From: Sven Eckelmann Date: Mon, 23 Nov 2020 12:41:34 +0000 (+0100) Subject: ath79: Add support for OpenMesh A40 X-Git-Tag: v22.03.0-rc1~2436 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=9a172797e593c061f6759a37eaeba2956ad8d72f;p=openwrt%2Fstaging%2Fhauke.git ath79: Add support for OpenMesh A40 Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi (11n) * 2T2R 5 GHz Wi-Fi (11ac) * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x ethernet - eth0 + Label: Ethernet 1 + AR8035 ethernet PHY (RGMII) + 10/100/1000 Mbps Ethernet + 802.3af POE + used as WAN interface - eth1 + Label: Ethernet 2 + AR8035 ethernet PHY (SGMII) + 10/100/1000 Mbps Ethernet + used as LAN interface * 1x USB * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 .bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp .bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/.bin Signed-off-by: Sven Eckelmann --- diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 1fc484df52..91ba587bf8 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -48,6 +48,7 @@ netgear,wnr2200-16m|\ netgear,wnr612-v2|\ ocedo,koala|\ ocedo,raccoon|\ +openmesh,a40|\ openmesh,a60|\ openmesh,mr600-v1|\ openmesh,mr600-v2|\ diff --git a/target/linux/ath79/dts/qca9558_openmesh_a40.dts b/target/linux/ath79/dts/qca9558_openmesh_a40.dts new file mode 100644 index 0000000000..d2b817031a --- /dev/null +++ b/target/linux/ath79/dts/qca9558_openmesh_a40.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_openmesh_a60.dtsi" + +/ { + compatible = "openmesh,a40", "qca,qca9558"; + model = "OpenMesh A40"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index d2b55f0ba6..87aaf0bcad 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -170,6 +170,7 @@ ath79_setup_interfaces() comfast,cf-e120a-v3|\ comfast,cf-e314n-v2|\ compex,wpj531-16m|\ + openmesh,a40|\ openmesh,a60|\ openmesh,om2p-v4|\ openmesh,om2p-hs-v4|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 1402c5529a..a7986a98ec 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -98,6 +98,7 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(mtd_get_mac_binary art 0xc) ;; + openmesh,a40|\ openmesh,a60|\ openmesh,mr1750-v1|\ openmesh,mr1750-v2) diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 9b6a0cf9bc..20041e4c95 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -65,6 +65,7 @@ platform_do_upgrade() { jjplus,ja76pf2) redboot_fis_do_upgrade "$1" linux ;; + openmesh,a40|\ openmesh,a60|\ openmesh,mr600-v1|\ openmesh,mr600-v2|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 7c26f5dc1f..86aae57266 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1628,6 +1628,16 @@ define Device/openmesh_common_256k openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata endef +define Device/openmesh_a40 + $(Device/openmesh_common_64k) + SOC := qca9558 + DEVICE_MODEL := A40 + DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 + OPENMESH_CE_TYPE := A60 + SUPPORTED_DEVICES += a40 +endef +TARGET_DEVICES += openmesh_a40 + define Device/openmesh_a60 $(Device/openmesh_common_64k) SOC := qca9558