openwrt/staging/wigyori.git
5 years agouboot-tegra: bump to 2019.04
Tomasz Maciej Nowak [Thu, 25 Apr 2019 13:38:16 +0000 (15:38 +0200)]
uboot-tegra: bump to 2019.04

This version has important change for tegra boards which is reserving
32MB memory for Linux kernel instead of current 16MB.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
5 years agoath79: glinet_gl-ar750s: Use QCA9887 firmware
Jeff Kletsky [Fri, 3 May 2019 11:59:59 +0000 (04:59 -0700)]
ath79: glinet_gl-ar750s: Use QCA9887 firmware

The GL.iNet AR750S is based around the QCA9563
and requires the QCA9887 firmware for operation.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
5 years agoar71xx: fix failsafe interface for TL-WR940nv6
Joachim Fünfer [Mon, 29 Apr 2019 10:53:08 +0000 (12:53 +0200)]
ar71xx: fix failsafe interface for TL-WR940nv6

Switches failsafe mode interface from WAN to LAN ports.

Tested on TL-WR940Nv6.0 and TL-WR940Nv6.1

Signed-off-by: Joachim Fünfer <joachim.fuenfer@stusta.net>
5 years agoath79: fix OCEDO Raccoon 10Mbit PLL value
David Bauer [Mon, 22 Apr 2019 19:29:42 +0000 (21:29 +0200)]
ath79: fix OCEDO Raccoon 10Mbit PLL value

This corrects the PLL value for 10 Mbit/s links on the OCEDO Raccoon.
Prior to this patch, 10 Mbit/s links would not transmit data.

It is worth mentioning that the vendor firmware used the same PLL
settings and 10Mbit/s was also not working there.

All other link-modes are working correctly without any packet loss.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agobase-files: add service_stopped as a post stop hook
Arthur Skowronek [Wed, 30 Jan 2019 13:58:47 +0000 (14:58 +0100)]
base-files: add service_stopped as a post stop hook

Purpose of these changes is to introduce a hook for post service
shutdown in a similar fashion to the existing hook service_started. I
found it to be useful to specify a hook that is called once the service
has been stopped and not before the service is stopped like the
stop_service hook does.

The concrete use case I have for this is that I'm running a binary that
takes over the hardware watchdog timer. Said binary unfortunately can
not use ubus directly to tell procd to hand over the watchdog timer so
this has to be done in the service file for the binary in question. In
order to support a clean handover of the watchdog timer back to procd,
the service init script has to dispatch the ubus invocation once the
binary in question has been stopped.

Signed-off-by: Arthur Skowronek <ags@digineo.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[added commit message, use the same form as other hooks]

5 years agoar71xx: mute script error in ar922x-led-fix script
Rosy Song [Tue, 16 Apr 2019 01:05:14 +0000 (09:05 +0800)]
ar71xx: mute script error in ar922x-led-fix script

This commit fixes following script error in syslog:

 cat: can't open '/sys/devices/platform/ehci-platform/usb1/1-1/1-1.2/1-1.2:1.4/ieee80211/phy*/name': No such file or directory
 sh: add: unknown operand
 sh: add: unknown operand

Signed-off-by: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[commit subject and message tweaks]

5 years agokernel: Rename UPROBE_EVENT to UPROBE_EVENTS
Petr Štetiar [Wed, 10 Apr 2019 15:07:34 +0000 (17:07 +0200)]
kernel: Rename UPROBE_EVENT to UPROBE_EVENTS

Upstream has renamed UPROBE_EVENT to UPROBE_EVENTS in the following
commit:

 commit 6b0b7551428e4caae1e2c023a529465a9a9ae2d4
 Author: Anton Blanchard <anton@samba.org>
 Date:   Thu Feb 16 17:00:50 2017 +1100

     perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS

     We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as
     well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS.

     Consistently use the plurals.

So I'm changing it to this plural option in order to make kconfig happy
and stop asking about it if kernel is compiled with verbose logging:

 Enable uprobes-based dynamic events (UPROBE_EVENTS) [Y/n/?] (NEW)

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoconfig: kernel: Add KPROBE_EVENTS config option
Petr Štetiar [Wed, 10 Apr 2019 15:07:34 +0000 (17:07 +0200)]
config: kernel: Add KPROBE_EVENTS config option

Upstream has renamed KPROBE_EVENT to KPROBE_EVENTS in the following
commit:

 commit 6b0b7551428e4caae1e2c023a529465a9a9ae2d4
 Author: Anton Blanchard <anton@samba.org>
 Date:   Thu Feb 16 17:00:50 2017 +1100

     perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS

     We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as
     well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS.

     Consistently use the plurals.

So I'm adding this plural option in order to make kconfig happy and stop
asking about it if kernel is compiled with verbose logging:

  Enable kprobes-based dynamic events (KPROBE_EVENTS) [Y/n/?] (NEW)

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agokernel: Remove support for kernel 3.18
Hauke Mehrtens [Mon, 25 Mar 2019 14:29:06 +0000 (15:29 +0100)]
kernel: Remove support for kernel 3.18

No target is using kernel 3.18 anymore, remove all the generic
support for kernel 3.18.

The removed packages are depending on kernel 3.18 only and are not used on
any recent kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoxburst: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:15:57 +0000 (15:15 +0100)]
xburst: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoomap24xx: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:20:59 +0000 (15:20 +0100)]
omap24xx: Remove unmaintained target

This target only supports kernel 4.1, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoppc44x: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:19:15 +0000 (15:19 +0100)]
ppc44x: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoppc40x: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:16:59 +0000 (15:16 +0100)]
ppc40x: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomcs814x: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:18:26 +0000 (15:18 +0100)]
mcs814x: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoau1000: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:15:01 +0000 (15:15 +0100)]
au1000: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoadm8668: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:17:43 +0000 (15:17 +0100)]
adm8668: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoadm5120: Remove unmaintained target
Hauke Mehrtens [Mon, 25 Mar 2019 14:10:39 +0000 (15:10 +0100)]
adm5120: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agobrcm2708: fix renamed definition (FS#2265)
Koen Vandeputte [Fri, 3 May 2019 14:13:19 +0000 (16:13 +0200)]
brcm2708: fix renamed definition (FS#2265)

This target adds an alternative mmc driver using a patch.
Within this patch, a definition got renamed upstream.

Change it to fix following compile error:

  CC      drivers/mmc/host/bcm2835-mmc.o
In file included from ./include/linux/kernel.h:14:0,
                 from ./include/linux/delay.h:22,
                 from drivers/mmc/host/bcm2835-mmc.c:25:
drivers/mmc/host/bcm2835-mmc.c: In function 'bcm2835_mmc_dumpregs':
drivers/mmc/host/bcm2835-mmc.c:254:27: error: 'SDHCI_ACMD12_ERR' undeclared (first use in this function); did you mean 'SDHCI_CMD_CRC'?
   bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR),
                           ^
./include/linux/printk.h:137:18: note: in definition of macro 'no_printk'
    printk(fmt, ##__VA_ARGS__); \
                  ^~~~~~~~~~~
drivers/mmc/host/bcm2835-mmc.c:253:2: note: in expansion of macro 'pr_debug'
  pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
  ^~~~~~~~
drivers/mmc/host/bcm2835-mmc.c:254:27: note: each undeclared identifier is reported only once for each function it appears in
   bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR),
                           ^
./include/linux/printk.h:137:18: note: in definition of macro 'no_printk'
    printk(fmt, ##__VA_ARGS__); \
                  ^~~~~~~~~~~
drivers/mmc/host/bcm2835-mmc.c:253:2: note: in expansion of macro 'pr_debug'
  pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
  ^~~~~~~~
scripts/Makefile.build:326: recipe for target 'drivers/mmc/host/bcm2835-mmc.o' failed
make[8]: *** [drivers/mmc/host/bcm2835-mmc.o] Error 1

