From: Christian Lamparter <chunkeey@gmail.com>
Date: Tue, 10 Apr 2018 15:59:42 +0000 (-0500)
Subject: apm821xx: Force Ethernet PHYID on MX60/MX60W
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=c61c709f4e3f4331716d6e5624f7678d03b5d80c;p=openwrt%2Fstaging%2Fdedeckeh.git

apm821xx: Force Ethernet PHYID on MX60/MX60W

The MX60's uboot disables all the PHYs before starting linux.
This causes the PHY/switch detection code to malfunction
almost all of the time. To get around this, set a compatible
flag to force PHYID.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
---

diff --git a/target/linux/apm821xx/dts/meraki-mx60.dts b/target/linux/apm821xx/dts/meraki-mx60.dts
index 32e5c859e8..cf20e2e9e9 100644
--- a/target/linux/apm821xx/dts/meraki-mx60.dts
+++ b/target/linux/apm821xx/dts/meraki-mx60.dts
@@ -107,7 +107,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		phy0: ethernet-phy@0 {
-			device_type = "ethernet-phy";
+			compatible = "ethernet-phy-id004d.d034";
 			reg = <0>;
 			qca,ar8327-initvals = <
 				0x0010 0x40000000