openwrt/staging/kaloz.git
7 years agosamba36: Don't resolve interfaces.
Rosen Penev [Thu, 24 Aug 2017 23:51:24 +0000 (16:51 -0700)]
samba36: Don't resolve interfaces.

It's redundant and also buggy. IPv6 link local addresses and ::1 are not resolved for example. Doesn't matter since lo and br-lan for example, resolve to them.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agosamba36: Remove guest ok since LuCI configures it.
Rosen Penev [Thu, 24 Aug 2017 23:51:23 +0000 (16:51 -0700)]
samba36: Remove guest ok since LuCI configures it.

guest ok is set per share and as such, don't override it. also, fix an error introduced in the last commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 years agoramips: merge mt7628/mt7688 into mt76x8
L. D. Pinney [Sat, 26 Aug 2017 01:49:45 +0000 (09:49 +0800)]
ramips: merge mt7628/mt7688 into mt76x8

The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi"

They are essentially a single subtarget.

This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
7 years agokernel: update 4.9 to 4.9.45
Koen Vandeputte [Mon, 28 Aug 2017 11:37:07 +0000 (13:37 +0200)]
kernel: update 4.9 to 4.9.45

Refreshed all patches

Compiled & run-tested on targets: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agodnsmasq: forward.c: fix CVE-2017-13704
Kevin Darbyshire-Bryant [Tue, 29 Aug 2017 13:29:18 +0000 (14:29 +0100)]
dnsmasq: forward.c: fix CVE-2017-13704

Fix SIGSEGV in rfc1035.c answer_request() line 1228 where memset()
is called with header & limit pointing at the same address and thus
tries to clear memory from before the buffer begins.

answer_request() is called with an invalid edns packet size provided by
the client.  Ensure the udp_size provided by the client is bounded by
512 and configured maximum as per RFC 6891 6.2.3 "Values lower than 512
MUST be treated as equal to 512"

The client that exposed the problem provided a payload udp size of 0.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomediatek: various additional ethernet fixes
John Crispin [Wed, 30 Aug 2017 07:02:39 +0000 (09:02 +0200)]
mediatek: various additional ethernet fixes

* fixes default affinity
* adds a napi watchdog - we were seeing stalled TX queues
* adds up/down locking

Signed-off-by: John Crispin <john@phrozen.org>
7 years agonetifd: update to git HEAD version
Hans Dedecker [Tue, 29 Aug 2017 19:14:54 +0000 (21:14 +0200)]
netifd: update to git HEAD version

7d94ede system-linux: parse map-e fmrs parameters as nested data json object

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomap: use nested json data object to store map-e fmrs parameters
Hans Dedecker [Sun, 27 Aug 2017 16:52:57 +0000 (18:52 +0200)]
map: use nested json data object to store map-e fmrs parameters

Replace the string array containing the fmrs parameters by a nested data
json object holding an array of fmrs parameters

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agolantiq: ACMP252: clean up device modules
Daniel Golle [Wed, 16 Aug 2017 11:06:13 +0000 (13:06 +0200)]
lantiq: ACMP252: clean up device modules

Install kmod-rt2800-pci instead of only the rt2x00 library.
Fixes missing wireless interface on AudioCodes AC-MP252.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agolantiq: ltq-ptm: fix ADSL showtime handler
Daniel Golle [Wed, 16 Aug 2017 18:56:27 +0000 (20:56 +0200)]
lantiq: ltq-ptm: fix ADSL showtime handler

commit 2d6c7c2526b6 introduced a reference to g_xdata_addr which isn't
defined in that context. Use xdata_addr here instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agomap: fix boolean argument passed to blobmsg_check_attr in mapcalc
Hans Dedecker [Sat, 26 Aug 2017 07:21:52 +0000 (09:21 +0200)]
map: fix boolean argument passed to blobmsg_check_attr in mapcalc

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoconfig: make CONFIG_ALL_* select other CONIFG_ALL_* options
Hauke Mehrtens [Sat, 15 Jul 2017 20:54:33 +0000 (22:54 +0200)]
config: make CONFIG_ALL_* select other CONIFG_ALL_* options

Select the other CONFIG_ALL_* options in the hierarchy when the master
option is selected. Currently CONFIG_ALL_KMODS is not selected when the
build bot selects CONFIG_ALL_NONSHARED for example.