Upstream commit:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.114&id=45fd8679ea86bffb352132a1df4917c3d11375aa

Fixes: b765f4be407c ("kernel: bump 4.14 to 4.14.114")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoprocd: add procd_running() helper for checking running state
Rafał Miłecki [Wed, 1 May 2019 05:23:21 +0000 (07:23 +0200)]
procd: add procd_running() helper for checking running state

This should be helpful for implementing service_running() in procd init
scripts.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: John Crispin <john@phrozen.org>
5 years agoprocd: update to latest git HEAD
Hans Dedecker [Thu, 2 May 2019 15:28:42 +0000 (17:28 +0200)]
procd: update to latest git HEAD

01f3dc8 instance: dump user and group as well

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoprocd: allow passing optional group instance parameter
Michael Heimpold [Thu, 11 Apr 2019 19:01:09 +0000 (21:01 +0200)]
procd: allow passing optional group instance parameter

Sometimes is desirable to run a process with a specific group id
instead of the default one which is derived from passwd entry.
This can be achived now by using procd_set_param group $mygroup.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_SOURCE_VERSION update]
5 years agoprocd: allow passing optional syslog facility as instance parameter
Michael Heimpold [Thu, 11 Apr 2019 19:01:08 +0000 (21:01 +0200)]
procd: allow passing optional syslog facility as instance parameter

Optional syslog facility can be set by adding procd_set_param facility
$myfacility.
While at, also add stdout/stderr documentation.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_SOURCE_VERSION update]
5 years agokernel: bump 4.19 to 4.19.37
Koen Vandeputte [Mon, 29 Apr 2019 11:02:18 +0000 (13:02 +0200)]
kernel: bump 4.19 to 4.19.37

Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.114
Koen Vandeputte [Mon, 29 Apr 2019 11:01:53 +0000 (13:01 +0200)]
kernel: bump 4.14 to 4.14.114

Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Remove upstreamed:
- 022-0006-crypto-crypto4xx-properly-set-IV-after-de-and-encryp.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.171
Koen Vandeputte [Mon, 29 Apr 2019 10:05:49 +0000 (12:05 +0200)]
kernel: bump 4.9 to 4.9.171

Refreshed all patches.

Altered patches:
- 150-bridge_allow_receiption_on_disabled_port.patch
- 201-extra_optimization.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: iio: Fix BMP280 Auto probing
Robert Marko [Tue, 30 Apr 2019 15:58:42 +0000 (17:58 +0200)]
kernel: iio: Fix BMP280 Auto probing

Currently Auto probing for BMP/BME280 does not work because kernel
module name in the call is not correct.
Package name was used instead of kernel module name.

Signed-off-by: Robert Marko <robimarko@gmail.com>
5 years agolibroxml: bump to the 3.0.1 version
Rafał Miłecki [Tue, 23 Apr 2019 07:39:14 +0000 (09:39 +0200)]
libroxml: bump to the 3.0.1 version

Some of changes:
* Support for local-name()
* General refactoring
* Better parsing performance
* Fix possible buffer overflow & memleak
* Validation checks
* More commit functions (file, buffer, fd)

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agoprocd: update to latest git HEAD
Hans Dedecker [Mon, 29 Apr 2019 19:32:12 +0000 (21:32 +0200)]
procd: update to latest git HEAD

cfaed56 procd: add SIGPWR as signal
a30a8fd procd: copy the respawn property of new instance

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agomac80211: rt2x00: replace patches with upstream version
Daniel Golle [Mon, 29 Apr 2019 16:21:34 +0000 (18:21 +0200)]
mac80211: rt2x00: replace patches with upstream version

Support for RT3883/RT3663 was merged upstream [1]. Use that patch
instead of our original series. The resulting source tree is
exactly identical, this commit is merely reorganizing the patches.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id=d0e61a0f7cca51ce340a5a73595189972122ff25

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agoglibc: update to latest 2.27 commit (BZ #18035)
Hans Dedecker [Mon, 29 Apr 2019 12:56:04 +0000 (14:56 +0200)]
glibc: update to latest 2.27 commit (BZ #18035)

1961e5c7296 elf: Fix pldd (BZ#18035)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agokernel: add missing symbol in 4.19 config
Koen Vandeputte [Mon, 29 Apr 2019 13:28:03 +0000 (15:28 +0200)]
kernel: add missing symbol in 4.19 config

Intel AtomISP2 dummy / power-management driver (INTEL_ATOMISP2_PM) [N/m/y/?] (NEW)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agotools/ccache: update to 3.7
Deng Qingfang [Mon, 29 Apr 2019 05:26:36 +0000 (13:26 +0800)]
tools/ccache: update to 3.7

Update ccache to 3.7

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
5 years agokernel: fix regression on 4.19 with 613-netfilter_optional_tcp_window_check.patch...
Felix Fietkau [Sat, 27 Apr 2019 16:56:30 +0000 (18:56 +0200)]
kernel: fix regression on 4.19 with 613-netfilter_optional_tcp_window_check.patch (FS#2253)

Since ct->proto.tcp.last_win isn't updated when nf_ct_tcp_no_window_check is
enabled, the retransmission timeout check needs to be bypassed.

Based on patch by Rob Mosher

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoopenssl: build kmods only if engines are selected
Eneas U de Queiroz [Thu, 25 Apr 2019 19:23:40 +0000 (19:23 +0000)]
openssl: build kmods only if engines are selected

Add a conditional to the individual package's for the kmods in DEPENDS.
This avoids the need to compile the kernel modules when the crypto
engine packages are not selected.  The final binares are not affected by
this.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Tested-by: Rosen Penev <rosenp@gmail.com>
5 years agoscripts/qemustart: add notes on adding new options
Yousong Zhou [Fri, 26 Apr 2019 04:17:16 +0000 (04:17 +0000)]
scripts/qemustart: add notes on adding new options

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agoscripts/qemustart: fix network device emulation
Yousong Zhou [Thu, 25 Apr 2019 14:05:24 +0000 (14:05 +0000)]
scripts/qemustart: fix network device emulation

We only enabled pcnet driver for malta machine, and x86/legacy target
was supposed to only support e1000 model

Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agoscripts/qemustart: no network by default and enable with -n
Yousong Zhou [Thu, 25 Apr 2019 16:07:18 +0000 (16:07 +0000)]
scripts/qemustart: no network by default and enable with -n

This should make it easier to set up and possibly provide a "work out of
the box" experience for most test usage.  Typical wan&lan networking
setup is only two characters argument away.

Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agosdk: fix building external modules when CONFIG_STACK_VALIDATION=y
Yousong Zhou [Thu, 25 Apr 2019 05:26:23 +0000 (05:26 +0000)]
sdk: fix building external modules when CONFIG_STACK_VALIDATION=y

The option is at the moment enabled for x86/64.  The selection chain
should be

config RETPOLINE
  select STACK_VALIDATION if HAVE_STACK_VALIDATION
config x86
  select HAVE_STACK_VALIDATION            if X86_64

cryptdev-linux:

make[4]: Entering directory '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/cryptodev-linux-cryptodev-linux-1.10'
make -C /store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.113 M=/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/cryptodev-linux-cryptodev-linux-1.10 ARCH=x86 CROSS_COMPILE=x86_64-openwrt-linux-musl- modules
make[5]: Entering directory '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.113'
make[6]: *** No rule to make target '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/cryptodev-linux-cryptodev-linux-1.10/ioctl.o', needed by '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/cryptodev-linux-cryptodev-linux-1.10/cryptodev.o'.  Stop.
Makefile:1533: recipe for target '_module_/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/cryptodev-linux-cryptodev-linux-1.10' failed

Open vSwitch intree kmods

make[7]: Entering directory '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/openvswitch-2.11.0/datapath/linux'
make -C /store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.111 ARCH=x86 M=/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/openvswitch-2.11.0/datapath/linux modules
make[8]: Entering directory '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.111'
make[9]: *** No rule to make target 'tools/objtool/objtool', needed by '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/openvswitch-2.11.0/datapath/linux/actions.o'.  Stop.
Makefile:1533: recipe for target '_module_/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/openvswitch-2.11.0/datapath/linux' failed
make[8]: *** [_module_/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/openvswitch-2.11.0/datapath/linux] Error 2
make[8]: Leaving directory '/store/buildbot/slave/x86_64/build/sdk/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.111'

Reference: builddeb: include objtool binary in headers package, https://patchwork.kernel.org/patch/9014071/
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agoelfutils: bump to 0.176
Jose Olivera [Wed, 24 Apr 2019 04:17:29 +0000 (12:17 +0800)]
elfutils: bump to 0.176

*Fixes:
  -CVE-2019-7150
  -CVE-2019-7149
  -CVE-2019-7146
  -CVE-2019-7665
  -CVE-2019-7664
  -CVE-2019-7148

*Refresh 003-libintl-compatibility.patch

*Also reset PKG_RELEASE.

Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
5 years agoscripts/qemustart: fix usage with networking support
Hans Dedecker [Wed, 24 Apr 2019 17:54:44 +0000 (19:54 +0200)]
scripts/qemustart: fix usage with networking support

Commit 8bf500eb79 added support for qemu usage without networking
support but broke networking support as -n and -z do not work with
unquoted argument; fix this by quoting the arguments.

Fixes 8bf500eb79

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agomac80211: fix regression in skb resizing optimization in monitor mode (FS#2254)
Felix Fietkau [Wed, 24 Apr 2019 07:32:22 +0000 (09:32 +0200)]
mac80211: fix regression in skb resizing optimization in monitor mode (FS#2254)

struct ieee80211_local needs to be passed in separately instead of
dereferencing the (potentially NULL) sdata

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agotoolchain/musl: update to version 1.1.22
Koen Vandeputte [Fri, 12 Apr 2019 14:25:49 +0000 (16:25 +0200)]
toolchain/musl: update to version 1.1.22

new features:
- priority-inheritance mutexes
- membarrier syscall, pre-registration to use it, fallback emulation
- header-level support for new linux features in 4.19, 4.20, 5.0

major internal changes:
- complete, async-safe view of all existent threads as global list
- robust __synccall based on new thread list
- new dynamic TLS is installed synchronously at dlopen
- TLSDESC resolver functions no longer make bad ABI assumptions to call C
- resolved shared library dependencies are now recorded

compatibility & conformance:
- dependency-order shared library constructor execution
- sigaltstack no longer rejects SS_AUTODISARM, future flags
- FILE is now a complete (dummy) type in pre-C11 feature profiles
- setvbuf reports failure on invalid arguments
- TSVTX is exposed unconditionally in tar.h
- multithreaded set*id() no longer depends on /proc
- key slot reuse after pthread_key_delete no longer depends on /proc

bugs fixed:
- failures in multithreaded set*id() with concurrent thread creation/exit
- interposed free was called from invalid/inconsistent contexts
- freeaddrinfo performed invalid free of some partial results lists
- dlsym dependency order search had false negatives and false positives
- dn_skipname gave wrong results for labels with 8-bit content
- dcngettext clobbered errno, often breaking printing of error messages
- sscanf read past end of buffer under certain conditions (1.1.21 regression)
- pthread_key_create spuriously failed under race condition (1.1.21 regression)
- fdopendir wrongly succeeded with O_PATH file descriptors
- gets behaved incorrectly in presence of null bytes
- namespace violations in c11 tsd and mutex function dependencies
- incorrect prototype for makecontext (unimplemented)

arch-specfic bugs fixed:
- s390x had wrong values for POSIX_FADV_DONTNEED/_NOREUSE

Extensively tested on dozens of devices, covering most popular architectures.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Dainis Jonitis <dainis.jonitis@ubnt.com>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
5 years agoar71xx: add support for Mikrotik RouterBOARD 2011UiAS-2HnD r2
Koen Vandeputte [Fri, 12 Apr 2019 09:08:43 +0000 (11:08 +0200)]
ar71xx: add support for Mikrotik RouterBOARD 2011UiAS-2HnD r2

This board got a new hardware revision, without any change in functionality.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoath10k-ct: Update to 2019-04-08
Koen Vandeputte [Tue, 16 Apr 2019 08:54:52 +0000 (10:54 +0200)]
ath10k-ct: Update to 2019-04-08

9cd701a4f028 ath10k-ct:  Add PN get/set API for wave-2 firmware.
5c8a4668323b ath10k-ct:  Support over-riding the power ctl table in eeprom
75e2705f31bb ath10k-ct:  CCA, eeprom, other changes.
a696e602a0fc ath10k-ct:  Attempt to fix-out-of-tree compile for 4.16
a2aec62262df ath10k:  Improve beacon tx status for 4.20 kernel.
be5c21a82b15 ath10k-ct:  Fix out-of-tree compile for 4.20, pull in stable changes for 4.19

Fixes compile errors when using the 4.20 flavour.
Also the amount of beacon errors seems to have dropped.

Tested on a Mikrotik RB912UAGS-5HPacD

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.19 to 4.19.36
Koen Vandeputte [Mon, 22 Apr 2019 19:52:42 +0000 (21:52 +0200)]
kernel: bump 4.19 to 4.19.36

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.113
Koen Vandeputte [Mon, 22 Apr 2019 19:51:43 +0000 (21:51 +0200)]
kernel: bump 4.14 to 4.14.113

Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.170
Koen Vandeputte [Mon, 22 Apr 2019 19:18:27 +0000 (21:18 +0200)]
kernel: bump 4.9 to 4.9.170

Refreshed all patches.

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoRevert "uhttpd: disable concurrent requests by default"
Jo-Philipp Wich [Tue, 23 Apr 2019 06:12:49 +0000 (08:12 +0200)]
Revert "uhttpd: disable concurrent requests by default"

This reverts commit c6aa9ff38870a30dbe6da17e4edad6039fe10ddf.

Further testing has revealed that we will need to allow concurrent
requests after all, especially for situations where CGI processes
initiate further HTTP requests to the local host.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agoopenssl: add Eneas U de Queiroz as maintainer
Eneas U de Queiroz [Mon, 22 Apr 2019 19:28:12 +0000 (19:28 +0000)]
openssl: add Eneas U de Queiroz as maintainer

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
5 years agokernel: bump 4.19 to 4.19.35
Koen Vandeputte [Thu, 18 Apr 2019 13:05:04 +0000 (15:05 +0200)]
kernel: bump 4.19 to 4.19.35

Refreshed all patches.

Fixes:
- CVE-2019-3887

New symbol:
- CONFIG_LDISC_AUTOLOAD

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.112
Koen Vandeputte [Thu, 18 Apr 2019 13:04:42 +0000 (15:04 +0200)]
kernel: bump 4.14 to 4.14.112

Refreshed all patches.

