openwrt/staging/blogic.git
5 years agox86: Use kernel specific subtarget configurations
Hauke Mehrtens [Sat, 8 Dec 2018 12:09:14 +0000 (13:09 +0100)]
x86: Use kernel specific subtarget configurations

This makes it possible to use different sub target configurations for
kernel 4.19 for example.
To support kernel 4.9 and kernel 4.14 with the same configuration file
already needed some extra work this will not be needed for kernel 4.19
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agogdb: The signal definitions of musl and gdb collide
Hauke Mehrtens [Wed, 2 Jan 2019 15:32:35 +0000 (16:32 +0100)]
gdb: The signal definitions of musl and gdb collide

This fixes compilation of gdb on arm64.

The kernel defines "struct sigcontext" in asm/sigcontext.h and musl libc
defines it in signal.h, which collides.
Kernel 4.14 misses the definitions of struct user_sve_header so we still
have to use the aarch64-sve-linux-sigcontext.h header file which also
provides that and make sure aarch64-sve-linux-sigcontext.h does not
provide the same headers as the kernel or musl.

Fixes: FS#2040
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agobzip2: fix hardening build
Hauke Mehrtens [Tue, 1 Jan 2019 23:22:41 +0000 (00:22 +0100)]
bzip2: fix hardening build

Set the LDFLAGS otherwise it will not get the target hardening flags or
any other generic flags provided in the LDFLAGS

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agotools/firmware-utils: fix sysupgrade typo in mkdapimg2
Hans Dedecker [Sat, 12 Jan 2019 18:47:02 +0000 (19:47 +0100)]
tools/firmware-utils: fix sysupgrade typo in mkdapimg2

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agotools/firmware-utils: fix sysupgrade typo in mkdapimg
Hans Dedecker [Sat, 12 Jan 2019 18:42:56 +0000 (19:42 +0100)]
tools/firmware-utils: fix sysupgrade typo in mkdapimg

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoocteon: fix typo in platform.sh
Hans Dedecker [Sat, 12 Jan 2019 18:39:01 +0000 (19:39 +0100)]
octeon: fix typo in platform.sh

Fix upgrade typo

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agocryptodev-linux: Update to 1.10
Daniel Engberg [Mon, 24 Dec 2018 10:34:22 +0000 (11:34 +0100)]
cryptodev-linux: Update to 1.10

Update cryptodev-linux to 1.10
Switch from git to codeload generated tarball

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
5 years agomt76: fix typo in version number
Felix Fietkau [Fri, 11 Jan 2019 16:23:29 +0000 (17:23 +0100)]
mt76: fix typo in version number

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agomt76: update to the latest version
Felix Fietkau [Fri, 11 Jan 2019 16:03:40 +0000 (17:03 +0100)]
mt76: update to the latest version

58988a3 mt76: fix signedness of rx status signal field
bce700d mt7603: fix signal strength reporting on single-stream devices
148219d mt7603: fix checkpatch issues
2a092e2 mt7603: fix per-rate retry accounting
962152b mt7603: fix WMM TXOP limit configuration
24ec040 mt7603: fix BSSID configuration in AP mode
48fb011 mt7603: fix CF-End transmit rate when 11b stations are connected
9daa5ff mt76: make const array 'data' static, shrinks object size
7d4a95c mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb
f84b008 mt76: fix tx status reporting for non-probing frames
8167074 Revert "mt7603: update firmware to 20161027164355"
2ad54b2 mt76: move wcid rssi ewma init to mt76 core
d77c861 mt76: fix rssi ewma tracking
eca96cd mt76: use proper name for __MT76x02_H macro
d1bc504 mt76: fix building without CONFIG_LEDS_CLASS
a946b78 mt76: add led support to mt76x0e driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoodhcp6c: update to latest git HEAD
Hans Dedecker [Fri, 11 Jan 2019 14:20:53 +0000 (15:20 +0100)]
odhcp6c: update to latest git HEAD

d2e247d odhcp6c: align further with RFC8415
ce83a23 dhcpv6: avoid parsing unncessary IAs
b079733 dhcpv6: set cnt to correct IOV enum
41494da dhcpv6: get rid of request_prefix
f7437e4 dhcpv6: sanitize option request list

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agokernel: add bcma fix for subdevices DMA parameters
Rafał Miłecki [Fri, 11 Jan 2019 06:31:58 +0000 (07:31 +0100)]
kernel: add bcma fix for subdevices DMA parameters

This fixes bgmac DMA allocations with kernel 4.19.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agokernel: backport bcma patches that improve printing functions
Rafał Miłecki [Thu, 10 Jan 2019 15:46:21 +0000 (16:46 +0100)]
kernel: backport bcma patches that improve printing functions

Updated printing functions use dev_* helpers to provide more meaningful
messages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agosamba36: add package with hotplug.d script for auto sharing
Rafał Miłecki [Wed, 26 Dec 2018 09:51:28 +0000 (10:51 +0100)]
samba36: add package with hotplug.d script for auto sharing

The new samba36-hotplug package provides a hotplug.d script for the
"mount" subsystem. It automatically shares every mounted block device.

It works by updating /var/run/config/samba file which:
1) Is read by procd init script
2) Gets wiped on reboot providing a consistent state
3) Can be safely updated without flash wearing or conflicting with user
   changes being made in /etc/config/samba

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agosamba36: append config from /var/run/config/ for runtime shares
Rafał Miłecki [Tue, 25 Dec 2018 19:30:12 +0000 (20:30 +0100)]
samba36: append config from /var/run/config/ for runtime shares

This will allow automation/hotplug.d scripts to store runtime shares in
the /var/run/config/samba. It's useful e.g. for USB drives that user
wants to be automatically shared.

Using /var/run/config/ provides:
1) Automated cleaning on reboots
   It's important for consistency (to avoid sharing non-existing drives)
2) Safety for user non-commited changes
   Automated scripts should never call "uci [foo] commit" as that could
   flush incomplete config.

Another minor gain is avoiding flash wearing for runtime setup.

