From 405b5c2b925d4e6342c364d12264a6a108d13ba7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 16 Dec 2013 19:09:57 +0000 Subject: [PATCH] busybox: remove busybox menuconfig from top level menuconfig This will help with avoiding bogus bug reports caused by stale configs and bad cases of user tinkering :) Signed-off-by: Felix Fietkau SVN-Revision: 39106 --- package/utils/busybox/Config.in | 4 +- package/utils/busybox/Makefile | 28 +- package/utils/busybox/config/Config.in | 778 ------------ .../utils/busybox/config/archival/Config.in | 380 ------ .../busybox/config/console-tools/Config.in | 177 --- .../utils/busybox/config/coreutils/Config.in | 913 -------------- .../busybox/config/debianutils/Config.in | 86 -- package/utils/busybox/config/default | 869 +++++++++++++ .../utils/busybox/config/e2fsprogs/Config.in | 72 -- .../config/e2fsprogs/old_e2fsprogs/Config.in | 70 -- .../utils/busybox/config/editors/Config.in | 206 ---- .../utils/busybox/config/findutils/Config.in | 252 ---- package/utils/busybox/config/init/Config.in | 185 --- package/utils/busybox/config/libbb/Config.in | 232 ---- .../utils/busybox/config/loginutils/Config.in | 329 ----- .../utils/busybox/config/mailutils/Config.in | 56 - .../utils/busybox/config/miscutils/Config.in | 766 ------------ .../utils/busybox/config/modutils/Config.in | 269 ---- .../utils/busybox/config/networking/Config.in | 1088 ----------------- .../busybox/config/networking/udhcp/Config.in | 155 --- package/utils/busybox/config/nfsmount | 2 + .../utils/busybox/config/printutils/Config.in | 29 - package/utils/busybox/config/procps/Config.in | 260 ---- package/utils/busybox/config/runit/Config.in | 90 -- .../utils/busybox/config/selinux/Config.in | 125 -- package/utils/busybox/config/shell/Config.in | 433 ------- .../utils/busybox/config/sysklogd/Config.in | 154 --- .../utils/busybox/config/util-linux/Config.in | 985 --------------- package/utils/busybox/convert_menuconfig.pl | 78 -- 29 files changed, 886 insertions(+), 8185 deletions(-) delete mode 100644 package/utils/busybox/config/Config.in delete mode 100644 package/utils/busybox/config/archival/Config.in delete mode 100644 package/utils/busybox/config/console-tools/Config.in delete mode 100644 package/utils/busybox/config/coreutils/Config.in delete mode 100644 package/utils/busybox/config/debianutils/Config.in create mode 100644 package/utils/busybox/config/default delete mode 100644 package/utils/busybox/config/e2fsprogs/Config.in delete mode 100644 package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in delete mode 100644 package/utils/busybox/config/editors/Config.in delete mode 100644 package/utils/busybox/config/findutils/Config.in delete mode 100644 package/utils/busybox/config/init/Config.in delete mode 100644 package/utils/busybox/config/libbb/Config.in delete mode 100644 package/utils/busybox/config/loginutils/Config.in delete mode 100644 package/utils/busybox/config/mailutils/Config.in delete mode 100644 package/utils/busybox/config/miscutils/Config.in delete mode 100644 package/utils/busybox/config/modutils/Config.in delete mode 100644 package/utils/busybox/config/networking/Config.in delete mode 100644 package/utils/busybox/config/networking/udhcp/Config.in create mode 100644 package/utils/busybox/config/nfsmount delete mode 100644 package/utils/busybox/config/printutils/Config.in delete mode 100644 package/utils/busybox/config/procps/Config.in delete mode 100644 package/utils/busybox/config/runit/Config.in delete mode 100644 package/utils/busybox/config/selinux/Config.in delete mode 100644 package/utils/busybox/config/shell/Config.in delete mode 100644 package/utils/busybox/config/sysklogd/Config.in delete mode 100644 package/utils/busybox/config/util-linux/Config.in delete mode 100755 package/utils/busybox/convert_menuconfig.pl diff --git a/package/utils/busybox/Config.in b/package/utils/busybox/Config.in index 5e3a8406be..8420ef5e52 100644 --- a/package/utils/busybox/Config.in +++ b/package/utils/busybox/Config.in @@ -1,6 +1,6 @@ - if PACKAGE_busybox -source "package/utils/busybox/config/Config.in" +config BUSYBOX_ENABLE_NFS_MOUNT + bool "Enable NFS mount support endif diff --git a/package/utils/busybox/Makefile b/package/utils/busybox/Makefile index 15f96ebb3c..db8d0339d8 100644 --- a/package/utils/busybox/Makefile +++ b/package/utils/busybox/Makefile @@ -17,7 +17,7 @@ PKG_SOURCE_URL:=http://www.busybox.net/downloads \ http://distfiles.gentoo.org/distfiles/ PKG_MD5SUM:=9c0cae5a0379228e7b55e5b29528df8e -PKG_BUILD_DEPENDS:=BUSYBOX_CONFIG_FEATURE_HAVE_RPC:librpc +PKG_CONFIG_DEPENDS:=CONFIG_BUSYBOX_ENABLE_NFS_MOUNT PKG_BUILD_PARALLEL:=1 PKG_LICENSE:=GPLv2 BSD-4c @@ -25,10 +25,6 @@ PKG_LICENSE_FILES:=LICENSE archival/libarchive/bz/LICENSE include $(INCLUDE_DIR)/package.mk -ifeq ($(DUMP),) - STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell $(SH_FUNC) grep '^CONFIG_BUSYBOX_' $(TOPDIR)/.config | md5s) -endif - ifneq ($(findstring c,$(OPENWRT_VERBOSE)),) BB_MAKE_VERBOSE := V=1 else @@ -46,7 +42,7 @@ define Package/busybox MAINTAINER:=Nicolas Thill TITLE:=Core utilities for embedded Linux URL:=http://busybox.net/ - DEPENDS:=+BUSYBOX_CONFIG_FEATURE_HAVE_RPC:librpc + DEPENDS:=+BUSYBOX_ENABLE_NFS_MOUNT:librpc MENU:=1 endef @@ -59,9 +55,18 @@ define Package/busybox/config source "$(SOURCE)/Config.in" endef +CONFIG_TEMPLATE:=./config/default + +LDLIBS:=m crypt +ifdef CONFIG_BUSYBOX_ENABLE_NFS_MOUNT + TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include + export LDFLAGS=$(TARGET_LDFLAGS) + LDLIBS += rpc + CONFIG_TEMPLATE:=+ $(CONFIG_TEMPLATE) ./config/nfsmount +endif + define Build/Configure - rm -f $(PKG_BUILD_DIR)/.configured* - grep 'CONFIG_BUSYBOX_' $(TOPDIR)/.config | sed -e "s,\\(# \)\\?CONFIG_BUSYBOX_\\(.*\\),\\1\\2,g" > $(PKG_BUILD_DIR)/.config + $(SCRIPT_DIR)/kconfig.pl $(CONFIG_TEMPLATE) > $(PKG_BUILD_DIR)/.config yes 'n' | $(MAKE) -C $(PKG_BUILD_DIR) \ CC="$(TARGET_CC)" \ CROSS_COMPILE="$(TARGET_CROSS)" \ @@ -75,13 +80,6 @@ ifdef CONFIG_GCC_VERSION_LLVM TARGET_CFLAGS += -fnested-functions endif -LDLIBS:=m crypt -ifdef CONFIG_BUSYBOX_CONFIG_FEATURE_HAVE_RPC - TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include - export LDFLAGS=$(TARGET_LDFLAGS) - LDLIBS += rpc -endif - define Build/Compile +$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \ CC="$(TARGET_CC)" \ diff --git a/package/utils/busybox/config/Config.in b/package/utils/busybox/config/Config.in deleted file mode 100644 index f9521de320..0000000000 --- a/package/utils/busybox/config/Config.in +++ /dev/null @@ -1,778 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - - -config BUSYBOX_CONFIG_HAVE_DOT_CONFIG - bool - default y - -menu "Busybox Settings" - -menu "General Configuration" - -config BUSYBOX_CONFIG_DESKTOP - bool "Enable options for full-blown desktop systems" - default n - help - Enable options and features which are not essential. - Select this only if you plan to use busybox on full-blown - desktop machine with common Linux distro, not on an embedded box. - -config BUSYBOX_CONFIG_EXTRA_COMPAT - bool "Provide compatible behavior for rare corner cases (bigger code)" - default n - help - This option makes grep, sed etc handle rare corner cases - (embedded NUL bytes and such). This makes code bigger and uses - some GNU extensions in libc. You probably only need this option - if you plan to run busybox on desktop. - -config BUSYBOX_CONFIG_INCLUDE_SUSv2 - bool "Enable obsolete features removed before SUSv3" - default y - help - This option will enable backwards compatibility with SuSv2, - specifically, old-style numeric options ('command -1 ') - will be supported in head, tail, and fold. (Note: should - affect renice too.) - -config BUSYBOX_CONFIG_USE_PORTABLE_CODE - bool "Avoid using GCC-specific code constructs" - default n - help - Use this option if you are trying to compile busybox with - compiler other than gcc. - If you do use gcc, this option may needlessly increase code size. - -config BUSYBOX_CONFIG_PLATFORM_LINUX - bool "Enable Linux-specific applets and features" - default y - help - For the most part, busybox requires only POSIX compatibility - from the target system, but some applets and features use - Linux-specific interfaces. - - Answering 'N' here will disable such applets and hide the - corresponding configuration options. - -choice - prompt "Buffer allocation policy" - default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK - help - There are 3 ways BusyBox can handle buffer allocations: - - Use malloc. This costs code size for the call to xmalloc. - - Put them on stack. For some very small machines with limited stack - space, this can be deadly. For most folks, this works just fine. - - Put them in BSS. This works beautifully for computers with a real - MMU (and OS support), but wastes runtime RAM for uCLinux. This - behavior was the only one available for BusyBox versions 0.48 and - earlier. - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC - bool "Allocate with Malloc" - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK - bool "Allocate on the Stack" - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS - bool "Allocate in the .bss section" - -endchoice - -config BUSYBOX_CONFIG_SHOW_USAGE - bool "Show terse applet usage messages" - default y - help - All BusyBox applets will show help messages when invoked with - wrong arguments. You can turn off printing these terse usage - messages if you say no here. - This will save you up to 7k. - -config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE - bool "Show verbose applet usage messages" - default y - depends on BUSYBOX_CONFIG_SHOW_USAGE - help - All BusyBox applets will show more verbose help messages when - busybox is invoked with --help. This will add a lot of text to the - busybox binary. In the default configuration, this will add about - 13k, but it can add much more depending on your configuration. - -config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE - bool "Store applet usage messages in compressed form" - default y - depends on BUSYBOX_CONFIG_SHOW_USAGE - help - Store usage messages in compressed form, uncompress them on-the-fly - when --help is called. - - If you have a really tiny busybox with few applets enabled (and - bunzip2 isn't one of them), the overhead of the decompressor might - be noticeable. Also, if you run executables directly from ROM - and have very little memory, this might not be a win. Otherwise, - you probably want this. - -config BUSYBOX_CONFIG_FEATURE_INSTALLER - bool "Support --install [-s] to install applet links at runtime" - default n - help - Enable 'busybox --install [-s]' support. This will allow you to use - busybox at runtime to create hard links or symlinks for all the - applets that are compiled into busybox. - -config BUSYBOX_CONFIG_INSTALL_NO_USR - bool "Don't use /usr" - default n - help - Disable use of /usr. busybox --install and "make install" - will install applets only to /bin and /sbin, - never to /usr/bin or /usr/sbin. - -config BUSYBOX_CONFIG_LOCALE_SUPPORT - bool "Enable locale support (system needs locale for this to work)" - default n - help - Enable this if your system has locale support and you would like - busybox to support locale settings. - -config BUSYBOX_CONFIG_UNICODE_SUPPORT - bool "Support Unicode" - default n - help - This makes various applets aware that one byte is not - one character on screen. - - Busybox aims to eventually work correctly with Unicode displays. - Any older encodings are not guaranteed to work. - Probably by the time when busybox will be fully Unicode-clean, - other encodings will be mainly of historic interest. - -config BUSYBOX_CONFIG_UNICODE_USING_LOCALE - bool "Use libc routines for Unicode (else uses internal ones)" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && BUSYBOX_CONFIG_LOCALE_SUPPORT - help - With this option on, Unicode support is implemented using libc - routines. Otherwise, internal implementation is used. - Internal implementation is smaller. - -config BUSYBOX_CONFIG_FEATURE_CHECK_UNICODE_IN_ENV - bool "Check $LANG environment variable" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE - help - With this option on, Unicode support is activated - only if LANG variable has the value of the form "xxxx.utf8" - - Otherwise, Unicode support will be always enabled and active. - -config BUSYBOX_CONFIG_SUBST_WCHAR - int "Character code to substitute unprintable characters with" - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT - default 63 - help - Typical values are 63 for '?' (works with any output device), - 30 for ASCII substitute control code, - 65533 (0xfffd) for Unicode replacement character. - -config BUSYBOX_CONFIG_LAST_SUPPORTED_WCHAR - int "Range of supported Unicode characters" - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT - default 767 - help - Any character with Unicode value bigger than this is assumed - to be non-printable on output device. Many applets replace - such chars with substitution character. - - The idea is that many valid printable Unicode chars are - nevertheless are not displayed correctly. Think about - combining charachers, double-wide hieroglyphs, obscure - characters in dozens of ancient scripts... - Many terminals, terminal emulators, xterms etc will fail - to handle them correctly. Choose the smallest value - which suits your needs. - - Typical values are: - 126 - ASCII only - 767 (0x2ff) - there are no combining chars in [0..767] range - (the range includes Latin 1, Latin Ext. A and B), - code is ~700 bytes smaller for this case. - 4351 (0x10ff) - there are no double-wide chars in [0..4351] range, - code is ~300 bytes smaller for this case. - 12799 (0x31ff) - nearly all non-ideographic characters are - available in [0..12799] range, including - East Asian scripts like katakana, hiragana, hangul, - bopomofo... - 0 - off, any valid printable Unicode character will be printed. - -config BUSYBOX_CONFIG_UNICODE_COMBINING_WCHARS - bool "Allow zero-width Unicode characters on output" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT - help - With this option off, any Unicode char with width of 0 - is substituted on output. - -config BUSYBOX_CONFIG_UNICODE_WIDE_WCHARS - bool "Allow wide Unicode characters on output" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT - help - With this option off, any Unicode char with width > 1 - is substituted on output. - -config BUSYBOX_CONFIG_UNICODE_BIDI_SUPPORT - bool "Bidirectional character-aware line input" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE - help - With this option on, right-to-left Unicode characters - are treated differently on input (e.g. cursor movement). - -config BUSYBOX_CONFIG_UNICODE_NEUTRAL_TABLE - bool "In bidi input, support non-ASCII neutral chars too" - default n - depends on BUSYBOX_CONFIG_UNICODE_BIDI_SUPPORT - help - In most cases it's enough to treat only ASCII non-letters - (i.e. punctuation, numbers and space) as characters - with neutral directionality. - With this option on, more extensive (and bigger) table - of neutral chars will be used. - -config BUSYBOX_CONFIG_UNICODE_PRESERVE_BROKEN - bool "Make it possible to enter sequences of chars which are not Unicode" - default n - depends on BUSYBOX_CONFIG_UNICODE_SUPPORT - help - With this option on, on line-editing input (such as used by shells) - invalid UTF-8 bytes are not substituted with the selected - substitution character. - For example, this means that entering 'l', 's', ' ', 0xff, [Enter] - at shell prompt will list file named 0xff (single char name - with char value 255), not file named '?'. - -config BUSYBOX_CONFIG_LONG_OPTS - bool "Support for --long-options" - default y - help - Enable this if you want busybox applets to use the gnu --long-option - style, in addition to single character -a -b -c style options. - -config BUSYBOX_CONFIG_FEATURE_DEVPTS - bool "Use the devpts filesystem for Unix98 PTYs" - default y - help - Enable if you want BusyBox to use Unix98 PTY support. If enabled, - busybox will use /dev/ptmx for the master side of the pseudoterminal - and /dev/pts/ for the slave side. Otherwise, BSD style - /dev/ttyp will be used. To use this option, you should have - devpts mounted. - -config BUSYBOX_CONFIG_FEATURE_CLEAN_UP - bool "Clean up all memory before exiting (usually not needed)" - default n - help - As a size optimization, busybox normally exits without explicitly - freeing dynamically allocated memory or closing files. This saves - space since the OS will clean up for us, but it can confuse debuggers - like valgrind, which report tons of memory and resource leaks. - - Don't enable this unless you have a really good reason to clean - things up manually. - -config BUSYBOX_CONFIG_FEATURE_UTMP - bool "Support utmp file" - default n - help - The file /var/run/utmp is used to track who is currently logged in. - With this option on, certain applets (getty, login, telnetd etc) - will create and delete entries there. - "who" applet requires this option. - -config BUSYBOX_CONFIG_FEATURE_WTMP - bool "Support wtmp file" - default n - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - The file /var/run/wtmp is used to track when users have logged into - and logged out of the system. - With this option on, certain applets (getty, login, telnetd etc) - will append new entries there. - "last" applet requires this option. - -config BUSYBOX_CONFIG_FEATURE_PIDFILE - bool "Support writing pidfiles" - default y - help - This option makes some applets (e.g. crond, syslogd, inetd) write - a pidfile in /var/run. Some applications rely on them. - -config BUSYBOX_CONFIG_FEATURE_SUID - bool "Support for SUID/SGID handling" - default y - help - With this option you can install the busybox binary belonging - to root with the suid bit set, enabling some applets to perform - root-level operations even when run by ordinary users - (for example, mounting of user mounts in fstab needs this). - - Busybox will automatically drop priviledges for applets - that don't need root access. - - If you are really paranoid and don't want to do this, build two - busybox binaries with different applets in them (and the appropriate - symlinks pointing to each binary), and only set the suid bit on the - one that needs it. - - The applets which require root rights (need suid bit or - to be run by root) and will refuse to execute otherwise: - crontab, login, passwd, su, vlock, wall. - - The applets which will use root rights if they have them - (via suid bit, or because run by root), but would try to work - without root right nevertheless: - findfs, ping[6], traceroute[6], mount. - - Note that if you DONT select this option, but DO make busybox - suid root, ALL applets will run under root, which is a huge - security hole (think "cp /some/file /etc/passwd"). - -config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG - bool "Runtime SUID/SGID configuration via /etc/busybox.conf" - default n - depends on BUSYBOX_CONFIG_FEATURE_SUID - help - Allow the SUID / SGID state of an applet to be determined at runtime - by checking /etc/busybox.conf. (This is sort of a poor man's sudo.) - The format of this file is as follows: - - APPLET = [Ssx-][Ssx-][x-] [USER.GROUP] - - s: USER or GROUP is allowed to execute APPLET. - APPLET will run under USER or GROUP - (reagardless of who's running it). - S: USER or GROUP is NOT allowed to execute APPLET. - APPLET will run under USER or GROUP. - This option is not very sensical. - x: USER/GROUP/others are allowed to execute APPLET. - No UID/GID change will be done when it is run. - -: USER/GROUP/others are not allowed to execute APPLET. - - An example might help: - - [SUID] - su = ssx root.0 # applet su can be run by anyone and runs with - # euid=0/egid=0 - su = ssx # exactly the same - - mount = sx- root.disk # applet mount can be run by root and members - # of group disk (but not anyone else) - # and runs with euid=0 (egid is not changed) - - cp = --- # disable applet cp for everyone - - The file has to be owned by user root, group root and has to be - writeable only by root: - (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf) - The busybox executable has to be owned by user root, group - root and has to be setuid root for this to work: - (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox) - - Robert 'sandman' Griebl has more information here: - . - -config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET - bool "Suppress warning message if /etc/busybox.conf is not readable" - default n - depends on BUSYBOX_CONFIG_FEATURE_SUID_CONFIG - help - /etc/busybox.conf should be readable by the user needing the SUID, - check this option to avoid users to be notified about missing - permissions. - -config BUSYBOX_CONFIG_SELINUX - bool "Support NSA Security Enhanced Linux" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Enable support for SELinux in applets ls, ps, and id. Also provide - the option of compiling in SELinux applets. - - If you do not have a complete SELinux userland installed, this stuff - will not compile. Go visit - http://www.nsa.gov/selinux/index.html - to download the necessary stuff to allow busybox to compile with - this option enabled. Specifially, libselinux 1.28 or better is - directly required by busybox. If the installation is located in a - non-standard directory, provide it by invoking make as follows: - CFLAGS=-I \ - LDFLAGS=-L \ - make - - Most people will leave this set to 'N'. - -config BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS - bool "exec prefers applets" - default y - help - This is an experimental option which directs applets about to - call 'exec' to try and find an applicable busybox applet before - searching the PATH. This is typically done by exec'ing - /proc/self/exe. - This may affect shell, find -exec, xargs and similar applets. - They will use applets even if /bin/ -> busybox link - is missing (or is not a link to busybox). However, this causes - problems in chroot jails without mounted /proc and with ps/top - (command name can be shown as 'exe' for applets started this way). - -config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH - string "Path to BusyBox executable" - default "/proc/self/exe" - help - When Busybox applets need to run other busybox applets, BusyBox - sometimes needs to exec() itself. When the /proc filesystem is - mounted, /proc/self/exe always points to the currently running - executable. If you haven't got /proc, set this to wherever you - want to run BusyBox from. - -# These are auto-selected by other options - -config BUSYBOX_CONFIG_FEATURE_SYSLOG - bool #No description makes it a hidden option - default y - #help - # This option is auto-selected when you select any applet which may - # send its output to syslog. You do not need to select it manually. - -config BUSYBOX_CONFIG_FEATURE_HAVE_RPC - bool #No description makes it a hidden option - default n - #help - # This is automatically selected if any of enabled applets need it. - # You do not need to select it manually. - -endmenu - -menu 'Build Options' - -config BUSYBOX_CONFIG_STATIC - bool "Build BusyBox as a static binary (no shared libs)" - default n - help - If you want to build a static BusyBox binary, which does not - use or require any shared libraries, then enable this option. - This can cause BusyBox to be considerably larger, so you should - leave this option false unless you have a good reason (i.e. - your target platform does not support shared libraries, or - you are building an initrd which doesn't need anything but - BusyBox, etc). - - Most people will leave this set to 'N'. - -config BUSYBOX_CONFIG_PIE - bool "Build BusyBox as a position independent executable" - default n - depends on !BUSYBOX_CONFIG_STATIC - help - Hardened code option. PIE binaries are loaded at a different - address at each invocation. This has some overhead, - particularly on x86-32 which is short on registers. - - Most people will leave this set to 'N'. - -config BUSYBOX_CONFIG_NOMMU - bool "Force NOMMU build" - default n - help - Busybox tries to detect whether architecture it is being - built against supports MMU or not. If this detection fails, - or if you want to build NOMMU version of busybox for testing, - you may force NOMMU build here. - - Most people will leave this set to 'N'. - -# PIE can be made to work with BUILD_LIBBUSYBOX, but currently -# build system does not support that -config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - bool "Build shared libbusybox" - default n - depends on !BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS && !BUSYBOX_CONFIG_PIE && !BUSYBOX_CONFIG_STATIC - help - Build a shared library libbusybox.so.N.N.N which contains all - busybox code. - - This feature allows every applet to be built as a tiny - separate executable. Enabling it for "one big busybox binary" - approach serves no purpose and increases code size. - You should almost certainly say "no" to this. - -### config FEATURE_FULL_LIBBUSYBOX -### bool "Feature-complete libbusybox" -### default n if !FEATURE_SHARED_BUSYBOX -### depends on BUILD_LIBBUSYBOX -### help -### Build a libbusybox with the complete feature-set, disregarding -### the actually selected config. -### -### Normally, libbusybox will only contain the features which are -### used by busybox itself. If you plan to write a separate -### standalone application which uses libbusybox say 'Y'. -### -### Note: libbusybox is GPL, not LGPL, and exports no stable API that -### might act as a copyright barrier. We can and will modify the -### exported function set between releases (even minor version number -### changes), and happily break out-of-tree features. -### -### Say 'N' if in doubt. - -config BUSYBOX_CONFIG_FEATURE_INDIVIDUAL - bool "Produce a binary for each applet, linked against libbusybox" - default n - depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - help - If your CPU architecture doesn't allow for sharing text/rodata - sections of running binaries, but allows for runtime dynamic - libraries, this option will allow you to reduce memory footprint - when you have many different applets running at once. - - If your CPU architecture allows for sharing text/rodata, - having single binary is more optimal. - - Each applet will be a tiny program, dynamically linked - against libbusybox.so.N.N.N. - - You need to have a working dynamic linker. - -config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX - bool "Produce additional busybox binary linked against libbusybox" - default n - depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - help - Build busybox, dynamically linked against libbusybox.so.N.N.N. - - You need to have a working dynamic linker. - -### config BUILD_AT_ONCE -### bool "Compile all sources at once" -### default n -### help -### Normally each source-file is compiled with one invocation of -### the compiler. -### If you set this option, all sources are compiled at once. -### This gives the compiler more opportunities to optimize which can -### result in smaller and/or faster binaries. -### -### Setting this option will consume alot of memory, e.g. if you -### enable all applets with all features, gcc uses more than 300MB -### RAM during compilation of busybox. -### -### This option is most likely only beneficial for newer compilers -### such as gcc-4.1 and above. -### -### Say 'N' unless you know what you are doing. - -config BUSYBOX_CONFIG_LFS - bool - default y - help - If you want to build BusyBox with large file support, then enable - this option. This will have no effect if your kernel or your C - library lacks large file support for large files. Some of the - programs that can benefit from large file support include dd, gzip, - cp, mount, tar, and many others. If you want to access files larger - than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'. - -config BUSYBOX_CONFIG_CROSS_COMPILER_PREFIX - string "Cross Compiler prefix" - default "" - help - If you want to build BusyBox with a cross compiler, then you - will need to set this to the cross-compiler prefix, for example, - "i386-uclibc-". - - Note that CROSS_COMPILE environment variable or - "make CROSS_COMPILE=xxx ..." will override this selection. - - Native builds leave this empty. - -config BUSYBOX_CONFIG_EXTRA_CFLAGS - string "Additional CFLAGS" - default "" - help - Additional CFLAGS to pass to the compiler verbatim. - -endmenu - -menu 'Debugging Options' - -config BUSYBOX_CONFIG_DEBUG - bool "Build BusyBox with extra Debugging symbols" - default n - help - Say Y here if you wish to examine BusyBox internals while applets are - running. This increases the size of the binary considerably, and - should only be used when doing development. If you are doing - development and want to debug BusyBox, answer Y. - - Most people should answer N. - -config BUSYBOX_CONFIG_DEBUG_PESSIMIZE - bool "Disable compiler optimizations" - default n - depends on BUSYBOX_CONFIG_DEBUG - help - The compiler's optimization of source code can eliminate and reorder - code, resulting in an executable that's hard to understand when - stepping through it with a debugger. This switches it off, resulting - in a much bigger executable that more closely matches the source - code. - -config BUSYBOX_CONFIG_WERROR - bool "Abort compilation on any warning" - default n - help - Selecting this will add -Werror to gcc command line. - - Most people should answer N. - -choice - prompt "Additional debugging library" - default BUSYBOX_CONFIG_NO_DEBUG_LIB - help - Using an additional debugging library will make BusyBox become - considerable larger and will cause it to run more slowly. You - should always leave this option disabled for production use. - - dmalloc support: - ---------------- - This enables compiling with dmalloc ( http://dmalloc.com/ ) - which is an excellent public domain mem leak and malloc problem - detector. To enable dmalloc, before running busybox you will - want to properly set your environment, for example: - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - The 'debug=' value is generated using the following command - dmalloc -p log-stats -p log-non-free -p log-bad-space \ - -p log-elapsed-time -p check-fence -p check-heap \ - -p check-lists -p check-blank -p check-funcs -p realloc-copy \ - -p allow-free-null - - Electric-fence support: - ----------------------- - This enables compiling with Electric-fence support. Electric - fence is another very useful malloc debugging library which uses - your computer's virtual memory hardware to detect illegal memory - accesses. This support will make BusyBox be considerable larger - and run slower, so you should leave this option disabled unless - you are hunting a hard to find memory problem. - - -config BUSYBOX_CONFIG_NO_DEBUG_LIB - bool "None" - -config BUSYBOX_CONFIG_DMALLOC - bool "Dmalloc" - -config BUSYBOX_CONFIG_EFENCE - bool "Electric-fence" - -endchoice - -endmenu - -menu 'Installation Options ("make install" behavior)' - -choice - prompt "What kind of applet links to install" - default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS - help - Choose what kind of links to applets are created by "make install". - -config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS - bool "as soft-links" - help - Install applets as soft-links to the busybox binary. This needs some - free inodes on the filesystem, but might help with filesystem - generators that can't cope with hard-links. - -config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS - bool "as hard-links" - help - Install applets as hard-links to the busybox binary. This might - count on a filesystem with few inodes. - -config BUSYBOX_CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS - bool "as script wrappers" - help - Install applets as script wrappers that call the busybox binary. - -config BUSYBOX_CONFIG_INSTALL_APPLET_DONT - bool "not installed" - help - Do not install applet links. Useful when you plan to use - busybox --install for installing links, or plan to use - a standalone shell and thus don't need applet links. - -endchoice - -choice - prompt "/bin/sh applet link" - default BUSYBOX_CONFIG_INSTALL_SH_APPLET_SYMLINK - depends on BUSYBOX_CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS - help - Choose how you install /bin/sh applet link. - -config BUSYBOX_CONFIG_INSTALL_SH_APPLET_SYMLINK - bool "as soft-link" - help - Install /bin/sh applet as soft-link to the busybox binary. - -config BUSYBOX_CONFIG_INSTALL_SH_APPLET_HARDLINK - bool "as hard-link" - help - Install /bin/sh applet as hard-link to the busybox binary. - -config BUSYBOX_CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER - bool "as script wrapper" - help - Install /bin/sh applet as script wrapper that calls - the busybox binary. - -endchoice - -config BUSYBOX_CONFIG_PREFIX - string "BusyBox installation prefix" - default "./_install" - help - Define your directory to install BusyBox files/subdirs in. - -endmenu - -source package/utils/busybox/config/libbb/Config.in - -endmenu - -comment "Applets" - -source package/utils/busybox/config/archival/Config.in -source package/utils/busybox/config/coreutils/Config.in -source package/utils/busybox/config/console-tools/Config.in -source package/utils/busybox/config/debianutils/Config.in -source package/utils/busybox/config/editors/Config.in -source package/utils/busybox/config/findutils/Config.in -source package/utils/busybox/config/init/Config.in -source package/utils/busybox/config/loginutils/Config.in -source package/utils/busybox/config/e2fsprogs/Config.in -source package/utils/busybox/config/modutils/Config.in -source package/utils/busybox/config/util-linux/Config.in -source package/utils/busybox/config/miscutils/Config.in -source package/utils/busybox/config/networking/Config.in -source package/utils/busybox/config/printutils/Config.in -source package/utils/busybox/config/mailutils/Config.in -source package/utils/busybox/config/procps/Config.in -source package/utils/busybox/config/runit/Config.in -source package/utils/busybox/config/selinux/Config.in -source package/utils/busybox/config/shell/Config.in -source package/utils/busybox/config/sysklogd/Config.in diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in deleted file mode 100644 index d2bfa4848b..0000000000 --- a/package/utils/busybox/config/archival/Config.in +++ /dev/null @@ -1,380 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Archival Utilities" - - - -config BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ - bool "Make tar, rpm, modprobe etc understand .xz data" - default n - help - Make tar, rpm, modprobe etc understand .xz data. - -config BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA - bool "Make tar, rpm, modprobe etc understand .lzma data" - default n - help - Make tar, rpm, modprobe etc understand .lzma data. - -config BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 - bool "Make tar, rpm, modprobe etc understand .bz2 data" - default n - help - Make tar, rpm, modprobe etc understand .bz2 data. - -config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ - bool "Make tar, rpm, modprobe etc understand .gz data" - default y - help - Make tar, rpm, modprobe etc understand .gz data. - -config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z - bool "Make tar and gunzip understand .Z data" - default n - help - Make tar and gunzip understand .Z data. - -config BUSYBOX_CONFIG_AR - bool "ar" - default n # needs to be improved to be able to replace binutils ar - help - ar is an archival utility program used to create, modify, and - extract contents from archives. An archive is a single file holding - a collection of other files in a structure that makes it possible to - retrieve the original individual files (called archive members). - The original files' contents, mode (permissions), timestamp, owner, - and group are preserved in the archive, and can be restored on - extraction. - - The stored filename is limited to 15 characters. (for more information - see long filename support). - ar has 60 bytes of overheads for every stored file. - - This implementation of ar can extract archives, it cannot create or - modify them. - On an x86 system, the ar applet adds about 1K. - - Unless you have a specific application which requires ar, you should - probably say N here. - -config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES - bool "Support for long filenames (not needed for debs)" - default n - depends on BUSYBOX_CONFIG_AR - help - By default the ar format can only store the first 15 characters - of the filename, this option removes that limitation. - It supports the GNU ar long filename method which moves multiple long - filenames into a the data section of a new ar entry. - -config BUSYBOX_CONFIG_FEATURE_AR_CREATE - bool "Support archive creation" - default n - depends on BUSYBOX_CONFIG_AR - help - This enables archive creation (-c and -r) with busybox ar. - -config BUSYBOX_CONFIG_BUNZIP2 - bool "bunzip2" - default y - help - bunzip2 is a compression utility using the Burrows-Wheeler block - sorting text compression algorithm, and Huffman coding. Compression - is generally considerably better than that achieved by more - conventional LZ77/LZ78-based compressors, and approaches the - performance of the PPM family of statistical compressors. - - Unless you have a specific application which requires bunzip2, you - should probably say N here. - -config BUSYBOX_CONFIG_BZIP2 - bool "bzip2" - default n - help - bzip2 is a compression utility using the Burrows-Wheeler block - sorting text compression algorithm, and Huffman coding. Compression - is generally considerably better than that achieved by more - conventional LZ77/LZ78-based compressors, and approaches the - performance of the PPM family of statistical compressors. - - Unless you have a specific application which requires bzip2, you - should probably say N here. - -config BUSYBOX_CONFIG_CPIO - bool "cpio" - default n - help - cpio is an archival utility program used to create, modify, and - extract contents from archives. - cpio has 110 bytes of overheads for every stored file. - - This implementation of cpio can extract cpio archives created in the - "newc" or "crc" format, it cannot create or modify them. - - Unless you have a specific application which requires cpio, you - should probably say N here. - -config BUSYBOX_CONFIG_FEATURE_CPIO_O - bool "Support for archive creation" - default n - depends on BUSYBOX_CONFIG_CPIO - help - This implementation of cpio can create cpio archives in the "newc" - format only. - -config BUSYBOX_CONFIG_FEATURE_CPIO_P - bool "Support for passthrough mode" - default n - depends on BUSYBOX_CONFIG_FEATURE_CPIO_O - help - Passthrough mode. Rarely used. - -config BUSYBOX_CONFIG_DPKG - bool "dpkg" - default n - select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ - help - dpkg is a medium-level tool to install, build, remove and manage - Debian packages. - - This implementation of dpkg has a number of limitations, - you should use the official dpkg if possible. - -config BUSYBOX_CONFIG_DPKG_DEB - bool "dpkg_deb" - default n - select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ - help - dpkg-deb unpacks and provides information about Debian archives. - - This implementation of dpkg-deb cannot pack archives. - - Unless you have a specific application which requires dpkg-deb, - say N here. - -config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY - bool "Extract only (-x)" - default n - depends on BUSYBOX_CONFIG_DPKG_DEB - help - This reduces dpkg-deb to the equivalent of - "ar -p data.tar.gz | tar -zx". However it saves space as none - of the extra dpkg-deb, ar or tar options are needed, they are linked - to internally. - -config BUSYBOX_CONFIG_GUNZIP - bool "gunzip" - default y - help - gunzip is used to decompress archives created by gzip. - You can use the `-t' option to test the integrity of - an archive, without decompressing it. - -config BUSYBOX_CONFIG_GZIP - bool "gzip" - default y - help - gzip is used to compress files. - It's probably the most widely used UNIX compression program. - -config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_GZIP && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options, increases size by about 106 Bytes - -config BUSYBOX_CONFIG_LZOP - bool "lzop" - default n - help - Lzop compression/decompresion. - -config BUSYBOX_CONFIG_LZOP_COMPR_HIGH - bool "lzop compression levels 7,8,9 (not very useful)" - default n - depends on BUSYBOX_CONFIG_LZOP - help - High levels (7,8,9) of lzop compression. These levels - are actually slower than gzip at equivalent compression ratios - and take up 3.2K of code. - -config BUSYBOX_CONFIG_RPM2CPIO - bool "rpm2cpio" - default n - help - Converts a RPM file into a CPIO archive. - -config BUSYBOX_CONFIG_RPM - bool "rpm" - default n - help - Mini RPM applet - queries and extracts RPM packages. - -config BUSYBOX_CONFIG_TAR - bool "tar" - default y - help - tar is an archiving program. It's commonly used with gzip to - create compressed archives. It's probably the most widely used - UNIX archive program. - -config BUSYBOX_CONFIG_FEATURE_TAR_CREATE - bool "Enable archive creation" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to create - tar archives using the `-c' option. - -config BUSYBOX_CONFIG_FEATURE_TAR_AUTODETECT - bool "Autodetect compressed tarballs" - default n - depends on BUSYBOX_CONFIG_TAR && (BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z || BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ || BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA || BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ) - help - With this option tar can automatically detect compressed - tarballs. Currently it works only on files (not pipes etc). - -config BUSYBOX_CONFIG_FEATURE_TAR_FROM - bool "Enable -X (exclude from) and -T (include from) options)" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to specify - a list of files to include or exclude from an archive. - -config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY - bool "Support for old tar header format" - default n - depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG - help - This option is required to unpack archives created in - the old GNU format; help to kill this old format by - repacking your ancient archives with the new format. - -config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY - bool "Enable untarring of tarballs with checksums produced by buggy Sun tar" - default n - depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG - help - This option is required to unpack archives created by some old - version of Sun's tar (it was calculating checksum using signed - arithmetic). It is said to be fixed in newer Sun tar, but "old" - tarballs still exist. - -config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS - bool "Support for GNU tar extensions (long filenames)" - default y - depends on BUSYBOX_CONFIG_TAR || BUSYBOX_CONFIG_DPKG - help - With this option busybox supports GNU long filenames and - linknames. - -config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options, increases size by about 400 Bytes - -config BUSYBOX_CONFIG_FEATURE_TAR_TO_COMMAND - bool "Support for writing to an external program" - default n - depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS - help - If you enable this option you'll be able to instruct tar to send - the contents of each extracted file to the standard input of an - external program. - -config BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME - bool "Enable use of user and group names" - default n - depends on BUSYBOX_CONFIG_TAR - help - Enables use of user and group names in tar. This affects contents - listings (-t) and preserving permissions when unpacking (-p). - +200 bytes. - -config BUSYBOX_CONFIG_FEATURE_TAR_NOPRESERVE_TIME - bool "Enable -m (do not preserve time) option" - default n - depends on BUSYBOX_CONFIG_TAR - help - With this option busybox supports GNU tar -m - (do not preserve time) option. - -config BUSYBOX_CONFIG_FEATURE_TAR_SELINUX - bool "Support for extracting SELinux labels" - default n - depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_SELINUX - help - With this option busybox supports restoring SELinux labels - when extracting files from tar archives. - -config BUSYBOX_CONFIG_UNCOMPRESS - bool "uncompress" - default n - help - uncompress is used to decompress archives created by compress. - Not much used anymore, replaced by gzip/gunzip. - -config BUSYBOX_CONFIG_UNLZMA - bool "unlzma" - default n - help - unlzma is a compression utility using the Lempel-Ziv-Markov chain - compression algorithm, and range coding. Compression - is generally considerably better than that achieved by the bzip2 - compressors. - - The BusyBox unlzma applet is limited to de-compression only. - On an x86 system, this applet adds about 4K. - - Unless you have a specific application which requires unlzma, you - should probably say N here. - -config BUSYBOX_CONFIG_FEATURE_LZMA_FAST - bool "Optimize unlzma for speed" - default n - depends on BUSYBOX_CONFIG_UNLZMA - help - This option reduces decompression time by about 25% at the cost of - a 1K bigger binary. - -config BUSYBOX_CONFIG_LZMA - bool "Provide lzma alias which supports only unpacking" - default n - depends on BUSYBOX_CONFIG_UNLZMA - help - Enable this option if you want commands like "lzma -d" to work. - IOW: you'll get lzma applet, but it will always require -d option. - -config BUSYBOX_CONFIG_UNXZ - bool "unxz" - default n - help - unxz is a unlzma successor. - -config BUSYBOX_CONFIG_XZ - bool "Provide xz alias which supports only unpacking" - default n - depends on BUSYBOX_CONFIG_UNXZ - help - Enable this option if you want commands like "xz -d" to work. - IOW: you'll get xz applet, but it will always require -d option. - -config BUSYBOX_CONFIG_UNZIP - bool "unzip" - default n - help - unzip will list or extract files from a ZIP archive, - commonly found on DOS/WIN systems. The default behavior - (with no options) is to extract the archive into the - current directory. Use the `-d' option to extract to a - directory of your choice. - -endmenu diff --git a/package/utils/busybox/config/console-tools/Config.in b/package/utils/busybox/config/console-tools/Config.in deleted file mode 100644 index 9069b0f1a1..0000000000 --- a/package/utils/busybox/config/console-tools/Config.in +++ /dev/null @@ -1,177 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Console Utilities" - - - -config BUSYBOX_CONFIG_CHVT - bool "chvt" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program is used to change to another terminal. - Example: chvt 4 (change to terminal /dev/tty4) - -config BUSYBOX_CONFIG_FGCONSOLE - bool "fgconsole" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program prints active (foreground) console number. - -config BUSYBOX_CONFIG_CLEAR - bool "clear" - default y - help - This program clears the terminal screen. - -config BUSYBOX_CONFIG_DEALLOCVT - bool "deallocvt" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program deallocates unused virtual consoles. - -config BUSYBOX_CONFIG_DUMPKMAP - bool "dumpkmap" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program dumps the kernel's keyboard translation table to - stdout, in binary format. You can then use loadkmap to load it. - -config BUSYBOX_CONFIG_KBD_MODE - bool "kbd_mode" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program reports and sets keyboard mode. - -config BUSYBOX_CONFIG_LOADFONT - bool "loadfont" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program loads a console font from standard input. - -config BUSYBOX_CONFIG_LOADKMAP - bool "loadkmap" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program loads a keyboard translation table from - standard input. - -config BUSYBOX_CONFIG_OPENVT - bool "openvt" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program is used to start a command on an unused - virtual terminal. - -config BUSYBOX_CONFIG_RESET - bool "reset" - default y - help - This program is used to reset the terminal screen, if it - gets messed up. - -config BUSYBOX_CONFIG_RESIZE - bool "resize" - default n - help - This program is used to (re)set the width and height of your current - terminal. - -config BUSYBOX_CONFIG_FEATURE_RESIZE_PRINT - bool "Print environment variables" - default n - depends on BUSYBOX_CONFIG_RESIZE - help - Prints the newly set size (number of columns and rows) of - the terminal. - E.g.: - COLUMNS=80;LINES=44;export COLUMNS LINES; - -config BUSYBOX_CONFIG_SETCONSOLE - bool "setconsole" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program redirects the system console to another device, - like the current tty while logged in via telnet. - -config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_SETCONSOLE && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the setconsole applet. - -config BUSYBOX_CONFIG_SETFONT - bool "setfont" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Allows to load console screen map. Useful for i18n. - -config BUSYBOX_CONFIG_FEATURE_SETFONT_TEXTUAL_MAP - bool "Support reading textual screen maps" - default n - depends on BUSYBOX_CONFIG_SETFONT - help - Support reading textual screen maps. - -config BUSYBOX_CONFIG_DEFAULT_SETFONT_DIR - string "Default directory for console-tools files" - default "" - depends on BUSYBOX_CONFIG_SETFONT - help - Directory to use if setfont's params are simple filenames - (not /path/to/file or ./file). Default is "" (no default directory). - -config BUSYBOX_CONFIG_SETKEYCODES - bool "setkeycodes" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program loads entries into the kernel's scancode-to-keycode - map, allowing unusual keyboards to generate usable keycodes. - -config BUSYBOX_CONFIG_SETLOGCONS - bool "setlogcons" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This program redirects the output console of kernel messages. - -config BUSYBOX_CONFIG_SHOWKEY - bool "showkey" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Shows keys pressed. - -comment "Common options for loadfont and setfont" - depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT - -config BUSYBOX_CONFIG_FEATURE_LOADFONT_PSF2 - bool "Support for PSF2 console fonts" - default n - depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT - help - Support PSF2 console fonts. - -config BUSYBOX_CONFIG_FEATURE_LOADFONT_RAW - bool "Support for old (raw) console fonts" - default n - depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT - help - Support old (raw) console fonts. - -endmenu diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in deleted file mode 100644 index 33a5e25e62..0000000000 --- a/package/utils/busybox/config/coreutils/Config.in +++ /dev/null @@ -1,913 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Coreutils" - -config BUSYBOX_CONFIG_BASENAME - bool "basename" - default y - help - basename is used to strip the directory and suffix from filenames, - leaving just the filename itself. Enable this option if you wish - to enable the 'basename' utility. -config BUSYBOX_CONFIG_CAT - bool "cat" - default y - help - cat is used to concatenate files and print them to the standard - output. Enable this option if you wish to enable the 'cat' utility. -config BUSYBOX_CONFIG_DATE - bool "date" - default y - help - date is used to set the system date or display the - current time in the given format. - -config BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT - bool "Enable ISO date format output (-I)" - default y - depends on BUSYBOX_CONFIG_DATE - help - Enable option (-I) to output an ISO-8601 compliant - date/time string. - -# defaults to "no": stat's nanosecond field is a bit non-portable -config BUSYBOX_CONFIG_FEATURE_DATE_NANO - bool "Support %[num]N nanosecond format specifier" - default n - depends on BUSYBOX_CONFIG_DATE # syscall(__NR_clock_gettime) - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support %[num]N format specifier. Adds ~250 bytes of code. - -config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT - bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format" - default n - depends on BUSYBOX_CONFIG_DATE - help - System time can be set by 'date -s DATE' and simply 'date DATE', - but formats of DATE string are different. 'date DATE' accepts - a rather weird MMDDhhmm[[YY]YY][.ss] format with completely - unnatural placement of year between minutes and seconds. - date -s (and other commands like touch -d) use more sensible - formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss). - - With this option off, 'date DATE' is 'date -s DATE' support - the same format. With it on, 'date DATE' additionally supports - MMDDhhmm[[YY]YY][.ss] format. -config BUSYBOX_CONFIG_ID - bool "id" - default y - help - id displays the current user and group ID names. -config BUSYBOX_CONFIG_GROUPS - bool "groups" - default n - help - Print the group names associated with current user id. -config BUSYBOX_CONFIG_TEST - bool "test" - default y - help - test is used to check file types and compare values, - returning an appropriate exit code. The bash shell - has test built in, ash can build it in optionally. - -config BUSYBOX_CONFIG_FEATURE_TEST_64 - bool "Extend test to 64 bit" - default y - depends on BUSYBOX_CONFIG_TEST || BUSYBOX_CONFIG_ASH_BUILTIN_TEST || BUSYBOX_CONFIG_HUSH - help - Enable 64-bit support in test. -config BUSYBOX_CONFIG_TOUCH - bool "touch" - default y - help - touch is used to create or change the access and/or - modification timestamp of specified files. -config BUSYBOX_CONFIG_TR - bool "tr" - default y - help - tr is used to squeeze, and/or delete characters from standard - input, writing to standard output. - -config BUSYBOX_CONFIG_FEATURE_TR_CLASSES - bool "Enable character classes (such as [:upper:])" - default n - depends on BUSYBOX_CONFIG_TR - help - Enable character classes, enabling commands such as: - tr [:upper:] [:lower:] to convert input into lowercase. - -config BUSYBOX_CONFIG_FEATURE_TR_EQUIV - bool "Enable equivalence classes" - default n - depends on BUSYBOX_CONFIG_TR - help - Enable equivalence classes, which essentially add the enclosed - character to the current set. For instance, tr [=a=] xyz would - replace all instances of 'a' with 'xyz'. This option is mainly - useful for cases when no other way of expressing a character - is possible. -config BUSYBOX_CONFIG_BASE64 - bool "base64" - default n - help - Base64 encode and decode -config BUSYBOX_CONFIG_WHO - bool "who" - default n - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - who is used to show who is logged on. -config BUSYBOX_CONFIG_USERS - bool "users" - default n - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - Print users currently logged on. - -config BUSYBOX_CONFIG_CAL - bool "cal" - default n - help - cal is used to display a monthly calender. - -config BUSYBOX_CONFIG_CATV - bool "catv" - default n - help - Display nonprinting characters as escape sequences (like some - implementations' cat -v option). - -config BUSYBOX_CONFIG_CHGRP - bool "chgrp" - default y - help - chgrp is used to change the group ownership of files. - -config BUSYBOX_CONFIG_CHMOD - bool "chmod" - default y - help - chmod is used to change the access permission of files. - -config BUSYBOX_CONFIG_CHOWN - bool "chown" - default y - help - chown is used to change the user and/or group ownership - of files. - -config BUSYBOX_CONFIG_FEATURE_CHOWN_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_CHOWN && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options - -config BUSYBOX_CONFIG_CHROOT - bool "chroot" - default y - help - chroot is used to change the root directory and run a command. - The default command is `/bin/sh'. - -config BUSYBOX_CONFIG_CKSUM - bool "cksum" - default n - help - cksum is used to calculate the CRC32 checksum of a file. - -config BUSYBOX_CONFIG_COMM - bool "comm" - default n - help - comm is used to compare two files line by line and return - a three-column output. - -config BUSYBOX_CONFIG_CP - bool "cp" - default y - help - cp is used to copy files and directories. - -config BUSYBOX_CONFIG_FEATURE_CP_LONG_OPTIONS - bool "Enable long options for cp" - default n - depends on BUSYBOX_CONFIG_CP && BUSYBOX_CONFIG_LONG_OPTS - help - Enable long options for cp. - Also add support for --parents option. - -config BUSYBOX_CONFIG_CUT - bool "cut" - default y - help - cut is used to print selected parts of lines from - each file to stdout. - -config BUSYBOX_CONFIG_DD - bool "dd" - default y - help - dd copies a file (from standard input to standard output, - by default) using specific input and output blocksizes, - while optionally performing conversions on it. - -config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING - bool "Enable DD signal handling for status reporting" - default y - depends on BUSYBOX_CONFIG_DD - help - Sending a SIGUSR1 signal to a running `dd' process makes it - print to standard error the number of records read and written - so far, then to resume copying. - - $ dd if=/dev/zero of=/dev/null& - $ pid=$! kill -USR1 $pid; sleep 1; kill $pid - 10899206+0 records in - 10899206+0 records out - -config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE - bool "Enable the third status line upon signal" - default n - depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING - help - Displays a coreutils-like third status line with transferred bytes, - elapsed time and speed. - -config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS - bool "Enable ibs, obs and conv options" - default y - depends on BUSYBOX_CONFIG_DD - help - Enables support for writing a certain number of bytes in and out, - at a time, and performing conversions on the data stream. - -config BUSYBOX_CONFIG_DF - bool "df" - default y - help - df reports the amount of disk space used and available - on filesystems. - -config BUSYBOX_CONFIG_FEATURE_DF_FANCY - bool "Enable -a, -i, -B" - default n - depends on BUSYBOX_CONFIG_DF - help - This option enables -a, -i and -B. - - -a Show all filesystems - -i Inodes - -B Blocksize - -config BUSYBOX_CONFIG_DIRNAME - bool "dirname" - default y - help - dirname is used to strip a non-directory suffix from - a file name. - -config BUSYBOX_CONFIG_DOS2UNIX - bool "dos2unix/unix2dos" - default n - help - dos2unix is used to convert a text file from DOS format to - UNIX format, and vice versa. - -config BUSYBOX_CONFIG_UNIX2DOS - bool - default n - depends on BUSYBOX_CONFIG_DOS2UNIX - help - unix2dos is used to convert a text file from UNIX format to - DOS format, and vice versa. - -config BUSYBOX_CONFIG_DU - bool "du (default blocksize of 512 bytes)" - default y - help - du is used to report the amount of disk space used - for specified files. - -config BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K - bool "Use a default blocksize of 1024 bytes (1K)" - default y - depends on BUSYBOX_CONFIG_DU - help - Use a blocksize of (1K) instead of the default 512b. - -config BUSYBOX_CONFIG_ECHO - bool "echo (basic SuSv3 version taking no options)" - default y - help - echo is used to print a specified string to stdout. - -# this entry also appears in shell/Config.in, next to the echo builtin -config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO - bool "Enable echo options (-n and -e)" - default y - depends on BUSYBOX_CONFIG_ECHO || BUSYBOX_CONFIG_ASH_BUILTIN_ECHO || BUSYBOX_CONFIG_HUSH - help - This adds options (-n and -e) to echo. - -config BUSYBOX_CONFIG_ENV - bool "env" - default y - help - env is used to set an environment variable and run - a command; without options it displays the current - environment. - -config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_ENV && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the env applet. - -config BUSYBOX_CONFIG_EXPAND - bool "expand" - default n - help - By default, convert all tabs to spaces. - -config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_EXPAND && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the expand applet. - -config BUSYBOX_CONFIG_EXPR - bool "expr" - default y - help - expr is used to calculate numbers and print the result - to standard output. - -config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64 - bool "Extend Posix numbers support to 64 bit" - default y - depends on BUSYBOX_CONFIG_EXPR - help - Enable 64-bit math support in the expr applet. This will make - the applet slightly larger, but will allow computation with very - large numbers. - -config BUSYBOX_CONFIG_FALSE - bool "false" - default y - help - false returns an exit code of FALSE (1). - -config BUSYBOX_CONFIG_FOLD - bool "fold" - default n - help - Wrap text to fit a specific width. - -config BUSYBOX_CONFIG_FSYNC - bool "fsync" - default y - help - fsync is used to flush file-related cached blocks to disk. - -config BUSYBOX_CONFIG_HEAD - bool "head" - default y - help - head is used to print the first specified number of lines - from files. - -config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD - bool "Enable head options (-c, -q, and -v)" - default y - depends on BUSYBOX_CONFIG_HEAD - help - This enables the head options (-c, -q, and -v). - -config BUSYBOX_CONFIG_HOSTID - bool "hostid" - default y - help - hostid prints the numeric identifier (in hexadecimal) for - the current host. - -config BUSYBOX_CONFIG_INSTALL - bool "install" - default n - help - Copy files and set attributes. - -config BUSYBOX_CONFIG_FEATURE_INSTALL_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_INSTALL && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the install applet. - -####config LENGTH -#### bool "length" -#### default y -#### help -#### length is used to print out the length of a specified string. - -config BUSYBOX_CONFIG_LN - bool "ln" - default y - help - ln is used to create hard or soft links between files. - -config BUSYBOX_CONFIG_LOGNAME - bool "logname" - default n - help - logname is used to print the current user's login name. - -config BUSYBOX_CONFIG_LS - bool "ls" - default y - help - ls is used to list the contents of directories. - -config BUSYBOX_CONFIG_FEATURE_LS_FILETYPES - bool "Enable filetyping options (-p and -F)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls options (-p and -F). - -config BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS - bool "Enable symlinks dereferencing (-L)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-L). - -config BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE - bool "Enable recursion (-R)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-R). - -config BUSYBOX_CONFIG_FEATURE_LS_SORTFILES - bool "Sort the file names" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to sort file names alphabetically. - -config BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS - bool "Show file timestamps" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to display timestamps for files. - -config BUSYBOX_CONFIG_FEATURE_LS_USERNAME - bool "Show username/groupnames" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to display username/groupname for files. - -config BUSYBOX_CONFIG_FEATURE_LS_COLOR - bool "Allow use of color to identify file types" - default y - depends on BUSYBOX_CONFIG_LS && BUSYBOX_CONFIG_LONG_OPTS - help - This enables the --color option to ls. - -config BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT - bool "Produce colored ls output by default" - default y - depends on BUSYBOX_CONFIG_FEATURE_LS_COLOR - help - Saying yes here will turn coloring on by default, - even if no "--color" option is given to the ls command. - This is not recommended, since the colors are not - configurable, and the output may not be legible on - many output screens. - -config BUSYBOX_CONFIG_MD5SUM - bool "md5sum" - default y - help - md5sum is used to print or check MD5 checksums. - -config BUSYBOX_CONFIG_MKDIR - bool "mkdir" - default y - help - mkdir is used to create directories with the specified names. - -config BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_MKDIR && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the mkdir applet. - -config BUSYBOX_CONFIG_MKFIFO - bool "mkfifo" - default y - help - mkfifo is used to create FIFOs (named pipes). - The `mknod' program can also create FIFOs. - -config BUSYBOX_CONFIG_MKNOD - bool "mknod" - default y - help - mknod is used to create FIFOs or block/character special - files with the specified names. - -config BUSYBOX_CONFIG_MV - bool "mv" - default y - help - mv is used to move or rename files or directories. - -config BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_MV && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the mv applet. - -config BUSYBOX_CONFIG_NICE - bool "nice" - default y - help - nice runs a program with modified scheduling priority. - -config BUSYBOX_CONFIG_NOHUP - bool "nohup" - default n - help - run a command immune to hangups, with output to a non-tty. - -config BUSYBOX_CONFIG_OD - bool "od" - default n - help - od is used to dump binary files in octal and other formats. - -config BUSYBOX_CONFIG_PRINTENV - bool "printenv" - default n - help - printenv is used to print all or part of environment. - -config BUSYBOX_CONFIG_PRINTF - bool "printf" - default y - help - printf is used to format and print specified strings. - It's similar to `echo' except it has more options. - -config BUSYBOX_CONFIG_PWD - bool "pwd" - default y - help - pwd is used to print the current directory. - -config BUSYBOX_CONFIG_READLINK - bool "readlink" - default y - help - This program reads a symbolic link and returns the name - of the file it points to - -config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW - bool "Enable canonicalization by following all symlinks (-f)" - default y - depends on BUSYBOX_CONFIG_READLINK - help - Enable the readlink option (-f). - -config BUSYBOX_CONFIG_REALPATH - bool "realpath" - default n - help - Return the canonicalized absolute pathname. - This isn't provided by GNU shellutils, but where else does it belong. - -config BUSYBOX_CONFIG_RM - bool "rm" - default y - help - rm is used to remove files or directories. - -config BUSYBOX_CONFIG_RMDIR - bool "rmdir" - default y - help - rmdir is used to remove empty directories. - -config BUSYBOX_CONFIG_FEATURE_RMDIR_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_RMDIR && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the rmdir applet, including - --ignore-fail-on-non-empty for compatibility with GNU rmdir. - -config BUSYBOX_CONFIG_SEQ - bool "seq" - default y - help - print a sequence of numbers - -config BUSYBOX_CONFIG_SHA1SUM - bool "sha1sum" - default n - help - Compute and check SHA1 message digest - -config BUSYBOX_CONFIG_SHA256SUM - bool "sha256sum" - default n - help - Compute and check SHA256 message digest - -config BUSYBOX_CONFIG_SHA512SUM - bool "sha512sum" - default n - help - Compute and check SHA512 message digest - -config BUSYBOX_CONFIG_SLEEP - bool "sleep" - default y - help - sleep is used to pause for a specified number of seconds. - It comes in 3 versions: - - small: takes one integer parameter - - fancy: takes multiple integer arguments with suffixes: - sleep 1d 2h 3m 15s - - fancy with fractional numbers: - sleep 2.3s 4.5h sleeps for 16202.3 seconds - Last one is "the most compatible" with coreutils sleep, - but it adds around 1k of code. - -config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP - bool "Enable multiple arguments and s/m/h/d suffixes" - default y - depends on BUSYBOX_CONFIG_SLEEP - help - Allow sleep to pause for specified minutes, hours, and days. - -config BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP - bool "Enable fractional arguments" - default n - depends on BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP - help - Allow for fractional numeric parameters. - -config BUSYBOX_CONFIG_SORT - bool "sort" - default y - help - sort is used to sort lines of text in specified files. - -config BUSYBOX_CONFIG_FEATURE_SORT_BIG - bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)" - default n - depends on BUSYBOX_CONFIG_SORT - help - Without this, sort only supports -r, -u, and an integer version - of -n. Selecting this adds sort keys, floating point support, and - more. This adds a little over 3k to a nonstatic build on x86. - - The SuSv3 sort standard is available at: - http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html - -config BUSYBOX_CONFIG_SPLIT - bool "split" - default n - help - split a file into pieces. - -config BUSYBOX_CONFIG_FEATURE_SPLIT_FANCY - bool "Fancy extensions" - default n - depends on BUSYBOX_CONFIG_SPLIT - help - Add support for features not required by SUSv3. - Supports additional suffixes 'b' for 512 bytes, - 'g' for 1GiB for the -b option. - -config BUSYBOX_CONFIG_STAT - bool "stat" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX # statfs() - help - display file or filesystem status. - -config BUSYBOX_CONFIG_FEATURE_STAT_FORMAT - bool "Enable custom formats (-c)" - default n - depends on BUSYBOX_CONFIG_STAT - help - Without this, stat will not support the '-c format' option where - users can pass a custom