New symbol:
- CONFIG_LDISC_AUTOLOAD

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.169
Koen Vandeputte [Thu, 18 Apr 2019 08:04:35 +0000 (10:04 +0200)]
kernel: bump 4.9 to 4.9.169

Refreshed all patches.

New symbols:
- CONFIG_LDISC_AUTOLOAD
- CONFIG_PPC_BARRIER_NOSPEC

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoopenssl: fix OPENSSL_config bug affecting wget
Eneas U de Queiroz [Mon, 22 Apr 2019 16:39:10 +0000 (16:39 +0000)]
openssl: fix OPENSSL_config bug affecting wget

This applies an upstream patch that fixes a OPENSSL_config() bug that
causes SSL initialization to fail when the openssl.cnf file is not
found.  The config file is not installed by default.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
5 years agonghttp2: bump to 1.38.0
Hans Dedecker [Mon, 22 Apr 2019 11:39:35 +0000 (13:39 +0200)]
nghttp2: bump to 1.38.0

4a9d2005 Update manual pages
acf6a922 Bump up version number to 1.38.0, LT revision to 31:3:17
4ff45821 Update AUTHORS
42dce01e Merge branch 'nghttpx-fix-backend-selection-on-retry'
a35059e3 nghttpx: Fix bug that altered authority and path affect backend selection
5a30fafd Merge branch 'nghttpx-fix-chunked-request-stall'
dce91ad3 Merge branch 'nghttpx-dont-log-authorization'
2cff8b43 nghttpx: Fix bug that chunked request stalls
be96654d nghttpx: Don't log authorization request header field value with -LINFO
ce962c3f Merge branch 'update-http-parser'
f931504e Update http-parser to v2.9.1
d978f351 Fix bug that on_header callback is still called after stream is closed
ec519f22 Merge pull request #1270 from baitisj/master
e8b213e3 Bump up version number to 1.38.0-DEV

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agotoolchain/binutils: refresh patches
Kevin Darbyshire-Bryant [Sun, 21 Apr 2019 13:57:44 +0000 (14:57 +0100)]
toolchain/binutils: refresh patches

Fix hunk offset warnings.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
5 years agoodhcpd: update to latest git HEAD (FS#2243, FS#2244)
Hans Dedecker [Fri, 19 Apr 2019 17:21:27 +0000 (19:21 +0200)]
odhcpd: update to latest git HEAD (FS#2243, FS#2244)

6633efe router: fix dns search list option

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agodropbear: allow build without dbclient
Rosy Song [Thu, 18 Apr 2019 02:20:19 +0000 (10:20 +0800)]
dropbear: allow build without dbclient

This can save ~16KBytes size for the ipk

Signed-off-by: Rosy Song <rosysong@rosinson.com>
5 years agoarmvirt64: enable qemu drm drivers
Lucian Cristian [Thu, 18 Apr 2019 04:26:23 +0000 (07:26 +0300)]
armvirt64: enable qemu drm drivers

adds the qemu video drivers and also fixes the build failure
introduced with drm-kms-helper

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
5 years agokernel: add missing drm symbol
Lucian Cristian [Thu, 18 Apr 2019 04:41:10 +0000 (07:41 +0300)]
kernel: add missing drm symbol

dependency introduced with module drm-kms-helper

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
5 years agoinclude: unpack.mk: remove CRLF_WORKAROUND
Alexandru Ardelean [Wed, 17 Apr 2019 06:11:14 +0000 (09:11 +0300)]
include: unpack.mk: remove CRLF_WORKAROUND

This patch doesn't seem to have any more users.
The only one used to be target in
`target/linux/etrax/image/e100boot/Makefile`.

That target has since been removed via commit
1080f68b2b422f1e72e402765a45d0cc3c550825 .

There doesn't seem to be any reason left for this workaround.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
5 years agomac80211: brcm: backport brcmfmac 5.2 patches
Rafał Miłecki [Thu, 18 Apr 2019 08:13:13 +0000 (10:13 +0200)]
mac80211: brcm: backport brcmfmac 5.2 patches

This includes some USB fixes and early work on FullMAC firmware crash
recovery.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years agolantiq: tdw90x0: Fix WLAN LED on TP-Link W8970 v1.2 (FS#2232)
Petr Štetiar [Wed, 10 Apr 2019 08:10:33 +0000 (10:10 +0200)]
lantiq: tdw90x0: Fix WLAN LED on TP-Link W8970 v1.2 (FS#2232)

This patch fixes disfunctional WLAN LED on TP-Link W8970. The LED was
reported working in the CC release[1], but doesn't work anymore in 18.06.2.

1. https://github.com/openwrt/chaos_calmer/commit/420cb24d41fcd650795f09d2b26e0e1d2cf21165

Tested-by: Damian Janarek <dzanar18@o2.pl>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoodhcpd: update to latest git HEAD (FS#2206)
Hans Dedecker [Wed, 17 Apr 2019 12:39:57 +0000 (14:39 +0200)]
odhcpd: update to latest git HEAD (FS#2206)

38bc630 router: use ra_lifetime as lifetime for RA options (FS#2206)
0523bdd router: improve code readibility
0a3b279 Revert "router:"
207f8e0 treewide: align syslog loglevels
f1d7da9 router:
0e048ac treewide: fix compiler warnings
83698f6 CMakeList.txt: enable extra compiler checks

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoopenssl: change defaults: ENGINE:on, NPN:off, misc
Eneas U de Queiroz [Tue, 16 Apr 2019 20:12:47 +0000 (20:12 +0000)]
openssl: change defaults: ENGINE:on, NPN:off, misc

The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Enable engine support by default.  Right now, some packages require
this, so it is always enabled by the bots.  Many packages will compile
differently when engine support is detected, needing engine symbols from
the libraries.

However, being off by default, a user compiling its own image will fail
to run some popular packages from the official repo.
Note that disabling engines did not work in 1.0.2, so this problem never
showed up before.

NPN support has been removed in major browsers & servers, and has become
a small bloat, so it does not make sense to leave it on by default.

Remove deprecated CONFIG_ENGINE_CRYPTO symbol that is no longer needed.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
5 years agokernel: Fix kmod-drm-amdgpu and kmod-drm-radeon dependencies
Lucian Cristian [Sat, 13 Apr 2019 17:26:07 +0000 (20:26 +0300)]
kernel: Fix kmod-drm-amdgpu and kmod-drm-radeon dependencies

Currently the Geode builds fails on following kernel module missing
dependencies:

 Package kmod-drm-amdgpu is missing dependencies for the following libraries:
 backlight.ko
 drm_kms_helper.ko
 fb.ko
 ttm.ko

So this patch tries to fix the kmod-drm-amdgpu module dependecies.

Fixes: 2f239c0 ("x86: video: add amdgpu DRM kernel package")
Fixes: 2f6918e ("x86: video: add radeon DRM module support")
Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
5 years agoprocd/hotplug: add dependency to dialout and audio group
Martin Schiller [Thu, 11 Apr 2019 07:54:37 +0000 (09:54 +0200)]
procd/hotplug: add dependency to dialout and audio group

Commit 6e060bd62c85 introduced a dependency to the dialout group.
Adding this group to the "group" file in the base-files package is not
enough to handle this dependency, because after a sysupgrade this entry
will be missing in the "group" file.

To address this problem the dependencies to the required groups needs to
be set in the Makefile of the procd package.
Then, the uci-default script "13_fix_group_user" will add the groups
on first boot-up after a sysupgrade.

