>24); \
+ *(((byte *)a)+1) = (byte)((d)>>16); \
+ *(((byte *)a)+2) = (byte)((d)>>8); \
+ *(((byte *)a)+3) = (byte)(d); \
+}
+
+/* first arg is an address, returns a value */
+#define GET16( a ) ( \
+ (*((byte *)a) << 8) | \
+ (*(((byte *)a)+1)) \
+)
+
+#define GET32( a ) ( \
+ (*((byte *)a) << 24) | \
+ (*(((byte *)a)+1) << 16) | \
+ (*(((byte *)a)+2) << 8) | \
+ (*(((byte *)a)+3)) \
+)
+#endif
+
+#ifndef YES
+#define YES 1
+#endif
+
+#ifndef NO
+#define NO 0
+#endif
+
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
+
+#endif
--- /dev/null
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/***********************************************************************/
+/* */
+/* MODULE: board.h */
+/* DATE: 97/02/18 */
+/* PURPOSE: Board specific information. This module should include */
+/* all base device addresses and board specific macros. */
+/* */
+/***********************************************************************/
+#ifndef _BOARD_H
+#define _BOARD_H
+
+/*****************************************************************************/
+/* Misc board definitions */
+/*****************************************************************************/
+
+#define DYING_GASP_API
+
+/*****************************************************************************/
+/* Physical Memory Map */
+/*****************************************************************************/
+
+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+#define FLASH45_BLKS_BOOT_ROM 1
+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define SDRAM_TYPE_ADDRESS_OFFSET 16
+#define NVRAM_DATA_OFFSET 0x0580
+#define NVRAM_DATA_ID 0x0f1e2d3c
+#define BOARD_SDRAM_TYPE *(unsigned long *) \
+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+
+// nvram and psi flash definitions for 45
+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
+
+/*****************************************************************************/
+/* NVRAM Offset and definition */
+/*****************************************************************************/
+
+#define NVRAM_VERSION_NUMBER 2
+#define NVRAM_VERSION_NUMBER_ADDRESS 0
+
+#define NVRAM_BOOTLINE_LEN 256
+#define NVRAM_BOARD_ID_STRING_LEN 16
+#define NVRAM_MAC_ADDRESS_LEN 6
+#define NVRAM_MAC_COUNT_MAX 32
+
+/*****************************************************************************/
+/* Misc Offsets */
+/*****************************************************************************/
+
+#define CFE_VERSION_OFFSET 0x0570
+#define CFE_VERSION_MARK_SIZE 5
+#define CFE_VERSION_SIZE 5
+
+typedef struct
+{
+ unsigned long ulVersion;
+ char szBootline[NVRAM_BOOTLINE_LEN];
+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
+ unsigned long ulReserved1[2];
+ unsigned long ulNumMacAddrs;
+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
+ char chReserved[2];
+ unsigned long ulCheckSum;
+} NVRAM_DATA, *PNVRAM_DATA;
+
+
+/*****************************************************************************/
+/* board ioctl calls for flash, led and some other utilities */
+/*****************************************************************************/
+
+
+/* Defines. for board driver */
+#define BOARD_IOCTL_MAGIC 'B'
+#define BOARD_DRV_MAJOR 206
+
+#define MAC_ADDRESS_ANY (unsigned long) -1
+
+#define BOARD_IOCTL_FLASH_INIT \
+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_WRITE \
+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_READ \
+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NR_PAGES \
+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_DUMP_ADDR \
+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MEMORY \
+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_MIPS_SOFT_RESET \
+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_LED_CTRL \
+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_PSI_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_SDRAM_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MONITOR_FD \
+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CHIP_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NUM_ENET \
+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CFE_VER \
+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ENET_CFG \
