openwrt/staging/hauke.git
7 years agoRevert "xtables-addons: fix nathelper-rtsp dependencies"
John Crispin [Wed, 23 Aug 2017 07:54:47 +0000 (09:54 +0200)]
Revert "xtables-addons: fix nathelper-rtsp dependencies"

This reverts commit e2ef80130e0c855df47b2e046aed2b3467845184.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agomediatek: drop kernel dep on userland module
John Crispin [Wed, 23 Aug 2017 07:54:26 +0000 (09:54 +0200)]
mediatek: drop kernel dep on userland module

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoxtables-addons: fix nathelper-rtsp dependencies
Philip Prindeville [Tue, 22 Aug 2017 16:13:00 +0000 (10:13 -0600)]
xtables-addons: fix nathelper-rtsp dependencies

Both nf_conntrack and nf_nat need to be called out.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoprocd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 14:47:18 +0000 (16:47 +0200)]
procd: update to latest git HEAD

54b46a3 procd: send ubus notify when a config file has changed

Signed-off-by: John Crispin <john@phrozen.org>
7 years agodnsmasq: add ubus notifications for new leases
John Crispin [Tue, 22 Aug 2017 14:43:02 +0000 (16:43 +0200)]
dnsmasq: add ubus notifications for new leases

Signed-off-by: John Crispin <john@phrozen.org>
7 years agohostapd: add additional ubus notifications
John Crispin [Tue, 22 Aug 2017 14:33:40 +0000 (16:33 +0200)]
hostapd: add additional ubus notifications

Signed-off-by: John Crispin <john@phrozen.org>
7 years agonvram: add help message for nvram magic not found
BangLang Huang [Fri, 24 Feb 2017 02:58:09 +0000 (10:58 +0800)]
nvram: add help message for nvram magic not found

The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: improve argument check when program start
BangLang Huang [Fri, 24 Feb 2017 02:52:52 +0000 (10:52 +0800)]
nvram: improve argument check when program start

print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: add usage() function
BangLang Huang [Fri, 24 Feb 2017 02:45:16 +0000 (10:45 +0800)]
nvram: add usage() function

Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: fix memory leak
BangLang Huang [Fri, 24 Feb 2017 02:16:17 +0000 (10:16 +0800)]
nvram: fix memory leak

Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonetifd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 07:12:56 +0000 (09:12 +0200)]
netifd: update to latest git HEAD

b5731bf allow setting rps/xps defualt values via uci
2a29d1a system: remove unused 6rd tunnel attributes
e627542 netifd: allow negative neighlocktime values
e41382c system-linux: parse ipv6 specific tunnel settings as nested data json object

Signed-off-by: John Crispin <john@phrozen.org>
7 years agogpio-button-hotplug: leave platform_device.dev.platform_data untouched
Furong Xu [Thu, 2 Mar 2017 09:00:32 +0000 (17:00 +0800)]
gpio-button-hotplug: leave platform_device.dev.platform_data untouched

get platform_data from gpio_keys_button_dev.pdata, and fix a illegal pointer
dereference like this:

[   51.143776] gpio-keys-polled gpio-keys-polled: missing poll_interval value
[   51.150852] gpio-keys-polled: probe of gpio-keys-polled failed with error -22
[  828.159993] gpio-keys-polled gpio-keys-polled: no memory for button data
[  828.166821] gpio-keys-polled: probe of gpio-keys-polled failed with error -12

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoutils/util-linux: Update to 2.30.1
Daniel Engberg [Tue, 11 Jul 2017 09:07:51 +0000 (11:07 +0200)]
utils/util-linux: Update to 2.30.1

Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agouboot-lantiq: Enable TFTP PUT support for backups
Carl-Daniel Hailfinger [Sat, 12 Aug 2017 17:04:52 +0000 (19:04 +0200)]
uboot-lantiq: Enable TFTP PUT support for backups

Backing up the current firmware from U-Boot over serial can take hours.
Booting a working Linux image for backup purposes is not always an option.
Using the tftpput command in U-Boot is the fastest and easiest way.

tftpput will upload the contents of a memory region to the TFTP server.
The IP address of the server is stored in the serverip variable.

