From 07765f28b7911ca8207b6e7ec94508a5740c4697 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 20 Nov 2023 11:46:26 +0100 Subject: [PATCH] mediatek: filogic: add Acelink EW-7886CAX support MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point. It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and on-SoC Wi-Fi. There is no printed MAC label (on my unit). My unit came with Mediatek's firmware (based on OpenWrt 21.02) installed. It was possible to simply upgrade using OpenWrt's sysupgrade tool. Another verified upgrade method is using U-Boot (requires UART). During every boot there is "U-Boot Boot Menu". Selecting option "2. Upgrade firmware" allows using U-Boot's tftp client to load and flash factory image. Signed-off-by: Rafał Miłecki --- .../dts/mt7986a-acelink-ew-7886cax.dts | 238 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 3 + target/linux/mediatek/image/filogic.mk | 17 ++ 3 files changed, 258 insertions(+) create mode 100644 target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts diff --git a/target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts b/target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts new file mode 100644 index 0000000000..1bf5d7317e --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + compatible = "acelink,ew-7886cax", "mediatek,mt7986a"; + model = "Acelink EW-7886CAX"; + + aliases { + serial0 = &uart0; + led-boot = &led_status_blue; + led-running = &led_status_green; + led-upgrade = &led_status_red; + led-failsafe = &led_status_red; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-restart { + label = "Reset"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: led-0 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 18 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: led-2 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + nvmem-cells = <&macaddr>; + nvmem-cell-names = "mac-address"; + }; + + mdio-bus { + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-delay-us = <50000>; + reset-post-delay-us = <20000>; + #address-cells = <1>; + #size-cells = <0>; + + /* Maxlinear GPY211C */ + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x80000>; + label = "u-boot-env"; + }; + + partition@180000 { + compatible = "nvmem-cells"; + reg = <0x180000 0x200000>; + label = "factory"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + }; + + partition@380000 { + reg = <0x380000 0x200000>; + label = "fip"; + }; + + partition@580000 { + reg = <0x580000 0x4000000>; + label = "ubi"; + }; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 275a322a65..962cdfb83a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -8,6 +8,9 @@ mediatek_setup_interfaces() local board="$1" case $board in + acelink,ew-7886cax) + ucidef_set_interface_lan "eth0" "dhcp" + ;; acer,predator-w6) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index f9d85f75a5..58dc2ce97f 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -105,6 +105,23 @@ define Build/cetron-header rm $@.tmp endef +define Device/acelink_ew-7886cax + DEVICE_VENDOR := Acelink + DEVICE_MODEL := EW-7886CAX + DEVICE_DTS := mt7986a-acelink-ew-7886cax + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += acelink_ew-7886cax + define Device/acer_predator-w6 DEVICE_VENDOR := Acer DEVICE_MODEL := Predator W6 -- 2.30.2