format string for output. This adds about - 7k to a nonstatic build on amd64. - -config BUSYBOX_CONFIG_STTY - bool "stty" - default n - help - stty is used to change and print terminal line settings. - -config BUSYBOX_CONFIG_SUM - bool "sum" - default n - help - checksum and count the blocks in a file - -config BUSYBOX_CONFIG_SYNC - bool "sync" - default y - help - sync is used to flush filesystem buffers. - -config BUSYBOX_CONFIG_TAC - bool "tac" - default n - help - tac is used to concatenate and print files in reverse. - -config BUSYBOX_CONFIG_TAIL - bool "tail" - default y - help - tail is used to print the last specified number of lines - from files. - -config BUSYBOX_CONFIG_FEATURE_FANCY_TAIL - bool "Enable extra tail options (-q, -s, -v, and -F)" - default y - depends on BUSYBOX_CONFIG_TAIL - help - The options (-q, -s, and -v) are provided by GNU tail, but - are not specific in the SUSv3 standard. - - -q Never output headers giving file names - -s SEC Wait SEC seconds between reads with -f - -v Always output headers giving file names - -config BUSYBOX_CONFIG_TEE - bool "tee" - default y - help - tee is used to read from standard input and write - to standard output and files. - -config BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO - bool "Enable block I/O (larger/faster) instead of byte I/O" - default y - depends on BUSYBOX_CONFIG_TEE - help - Enable this option for a faster tee, at expense of size. - -config BUSYBOX_CONFIG_TRUE - bool "true" - default y - help - true returns an exit code of TRUE (0). - -config BUSYBOX_CONFIG_TTY - bool "tty" - default n - help - tty is used to print the name of the current terminal to - standard output. - -config BUSYBOX_CONFIG_UNAME - bool "uname" - default y - help - uname is used to print system information. - -config BUSYBOX_CONFIG_UNEXPAND - bool "unexpand" - default n - help - By default, convert only leading sequences of blanks to tabs. - -config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_UNEXPAND && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the unexpand applet. - -config BUSYBOX_CONFIG_UNIQ - bool "uniq" - default y - help - uniq is used to remove duplicate lines from a sorted file. - -config BUSYBOX_CONFIG_USLEEP - bool "usleep" - default n - help - usleep is used to pause for a specified number of microseconds. - -config BUSYBOX_CONFIG_UUDECODE - bool "uudecode" - default n - help - uudecode is used to decode a uuencoded file. - -config BUSYBOX_CONFIG_UUENCODE - bool "uuencode" - default n - help - uuencode is used to uuencode a file. - -config BUSYBOX_CONFIG_WC - bool "wc" - default y - help - wc is used to print the number of bytes, words, and lines, - in specified files. - -config BUSYBOX_CONFIG_FEATURE_WC_LARGE - bool "Support very large files in wc" - default n - depends on BUSYBOX_CONFIG_WC - help - Use "unsigned long long" in wc for counter variables. - -config BUSYBOX_CONFIG_WHOAMI - bool "whoami" - default n - help - whoami is used to print the username of the current - user id (same as id -un). - -config BUSYBOX_CONFIG_YES - bool "yes" - default y - help - yes is used to repeatedly output a specific string, or - the default string `y'. - -comment "Common options for cp and mv" - depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV - -config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS - bool "Preserve hard links" - default y - depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV - help - Allow cp and mv to preserve hard links. - -comment "Common options for ls, more and telnet" - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - -config BUSYBOX_CONFIG_FEATURE_AUTOWIDTH - bool "Calculate terminal & column widths" - default y - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - help - This option allows utilities such as 'ls', 'more' and 'telnet' - to determine the width of the screen, which can allow them to - display additional text or avoid wrapping text onto the next line. - If you leave this disabled, your utilities will be especially - primitive and will be unable to determine the current screen width. - -comment "Common options for df, du, ls" - depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS - -config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE - bool "Support for human readable output (example 13k, 23M, 235G)" - default y - depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS - help - Allow df, du, and ls to have human readable output. - -comment "Common options for md5sum, sha1sum, sha256sum, sha512sum" - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM - -config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK - bool "Enable -c, -s and -w options" - default y - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM - help - Enabling the -c options allows files to be checked - against pre-calculated hash values. - - -s and -w are useful options when verifying checksums. - -endmenu diff --git a/package/utils/busybox/config/debianutils/Config.in b/package/utils/busybox/config/debianutils/Config.in deleted file mode 100644 index be69666fff..0000000000 --- a/package/utils/busybox/config/debianutils/Config.in +++ /dev/null @@ -1,86 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Debian Utilities" - - - -config BUSYBOX_CONFIG_MKTEMP - bool "mktemp" - default y - help - mktemp is used to create unique temporary files - -config BUSYBOX_CONFIG_PIPE_PROGRESS - bool "pipe_progress" - default n - help - Display a dot to indicate pipe activity. - -config BUSYBOX_CONFIG_RUN_PARTS - bool "run-parts" - default n - help - run-parts is a utility designed to run all the scripts in a directory. - - It is useful to set up a directory like cron.daily, where you need to - execute all the scripts in that directory. - - In this implementation of run-parts some features (such as report - mode) are not implemented. - - Unless you know that run-parts is used in some of your scripts - you can safely say N here. - -config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_RUN_PARTS && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the run-parts applet. - -config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY - bool "Support additional arguments" - default n - depends on BUSYBOX_CONFIG_RUN_PARTS - help - Support additional options: - -l --list print the names of the all matching files (not - limited to executables), but don't actually run them. - -config BUSYBOX_CONFIG_START_STOP_DAEMON - bool "start-stop-daemon" - default y - help - start-stop-daemon is used to control the creation and - termination of system-level processes, usually the ones - started during the startup of the system. - -config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_FANCY - bool "Support additional arguments" - default n - depends on BUSYBOX_CONFIG_START_STOP_DAEMON - help - Support additional arguments. - -o|--oknodo ignored since we exit with 0 anyway - -v|--verbose - -N|--nicelevel N - -config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_START_STOP_DAEMON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the start-stop-daemon applet. - -config BUSYBOX_CONFIG_WHICH - bool "which" - default y - help - which is used to find programs in your PATH and - print out their pathnames. - -endmenu diff --git a/package/utils/busybox/config/default b/package/utils/busybox/config/default new file mode 100644 index 0000000000..1462540f85 --- /dev/null +++ b/package/utils/busybox/config/default @@ -0,0 +1,869 @@ +# CONFIG_ACPID is not set +# CONFIG_ADDGROUP is not set +# CONFIG_ADDUSER is not set +# CONFIG_ADD_SHELL is not set +# CONFIG_ADJTIMEX is not set +# CONFIG_AR is not set +# CONFIG_ARP is not set +CONFIG_ARPING=y +CONFIG_ASH=y +CONFIG_ASH_ALIAS=y +CONFIG_ASH_BASH_COMPAT=y +CONFIG_ASH_BUILTIN_ECHO=y +CONFIG_ASH_BUILTIN_PRINTF=y +CONFIG_ASH_BUILTIN_TEST=y +CONFIG_ASH_CMDCMD=y +CONFIG_ASH_EXPAND_PRMT=y +CONFIG_ASH_GETOPTS=y +# CONFIG_ASH_IDLE_TIMEOUT is not set +CONFIG_ASH_JOB_CONTROL=y +# CONFIG_ASH_MAIL is not set +# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set +# CONFIG_ASH_RANDOM_SUPPORT is not set +CONFIG_AWK=y +# CONFIG_BASE64 is not set +CONFIG_BASENAME=y +# CONFIG_BBCONFIG is not set +CONFIG_BB_SYSCTL=y +# CONFIG_BEEP is not set +# CONFIG_BLKID is not set +# CONFIG_BLOCKDEV is not set +# CONFIG_BOOTCHARTD is not set +CONFIG_BRCTL=y +# CONFIG_BUILD_LIBBUSYBOX is not set +CONFIG_BUNZIP2=y +CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" +# CONFIG_BZIP2 is not set +# CONFIG_CAL is not set +CONFIG_CAT=y +# CONFIG_CATV is not set +# CONFIG_CHAT is not set +# CONFIG_CHATTR is not set +# CONFIG_CHCON is not set +CONFIG_CHGRP=y +CONFIG_CHMOD=y +CONFIG_CHOWN=y +# CONFIG_CHPASSWD is not set +# CONFIG_CHPST is not set +CONFIG_CHROOT=y +# CONFIG_CHRT is not set +# CONFIG_CHVT is not set +# CONFIG_CKSUM is not set +CONFIG_CLEAR=y +CONFIG_CMP=y +# CONFIG_COMM is not set +# CONFIG_CONSPY is not set +CONFIG_CP=y +# CONFIG_CPIO is not set +CONFIG_CROND=y +CONFIG_CRONTAB=y +CONFIG_CROSS_COMPILER_PREFIX="" +# CONFIG_CRYPTPW is not set +# CONFIG_CTTYHACK is not set +CONFIG_CUT=y +CONFIG_DATE=y +# CONFIG_DC is not set +CONFIG_DD=y +# CONFIG_DEALLOCVT is not set +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_PESSIMIZE is not set +CONFIG_DEFAULT_DEPMOD_FILE="" +CONFIG_DEFAULT_MODULES_DIR="/lib/modules" +CONFIG_DEFAULT_SETFONT_DIR="" +# CONFIG_DELGROUP is not set +# CONFIG_DELUSER is not set +# CONFIG_DEPMOD is not set +# CONFIG_DESKTOP is not set +# CONFIG_DEVFSD is not set +# CONFIG_DEVFSD_FG_NP is not set +# CONFIG_DEVFSD_MODLOAD is not set +# CONFIG_DEVFSD_VERBOSE is not set +# CONFIG_DEVMEM is not set +CONFIG_DF=y +CONFIG_DHCPD_LEASES_FILE="" +# CONFIG_DHCPRELAY is not set +# CONFIG_DIFF is not set +CONFIG_DIRNAME=y +# CONFIG_DMALLOC is not set +CONFIG_DMESG=y +# CONFIG_DNSD is not set +# CONFIG_DOS2UNIX is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +CONFIG_DU=y +# CONFIG_DUMPKMAP is not set +# CONFIG_DUMPLEASES is not set +CONFIG_ECHO=y +# CONFIG_ED is not set +# CONFIG_EFENCE is not set +# CONFIG_EJECT is not set +CONFIG_ENV=y +# CONFIG_ENVDIR is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_EXPAND is not set +CONFIG_EXPR=y +CONFIG_EXPR_MATH_SUPPORT_64=y +CONFIG_EXTRA_CFLAGS="" +# CONFIG_EXTRA_COMPAT is not set +# CONFIG_FAKEIDENTD is not set +CONFIG_FALSE=y +# CONFIG_FBSET is not set +# CONFIG_FBSPLASH is not set +# CONFIG_FDFLUSH is not set +# CONFIG_FDFORMAT is not set +# CONFIG_FDISK is not set +# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set +# CONFIG_FEATURE_2_4_MODULES is not set +# CONFIG_FEATURE_ACPID_COMPAT is not set +# CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS is not set +# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set +# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set +# CONFIG_FEATURE_AIX_LABEL is not set +CONFIG_FEATURE_ALLOW_EXEC=y +# CONFIG_FEATURE_AR_CREATE is not set +# CONFIG_FEATURE_AR_LONG_FILENAMES is not set +CONFIG_FEATURE_AUTOWIDTH=y +CONFIG_FEATURE_AWK_LIBM=y +# CONFIG_FEATURE_BASH_IS_ASH is not set +# CONFIG_FEATURE_BASH_IS_HUSH is not set +CONFIG_FEATURE_BASH_IS_NONE=y +CONFIG_FEATURE_BEEP_FREQ=0 +CONFIG_FEATURE_BEEP_LENGTH_MS=0 +# CONFIG_FEATURE_BLKID_TYPE is not set +# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set +# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set +CONFIG_FEATURE_BRCTL_FANCY=y +CONFIG_FEATURE_BRCTL_SHOW=y +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y +# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set +# CONFIG_FEATURE_CALL_TELINIT is not set +# CONFIG_FEATURE_CHAT_CLR_ABORT is not set +# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set +# CONFIG_FEATURE_CHAT_NOFAIL is not set +# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set +# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set +# CONFIG_FEATURE_CHAT_TTY_HIFI is not set +# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_FEATURE_CHECK_NAMES is not set +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set +# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set +# CONFIG_FEATURE_CLEAN_UP is not set +# CONFIG_FEATURE_COMPRESS_BBCONFIG is not set +CONFIG_FEATURE_COMPRESS_USAGE=y +CONFIG_FEATURE_COPYBUF_KB=4 +# CONFIG_FEATURE_CPIO_O is not set +# CONFIG_FEATURE_CPIO_P is not set +# CONFIG_FEATURE_CP_LONG_OPTIONS is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_FEATURE_CROND_D is not set +CONFIG_FEATURE_CROND_DIR="/var/spool/cron" +# CONFIG_FEATURE_DATE_COMPAT is not set +CONFIG_FEATURE_DATE_ISOFMT=y +# CONFIG_FEATURE_DATE_NANO is not set +# CONFIG_FEATURE_DC_LIBM is not set +CONFIG_FEATURE_DD_IBS_OBS=y +CONFIG_FEATURE_DD_SIGNAL_HANDLING=y +# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set +# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set +# CONFIG_FEATURE_DEVFS is not set +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_DF_FANCY is not set +# CONFIG_FEATURE_DIFF_DIR is not set +# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set +CONFIG_FEATURE_DMESG_PRETTY=y +# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set +CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y +CONFIG_FEATURE_EDITING=y +# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set +CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +CONFIG_FEATURE_EDITING_HISTORY=256 +CONFIG_FEATURE_EDITING_MAX_LEN=512 +# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set +# CONFIG_FEATURE_EDITING_VI is not set +# CONFIG_FEATURE_EJECT_SCSI is not set +# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set +# CONFIG_FEATURE_ETC_NETWORKS is not set +# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set +# CONFIG_FEATURE_EXTRA_QUIET is not set +CONFIG_FEATURE_FANCY_ECHO=y +CONFIG_FEATURE_FANCY_HEAD=y +CONFIG_FEATURE_FANCY_PING=y +CONFIG_FEATURE_FANCY_SLEEP=y +CONFIG_FEATURE_FANCY_TAIL=y +CONFIG_FEATURE_FAST_TOP=y +# CONFIG_FEATURE_FBSET_FANCY is not set +# CONFIG_FEATURE_FBSET_READMODE is not set +# CONFIG_FEATURE_FDISK_ADVANCED is not set +# CONFIG_FEATURE_FDISK_WRITABLE is not set +# CONFIG_FEATURE_FIND_CONTEXT is not set +# CONFIG_FEATURE_FIND_DELETE is not set +CONFIG_FEATURE_FIND_DEPTH=y +CONFIG_FEATURE_FIND_EXEC=y +CONFIG_FEATURE_FIND_GROUP=y +# CONFIG_FEATURE_FIND_INUM is not set +# CONFIG_FEATURE_FIND_LINKS is not set +CONFIG_FEATURE_FIND_MAXDEPTH=y +# CONFIG_FEATURE_FIND_MMIN is not set +# CONFIG_FEATURE_FIND_MTIME is not set +# CONFIG_FEATURE_FIND_NEWER is not set +CONFIG_FEATURE_FIND_NOT=y +CONFIG_FEATURE_FIND_PAREN=y +CONFIG_FEATURE_FIND_PATH=y +CONFIG_FEATURE_FIND_PERM=y +CONFIG_FEATURE_FIND_PRINT0=y +CONFIG_FEATURE_FIND_PRUNE=y +CONFIG_FEATURE_FIND_REGEX=y +CONFIG_FEATURE_FIND_SIZE=y +CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_USER=y +CONFIG_FEATURE_FIND_XDEV=y +# CONFIG_FEATURE_FLOAT_SLEEP is not set +# CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set +# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set +# CONFIG_FEATURE_FTP_WRITE is not set +# CONFIG_FEATURE_GETOPT_LONG is not set +# CONFIG_FEATURE_GPT_LABEL is not set +CONFIG_FEATURE_GREP_CONTEXT=y +CONFIG_FEATURE_GREP_EGREP_ALIAS=y +CONFIG_FEATURE_GREP_FGREP_ALIAS=y +# CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set +# CONFIG_FEATURE_HAVE_RPC is not set +# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set +# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set +# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set +# CONFIG_FEATURE_HEXDUMP_REVERSE is not set +# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set +# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set +# CONFIG_FEATURE_HTTPD_CGI is not set +# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set +# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set +# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set +# CONFIG_FEATURE_HTTPD_GZIP is not set +# CONFIG_FEATURE_HTTPD_PROXY is not set +# CONFIG_FEATURE_HTTPD_RANGES is not set +# CONFIG_FEATURE_HTTPD_SETUID is not set +# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set +# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set +CONFIG_FEATURE_HUMAN_READABLE=y +# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set +# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set +# CONFIG_FEATURE_HWIB is not set +CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y +CONFIG_FEATURE_IFCONFIG_HW=y +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +CONFIG_FEATURE_IFCONFIG_STATUS=y +# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set +# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set +# CONFIG_FEATURE_IFUPDOWN_IP is not set +# CONFIG_FEATURE_IFUPDOWN_IPV4 is not set +# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set +# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set +# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set +# CONFIG_FEATURE_INDIVIDUAL is not set +# CONFIG_FEATURE_INETD_RPC is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set +# CONFIG_FEATURE_INITRD is not set +# CONFIG_FEATURE_INIT_COREDUMPS is not set +# CONFIG_FEATURE_INIT_SCTTY is not set +# CONFIG_FEATURE_INIT_SYSLOG is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSTALLER is not set +# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set +# CONFIG_FEATURE_IPC_SYSLOG is not set +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0 +CONFIG_FEATURE_IPV6=y +# CONFIG_FEATURE_IP_ADDRESS is not set +# CONFIG_FEATURE_IP_LINK is not set +# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set +# CONFIG_FEATURE_IP_ROUTE is not set +# CONFIG_FEATURE_IP_RULE is not set +# CONFIG_FEATURE_IP_SHORT_FORMS is not set +# CONFIG_FEATURE_IP_TUNNEL is not set +CONFIG_FEATURE_KILL_DELAY=0 +# CONFIG_FEATURE_KILL_REMOVED is not set +# CONFIG_FEATURE_KLOGD_KLOGCTL is not set +# CONFIG_FEATURE_LAST_FANCY is not set +# CONFIG_FEATURE_LAST_SMALL is not set +# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set +# CONFIG_FEATURE_LESS_BRACKETS is not set +# CONFIG_FEATURE_LESS_DASHCMD is not set +# CONFIG_FEATURE_LESS_FLAGS is not set +# CONFIG_FEATURE_LESS_LINENUMS is not set +# CONFIG_FEATURE_LESS_MARKS is not set +CONFIG_FEATURE_LESS_MAXLINES=9999999 +# CONFIG_FEATURE_LESS_REGEXP is not set +# CONFIG_FEATURE_LESS_WINCH is not set +# CONFIG_FEATURE_LOADFONT_PSF2 is not set +# CONFIG_FEATURE_LOADFONT_RAW is not set +# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set +CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y +CONFIG_FEATURE_LS_COLOR=y +CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y +CONFIG_FEATURE_LS_FILETYPES=y +CONFIG_FEATURE_LS_FOLLOWLINKS=y +CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +# CONFIG_FEATURE_LZMA_FAST is not set +# CONFIG_FEATURE_MAKEDEVS_LEAF is not set +# CONFIG_FEATURE_MAKEDEVS_TABLE is not set +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y +# CONFIG_FEATURE_MDEV_CONF is not set +# CONFIG_FEATURE_MDEV_EXEC is not set +# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set +# CONFIG_FEATURE_MDEV_RENAME is not set +# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set +# CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP is not set +CONFIG_FEATURE_MIME_CHARSET="" +# CONFIG_FEATURE_MINIX2 is not set +# CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set +# CONFIG_FEATURE_MKSWAP_UUID is not set +# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set +# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set +# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set +# CONFIG_FEATURE_MODUTILS_ALIAS is not set +# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set +CONFIG_FEATURE_MOUNT_CIFS=y +# CONFIG_FEATURE_MOUNT_FAKE is not set +CONFIG_FEATURE_MOUNT_FLAGS=y +CONFIG_FEATURE_MOUNT_FSTAB=y +CONFIG_FEATURE_MOUNT_HELPERS=y +# CONFIG_FEATURE_MOUNT_LABEL is not set +CONFIG_FEATURE_MOUNT_LOOP=y +# CONFIG_FEATURE_MOUNT_LOOP_CREATE is not set +# CONFIG_FEATURE_MOUNT_NFS is not set +# CONFIG_FEATURE_MOUNT_VERBOSE is not set +# CONFIG_FEATURE_MTAB_SUPPORT is not set +# CONFIG_FEATURE_MV_LONG_OPTIONS is not set +# CONFIG_FEATURE_NAMEIF_EXTENDED is not set +CONFIG_FEATURE_NETSTAT_PRG=y +CONFIG_FEATURE_NETSTAT_WIDE=y +# CONFIG_FEATURE_NOLOGIN is not set +CONFIG_FEATURE_NON_POSIX_CP=y +CONFIG_FEATURE_NTPD_SERVER=y +# CONFIG_FEATURE_OSF_LABEL is not set +CONFIG_FEATURE_PASSWD_WEAK_CHECK=y +CONFIG_FEATURE_PIDFILE=y +# CONFIG_FEATURE_PIDOF_OMIT is not set +# CONFIG_FEATURE_PIDOF_SINGLE is not set +# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set +CONFIG_FEATURE_PREFER_APPLETS=y +CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y +CONFIG_FEATURE_PRESERVE_HARDLINKS=y +# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set +# CONFIG_FEATURE_PS_TIME is not set +# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set +CONFIG_FEATURE_PS_WIDE=y +CONFIG_FEATURE_READLINK_FOLLOW=y +# CONFIG_FEATURE_REFORMIME_COMPAT is not set +# CONFIG_FEATURE_REMOTE_LOG is not set +# CONFIG_FEATURE_RESIZE_PRINT is not set +# CONFIG_FEATURE_REVERSE_SEARCH is not set +# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set +# CONFIG_FEATURE_ROTATE_LOGFILE is not set +# CONFIG_FEATURE_RTMINMAX is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_FEATURE_RUNSVDIR_LOG is not set +# CONFIG_FEATURE_RUN_PARTS_FANCY is not set +# CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS is not set +# CONFIG_FEATURE_SEAMLESS_BZ2 is not set +CONFIG_FEATURE_SEAMLESS_GZ=y +# CONFIG_FEATURE_SEAMLESS_LZMA is not set +# CONFIG_FEATURE_SEAMLESS_XZ is not set +# CONFIG_FEATURE_SEAMLESS_Z is not set +# CONFIG_FEATURE_SECURETTY is not set +# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set +# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set +# CONFIG_FEATURE_SGI_LABEL is not set +CONFIG_FEATURE_SHADOWPASSWDS=y +# CONFIG_FEATURE_SHARED_BUSYBOX is not set +# CONFIG_FEATURE_SHOW_THREADS is not set +# CONFIG_FEATURE_SH_EXTRA_QUIET is not set +# CONFIG_FEATURE_SH_HISTFILESIZE is not set +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +# CONFIG_FEATURE_SH_NOFORK is not set +# CONFIG_FEATURE_SH_STANDALONE is not set +# CONFIG_FEATURE_SKIP_ROOTFS is not set +# CONFIG_FEATURE_SORT_BIG is not set +# CONFIG_FEATURE_SPLIT_FANCY is not set +# CONFIG_FEATURE_START_STOP_DAEMON_FANCY is not set +# CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS is not set +# CONFIG_FEATURE_STAT_FORMAT is not set +CONFIG_FEATURE_SUID=y +# CONFIG_FEATURE_SUID_CONFIG is not set +# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set +# CONFIG_FEATURE_SUN_LABEL is not set +# CONFIG_FEATURE_SU_CHECKS_SHELLS is not set +# CONFIG_FEATURE_SU_SYSLOG is not set +CONFIG_FEATURE_SYSLOG=y +# CONFIG_FEATURE_SYSLOGD_CFG is not set +# CONFIG_FEATURE_SYSLOGD_DUP is not set +CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0 +# CONFIG_FEATURE_SYSTEMD is not set +CONFIG_FEATURE_TAB_COMPLETION=y +# CONFIG_FEATURE_TAR_AUTODETECT is not set +CONFIG_FEATURE_TAR_CREATE=y +CONFIG_FEATURE_TAR_FROM=y +CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y +# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set +# CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set +# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set +# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set +# CONFIG_FEATURE_TAR_SELINUX is not set +# CONFIG_FEATURE_TAR_TO_COMMAND is not set +# CONFIG_FEATURE_TAR_UNAME_GNAME is not set +# CONFIG_FEATURE_TASKSET_FANCY is not set +CONFIG_FEATURE_TEE_USE_BLOCK_IO=y +# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set +CONFIG_FEATURE_TELNETD_STANDALONE=y +# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set +CONFIG_FEATURE_TELNET_TTYPE=y +CONFIG_FEATURE_TEST_64=y +# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set +# CONFIG_FEATURE_TFTP_GET is not set +# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set +# CONFIG_FEATURE_TFTP_PUT is not set +# CONFIG_FEATURE_TOPMEM is not set +CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y +CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y +# CONFIG_FEATURE_TOP_DECIMALS is not set +# CONFIG_FEATURE_TOP_SMP_CPU is not set +# CONFIG_FEATURE_TOP_SMP_PROCESS is not set +# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set +# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set +CONFIG_FEATURE_TRACEROUTE_VERBOSE=y +# CONFIG_FEATURE_TR_CLASSES is not set +# CONFIG_FEATURE_TR_EQUIV is not set +# CONFIG_FEATURE_TUNCTL_UG is not set +# CONFIG_FEATURE_UDHCPC_ARPING is not set +# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set +# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set +# CONFIG_FEATURE_UDHCP_8021Q is not set +# CONFIG_FEATURE_UDHCP_PORT is not set +CONFIG_FEATURE_UDHCP_RFC3397=y +CONFIG_FEATURE_UMOUNT_ALL=y +# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set +# CONFIG_FEATURE_UNIX_LOCAL is not set +# CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set +# CONFIG_FEATURE_USERNAME_COMPLETION is not set +# CONFIG_FEATURE_USE_INITTAB is not set +# CONFIG_FEATURE_USE_TERMIOS is not set +# CONFIG_FEATURE_UTMP is not set +# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set +CONFIG_FEATURE_VERBOSE_USAGE=y +# CONFIG_FEATURE_VI_8BIT is not set +CONFIG_FEATURE_VI_ASK_TERMINAL=y +CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_DOT_CMD=y +CONFIG_FEATURE_VI_MAX_LEN=1024 +CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y +CONFIG_FEATURE_VI_READONLY=y +# CONFIG_FEATURE_VI_REGEX_SEARCH is not set +CONFIG_FEATURE_VI_SEARCH=y +CONFIG_FEATURE_VI_SET=y +CONFIG_FEATURE_VI_SETOPTS=y +CONFIG_FEATURE_VI_USE_SIGNALS=y +CONFIG_FEATURE_VI_WIN_RESIZE=y +CONFIG_FEATURE_VI_YANKMARK=y +# CONFIG_FEATURE_VOLUMEID_BTRFS is not set +# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set +# CONFIG_FEATURE_VOLUMEID_EXT is not set +# CONFIG_FEATURE_VOLUMEID_FAT is not set +# CONFIG_FEATURE_VOLUMEID_HFS is not set +# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set +# CONFIG_FEATURE_VOLUMEID_JFS is not set +# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set +# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set +# CONFIG_FEATURE_VOLUMEID_LUKS is not set +# CONFIG_FEATURE_VOLUMEID_NTFS is not set +# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set +# CONFIG_FEATURE_VOLUMEID_REISERFS is not set +# CONFIG_FEATURE_VOLUMEID_ROMFS is not set +# CONFIG_FEATURE_VOLUMEID_SYSV is not set +# CONFIG_FEATURE_VOLUMEID_UDF is not set +# CONFIG_FEATURE_VOLUMEID_XFS is not set +# CONFIG_FEATURE_WC_LARGE is not set +CONFIG_FEATURE_WGET_AUTHENTICATION=y +CONFIG_FEATURE_WGET_LONG_OPTIONS=y +CONFIG_FEATURE_WGET_STATUSBAR=y +# CONFIG_FEATURE_WGET_TIMEOUT is not set +# CONFIG_FEATURE_WTMP is not set +CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y +CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y +CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y +# CONFIG_FGCONSOLE is not set +CONFIG_FIND=y +# CONFIG_FINDFS is not set +CONFIG_FIRST_SYSTEM_ID=0 +# CONFIG_FLASHCP is not set +# CONFIG_FLASH_ERASEALL is not set +# CONFIG_FLASH_LOCK is not set +# CONFIG_FLASH_UNLOCK is not set +# CONFIG_FLOCK is not set +# CONFIG_FOLD is not set +CONFIG_FREE=y +# CONFIG_FREERAMDISK is not set +# CONFIG_FSCK is not set +# CONFIG_FSCK_MINIX is not set +CONFIG_FSYNC=y +# CONFIG_FTPD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +# CONFIG_FUSER is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETOPT is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_GETTY is not set +CONFIG_GREP=y +# CONFIG_GROUPS is not set +CONFIG_GUNZIP=y +CONFIG_GZIP=y +CONFIG_HALT=y +CONFIG_HAVE_DOT_CONFIG=y +# CONFIG_HD is not set +# CONFIG_HDPARM is not set +CONFIG_HEAD=y +CONFIG_HEXDUMP=y +CONFIG_HOSTID=y +# CONFIG_HOSTNAME is not set +# CONFIG_HTTPD is not set +# CONFIG_HUSH is not set +# CONFIG_HUSH_BASH_COMPAT is not set +# CONFIG_HUSH_BRACE_EXPANSION is not set +# CONFIG_HUSH_CASE is not set +# CONFIG_HUSH_EXPORT_N is not set +# CONFIG_HUSH_FUNCTIONS is not set +# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_IF is not set +# CONFIG_HUSH_INTERACTIVE is not set +# CONFIG_HUSH_JOB is not set +# CONFIG_HUSH_LOCAL is not set +# CONFIG_HUSH_LOOPS is not set +# CONFIG_HUSH_MODE_X is not set +# CONFIG_HUSH_RANDOM_SUPPORT is not set +# CONFIG_HUSH_SAVEHISTORY is not set +# CONFIG_HUSH_TICK is not set +CONFIG_HWCLOCK=y +CONFIG_ID=y +CONFIG_IFCONFIG=y +# CONFIG_IFENSLAVE is not set +# CONFIG_IFPLUGD is not set +# CONFIG_IFUPDOWN is not set +CONFIG_IFUPDOWN_IFSTATE_PATH="" +CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="" +CONFIG_INCLUDE_SUSv2=y +# CONFIG_INETD is not set +# CONFIG_INIT is not set +CONFIG_INIT_TERMINAL_TYPE="" +# CONFIG_INOTIFYD is not set +CONFIG_INSMOD=y +# CONFIG_INSTALL is not set +# CONFIG_INSTALL_APPLET_DONT is not set +# CONFIG_INSTALL_APPLET_HARDLINKS is not set +# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set +CONFIG_INSTALL_APPLET_SYMLINKS=y +# CONFIG_INSTALL_NO_USR is not set +# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set +# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set +# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set +CONFIG_IOCTL_HEX2STR_ERROR=y +# CONFIG_IONICE is not set +# CONFIG_IOSTAT is not set +# CONFIG_IP is not set +# CONFIG_IPADDR is not set +# CONFIG_IPCALC is not set +# CONFIG_IPCRM is not set +# CONFIG_IPCS is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPRULE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_KBD_MODE is not set +CONFIG_KILL=y +CONFIG_KILLALL=y +# CONFIG_KILLALL5 is not set +# CONFIG_KLOGD is not set +# CONFIG_LAST is not set +CONFIG_LAST_SUPPORTED_WCHAR=0 +CONFIG_LAST_SYSTEM_ID=0 +CONFIG_LESS=y +CONFIG_LFS=y +CONFIG_LN=y +# CONFIG_LOADFONT is not set +# CONFIG_LOADKMAP is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_LOCALE_SUPPORT is not set +CONFIG_LOCK=y +CONFIG_LOGGER=y +# CONFIG_LOGIN is not set +# CONFIG_LOGIN_SCRIPTS is not set +# CONFIG_LOGNAME is not set +# CONFIG_LOGREAD is not set +CONFIG_LONG_OPTS=y +# CONFIG_LOSETUP is not set +# CONFIG_LPD is not set +# CONFIG_LPQ is not set +# CONFIG_LPR is not set +CONFIG_LS=y +# CONFIG_LSATTR is not set +CONFIG_LSMOD=y +# CONFIG_LSPCI is not set +# CONFIG_LSUSB is not set +# CONFIG_LZMA is not set +# CONFIG_LZOP is not set +# CONFIG_LZOP_COMPR_HIGH is not set +# CONFIG_MAKEDEVS is not set +# CONFIG_MAKEMIME is not set +# CONFIG_MAN is not set +# CONFIG_MATCHPATHCON is not set +CONFIG_MD5SUM=y +CONFIG_MD5_SIZE_VS_SPEED=2 +# CONFIG_MDEV is not set +# CONFIG_MESG is not set +# CONFIG_MICROCOM is not set +CONFIG_MKDIR=y +CONFIG_MKFIFO=y +# CONFIG_MKFS_EXT2 is not set +# CONFIG_MKFS_MINIX is not set +# CONFIG_MKFS_REISER is not set +# CONFIG_MKFS_VFAT is not set +CONFIG_MKNOD=y +CONFIG_MKSWAP=y +CONFIG_MKTEMP=y +# CONFIG_MODINFO is not set +# CONFIG_MODPROBE is not set +# CONFIG_MODPROBE_SMALL is not set +# CONFIG_MONOTONIC_SYSCALL is not set +# CONFIG_MORE is not set +CONFIG_MOUNT=y +# CONFIG_MOUNTPOINT is not set +# CONFIG_MPSTAT is not set +# CONFIG_MSH is not set +# CONFIG_MT is not set +CONFIG_MV=y +# CONFIG_NAMEIF is not set +# CONFIG_NANDDUMP is not set +# CONFIG_NANDWRITE is not set +# CONFIG_NBDCLIENT is not set +CONFIG_NC=y +# CONFIG_NC_110_COMPAT is not set +# CONFIG_NC_EXTRA is not set +# CONFIG_NC_SERVER is not set +CONFIG_NETMSG=y +CONFIG_NETSTAT=y +CONFIG_NICE=y +# CONFIG_NMETER is not set +# CONFIG_NOHUP is not set +# CONFIG_NOMMU is not set +CONFIG_NO_DEBUG_LIB=y +CONFIG_NSLOOKUP=y +CONFIG_NTPD=y +# CONFIG_OD is not set +# CONFIG_OPENVT is not set +# CONFIG_PAM is not set +CONFIG_PASSWD=y +CONFIG_PASSWORD_MINLEN=6 +# CONFIG_PATCH is not set +CONFIG_PGREP=y +CONFIG_PIDOF=y +# CONFIG_PIE is not set +CONFIG_PING=y +CONFIG_PING6=y +# CONFIG_PIPE_PROGRESS is not set +CONFIG_PIVOT_ROOT=y +# CONFIG_PKILL is not set +CONFIG_PLATFORM_LINUX=y +# CONFIG_PMAP is not set +# CONFIG_POPMAILDIR is not set +# CONFIG_POWERTOP is not set +CONFIG_PREFIX="./_install" +# CONFIG_PRINTENV is not set +CONFIG_PRINTF=y +CONFIG_PS=y +# CONFIG_PSCAN is not set +# CONFIG_PSTREE is not set +CONFIG_PWD=y +# CONFIG_PWDX is not set +# CONFIG_RAIDAUTORUN is not set +# CONFIG_RDATE is not set +# CONFIG_RDEV is not set +# CONFIG_READAHEAD is not set +CONFIG_READLINK=y +# CONFIG_READPROFILE is not set +# CONFIG_REALPATH is not set +# CONFIG_REFORMIME is not set +# CONFIG_REMOVE_SHELL is not set +# CONFIG_RENICE is not set +CONFIG_RESET=y +# CONFIG_RESIZE is not set +# CONFIG_RESTORECON is not set +# CONFIG_REV is not set +# CONFIG_RFKILL is not set +CONFIG_RM=y +CONFIG_RMDIR=y +CONFIG_RMMOD=y +CONFIG_ROUTE=y +# CONFIG_RPM is not set +# CONFIG_RPM2CPIO is not set +# CONFIG_RTCWAKE is not set +# CONFIG_RUNCON is not set +# CONFIG_RUNLEVEL is not set +# CONFIG_RUNSV is not set +# CONFIG_RUNSVDIR is not set +# CONFIG_RUN_PARTS is not set +# CONFIG_RX is not set +# CONFIG_SCRIPT is not set +# CONFIG_SCRIPTREPLAY is not set +CONFIG_SED=y +# CONFIG_SELINUX is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SENDMAIL is not set +CONFIG_SEQ=y +# CONFIG_SESTATUS is not set +# CONFIG_SETARCH is not set +# CONFIG_SETCONSOLE is not set +# CONFIG_SETENFORCE is not set +# CONFIG_SETFILES is not set +# CONFIG_SETFONT is not set +# CONFIG_SETKEYCODES is not set +# CONFIG_SETLOGCONS is not set +# CONFIG_SETSEBOOL is not set +# CONFIG_SETSERIAL is not set +# CONFIG_SETSID is not set +# CONFIG_SETUIDGID is not set +# CONFIG_SHA1SUM is not set +# CONFIG_SHA256SUM is not set +# CONFIG_SHA512SUM is not set +# CONFIG_SHOWKEY is not set +CONFIG_SHOW_USAGE=y +CONFIG_SH_MATH_SUPPORT=y +CONFIG_SH_MATH_SUPPORT_64=y +# CONFIG_SLATTACH is not set +CONFIG_SLEEP=y +# CONFIG_SMEMCAP is not set +# CONFIG_SOFTLIMIT is not set +CONFIG_SORT=y +# CONFIG_SPLIT is not set +CONFIG_START_STOP_DAEMON=y +# CONFIG_STAT is not set +# CONFIG_STATIC is not set +CONFIG_STRINGS=y +# CONFIG_STTY is not set +# CONFIG_SU is not set +CONFIG_SUBST_WCHAR=0 +# CONFIG_SULOGIN is not set +# CONFIG_SUM is not set +# CONFIG_SV is not set +# CONFIG_SVLOGD is not set +CONFIG_SV_DEFAULT_SERVICE_DIR="" +# CONFIG_SWAPONOFF is not set +CONFIG_SWITCH_ROOT=y +CONFIG_SYNC=y +# CONFIG_SYSLOGD is not set +# CONFIG_TAC is not set +CONFIG_TAIL=y +CONFIG_TAR=y +# CONFIG_TASKSET is not set +# CONFIG_TCPSVD is not set +CONFIG_TEE=y +CONFIG_TELINIT_PATH="" +CONFIG_TELNET=y +CONFIG_TELNETD=y +CONFIG_TEST=y +# CONFIG_TFTP is not set +# CONFIG_TFTPD is not set +# CONFIG_TFTP_DEBUG is not set +CONFIG_TIME=y +# CONFIG_TIMEOUT is not set +CONFIG_TOP=y +CONFIG_TOUCH=y +CONFIG_TR=y +CONFIG_TRACEROUTE=y +# CONFIG_TRACEROUTE6 is not set +CONFIG_TRUE=y +# CONFIG_TTY is not set +# CONFIG_TTYSIZE is not set +# CONFIG_TUNCTL is not set +# CONFIG_TUNE2FS is not set +# CONFIG_UBIATTACH is not set +# CONFIG_UBIDETACH