Fixes: 6e060bd62c85 ("base-files/hotplug: fix dedicated group for tty devices")
Tested-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
5 years agonetifd: update to latest git HEAD
Hans Dedecker [Mon, 15 Apr 2019 21:18:36 +0000 (23:18 +0200)]
netifd: update to latest git HEAD

666c14f system-linux: remove debug tracing
08989e4 interface: add neighbor config support
bfd4de3 interface: fix "if-down" hotplug event handling

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agolayerscape: unbreak ehci-fsl interaction with mpc85xx
Christian Lamparter [Sun, 14 Apr 2019 20:34:52 +0000 (22:34 +0200)]
layerscape: unbreak ehci-fsl interaction with mpc85xx

Both targets have their own idea of how to use ehci-fsl.
This patch reverts part of commit
68b8d3b0796d ("kernel: usb: add FSL EHCI package") and moves
ehci-fsl back into kmod-usb2, while also making it hopefully
useable for the mpc85xx target.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agompc85xx: disable bricking TL-WDR4900v1 images
Christian Lamparter [Sun, 14 Apr 2019 21:54:33 +0000 (23:54 +0200)]
mpc85xx: disable bricking TL-WDR4900v1 images

The current mpc85xx build is failing because the
TL-WDR4900v1 kernel image no longer fits into the
partition. Extending the kernel is not possible
without updating u-boot's kernel loader commands.

This patch disables the WDR4900v1 until the kernel
image size issue is fixed so the buildbot can still
compile the Sophos RED 15w Rev.1 . Installing the
WDR4900v1 images would cause the routers to get
bricked.

For the discussion, please go to:
<https://github.com/openwrt/openwrt/pull/1773>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agokernel: MIPS: perf: ath79: Fix perfcount IRQ assignment
Petr Štetiar [Thu, 11 Apr 2019 20:34:46 +0000 (22:34 +0200)]
kernel: MIPS: perf: ath79: Fix perfcount IRQ assignment

Currently it's not possible to use perf on ath79 due to genirq flags
mismatch happening on static virtual IRQ 13 which is used for
performance counters hardware IRQ 5.

On TP-Link Archer C7v5:

           CPU0
  2:          0      MIPS   2  ath9k
  4:        318      MIPS   4  19000000.eth
  7:      55034      MIPS   7  timer
  8:       1236      MISC   3  ttyS0
 12:          0      INTC   1  ehci_hcd:usb1
 13:          0  gpio-ath79   2  keys
 14:          0  gpio-ath79   5  keys
 15:         31  AR724X PCI    1  ath10k_pci

 $ perf top
 genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)

On TP-Link Archer C7v4:

         CPU0
  4:          0      MIPS   4  19000000.eth
  5:       7135      MIPS   5  1a000000.eth
  7:      98379      MIPS   7  timer
  8:         30      MISC   3  ttyS0
 12:      90028      INTC   0  ath9k
 13:       5520      INTC   1  ehci_hcd:usb1
 14:       4623      INTC   2  ehci_hcd:usb2
 15:      32844  AR724X PCI    1  ath10k_pci
 16:          0  gpio-ath79  16  keys
 23:          0  gpio-ath79  23  keys

 $ perf top
 genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)

This problem is happening, because currently statically assigned virtual
IRQ 13 for performance counters is not claimed during the initialization
of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
this interrupt isn't available for further use.

So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoumbim: update to latest git HEAD
Petr Štetiar [Thu, 11 Apr 2019 20:06:45 +0000 (22:06 +0200)]
umbim: update to latest git HEAD

24f9dc7 Iron out all extra compiler warnings
9d8dbc9 Enable extra compiler checks
ff8d356 mbim-proxy support
ccca03f umbim: add registration set support

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoRevert "ath79: Add WPS button to TP-Link Archer C7v5"
Petr Štetiar [Tue, 9 Apr 2019 12:24:11 +0000 (14:24 +0200)]
Revert "ath79: Add WPS button to TP-Link Archer C7v5"

Reverting this commit as I've missed the fact, that the button is
already present in the included DTSI file.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agomac80211: Fix rate_idx underflow in mwl8k (FS#2218)
Petr Štetiar [Mon, 8 Apr 2019 08:20:32 +0000 (10:20 +0200)]
mac80211: Fix rate_idx underflow in mwl8k (FS#2218)

Add a patch for mwl8k which fixes endless reboot loops on Linksys EA4500
with certain 5G configurations.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoramips: add support for Rakwireless RAK633
Eike Feldmann [Tue, 26 Feb 2019 22:04:53 +0000 (23:04 +0100)]
ramips: add support for Rakwireless RAK633

It's OEM module with 2*26 pin header, similar to LinkIt Smart 7688 or
Vocore2.

Specification:

CPU:       MT7628 580 MHz. MIPS 24K
RAM:       64 MB
Flash:     8 MB
WIFI:      802.11n/g/b 20/40 MHz
USB:       1x Port USB 2.0
Ethernet:  5 Port ethernet switch
UART:      2x

Installation: Use the installed uboot Bootloader. Connect a serial cable
to serialport 0. Turn power on.  Choose the option: "Load system code
then write to Flash via TFTP".  Choose the local device IP and the TFTP
server IP and the file name of the system image.  After if the
Bootloader will copy the image to the local flash.

Notes: The I2C Kernel module work not correctly. You can send and
receive data. But the command i2cdetect doesn’t work. FS#845

Signed-off-by: Eike Feldmann <eike.feldmann@outlook.com>
[commit subject and message touches, DTS whitespace fixes, wifi LED
rename, pinctrl fixes, network settings fixes, lan/wmac mac addresses,
removed i2c kernel modules]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoramips: add support for GL.iNet VIXMINI
David Bauer [Fri, 12 Apr 2019 22:05:47 +0000 (00:05 +0200)]
ramips: add support for GL.iNet VIXMINI

Hardware
--------
SoC:   MediaTek MT7628NN
RAM:   64M DDR2 (Etron EM68B16CWQD-25H)
FLASH: 8M (Winbond W25Q64JVSIQ)
LED:   Power - WLAN
BTN:   Reset
UART:  115200 8N1
       TX and RX are labled on the board as pads next to the SoC

Installation via web-interface
------------------------------
1. Visit the web-interface at 192.168.8.1
   Note: The ethernet port is by default WAN. So you need to connect to
   the router via WiFi

2. Navigate to the Update tab on the left side.

3. Select "Local Update"

4. Upload the OpenWrt sysupgrade image.
   Note: Make sure you select not to preserve the configuration.

Installation via U-Boot
-----------------------
1. Hold down the reset button while powering on the device.
   Wait for the LED to flash 5 times.

2. Assign yourself a static IPv4 in 192.168.1.0/24

3. Upload the OpenWrt sysupgrade image at 192.168.1.1.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agompc85xx: generic: Check kernel size for the TL-WDR4900
Pawel Dembicki [Tue, 29 Jan 2019 18:26:28 +0000 (18:26 +0000)]
mpc85xx: generic: Check kernel size for the TL-WDR4900

TP-Link TL-WDR 4900 have u-boot with read-only env.
Boot command read only 0x29F000 data from flash.
Bigger images causes crc error. It can't be changed.

This patch add kernel size checking.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [utilize KERNEL_SIZE]
5 years agompc85xx: clean up device package selection
David Bauer [Mon, 8 Apr 2019 18:09:35 +0000 (20:09 +0200)]
mpc85xx: clean up device package selection

Remove wireless and USB packages from the device-specific package
selection as they are already selected by the target itself.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agompc85xx: remove USB support from kernel
David Bauer [Mon, 8 Apr 2019 18:09:34 +0000 (20:09 +0200)]
mpc85xx: remove USB support from kernel

This removes USB support from the compiled kernel. Because of this, the
kernel is just small enough for the TP-Link WDR4900 to boot the
resulting kernel.