Now the rtc kmods should get build when CONFIG_ALL_KMODS,
CONFIG_ALL_NONSHARED or CONFIG_ALL and CONFIG_RTC_SUPPORT are selected
like it is done by the build bots for targets with rtc support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
7 years agolayerscape: do not add custom CFLAGS.
Hauke Mehrtens [Sat, 15 Jul 2017 20:52:52 +0000 (22:52 +0200)]
layerscape: do not add custom CFLAGS.

The selected CFLAGS are already set by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm2708: bcm2710: do not activate neon-vfpv4 manually
Hauke Mehrtens [Sat, 15 Jul 2017 20:52:21 +0000 (22:52 +0200)]
brcm2708: bcm2710: do not activate neon-vfpv4 manually

Neon and vfpv4 support are activated by GCC on all ARMv8 CPUs because
this is now a mandatory part of the architecture. There is not need to
activate is manually.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm63xx: Add Comtrend AR-5315u support
Daniel Gonzalez Cabanelas [Sat, 12 Aug 2017 10:40:22 +0000 (12:40 +0200)]
brcm63xx: Add Comtrend AR-5315u support

Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years agodnsmasq: fix indentation
Hans Dedecker [Fri, 25 Aug 2017 12:21:48 +0000 (14:21 +0200)]
dnsmasq: fix indentation

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agodnsmasq: add support for multiple tags for each host.
Kuang Rufan [Fri, 25 Aug 2017 06:10:21 +0000 (14:10 +0800)]
dnsmasq: add support for multiple tags for each host.

Currently, dnsmasq support assigning multiple tags to a host record
(--dhcp-host), but we only support only 1 tag for a host. The commit
makes the following config to be valid:

  config host
      option name 'computer'
      option mac '00:11:22:33:44:55'
      option ip '192.168.1.100'
      list tag 'vendor_class'
      list tag 'vendor_id'

  config tag 'vendor_class'
      list dhcp_option 'option:vendor-class,00:...<omitted>'

  config tag 'vendor_id'
      option force '1'
      list dhcp_option 'option:vendor-id-encap,00:...<omitted>'

Signed-off-by: Kuang Rufan <kuangrufan@pset.suntec.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agof2fs-tools: fix mkfs.f2fs on big-endian systems
Stijn Tintel [Thu, 24 Aug 2017 07:04:15 +0000 (10:04 +0300)]
f2fs-tools: fix mkfs.f2fs on big-endian systems

Fixes: FS#749
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agof2fs-tools: drop musl compat patch
Stijn Tintel [Thu, 24 Aug 2017 06:56:49 +0000 (09:56 +0300)]
f2fs-tools: drop musl compat patch

It is no longer needed since version 1.4.1.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agof2fs-tools: drop patch in favour of CONFIGURE_VARS
Stijn Tintel [Thu, 24 Aug 2017 06:23:32 +0000 (09:23 +0300)]
f2fs-tools: drop patch in favour of CONFIGURE_VARS

Override the failing check in configure with CONFIGURE_VARS instead of
carrying a patch that's unlikely to be accepted by upstream.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
7 years agomap: add ealen as configurable uci parameter
Hans Dedecker [Thu, 24 Aug 2017 18:53:36 +0000 (20:53 +0200)]
map: add ealen as configurable uci parameter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: refresh kernel patches
John Crispin [Thu, 24 Aug 2017 08:09:46 +0000 (10:09 +0200)]
ramips: refresh kernel patches

the reordering patch fixes random kernel hangs. bug/fix was reported by MTK/WCN.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoipq806x: Archer C2600: fix switch ports numbering
Baptiste Jonglez [Wed, 23 Aug 2017 21:44:52 +0000 (23:44 +0200)]
ipq806x: Archer C2600: fix switch ports numbering

The order of LAN ports shown in Luci is reversed compared to what is
written on the case of the device.  Fix the order so that they match.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
7 years agoxtables-addons: update to version 2.13
Koen Vandeputte [Tue, 22 Aug 2017 14:37:32 +0000 (16:37 +0200)]
xtables-addons: update to version 2.13

Changes:

89d1b80 xt_condition: namespace support #2
c839e87 xt_geoip: check for allocation overflow
a587f95 compat_xtables: use more accurate printf format for NIPQUAD
1874fcd xt_DNETMAP: fix a buffer overflow
21ea7b7 xt_LOGMARK: resolve new gcc7 warnings
ee8da2b build: support for Linux 4.12
19a4359 xt_condition: add support for namespaces
1b37966 xt_psd: resolve compiler warning

Tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoramips: make mt7621 select WEAK_REORDERING_BEYOND_LLSC
John Crispin [Thu, 24 Aug 2017 06:32:54 +0000 (08:32 +0200)]
ramips: make mt7621 select WEAK_REORDERING_BEYOND_LLSC

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoRevert "iputils: switch to new upstream"
John Crispin [Thu, 24 Aug 2017 06:08:42 +0000 (08:08 +0200)]
Revert "iputils: switch to new upstream"

This reverts commit 77d3ac8e3ecd7989a7cffb575c4a42bc68190b6c.
This reverts commit e665b3df2a47ba5bb049d13358937ac67b860b70.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoiperf3: add SSL variant for iperf_auth feature
Philip Prindeville [Tue, 1 Aug 2017 20:04:55 +0000 (14:04 -0600)]
iperf3: add SSL variant for iperf_auth feature

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoiperf3: update to 3.2
Philip Prindeville [Mon, 31 Jul 2017 00:59:50 +0000 (18:59 -0600)]
iperf3: update to 3.2

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoiputils: update sha256sum
John Crispin [Wed, 23 Aug 2017 17:34:24 +0000 (19:34 +0200)]
iputils: update sha256sum

Signed-off-by: John Crispin <john@phrozen.org>
7 years agotools: patch various gnu tools for macOS 10.13
Ryan Mounce [Thu, 3 Aug 2017 11:07:58 +0000 (20:37 +0930)]
tools: patch various gnu tools for macOS 10.13

These host tools compile but may crash at runtime when building on
macOS 10.13 (High Sierra). Backport upstream gnulib patch until new
releases of affected tools.

https://lists.gnu.org/archive/html/bug-gnulib/2017-07/msg00056.html
https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=c41f233c4c38e84023a16339782ee306f03e7f59

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
7 years agorules.mk: add missing CPP definition
BangLang Huang [Mon, 14 Aug 2017 04:49:10 +0000 (12:49 +0800)]
rules.mk: add missing CPP definition

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agoutil-linux: don't need to build NLS support
Philip Prindeville [Mon, 21 Aug 2017 20:09:57 +0000 (14:09 -0600)]
util-linux: don't need to build NLS support

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029
Andreas Ziegler [Sun, 6 Aug 2017 19:57:46 +0000 (21:57 +0200)]
ath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
7 years agoiputils: switch to new upstream
John Crispin [Wed, 23 Aug 2017 14:31:35 +0000 (16:31 +0200)]
iputils: switch to new upstream

Signed-off-by: John Crispin <john@phrozen.org>
7 years agotools/mkimage: fix musl build
Marty Plummer [Fri, 11 Aug 2017 07:11:39 +0000 (02:11 -0500)]
tools/mkimage: fix musl build

Taken from: http://git.denx.de/?p=u-boot.git;a=commit;h=26e355d131a6b56ea78a156c1cee4f6ba0500b37

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
7 years agoramips: set ethernet mac address for VoCore2
L. D. Pinney [Sat, 12 Aug 2017 14:04:27 +0000 (22:04 +0800)]
ramips: set ethernet mac address for VoCore2

This patch sets the mac address for the VoCore2 devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
7 years agosamba36-net: new package
Ansuel Smith [Sun, 13 Aug 2017 18:36:56 +0000 (20:36 +0200)]
samba36-net: new package

Samba could also be usefull for sending commands to windows pc (like shoutdown command). This new package add the bin to include this kind of command to the samba package.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
7 years agoramips: add Xiaomi Mi Router 3G support
Pavel Kubelun [Sat, 12 Aug 2017 14:56:11 +0000 (17:56 +0300)]
ramips: add Xiaomi Mi Router 3G support

This commit adds support for Xiaomi Mi WiFi Router 3G.

Short specification:
 - MT7621AT + MT7603EN + 7612EN
 - 256MB DDR3 RAM
 - 128MB NAND flash
 - 1+2 x 1000M Ethernet
 - 1x USB 3.0 port
 - reset button
 - yellow, blue, red leds

Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: mtd erase kernel0
- run: reboot

Originally stock firmware has following partitions:
 - ...
 - kernel0 (primary kernel image)
 - kernel1 (secondary kernel image, used by u-boot in failsafe routine)
 - rootfs0 (primary rootfs)
 - rootfs1 (secondary rootfs in case primary fails)
 - overlay (used as ubi overlay)

This commit squashes rootfs0, rootfs1 and overlay partitions into 1, so
it can be used by LEDE fully for package installation, resulting in 117,5MiB.

