From 550642098095652b7454199cc98986c01057da8e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 22 Dec 2014 14:37:07 +0000 Subject: [PATCH] kernel: remove openwrt micrel.c (replaced by upstream driver) Signed-off-by: Felix Fietkau SVN-Revision: 43762 --- .../generic/files/drivers/net/phy/micrel.c | 83 ------------------- .../generic/patches-3.14/728-phy-micrel.patch | 24 ------ ...-rtl8367b.patch => 728-phy-rtl8367b.patch} | 4 +- .../generic/patches-3.14/729-phy-tantos.patch | 6 +- .../generic/patches-3.14/730-phy_b53.patch | 6 +- .../generic/patches-3.18/728-phy-micrel.patch | 24 ------ ...-rtl8367b.patch => 728-phy-rtl8367b.patch} | 4 +- .../generic/patches-3.18/729-phy-tantos.patch | 6 +- .../generic/patches-3.18/730-phy_b53.patch | 6 +- 9 files changed, 16 insertions(+), 147 deletions(-) delete mode 100644 target/linux/generic/files/drivers/net/phy/micrel.c delete mode 100644 target/linux/generic/patches-3.14/728-phy-micrel.patch rename target/linux/generic/patches-3.14/{729-phy-rtl8367b.patch => 728-phy-rtl8367b.patch} (88%) delete mode 100644 target/linux/generic/patches-3.18/728-phy-micrel.patch rename target/linux/generic/patches-3.18/{729-phy-rtl8367b.patch => 728-phy-rtl8367b.patch} (88%) diff --git a/target/linux/generic/files/drivers/net/phy/micrel.c b/target/linux/generic/files/drivers/net/phy/micrel.c deleted file mode 100644 index 1499d4ace4..0000000000 --- a/target/linux/generic/files/drivers/net/phy/micrel.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Driver for Micrel/Kendin PHYs - * - * Copyright (c) 2008-2009 Gabor Juhos - * Copyright (C) 2008 Imre Kaloz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include - -#define KSZ_REG_INT_CTRL 0x1b - -#define KSZ_INT_LU_EN (1 << 8) /* enable Link Up interrupt */ -#define KSZ_INT_RF_EN (1 << 9) /* enable Remote Fault interrupt */ -#define KSZ_INT_LD_EN (1 << 10) /* enable Link Down interrupt */ - -#define KSZ_INT_INIT (KSZ_INT_LU_EN | KSZ_INT_LD_EN) - -static int ksz8041_ack_interrupt(struct phy_device *phydev) -{ - int err; - - err = phy_read(phydev, KSZ_REG_INT_CTRL); - - return (err < 0) ? err : 0; -} - -static int ksz8041_config_intr(struct phy_device *phydev) -{ - int err; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - err = phy_write(phydev, KSZ_REG_INT_CTRL, - KSZ_INT_INIT); - else - err = phy_write(phydev, KSZ_REG_INT_CTRL, 0); - - return err; -} - -static struct phy_driver ksz8041_phy_driver = { - .phy_id = 0x00221512, - .name = "Micrel KSZ8041", - .phy_id_mask = 0x001fffff, - .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .ack_interrupt = ksz8041_ack_interrupt, - .config_intr = ksz8041_config_intr, - .driver = { - .owner = THIS_MODULE, - }, -}; - -static int __init micrel_phy_init(void) -{ - return phy_driver_register(&ksz8041_phy_driver); -} - -static void __exit micrel_phy_exit(void) -{ - phy_driver_unregister(&ksz8041_phy_driver); -} - -#ifdef MODULE -module_init(micrel_phy_init); -module_exit(micrel_phy_exit); -#else -subsys_initcall(micrel_phy_init); -#endif - -MODULE_DESCRIPTION("Micrel/Kendin PHY driver"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_AUTHOR("Imre Kaloz "); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/patches-3.14/728-phy-micrel.patch b/target/linux/generic/patches-3.14/728-phy-micrel.patch deleted file mode 100644 index baf5a4a7fd..0000000000 --- a/target/linux/generic/patches-3.14/728-phy-micrel.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -144,6 +144,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/patches-3.14/729-phy-rtl8367b.patch b/target/linux/generic/patches-3.14/728-phy-rtl8367b.patch similarity index 88% rename from target/linux/generic/patches-3.14/729-phy-rtl8367b.patch rename to target/linux/generic/patches-3.14/728-phy-rtl8367b.patch index d69fc89e47..36a82311fe 100644 --- a/target/linux/generic/patches-3.14/729-phy-rtl8367b.patch +++ b/target/linux/generic/patches-3.14/728-phy-rtl8367b.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -262,6 +262,10 @@ config RTL8367_PHY +@@ -257,6 +257,10 @@ config RTL8367_PHY tristate "Driver for the Realtek RTL8367R/M switches" select SWCONFIG @@ -19,5 +19,5 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o +obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.14/729-phy-tantos.patch b/target/linux/generic/patches-3.14/729-phy-tantos.patch index 4a9fe873a7..935193a58e 100644 --- a/target/linux/generic/patches-3.14/729-phy-tantos.patch +++ b/target/linux/generic/patches-3.14/729-phy-tantos.