From 61b49cd3f8587acddb12582fe7fc91a8f519cf4d Mon Sep 17 00:00:00 2001 From: Russell Senior Date: Thu, 12 Aug 2021 22:57:41 -0700 Subject: [PATCH] ath79: add support for Ubiquiti PowerBeam M2 (XW) This patch adds support for the Ubiquiti PowerBeam M2 (XW), e.g. PBE-M2-400, a 802.11n wireless with a feed+dish form factor. This device was previously supported by the ar71xx loco-m-xw firmware. Specifications: - Atheros AR9342 SoC - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see https://openwrt.org/toh/ubiquiti/powerbeam installation instructions) - Upload the factory image via AirOS web GUI. Flashing via TFTP: - Use a pointy tool (e.g., unbent paperclip) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-ubnt_powerbeam-m2-xw-squashfs-factory.bin WARNING: so far, no non-destructive method has been discovered for opening the enclosure to reach the serial console. Internal photos are available here: https://fcc.io/SWX-NBM2HP Signed-off-by: Russell Senior --- .../ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts | 34 +++++++++++++++++++ .../generic/base-files/etc/board.d/01_leds | 1 + .../generic/base-files/etc/board.d/02_network | 1 + target/linux/ath79/image/generic-ubnt.mk | 8 +++++ 4 files changed, 44 insertions(+) create mode 100644 target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts new file mode 100644 index 0000000000..046715b00a --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_ubnt_xw.dtsi" + +/ { + compatible = "ubnt,powerbeam-m2-xw", "ubnt,xw", "qca,ar9342"; + model = "Ubiquiti PowerBeam M2 (XW)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x02000000 0x00000101 0x00001313>; + + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 5707bbac4e..8715a57213 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -406,6 +406,7 @@ ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ +ubnt,powerbeam-m2-xw|\ ubnt,powerbeam-m5-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-m) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 780068790c..fba6d56674 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -86,6 +86,7 @@ ath79_setup_interfaces() ubnt,picostation-m|\ ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ + ubnt,powerbeam-m2-xw|\ ubnt,powerbeam-m5-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-5ac-lite|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 547af632f6..3888e1652b 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2 endef TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 +define Device/ubnt_powerbeam-m2-xw + $(Device/ubnt-xw) + DEVICE_MODEL := PowerBeam M2 + DEVICE_PACKAGES += rssileds + SUPPORTED_DEVICES += loco-m-xw +endef +TARGET_DEVICES += ubnt_powerbeam-m2-xw + define Device/ubnt_powerbeam-m5-xw $(Device/ubnt-xw) DEVICE_MODEL := PowerBeam M5 -- 2.30.2