From: Robert Marko Date: Mon, 22 May 2023 21:10:55 +0000 (+0200) Subject: ipq807x: mark merged patches as backports X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=bc66c0528023c4035be8e5a27c6e9339a2b66023;p=openwrt%2Fstaging%2Fnbd.git ipq807x: mark merged patches as backports These 3 patches have been merged upstream, so mark them as backports along with the kernel version they have been merged into. Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq807x/patches-5.15/0080-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/ipq807x/patches-5.15/0080-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch new file mode 100644 index 0000000000..8719bf74c4 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0080-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch @@ -0,0 +1,24 @@ +From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:36 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed + +Add the generic 'max-link-speed' property to describe the Gen2 PCIe link +generation limit. +This allows the generic DWC code to configure the link speed correctly. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -766,6 +766,7 @@ + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; ++ max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + diff --git a/target/linux/ipq807x/patches-5.15/0081-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0081-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch new file mode 100644 index 0000000000..c7a7e7ab49 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0081-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch @@ -0,0 +1,23 @@ +From 76893579a74e7e5c79f0c717d95d13f4cbbb5f4d Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 24 Dec 2022 17:11:16 +0100 +Subject: [PATCH] PCI: qcom: Add support for IPQ8074 Gen3 port + +IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. +Add compatible for Gen3 port which uses the same controller as IPQ6018. + +Signed-off-by: Robert Marko +--- + drivers/pci/controller/dwc/pcie-qcom.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -1733,6 +1733,7 @@ static const struct of_device_id qcom_pc + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, ++ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &ipq6018_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, diff --git a/target/linux/ipq807x/patches-5.15/0082-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/ipq807x/patches-5.15/0082-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch new file mode 100644 index 0000000000..eb772be4ce --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0082-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch @@ -0,0 +1,38 @@ +From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 8 Jan 2023 13:36:28 +0100 +Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s + +Having only .name populated in parent_data for clocks which are only +globally searchable currently will not work as the clk core won't copy +that name if there is no .fw_name present as well. + +So, populate .fw_name for usb3phy clocks in parent_data as they were +missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). + +Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") +Signed-off-by: Robert Marko +--- + drivers/clk/qcom/gcc-ipq8074.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -934,7 +934,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_0_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -1002,7 +1002,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_1_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + diff --git a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch deleted file mode 100644 index 0fa38394b9..0000000000 --- a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch +++ /dev/null @@ -1,24 +0,0 @@ -From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 16 Nov 2022 22:48:36 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed - -Add the generic 'max-link-speed' property to describe the Gen2 PCIe link -generation limit. -This allows the generic DWC code to configure the link speed correctly. - -Signed-off-by: Robert Marko ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -801,6 +801,7 @@ - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <1>; -+ max-link-speed = <2>; - #address-cells = <3>; - #size-cells = <2>; - diff --git a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch deleted file mode 100644 index c7a7e7ab49..0000000000 --- a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 76893579a74e7e5c79f0c717d95d13f4cbbb5f4d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sat, 24 Dec 2022 17:11:16 +0100 -Subject: [PATCH] PCI: qcom: Add support for IPQ8074 Gen3 port - -IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. -Add compatible for Gen3 port which uses the same controller as IPQ6018. - -Signed-off-by: Robert Marko ---- - drivers/pci/controller/dwc/pcie-qcom.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -1733,6 +1733,7 @@ static const struct of_device_id qcom_pc - { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, - { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, - { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, -+ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &ipq6018_cfg }, - { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, - { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, - { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, diff --git a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch deleted file mode 100644 index eb772be4ce..0000000000 --- a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 8 Jan 2023 13:36:28 +0100 -Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s - -Having only .name populated in parent_data for clocks which are only -globally searchable currently will not work as the clk core won't copy -that name if there is no .fw_name present as well. - -So, populate .fw_name for usb3phy clocks in parent_data as they were -missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). - -Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") -Signed-off-by: Robert Marko ---- - drivers/clk/qcom/gcc-ipq8074.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -934,7 +934,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl - }; - - static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { -- { .name = "usb3phy_0_cc_pipe_clk" }, -+ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; - -@@ -1002,7 +1002,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl - }; - - static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { -- { .name = "usb3phy_1_cc_pipe_clk" }, -+ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; -