From: Sander Vanheule Date: Fri, 26 Nov 2021 21:16:02 +0000 (+0100) Subject: realtek: add sys-led disable pinctrl for rtl930x X-Git-Tag: v23.05.0-rc1~3031 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=cd7a225d28494478c2d588d23b0021167bba1bad;p=openwrt%2Fopenwrt.git realtek: add sys-led disable pinctrl for rtl930x Like for RTL838x devices, add a pinctrl-single node to manage the sys-led/gpio0 mux, and allow using the pin as GPIO. Co-developed-by: INAGAKI Hiroshi Signed-off-by: INAGAKI Hiroshi Signed-off-by: Sander Vanheule --- diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi index bfde5e6ff6..c2a992a174 100644 --- a/target/linux/realtek/dts-5.10/rtl930x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi @@ -135,6 +135,21 @@ }; + pinmux_led: pinmux@1b00cc00 { + compatible = "pinctrl-single"; + reg = <0x1b00cc00 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + /* enable GPIO 0 */ + pinmux_disable_sys_led: disable_sys_led { + pinctrl-single,bits = <0x0 0x0 0x1000>; + }; + }; + ethernet0: ethernet@1b00a300 { compatible = "realtek,rtl838x-eth"; reg = <0x1b00a300 0x100>;