This is necessary to support the WDR4900 in the upcoming 19.xx release.
In the long run, this should be fixed with a second stage bootloader, as
the vendor bootloader only loads the first 2684k bytes.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agokernel: usb: add FSL EHCI package
David Bauer [Mon, 8 Apr 2019 18:09:33 +0000 (20:09 +0200)]
kernel: usb: add FSL EHCI package

Add kernel module package for the Freescale USB2 EHCI used on the
mpc85xx platform.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoath79: remove unnecessary packages from I-O DATA ETG3-R
INAGAKI Hiroshi [Sat, 13 Apr 2019 03:21:02 +0000 (12:21 +0900)]
ath79: remove unnecessary packages from I-O DATA ETG3-R

I-O DATA ETG3-R is a wired router. So wireless-related packages are
unnecessary and remove those packages from default configuration to
reduce flash usage.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
5 years agoath79: add TP-Link WR842N v3
Sven Roederer [Sun, 24 Mar 2019 23:03:19 +0000 (00:03 +0100)]
ath79: add TP-Link WR842N v3

This adds support for the TP-Link WR842N v3 which is already supported on ar71xx
target (0b45bec22c59cc6e6b2fa71dc9a88386c5587132).

Specification:
* SoC: QCA9533 ver 2 rev 0
* 16 MB Flash (gd25q128)
* 64 MB RAM
* 1 WAN 10/100 MBit/s (blue connector)
* 4 LAN 10/100 MBit/s (AR8229; 4 ports; yellow connectors)
* Atheros AR9531 (2,4GHz, two fixed antennas)
* USB
* Reset / WPS button
* WiFi button (rf kill)
* 8 green leds; 1 red/green led
* serial console (115200 8N1, according to the OpenWrt-wiki some soldering is needed)

Installation:
* flash via vendor WebUI (the filename must not exceed certain length)
* sysupgrade from installed OpenWrt (also ar71xx)

Thanks to Holger Drefs for providing the hardware

Tested-by: @kofec (github)
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
5 years agomac80211: rt2x00: replace patch with upstream version
Daniel Golle [Fri, 12 Apr 2019 20:07:29 +0000 (22:07 +0200)]
mac80211: rt2x00: replace patch with upstream version

Replace the patch introduced by commit d0b969eee8 ("mac80211: rt2x00:
do not increment sequence number while re-transmitting") was merged
into wireless-drivers.git. Replace our version with the merged version.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agoramips: fix pinctrl to allow hardware i2c on WRTNODE2R
Daniel Golle [Thu, 11 Apr 2019 20:26:28 +0000 (22:26 +0200)]
ramips: fix pinctrl to allow hardware i2c on WRTNODE2R

Instead of assigning I2C pins as GPIOs by default, leave it up to the
user whether to install kmod-i2c-mt7621 and use them for hardware I2C
instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agokernel: move and replace accepted patch
Daniel Golle [Thu, 11 Apr 2019 17:19:49 +0000 (19:19 +0200)]
kernel: move and replace accepted patch

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agouboot-envtools: fix fw_env.config for ox820/stg-212
Daniel Golle [Tue, 9 Apr 2019 19:09:02 +0000 (21:09 +0200)]
uboot-envtools: fix fw_env.config for ox820/stg-212

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agobuild: switch default target from ar71xx to ath79
Kevin Darbyshire-Bryant [Thu, 11 Apr 2019 15:38:01 +0000 (16:38 +0100)]
build: switch default target from ar71xx to ath79

ar71xx is in the process of being deprecated as a target accepting new
devices.  The replacement target for the same hardware is DTS
based ath79.

Switch the default build target selection from ar71xx to ath79.

This is intended to encourage DTS takeup & support for ath79 and longer
term will also aid kernel upstream support.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
5 years agohostapd: fix CVE-2019-9497, CVE-2019-9498, CVE-2019-9499
Stefan Lippers-Hollmann [Thu, 11 Apr 2019 00:57:09 +0000 (02:57 +0200)]
hostapd: fix CVE-2019-9497, CVE-2019-9498, CVE-2019-9499

EAP-pwd missing commit validation

Published: April 10, 2019
Identifiers:
- CVE-2019-9497 (EAP-pwd server not checking for reflection attack)
- CVE-2019-9498 (EAP-pwd server missing commit validation for
  scalar/element)
- CVE-2019-9499 (EAP-pwd peer missing commit validation for
  scalar/element)

Latest version available from: https://w1.fi/security/2019-4/

Vulnerability

EAP-pwd implementation in hostapd (EAP server) and wpa_supplicant (EAP
peer) was discovered not to validate the received scalar and element
values in EAP-pwd-Commit messages properly. This could result in attacks
that would be able to complete EAP-pwd authentication exchange without
the attacker having to know the used password.

A reflection attack is possible against the EAP-pwd server since the
hostapd EAP server did not verify that the EAP-pwd-Commit contains
scalar/element values that differ from the ones the server sent out
itself. This allows the attacker to complete EAP-pwd authentication
without knowing the password, but this does not result in the attacker
being able to derive the session key (MSK), i.e., the attacker would not
be able to complete the following key exchange (e.g., 4-way handshake in
RSN/WPA).

An attack using invalid scalar/element values is possible against both
the EAP-pwd server and peer since hostapd and wpa_supplicant did not
validate these values in the received EAP-pwd-Commit messages. If the
used crypto library does not implement additional checks for the element
(EC point), this could result in attacks where the attacker could use a
specially crafted commit message values to manipulate the exchange to
result in deriving a session key value from a very small set of possible
values. This could further be used to attack the EAP-pwd server in a
practical manner. An attack against the EAP-pwd peer is slightly more
complex, but still consider practical. These invalid scalar/element
attacks could result in the attacker being able to complete
authentication and learn the session key and MSK to allow the key
exchange to be completed as well, i.e., the attacker gaining access to
the network in case of the attack against the EAP server or the attacker
being able to operate a rogue AP in case of the attack against the EAP
peer.

While similar attacks might be applicable against SAE, it should be
noted that the SAE implementation in hostapd and wpa_supplicant does
have the validation steps that were missing from the EAP-pwd
implementation and as such, these attacks do not apply to the current
SAE implementation. Old versions of wpa_supplicant/hostapd did not
include the reflection attack check in the SAE implementation, though,
since that was added in June 2015 for v2.5 (commit 6a58444d27fd 'SAE:
Verify that own/peer commit-scalar and COMMIT-ELEMENT are different').

Vulnerable versions/configurations

All hostapd versions with EAP-pwd support (CONFIG_EAP_PWD=y in the build
configuration and EAP-pwd being enabled in the runtime configuration)
are vulnerable against the reflection attack.

