From: Mathias Kresin Date: Wed, 12 Oct 2016 17:04:08 +0000 (+0200) Subject: ramips: tag the CPU switch port X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=bbdf2ac305b797545ee0f663b7815c116e276b63;p=openwrt%2Fstaging%2Fflorian.git ramips: tag the CPU switch port With de5102651501e51c036f88fe9c4dbf6974e5158a the explicit tagging of the CPU port was removed. This leads to a not working default network config, with vlans enabled but disabled CPU tagging, for boards where all switch ports are having the same role. In case the ports are having different roles set, tagging is is set implicit for the CPU port by ucidef_add_switch(). Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7eab5f286a..b884373325 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -24,7 +24,7 @@ ramips_setup_rt3x5x_vlans() lanports="$port:lan $lanports" fi done - ucidef_add_switch "rt305x" $lanports $wanports "6@eth0" + ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0" } ramips_setup_interfaces()