is not set +# CONFIG_UBIMKVOL is not set +# CONFIG_UBIRMVOL is not set +# CONFIG_UBIRSVOL is not set +# CONFIG_UBIUPDATEVOL is not set +CONFIG_UDHCPC=y +CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" +CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80 +# CONFIG_UDHCPD is not set +CONFIG_UDHCP_DEBUG=0 +# CONFIG_UDPSVD is not set +CONFIG_UMOUNT=y +CONFIG_UNAME=y +# CONFIG_UNCOMPRESS is not set +# CONFIG_UNEXPAND is not set +# CONFIG_UNICODE_BIDI_SUPPORT is not set +# CONFIG_UNICODE_COMBINING_WCHARS is not set +# CONFIG_UNICODE_NEUTRAL_TABLE is not set +# CONFIG_UNICODE_PRESERVE_BROKEN is not set +# CONFIG_UNICODE_SUPPORT is not set +# CONFIG_UNICODE_USING_LOCALE is not set +# CONFIG_UNICODE_WIDE_WCHARS is not set +CONFIG_UNIQ=y +# CONFIG_UNIX2DOS is not set +# CONFIG_UNLZMA is not set +# CONFIG_UNXZ is not set +# CONFIG_UNZIP is not set +CONFIG_UPTIME=y +# CONFIG_USERS is not set +# CONFIG_USE_BB_CRYPT is not set +# CONFIG_USE_BB_CRYPT_SHA is not set +# CONFIG_USE_BB_PWD_GRP is not set +# CONFIG_USE_BB_SHADOW is not set +# CONFIG_USE_PORTABLE_CODE is not set +# CONFIG_USLEEP is not set +# CONFIG_UUDECODE is not set +# CONFIG_UUENCODE is not set +CONFIG_VCONFIG=y +CONFIG_VERBOSE_RESOLUTION_ERRORS=y +CONFIG_VI=y +# CONFIG_VLOCK is not set +# CONFIG_VOLNAME is not set +# CONFIG_VOLUMEID is not set +# CONFIG_WALL is not set +# CONFIG_WATCH is not set +# CONFIG_WATCHDOG is not set +CONFIG_WC=y +# CONFIG_WERROR is not set +CONFIG_WGET=y +CONFIG_WHICH=y +# CONFIG_WHO is not set +# CONFIG_WHOAMI is not set +# CONFIG_WHOIS is not set +CONFIG_XARGS=y +# CONFIG_XZ is not set +CONFIG_YES=y +# CONFIG_ZCIP is not set diff --git a/package/utils/busybox/config/e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/Config.in deleted file mode 100644 index 282681db0c..0000000000 --- a/package/utils/busybox/config/e2fsprogs/Config.in +++ /dev/null @@ -1,72 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Ext2 FS Progs" - - - -config BUSYBOX_CONFIG_CHATTR - bool "chattr" - default n - help - chattr changes the file attributes on a second extended file system. - -### config E2FSCK -### bool "e2fsck" -### default y -### help -### e2fsck is used to check Linux second extended file systems (ext2fs). -### e2fsck also supports ext2 filesystems countaining a journal (ext3). -### The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also -### provided. - -config BUSYBOX_CONFIG_FSCK - bool "fsck" - default n - help - fsck is used to check and optionally repair one or more filesystems. - In actuality, fsck is simply a front-end for the various file system - checkers (fsck.fstype) available under Linux. - -config BUSYBOX_CONFIG_LSATTR - bool "lsattr" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - lsattr lists the file attributes on a second extended file system. - -### config MKE2FS -### bool "mke2fs" -### default y -### help -### mke2fs is used to create an ext2/ext3 filesystem. The normal compat -### symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. - -config BUSYBOX_CONFIG_TUNE2FS - bool "tune2fs" - default n # off: it is too limited compared to upstream version - help - tune2fs allows the system administrator to adjust various tunable - filesystem parameters on Linux ext2/ext3 filesystems. - -### config E2LABEL -### bool "e2label" -### default y -### depends on TUNE2FS -### help -### e2label will display or change the filesystem label on the ext2 -### filesystem located on device. - -### NB: this one is now provided by util-linux/volume_id/* -### config FINDFS -### bool "findfs" -### default y -### depends on TUNE2FS -### help -### findfs will search the disks in the system looking for a filesystem -### which has a label matching label or a UUID equal to uuid. - -endmenu diff --git a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in deleted file mode 100644 index 105c93a562..0000000000 --- a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in +++ /dev/null @@ -1,70 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Ext2 FS Progs" - - - -config BUSYBOX_CONFIG_CHATTR - bool "chattr" - default n - help - chattr changes the file attributes on a second extended file system. - -config BUSYBOX_CONFIG_E2FSCK - bool "e2fsck" - default n - help - e2fsck is used to check Linux second extended file systems (ext2fs). - e2fsck also supports ext2 filesystems countaining a journal (ext3). - The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also - provided. - -config BUSYBOX_CONFIG_FSCK - bool "fsck" - default n - help - fsck is used to check and optionally repair one or more filesystems. - In actuality, fsck is simply a front-end for the various file system - checkers (fsck.fstype) available under Linux. - -config BUSYBOX_CONFIG_LSATTR - bool "lsattr" - default n - help - lsattr lists the file attributes on a second extended file system. - -config BUSYBOX_CONFIG_MKE2FS - bool "mke2fs" - default n - help - mke2fs is used to create an ext2/ext3 filesystem. The normal compat - symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. - -config BUSYBOX_CONFIG_TUNE2FS - bool "tune2fs" - default n - help - tune2fs allows the system administrator to adjust various tunable - filesystem parameters on Linux ext2/ext3 filesystems. - -config BUSYBOX_CONFIG_E2LABEL - bool "e2label" - default n - depends on BUSYBOX_CONFIG_TUNE2FS - help - e2label will display or change the filesystem label on the ext2 - filesystem located on device. - -config BUSYBOX_CONFIG_FINDFS - bool "findfs" - default n - depends on BUSYBOX_CONFIG_TUNE2FS - help - findfs will search the disks in the system looking for a filesystem - which has a label matching label or a UUID equal to uuid. - -endmenu diff --git a/package/utils/busybox/config/editors/Config.in b/package/utils/busybox/config/editors/Config.in deleted file mode 100644 index 21321dbb08..0000000000 --- a/package/utils/busybox/config/editors/Config.in +++ /dev/null @@ -1,206 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Editors" - -config BUSYBOX_CONFIG_PATCH - bool "patch" - default n - help - Apply a unified diff formatted patch. -config BUSYBOX_CONFIG_VI - bool "vi" - default y - help - 'vi' is a text editor. More specifically, it is the One True - text editor . It does, however, have a rather steep - learning curve. If you are not already comfortable with 'vi' - you may wish to use something else. - -config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN - int "Maximum screen width in vi" - range 256 16384 - default 1024 - depends on BUSYBOX_CONFIG_VI - help - Contrary to what you may think, this is not eating much. - Make it smaller than 4k only if you are very limited on memory. - -config BUSYBOX_CONFIG_FEATURE_VI_8BIT - bool "Allow vi to display 8-bit chars (otherwise shows dots)" - default n - depends on BUSYBOX_CONFIG_VI - help - If your terminal can display characters with high bit set, - you may want to enable this. Note: vi is not Unicode-capable. - If your terminal combines several 8-bit bytes into one character - (as in Unicode mode), this will not work properly. - -config BUSYBOX_CONFIG_FEATURE_VI_COLON - bool "Enable \":\" colon commands (no \"ex\" mode)" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable a limited set of colon commands for vi. This does not - provide an "ex" mode. - -config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK - bool "Enable yank/put commands and mark cmds" - default y - depends on BUSYBOX_CONFIG_VI - help - This will enable you to use yank and put, as well as mark in - busybox vi. - -config BUSYBOX_CONFIG_FEATURE_VI_SEARCH - bool "Enable search and replace cmds" - default y - depends on BUSYBOX_CONFIG_VI - help - Select this if you wish to be able to do search and replace in - busybox vi. - -config BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH - bool "Enable regex in search and replace" - default n # Uses GNU regex, which may be unavailable. FIXME - depends on BUSYBOX_CONFIG_FEATURE_VI_SEARCH - help - Use extended regex search. - -config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS - bool "Catch signals" - default y - depends on BUSYBOX_CONFIG_VI - help - Selecting this option will make busybox vi signal aware. This will - make busybox vi support SIGWINCH to deal with Window Changes, catch - Ctrl-Z and Ctrl-C and alarms. - -config BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD - bool "Remember previous cmd and \".\" cmd" - default y - depends on BUSYBOX_CONFIG_VI - help - Make busybox vi remember the last command and be able to repeat it. - -config BUSYBOX_CONFIG_FEATURE_VI_READONLY - bool "Enable -R option and \"view\" mode" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable the read-only command line option, which allows the user to - open a file in read-only mode. - -config BUSYBOX_CONFIG_FEATURE_VI_SETOPTS - bool "Enable set-able options, ai ic showmatch" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable the editor to set some (ai, ic, showmatch) options. - -config BUSYBOX_CONFIG_FEATURE_VI_SET - bool "Support for :set" - default y - depends on BUSYBOX_CONFIG_VI - help - Support for ":set". - -config BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE - bool "Handle window resize" - default y - depends on BUSYBOX_CONFIG_VI - help - Make busybox vi behave nicely with terminals that get resized. - -config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL - bool "Use 'tell me cursor position' ESC sequence to measure window" - default y - depends on BUSYBOX_CONFIG_VI - help - If terminal size can't be retrieved and $LINES/$COLUMNS are not set, - this option makes vi perform a last-ditch effort to find it: - position cursor to 999,999 and ask terminal to report real - cursor position using "ESC [ 6 n" escape sequence, then read stdin. - - This is not clean but helps a lot on serial lines and such. - -config BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR - bool "Optimize cursor movement" - default y - depends on BUSYBOX_CONFIG_VI - help - This will make the cursor movement faster, but requires more memory - and it makes the applet a tiny bit larger. - -config BUSYBOX_CONFIG_AWK - bool "awk" - default y - help - Awk is used as a pattern scanning and processing language. This is - the BusyBox implementation of that programming language. - -config BUSYBOX_CONFIG_FEATURE_AWK_LIBM - bool "Enable math functions (requires libm)" - default y - depends on BUSYBOX_CONFIG_AWK - help - Enable math functions of the Awk programming language. - NOTE: This will require libm to be present for linking. - -config BUSYBOX_CONFIG_CMP - bool "cmp" - default y - help - cmp is used to compare two files and returns the result - to standard output. - -config BUSYBOX_CONFIG_DIFF - bool "diff" - default n - help - diff compares two files or directories and outputs the - differences between them in a form that can be given to - the patch command. - -config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS - help - Enable use of long options. - -config BUSYBOX_CONFIG_FEATURE_DIFF_DIR - bool "Enable directory support" - default n - depends on BUSYBOX_CONFIG_DIFF - help - This option enables support for directory and subdirectory - comparison. - -config BUSYBOX_CONFIG_ED - bool "ed" - default n - help - The original 1970's Unix text editor, from the days of teletypes. - Small, simple, evil. Part of SUSv3. If you're not already using - this, you don't need it. - -config BUSYBOX_CONFIG_SED - bool "sed" - default y - help - sed is used to perform text transformations on a file - or input from a pipeline. - -config BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC - bool "Allow vi and awk to execute shell commands" - default y - depends on BUSYBOX_CONFIG_VI || BUSYBOX_CONFIG_AWK - help - Enables vi and awk features which allows user to execute - shell commands (using system() C call). - -endmenu diff --git a/package/utils/busybox/config/findutils/Config.in b/package/utils/busybox/config/findutils/Config.in deleted file mode 100644 index 8db1fdef91..0000000000 --- a/package/utils/busybox/config/findutils/Config.in +++ /dev/null @@ -1,252 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Finding Utilities" - -config BUSYBOX_CONFIG_FIND - bool "find" - default y - help - find is used to search your system to find specified files. - -config BUSYBOX_CONFIG_FEATURE_FIND_PRINT0 - bool "Enable -print0: NUL-terminated output" - default y - depends on BUSYBOX_CONFIG_FIND - help - Causes output names to be separated by a NUL character - rather than a newline. This allows names that contain - newlines and other whitespace to be more easily - interpreted by other programs. - -config BUSYBOX_CONFIG_FEATURE_FIND_MTIME - bool "Enable -mtime: modified time matching" - default n - depends on BUSYBOX_CONFIG_FIND - help - Allow searching based on the modification time of - files, in days. - -config BUSYBOX_CONFIG_FEATURE_FIND_MMIN - bool "Enable -mmin: modified time matching by minutes" - default n - depends on BUSYBOX_CONFIG_FIND - help - Allow searching based on the modification time of - files, in minutes. - -config BUSYBOX_CONFIG_FEATURE_FIND_PERM - bool "Enable -perm: permissions matching" - default y - depends on BUSYBOX_CONFIG_FIND - help - Enable searching based on file permissions. - -config BUSYBOX_CONFIG_FEATURE_FIND_TYPE - bool "Enable -type: file type matching (file/dir/link/...)" - default y - depends on BUSYBOX_CONFIG_FIND - help - Enable searching based on file type (file, - directory, socket, device, etc.). - -config BUSYBOX_CONFIG_FEATURE_FIND_XDEV - bool "Enable -xdev: 'stay in filesystem'" - default y - depends on BUSYBOX_CONFIG_FIND - help - This option allows find to restrict searches to a single filesystem. - -config BUSYBOX_CONFIG_FEATURE_FIND_MAXDEPTH - bool "Enable -mindepth N and -maxdepth N" - default y - depends on BUSYBOX_CONFIG_FIND - help - This option enables -mindepth N and -maxdepth N option. - -config BUSYBOX_CONFIG_FEATURE_FIND_NEWER - bool "Enable -newer: compare file modification times" - default n - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -newer' option for finding any files which have - modification time that is more recent than the specified FILE. - -config BUSYBOX_CONFIG_FEATURE_FIND_INUM - bool "Enable -inum: inode number matching" - default n - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -inum' option for searching by inode number. - -config BUSYBOX_CONFIG_FEATURE_FIND_EXEC - bool "Enable -exec: execute commands" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -exec' option for executing commands based upon - the files matched. - -config BUSYBOX_CONFIG_FEATURE_FIND_USER - bool "Enable -user: username/uid matching" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -user' option for searching by username or uid. - -config BUSYBOX_CONFIG_FEATURE_FIND_GROUP - bool "Enable -group: group/gid matching" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -group' option for searching by group name or gid. - -config BUSYBOX_CONFIG_FEATURE_FIND_NOT - bool "Enable the 'not' (!) operator" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the '!' operator to invert the test results. - If 'Enable full-blown desktop' is enabled, then will also support - the non-POSIX notation '-not'. - -config BUSYBOX_CONFIG_FEATURE_FIND_DEPTH - bool "Enable -depth" - default y - depends on BUSYBOX_CONFIG_FIND - help - Process each directory's contents before the directory itself. - -config BUSYBOX_CONFIG_FEATURE_FIND_PAREN - bool "Enable parens in options" - default y - depends on BUSYBOX_CONFIG_FIND - help - Enable usage of parens '(' to specify logical order of arguments. - -config BUSYBOX_CONFIG_FEATURE_FIND_SIZE - bool "Enable -size: file size matching" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -size' option for searching by file size. - -config BUSYBOX_CONFIG_FEATURE_FIND_PRUNE - bool "Enable -prune: exclude subdirectories" - default y - depends on BUSYBOX_CONFIG_FIND - help - If the file is a directory, dont descend into it. Useful for - exclusion .svn and CVS directories. - -config BUSYBOX_CONFIG_FEATURE_FIND_DELETE - bool "Enable -delete: delete files/dirs" - default n - depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_FEATURE_FIND_DEPTH - help - Support the 'find -delete' option for deleting files and directories. - WARNING: This option can do much harm if used wrong. Busybox will not - try to protect the user from doing stupid things. Use with care. - -config BUSYBOX_CONFIG_FEATURE_FIND_PATH - bool "Enable -path: match pathname with shell pattern" - default y - depends on BUSYBOX_CONFIG_FIND - help - The -path option matches whole pathname instead of just filename. - -config BUSYBOX_CONFIG_FEATURE_FIND_REGEX - bool "Enable -regex: match pathname with regex" - default y - depends on BUSYBOX_CONFIG_FIND - help - The -regex option matches whole pathname against regular expression. - -config BUSYBOX_CONFIG_FEATURE_FIND_CONTEXT - bool "Enable -context: security context matching" - default n - depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_SELINUX - help - Support the 'find -context' option for matching security context. - -config BUSYBOX_CONFIG_FEATURE_FIND_LINKS - bool "Enable -links: link count matching" - default n - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -links' option for matching number of links. -config BUSYBOX_CONFIG_GREP - bool "grep" - default y - help - grep is used to search files for a specified pattern. - -config BUSYBOX_CONFIG_FEATURE_GREP_EGREP_ALIAS - bool "Enable extended regular expressions (egrep & grep -E)" - default y - depends on BUSYBOX_CONFIG_GREP - help - Enabled support for extended regular expressions. Extended - regular expressions allow for alternation (foo|bar), grouping, - and various repetition operators. - -config BUSYBOX_CONFIG_FEATURE_GREP_FGREP_ALIAS - bool "Alias fgrep to grep -F" - default y - depends on BUSYBOX_CONFIG_GREP - help - fgrep sees the search pattern as a normal string rather than - regular expressions. - grep -F always works, this just creates the fgrep alias. - -config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT - bool "Enable before and after context flags (-A, -B and -C)" - default y - depends on BUSYBOX_CONFIG_GREP - help - Print the specified number of leading (-B) and/or trailing (-A) - context surrounding our matching lines. - Print the specified number of context lines (-C). -config BUSYBOX_CONFIG_XARGS - bool "xargs" - default y - help - xargs is used to execute a specified command for - every item from standard input. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION - bool "Enable -p: prompt and confirmation" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Support -p: prompt the user whether to run each command - line and read a line from the terminal. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES - bool "Enable single and double quotes and backslash" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Support quoting in the input. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT - bool "Enable -x: exit if -s or -n is exceeded" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Support -x: exit if the command size (see the -s or -n option) - is exceeded. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM - bool "Enable -0: NUL-terminated input" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Support -0: input items are terminated by a NUL character - instead of whitespace, and the quotes and backslash - are not special. - -endmenu diff --git a/package/utils/busybox/config/init/Config.in b/package/utils/busybox/config/init/Config.in deleted file mode 100644 index 426289e31d..0000000000 --- a/package/utils/busybox/config/init/Config.in +++ /dev/null @@ -1,185 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Init Utilities" - -config BUSYBOX_CONFIG_BOOTCHARTD - bool "bootchartd" - default n - help - bootchartd is commonly used to profile the boot process - for the purpose of speeding it up. In this case, it is started - by the kernel as the init process. This is configured by adding - the init=/sbin/bootchartd option to the kernel command line. - - It can also be used to monitor the resource usage of a specific - application or the running system in general. In this case, - bootchartd is started interactively by running bootchartd start - and stopped using bootchartd stop. - -config BUSYBOX_CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER - bool "Compatible, bloated header" - default n - depends on BUSYBOX_CONFIG_BOOTCHARTD - help - Create extended header file compatible with "big" bootchartd. - "Big" bootchartd is a shell script and it dumps some - "convenient" info int the header, such as: - title = Boot chart for `hostname` (`date`) - system.uname = `uname -srvm` - system.release = `cat /etc/DISTRO-release` - system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount) - system.kernel.options = `cat /proc/cmdline` - This data is not mandatory for bootchart graph generation, - and is considered bloat. Nevertheless, this option - makes bootchartd applet to dump a subset of it. - -config BUSYBOX_CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE - bool "Support bootchartd.conf" - default n - depends on BUSYBOX_CONFIG_BOOTCHARTD - help - Enable reading and parsing of $PWD/bootchartd.conf - and /etc/bootchartd.conf files. -config BUSYBOX_CONFIG_HALT - bool "poweroff, halt, and reboot" - default y - help - Stop all processes and either halt, reboot, or power off the system. - -config BUSYBOX_CONFIG_FEATURE_CALL_TELINIT - bool "Call telinit on shutdown and reboot" - default n - depends on BUSYBOX_CONFIG_HALT && !BUSYBOX_CONFIG_INIT - help - Call an external program (normally telinit) to facilitate - a switch to a proper runlevel. - - This option is only available if you selected halt and friends, - but did not select init. - -config BUSYBOX_CONFIG_TELINIT_PATH - string "Path to telinit executable" - default "/sbin/telinit" - depends on BUSYBOX_CONFIG_FEATURE_CALL_TELINIT - help - When busybox halt and friends have to call external telinit - to facilitate proper shutdown, this path is to be used when - locating telinit executable. -config BUSYBOX_CONFIG_INIT - bool "init" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - depends on BROKEN - help - init is the first program run when the system boots. - -config BUSYBOX_CONFIG_FEATURE_USE_INITTAB - bool "Support reading an inittab file" - default y - depends on BUSYBOX_CONFIG_INIT - help - Allow init to read an inittab file when the system boot. - -config BUSYBOX_CONFIG_FEATURE_KILL_REMOVED - bool "Support killing processes that have been removed from inittab" - default n - depends on BUSYBOX_CONFIG_FEATURE_USE_INITTAB - help - When respawn entries are removed from inittab and a SIGHUP is - sent to init, this option will make init kill the processes - that have been removed. - -config BUSYBOX_CONFIG_FEATURE_KILL_DELAY - int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED - range 0 1024 - default 0 - depends on BUSYBOX_CONFIG_FEATURE_KILL_REMOVED - help - With nonzero setting, init sends TERM, forks, child waits N - seconds, sends KILL and exits. Setting it too high is unwise - (child will hang around for too long and could actually kill - the wrong process!) - -config BUSYBOX_CONFIG_FEATURE_INIT_SCTTY - bool "Run commands with leading dash with controlling tty" - default n - depends on BUSYBOX_CONFIG_INIT - help - If this option is enabled, init will try to give a controlling - tty to any command which has leading hyphen (often it's "-/bin/sh"). - More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)". - If device attached to STDIN_FILENO can be a ctty but is not yet - a ctty for other session, it will become this process' ctty. - This is not the traditional init behavour, but is often what you want - in an embedded system where the console is only accessed during - development or for maintenance. - NB: using cttyhack applet may work better. - -config BUSYBOX_CONFIG_FEATURE_INIT_SYSLOG - bool "Enable init to write to syslog" - default y - depends on BUSYBOX_CONFIG_INIT - -config BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET - bool "Be _extra_ quiet on boot" - default n - depends on BUSYBOX_CONFIG_INIT - help - Prevent init from logging some messages to the console during boot. - -config BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS - bool "Support dumping core for child processes (debugging only)" - default n - depends on BUSYBOX_CONFIG_INIT - help - If this option is enabled and the file /.init_enable_core - exists, then init will call setrlimit() to allow unlimited - core file sizes. If this option is disabled, processes - will not generate any core files. - -config BUSYBOX_CONFIG_FEATURE_INITRD - bool "Support running init from within an initrd (not initramfs)" - default n - depends on BUSYBOX_CONFIG_INIT - help - Legacy support for running init under the old-style initrd. Allows - the name linuxrc to act as init, and it doesn't assume init is PID 1. - - This does not apply to initramfs, which runs /init as PID 1 and - requires no special support. - -config BUSYBOX_CONFIG_INIT_TERMINAL_TYPE - string "Initial terminal type" - default "linux" - depends on BUSYBOX_CONFIG_INIT - help - This is the initial value set by init for the TERM environment - variable. This variable is used by programs which make use of - extended terminal capabilities. - - Note that on Linux, init attempts to detect serial terminal and - sets TERM to "vt102" if one is found. -config BUSYBOX_CONFIG_MESG - bool "mesg" - default n - help - Mesg controls access to your terminal by others. It is typically - used to allow or disallow other users to write to your terminal - -config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP - bool "Enable writing to tty only by group, not by everybody" - default n - depends on BUSYBOX_CONFIG_MESG - help - Usually, ttys are owned by group "tty", and "write" tool is - setgid to this group. This way, "mesg y" only needs to enable - "write by owning group" bit in tty mode. - - If you set this option to N, "mesg y" will enable writing - by anybody at all. This is not recommended. - -endmenu diff --git a/package/utils/busybox/config/libbb/Config.in b/package/utils/busybox/config/libbb/Config.in deleted file mode 100644 index 6475403b53..0000000000 --- a/package/utils/busybox/config/libbb/Config.in +++ /dev/null @@ -1,232 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Busybox Library Tuning" - -config BUSYBOX_CONFIG_FEATURE_SYSTEMD - bool "Enable systemd support" - default n - help - If you plan to use busybox daemons on a system where daemons - are controlled by systemd, enable this option. - If you don't use systemd, it is still safe to enable it, - but the downside is increased code size. -config BUSYBOX_CONFIG_FEATURE_RTMINMAX - bool "Support RTMIN[+n] and RTMAX[-n] signal names" - default n - help - Support RTMIN[+n] and RTMAX[-n] signal names - in kill, killall etc. This costs ~250 bytes. - -config BUSYBOX_CONFIG_PASSWORD_MINLEN - int "Minimum password length" - default 6 - range 5 32 - help - Minimum allowable password length. - -config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED - int "MD5: Trade bytes for speed (0:fast, 3:slow)" - default 2 - range 0 3 - help - Trade binary size versus speed for the md5sum algorithm. - Approximate values running uClibc and hashing - linux-2.4.4.tar.bz2 were: - user times (sec) text size (386) - 0 (fastest) 1.1 6144 - 1 1.4 5392 - 2 3.0 5088 - 3 (smallest) 5.1 4912 - -config BUSYBOX_CONFIG_FEATURE_FAST_TOP - bool "Faster /proc scanning code (+100 bytes)" - default y - help - This option makes top (and ps) ~20% faster (or 20% less CPU hungry), - but code size is slightly bigger. - -config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS - bool "Support for /etc/networks" - default n - help - Enable support for network names in /etc/networks. This is - a rarely used feature which allows you to use names - instead of IP/mask pairs in route command. - -config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS - bool "Use termios to manipulate the screen" - default n - depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP - help - This option allows utilities such as 'more' and 'top' to determine - the size of the screen. If you leave this disabled, your utilities - that display things on the screen will be especially primitive and - will be unable to determine the current screen size, and will be - unable to move the cursor. - -config BUSYBOX_CONFIG_FEATURE_EDITING - bool "Command line editing" - default y - help - Enable line editing (mainly for shell command line). - -config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN - int "Maximum length of input" - range 128 8192 - default 512 - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Line editing code uses on-stack buffers for storage. - You may want to decrease this parameter if your target machine - benefits from smaller stack usage. - -config BUSYBOX_CONFIG_FEATURE_EDITING_VI - bool "vi-style line editing commands" - default n - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Enable vi-style line editing. In shells, this mode can be - turned on and off with "set -o vi" and "set +o vi". - -config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY - int "History size" - # Don't allow way too big values here, code uses fixed "char *history[N]" struct member - range 0 9999 - default 256 - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Specify command history size (0 - disable). - -config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY - bool "History saving" - default n - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Enable history saving in shells. - -config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH - bool "Reverse history search" - default n - depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY - help - Enable readline-like Ctrl-R combination for reverse history search. - Increases code by about 0.5k. - -config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION - bool "Tab completion" - default y - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Enable tab completion. - -config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION - bool "Username completion" - default n - depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION - help - Enable username completion. - -config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT - bool "Fancy shell prompts" - default y - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Setting this option allows for prompts to use things like \w and - \$ and escape codes. - -config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL - bool "Query cursor position from terminal" - default n - depends on BUSYBOX_CONFIG_FEATURE_EDITING - help - Allow usage of "ESC [ 6 n" sequence. Terminal answers back with - current cursor position. This information is used to make line - editing more robust in some cases. - If you are not sure whether your terminals respond to this code - correctly, or want to save on code size (about 400 bytes), - then do not turn this option on. - -config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP - bool "Non-POSIX, but safer, copying to special nodes" - default y - help - With this option, "cp file symlink" will delete symlink - and create a regular file. This does not conform to POSIX, - but prevents a symlink attack. - Similarly, "cp file device" will not send file's data - to the device. (To do that, use "cat file >device") - -config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE - bool "Give more precise messages when copy fails (cp, mv etc)" - default n - help - Error messages with this feature enabled: - $ cp file /does_not_exist/file - cp: cannot create '/does_not_exist/file': Path does not exist - $ cp file /vmlinuz/file - cp: cannot stat '/vmlinuz/file': Path has non-directory component - If this feature is not enabled, they will be, respectively: - cp: cannot create '/does_not_exist/file': No such file or directory - cp: cannot stat '/vmlinuz/file': Not a directory - This will cost you ~60 bytes. - -config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB - int "Copy buffer size, in kilobytes" - range 1 1024 - default 4 - help - Size of buffer used by cp, mv, install, wget etc. - Buffers which are 4 kb or less will be allocated on stack. - Bigger buffers will be allocated with mmap, with fallback to 4 kb - stack buffer if mmap fails. - -config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS - bool "Skip rootfs in mount table" - default n - help - Ignore rootfs entry in mount table. - - In Linux, kernel has a special filesystem, rootfs, which is initially - mounted on /. It contains initramfs data, if kernel is configured - to have one. Usually, another file system is mounted over / early - in boot process, and therefore most tools which manipulate - mount table, such as df, will skip rootfs entry. - - However, some systems do not mount anything on /. - If you need to configure busybox for one of these systems, - you may find useful to turn this option off to make df show - initramfs statistic. - - Otherwise, choose Y. - -config BUSYBOX_CONFIG_MONOTONIC_SYSCALL - bool "Use clock_gettime(CLOCK_MONOTONIC) syscall" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring - time intervals (time, ping, traceroute etc need this). - Probably requires Linux 2.6+. If not selected, gettimeofday - will be used instead (which gives wrong results if date/time - is reset). - -config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR - bool "Use ioctl names rather than hex values in error messages" - default y - help - Use ioctl names rather than hex values in error messages - (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this - saves about 1400 bytes. - -config BUSYBOX_CONFIG_FEATURE_HWIB - bool "Support infiniband HW" - default n - help - Support for printing infiniband addresses in - network applets. - -endmenu diff --git a/package/utils/busybox/config/loginutils/Config.in b/package/utils/busybox/config/loginutils/Config.in deleted file mode 100644 index 8c32851a2b..0000000000 --- a/package/utils/busybox/config/loginutils/Config.in +++ /dev/null @@ -1,329 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Login/Password Management Utilities" - -config BUSYBOX_CONFIG_ADD_SHELL - bool "add-shell" - default n if BUSYBOX_CONFIG_DESKTOP - help - Add shells to /etc/shells. - -config BUSYBOX_CONFIG_REMOVE_SHELL - bool "remove-shell" - default n if