+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_SES_LED \
+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
+
+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
+#define RESET_BUTTON_UP 1
+#define RESET_BUTTON_PRESSDOWN 0
+#define BOARD_IOCTL_GET_RESETHOLD \
+ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
+//>>JUNHON, 2004/09/15
+
+// for the action in BOARD_IOCTL_PARMS for flash operation
+typedef enum
+{
+ PERSISTENT,
+ NVRAM,
+ BCM_IMAGE_CFE,
+ BCM_IMAGE_FS,
+ BCM_IMAGE_KERNEL,
+ BCM_IMAGE_WHOLE,
+ SCRATCH_PAD,
+ FLASH_SIZE,
+} BOARD_IOCTL_ACTION;
+
+
+typedef struct boardIoctParms
+{
+ char *string;
+ char *buf;
+ int strLen;
+ int offset;
+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
+ int result;
+} BOARD_IOCTL_PARMS;
+
+
+// LED defines
+typedef enum
+{
+ kLedAdsl,
+ kLedWireless,
+ kLedUsb,
+ kLedHpna,
+ kLedWanData,
+ kLedPPP,
+ kLedVoip,
+ kLedSes,
+ kLedLan,
+ kLedSelfTest,
+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
+} BOARD_LED_NAME;
+
+typedef enum
+{
+ kLedStateOff, /* turn led off */
+ kLedStateOn, /* turn led on */
+ kLedStateFail, /* turn led on red */
+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
+} BOARD_LED_STATE;
+
+
+// virtual and physical map pair defined in board.c
+typedef struct ledmappair
+{
+ BOARD_LED_NAME ledName; // virtual led name
+ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
+ unsigned short ledMask; // physical GPIO pin mask
+ unsigned short ledActiveLow; // reset bit to turn on LED
+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
+ unsigned short ledActiveLowFail;// reset bit to turn on LED
+} LED_MAP_PAIR, *PLED_MAP_PAIR;
+
+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
+
+/* Flash storage address information that is determined by the flash driver. */
+typedef struct flashaddrinfo
+{
+ int flash_persistent_start_blk;
+ int flash_persistent_number_blk;
+ int flash_persistent_length;
+ unsigned long flash_persistent_blk_offset;
+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
+ int flash_scratch_pad_number_blk;
+ int flash_scratch_pad_length;
+ unsigned long flash_scratch_pad_blk_offset;
+ int flash_nvram_start_blk;
+ int flash_nvram_number_blk;
+ int flash_nvram_length;
+ unsigned long flash_nvram_blk_offset;
+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
+
+// scratch pad defines
+/* SP - Persisten Scratch Pad format:
+ sp header : 32 bytes
+ tokenId-1 : 8 bytes
+ tokenId-1 len : 4 bytes
+ tokenId-1 data
+ ....
+ tokenId-n : 8 bytes
+ tokenId-n len : 4 bytes
+ tokenId-n data
+*/
+
+#define MAGIC_NUM_LEN 8
+#define MAGIC_NUMBER "gOGoBrCm"
+#define TOKEN_NAME_LEN 16
+#define SP_VERSION 1
+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
+#define SP_RESERVERD 16
+
+typedef struct _SP_HEADER
+{
+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
+ int SPVersion; // version number
+ int SPUsedLen; // used sp len
+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
+} SP_HEADER, *PSP_HEADER;
+
+typedef struct _TOKEN_DEF
+{
+ char tokenName[TOKEN_NAME_LEN];
+ int tokenLen;
+} SP_TOKEN, *PSP_TOKEN;
+
+
+/*****************************************************************************/
+/* Function Prototypes */
+/*****************************************************************************/
+#if !defined(__ASM_ASM_H)
+void dumpaddr( unsigned char *pAddr, int nLen );
+
+int kerSysNvRamGet(char *string, int strLen, int offset);
+int kerSysNvRamSet(char *string, int strLen, int offset);
+int kerSysPersistentGet(char *string, int strLen, int offset);
+int kerSysPersistentSet(char *string, int strLen, int offset);
+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
+int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
+int kerSysReleaseMacAddress( unsigned char *pucaAddr );
+int kerSysGetSdramSize( void );
+void kerSysGetBootline(char *string, int strLen);
+void kerSysSetBootline(char *string, int strLen);
+void kerSysMipsSoftReset(void);
+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
+int kerSysFlashSizeGet(void);
+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
+void kerSysDeregisterDyingGaspHandler(char *devname);
+void kerSysWakeupMonitorTask( void );
+#endif
+
+#define BOOT_CFE 0