Usage:
tftpput <memaddr> <length> <filename>

Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22):
VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
7 years agoimx6: add driver for temp/voltage monitoring
Koen Vandeputte [Thu, 17 Aug 2017 12:22:06 +0000 (14:22 +0200)]
imx6: add driver for temp/voltage monitoring

The Gateworks System Controller (GSC) mimics a standard AD7418 device on
I2C bus 0 at slave 0x29.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoimx6: refresh kernel config
Koen Vandeputte [Thu, 17 Aug 2017 12:22:05 +0000 (14:22 +0200)]
imx6: refresh kernel config

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoca-certificates: Update to 20170717
Christian Schoenebeck [Tue, 15 Aug 2017 18:44:17 +0000 (20:44 +0200)]
ca-certificates: Update to 20170717

Update to 20170717

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
7 years agoprocd: fix hotplug.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:25 +0000 (15:06 +0200)]
procd: fix hotplug.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agoprocd: fix hotplug-preinit.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:04 +0000 (15:06 +0200)]
procd: fix hotplug-preinit.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agomediatek: update to latest kernel patchset from v4.13-rc
John Crispin [Fri, 18 Aug 2017 16:11:52 +0000 (18:11 +0200)]
mediatek: update to latest kernel patchset from v4.13-rc

Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: update 4.4 to 4.4.83
Kevin Darbyshire-Bryant [Thu, 17 Aug 2017 12:21:21 +0000 (13:21 +0100)]
kernel: update 4.4 to 4.4.83

Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[cleanup commit message, add compile/runtime tested]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agokernel: update 4.9 to 4.9.44
Stijn Tintel [Thu, 17 Aug 2017 08:51:05 +0000 (10:51 +0200)]
kernel: update 4.9 to 4.9.44

Refresh patches.
Adapt 704-phy-no-genphy-soft-reset.patch.
Remove brcm2708/950-0005-mm-Remove-the-PFN-busy-warning.patch.
Compile-tested on brcm2708/bcm2708 and x86/64.
Runtime-tested on brcm2708/bcm2708 and x86/64.

Fixes the following vulnerabilities:
- CVE-2017-7533
- CVE-2017-1000111
- CVE-2017-1000112

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobcm53xx: backport DTS commits that setup USB LEDs
Rafał Miłecki [Thu, 17 Aug 2017 07:43:37 +0000 (09:43 +0200)]
bcm53xx: backport DTS commits that setup USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoodhcpd: update to latest git HEAD
Hans Dedecker [Wed, 16 Aug 2017 19:19:47 +0000 (21:19 +0200)]
odhcpd: update to latest git HEAD

94e65ee ndp: use IPv4 address list when comparing IPv4 addresses
ff5020d dhcpv6-ia: rework reconfigure accept logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: add support for the VoCore2 Lite
L. D. Pinney [Thu, 3 Aug 2017 20:09:06 +0000 (04:09 +0800)]
ramips: add support for the VoCore2 Lite

The VoCore2 Lite uses the same PCB as the Vocore2.
This patch moves the common VoCore2 parts into dtsi.

Removed memory node in the device tree source file.
Memory is detected automatically.

http://vocore.io/
http://vonger.net/
http://vonger.cn/

Specifications:
- SoC: MediaTek MT7688AN
- RAM: 64MB DDR2 EtronTech EM68B16CWQH-25H
- Flash: 8MB NOR SPI Flash GigaDevice GD25Q64CWIG
- Wireless: Built into MT7688AN with onboard IPEX connector

Firmware installation:
- VoCore2-Lite ships with firmware forked from OpenWrt.
- Installation from the bootloader is recommended.
- If using luci/sysupgrade use the -n option (do not keep settings)
  original firmware uses a modified proprietary MediaTek wireless driver.
- The wireless is disabled by default in LEDE.
- If reverting to factory firmware using the bootloader is recommended.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Tested by: Noble Pepper <noblepepper@gmail.com>

7 years agoramips: fix WHR-1166D WAN port
Mathias Kresin [Wed, 9 Aug 2017 18:17:43 +0000 (20:17 +0200)]
ramips: fix WHR-1166D WAN port

By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agowpa_supplicant: log to syslog instead of stdout
Stijn Tintel [Tue, 8 Aug 2017 05:56:06 +0000 (07:56 +0200)]
wpa_supplicant: log to syslog instead of stdout

While debugging an issue with a client device, wpa_supplicant did not
seem to log anything at all. Make wpa_supplicant log to syslog instead
of stdout, to make debugging easier and to be consistent with hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobrcm2708-gpu-fw: update to latest version
Stijn Tintel [Tue, 8 Aug 2017 05:07:12 +0000 (07:07 +0200)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobase-files: drop unused preinit_echo function
Rafał Miłecki [Mon, 7 Aug 2017 06:41:26 +0000 (08:41 +0200)]
base-files: drop unused preinit_echo function

It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agonftables: remove date from version
Hauke Mehrtens [Wed, 9 Aug 2017 21:08:48 +0000 (23:08 +0200)]
nftables: remove date from version

We are using the normal 0.7 version of nftables, do not add an
additional date to the version number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agotools/pkg-config: Update to 0.29.2
Daniel Engberg [Tue, 8 Aug 2017 06:14:28 +0000 (08:14 +0200)]
tools/pkg-config: Update to 0.29.2

* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/expat: Update to 2.2.3
Daniel Engberg [Mon, 7 Aug 2017 03:00:46 +0000 (05:00 +0200)]
tools/expat: Update to 2.2.3

Update (lib)expat to 2.2.3
Remove poor entropy hack, 2.2.3 uses /dev/urandom in worst case

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agoutils/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:44:27 +0000 (04:44 +0200)]
utils/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:42:21 +0000 (04:42 +0200)]
tools/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agolantiq: fix missing otg_cap on danube platform
Daniel Gonzalez Cabanelas [Sat, 29 Jul 2017 12:54:15 +0000 (14:54 +0200)]
lantiq: fix missing otg_cap on danube platform

USB doesn't work in some danube boards because otg_cap
is missing since previous changes made on the USB-dwc2
lantiq driver. Fix it.