All wpa_supplicant and hostapd versions with EAP-pwd support
(CONFIG_EAP_PWD=y in the build configuration and EAP-pwd being enabled
in the runtime configuration) are vulnerable against the invalid
scalar/element attack when built against a crypto library that does not
have an explicit validation step on imported EC points. The following
list indicates which cases are vulnerable/not vulnerable:
- OpenSSL v1.0.2 or older: vulnerable
- OpenSSL v1.1.0 or newer: not vulnerable
- BoringSSL with commit 38feb990a183 ('Require that EC points are on the
  curve.') from September 2015: not vulnerable
- BoringSSL without commit 38feb990a183: vulnerable
- LibreSSL: vulnerable
- wolfssl: vulnerable

Acknowledgments

Thanks to Mathy Vanhoef (New York University Abu Dhabi) for discovering
and reporting the issues and for proposing changes to address them in
the implementation.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  CVE-2019-9497:
  EAP-pwd server: Detect reflection attacks

  CVE-2019-9498:
  EAP-pwd server: Verify received scalar and element
  EAP-pwd: Check element x,y coordinates explicitly

  CVE-2019-9499:
  EAP-pwd client: Verify received scalar and element
  EAP-pwd: Check element x,y coordinates explicitly

  These patches are available from https://w1.fi/security/2019-4/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agohostapd: fix CVE-2019-9496
Stefan Lippers-Hollmann [Thu, 11 Apr 2019 00:56:37 +0000 (02:56 +0200)]
hostapd: fix CVE-2019-9496

hostapd: fix SAE confirm missing state validation

Published: April 10, 2019
Identifiers:
- CVE-2019-9496 (SAE confirm missing state validation in hostapd/AP)
Latest version available from: https://w1.fi/security/2019-3/

Vulnerability

When hostapd is used to operate an access point with SAE (Simultaneous
Authentication of Equals; also known as WPA3-Personal), an invalid
authentication sequence could result in the hostapd process terminating
due to a NULL pointer dereference when processing SAE confirm
message. This was caused by missing state validation steps when
processing the SAE confirm message in hostapd/AP mode.

Similar cases against the wpa_supplicant SAE station implementation had
already been tested by the hwsim test cases, but those sequences did not
trigger this specific code path in AP mode which is why the issue was
not discovered earlier.

An attacker in radio range of an access point using hostapd in SAE
configuration could use this issue to perform a denial of service attack
by forcing the hostapd process to terminate.

Vulnerable versions/configurations

All hostapd versions with SAE support (CONFIG_SAE=y in the build
configuration and SAE being enabled in the runtime configuration).

Possible mitigation steps

- Merge the following commit to hostapd and rebuild:

  SAE: Fix confirm message validation in error cases

  These patches are available from https://w1.fi/security/2019-3/

- Update to hostapd v2.8 or newer, once available

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agohostapd: fix CVE-2019-9495
Stefan Lippers-Hollmann [Thu, 11 Apr 2019 00:55:12 +0000 (02:55 +0200)]
hostapd: fix CVE-2019-9495

EAP-pwd side-channel attack

Published: April 10, 2019
Identifiers:
- CVE-2019-9495 (cache attack against EAP-pwd)
Latest version available from: https://w1.fi/security/2019-2/

Vulnerability

Number of potential side channel attacks were recently discovered in the
SAE implementations used by both hostapd and wpa_supplicant (see
security advisory 2019-1 and VU#871675). EAP-pwd uses a similar design
for deriving PWE from the password and while a specific attack against
EAP-pwd is not yet known to be tested, there is no reason to believe
that the EAP-pwd implementation would be immune against the type of
cache attack that was identified for the SAE implementation. Since the
EAP-pwd implementation in hostapd (EAP server) and wpa_supplicant (EAP
peer) does not support MODP groups, the timing attack described against
SAE is not applicable for the EAP-pwd implementation.

A novel cache-based attack against SAE handshake would likely be
applicable against the EAP-pwd implementation. Even though the
wpa_supplicant/hostapd PWE derivation iteration for EAP-pwd has
protections against timing attacks, this new cache-based attack might
enable an attacker to determine which code branch is taken in the
iteration if the attacker is able to run unprivileged code on the victim
machine (e.g., an app installed on a smart phone or potentially a
JavaScript code on a web site loaded by a web browser). This depends on
the used CPU not providing sufficient protection to prevent unprivileged
applications from observing memory access patterns through the shared
cache (which is the most likely case with today's designs).

The attacker could use information about the selected branch to learn
information about the password and combine this information from number
of handshake instances with an offline dictionary attack. With
sufficient number of handshakes and sufficiently weak password, this
might result in full recovery of the used password if that password is
not strong enough to protect against dictionary attacks.

This attack requires the attacker to be able to run a program on the
target device. This is not commonly the case on an authentication server
(EAP server), so the most likely target for this would be a client
device using EAP-pwd.

The commits listed in the end of this advisory change the EAP-pwd
implementation shared by hostapd and wpa_supplicant to perform the PWE
derivation loop using operations that use constant time and memory
access pattern to minimize the externally observable differences from
operations that depend on the password even for the case where the
attacker might be able to run unprivileged code on the same device.

Vulnerable versions/configurations

All wpa_supplicant and hostapd versions with EAP-pwd support
(CONFIG_EAP_PWD=y in the build configuration and EAP-pwd being enabled
in the runtime configuration).

It should also be noted that older versions of wpa_supplicant/hostapd
prior to v2.7 did not include additional protection against certain
timing differences. The definition of the EAP-pwd (RFC 5931) does not
describe such protection, but the same issue that was addressed in SAE
earlier can be applicable against EAP-pwd as well and as such, that
implementation specific extra protection (commit 22ac3dfebf7b, "EAP-pwd:
Mask timing of PWE derivation") is needed to avoid showing externally
visible timing differences that could leak information about the
password. Any uses of older wpa_supplicant/hostapd versions with EAP-pwd
are recommended to update to v2.7 or newer in addition to the mitigation
steps listed below for the more recently discovered issue.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  OpenSSL: Use constant time operations for private bignums
  Add helper functions for constant time operations
  OpenSSL: Use constant time selection for crypto_bignum_legendre()
  EAP-pwd: Use constant time and memory access for finding the PWE

  These patches are available from https://w1.fi/security/2019-2/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

- Use strong passwords to prevent dictionary attacks

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agohostapd: fix CVE-2019-9494
Stefan Lippers-Hollmann [Thu, 11 Apr 2019 00:53:10 +0000 (02:53 +0200)]
hostapd: fix CVE-2019-9494

SAE side-channel attacks

Published: April 10, 2019
Identifiers:
- VU#871675
- CVE-2019-9494 (cache attack against SAE)
Latest version available from: https://w1.fi/security/2019-1/

Vulnerability

Number of potential side channel attacks were discovered in the SAE
implementations used by both hostapd (AP) and wpa_supplicant
(infrastructure BSS station/mesh station). SAE (Simultaneous
Authentication of Equals) is also known as WPA3-Personal. The discovered
side channel attacks may be able to leak information about the used
password based on observable timing differences and cache access
patterns. This might result in full password recovery when combined with
an offline dictionary attack and if the password is not strong enough to
protect against dictionary attacks.

Cache attack

A novel cache-based attack against SAE handshake was discovered. This
attack targets SAE with ECC groups. ECC group 19 being the mandatory
group to support and the most likely used group for SAE today, so this
attack applies to the most common SAE use case. Even though the PWE
derivation iteration in SAE has protections against timing attacks, this
new cache-based attack enables an attacker to determine which code
branch is taken in the iteration if the attacker is able to run
unprivileged code on the victim machine (e.g., an app installed on a
smart phone or potentially a JavaScript code on a web site loaded by a
web browser). This depends on the used CPU not providing sufficient
protection to prevent unprivileged applications from observing memory
access patterns through the shared cache (which is the most likely case
with today's designs).

The attacker can use information about the selected branch to learn
information about the password and combine this information from number
of handshake instances with an offline dictionary attack. With
sufficient number of handshakes and sufficiently weak password, this
might result in full discovery of the used password.

This attack requires the attacker to be able to run a program on the
target device. This is not commonly the case on access points, so the
most likely target for this would be a client device using SAE in an
infrastructure BSS or mesh BSS.