BUSYBOX_CONFIG_DESKTOP - help - Remove shells from /etc/shells. - -config BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS - bool "Support for shadow passwords" - default y - help - Build support for shadow password in /etc/shadow. This file is only - readable by root and thus the encrypted passwords are no longer - publicly readable. - -config BUSYBOX_CONFIG_USE_BB_PWD_GRP - bool "Use internal password and group functions rather than system functions" - default n - help - If you leave this disabled, busybox will use the system's password - and group functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the password and group functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/password, /etc/group files (and your system will be - smaller, and I will get fewer emails asking about how glibc NSS - works). When this option is enabled, you will not be able to use - PAM to access remote LDAP password servers and whatnot. And if you - want hostname resolution to work with glibc, you still need the - /lib/libnss_* libraries. - - If you need to use glibc's nsswitch.conf mechanism - (e.g. if user/group database is NOT stored in /etc/passwd etc), - you must NOT use this option. - - If you enable this option, it will add about 1.5k. - -config BUSYBOX_CONFIG_USE_BB_SHADOW - bool "Use internal shadow password functions" - default n - depends on BUSYBOX_CONFIG_USE_BB_PWD_GRP && BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS - help - If you leave this disabled, busybox will use the system's shadow - password handling functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the shadow password functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/shadow file when handling shadow passwords. This - makes your system smaller (and I will get fewer emails asking about - how glibc NSS works). When this option is enabled, you will not be - able to use PAM to access shadow passwords from remote LDAP - password servers and whatnot. - -config BUSYBOX_CONFIG_USE_BB_CRYPT - bool "Use internal crypt functions" - default n - help - Busybox has internal DES and MD5 crypt functions. - They produce results which are identical to corresponding - standard C library functions. - - If you leave this disabled, busybox will use the system's - crypt functions. Most C libraries use large (~70k) - static buffers there, and also combine them with more general - DES encryption/decryption. - - For busybox, having large static buffers is undesirable, - especially on NOMMU machines. Busybox also doesn't need - DES encryption/decryption and can do with smaller code. - - If you enable this option, it will add about 4.8k of code - if you are building dynamically linked executable. - In static build, it makes code _smaller_ by about 1.2k, - and likely many kilobytes less of bss. - -config BUSYBOX_CONFIG_USE_BB_CRYPT_SHA - bool "Enable SHA256/512 crypt functions" - default n - depends on BUSYBOX_CONFIG_USE_BB_CRYPT - help - Enable this if you have passwords starting with "$5$" or "$6$" - in your /etc/passwd or /etc/shadow files. These passwords - are hashed using SHA256 and SHA512 algorithms. Support for them - was added to glibc in 2008. - With this option off, login will fail password check for any - user which has password encrypted with these algorithms. - -config BUSYBOX_CONFIG_ADDUSER - bool "adduser" - default n - help - Utility for creating a new user account. - -config BUSYBOX_CONFIG_FEATURE_ADDUSER_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_ADDUSER && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the adduser applet. - -config BUSYBOX_CONFIG_FEATURE_CHECK_NAMES - bool "Enable sanity check on user/group names in adduser and addgroup" - default n - depends on BUSYBOX_CONFIG_ADDUSER || BUSYBOX_CONFIG_ADDGROUP - help - Enable sanity check on user and group names in adduser and addgroup. - To avoid problems, the user or group name should consist only of - letters, digits, underscores, periods, at signs and dashes, - and not start with a dash (as defined by IEEE Std 1003.1-2001). - For compatibility with Samba machine accounts "$" is also supported - at the end of the user or group name. - -config BUSYBOX_CONFIG_FIRST_SYSTEM_ID - int "First valid system uid or gid for adduser and addgroup" - depends on BUSYBOX_CONFIG_ADDUSER || BUSYBOX_CONFIG_ADDGROUP - range 0 64900 - default 100 - help - First valid system uid or gid for adduser and addgroup - -config BUSYBOX_CONFIG_LAST_SYSTEM_ID - int "Last valid system uid or gid for adduser and addgroup" - depends on BUSYBOX_CONFIG_ADDUSER || BUSYBOX_CONFIG_ADDGROUP - range 0 64900 - default 999 - help - Last valid system uid or gid for adduser and addgroup - -config BUSYBOX_CONFIG_ADDGROUP - bool "addgroup" - default n - help - Utility for creating a new group account. - -config BUSYBOX_CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_ADDGROUP && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the addgroup applet. - -config BUSYBOX_CONFIG_FEATURE_ADDUSER_TO_GROUP - bool "Support for adding users to groups" - default n - depends on BUSYBOX_CONFIG_ADDGROUP - help - If called with two non-option arguments, - addgroup will add an existing user to an - existing group. - -config BUSYBOX_CONFIG_DELUSER - bool "deluser" - default n - help - Utility for deleting a user account. - -config BUSYBOX_CONFIG_DELGROUP - bool "delgroup" - default n - help - Utility for deleting a group account. - -config BUSYBOX_CONFIG_FEATURE_DEL_USER_FROM_GROUP - bool "Support for removing users from groups" - default n - depends on BUSYBOX_CONFIG_DELGROUP - help - If called with two non-option arguments, deluser - or delgroup will remove an user from a specified group. - -config BUSYBOX_CONFIG_GETTY - bool "getty" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - getty lets you log in on a tty. It is normally invoked by init. - - Note that you can save a few bytes by disabling it and - using login applet directly. - If you need to reset tty attributes before calling login, - this script approximates getty: - - exec /dev/$1 2>&1 || exit 1 - reset - stty sane; stty ispeed 38400; stty ospeed 38400 - printf "%s login: " "`hostname`" - read -r login - exec /bin/login "$login" - -config BUSYBOX_CONFIG_LOGIN - bool "login" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - login is used when signing onto a system. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_PAM - bool "Support for PAM (Pluggable Authentication Modules)" - default n - depends on DEVEL - depends on BUSYBOX_CONFIG_LOGIN - help - Use PAM in login(1) instead of direct access to password database. - - OpenWrt specific: - You should install libpam from the packages feed and compile it - before trying to build busysbox. - -config BUSYBOX_CONFIG_LOGIN_SCRIPTS - bool "Support for login scripts" - depends on BUSYBOX_CONFIG_LOGIN - default n - help - Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT - just prior to switching from root to logged-in user. - -config BUSYBOX_CONFIG_FEATURE_NOLOGIN - bool "Support for /etc/nologin" - default n - depends on BUSYBOX_CONFIG_LOGIN - help - The file /etc/nologin is used by (some versions of) login(1). - If it exists, non-root logins are prohibited. - -config BUSYBOX_CONFIG_FEATURE_SECURETTY - bool "Support for /etc/securetty" - default n - depends on BUSYBOX_CONFIG_LOGIN - help - The file /etc/securetty is used by (some versions of) login(1). - The file contains the device names of tty lines (one per line, - without leading /dev/) on which root is allowed to login. - -config BUSYBOX_CONFIG_PASSWD - bool "passwd" - default y - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - passwd changes passwords for user and group accounts. A normal user - may only change the password for his/her own account, the super user - may change the password for any account. The administrator of a group - may change the password for the group. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_FEATURE_PASSWD_WEAK_CHECK - bool "Check new passwords for weakness" - default y - depends on BUSYBOX_CONFIG_PASSWD - help - With this option passwd will refuse new passwords which are "weak". - -config BUSYBOX_CONFIG_CRYPTPW - bool "cryptpw" - default n - help - Encrypts the given password with the crypt(3) libc function - using the given salt. Debian has this utility under mkpasswd - name. Busybox provides mkpasswd as an alias for cryptpw. - -config BUSYBOX_CONFIG_CHPASSWD - bool "chpasswd" - default n - help - Reads a file of user name and password pairs from standard input - and uses this information to update a group of existing users. - -config BUSYBOX_CONFIG_SU - bool "su" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - su is used to become another user during a login session. - Invoked without a username, su defaults to becoming the super user. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_FEATURE_SU_SYSLOG - bool "Enable su to write to syslog" - default n - depends on BUSYBOX_CONFIG_SU - -config BUSYBOX_CONFIG_FEATURE_SU_CHECKS_SHELLS - bool "Enable su to check user's shell to be listed in /etc/shells" - depends on BUSYBOX_CONFIG_SU - default n - -config BUSYBOX_CONFIG_SULOGIN - bool "sulogin" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - sulogin is invoked when the system goes into single user - mode (this is done through an entry in inittab). - -config BUSYBOX_CONFIG_VLOCK - bool "vlock" - default n - help - Build the "vlock" applet which allows you to lock (virtual) terminals. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -endmenu diff --git a/package/utils/busybox/config/mailutils/Config.in b/package/utils/busybox/config/mailutils/Config.in deleted file mode 100644 index 8db30310be..0000000000 --- a/package/utils/busybox/config/mailutils/Config.in +++ /dev/null @@ -1,56 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -menu "Mail Utilities" - - - -config BUSYBOX_CONFIG_MAKEMIME - bool "makemime" - default n - help - Create MIME-formatted messages. - -config BUSYBOX_CONFIG_FEATURE_MIME_CHARSET - string "Default charset" - default n - depends on BUSYBOX_CONFIG_MAKEMIME || BUSYBOX_CONFIG_REFORMIME || BUSYBOX_CONFIG_SENDMAIL - help - Default charset of the message. - -config BUSYBOX_CONFIG_POPMAILDIR - bool "popmaildir" - default n - help - Simple yet powerful POP3 mail popper. Delivers content - of remote mailboxes to local Maildir. - -config BUSYBOX_CONFIG_FEATURE_POPMAILDIR_DELIVERY - bool "Allow message filters and custom delivery program" - default n - depends on BUSYBOX_CONFIG_POPMAILDIR - help - Allow to use a custom program to filter the content - of the message before actual delivery (-F "prog [args...]"). - Allow to use a custom program for message actual delivery - (-M "prog [args...]"). - -config BUSYBOX_CONFIG_REFORMIME - bool "reformime" - default n - help - Parse MIME-formatted messages. - -config BUSYBOX_CONFIG_FEATURE_REFORMIME_COMPAT - bool "Accept and ignore options other than -x and -X" - default n - depends on BUSYBOX_CONFIG_REFORMIME - help - Accept (for compatibility only) and ignore options - other than -x and -X. - -config BUSYBOX_CONFIG_SENDMAIL - bool "sendmail" - default n - help - Barebones sendmail. - -endmenu diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in deleted file mode 100644 index 1663be79b9..0000000000 --- a/package/utils/busybox/config/miscutils/Config.in +++ /dev/null @@ -1,766 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Miscellaneous Utilities" - -config BUSYBOX_CONFIG_CONSPY - bool "conspy" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - A text-mode VNC like program for Linux virtual terminals. - example: conspy NUM shared access to console num - or conspy -nd NUM screenshot of console num - or conspy -cs NUM poor man's GNU screen like -config BUSYBOX_CONFIG_LESS - bool "less" - default y - help - 'less' is a pager, meaning that it displays text files. It possesses - a wide array of features, and is an improvement over 'more'. - -config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES - int "Max number of input lines less will try to eat" - default 9999999 - depends on BUSYBOX_CONFIG_LESS - -config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS - bool "Enable bracket searching" - default n - depends on BUSYBOX_CONFIG_LESS - help - This option adds the capability to search for matching left and right - brackets, facilitating programming. - -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS - bool "Enable extra flags" - default n - depends on BUSYBOX_CONFIG_LESS - help - The extra flags provided do the following: - - The -M flag enables a more sophisticated status line. - The -m flag enables a simpler status line with a percentage. - -config BUSYBOX_CONFIG_FEATURE_LESS_MARKS - bool "Enable marks" - default n - depends on BUSYBOX_CONFIG_LESS - help - Marks enable positions in a file to be stored for easy reference. - -config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP - bool "Enable regular expressions" - default n - depends on BUSYBOX_CONFIG_LESS - help - Enable regular expressions, allowing complex file searches. - -config BUSYBOX_CONFIG_FEATURE_LESS_WINCH - bool "Enable automatic resizing on window size changes" - default n - depends on BUSYBOX_CONFIG_LESS - help - Makes less track window size changes. - -config BUSYBOX_CONFIG_FEATURE_LESS_ASK_TERMINAL - bool "Use 'tell me cursor position' ESC sequence to measure window" - default n - depends on BUSYBOX_CONFIG_FEATURE_LESS_WINCH - help - Makes less track window size changes. - If terminal size can't be retrieved and $LINES/$COLUMNS are not set, - this option makes less perform a last-ditch effort to find it: - position cursor to 999,999 and ask terminal to report real - cursor position using "ESC [ 6 n" escape sequence, then read stdin. - - This is not clean but helps a lot on serial lines and such. - -config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD - bool "Enable flag changes ('-' command)" - default n - depends on BUSYBOX_CONFIG_LESS - help - This enables the ability to change command-line flags within - less itself ('-' keyboard command). - -config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS - bool "Enable dynamic switching of line numbers" - default n - depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD - help - Enables "-N" command. -config BUSYBOX_CONFIG_NANDWRITE - bool "nandwrite" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Write to the specified MTD device, with bad blocks awareness - -config BUSYBOX_CONFIG_NANDDUMP - bool "nanddump" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Dump the content of raw NAND chip -config BUSYBOX_CONFIG_SETSERIAL - bool "setserial" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Retrieve or set Linux serial port. -config BUSYBOX_CONFIG_UBIATTACH - bool "ubiattach" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Attach MTD device to an UBI device. - -config BUSYBOX_CONFIG_UBIDETACH - bool "ubidetach" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Detach MTD device from an UBI device. - -config BUSYBOX_CONFIG_UBIMKVOL - bool "ubimkvol" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Create a UBI volume. - -config BUSYBOX_CONFIG_UBIRMVOL - bool "ubirmvol" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Delete a UBI volume. - -config BUSYBOX_CONFIG_UBIRSVOL - bool "ubirsvol" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Resize a UBI volume. - -config BUSYBOX_CONFIG_UBIUPDATEVOL - bool "ubiupdatevol" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Update a UBI volume. - -config BUSYBOX_CONFIG_ADJTIMEX - bool "adjtimex" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Adjtimex reads and optionally sets adjustment parameters for - the Linux clock adjustment algorithm. - -config BUSYBOX_CONFIG_BBCONFIG - bool "bbconfig" - default n - help - The bbconfig applet will print the config file with which - busybox was built. - -config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG - bool "Compress bbconfig data" - default n - depends on BUSYBOX_CONFIG_BBCONFIG - help - Store bbconfig data in compressed form, uncompress them on-the-fly - before output. - - If you have a really tiny busybox with few applets enabled (and - bunzip2 isn't one of them), the overhead of the decompressor might - be noticeable. Also, if you run executables directly from ROM - and have very little memory, this might not be a win. Otherwise, - you probably want this. - -config BUSYBOX_CONFIG_BEEP - bool "beep" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The beep applets beeps in a given freq/Hz. - -config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ - int "default frequency" - range 0 2147483647 - default 4000 - depends on BUSYBOX_CONFIG_BEEP - help - Frequency for default beep. - -config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS - int "default length" - range 0 2147483647 - default 30 - depends on BUSYBOX_CONFIG_BEEP - help - Length in ms for default beep. - -config BUSYBOX_CONFIG_CHAT - bool "chat" - default n - help - Simple chat utility. - -config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL - bool "Enable NOFAIL expect strings" - depends on BUSYBOX_CONFIG_CHAT - default n - help - When enabled expect strings which are started with a dash trigger - no-fail mode. That is when expectation is not met within timeout - the script is not terminated but sends next SEND string and waits - for next EXPECT string. This allows to compose far more flexible - scripts. - -config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI - bool "Force STDIN to be a TTY" - depends on BUSYBOX_CONFIG_CHAT - default n - help - Original chat always treats STDIN as a TTY device and sets for it - so-called raw mode. This option turns on such behaviour. - -config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR - bool "Enable implicit Carriage Return" - depends on BUSYBOX_CONFIG_CHAT - default n - help - When enabled make chat to terminate all SEND strings with a "\r" - unless "\c" is met anywhere in the string. - -config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS - bool "Swallow options" - depends on BUSYBOX_CONFIG_CHAT - default n - help - Busybox chat require no options. To make it not fail when used - in place of original chat (which has a bunch of options) turn - this on. - -config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES - bool "Support weird SEND escapes" - depends on BUSYBOX_CONFIG_CHAT - default n - help - Original chat uses some escape sequences in SEND arguments which - are not sent to device but rather performs special actions. - E.g. "\K" means to send a break sequence to device. - "\d" delays execution for a second, "\p" -- for a 1/100 of second. - Before turning this option on think twice: do you really need them? - -config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN - bool "Support variable-length ABORT conditions" - depends on BUSYBOX_CONFIG_CHAT - default n - help - Original chat uses fixed 50-bytes length ABORT conditions. Say N here. - -config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT - bool "Support revoking of ABORT conditions" - depends on BUSYBOX_CONFIG_CHAT - default n - help - Support CLR_ABORT directive. - -config BUSYBOX_CONFIG_CHRT - bool "chrt" - default n - help - manipulate real-time attributes of a process. - This requires sched_{g,s}etparam support in your libc. - -config BUSYBOX_CONFIG_CROND - bool "crond" - default y - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - Crond is a background daemon that parses individual crontab - files and executes commands on behalf of the users in question. - This is a port of dcron from slackware. It uses files of the - format /var/spool/cron/crontabs/ files, for example: - $ cat /var/spool/cron/crontabs/root - # Run daily cron jobs at 4:40 every day: - 40 4 * * * /etc/cron/daily > /dev/null 2>&1 - -config BUSYBOX_CONFIG_FEATURE_CROND_D - bool "Support option -d to redirect output to stderr" - depends on BUSYBOX_CONFIG_CROND - default n - help - -d sets loglevel to 0 (most verbose) and directs all output to stderr. - -config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL - bool "Report command output via email (using sendmail)" - default n - depends on BUSYBOX_CONFIG_CROND - help - Command output will be sent to corresponding user via email. - -config BUSYBOX_CONFIG_FEATURE_CROND_DIR - string "crond spool directory" - default "/var/spool/cron" - depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB - help - Location of crond spool. - -config BUSYBOX_CONFIG_CRONTAB - bool "crontab" - default y - help - Crontab manipulates the crontab for a particular user. Only - the superuser may specify a different user and/or crontab directory. - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_DC - bool "dc" - default n - help - Dc is a reverse-polish desk calculator which supports unlimited - precision arithmetic. - -config BUSYBOX_CONFIG_FEATURE_DC_LIBM - bool "Enable power and exp functions (requires libm)" - default n - depends on BUSYBOX_CONFIG_DC - help - Enable power and exp functions. - NOTE: This will require libm to be present for linking. - -config BUSYBOX_CONFIG_DEVFSD - bool "devfsd (obsolete)" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - This is deprecated and should NOT be used anymore. - Use linux >= 2.6 (optionally with hotplug) and mdev instead! - See docs/mdev.txt for detailed instructions on how to use mdev - instead. - - Provides compatibility with old device names on a devfs systems. - You should set it to true if you have devfs enabled. - The following keywords in devsfd.conf are supported: - "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", - "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", - "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". - - But only if they are written UPPERCASE!!!!!!!! - -config BUSYBOX_CONFIG_DEVFSD_MODLOAD - bool "Adds support for MODLOAD keyword in devsfd.conf" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - This actually doesn't work with busybox modutils but needs - the external modutils. - -config BUSYBOX_CONFIG_DEVFSD_FG_NP - bool "Enables the -fg and -np options" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - -fg Run the daemon in the foreground. - -np Exit after parsing the configuration file. - Do not poll for events. - -config BUSYBOX_CONFIG_DEVFSD_VERBOSE - bool "Increases logging (and size)" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - Increases logging to stderr or syslog. - -config BUSYBOX_CONFIG_FEATURE_DEVFS - bool "Use devfs names for all devices (obsolete)" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This is obsolete and should NOT be used anymore. - Use linux >= 2.6 (optionally with hotplug) and mdev instead! - - For legacy systems -- if there is no way around devfsd -- this - tells busybox to look for names like /dev/loop/0 instead of - /dev/loop0. If your /dev directory has normal names instead of - devfs names, you don't want this. - -config BUSYBOX_CONFIG_DEVMEM - bool "devmem" - default n - help - devmem is a small program that reads and writes from physical - memory using /dev/mem. - -config BUSYBOX_CONFIG_EJECT - bool "eject" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Used to eject cdroms. (defaults to /dev/cdrom) - -config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI - bool "SCSI support" - default n - depends on BUSYBOX_CONFIG_EJECT - help - Add the -s option to eject, this allows to eject SCSI-Devices and - usb-storage devices. - -config BUSYBOX_CONFIG_FBSPLASH - bool "fbsplash" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Shows splash image and progress bar on framebuffer device. - Can be used during boot phase of an embedded device. ~2kb. - Usage: - - use kernel option 'vga=xxx' or otherwise enable fb device. - - put somewhere fbsplash.cfg file and an image in .ppm format. - - $ setsid fbsplash [params] & - -c: hide cursor - -d /dev/fbN: framebuffer device (if not /dev/fb0) - -s path_to_image_file (can be "-" for stdin) - -i path_to_cfg_file (can be "-" for stdin) - -f path_to_fifo (can be "-" for stdin) - - if you want to run it only in presence of kernel parameter: - grep -q "fbsplash=on" = 2.6.13 - -config BUSYBOX_CONFIG_INOTIFYD - bool "inotifyd" - default n # doesn't build on Knoppix 5 - help - Simple inotify daemon. Reports filesystem changes. Requires - kernel >= 2.6.13 - -config BUSYBOX_CONFIG_LAST - bool "last" - default n - depends on BUSYBOX_CONFIG_FEATURE_WTMP - help - 'last' displays a list of the last users that logged into the system. - -choice - prompt "Choose last implementation" - depends on BUSYBOX_CONFIG_LAST - default BUSYBOX_CONFIG_FEATURE_LAST_FANCY - -config BUSYBOX_CONFIG_FEATURE_LAST_SMALL - bool "small" - help - This is a small version of last with just the basic set of - features. - -config BUSYBOX_CONFIG_FEATURE_LAST_FANCY - bool "huge" - help - 'last' displays detailed information about the last users that - logged into the system (mimics sysvinit last). +900 bytes. -endchoice - -config BUSYBOX_CONFIG_HDPARM - bool "hdparm" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Get/Set hard drive parameters. Primarily intended for ATA - drives. Adds about 13k (or around 30k if you enable the - FEATURE_HDPARM_GET_IDENTITY option).... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY - bool "Support obtaining detailed information directly from drives" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the -I and -i options to obtain detailed information - directly from drives about their capabilities and supported ATA - feature set. If no device name is specified, hdparm will read - identify data from stdin. Enabling this option will add about 16k... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF - bool "Register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -R' option to register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF - bool "Un-register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -U' option to un-register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET - bool "Perform device reset (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -w' option to perform a device reset. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - bool "Tristate device for hotswap (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -x' option to tristate device for hotswap, - and the '-b' option to get/set bus state. This is dangerous - stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA - bool "Get/set using_dma flag" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -d' option to get/set using_dma flag. - -config BUSYBOX_CONFIG_LOCK - bool "lock" - default y - help - Small utility for using locks in scripts - -config BUSYBOX_CONFIG_MAKEDEVS - bool "makedevs" - default n - help - 'makedevs' is a utility used to create a batch of devices with - one command. - - There are two choices for command line behaviour, the interface - as used by LEAF/Linux Router Project, or a device table file. - - 'leaf' is traditionally what busybox follows, it allows multiple - devices of a particluar type to be created per command. - e.g. /dev/hda[0-9] - Device properties are passed as command line arguments. - - 'table' reads device properties from a file or stdin, allowing - a batch of unrelated devices to be made with one command. - User/group names are allowed as an alternative to uid/gid. - -choice - prompt "Choose makedevs behaviour" - depends on BUSYBOX_CONFIG_MAKEDEVS - default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF - bool "leaf" - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - bool "table" - -endchoice - -config BUSYBOX_CONFIG_MAN - bool "man" - default n - help - Format and display manual pages. - -config BUSYBOX_CONFIG_MICROCOM - bool "microcom" - default n - help - The poor man's minicom utility for chatting with serial port devices. - -config BUSYBOX_CONFIG_MOUNTPOINT - bool "mountpoint" - default n - help - mountpoint checks if the directory is a mountpoint. - -config BUSYBOX_CONFIG_MT - bool "mt" - default n - help - mt is used to control tape devices. You can use the mt utility - to advance or rewind a tape past a specified number of archive - files on the tape. - -config BUSYBOX_CONFIG_RAIDAUTORUN - bool "raidautorun" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - raidautorun tells the kernel md driver to - search and start RAID arrays. - -config BUSYBOX_CONFIG_READAHEAD - bool "readahead" - default n - depends on BUSYBOX_CONFIG_LFS - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Preload the files listed on the command line into RAM cache so that - subsequent reads on these files will not block on disk I/O. - - This applet just calls the readahead(2) system call on each file. - It is mainly useful in system startup scripts to preload files - or executables before they are used. When used at the right time - (in particular when a CPU bound process is running) it can - significantly speed up system startup. - - As readahead(2) blocks until each file has been read, it is best to - run this applet as a background job. - -config BUSYBOX_CONFIG_RFKILL - bool "rfkill" - default n # doesn't build on Ubuntu 9.04 - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Enable/disable wireless devices. - - rfkill list : list all wireless devices - rfkill list bluetooth : list all bluetooth devices - rfkill list 1 : list device corresponding to the given index - rfkill block|unblock wlan : block/unblock all wlan(wifi) devices - -config BUSYBOX_CONFIG_RUNLEVEL - bool "runlevel" - default n - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - find the current and previous system runlevel. - - This applet uses utmp but does not rely on busybox supporing - utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. - -config BUSYBOX_CONFIG_RX - bool "rx" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Receive files using the Xmodem protocol. - -config BUSYBOX_CONFIG_SETSID - bool "setsid" - default n - help - setsid runs a program in a new session - -config BUSYBOX_CONFIG_STRINGS - bool "strings" - default y - help - strings prints the printable character sequences for each file - specified. - -config BUSYBOX_CONFIG_TASKSET - bool "taskset" - default n # doesn't build on some non-x86 targets (m68k) - help - Retrieve or set a processes's CPU affinity. - This requires sched_{g,s}etaffinity support in your libc. - -config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY - bool "Fancy output" - default n - depends on BUSYBOX_CONFIG_TASKSET - help - Add code for fancy output. This merely silences a compiler-warning - and adds about 135 Bytes. May be needed for machines with alot - of CPUs. - -config BUSYBOX_CONFIG_TIME - bool "time" - default y - help - The time command runs the specified program with the given arguments. - When the command finishes, time writes a message to standard output - giving timing statistics about this program run. - -config BUSYBOX_CONFIG_TIMEOUT - bool "timeout" - default n - help - Runs a program and watches it. If it does not terminate in - specified number of seconds, it is sent a signal. - -config BUSYBOX_CONFIG_TTYSIZE - bool "ttysize" - default n - help - A replacement for "stty size". Unlike stty, can report only width, - only height, or both, in any order. It also does not complain on - error, but returns default 80x24. - Usage in shell scripts: width=`ttysize w`. - -config BUSYBOX_CONFIG_VOLNAME - bool "volname" - default n - help - Prints a CD-ROM volume name. - -config BUSYBOX_CONFIG_WALL - bool "wall" - default n - depends on BUSYBOX_CONFIG_FEATURE_UTMP - help - Write a message to all users that are logged in. - -config BUSYBOX_CONFIG_WATCHDOG - bool "watchdog" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The watchdog utility is used with hardware or software watchdog - device drivers. It opens the specified watchdog device special file - and periodically writes a magic character to the device. If the - watchdog applet ever fails to write the magic character within a - certain amount of time, the watchdog device assumes the system has - hung, and will cause the hardware to reboot. - -endmenu diff --git a/package/utils/busybox/config/modutils/Config.in b/package/utils/busybox/config/modutils/Config.in deleted file mode 100644 index 77f98581fd..0000000000 --- a/package/utils/busybox/config/modutils/Config.in +++ /dev/null @@ -1,269 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Module Utilities" - -config BUSYBOX_CONFIG_MODINFO - bool "modinfo" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Show information about a Linux Kernel module - -config BUSYBOX_CONFIG_MODPROBE_SMALL - bool "Simplified modutils" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Simplified modutils. - - With this option modprobe does not require modules.dep file - and does not use /etc/modules.conf file. - It scans module files in /lib/modules/`uname -r` and - determines dependencies and module alias names on the fly. - This may make module loading slower, most notably - when one needs to load module by alias (this requires - scanning through module _bodies_). - - At the first attempt to load a module by alias modprobe - will try to generate modules.dep.bb file in order to speed up - future loads by alias. Failure to do so (read-only /lib/modules, - etc) is not reported, and future modprobes will be slow too. - - NB: modules.dep.bb file format is not compatible - with modules.dep file as created/used by standard module tools. - - Additional module parameters can be stored in - /etc/modules/$module_name files. - - Apart from modprobe, other utilities are also provided: - - insmod is an alias to modprobe - - rmmod is an alias to modprobe -r - - depmod generates modules.dep.bb - - As of 2008-07, this code is experimental. It is 14kb smaller - than "non-small" modutils. - -config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE - bool "Accept module options on modprobe command line" - default n - depends on BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Allow insmod and modprobe take module options from command line. - -config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED - bool "Skip loading of already loaded modules" - default n - depends on BUSYBOX_CONFIG_MODPROBE_SMALL - help - Check if the module is already loaded. - -config BUSYBOX_CONFIG_INSMOD - bool "insmod" - default y - depends on !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - insmod is used to load specified modules in the running kernel. - -config BUSYBOX_CONFIG_RMMOD - bool "rmmod" - default y - depends on !