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agobrcm47xx: backport MIPS fix adding struct device for the SoC
Rafał Miłecki [Thu, 10 Jan 2019 05:41:10 +0000 (06:41 +0100)]
brcm47xx: backport MIPS fix adding struct device for the SoC

It's needed to:
1) Fix GPIOLIB_IRQCHIP as in 4.19 there is no bcma revert anymore
2) Fix /sys/devices/
3) Fix dma_zalloc_coherent() regression

It still needs a bcma change that will follow later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agobrcm47xx: backport a final/accepted Netgear WNDR3400v3 patch
Rafał Miłecki [Thu, 10 Jan 2019 05:29:46 +0000 (06:29 +0100)]
brcm47xx: backport a final/accepted Netgear WNDR3400v3 patch

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agomac80211: brcmfmac: backport fixes from the 5.0-rc1
Rafał Miłecki [Tue, 8 Jan 2019 07:27:26 +0000 (08:27 +0100)]
mac80211: brcmfmac: backport fixes from the 5.0-rc1

This fixes:
1) Getting STA info with newer firmwares
2) Getting DMI / UEFI / OF data
3) Possible memory corruption in firmware loading code

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agomac80211: brcmfmac: trivial patches rename to use v5.0
Rafał Miłecki [Tue, 8 Jan 2019 06:20:47 +0000 (07:20 +0100)]
mac80211: brcmfmac: trivial patches rename to use v5.0

This matches Linus releasing 5.0-rc1 in place of 4.21-rc1.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agobison: update to 3.2.4
Egor Mikhaylov [Fri, 4 Jan 2019 14:58:42 +0000 (06:58 -0800)]
bison: update to 3.2.4

Signed-off-by: Egor Mikhaylov <nagakamira@gmail.com>
5 years agomac80211: brcmfmac: fix use-after-free & possible NULL pointer dereference
Rafał Miłecki [Mon, 7 Jan 2019 16:11:23 +0000 (17:11 +0100)]
mac80211: brcmfmac: fix use-after-free & possible NULL pointer dereference

1) Using fwctx variable after brcmf_fw_request_done() was executed meant
   accessing freed memory.
2) Using fwctx->completion for the wait_for_completion_timeout() call
   could reuslt in NULL pointer dereference on fw loading error or if
   brcmf_fw_request_done() was executed quickly enough.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agocns3xxx: use actual size reads for PCIe
Koen Vandeputte [Mon, 7 Jan 2019 10:59:49 +0000 (11:59 +0100)]
cns3xxx: use actual size reads for PCIe

upstream commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
which preserved the property of only doing 32-bit reads.

It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.

Due to:
- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended

It makes perfectly sense to also swap 32 bit reading in favor of actual size.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agogdb: bump to 8.2.1
Koen Vandeputte [Mon, 7 Jan 2019 11:35:34 +0000 (12:35 +0100)]
gdb: bump to 8.2.1

PR build/23516 (gdb build error under msys+mingw: strip can't handle gdb-add-index.exe)
PR build/23623 (install-strip fails)
PR rust/23626 (gdb crashes in upstream rust nil-enum test)
PR rust/23650 (rust field name access error mentions "foo")
PR gdb/23663 (gdb 8.1.1: undefined rpl_stat function with musl toolchains)
PR python/23669 (gdb.execute("show commands") doesn't work)
PR python/23714 (Command repetition stops working after gdb.execute)
PR gdb/23838 (8.2 regression for invalid -data-directory)
PR gdb/23974 ("info os" crash when specifying invalid object)
PR gdb/23999 (SYMBOL_LANGUAGE assertion failure on AIX)
PR gdb/24003 (Error when binary searching CUs for a specific DIE when using DWZ)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agotoolchain/gdb: bump to 8.2.1
Koen Vandeputte [Mon, 7 Jan 2019 11:35:20 +0000 (12:35 +0100)]
toolchain/gdb: bump to 8.2.1

PR build/23516 (gdb build error under msys+mingw: strip can't handle gdb-add-index.exe)
PR build/23623 (install-strip fails)
PR rust/23626 (gdb crashes in upstream rust nil-enum test)
PR rust/23650 (rust field name access error mentions "foo")
PR gdb/23663 (gdb 8.1.1: undefined rpl_stat function with musl toolchains)
PR python/23669 (gdb.execute("show commands") doesn't work)
PR python/23714 (Command repetition stops working after gdb.execute)
PR gdb/23838 (8.2 regression for invalid -data-directory)
PR gdb/23974 ("info os" crash when specifying invalid object)
PR gdb/23999 (SYMBOL_LANGUAGE assertion failure on AIX)
PR gdb/24003 (Error when binary searching CUs for a specific DIE when using DWZ)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.91
Koen Vandeputte [Mon, 7 Jan 2019 10:04:01 +0000 (11:04 +0100)]
kernel: bump 4.14 to 4.14.91

Refreshed all patches.

Removed upstreamed:
- 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.148
Koen Vandeputte [Mon, 7 Jan 2019 10:03:29 +0000 (11:03 +0100)]
kernel: bump 4.9 to 4.9.148

Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Removed upstreamed:
- 424-v4.20-net-dsa-fix-88e6060-roaming.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 3.18 to 3.18.131
Koen Vandeputte [Mon, 7 Jan 2019 09:55:44 +0000 (10:55 +0100)]
kernel: bump 3.18 to 3.18.131

Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoramips: whitespace cleanup inside hnat driver
John Crispin [Mon, 7 Jan 2019 14:45:51 +0000 (15:45 +0100)]
ramips: whitespace cleanup inside hnat driver

Signed-off-by: John Crispin <john@phrozen.org>
5 years agoramips: add two-way hashing scheme for MT7621
HsiuWen Yen [Mon, 7 Jan 2019 08:29:35 +0000 (16:29 +0800)]
ramips: add two-way hashing scheme for MT7621

Sometimes the tuples might be hashed to the same FOE entry.
When this hash collision problem occurs, some of the
connections will not be bound and consequently the CPU
idle rate cannot reach 100%. Therefore, two-way hashing
is adopted to alleviate this problem.

Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
5 years agoglibc: update to latest 2.27 commit (BZ #24018)
Hans Dedecker [Mon, 7 Jan 2019 14:13:39 +0000 (15:13 +0100)]
glibc: update to latest 2.27 commit (BZ #24018)

68c2930a56 NEWS: add entries for bugs 23275, 23861, and 23907
766e8fb932 intl: Do not return NULL on asprintf failure in gettext [BZ #24018]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agomac80211: add ABI_VERSION to fix rebuild of dependent packages after upgrades
Felix Fietkau [Sun, 6 Jan 2019 20:48:02 +0000 (21:48 +0100)]
mac80211: add ABI_VERSION to fix rebuild of dependent packages after upgrades

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE
David Bauer [Fri, 4 Jan 2019 20:17:20 +0000 (21:17 +0100)]
ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE

Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from
there) to fix image generation using the image-builder.

Also remove the bootloader from DEVICE_PACKAGES and instead use the
BUILD_DEVICES directive from within the U-Boot makefile.

This fixes eva-image generation using the OpenWRT image-builder.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agompc85xx: 4.19: refresh kernel config
Christian Lamparter [Sat, 5 Jan 2019 21:31:27 +0000 (22:31 +0100)]
mpc85xx: 4.19: refresh kernel config

This patch syncs the 4.19 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agompc85xx: 4.14: refresh kernel config
Christian Lamparter [Sat, 5 Jan 2019 21:30:25 +0000 (22:30 +0100)]
mpc85xx: 4.14: refresh kernel config

This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoipq40xx: 4.14: Sync kernel config
Robert Marko [Thu, 3 Jan 2019 22:32:47 +0000 (23:32 +0100)]
ipq40xx: 4.14: Sync kernel config

This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agoipq40xx: 4.19: Sync kernel config
Robert Marko [Wed, 2 Jan 2019 13:21:48 +0000 (14:21 +0100)]
ipq40xx: 4.19: Sync kernel config

This patch syncs the 4.19 kernel config since the
KERNEL_STACKPROTECTOR and compiler options are
now part of the 4.19 generic config.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agoipq40xx: fix 4.14 ImageBuilder build woes
Christian Lamparter [Thu, 3 Jan 2019 22:24:16 +0000 (23:24 +0100)]
ipq40xx: fix 4.14 ImageBuilder build woes

Robert Marko reported an issue with the current imagebuilder images:
"Imagebuilder includes the new kmod-usb-dwc3-qcom USB driver
package by default even on 4.14. [...] the current state imagebuilder
can't build images under 4.14 at all as the kmod-usb-dwc3-qcom does
not exist in it so it throws and error and exits."

This patch reverts the Makefile to just kmod-usb-dwc3-of-simple and
once the switch to 4.19 is done. It also removes the
kmod-usb-phy-qcom-dwc3 as they only contain the usb-phy drivers for
the ipq806x generation.

Dynamic switching based on the KERNEL_PATCHVER is possible by using:
   $(if $(filter 4.14,$(KERNEL_PATCHVER)),kmod-usb-dwc3-of-simple,kmod-usb-dwc3-qcom)
though it

Fixes: 13321fa1429 ("ipq40xx: Use kmod-usb-dwc3-qcom by default")
Fixes: 6e58fb2c33e ("ipq40xx: kmod-usb-dwc3-of-simple vs kmod-usb-dwc3-qcom")
Reported-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoapm821xx: MBL: fix kernel/apollo3g.dtb artifact build
Christian Lamparter [Thu, 3 Jan 2019 22:01:31 +0000 (23:01 +0100)]
apm821xx: MBL: fix kernel/apollo3g.dtb artifact build

The name for the artifact should have been apollo3g.dtb
and not kernel.dtb.

Fixes: 908bdbfce9f9 ("apm821xx: utilize build ARTIFACTs")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agompc85xx: add kernel 4.19 support
Pawel Dembicki [Tue, 1 Jan 2019 11:16:32 +0000 (11:16 +0000)]
mpc85xx: add kernel 4.19 support

Copied config from 4.14

Add patches for 4.19

Drop patch 103-powerpc-fix-build-cross32ar.patch,
because issue was fixed in upstream.

Compiled: generic p1020
Compiled and tested: (unofficial) P2020, TP-Link TL-WDR4900

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agokernel: 4.19: kmod-ptp-gianfar follow upstream changes
Pawel Dembicki [Wed, 2 Jan 2019 12:30:37 +0000 (13:30 +0100)]
kernel: 4.19: kmod-ptp-gianfar follow upstream changes

This patch deprecates the kmod-ptp-gianfar package and
introduces kmod-ptp-qoriq for 4.19+ in its place. This
has become necessary due to the linux kernel commit
ceefc71d4c05 ("ptp: rework gianfar_ptp as QorIQ common PTP driver")

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agompc85xx: tl-wdr4900-v1: convert to mtdsplit image
Pawel Dembicki [Thu, 3 Jan 2019 16:08:51 +0000 (16:08 +0000)]
mpc85xx: tl-wdr4900-v1: convert to mtdsplit image

Currently, the image creation process for the TP-Link tl-wdr4900-v1
needs a fixed sized kernel and places the rootfs partition at a
fixed offset. With the upcoming move to 4.19 the kernel will no
longer fit into the existing allocated space for the kernel
partition.

This patch converts the device to utilize the established
tplink,firmware mtdsplitter, which can deal with a dynamic
kernel/rootfs size.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agoath79: add support for devolo WiFi pro 1200i
David Bauer [Tue, 1 Jan 2019 18:17:23 +0000 (19:17 +0100)]
ath79: add support for devolo WiFi pro 1200i

Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoath79: add support for devolo WiFi pro 1750i
David Bauer [Tue, 1 Jan 2019 18:17:22 +0000 (19:17 +0100)]
ath79: add support for devolo WiFi pro 1750i

Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoramips: cleanup the RB750Gr3 support
Anton Arapov [Sat, 29 Dec 2018 00:28:27 +0000 (01:28 +0100)]
ramips: cleanup the RB750Gr3 support

Always enable the pwr led and use the usr led for boot status indication.

Rename nodes in the dts, to match what is recommend in the devicetree
specification.

Increase the maximum spi frequency to 20MHz and drop the m25p,chunked-io
which isn't required on mt7621.

Use the BTN_0 keycode for the mode button. This board doesn't have any
wireless.

Use a more descriptive label for the reset button and the GPIO enabling
the usb vcc supply.

Use the beeper kernel module for the buzzer.

