openwrt/staging/luka.git
8 years agokernel: crypto: add fsl CAAM package
John Crispin [Thu, 25 Feb 2016 10:14:24 +0000 (10:14 +0000)]
kernel: crypto: add fsl CAAM package

Kernel package enables the Freescale CAAM (crypto accelerator and assurance
module, aka SEC4). Sets kernel defaults for ringsize, intc, and debug.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48773

8 years agoramips: mt7620: fix failsafe switch config
John Crispin [Thu, 25 Feb 2016 10:14:22 +0000 (10:14 +0000)]
ramips: mt7620: fix failsafe switch config

As indicated in the bug tracker[1], failsafe mode is broken on at least some
devices using the mt7620 switch (and possibly mt7621). The thread explicitly
mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device
using the mt7621 switch; the issue also applies to the Netgear EX2700.

The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1
by the switch driver. Connecting to and/or pinging the device fails. This patch
fixes the failsafe preinit config, by making sure that vlan support is disabled.
It currently only fixes the switch config on mt7620, but might apply to the
mt7621 as well, so the patch has been designed with this in mind.

A similar (line wrapped) patch was submitted in December by Simon Peter, but never
accepted and/or discussed.

This patch applies to both Chaos Calmer and trunk.

[1] https://dev.openwrt.org/ticket/18768

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
SVN-Revision: 48772

8 years agoramips: build factory images for Netgear EX2700
John Crispin [Thu, 25 Feb 2016 10:14:19 +0000 (10:14 +0000)]
ramips: build factory images for Netgear EX2700

This patch adds support for building factory and sysupgrade images
for the Netgear EX2700 that don't require modification of u-boot
environment variables.

The bootloader on this device expects the kernel partition to end
on a 64k block boundary. The last 64 byte of the kernel partition
must contain a valid uImage header - in the stock firmware, this is
the uImage header of the root filesystem. For this patch, we're using
the uImage header of a 0 byte partition (ex2700-fakeroot.uImage).

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
SVN-Revision: 48771

8 years agoleds: support oneshot as well as timer triggers
John Crispin [Thu, 25 Feb 2016 10:14:16 +0000 (10:14 +0000)]
leds: support oneshot as well as timer triggers

oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>
SVN-Revision: 48770

8 years agoar71xx: correct imagename for TPlink WA730RE
John Crispin [Thu, 25 Feb 2016 10:14:13 +0000 (10:14 +0000)]
ar71xx: correct imagename for TPlink WA730RE

- insert missing "-" to separate model and version

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
SVN-Revision: 48769

8 years agoar71xx: correct imagename for TPlink WA701ND
John Crispin [Thu, 25 Feb 2016 10:14:11 +0000 (10:14 +0000)]
ar71xx: correct imagename for TPlink WA701ND

- it seems there was never a 701N-model build

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
SVN-Revision: 48768

8 years agoar71xx: matchup of TPlink WR841N(D)-names
John Crispin [Thu, 25 Feb 2016 10:14:08 +0000 (10:14 +0000)]
ar71xx: matchup of TPlink WR841N(D)-names

- remove the suffix (N, ND) to indicate that the image is for all
  WR841-models
- some of these models have a "N"-suffix, others have (ND)-suffix,
  but the boards are the same - only difference is the detachable
  antenna on "D"-models
- discussed this idea to remove the suffix in IRC with jow and Borromini

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
SVN-Revision: 48767

8 years agobrcm2708: remove linux 4.1 support
John Crispin [Thu, 25 Feb 2016 10:14:05 +0000 (10:14 +0000)]
brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 48766

8 years agobrcm2708: switch to linux 4.4 and update patches
John Crispin [Thu, 25 Feb 2016 10:14:01 +0000 (10:14 +0000)]
brcm2708: switch to linux 4.4 and update patches

As usual these patches were extracted from:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 48765

8 years agouboot-oxnas: fix typo leading to tool not being built
John Crispin [Thu, 25 Feb 2016 10:13:53 +0000 (10:13 +0000)]
uboot-oxnas: fix typo leading to tool not being built