+#define BOOT_REDBOOT 1
+
+extern int boot_loader_type;
+
+#endif /* _BOARD_H */
+
--- /dev/null
+#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
+
+#define BOOT_LOADER_UNKNOWN 0
+#define BOOT_LOADER_CFE 1
+#define BOOT_LOADER_REDBOOT 2
+#define BOOT_LOADER_LAST 2
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE)
+define trxalign/jffs2-128k
+-a 0x20000
+endef
+define trxalign/jffs2-64k
+-a 0x10000
+endef
+define trxalign/squashfs
+-a 1024
+endef
+
define Build/Clean
- $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
+ $(MAKE) -C lzma-loader clean
endef
define Image/Prepare
cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
- $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+ rm -f $(KDIR)/loader.gz
+ $(MAKE) -C lzma-loader \
+ BUILD_DIR="$(KDIR)" \
+ TARGET="$(KDIR)" \
+ clean install
+ echo -ne "\\x00" >> $(KDIR)/loader.gz
endef
define Image/Build
- cp $(KDIR)/vmlinux $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+ $(STAGING_DIR)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
endef
$(eval $(call BuildImage))
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+ $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+ LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+ $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
--- /dev/null
+/*
+ LzmaDecode.c
+ LZMA Decoder
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+ Byte *Buffer;
+ Byte *BufferLim;
+ UInt32 Range;
+ UInt32 Code;
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *InCallback;
+ int Result;
+ #endif
+ int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+ if (rd->Buffer == rd->BufferLim)
+ {
+ #ifdef _LZMA_IN_CB
+ UInt32 size;
+ rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+ rd->BufferLim = rd->Buffer + size;
+ if (size == 0)
+ #endif
+ {
+ rd->ExtraBytes = 1;
+ return 0xFF;
+ }
+ }
+ return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ Byte *stream, UInt32 bufferSize
+ #endif
+ )
+{
+ int i;
+ #ifdef _LZMA_IN_CB
+ rd->InCallback = inCallback;
+ rd->Buffer = rd->BufferLim = 0;
+ #else
+ rd->Buffer = stream;
+ rd->BufferLim = stream + bufferSize;
+ #endif
+ rd->ExtraBytes = 0;
+ rd->Code = 0;
+ rd->Range = (0xFFFFFFFF);
+ for(i = 0; i < 5; i++)
+ rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+ RC_INIT_VAR
+ UInt32 result = 0;
+ int i;
+ for (i = numTotalBits; i > 0; i--)
+ {
+ /* UInt32 t; */
+ range >>= 1;
+
+ result <<= 1;
+ if (code >= range)
+ {
+ code -= range;
+ result |= 1;
+ }
+ /*
+ t = (code - range) >> 31;
+ t &= 1;
+ code -= range & (t - 1);
+ result = (result + result) | (1 - t);
+ */
+ RC_NORMALIZE
+ }
+ RC_FLUSH_VAR
+ return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+ UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+ if (rd->Code < bound)
+ {
+ rd->Range = bound;
+ *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 0;
+ }
+ else
+ {
+ rd->Range -= bound;
+ rd->Code -= bound;
+ *prob -= (*prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 1;
+ }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+ UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+ if (code < bound) \
+ { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+ else \
+ { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+ RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = numLevels; i > 0; i--)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT(prob, mi)
+ #else
+ mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ int symbol = 0;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = 0; i < numLevels; i++)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+ #else
+ int bit = RangeDecoderBitDecode(probs + mi, rd);
+ mi = mi + mi + bit;
+ symbol |= (bit << i);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ int bit;
+ int matchBit = (matchByte >> 7) & 1;
+ matchByte <<= 1;
+ #ifdef _LZMA_LOC_OPT
+ {
+ CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+ RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+ }
+ #else
+ bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+ symbol = (symbol << 1) | bit;
+ #endif
+ if (matchBit != bit)
+ {
+ while (symbol < 0x100)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ break;
+ }
