From: Rui Salvaterra Date: Mon, 22 Feb 2021 17:37:12 +0000 (+0000) Subject: mvebu: fix the patch numbering X-Git-Tag: v22.03.0-rc1~3384 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=23ebb2e9c3b843dc7eaa3ddae4faee7f8ba00aef;p=openwrt%2Fopenwrt.git mvebu: fix the patch numbering Make each logical patch group numbering contiguous. Reviewed-by: Tomasz Maciej Nowak Tested-by: Tomasz Maciej Nowak Signed-off-by: Rui Salvaterra [add kernel version to backport] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch new file mode 100644 index 0000000000..c3abae60a6 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch @@ -0,0 +1,65 @@ +From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak +Date: Tue, 10 Nov 2020 16:38:31 +0100 +Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED + +With board revision 1.3, SolidRun moved the power LED to the middle of +the board. In old place of power LED a GPIO controllable heartbeat LED +was added. This commit only touches Single Shot variant, since only this +variant is all revision 1.3. + +Note: +This is slightly modified patch. Some boards could be placed in an +enclosure, so the LED18 is enabled by default, since that'll be the only +visible indicator that the board is operating. + +Reported-by: Alexandra Alth +Signed-off-by: Tomasz Maciej Nowak +Signed-off-by: Gregory CLEMENT +--- + .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts ++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts +@@ -5,6 +5,8 @@ + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + ++#include ++ + #include "armada-8040-mcbin.dtsi" + + / { +@@ -12,6 +14,20 @@ + compatible = "marvell,armada8040-mcbin-singleshot", + "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = <&cp0_led18_pins>; ++ pinctrl-names = "default"; ++ ++ led18 { ++ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; ++ function = LED_FUNCTION_HEARTBEAT; ++ color = ; ++ linux,default-trigger = "heartbeat"; ++ default-state = "on"; ++ }; ++ }; + }; + + &cp0_eth0 { +@@ -27,3 +43,10 @@ + managed = "in-band-status"; + sfp = <&sfp_eth1>; + }; ++ ++&cp0_pinctrl { ++ cp0_led18_pins: led18-pins { ++ marvell,pins = "mpp33"; ++ marvell,function = "gpio"; ++ }; ++}; diff --git a/target/linux/mvebu/patches-5.10/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.10/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch deleted file mode 100644 index c3abae60a6..0000000000 --- a/target/linux/mvebu/patches-5.10/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch +++ /dev/null @@ -1,65 +0,0 @@ -From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak -Date: Tue, 10 Nov 2020 16:38:31 +0100 -Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED - -With board revision 1.3, SolidRun moved the power LED to the middle of -the board. In old place of power LED a GPIO controllable heartbeat LED -was added. This commit only touches Single Shot variant, since only this -variant is all revision 1.3. - -Note: -This is slightly modified patch. Some boards could be placed in an -enclosure, so the LED18 is enabled by default, since that'll be the only -visible indicator that the board is operating. - -Reported-by: Alexandra Alth -Signed-off-by: Tomasz Maciej Nowak -Signed-off-by: Gregory CLEMENT ---- - .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -@@ -5,6 +5,8 @@ - * Device Tree file for MACCHIATOBin Armada 8040 community board platform - */ - -+#include -+ - #include "armada-8040-mcbin.dtsi" - - / { -@@ -12,6 +14,20 @@ - compatible = "marvell,armada8040-mcbin-singleshot", - "marvell,armada8040-mcbin", "marvell,armada8040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&cp0_led18_pins>; -+ pinctrl-names = "default"; -+ -+ led18 { -+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; -+ function = LED_FUNCTION_HEARTBEAT; -+ color = ; -+ linux,default-trigger = "heartbeat"; -+ default-state = "on"; -+ }; -+ }; - }; - - &cp0_eth0 { -@@ -27,3 +43,10 @@ - managed = "in-band-status"; - sfp = <&sfp_eth1>; - }; -+ -+&cp0_pinctrl { -+ cp0_led18_pins: led18-pins { -+ marvell,pins = "mpp33"; -+ marvell,function = "gpio"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-5.10/312-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.10/312-helios4-dts-status-led-alias.patch deleted file mode 100644 index 4c4fbec764..0000000000 --- a/target/linux/mvebu/patches-5.10/312-helios4-dts-status-led-alias.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-helios4.dts -+++ b/arch/arm/boot/dts/armada-388-helios4.dts -@@ -15,6 +15,13 @@ - model = "Helios4"; - compatible = "kobol,helios4", "marvell,armada388", - "marvell,armada385", "marvell,armada380"; -+ -+ aliases { -+ led-boot = &led_status; -+ led-failsafe = &led_status; -+ led-running = &led_status; -+ led-upgrade = &led_status; -+ }; - - memory { - device_type = "memory"; -@@ -70,10 +77,9 @@ - - system-leds { - compatible = "gpio-leds"; -- status-led { -+ led_status: status-led { - label = "helios4:green:status"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - diff --git a/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch new file mode 100644 index 0000000000..4c4fbec764 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/313-helios4-dts-status-led-alias.patch @@ -0,0 +1,28 @@ +--- a/arch/arm/boot/dts/armada-388-helios4.dts ++++ b/arch/arm/boot/dts/armada-388-helios4.dts +@@ -15,6 +15,13 @@ + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; ++ ++ aliases { ++ led-boot = &led_status; ++ led-failsafe = &led_status; ++ led-running = &led_status; ++ led-upgrade = &led_status; ++ }; + + memory { + device_type = "memory"; +@@ -70,10 +77,9 @@ + + system-leds { + compatible = "gpio-leds"; +- status-led { ++ led_status: status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + diff --git a/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch new file mode 100644 index 0000000000..2240d0b39e --- /dev/null +++ b/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch @@ -0,0 +1,34 @@ +Certain SFP modules (most notably Nokia GPON ones) first check +connectivity on 1000base-x, and switch to 2500base-x afterwards. This +is considered a quirk so the phylink switches the interface to +2500base-x as well. + +However, after power-cycling the uDPU device, network interface/SFP module +will not work correctly until the module is re-seated. This patch +resolves this issue by forcing the interface to be brought up in +2500base-x mode by default. + +Signed-off-by: Jakov Petrina +Signed-off-by: Vladimir Vid +Cc: Luka Perkov + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -162,7 +162,7 @@ + }; + + ð0 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +@@ -170,7 +170,7 @@ + }; + + ð1 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; diff --git a/target/linux/mvebu/patches-5.10/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.10/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch deleted file mode 100644 index 2240d0b39e..0000000000 --- a/target/linux/mvebu/patches-5.10/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch +++ /dev/null @@ -1,34 +0,0 @@ -Certain SFP modules (most notably Nokia GPON ones) first check -connectivity on 1000base-x, and switch to 2500base-x afterwards. This -is considered a quirk so the phylink switches the interface to -2500base-x as well. - -However, after power-cycling the uDPU device, network interface/SFP module -will not work correctly until the module is re-seated. This patch -resolves this issue by forcing the interface to be brought up in -2500base-x mode by default. - -Signed-off-by: Jakov Petrina -Signed-off-by: Vladimir Vid -Cc: Luka Perkov - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -162,7 +162,7 @@ - }; - - ð0 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; -@@ -170,7 +170,7 @@ - }; - - ð1 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>;