Fix the pinmux to switch only pins used as GPIOs to the GPIO function.
Add support for the PoE enable GPIO to the userspace. The PoE power
status can be read via GPIO7. Since OpenWrt doesn't have support for
reading inputs from userspace, prepare only the pinmux for the GPIO.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoramips: add RB750Gr3 native support
Anton Arapov [Sat, 29 Dec 2018 00:28:27 +0000 (01:28 +0100)]
ramips: add RB750Gr3 native support

This patch adds support of MikroTik RouterBOARD 750Gr3, without the need
to reflashing the bootloader.

Installation through RouterBoot follows the usual MikroTik method
https://openwrt.org/toh/mikrotik/common

Since the image isn't compatible with RouterBOARD 750Gr3 installations
which have replaced the bootloader, the former used userspace boardname
is not added to the SUPPORTED_DEVICES, to prevent a brick while trying
to upgrade to the image with native support.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agobusybox: Add ALTERNATIVES for findutils
Daniel F. Dickinson [Wed, 2 Jan 2019 10:55:30 +0000 (05:55 -0500)]
busybox: Add ALTERNATIVES for findutils

Currently busybox find and xargs conflict with the versions from
findutils package.  Fix this by using ALTERNATIVES in busybox
and the related findutils (from packages feed) commit.

The conflict is due to the binaries being in the the same place
in rootfs and opkg not being happy about that.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
5 years agokernel: Fix kmod-w1 dependency on hwmon-core for 4.19
Petr Štetiar [Tue, 18 Dec 2018 10:07:28 +0000 (11:07 +0100)]
kernel: Fix kmod-w1 dependency on hwmon-core for 4.19

kmod-w1 depends on kmod-hwmon-core since Linux 4.14

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agokernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19
Petr Štetiar [Tue, 18 Dec 2018 10:08:16 +0000 (11:08 +0100)]
kernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19

It seems, that since Linux 4.18-rc1 rtc-ds1307 depends on hwmon-core.

 commit 6b583a64fd1e019fd01626b46892ebf2361951c5
 Author: Heiner Kallweit <hkallweit1@gmail.com>
 Date:   Wed Sep 27 22:41:26 2017 +0200

    rtc: ds1307: simplify hwmon config

    We don't have to define an extra config symbol, IS_REACHABLE does
    what we need. And having this config symbol just to save the few
    bytes of hwmon support on non-DS3231 chips isn't worth it IMO
    (especially as the symbol is set per default).

While at it, use the same dependency check for `kmod-regmap` as well, so
it's future proof as well.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agofirewall: update to latest git HEAD
Hans Dedecker [Thu, 3 Jan 2019 16:04:52 +0000 (17:04 +0100)]
firewall: update to latest git HEAD

70f8785 zones: add zone identifying local traffic in raw OUTPUT chain
6920de7 utils: Free args in __fw3_command_pipe()
6ba9105 options: redirects: Fix possible buffer overflows

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoath79: merge cases in 02_network
Paul Wassi [Wed, 2 Jan 2019 12:23:51 +0000 (13:23 +0100)]
ath79: merge cases in 02_network

Merge some duplicate cases in /etc/board.d/02_network

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agobuild: Drop user/group ID/name from sysupgrade.tar
Sven Eckelmann [Thu, 6 Dec 2018 10:23:00 +0000 (11:23 +0100)]
build: Drop user/group ID/name from sysupgrade.tar

Tar will automatically record the user/group ID and name for
files/directories. This reduces the reproducibility of the sysupgrade.tar
because most of the people don't use the same username as the OpenWrt
buildserver.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 years agobuild: Use stable file ordering in sysupgrade.tar
Sven Eckelmann [Thu, 6 Dec 2018 10:09:18 +0000 (11:09 +0100)]
build: Use stable file ordering in sysupgrade.tar

The file ordering in the current sysupgrade depends on the order of file in
a filesystem. This is often already in a sane (alphabetical order) but this
is not always the case. For example, the OpenWrt build servers return a
different ordering.

This breaks the reproducibility of the sysupgrade tarballs significantly
and also resulted in images which cannot be used for upgrades on devices
like the OpenMesh A42/A62.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 years agouboot-envtools: Add domywifi dw33d support
shanpo [Fri, 21 Dec 2018 05:11:17 +0000 (13:11 +0800)]
uboot-envtools: Add domywifi dw33d support

Signed-off-by: shanpo <jwdsccd@gmail.com>
5 years agouboot-envtools: ipq40xx: Configuration for GL.iNet GL-B1300
Ibrahim Tachijian [Wed, 10 Oct 2018 09:50:53 +0000 (11:50 +0200)]
uboot-envtools: ipq40xx: Configuration for GL.iNet GL-B1300

This commit adds the nescessary settings to allow reading the uboot environment variables on the GL.iNet GL-B1300 board.

Signed-off-by: Ibrahim Tachijian <barhom@netsat.se>
5 years agox86: enable kmod-bnx2 on 64-bit by default
Alberto Bursi [Sun, 23 Dec 2018 05:41:39 +0000 (06:41 +0100)]
x86: enable kmod-bnx2 on 64-bit by default

Gigabit ethernet adapters using BCM5706/5708/5709/5716 chipset are
common on servers and as easy/cheap to get as Intel based ones.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
5 years agokernel: mtd: add support for EN25QH64 in spi-nor.c
Roger Pueyo Centelles [Mon, 24 Dec 2018 14:39:32 +0000 (15:39 +0100)]
kernel: mtd: add support for EN25QH64 in spi-nor.c

The Eon EN25QH64 is a 64 Mbit SPI NOR flash memory chip. Its 32, 128 and
256 Mbits siblings are supported upstream but this particular size wasn't.
This commit includes patches for kernels 4.14 and 4.19.

Tested on a COMFAST CF-E120A v3 (ath79).

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
5 years agohostapd: update to version 2018-12-02 (2.7)
Hauke Mehrtens [Mon, 10 Dec 2018 22:13:42 +0000 (23:13 +0100)]
hostapd: update to version 2018-12-02 (2.7)

This updates hostapd to version the git version from 2018-12-02 which
matches the 2.7 release.

The removed patches were are already available in the upstream code, one
additional backport is needed to fix a compile problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agofstools: update to the latest master branch
Rafał Miłecki [Wed, 2 Jan 2019 06:13:19 +0000 (07:13 +0100)]
fstools: update to the latest master branch

This is a big block(d) cleanup with new feature of generating "mount"
hotplug.d events.