Fixes #21907

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 48764

8 years agoltq-vdsl-app: Enable T1.413 in Annex A xTSE set
John Crispin [Thu, 25 Feb 2016 10:13:51 +0000 (10:13 +0000)]
ltq-vdsl-app: Enable T1.413 in Annex A xTSE set

Before r47933 Bit 1 (first bit) of xTSE Octet 1 (first octet) defaulted
to 1, which allowed T1.413 to operate.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
SVN-Revision: 48763

8 years agomusl: update to version 1.1.14
Felix Fietkau [Thu, 25 Feb 2016 09:24:46 +0000 (09:24 +0000)]
musl: update to version 1.1.14

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48762

8 years agodnsmasq: export tftp root to the procd jail
Felix Fietkau [Thu, 25 Feb 2016 09:24:31 +0000 (09:24 +0000)]
dnsmasq: export tftp root to the procd jail

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48761

8 years agodnsmasq: only enable tftp if the tftp root exists
Felix Fietkau [Thu, 25 Feb 2016 09:24:24 +0000 (09:24 +0000)]
dnsmasq: only enable tftp if the tftp root exists

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48760

8 years agomac80211: fix an RTS/CTS issue in minstrel_ht
Felix Fietkau [Thu, 25 Feb 2016 09:24:13 +0000 (09:24 +0000)]
mac80211: fix an RTS/CTS issue in minstrel_ht

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48759

8 years agomac80211: sync a-msdu tx patch with the latest upstream submission
Felix Fietkau [Thu, 25 Feb 2016 09:24:09 +0000 (09:24 +0000)]
mac80211: sync a-msdu tx patch with the latest upstream submission

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48758

8 years agosunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac to banana...
Zoltan Herpai [Wed, 24 Feb 2016 23:31:48 +0000 (23:31 +0000)]
sunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac to bananapro profile

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48757

8 years agokernel: replace bgmac patches for BCM47094 with final ones
Rafał Miłecki [Wed, 24 Feb 2016 22:43:43 +0000 (22:43 +0000)]
kernel: replace bgmac patches for BCM47094 with final ones

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48756

8 years agokernel: mtdsplit: support uimage with UBI
Rafał Miłecki [Wed, 24 Feb 2016 22:43:16 +0000 (22:43 +0000)]
kernel: mtdsplit: support uimage with UBI

This patch adds uimage firmware split support for ubi.

Signed-off-by: YounJae Rho <luxflow@live.com>
SVN-Revision: 48755

8 years agokernel: mtdsplit: add missing digest field to Seama header
Rafał Miłecki [Tue, 23 Feb 2016 14:40:40 +0000 (14:40 +0000)]
kernel: mtdsplit: add missing digest field to Seama header

Seama format has 2 similar headers: container (seal) header and entity
header. The first one has size always set to 0 and doesn't contain MD5
digest.

When dealing with Seama on a flash we deal directly with an entity. You
can see mtdsplit_parse_seama reads from offset 0 and expects entity to
be there. Seama container is used by bootloader / interface only which
extract entity out of it and flash it.

That said we should fix our header struct. This is important as we
calculate possible rootfs offset assuming it may be placed right after
Seama entity. So far calculate offset was always 16B too low.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48754

8 years agoar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issues
Felix Fietkau [Mon, 22 Feb 2016 15:11:23 +0000 (15:11 +0000)]
ar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48753

8 years agoustream-ssl: update to the latest version, fixes openssl TLS version selection
Felix Fietkau [Mon, 22 Feb 2016 08:54:46 +0000 (08:54 +0000)]
ustream-ssl: update to the latest version, fixes openssl TLS version selection

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48752

8 years agoramips: fix WSR-1166 partition table
Felix Fietkau [Mon, 22 Feb 2016 08:54:32 +0000 (08:54 +0000)]
ramips: fix WSR-1166 partition table

- Fix typo in board_data partition start address
- Increase board_data partition size in order to exploit all flash size

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
SVN-Revision: 48751

8 years agomac80211: add packages libertas-spi module and firmware
Felix Fietkau [Mon, 22 Feb 2016 08:54:08 +0000 (08:54 +0000)]
mac80211: add packages libertas-spi module and firmware