Tested on the ARV7518PW router.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
7 years agobase-files: don't setup network in preinit if failsafe is disabled
Rafał Miłecki [Mon, 7 Aug 2017 09:09:33 +0000 (11:09 +0200)]
base-files: don't setup network in preinit if failsafe is disabled

With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoprocd: update to the latest git HEAD
Hans Dedecker [Tue, 8 Aug 2017 12:50:36 +0000 (14:50 +0200)]
procd: update to the latest git HEAD

a17e1e8 watchdog: fix inline watchdog_get_magicclose function prototype

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: ArcherC50v1: fix wlan2g MAC address
Thibaut VARENE [Fri, 4 Aug 2017 15:22:03 +0000 (17:22 +0200)]
ramips: ArcherC50v1: fix wlan2g MAC address

By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agolantiq: board.d: use auto xfer_mode as default
Martin Schiller [Thu, 3 Aug 2017 06:37:53 +0000 (08:37 +0200)]
lantiq: board.d: use auto xfer_mode as default

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: add support for auto xfer_mode and auto line_mode
Martin Schiller [Thu, 3 Aug 2017 07:55:00 +0000 (09:55 +0200)]
ltq-vdsl-app: add support for auto xfer_mode and auto line_mode

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

xfer_mode and line_mode can be set to fixed value independantly from
each other.

The syntax for the tc_layer argument of vdsl_cpe_control is as follow:

-T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL>

where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer

and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be:
1=64/65-octet encapsulation supported
2=64/65-octet encapsulation with pre-emption
3=64/65-octet encapsulation with short packets

Default: In case of no '-T' option is given, ADSL will be configured
in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1

The '-M' argument of dsl_cpe_control defines the initial DSL mode
(NextMode) for ADSL/VDSL multimode handling.

Possible Values: 0=API-default, 1=ADSL, 2=VDSL

Default: In case of no '-M' option is given, '0' (API-default) will
be selected.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: mask out ADSL bits when VDSL is requested
Martin Schiller [Thu, 3 Aug 2017 07:50:03 +0000 (09:50 +0200)]
ltq-vdsl-app: mask out ADSL bits when VDSL is requested

If the line_mode is fixed configured to vdsl, than only G.993 VDSL
should be used.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: use notification based ATM/PTM driver load
Martin Schiller [Thu, 3 Aug 2017 07:44:21 +0000 (09:44 +0200)]
ltq-vdsl-app: use notification based ATM/PTM driver load

This patch removes the fixed atm/ptm driver loading and
switches to notification based driver loading.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agolantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load
Martin Schiller [Thu, 29 Jun 2017 04:54:00 +0000 (06:54 +0200)]
lantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load

This is needed to be able to load the ltq-atm/ltq-ptm driver
from a notify script during synchronization, because the line can
reach showtime state before the driver is fully loaded.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agolantiq: split up dsl_notify.sh into separate notification handlers
Martin Schiller [Thu, 29 Jun 2017 04:49:49 +0000 (06:49 +0200)]
lantiq: split up dsl_notify.sh into separate notification handlers

This makes it possible to simply add additional notification handlers
by putting new scripts in the /etc/hotplug.d/dsl directory.

the following Environment Variables are used:

(values marked with an * are only available when bonding support is
compiled in)

DSL_NOTIFICATION_TYPE with one of these values:
- DSL_STATUS
- DSL_INTERFACE_STATUS
- DSL_DATARATE_STATUS_US
- DSL_DATARATE_STATUS_DS

DSL_LINE_NUMBER=<0|1> *

If DSL_NOTIFICATION_TYPE == DSL_STATUS, these variables are set:

- DSL_XTU_STATUS=<ADSL|VDSL>
- DSL_TC_LAYER_STATUS=<ATM|EFM>
- DSL_EFM_TC_CONFIG_US=<NORMAL|PRE_EMPTION>
- DSL_EFM_TC_CONFIG_DS=<NORMAL>

If DSL_NOTIFICATION_TYPE == DSL_INTERFACE_STATUS, these variables are
set:

- DSL_INTERFACE_STATUS=<DOWN|READY|HANDSHAKE|TRAINING|UP>
- DSL_BONDING_STATUS=<INACTIVE|ACTIVE> *

If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_US, these variables are
set:

- DSL_DATARATE_US_BC0=<Upstream data rate in bit/s for Channel 0>
- DSL_DATARATE_US_BC1=<Upstream data rate in bit/s for Channel 1> *

If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_DS, these variables are
set:

- DSL_DATARATE_DS_BC0=<Downstream data rate in bit/s for Channel 0>
- DSL_DATARATE_DS_BC1=<Downstream data rate in bit/s for Channel 1> *

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-xdsl-app: drop esi call
Mathias Kresin [Thu, 3 Aug 2017 19:11:57 +0000 (21:11 +0200)]
ltq-xdsl-app: drop esi call

The esi call was added to workaround a race condition between applying
a configured mac address to the wan interface and starting the protocol
(handler) as it was observed in a DHCP over ATM bridge configuration.

Martin Schiller, TDT GmbH was so kind to test with their local
infrastructure if the race condition still exists. The provided package
dumps captured behind the DSLAM shows that it doesn't. It was most
likely fixed with adding carrier support to the lantiq ptm/atm driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agokernel: add missing patch
John Crispin [Sat, 5 Aug 2017 07:47:41 +0000 (09:47 +0200)]
kernel: add missing patch

This patch was accidentally dropped.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: split patches folder up into backport, pending and hack folders
John Crispin [Sun, 25 Dec 2016 19:11:34 +0000 (20:11 +0100)]
kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoramips: fix cd-poll sd card remove randomly
Qin Wie [Tue, 1 Aug 2017 06:26:49 +0000 (14:26 +0800)]
ramips: fix cd-poll sd card remove randomly

Fix when add 'mediatek,cd-poll' to dts cause the sd card be removed randomly.
Special for the device without card-detect pin.

Signed-off-by: Qin Wie <me@vonger.cn>
7 years agobase-files: suppress uci not found output in login.sh
Florian Eckert [Tue, 1 Aug 2017 12:35:18 +0000 (14:35 +0200)]
base-files: suppress uci not found output in login.sh

Fix "uci: Entry not found" output if "ttylogin" is not set in
"etc/config/system"

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agoodhcpd: update to latest git HEAD (FS#402, FS#524)
Hans Dedecker [Thu, 3 Aug 2017 19:20:47 +0000 (21:20 +0200)]
odhcpd: update to latest git HEAD (FS#402, FS#524)

296b4a0 dhcpv6: assign all viable DHCPv6 addresses by default (FS#402, FS#524)
f4d38e0 treewide: reflect managed mode is related to RA

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: move common parts into dtsi
Mathias Kresin [Sun, 30 Jul 2017 11:50:36 +0000 (13:50 +0200)]
ramips: move common parts into dtsi

Move the common parts of boards with multiple flash size variants into
dtsi files.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: update device tree source files
L. D. Pinney [Sat, 29 Jul 2017 02:14:07 +0000 (10:14 +0800)]
ramips: update device tree source files

Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agotools/firmware-utils: document reserved fields in mkchkimg
Thibaut VARENE [Sun, 30 Jul 2017 10:40:25 +0000 (12:40 +0200)]
tools/firmware-utils: document reserved fields in mkchkimg

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: Add support for Netgear EX3800
Thibaut VARENE [Sun, 30 Jul 2017 10:17:44 +0000 (12:17 +0200)]
ramips: Add support for Netgear EX3800

The Netgear EX3800 is essentially an EX3700 with a mains output socket.

Both devices use the exact same firmware image (original firmware is named
EX3700-EX3800-version.chk).

This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and
updating the necessary glue.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: EX3700: rename factory.bin to factory.chk
Thibaut VARENE [Sun, 30 Jul 2017 10:02:55 +0000 (12:02 +0200)]
ramips: EX3700: rename factory.bin to factory.chk

The stock firmware upgrade interface requires the file to end with a .chk
extension.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: cleanup EX2700 and WN3000RPv3 LEDs
Thibaut VARENE [Sun, 30 Jul 2017 13:42:38 +0000 (15:42 +0200)]
ramips: cleanup EX2700 and WN3000RPv3 LEDs

This patch cleans up the WN3000RPv3 and EX2700 setup, bringing it in line
with other similar devices:

The power led is a bicolor one. The bootloader brings the red side on at
powerup.

Instead of blinking the red side in diag.sh and need to forcefully turn it off
in 01_leds, this patch simplifies the setup by relying on the default off state
of the gpio-led driver for the red side and blinking the green side as with
other devices.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: cleanup AsiaRF AWM002 eval board support
Mathias Kresin [Sun, 30 Jul 2017 09:08:03 +0000 (11:08 +0200)]
ramips: cleanup AsiaRF AWM002 eval board support

Cleanup the dtsi files and remove one layer of dtsi. Set the size of
the firmware partition to a value matching the flash size from the
board (variant) name.

