From: Sven Eckelmann <sven@narfation.org>
Date: Mon, 24 Oct 2022 16:55:44 +0000 (+0200)
Subject: ipq40xx: Convert plasmacloud,pa1200 to DSA
X-Git-Tag: v23.05.0-rc1~1795
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=539a5fd62490c22fdd29ddbc2ccfb2fd25cba610;p=openwrt%2Fstaging%2Fhauke.git

ipq40xx: Convert plasmacloud,pa1200 to DSA

* ethernet1:

  - physical port label "Ethernet 1"
  - its mac address is printed on the device label

* ethernet2:

  - physical port label "Ethernet 2"
  - can be used to power the device

Both ports are not marked by there role (because the vendor firmware
automatically detects roles) but the "Ethernet 2" port was used in the past
for "WAN" functionality in OpenWrt.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index e682a0fb15..dc111044e8 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -77,6 +77,9 @@ ipq40xx_setup_interfaces()
 	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
 		;;
+	plasmacloud,pa1200)
+		ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
+		;;
 	zte,mf286d)
 		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
 		;;
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
index dac4adbd5f..af4a7b196b 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
@@ -17,10 +17,6 @@
 			status = "okay";
 		};
 
-		mdio@90000 {
-			status = "okay";
-		};
-
 		tcsr@194b000 {
 			/* select hostmode */
 			compatible = "qcom,tcsr";
@@ -75,6 +71,7 @@
 		led-failsafe = &led_status_yellow;
 		led-running = &led_status_cyan;
 		led-upgrade = &led_status_yellow;
+		label-mac-device = &swport5;
 	};
 
 	leds {
@@ -183,6 +180,34 @@
 	status = "okay";
 };
 
+&mdio {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "ethernet2";
+
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_gmac1>;
+};
+
+&swport5 {
+	status = "okay";
+	label = "ethernet1";
+
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_gmac0>;
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 9553931676..8b2851f83e 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -958,8 +958,7 @@ define Device/plasmacloud_pa1200
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += plasmacloud_pa1200
+TARGET_DEVICES += plasmacloud_pa1200
 
 define Device/plasmacloud_pa2200
 	$(call Device/FitImageLzma)