The commits listed in the end of this advisory change the SAE
implementation shared by hostapd and wpa_supplicant to perform the PWE
derivation loop using operations that use constant time and memory
access pattern to minimize the externally observable differences from
operations that depend on the password even for the case where the
attacker might be able to run unprivileged code on the same device.

Timing attack

The timing attack applies to the MODP groups 22, 23, and 24 where the
PWE generation algorithm defined for SAE can have sufficient timing
differences for an attacker to be able to determine how many rounds were
needed to find the PWE based on the used password and MAC
addresses. When the attack is repeated with multiple times, the attacker
may be able to gather enough information about the password to be able
to recover it fully using an offline dictionary attack if the password
is not strong enough to protect against dictionary attacks. This attack
could be performed by an attacker in radio range of an access point or a
station enabling the specific MODP groups.

This timing attack requires the applicable MODP groups to be enabled
explicitly in hostapd/wpa_supplicant configuration (sae_groups
parameter). All versions of hostapd/wpa_supplicant have disabled these
groups by default.

While this security advisory lists couple of commits introducing
additional protection for MODP groups in SAE, it should be noted that
the groups 22, 23, and 24 are not considered strong enough to meet the
current expectation for a secure system. As such, their use is
discouraged even if the additional protection mechanisms in the
implementation are included.

Vulnerable versions/configurations

All wpa_supplicant and hostapd versions with SAE support (CONFIG_SAE=y
in the build configuration and SAE being enabled in the runtime
configuration).

Acknowledgments

Thanks to Mathy Vanhoef (New York University Abu Dhabi) and Eyal Ronen
(Tel Aviv University) for discovering the issues and for discussions on
how to address them.

Possible mitigation steps

- Merge the following commits to wpa_supplicant/hostapd and rebuild:

  OpenSSL: Use constant time operations for private bignums
  Add helper functions for constant time operations
  OpenSSL: Use constant time selection for crypto_bignum_legendre()
  SAE: Minimize timing differences in PWE derivation
  SAE: Avoid branches in is_quadratic_residue_blind()
  SAE: Mask timing of MODP groups 22, 23, 24
  SAE: Use const_time selection for PWE in FFC
  SAE: Use constant time operations in sae_test_pwd_seed_ffc()

  These patches are available from https://w1.fi/security/2019-1/

- Update to wpa_supplicant/hostapd v2.8 or newer, once available

- In addition to either of the above alternatives, disable MODP groups
  1, 2, 5, 22, 23, and 24 by removing them from hostapd/wpa_supplicant
  sae_groups runtime configuration parameter, if they were explicitly
  enabled since those groups are not considered strong enough to meet
  current security expectations. The groups 22, 23, and 24 are related
  to the discovered side channel (timing) attack. The other groups in
  the list are consider too weak to provide sufficient security. Note
  that all these groups have been disabled by default in all
  hostapd/wpa_supplicant versions and these would be used only if
  explicitly enabled in the configuration.

- Use strong passwords to prevent dictionary attacks

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
[bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agoprocd: update to latest git HEAD
Hans Dedecker [Wed, 10 Apr 2019 11:40:43 +0000 (13:40 +0200)]
procd: update to latest git HEAD

baaf38c procd: instance: Support deleting stopped instances

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agowireguard: remove obvious comments
Florian Eckert [Tue, 9 Apr 2019 09:00:37 +0000 (11:00 +0200)]
wireguard: remove obvious comments

Remove obvious comments to save disk space.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
5 years agowireguard: converted whitespaces from space to tab
Florian Eckert [Tue, 9 Apr 2019 08:52:03 +0000 (10:52 +0200)]
wireguard: converted whitespaces from space to tab

With this change, the file is reduced from 5186 bytes to 4649 bytes that
its approximately 10.5 percent less memory consumption. For small
devices, sometimes every byte counts.
Also, all other protocol handler use tabs instead of spaces.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
5 years agoethtool: bump to 5.0
Hans Dedecker [Mon, 8 Apr 2019 08:06:46 +0000 (10:06 +0200)]
ethtool: bump to 5.0

170d821 Release version 5.0.
909f8c0 Revert "ethtool: change to new sane powerpc64 kernel headers"
a484274 ethtool: dsa: mv88e6xxx: add pretty dump for others
034a17b ethtool: dsa: mv88e6xxx: add pretty dump for 88E6390
7f1cc44 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6352
a13a053 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6161
4e98029 ethtool: dsa: mv88e6xxx: add pretty dump for 88E6185
ff99e46 ethtool: dsa: mv88e6xxx: add pretty dump
cb8e980 ethtool: dsa: add pretty dump
4df55c8 ethtool: change to new sane powerpc64 kernel headers
0cb963e ethtool: zero initialize coalesce struct
8f05538 ethtool: don't report UFO on kernels v4.14 and above

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoimx6: bump sdma firmware to 3.4
Koen Vandeputte [Mon, 8 Apr 2019 16:06:38 +0000 (18:06 +0200)]
imx6: bump sdma firmware to 3.4

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agoath79: add support for Netgear EX6400 and EX7300
Daniel Gimpelevich [Fri, 14 Sep 2018 04:08:51 +0000 (21:08 -0700)]
ath79: add support for Netgear EX6400 and EX7300

This is sold as a dual-band 802.11ac range extender. It has a sliding
switch for Extender mode or Access Point mode, a WPS button, a recessed
Reset button, a hard-power button, and a multitude of LED's, some
multiplexed via an NXP 74AHC164D chip. The internal serial header pinout is
Vcc, Tx, Rx, GND, with GND closest to the corner of the board. You may
connect at 115200 bps, 8 data bits, no parity, 1 stop bit.

Specification:
- System-On-Chip: QCA9558
- CPU/Speed: 720 MHz
- Flash-Chip: Winbond 25Q128FVSG
- Flash size: 16 MiB
- RAM: 128 MiB
- Wireless No1: QCA9558 on-chip 2.4GHz 802.11bgn, 3x3
- Wireless No2: QCA99x0 chip 5GHz 802.11an+ac, 4x4
- PHY: Atheros AR8035-A

Installation:
If you can get to the stock firmware's firmware upgrade option, just feed
it the factory.img and boot as usual. As an alternative, TFTP the
factory.img to the bootloader.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[whitespace fix in DTS and reorder of make variables]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoath79: remove more duplicate image build variables
Daniel Gimpelevich [Wed, 2 Jan 2019 22:19:04 +0000 (14:19 -0800)]
ath79: remove more duplicate image build variables

Remove Netgear-specific image build variables which are set to the same
value.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[reordering of variables, removed stray newline]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agosunxi: Remove already applied patch
Hauke Mehrtens [Mon, 8 Apr 2019 18:18:37 +0000 (20:18 +0200)]
sunxi: Remove already applied patch

This patch is already included in kernel v4.19.31.

Fixes: 8df12d76c642 ("kernel: bump 4.19 to 4.19.34")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoscripts/qemustart: Allow specifying custom rootfs for malta
Petr Štetiar [Thu, 28 Mar 2019 21:13:26 +0000 (21:13 +0000)]
scripts/qemustart: Allow specifying custom rootfs for malta

Currently it's not possible to test boot squashfs root images, so this
patch now allows this use case as well.

Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoscripts/qemustart: Allow specifying custom kernel for x86
Petr Štetiar [Thu, 28 Mar 2019 20:51:34 +0000 (20:51 +0000)]
scripts/qemustart: Allow specifying custom kernel for x86

Currently it's not possible to test boot squashfs root images, so this
patch now allows this use case as well.

Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>