This adds option to build kernel module and firmware packages
for a Marvell 8686 SPI Wireless device

Signed-off-by: Joseph Honold <mozzwald@gmail.com>
SVN-Revision: 48750

8 years agoralink: fix mt7628 ehci support
John Crispin [Fri, 19 Feb 2016 16:38:04 +0000 (16:38 +0000)]
ralink: fix mt7628 ehci support

the u2_phy init was missing

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48747

8 years agoralink: unbreak port4 on mt7620
John Crispin [Fri, 19 Feb 2016 16:37:56 +0000 (16:37 +0000)]
ralink: unbreak port4 on mt7620

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48746

8 years agokernel: fix chainiv crypto modules in 4.3+ kernels
Steven Barth [Fri, 19 Feb 2016 11:49:03 +0000 (11:49 +0000)]
kernel: fix chainiv crypto modules in 4.3+ kernels

Signed-off-by: Steven Barth <cyrus@openwrt.org>
SVN-Revision: 48745

8 years agomac80211: set default aggregation timeout to 0 to improve stability
Felix Fietkau [Thu, 18 Feb 2016 18:55:46 +0000 (18:55 +0000)]
mac80211: set default aggregation timeout to 0 to improve stability

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48744

8 years agomac80211: update A-MSDU tx support to the latest version
Felix Fietkau [Thu, 18 Feb 2016 18:55:35 +0000 (18:55 +0000)]
mac80211: update A-MSDU tx support to the latest version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48743

8 years agoar71xx: add missing symbol to Linux 4.4 config (#21878)
Jo-Philipp Wich [Thu, 18 Feb 2016 12:09:34 +0000 (12:09 +0000)]
ar71xx: add missing symbol to Linux 4.4 config (#21878)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48742

8 years agoarchs38: remove network config override
John Crispin [Thu, 18 Feb 2016 08:35:21 +0000 (08:35 +0000)]
archs38: remove network config override

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48741

8 years agolinux: add support of Synopsys ARCHS38-based boards
John Crispin [Thu, 18 Feb 2016 08:22:32 +0000 (08:22 +0000)]
linux: add support of Synopsys ARCHS38-based boards

This patch introduces support of new boards with ARC HS38 cores.

ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:

 [1] Synopsys SDP board (AXS103)
     This is the same base-board as in AXS101 but with
     FPGA-based CPU-tile where ARCHs38 core is implemented.

 [2] nSIM
     Again this is the same simulation engine but configured for
     new instruction set and features of new CPU.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48740

8 years agotoolchain: add support of ARCv2 architecture
John Crispin [Thu, 18 Feb 2016 08:22:17 +0000 (08:22 +0000)]
toolchain: add support of ARCv2 architecture

This change adds support of ARC ISAv2 processors in
OpenWRT toolchain.

In general gcc for ARC may compile code for both ISA versions
simultaneously but libgcc will be built only for default
architecture that's why it's necessary to specify --with-cpu
on gcc configuration.

As for uClibc we need to use different configurations for
different ARC ISAs.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48739

8 years agolldp: Upgrade to 0.9.0
John Crispin [Thu, 18 Feb 2016 08:22:07 +0000 (08:22 +0000)]
lldp: Upgrade to 0.9.0

Signed-off-by: Ben Kelly <ben@benjii.net>
SVN-Revision: 48738

8 years agomvebu: add SolidRun ClearFog A1 support
Luka Perkov [Wed, 17 Feb 2016 17:49:26 +0000 (17:49 +0000)]
mvebu: add SolidRun ClearFog A1 support

Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
SVN-Revision: 48736

8 years agotoolchain: use latest glibc 2.21 and 2.22 revisions
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:49 +0000 (08:44 +0000)]
toolchain: use latest glibc 2.21 and 2.22 revisions

Refresh patches and rework Makefile to fetch glibc from release branches
instead of relying on tarballs.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48735

8 years agotoolchain: mark eglibc 2.19 broken
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:45 +0000 (08:44 +0000)]
toolchain: mark eglibc 2.19 broken

Upstream is dead and the last available version has multiple open CVEs.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48734

8 years agodownload.mk: fix packed checkout mirroring support
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:37 +0000 (08:44 +0000)]
download.mk: fix packed checkout mirroring support

Changeset r48416  broke the downloading of mirrored, packed scm checkouts.

