From: David Bauer <mail@david-bauer.net>
Date: Tue, 1 Jan 2019 18:17:23 +0000 (+0100)
Subject: ath79: add support for devolo WiFi pro 1200i
X-Git-Tag: v19.07.0-rc1~1664
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=c8115167f946be85f812f3c94d6294b67ac8944c;hp=c8115167f946be85f812f3c94d6294b67ac8944c;p=openwrt%2Fopenwrt.git

ath79: add support for devolo WiFi pro 1200i

Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
---