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - rmmod is used to unload specified modules from the kernel. - -config BUSYBOX_CONFIG_LSMOD - bool "lsmod" - default y - depends on !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - lsmod is used to display a list of loaded modules. - -config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT - bool "Pretty output" - default y - depends on BUSYBOX_CONFIG_LSMOD - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This option makes output format of lsmod adjusted to - the format of module-init-tools for Linux kernel 2.6. - Increases size somewhat. - -config BUSYBOX_CONFIG_MODPROBE - bool "modprobe" - default n - depends on !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Handle the loading of modules, and their dependencies on a high - level. - -config BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST - bool "Blacklist support" - default n - depends on BUSYBOX_CONFIG_MODPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Say 'y' here to enable support for the 'blacklist' command in - modprobe.conf. This prevents the alias resolver to resolve - blacklisted modules. This is useful if you want to prevent your - hardware autodetection scripts to load modules like evdev, frame - buffer drivers etc. - -config BUSYBOX_CONFIG_DEPMOD - bool "depmod" - default n - depends on !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - depmod generates modules.dep (and potentially modules.alias - and modules.symbols) that contain dependency information - for modprobe. - -comment "Options common to multiple modutils" - -config BUSYBOX_CONFIG_FEATURE_2_4_MODULES - bool "Support version 2.2/2.4 Linux kernels" - default n - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_LSMOD - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support module loading for 2.2.x and 2.4.x Linux kernels. - This increases size considerably. Say N unless you plan - to run ancient kernels. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP - bool "Try to load module from a mmap'ed area" - default n - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This option causes module loading code to try to mmap - module first. If it does not work (for example, - it does not work for compressed modules), module will be read - (and unpacked if needed) into a memory block allocated by malloc. - - The only case when mmap works but malloc does not is when - you are trying to load a big module on a very memory-constrained - machine. Malloc will momentarily need 2x as much memory as mmap. - - Choosing N saves about 250 bytes of code (on 32-bit x86). - -config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING - bool "Enable module version checking" - default n - depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support checking of versions for modules. This is used to - ensure that the kernel and module are made for each other. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS - bool "Add module symbols to kernel symbol table" - default n - depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - By adding module symbols to the kernel symbol table, Oops messages - occuring within kernel modules can be properly debugged. By enabling - this feature, module symbols will always be added to the kernel symbol - table for proper debugging support. If you are not interested in - Oops messages from kernel modules, say N. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM - bool "In kernel memory optimization (uClinux only)" - default n - depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && (BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE) - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This is a special uClinux only memory optimization that lets insmod - load the specified kernel module directly into kernel space, reducing - memory usage by preventing the need for two copies of the module - being loaded into memory. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP - bool "Enable insmod load map (-m) option" - default n - depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && BUSYBOX_CONFIG_INSMOD - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Enabling this, one would be able to get a load map - output on stdout. This makes kernel module debugging - easier. - If you don't plan to debug kernel modules, you - don't need this option. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL - bool "Symbols in load map" - default n - depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Without this option, -m will only output section - load map. With this option, -m will also output - symbols load map. - -config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE - bool "Support tainted module checking with new kernels" - default y - depends on (BUSYBOX_CONFIG_LSMOD || BUSYBOX_CONFIG_FEATURE_2_4_MODULES) && !BUSYBOX_CONFIG_MODPROBE_SMALL - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support checking for tainted modules. These are usually binary - only modules that will make the linux-kernel list ignore your - support request. - This option is required to support GPLONLY modules. - -config BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS - bool "Support for module.aliases file" - default n - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Generate and parse modules.alias containing aliases for bus - identifiers: - alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs - - and aliases for logical modules names e.g.: - alias padlock_aes aes - alias aes_i586 aes - alias aes_generic aes - - Say Y if unsure. - -config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS - bool "Support for module.symbols file" - default n - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Generate and parse modules.symbols containing aliases for - symbol_request() kernel calls, such as: - alias symbol:usb_sg_init usbcore - - Say Y if unsure. - -config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR - string "Default directory containing modules" - default "/lib/modules" - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO - help - Directory that contains kernel modules. - Defaults to "/lib/modules" - -config BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE - string "Default name of modules.dep" - default "modules.dep" - depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO - help - Filename that contains kernel modules dependencies. - Defaults to "modules.dep" - -endmenu diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in deleted file mode 100644 index 442eb03428..0000000000 --- a/package/utils/busybox/config/networking/Config.in +++ /dev/null @@ -1,1088 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Networking Utilities" - -config BUSYBOX_CONFIG_NAMEIF - bool "nameif" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IFNAMSIZ = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX - -config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED - bool "Extended nameif" - default n - depends on BUSYBOX_CONFIG_NAMEIF - help - This extends the nameif syntax to support the bus_info, driver, - phyaddr selectors. The syntax is compatible to the normal nameif. - File format: - new_interface_name driver=asix bus=usb-0000:00:08.2-3 - new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 - new_interface_name phy_address=2 00:80:C8:38:91:B5 - new_interface_name mac=00:80:C8:38:91:B5 - new_interface_name 00:80:C8:38:91:B5 -config BUSYBOX_CONFIG_NBDCLIENT - bool "nbd-client" - default n - help - Network block device client -config BUSYBOX_CONFIG_NC - bool "nc" - default y - help - A simple Unix utility which reads and writes data across network - connections. - -config BUSYBOX_CONFIG_NC_SERVER - bool "Netcat server options (-l)" - default n - depends on BUSYBOX_CONFIG_NC - help - Allow netcat to act as a server. - -config BUSYBOX_CONFIG_NC_EXTRA - bool "Netcat extensions (-eiw and filename)" - default n - depends on BUSYBOX_CONFIG_NC - help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). - -config BUSYBOX_CONFIG_NC_110_COMPAT - bool "Netcat 1.10 compatibility (+2.5k)" - default n # off specially for Rob - depends on BUSYBOX_CONFIG_NC - help - This option makes nc closely follow original nc-1.10. - The code is about 2.5k bigger. It enables - -s ADDR, -n, -u, -v, -o FILE, -z options, but loses - busybox-specific extensions: -f FILE and -ll. -config BUSYBOX_CONFIG_PING - bool "ping" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. - -config BUSYBOX_CONFIG_PING6 - bool "ping6" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING - help - This will give you a ping that can talk IPv6. - -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool "Enable fancy ping output" - default y - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. -config BUSYBOX_CONFIG_WHOIS - bool "whois" - default n - help - whois is a client for the whois directory service - -config BUSYBOX_CONFIG_FEATURE_IPV6 - bool "Enable IPv6 support" - default IPV6 - help - Enable IPv6 support in busybox. - This adds IPv6 support in the networking applets. - -config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL - bool "Enable Unix domain socket support (usually not needed)" - default n - help - Enable Unix domain socket support in all busybox networking - applets. Address of the form local:/path/to/unix/socket - will be recognized. - - This extension is almost never used in real world usage. - You most likely want to say N. - -config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS - bool "Prefer IPv4 addresses from DNS queries" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 - help - Use IPv4 address of network host if it has one. - - If this option is off, the first returned address will be used. - This may cause problems when your DNS server is IPv6-capable and - is returning IPv6 host addresses too. If IPv6 address - precedes IPv4 one in DNS reply, busybox network applets - (e.g. wget) will use IPv6 address. On an IPv6-incapable host - or network applets will fail to connect to the host - using IPv6 address. - -config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS - bool "Verbose resolution errors" - default y - help - Enable if you are not satisfied with simplistic - "can't resolve 'hostname.com'" and want to know more. - This may increase size of your executable a bit. - -config BUSYBOX_CONFIG_ARP - bool "arp" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Manipulate the system ARP cache. - -config BUSYBOX_CONFIG_ARPING - bool "arping" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Ping hosts by ARP packets. - -config BUSYBOX_CONFIG_BRCTL - bool "brctl" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Manage ethernet bridges. - Supports addbr/delbr and addif/delif. - -config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY - bool "Fancy options" - default y - depends on BUSYBOX_CONFIG_BRCTL - help - Add support for extended option like: - setageing, setfd, sethello, setmaxage, - setpathcost, setportprio, setbridgeprio, - stp - This adds about 600 bytes. - -config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW - bool "Support show" - default y - depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY - help - Add support for option which prints the current config: - show - -config BUSYBOX_CONFIG_DNSD - bool "dnsd" - default n - help - Small and static DNS server daemon. - -config BUSYBOX_CONFIG_ETHER_WAKE - bool "ether-wake" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Send a magic packet to wake up sleeping machines. - -config BUSYBOX_CONFIG_FAKEIDENTD - bool "fakeidentd" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - fakeidentd listens on the ident port and returns a predefined - fake value on any query. - -config BUSYBOX_CONFIG_FTPD - bool "ftpd" - default n - help - simple FTP daemon. You have to run it via inetd. - -config BUSYBOX_CONFIG_FEATURE_FTP_WRITE - bool "Enable upload commands" - default n - depends on BUSYBOX_CONFIG_FTPD - help - Enable all kinds of FTP upload commands (-w option) - -config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST - bool "Enable workaround for RFC-violating clients" - default n - depends on BUSYBOX_CONFIG_FTPD - help - Some ftp clients (among them KDE's Konqueror) issue illegal - "LIST -l" requests. This option works around such problems. - It might prevent you from listing files starting with "-" and - it increases the code size by ~40 bytes. - Most other ftp servers seem to behave similar to this. - -config BUSYBOX_CONFIG_FTPGET - bool "ftpget" - default n - help - Retrieve a remote file via FTP. - -config BUSYBOX_CONFIG_FTPPUT - bool "ftpput" - default n - help - Store a remote file via FTP. - -config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS - bool "Enable long options in ftpget/ftpput" - default n - depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) - help - Support long options for the ftpget/ftpput applet. - -config BUSYBOX_CONFIG_HOSTNAME - bool "hostname" - default n - help - Show or set the system's host name. - -config BUSYBOX_CONFIG_HTTPD - bool "httpd" - default n - help - Serve web pages via an HTTP server. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES - bool "Support 'Ranges:' header" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Makes httpd emit "Accept-Ranges: bytes" header and understand - "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted - downloads, seeking in multimedia players etc. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE - bool "Use sendfile system call" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - When enabled, httpd will use the kernel sendfile() function - instead of read/write loop. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID - bool "Enable -u option" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows the server to run as a specific user - rather than defaulting to the user that starts the server. - Use of this option requires special privileges to change to a - different user. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - bool "Enable Basic http Authentication" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 - bool "Support MD5 crypted passwords for http Authentication" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - help - Enables basic per URL authentication from /etc/httpd.conf - using md5 passwords. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - bool "Support Common Gateway Interface (CGI)" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows scripts and executables to be invoked - when specific URLs are requested. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Support for running scripts through an interpreter" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - This option enables support for running scripts through an - interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an additional line in your httpd - config file: - *.php:/path/to/your/php - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool "Set REMOTE_PORT environment variable for CGI" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - Use of this option can assist scripts in generating - references that contain a unique port number. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool "Enable -e option (useful for CGIs written as shell scripts)" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows html encoding of arbitrary strings for display - by the browser. Output goes to stdout. - For example, httpd -e "" produces - "<Hello World>". - -config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES - bool "Support for custom error pages" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows you to define custom error pages in - the configuration file instead of the default HTTP status - error pages. For instance, if you add the line: - E404:/path/e404.html - in the config file, the server will respond the specified - '/path/e404.html' file instead of the terse '404 NOT FOUND' - message. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY - bool "Support for reverse proxy" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows you to define URLs that will be forwarded - to another HTTP server. To setup add the following line to the - configuration file - P:/url/:http://hostname[:port]/new/path/ - Then a request to /url/myfile will be forwarded to - http://hostname[:port]/new/path/myfile. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP - bool "Support for GZIP content encoding" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Makes httpd send files using GZIP content encoding if the - client supports it and a pre-compressed .gz exists. - -config BUSYBOX_CONFIG_IFCONFIG - bool "ifconfig" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Ifconfig is used to configure the kernel-resident network interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS - bool "Enable status reporting output (+7k)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - If ifconfig is called with no arguments it will display the status - of the currently active interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP - bool "Enable slip-specific options \"keepalive\" and \"outfill\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow "keepalive" and "outfill" support for SLIP. If you're not - planning on using serial lines, leave this unchecked. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ - bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow the start address for shared memory, start address for I/O, - and/or the interrupt line used by the specified device. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW - bool "Enable option \"hw\" (ether only)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' - class. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS - bool "Set the broadcast automatically" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Setting this will make ifconfig attempt to find the broadcast - automatically if the value '+' is used. - -config BUSYBOX_CONFIG_IFENSLAVE - bool "ifenslave" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Userspace application to bind several interfaces - to a logical interface (use with kernel bonding driver). - -config BUSYBOX_CONFIG_IFPLUGD - bool "ifplugd" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Network interface plug detection daemon. - -config BUSYBOX_CONFIG_IFUPDOWN - bool "ifupdown" - default n - help - Activate or deactivate the specified interfaces. This applet makes - use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of - course you could use non-busybox versions of these programs, so - against my better judgement (since this will surely result in plenty - of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig", "route" and "run-parts" or the "ip" command, either - via busybox or via standalone utilities. - -config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH - string "Absolute path to ifstate file" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - ifupdown keeps state information in a file called ifstate. - Typically it is located in /var/run/ifstate, however - some distributions tend to put it in other places - (debian, for example, uses /etc/network/run/ifstate). - This config option defines location of ifstate. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - bool "Use ip applet" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older 'ifconfig' and 'route' utilities. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool "Use busybox ip applet" - default n - depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_IP - select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - select BUSYBOX_CONFIG_FEATURE_IP_LINK - select BUSYBOX_CONFIG_FEATURE_IP_ROUTE - help - Use the busybox iproute "ip" applet to implement "ifupdown". - - If left disabled, you must install the full-blown iproute2 - utility or the "ifup" and "ifdown" applets will not work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN - bool "Use busybox ifconfig and route applets" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_IFCONFIG - select BUSYBOX_CONFIG_ROUTE - help - Use the busybox iproute "ifconfig" and "route" applets to - implement the "ifup" and "ifdown" utilities. - - If left disabled, you must install the full-blown ifconfig - and route utilities, or the "ifup" and "ifdown" applets will not - work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool "Support for IPv4" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If you want ifup/ifdown to talk IPv4, leave this on. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool "Support for IPv6" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 - help - If you need support for IPv6, turn this option on. - -### UNUSED -###config FEATURE_IFUPDOWN_IPX -### bool "Support for IPX" -### default y -### depends on IFUPDOWN -### help -### If this option is selected you can use busybox to work with IPX -### networks. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING - bool "Enable mapping support" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - This enables support for the "mapping" stanza, unless you have - a weird network setup you don't need it. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP - bool "Support for external dhcp clients" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - This enables support for the external dhcp clients. Clients are - tried in the following order: dhcpcd, dhclient, pump and udhcpc. - Otherwise, if udhcpc applet is enabled, it is used. - Otherwise, ifup/ifdown will have no support for DHCP. - -config BUSYBOX_CONFIG_INETD - bool "inetd" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - Internet superserver daemon - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO - bool "Support echo service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Echo received data internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD - bool "Support discard service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Internet /dev/null internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME - bool "Support time service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return 32 bit time since 1900 internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME - bool "Support daytime service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return human-readable time internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN - bool "Support chargen service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Familiar character generator internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_RPC - bool "Support RPC services" - default n - depends on BUSYBOX_CONFIG_INETD - select BUSYBOX_CONFIG_FEATURE_HAVE_RPC - help - Support Sun-RPC based services - -config BUSYBOX_CONFIG_IP - bool "ip" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with - TCP/IP. - -config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - bool "ip address" - default n - depends on BUSYBOX_CONFIG_IP - help - Address manipulation support for the "ip" applet. - -config BUSYBOX_CONFIG_FEATURE_IP_LINK - bool "ip link" - default n - depends on BUSYBOX_CONFIG_IP - help - Configure network devices with "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - bool "ip route" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for routing table management to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - bool "ip tunnel" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for tunneling commands to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_RULE - bool "ip rule" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for rule commands to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands" - default n - depends on BUSYBOX_CONFIG_IP - help - Also support short-form of ip commands: - ip addr -> ipaddr - ip link -> iplink - ip route -> iproute - ip tunnel -> iptunnel - ip rule -> iprule - - Say N unless you desparately need the short form of the ip - object commands. - -config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS - bool "Support displaying rarely used link types" - default n - depends on BUSYBOX_CONFIG_IP - help - If you are not going to use links of type "frad", "econet", - "bif" etc, you probably don't need to enable this. - Ethernet, wireless, infrared, ppp/slip, ip tunnelling - link types are supported without this option selected. - -config BUSYBOX_CONFIG_IPADDR - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - -config BUSYBOX_CONFIG_IPLINK - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK - -config BUSYBOX_CONFIG_IPROUTE - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE - -config BUSYBOX_CONFIG_IPTUNNEL - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - -config BUSYBOX_CONFIG_IPRULE - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE - -config BUSYBOX_CONFIG_IPCALC - bool "ipcalc" - default n - help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. - -config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY - bool "Fancy IPCALC, more options, adds 1 kbyte" - default n - depends on BUSYBOX_CONFIG_IPCALC - help - Adds the options hostname, prefix and silent to the output of - "ipcalc". - -config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the ipcalc applet. - -config BUSYBOX_CONFIG_NETMSG - bool "netmsg" - default y - help - simple program for sending udp broadcast messages - -config BUSYBOX_CONFIG_NETSTAT - bool "netstat" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - netstat prints information about the Linux networking subsystem. - -config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE - bool "Enable wide netstat output" - default y - depends on BUSYBOX_CONFIG_NETSTAT - help - Add support for wide columns. Useful when displaying IPv6 addresses - (-W option). - -config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG - bool "Enable PID/Program name output" - default y - depends on BUSYBOX_CONFIG_NETSTAT - help - Add support for -p flag to print out PID and program name. - +700 bytes of code. - -config BUSYBOX_CONFIG_NSLOOKUP - bool "nslookup" - default y - help - nslookup is a tool to query Internet name servers. - -config BUSYBOX_CONFIG_NTPD - bool "ntpd" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The NTP client/server daemon. - -config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER - bool "Make ntpd usable as a NTP server" - default y - depends on BUSYBOX_CONFIG_NTPD - help - Make ntpd usable as a NTP server. If you disable this option - ntpd will be usable only as a NTP client. - -config BUSYBOX_CONFIG_PSCAN - bool "pscan" - default n - help - Simple network port scanner. - -config BUSYBOX_CONFIG_ROUTE - bool "route" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Route displays or manipulates the kernel's IP routing tables. - -config BUSYBOX_CONFIG_SLATTACH - bool "slattach" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - slattach is a small utility to attach network interfaces to serial - lines. - -#config TC -# bool "tc" -# default y -# help -# show / manipulate traffic control settings -# -#config FEATURE_TC_INGRESS -# def_bool n -# depends on TC - -config BUSYBOX_CONFIG_TCPSVD - bool "tcpsvd" - default n - help - tcpsvd listens on a TCP port and runs a program for each new - connection. - -config BUSYBOX_CONFIG_TELNET - bool "telnet" - default y - help - Telnet is an interface to the TELNET protocol, but is also commonly - used to test other simple protocols. - -config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE - bool "Pass TERM type to remote host" - default y - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that - things like ANSI colors and other control sequences behave. - -config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN - bool "Pass USER type to remote host" - default n - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the USER environment variable to the - remote host you are connecting to. This is useful when you need to - log into a machine without telling the username (autologin). This - option enables `-a' and `-l USER' arguments. - -config BUSYBOX_CONFIG_TELNETD - bool "telnetd" - default y - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a - more secure alternative, you should seriously consider installing the - very small Dropbear SSH daemon instead: - http://matt.ucc.asn.au/dropbear/dropbear.html - - Note that for busybox telnetd to work you need several things: - First of all, your kernel needs: - UNIX98_PTYS=y - DEVPTS_FS=y - - Next, you need a /dev/pts directory on your root filesystem: - - $ ls -ld /dev/pts - drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ - - Next you need the pseudo terminal master multiplexer /dev/ptmx: - - $ ls -la /dev/ptmx - crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx - - Any /dev/ttyp[0-9]* files you may have can be removed. - Next, you need to mount the devpts filesystem on /dev/pts using: - - mount -t devpts devpts /dev/pts - - You need to be sure that busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make - certain that Busybox has been installed setuid root: - - chown root.root /bin/busybox - chmod 4755 /bin/busybox - - with all that done, telnetd _should_ work.... - - -config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE - bool "Support standalone telnetd (not inetd only)" - default y - depends on BUSYBOX_CONFIG_TELNETD - help - Selecting this will make telnetd able to run standalone. - -config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT - bool "Support -w SEC option (inetd wait mode)" - default n - depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE - help - This option allows you to run telnetd in "inet wait" mode. - Example inetd.conf line (note "wait", not usual "nowait"): - - telnet stream tcp wait root /bin/telnetd telnetd -w10 - - In this example, inetd passes _listening_ socket_ as fd 0 - to telnetd when connection appears. - telnetd will wait for connections until all existing - connections are closed, and no new connections - appear during 10 seconds. Then it exits, and inetd continues - to listen for new connections. - - This option is rarely used. "tcp nowait" is much more usual - way of running tcp services, including telnetd. - You most probably want to say N here. - -config BUSYBOX_CONFIG_TFTP - bool "tftp" - default n - help - This enables the Trivial File Transfer Protocol client program. TFTP - is usually used for simple, small transfers such as a root image - for a network-enabled bootloader. - -config BUSYBOX_CONFIG_TFTPD - bool "tftpd" - default n - help - This enables the Trivial File Transfer Protocol server program. - It expects that stdin is a datagram socket and a packet - is already pending on it. It will exit after one transfer. - In other words: it should be run from inetd in nowait mode, - or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" - -comment "Common options for tftp/tftpd" - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - -config BUSYBOX_CONFIG_FEATURE_TFTP_GET - bool "Enable 'tftp get' and/or tftpd upload code" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Add support for the GET command within the TFTP client. This allows - a client to retrieve a file from a TFTP server. - Also enable upload support in tftpd, if tftpd is selected. - - Note: this option does _not_ make tftpd capable of download - (the usual operation people need from it)! - -config BUSYBOX_CONFIG_FEATURE_TFTP_PUT - bool "Enable 'tftp put' and/or tftpd download code" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Add support for the PUT command within the TFTP client. This allows - a client to transfer a file to a TFTP server. - Also enable download support in tftpd, if tftpd is selected. - -config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool "Enable 'blksize' and 'tsize' protocol options" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Allow tftp to specify block size, and tftpd to understand - "blksize" and "tsize" options. - -config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR - bool "Enable tftp progress meter" - default n - depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - help - Show progress bar. - -config BUSYBOX_CONFIG_TFTP_DEBUG - bool "Enable debug" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Make tftp[d] print debugging messages on stderr. - This is useful if you are diagnosing a bug in tftp[d]. - -config BUSYBOX_CONFIG_TRACEROUTE - bool "traceroute" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Utility to trace the route of IP packets. - -config BUSYBOX_CONFIG_TRACEROUTE6 - bool "traceroute6" - default n - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE - help - Utility to trace the route of IPv6 packets. - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE - bool "Enable verbose output" - default y - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add some verbosity to traceroute. This includes among other things - hostnames and ICMP response types. - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE - bool "Enable loose source route" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option to specify a loose source route gateway - (8 maximum). - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP - bool "Use ICMP instead of UDP" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option -I to use ICMP ECHO instead of UDP datagrams. - -config BUSYBOX_CONFIG_TUNCTL - bool "tunctl" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - tunctl creates or deletes tun devices. - -config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG - bool "Support owner:group assignment" - default n - depends on BUSYBOX_CONFIG_TUNCTL - help - Allow to specify owner and group of newly created interface. - 340 bytes of pure bloat. Say no here. - -source package/utils/busybox/config/networking/udhcp/Config.in - -config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS - string "ifup udhcpc command line options" - default "-R -n" - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC - help - Command line options to pass to udhcpc from ifup. - Intended to alter options not available in /etc/network/interfaces. - (IE: --syslog --background etc...) - -config BUSYBOX_CONFIG_UDPSVD - bool "udpsvd" - default n - help - udpsvd listens on an UDP port and runs a program for each new - connection. - -config BUSYBOX_CONFIG_VCONFIG - bool "vconfig" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Creates, removes, and configures VLAN