It's an important update for those who were using mountd in the
pre-18.06 releases. Due to the mountd being replaced with blockd a
support for "mountd" hotplug.d events has been lost. It broke all kind
of shell scripts that were e.g. managing services depending on an
external USB drive availability.

This basically (re-)adds support for calling /etc/hotplug.d/mount/
scripts with ACTION ("add" or "remove") and DEVICE set.

af93f4b block(d): improve hotplug.d "mount" events for the autofs
3bb3352 blockd: unmount device explicitly when it disappears
28753b3 block: remove target directory after unmounting
c8c7ca5 block: cleanup handling "start" action of the "autofs" command
f1bb762 block: make blockd_notify() return an int instead of void
71c2bde block: generate hotplug.d mount events
30f5096 block: validate amount of arguments for the "autofs" command
dc6a462 blockd: don't reparse blob msg in the vlist callbacks
f6a9686 blockd: don't unmount device when removing it from the list
1913fea block: don't duplicate unmounting code in the mount_action()
6b445fa block: make umount_device() function more generic
a778468 block: don't duplicate mounting code in the mount_device()
5dc631d block: simplify code picking mount target directory
2971779 block: move blockd_notify() call out of the conditional blocks
b86bd6e block: fix formatting & indent in the mount_device()
e12c0d6 fstools: use EXIT_FAILURE when indicating error on exit
091aa3d fstools: guard usage of WEXITSTATUS

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agoglibc: update to latest 2.27 commit (BZ #24027, BZ #23927)
Hans Dedecker [Tue, 1 Jan 2019 14:30:28 +0000 (15:30 +0100)]
glibc: update to latest 2.27 commit (BZ #24027, BZ #23927)

3981fc3453 malloc: Always call memcpy in _int_realloc [BZ #24027]
f6d0e8c36f Fix rwlock stall with PREFER_WRITER_NONRECURSIVE_NP (bug 23861)
2794474c65 powerpc: Add missing CFI register information (bug #23614)
d8ca7a0c71 Fix _dl_profile_fixup data-dependency issue (Bug 23690)
f1e211096b inet/tst-if_index-long: New test case for CVE-2018-19591 [BZ #23927]
4e9f34e54f support: Implement <support/descriptors.h> to track file descriptors
e75481a7a7 support: Close original descriptors in support_capture_subprocess
0f79dc0be3 support_quote_string: Do not use str parameter name
6b2dd53aa0 support: Implement support_quote_string
50477165b9 malloc: Add another test for tcache double free check.
4b246928bd malloc: tcache double free check

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoath79: align GL-AR750S boardname to other GL.iNet devices
Christoph Krapp [Tue, 1 Jan 2019 12:03:20 +0000 (12:03 +0000)]
ath79: align GL-AR750S boardname to other GL.iNet devices

As the official device name is GL-AR750S, rename the board accordingly.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
5 years agoapm821xx: sata: boot-part feature integration
Christian Lamparter [Thu, 27 Dec 2018 18:12:23 +0000 (19:12 +0100)]
apm821xx: sata: boot-part feature integration

This patch adds the boot-part feature to the apm82181 sata target.
This makes it possible to configure the boot partition size with
the generic CONFIG_TARGET_KERNEL_PARTSIZE symbol.

Please note: For people using custom images: Just like with
CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause
sysupgrade to repartition the device!

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoapm821xx: use bin file extension for sysupgrade-tar images
Christian Lamparter [Thu, 27 Dec 2018 22:02:18 +0000 (23:02 +0100)]
apm821xx: use bin file extension for sysupgrade-tar images

Use the file extension bin for sysupgrade-tar images with
metadata to unify the file extension across the target/tree.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoapm821xx: utilize build ARTIFACTs
Christian Lamparter [Thu, 27 Dec 2018 21:56:08 +0000 (22:56 +0100)]
apm821xx: utilize build ARTIFACTs

The exported kernel dtbs can be build as artifacts.
This way, the MyBook Live's DTB is not generated twice.

While at it, give the artifacts their proper name.
For the wndr4700 use the "device-tree" partition name and
for the MyBook Live: "apollo3g.dtb" to match the mbl_boot.scr.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoipq806x: add support for Buffalo WXR-2533DHP
INAGAKI Hiroshi [Mon, 24 Dec 2018 06:20:25 +0000 (15:20 +0900)]
ipq806x: add support for Buffalo WXR-2533DHP

Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.

The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.

specifications:

- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
  - J3: Vcc, GND, TX, RX from USB port side
  - 115200n8

Boot instructions for the initramfs image:

1. Prepare the TFTP server with the initramfs image renamed to
   "wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
   The WXR-2533DHP will grab the image from TFTP server and will boot it.

Flashing instructions:

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
5 years agobase-files: allow non-standard rootfs volume name in UBI in sysupgrade
INAGAKI Hiroshi [Tue, 1 Jan 2019 00:15:34 +0000 (09:15 +0900)]
base-files: allow non-standard rootfs volume name in UBI in sysupgrade

This commit allows to use non-standard UBI volume name as the rootfs
volume in sysupgrade.

ex.:
  The U-Boot on Buffalo WXR-2533DHP checks existence and checksum of
  "ubi_rootfs" volume when booting, so this name is required.

OpenWrt currently provides several patches:

490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
491-ubi-auto-create-ubiblock-device-for-rootfs.patch
492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch

to facilitate ubi rootfs automount. However the upstream kernel
also supports the means of booting from a fully custom ubi
partition name and ubi volume name via bootargs/kernel's cmdline
parameters:

ubi.mtd=mtd_partition_name
ubi.block=rootfs_volume_name
root=/dev/ubiblock$X_$Y

For more information and examples visit the wiki over at linux-mtd:
<http://www.linux-mtd.infradead.org/faq/ubifs.html>
<http://www.linux-mtd.infradead.org/doc/ubi.html>

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agoipq806x: add ramdisk feature
INAGAKI Hiroshi [Sun, 30 Dec 2018 03:01:41 +0000 (12:01 +0900)]
ipq806x: add ramdisk feature

This commits adds the "ramdisk" feature to ipq806x target. The
main driving force behind this decision is to facilitate the
installation of OpenWrt on some locked IPQ806x devices.

