From: John Crispin <john@openwrt.org>
Date: Mon, 18 Aug 2014 13:09:14 +0000 (+0000)
Subject: ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=2c6768219221954c731b14f43f57840a96002a03;hp=b796ff6ef37d4a1498cd416a7f02e392e295dc77;p=openwrt%2Fstaging%2Fwigyori.git

ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board

The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the
mini-PCIe device. Not configuring the LED pin inside the platform data
makes it impossible to configure it through any standard OpenWrt tool.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 42184
---

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c
index 496956446b..701330cebd 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c
@@ -164,6 +164,7 @@ static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds)
 static void __init mr600_setup(void)
 {
 	mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio);
+	ap9x_pci_setup_wmac_led_pin(0, 0);
 }
 
 MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup);