From: Clemens Hopfer Date: Thu, 22 Jul 2021 15:54:15 +0000 (+0200) Subject: ramips: add support for YunCore AX820/HWAP-AX820 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=c8732f1b02f073290f741124d94577048fe2b6f8;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for YunCore AX820/HWAP-AX820 There are two versions which are identical apart from the enclosure: YunCore AX820: indoor ceiling mount AP with integrated antennas YunCore HWAP-AX820: outdoor enclosure with external (N) connectors Hardware specs: SoC: MediaTek MT7621DAT Flash: 16 MiB SPI NOR RAM: 128MiB (DDR3, integrated) WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN) LED: Status (green) Button: Reset Power: 802.11af/at PoE; DC 12V,1A Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external Flash instructions: The "OpenWRT support" version of the AX820 comes with a LEDE-based firmware with proprietary MTK drivers and a luci webinterface and ssh accessible under 192.168.1.1 on LAN; user root, no password. The sysupgrade.bin can be flashed using luci or sysupgrade via ssh, you will have to force the upgrade due to a different factory name. Remember: Do *not* preserve factory configuration! MAC addresses as used by OEM firmware: use address source 2g *:0b Factory 0x0004 (label) 5g * randomly generated lan *:0c Factory 0xe000 wan *:0d Factory 0xe000 + 1 The wan MAC can also be found in 0xe006 but is not used by OEM dtb. Signed-off-by: Clemens Hopfer --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 3e8d635eea..fc3a434bf4 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -23,7 +23,8 @@ sitecom,wlr-4100-v1-002) ;; allnet,all0256n-4m|\ allnet,all0256n-8m|\ -allnet,all5002) +allnet,all5002|\ +yuncore,ax820) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; ampedwireless,ally-00x19k|\ diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts new file mode 100644 index 0000000000..ca1e6ea4fe --- /dev/null +++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "yuncore,ax820", "mediatek,mt7621-soc"; + model = "YunCore AX820"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_green; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <200>; + always-running; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "Config"; + reg = <0x30000 0x10000>; + read-only; + }; + + /* range 0x40000 to 0x50000 is empty in vendor + * firmware, so we do not use it either + */ + + factory: partition@50000 { + label = "Factory"; + reg = <0x50000 0x40000>; + read-only; + }; + + partition@90000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x90000 0xf70000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; + + port@1 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index e14a25748f..20c8a9a2d8 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1724,6 +1724,15 @@ define Device/youku_yk-l2 endef TARGET_DEVICES += youku_yk-l2 +define Device/yuncore_ax820 + $(Device/dsa-migration) + IMAGE_SIZE := 15808k + DEVICE_VENDOR := YunCore + DEVICE_MODEL := AX820 + DEVICE_PACKAGES := kmod-mt7915e +endef +TARGET_DEVICES += yuncore_ax820 + define Device/zbtlink_zbt-we1326 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index bbc6fa8852..f2a668b272 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -73,6 +73,7 @@ ramips_setup_interfaces() ubnt,usw-flex) ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5" ;; + yuncore,ax820|\ zyxel,nr7101) ucidef_set_interfaces_lan_wan "lan" "wan" ;; @@ -178,6 +179,9 @@ ramips_setup_macs() } label_mac=$lan_mac ;; + yuncore,ax820) + label_mac=$(mtd_get_mac_binary Factory 0x4) + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 711af4e3af..06d0500037 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -25,9 +25,12 @@ case "$board" in [ "$PHYNBR" = "1" ] && \ macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress ;; - jcg,q20) - [ "$PHYNBR" = "1" ] && \ - macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress + jcg,q20|\ + yuncore,ax820) + if [ "$PHYNBR" = "1" ]; then + base_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 0x4)" 1) + macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress + fi ;; linksys,e5600|\ linksys,ea7300-v1|\