Examples:

- NEC Aterm WG2600HP

  The U-Boot on WG2600HP is protected with a password which prevents
  users from gaining access to the u-boot prompt in order to install
  the images from there.

  Therefore, on this device, installing OpenWrt by the user involves
  changing the bootcmd as follows so that WG2600HP downloads and
  executes initramfs image from TFTP server.

  ex.:
    bootcmd="ping ${serverip} && tftpboot 0x44000000 wg2600hp-initramfs.bin; bootipq"

- Buffalo WXR-2533DHP

  The U-Boot on WXR-2533DHP has built-in firmware recovery mode.
  It's activated by holding the "AOSS" button during boot. This
  will trigger the device to download the firmware from an TFTP
  server and booting from it. By using this, the user  can the
  install OpenWrt firmware without having access to the UART
  console.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
5 years agokernel: Add missing symbols to 4.19
Christian Lamparter [Sat, 29 Dec 2018 20:05:09 +0000 (21:05 +0100)]
kernel: Add missing symbols to 4.19

Tested with apm82181 and ipq40xx minimal image versions.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agobusybox: update to 1.30.0
Hannu Nyman [Mon, 31 Dec 2018 13:29:50 +0000 (15:29 +0200)]
busybox: update to 1.30.0

Update busybox to 1.30.0.
Refresh patches.
Leave new features disabled by default.

Config refreshed via:

  cd package/utils/busybox/config/
  ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0

  make package/busybox/compile

  cd package/utils/busybox
  ./convert_defaults.pl < ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
5 years agoath79: fix case statement in 01_leds
Paul Wassi [Tue, 1 Jan 2019 00:35:17 +0000 (01:35 +0100)]
ath79: fix case statement in 01_leds

Fix a missing 'end-of-case' recently introduced in 01_leds

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: rework elecom-header recipe
Mathias Kresin [Mon, 31 Dec 2018 15:41:07 +0000 (16:41 +0100)]
ath79: rework elecom-header recipe

Replace the code with a more readable version. Rename the recipe
to reflect the real usecase.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agotreewide: fix spaces vs. tabs
Paul Wassi [Mon, 31 Dec 2018 15:15:06 +0000 (16:15 +0100)]
treewide: fix spaces vs. tabs

Fix spaces vs. tabs issues in ath79 and ramips.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: tweak the position of factory partition for wr818
Rosy Song [Fri, 7 Dec 2018 03:41:57 +0000 (11:41 +0800)]
ath79: tweak the position of factory partition for wr818

The 'factory' partition will move to 0x50000-0x60000 in 2019. As
the webserver in bootloader is compatible with different mtdlayout,
all the users still can upgrade firmware whatever on ath79 or ar71xx.

Signed-off-by: Rosy Song <rosysong@rosinson.com>
5 years agoath79: add support for COMFAST CF-E110N
Roger Pueyo Centelles [Mon, 10 Dec 2018 14:44:56 +0000 (15:44 +0100)]
ath79: add support for COMFAST CF-E110N

This patch adds support for the COMFAST CF-E110N, an outdoor wireless
CPE with two Ethernet ports and a 802.11bgn radio.

Specifications:

 - 650/400/216 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, both with PoE-in support
 - 64 MB of RAM (DDR2)
 - 16 MB of FLASH
 - 2T2R 2.4 GHz, up to 26 dBm
 - 11 dBi built-in antenna
 - POWER/LAN/WAN/WLAN green LEDs
 - 4x RSSI LEDs (2x red, 2x green)
 - UART (115200 8N1) and GPIO (J9) headers on PCB

Flashing instructions:

 The original firmware is based on OpenWrt so a sysupgrade image can be
 installed via the stock web GUI. Settings from the original firmware
 will be saved and restored on the new want, so a factory reset will be
 needed: once the new firmware is flashed, perform the factory reset by
 pushing the reset button several times during the boot process, while the
 WAN LED flashes, until it starts flashing quicker.

 The U-boot bootloader contains a recovery HTTP server to upload the
 firmware. Push the reset button while powering the device on and keep it
 pressed for >10 seconds. The recovery page will be at http://192.168.1.1

Notes:

 The device is advertised, sold and labeled as "CF-E110N", but the
 bootloader and the stock firmware identify it as "v2".

Acknowledgments:

 Petr Štetiar <ynezz@true.cz>
 Sebastian Kemper <sebastian_ml@gmx.net>
 Chuanhong Guo <gch981213@gmail.com>

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[drop unused labels from devicetree source file]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoath79: add support for TP-Link Archer C6 v2
Georgi Vlaev [Fri, 28 Dec 2018 08:24:01 +0000 (10:24 +0200)]
ath79: add support for TP-Link Archer C6 v2

This patch adds support for TP-Link Archer C6 v2 (EU)

Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

Flash instructions:

Upload
openwrt-ath79-generic-tplink_archer-c6-v2-squashfs-factory.bin
via the router Web interface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the router
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the
   tftp root directory renamed to ArcherC6v2_tp_recovery.bin.
4. Connect power cable to router, press and hold the reset
   button and turn the router on
5. Keep the reset button pressed until the WPS LED lights up
6. Wait ~150 seconds to complete flashing

According to the GPL source the non-EU variant has different
GPIOs assigned to some of the LEDs and buttons. The flash
layout might be different as well. The wikidevi entry for
Archer A6/C6 assumes they are identical.

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
5 years agoath79: add support for EnGenius EWS511AP
Guan-Hong Lin [Tue, 18 Dec 2018 08:35:30 +0000 (16:35 +0800)]
ath79: add support for EnGenius EWS511AP

EnGenius EWS511AP is a wireless managed wall AP with PoE support,
based on Qualcomm/Atheros QCA9531(Honeybee) + QCA9887.

Short specification:

- 128MB of RAM
- 16 MB of SPI FLASH
- 2T2R 2.4 GHz (QCA9531), 802.11b/g/n
- 1T1R 5 GHz (QCA9887), 802.11ac/n/a
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x Power LED, 2x LAN LEDs, 1x WLAN 2.4G LED, 1x WLAN 5G LED
- 1x RESET button
- built-in watchdog chipset

Flash instruction:

From EnGenius firmware to OpenWrt firmware:

Original firmware is based on QSDK.
Use sysupgrade firmware directly in vendor GUI.
Reset to factory default is necessary.

