From: Adrian Schmutzler Date: Tue, 18 Aug 2020 11:49:15 +0000 (+0200) Subject: ath79: add support for TP-Link TL-WR710N v2.1 X-Git-Tag: v19.07.4~17 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=8b0278a17eea57558ff38e825f37c538af3827e2;p=openwrt%2Fstaging%2Fchunkeey.git ath79: add support for TP-Link TL-WR710N v2.1 This adds support for the TP-Link TL-WR710N v2.1. It is basically a re-issue of the v1.2. Specifications: SoC: Atheros AR9331 CPU: 400 MHz Flash: 8 MiB RAM: 32 MiB WiFi: 2.4 GHz b/g/n Ethernet: 2x 100M ports USB: 1x 2.0 The only difference from the v1 is the TP-Link hardware ID/revision. Attention: The TL-WR710N v2.0 (!) has only 4 MB flash and cannot be flashed with this image. It has a different TPLINK_HWREV, so accidental flashing of the factory image should be impossible without additional measures. Unfortunately, the v2.0 in ar71xx has the same board name, so sysupgrade from ar71xx v2.0 into ath79 v1/v2.1 will not be prevented, but will brick the device. Flashing instruction: Upload the factory image via the OEM firmware GUI upgrade mechanism. Further notes: To make implementation easier if somebody desires to port the 4M v2.0, this already creates two DTSI files. Signed-off-by: Adrian Schmutzler Tested-by: Fabian Eppig (backported from eb531337a779a48a2d17bc66f0d222325d6c1563) --- diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi new file mode 100644 index 0000000000..ffc98e6e1c --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9331_tplink_tl-wr710n.dtsi" + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + reg = <0x20000 0x7d0000>; + label = "firmware"; + }; + + art: partition@7f0000 { + reg = <0x7f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts index c037015e4c..634b56d3be 100644 --- a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts @@ -1,126 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include - -#include "ar9331.dtsi" +#include "ar9331_tplink_tl-wr710n-8m.dtsi" / { model = "TP-Link TL-WR710N v1"; compatible = "tplink,tl-wr710n-v1", "qca,ar9331"; - - aliases { - serial0 = &uart; - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "tl-wr710n:green:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - }; - }; - - reg_usb_vbus: regulator { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - firmware: partition@20000 { - compatible = "tplink,firmware"; - reg = <0x20000 0x7d0000>; - label = "firmware"; - }; - - art: partition@7f0000 { - reg = <0x7f0000 0x10000>; - label = "art"; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&uboot 0x1fc00>; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&uboot 0x1fc00>; - mtd-mac-address-increment = <(-1)>; -}; - -&uart { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - vbus-supply = <®_usb_vbus>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&uboot 0x1fc00>; }; diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts new file mode 100644 index 0000000000..48d44000ee --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9331_tplink_tl-wr710n-8m.dtsi" + +/ { + model = "TP-Link TL-WR710N v2.1"; + compatible = "tplink,tl-wr710n-v2.1", "qca,ar9331"; +}; diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi new file mode 100644 index 0000000000..6ec44c2cdc --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "ar9331.dtsi" + +/ { + aliases { + serial0 = &uart; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "tl-wr710n:green:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb_vbus: regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; +}; + +&gpio { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb { + status = "okay"; + + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 99ca14ebe1..2ae84bd2ed 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -322,6 +322,17 @@ define Device/tplink_tl-wr710n-v1 endef TARGET_DEVICES += tplink_tl-wr710n-v1 +define Device/tplink_tl-wr710n-v2.1 + $(Device/tplink-8mlzma) + ATH_SOC := ar9331 + DEVICE_TITLE := TP-Link TL-WR710N v2.1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport + TPLINK_HWID := 0x07100002 + TPLINK_HWREV := 0x2 + SUPPORTED_DEVICES += tl-wr710n +endef +TARGET_DEVICES += tplink_tl-wr710n-v2.1 + define Device/tplink_tl-wr842n-v1 $(Device/tplink-8m) ATH_SOC := ar7241