From: Cezary Jackiewicz <cezary@eko.one.pl>
Date: Sun, 27 Feb 2022 13:12:39 +0000 (+0100)
Subject: comgt: support ZTE MF286R modem
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=e02fb42c53bad5dd36726c6ef5a46bfe31d2e400;p=openwrt%2Fstaging%2Fchunkeey.git

comgt: support ZTE MF286R modem

The modem is based on Marvell PXA1826 and uses ACM+RNDIS interface to
establish connection with custom commands specific to ZTE modems.
Two variants of modems were discovered, some identifying themselves
as "ZTE", and others as plain "Marvell", the chipset manufacturer.
The modem itself runs a fork of OpenWrt inside, which root shell can be
accessed via ADB interface.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---

diff --git a/package/network/utils/comgt/Makefile b/package/network/utils/comgt/Makefile
index db5ea57473..24dae2521e 100644
--- a/package/network/utils/comgt/Makefile
+++ b/package/network/utils/comgt/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=comgt
 PKG_VERSION:=0.32
-PKG_RELEASE:=33
+PKG_RELEASE:=34
 
 PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz
 PKG_SOURCE_URL:=@SF/comgt
diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json
index bbdb30c5ee..b6ad717529 100644
--- a/package/network/utils/comgt/files/ncm.json
+++ b/package/network/utils/comgt/files/ncm.json
@@ -74,5 +74,27 @@
 		"connect": "AT+CGACT=1,${profile}",
 		"finalize": "AT+CGDATA=\\\"M-MBIM\\\",${profile},1",
 		"disconnect": "AT+CGACT=0,${profile}"
+	},
+	"\"zte": {
+		"initialize": [
+			"AT+CFUN=1"
+		],
+		"configure": [
+			"AT+ZGDCONT=${profile},\\\"${pdptype}\\\",\\\"${apn}\\\",\\\"\\\",0,0",
+			"AT+ZGPCOAUTH=${profile},\\\"${username}\\\",\\\"${password}\\\",0"
+		],
+		"connect": "AT+ZGACT=1,${profile}",
+		"disconnect": "AT+ZGACT=0,${profile}"
+	},
+	"\"marvell\"": {
+		"initialize": [
+			"AT+CFUN=1"
+		],
+		"configure": [
+			"AT+ZGDCONT=${profile},\\\"${pdptype}\\\",\\\"${apn}\\\",\\\"\\\",0,0",
+			"AT+ZGPCOAUTH=${profile},\\\"${username}\\\",\\\"${password}\\\",0"
+		],
+		"connect": "AT+ZGACT=1,${profile}",
+		"disconnect": "AT+ZGACT=0,${profile}"
 	}
 }