From OpenWrt firmware to EnGenius firmware:

1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
   Put the OpenWrt firmware in the root directory on your computer.
2. Power up EWS511AP. Press 4 and then press any key to enter u-boot.
3. Download OpenWrt firmware
   (ath)> tftpboot 0x80060000 ${dir}"openwrt-ath79-generic-engenius_ews511ap-squashfs-sysupgrade.bin"
4. Flash the firmware
   (ath)> erase 0x9f060000 +f50000
   (ath)> cp.b $fileaddr 0x9f060000 $filesize
5. Reboot
   (ath)> reset

Signed-off-by: Guan-Hong Lin <GH.Lin@senao.com>
5 years agoath79: add status LED on GL.iNet AR300M
Paul Wassi [Mon, 31 Dec 2018 12:59:31 +0000 (13:59 +0100)]
ath79: add status LED on GL.iNet AR300M

This adds the triggers for the status LED of this device.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: fix boardname of GL.iNet GL-AR300M
Paul Wassi [Mon, 31 Dec 2018 12:45:29 +0000 (13:45 +0100)]
ath79: fix boardname of GL.iNet GL-AR300M

This device is called GL-AR300M, therefore rename the board(s)
to 'gl-ar300m-nor' and 'gl-ar300m-nand'

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[change boardname in uboot envtools as well, don't use wildcards for
boardname]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoath79: Add support for TP-Link WR810N
Paul Wassi [Fri, 28 Dec 2018 23:45:22 +0000 (00:45 +0100)]
ath79: Add support for TP-Link WR810N

Device specifications given in b23b0fb28b760ce66a8f93d4681c8bd300d75d30

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: Add GL.iNet AR150 LED triggers
Paul Wassi [Mon, 31 Dec 2018 12:13:14 +0000 (13:13 +0100)]
ath79: Add GL.iNet AR150 LED triggers

When switching from ar71xx to ath79 the default netdev LED
triggers for LAN and WAN got lost.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: fix boardname of GL.iNet GL-AR150
Paul Wassi [Sun, 30 Dec 2018 20:37:50 +0000 (21:37 +0100)]
ath79: fix boardname of GL.iNet GL-AR150

This device is called GL-AR150, therefore rename the board
to 'gl-ar150'

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: add support for ELECOM WRC-1750GHBK2-I/C
INAGAKI Hiroshi [Sat, 29 Dec 2018 15:55:35 +0000 (00:55 +0900)]
ath79: add support for ELECOM WRC-1750GHBK2-I/C

ELECOM WRC-1750GHBK2-I/WRC-1750GHBK2-C are 2.4/5 GHz band 11ac
routers, based on Qualcomm Atheros QCA9563.

This commit also includes small fix; use "0x0x03000101" as pll_1000
instead of "0x03000000".

Specification:

- SoC:      Qualcom Atheros QCA9563
- RAM:      128 MB (DDR2)
- Flash:    16 MB (SPI-NOR)
- WLAN:     2.4/5 GHz
  - 2.4 GHz: 2T2R (SoC internal)
  - 5 GHz:   3T3R (QCA9880)
- Ethernet: 10/100/1000 Mbps
- LED/key:  4x/3x (2x buttons, 1x slide-switch)
- UART:     through-hole on PCB
  - Vcc, RX, GND, TX from switch (QCA8337N) side
  - 115200n8

Flash instruction using factory image:

1. Boot WRC-1750GHBK2-I/C normaly
2. Access to "http://192.168.2.1/" and open firmware upgrade page
("ファームウェア更新 手動更新(アップデート)")
3. Select the OpenWrt factory image and click apply ("適用") button
to perform firmware update
4. On the (initramfs) factory image, perform sysupgrade with
squashfs-sysupgrade image
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
5 years agoath79: Fix UBNT Unifi AC LEDs
Paul Wassi [Sun, 30 Dec 2018 21:41:55 +0000 (22:41 +0100)]
ath79: Fix UBNT Unifi AC LEDs

Both LEDs on these devices are ACTIVE_HIGH, change back to what
it is on ar71xx.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: Fix system LED on TP-Link WR740/741 v4
Paul Wassi [Mon, 31 Dec 2018 10:58:16 +0000 (11:58 +0100)]
ath79: Fix system LED on TP-Link WR740/741 v4

The system LED on these devices is ACTIVE_LOW, change back to what
it is on ar71xx.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years agoath79: add support for TP-Link TL-WR841N/ND v8
Antonio Silverio [Wed, 17 Oct 2018 07:18:45 +0000 (09:18 +0200)]
ath79: add support for TP-Link TL-WR841N/ND v8

CPU: Atheros AR9341 535MHz
RAM: 32MB
FLASH: 4MiB
PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan
WiFi: Atheros AR9341 2x2:2 bgn
LED: Power (static on), LAN (controlled by Switch), WAN, SYS, WiFi, RFKill
BTN: WPS, WiFi, Reset

Installation:
Upload the factory image via the vendor-GUI.

Signed-off-by: Antonio Silverio <menion@gmail.com>
[resolve merge conflicts, squash commits, fix commit title, remove
default default off led properties, mark sysupgrade image compatible
with the ar71xx version of the board, drop blank lines from dts]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoath79: use caldata patching for Archer C58/C59
David Bauer [Sun, 30 Dec 2018 21:28:42 +0000 (22:28 +0100)]
ath79: use caldata patching for Archer C58/C59

With this commit the TP-Link Archer C58 and Archer C59 use caldata
patching in order to set the correct 5GHz MAC-address.

Tested on TP-Link Archer C59 v1.

For more details see commit 330965b.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoath79: add support for GL.iNet GL-AR750S
Christoph Krapp [Sun, 30 Dec 2018 16:36:22 +0000 (16:36 +0000)]
ath79: add support for GL.iNet GL-AR750S

Right now this patch adds nor image generation only. NAND image
generation is not supportet at the moment.

Furtheremore support for the MicroSD port is not implemented as of now.

