From: Shiji Yang Date: Sun, 21 Mar 2021 14:43:59 +0000 (+0800) Subject: ramips: speed up spi frequency for Youku YK-L1 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=bf7ddb18f1bfa0b61b4dc43732c114f20900bd4b;p=openwrt%2Fstaging%2Fldir.git ramips: speed up spi frequency for Youku YK-L1 Youku YK-L1 has a huge storage space up to 32 MB. It is better to use a higher spi clock to read or write serial nor flash chips. Youku YK-L1 has Winbond w25q256fvfg on board that can support 104 MHz spi clock so 48 MHz is safe enough. The real frequency can only be sysclk(580MHz ) /3 /(2^n) so 80 MHz defined in dts file will set only 48 MHz in spi bus. Signed-off-by: Shiji Yang --- diff --git a/target/linux/ramips/dts/mt7620a_youku_yk1.dts b/target/linux/ramips/dts/mt7620a_youku_yk1.dts index 8727b011d4..3b84b07b8b 100644 --- a/target/linux/ramips/dts/mt7620a_youku_yk1.dts +++ b/target/linux/ramips/dts/mt7620a_youku_yk1.dts @@ -69,7 +69,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <25000000>; + spi-max-frequency = <80000000>; m25p,fast-read; partitions {