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+ if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+ return RangeDecoderBitTreeDecode(p + LenLow +
+ (posState << kLenNumLowBits), kLenNumLowBits, rd);
+ if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+ return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+ (posState << kLenNumMidBits), kLenNumMidBits, rd);
+ return kLenNumLowSymbols + kLenNumMidSymbols +
+ RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+ CRangeDecoder RangeDecoder;
+ Byte *Dictionary;
+ UInt32 DictionarySize;
+ UInt32 DictionaryPos;
+ UInt32 GlobalPos;
+ UInt32 Reps[4];
+ int lc;
+ int lp;
+ int pb;
+ int State;
+ int PreviousIsMatch;
+ int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+ )
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ UInt32 i;
+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ vs->Dictionary = dictionary;
+ vs->DictionarySize = dictionarySize;
+ vs->DictionaryPos = 0;
+ vs->GlobalPos = 0;
+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+ vs->lc = lc;
+ vs->lp = lp;
+ vs->pb = pb;
+ vs->State = 0;
+ vs->PreviousIsMatch = 0;
+ vs->RemainLen = 0;
+ dictionary[dictionarySize - 1] = 0;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&vs->RangeDecoder,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+ return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer,
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ CRangeDecoder rd = vs->RangeDecoder;
+ int state = vs->State;
+ int previousIsMatch = vs->PreviousIsMatch;
+ Byte previousByte;
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << (vs->pb)) - 1;
+ UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+ int lc = vs->lc;
+ int len = vs->RemainLen;
+ UInt32 globalPos = vs->GlobalPos;
+
+ Byte *dictionary = vs->Dictionary;
+ UInt32 dictionarySize = vs->DictionarySize;
+ UInt32 dictionaryPos = vs->DictionaryPos;
+
+ if (len == -1)
+ {
+ *outSizeProcessed = 0;
+ return LZMA_RESULT_OK;
+ }
+
+ while(len > 0 && nowPos < outSize)
+ {
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ len--;
+ }
+ if (dictionaryPos == 0)
+ previousByte = dictionary[dictionarySize - 1];
+ else
+ previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+ Byte *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ CProb *p = (CProb *)buffer;
+ CRangeDecoder rd;
+ UInt32 i;
+ int state = 0;
+ int previousIsMatch = 0;
+ Byte previousByte = 0;
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << pb) - 1;
+ UInt32 literalPosMask = (1 << lp) - 1;
+ int len = 0;
+ if (bufferSize < numProbs * sizeof(CProb))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&rd,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+#endif
+
+ *outSizeProcessed = 0;
+ while(nowPos < outSize)
+ {
+ int posState = (int)(
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & posStateMask);
+ #ifdef _LZMA_IN_CB
+ if (rd.Result != LZMA_RESULT_OK)
+ return rd.Result;
+ #endif
+ if (rd.ExtraBytes != 0)
+ return LZMA_RESULT_DATA_ERROR;
+ if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ CProb *probs = p + Literal + (LZMA_LIT_SIZE *
+ (((
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+ if (state < 4) state = 0;
+ else if (state < 10) state -= 3;
+ else state -= 6;
+ if (previousIsMatch)
+ {
+ Byte matchByte;
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ matchByte = dictionary[pos];
+ #else
+ matchByte = outStream[nowPos - rep0];
+ #endif
+ previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+ previousIsMatch = 0;
+ }
+ else
+ previousByte = LzmaLiteralDecode(probs, &rd);
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #endif
+ }
+ else
+ {
+ previousIsMatch = 1;
+ if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+ {
+ if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+ {
+ if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos;
+ #endif
+ if (
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ == 0)
+ return LZMA_RESULT_DATA_ERROR;
+ state = state < 7 ? 9 : 11;
+ #ifdef _LZMA_OUT_READ
+ pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ continue;
+ }
+ }
+ else
+ {
+ UInt32 distance;
+ if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+ distance = rep1;
+ else
+ {