Specification:
- SOC: QCA9563 (775MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 2x 1Gbps LAN + 1x 1Gbps WAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x switch button, 1x reset button
- LED: 3x LEDS (green)
  - Another LED can be accessed on GPIO 7 if soldered

Flash instruction:
- Set static ip to 192.168.1.2
- Unplug the power cord
- Hold reset button
- Plug power back in
- Right led will flash 5 times
- Release reset button
- Browse to 192.168.1.1
- Choose sysupgrade image in NOR-flash section
- Press "update nor firmware"
- After successful transfer unplug network cable before device restarts

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[resolve merge conflicts, rename buttons, use switch input type for mode
switch]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoiwinfo: fix PKG_MIRROR_HASH
Mathias Kresin [Sun, 30 Dec 2018 19:16:55 +0000 (20:16 +0100)]
iwinfo: fix PKG_MIRROR_HASH

The PKG_MIRROR_HASH was for some reason wrong.

Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoath79: fix OCEDO Koala ethernet configuration
David Bauer [Sat, 29 Dec 2018 22:31:19 +0000 (23:31 +0100)]
ath79: fix OCEDO Koala ethernet configuration

The OCEDO Koala has incorrect PLL settings which result in ~3% packet
loss on ethernet connections.

Also omit the gmac-configuration as it's incorrect too.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoath79: add support for D-Link DIR-859 A1
Weijie Gao [Sat, 29 Dec 2018 09:22:32 +0000 (17:22 +0800)]
ath79: add support for D-Link DIR-859 A1

Hardware spec of DIR-859 A1:
SoC: QCA9563
DRAM: 64MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9880

USB is supported on the PCB but not connected.

Flash instructions:

1. Upgrade the factory.bin through the factory web interface or the u-boot
   failsafe interface.
   The firmware will boot up correctly for the first time.
   Do not power off the device after OpenWrt has booted. Otherwise the u-boot
   will enter failsafe mode as the checksum of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
   After upgrading completes the u-boot won't complain about the firmware
   checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin, just
   upgrade the factory.bin through the u-boot failsafe interface and then goto
   step 2.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
[squash commits, use common seama recipes, sync factory image recipe
with ramips version]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agobuild: move seama commands to image-commands.mk
Mathias Kresin [Sat, 29 Dec 2018 19:06:56 +0000 (20:06 +0100)]
build: move seama commands to image-commands.mk

Move it to image-commands.mk to get rid of duplicate recipes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoar71xx: sync seama image build code with ramips
Mathias Kresin [Sat, 29 Dec 2018 18:40:56 +0000 (19:40 +0100)]
ar71xx: sync seama image build code with ramips

Use the same syntax as used in the ramips target, to use common seama
recipes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoramips: consolidate seama image build code
Mathias Kresin [Sat, 29 Dec 2018 18:25:00 +0000 (19:25 +0100)]
ramips: consolidate seama image build code

Create a common template which has the required image build code
defined. Add some new variables to pass individual parts to the seama
recipes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoopkg: drop argument from check_signature in opkg.conf
Jonas Gorski [Mon, 10 Sep 2018 09:42:53 +0000 (11:42 +0200)]
opkg: drop argument from check_signature in opkg.conf

check_signature is a bool option and doesn't take any arguments. The
presence of the 1 falsely suggests setting it to 0 disables the check,
while the option actually needs to be removed or commented out to be
disabled. So remove the argument to make it more clear.

Fixes: beca028bd6bb ("build: add integration for managing opkg package feed keys")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agobrcm63xx: remove broken DSP platform device code
Jonas Gorski [Wed, 19 Dec 2018 23:02:31 +0000 (00:02 +0100)]
brcm63xx: remove broken DSP platform device code

There is no driver and it crashes the kernel, so just remove it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agobrcm63xx: fix bcm6348 pinmux group selection
Jonas Gorski [Wed, 19 Dec 2018 23:05:15 +0000 (00:05 +0100)]
brcm63xx: fix bcm6348 pinmux group selection

The mask/shift computation used the pin group number instead of the pin
number, resulting in always modifying group 4 when applying muxes, so
fix it to consistently use the pin number.

Fixes: 0755c2d11706 ("brcm63xx: add pinctrl support")
Reported-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agobrcm63xx: VH4032N: add the SPROM fixups
Daniel Gonzalez Cabanelas [Wed, 14 Nov 2018 00:48:15 +0000 (01:48 +0100)]
brcm63xx: VH4032N: add the SPROM fixups

Add the SPROM fixups for the onboard BCM43222 wifi on the Observa
VH4032N

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
5 years agobrcm63xx: fix gpio hogs on gpio/pinctrl nodes
Jonas Gorski [Mon, 19 Feb 2018 09:18:06 +0000 (10:18 +0100)]
brcm63xx: fix gpio hogs on gpio/pinctrl nodes

Work around a chicken/egg issue in registration of dual gpio/pinctrl
nodes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agobrcm63xx: rename switch core reset patch to 0xx as it has been accepted
Jonas Gorski [Tue, 18 Dec 2018 09:42:40 +0000 (10:42 +0100)]
brcm63xx: rename switch core reset patch to 0xx as it has been accepted

The core reset fix was accepted upstream, so move it to its right place.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agotools/cmake: update to 3.13.2
Hans Dedecker [Sat, 29 Dec 2018 16:27:20 +0000 (17:27 +0100)]
tools/cmake: update to 3.13.2

Update to the latest stable version and refresh patches; see
https://cmake.org/cmake/help/v3.13/release/3.13.html for the latest
changes in 3.13.x

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoath79: Fix wrong TL-WR740N v4 switch port order
Eduardo Barros [Tue, 25 Dec 2018 23:20:03 +0000 (23:20 +0000)]
ath79: Fix wrong TL-WR740N v4 switch port order

Fix the switch port order to have the correct order in LuCI.

Fixes: FS#1469
Signed-off-by: Eduardo Barros <geadas@gmail.com>
[trim commit title, add a proper commit message, add fixes tag, keep
alphabetical order of the blocks]
Signed-off-by: Mathias Kresin <dev@kresin.me>
5 years agoomcproxy: optimize interface triggers
Hans Dedecker [Sat, 29 Dec 2018 14:56:39 +0000 (15:56 +0100)]
omcproxy: optimize interface triggers

Before installing an interface triggger check if an interface
trigger for the interface is already in place.
This avoids installing identical interface triggers for a given
interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>