From 0dc62d5278b9e2e4de3d076c3a403dd6cbab5c67 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Fri, 11 Dec 2015 13:38:21 +0000 Subject: [PATCH] mvebu: drop support for old kernels Signed-off-by: Imre Kaloz SVN-Revision: 47835 --- target/linux/mvebu/config-3.18 | 355 ------------ target/linux/mvebu/config-4.0 | 362 ------------ .../patches-3.18/001-add_mamba_support.patch | 388 ------------- .../002-add_mamba_powertables.patch | 103 ---- .../patches-3.18/003-add_mamba_switch.patch | 19 - .../patches-3.18/004-mamba_disable_rtc.patch | 14 - .../007-fix_the_aurora_l2_cache_node.patch | 40 -- ...8-armada-xp_consolidate_pinctrl_node.patch | 81 --- ...lias_to_pinctrl_and_add_base_address.patch | 103 ---- .../011-use_pinctrl_node_alias.patch | 258 --------- ...2-move_ge_pinctrl_settings_for_rgmii.patch | 81 --- ...13-add_ge0_pinctrl_settings_for_gmii.patch | 31 - .../patches-3.18/014-add_uartx_labels.patch | 58 -- ...rmada_370_xp_pinctrl_node_definition.patch | 538 ------------------ ...016-common_armada_xp_uart2_3_pinctrl.patch | 52 -- ...common_armada_xp_spi_pinctrl_setting.patch | 69 --- ...lize_pinctrl_entries_for_armada_socs.patch | 98 ---- ...bu-Add-a-number-of-pinctrl-functions.patch | 65 --- ...mada-385-Access-Point-Development-Bo.patch | 212 ------- ...u-A385-AP-Enable-the-NAND-controller.patch | 34 -- ...-mvebu-a38x-Add-UART1-muxing-options.patch | 37 -- .../024-ARM-mvebu-a38x-Fix-node-names.patch | 85 --- ...5-ARM-mvebu-Use-arm_coherent_dma_ops.patch | 111 ---- .../050-leds_tlc59116_document_binding.patch | 51 -- .../051-leds_tlc59116_add_driver.patch | 297 ---------- ...date-cpuidle-thresholds-for-Armada-X.patch | 66 --- .../099-build_linksys_a385_dts.patch | 12 - .../patches-3.18/100-find_active_root.patch | 61 -- .../patches-3.18/102-revert_i2c_delay.patch | 15 - .../patches-3.18/140-alias_mdio_node.patch | 11 - ...platform_data_for_independent_clocks.patch | 44 -- .../patches-3.18/198-gpio_mvebu_suspend.patch | 137 ----- .../199-gpio_mvebu_drop_owner.patch | 15 - .../200-gpio_mvebu_checkpatch_fixes.patch | 223 -------- ...pio_mvebu_fix_probe_cleanup_on_error.patch | 63 -- ...2-gpio_mvebu_add_limited_pwm_support.patch | 433 -------------- ...nd_mvebu_gpio_documentation_with_pwm.patch | 52 -- ..._xp_add_pwm_properties_to_dtsi_files.patch | 149 ----- ...05-arm_mvebu_enable_pwm_in_defconfig.patch | 18 - ...0ac_use_pwm-fan_rather_than_gpio-fan.patch | 28 - .../207-armada-385-rd-mtd-partitions.patch | 19 - .../208-ARM-mvebu-385-ap-Add-partitions.patch | 34 -- .../patches-3.18/300-add_missing_labels.patch | 29 - .../patches-3.18/600-armada_38x_rtc.patch | 403 ------------- .../700-usb_xhci_plat_phy_support.patch | 47 -- .../patches-4.0/001-add_mamba_support.patch | 388 ------------- .../002-add_mamba_powertables.patch | 103 ---- .../patches-4.0/003-add_mamba_switch.patch | 19 - .../005-build_linksys_a385_dts.patch | 11 - ...u-A385-AP-Enable-the-NAND-controller.patch | 34 -- .../050-leds_tlc59116_document_binding.patch | 51 -- .../051-leds_tlc59116_add_driver.patch | 297 ---------- .../patches-4.0/100-find_active_root.patch | 61 -- .../patches-4.0/102-revert_i2c_delay.patch | 15 - ...2-gpio_mvebu_add_limited_pwm_support.patch | 433 -------------- ...nd_mvebu_gpio_documentation_with_pwm.patch | 52 -- ..._xp_add_pwm_properties_to_dtsi_files.patch | 149 ----- ...05-arm_mvebu_enable_pwm_in_defconfig.patch | 18 - ...0ac_use_pwm-fan_rather_than_gpio-fan.patch | 28 - .../207-armada-385-rd-mtd-partitions.patch | 19 - .../208-ARM-mvebu-385-ap-Add-partitions.patch | 34 -- .../patches-4.0/300-add_missing_labels.patch | 11 - .../700-usb_xhci_plat_phy_support.patch | 47 -- 63 files changed, 7171 deletions(-) delete mode 100644 target/linux/mvebu/config-3.18 delete mode 100644 target/linux/mvebu/config-4.0 delete mode 100644 target/linux/mvebu/patches-3.18/001-add_mamba_support.patch delete mode 100644 target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch delete mode 100644 target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch delete mode 100644 target/linux/mvebu/patches-3.18/004-mamba_disable_rtc.patch delete mode 100644 target/linux/mvebu/patches-3.18/007-fix_the_aurora_l2_cache_node.patch delete mode 100644 target/linux/mvebu/patches-3.18/008-armada-xp_consolidate_pinctrl_node.patch delete mode 100644 target/linux/mvebu/patches-3.18/010-add_node_alias_to_pinctrl_and_add_base_address.patch delete mode 100644 target/linux/mvebu/patches-3.18/011-use_pinctrl_node_alias.patch delete mode 100644 target/linux/mvebu/patches-3.18/012-move_ge_pinctrl_settings_for_rgmii.patch delete mode 100644 target/linux/mvebu/patches-3.18/013-add_ge0_pinctrl_settings_for_gmii.patch delete mode 100644 target/linux/mvebu/patches-3.18/014-add_uartx_labels.patch delete mode 100644 target/linux/mvebu/patches-3.18/015-move_armada_370_xp_pinctrl_node_definition.patch delete mode 100644 target/linux/mvebu/patches-3.18/016-common_armada_xp_uart2_3_pinctrl.patch delete mode 100644 target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch delete mode 100644 target/linux/mvebu/patches-3.18/018-normalize_pinctrl_entries_for_armada_socs.patch delete mode 100644 target/linux/mvebu/patches-3.18/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch delete mode 100644 target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch delete mode 100644 target/linux/mvebu/patches-3.18/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch delete mode 100644 target/linux/mvebu/patches-3.18/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch delete mode 100644 target/linux/mvebu/patches-3.18/024-ARM-mvebu-a38x-Fix-node-names.patch delete mode 100644 target/linux/mvebu/patches-3.18/025-ARM-mvebu-Use-arm_coherent_dma_ops.patch delete mode 100644 target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch delete mode 100644 target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch delete mode 100644 target/linux/mvebu/patches-3.18/061-cpuidle-mvebu-Update-cpuidle-thresholds-for-Armada-X.patch delete mode 100644 target/linux/mvebu/patches-3.18/099-build_linksys_a385_dts.patch delete mode 100644 target/linux/mvebu/patches-3.18/100-find_active_root.patch delete mode 100644 target/linux/mvebu/patches-3.18/102-revert_i2c_delay.patch delete mode 100644 target/linux/mvebu/patches-3.18/140-alias_mdio_node.patch delete mode 100644 target/linux/mvebu/patches-3.18/150-use_the_cpufreq-dt_platform_data_for_independent_clocks.patch delete mode 100644 target/linux/mvebu/patches-3.18/198-gpio_mvebu_suspend.patch delete mode 100644 target/linux/mvebu/patches-3.18/199-gpio_mvebu_drop_owner.patch delete mode 100644 target/linux/mvebu/patches-3.18/200-gpio_mvebu_checkpatch_fixes.patch delete mode 100644 target/linux/mvebu/patches-3.18/201-gpio_mvebu_fix_probe_cleanup_on_error.patch delete mode 100644 target/linux/mvebu/patches-3.18/202-gpio_mvebu_add_limited_pwm_support.patch delete mode 100644 target/linux/mvebu/patches-3.18/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch delete mode 100644 target/linux/mvebu/patches-3.18/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch delete mode 100644 target/linux/mvebu/patches-3.18/205-arm_mvebu_enable_pwm_in_defconfig.patch delete mode 100644 target/linux/mvebu/patches-3.18/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch delete mode 100644 target/linux/mvebu/patches-3.18/207-armada-385-rd-mtd-partitions.patch delete mode 100644 target/linux/mvebu/patches-3.18/208-ARM-mvebu-385-ap-Add-partitions.patch delete mode 100644 target/linux/mvebu/patches-3.18/300-add_missing_labels.patch delete mode 100644 target/linux/mvebu/patches-3.18/600-armada_38x_rtc.patch delete mode 100644 target/linux/mvebu/patches-3.18/700-usb_xhci_plat_phy_support.patch delete mode 100644 target/linux/mvebu/patches-4.0/001-add_mamba_support.patch delete mode 100644 target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch delete mode 100644 target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch delete mode 100644 target/linux/mvebu/patches-4.0/005-build_linksys_a385_dts.patch delete mode 100644 target/linux/mvebu/patches-4.0/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch delete mode 100644 target/linux/mvebu/patches-4.0/050-leds_tlc59116_document_binding.patch delete mode 100644 target/linux/mvebu/patches-4.0/051-leds_tlc59116_add_driver.patch delete mode 100644 target/linux/mvebu/patches-4.0/100-find_active_root.patch delete mode 100644 target/linux/mvebu/patches-4.0/102-revert_i2c_delay.patch delete mode 100644 target/linux/mvebu/patches-4.0/202-gpio_mvebu_add_limited_pwm_support.patch delete mode 100644 target/linux/mvebu/patches-4.0/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch delete mode 100644 target/linux/mvebu/patches-4.0/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch delete mode 100644 target/linux/mvebu/patches-4.0/205-arm_mvebu_enable_pwm_in_defconfig.patch delete mode 100644 target/linux/mvebu/patches-4.0/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch delete mode 100644 target/linux/mvebu/patches-4.0/207-armada-385-rd-mtd-partitions.patch delete mode 100644 target/linux/mvebu/patches-4.0/208-ARM-mvebu-385-ap-Add-partitions.patch delete mode 100644 target/linux/mvebu/patches-4.0/300-add_missing_labels.patch delete mode 100644 target/linux/mvebu/patches-4.0/700-usb_xhci_plat_phy_support.patch diff --git a/target/linux/mvebu/config-3.18 b/target/linux/mvebu/config-3.18 deleted file mode 100644 index a5eac432de..0000000000 --- a/target/linux/mvebu/config-3.18 +++ /dev/null @@ -1,355 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_FEROCEON_L2 is not set -CONFIG_CACHE_L2X0=y -CONFIG_CACHE_PL310=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -# CONFIG_CPU_THERMAL is not set -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_XZ=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART=y -# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xd0012000 -# CONFIG_DEBUG_UART_PL01X is not set -CONFIG_DEBUG_UART_VIRT=0xfec12000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -# CONFIG_DW_DMAC_CORE is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MVEBU_PWM=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_IWMMXT is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LIBFDT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_ARMADA_370=y -# CONFIG_MACH_ARMADA_375 is not set -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UIMAGE_SPLIT=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MVSW61XX_PHY=y -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PJ4B_ERRATA_4742=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PLAT_ORION=y -CONFIG_PM_OPP=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_PWM=y -# CONFIG_PWM_FSL_FTM is not set -CONFIG_PWM_SYSFS=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_PWM is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_ARMADA38X is not set -# CONFIG_RTC_DRV_MV is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_DW=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_STOP_MACHINE=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_STATS=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_XZ=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_PHY=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/config-4.0 b/target/linux/mvebu/config-4.0 deleted file mode 100644 index a682f1f8d6..0000000000 --- a/target/linux/mvebu/config-4.0 +++ /dev/null @@ -1,362 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_FEROCEON_L2 is not set -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -# CONFIG_CPU_THERMAL is not set -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_XZ=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0=y -# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xd0012000 -CONFIG_DEBUG_UART_VIRT=0xfec12000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -# CONFIG_DW_DMAC_CORE is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MVEBU_PWM=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_IWMMXT is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_LZ4_COMPRESS is not set -# CONFIG_LZ4_DECOMPRESS is not set -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_ARMADA_370=y -# CONFIG_MACH_ARMADA_375 is not set -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UIMAGE_SPLIT=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MVSW61XX_PHY=y -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -# CONFIG_PCI_DOMAINS_GENERIC is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PJ4B_ERRATA_4742=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PLAT_ORION=y -CONFIG_PM_OPP=y -CONFIG_PWM=y -# CONFIG_PWM_FSL_FTM is not set -CONFIG_PWM_SYSFS=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_PWM is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_MV is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_DW=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_SRCU=y -CONFIG_STOP_MACHINE=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_STATS=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_XZ=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_PHY=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch b/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch deleted file mode 100644 index 44a1adc415..0000000000 --- a/target/linux/mvebu/patches-3.18/001-add_mamba_support.patch +++ /dev/null @@ -1,388 +0,0 @@ -From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001 -From: Imre Kaloz -Date: Mon, 16 Feb 2015 13:31:04 +0100 -Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support - -The Linksys WRT1900AC (Mamba) is a router that has - -- 2 mini-PCIe slots with Marvell 88W8864 radios -- 1 USB 3.0 port -- 1 USB 2.0/eSATAp port -- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) -- 128MB NAND flash -- 256MB RAM - -gregory.clement@free-electrons.com: - add ARM to the title - - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - - fix the unbalanced comment for the syscfg partition - -Signed-off-by: Imre Kaloz -Acked-by: Gregory CLEMENT -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ - 2 files changed, 349 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-linksys-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -0,0 +1,348 @@ -+/* -+ * Device Tree file for the Linksys WRT1900AC (Mamba). -+ * -+ * Note: this board is shipped with a new generation boot loader that -+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk -+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be -+ * used. -+ * -+ * Copyright (C) 2014 Imre Kaloz -+ * -+ * Based on armada-xp-axpwifiap.dts: -+ * -+ * Copyright (C) 2013 Marvell -+ * -+ * Thomas Petazzoni -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include -+#include -+#include "armada-xp-mv78230.dtsi" -+ -+/ { -+ model = "Linksys WRT1900AC"; -+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", -+ "marvell,armadaxp", "marvell,armada-370-xp"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart0; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ -+ }; -+ -+ soc { -+ ranges = ; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* Etron EJ168 USB 3.0 controller */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* First mini-PCIe port */ -+ pcie@2,0 { -+ /* Port 0, Lane 1 */ -+ status = "okay"; -+ }; -+ -+ /* Second mini-PCIe port */ -+ pcie@3,0 { -+ /* Port 0, Lane 3 */ -+ status = "okay"; -+ }; -+ }; -+ -+ internal-regs { -+ -+ /* J10: VCC, NC, RX, NC, TX, GND */ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ sata@a0000 { -+ nr-ports = <1>; -+ status = "okay"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-0 = <&ge0_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ ethernet@74000 { -+ pinctrl-0 = <&ge1_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ /* USB part of the eSATA/USB 2.0 port */ -+ usb@50000 { -+ status = "okay"; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ clock-frequency = <100000>; -+ -+ tmp421@4c { -+ compatible = "ti,tmp421"; -+ reg = <0x4c>; -+ }; -+ -+ tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #gpio-cells = <2>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan_amber@0 { -+ label = "mamba:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ wan_white@1 { -+ label = "mamba:white:wan"; -+ reg = <0x1>; -+ }; -+ -+ wlan_2g@2 { -+ label = "mamba:white:wlan_2g"; -+ reg = <0x2>; -+ }; -+ -+ wlan_5g@3 { -+ label = "mamba:white:wlan_5g"; -+ reg = <0x3>; -+ }; -+ -+ esata@4 { -+ label = "mamba:white:esata"; -+ reg = <0x4>; -+ }; -+ -+ usb2@5 { -+ label = "mamba:white:usb2"; -+ reg = <0x5>; -+ }; -+ -+ usb3_1@6 { -+ label = "mamba:white:usb3_1"; -+ reg = <0x6>; -+ }; -+ -+ usb3_2@7 { -+ label = "mamba:white:usb3_2"; -+ reg = <0x7>; -+ }; -+ -+ wps_white@8 { -+ label = "mamba:white:wps"; -+ reg = <0x8>; -+ }; -+ -+ wps_amber@9 { -+ label = "mamba:amber:wps"; -+ reg = <0x9>; -+ }; -+ }; -+ }; -+ -+ nand@d0000 { -+ status = "okay"; -+ num-cs = <1>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0000000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "u_env"; -+ reg = <0x100000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@140000 { -+ label = "s_env"; -+ reg = <0x140000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@900000 { -+ label = "devinfo"; -+ reg = <0x900000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ /* kernel1 overlaps with rootfs1 by design */ -+ partition@a00000 { -+ label = "kernel1"; -+ reg = <0xa00000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@d00000 { -+ label = "rootfs1"; -+ reg = <0xd00000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* kernel2 overlaps with rootfs2 by design */ -+ partition@3200000 { -+ label = "kernel2"; -+ reg = <0x3200000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@3500000 { -+ label = "rootfs2"; -+ reg = <0x3500000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* -+ * 38MB, last MB is for the BBT, not writable -+ */ -+ partition@5a00000 { -+ label = "syscfg"; -+ reg = <0x5a00000 0x2600000>; -+ }; -+ -+ /* -+ * Unused area between "s_env" and "devinfo". -+ * Moved here because otherwise the renumbered -+ * partitions would break the bootloader -+ * supplied bootargs -+ */ -+ partition@180000 { -+ label = "unused_area"; -+ reg = <0x180000 0x780000>; /* 7.5MB */ -+ }; -+ }; -+ -+ spi0: spi@10600 { -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "everspin,mr25h256"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <40000000>; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&keys_pin>; -+ pinctrl-names = "default"; -+ -+ button@1 { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button@2 { -+ label = "Factory Reset Button"; -+ linux,code = ; -+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&power_led_pin>; -+ pinctrl-names = "default"; -+ -+ power { -+ label = "mamba:white:power"; -+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ }; -+ -+ gpio_fan { -+ /* SUNON HA4010V4-0000-C99 */ -+ compatible = "gpio-fan"; -+ gpios = <&gpio0 24 0>; -+ -+ gpio-fan,speed-map = <0 0 -+ 4500 1>; -+ }; -+}; -+ -+&pinctrl { -+ -+ keys_pin: keys-pin { -+ marvell,pins = "mpp32", "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp40"; -+ marvell,function = "gpio"; -+ }; -+ -+ gpio_fan_pin: gpio-fan-pin { -+ marvell,pins = "mpp24"; -+ marvell,function = "gpio"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch b/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch deleted file mode 100644 index 6b51e48a84..0000000000 --- a/target/linux/mvebu/patches-3.18/002-add_mamba_powertables.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -84,12 +84,100 @@ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; -+ -+ ETSI = -+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; -+ -+ ETSI = -+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch b/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch deleted file mode 100644 index e43d164aaf..0000000000 --- a/target/linux/mvebu/patches-3.18/003-add_mamba_switch.