+ if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+ distance = rep2;
+ else
+ {
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+ state = state < 7 ? 8 : 11;
+ }
+ else
+ {
+ int posSlot;
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ state = state < 7 ? 7 : 10;
+ len = LzmaLenDecode(p + LenCoder, &rd, posState);
+ posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits), kNumPosSlotBits, &rd);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+ rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+ if (posSlot < kEndPosModelIndex)
+ {
+ rep0 += RangeDecoderReverseBitTreeDecode(
+ p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+ }
+ else
+ {
+ rep0 += RangeDecoderDecodeDirectBits(&rd,
+ numDirectBits - kNumAlignBits) << kNumAlignBits;
+ rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+ }
+ }
+ else
+ rep0 = posSlot;
+ rep0++;
+ }
+ if (rep0 == (UInt32)(0))
+ {
+ /* it's for stream version */
+ len = -1;
+ break;
+ }
+ if (rep0 > nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ {
+ return LZMA_RESULT_DATA_ERROR;
+ }
+ len += kMatchMinLen;
+ do
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ len--;
+ }
+ while(len > 0 && nowPos < outSize);
+ }
+ }
+
+ #ifdef _LZMA_OUT_READ
+ vs->RangeDecoder = rd;
+ vs->DictionaryPos = dictionaryPos;
+ vs->GlobalPos = globalPos + nowPos;
+ vs->Reps[0] = rep0;
+ vs->Reps[1] = rep1;
+ vs->Reps[2] = rep2;
+ vs->Reps[3] = rep3;
+ vs->State = state;
+ vs->PreviousIsMatch = previousIsMatch;
+ vs->RemainLen = len;
+ #endif
+
+ *outSizeProcessed = nowPos;
+ return LZMA_RESULT_OK;
+}
--- /dev/null
+/*
+ LzmaDecode.h
+ LZMA Decoder interface
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+ but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/*
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short,
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+);
+#endif
+
+int LzmaDecode(
+ unsigned char *buffer,
+ #ifndef _LZMA_OUT_READ
+ UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed);
+
+#endif
--- /dev/null
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
+# Modified to support bzip'd kernels.
+# Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
+# Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START := 0x80001000
+BZ_TEXT_START := 0x80300000
+
+OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+ -ffunction-sections -pipe -mlong-calls -fno-common \
+ -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS := head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+ gzip -nc9 $< > $@
+
+loader.elf: loader.o
+ cp $< $@
+
+loader: loader.o
+ $(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+ $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+ $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+ @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+ $(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+ $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+ rm -f loader.gz loader decompress *.lds *.o *.image
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions:
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+ /* Try looking at TRX header for rootfs offset */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+ bcm947xx_parts[1].offset = off;
+- if (le32_to_cpu(trx->offsets[1]) > off)
++ if (le32_to_cpu(trx->offsets[2]) > off)
++ off = le32_to_cpu(trx->offsets[2]);
++ else if (le32_to_cpu(trx->offsets[1]) > off)
+ off = le32_to_cpu(trx->offsets[1]);
+ continue;
+ }
+
+
+Revision history:
+ 0.02 Initial release
+ 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+ output size to decoder (stream mode compressed input is not
+ a requirement anymore)
+ 0.04 Reordered functions using lds script
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
+ * pass actual output size to decoder (stream mode
+ * compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ * reordered functions using lds script, removed forward decl
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH 0x1fc00000 /* Flash */
+
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+
+#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+#define cache_unroll(base,op) \
+ __asm__ __volatile__( \
+ ".set noreorder;\n" \