This device lacks hw watchdog, so adding softdog instead (stock does the same).

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
7 years agoutil-linux: add missing dependencies
Jo-Philipp Wich [Wed, 23 Aug 2017 09:31:09 +0000 (11:31 +0200)]
util-linux: add missing dependencies

Commit e505f59bd9 "utils/util-linux: Update to 2.30.1" bumped util-linux
without properly adjusting the dependencies of all applets.

Add missing ncursesw dependencies to sfdisk and dmesg applets to fix
packaging issues.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoiwinfo: update to the latest git HEAD
Rafał Miłecki [Wed, 23 Aug 2017 09:18:04 +0000 (11:18 +0200)]
iwinfo: update to the latest git HEAD

c1a03e8 nl80211: request split information about frequencies
5638567 nl80211: store info about freq being not available for some bandwidths
ce51cb8 Allow storing more info about each frequency
5c10efa nl80211: support receiving split frequencies
335967c nl80211: improve error handling
ab089dd nl80211: propagate netlink errors to callers
7bba117 nl80211: handle netlink errors in nl80211_wait()
d22c64c iwinfo: add device id for Ubiquiti NanoStation Loco M2

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoRevert "busybox: ash/hush fix for read-builtin command"
Jo-Philipp Wich [Wed, 23 Aug 2017 08:56:53 +0000 (10:56 +0200)]
Revert "busybox: ash/hush fix for read-builtin command"

Revert this commit as it introduces a patchfile at a wrong location.
Since the patch was never effective, we can assume that this particular
commit was not properly tested.

This reverts commit dde9da46c1586c0bda54e7fa6de05f0fc76e557a.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoRevert "xtables-addons: fix nathelper-rtsp dependencies"
John Crispin [Wed, 23 Aug 2017 07:54:47 +0000 (09:54 +0200)]
Revert "xtables-addons: fix nathelper-rtsp dependencies"

This reverts commit e2ef80130e0c855df47b2e046aed2b3467845184.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agomediatek: drop kernel dep on userland module
John Crispin [Wed, 23 Aug 2017 07:54:26 +0000 (09:54 +0200)]
mediatek: drop kernel dep on userland module

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoxtables-addons: fix nathelper-rtsp dependencies
Philip Prindeville [Tue, 22 Aug 2017 16:13:00 +0000 (10:13 -0600)]
xtables-addons: fix nathelper-rtsp dependencies

Both nf_conntrack and nf_nat need to be called out.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoprocd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 14:47:18 +0000 (16:47 +0200)]
procd: update to latest git HEAD

54b46a3 procd: send ubus notify when a config file has changed

Signed-off-by: John Crispin <john@phrozen.org>
7 years agodnsmasq: add ubus notifications for new leases
John Crispin [Tue, 22 Aug 2017 14:43:02 +0000 (16:43 +0200)]
dnsmasq: add ubus notifications for new leases

Signed-off-by: John Crispin <john@phrozen.org>
7 years agohostapd: add additional ubus notifications
John Crispin [Tue, 22 Aug 2017 14:33:40 +0000 (16:33 +0200)]
hostapd: add additional ubus notifications

Signed-off-by: John Crispin <john@phrozen.org>
7 years agonvram: add help message for nvram magic not found
BangLang Huang [Fri, 24 Feb 2017 02:58:09 +0000 (10:58 +0800)]
nvram: add help message for nvram magic not found

The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: improve argument check when program start
BangLang Huang [Fri, 24 Feb 2017 02:52:52 +0000 (10:52 +0800)]
nvram: improve argument check when program start

print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: add usage() function
BangLang Huang [Fri, 24 Feb 2017 02:45:16 +0000 (10:45 +0800)]
nvram: add usage() function

Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: fix memory leak
BangLang Huang [Fri, 24 Feb 2017 02:16:17 +0000 (10:16 +0800)]
nvram: fix memory leak

Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonetifd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 07:12:56 +0000 (09:12 +0200)]
netifd: update to latest git HEAD

b5731bf allow setting rps/xps defualt values via uci
2a29d1a system: remove unused 6rd tunnel attributes
e627542 netifd: allow negative neighlocktime values
e41382c system-linux: parse ipv6 specific tunnel settings as nested data json object

