From: David Bauer Date: Fri, 17 Dec 2021 23:33:57 +0000 (+0100) Subject: ramips: work around duplicate MAC address on U6 Lite X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=b1d483b865d0a6110d95a0638903a73c7354865a;p=openwrt%2Fstaging%2Fjow.git ramips: work around duplicate MAC address on U6 Lite The UniFi 6 Lite has two MAC addresses for the 2.4 and 5GHz radio in it's EEPROM partition. On my unit these are F4 92 BF A0 BB 6F F6 92 BF A0 BB 6F The problem with these is that mac80211 increases the first octet by 2, which leads to conflicting MAC addresses between radios. Work around this problem for now by increasing the last octet by 1 on the 5 GHz radio. Ubiquiti increases the last octet by 2 for each subsequent VAP created per radio. Ideally we should do the same, however this functionality is currently lacking from mac80211. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts b/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts index 0e56d16a7f..afd54e816b 100644 --- a/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts @@ -90,6 +90,21 @@ nvmem-cells = <&macaddr_eeprom_6>; nvmem-cell-names = "mac-address"; + + /* This is a workaround. + * + * Ubiquiti uses a +2 offset in the first octet relative + * to the 2.4 GHz WMAC. Other octets are identical. + * + * The vendor firmware increases the last octet by 2 for each + * VAP. + * + * This is in conflict on how mac80211 addresses subsequent VAPs. + * mac80211 increases the first octet by two for each VAP, leading + * to conflicting MAC addresses for subsequent interfaces. + */ + mac-address-increment = <1>; + ieee80211-freq-limit = <5000000 6000000>; };