interfaces - -config BUSYBOX_CONFIG_WGET - bool "wget" - default y - help - wget is a utility for non-interactive download of files from HTTP, - HTTPS, and FTP servers. - -config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" - default y - depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool "Enable HTTP authentication" - default y - depends on BUSYBOX_CONFIG_WGET - help - Support authenticated HTTP transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default y - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the wget applet. - -config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT - bool "Enable read timeout option -T SEC" - default n - depends on BUSYBOX_CONFIG_WGET - help - Supports network read timeout for wget, so that wget will give - up and timeout when reading network data, through the -T command - line option. Currently only network data read timeout is - supported (i.e., timeout is not applied to the DNS nor TCP - connection initialization). When FEATURE_WGET_LONG_OPTIONS is - also enabled, the --timeout option will work in addition to -T. - -config BUSYBOX_CONFIG_ZCIP - bool "zcip" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. - It's a daemon that allocates and defends a dynamically assigned - address on the 169.254/16 network, requiring no system administrator. - - See http://www.zeroconf.org for further details, and "zcip.script" - in the busybox examples. - -endmenu diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in deleted file mode 100644 index f4d26ec9c8..0000000000 --- a/package/utils/busybox/config/networking/udhcp/Config.in +++ /dev/null @@ -1,155 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - - - -config BUSYBOX_CONFIG_UDHCPD - bool "udhcp server (udhcpd)" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - udhcpd is a DHCP server geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - -config BUSYBOX_CONFIG_DHCPRELAY - bool "dhcprelay" - default n - depends on BUSYBOX_CONFIG_UDHCPD - help - dhcprelay listens for dhcp requests on one or more interfaces - and forwards these requests to a different interface or dhcp - server. - -config BUSYBOX_CONFIG_DUMPLEASES - bool "Lease display utility (dumpleases)" - default n - depends on BUSYBOX_CONFIG_UDHCPD - help - dumpleases displays the leases written out by the udhcpd server. - Lease times are stored in the file by time remaining in lease, or - by the absolute time that it expires in seconds from epoch. - -config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY - bool "Rewrite the lease file at every new acknowledge" - default n - depends on BUSYBOX_CONFIG_UDHCPD - help - If selected, udhcpd will write a new file with leases every - time a new lease has been accepted, thus eliminating the need - to send SIGUSR1 for the initial writing or updating. Any timed - rewriting remains undisturbed. - -config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC - bool "Select IP address based on client MAC" - default n - depends on BUSYBOX_CONFIG_UDHCPD - help - If selected, udhcpd will base its selection of IP address to offer - on the client's hardware address. Otherwise udhcpd uses the next - consecutive free address. - - This reduces the frequency of IP address changes for clients - which let their lease expire, and makes consecutive DHCPOFFERS - for the same client to (almost always) contain the same - IP address. - -config BUSYBOX_CONFIG_DHCPD_LEASES_FILE - string "Absolute path to lease file" - default "/var/run/udhcpd.leases" - depends on BUSYBOX_CONFIG_UDHCPD - help - udhcpd stores addresses in a lease file. This is the absolute path - of the file. Normally it is safe to leave it untouched. - -config BUSYBOX_CONFIG_UDHCPC - bool "udhcp client (udhcpc)" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - udhcpc is a DHCP client geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - - The udhcp client negotiates a lease with the DHCP server and - runs a script when a lease is obtained or lost. - -config BUSYBOX_CONFIG_FEATURE_UDHCPC_ARPING - bool "Verify that the offered address is free, using ARP ping" - default n - depends on BUSYBOX_CONFIG_UDHCPC - help - If selected, udhcpc will send ARP probes and make sure - the offered address is really not in use by anyone. The client - will DHCPDECLINE the offer if the address is in use, - and restart the discover process. - -config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT - bool "Enable '-P port' option for udhcpd and udhcpc" - default n - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - At the cost of ~300 bytes, enables -P port option. - This feature is typically not needed. - -config BUSYBOX_CONFIG_UDHCP_DEBUG - int "Maximum verbosity level for udhcp applets (0..9)" - default 0 - range 0 9 - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY - help - Verbosity can be increased with multiple -v options. - This option controls how high it can be cranked up. - - Bigger values result in bigger code. Levels above 1 - are very verbose and useful for debugging only. - -config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397 - bool "Support for RFC3397 domain search (experimental)" - default y - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - If selected, both client and server will support passing of domain - search lists via option 119, specified in RFC 3397, - and SIP servers option 120, specified in RFC 3361. - -config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q - bool "Support for 802.1Q VLAN parameters" - default n - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - If selected, both client and server will support passing of VLAN - ID and priority via options 132 and 133 as per 802.1Q. - -config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT - string "Absolute path to config script" - default "/usr/share/udhcpc/default.script" - depends on BUSYBOX_CONFIG_UDHCPC - help - This script is called after udhcpc receives an answer. See - examples/udhcp for a working example. Normally it is safe - to leave this untouched. - -config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS - int "DHCP options slack buffer size" - default 80 - range 0 924 - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - Some buggy DHCP servers send DHCP offer packets with option - field larger than we expect (which might also be considered a - buffer overflow attempt). These packets are normally discarded. - If circumstances beyond your control force you to support such - servers, this may help. The upper limit (924) makes dhcpc accept - even 1500 byte packets (maximum-sized ethernet packets). - - This option does not make dhcp[cd] emit non-standard - sized packets. - - Known buggy DHCP servers: - 3Com OfficeConnect Remote 812 ADSL Router: - seems to confuse maximum allowed UDP packet size with - maximum size of entire IP packet, and sends packets which are - 28 bytes too large. - Seednet (ISP) VDSL: sends packets 2 bytes too large. diff --git a/package/utils/busybox/config/nfsmount b/package/utils/busybox/config/nfsmount new file mode 100644 index 0000000000..3343c7d959 --- /dev/null +++ b/package/utils/busybox/config/nfsmount @@ -0,0 +1,2 @@ +CONFIG_FEATURE_HAVE_RPC=y +CONFIG_FEATURE_MOUNT_NFS=y diff --git a/package/utils/busybox/config/printutils/Config.in b/package/utils/busybox/config/printutils/Config.in deleted file mode 100644 index ca2ea9f56c..0000000000 --- a/package/utils/busybox/config/printutils/Config.in +++ /dev/null @@ -1,29 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Print Utilities" - - - -config BUSYBOX_CONFIG_LPD - bool "lpd" - default n - help - lpd is a print spooling daemon. - -config BUSYBOX_CONFIG_LPR - bool "lpr" - default n - help - lpr sends files (or standard input) to a print spooling daemon. - -config BUSYBOX_CONFIG_LPQ - bool "lpq" - default n - help - lpq is a print spool queue examination and manipulation program. - -endmenu diff --git a/package/utils/busybox/config/procps/Config.in b/package/utils/busybox/config/procps/Config.in deleted file mode 100644 index d8d72a75e7..0000000000 --- a/package/utils/busybox/config/procps/Config.in +++ /dev/null @@ -1,260 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Process Utilities" - -config BUSYBOX_CONFIG_IOSTAT - bool "iostat" - default n - help - Report CPU and I/O statistics -config BUSYBOX_CONFIG_MPSTAT - bool "mpstat" - default n - help - Per-processor statistics -config BUSYBOX_CONFIG_NMETER - bool "nmeter" - default n - help - Prints selected system stats continuously, one line per update. -config BUSYBOX_CONFIG_PMAP - bool "pmap" - default n - help - Display processes' memory mappings. -config BUSYBOX_CONFIG_POWERTOP - bool "powertop" - default n - help - Analyze power consumption on Intel-based laptops -config BUSYBOX_CONFIG_PSTREE - bool "pstree" - default n - help - Display a tree of processes. -config BUSYBOX_CONFIG_PWDX - bool "pwdx" - default n - help - Report current working directory of a process -config BUSYBOX_CONFIG_SMEMCAP - bool "smemcap" - default n - help - smemcap is a tool for capturing process data for smem, - a memory usage statistic tool. -config BUSYBOX_CONFIG_UPTIME - bool "uptime" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo() - help - uptime gives a one line display of the current time, how long - the system has been running, how many users are currently logged - on, and the system load averages for the past 1, 5, and 15 minutes. - -config BUSYBOX_CONFIG_FEATURE_UPTIME_UTMP_SUPPORT - bool "Support for showing the number of users" - default n - depends on BUSYBOX_CONFIG_UPTIME && BUSYBOX_CONFIG_FEATURE_UTMP - help - Makes uptime display the number of users currently logged on. - -config BUSYBOX_CONFIG_FREE - bool "free" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo() - help - free displays the total amount of free and used physical and swap - memory in the system, as well as the buffers used by the kernel. - The shared memory column should be ignored; it is obsolete. - -config BUSYBOX_CONFIG_FUSER - bool "fuser" - default n - help - fuser lists all PIDs (Process IDs) that currently have a given - file open. fuser can also list all PIDs that have a given network - (TCP or UDP) port open. - -config BUSYBOX_CONFIG_KILL - bool "kill" - default y - help - The command kill sends the specified signal to the specified - process or process group. If no signal is specified, the TERM - signal is sent. - -config BUSYBOX_CONFIG_KILLALL - bool "killall" - default y - depends on BUSYBOX_CONFIG_KILL - help - killall sends a signal to all processes running any of the - specified commands. If no signal name is specified, SIGTERM is - sent. - -config BUSYBOX_CONFIG_KILLALL5 - bool "killall5" - default n - depends on BUSYBOX_CONFIG_KILL - -config BUSYBOX_CONFIG_PGREP - bool "pgrep" - default y - help - Look for processes by name. - -config BUSYBOX_CONFIG_PIDOF - bool "pidof" - default y - help - Pidof finds the process id's (pids) of the named programs. It prints - those id's on the standard output. - -config BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE - bool "Enable argument for single shot (-s)" - default n - depends on BUSYBOX_CONFIG_PIDOF - help - Support argument '-s' for returning only the first pid found. - -config BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT - bool "Enable argument for omitting pids (-o)" - default n - depends on BUSYBOX_CONFIG_PIDOF - help - Support argument '-o' for omitting the given pids in output. - The special pid %PPID can be used to name the parent process - of the pidof, in other words the calling shell or shell script. - -config BUSYBOX_CONFIG_PKILL - bool "pkill" - default n - help - Send signals to processes by name. - -config BUSYBOX_CONFIG_PS - bool "ps" - default y - help - ps gives a snapshot of the current processes. - -config BUSYBOX_CONFIG_FEATURE_PS_WIDE - bool "Enable wide output option (-w)" - default y - depends on BUSYBOX_CONFIG_PS - help - Support argument 'w' for wide output. - If given once, 132 chars are printed, and if given more - than once, the length is unlimited. - -config BUSYBOX_CONFIG_FEATURE_PS_TIME - bool "Enable time and elapsed time output" - default n - depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Support -o time and -o etime output specifiers. - -config BUSYBOX_CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS - bool "Enable additional ps columns" - default n - depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP - help - Support -o rgroup, -o ruser, -o nice output specifiers. - -config BUSYBOX_CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS - bool "Support Linux prior to 2.4.0 and non-ELF systems" - default n - depends on BUSYBOX_CONFIG_FEATURE_PS_TIME - help - Include support for measuring HZ on old kernels and non-ELF systems - (if you are on Linux 2.4.0+ and use ELF, you don't need this) - -config BUSYBOX_CONFIG_RENICE - bool "renice" - default n - help - Renice alters the scheduling priority of one or more running - processes. - -config BUSYBOX_CONFIG_BB_SYSCTL - bool "sysctl" - default y - help - Configure kernel parameters at runtime. - -config BUSYBOX_CONFIG_TOP - bool "top" - default y - help - The top program provides a dynamic real-time view of a running - system. - -config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - bool "Show CPU per-process usage percentage" - default y - depends on BUSYBOX_CONFIG_TOP - help - Make top display CPU usage for each process. - This adds about 2k. - -config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS - bool "Show CPU global usage percentage" - default y - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Makes top display "CPU: NN% usr NN% sys..." line. - This adds about 0.5k. - -config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU - bool "SMP CPU usage display ('c' key)" - default n - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS - help - Allow 'c' key to switch between individual/cumulative CPU stats - This adds about 0.5k. - -config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS - bool "Show 1/10th of a percent in CPU/mem statistics" - default n - depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Show 1/10th of a percent in CPU/mem statistics. - This adds about 0.3k. - -config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS - bool "Show CPU process runs on ('j' field)" - default n - depends on BUSYBOX_CONFIG_TOP - help - Show CPU where process was last found running on. - This is the 'j' field. - -config BUSYBOX_CONFIG_FEATURE_TOPMEM - bool "Topmem command ('s' key)" - default n - depends on BUSYBOX_CONFIG_TOP - help - Enable 's' in top (gives lots of memory info). - -config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS - bool "Support for showing threads in ps/pstree/top" - default n - depends on BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_PSTREE - help - Enables the ps -T option, showing of threads in pstree, - and 'h' command in top. - -config BUSYBOX_CONFIG_WATCH - bool "watch" - default n - help - watch is used to execute a program periodically, showing - output to the screen. - -endmenu diff --git a/package/utils/busybox/config/runit/Config.in b/package/utils/busybox/config/runit/Config.in deleted file mode 100644 index 9d7c5970a9..0000000000 --- a/package/utils/busybox/config/runit/Config.in +++ /dev/null @@ -1,90 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Runit Utilities" - - - -config BUSYBOX_CONFIG_RUNSV - bool "runsv" - default n - help - runsv starts and monitors a service and optionally an appendant log - service. - -config BUSYBOX_CONFIG_RUNSVDIR - bool "runsvdir" - default n - help - runsvdir starts a runsv process for each subdirectory, or symlink to - a directory, in the services directory dir, up to a limit of 1000 - subdirectories, and restarts a runsv process if it terminates. - -config BUSYBOX_CONFIG_FEATURE_RUNSVDIR_LOG - bool "Enable scrolling argument log" - depends on BUSYBOX_CONFIG_RUNSVDIR - default n - help - Enable feature where second parameter of runsvdir holds last error - message (viewable via top/ps). Otherwise (feature is off - or no parameter), error messages go to stderr only. - -config BUSYBOX_CONFIG_SV - bool "sv" - default n - help - sv reports the current status and controls the state of services - monitored by the runsv supervisor. - -config BUSYBOX_CONFIG_SV_DEFAULT_SERVICE_DIR - string "Default directory for services" - default "/var/service" - depends on BUSYBOX_CONFIG_SV - help - Default directory for services. - Defaults to "/var/service" - -config BUSYBOX_CONFIG_SVLOGD - bool "svlogd" - default n - help - svlogd continuously reads log data from its standard input, optionally - filters log messages, and writes the data to one or more automatically - rotated logs. - -config BUSYBOX_CONFIG_CHPST - bool "chpst" - default n - help - chpst changes the process state according to the given options, and - execs specified program. - -config BUSYBOX_CONFIG_SETUIDGID - bool "setuidgid" - default n - help - Sets soft resource limits as specified by options - -config BUSYBOX_CONFIG_ENVUIDGID - bool "envuidgid" - default n - help - Sets $UID to account's uid and $GID to account's gid - -config BUSYBOX_CONFIG_ENVDIR - bool "envdir" - default n - help - Sets various environment variables as specified by files - in the given directory - -config BUSYBOX_CONFIG_SOFTLIMIT - bool "softlimit" - default n - help - Sets soft resource limits as specified by options - -endmenu diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in deleted file mode 100644 index e7317ca810..0000000000 --- a/package/utils/busybox/config/selinux/Config.in +++ /dev/null @@ -1,125 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "SELinux Utilities" - depends on BUSYBOX_CONFIG_SELINUX - - - -config BUSYBOX_CONFIG_CHCON - bool "chcon" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to change the security context of file. - -config BUSYBOX_CONFIG_FEATURE_CHCON_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_CHCON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the chcon applet. - -config BUSYBOX_CONFIG_GETENFORCE - bool "getenforce" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to get the current mode of SELinux. - -config BUSYBOX_CONFIG_GETSEBOOL - bool "getsebool" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to get SELinux boolean values. - -config BUSYBOX_CONFIG_LOAD_POLICY - bool "load_policy" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to load SELinux policy. - -config BUSYBOX_CONFIG_MATCHPATHCON - bool "matchpathcon" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to get default security context of the - specified path from the file contexts configuration. - -config BUSYBOX_CONFIG_RESTORECON - bool "restorecon" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to relabel files. The feature is almost - the same as setfiles, but usage is a little different. - -config BUSYBOX_CONFIG_RUNCON - bool "runcon" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to run command in speficied security context. - -config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_RUNCON && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the runcon applet. - -config BUSYBOX_CONFIG_SELINUXENABLED - bool "selinuxenabled" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support for this command to be used within shell scripts - to determine if selinux is enabled. - -config BUSYBOX_CONFIG_SETENFORCE - bool "setenforce" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to modify the mode SELinux is running in. - -config BUSYBOX_CONFIG_SETFILES - bool "setfiles" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support to modify to relabel files. - Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64, - (It is default in libselinux's Makefile), you _must_ enable - CONFIG_LFS. - -config BUSYBOX_CONFIG_FEATURE_SETFILES_CHECK_OPTION - bool "Enable check option" - default n - depends on BUSYBOX_CONFIG_SETFILES - help - Support "-c" option (check the validity of the contexts against - the specified binary policy) for setfiles. Requires libsepol. - -config BUSYBOX_CONFIG_SETSEBOOL - bool "setsebool" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Enable support for change boolean. - semanage and -P option is not supported yet. - -config BUSYBOX_CONFIG_SESTATUS - bool "sestatus" - default n - depends on BUSYBOX_CONFIG_SELINUX - help - Displays the status of SELinux. - -endmenu diff --git a/package/utils/busybox/config/shell/Config.in b/package/utils/busybox/config/shell/Config.in deleted file mode 100644 index a271a386d6..0000000000 --- a/package/utils/busybox/config/shell/Config.in +++ /dev/null @@ -1,433 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Shells" - -config BUSYBOX_CONFIG_ASH - bool "ash" - default y - depends on !BUSYBOX_CONFIG_NOMMU - help - Tha 'ash' shell adds about 60k in the default configuration and is - the most complete and most pedantically correct shell included with - busybox. This shell is actually a derivative of the Debian 'dash' - shell (by Herbert Xu), which was created by porting the 'ash' shell - (written by Kenneth Almquist) from NetBSD. - -config BUSYBOX_CONFIG_ASH_BASH_COMPAT - bool "bash-compatible extensions" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable bash-compatible extensions. - -config BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT - bool "Idle timeout variable" - default n - depends on BUSYBOX_CONFIG_ASH - help - Enables bash-like auto-logout after $TMOUT seconds of idle time. - -config BUSYBOX_CONFIG_ASH_JOB_CONTROL - bool "Job control" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable job control in the ash shell. - -config BUSYBOX_CONFIG_ASH_ALIAS - bool "Alias support" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable alias support in the ash shell. - -config BUSYBOX_CONFIG_ASH_GETOPTS - bool "Builtin getopt to parse positional parameters" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for getopts builtin in ash. - -config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO - bool "Builtin version of 'echo'" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for echo builtin in ash. - -config BUSYBOX_CONFIG_ASH_BUILTIN_PRINTF - bool "Builtin version of 'printf'" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for printf builtin in ash. - -config BUSYBOX_CONFIG_ASH_BUILTIN_TEST - bool "Builtin version of 'test'" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for test builtin in ash. - -config BUSYBOX_CONFIG_ASH_CMDCMD - bool "'command' command to override shell builtins" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for the ash 'command' builtin, which allows - you to run the specified command with the specified arguments, - even when there is an ash builtin command with the same name. - -config BUSYBOX_CONFIG_ASH_MAIL - bool "Check for new mail on interactive shells" - default n - depends on BUSYBOX_CONFIG_ASH - help - Enable "check for new mail" function in the ash shell. - -config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE - bool "Optimize for size instead of speed" - default n - depends on BUSYBOX_CONFIG_ASH - help - Compile ash for reduced size at the price of speed. - -config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT - bool "Pseudorandom generator and $RANDOM variable" - default n - depends on BUSYBOX_CONFIG_ASH - help - Enable pseudorandom generator and dynamic variable "$RANDOM". - Each read of "$RANDOM" will generate a new pseudorandom value. - You can reset the generator by using a specified start value. - After "unset RANDOM" the generator will switch off and this - variable will no longer have special treatment. - -config BUSYBOX_CONFIG_ASH_EXPAND_PRMT - bool "Expand prompt string" - default y - depends on BUSYBOX_CONFIG_ASH - help - "PS#" may contain volatile content, such as backquote commands. - This option recreates the prompt string from the environment - variable each time it is displayed. - -config BUSYBOX_CONFIG_CTTYHACK - bool "cttyhack" - default n - help - One common problem reported on the mailing list is the "can't - access tty; job control turned off" error message, which typically - appears when one tries to use a shell with stdin/stdout on - /dev/console. - This device is special - it cannot be a controlling tty. - - The proper solution is to use the correct device instead of - /dev/console. - - cttyhack provides a "quick and dirty" solution to this problem. - It analyzes stdin with various ioctls, trying to determine whether - it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line). - On Linux it also checks sysfs for a pointer to the active console. - If cttyhack is able to find the real console device, it closes - stdin/out/err and reopens that device. - Then it executes the given program. Opening the device will make - that device a controlling tty. This may require cttyhack - to be a session leader. - - Example for /etc/inittab (for busybox init): - - ::respawn:/bin/cttyhack /bin/sh - - Starting an interactive shell from boot shell script: - - setsid cttyhack sh - - Giving controlling tty to shell running with PID 1: - - # exec cttyhack sh - - Without cttyhack, you need to know exact tty name, - and do something like this: - - # exec setsid sh -c 'exec sh /dev/tty1 2>&1' - -config BUSYBOX_CONFIG_HUSH - bool "hush" - default n - help - hush is a small shell (25k). It handles the normal flow control - constructs such as if/then/elif/else/fi, for/in/do/done, while loops, - case/esac. Redirections, here documents, $((arithmetic)) - and functions are supported. - - It will compile and work on no-mmu systems. - - It does not handle select, aliases, tilde expansion, - &>file and >&file redirection of stdout+stderr. - -config BUSYBOX_CONFIG_HUSH_BASH_COMPAT - bool "bash-compatible extensions" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable bash-compatible extensions. - -config BUSYBOX_CONFIG_HUSH_BRACE_EXPANSION - bool "Brace expansion" - default n - depends on BUSYBOX_CONFIG_HUSH_BASH_COMPAT - help - Enable {abc,def} extension. - -config BUSYBOX_CONFIG_HUSH_HELP - bool "help builtin" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable help builtin in hush. Code size + ~1 kbyte. - -config BUSYBOX_CONFIG_HUSH_INTERACTIVE - bool "Interactive mode" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable interactive mode (prompt and command editing). - Without this, hush simply reads and executes commands - from stdin just like a shell script from a file. - No prompt, no PS1/PS2 magic shell variables. - -config BUSYBOX_CONFIG_HUSH_SAVEHISTORY - bool "Save command history to .hush_history" - default n - depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE && BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY - help - Enable history saving in hush. - -config BUSYBOX_CONFIG_HUSH_JOB - bool "Job control" - default y - depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE - help - Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current - command (not entire shell), fg/bg builtins work. Without this option, - "cmd &" still works by simply spawning a process and immediately - prompting for next command (or executing next command in a script), - but no separate process group is formed. - -config BUSYBOX_CONFIG_HUSH_TICK - bool "Process substitution" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable process substitution `command` and $(command) in hush. - -config BUSYBOX_CONFIG_HUSH_IF - bool "Support if/then/elif/else/fi" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable if/then/elif/else/fi in hush. - -config BUSYBOX_CONFIG_HUSH_LOOPS - bool "Support for, while and until loops" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable for, while and until loops in hush. - -config BUSYBOX_CONFIG_HUSH_CASE - bool "Support case ... esac statement" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable case ... esac statement in hush. +400 bytes. - -config BUSYBOX_CONFIG_HUSH_FUNCTIONS - bool "Support funcname() { commands; } syntax" - default y - depends on BUSYBOX_CONFIG_HUSH - help - Enable support for shell functions in hush. +800 bytes. - -config BUSYBOX_CONFIG_HUSH_LOCAL - bool "Support local builtin" - default y - depends on BUSYBOX_CONFIG_HUSH_FUNCTIONS - help - Enable support for local variables in functions. - -config BUSYBOX_CONFIG_HUSH_RANDOM_SUPPORT - bool "Pseudorandom generator and $RANDOM variable" - default n - depends on BUSYBOX_CONFIG_HUSH - help - Enable pseudorandom generator and dynamic variable "$RANDOM". - Each read of "$RANDOM" will generate a new pseudorandom value. - -config BUSYBOX_CONFIG_HUSH_EXPORT_N - bool "Support 'export -n' option" - default y - depends on BUSYBOX_CONFIG_HUSH - help - export -n unexports variables. It is a bash extension. - -config BUSYBOX_CONFIG_HUSH_MODE_X - bool "Support 'hush -x' option and 'set -x' command" - default n - depends on BUSYBOX_CONFIG_HUSH - help - This instructs hush to print commands before execution. - Adds ~300 bytes. - -config BUSYBOX_CONFIG_MSH - bool "msh (deprecated: aliased to hush)" - default n - select BUSYBOX_CONFIG_HUSH - help - msh is deprecated and will be removed, please migrate to hush. - - -choice - prompt "Choose which shell is aliased to 'sh' name" - default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH - help - Choose which shell you want to be executed by 'sh' alias. - The ash shell is the most bash compatible and full featured one. - -# note: cannot use "select ASH" here, it breaks "make allnoconfig" -config BUSYBOX_CONFIG_FEATURE_SH_IS_ASH - depends on BUSYBOX_CONFIG_ASH - bool "ash" - depends on !BUSYBOX_CONFIG_NOMMU - -config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH - depends on BUSYBOX_CONFIG_HUSH - bool "hush" - -config BUSYBOX_CONFIG_FEATURE_SH_IS_NONE - bool "none" - -endchoice - -choice - prompt "Choose which shell is aliased to 'bash' name" - default BUSYBOX_CONFIG_FEATURE_BASH_IS_NONE - help - Choose which shell you want to be executed by 'bash' alias. - The ash shell is the most bash compatible and full featured one. - - Note that selecting this option does not switch on any bash - compatibility code. It merely makes it possible to install - /bin/bash (sym)link and run scripts which start with - #!