Signed-off-by: John Crispin <john@phrozen.org>
7 years agogpio-button-hotplug: leave platform_device.dev.platform_data untouched
Furong Xu [Thu, 2 Mar 2017 09:00:32 +0000 (17:00 +0800)]
gpio-button-hotplug: leave platform_device.dev.platform_data untouched

get platform_data from gpio_keys_button_dev.pdata, and fix a illegal pointer
dereference like this:

[   51.143776] gpio-keys-polled gpio-keys-polled: missing poll_interval value
[   51.150852] gpio-keys-polled: probe of gpio-keys-polled failed with error -22
[  828.159993] gpio-keys-polled gpio-keys-polled: no memory for button data
[  828.166821] gpio-keys-polled: probe of gpio-keys-polled failed with error -12

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoutils/util-linux: Update to 2.30.1
Daniel Engberg [Tue, 11 Jul 2017 09:07:51 +0000 (11:07 +0200)]
utils/util-linux: Update to 2.30.1

Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agouboot-lantiq: Enable TFTP PUT support for backups
Carl-Daniel Hailfinger [Sat, 12 Aug 2017 17:04:52 +0000 (19:04 +0200)]
uboot-lantiq: Enable TFTP PUT support for backups

Backing up the current firmware from U-Boot over serial can take hours.
Booting a working Linux image for backup purposes is not always an option.
Using the tftpput command in U-Boot is the fastest and easiest way.

tftpput will upload the contents of a memory region to the TFTP server.
The IP address of the server is stored in the serverip variable.

Usage:
tftpput <memaddr> <length> <filename>

Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22):
VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
7 years agoimx6: add driver for temp/voltage monitoring
Koen Vandeputte [Thu, 17 Aug 2017 12:22:06 +0000 (14:22 +0200)]
imx6: add driver for temp/voltage monitoring

The Gateworks System Controller (GSC) mimics a standard AD7418 device on
I2C bus 0 at slave 0x29.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoimx6: refresh kernel config
Koen Vandeputte [Thu, 17 Aug 2017 12:22:05 +0000 (14:22 +0200)]
imx6: refresh kernel config

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoca-certificates: Update to 20170717
Christian Schoenebeck [Tue, 15 Aug 2017 18:44:17 +0000 (20:44 +0200)]
ca-certificates: Update to 20170717

Update to 20170717

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
7 years agoprocd: fix hotplug.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:25 +0000 (15:06 +0200)]
procd: fix hotplug.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agoprocd: fix hotplug-preinit.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:04 +0000 (15:06 +0200)]
procd: fix hotplug-preinit.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agomediatek: update to latest kernel patchset from v4.13-rc
John Crispin [Fri, 18 Aug 2017 16:11:52 +0000 (18:11 +0200)]
mediatek: update to latest kernel patchset from v4.13-rc

Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: update 4.4 to 4.4.83
Kevin Darbyshire-Bryant [Thu, 17 Aug 2017 12:21:21 +0000 (13:21 +0100)]
kernel: update 4.4 to 4.4.83

Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[cleanup commit message, add compile/runtime tested]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agokernel: update 4.9 to 4.9.44
Stijn Tintel [Thu, 17 Aug 2017 08:51:05 +0000 (10:51 +0200)]
kernel: update 4.9 to 4.9.44

Refresh patches.
Adapt 704-phy-no-genphy-soft-reset.patch.
Remove brcm2708/950-0005-mm-Remove-the-PFN-busy-warning.patch.
Compile-tested on brcm2708/bcm2708 and x86/64.
Runtime-tested on brcm2708/bcm2708 and x86/64.

Fixes the following vulnerabilities:
- CVE-2017-7533
- CVE-2017-1000111
- CVE-2017-1000112

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobcm53xx: backport DTS commits that setup USB LEDs
Rafał Miłecki [Thu, 17 Aug 2017 07:43:37 +0000 (09:43 +0200)]
bcm53xx: backport DTS commits that setup USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoodhcpd: update to latest git HEAD
Hans Dedecker [Wed, 16 Aug 2017 19:19:47 +0000 (21:19 +0200)]
odhcpd: update to latest git HEAD

94e65ee ndp: use IPv4 address list when comparing IPv4 addresses
ff5020d dhcpv6-ia: rework reconfigure accept logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: add support for the VoCore2 Lite
L. D. Pinney [Thu, 3 Aug 2017 20:09:06 +0000 (04:09 +0800)]
ramips: add support for the VoCore2 Lite

The VoCore2 Lite uses the same PCB as the Vocore2.
This patch moves the common VoCore2 parts into dtsi.