+ ".set mips3;\n" \
+ "cache %1, (%0);\n" \
+ ".set mips0;\n" \
+ ".set reorder\n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Invalidate_I);
+ start += lsize;
+ }
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Writeback_Inv_D);
+ start += lsize;
+ }
+}
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+
+struct trx_header {
+ unsigned int magic; /* "HDR0" */
+ unsigned int len; /* Length of file including header */
+ unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
+ unsigned int flag_version; /* 0:15 flags, 16:31 version */
+ unsigned int offsets[3]; /* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+ static unsigned int val;
+
+ if (((unsigned int)offset % 4) == 0) {
+ val = *(unsigned int *)data;
+ data += 4;
+ }
+
+ *bufferSize = 1;
+ *buffer = ((unsigned char *)&val) + (offset++ & 3);
+
+ return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+ unsigned char *buffer;
+ UInt32 fake;
+
+ return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize,
+ unsigned long dcache_size, unsigned long dcache_lsize)
+{
+ unsigned int i; /* temp value */
+ unsigned int lc; /* literal context bits */
+ unsigned int lp; /* literal pos state bits */
+ unsigned int pb; /* pos state bits */
+ unsigned int osize; /* uncompressed size */
+
+ ILzmaInCallback callback;
+ callback.Read = read_byte;
+
+ /* look for trx header, 32-bit data access */
+ for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+ ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+ /* compressed kernel is in the partition 0 or 1 */
+ if (((struct trx_header *)data)->offsets[1] > 65536)
+ data += ((struct trx_header *)data)->offsets[0];
+ else
+ data += ((struct trx_header *)data)->offsets[1];
+
+ offset = 0;
+
+ /* lzma args */
+ i = get_byte();
+ lc = i % 9, i = i / 9;
+ lp = i % 5, pb = i / 5;
+
+ /* skip rest of the LZMA coder property */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* read the lower half of uncompressed size in the header */
+ osize = ((unsigned int)get_byte()) +
+ ((unsigned int)get_byte() << 8) +
+ ((unsigned int)get_byte() << 16) +
+ ((unsigned int)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* decompress kernel */
+ if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+ (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+ {
+ blast_dcache(dcache_size, dcache_lsize);
+ blast_icache(icache_size, icache_lsize);
+
+ /* Jump to load address */
+ ((void (*)(void)) LOADADDR)();
+ }
+}
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+ . = BZ_TEXT_START;
+ .text : {
+ *(.text.entry)
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+
+ workspace = .;
+}
--- /dev/null
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
+/* cache manipulation adapted from Broadcom code */
+/* idea taken from original bunzip2 decompressor code */
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0 0x80000000
+
+#define C0_CONFIG $16
+#define C0_TAGLO $28
+#define C0_TAGHI $29
+
+#define CONF1_DA_SHIFT 7 /* D$ associativity */
+#define CONF1_DA_MASK 0x00000380
+#define CONF1_DA_BASE 1
+#define CONF1_DL_SHIFT 10 /* D$ line size */
+#define CONF1_DL_MASK 0x00001c00
+#define CONF1_DL_BASE 2
+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
+#define CONF1_DS_MASK 0x0000e000
+#define CONF1_DS_BASE 64
+#define CONF1_IA_SHIFT 16 /* I$ associativity */
+#define CONF1_IA_MASK 0x00070000
+#define CONF1_IA_BASE 1
+#define CONF1_IL_SHIFT 19 /* I$ line size */
+#define CONF1_IL_MASK 0x00380000
+#define CONF1_IL_BASE 2
+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
+#define CONF1_IS_MASK 0x01c00000
+#define CONF1_IS_BASE 64
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+ .text
+ LEAF(startup)
+ .set noreorder
+
+ /* Copy decompressor code to the right place */
+ li t2, BZ_TEXT_START
+ add a0, t2, 0
+ la a1, code_start
+ la a2, code_stop
+$L1:
+ lw t0, 0(a1)
+ sw t0, 0(a0)
+ add a1, 4
+ add a0, 4
+ blt a1, a2, $L1
+ nop
+
+ /* At this point we need to invalidate dcache and */
+ /* icache before jumping to new code */
+
+1: /* Get cache sizes */
+ .set mips32
+ mfc0 s0,C0_CONFIG,1
+ .set mips0
+
+ li s1,CONF1_DL_MASK
+ and s1,s0
+ beq s1,zero,nodc
+ nop
+
+ srl s1,CONF1_DL_SHIFT