Fix this by removing the "@" sign in front of the download command which is
now executed as part of a larger shell command under flock.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48733

8 years agobrcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after...
Felix Fietkau [Tue, 16 Feb 2016 21:42:00 +0000 (21:42 +0000)]
brcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after cleaning the kernel tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48732

8 years agogdb: fix powerpc build issues with musl
Felix Fietkau [Tue, 16 Feb 2016 21:30:20 +0000 (21:30 +0000)]
gdb: fix powerpc build issues with musl

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48731

8 years agokernel: add missing symbols to config-4.4
John Crispin [Tue, 16 Feb 2016 16:25:49 +0000 (16:25 +0000)]
kernel: add missing symbols to config-4.4

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48730

8 years agokernel: add mode backlight symbols
John Crispin [Tue, 16 Feb 2016 16:25:40 +0000 (16:25 +0000)]
kernel: add mode backlight symbols

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48729

8 years agokernel: add missing symbol to usb-audio
John Crispin [Tue, 16 Feb 2016 16:25:33 +0000 (16:25 +0000)]
kernel: add missing symbol to usb-audio

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48728

8 years agokernel: DSA is missing a OF dependend dep for mdio
John Crispin [Tue, 16 Feb 2016 16:25:25 +0000 (16:25 +0000)]
kernel: DSA is missing a OF dependend dep for mdio

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48727

8 years agoat91: udc driver was missing deps
John Crispin [Tue, 16 Feb 2016 16:25:16 +0000 (16:25 +0000)]
at91: udc driver was missing deps

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48726

8 years agomvebu: add missing symbols.
John Crispin [Tue, 16 Feb 2016 16:25:10 +0000 (16:25 +0000)]
mvebu: add missing symbols.

this broke full builds of the mvebu target

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48725

8 years agokernel: crypto-echainiv was missing deps
John Crispin [Tue, 16 Feb 2016 07:47:06 +0000 (07:47 +0000)]
kernel: crypto-echainiv was missing deps

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48724

8 years agokernel: add missing libphy dep to DSA
John Crispin [Mon, 15 Feb 2016 18:45:34 +0000 (18:45 +0000)]
kernel: add missing libphy dep to DSA

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48723

8 years agokernel: MPLS did not exist prior to v4.4
John Crispin [Mon, 15 Feb 2016 18:45:27 +0000 (18:45 +0000)]
kernel: MPLS did not exist prior to v4.4

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48722

8 years agoramips: Add support for Phicomm PSG1208
John Crispin [Mon, 15 Feb 2016 18:45:22 +0000 (18:45 +0000)]
ramips: Add support for Phicomm PSG1208

This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram.
The WPS led is uesd as status_led because the power light can't be controlled with GPIO.
It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
SVN-Revision: 48721

8 years agoperf: add dependency on !LINUX_3_18 to fix builds
Felix Fietkau [Mon, 15 Feb 2016 10:53:23 +0000 (10:53 +0000)]
perf: add dependency on !LINUX_3_18 to fix builds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48720

8 years agomac80211: fix a crash in monitor mode injection
Felix Fietkau [Sun, 14 Feb 2016 12:26:49 +0000 (12:26 +0000)]
mac80211: fix a crash in monitor mode injection

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48719

8 years agobuild: disable the use of -iremap for UML (#21851)
Felix Fietkau [Sat, 13 Feb 2016 22:23:32 +0000 (22:23 +0000)]
build: disable the use of -iremap for UML (#21851)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48718

8 years agoar71xx: add missing kernel symbol (#21849)
Jo-Philipp Wich [Fri, 12 Feb 2016 19:55:07 +0000 (19:55 +0000)]
ar71xx: add missing kernel symbol (#21849)

Also reorder subtarget kernel configs.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48717

8 years agobusybox: fix broken default for FEATURE_IP_ROUTE_DIR (#21845)
Jo-Philipp Wich [Fri, 12 Feb 2016 19:46:31 +0000 (19:46 +0000)]
busybox: fix broken default for FEATURE_IP_ROUTE_DIR (#21845)

Changeset r47775 introduced a wrong default value "n" for the ip applets
config search path, breaking the handling of named routing tables and other
objects having alias configurations.