Removed memory node in the device tree source file.
Memory is detected automatically.

http://vocore.io/
http://vonger.net/
http://vonger.cn/

Specifications:
- SoC: MediaTek MT7688AN
- RAM: 64MB DDR2 EtronTech EM68B16CWQH-25H
- Flash: 8MB NOR SPI Flash GigaDevice GD25Q64CWIG
- Wireless: Built into MT7688AN with onboard IPEX connector

Firmware installation:
- VoCore2-Lite ships with firmware forked from OpenWrt.
- Installation from the bootloader is recommended.
- If using luci/sysupgrade use the -n option (do not keep settings)
  original firmware uses a modified proprietary MediaTek wireless driver.
- The wireless is disabled by default in LEDE.
- If reverting to factory firmware using the bootloader is recommended.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Tested by: Noble Pepper <noblepepper@gmail.com>

7 years agoramips: fix WHR-1166D WAN port
Mathias Kresin [Wed, 9 Aug 2017 18:17:43 +0000 (20:17 +0200)]
ramips: fix WHR-1166D WAN port

By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agowpa_supplicant: log to syslog instead of stdout
Stijn Tintel [Tue, 8 Aug 2017 05:56:06 +0000 (07:56 +0200)]
wpa_supplicant: log to syslog instead of stdout

While debugging an issue with a client device, wpa_supplicant did not
seem to log anything at all. Make wpa_supplicant log to syslog instead
of stdout, to make debugging easier and to be consistent with hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobrcm2708-gpu-fw: update to latest version
Stijn Tintel [Tue, 8 Aug 2017 05:07:12 +0000 (07:07 +0200)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobase-files: drop unused preinit_echo function
Rafał Miłecki [Mon, 7 Aug 2017 06:41:26 +0000 (08:41 +0200)]
base-files: drop unused preinit_echo function

It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agonftables: remove date from version
Hauke Mehrtens [Wed, 9 Aug 2017 21:08:48 +0000 (23:08 +0200)]
nftables: remove date from version

We are using the normal 0.7 version of nftables, do not add an
additional date to the version number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agotools/pkg-config: Update to 0.29.2
Daniel Engberg [Tue, 8 Aug 2017 06:14:28 +0000 (08:14 +0200)]
tools/pkg-config: Update to 0.29.2

* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/expat: Update to 2.2.3
Daniel Engberg [Mon, 7 Aug 2017 03:00:46 +0000 (05:00 +0200)]
tools/expat: Update to 2.2.3

Update (lib)expat to 2.2.3
Remove poor entropy hack, 2.2.3 uses /dev/urandom in worst case

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agoutils/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:44:27 +0000 (04:44 +0200)]
utils/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:42:21 +0000 (04:42 +0200)]
tools/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agolantiq: fix missing otg_cap on danube platform
Daniel Gonzalez Cabanelas [Sat, 29 Jul 2017 12:54:15 +0000 (14:54 +0200)]
lantiq: fix missing otg_cap on danube platform

USB doesn't work in some danube boards because otg_cap
is missing since previous changes made on the USB-dwc2
lantiq driver. Fix it.

Tested on the ARV7518PW router.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
7 years agobase-files: don't setup network in preinit if failsafe is disabled
Rafał Miłecki [Mon, 7 Aug 2017 09:09:33 +0000 (11:09 +0200)]
base-files: don't setup network in preinit if failsafe is disabled

With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoprocd: update to the latest git HEAD
Hans Dedecker [Tue, 8 Aug 2017 12:50:36 +0000 (14:50 +0200)]
procd: update to the latest git HEAD

a17e1e8 watchdog: fix inline watchdog_get_magicclose function prototype

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: ArcherC50v1: fix wlan2g MAC address
Thibaut VARENE [Fri, 4 Aug 2017 15:22:03 +0000 (17:22 +0200)]
ramips: ArcherC50v1: fix wlan2g MAC address

By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agolantiq: board.d: use auto xfer_mode as default
Martin Schiller [Thu, 3 Aug 2017 06:37:53 +0000 (08:37 +0200)]
lantiq: board.d: use auto xfer_mode as default

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: add support for auto xfer_mode and auto line_mode
Martin Schiller [Thu, 3 Aug 2017 07:55:00 +0000 (09:55 +0200)]
ltq-vdsl-app: add support for auto xfer_mode and auto line_mode

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

xfer_mode and line_mode can be set to fixed value independantly from
each other.

