From: Milan Krstic Date: Fri, 29 Sep 2023 15:26:47 +0000 (+0000) Subject: ramips: add support for ZyXEL LTE5398-M904 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=17465fc77ec0dbe40310548ee16352b09e2712aa;p=openwrt%2Fstaging%2Fwigyori.git ramips: add support for ZyXEL LTE5398-M904 ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS port. Specifications: * SoC: Mediatek MT7621AT * RAM: 256 MB * Flash: 128MB NAND (MX30LF1G18AC) * WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G * Switch: 2 GbE ports MT7530 * LTE/3G: Quectel EG18-EA LTE-A Cat. 18 * SIM: 1 micro-SIM card slot * Buttons: Reset, WPS * LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G) * VoIP: 1 FXS RJ11 port * Power: 12V, 2A UART serial console: 57600,8N1 Unpopulated header J5: [o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc Installation: * Log in as root using ssh to 192.168.1.1 * scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/ * Prepare bootloader config by running: nvram setro uboot DebugFlag 0x1 nvram setro uboot CheckBypass 0 nvram commit * Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot * Wait for OpenWrt to boot and ssh to root@192.168.1.1 * Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image For mode details about flashing see: 2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19) Unsupported: * FXS/Voice Signed-off-by: Milan Krstic --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index a04c0616e5..49d6c9d67f 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -127,6 +127,7 @@ xiaomi,redmi-router-ac2100) zyxel,lte3301-plus) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x80000" ;; +zyxel,lte5398-m904|\ zyxel,nr7101) idx="$(find_mtd_index Config)" [ -n "$idx" ] && \ diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts new file mode 100644 index 0000000000..d6f00d9edc --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "zyxel,lte5398-m904", "mediatek,mt7621-soc"; + model = "ZyXEL LTE5398-M904"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + power_blue { + label = "blue:power"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbport"; + trigger-sources = <&ehci_port2>; + }; + + internet { + label = "green:internet"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "green:wifi"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + voice { + label = "green:voice"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + }; + + lte_green { + label = "green:lte"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + lte_orange { + label = "orange:lte"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + lte_red { + label = "red:lte"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + lte_power { + gpio-export,name = "lte_power"; + gpio-export,output = <0>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + + usb_power { + gpio-export,name = "usb_power"; + gpio-export,output = <1>; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x80000>; + }; + + factory: partition@100000 { + compatible = "nvmem-cells"; + label = "Factory"; + reg = <0x100000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + + macaddr_factory_fe6e: macaddr@fe6e { + reg = <0xfe6e 0x6>; + }; + }; + + partition@140000 { + label = "Kernel"; + reg = <0x140000 0x1ec0000>; + }; + + partition@540000 { + label = "ubi"; + reg = <0x540000 0x1ac0000>; + }; + + partition@2140000 { + label = "Kernel2"; + reg = <0x2140000 0x1ec0000>; + }; + + partition@4000000 { + label = "wwan"; + reg = <0x4000000 0x100000>; + }; + + partition@4100000 { + label = "data"; + reg = <0x4100000 0x1000000>; + }; + + partition@5100000 { + label = "rom-d"; + reg = <0x5100000 0x100000>; + read-only; + }; + + partition@5200000 { + label = "reserve"; + reg = <0x5200000 0x80000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&state_default { + gpio { + groups = "i2c", "rgmii2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_fe6e>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + port@2 { + status = "okay"; + label = "lan2"; + }; + }; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index dc9e5515a7..65510fccf1 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2974,6 +2974,21 @@ define Device/zyxel_lte3301-plus endef TARGET_DEVICES += zyxel_lte3301-plus +define Device/zyxel_lte5398-m904 + $(Device/nand) + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := LTE5398-M904 + KERNEL_SIZE := 31488k + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \ + kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb-ledtrig-usbport + KERNEL := $(KERNEL_DTB) | uImage lzma | \ + zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION) + KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \ + zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery + KERNEL_INITRAMFS_SUFFIX := -recovery.bin +endef +TARGET_DEVICES += zyxel_lte5398-m904 + define Device/zyxel_nr7101 $(Device/nand) DEVICE_VENDOR := ZyXEL diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index d4dfdf39e2..d50e58131d 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -248,6 +248,9 @@ yuncore,ax820) zyxel,lte3301-plus) ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0" ;; +zyxel,lte5398-m904) + ucidef_set_led_netdev "internet" "LTE/3G Internet Activity" "green:internet" "wwan0" "rx tx" + ;; esac board_config_flush diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index b4c2c6dd68..2fa70a213d 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -148,6 +148,10 @@ ramips_setup_interfaces() ubnt,usw-flex) ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5" ;; + zyxel,lte5398-m904) + ucidef_set_interface_lan "lan1 lan2" + ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi" + ;; zyxel,wap6805) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index aebb416371..22cf272429 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -29,7 +29,8 @@ ubnt,edgerouter-x-sfp) ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403" ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404" ;; -zyxel,lte3301-plus) +zyxel,lte3301-plus|\ +zyxel,lte5398-m904) ucidef_add_gpio_switch "usb_power" "Power USB Port" "usb_power" "1" ucidef_add_gpio_switch "lte_power" "Power LTE modem" "lte_power" "1" ;; diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount index 9db700bff5..c558247341 100755 --- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount @@ -34,6 +34,7 @@ boot() { [ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1 [ $(printf %d $(fw_printenv -n Image1Try)) -gt 0 ] && fw_setenv Image1Try 0 ;; + zyxel,lte5398-m904|\ zyxel,nr7101) [ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 0x1 [ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1 diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 203872394b..777c87bed8 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -149,6 +149,7 @@ platform_do_upgrade() { platform_upgrade_ubnt_erx "$1" ;; zyxel,lte3301-plus|\ + zyxel,lte5398-m904|\ zyxel,nr7101) fw_setenv CheckBypass 0 fw_setenv Image1Stable 0