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -415,6 +415,16 @@ - gpio-fan,speed-map = <0 0 - 4500 1>; - }; -+ -+ mvsw61xx { -+ compatible = "marvell,88e6172"; -+ status = "okay"; -+ reg = <0x10>; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ cpu-port-1 = <6>; -+ }; - }; - - &pinctrl { diff --git a/target/linux/mvebu/patches-3.18/004-mamba_disable_rtc.patch b/target/linux/mvebu/patches-3.18/004-mamba_disable_rtc.patch deleted file mode 100644 index 925bab0386..0000000000 --- a/target/linux/mvebu/patches-3.18/004-mamba_disable_rtc.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -183,6 +183,11 @@ - - internal-regs { - -+ rtc@10300 { -+ /* No crystal connected to the internal RTC */ -+ status = "disabled"; -+ }; -+ - /* J10: VCC, NC, RX, NC, TX, GND */ - serial@12000 { - status = "okay"; diff --git a/target/linux/mvebu/patches-3.18/007-fix_the_aurora_l2_cache_node.patch b/target/linux/mvebu/patches-3.18/007-fix_the_aurora_l2_cache_node.patch deleted file mode 100644 index 20f0f7195d..0000000000 --- a/target/linux/mvebu/patches-3.18/007-fix_the_aurora_l2_cache_node.patch +++ /dev/null @@ -1,40 +0,0 @@ -From a9ce1afb35317d2a0646c7530f0ae9822c93cd69 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT -Date: Mon, 6 Oct 2014 11:37:56 +0200 -Subject: ARM: mvebu: Fix the Aurora L2 cache node with the required - cache-unified property - -The L2 cache controller on the Armada 370 and Armada XP SoCs is a -unified cache. Moreover, the Aurora cache controller is compatible -with the L2x0 cache controller: the "cache-unified" property is -required by its binding. - -This patch fixes the Aurora L2 cache node for the Armada 370 and -Armada XP SoCs by adding this property. - -Reported-by: Sebastian Hesselbarth -Signed-off-by: Gregory CLEMENT -Acked-by: Sebastian Hesselbarth -Link: https://lkml.kernel.org/r/1412588276-4514-1-git-send-email-gregory.clement@free-electrons.com -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -95,6 +95,7 @@ - compatible = "marvell,aurora-outer-cache"; - reg = <0x08000 0x1000>; - cache-id-part = <0x100>; -+ cache-unified; - wt-override; - }; - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -39,6 +39,7 @@ - compatible = "marvell,aurora-system-cache"; - reg = <0x08000 0x1000>; - cache-id-part = <0x100>; -+ cache-unified; - wt-override; - }; - diff --git a/target/linux/mvebu/patches-3.18/008-armada-xp_consolidate_pinctrl_node.patch b/target/linux/mvebu/patches-3.18/008-armada-xp_consolidate_pinctrl_node.patch deleted file mode 100644 index 2e1010c135..0000000000 --- a/target/linux/mvebu/patches-3.18/008-armada-xp_consolidate_pinctrl_node.patch +++ /dev/null @@ -1,81 +0,0 @@ -From b324fa60ac94b9c00c59f621743715c036d134fa Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 19 Sep 2014 21:07:09 +0200 -Subject: ARM: mvebu: armada-xp: Consolidate pinctrl node - -All current Armada XP SoCs have their pin controller at 0x18000/0x38. -Move the common properties of pinctrl nodes to armada-xp.dtsi to allow -to share pinctrl settings later. - -Signed-off-by: Sebastian Hesselbarth -Acked-by: Thomas Petazzoni -Tested-By: Benoit Masson -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -169,13 +169,6 @@ - internal-regs { - pinctrl { - compatible = "marvell,mv78230-pinctrl"; -- reg = <0x18000 0x38>; -- -- sdio_pins: sdio-pins { -- marvell,pins = "mpp30", "mpp31", "mpp32", -- "mpp33", "mpp34", "mpp35"; -- marvell,function = "sd0"; -- }; - }; - - gpio0: gpio@18100 { ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -253,13 +253,6 @@ - internal-regs { - pinctrl { - compatible = "marvell,mv78260-pinctrl"; -- reg = <0x18000 0x38>; -- -- sdio_pins: sdio-pins { -- marvell,pins = "mpp30", "mpp31", "mpp32", -- "mpp33", "mpp34", "mpp35"; -- marvell,function = "sd0"; -- }; - }; - - gpio0: gpio@18100 { ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -291,13 +291,6 @@ - internal-regs { - pinctrl { - compatible = "marvell,mv78460-pinctrl"; -- reg = <0x18000 0x38>; -- -- sdio_pins: sdio-pins { -- marvell,pins = "mpp30", "mpp31", "mpp32", -- "mpp33", "mpp34", "mpp35"; -- marvell,function = "sd0"; -- }; - }; - - gpio0: gpio@18100 { ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -72,6 +72,16 @@ - status = "disabled"; - }; - -+ pinctrl { -+ reg = <0x18000 0x38>; -+ -+ sdio_pins: sdio-pins { -+ marvell,pins = "mpp30", "mpp31", "mpp32", -+ "mpp33", "mpp34", "mpp35"; -+ marvell,function = "sd0"; -+ }; -+ }; -+ - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x500>; diff --git a/target/linux/mvebu/patches-3.18/010-add_node_alias_to_pinctrl_and_add_base_address.patch b/target/linux/mvebu/patches-3.18/010-add_node_alias_to_pinctrl_and_add_base_address.patch deleted file mode 100644 index 7224361b66..0000000000 --- a/target/linux/mvebu/patches-3.18/010-add_node_alias_to_pinctrl_and_add_base_address.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 264a05e19bf50f93f1a377e16497a626ae9f931e Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 19 Sep 2014 21:12:00 +0200 -Subject: ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address - -In other MVEBU SoCs, the pin controller node is called pin-ctrl with -its base address added. Also, we have a node alias to access the pinctrl -node easily. Fix this for Armada XP pinctrl nodes to be consistent with -other SoCs. - -Signed-off-by: Sebastian Hesselbarth -Acked-by: Thomas Petazzoni -Tested-By: Benoit Masson -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts -+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts -@@ -60,7 +60,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - pinctrl-0 = <&pmx_phy_int>; - pinctrl-names = "default"; - ---- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts -+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts -@@ -51,7 +51,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - poweroff_pin: poweroff-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -167,7 +167,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78230-pinctrl"; - }; - ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -251,7 +251,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78260-pinctrl"; - }; - ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -289,7 +289,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78460-pinctrl"; - }; - ---- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts -+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts -@@ -55,7 +55,7 @@ - }; - - internal-regs { -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - poweroff: poweroff { - marvell,pins = "mpp42"; - marvell,function = "gpio"; ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -81,7 +81,7 @@ - serial@12100 { - status = "okay"; - }; -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -72,7 +72,7 @@ - status = "disabled"; - }; - -- pinctrl { -+ pinctrl: pin-ctrl@18000 { - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { diff --git a/target/linux/mvebu/patches-3.18/011-use_pinctrl_node_alias.patch b/target/linux/mvebu/patches-3.18/011-use_pinctrl_node_alias.patch deleted file mode 100644 index d10e09269a..0000000000 --- a/target/linux/mvebu/patches-3.18/011-use_pinctrl_node_alias.patch +++ /dev/null @@ -1,258 +0,0 @@ -From 01c434225ee67388711e78166cfe9b159e34fc9d Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 19 Sep 2014 21:20:09 +0200 -Subject: ARM: mvebu: armada-xp: Use pinctrl node alias - -Armada XP pinctrl node gained an alias, make use of it. - -Signed-off-by: Sebastian Hesselbarth -Acked-by: Thomas Petazzoni -Tested-By: Benoit Masson -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts -+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts -@@ -60,40 +60,6 @@ - }; - - internal-regs { -- pinctrl: pin-ctrl@18000 { -- pinctrl-0 = <&pmx_phy_int>; -- pinctrl-names = "default"; -- -- pmx_ge0: pmx-ge0 { -- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", -- "mpp4", "mpp5", "mpp6", "mpp7", -- "mpp8", "mpp9", "mpp10", "mpp11"; -- marvell,function = "ge0"; -- }; -- -- pmx_ge1: pmx-ge1 { -- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", -- "mpp16", "mpp17", "mpp18", "mpp19", -- "mpp20", "mpp21", "mpp22", "mpp23"; -- marvell,function = "ge1"; -- }; -- -- pmx_keys: pmx-keys { -- marvell,pins = "mpp33"; -- marvell,function = "gpio"; -- }; -- -- pmx_spi: pmx-spi { -- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; -- marvell,function = "spi"; -- }; -- -- pmx_phy_int: pmx-phy-int { -- marvell,pins = "mpp32"; -- marvell,function = "gpio"; -- }; -- }; -- - serial@12000 { - status = "okay"; - }; -@@ -162,3 +128,37 @@ - }; - }; - }; -+ -+&pinctrl { -+ pinctrl-0 = <&pmx_phy_int>; -+ pinctrl-names = "default"; -+ -+ pmx_ge0: pmx-ge0 { -+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", -+ "mpp4", "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", "mpp11"; -+ marvell,function = "ge0"; -+ }; -+ -+ pmx_ge1: pmx-ge1 { -+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", -+ "mpp16", "mpp17", "mpp18", "mpp19", -+ "mpp20", "mpp21", "mpp22", "mpp23"; -+ marvell,function = "ge1"; -+ }; -+ -+ pmx_keys: pmx-keys { -+ marvell,pins = "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_spi: pmx-spi { -+ marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; -+ marvell,function = "spi"; -+ }; -+ -+ pmx_phy_int: pmx-phy-int { -+ marvell,pins = "mpp32"; -+ marvell,function = "gpio"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts -+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts -@@ -51,37 +51,6 @@ - }; - - internal-regs { -- pinctrl: pin-ctrl@18000 { -- poweroff_pin: poweroff-pin { -- marvell,pins = "mpp24"; -- marvell,function = "gpio"; -- }; -- -- power_button_pin: power-button-pin { -- marvell,pins = "mpp44"; -- marvell,function = "gpio"; -- }; -- -- reset_button_pin: reset-button-pin { -- marvell,pins = "mpp45"; -- marvell,function = "gpio"; -- }; -- select_button_pin: select-button-pin { -- marvell,pins = "mpp41"; -- marvell,function = "gpio"; -- }; -- -- scroll_button_pin: scroll-button-pin { -- marvell,pins = "mpp42"; -- marvell,function = "gpio"; -- }; -- -- hdd_led_pin: hdd-led-pin { -- marvell,pins = "mpp26"; -- marvell,function = "gpio"; -- }; -- }; -- - serial@12000 { - status = "okay"; - }; -@@ -282,3 +251,34 @@ - gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; - }; -+ -+&pinctrl { -+ poweroff_pin: poweroff-pin { -+ marvell,pins = "mpp24"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_button_pin: power-button-pin { -+ marvell,pins = "mpp44"; -+ marvell,function = "gpio"; -+ }; -+ -+ reset_button_pin: reset-button-pin { -+ marvell,pins = "mpp45"; -+ marvell,function = "gpio"; -+ }; -+ select_button_pin: select-button-pin { -+ marvell,pins = "mpp41"; -+ marvell,function = "gpio"; -+ }; -+ -+ scroll_button_pin: scroll-button-pin { -+ marvell,pins = "mpp42"; -+ marvell,function = "gpio"; -+ }; -+ -+ hdd_led_pin: hdd-led-pin { -+ marvell,pins = "mpp26"; -+ marvell,function = "gpio"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -167,10 +167,6 @@ - }; - - internal-regs { -- pinctrl: pin-ctrl@18000 { -- compatible = "marvell,mv78230-pinctrl"; -- }; -- - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; -@@ -195,3 +191,7 @@ - }; - }; - }; -+ -+&pinctrl { -+ compatible = "marvell,mv78230-pinctrl"; -+}; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -251,10 +251,6 @@ - }; - - internal-regs { -- pinctrl: pin-ctrl@18000 { -- compatible = "marvell,mv78260-pinctrl"; -- }; -- - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; -@@ -298,3 +294,7 @@ - }; - }; - }; -+ -+&pinctrl { -+ compatible = "marvell,mv78260-pinctrl"; -+}; ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -289,10 +289,6 @@ - }; - - internal-regs { -- pinctrl: pin-ctrl@18000 { -- compatible = "marvell,mv78460-pinctrl"; -- }; -- - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; -@@ -336,3 +332,7 @@ - }; - }; - }; -+ -+&pinctrl { -+ compatible = "marvell,mv78460-pinctrl"; -+}; ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -81,12 +81,7 @@ - serial@12100 { - status = "okay"; - }; -- pinctrl: pin-ctrl@18000 { -- led_pins: led-pins-0 { -- marvell,pins = "mpp49", "mpp51", "mpp53"; -- marvell,function = "gpio"; -- }; -- }; -+ - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; -@@ -191,3 +186,10 @@ - }; - }; - }; -+ -+&pinctrl { -+ led_pins: led-pins-0 { -+ marvell,pins = "mpp49", "mpp51", "mpp53"; -+ marvell,function = "gpio"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.18/012-move_ge_pinctrl_settings_for_rgmii.patch b/target/linux/mvebu/patches-3.18/012-move_ge_pinctrl_settings_for_rgmii.patch deleted file mode 100644 index 0aadd892c4..0000000000 --- a/target/linux/mvebu/patches-3.18/012-move_ge_pinctrl_settings_for_rgmii.patch +++ /dev/null @@ -1,81 +0,0 @@ -From e59451432d7e0f7953e29c15e70111dfdbecc145 Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 19 Sep 2014 21:24:34 +0200 -Subject: ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII - -Pinctrl settings for GE0 and GE1 are not only usable on RD-AXPWiFiAP. -Moreover, naming the RGMII settings pmx-ge{0,1} is not precise enough -as there is also a GMII setting for GE0. - -Move the pinctrl sub-nodes to the common pinctrl node and rename them -to pmx-ge{0,1}-rgmii. - -Signed-off-by: Sebastian Hesselbarth -Tested-By: Benoit Masson -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts -+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts -@@ -84,14 +84,14 @@ - }; - - ethernet@70000 { -- pinctrl-0 = <&pmx_ge0>; -+ pinctrl-0 = <&pmx_ge0_rgmii>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { -- pinctrl-0 = <&pmx_ge1>; -+ pinctrl-0 = <&pmx_ge1_rgmii>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy1>; -@@ -133,20 +133,6 @@ - pinctrl-0 = <&pmx_phy_int>; - pinctrl-names = "default"; - -- pmx_ge0: pmx-ge0 { -- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", -- "mpp4", "mpp5", "mpp6", "mpp7", -- "mpp8", "mpp9", "mpp10", "mpp11"; -- marvell,function = "ge0"; -- }; -- -- pmx_ge1: pmx-ge1 { -- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", -- "mpp16", "mpp17", "mpp18", "mpp19", -- "mpp20", "mpp21", "mpp22", "mpp23"; -- marvell,function = "ge1"; -- }; -- - pmx_keys: pmx-keys { - marvell,pins = "mpp33"; - marvell,function = "gpio"; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -75,6 +75,22 @@ - pinctrl: pin-ctrl@18000 { - reg = <0x18000 0x38>; - -+ pmx_ge0_rgmii: pmx-ge0-rgmii { -+ marvell,pins = -+ "mpp0", "mpp1", "mpp2", "mpp3", -+ "mpp4", "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", "mpp11"; -+ marvell,function = "ge0"; -+ }; -+ -+ pmx_ge1_rgmii: pmx-ge1-rgmii { -+ marvell,pins = -+ "mpp12", "mpp13", "mpp14", "mpp15", -+ "mpp16", "mpp17", "mpp18", "mpp19", -+ "mpp20", "mpp21", "mpp22", "mpp23"; -+ marvell,function = "ge1"; -+ }; -+ - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; diff --git a/target/linux/mvebu/patches-3.18/013-add_ge0_pinctrl_settings_for_gmii.patch b/target/linux/mvebu/patches-3.18/013-add_ge0_pinctrl_settings_for_gmii.patch deleted file mode 100644 index 37bdae6c5f..0000000000 --- a/target/linux/mvebu/patches-3.18/013-add_ge0_pinctrl_settings_for_gmii.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 7254f6c52b5da38c0a79ab953d34e556fe16942f Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 19 Sep 2014 21:27:55 +0200 -Subject: ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII - -There is a GMII setting for GE0, add it to the common pinctrl node. - -Signed-off-by: Sebastian Hesselbarth -Tested-By: Benoit Masson -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -75,6 +75,17 @@ - pinctrl: pin-ctrl@18000 { - reg = <0x18000 0x38>; - -+ pmx_ge0_gmii: pmx-ge0-gmii { -+ marvell,pins = -+ "mpp0", "mpp1", "mpp2", "mpp3", -+ "mpp4", "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", "mpp11", -+ "mpp12", "mpp13", "mpp14", "mpp15", -+ "mpp16", "mpp17", "mpp18", "mpp19", -+ "mpp20", "mpp21", "mpp22", "mpp23"; -+ marvell,function = "ge0"; -+ }; -+ - pmx_ge0_rgmii: pmx-ge0-rgmii { - marvell,pins = - "mpp0", "mpp1", "mpp2", "mpp3", diff --git a/target/linux/mvebu/patches-3.18/014-add_uartx_labels.patch b/target/linux/mvebu/patches-3.18/014-add_uartx_labels.patch deleted file mode 100644 index acd6ecc4ee..0000000000 --- a/target/linux/mvebu/patches-3.18/014-add_uartx_labels.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 181d9b28cbc9ae10e1467e2d013033b672d91d4b Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Sat, 22 Nov 2014 00:45:35 +0100 -Subject: arm: mvebu: add uartX labels for Armada SoC serial nodes - -This patch adds uartX labels for Armada SoC serial nodes. This is -a preliminary work to be able to easily reference the serial lines -in Device Tree files. One expected use is when providing stdout-path -property for barebox. - -Reviewed-by: Thomas Petazzoni -Acked-by: Andrew Lunn -Signed-off-by: Arnaud Ebalard -Link: https://lkml.kernel.org/r/0683d1a823fe9b75849f3dafcf1cf6ee291cdca6.1416613429.git.arno@natisbad.org -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -151,7 +151,7 @@ - status = "disabled"; - }; - -- serial@12000 { -+ uart0: serial@12000 { - compatible = "snps,dw-apb-uart"; - reg = <0x12000 0x100>; - reg-shift = <2>; -@@ -160,7 +160,8 @@ - clocks = <&coreclk 0>; - status = "disabled"; - }; -- serial@12100 { -+ -+ uart1: serial@12100 { - compatible = "snps,dw-apb-uart"; - reg = <0x12100 0x100>; - reg-shift = <2>; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -53,7 +53,7 @@ - reg = <0x11100 0x100>; - }; - -- serial@12200 { -+ uart2: serial@12200 { - compatible = "snps,dw-apb-uart"; - reg = <0x12200 0x100>; - reg-shift = <2>; -@@ -62,7 +62,8 @@ - clocks = <&coreclk 0>; - status = "disabled"; - }; -- serial@12300 { -+ -+ uart3: serial@12300 { - compatible = "snps,dw-apb-uart"; - reg = <0x12300 0x100>; - reg-shift = <2>; diff --git a/target/linux/mvebu/patches-3.18/015-move_armada_370_xp_pinctrl_node_definition.patch b/target/linux/mvebu/patches-3.18/015-move_armada_370_xp_pinctrl_node_definition.patch deleted file mode 100644 index ed36d680eb..0000000000 --- a/target/linux/mvebu/patches-3.18/015-move_armada_370_xp_pinctrl_node_definition.patch +++ /dev/null @@ -1,538 +0,0 @@ -From 4904a82a9399d037588162e6fb4b293fa6a37f7c Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Sat, 22 Nov 2014 00:45:56 +0100 -Subject: arm: mvebu: move Armada 370/XP pinctrl node definition - armada-370-xp.dtsi - -What was done by Sebastian in 264a05e19bf5 ("ARM: mvebu: armada-xp: -Add node alias to pinctrl and add base address") and 01c434225ee6 -("ARM: mvebu: armada-xp: Use pinctrl node alias") can also be done for -Armada 370, i.e. - - - Rename Armada 370 pinctrl node to pin-ctrl with its address encoded - - Add a node alias to access the pinctrl node easily. - - use the newly available alias in existing Armada 370 .dts files - -We can even go a bit further by putting the pinctrl node definition in -armada-370-xp.dtsi, with only its reg property defined. This allows us -to then also use the newly defined node alias in armada-xp.dtsi, -armada-370.dtsi. - -Suggested-by: Sebastian Hesselbarth -Suggested-by: Andrew Lunn -Acked-by: Andrew Lunn -Signed-off-by: Arnaud Ebalard -Link: https://lkml.kernel.org/r/b54eb45e5242728aace3ce8aef2eae4251f8dea3.1416613429.git.arno@natisbad.org -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -157,3 +157,27 @@ - compatible = "linux,spdif-dir"; - }; - }; -+ -+&pinctrl { -+ /* -+ * These pins might be muxed as I2S by -+ * the bootloader, but it conflicts -+ * with the real I2S pins that are -+ * muxed using i2s_pins. We must mux -+ * those pins to a function other than -+ * I2S. -+ */ -+ pinctrl-0 = <&hog_pins1 &hog_pins2>; -+ pinctrl-names = "default"; -+ -+ hog_pins1: hog-pins1 { -+ marvell,pins = "mpp6", "mpp8", "mpp10", -+ "mpp12", "mpp13"; -+ marvell,function = "gpio"; -+ }; -+ -+ hog_pins2: hog-pins2 { -+ marvell,pins = "mpp5", "mpp7", "mpp9"; -+ marvell,function = "gpo"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -54,18 +54,6 @@ - status = "okay"; - }; - -- pinctrl { -- pwr_led_pin: pwr-led-pin { -- marvell,pins = "mpp63"; -- marvell,function = "gpo"; -- }; -- -- stat_led_pins: stat-led-pins { -- marvell,pins = "mpp64", "mpp65"; -- marvell,function = "gpio"; -- }; -- }; -- - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; -@@ -169,3 +157,16 @@ - }; - }; - }; -+ -+&pinctrl { -+ pwr_led_pin: pwr-led-pin { -+ marvell,pins = "mpp63"; -+ marvell,function = "gpo"; -+ }; -+ -+ stat_led_pins: stat-led-pins { -+ marvell,pins = "mpp64", "mpp65"; -+ marvell,function = "gpio"; -+ }; -+}; -+ ---- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts -+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts -@@ -58,48 +58,6 @@ - status = "okay"; - }; - -- pinctrl { -- power_led_pin: power-led-pin { -- marvell,pins = "mpp57"; -- marvell,function = "gpio"; -- }; -- -- sata1_led_pin: sata1-led-pin { -- marvell,pins = "mpp15"; -- marvell,function = "gpio"; -- }; -- -- sata2_led_pin: sata2-led-pin { -- marvell,pins = "mpp14"; -- marvell,function = "gpio"; -- }; -- -- backup_led_pin: backup-led-pin { -- marvell,pins = "mpp56"; -- marvell,function = "gpio"; -- }; -- -- backup_button_pin: backup-button-pin { -- marvell,pins = "mpp58"; -- marvell,function = "gpio"; -- }; -- -- power_button_pin: power-button-pin { -- marvell,pins = "mpp62"; -- marvell,function = "gpio"; -- }; -- -- reset_button_pin: reset-button-pin { -- marvell,pins = "mpp6"; -- marvell,function = "gpio"; -- }; -- -- poweroff: poweroff { -- marvell,pins = "mpp8"; -- marvell,function = "gpio"; -- }; -- }; -- - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -@@ -256,3 +214,45 @@ - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - }; -+ -+&pinctrl { -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp57"; -+ marvell,function = "gpio"; -+ }; -+ -+ sata1_led_pin: sata1-led-pin { -+ marvell,pins = "mpp15"; -+ marvell,function = "gpio"; -+ }; -+ -+ sata2_led_pin: sata2-led-pin { -+ marvell,pins = "mpp14"; -+ marvell,function = "gpio"; -+ }; -+ -+ backup_led_pin: backup-led-pin { -+ marvell,pins = "mpp56"; -+ marvell,function = "gpio"; -+ }; -+ -+ backup_button_pin: backup-button-pin { -+ marvell,pins = "mpp58"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_button_pin: power-button-pin { -+ marvell,pins = "mpp62"; -+ marvell,function = "gpio"; -+ }; -+ -+ reset_button_pin: reset-button-pin { -+ marvell,pins = "mpp6"; -+ marvell,function = "gpio"; -+ }; -+ -+ poweroff: poweroff { -+ marvell,pins = "mpp8"; -+ marvell,function = "gpio"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts -+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts -@@ -53,38 +53,6 @@ - status = "okay"; - }; - -- pinctrl { -- poweroff: poweroff { -- marvell,pins = "mpp60"; -- marvell,function = "gpio"; -- }; -- -- backup_button_pin: backup-button-pin { -- marvell,pins = "mpp52"; -- marvell,function = "gpio"; -- }; -- -- power_button_pin: power-button-pin { -- marvell,pins = "mpp62"; -- marvell,function = "gpio"; -- }; -- -- backup_led_pin: backup-led-pin { -- marvell,pins = "mpp63"; -- marvell,function = "gpo"; -- }; -- -- power_led_pin: power-led-pin { -- marvell,pins = "mpp64"; -- marvell,function = "gpio"; -- }; -- -- reset_button_pin: reset-button-pin { -- marvell,pins = "mpp65"; -- marvell,function = "gpio"; -- }; -- }; -- - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -@@ -269,3 +237,35 @@ - gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - }; - }; -+ -+&pinctrl { -+ poweroff: poweroff { -+ marvell,pins = "mpp60"; -+ marvell,function = "gpio"; -+ }; -+ -+ backup_button_pin: backup-button-pin { -+ marvell,pins = "mpp52"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_button_pin: power-button-pin { -+ marvell,pins = "mpp62"; -+ marvell,function = "gpio"; -+ }; -+ -+ backup_led_pin: backup-led-pin { -+ marvell,pins = "mpp63"; -+ marvell,function = "gpo"; -+ }; -+ -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp64"; -+ marvell,function = "gpio"; -+ }; -+ -+ reset_button_pin: reset-button-pin { -+ marvell,pins = "mpp65"; -+ marvell,function = "gpio"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -59,18 +59,6 @@ - }; - - internal-regs { -- pinctrl { -- fan_pins: fan-pins { -- marvell,pins = "mpp8"; -- marvell,function = "gpio"; -- }; -- -- led_pins: led-pins { -- marvell,pins = "mpp32"; -- marvell,function = "gpio"; -- }; -- }; -- - serial@12000 { - status = "okay"; - }; -@@ -174,3 +162,15 @@ - }; - }; - }; -+ -+&pinctrl { -+ fan_pins: fan-pins { -+ marvell,pins = "mpp8"; -+ marvell,function = "gpio"; -+ }; -+ -+ led_pins: led-pins { -+ marvell,pins = "mpp32"; -+ marvell,function = "gpio"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -171,6 +171,10 @@ - status = "disabled"; - }; - -+ pinctrl: pin-ctrl@18000 { -+ reg = <0x18000 0x38>; -+ }; -+ - coredivclk: corediv-clock@18740 { - compatible = "marvell,armada-370-corediv-clock"; - reg = <0x18740 0xc>; ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -107,67 +107,6 @@ - reg = <0x11100 0x20>; - }; - -- pinctrl { -- compatible = "marvell,mv88f6710-pinctrl"; -- reg = <0x18000 0x38>; -- -- sdio_pins1: sdio-pins1 { -- marvell,pins = "mpp9", "mpp11", "mpp12", -- "mpp13", "mpp14", "mpp15"; -- marvell,function = "sd0"; -- }; -- -- sdio_pins2: sdio-pins2 { -- marvell,pins = "mpp47", "mpp48", "mpp49", -- "mpp50", "mpp51", "mpp52"; -- marvell,function = "sd0"; -- }; -- -- sdio_pins3: sdio-pins3 { -- marvell,pins = "mpp48", "mpp49", "mpp50", -- "mpp51", "mpp52", "mpp53"; -- marvell,function = "sd0"; -- }; -- -- i2c0_pins: i2c0-pins { -- marvell,pins = "mpp2", "mpp3"; -- marvell,function = "i2c0"; -- }; -- -- i2s_pins1: i2s-pins1 { -- marvell,pins = "mpp5", "mpp6", "mpp7", -- "mpp8", "mpp9", "mpp10", -- "mpp12", "mpp13"; -- marvell,function = "audio"; -- }; -- -- i2s_pins2: i2s-pins2 { -- marvell,pins = "mpp49", "mpp47", "mpp50", -- "mpp59", "mpp57", "mpp61", -- "mpp62", "mpp60", "mpp58"; -- marvell,function = "audio"; -- }; -- -- mdio_pins: mdio-pins { -- marvell,pins = "mpp17", "mpp18"; -- marvell,function = "ge"; -- }; -- -- ge0_rgmii_pins: ge0-rgmii-pins { -- marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", -- "mpp9", "mpp10", "mpp11", "mpp12", -- "mpp13", "mpp14", "mpp15", "mpp16"; -- marvell,function = "ge0"; -- }; -- -- ge1_rgmii_pins: ge1-rgmii-pins { -- marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", -- "mpp23", "mpp24", "mpp25", "mpp26", -- "mpp27", "mpp28", "mpp29", "mpp30"; -- marvell,function = "ge1"; -- }; -- }; -- - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; -@@ -314,3 +253,63 @@ - }; - }; - }; -+ -+&pinctrl { -+ compatible = "marvell,mv88f6710-pinctrl"; -+ -+ sdio_pins1: sdio-pins1 { -+ marvell,pins = "mpp9", "mpp11", "mpp12", -+ "mpp13", "mpp14", "mpp15"; -+ marvell,function = "sd0"; -+ }; -+ -+ sdio_pins2: sdio-pins2 { -+ marvell,pins = "mpp47", "mpp48", "mpp49", -+ "mpp50", "mpp51", "mpp52"; -+ marvell,function = "sd0"; -+ }; -+ -+ sdio_pins3: sdio-pins3 { -+ marvell,pins = "mpp48", "mpp49", "mpp50", -+ "mpp51", "mpp52", "mpp53"; -+ marvell,function = "sd0"; -+ }; -+ -+ i2c0_pins: i2c0-pins { -+ marvell,pins = "mpp2", "mpp3"; -+ marvell,function = "i2c0"; -+ }; -+ -+ i2s_pins1: i2s-pins1 { -+ marvell,pins = "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", -+ "mpp12", "mpp13"; -+ marvell,function = "audio"; -+ }; -+ -+ i2s_pins2: i2s-pins2 { -+ marvell,pins = "mpp49", "mpp47", "mpp50", -+ "mpp59", "mpp57", "mpp61", -+ "mpp62", "mpp60", "mpp58"; -+ marvell,function = "audio"; -+ }; -+ -+ mdio_pins: mdio-pins { -+ marvell,pins = "mpp17", "mpp18"; -+ marvell,function = "ge"; -+ }; -+ -+ ge0_rgmii_pins: ge0-rgmii-pins { -+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", -+ "mpp9", "mpp10", "mpp11", "mpp12", -+ "mpp13", "mpp14", "mpp15", "mpp16"; -+ marvell,function = "ge0"; -+ }; -+ -+ ge1_rgmii_pins: ge1-rgmii-pins { -+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", -+ "mpp23", "mpp24", "mpp25", "mpp26", -+ "mpp27", "mpp28", "mpp29", "mpp30"; -+ marvell,function = "ge1"; -+ }; -+}; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -73,43 +73,6 @@ - status = "disabled"; - }; - -- pinctrl: pin-ctrl@18000 { -- reg = <0x18000 0x38>; -- -- pmx_ge0_gmii: pmx-ge0-gmii { -- marvell,pins = -- "mpp0", "mpp1", "mpp2", "mpp3", -- "mpp4", "mpp5", "mpp6", "mpp7", -- "mpp8", "mpp9", "mpp10", "mpp11", -- "mpp12", "mpp13", "mpp14", "mpp15", -- "mpp16", "mpp17", "mpp18", "mpp19", -- "mpp20", "mpp21", "mpp22", "mpp23"; -- marvell,function = "ge0"; -- }; -- -- pmx_ge0_rgmii: pmx-ge0-rgmii { -- marvell,pins = -- "mpp0", "mpp1", "mpp2", "mpp3", -- "mpp4", "mpp5", "mpp6", "mpp7", -- "mpp8", "mpp9", "mpp10", "mpp11"; -- marvell,function = "ge0"; -- }; -- -- pmx_ge1_rgmii: pmx-ge1-rgmii { -- marvell,pins = -- "mpp12", "mpp13", "mpp14", "mpp15", -- "mpp16", "mpp17", "mpp18", "mpp19", -- "mpp20", "mpp21", "mpp22", "mpp23"; -- marvell,function = "ge1"; -- }; -- -- sdio_pins: sdio-pins { -- marvell,pins = "mpp30", "mpp31", "mpp32", -- "mpp33", "mpp34", "mpp35"; -- marvell,function = "sd0"; -- }; -- }; -- - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x500>; -@@ -246,3 +209,38 @@ - }; - }; - }; -+ -+&pinctrl { -+ pmx_ge0_gmii: pmx-ge0-gmii { -+ marvell,pins = -+ "mpp0", "mpp1", "mpp2", "mpp3", -+ "mpp4", "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", "mpp11", -+ "mpp12", "mpp13", "mpp14", "mpp15", -+ "mpp16", "mpp17", "mpp18", "mpp19", -+ "mpp20", "mpp21", "mpp22", "mpp23"; -+ marvell,function = "ge0"; -+ }; -+ -+ pmx_ge0_rgmii: pmx-ge0-rgmii { -+ marvell,pins = -+ "mpp0", "mpp1", "mpp2", "mpp3", -+ "mpp4", "mpp5", "mpp6", "mpp7", -+ "mpp8", "mpp9", "mpp10", "mpp11"; -+ marvell,function = "ge0"; -+ }; -+ -+ pmx_ge1_rgmii: pmx-ge1-rgmii { -+ marvell,pins = -+ "mpp12", "mpp13", "mpp14", "mpp15", -+ "mpp16", "mpp17", "mpp18", "mpp19", -+ "mpp20", "mpp21", "mpp22", "mpp23"; -+ marvell,function = "ge1"; -+ }; -+ -+ sdio_pins: sdio-pins { -+ marvell,pins = "mpp30", "mpp31", "mpp32", -+ "mpp33", "mpp34", "mpp35"; -+ marvell,function = "sd0"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.18/016-common_armada_xp_uart2_3_pinctrl.patch b/target/linux/mvebu/patches-3.18/016-common_armada_xp_uart2_3_pinctrl.patch deleted file mode 100644 index 4cccdb3b97..0000000000 --- a/target/linux/mvebu/patches-3.18/016-common_armada_xp_uart2_3_pinctrl.patch +++ /dev/null @@ -1,52 +0,0 @@ -From d352f41e87e7226692d1346bb97c603615eeb817 Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Sat, 22 Nov 2014 00:46:28 +0100 -Subject: arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings - -This patch defines common Armada XP pinctrl settings for uart2 and -uart3 interfaces (uart0 and uart1 rx/tx do not rely on MPP): - - uart2: MPP42-43 as default - uart3: MPP44-45 as default - -Suggested-by: Andrew Lunn -Acked-by: Andrew Lunn -Signed-off-by: Arnaud Ebalard -Link: https://lkml.kernel.org/r/fd51c080c7139a67ec01df8d797f1e88ce557796.1416613429.git.arno@natisbad.org -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -55,6 +55,8 @@ - - uart2: serial@12200 { - compatible = "snps,dw-apb-uart"; -+ pinctrl-0 = <&uart2_pins>; -+ pinctrl-names = "default"; - reg = <0x12200 0x100>; - reg-shift = <2>; - interrupts = <43>; -@@ -65,6 +67,8 @@ - - uart3: serial@12300 { - compatible = "snps,dw-apb-uart"; -+ pinctrl-0 = <&uart3_pins>; -+ pinctrl-names = "default"; - reg = <0x12300 0x100>; - reg-shift = <2>; - interrupts = <44>; -@@ -243,4 +247,14 @@ - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; -+ -+ uart2_pins: uart2-pins { -+ marvell,pins = "mpp42", "mpp43"; -+ marvell,function = "uart2"; -+ }; -+ -+ uart3_pins: uart3-pins { -+ marvell,pins = "mpp44", "mpp45"; -+ marvell,function = "uart3"; -+ }; - }; diff --git a/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch b/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch deleted file mode 100644 index 9085db00d2..0000000000 --- a/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 547c653b64022618250ca9c7c30151927509ae98 Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Sat, 22 Nov 2014 00:46:39 +0100 -Subject: arm: mvebu: define and use common Armada XP SPI pinctrl setting - -This patch defines common Armada XP pinctrl settings in armada-xp.dtsi -for the supported SPI interface (MPP36-39) and use it as default -for Armada XP spi interface. That being done, it removes the now -redundant definitions in armada-xp-axpwifiap.dts. - -Note: this patch has the potential to break out-of-tree users w/o -specific pinctrl settings for their spi interfaces if the default -above does not match their config (i.e. if they do not use CS0). - -Acked-by: Andrew Lunn -Signed-off-by: Arnaud Ebalard -Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts -+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts -@@ -100,8 +100,6 @@ - - spi0: spi@10600 { - status = "okay"; -- pinctrl-0 = <&pmx_spi>; -- pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; -@@ -138,11 +136,6 @@ - marvell,function = "gpio"; - }; - -- pmx_spi: pmx-spi { -- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; -- marvell,function = "spi"; -- }; -- - pmx_phy_int: pmx-phy-int { - marvell,pins = "mpp32"; - marvell,function = "gpio"; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -43,6 +43,11 @@ - wt-override; - }; - -+ spi0: spi@10600 { -+ pinctrl-0 = <&spi0_pins>; -+ pinctrl-names = "default"; -+ }; -+ - i2c0: i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; -@@ -248,6 +253,12 @@ - marvell,function = "sd0"; - }; - -+ spi0_pins: spi0-pins { -+ marvell,pins = "mpp36", "mpp37", -+ "mpp38", "mpp39"; -+ marvell,function = "spi"; -+ }; -+ - uart2_pins: uart2-pins { - marvell,pins = "mpp42", "mpp43"; - marvell,function = "uart2"; diff --git a/target/linux/mvebu/patches-3.18/018-normalize_pinctrl_entries_for_armada_socs.patch b/target/linux/mvebu/patches-3.18/018-normalize_pinctrl_entries_for_armada_socs.patch deleted file mode 100644 index ca7b13bed4..0000000000 --- a/target/linux/mvebu/patches-3.18/018-normalize_pinctrl_entries_for_armada_socs.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 70ee4e9d9f054e258480fd51c90cfc2b72be8b78 Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Sat, 22 Nov 2014 17:23:30 +0100 -Subject: arm: mvebu: normalize pinctrl entries for Armada SoCs - -There are currently 2 differents naming conventions used between the -existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s) -and pmx_*: pmx-*) with a vast majority of files using the former: - -$ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l -155 -$ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l -13 - -In fact, only some Armada XP files are using the second variant. -This patch normalizes those files (mainly ge0/1 entries) to use -the first variant. - -Signed-off-by: Arnaud Ebalard -Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org -Signed-off-by: Jason Cooper - ---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts -+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts -@@ -84,14 +84,14 @@ - }; - - ethernet@70000 { -- pinctrl-0 = <&pmx_ge0_rgmii>; -+ pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { -- pinctrl-0 = <&pmx_ge1_rgmii>; -+ pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy = <&phy1>; -@@ -116,7 +116,7 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- pinctrl-0 = <&pmx_keys>; -+ pinctrl-0 = <&keys_pin>; - pinctrl-names = "default"; - - button@1 { -@@ -128,15 +128,15 @@ - }; - - &pinctrl { -- pinctrl-0 = <&pmx_phy_int>; -+ pinctrl-0 = <&phy_int_pin>; - pinctrl-names = "default"; - -- pmx_keys: pmx-keys { -+ keys_pin: keys-pin { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - -- pmx_phy_int: pmx-phy-int { -+ phy_int_pin: phy-int-pin { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -220,7 +220,7 @@ - }; - - &pinctrl { -- pmx_ge0_gmii: pmx-ge0-gmii { -+ ge0_gmii_pins: ge0-gmii-pins { - marvell,pins = - "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", -@@ -231,7 +231,7 @@ - marvell,function = "ge0"; - }; - -- pmx_ge0_rgmii: pmx-ge0-rgmii { -+ ge0_rgmii_pins: ge0-rgmii-pins { - marvell,pins = - "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", -@@ -239,7 +239,7 @@ - marvell,function = "ge0"; - }; - -- pmx_ge1_rgmii: pmx-ge1-rgmii { -+ ge1_rgmii_pins: ge1-rgmii-pins { - marvell,pins = - "mpp12", "mpp13", "mpp14", "mpp15", - "mpp16", "mpp17", "mpp18", "mpp19", diff --git a/target/linux/mvebu/patches-3.18/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch b/target/linux/mvebu/patches-3.18/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch deleted file mode 100644 index 551d5bf510..0000000000 --- a/target/linux/mvebu/patches-3.18/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 91b4c91f919abffa72cbf7545a944252f8e4f775 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 8 Jan 2015 18:38:08 +0100 -Subject: [PATCH 3/4] ARM: mvebu: Add a number of pinctrl functions - -Some pinctrl functions can be shared with all DTS out there, since they are -generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid -duplication. - -Signed-off-by: Maxime Ripard -Acked-by: Gregory CLEMENT -Signed-off-by: Gregory CLEMENT -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -196,6 +196,45 @@ - pinctrl { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; -+ -+ ge0_rgmii_pins: ge-rgmii-pins-0 { -+ marvell,pins = "mpp6", "mpp7", "mpp8", -+ "mpp9", "mpp10", "mpp11", -+ "mpp12", "mpp13", "mpp14", -+ "mpp15", "mpp16", "mpp17"; -+ marvell,function = "ge0"; -+ }; -+ -+ i2c0_pins: i2c-pins-0 { -+ marvell,pins = "mpp2", "mpp3"; -+ marvell,function = "i2c0"; -+ }; -+ -+ mdio_pins: mdio-pins { -+ marvell,pins = "mpp4", "mpp5"; -+ marvell,function = "ge"; -+ }; -+ -+ ref_clk0_pins: ref-clk-pins-0 { -+ marvell,pins = "mpp45"; -+ marvell,function = "ref"; -+ }; -+ -+ spi1_pins: spi-pins-1 { -+ marvell,pins = "mpp56", "mpp57", "mpp58", -+ "mpp59"; -+ marvell,function = "spi1"; -+ }; -+ -+ uart0_pins: uart-pins-0 { -+ marvell,pins = "mpp0", "mpp1"; -+ marvell,function = "ua0"; -+ }; -+ -+ uart1_pins: uart-pins-1 { -+ marvell,pins = "mpp19", "mpp20"; -+ marvell,function = "ua1"; -+ }; - }; - - gpio0: gpio@18100 { diff --git a/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch b/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch deleted file mode 100644 index cc9311b608..0000000000 --- a/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch +++ /dev/null @@ -1,212 +0,0 @@ -From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 8 Jan 2015 18:38:09 +0100 -Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board - support - -The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB -SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage. - -[gregory.clement@free-electrons.com: switch the license to the dual -X11/GPL with the agreement of the author] - -Signed-off-by: Maxime Ripard -Signed-off-by: Gregory CLEMENT -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++ - 2 files changed, 179 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -500,6 +500,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - armada-375-db.dtb - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ -+ armada-385-db-ap.dtb \ - armada-385-rd.dtb - dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-axpwifiap.