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -273,3 +273,8 @@ endif # PHYLIB +@@ -268,3 +268,8 @@ endif # PHYLIB config MICREL_KS8995MA tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" depends on SPI @@ -11,10 +11,10 @@ + select ETHERNET_PACKET_MANGLE --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o +@@ -29,6 +29,7 @@ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb + obj-$(CONFIG_RTL8367_PHY) += rtl8367.o obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o +obj-$(CONFIG_PSB6970_PHY) += psb6970.o obj-$(CONFIG_FIXED_PHY) += fixed.o obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.14/730-phy_b53.patch b/target/linux/generic/patches-3.14/730-phy_b53.patch index cd58182f7e..27b8197e15 100644 --- a/target/linux/generic/patches-3.14/730-phy_b53.patch +++ b/target/linux/generic/patches-3.14/730-phy_b53.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -268,6 +268,8 @@ config RTL8367B_PHY +@@ -263,6 +263,8 @@ config RTL8367B_PHY endif # RTL8366_SMI @@ -11,9 +11,9 @@ config MICREL_KS8995MA --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o +@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o + obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_PSB6970_PHY) += psb6970.o +obj-$(CONFIG_B53) += b53/ obj-$(CONFIG_FIXED_PHY) += fixed.o diff --git a/target/linux/generic/patches-3.18/728-phy-micrel.patch b/target/linux/generic/patches-3.18/728-phy-micrel.patch deleted file mode 100644 index 95199a4348..0000000000 --- a/target/linux/generic/patches-3.18/728-phy-micrel.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -156,6 +156,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_RTL8367_PHY) += rtl8367.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/generic/patches-3.18/729-phy-rtl8367b.patch b/target/linux/generic/patches-3.18/728-phy-rtl8367b.patch similarity index 88% rename from target/linux/generic/patches-3.18/729-phy-rtl8367b.patch rename to target/linux/generic/patches-3.18/728-phy-rtl8367b.patch index cc4f7940d2..958ff58907 100644 --- a/target/linux/generic/patches-3.18/729-phy-rtl8367b.patch +++ b/target/linux/generic/patches-3.18/728-phy-rtl8367b.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -281,6 +281,10 @@ config RTL8367_PHY +@@ -276,6 +276,10 @@ config RTL8367_PHY tristate "Driver for the Realtek RTL8367R/M switches" select SWCONFIG @@ -19,5 +19,5 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o +obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.18/729-phy-tantos.patch b/target/linux/generic/patches-3.18/729-phy-tantos.patch index 6262ef9803..019f919492 100644 --- a/target/linux/generic/patches-3.18/729-phy-tantos.patch +++ b/target/linux/generic/patches-3.18/729-phy-tantos.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -292,3 +292,8 @@ endif # PHYLIB +@@ -287,3 +287,8 @@ endif # PHYLIB config MICREL_KS8995MA tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" depends on SPI @@ -11,10 +11,10 @@ + select ETHERNET_PACKET_MANGLE --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o +@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb + obj-$(CONFIG_RTL8367_PHY) += rtl8367.o obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o +obj-$(CONFIG_PSB6970_PHY) += psb6970.o obj-$(CONFIG_FIXED_PHY) += fixed.o obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic/patches-3.18/730-phy_b53.patch b/target/linux/generic/patches-3.18/730-phy_b53.patch index 5e13797630..c2dfcfa501 100644 --- a/target/linux/generic/patches-3.18/730-phy_b53.patch +++ b/target/linux/generic/patches-3.18/730-phy_b53.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -287,6 +287,8 @@ config RTL8367B_PHY +@@ -282,6 +282,8 @@ config RTL8367B_PHY endif # RTL8366_SMI @@ -11,9 +11,9 @@ config MICREL_KS8995MA --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o +@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o + obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o - obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_PSB6970_PHY) += psb6970.o +obj-$(CONFIG_B53) += b53/ obj-$(CONFIG_FIXED_PHY) += fixed.o -- 2.30.2