Remove the usb led trigger. There is neither a default config for the
usb led trigger nor a LED for usb activity indication.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: drop AsiaRF AWM003 eval board
Mathias Kresin [Sun, 30 Jul 2017 09:16:09 +0000 (11:16 +0200)]
ramips: drop AsiaRF AWM003 eval board

Everything is identical to the AWM002 8m eval board. No need to
duplicate it once more.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix Omnima MiniEMBWiFi image
Mathias Kresin [Mon, 31 Jul 2017 18:21:12 +0000 (20:21 +0200)]
ramips: fix Omnima MiniEMBWiFi image

Reference the Omnima MiniEMBWiFi device tree source file in the image
build code. Otherwise the dts of the image processed before is used.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: build HuaWei HG255D image
Mathias Kresin [Mon, 31 Jul 2017 18:19:14 +0000 (20:19 +0200)]
ramips: build HuaWei HG255D image

The code to build an image was disabled some time ago for unknown
reasons albeit the image looks fine.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: drop Edimax BR-6425 support
Mathias Kresin [Mon, 31 Jul 2017 16:02:40 +0000 (18:02 +0200)]
ramips: drop Edimax BR-6425 support

Code to build an image for the Edimax BR-6425 never existed.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: add missing partitions
Mathias Kresin [Mon, 31 Jul 2017 16:00:35 +0000 (18:00 +0200)]
ramips: add missing partitions

The partitions were lost during migration to device tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agomediatek: move mt7623 support into a 32bit subtarget
John Crispin [Tue, 1 Aug 2017 06:36:49 +0000 (08:36 +0200)]
mediatek: move mt7623 support into a 32bit subtarget

this is in preparation for adding the new 64bit mt7622 support.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoramips: fix PCI init on MT7620 with Linux 4.9+
Ilya Katsnelson [Sun, 9 Jul 2017 08:24:58 +0000 (11:24 +0300)]
ramips: fix PCI init on MT7620 with Linux 4.9+

So, this is kind of complicated. This has been upstream for a while,
imported from OpenWRT/LEDE with some cleanups. LEDE ramips has stayed
on linux-4.4 this whole time, with the old(er) version of the patch
that had correct behavior[0], while upstream got changed[1].

When LEDE updated to kernel 4.9, the older version of the code from
the patch got replaced with the upstream version containing the bug.

The original behavior, however, seems to be correct here, as the
official programming guide[2] indicates that bit 31 (PDRV_SW_SET)
in register PPLL_CFG1 is reserved, but bit 23 (added as PPLL_LD)
is the PPLL lock state (which also happens to line up with the
error message).

The original confusion probably comes from the double definition
of PDRV_SW_SET[3, 4] in the upstream code, with one correct definition
(31) and one incorrect one (23).

I've also used the opportunity to clean up the error message a bit -
it's still not really helpful to anyone who doesn't already know what
the PPLL is, but at least it's slightly more readable now.

This will probably need to be upstreamed as well, since with the way
it's currently set up, it's unlikely PCI ever worked for anyone who's
running an upstream kernel on that SoC.

[0]: https://github.com/lede-project/source/blob/05d6e92594c507dcd1f4be6c1bcb2282fe1abe1f/target/linux/ramips/patches-4.4/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch#L259
[1]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L246
[2]: http://www.anz.ru/files/mediatek/MT7620_ProgrammingGuide.pdf
[3]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L36
[4]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L39

Signed-off-by: Ilya Katsnelson <me@0upti.me>
7 years agoprocd: update to latest git HEAD
John Crispin [Mon, 31 Jul 2017 17:20:16 +0000 (19:20 +0200)]
procd: update to latest git HEAD

f062b30 procd: Do not leak pipe file descriptors to children

Signed-off-by: John Crispin <john@phrozen.org>
7 years agofstools: update to latest git HEAD
John Crispin [Mon, 31 Jul 2017 17:15:36 +0000 (19:15 +0200)]
fstools: update to latest git HEAD

8ab4fda fstools: add btrfs support

Signed-off-by: John Crispin <john@phrozen.org>
7 years agofirmware-utils: mktplinkfw2: respect -e option when reading fw info
Rafał Miłecki [Sun, 23 Jul 2017 20:19:21 +0000 (22:19 +0200)]
firmware-utils: mktplinkfw2: respect -e option when reading fw info

When -e option it specified a corresponding flag is set in the
custom_board. By using custom_board as fallback -e option gets respected
for unknown boards.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agofirmware-utils: mktplinkfw2: fix info for images with LE kernel LA/EP
Rafał Miłecki [Sun, 23 Jul 2017 20:19:20 +0000 (22:19 +0200)]
firmware-utils: mktplinkfw2: fix info for images with LE kernel LA/EP

