From: Gabor Juhos Date: Fri, 1 Feb 2013 15:50:29 +0000 (+0000) Subject: ar71xx: add kernel support for the TL-WDR3500 board X-Git-Tag: reboot~11415 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=5bd02ca895b989774c50def5cc92f1429f833479;p=openwrt%2Fopenwrt.git ar71xx: add kernel support for the TL-WDR3500 board WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet, and has only 1 USB port. Pending issues: * Leds are not working at all (except power and wlan_5g) * LAN switch ethernet ports are reversed with respect to case label. [Label] -> soft device [LAN1] -> eth0.4 [LAN2] -> eth0.3 [LAN3] -> eth0.2 [LAN4] -> eth0.1 Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser Signed-off-by: Gui Iribarren Signed-off-by: Gabor Juhos SVN-Revision: 35423 --- diff --git a/target/linux/ar71xx/config-3.7 b/target/linux/ar71xx/config-3.7 index 11498c5859..749b3df83d 100644 --- a/target/linux/ar71xx/config-3.7 +++ b/target/linux/ar71xx/config-3.7 @@ -65,6 +65,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y CONFIG_ATH79_MACH_TL_MR3X20=y CONFIG_ATH79_MACH_TL_WA901ND=y CONFIG_ATH79_MACH_TL_WA901ND_V2=y +CONFIG_ATH79_MACH_TL_WDR3500=y CONFIG_ATH79_MACH_TL_WDR4300=y CONFIG_ATH79_MACH_TL_WR1041N_V2=y CONFIG_ATH79_MACH_TL_WR1043ND=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c new file mode 100644 index 0000000000..05fe83d4a7 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c @@ -0,0 +1,153 @@ +/* + * TP-LINK TL-WDR3500 board support + * + * Copyright (C) 2012 Gabor Juhos + * Copyright (C) 2013 Gui Iribarren + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WDR3500_GPIO_LED_USB1 11 +#define WDR3500_GPIO_LED_WLAN2G 13 +#define WDR3500_GPIO_LED_SYSTEM 14 +#define WDR3500_GPIO_LED_QSS 15 + +#define WDR3500_GPIO_BTN_WPS 16 +#define WDR3500_GPIO_BTN_RFKILL 17 + +#define WDR3500_GPIO_USB1_POWER 22 + +#define WDR3500_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WDR3500_KEYS_DEBOUNCE_INTERVAL (3 * WDR3500_KEYS_POLL_INTERVAL) + +#define WDR3500_MAC0_OFFSET 0 +#define WDR3500_MAC1_OFFSET 6 +#define WDR3500_WMAC_CALDATA_OFFSET 0x1000 +#define WDR3500_PCIE_CALDATA_OFFSET 0x5000 + +static const char *wdr3500_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data wdr3500_flash_data = { + .part_probes = wdr3500_part_probes, +}; + +static struct gpio_led wdr3500_leds_gpio[] __initdata = { + { + .name = "tp-link:green:qss", + .gpio = WDR3500_GPIO_LED_QSS, + .active_low = 1, + }, + { + .name = "tp-link:green:system", + .gpio = WDR3500_GPIO_LED_SYSTEM, + .active_low = 1, + }, + { + .name = "tp-link:green:usb1", + .gpio = WDR3500_GPIO_LED_USB1, + .active_low = 1, + }, + { + .name = "tp-link:green:wlan2g", + .gpio = WDR3500_GPIO_LED_WLAN2G, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = { + { + .desc = "QSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL, + .gpio = WDR3500_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL, + .gpio = WDR3500_GPIO_BTN_RFKILL, + }, +}; + + +static void __init wdr3500_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(&wdr3500_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio), + wdr3500_leds_gpio); + ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wdr3500_gpio_keys), + wdr3500_gpio_keys); + + ath79_init_mac(tmpmac, mac, 0); + ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_init_mac(tmpmac, mac, 1); + ap9x_pci_setup_wmac_led_pin(0, 0); + ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + + /* LAN */ + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + + ath79_register_eth(1); + + /* WAN */ + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2); + + /* GMAC0 is connected to the PHY4 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + + ath79_register_eth(0); + + gpio_request_one(WDR3500_GPIO_USB1_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB1 power"); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500", + "TP-LINK TL-WDR3500", + wdr3500_setup); diff --git a/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch new file mode 100644 index 0000000000..0a2c3bda51 --- /dev/null +++ b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -84,6 +84,7 @@ enum ath79_mach_type { + ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ + ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ + ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2 + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WDR3500 ++ bool "TP-LINK TL-WDR3500 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WDR4300 + bool "TP-LINK TL-WDR3600/4300/4310 board support" + select SOC_AR934X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR3020) += ma + obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o + obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o + obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o + obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o