+ li t0,CONF1_DL_BASE
+ sll s1,t0,s1 /* s1 has D$ cache line size */
+
+ li s2,CONF1_DA_MASK
+ and s2,s0
+ srl s2,CONF1_DA_SHIFT
+ addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
+
+ li t0,CONF1_DS_MASK
+ and t0,s0
+ srl t0,CONF1_DS_SHIFT
+ li s3,CONF1_DS_BASE
+ sll s3,s3,t0 /* s3 has D$ sets per way */
+
+ multu s2,s3 /* sets/way * associativity */
+ mflo t0 /* total cache lines */
+
+ multu s1,t0 /* D$ linesize * lines */
+ mflo s2 /* s2 is now D$ size in bytes */
+
+ /* Initilize the D$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s2 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Writeback_Inv_D,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s1
+
+nodc:
+ /* Now we get to do it all again for the I$ */
+
+ move s3,zero /* just in case there is no icache */
+ move s4,zero
+
+ li t0,CONF1_IL_MASK
+ and t0,s0
+ beq t0,zero,noic
+ nop
+
+ srl t0,CONF1_IL_SHIFT
+ li s3,CONF1_IL_BASE
+ sll s3,t0 /* s3 has I$ cache line size */
+
+ li t0,CONF1_IA_MASK
+ and t0,s0
+ srl t0,CONF1_IA_SHIFT
+ addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
+
+ li t0,CONF1_IS_MASK
+ and t0,s0
+ srl t0,CONF1_IS_SHIFT
+ li s5,CONF1_IS_BASE
+ sll s5,t0 /* s5 has I$ sets per way */
+
+ multu s4,s5 /* sets/way * associativity */
+ mflo t0 /* s4 is now total cache lines */
+
+ multu s3,t0 /* I$ linesize * lines */
+ mflo s4 /* s4 is cache size in bytes */
+
+ /* Initilize the I$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s4 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Invalidate_I,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s3
+
+noic:
+ move a0,s3 /* icache line size */
+ move a1,s4 /* icache size */
+ move a2,s1 /* dcache line size */
+ jal t2
+ move a3,s2 /* dcache size */
+
+ .set reorder
+ END(startup)
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+ . = TEXT_START;
+ .text : {
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+}
diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig
--- linux-2.6.19/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/Kconfig 2006-12-16 18:46:31.000000000 +0100
-@@ -12,6 +12,15 @@
+@@ -4,6 +4,10 @@
+ # Horrible source of confusion. Die, die, die ...
+ select EMBEDDED
+
++config CFE
++ bool
++ # Common Firmware Environment
++
+ mainmenu "Linux/MIPS Kernel Configuration"
+
+ menu "Machine selection"
+@@ -12,6 +12,18 @@
prompt "System type"
default SGI_IP22
+config BCM963XX
-+ bool "Support for the Broadcom boards"
++ bool "Support for Broadcom BCM963xx SoC"
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_CPU_MIPS32_R1
++ select HW_HAS_PCI
++ select DMA_NONCOHERENT
+ select IRQ_CPU
++ select CFE
+ help
+ This is a fmaily of boards based on the Broadcom MIPS32
+
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
-@@ -766,6 +775,7 @@
-
- endchoice
-
-+source "arch/mips/bcm963xx/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile
--- linux-2.6.19/arch/mips/Makefile 2006-12-16 17:36:29.000000000 +0100
+++ linux-2.6.19.new/arch/mips/Makefile 2006-12-16 18:46:31.000000000 +0100
-@@ -158,6 +158,15 @@
+@@ -158,6 +158,19 @@
#
#
-+# Broadcom board
++# Broadcom BCM963xx SoC
+#
+core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/
+cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx
-+cflags-$(CONFIG_BCM963XX) += -Iarch/mips/bcm963xx/include
+load-$(CONFIG_BCM963XX) += 0xffffffff80010000
+
+
++#
++# Common Firmware Environment
++#
++core-$(CONFIG_CFE) += arch/mips/cfe/
++
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
+ {
-+ printk("brcm mips: enabling icache and dcache...\n");
++ printk("bcm963xx: enabling icache and dcache...\n");
+ /* Enable caches */
+ write_c0_diag(read_c0_diag() | 0xC0000000);
+ }
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
-+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
++obj-$(CONFIG_BCM963XX) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
#
# These are still pretty much in the old state, watch, go blind.
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
++obj-$(CONFIG_BCM963XX) += bcm63xx_cons.o
diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h
--- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100
projects / openwrt / staging / yousong.git / commitdiff