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -0,0 +1,178 @@ -+/* -+ * Device Tree file for Marvell Armada 385 Access Point Development board -+ * (DB-88F6820-AP) -+ * -+ * Copyright (C) 2014 Marvell -+ * -+ * Nadav Haklai -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "armada-385.dtsi" -+ -+#include -+ -+/ { -+ model = "Marvell Armada 385 Access Point Development Board"; -+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart1; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x80000000>; /* 2GB */ -+ }; -+ -+ soc { -+ ranges = ; -+ -+ internal-regs { -+ spi1: spi@10680 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins>; -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "st,m25p128"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <54000000>; -+ }; -+ }; -+ -+ i2c0: i2c@11000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ status = "okay"; -+ -+ /* -+ * This bus is wired to two EEPROM -+ * sockets, one of which holding the -+ * board ID used by the bootloader. -+ * Erasing this EEPROM's content will -+ * brick the board. -+ * Use this bus with caution. -+ */ -+ }; -+ -+ mdio@72004 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mdio_pins>; -+ -+ phy0: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ phy1: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ -+ phy2: ethernet-phy@6 { -+ reg = <6>; -+ }; -+ }; -+ -+ /* UART0 is exposed through the JP8 connector */ -+ uart0: serial@12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ -+ /* -+ * UART1 is exposed through a FTDI chip -+ * wired to the mini-USB connector -+ */ -+ uart1: serial@12100 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+ }; -+ -+ ethernet@30000 { -+ status = "okay"; -+ phy = <&phy2>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@34000 { -+ status = "okay"; -+ phy = <&phy1>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-names = "default"; -+ -+ /* -+ * The Reference Clock 0 is used to -+ * provide a clock to the PHY -+ */ -+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; -+ status = "okay"; -+ phy = <&phy0>; -+ phy-mode = "rgmii-id"; -+ }; -+ }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* -+ * The three PCIe units are accessible through -+ * standard mini-PCIe slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@3,0 { -+ /* Port 2, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.18/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch b/target/linux/mvebu/patches-3.18/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch deleted file mode 100644 index 3c4a111e4a..0000000000 --- a/target/linux/mvebu/patches-3.18/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 11 Dec 2014 14:14:58 +0100 -Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller - -The A385 AP has a 1GB NAND chip. Enable it. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -150,6 +150,19 @@ - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; -+ -+ nfc: flash@d0000 { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ num-cs = <1>; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ }; - }; - - pcie-controller { diff --git a/target/linux/mvebu/patches-3.18/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch b/target/linux/mvebu/patches-3.18/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch deleted file mode 100644 index 07f8e2994d..0000000000 --- a/target/linux/mvebu/patches-3.18/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch +++ /dev/null @@ -1,37 +0,0 @@ -From a95308d88c07e0093aedae7e64f92cb1e165f592 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Fri, 5 Dec 2014 15:44:57 +0100 -Subject: [PATCH] pinctrl: mvebu: a38x: Add UART1 muxing options - -The MPP19 and MMP20 pins also have the ability to be muxed to the uart1 -function. - -Add this case to the pinctrl driver. - -Signed-off-by: Maxime Ripard -Acked-by: Jason Cooper -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c -+++ b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c -@@ -146,13 +146,15 @@ static struct mvebu_mpp_mode armada_38x_ - MPP_VAR_FUNCTION(2, "ptp", "event_req", V_88F6810_PLUS), - MPP_VAR_FUNCTION(3, "ge0", "txerr", V_88F6810_PLUS), - MPP_VAR_FUNCTION(4, "sata1", "prsnt", V_88F6810_PLUS), -- MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS)), -+ MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS), -+ MPP_VAR_FUNCTION(6, "ua1", "rxd", V_88F6810_PLUS)), - MPP_MODE(20, - MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS), - MPP_VAR_FUNCTION(1, "ge0", "txclk", V_88F6810_PLUS), - MPP_VAR_FUNCTION(2, "ptp", "clk", V_88F6810_PLUS), - MPP_VAR_FUNCTION(4, "sata0", "prsnt", V_88F6810_PLUS), -- MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS)), -+ MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS), -+ MPP_VAR_FUNCTION(6, "ua1", "txd", V_88F6810_PLUS)), - MPP_MODE(21, - MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS), - MPP_VAR_FUNCTION(1, "spi0", "cs1", V_88F6810_PLUS), diff --git a/target/linux/mvebu/patches-3.18/024-ARM-mvebu-a38x-Fix-node-names.patch b/target/linux/mvebu/patches-3.18/024-ARM-mvebu-a38x-Fix-node-names.patch deleted file mode 100644 index 37dd4c257c..0000000000 --- a/target/linux/mvebu/patches-3.18/024-ARM-mvebu-a38x-Fix-node-names.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 4a25432b13090b57d257fa0ffb6712d8acf94523 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 8 Jan 2015 18:38:05 +0100 -Subject: [PATCH 1/4] ARM: mvebu: a38x: Fix node names - -Some nodes in the DTs have a reg property but no unit name in their node name. - -This contradicts the way the ePAPR defines the node names. Fix this. - -Signed-off-by: Maxime Ripard -Acked-by: Gregory CLEMENT -Signed-off-by: Gregory CLEMENT -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-380.dtsi | 2 +- - arch/arm/boot/dts/armada-385-db.dts | 2 +- - arch/arm/boot/dts/armada-385-rd.dts | 2 +- - arch/arm/boot/dts/armada-385.dtsi | 2 +- - arch/arm/boot/dts/armada-38x.dtsi | 4 ++-- - 5 files changed, 6 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/armada-380.dtsi -+++ b/arch/arm/boot/dts/armada-380.dtsi -@@ -32,7 +32,7 @@ - - soc { - internal-regs { -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6810-pinctrl"; - reg = <0x18000 0x20>; - }; ---- a/arch/arm/boot/dts/armada-385-db.dts -+++ b/arch/arm/boot/dts/armada-385-db.dts -@@ -74,7 +74,7 @@ - phy-mode = "rgmii-id"; - }; - -- mdio { -+ mdio@72004 { - phy0: ethernet-phy@0 { - reg = <0>; - }; ---- a/arch/arm/boot/dts/armada-385-rd.dts -+++ b/arch/arm/boot/dts/armada-385-rd.dts -@@ -67,7 +67,7 @@ - }; - - -- mdio { -+ mdio@72004 { - phy0: ethernet-phy@0 { - reg = <0>; - }; ---- a/arch/arm/boot/dts/armada-385.dtsi -+++ b/arch/arm/boot/dts/armada-385.dtsi -@@ -37,7 +37,7 @@ - - soc { - internal-regs { -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; - }; ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -193,7 +193,7 @@ - status = "disabled"; - }; - -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; - -@@ -412,7 +412,7 @@ - status = "disabled"; - }; - -- mdio { -+ mdio@72004 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; diff --git a/target/linux/mvebu/patches-3.18/025-ARM-mvebu-Use-arm_coherent_dma_ops.patch b/target/linux/mvebu/patches-3.18/025-ARM-mvebu-Use-arm_coherent_dma_ops.patch deleted file mode 100644 index e3d1415ede..0000000000 --- a/target/linux/mvebu/patches-3.18/025-ARM-mvebu-Use-arm_coherent_dma_ops.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 1bd4d8a6de5cda605e8b99fbf081be2ea2959380 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 16 Jan 2015 17:11:29 +0100 -Subject: ARM: mvebu: use arm_coherent_dma_ops and re-enable hardware I/O - coherency - -Now that we have enabled automatic I/O synchronization barriers, we no -longer need any explicit barriers. We can therefore simplify -arch/arm/mach-mvebu/coherency.c by using the existing -arm_coherent_dma_ops instead of our custom mvebu_hwcc_dma_ops, and -re-enable hardware I/O coherency support. - -Signed-off-by: Thomas Petazzoni -[Andrew Lunn : Remove forgotten comment] -Signed-off-by: Andrew Lunn - ---- a/arch/arm/mach-mvebu/coherency.c -+++ b/arch/arm/mach-mvebu/coherency.c -@@ -33,6 +33,7 @@ - #include - #include - #include -+#include - #include "armada-370-xp.h" - #include "coherency.h" - #include "mvebu-soc-id.h" -@@ -223,59 +224,6 @@ static void __init armada_375_coherency_ - coherency_wa_enabled = true; - } - --static inline void mvebu_hwcc_sync_io_barrier(void) --{ -- if (coherency_wa_enabled) { -- mvebu_hwcc_armada375_sync_io_barrier_wa(); -- return; -- } -- -- writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); -- while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); --} -- --static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page, -- unsigned long offset, size_t size, -- enum dma_data_direction dir, -- struct dma_attrs *attrs) --{ -- if (dir != DMA_TO_DEVICE) -- mvebu_hwcc_sync_io_barrier(); -- return pfn_to_dma(dev, page_to_pfn(page)) + offset; --} -- -- --static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle, -- size_t size, enum dma_data_direction dir, -- struct dma_attrs *attrs) --{ -- if (dir != DMA_TO_DEVICE) -- mvebu_hwcc_sync_io_barrier(); --} -- --static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle, -- size_t size, enum dma_data_direction dir) --{ -- if (dir != DMA_TO_DEVICE) -- mvebu_hwcc_sync_io_barrier(); --} -- --static struct dma_map_ops mvebu_hwcc_dma_ops = { -- .alloc = arm_dma_alloc, -- .free = arm_dma_free, -- .mmap = arm_dma_mmap, -- .map_page = mvebu_hwcc_dma_map_page, -- .unmap_page = mvebu_hwcc_dma_unmap_page, -- .get_sgtable = arm_dma_get_sgtable, -- .map_sg = arm_dma_map_sg, -- .unmap_sg = arm_dma_unmap_sg, -- .sync_single_for_cpu = mvebu_hwcc_dma_sync, -- .sync_single_for_device = mvebu_hwcc_dma_sync, -- .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, -- .sync_sg_for_device = arm_dma_sync_sg_for_device, -- .set_dma_mask = arm_dma_set_mask, --}; -- - static int mvebu_hwcc_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) - { -@@ -283,7 +231,7 @@ static int mvebu_hwcc_notifier(struct no - - if (event != BUS_NOTIFY_ADD_DEVICE) - return NOTIFY_DONE; -- set_dma_ops(dev, &mvebu_hwcc_dma_ops); -+ set_dma_ops(dev, &arm_coherent_dma_ops); - - return NOTIFY_OK; - } -@@ -405,14 +353,9 @@ static int coherency_type(void) - return type; - } - --/* -- * As a precaution, we currently completely disable hardware I/O -- * coherency, until enough testing is done with automatic I/O -- * synchronization barriers to validate that it is a proper solution. -- */ - int coherency_available(void) - { -- return false; -+ return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; - } - - int __init coherency_init(void) diff --git a/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch deleted file mode 100644 index e55eca3e04..0000000000 --- a/target/linux/mvebu/patches-3.18/050-leds_tlc59116_document_binding.patch +++ /dev/null @@ -1,51 +0,0 @@ -Document the binding for the TLC59116 LED driver. - -Signed-off-by: Andrew Lunn ---- - .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt -@@ -0,0 +1,40 @@ -+LEDs connected to tcl59116 -+ -+Required properties -+- compatible: should be "ti,tlc59116" -+- #address-cells: must be 1 -+- #size-cells: must be 0 -+- reg: typically 0x68 -+ -+Each led is represented as a sub-node of the ti,,tlc59116. -+See Documentation/devicetree/bindings/leds/common.txt -+ -+LED sub-node properties: -+- reg: number of LED line, 0 to 15 -+- label: (optional) name of LED -+- linux,default-trigger : (optional) -+ -+Examples: -+ -+tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan@0 { -+ label = "wrt1900ac:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ 2g@2 { -+ label = "wrt1900ac:white:2g"; -+ reg = <0x2>; -+ }; -+ -+ alive@9 { -+ label = "wrt1900ac:green:alive"; -+ reg = <0x9>; -+ linux,default_trigger = "heartbeat"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch deleted file mode 100644 index fd22aef580..0000000000 --- a/target/linux/mvebu/patches-3.18/051-leds_tlc59116_add_driver.patch +++ /dev/null @@ -1,297 +0,0 @@ -The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED -output has its own 8-bit fixed-frequency PWM controller to control the -brightness of the LED. - -This is based on a driver from Belkin, but has been extensively -rewritten. - -Signed-off-by: Andrew Lunn ---- - drivers/leds/Kconfig | 8 ++ - drivers/leds/Makefile | 1 + - drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 261 insertions(+) - create mode 100644 drivers/leds/leds-tlc59116.c - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -446,6 +446,14 @@ config LEDS_TCA6507 - LED driver chips accessed via the I2C bus. - Driver support brightness control and hardware-assisted blinking. - -+config LEDS_TLC59116 -+ tristate "LED driver for TLC59116F controllers" -+ depends on LEDS_CLASS && I2C -+ select REGMAP_I2C -+ help -+ This option enables support for Texas Instruments TLC59116F -+ LED controller. -+ - config LEDS_MAX8997 - tristate "LED support for MAX8997 PMIC" - depends on LEDS_CLASS && MFD_MAX8997 ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_LP5562) += leds-lp556 - obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o - obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o - obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o -+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o - obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o - obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o ---- /dev/null -+++ b/drivers/leds/leds-tlc59116.c -@@ -0,0 +1,252 @@ -+/* -+ * Copyright 2014 Belkin Inc. -+ * Copyright 2014 Andrew Lunn -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TLC59116_LEDS 16 -+ -+#define TLC59116_REG_MODE1 0x00 -+#define MODE1_RESPON_ADDR_MASK 0xF0 -+#define MODE1_NORMAL_MODE (0 << 4) -+#define MODE1_SPEED_MODE (1 << 4) -+ -+#define TLC59116_REG_MODE2 0x01 -+#define MODE2_DIM (0 << 5) -+#define MODE2_BLINK (1 << 5) -+#define MODE2_OCH_STOP (0 << 3) -+#define MODE2_OCH_ACK (1 << 3) -+ -+#define TLC59116_REG_PWM(x) (0x02 + (x)) -+ -+#define TLC59116_REG_GRPPWM 0x12 -+#define TLC59116_REG_GRPFREQ 0x13 -+ -+/* LED Driver Output State, determine the source that drives LED outputs */ -+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2)) -+#define TLC59116_LED_OFF 0x0 /* Output LOW */ -+#define TLC59116_LED_ON 0x1 /* Output HI-Z */ -+#define TLC59116_DIM 0x2 /* Dimming */ -+#define TLC59116_BLINK 0x3 /* Blinking */ -+#define LED_MASK 0x3 -+ -+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev) -+#define work_to_led(work) container_of(work, struct tlc59116_led, work) -+ -+struct tlc59116_led { -+ bool active; -+ struct regmap *regmap; -+ unsigned int led_no; -+ struct led_classdev ldev; -+ struct work_struct work; -+}; -+ -+struct tlc59116_priv { -+ struct tlc59116_led leds[TLC59116_LEDS]; -+}; -+ -+static int -+tlc59116_set_mode(struct regmap *regmap, u8 mode) -+{ -+ int err; -+ u8 val; -+ -+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK)) -+ mode = MODE2_DIM; -+ -+ /* Configure MODE1 register */ -+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE); -+ if (err) -+ return err; -+ -+ /* Configure MODE2 Reg */ -+ val = MODE2_OCH_STOP | mode; -+ -+ return regmap_write(regmap, TLC59116_REG_MODE2, val); -+} -+ -+static int -+tlc59116_set_led(struct tlc59116_led *led, u8 val) -+{ -+ struct regmap *regmap = led->regmap; -+ unsigned int i = (led->led_no % 4) * 2; -+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no); -+ unsigned int mask = LED_MASK << i; -+ -+ val = val << i; -+ -+ return regmap_update_bits(regmap, addr, mask, val); -+} -+ -+static void -+tlc59116_led_work(struct work_struct *work) -+{ -+ struct tlc59116_led *led = work_to_led(work); -+ struct regmap *regmap = led->regmap; -+ int err; -+ u8 pwm; -+ -+ pwm = TLC59116_REG_PWM(led->led_no); -+ err = regmap_write(regmap, pwm, led->ldev.brightness); -+ if (err) -+ dev_err(led->ldev.dev, "Failed setting brightness\n"); -+} -+ -+static void -+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ struct tlc59116_led *led = ldev_to_led(led_cdev); -+ -+ led->ldev.brightness = value; -+ schedule_work(&led->work); -+} -+ -+static void -+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i) -+{ -+ while (--i >= 0) { -+ if (priv->leds[i].active) { -+ led_classdev_unregister(&priv->leds[i].ldev); -+ cancel_work_sync(&priv->leds[i].work); -+ } -+ } -+} -+ -+static int -+tlc59116_configure(struct device *dev, -+ struct tlc59116_priv *priv, -+ struct regmap *regmap) -+{ -+ unsigned int i; -+ int err = 0; -+ -+ tlc59116_set_mode(regmap, MODE2_DIM); -+ for (i = 0; i < TLC59116_LEDS; i++) { -+ struct tlc59116_led *led = &priv->leds[i]; -+ -+ if (!led->active) -+ continue; -+ -+ led->regmap = regmap; -+ led->led_no = i; -+ led->ldev.brightness_set = tlc59116_led_set; -+ led->ldev.max_brightness = LED_FULL; -+ INIT_WORK(&led->work, tlc59116_led_work); -+ err = led_classdev_register(dev, &led->ldev); -+ if (err < 0) { -+ dev_err(dev, "couldn't register LED %s\n", -+ led->ldev.name); -+ goto exit; -+ } -+ tlc59116_set_led(led, TLC59116_DIM); -+ } -+ -+ return 0; -+ -+exit: -+ tlc59116_destroy_devices(priv, i); -+ return err; -+} -+ -+static const struct regmap_config tlc59116_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = 0x1e, -+}; -+ -+static int -+tlc59116_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ struct device *dev = &client->dev; -+ struct device_node *np = client->dev.of_node, *child; -+ struct regmap *regmap; -+ int err, count, reg; -+ -+ count = of_get_child_count(np); -+ if (!count || count > TLC59116_LEDS) -+ return -EINVAL; -+ -+ if (!i2c_check_functionality(client->adapter, -+ I2C_FUNC_SMBUS_BYTE_DATA)) -+ return -EIO; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap); -+ if (IS_ERR(regmap)) { -+ err = PTR_ERR(regmap); -+ dev_err(dev, "Failed to allocate register map: %d\n", err); -+ return err; -+ } -+ -+ i2c_set_clientdata(client, priv); -+ -+ for_each_child_of_node(np, child) { -+ err = of_property_read_u32(child, "reg", ®); -+ if (err) -+ return err; -+ if (reg < 0 || reg >= TLC59116_LEDS) -+ return -EINVAL; -+ if (priv->leds[reg].active) -+ return -EINVAL; -+ priv->leds[reg].active = true; -+ priv->leds[reg].ldev.name = -+ of_get_property(child, "label", NULL) ? : child->name; -+ priv->leds[reg].ldev.default_trigger = -+ of_get_property(child, "linux,default-trigger", NULL); -+ } -+ return tlc59116_configure(dev, priv, regmap); -+} -+ -+static int -+tlc59116_remove(struct i2c_client *client) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ -+ tlc59116_destroy_devices(priv, TLC59116_LEDS); -+ -+ return 0; -+} -+ -+static const struct of_device_id of_tlc59116_leds_match[] = { -+ { .compatible = "ti,tlc59116", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match); -+ -+static const struct i2c_device_id tlc59116_id[] = { -+ { "tlc59116" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(i2c, tlc59116_id); -+ -+static struct i2c_driver tlc59116_driver = { -+ .driver = { -+ .name = "tlc59116", -+ .of_match_table = of_match_ptr(of_tlc59116_leds_match), -+ }, -+ .probe = tlc59116_probe, -+ .remove = tlc59116_remove, -+ .id_table = tlc59116_id, -+}; -+ -+module_i2c_driver(tlc59116_driver); -+ -+MODULE_AUTHOR("Andrew Lunn "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("TLC59116 LED driver"); diff --git a/target/linux/mvebu/patches-3.18/061-cpuidle-mvebu-Update-cpuidle-thresholds-for-Armada-X.patch b/target/linux/mvebu/patches-3.18/061-cpuidle-mvebu-Update-cpuidle-thresholds-for-Armada-X.patch deleted file mode 100644 index bc0f1a6f5b..0000000000 --- a/target/linux/mvebu/patches-3.18/061-cpuidle-mvebu-Update-cpuidle-thresholds-for-Armada-X.patch +++ /dev/null @@ -1,66 +0,0 @@ -From ce6031c89a35cffd5a5992b08377b77f49a004b9 Mon Sep 17 00:00:00 2001 -From: Sebastien Rannou -Date: Fri, 13 Feb 2015 15:55:03 +0100 -Subject: [PATCH] cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs - -Originally, the thresholds used in the cpuidle driver for Armada SOCs -were temporarily chosen, leaving room for improvements. - -This commit updates the thresholds for the Armada XP SOCs with values -that positively impact performances: - - without patch with patch vendor kernel - - iperf localhost (gbit/sec) ~3.7 ~6.4 ~5.4 - - ioping tmpfs (iops) ~163k ~206k ~179k - - ioping tmpfs (mib/s) ~636 ~805 ~699 - -The idle power consumption is negatively impacted (proportionally less -than the performance gain), and we are still performing better than -the vendor kernel here: - - without patch with patch vendor kernel - - power consumption idle (W) ~2.4 ~3.2 ~4.4 - - power consumption busy (W) ~8.6 ~8.3 ~8.6 - -There is still room for improvement regarding the value of these -thresholds, they were chosen to mimic the vendor kernel. - -This patch only impacts Armada XP SOCs and was tested on Online Labs -C1 boards. A similar approach can be taken to improve the performances -of the Armada 370 and Armada 38x SOCs. - -Thanks a lot to Thomas Petazzoni, Gregory Clement and Willy Tarreau -for the discussions and tips around this topic. - -Signed-off-by: Sebastien Rannou -Signed-off-by: Daniel Lezcano -Acked-by: Gregory CLEMENT ---- - drivers/cpuidle/cpuidle-mvebu-v7.