The syntax for the tc_layer argument of vdsl_cpe_control is as follow:

-T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL>

where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer

and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be:
1=64/65-octet encapsulation supported
2=64/65-octet encapsulation with pre-emption
3=64/65-octet encapsulation with short packets

Default: In case of no '-T' option is given, ADSL will be configured
in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1

The '-M' argument of dsl_cpe_control defines the initial DSL mode
(NextMode) for ADSL/VDSL multimode handling.

Possible Values: 0=API-default, 1=ADSL, 2=VDSL

Default: In case of no '-M' option is given, '0' (API-default) will
be selected.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: mask out ADSL bits when VDSL is requested
Martin Schiller [Thu, 3 Aug 2017 07:50:03 +0000 (09:50 +0200)]
ltq-vdsl-app: mask out ADSL bits when VDSL is requested

If the line_mode is fixed configured to vdsl, than only G.993 VDSL
should be used.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: use notification based ATM/PTM driver load
Martin Schiller [Thu, 3 Aug 2017 07:44:21 +0000 (09:44 +0200)]
ltq-vdsl-app: use notification based ATM/PTM driver load

This patch removes the fixed atm/ptm driver loading and
switches to notification based driver loading.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agolantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load
Martin Schiller [Thu, 29 Jun 2017 04:54:00 +0000 (06:54 +0200)]
lantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load

This is needed to be able to load the ltq-atm/ltq-ptm driver
from a notify script during synchronization, because the line can
reach showtime state before the driver is fully loaded.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agolantiq: split up dsl_notify.sh into separate notification handlers
Martin Schiller [Thu, 29 Jun 2017 04:49:49 +0000 (06:49 +0200)]
lantiq: split up dsl_notify.sh into separate notification handlers

This makes it possible to simply add additional notification handlers
by putting new scripts in the /etc/hotplug.d/dsl directory.

the following Environment Variables are used:

(values marked with an * are only available when bonding support is
compiled in)

DSL_NOTIFICATION_TYPE with one of these values:
- DSL_STATUS
- DSL_INTERFACE_STATUS
- DSL_DATARATE_STATUS_US
- DSL_DATARATE_STATUS_DS

DSL_LINE_NUMBER=<0|1> *

If DSL_NOTIFICATION_TYPE == DSL_STATUS, these variables are set:

- DSL_XTU_STATUS=<ADSL|VDSL>
- DSL_TC_LAYER_STATUS=<ATM|EFM>
- DSL_EFM_TC_CONFIG_US=<NORMAL|PRE_EMPTION>
- DSL_EFM_TC_CONFIG_DS=<NORMAL>

If DSL_NOTIFICATION_TYPE == DSL_INTERFACE_STATUS, these variables are
set:

- DSL_INTERFACE_STATUS=<DOWN|READY|HANDSHAKE|TRAINING|UP>
- DSL_BONDING_STATUS=<INACTIVE|ACTIVE> *

If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_US, these variables are
set:

- DSL_DATARATE_US_BC0=<Upstream data rate in bit/s for Channel 0>
- DSL_DATARATE_US_BC1=<Upstream data rate in bit/s for Channel 1> *

If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_DS, these variables are
set:

- DSL_DATARATE_DS_BC0=<Downstream data rate in bit/s for Channel 0>
- DSL_DATARATE_DS_BC1=<Downstream data rate in bit/s for Channel 1> *

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-xdsl-app: drop esi call
Mathias Kresin [Thu, 3 Aug 2017 19:11:57 +0000 (21:11 +0200)]
ltq-xdsl-app: drop esi call

The esi call was added to workaround a race condition between applying
a configured mac address to the wan interface and starting the protocol
(handler) as it was observed in a DHCP over ATM bridge configuration.