Fix the issue by providing a proper default value aligned with the value
used by full iproute2.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48716

8 years agoramips: Support LEDs on D-Link DIR-860L B1
John Crispin [Fri, 12 Feb 2016 09:29:23 +0000 (09:29 +0000)]
ramips: Support LEDs on D-Link DIR-860L B1

Adds the required gpio definitions.

Signed-off-by: Johannes Wienke <languitar@semipol.de>
SVN-Revision: 48715

8 years agolinux/crypto: Add echainiv module provided by 4.4 kernels
John Crispin [Fri, 12 Feb 2016 08:31:54 +0000 (08:31 +0000)]
linux/crypto: Add echainiv module provided by 4.4 kernels

This module is needed for IPsec ESP support, i.e..

Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48714

8 years agokernel: add dsa driver support
John Crispin [Fri, 12 Feb 2016 08:31:49 +0000 (08:31 +0000)]
kernel: add dsa driver support

The Linux Distributed Switch Architecture drivers provide richer support than
the swconfig driver API in that each switch port gets its own interface which
allows protocols such as STP, LLDP, 802.1x etc.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48713

8 years agopackage/libs/gmp: update libgmp to 6.1.0
John Crispin [Fri, 12 Feb 2016 08:31:39 +0000 (08:31 +0000)]
package/libs/gmp: update libgmp to 6.1.0

Update also the library version of gmp to 6.1.0.
Switch download to use the GNU alias.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48712

8 years agoar71xx: Support for Ubiquiti UniFi AP AC LITE
John Crispin [Fri, 12 Feb 2016 08:31:32 +0000 (08:31 +0000)]
ar71xx: Support for Ubiquiti UniFi AP AC LITE

Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>
SVN-Revision: 48711

8 years agolinux/netsupport: Add support for MPLS protocol
John Crispin [Fri, 12 Feb 2016 08:31:17 +0000 (08:31 +0000)]
linux/netsupport: Add support for MPLS protocol

This adds support for MPLS protocol including usage of lightweight tunnels.
Kernel size of vmlinuz.bin grows by ~8k.

Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48710

8 years agopackage/devel/gdb: update to 7.10.1
John Crispin [Fri, 12 Feb 2016 08:31:11 +0000 (08:31 +0000)]
package/devel/gdb: update to 7.10.1

Minor bugfix update, released in Dec 2015
https://www.gnu.org/software/gdb/news/

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48709

8 years agotoolchain/gdb: update to 7.10.1
John Crispin [Fri, 12 Feb 2016 08:31:06 +0000 (08:31 +0000)]
toolchain/gdb: update to 7.10.1

Minor bugfix update, released in Dec 2015
https://www.gnu.org/software/gdb/news/

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48708

8 years agoutil-linux: Subpackage for blkdiscard
John Crispin [Fri, 12 Feb 2016 08:30:56 +0000 (08:30 +0000)]
util-linux: Subpackage for blkdiscard

Adding subpackage to make it possible to enable blkdiscard utility.

Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
SVN-Revision: 48707

8 years agoar71xx: Make code formatting consistent on ath79/machtypes.h
John Crispin [Fri, 12 Feb 2016 08:30:38 +0000 (08:30 +0000)]
ar71xx: Make code formatting consistent on ath79/machtypes.h

Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
SVN-Revision: 48706

8 years agoar71xx: Added support for TL-WA801NDv3
John Crispin [Fri, 12 Feb 2016 08:30:28 +0000 (08:30 +0000)]
ar71xx: Added support for TL-WA801NDv3

Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
SVN-Revision: 48705

8 years agovti: fix kmod dependencies
John Crispin [Fri, 12 Feb 2016 08:30:18 +0000 (08:30 +0000)]
vti: fix kmod dependencies

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48704

8 years agokernel/modules: add kmod-ip6-vti
John Crispin [Fri, 12 Feb 2016 08:30:09 +0000 (08:30 +0000)]
kernel/modules: add kmod-ip6-vti