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/cpuidle/cpuidle-mvebu-v7.c -+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c -@@ -50,18 +50,18 @@ static struct cpuidle_driver armadaxp_id - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { - .enter = mvebu_v7_enter_idle, -- .exit_latency = 10, -+ .exit_latency = 100, - .power_usage = 50, -- .target_residency = 100, -+ .target_residency = 1000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "MV CPU IDLE", - .desc = "CPU power down", - }, - .states[2] = { - .enter = mvebu_v7_enter_idle, -- .exit_latency = 100, -+ .exit_latency = 1000, - .power_usage = 5, -- .target_residency = 1000, -+ .target_residency = 10000, - .flags = CPUIDLE_FLAG_TIME_VALID | - MVEBU_V7_FLAG_DEEP_IDLE, - .name = "MV CPU DEEP IDLE", diff --git a/target/linux/mvebu/patches-3.18/099-build_linksys_a385_dts.patch b/target/linux/mvebu/patches-3.18/099-build_linksys_a385_dts.patch deleted file mode 100644 index efdd94c5ed..0000000000 --- a/target/linux/mvebu/patches-3.18/099-build_linksys_a385_dts.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -501,6 +501,9 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ - armada-385-db-ap.dtb \ -+ armada-385-linksys-caiman.dtb \ -+ armada-385-linksys-cobra.dtb \ -+ armada-385-linksys-shelby.dtb \ - armada-385-rd.dtb - dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-axpwifiap.dtb \ diff --git a/target/linux/mvebu/patches-3.18/100-find_active_root.patch b/target/linux/mvebu/patches-3.18/100-find_active_root.patch deleted file mode 100644 index e32b6089d1..0000000000 --- a/target/linux/mvebu/patches-3.18/100-find_active_root.patch +++ /dev/null @@ -1,61 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz - ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_ofpart_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct device_node *node; - const char *partname; -+ const char *owrtpart = "ubi"; - struct device_node *pp; - int nr_parts, i; - -@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc - (*pparts)[i].offset = of_read_number(reg, a_cells); - (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - (*pparts)[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-3.18/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.18/102-revert_i2c_delay.patch deleted file mode 100644 index 9089534ac5..0000000000 --- a/target/linux/mvebu/patches-3.18/102-revert_i2c_delay.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -49,12 +49,10 @@ - }; - - i2c0: i2c@11000 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - diff --git a/target/linux/mvebu/patches-3.18/140-alias_mdio_node.patch b/target/linux/mvebu/patches-3.18/140-alias_mdio_node.patch deleted file mode 100644 index 818fae74e6..0000000000 --- a/target/linux/mvebu/patches-3.18/140-alias_mdio_node.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -236,7 +236,7 @@ - status = "disabled"; - }; - -- mdio { -+ mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; diff --git a/target/linux/mvebu/patches-3.18/150-use_the_cpufreq-dt_platform_data_for_independent_clocks.patch b/target/linux/mvebu/patches-3.18/150-use_the_cpufreq-dt_platform_data_for_independent_clocks.patch deleted file mode 100644 index 1fea44f8e8..0000000000 --- a/target/linux/mvebu/patches-3.18/150-use_the_cpufreq-dt_platform_data_for_independent_clocks.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 842f7d2c4d392c0571cf72e3eaca26742bebbd1e Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 2 Dec 2014 17:48:02 +0100 -Subject: ARM: mvebu: use the cpufreq-dt platform_data for independent clocks - -This commit adjusts the registration of the cpufreq-dt driver in the -mvebu platform to indicate to the cpufreq driver that the platform has -independent clocks for each CPU. - -Signed-off-by: Thomas Petazzoni -Acked-by: Jason Cooper -Signed-off-by: Arnd Bergmann - ---- a/arch/arm/mach-mvebu/pmsu.c -+++ b/arch/arm/mach-mvebu/pmsu.c -@@ -20,6 +20,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -586,6 +587,10 @@ int mvebu_pmsu_dfs_request(int cpu) - return 0; - } - -+struct cpufreq_dt_platform_data cpufreq_dt_pd = { -+ .independent_clocks = true, -+}; -+ - static int __init armada_xp_pmsu_cpufreq_init(void) - { - struct device_node *np; -@@ -658,7 +663,8 @@ static int __init armada_xp_pmsu_cpufreq - } - } - -- platform_device_register_simple("cpufreq-dt", -1, NULL, 0); -+ platform_device_register_data(NULL, "cpufreq-dt", -1, -+ &cpufreq_dt_pd, sizeof(cpufreq_dt_pd)); - return 0; - } - diff --git a/target/linux/mvebu/patches-3.18/198-gpio_mvebu_suspend.patch b/target/linux/mvebu/patches-3.18/198-gpio_mvebu_suspend.patch deleted file mode 100644 index 9ef1815035..0000000000 --- a/target/linux/mvebu/patches-3.18/198-gpio_mvebu_suspend.patch +++ /dev/null @@ -1,137 +0,0 @@ -This commit adds the implementation of ->suspend() and ->resume() -platform_driver hooks in order to save and restore the state of the -GPIO configuration. In order to achieve that, additional fields are -added to the mvebu_gpio_chip structure. - -Signed-off-by: Thomas Petazzoni -Acked-by: Alexandre Courbot -Signed-off-by: Linus Walleij - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -83,6 +83,14 @@ struct mvebu_gpio_chip { - int irqbase; - struct irq_domain *domain; - int soc_variant; -+ -+ /* Used to preserve GPIO registers accross suspend/resume */ -+ u32 out_reg; -+ u32 io_conf_reg; -+ u32 blink_en_reg; -+ u32 in_pol_reg; -+ u32 edge_mask_regs[4]; -+ u32 level_mask_regs[4]; - }; - - /* -@@ -562,6 +570,93 @@ static const struct of_device_id mvebu_g - }; - MODULE_DEVICE_TABLE(of, mvebu_gpio_of_match); - -+static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev); -+ int i; -+ -+ mvchip->out_reg = readl(mvebu_gpioreg_out(mvchip)); -+ mvchip->io_conf_reg = readl(mvebu_gpioreg_io_conf(mvchip)); -+ mvchip->blink_en_reg = readl(mvebu_gpioreg_blink(mvchip)); -+ mvchip->in_pol_reg = readl(mvebu_gpioreg_in_pol(mvchip)); -+ -+ switch (mvchip->soc_variant) { -+ case MVEBU_GPIO_SOC_VARIANT_ORION: -+ mvchip->edge_mask_regs[0] = -+ readl(mvchip->membase + GPIO_EDGE_MASK_OFF); -+ mvchip->level_mask_regs[0] = -+ readl(mvchip->membase + GPIO_LEVEL_MASK_OFF); -+ break; -+ case MVEBU_GPIO_SOC_VARIANT_MV78200: -+ for (i = 0; i < 2; i++) { -+ mvchip->edge_mask_regs[i] = -+ readl(mvchip->membase + -+ GPIO_EDGE_MASK_MV78200_OFF(i)); -+ mvchip->level_mask_regs[i] = -+ readl(mvchip->membase + -+ GPIO_LEVEL_MASK_MV78200_OFF(i)); -+ } -+ break; -+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: -+ for (i = 0; i < 4; i++) { -+ mvchip->edge_mask_regs[i] = -+ readl(mvchip->membase + -+ GPIO_EDGE_MASK_ARMADAXP_OFF(i)); -+ mvchip->level_mask_regs[i] = -+ readl(mvchip->membase + -+ GPIO_LEVEL_MASK_ARMADAXP_OFF(i)); -+ } -+ break; -+ default: -+ BUG(); -+ } -+ -+ return 0; -+} -+ -+static int mvebu_gpio_resume(struct platform_device *pdev) -+{ -+ struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev); -+ int i; -+ -+ writel(mvchip->out_reg, mvebu_gpioreg_out(mvchip)); -+ writel(mvchip->io_conf_reg, mvebu_gpioreg_io_conf(mvchip)); -+ writel(mvchip->blink_en_reg, mvebu_gpioreg_blink(mvchip)); -+ writel(mvchip->in_pol_reg, mvebu_gpioreg_in_pol(mvchip)); -+ -+ switch (mvchip->soc_variant) { -+ case MVEBU_GPIO_SOC_VARIANT_ORION: -+ writel(mvchip->edge_mask_regs[0], -+ mvchip->membase + GPIO_EDGE_MASK_OFF); -+ writel(mvchip->level_mask_regs[0], -+ mvchip->membase + GPIO_LEVEL_MASK_OFF); -+ break; -+ case MVEBU_GPIO_SOC_VARIANT_MV78200: -+ for (i = 0; i < 2; i++) { -+ writel(mvchip->edge_mask_regs[i], -+ mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(i)); -+ writel(mvchip->level_mask_regs[i], -+ mvchip->membase + -+ GPIO_LEVEL_MASK_MV78200_OFF(i)); -+ } -+ break; -+ case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: -+ for (i = 0; i < 4; i++) { -+ writel(mvchip->edge_mask_regs[i], -+ mvchip->membase + -+ GPIO_EDGE_MASK_ARMADAXP_OFF(i)); -+ writel(mvchip->level_mask_regs[i], -+ mvchip->membase + -+ GPIO_LEVEL_MASK_ARMADAXP_OFF(i)); -+ } -+ break; -+ default: -+ BUG(); -+ } -+ -+ return 0; -+} -+ - static int mvebu_gpio_probe(struct platform_device *pdev) - { - struct mvebu_gpio_chip *mvchip; -@@ -585,6 +680,8 @@ static int mvebu_gpio_probe(struct platf - if (!mvchip) - return -ENOMEM; - -+ platform_set_drvdata(pdev, mvchip); -+ - if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) { - dev_err(&pdev->dev, "Missing ngpios OF property\n"); - return -ENODEV; -@@ -743,5 +840,7 @@ static struct platform_driver mvebu_gpio - .of_match_table = mvebu_gpio_of_match, - }, - .probe = mvebu_gpio_probe, -+ .suspend = mvebu_gpio_suspend, -+ .resume = mvebu_gpio_resume, - }; - module_platform_driver(mvebu_gpio_driver); diff --git a/target/linux/mvebu/patches-3.18/199-gpio_mvebu_drop_owner.patch b/target/linux/mvebu/patches-3.18/199-gpio_mvebu_drop_owner.patch deleted file mode 100644 index fe74199dcc..0000000000 --- a/target/linux/mvebu/patches-3.18/199-gpio_mvebu_drop_owner.patch +++ /dev/null @@ -1,15 +0,0 @@ -A platform_driver does not need to set an owner, it will be populated by the -driver core. - -Signed-off-by: Wolfram Sang - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -836,7 +836,6 @@ static int mvebu_gpio_probe(struct platf - static struct platform_driver mvebu_gpio_driver = { - .driver = { - .name = "mvebu-gpio", -- .owner = THIS_MODULE, - .of_match_table = mvebu_gpio_of_match, - }, - .probe = mvebu_gpio_probe, diff --git a/target/linux/mvebu/patches-3.18/200-gpio_mvebu_checkpatch_fixes.patch b/target/linux/mvebu/patches-3.18/200-gpio_mvebu_checkpatch_fixes.patch deleted file mode 100644 index 48ab67df3f..0000000000 --- a/target/linux/mvebu/patches-3.18/200-gpio_mvebu_checkpatch_fixes.patch +++ /dev/null @@ -1,223 +0,0 @@ -Wrap some long lines. -Prefer seq_puts() over seq_printf(). -space to tab conversions. -Spelling error fix. - -Signed-off-by: Andrew Lunn ---- - drivers/gpio/gpio-mvebu.c | 77 ++++++++++++++++++++++++++--------------------- - 1 file changed, 42 insertions(+), 35 deletions(-) - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -59,7 +59,7 @@ - #define GPIO_LEVEL_MASK_OFF 0x001c - - /* The MV78200 has per-CPU registers for edge mask and level mask */ --#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) -+#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) - #define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C) - - /* The Armada XP has per-CPU registers for interrupt cause, interrupt -@@ -69,11 +69,11 @@ - #define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4) - #define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4) - --#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 --#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 -+#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 -+#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 - #define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3 - --#define MVEBU_MAX_GPIO_PER_BANK 32 -+#define MVEBU_MAX_GPIO_PER_BANK 32 - - struct mvebu_gpio_chip { - struct gpio_chip chip; -@@ -82,9 +82,9 @@ struct mvebu_gpio_chip { - void __iomem *percpu_membase; - int irqbase; - struct irq_domain *domain; -- int soc_variant; -+ int soc_variant; - -- /* Used to preserve GPIO registers accross suspend/resume */ -+ /* Used to preserve GPIO registers across suspend/resume */ - u32 out_reg; - u32 io_conf_reg; - u32 blink_en_reg; -@@ -107,7 +107,8 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_BLINK_EN_OFF; - } - --static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) - { - return mvchip->membase + GPIO_IO_CONF_OFF; - } -@@ -117,12 +118,14 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_IN_POL_OFF; - } - --static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) - { - return mvchip->membase + GPIO_DATA_IN_OFF; - } - --static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) - { - int cpu; - -@@ -132,13 +135,15 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_EDGE_CAUSE_OFF; - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); - default: - BUG(); - } - } - --static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) - { - int cpu; - -@@ -150,7 +155,8 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu); - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); - default: - BUG(); - } -@@ -168,7 +174,8 @@ static void __iomem *mvebu_gpioreg_level - return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu); - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); - default: - BUG(); - } -@@ -372,22 +379,22 @@ static void mvebu_gpio_level_irq_unmask( - * value of the line or the opposite value. - * - * Level IRQ handlers: DATA_IN is used directly as cause register. -- * Interrupt are masked by LEVEL_MASK registers. -+ * Interrupt are masked by LEVEL_MASK registers. - * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. -- * Interrupt are masked by EDGE_MASK registers. -+ * Interrupt are masked by EDGE_MASK registers. - * Both-edge handlers: Similar to regular Edge handlers, but also swaps -- * the polarity to catch the next line transaction. -- * This is a race condition that might not perfectly -- * work on some use cases. -+ * the polarity to catch the next line transaction. -+ * This is a race condition that might not perfectly -+ * work on some use cases. - * - * Every eight GPIO lines are grouped (OR'ed) before going up to main - * cause register. - * -- * EDGE cause mask -- * data-in /--------| |-----| |----\ -- * -----| |----- ---- to main cause reg -- * X \----------------| |----/ -- * polarity LEVEL mask -+ * EDGE cause mask -+ * data-in /--------| |-----| |----\ -+ * -----| |----- ---- to main cause reg -+ * X \----------------| |----/ -+ * polarity LEVEL mask - * - ****************************************************************************/ - -@@ -402,9 +409,8 @@ static int mvebu_gpio_irq_set_type(struc - pin = d->hwirq; - - u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin); -- if (!u) { -+ if (!u) - return -EINVAL; -- } - - type &= IRQ_TYPE_SENSE_MASK; - if (type == IRQ_TYPE_NONE) -@@ -537,13 +543,13 @@ static void mvebu_gpio_dbg_show(struct s - (data_in ^ in_pol) & msk ? "hi" : "lo", - in_pol & msk ? "lo" : "hi"); - if (!((edg_msk | lvl_msk) & msk)) { -- seq_printf(s, " disabled\n"); -+ seq_puts(s, " disabled\n"); - continue; - } - if (edg_msk & msk) -- seq_printf(s, " edge "); -+ seq_puts(s, " edge "); - if (lvl_msk & msk) -- seq_printf(s, " level"); -+ seq_puts(s, " level"); - seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); - } - } -@@ -554,15 +560,15 @@ static void mvebu_gpio_dbg_show(struct s - static const struct of_device_id mvebu_gpio_of_match[] = { - { - .compatible = "marvell,orion-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, - }, - { - .compatible = "marvell,mv78200-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, - }, - { - .compatible = "marvell,armadaxp-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, - }, - { - /* sentinel */ -@@ -676,7 +682,8 @@ static int mvebu_gpio_probe(struct platf - else - soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; - -- mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); -+ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), -+ GFP_KERNEL); - if (!mvchip) - return -ENOMEM; - -@@ -775,8 +782,8 @@ static int mvebu_gpio_probe(struct platf - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - for (i = 0; i < 4; i++) { -- int irq; -- irq = platform_get_irq(pdev, i); -+ int irq = platform_get_irq(pdev, i); -+ - if (irq < 0) - continue; - irq_set_handler_data(irq, mvchip); -@@ -835,7 +842,7 @@ static int mvebu_gpio_probe(struct platf - - static struct platform_driver mvebu_gpio_driver = { - .driver = { -- .name = "mvebu-gpio", -+ .name = "mvebu-gpio", - .of_match_table = mvebu_gpio_of_match, - }, - .probe = mvebu_gpio_probe, diff --git a/target/linux/mvebu/patches-3.18/201-gpio_mvebu_fix_probe_cleanup_on_error.patch b/target/linux/mvebu/patches-3.18/201-gpio_mvebu_fix_probe_cleanup_on_error.patch deleted file mode 100644 index aeb884a381..0000000000 --- a/target/linux/mvebu/patches-3.18/201-gpio_mvebu_fix_probe_cleanup_on_error.patch +++ /dev/null @@ -1,63 +0,0 @@ -Ensure that when there is an error during probe that the gpiochip is -removed and the generic irq chip is removed. - -Signed-off-by: Andrew Lunn ---- - drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++------ - 1 file changed, 17 insertions(+), 6 deletions(-) - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -675,6 +675,7 @@ static int mvebu_gpio_probe(struct platf - unsigned int ngpios; - int soc_variant; - int i, cpu, id; -+ int err; - - match = of_match_device(mvebu_gpio_of_match, &pdev->dev); - if (match) -@@ -793,14 +794,16 @@ static int mvebu_gpio_probe(struct platf - mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); - if (mvchip->irqbase < 0) { - dev_err(&pdev->dev, "no irqs\n"); -- return mvchip->irqbase; -+ err = mvchip->irqbase; -+ goto err_gpiochip_add; - } - - gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, - mvchip->membase, handle_level_irq); - if (!gc) { - dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); -- return -ENOMEM; -+ err = -ENOMEM; -+ goto err_gpiochip_add; - } - - gc->private = mvchip; -@@ -831,13 +834,21 @@ static int mvebu_gpio_probe(struct platf - if (!mvchip->domain) { - dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", - mvchip->chip.label); -- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, -- IRQ_LEVEL | IRQ_NOPROBE); -- kfree(gc); -- return -ENODEV; -+ err = -ENODEV; -+ goto err_generic_chip; - } - - return 0; -+ -+err_generic_chip: -+ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, -+ IRQ_LEVEL | IRQ_NOPROBE); -+ kfree(gc); -+ -+err_gpiochip_add: -+ gpiochip_remove(&mvchip->chip); -+ -+ return err; - } - - static struct platform_driver mvebu_gpio_driver = { diff --git a/target/linux/mvebu/patches-3.18/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-3.18/202-gpio_mvebu_add_limited_pwm_support.patch deleted file mode 100644 index 49a8c0aec1..0000000000 --- a/target/linux/mvebu/patches-3.18/202-gpio_mvebu_add_limited_pwm_support.patch +++ /dev/null @@ -1,433 +0,0 @@ -Armada 370/XP devices can 'blink' gpio lines with a configurable on -and off period. This can be modelled as a PWM. - -However, there are only two sets of PWM configuration registers for -all the gpio lines. This driver simply allows a single gpio line per -gpio chip of 32 lines to be used as a PWM. Attempts to use more return -EBUSY. - -Due to the interleaving of registers it is not simple to separate the -PWM driver from the gpio driver. Thus the gpio driver has been -extended with a PWM driver. - -Signed-off-by: Andrew Lunn ---- - drivers/gpio/Kconfig | 5 ++ - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpio-mvebu.c | 37 +++----- - drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++ - 5 files changed, 299 insertions(+), 25 deletions(-) - create mode 100644 drivers/gpio/gpio-mvebu-pwm.c - create mode 100644 drivers/gpio/gpio-mvebu.h - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -223,6 +223,11 @@ config GPIO_MVEBU - select GPIO_GENERIC - select GENERIC_IRQ_CHIP - -+config GPIO_MVEBU_PWM -+ def_bool y -+ depends on GPIO_MVEBU -+ depends on PWM -+ - config GPIO_MXC - def_bool y - depends on ARCH_MXC ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -58,6 +58,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o - obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o - obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o -+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o - obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu-pwm.c -@@ -0,0 +1,202 @@ -+#include "asm/io.h" -+#include -+#include -+#include -+#include -+#include -+#include -+#include "gpio-mvebu.h" -+#include "gpiolib.h" -+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip) -+{ -+ return mvchip->membase + GPIO_BLINK_CNT_SELECT; -+} -+ -+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct mvebu_pwm, chip); -+} -+ -+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm) -+{ -+ return container_of(pwm, struct mvebu_gpio_chip, pwm); -+} -+ -+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ int ret = 0; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ if (pwm->used) { -+ ret = -EBUSY; -+ } else { -+ if (!desc) { -+ ret = -ENODEV; -+ goto out; -+ } -+ ret = gpiod_request(desc, "mvebu-pwm"); -+ if (ret) -+ goto out; -+ -+ ret = gpiod_direction_output(desc, 0); -+ if (ret) { -+ gpiod_free(desc); -+ goto out; -+ } -+ -+ pwm->pin = pwmd->pwm - mvchip->chip.base; -+ pwm->used = true; -+ } -+ -+out: -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return ret; -+} -+ -+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ gpiod_free(desc); -+ pwm->used = false; -+ spin_unlock_irqrestore(&pwm->lock, flags); -+} -+ -+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd, -+ int duty_ns, int period_ns) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ unsigned int on, off; -+ unsigned long long val; -+ u32 u; -+ -+ val = (unsigned long long) pwm->clk_rate * duty_ns; -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ on = val; -+ else -+ on = 1; -+ -+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns); -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ off = val; -+ else -+ off = 1; -+ -+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ u &= ~(1 << pwm->pin); -+ u |= (pwm->id << pwm->pin); -+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip)); -+ -+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION); -+ -+ return 0; -+} -+ -+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1); -+ -+ return 0; -+} -+ -+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0); -+} -+ -+static const struct pwm_ops mvebu_pwm_ops = { -+ .request = mvebu_pwm_request, -+ .free = mvebu_pwm_free, -+ .config = mvebu_pwm_config, -+ .enable = mvebu_pwm_enable, -+ .disable = mvebu_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ pwm->blink_on_duration = -+ readl_relaxed(pwm->membase + BLINK_ON_DURATION); -+ pwm->blink_off_duration = -+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION); -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip)); -+ writel_relaxed(pwm->blink_on_duration, -+ pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(pwm->blink_off_duration, -+ pwm->membase + BLINK_OFF_DURATION); -+} -+ -+/* -+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs -+ * don't have this hardware. So if we don't have the necessary -+ * resource, it is not an error. -+ */ -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ struct device *dev = &pdev->dev; -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ struct resource *res; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); -+ if (!res) -+ return 0; -+ -+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mvchip->pwm.membase)) -+ return PTR_ERR(mvchip->percpu_membase); -+ -+ if (id < 0 || id > 1) -+ return -EINVAL; -+ pwm->id = id; -+ -+ if (IS_ERR(mvchip->clk)) -+ return PTR_ERR(mvchip->clk); -+ -+ pwm->clk_rate = clk_get_rate(mvchip->clk); -+ if (!pwm->clk_rate) { -+ dev_err(dev, "failed to get clock rate\n"); -+ return -EINVAL; -+ } -+ -+ pwm->chip.dev = dev; -+ pwm->chip.ops = &mvebu_pwm_ops; -+ pwm->chip.base = mvchip->chip.base; -+ pwm->chip.npwm = mvchip->chip.ngpio; -+ pwm->chip.can_sleep = false; -+ -+ spin_lock_init(&pwm->lock); -+ -+ return pwmchip_add(&pwm->chip); -+} ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -42,10 +42,11 @@ - #include - #include - #include -+#include - #include - #include - #include -- -+#include "gpio-mvebu.h" - /* - * GPIO unit register offsets. - */ -@@ -75,24 +76,6 @@ - - #define MVEBU_MAX_GPIO_PER_BANK 32 - --struct mvebu_gpio_chip { -- struct gpio_chip chip; -- spinlock_t lock; -- void __iomem *membase; -- void __iomem *percpu_membase; -- int irqbase; -- struct irq_domain *domain; -- int soc_variant; -- -- /* Used to preserve GPIO registers across suspend/resume */ -- u32 out_reg; -- u32 io_conf_reg; -- u32 blink_en_reg; -- u32 in_pol_reg; -- u32 edge_mask_regs[4]; -- u32 level_mask_regs[4]; --}; -- - /* - * Functions returning addresses of individual registers for a given - * GPIO controller. -@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch - return (u >> pin) & 1; - } - --static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) - { - struct mvebu_gpio_chip *mvchip = - container_of(chip, struct mvebu_gpio_chip, chip); -@@ -617,6 +600,8 @@ static int mvebu_gpio_suspend(struct pla - BUG(); - } - -+ mvebu_pwm_suspend(mvchip); -+ - return 0; - } - -@@ -660,6 +645,8 @@ static int mvebu_gpio_resume(struct plat - BUG(); - } - -+ mvebu_pwm_resume(mvchip); -+ - return 0; - } - -@@ -671,7 +658,6 @@ static int mvebu_gpio_probe(struct platf - struct resource *res; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; -- struct clk *clk; - unsigned int ngpios; - int soc_variant; - int i, cpu, id; -@@ -701,10 +687,10 @@ static int mvebu_gpio_probe(struct platf - return id; - } - -- clk = devm_clk_get(&pdev->dev, NULL); -+ mvchip->clk = devm_clk_get(&pdev->dev, NULL); - /* Not all SoCs require a clock.*/ -- if (!IS_ERR(clk)) -- clk_prepare_enable(clk); -+ if (!IS_ERR(mvchip->clk)) -+ clk_prepare_enable(mvchip->clk); - - mvchip->soc_variant = soc_variant; - mvchip->chip.label = dev_name(&pdev->dev); -@@ -838,7 +824,8 @@ static int mvebu_gpio_probe(struct platf - goto err_generic_chip; - } - -- return 0; -+ /* Armada 370/XP has simple PWM support for gpio lines */ -+ return mvebu_pwm_probe(pdev, mvchip, id); - - err_generic_chip: - irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu.h -@@ -0,0 +1,79 @@ -+/* -+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins -+ * -+ * Copyright (C) 2015, Andrew Lunn -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef MVEBU_GPIO_PWM_H -+#define MVEBU_GPIO_PWM_H -+ -+#define BLINK_ON_DURATION 0x0 -+#define BLINK_OFF_DURATION 0x4 -+#define GPIO_BLINK_CNT_SELECT 0x0020 -+ -+struct mvebu_pwm { -+ void __iomem *membase; -+ unsigned long clk_rate; -+ bool used; -+ unsigned pin; -+ struct pwm_chip chip; -+ int id; -+ spinlock_t lock; -+ -+ /* Used to preserve GPIO/PWM registers across suspend / -+ * resume */ -+ u32 blink_select; -+ u32 blink_on_duration; -+ u32 blink_off_duration; -+}; -+ -+struct mvebu_gpio_chip { -+ struct gpio_chip chip; -+ spinlock_t lock; -+ void __iomem *membase; -+ void __iomem *percpu_membase; -+ int irqbase; -+ struct irq_domain *domain; -+ int soc_variant; -+ struct clk *clk; -+#ifdef CONFIG_PWM -+ struct mvebu_pwm pwm; -+#endif -+ /* Used to preserve GPIO registers across suspend/resume */ -+ u32 out_reg; -+ u32 io_conf_reg; -+ u32 blink_en_reg; -+ u32 in_pol_reg; -+ u32 edge_mask_regs[4]; -+ u32 level_mask_regs[4]; -+}; -+ -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value); -+ -+#ifdef CONFIG_PWM -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id); -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip); -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip); -+#else -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ return 0; -+} -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+} -+#endif -+#endif diff --git a/target/linux/mvebu/patches-3.18/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-3.18/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch deleted file mode 100644 index 48f93944bf..0000000000 --- a/target/linux/mvebu/patches-3.18/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch +++ /dev/null @@ -1,52 +0,0 @@ -Document the optional parameters needed for PWM operation of gpio -lines. - -Signed-off-by: Andrew Lunn ---- - .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -@@ -38,6 +38,23 @@ Required properties: - - #gpio-cells: Should be two. The first cell is the pin number. The - second cell is reserved for flags, unused at the moment. - -+Optional properties: -+ -+In order to use the gpio lines in PWM mode, some additional optional -+properties are required. Only Armada 370 and XP supports these -+properties. -+ -+- reg: an additional register set is needed, for the GPIO Blink -+ Counter on/off registers. -+ -+- reg-names: Must contain an entry "pwm" corresponding to the -+ additional register range needed for pwm operation. -+ -+- #pwm-cells: Should be two. The first cell is the pin number. The -+ second cell is reserved for flags, unused at the moment. -+ -+- clocks: Must be a phandle to the clock for the gpio controller. -+ - Example: - - gpio0: gpio@d0018100 { -@@ -51,3 +68,17 @@ Example: - #interrupt-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; - }; -+ -+ gpio1: gpio@18140 { -+ compatible = "marvell,orion-gpio"; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; -+ ngpios = <17>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #pwm-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; -+ }; diff --git a/target/linux/mvebu/patches-3.18/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-3.18/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch deleted file mode 100644 index 9272d99072..0000000000 --- a/target/linux/mvebu/patches-3.18/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch +++ /dev/null @@ -1,149 +0,0 @@ -Add properties to the gpio nodes to allow them to be also used -as pwm lines. - -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- - 4 files changed, 30 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -109,24 +109,30 @@ - - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -169,24 +169,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -253,24 +253,28 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -291,24 +291,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { diff --git a/target/linux/mvebu/patches-3.18/205-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-3.18/205-arm_mvebu_enable_pwm_in_defconfig.patch deleted file mode 100644 index 1ff724c075..0000000000 --- a/target/linux/mvebu/patches-3.18/205-arm_mvebu_enable_pwm_in_defconfig.patch +++ /dev/null @@ -1,18 +0,0 @@ -Now that the gpio driver also supports PWM operation, enable -the PWM framework in mvebu_v7_defconfig. - -Signed-off-by: Andrew Lunn ---- - arch/arm/configs/mvebu_v7_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/configs/mvebu_v7_defconfig -+++ b/arch/arm/configs/mvebu_v7_defconfig -@@ -109,6 +109,7 @@ CONFIG_DMADEVICES=y - CONFIG_MV_XOR=y - # CONFIG_IOMMU_SUPPORT is not set - CONFIG_MEMORY=y -+CONFIG_PWM=y - CONFIG_EXT4_FS=y - CONFIG_ISO9660_FS=y - CONFIG_JOLIET=y diff --git a/target/linux/mvebu/patches-3.18/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-3.18/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch deleted file mode 100644 index 58d8280c3e..0000000000 --- a/target/linux/mvebu/patches-3.18/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch +++ /dev/null @@ -1,28 +0,0 @@ -The mvebu gpio driver can also perform PWM on some pins. Us the -pwm-fan driver to control the fan of the WRT1900AC, giving us fine -grain control over its speed and hence noise. - -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -412,13 +412,11 @@ - }; - }; - -- gpio_fan { -+ pwm_fan { - /* SUNON HA4010V4-0000-C99 */ -- compatible = "gpio-fan"; -- gpios = <&gpio0 24 0>; - -- gpio-fan,speed-map = <0 0 -- 4500 1>; -+ compatible = "pwm-fan"; -+ pwms = <&gpio0 24 4000 0>; - }; - - mvsw61xx { diff --git a/target/linux/mvebu/patches-3.18/207-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-3.18/207-armada-385-rd-mtd-partitions.patch deleted file mode 100644 index 80cec30649..0000000000 --- a/target/linux/mvebu/patches-3.18/207-armada-385-rd-mtd-partitions.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-rd.dts -+++ b/arch/arm/boot/dts/armada-385-rd.dts -@@ -42,6 +42,16 @@ - compatible = "st,m25p128"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x400000>; -+ }; -+ -+ partition@1 { -+ label = "firmware"; -+ reg = <0x400000 0xc00000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-3.18/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-3.18/208-ARM-mvebu-385-ap-Add-partitions.patch deleted file mode 100644 index 2845181104..0000000000 --- a/target/linux/mvebu/patches-3.18/208-ARM-mvebu-385-ap-Add-partitions.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 13 Jan 2015 11:14:09 +0100 -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -162,6 +162,21 @@ - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; -+ -+ mtd0@00000000 { -+ label = "u-boot"; -+ reg = <0x00000000 0x00800000>; -+ }; -+ -+ mtd1@00800000 { -+ label = "kernel"; -+ reg = <0x00800000 0x00800000>; -+ }; -+ -+ mtd2@01000000 { -+ label = "ubi"; -+ reg = <0x01000000 0x3f000000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-3.18/300-add_missing_labels.patch b/target/linux/mvebu/patches-3.18/300-add_missing_labels.patch deleted file mode 100644 index b674b56679..0000000000 --- a/target/linux/mvebu/patches-3.18/300-add_missing_labels.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -173,7 +173,7 @@ - status = "disabled"; - }; - -- serial@12000 { -+ uart0: serial@12000 { - compatible = "snps,dw-apb-uart"; - reg = <0x12000 0x100>; - reg-shift = <2>; -@@ -193,7 +193,7 @@ - status = "disabled"; - }; - -- pinctrl@18000 { -+ pinctrl: pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; - -@@ -412,7 +412,7 @@ - status = "disabled"; - }; - -- mdio@72004 { -+ mdio: mdio@72004 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; diff --git a/target/linux/mvebu/patches-3.18/600-armada_38x_rtc.patch b/target/linux/mvebu/patches-3.18/600-armada_38x_rtc.patch deleted file mode 100644 index 399421db27..0000000000 --- a/target/linux/mvebu/patches-3.18/600-armada_38x_rtc.patch +++ /dev/null @@ -1,403 +0,0 @@ ---- /dev/null -+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt -@@ -0,0 +1,22 @@ -+* Real Time Clock of the Armada 38x SoCs -+ -+RTC controller for the Armada 38x SoCs -+ -+Required properties: -+- compatible : Should be "marvell,armada-380-rtc" -+- reg: a list of base address and size pairs, one for each entry in -+ reg-names -+- reg names: should contain: -+ * "rtc" for the RTC registers -+ * "rtc-soc" for the SoC related registers and among them the one -+ related to the interrupt. -+- interrupts: IRQ line for the RTC. -+ -+Example: -+ -+rtc@a3800 { -+ compatible = "marvell,armada-380-rtc"; -+ reg = <0xa3800 0x20>, <0x184a0 0x0c>; -+ reg-names = "rtc", "rtc-soc"; -+ interrupts = ; -+}; ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -1262,6 +1262,16 @@ config RTC_DRV_MV - This driver can also be built as a module. If so, the module - will be called rtc-mv. - -+config RTC_DRV_ARMADA38X -+ tristate "Armada 38x Marvell SoC RTC" -+ depends on ARCH_MVEBU -+ help -+ If you say yes here you will get support for the in-chip RTC -+ that can be found in the Armada 38x Marvell's SoC device -+ -+ This driver can also be built as a module. If so, the module -+ will be called armada38x-rtc. -+ - config RTC_DRV_PS3 - tristate "PS3 RTC" - depends on PPC_PS3 ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-8 - obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o - obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o - obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o -+obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o - obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o - obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o - obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o ---- /dev/null -+++ b/drivers/rtc/rtc-armada38x.c -@@ -0,0 +1,320 @@ -+/* -+ * RTC driver for the Armada 38x Marvell SoCs -+ * -+ * Copyright (C) 2015 Marvell -+ * -+ * Gregory Clement -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define RTC_STATUS 0x0 -+#define RTC_STATUS_ALARM1 BIT(0) -+#define RTC_STATUS_ALARM2 BIT(1) -+#define RTC_IRQ1_CONF 0x4 -+#define RTC_IRQ1_AL_EN BIT(0) -+#define RTC_IRQ1_FREQ_EN BIT(1) -+#define RTC_IRQ1_FREQ_1HZ BIT(2) -+#define RTC_TIME 0xC -+#define RTC_ALARM1 0x10 -+ -+#define SOC_RTC_INTERRUPT 0x8 -+#define SOC_RTC_ALARM1 BIT(0) -+#define SOC_RTC_ALARM2 BIT(1) -+#define SOC_RTC_ALARM1_MASK BIT(2) -+#define SOC_RTC_ALARM2_MASK BIT(3) -+ -+struct armada38x_rtc { -+ struct rtc_device *rtc_dev; -+ void __iomem *regs; -+ void __iomem *regs_soc; -+ spinlock_t lock; -+ int irq; -+}; -+ -+/* -+ * According to the datasheet, the OS should wait 5us after every -+ * register write to the RTC hard macro so that the required update -+ * can occur without holding off the system bus -+ */ -+static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset) -+{ -+ writel(val, rtc->regs + offset); -+ udelay(5); -+} -+ -+static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long time, time_check, flags; -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ time = readl(rtc->regs + RTC_TIME); -+ /* -+ * WA for failing time set attempts. As stated in HW ERRATA if -+ * more than one second between two time reads is detected -+ * then read once again. -+ */ -+ time_check = readl(rtc->regs + RTC_TIME); -+ if ((time_check - time) > 1) -+ time_check = readl(rtc->regs + RTC_TIME); -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+ rtc_time_to_tm(time_check, tm); -+ -+ return 0; -+} -+ -+static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ int ret = 0; -+ unsigned long time, flags; -+ -+ ret = rtc_tm_to_time(tm, &time); -+ -+ if (ret) -+ goto out; -+ /* -+ * Setting the RTC time not always succeeds. According to the -+ * errata we need to first write on the status register and -+ * then wait for 100ms before writing to the time register to be -+ * sure that the data will be taken into account. -+ */ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ rtc_delayed_write(0, rtc, RTC_STATUS); -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+ msleep(100); -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ rtc_delayed_write(time, rtc, RTC_TIME); -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+out: -+ return ret; -+} -+ -+static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long time, flags; -+ u32 val; -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ time = readl(rtc->regs + RTC_ALARM1); -+ val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN; -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+ alrm->enabled = val ? 1 : 0; -+ rtc_time_to_tm(time, &alrm->time); -+ -+ return 0; -+} -+ -+static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long time, flags; -+ int ret = 0; -+ u32 val; -+ -+ ret = rtc_tm_to_time(&alrm->time, &time); -+ -+ if (ret) -+ goto out; -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ rtc_delayed_write(time, rtc, RTC_ALARM1); -+ -+ if (alrm->enabled) { -+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF); -+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT); -+ writel(val | SOC_RTC_ALARM1_MASK, -+ rtc->regs_soc + SOC_RTC_INTERRUPT); -+ } -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+out: -+ return ret; -+} -+ -+static int armada38x_rtc_alarm_irq_enable(struct device *dev, -+ unsigned int enabled) -+{ -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&rtc->lock, flags); -+ -+ if (enabled) -+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF); -+ else -+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF); -+ -+ spin_unlock_irqrestore(&rtc->lock, flags); -+ -+ return 0; -+} -+ -+static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data) -+{ -+ struct armada38x_rtc *rtc = data; -+ u32 val; -+ int event = RTC_IRQF | RTC_AF; -+ -+ dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq); -+ -+ spin_lock(&rtc->lock); -+ -+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT); -+ -+ writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT); -+ val = readl(rtc->regs + RTC_IRQ1_CONF); -+ /* disable all the interrupts for alarm 1 */ -+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF); -+ /* Ack the event */ -+ rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS); -+ -+ spin_unlock(&rtc->lock); -+ -+ if (val & RTC_IRQ1_FREQ_EN) { -+ if (val & RTC_IRQ1_FREQ_1HZ) -+ event |= RTC_UF; -+ else -+ event |= RTC_PF; -+ } -+ -+ rtc_update_irq(rtc->rtc_dev, 1, event); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct rtc_class_ops armada38x_rtc_ops = { -+ .read_time = armada38x_rtc_read_time, -+ .set_time = armada38x_rtc_set_time, -+ .read_alarm = armada38x_rtc_read_alarm, -+ .set_alarm = armada38x_rtc_set_alarm, -+ .alarm_irq_enable = armada38x_rtc_alarm_irq_enable, -+}; -+ -+static __init int armada38x_rtc_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct armada38x_rtc *rtc; -+ int ret; -+ -+ rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc), -+ GFP_KERNEL); -+ if (!rtc) -+ return -ENOMEM; -+ -+ spin_lock_init(&rtc->lock); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc"); -+ rtc->regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(rtc->regs)) -+ return PTR_ERR(rtc->regs); -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc"); -+ rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(rtc->regs_soc)) -+ return PTR_ERR(rtc->regs_soc); -+ -+ rtc->irq = platform_get_irq(pdev, 0); -+ -+ if (rtc->irq < 0) { -+ dev_err(&pdev->dev, "no irq\n"); -+ return rtc->irq; -+ } -+ if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq, -+ 0, pdev->name, rtc) < 0) { -+ dev_warn(&pdev->dev, "Interrupt not available.