From: Sungbo Eo Date: Wed, 17 Feb 2021 12:36:25 +0000 (+0900) Subject: kirkwood: refresh patches for kernel 5.10 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=58ebc507241d4f1b9c4505c4b47acbf51f12d3ec;p=openwrt%2Fstaging%2Fdedeckeh.git kirkwood: refresh patches for kernel 5.10 Refresh patches to make them apply to kernel 5.10. The removed patch has been merged upstream. Signed-off-by: Sungbo Eo --- diff --git a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch deleted file mode 100644 index 52caee7b40..0000000000 --- a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch +++ /dev/null @@ -1,485 +0,0 @@ -From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Tue, 17 Mar 2020 21:28:01 +0100 -Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board - -This patch adds dts for the Check Point L-50 from 600/1100 series -routers. - -Specification: --CPU: Marvell Kirkwood 88F6821 1200MHz --RAM: 512MB --Flash: NAND 512MB --WiFi: mPCIe card based on Atheros AR9287 b/g/n --WAN: 1 Gigabit Port (Marvell 88E1116R PHY) --LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3)) --USB: 2x USB2.0 --Express card slot --SD card slot --Serial console: RJ-45 115200 8n1 --Unsupported DSL - -Reviewed-by: Andrew Lunn -Signed-off-by: Pawel Dembicki ---- -Changes in v3: -- fix typo and code style issues pointed by OpenWrt guys -Changes in v2: -- none - - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++ - 2 files changed, 439 insertions(+) - create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-iomega_ix2_200.dtb \ - kirkwood-is2.dtb \ - kirkwood-km_kirkwood.dtb \ -+ kirkwood-l-50.dtb \ - kirkwood-laplug.dtb \ - kirkwood-linkstation-lsqvl.dtb \ - kirkwood-linkstation-lsvl.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-l-50.dts -@@ -0,0 +1,438 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Check Point L-50 Board Description -+ * Copyright 2020 Pawel Dembicki -+ */ -+ -+/dts-v1/; -+ -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+ -+/ { -+ model = "Check Point L-50"; -+ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200n8"; -+ stdout-path = &uart0; -+ }; -+ -+ ocp@f1000000 { -+ pinctrl: pin-controller@10000 { -+ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; -+ pinctrl-names = "default"; -+ -+ pmx_sysrst: pmx-sysrst { -+ marvell,pins = "mpp6"; -+ marvell,function = "sysrst"; -+ }; -+ -+ pmx_button29: pmx_button29 { -+ marvell,pins = "mpp29"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led38: pmx_led38 { -+ marvell,pins = "mpp38"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_sdio_cd: pmx-sdio-cd { -+ marvell,pins = "mpp46"; -+ marvell,function = "gpio"; -+ }; -+ }; -+ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ mvsdio@90000 { -+ status = "okay"; -+ cd-gpios = <&gpio1 14 9>; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ clock-frequency = <400000>; -+ -+ gpio2: gpio-expander@20{ -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ compatible = "semtech,sx1505q"; -+ reg = <0x20>; -+ -+ gpio-controller; -+ }; -+ -+ /* Three GPIOs from 0x21 exp. are undescribed in dts: -+ * 1: DSL module reset (active low) -+ * 5: mPCIE reset (active low) -+ * 6: Express card reset (active low) -+ */ -+ gpio3: gpio-expander@21{ -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ compatible = "semtech,sx1505q"; -+ reg = <0x21>; -+ -+ gpio-controller; -+ }; -+ -+ rtc@30 { -+ compatible = "s35390a"; -+ reg = <0x30>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status_green { -+ label = "l-50:green:status"; -+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; -+ }; -+ -+ status_red { -+ label = "l-50:red:status"; -+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wifi { -+ label = "l-50:green:wifi"; -+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "phy0tpt"; -+ }; -+ -+ internet_green { -+ label = "l-50:green:internet"; -+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; -+ }; -+ -+ internet_red { -+ label = "l-50:red:internet"; -+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb1_green { -+ label = "l-50:green:usb1"; -+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port3>; -+ }; -+ -+ usb1_red { -+ label = "l-50:red:usb1"; -+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb2_green { -+ label = "l-50:green:usb2"; -+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port1>; -+ }; -+ -+ usb2_red { -+ label = "l-50:red:usb2"; -+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ usb2_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb2_pwr"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; -+ regulator-always-on; -+ }; -+ -+ usb1_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb1_pwr"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; -+ regulator-always-on; -+ }; -+ -+ mpcie_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "mpcie_pwr"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ express_card_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "express_card_pwr"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ keys { -+ compatible = "gpio-keys"; -+ -+ factory_defaults { -+ label = "factory_defaults"; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -+ linux,code = ; -+ }; -+ }; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphy8: ethernet-phy@8 { -+ reg = <0x08>; -+ }; -+ -+ switch0: switch@10 { -+ compatible = "marvell,mv88e6085"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x10>; -+ dsa,member = <0 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan5"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan6"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan2"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan7"; -+ }; -+ -+ switch0port5: port@5 { -+ reg = <5>; -+ phy-mode = "rgmii-txid"; -+ link = <&switch1port5>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "cpu"; -+ phy-mode = "rgmii-id"; -+ ethernet = <ð1port>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+ -+ switch@11 { -+ compatible = "marvell,mv88e6085"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x11>; -+ dsa,member = <0 1>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan3"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan8"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan4"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "dmz"; -+ }; -+ -+ switch1port5: port@5 { -+ reg = <5>; -+ phy-mode = "rgmii-txid"; -+ link = <&switch0port5>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "dsl"; -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+ ethernet0-port@0 { -+ phy-handle = <ðphy8>; -+ }; -+}; -+ -+ð1 { -+ status = "okay"; -+ ethernet1-port@0 { -+ speed = <1000>; -+ duplex = <1>; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ pinctrl-0 = <&pmx_nand>; -+ pinctrl-names = "default"; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x00000000 0x000c0000>; -+ }; -+ -+ partition@a0000 { -+ label = "bootldr-env"; -+ reg = <0x000c0000 0x00040000>; -+ }; -+ -+ partition@100000 { -+ label = "kernel-1"; -+ reg = <0x00100000 0x00800000>; -+ }; -+ -+ partition@900000 { -+ label = "rootfs-1"; -+ reg = <0x00900000 0x07100000>; -+ }; -+ -+ partition@7a00000 { -+ label = "kernel-2"; -+ reg = <0x07a00000 0x00800000>; -+ }; -+ -+ partition@8200000 { -+ label = "rootfs-2"; -+ reg = <0x08200000 0x07100000>; -+ }; -+ -+ partition@f300000 { -+ label = "default_sw"; -+ reg = <0x0f300000 0x07900000>; -+ }; -+ -+ partition@16c00000 { -+ label = "logs"; -+ reg = <0x16c00000 0x01800000>; -+ }; -+ -+ partition@18400000 { -+ label = "preset_cfg"; -+ reg = <0x18400000 0x00100000>; -+ }; -+ -+ partition@18500000 { -+ label = "adsl"; -+ reg = <0x18500000 0x00100000>; -+ }; -+ -+ partition@18600000 { -+ label = "storage"; -+ reg = <0x18600000 0x07a00000>; -+ }; -+}; -+ -+&rtc { -+ status = "disabled"; -+}; -+ -+&pciec { -+ status = "okay"; -+}; -+ -+&pcie0 { -+ status = "okay"; -+}; -+ -+&sata_phy0 { -+ status = "disabled"; -+}; -+ -+&sata_phy1 { -+ status = "disabled"; -+}; -+ -+&usb0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ -+ hub_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ hub_port3: port@3 { -+ reg = <3>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+}; diff --git a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch index c1645367a4..35db065727 100644 --- a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch +++ b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig -@@ -119,6 +119,7 @@ config MACH_DOVE +@@ -116,6 +116,7 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" depends on ARCH_MULTI_V5 diff --git a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch index b7e7f50271..18c03efa8f 100644 --- a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch +++ b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch @@ -41,7 +41,7 @@ Signed-off-by: Imre Kaloz parts[i].name = partname; if (of_get_property(pp, "read-only", &len)) -@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi +@@ -218,6 +227,18 @@ static int __init ofpart_parser_init(voi return 0; }