From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Wed, 11 Aug 2021 10:06:09 +0000 (+0900)
Subject: realtek: use physical addresses in soc dtsi in 5.10
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=45b2a5d840590fb9b8a4c64fba4deca51a2b0b65;p=openwrt%2Fstaging%2F981213.git

realtek: use physical addresses in soc dtsi in 5.10

Use physical addresses instead of virtual address in dts files.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---

diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi
index f2824cdceb..a72addcf36 100644
--- a/target/linux/realtek/dts-5.10/rtl838x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi
@@ -79,7 +79,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0xb8000000 0x10000>;
+		ranges = <0x0 0x18000000 0x10000>;
 
 		intc: rtlintc@3000 {
 			compatible = "realtek,rtl-intc";
@@ -167,9 +167,9 @@
 		status = "disabled";
 	};
 
-	pinmux: pinmux@bb001000 {
+	pinmux: pinmux@1b001000 {
 		compatible = "pinctrl-single";
-		reg = <0xbb001000 0x4>;
+		reg = <0x1b001000 0x4>;
 
 		pinctrl-single,bit-per-mux;
 		pinctrl-single,register-width = <32>;
@@ -182,9 +182,9 @@
 	};
 
 	/* LED_GLB_CTRL */
-	pinmux_led: pinmux@bb00a000 {
+	pinmux_led: pinmux@1b00a000 {
 		compatible = "pinctrl-single";
-		reg = <0xbb00a000 0x4>;
+		reg = <0x1b00a000 0x4>;
 
 		pinctrl-single,bit-per-mux;
 		pinctrl-single,register-width = <32>;
@@ -197,9 +197,9 @@
 		};
 	};
 
-	ethernet0: ethernet@bb00a300 {
+	ethernet0: ethernet@1b00a300 {
 		compatible = "realtek,rtl838x-eth";
-		reg = <0xbb00a300 0x100>;
+		reg = <0x1b00a300 0x100>;
 		interrupt-parent = <&intc>;
 		interrupts = <24>;
 		#interrupt-cells = <1>;
@@ -211,7 +211,7 @@
 		};
 	};
 
-	switch0: switch@bb000000 {
+	switch0: switch@1b000000 {
 		compatible = "realtek,rtl83xx-switch";
 
 		interrupt-parent = <&intc>;
diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
index d01307a35d..e78e9ebeb8 100644
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi
@@ -91,7 +91,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0xb8000000 0x10000>;
+		ranges = <0x0 0x18000000 0x10000>;
 
 		intc: rtlintc@3000 {
 			compatible = "realtek,rtl-intc";
@@ -179,9 +179,9 @@
 		};
 	};
 
-	ethernet0: ethernet@bb00a300 {
+	ethernet0: ethernet@1b00a300 {
 		compatible = "realtek,rtl838x-eth";
-		reg = <0xbb00a300 0x100>;
+		reg = <0x1b00a300 0x100>;
 		interrupt-parent = <&intc>;
 		interrupts = <24>;
 		#interrupt-cells = <1>;
@@ -193,7 +193,7 @@
 		};
 	};
 
-	switch0: switch@bb000000 {
+	switch0: switch@1b000000 {
 		compatible = "realtek,rtl83xx-switch";
 
 		interrupt-parent = <&intc>;