With this change endianness is also respected when reading firmware
info.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agofirmware-utils: mktplinkfw2: replace "endian_swap" field with "flags"
Rafał Miłecki [Sun, 23 Jul 2017 20:19:19 +0000 (22:19 +0200)]
firmware-utils: mktplinkfw2: replace "endian_swap" field with "flags"

This will allow adding more similar tricks needed by other hardware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoramips: Archer C50v1: fix power led
Thibaut VARENE [Sat, 29 Jul 2017 09:32:44 +0000 (11:32 +0200)]
ramips: Archer C50v1: fix power led

01_leds had a workaround for the power led to compensate for the
inverted GPIO state. This patch was missing from my previous commit.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[add the power led default-state which was omitted in the last commit
by me]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: Archer C50v1: fix switch port numbering
Thibaut VARENE [Fri, 28 Jul 2017 20:36:52 +0000 (22:36 +0200)]
ramips: Archer C50v1: fix switch port numbering

Luci shows switch ports in wrong order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: Archer C50v1: fix LEDs active levels
Thibaut VARENE [Fri, 28 Jul 2017 21:26:40 +0000 (23:26 +0200)]
ramips: Archer C50v1: fix LEDs active levels

All LEDs GPIOs are active low on this device.

WAN and POWER states were inverted. Add default state for power.

Tested on Archer C50v1.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: fix Mercury MAC1200R v2.0 board name
Mathias Kresin [Fri, 28 Jul 2017 17:22:55 +0000 (19:22 +0200)]
ramips: fix Mercury MAC1200R v2.0 board name

With d2b6bf141662 ("ramips: fix image validation errors") the board
name was changed to fix an image validation error. But this change
wasn't applied to all other files using the board name, which broke
sysupgrade.

Revert this change and use the former board name in the metadata
instead.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: mt7621: add compatible strings
L. D. Pinney [Thu, 27 Jul 2017 16:49:06 +0000 (00:49 +0800)]
ramips: mt7621: add compatible strings

Add compatible strings to all mt7621 based device tree source files to
fix formal issues.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
7 years agobrcm63xx: add NULL clock fix send upstream
Mathias Kresin [Fri, 28 Jul 2017 18:09:53 +0000 (20:09 +0200)]
brcm63xx: add NULL clock fix send upstream

Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.

Fixes: FS#735
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: add NULL clock fix send upstream
Mathias Kresin [Fri, 28 Jul 2017 17:38:04 +0000 (19:38 +0200)]
ramips: add NULL clock fix send upstream

Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.

Fixes: FS#735
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoar7: add NULL clock fix send upstream
Mathias Kresin [Fri, 28 Jul 2017 17:05:33 +0000 (19:05 +0200)]
ar7: add NULL clock fix send upstream

Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoopenssl: update to version 1.0.2l
Lucian Cristian [Mon, 24 Jul 2017 23:17:56 +0000 (02:17 +0300)]
openssl: update to version 1.0.2l

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
7 years agotcpdump: Update to 4.9.1
Daniel Engberg [Mon, 24 Jul 2017 22:10:58 +0000 (00:10 +0200)]
tcpdump: Update to 4.9.1

Update tcpdump to 4.9.1

Fixes:
 * CVE-2017-11108: Fix bounds checking for STP.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agokernel: update kernel 4.4 to version 4.4.79
Hauke Mehrtens [Sun, 23 Jul 2017 12:25:40 +0000 (14:25 +0200)]
kernel: update kernel 4.4 to version 4.4.79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agokernel: update kernel 4.9 to version 4.9.40
Hauke Mehrtens [Sun, 23 Jul 2017 11:40:40 +0000 (13:40 +0200)]
kernel: update kernel 4.9 to version 4.9.40

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agoopkg: bump to version 2017-07-28
Jo-Philipp Wich [Fri, 28 Jul 2017 11:18:32 +0000 (13:18 +0200)]
opkg: bump to version 2017-07-28

Commits since last 2017-07-11:

4bd8601 pkg_parse: fix segfault when parsing descriptions with leading newlines

Fixes FS#933.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agobrcm63xx: DTS: fix AV4202N flash layout
Paul Wassi [Sun, 23 Jul 2017 10:07:58 +0000 (12:07 +0200)]
brcm63xx: DTS: fix AV4202N flash layout

Fix incorrect offset and size of linux partition.