Martin Schiller, TDT GmbH was so kind to test with their local
infrastructure if the race condition still exists. The provided package
dumps captured behind the DSLAM shows that it doesn't. It was most
likely fixed with adding carrier support to the lantiq ptm/atm driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agokernel: add missing patch
John Crispin [Sat, 5 Aug 2017 07:47:41 +0000 (09:47 +0200)]
kernel: add missing patch

This patch was accidentally dropped.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: split patches folder up into backport, pending and hack folders
John Crispin [Sun, 25 Dec 2016 19:11:34 +0000 (20:11 +0100)]
kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoramips: fix cd-poll sd card remove randomly
Qin Wie [Tue, 1 Aug 2017 06:26:49 +0000 (14:26 +0800)]
ramips: fix cd-poll sd card remove randomly

Fix when add 'mediatek,cd-poll' to dts cause the sd card be removed randomly.
Special for the device without card-detect pin.

Signed-off-by: Qin Wie <me@vonger.cn>
7 years agobase-files: suppress uci not found output in login.sh
Florian Eckert [Tue, 1 Aug 2017 12:35:18 +0000 (14:35 +0200)]
base-files: suppress uci not found output in login.sh

Fix "uci: Entry not found" output if "ttylogin" is not set in
"etc/config/system"

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agoodhcpd: update to latest git HEAD (FS#402, FS#524)
Hans Dedecker [Thu, 3 Aug 2017 19:20:47 +0000 (21:20 +0200)]
odhcpd: update to latest git HEAD (FS#402, FS#524)

296b4a0 dhcpv6: assign all viable DHCPv6 addresses by default (FS#402, FS#524)
f4d38e0 treewide: reflect managed mode is related to RA

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: move common parts into dtsi
Mathias Kresin [Sun, 30 Jul 2017 11:50:36 +0000 (13:50 +0200)]
ramips: move common parts into dtsi

Move the common parts of boards with multiple flash size variants into
dtsi files.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: update device tree source files
L. D. Pinney [Sat, 29 Jul 2017 02:14:07 +0000 (10:14 +0800)]
ramips: update device tree source files

Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agotools/firmware-utils: document reserved fields in mkchkimg
Thibaut VARENE [Sun, 30 Jul 2017 10:40:25 +0000 (12:40 +0200)]
tools/firmware-utils: document reserved fields in mkchkimg

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: Add support for Netgear EX3800
Thibaut VARENE [Sun, 30 Jul 2017 10:17:44 +0000 (12:17 +0200)]
ramips: Add support for Netgear EX3800

The Netgear EX3800 is essentially an EX3700 with a mains output socket.

Both devices use the exact same firmware image (original firmware is named
EX3700-EX3800-version.chk).

This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and
updating the necessary glue.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: EX3700: rename factory.bin to factory.chk
Thibaut VARENE [Sun, 30 Jul 2017 10:02:55 +0000 (12:02 +0200)]
ramips: EX3700: rename factory.bin to factory.chk

The stock firmware upgrade interface requires the file to end with a .chk
extension.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: cleanup EX2700 and WN3000RPv3 LEDs
Thibaut VARENE [Sun, 30 Jul 2017 13:42:38 +0000 (15:42 +0200)]
ramips: cleanup EX2700 and WN3000RPv3 LEDs

This patch cleans up the WN3000RPv3 and EX2700 setup, bringing it in line
with other similar devices:

The power led is a bicolor one. The bootloader brings the red side on at
powerup.

Instead of blinking the red side in diag.sh and need to forcefully turn it off
in 01_leds, this patch simplifies the setup by relying on the default off state
of the gpio-led driver for the red side and blinking the green side as with
other devices.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: cleanup AsiaRF AWM002 eval board support
Mathias Kresin [Sun, 30 Jul 2017 09:08:03 +0000 (11:08 +0200)]
ramips: cleanup AsiaRF AWM002 eval board support

Cleanup the dtsi files and remove one layer of dtsi. Set the size of
the firmware partition to a value matching the flash size from the
board (variant) name.

Remove the usb led trigger. There is neither a default config for the
usb led trigger nor a LED for usb activity indication.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: drop AsiaRF AWM003 eval board
Mathias Kresin [Sun, 30 Jul 2017 09:16:09 +0000 (11:16 +0200)]
ramips: drop AsiaRF AWM003 eval board

Everything is identical to the AWM002 8m eval board. No need to
duplicate it once more.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoramips: fix Omnima MiniEMBWiFi image
Mathias Kresin [Mon, 31 Jul 2017 18:21:12 +0000 (20:21 +0200)]
ramips: fix Omnima MiniEMBWiFi image

Reference the Omnima MiniEMBWiFi device tree source file in the image
build code. Otherwise the dts of the image processed before is used.

Signed-off-by: Mathias Kresin <dev@kresin.me>