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48703

8 years agokernel/modules: rename kmod-ipvti to kmod-ip-vti
John Crispin [Fri, 12 Feb 2016 08:30:00 +0000 (08:30 +0000)]
kernel/modules: rename kmod-ipvti to kmod-ip-vti

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48702

8 years agoar71xx: WNR2000v3: exclude USB modules from image
John Crispin [Fri, 12 Feb 2016 08:29:54 +0000 (08:29 +0000)]
ar71xx: WNR2000v3: exclude USB modules from image

Netgear WNR2000v3 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
SVN-Revision: 48701

8 years agouse "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh
John Crispin [Fri, 12 Feb 2016 08:29:44 +0000 (08:29 +0000)]
use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh

Avoids inadvertent file creation when executing
`/etc/init.d/dsl_control status`.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
SVN-Revision: 48700

8 years agovideo: kmod-pwm does not exist anymore
John Crispin [Fri, 12 Feb 2016 08:29:38 +0000 (08:29 +0000)]
video: kmod-pwm does not exist anymore

it was removed in r43947

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48699

8 years agoramips: Add support for Netgear EX2700
John Crispin [Fri, 12 Feb 2016 08:29:33 +0000 (08:29 +0000)]
ramips: Add support for Netgear EX2700

This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.

What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which expects a
uImage header in the last 64 bytes of the "kernel" partition, which
the bootloader expects to be 960k, a size exceeded by the standard
OpenWrt kernel.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
SVN-Revision: 48698

8 years agozynq: add new target
John Crispin [Fri, 12 Feb 2016 08:29:24 +0000 (08:29 +0000)]
zynq: add new target

Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697

8 years agokernel: gpio-button-hotplug: update to use threaded irq's
John Crispin [Fri, 12 Feb 2016 08:29:11 +0000 (08:29 +0000)]
kernel: gpio-button-hotplug: update to use threaded irq's

Many gpio controllers 'cansleep' due to the fact that they are behind busses
e.g. i2c etc.

Using threaded irq's allows for 'sleep-able' gpio's to be used.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 48696

8 years agoag71xx: fix build error with debugfs code
Felix Fietkau [Thu, 11 Feb 2016 22:48:36 +0000 (22:48 +0000)]
ag71xx: fix build error with debugfs code

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48695

8 years agoag71xx: increase rx ring size to improve performance
Felix Fietkau [Thu, 11 Feb 2016 15:02:07 +0000 (15:02 +0000)]
ag71xx: increase rx ring size to improve performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48694

8 years agoag71xx: store ring size order instead of ring size to avoid div/mod
Felix Fietkau [Thu, 11 Feb 2016 15:02:00 +0000 (15:02 +0000)]
ag71xx: store ring size order instead of ring size to avoid div/mod

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48693

8 years agoag71xx: increase tx ring size to improve performance
Felix Fietkau [Thu, 11 Feb 2016 15:01:54 +0000 (15:01 +0000)]
ag71xx: increase tx ring size to improve performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48692

8 years agoag71xx: optimize icache footprint of the receive poll function
Felix Fietkau [Thu, 11 Feb 2016 15:01:48 +0000 (15:01 +0000)]
ag71xx: optimize icache footprint of the receive poll function

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48691

8 years agokernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3
Felix Fietkau [Thu, 11 Feb 2016 15:00:19 +0000 (15:00 +0000)]
kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48690

8 years agokernel: Revert "kernel: set root on NFS when enabled"
Florian Fainelli [Thu, 11 Feb 2016 03:05:29 +0000 (03:05 +0000)]
kernel: Revert "kernel: set root on NFS when enabled"

This reverts r48591, users needing NFS root will know how to configure
their platform and kernel command-line appropriately.