Fixes: 97b36aca09da ("brcm63xx: add pflash for remaining pflash equipped boards")
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years agoramips: drop stray kernel 4.4 configs
Mathias Kresin [Tue, 25 Jul 2017 17:37:08 +0000 (19:37 +0200)]
ramips: drop stray kernel 4.4 configs

The kernel 4.4 patches where already removed with the bump to 4.9. Drop
the the subtarget configs as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: add support for Loewe WMDR-143N
Oliver Fleischmann [Thu, 20 Jul 2017 19:02:33 +0000 (21:02 +0200)]
ramips: add support for Loewe WMDR-143N

The WMDR-143N is a small module originally used as a Wifi client
in some Loewe smart TV sets. It is sold cheaply at german surplus
shops. The module contains a RT3662 SOC.

Specifications:

- 500 MHz CPU Clock
- 1x 10/100Mbps Ethernet (pin header)
- 32 MB of RAM
- 8 MB of FLASH
- 2T3R 2.4/5 GHz (SOC internal)
- 3 Antennas on PCB
- UART pads on PCB (J3: 1 = +3.3V, 2 = RX, 3 = TX, 4 = GND), TX
  and RX are 3,3V only! The square hole is pin 1
- Power supply pads on PCB (J6: 1 and 2 = +5V, 3 and 4 = GND)
  The square hole is pin 1

The original firmware has two identical kernel/rootfs images and
two "Factory" calibration data blocks in flash. The LEDE image
leaves only the first "Factory" block in place and uses both
"Kernel" blocks and the redundant "Factory" block together to gain
enough space for the jffs2 partition.

Flash instructions:

You need UART and Ethernet connections to flash the board. Use
the LEDE "sysupgrade.bin" image with tftp.

Apply power to the board and in the first 5 seconds, hit 2 to
select TFTP upload. The bootloader asks for board- and server IP
addresses and filename.

Alternate method: With the vendor firmware running, assign an IP
address to the ethernet port, tftp the firmware image to
/tmp and write to mtd4 ("KernelA").

Signed-off-by: Oliver Fleischmann <ogf@bnv-bamberg.de>
[remove pinctrl node from dts, no pin is used as GPIO]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: pinctrl: return proper error if pinctrl0 is empty
Mathias Kresin [Tue, 25 Jul 2017 18:23:28 +0000 (20:23 +0200)]
ramips: pinctrl: return proper error if pinctrl0 is empty

Children of the pinctrl0 node are optional. Return EINVAL (=missing)
instead of 0. Fixes a hang if the pinctrl0 has no children.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: John Crispin <john@phrozen.org>
7 years agoscripts/package-metadata.pl: inhibit compile deps on missing build types
Jo-Philipp Wich [Wed, 26 Jul 2017 22:18:12 +0000 (00:18 +0200)]
scripts/package-metadata.pl: inhibit compile deps on missing build types

When a package declares a PKG_BUILD_DEPENDENCY or HOST_BUILD_DEPENDENCY on
a not existing build type, the metadata script will emit a reference to an
unresolvable build target in tmp/.packagedeps, causing the make process to
fail hard in a way not catchable by the IGNORE_ERRORS mechanism.

In a situation where a package "test-a" declares a build dependency
"PKG_BUILD_DEPENDS:=test-b/host" while the Makefile of "test-b" does not
implement a HostBuild, make fails with an unrecoverable error in the form:

    make[1]: Entering directory '...'
    make[1]: *** No rule to make target 'package/test-b/host/compile',
                 needed by 'package/test-a/compile'.  Stop.
    make[1]: Leaving directory '...'
    .../toplevel.mk:200: recipe for target 'package/test-a/compile' failed
    make: *** [package/test-a/compile] Error 2

Extend the metadata generation script to catch such unresolved references
and emit a visable warning upon detection.

After this change, the script will emit a warning similar to:

    WARNING: Makefile "package/test-a/Makefile" has a build dependency on
    "test-b/host" but "package/test-b/Makefile" does not implement a
    "host" build type

Fixes a global build cluster outage which occured after the "python-cffi"
feed package removed its HostBuild which the "python-cryptography" package
build-depended on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoramips: refresh the rcu_sched patch and remove debug info
John Crispin [Wed, 26 Jul 2017 07:32:22 +0000 (09:32 +0200)]
ramips: refresh the rcu_sched patch and remove debug info

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoralink: fix rcu_sched stalls on mt7621
John Crispin [Tue, 25 Jul 2017 12:46:01 +0000 (14:46 +0200)]
ralink: fix rcu_sched stalls on mt7621

there were 2 bugs
*) core1 came up with a bad bogo mips, looks like the clock needed time to stabilize
*) HPT frequency was not set making r4k timers not come up properly

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoramips: add support for the GnuBee Personal Cloud One
L. D. Pinney [Sat, 22 Jul 2017 01:15:56 +0000 (09:15 +0800)]
ramips: add support for the GnuBee Personal Cloud One

    The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com
    It is a low-cost, low-power, network-attached storage device.