\n"); -+ rtc->irq = -1; -+ /* -+ * If there is no interrupt available then we can't -+ * use the alarm -+ */ -+ armada38x_rtc_ops.set_alarm = NULL; -+ armada38x_rtc_ops.alarm_irq_enable = NULL; -+ } -+ platform_set_drvdata(pdev, rtc); -+ if (rtc->irq != -1) -+ device_init_wakeup(&pdev->dev, 1); -+ -+ rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name, -+ &armada38x_rtc_ops, THIS_MODULE); -+ if (IS_ERR(rtc->rtc_dev)) { -+ ret = PTR_ERR(rtc->rtc_dev); -+ dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret); -+ return ret; -+ } -+ return 0; -+} -+ -+#ifdef CONFIG_PM_SLEEP -+static int armada38x_rtc_suspend(struct device *dev) -+{ -+ if (device_may_wakeup(dev)) { -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ -+ return enable_irq_wake(rtc->irq); -+ } -+ -+ return 0; -+} -+ -+static int armada38x_rtc_resume(struct device *dev) -+{ -+ if (device_may_wakeup(dev)) { -+ struct armada38x_rtc *rtc = dev_get_drvdata(dev); -+ -+ return disable_irq_wake(rtc->irq); -+ } -+ -+ return 0; -+} -+#endif -+ -+static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops, -+ armada38x_rtc_suspend, armada38x_rtc_resume); -+ -+#ifdef CONFIG_OF -+static const struct of_device_id armada38x_rtc_of_match_table[] = { -+ { .compatible = "marvell,armada-380-rtc", }, -+ {} -+}; -+#endif -+ -+static struct platform_driver armada38x_rtc_driver = { -+ .driver = { -+ .name = "armada38x-rtc", -+ .pm = &armada38x_rtc_pm_ops, -+ .of_match_table = of_match_ptr(armada38x_rtc_of_match_table), -+ }, -+}; -+ -+module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe); -+ -+MODULE_DESCRIPTION("Marvell Armada 38x RTC driver"); -+MODULE_AUTHOR("Gregory CLEMENT "); -+MODULE_LICENSE("GPL"); ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -1136,6 +1136,7 @@ M: Sebastian Hesselbarth ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -420,6 +420,13 @@ - clocks = <&gateclk 4>; - }; - -+ rtc@a3800 { -+ compatible = "marvell,armada-380-rtc"; -+ reg = <0xa3800 0x20>, <0x184a0 0x0c>; -+ reg-names = "rtc", "rtc-soc"; -+ interrupts = ; -+ }; -+ - sata@a8000 { - compatible = "marvell,armada-380-ahci"; - reg = <0xa8000 0x2000>; diff --git a/target/linux/mvebu/patches-3.18/700-usb_xhci_plat_phy_support.patch b/target/linux/mvebu/patches-3.18/700-usb_xhci_plat_phy_support.patch deleted file mode 100644 index 3ee9f5c990..0000000000 --- a/target/linux/mvebu/patches-3.18/700-usb_xhci_plat_phy_support.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -158,12 +159,27 @@ static int xhci_plat_probe(struct platfo - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) - xhci->shared_hcd->can_do_streams = 1; - -+ hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); -+ if (IS_ERR(hcd->usb_phy)) { -+ ret = PTR_ERR(hcd->usb_phy); -+ if (ret == -EPROBE_DEFER) -+ goto put_usb3_hcd; -+ hcd->usb_phy = NULL; -+ } else { -+ ret = usb_phy_init(hcd->usb_phy); -+ if (ret) -+ goto put_usb3_hcd; -+ } -+ - ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); - if (ret) -- goto put_usb3_hcd; -+ goto disable_usb_phy; - - return 0; - -+disable_usb_phy: -+ usb_phy_shutdown(hcd->usb_phy); -+ - put_usb3_hcd: - usb_put_hcd(xhci->shared_hcd); - -@@ -187,6 +203,7 @@ static int xhci_plat_remove(struct platf - struct clk *clk = xhci->clk; - - usb_remove_hcd(xhci->shared_hcd); -+ usb_phy_shutdown(hcd->usb_phy); - usb_put_hcd(xhci->shared_hcd); - - usb_remove_hcd(hcd); diff --git a/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch b/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch deleted file mode 100644 index 0fc2638fad..0000000000 --- a/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch +++ /dev/null @@ -1,388 +0,0 @@ -From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001 -From: Imre Kaloz -Date: Mon, 16 Feb 2015 13:31:04 +0100 -Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support - -The Linksys WRT1900AC (Mamba) is a router that has - -- 2 mini-PCIe slots with Marvell 88W8864 radios -- 1 USB 3.0 port -- 1 USB 2.0/eSATAp port -- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) -- 128MB NAND flash -- 256MB RAM - -gregory.clement@free-electrons.com: - add ARM to the title - - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - - fix the unbalanced comment for the syscfg partition - -Signed-off-by: Imre Kaloz -Acked-by: Gregory CLEMENT -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ - 2 files changed, 349 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-linksys-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -0,0 +1,348 @@ -+/* -+ * Device Tree file for the Linksys WRT1900AC (Mamba). -+ * -+ * Note: this board is shipped with a new generation boot loader that -+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk -+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be -+ * used. -+ * -+ * Copyright (C) 2014 Imre Kaloz -+ * -+ * Based on armada-xp-axpwifiap.dts: -+ * -+ * Copyright (C) 2013 Marvell -+ * -+ * Thomas Petazzoni -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include -+#include -+#include "armada-xp-mv78230.dtsi" -+ -+/ { -+ model = "Linksys WRT1900AC"; -+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", -+ "marvell,armadaxp", "marvell,armada-370-xp"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart0; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ -+ }; -+ -+ soc { -+ ranges = ; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* Etron EJ168 USB 3.0 controller */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* First mini-PCIe port */ -+ pcie@2,0 { -+ /* Port 0, Lane 1 */ -+ status = "okay"; -+ }; -+ -+ /* Second mini-PCIe port */ -+ pcie@3,0 { -+ /* Port 0, Lane 3 */ -+ status = "okay"; -+ }; -+ }; -+ -+ internal-regs { -+ -+ /* J10: VCC, NC, RX, NC, TX, GND */ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ sata@a0000 { -+ nr-ports = <1>; -+ status = "okay"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-0 = <&ge0_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ ethernet@74000 { -+ pinctrl-0 = <&ge1_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ /* USB part of the eSATA/USB 2.0 port */ -+ usb@50000 { -+ status = "okay"; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ clock-frequency = <100000>; -+ -+ tmp421@4c { -+ compatible = "ti,tmp421"; -+ reg = <0x4c>; -+ }; -+ -+ tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #gpio-cells = <2>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan_amber@0 { -+ label = "mamba:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ wan_white@1 { -+ label = "mamba:white:wan"; -+ reg = <0x1>; -+ }; -+ -+ wlan_2g@2 { -+ label = "mamba:white:wlan_2g"; -+ reg = <0x2>; -+ }; -+ -+ wlan_5g@3 { -+ label = "mamba:white:wlan_5g"; -+ reg = <0x3>; -+ }; -+ -+ esata@4 { -+ label = "mamba:white:esata"; -+ reg = <0x4>; -+ }; -+ -+ usb2@5 { -+ label = "mamba:white:usb2"; -+ reg = <0x5>; -+ }; -+ -+ usb3_1@6 { -+ label = "mamba:white:usb3_1"; -+ reg = <0x6>; -+ }; -+ -+ usb3_2@7 { -+ label = "mamba:white:usb3_2"; -+ reg = <0x7>; -+ }; -+ -+ wps_white@8 { -+ label = "mamba:white:wps"; -+ reg = <0x8>; -+ }; -+ -+ wps_amber@9 { -+ label = "mamba:amber:wps"; -+ reg = <0x9>; -+ }; -+ }; -+ }; -+ -+ nand@d0000 { -+ status = "okay"; -+ num-cs = <1>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0000000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "u_env"; -+ reg = <0x100000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@140000 { -+ label = "s_env"; -+ reg = <0x140000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@900000 { -+ label = "devinfo"; -+ reg = <0x900000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ /* kernel1 overlaps with rootfs1 by design */ -+ partition@a00000 { -+ label = "kernel1"; -+ reg = <0xa00000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@d00000 { -+ label = "rootfs1"; -+ reg = <0xd00000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* kernel2 overlaps with rootfs2 by design */ -+ partition@3200000 { -+ label = "kernel2"; -+ reg = <0x3200000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@3500000 { -+ label = "rootfs2"; -+ reg = <0x3500000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* -+ * 38MB, last MB is for the BBT, not writable -+ */ -+ partition@5a00000 { -+ label = "syscfg"; -+ reg = <0x5a00000 0x2600000>; -+ }; -+ -+ /* -+ * Unused area between "s_env" and "devinfo". -+ * Moved here because otherwise the renumbered -+ * partitions would break the bootloader -+ * supplied bootargs -+ */ -+ partition@180000 { -+ label = "unused_area"; -+ reg = <0x180000 0x780000>; /* 7.5MB */ -+ }; -+ }; -+ -+ spi0: spi@10600 { -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "everspin,mr25h256"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <40000000>; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&keys_pin>; -+ pinctrl-names = "default"; -+ -+ button@1 { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button@2 { -+ label = "Factory Reset Button"; -+ linux,code = ; -+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&power_led_pin>; -+ pinctrl-names = "default"; -+ -+ power { -+ label = "mamba:white:power"; -+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ }; -+ -+ gpio_fan { -+ /* SUNON HA4010V4-0000-C99 */ -+ compatible = "gpio-fan"; -+ gpios = <&gpio0 24 0>; -+ -+ gpio-fan,speed-map = <0 0 -+ 4500 1>; -+ }; -+}; -+ -+&pinctrl { -+ -+ keys_pin: keys-pin { -+ marvell,pins = "mpp32", "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp40"; -+ marvell,function = "gpio"; -+ }; -+ -+ gpio_fan_pin: gpio-fan-pin { -+ marvell,pins = "mpp24"; -+ marvell,function = "gpio"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch b/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch deleted file mode 100644 index 6b51e48a84..0000000000 --- a/target/linux/mvebu/patches-4.0/002-add_mamba_powertables.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -84,12 +84,100 @@ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,5ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; -+ -+ ETSI = -+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, -+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; -+ }; -+ }; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; -+ -+ mwlwifi { -+ marvell,2ghz = <0>; -+ marvell,chainmask = <4 4>; -+ marvell,powertable { -+ FCC = -+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, -+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, -+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, -+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, -+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; -+ -+ ETSI = -+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, -+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch b/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch deleted file mode 100644 index e43d164aaf..0000000000 --- a/target/linux/mvebu/patches-4.0/003-add_mamba_switch.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -415,6 +415,16 @@ - gpio-fan,speed-map = <0 0 - 4500 1>; - }; -+ -+ mvsw61xx { -+ compatible = "marvell,88e6172"; -+ status = "okay"; -+ reg = <0x10>; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ cpu-port-1 = <6>; -+ }; - }; - - &pinctrl { diff --git a/target/linux/mvebu/patches-4.0/005-build_linksys_a385_dts.patch b/target/linux/mvebu/patches-4.0/005-build_linksys_a385_dts.patch deleted file mode 100644 index 960a9fa9dd..0000000000 --- a/target/linux/mvebu/patches-4.0/005-build_linksys_a385_dts.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -621,6 +621,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - armada-375-db.dtb - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db-ap.dtb \ -+ armada-385-linksys-caiman.dtb \ -+ armada-385-linksys-cobra.dtb \ - armada-388-db.dtb \ - armada-388-gp.dtb \ - armada-388-rd.dtb diff --git a/target/linux/mvebu/patches-4.0/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch b/target/linux/mvebu/patches-4.0/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch deleted file mode 100644 index 3c4a111e4a..0000000000 --- a/target/linux/mvebu/patches-4.0/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 11 Dec 2014 14:14:58 +0100 -Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller - -The A385 AP has a 1GB NAND chip. Enable it. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -150,6 +150,19 @@ - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; -+ -+ nfc: flash@d0000 { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ num-cs = <1>; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ }; - }; - - pcie-controller { diff --git a/target/linux/mvebu/patches-4.0/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-4.0/050-leds_tlc59116_document_binding.patch deleted file mode 100644 index e55eca3e04..0000000000 --- a/target/linux/mvebu/patches-4.0/050-leds_tlc59116_document_binding.patch +++ /dev/null @@ -1,51 +0,0 @@ -Document the binding for the TLC59116 LED driver. - -Signed-off-by: Andrew Lunn ---- - .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt -@@ -0,0 +1,40 @@ -+LEDs connected to tcl59116 -+ -+Required properties -+- compatible: should be "ti,tlc59116" -+- #address-cells: must be 1 -+- #size-cells: must be 0 -+- reg: typically 0x68 -+ -+Each led is represented as a sub-node of the ti,,tlc59116. -+See Documentation/devicetree/bindings/leds/common.txt -+ -+LED sub-node properties: -+- reg: number of LED line, 0 to 15 -+- label: (optional) name of LED -+- linux,default-trigger : (optional) -+ -+Examples: -+ -+tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan@0 { -+ label = "wrt1900ac:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ 2g@2 { -+ label = "wrt1900ac:white:2g"; -+ reg = <0x2>; -+ }; -+ -+ alive@9 { -+ label = "wrt1900ac:green:alive"; -+ reg = <0x9>; -+ linux,default_trigger = "heartbeat"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-4.0/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-4.0/051-leds_tlc59116_add_driver.patch deleted file mode 100644 index 31110adf35..0000000000 --- a/target/linux/mvebu/patches-4.0/051-leds_tlc59116_add_driver.patch +++ /dev/null @@ -1,297 +0,0 @@ -The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED -output has its own 8-bit fixed-frequency PWM controller to control the -brightness of the LED. - -This is based on a driver from Belkin, but has been extensively -rewritten. - -Signed-off-by: Andrew Lunn ---- - drivers/leds/Kconfig | 8 ++ - drivers/leds/Makefile | 1 + - drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 261 insertions(+) - create mode 100644 drivers/leds/leds-tlc59116.c - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -467,6 +467,14 @@ config LEDS_TCA6507 - LED driver chips accessed via the I2C bus. - Driver support brightness control and hardware-assisted blinking. - -+config LEDS_TLC59116 -+ tristate "LED driver for TLC59116F controllers" -+ depends on LEDS_CLASS && I2C -+ select REGMAP_I2C -+ help -+ This option enables support for Texas Instruments TLC59116F -+ LED controller. -+ - config LEDS_MAX8997 - tristate "LED support for MAX8997 PMIC" - depends on LEDS_CLASS && MFD_MAX8997 ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp850 - obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o - obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o - obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o -+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o - obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o - obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o ---- /dev/null -+++ b/drivers/leds/leds-tlc59116.c -@@ -0,0 +1,252 @@ -+/* -+ * Copyright 2014 Belkin Inc. -+ * Copyright 2014 Andrew Lunn -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TLC59116_LEDS 16 -+ -+#define TLC59116_REG_MODE1 0x00 -+#define MODE1_RESPON_ADDR_MASK 0xF0 -+#define MODE1_NORMAL_MODE (0 << 4) -+#define MODE1_SPEED_MODE (1 << 4) -+ -+#define TLC59116_REG_MODE2 0x01 -+#define MODE2_DIM (0 << 5) -+#define MODE2_BLINK (1 << 5) -+#define MODE2_OCH_STOP (0 << 3) -+#define MODE2_OCH_ACK (1 << 3) -+ -+#define TLC59116_REG_PWM(x) (0x02 + (x)) -+ -+#define TLC59116_REG_GRPPWM 0x12 -+#define TLC59116_REG_GRPFREQ 0x13 -+ -+/* LED Driver Output State, determine the source that drives LED outputs */ -+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2)) -+#define TLC59116_LED_OFF 0x0 /* Output LOW */ -+#define TLC59116_LED_ON 0x1 /* Output HI-Z */ -+#define TLC59116_DIM 0x2 /* Dimming */ -+#define TLC59116_BLINK 0x3 /* Blinking */ -+#define LED_MASK 0x3 -+ -+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev) -+#define work_to_led(work) container_of(work, struct tlc59116_led, work) -+ -+struct tlc59116_led { -+ bool active; -+ struct regmap *regmap; -+ unsigned int led_no; -+ struct led_classdev ldev; -+ struct work_struct work; -+}; -+ -+struct tlc59116_priv { -+ struct tlc59116_led leds[TLC59116_LEDS]; -+}; -+ -+static int -+tlc59116_set_mode(struct regmap *regmap, u8 mode) -+{ -+ int err; -+ u8 val; -+ -+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK)) -+ mode = MODE2_DIM; -+ -+ /* Configure MODE1 register */ -+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE); -+ if (err) -+ return err; -+ -+ /* Configure MODE2 Reg */ -+ val = MODE2_OCH_STOP | mode; -+ -+ return regmap_write(regmap, TLC59116_REG_MODE2, val); -+} -+ -+static int -+tlc59116_set_led(struct tlc59116_led *led, u8 val) -+{ -+ struct regmap *regmap = led->regmap; -+ unsigned int i = (led->led_no % 4) * 2; -+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no); -+ unsigned int mask = LED_MASK << i; -+ -+ val = val << i; -+ -+ return regmap_update_bits(regmap, addr, mask, val); -+} -+ -+static void -+tlc59116_led_work(struct work_struct *work) -+{ -+ struct tlc59116_led *led = work_to_led(work); -+ struct regmap *regmap = led->regmap; -+ int err; -+ u8 pwm; -+ -+ pwm = TLC59116_REG_PWM(led->led_no); -+ err = regmap_write(regmap, pwm, led->ldev.brightness); -+ if (err) -+ dev_err(led->ldev.dev, "Failed setting brightness\n"); -+} -+ -+static void -+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ struct tlc59116_led *led = ldev_to_led(led_cdev); -+ -+ led->ldev.brightness = value; -+ schedule_work(&led->work); -+} -+ -+static void -+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i) -+{ -+ while (--i >= 0) { -+ if (priv->leds[i].active) { -+ led_classdev_unregister(&priv->leds[i].ldev); -+ cancel_work_sync(&priv->leds[i].work); -+ } -+ } -+} -+ -+static int -+tlc59116_configure(struct device *dev, -+ struct tlc59116_priv *priv, -+ struct regmap *regmap) -+{ -+ unsigned int i; -+ int err = 0; -+ -+ tlc59116_set_mode(regmap, MODE2_DIM); -+ for (i = 0; i < TLC59116_LEDS; i++) { -+ struct tlc59116_led *led = &priv->leds[i]; -+ -+ if (!led->active) -+ continue; -+ -+ led->regmap = regmap; -+ led->led_no = i; -+ led->ldev.brightness_set = tlc59116_led_set; -+ led->ldev.max_brightness = LED_FULL; -+ INIT_WORK(&led->work, tlc59116_led_work); -+ err = led_classdev_register(dev, &led->ldev); -+ if (err < 0) { -+ dev_err(dev, "couldn't register LED %s\n", -+ led->ldev.name); -+ goto exit; -+ } -+ tlc59116_set_led(led, TLC59116_DIM); -+ } -+ -+ return 0; -+ -+exit: -+ tlc59116_destroy_devices(priv, i); -+ return err; -+} -+ -+static const struct regmap_config tlc59116_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = 0x1e, -+}; -+ -+static int -+tlc59116_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ struct device *dev = &client->dev; -+ struct device_node *np = client->dev.of_node, *child; -+ struct regmap *regmap; -+ int err, count, reg; -+ -+ count = of_get_child_count(np); -+ if (!count || count > TLC59116_LEDS) -+ return -EINVAL; -+ -+ if (!i2c_check_functionality(client->adapter, -+ I2C_FUNC_SMBUS_BYTE_DATA)) -+ return -EIO; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap); -+ if (IS_ERR(regmap)) { -+ err = PTR_ERR(regmap); -+ dev_err(dev, "Failed to allocate register map: %d\n", err); -+ return err; -+ } -+ -+ i2c_set_clientdata(client, priv); -+ -+ for_each_child_of_node(np, child) { -+ err = of_property_read_u32(child, "reg", ®); -+ if (err) -+ return err; -+ if (reg < 0 || reg >= TLC59116_LEDS) -+ return -EINVAL; -+ if (priv->leds[reg].active) -+ return -EINVAL; -+ priv->leds[reg].active = true; -+ priv->leds[reg].ldev.name = -+ of_get_property(child, "label", NULL) ? : child->name; -+ priv->leds[reg].ldev.default_trigger = -+ of_get_property(child, "linux,default-trigger", NULL); -+ } -+ return tlc59116_configure(dev, priv, regmap); -+} -+ -+static int -+tlc59116_remove(struct i2c_client *client) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ -+ tlc59116_destroy_devices(priv, TLC59116_LEDS); -+ -+ return 0; -+} -+ -+static const struct of_device_id of_tlc59116_leds_match[] = { -+ { .compatible = "ti,tlc59116", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match); -+ -+static const struct i2c_device_id tlc59116_id[] = { -+ { "tlc59116" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(i2c, tlc59116_id); -+ -+static struct i2c_driver tlc59116_driver = { -+ .driver = { -+ .name = "tlc59116", -+ .of_match_table = of_match_ptr(of_tlc59116_leds_match), -+ }, -+ .probe = tlc59116_probe, -+ .remove = tlc59116_remove, -+ .id_table = tlc59116_id, -+}; -+ -+module_i2c_driver(tlc59116_driver); -+ -+MODULE_AUTHOR("Andrew Lunn "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("TLC59116 LED driver"); diff --git a/target/linux/mvebu/patches-4.0/100-find_active_root.patch b/target/linux/mvebu/patches-4.0/100-find_active_root.patch deleted file mode 100644 index e32b6089d1..0000000000 --- a/target/linux/mvebu/patches-4.0/100-find_active_root.patch +++ /dev/null @@ -1,61 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz - ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_ofpart_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct device_node *node; - const char *partname; -+ const char *owrtpart = "ubi"; - struct device_node *pp; - int nr_parts, i; - -@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc - (*pparts)[i].offset = of_read_number(reg, a_cells); - (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - (*pparts)[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-4.0/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-4.0/102-revert_i2c_delay.patch deleted file mode 100644 index 42ee3b4743..0000000000 --- a/target/linux/mvebu/patches-4.0/102-revert_i2c_delay.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -88,12 +88,10 @@ - }; - - i2c0: i2c@11000 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - diff --git a/target/linux/mvebu/patches-4.0/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-4.0/202-gpio_mvebu_add_limited_pwm_support.patch deleted file mode 100644 index f1b868851a..0000000000 --- a/target/linux/mvebu/patches-4.0/202-gpio_mvebu_add_limited_pwm_support.patch +++ /dev/null @@ -1,433 +0,0 @@ -Armada 370/XP devices can 'blink' gpio lines with a configurable on -and off period. This can be modelled as a PWM. - -However, there are only two sets of PWM configuration registers for -all the gpio lines. This driver simply allows a single gpio line per -gpio chip of 32 lines to be used as a PWM. Attempts to use more return -EBUSY. - -Due to the interleaving of registers it is not simple to separate the -PWM driver from the gpio driver. Thus the gpio driver has been -extended with a PWM driver. - -Signed-off-by: Andrew Lunn ---- - drivers/gpio/Kconfig | 5 ++ - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpio-mvebu.c | 37 +++----- - drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++ - 5 files changed, 299 insertions(+), 25 deletions(-) - create mode 100644 drivers/gpio/gpio-mvebu-pwm.c - create mode 100644 drivers/gpio/gpio-mvebu.h - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -246,6 +246,11 @@ config GPIO_MVEBU - select GPIO_GENERIC - select GENERIC_IRQ_CHIP - -+config GPIO_MVEBU_PWM -+ def_bool y -+ depends on GPIO_MVEBU -+ depends on PWM -+ - config GPIO_MXC - def_bool y - depends on ARCH_MXC ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -61,6 +61,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o - obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o - obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o -+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o - obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu-pwm.c -@@ -0,0 +1,202 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include "gpio-mvebu.h" -+#include "gpiolib.h" -+ -+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip) -+{ -+ return mvchip->membase + GPIO_BLINK_CNT_SELECT; -+} -+ -+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct mvebu_pwm, chip); -+} -+ -+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm) -+{ -+ return container_of(pwm, struct mvebu_gpio_chip, pwm); -+} -+ -+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ int ret = 0; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ if (pwm->used) { -+ ret = -EBUSY; -+ } else { -+ if (!desc) { -+ ret = -ENODEV; -+ goto out; -+ } -+ ret = gpiod_request(desc, "mvebu-pwm"); -+ if (ret) -+ goto out; -+ -+ ret = gpiod_direction_output(desc, 0); -+ if (ret) { -+ gpiod_free(desc); -+ goto out; -+ } -+ -+ pwm->pin = pwmd->pwm - mvchip->chip.base; -+ pwm->used = true; -+ } -+ -+out: -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return ret; -+} -+ -+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ gpiod_free(desc); -+ pwm->used = false; -+ spin_unlock_irqrestore(&pwm->lock, flags); -+} -+ -+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd, -+ int duty_ns, int period_ns) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ unsigned int on, off; -+ unsigned long long val; -+ u32 u; -+ -+ val = (unsigned long long) pwm->clk_rate * duty_ns; -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ on = val; -+ else -+ on = 1; -+ -+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns); -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ off = val; -+ else -+ off = 1; -+ -+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ u &= ~(1 << pwm->pin); -+ u |= (pwm->id << pwm->pin); -+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip)); -+ -+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION); -+ -+ return 0; -+} -+ -+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1); -+ -+ return 0; -+} -+ -+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0); -+} -+ -+static const struct pwm_ops mvebu_pwm_ops = { -+ .request = mvebu_pwm_request, -+ .free = mvebu_pwm_free, -+ .config = mvebu_pwm_config, -+ .enable = mvebu_pwm_enable, -+ .disable = mvebu_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ pwm->blink_on_duration = -+ readl_relaxed(pwm->membase + BLINK_ON_DURATION); -+ pwm->blink_off_duration = -+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION); -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip)); -+ writel_relaxed(pwm->blink_on_duration, -+ pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(pwm->blink_off_duration, -+ pwm->membase + BLINK_OFF_DURATION); -+} -+ -+/* -+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs -+ * don't have this hardware. So if we don't have the necessary -+ * resource, it is not an error. -+ */ -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ struct device *dev = &pdev->dev; -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ struct resource *res; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); -+ if (!res) -+ return 0; -+ -+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mvchip->pwm.membase)) -+ return PTR_ERR(mvchip->percpu_membase); -+ -+ if (id < 0 || id > 1) -+ return -EINVAL; -+ pwm->id = id; -+ -+ if (IS_ERR(mvchip->clk)) -+ return PTR_ERR(mvchip->clk); -+ -+ pwm->clk_rate = clk_get_rate(mvchip->clk); -+ if (!pwm->clk_rate) { -+ dev_err(dev, "failed to get clock rate\n"); -+ return -EINVAL; -+ } -+ -+ pwm->chip.dev = dev; -+ pwm->chip.ops = &mvebu_pwm_ops; -+ pwm->chip.base = mvchip->chip.base; -+ pwm->chip.npwm = mvchip->chip.ngpio; -+ pwm->chip.can_sleep = false; -+ -+ spin_lock_init(&pwm->lock); -+ -+ return pwmchip_add(&pwm->chip); -+} ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -42,10 +42,11 @@ - #include - #include - #include -+#include - #include - #include - #include -- -+#include "gpio-mvebu.h" - /* - * GPIO unit register offsets. - */ -@@ -75,24 +76,6 @@ - - #define MVEBU_MAX_GPIO_PER_BANK 32 - --struct mvebu_gpio_chip { -- struct gpio_chip chip; -- spinlock_t lock; -- void __iomem *membase; -- void __iomem *percpu_membase; -- int irqbase; -- struct irq_domain *domain; -- int soc_variant; -- -- /* Used to preserve GPIO registers across suspend/resume */ -- u32 out_reg; -- u32 io_conf_reg; -- u32 blink_en_reg; -- u32 in_pol_reg; -- u32 edge_mask_regs[4]; -- u32 level_mask_regs[4]; --}; -- - /* - * Functions returning addresses of individual registers for a given - * GPIO controller. -@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch - return (u >> pin) & 1; - } - --static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) - { - struct mvebu_gpio_chip *mvchip = - container_of(chip, struct mvebu_gpio_chip, chip); -@@ -617,6 +600,8 @@ static int mvebu_gpio_suspend(struct pla - BUG(); - } - -+ mvebu_pwm_suspend(mvchip); -+ - return 0; - } - -@@ -660,6 +645,8 @@ static int mvebu_gpio_resume(struct plat - BUG(); - } - -+ mvebu_pwm_resume(mvchip); -+ - return 0; - } - -@@ -671,7 +658,6 @@ static int mvebu_gpio_probe(struct platf - struct resource *res; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; -- struct clk *clk; - unsigned int ngpios; - int soc_variant; - int i, cpu, id; -@@ -701,10 +687,10 @@ static int mvebu_gpio_probe(struct platf - return id; - } - -- clk = devm_clk_get(&pdev->dev, NULL); -+ mvchip->clk = devm_clk_get(&pdev->dev, NULL); - /* Not all SoCs require a clock.*/ -- if (!IS_ERR(clk)) -- clk_prepare_enable(clk); -+ if (!IS_ERR(mvchip->clk)) -+ clk_prepare_enable(mvchip->clk); - - mvchip->soc_variant = soc_variant; - mvchip->chip.label = dev_name(&pdev->dev); -@@ -838,7 +824,8 @@ static int mvebu_gpio_probe(struct platf - goto err_generic_chip; - } - -- return 0; -+ /* Armada 370/XP has simple PWM support for gpio lines */ -+ return mvebu_pwm_probe(pdev, mvchip, id); - - err_generic_chip: - irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu.h -@@ -0,0 +1,79 @@ -+/* -+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins -+ * -+ * Copyright (C) 2015, Andrew Lunn -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef MVEBU_GPIO_PWM_H -+#define MVEBU_GPIO_PWM_H -+ -+#define BLINK_ON_DURATION 0x0 -+#define BLINK_OFF_DURATION 0x4 -+#define GPIO_BLINK_CNT_SELECT 0x0020 -+ -+struct mvebu_pwm { -+ void __iomem *membase; -+ unsigned long clk_rate; -+ bool used; -+ unsigned pin; -+ struct pwm_chip chip; -+ int id; -+ spinlock_t lock; -+ -+ /* Used to preserve GPIO/PWM registers across suspend / -+ * resume */ -+ u32 blink_select; -+ u32 blink_on_duration; -+ u32 blink_off_duration; -+}; -+ -+struct mvebu_gpio_chip { -+ struct gpio_chip chip; -+ spinlock_t lock; -+ void __iomem *membase; -+ void __iomem *percpu_membase; -+ int irqbase; -+ struct irq_domain *domain; -+ int soc_variant; -+ struct clk *clk; -+#ifdef CONFIG_PWM -+ struct mvebu_pwm pwm; -+#endif -+ /* Used to preserve GPIO registers across suspend/resume */ -+ u32 out_reg; -+ u32 io_conf_reg; -+ u32 blink_en_reg; -+ u32 in_pol_reg; -+ u32 edge_mask_regs[4]; -+ u32 level_mask_regs[4]; -+}; -+ -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value); -+ -+#ifdef CONFIG_PWM -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id); -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip); -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip); -+#else -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ return 0; -+} -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+} -+#endif -+#endif diff --git a/target/linux/mvebu/patches-4.0/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-4.0/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch deleted file mode 100644 index 48f93944bf..0000000000 --- a/target/linux/mvebu/patches-4.0/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch +++ /dev/null @@ -1,52 +0,0 @@ -Document the optional parameters needed for PWM operation of gpio -lines. - -Signed-off-by: Andrew Lunn ---- - .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -@@ -38,6 +38,23 @@ Required properties: - - #gpio-cells: Should be two. The first cell is the pin number. The - second cell is reserved for flags, unused at the moment. - -+Optional properties: -+ -+In order to use the gpio lines in PWM mode, some additional optional -+properties are required. Only Armada 370 and XP supports these -+properties. -+ -+- reg: an additional register set is needed, for the GPIO Blink -+ Counter on/off registers. -+ -+- reg-names: Must contain an entry "pwm" corresponding to the -+ additional register range needed for pwm operation. -+ -+- #pwm-cells: Should be two. The first cell is the pin number. The -+ second cell is reserved for flags, unused at the moment. -+ -+- clocks: Must be a phandle to the clock for the gpio controller. -+ - Example: - - gpio0: gpio@d0018100 { -@@ -51,3 +68,17 @@ Example: - #interrupt-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; - }; -+ -+ gpio1: gpio@18140 { -+ compatible = "marvell,orion-gpio"; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; -+ ngpios = <17>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #pwm-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; -+ }; diff --git a/target/linux/mvebu/patches-4.0/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-4.0/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch deleted file mode 100644 index dff29dcfe2..0000000000 --- a/target/linux/mvebu/patches-4.0/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch +++ /dev/null @@ -1,149 +0,0 @@ -Add properties to the gpio nodes to allow them to be also used -as pwm lines. - -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- - 4 files changed, 30 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -157,24 +157,30 @@ - - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -203,24 +203,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -287,24 +287,28 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -325,24 +325,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { diff --git a/target/linux/mvebu/patches-4.0/205-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-4.0/205-arm_mvebu_enable_pwm_in_defconfig.patch deleted file mode 100644 index 4b52ac2529..0000000000 --- a/target/linux/mvebu/patches-4.0/205-arm_mvebu_enable_pwm_in_defconfig.patch +++ /dev/null @@ -1,18 +0,0 @@ -Now that the gpio driver also supports PWM operation, enable -the PWM framework in mvebu_v7_defconfig. - -Signed-off-by: Andrew Lunn ---- - arch/arm/configs/mvebu_v7_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/configs/mvebu_v7_defconfig -+++ b/arch/arm/configs/mvebu_v7_defconfig -@@ -118,6 +118,7 @@ CONFIG_DMADEVICES=y - CONFIG_MV_XOR=y - # CONFIG_IOMMU_SUPPORT is not set - CONFIG_MEMORY=y -+CONFIG_PWM=y - CONFIG_EXT4_FS=y - CONFIG_ISO9660_FS=y - CONFIG_JOLIET=y diff --git a/target/linux/mvebu/patches-4.0/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-4.0/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch deleted file mode 100644 index dddd67a95a..0000000000 --- a/target/linux/mvebu/patches-4.0/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch +++ /dev/null @@ -1,28 +0,0 @@ -The mvebu gpio driver can also perform PWM on some pins. Us the -pwm-fan driver to control the fan of the WRT1900AC, giving us fine -grain control over its speed and hence noise. - -Signed-off-by: Andrew Lunn ---- - arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -407,13 +407,11 @@ - }; - }; - -- gpio_fan { -+ pwm_fan { - /* SUNON HA4010V4-0000-C99 */ -- compatible = "gpio-fan"; -- gpios = <&gpio0 24 0>; - -- gpio-fan,speed-map = <0 0 -- 4500 1>; -+ compatible = "pwm-fan"; -+ pwms = <&gpio0 24 4000 0>; - }; - - mvsw61xx { diff --git a/target/linux/mvebu/patches-4.0/207-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-4.0/207-armada-385-rd-mtd-partitions.patch deleted file mode 100644 index 51408ddd9b..0000000000 --- a/target/linux/mvebu/patches-4.0/207-armada-385-rd-mtd-partitions.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-388-rd.dts -+++ b/arch/arm/boot/dts/armada-388-rd.dts -@@ -77,6 +77,16 @@ - compatible = "st,m25p128"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x400000>; -+ }; -+ -+ partition@1 { -+ label = "firmware"; -+ reg = <0x400000 0xc00000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.0/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.0/208-ARM-mvebu-385-ap-Add-partitions.patch deleted file mode 100644 index 2845181104..0000000000 --- a/target/linux/mvebu/patches-4.0/208-ARM-mvebu-385-ap-Add-partitions.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 13 Jan 2015 11:14:09 +0100 -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -162,6 +162,21 @@ - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; -+ -+ mtd0@00000000 { -+ label = "u-boot"; -+ reg = <0x00000000 0x00800000>; -+ }; -+ -+ mtd1@00800000 { -+ label = "kernel"; -+ reg = <0x00800000 0x00800000>; -+ }; -+ -+ mtd2@01000000 { -+ label = "ubi"; -+ reg = <0x01000000 0x3f000000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-4.0/300-add_missing_labels.patch b/target/linux/mvebu/patches-4.0/300-add_missing_labels.patch deleted file mode 100644 index a34f6895ac..0000000000 --- a/target/linux/mvebu/patches-4.0/300-add_missing_labels.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -491,7 +491,7 @@ - status = "disabled"; - }; - -- mdio@72004 { -+ mdio: mdio@72004 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; diff --git a/target/linux/mvebu/patches-4.0/700-usb_xhci_plat_phy_support.patch b/target/linux/mvebu/patches-4.0/700-usb_xhci_plat_phy_support.patch deleted file mode 100644 index a315b8775f..0000000000 --- a/target/linux/mvebu/patches-4.0/700-usb_xhci_plat_phy_support.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -155,12 +156,27 @@ static int xhci_plat_probe(struct platfo - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) - xhci->shared_hcd->can_do_streams = 1; - -+ hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); -+ if (IS_ERR(hcd->usb_phy)) { -+ ret = PTR_ERR(hcd->usb_phy); -+ if (ret == -EPROBE_DEFER) -+ goto put_usb3_hcd; -+ hcd->usb_phy = NULL; -+ } else { -+ ret = usb_phy_init(hcd->usb_phy); -+ if (ret) -+ goto put_usb3_hcd; -+ } -+ - ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); - if (ret) -- goto put_usb3_hcd; -+ goto disable_usb_phy; - - return 0; - -+disable_usb_phy: -+ usb_phy_shutdown(hcd->usb_phy); -+ - put_usb3_hcd: - usb_put_hcd(xhci->shared_hcd); - -@@ -184,6 +200,7 @@ static int xhci_plat_remove(struct platf - struct clk *clk = xhci->clk; - - usb_remove_hcd(xhci->shared_hcd); -+ usb_phy_shutdown(hcd->usb_phy); - usb_put_hcd(xhci->shared_hcd); - - usb_remove_hcd(hcd); -- 2.30.2