From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Date: Wed, 1 Jun 2022 20:20:08 +0000 (-0300)
Subject: realtek: add reset button for D-Link DGS-1210-28
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=8121e7dd75d53bc7fa1f16fc360eda03385a9b05;p=openwrt%2Fstaging%2F981213.git

realtek: add reset button for D-Link DGS-1210-28

Tested in a DGS-1210-28 F3, both triggering failsafe and reboot.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
index edd4fb140f..bf25140e97 100644
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
+++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts
@@ -5,6 +5,24 @@
 / {
 	compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc";
 	model = "D-Link DGS-1210-28";
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio1: rtl8231-gpio {
+		compatible = "realtek,rtl8231-gpio";
+		#gpio-cells = <2>;
+		gpio-controller;
+		indirect-access-bus-id = <0>;
+	};
 };
 
 &ethernet0 {