    Specifications:

    - SoC: MediaTek MT7621AT
    - RAM: DDR3 512 MB
    - Flash: 32 MB
    - Six SATA ports for 2.5" Drives
    - One micro SDcard
    - One USB 3.0
    - Two USB 2.0
    - Gigabit Ethernet: 1 x WAN and 1 x LAN
    - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
    - Four GPIOs available on a pin header

    Flash instructions:

    The GnuBee Personal Cloud One ships with libreCMC installed.
    libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
    As such one can upgrade using the webinterface or sysupgrade.

    Das U-Boot has multiple options for recovery or updates including :

    - USB
    - http
    - tftp

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use switchdev led trigger, all interfaces are in vlan1; rename leds
according to board.d setting; remove ge2 group from the pinmux, this
group doesn't exist in the driver]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: DIR-860L-B1 fix switch port numbering
Thibaut VARENE [Tue, 25 Jul 2017 10:29:14 +0000 (12:29 +0200)]
ramips: DIR-860L-B1 fix switch port numbering

Luci shows switch ports in inverted order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agokernel: netfilter: fix nf-nathelper(-extra) description
Uwe Arnold [Thu, 20 Jul 2017 18:04:26 +0000 (20:04 +0200)]
kernel: netfilter: fix nf-nathelper(-extra) description

The tftp and irc netfilter modules are provided by nf-nathelper-extra
and not by nf-nathelper.

Signed-off-by: Uwe Arnold <donvipre@gmail.com>
[move the irc module as well]
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix wps button gpio for DWR-512
Giuseppe Lippolis [Tue, 18 Jul 2017 20:55:53 +0000 (22:55 +0200)]
ramips: fix wps button gpio for DWR-512

The WPS button is at GPIO#7.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agoramips: DTS: VoCore2 improvements/fixes
Paul Wassi [Sat, 22 Jul 2017 09:15:55 +0000 (11:15 +0200)]
ramips: DTS: VoCore2 improvements/fixes

The VoCore2 features 128MB of RAM, therefore set
memory in DTS to 128*1024*1024 = 0x8000000
The board's LED is connected to GND, set it to
ACTIVE_HIGH here.
Make serial console working again on kernel 4.9 by
change of pinmux configuration.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years agoramips: add support for TP-Link RE350
Alex Maclean [Sun, 23 Jul 2017 19:06:44 +0000 (20:06 +0100)]
ramips: add support for TP-Link RE350

The TP-Link RE350 is a wall-wart AC1200 range extender/access point with
a single gigabit ethernet port and two non-detachable antennas, based on
the MT7621A SoC with MT7603E and MT7612E radios.

Firmware wise it is very similar to the QCA based RE450.

SoC: MediaTek MT7621A (880MHz)
Flash: 8MiB (Winbond W25Q64)
RAM:   64MiB (DDR2)
Ethernet: 1x 1Gbit
Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E)
LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act
(green)
Buttons: On/off, LED, reset, WPS

Serial header at J1, 57600 8n1:
Pin 1 TX
Pin 2 RX
Pin 3 GND
Pin 4 3.3V

Factory image can be uploaded directly through the stock UI.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
7 years agofirmware-utils: tplink-safeloader: add support for TP-Link RE350
Alex Maclean [Mon, 3 Jul 2017 20:05:44 +0000 (21:05 +0100)]
firmware-utils: tplink-safeloader: add support for TP-Link RE350

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
7 years agoath9k: fix regression in multicast buffering fix
Felix Fietkau [Tue, 25 Jul 2017 17:47:48 +0000 (19:47 +0200)]
ath9k: fix regression in multicast buffering fix

Update the more data flag on the last frame, but tx from the first frame
on.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoath9k: fix typo in US tx power reduction fix
Felix Fietkau [Tue, 25 Jul 2017 07:13:24 +0000 (09:13 +0200)]
ath9k: fix typo in US tx power reduction fix

Use max_t instead of min_t to prevent the value from going below zero

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobuild: bundle-libraries.sh: do not override argv[0] in inner exec calls
Jo-Philipp Wich [Mon, 24 Jul 2017 11:33:33 +0000 (13:33 +0200)]
build: bundle-libraries.sh: do not override argv[0] in inner exec calls

Only mangle argv[0] of the first executed process and leave the argument
vector of subsequent invocations as-is to allow child programs to properly
discover resources relative to their binary locations.

Fixes "cc1" discovery when executing the host gcc through the bundled
"ccache" executable.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoath9k: fix more-data flag for buffered multicast packets
Felix Fietkau [Mon, 24 Jul 2017 08:48:26 +0000 (10:48 +0200)]
ath9k: fix more-data flag for buffered multicast packets

The flag needs to be cleared for the last packet in the list, not the
first one. Fixes some issues with multicast packet loss for powersave
clients connected to an ath9k AP.

Signed-off-by: Felix Fietkau <nbd@nbd.name>