Reported-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 48689

8 years agomtd: fix Seama format after replacing EOF with sysupgrade data
Rafał Miłecki [Wed, 10 Feb 2016 11:35:50 +0000 (11:35 +0000)]
mtd: fix Seama format after replacing EOF with sysupgrade data

Seama header has MD5 similarly to TRX and its CRC32. We need to update
it after replacing anything in Seama entity content to make bootloader
accept it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48688

8 years agolibubox: properly handle "null" values in blobmsg_add_json_element()
Jo-Philipp Wich [Tue, 9 Feb 2016 22:42:48 +0000 (22:42 +0000)]
libubox: properly handle "null" values in blobmsg_add_json_element()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48687

8 years agoubox: fix kmodloader resource leaks (#21826)
Jo-Philipp Wich [Tue, 9 Feb 2016 13:03:24 +0000 (13:03 +0000)]
ubox: fix kmodloader resource leaks (#21826)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48686

8 years agobase-files: add netifd's default prelocal table to /etc/iproute2/rt_tables
Jo-Philipp Wich [Tue, 9 Feb 2016 12:34:05 +0000 (12:34 +0000)]
base-files: add netifd's default prelocal table to /etc/iproute2/rt_tables

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48685

8 years agomvebu: fix WRT1900AC v1 LED driver module
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:53 +0000 (12:33 +0000)]
mvebu: fix WRT1900AC v1 LED driver module

Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver.

In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip,
and was upstreamed later in kernels > 4.0 to support the entire chip family.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>
[jow: fix Kconfig symbol name]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48684

8 years agoubox: fix open() error handling (#21826)
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:25 +0000 (12:33 +0000)]
ubox: fix open() error handling (#21826)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48683

8 years agox86: preserve partition table on sysupgrade
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:17 +0000 (12:33 +0000)]
x86: preserve partition table on sysupgrade

With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 48682

8 years agoramips: fix build error on oversized images by putting the dir-860l-b1 size check...
Felix Fietkau [Mon, 8 Feb 2016 19:18:21 +0000 (19:18 +0000)]
ramips: fix build error on oversized images by putting the dir-860l-b1 size check at the end of the chain

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48681

8 years agokernel: enable CONFIG_KALLSYMS_UNCOMPRESSED=y
Felix Fietkau [Mon, 8 Feb 2016 18:44:21 +0000 (18:44 +0000)]
kernel: enable CONFIG_KALLSYMS_UNCOMPRESSED=y

It was enabled ages ago when it was added.
It still saves about 10k after LZMA, so let's enable it again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48680

8 years agodropbear: honor CONFIG_TARGET_INIT_PATH
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:57 +0000 (14:28 +0000)]
dropbear: honor CONFIG_TARGET_INIT_PATH

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48679

8 years agobase-files: honor CONFIG_TARGET_INIT_PATH
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:50 +0000 (14:28 +0000)]
base-files: honor CONFIG_TARGET_INIT_PATH

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48678

8 years agoprocd: honor CONFIG_TARGET_INIT_PATH
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:42 +0000 (14:28 +0000)]
procd: honor CONFIG_TARGET_INIT_PATH

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48677

8 years agorules.mk: add TARGET_INIT_PATH toplevel variables
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:35 +0000 (14:28 +0000)]
rules.mk: add TARGET_INIT_PATH toplevel variables

Add a new variable TARGET_INIT_PATH which holds the default $PATH variable
value configured in menuconfig.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48676

8 years agogeneric: add missing kconfig symbol
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:29 +0000 (14:28 +0000)]
generic: add missing kconfig symbol

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48675

8 years agomt76: update to the latest version, fixes fragmented rx issues
Felix Fietkau [Mon, 8 Feb 2016 13:38:22 +0000 (13:38 +0000)]
mt76: update to the latest version, fixes fragmented rx issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48674

8 years agomac80211: improve a-msdu rx performance by avoiding unnecessary data copying
Felix Fietkau [Mon, 8 Feb 2016 13:38:11 +0000 (13:38 +0000)]
mac80211: improve a-msdu rx performance by avoiding unnecessary data copying

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48673

8 years agomac80211: fix a memory leak in a-msdu rx
Felix Fietkau [Mon, 8 Feb 2016 13:38:03 +0000 (13:38 +0000)]
mac80211: fix a memory leak in a-msdu rx

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48672

8 years agomac80211: update A-MSDU tx patch to the latest version
Felix Fietkau [Mon, 8 Feb 2016 13:37:55 +0000 (13:37 +0000)]
mac80211: update A-MSDU tx patch to the latest version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48671