/bin/bash line. - - Many systems use it in scripts which use bash-specific features, - even simple ones like $RANDOM. Without this option, busybox - can't be used for running them because it won't recongnize - "bash" as a supported applet name. - -config BUSYBOX_CONFIG_FEATURE_BASH_IS_ASH - depends on BUSYBOX_CONFIG_ASH - bool "ash" - depends on !BUSYBOX_CONFIG_NOMMU - -config BUSYBOX_CONFIG_FEATURE_BASH_IS_HUSH - depends on BUSYBOX_CONFIG_HUSH - bool "hush" - -config BUSYBOX_CONFIG_FEATURE_BASH_IS_NONE - bool "none" - -endchoice - - -config BUSYBOX_CONFIG_SH_MATH_SUPPORT - bool "POSIX math support" - default y - depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH - help - Enable math support in the shell via $((...)) syntax. - -config BUSYBOX_CONFIG_SH_MATH_SUPPORT_64 - bool "Extend POSIX math support to 64 bit" - default y - depends on BUSYBOX_CONFIG_SH_MATH_SUPPORT - help - Enable 64-bit math support in the shell. This will make the shell - slightly larger, but will allow computation with very large numbers. - This is not in POSIX, so do not rely on this in portable code. - -config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET - bool "Hide message on interactive shell startup" - default n - depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - help - Remove the busybox introduction when starting a shell. - -config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE - bool "Standalone shell" - default n - depends on (BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS - help - This option causes busybox shells to use busybox applets - in preference to executables in the PATH whenever possible. For - example, entering the command 'ifconfig' into the shell would cause - busybox to use the ifconfig busybox applet. Specifying the fully - qualified executable name, such as '/sbin/ifconfig' will still - execute the /sbin/ifconfig executable on the filesystem. This option - is generally used when creating a statically linked version of busybox - for use as a rescue shell, in the event that you screw up your system. - - This is implemented by re-execing /proc/self/exe (typically) - with right parameters. Some selected applets ("NOFORK" applets) - can even be executed without creating new process. - Instead, busybox will call _main() internally. - - However, this causes problems in chroot jails without mounted /proc - and with ps/top (command name can be shown as 'exe' for applets - started this way). -# untrue? -# Note that this will *also* cause applets to take precedence -# over shell builtins of the same name. So turning this on will -# eliminate any performance gained by turning on the builtin "echo" -# and "test" commands in ash. -# untrue? -# Note that when using this option, the shell will attempt to directly -# run '/bin/busybox'. If you do not have the busybox binary sitting in -# that exact location with that exact name, this option will not work at -# all. - -config BUSYBOX_CONFIG_FEATURE_SH_NOFORK - bool "Run 'nofork' applets directly" - default n - depends on (BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS - help - This option causes busybox shells to not execute typical - fork/exec/wait sequence, but call _main directly, - if possible. (Sometimes it is not possible: for example, - this is not possible in pipes). - - This will be done only for some applets (those which are marked - NOFORK in include/applets.h). - - This may significantly speed up some shell scripts. - - This feature is relatively new. Use with care. Report bugs - to project mailing list. - -config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE - bool "Use $HISTFILESIZE" - default n - depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - help - This option makes busybox shells to use $HISTFILESIZE variable - to set shell history size. Note that its max value is capped - by "History size" setting in library tuning section. - - -endmenu diff --git a/package/utils/busybox/config/sysklogd/Config.in b/package/utils/busybox/config/sysklogd/Config.in deleted file mode 100644 index 7f8f728361..0000000000 --- a/package/utils/busybox/config/sysklogd/Config.in +++ /dev/null @@ -1,154 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "System Logging Utilities" - - - -config BUSYBOX_CONFIG_SYSLOGD - bool "syslogd" - default n - help - The syslogd utility is used to record logs of all the - significant events that occur on a system. Every - message that is logged records the date and time of the - event, and will generally also record the name of the - application that generated the message. When used in - conjunction with klogd, messages from the Linux kernel - can also be recorded. This is terribly useful, - especially for finding what happened when something goes - wrong. And something almost always will go wrong if - you wait long enough.... - -config BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE - bool "Rotate message files" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - This enables syslogd to rotate the message files - on his own. No need to use an external rotatescript. - -config BUSYBOX_CONFIG_FEATURE_REMOTE_LOG - bool "Remote Log support" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - When you enable this feature, the syslogd utility can - be used to send system log messages to another system - connected via a network. This allows the remote - machine to log all the system messages, which can be - terribly useful for reducing the number of serial - cables you use. It can also be a very good security - measure to prevent system logs from being tampered with - by an intruder. - -config BUSYBOX_CONFIG_FEATURE_SYSLOGD_DUP - bool "Support -D (drop dups) option" - default n - depends on BUSYBOX_CONFIG_SYSLOGD - help - Option -D instructs syslogd to drop consecutive messages - which are totally the same. - -config BUSYBOX_CONFIG_FEATURE_SYSLOGD_CFG - bool "Support syslog.conf" - default n - depends on BUSYBOX_CONFIG_SYSLOGD - help - Supports restricted syslogd config. See docs/syslog.conf.txt - -config BUSYBOX_CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE - int "Read buffer size in bytes" - default 256 - range 256 20000 - depends on BUSYBOX_CONFIG_SYSLOGD - help - This option sets the size of the syslog read buffer. - Actual memory usage increases around five times the - change done here. - -config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG - bool "Circular Buffer support" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - When you enable this feature, the syslogd utility will - use a circular buffer to record system log messages. - When the buffer is filled it will continue to overwrite - the oldest messages. This can be very useful for - systems with little or no permanent storage, since - otherwise system logs can eventually fill up your - entire filesystem, which may cause your system to - break badly. - -config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE - int "Circular buffer size in Kbytes (minimum 4KB)" - default 16 - range 4 2147483647 - depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG - help - This option sets the size of the circular buffer - used to record system log messages. - -config BUSYBOX_CONFIG_LOGREAD - bool "logread" - default n - depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG && BROKEN - help - If you enabled Circular Buffer support, you almost - certainly want to enable this feature as well. This - utility will allow you to read the messages that are - stored in the syslogd circular buffer. - -config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING - bool "Double buffering" - default n - depends on BUSYBOX_CONFIG_LOGREAD - help - 'logread' ouput to slow serial terminals can have - side effects on syslog because of the semaphore. - This option make logread to double buffer copy - from circular buffer, minimizing semaphore - contention at some minor memory expense. - -config BUSYBOX_CONFIG_KLOGD - bool "klogd" - default n - help - klogd is a utility which intercepts and logs all - messages from the Linux kernel and sends the messages - out to the 'syslogd' utility so they can be logged. If - you wish to record the messages produced by the kernel, - you should enable this option. - -config BUSYBOX_CONFIG_FEATURE_KLOGD_KLOGCTL - bool "Use the klogctl() interface" - default y - depends on BUSYBOX_CONFIG_KLOGD - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The klogd applet supports two interfaces for reading - kernel messages. Linux provides the klogctl() interface - which allows reading messages from the kernel ring buffer - independently from the file system. - - If you answer 'N' here, klogd will use the more portable - approach of reading them from /proc or a device node. - However, this method requires the file to be available. - - If in doubt, say 'Y'. - -config BUSYBOX_CONFIG_LOGGER - bool "logger" - default y - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - The logger utility allows you to send arbitrary text - messages to the system log (i.e. the 'syslogd' utility) so - they can be logged. This is generally used to help locate - problems that occur within programs and scripts. - -endmenu diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in deleted file mode 100644 index d75841e487..0000000000 --- a/package/utils/busybox/config/util-linux/Config.in +++ /dev/null @@ -1,985 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux System Utilities" - -config BUSYBOX_CONFIG_BLOCKDEV - bool "blockdev" - default n - help - Performs some ioctls with block devices. -config BUSYBOX_CONFIG_REV - bool "rev" - default n - help - Reverse lines of a file or files. - -config BUSYBOX_CONFIG_ACPID - bool "acpid" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - acpid listens to ACPI events coming either in textual form from - /proc/acpi/event (though it is marked deprecated it is still widely - used and _is_ a standard) or in binary form from specified evdevs - (just use /dev/input/event*). - - It parses the event to retrieve ACTION and a possible PARAMETER. - It then spawns /etc/acpi/[/] either via run-parts - (if the resulting path is a directory) or directly as an executable. - - N.B. acpid relies on run-parts so have the latter installed. - -config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT - bool "Accept and ignore redundant options" - default n - depends on BUSYBOX_CONFIG_ACPID - help - Accept and ignore compatibility options -g -m -s -S -v. - -config BUSYBOX_CONFIG_BLKID - bool "blkid" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_VOLUMEID - help - Lists labels and UUIDs of all filesystems. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE - bool "Print filesystem type" - default n - depends on BUSYBOX_CONFIG_BLKID - help - Show TYPE="filesystem type" - -config BUSYBOX_CONFIG_DMESG - bool "dmesg" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - dmesg is used to examine or control the kernel ring buffer. When the - Linux kernel prints messages to the system log, they are stored in - the kernel ring buffer. You can use dmesg to print the kernel's ring - buffer, clear the kernel ring buffer, change the size of the kernel - ring buffer, and change the priority level at which kernel messages - are also logged to the system console. Enable this option if you - wish to enable the 'dmesg' utility. - -config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY - bool "Pretty dmesg output" - default y - depends on BUSYBOX_CONFIG_DMESG - help - If you wish to scrub the syslog level from the output, say 'Y' here. - The syslog level is a string prefixed to every line with the form - "<#>". - - With this option you will see: - # dmesg - Linux version 2.6.17.4 ..... - BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - - Without this option you will see: - # dmesg - <5>Linux version 2.6.17.4 ..... - <6>BIOS-provided physical RAM map: - <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - -config BUSYBOX_CONFIG_FBSET - bool "fbset" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - fbset is used to show or change the settings of a Linux frame buffer - device. The frame buffer device provides a simple and unique - interface to access a graphics display. Enable this option - if you wish to enable the 'fbset' utility. - -config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY - bool "Turn on extra fbset options" - default n - depends on BUSYBOX_CONFIG_FBSET - help - This option enables extended fbset options, allowing one to set the - framebuffer size, color depth, etc. interface to access a graphics - display. Enable this option if you wish to enable extended fbset - options. - -config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE - bool "Turn on fbset readmode support" - default n - depends on BUSYBOX_CONFIG_FBSET - help - This option allows fbset to read the video mode database stored by - default n /etc/fb.modes, which can be used to set frame buffer - device to pre-defined video modes. - -config BUSYBOX_CONFIG_FDFLUSH - bool "fdflush" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - fdflush is only needed when changing media on slightly-broken - removable media drives. It is used to make Linux believe that a - hardware disk-change switch has been actuated, which causes Linux to - forget anything it has cached from the previous media. If you have - such a slightly-broken drive, you will need to run fdflush every time - you change a disk. Most people have working hardware and can safely - leave this disabled. - -config BUSYBOX_CONFIG_FDFORMAT - bool "fdformat" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - fdformat is used to low-level format a floppy disk. - -config BUSYBOX_CONFIG_FDISK - bool "fdisk" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The fdisk utility is used to divide hard disks into one or more - logical disks, which are generally called partitions. This utility - can be used to list and edit the set of partitions or BSD style - 'disk slices' that are defined on a hard drive. - -config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS - bool "Support over 4GB disks" - default y - depends on BUSYBOX_CONFIG_FDISK - depends on !BUSYBOX_CONFIG_LFS # with LFS no special code is needed - help - Enable this option to support large disks > 4GB. - -config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - bool "Write support" - default n - depends on BUSYBOX_CONFIG_FDISK - help - Enabling this option allows you to create or change a partition table - and write those changes out to disk. If you leave this option - disabled, you will only be able to view the partition table. - -config BUSYBOX_CONFIG_FEATURE_AIX_LABEL - bool "Support AIX disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change AIX disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_SGI_LABEL - bool "Support SGI disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SGI disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_SUN_LABEL - bool "Support SUN disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SUN disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_OSF_LABEL - bool "Support BSD disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change BSD disklabels - and define and edit BSD disk slices. - -config BUSYBOX_CONFIG_FEATURE_GPT_LABEL - bool "Support GPT disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to view GUID Partition Table - disklabels. - -config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED - bool "Support expert mode" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to do terribly unsafe things like - define arbitrary drive geometry, move the beginning of data in a - partition, and similarly evil things. Unless you have a very good - reason you would be wise to leave this disabled. - -config BUSYBOX_CONFIG_FINDFS - bool "findfs" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_VOLUMEID - help - Prints the name of a filesystem with given label or UUID. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config BUSYBOX_CONFIG_FLOCK - bool "flock" - default n - help - Manage locks from shell scripts - -config BUSYBOX_CONFIG_FREERAMDISK - bool "freeramdisk" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Linux allows you to create ramdisks. This utility allows you to - delete them and completely free all memory that was used for the - ramdisk. For example, if you boot Linux into a ramdisk and later - pivot_root, you may want to free the memory that is allocated to the - ramdisk. If you have no use for freeing memory from a ramdisk, leave - this disabled. - -config BUSYBOX_CONFIG_FSCK_MINIX - bool "fsck_minix" - default n - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. It is not a journaling filesystem however and - can experience corruption if it is not properly unmounted or if the - power goes off in the middle of a write. This utility allows you to - check for and attempt to repair any corruption that occurs to a minix - filesystem. - -config BUSYBOX_CONFIG_MKFS_EXT2 - bool "mkfs_ext2" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Utility to create EXT2 filesystems. - -config BUSYBOX_CONFIG_MKFS_MINIX - bool "mkfs_minix" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. If you wish to be able to create minix - filesystems this utility will do the job for you. - -config BUSYBOX_CONFIG_FEATURE_MINIX2 - bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" - default n - depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX - help - If you wish to be able to create version 2 minix filesystems, enable - this. If you enabled 'mkfs_minix' then you almost certainly want to - be using the version 2 filesystem support. - -config BUSYBOX_CONFIG_MKFS_REISER - bool "mkfs_reiser" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Utility to create ReiserFS filesystems. - Note: this applet needs a lot of testing and polishing. - -config BUSYBOX_CONFIG_MKFS_VFAT - bool "mkfs_vfat" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Utility to create FAT32 filesystems. - -config BUSYBOX_CONFIG_GETOPT - bool "getopt" - default n - help - The getopt utility is used to break up (parse) options in command - lines to make it easy to write complex shell scripts that also check - for legal (and illegal) options. If you want to write horribly - complex shell scripts, or use some horribly complex shell script - written by others, this utility may be for you. Most people will - wisely leave this disabled. - -config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG - bool "Support option -l" - default n if BUSYBOX_CONFIG_LONG_OPTS - depends on BUSYBOX_CONFIG_GETOPT - help - Enable support for long options (option -l). - -config BUSYBOX_CONFIG_HEXDUMP - bool "hexdump" - default y - help - The hexdump utility is used to display binary data in a readable - way that is comparable to the output from most hex editors. - -config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE - bool "Support -R, reverse of 'hexdump -Cv'" - default n - depends on BUSYBOX_CONFIG_HEXDUMP - help - The hexdump utility is used to display binary data in an ascii - readable way. This option creates binary data from an ascii input. - NB: this option is non-standard. It's unwise to use it in scripts - aimed to be portable. - -config BUSYBOX_CONFIG_HD - bool "hd" - default n - depends on BUSYBOX_CONFIG_HEXDUMP - help - hd is an alias to hexdump -C. - -config BUSYBOX_CONFIG_HWCLOCK - bool "hwclock" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The hwclock utility is used to read and set the hardware clock - on a system. This is primarily used to set the current time on - shutdown in the hardware clock, so the hardware will keep the - correct time when Linux is _not_ running. - -config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS - bool "Support long options (--hctosys,...)" - default n - depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS - help - By default, the hwclock utility only uses short options. If you - are overly fond of its long options, such as --hctosys, --utc, etc) - then enable this option. - -config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS - bool "Use FHS /var/lib/hwclock/adjtime" - default n # util-linux-ng in Fedora 13 still uses /etc/adjtime - depends on BUSYBOX_CONFIG_HWCLOCK - help - Starting with FHS 2.3, the adjtime state file is supposed to exist - at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish - to use the FHS behavior, answer Y here, otherwise answer N for the - classic /etc/adjtime path. - - pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO - -config BUSYBOX_CONFIG_IPCRM - bool "ipcrm" - default n - help - The ipcrm utility allows the removal of System V interprocess - communication (IPC) objects and the associated data structures - from the system. - -config BUSYBOX_CONFIG_IPCS - bool "ipcs" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The ipcs utility is used to provide information on the currently - allocated System V interprocess (IPC) objects in the system. - -config BUSYBOX_CONFIG_LOSETUP - bool "losetup" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - losetup is used to associate or detach a loop device with a regular - file or block device, and to query the status of a loop device. This - version does not currently support enabling data encryption. - -config BUSYBOX_CONFIG_LSPCI - bool "lspci" - default n - #select PLATFORM_LINUX - help - lspci is a utility for displaying information about PCI buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/pci/devices) only. - -config BUSYBOX_CONFIG_LSUSB - bool "lsusb" - default n - #select PLATFORM_LINUX - help - lsusb is a utility for displaying information about USB buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/usb/devices) only. - -config BUSYBOX_CONFIG_MDEV - bool "mdev" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - mdev is a mini-udev implementation for dynamically creating device - nodes in the /dev directory. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_CONF - bool "Support /etc/mdev.conf" - default n - depends on BUSYBOX_CONFIG_MDEV - help - Add support for the mdev config file to control ownership and - permissions of the device nodes. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME - bool "Support subdirs/symlinks" - default n - depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF - help - Add support for renaming devices and creating symlinks. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP - bool "Support regular expressions substitutions when renaming device" - default n - depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME - help - Add support for regular expressions substitutions when renaming - device. - -config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC - bool "Support command execution at device addition/removal" - default n - depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF - help - This adds support for an optional field to /etc/mdev.conf for - executing commands when devices are created/removed. - - For more information, please see docs/mdev.txt - -config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE - bool "Support loading of firmwares" - default n - depends on BUSYBOX_CONFIG_MDEV - help - Some devices need to load firmware before they can be usable. - - These devices will request userspace look up the files in - /lib/firmware/ and if it exists, send it to the kernel for - loading into the hardware. - -config BUSYBOX_CONFIG_MKSWAP - bool "mkswap" - default y - help - The mkswap utility is used to configure a file or disk partition as - Linux swap space. This allows Linux to use the entire file or - partition as if it were additional RAM, which can greatly increase - the capability of low-memory machines. This additional memory is - much slower than real RAM, but can be very helpful at preventing your - applications being killed by the Linux out of memory (OOM) killer. - Once you have created swap space using 'mkswap' you need to enable - the swap space using the 'swapon' utility. - -config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID - bool "UUID support" - default n - depends on BUSYBOX_CONFIG_MKSWAP - help - Generate swap spaces with universally unique identifiers. - -config BUSYBOX_CONFIG_MORE - bool "more" - default n - help - more is a simple utility which allows you to read text one screen - sized page at a time. If you want to read text that is larger than - the screen, and you are using anything faster than a 300 baud modem, - you will probably find this utility very helpful. If you don't have - any need to reading text files, you can leave this disabled. - -config BUSYBOX_CONFIG_MOUNT - bool "mount" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - All files and filesystems in Unix are arranged into one big directory - tree. The 'mount' utility is used to graft a filesystem onto a - particular part of the tree. A filesystem can either live on a block - device, or it can be accessible over the network, as is the case with - NFS filesystems. Most people using BusyBox will also want to enable - the 'mount' utility. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE - bool "Support option -f" - default n - depends on BUSYBOX_CONFIG_MOUNT - help - Enable support for faking a file system mount. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE - bool "Support option -v" - default n - depends on BUSYBOX_CONFIG_MOUNT - help - Enable multi-level -v[vv...] verbose messages. Useful if you - debug mount problems and want to see what is exactly passed - to the kernel. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS - bool "Support mount helpers" - default y - depends on BUSYBOX_CONFIG_MOUNT - help - Enable mounting of virtual file systems via external helpers. - E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call - "obexfs -b00.11.22.33.44.55 /mnt" - Also "mount -t sometype [-o opts] fs /mnt" will try - "sometype [-o opts] fs /mnt" if simple mount syscall fails. - The idea is to use such virtual filesystems in /etc/fstab. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL - bool "Support specifying devices by label or UUID" - default n - depends on BUSYBOX_CONFIG_MOUNT - select BUSYBOX_CONFIG_VOLUMEID - help - This allows for specifying a device by label or uuid, rather than by - name. This feature utilizes the same functionality as blkid/findfs. - This also enables label or uuid support for swapon. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS - bool "Support mounting NFS file systems" - default n - depends on BUSYBOX_CONFIG_MOUNT - select BUSYBOX_CONFIG_FEATURE_HAVE_RPC - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - Enable mounting of NFS file systems. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS - bool "Support mounting CIFS/SMB file systems" - default y - depends on BUSYBOX_CONFIG_MOUNT - help - Enable support for samba mounts. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS - depends on BUSYBOX_CONFIG_MOUNT - bool "Support lots of -o flags in mount" - default y - help - Without this, mount only supports ro/rw/remount. With this, it - supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime, - noatime, diratime, nodiratime, loud, bind, move, shared, slave, - private, unbindable, rshared, rslave, rprivate, and runbindable. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB - depends on BUSYBOX_CONFIG_MOUNT - bool "Support /etc/fstab and -a" - default y - help - Support mount all and looking for files in /etc/fstab. - -config BUSYBOX_CONFIG_PIVOT_ROOT - bool "pivot_root" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The pivot_root utility swaps the mount points for the root filesystem - with some other mounted filesystem. This allows you to do all sorts - of wild and crazy things with your Linux system and is far more - powerful than 'chroot'. - - Note: This is for initrd in linux 2.4. Under initramfs (introduced - in linux 2.6) use switch_root instead. - -config BUSYBOX_CONFIG_RDATE - bool "rdate" - default n - help - The rdate utility allows you to synchronize the date and time of your - system clock with the date and time of a remote networked system using - the RFC868 protocol, which is built into the inetd daemon on most - systems. - -config BUSYBOX_CONFIG_RDEV - bool "rdev" - default n - help - Print the device node associated with the filesystem mounted at '/'. - -config BUSYBOX_CONFIG_READPROFILE - bool "readprofile" - default n - #select PLATFORM_LINUX - help - This allows you to parse /proc/profile for basic profiling. - -config BUSYBOX_CONFIG_RTCWAKE - bool "rtcwake" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Enter a system sleep state until specified wakeup time. - -config BUSYBOX_CONFIG_SCRIPT - bool "script" - default n - help - The script makes typescript of terminal session. - -config BUSYBOX_CONFIG_SCRIPTREPLAY - bool "scriptreplay" - default n - help - This program replays a typescript, using timing information - given by script -t. - -config BUSYBOX_CONFIG_SETARCH - bool "setarch" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The linux32 utility is used to create a 32bit environment for the - specified program (usually a shell). It only makes sense to have - this util on a system that supports both 64bit and 32bit userland - (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). - -config BUSYBOX_CONFIG_SWAPONOFF - bool "swaponoff" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - This option enables both the 'swapon' and the 'swapoff' utilities. - Once you have created some swap space using 'mkswap', you also need - to enable your swap space with the 'swapon' utility. The 'swapoff' - utility is used, typically at system shutdown, to disable any swap - space. If you are not using any swap space, you can leave this - option disabled. - -config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI - bool "Support priority option -p" - default n - depends on BUSYBOX_CONFIG_SWAPONOFF - help - Enable support for setting swap device priority in swapon. - -config BUSYBOX_CONFIG_SWITCH_ROOT - bool "switch_root" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The switch_root utility is used from initramfs to select a new - root device. Under initramfs, you have to use this instead of - pivot_root. (Stop reading here if you don't care why.) - - Booting with initramfs extracts a gzipped cpio archive into rootfs - (which is a variant of ramfs/tmpfs). Because rootfs can't be moved - or unmounted*, pivot_root will not work from initramfs. Instead, - switch_root deletes everything out of rootfs (including itself), - does a mount --move that overmounts rootfs with the new root, and - then execs the specified init program. - - * Because the Linux kernel uses rootfs internally as the starting - and ending point for searching through the kernel's doubly linked - list of active mount points. That's why. - -config BUSYBOX_CONFIG_UMOUNT - bool "umount" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - When you want to remove a mounted filesystem from its current mount - point, for example when you are shutting down the system, the - 'umount' utility is the tool to use. If you enabled the 'mount' - utility, you almost certainly also want to enable 'umount'. - -config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL - bool "Support option -a" - default y - depends on BUSYBOX_CONFIG_UMOUNT - help - Support -a option to unmount all currently mounted filesystems. - -comment "Common options for mount/umount" - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - -config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP - bool "Support loopback mounts" - default y - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - help - Enabling this feature allows automatic mounting of files (containing - filesystem images) via the linux kernel's loopback devices. - The mount command will detect you are trying to mount a file instead - of a block device, and transparently associate the file with a - loopback device. The umount command will also free that loopback - device. - - You can still use the 'losetup' utility (to manually associate files - with loop devices) if you need to do something advanced, such as - specify an offset or cryptographic options to the loopback device. - (If you don't want umount to free the loop device, use "umount -D".) - -config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE - bool "Create new loopback devices if needed" - default n - depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP - help - Linux kernels >= 2.6.24 support unlimited loopback devices. They are - allocated for use when trying to use a loop device. The loop device - must however exist. - - This feature lets mount to try to create next /dev/loopN device - if it does not find a free one. - -config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT - bool "Support for the old /etc/mtab file" - default n - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE - help - Historically, Unix systems kept track of the currently mounted - partitions in the file "/etc/mtab". These days, the kernel exports - the list of currently mounted partitions in "/proc/mounts", rendering - the old mtab file obsolete. (In modern systems, /etc/mtab should be - a symlink to /proc/mounts.) - - The only reason to have mount maintain an /etc/mtab file itself is if - your stripped-down embedded system does not have a /proc directory. - If you must use this, keep in mind it's inherently brittle (for - example a mount under chroot won't update it), can't handle modern - features like separate per-process filesystem namespaces, requires - that your /etc directory be writable, tends to get easily confused - by --bind or --move mounts, won't update if you rename a directory - that contains a mount point, and so on. (In brief: avoid.) - - About the only reason to use this is if you've removed /proc from - your kernel. - -config BUSYBOX_CONFIG_VOLUMEID - bool #No description makes it a hidden option - default n - -menu "Filesystem/Volume identification" - depends on BUSYBOX_CONFIG_VOLUMEID - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT - bool "Ext filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS - bool "btrfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS - bool "Reiser filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT - bool "fat filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS - bool "hfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS - bool "jfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_UFS -### bool "ufs filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS - bool "xfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS - bool "ntfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660 - bool "iso9660 filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF - bool "udf filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS - bool "luks filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP - bool "linux swap filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_LVM -### bool "lvm" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS - bool "cramfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HPFS -### bool "hpfs filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS - bool "romfs filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV - bool "sysv filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_MINIX -### bool "minix filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -### These only detect partition tables - not used (yet?) -### config FEATURE_VOLUMEID_MAC -### bool "mac filesystem" -### default y -### depends on VOLUMEID -### help -### TODO -### -### config FEATURE_VOLUMEID_MSDOS -### bool "msdos filesystem" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2 - bool "ocfs2 filesystem" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HIGHPOINTRAID -### bool "highpoint raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_ISWRAID -### bool "intel raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_LSIRAID -### bool "lsi raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_VIARAID -### bool "via raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_SILICONRAID -### bool "silicon raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_NVIDIARAID -### bool "nvidia raid" -### default y -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_PROMISERAID -### bool "promise raid" -### default y -### depends on VOLUMEID -### help -### TODO - -config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID - bool "linuxraid" - default n - depends on BUSYBOX_CONFIG_VOLUMEID - help - TODO - -endmenu - -endmenu diff --git a/package/utils/busybox/convert_menuconfig.pl b/package/utils/busybox/convert_menuconfig.pl deleted file mode 100755 index 0128bf78d7..0000000000 --- a/package/utils/busybox/convert_menuconfig.pl +++ /dev/null @@ -1,78 +0,0 @@ -#!/usr/bin/perl -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -use strict; -my $PATH = $ARGV[0]; -($PATH and -d $PATH) or die 'invalid path'; -my $DEFCONFIG = $ARGV[1]; -($DEFCONFIG and -f $DEFCONFIG) or die 'invalid config file'; - -my %config; - -open CONFIG, $DEFCONFIG or die 'cannot open config file'; -while () { - /^CONFIG_([\w_]+)=([ym])/ and $config{$1} = $2; - /^CONFIG_([\w_]+)=(\d+)/ and $config{$1} = $2; - /^CONFIG_([\w_]+)=(".+")/ and $config{$1} = $2; -} -close CONFIG; - -open FIND, "find \"$PATH\" -name Config.in |"; -while () { - chomp; - my $input = $_; - s/^$PATH\///g; - s/sysdeps\/linux\///g; - my $output = $_; - print STDERR "$input => $output\n"; - $output =~ /^(.+)\/[^\/]+$/ and system("mkdir -p $1"); - - open INPUT, $input; - open OUTPUT, ">$output"; - my ($cur, $default_set, $line); - while ($line = ) { - next if $line =~ /^\s*mainmenu/; - - # FIXME: make this dynamic - $line =~ s/default FEATURE_BUFFERS_USE_MALLOC/default FEATURE_BUFFERS_GO_ON_STACK/; - $line =~ s/default FEATURE_SH_IS_NONE/default FEATURE_SH_IS_ASH/; - - if ($line =~ /^\s*config\s*([\w_]+)/) { - $cur = $1; - undef $default_set; - } - if ($line =~ /^\s*(menu|choice|end|source)/) { - undef $cur; - undef $default_set; - } - $line =~ s/^(\s*source\s+)/$1package\/busybox\/config\//; - - $line =~ s/^(\s*(prompt "[^"]+" if|config|depends|depends on|select|default|default \w if)\s+\!?)([A-Z_])/$1BUSYBOX_CONFIG_$3/g; - $line =~ s/(( \|\| | \&\& | \( )!?)([A-Z_])/$1BUSYBOX_CONFIG_$3/g; - $line =~ s/(\( ?!?)([A-Z_]+ (\|\||&&))/$1BUSYBOX_CONFIG_$2/g; - - if ($cur) { - ($cur eq 'LFS') and do { - $line =~ s/^(\s*(bool|tristate|string))\s*".+"$/$1/; - }; - if ($line =~ /^\s*default/) { - my $c; - $default_set = 1; - $c = $config{$cur} or $c = 'n'; - - $line =~ s/^(\s*default\s*)(\w+|"[^"]*")(.*)/$1$c$3/; - } - } - - print OUTPUT $line; - } - close OUTPUT; - close INPUT; - -} -close FIND; -- 2.30.2