From 2c6768219221954c731b14f43f57840a96002a03 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 18 Aug 2014 13:09:14 +0000 Subject: [PATCH 1/1] ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the mini-PCIe device. Not configuring the LED pin inside the platform data makes it impossible to configure it through any standard OpenWrt tool. Signed-off-by: Sven Eckelmann SVN-Revision: 42184 --- target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c index 496956446b..701330cebd 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c @@ -164,6 +164,7 @@ static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds) static void __init mr600_setup(void) { mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio); + ap9x_pci_setup_wmac_led_pin(0, 0); } MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup); -- 2.30.2