From: Gabor Juhos Date: Wed, 17 Oct 2012 08:26:01 +0000 (+0000) Subject: ar71xx: add support for the OpenMesh OM2P-HS board X-Git-Tag: reboot~12598 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=c5a32cfc9270d17f9b150ed2fb0aff44d56ee24d;p=openwrt%2Fopenwrt.git ar71xx: add support for the OpenMesh OM2P-HS board Signed-off-by: Marek Lindner Signed-off-by: Gabor Juhos SVN-Revision: 33800 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c3f97345c6..c371a1f9dd 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -88,6 +88,7 @@ get_status_led() { status_led="nbg460n:green:power" ;; om2p | \ + om2p-hs | \ om2p-lc) status_led="om2p:blue:power" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index cb4b682994..ca912c70cf 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -78,6 +78,7 @@ nbg460n_550n_550nh) ;; om2p | \ +om2p-hs | \ om2p-lc) ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0" ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index f3c32555fe..14bd581d24 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -237,6 +237,9 @@ ar71xx_board_detect() { *OM2P) name="om2p" ;; + *"OM2P HS") + name="om2p-hs" + ;; *"OM2P LC") name="om2p-lc" ;; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c index faeb49a510..1855349a39 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c @@ -174,3 +174,71 @@ static void __init om2p_lc_setup(void) } MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup); + + +static void __init om2p_hs_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); + + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + + t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | + AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE | + AR934X_ETH_CFG_SW_PHY_SWAP); + + t |= AR934X_ETH_CFG_SW_PHY_SWAP; + __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init om2p_hs_setup(void) +{ + u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); + u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); + u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000); + + /* make lan / wan leds software controllable */ + ath79_gpio_output_select(OM2P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(OM2P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO); + + /* enable reset button */ + ath79_gpio_output_select(OM2P_GPIO_BTN_RESET, AR934X_GPIO_OUT_GPIO); + ath79_gpio_function_enable(AR933X_GPIO_FUNC_JTAG_DISABLE); + + om2p_leds_gpio[4].gpio = OM2P_GPIO_LED_WAN; + om2p_leds_gpio[5].gpio = OM2P_GPIO_LED_LAN; + + ath79_register_m25p80(&om2p_lc_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), + om2p_leds_gpio); + ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, + ARRAY_SIZE(om2p_gpio_keys), + om2p_gpio_keys); + + ath79_register_wmac(art, NULL); + + om2p_hs_gmac_setup(); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + + /* GMAC0 is connected to the PHY0 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_register_eth(0); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup); diff --git a/target/linux/ar71xx/generic/profiles/openmesh.mk b/target/linux/ar71xx/generic/profiles/openmesh.mk index 88e37ee56c..975a7edf1d 100644 --- a/target/linux/ar71xx/generic/profiles/openmesh.mk +++ b/target/linux/ar71xx/generic/profiles/openmesh.mk @@ -6,12 +6,12 @@ # define Profile/OM2P - NAME:=OpenMesh OM2P/OM2P-LC + NAME:=OpenMesh OM2P/OM2P-HS/OM2P-LC PACKAGES:=kmod-ath9k om-watchdog endef define Profile/OM2P/Description - Package set optimized for the OpenMesh OM2P/OM2P-LC. + Package set optimized for the OpenMesh OM2P/OM2P-HS/OM2P-LC. endef $(eval $(call Profile,OM2P)) diff --git a/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-OM-om2p-hs-support.patch b/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-OM-om2p-hs-support.patch new file mode 100644 index 0000000000..801d795454 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-OM-om2p-hs-support.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/ath79/machtypes.h 2012-10-12 21:42:29.000000000 +0800 ++++ b/arch/mips/ath79/machtypes.h 2012-10-12 21:43:28.000000000 +0800 +@@ -45,6 +45,7 @@ + ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ + ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ + ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ + ATH79_MACH_OM2P, /* OpenMesh OM2P */ + ATH79_MACH_PB42, /* Atheros PB42 */