From 987562bad2d8d48297829070bfdbaf0a0a423a27 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Sun, 11 Apr 2021 16:59:09 +0100 Subject: [PATCH] uboot-mediatek: add spi-nand build for bananapi bpi-r64 Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle Signed-off-by: Oskari Lemmela --- package/boot/uboot-mediatek/Makefile | 12 + .../403-add-bananapi_bpi-r64-snand.patch | 33 +++ ...404-add-bananapi_bpi-r64_defconfigs.patch} | 278 ++++++++++++++++-- 3 files changed, 302 insertions(+), 21 deletions(-) create mode 100644 package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64-snand.patch rename package/boot/uboot-mediatek/patches/{403-add-bananapi_bpi-r64_defconfigs.patch => 404-add-bananapi_bpi-r64_defconfigs.patch} (57%) diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 269c9e5db5..673b4d2aed 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -54,6 +54,17 @@ define U-Boot/mt7622_bananapi_bpi-r64-sdmmc DEPENDS:=+trusted-firmware-a-mt7622-sdmmc-2ddr endef +define U-Boot/mt7622_bananapi_bpi-r64-snand + NAME:=BananaPi R64 (SNAND) + UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-snand + BUILD_DEVICES:=bananapi_bpi-r64 + BUILD_SUBTARGET:=mt7622 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=snand + BL2_DDRBLOB:=2 + DEPENDS:=+trusted-firmware-a-mt7622-snand-2ddr +endef + define U-Boot/mt7622_ubnt_unifi-6-lr NAME:=Ubiquiti UniFi 6 LR UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr @@ -90,6 +101,7 @@ endef UBOOT_TARGETS := \ mt7622_bananapi_bpi-r64-emmc \ mt7622_bananapi_bpi-r64-sdmmc \ + mt7622_bananapi_bpi-r64-snand \ mt7622_linksys_e8450 \ mt7622_rfb1 \ mt7622_ubnt_unifi-6-lr \ diff --git a/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64-snand.patch b/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64-snand.patch new file mode 100644 index 0000000000..1dc2a84893 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64-snand.patch @@ -0,0 +1,33 @@ +--- a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts ++++ b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts +@@ -19,7 +19,7 @@ + }; + + aliases { +- spi0 = &snfi; ++ spi0 = &snand; + ethernet0 = ð + }; + +@@ -205,17 +205,11 @@ + }; + }; + +-&snfi { +- pinctrl-names = "default", "snfi"; +- pinctrl-0 = <&snor_pins>; +- pinctrl-1 = <&snfi_pins>; ++&snand { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&snfi_pins>; + status = "okay"; +- +- spi-flash@0{ +- compatible = "jedec,spi-nor"; +- reg = <0>; +- u-boot,dm-pre-reloc; +- }; ++ quad-spi; + }; + + &uart0 { diff --git a/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch similarity index 57% rename from package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch rename to package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch index 94018cf9eb..cfe5ab7b01 100644 --- a/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch +++ b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/configs/mt7622_bananapi_bpi-r64-sdmmc_defconfig -@@ -0,0 +1,144 @@ +@@ -0,0 +1,157 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y @@ -34,7 +34,7 @@ +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y -+CONFIG_DEFAULT_FDT_FILE="mt7622-bananapi-bpi-r64" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7622-bananapi-bpi-r64.dtb" +CONFIG_SYS_PROMPT="MT7622> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y @@ -42,6 +42,7 @@ +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y @@ -59,6 +60,7 @@ +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y @@ -67,6 +69,9 @@ +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +# CONFIG_CMD_PSTORE is not set @@ -80,6 +85,7 @@ +CONFIG_CMD_UUID=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y @@ -115,6 +121,9 @@ +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:512k(bl2),2048k(fip),-(ubi)" +CONFIG_DM_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PINCTRL=y @@ -133,6 +142,10 @@ +CONFIG_MMC_MTK=y +CONFIG_MMC_SUPPORTS_TUNING=y +CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y @@ -147,20 +160,20 @@ +CONFIG_USB_STORAGE=y --- /dev/null +++ b/bananapi_bpi-r64-sdmmc_env -@@ -0,0 +1,60 @@ +@@ -0,0 +1,81 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x4007ff28 -+bootcmd=run boot_sdmmc +bootargs=root=/dev/mmcblk1p65 ++bootcmd=run boot_sdmmc +bootconf=config-mt7622-bananapi-bpi-r64-pcie1 +bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1 +bootconf_sata=config-mt7622-bananapi-bpi-r64-sata +bootdelay=0 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb +bootfile_upg=openwrt-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb -+bootfile_emmcbl3=openwrt-mediatek-mt7622-bananapi_bpi-r64-boot-emmc.img -+bootfile_emmcbl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-bl2-emmc.bin ++bootfile_emmcbl3=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-bl31-uboot.fip ++bootfile_emmcbl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-preloader.bin +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 @@ -172,9 +185,10 @@ +bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; run boot_tftp_production ; setenv noboot ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; run boot_tftp_recovery ; setenv noboot ; run bootmenu_confirm_return -+bootmenu_6=Install bootloader and recovery to eMMC.=run emmc_init ; run bootmenu_confirm_return -+bootmenu_7=Reboot.=reset -+bootmenu_8=Reset all settings to factory defaults.=run reset_factory ; reset ++bootmenu_6=Install bootloader, recovery and production to eMMC.=run emmc_init ; run bootmenu_confirm_return ++bootmenu_7=Install bootloader, recovery and production to NAND.=run ubi_init ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_default=run bootcmd ; run boot_recovery ; run boot_tftp_forever +boot_first=if button reset ; then run boot_tftp_forever ; fi ; bootmenu +boot_production=led bpi-r64:pio:green on ; run sdmmc_read_production && bootm $loadaddr#$bootconf @@ -184,26 +198,46 @@ +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=tftpboot $loadaddr $bootfile && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr ++boot_ubi=ubi part ubi && setenv bootargs && run boot_ubi_production ; run check_recovery ++boot_ubi_production=led bpi-r64:pio:green on ; run ubi_read_production && bootm $loadaddr ++boot_ubi_recovery=led bpi-r64:pio:green off ; run check_recovery ++check_recovery=run ubi_read_recovery ; if iminfo $loadaddr ; then bootm $loadaddr ; else ubi remove recovery ; fi ++check_ubi=ubi part ubi || run ubi_format ++emmc_init=run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv ++emmc_init_bl=run sdmmc_read_emmc_bl2 && run emmc_write_bl2 && run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_emmc_bl3 && run emmc_write_bl3 ++emmc_init_openwrt=run sdmmc_read_recovery && run emmc_write_recovery ; run sdmmc_read_production && run emmc_write_production +emmc_write_bl2=mmc dev 0 1 && mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $loadaddr 0x0 0x100 ; mmc partconf 0 1 1 0 -+emmc_write_hdr=mmc dev 0 0 && mmc erase 0x0 0x40 && mmc write $loadaddr 0x0 0x40 +emmc_write_bl3=mmc dev 0 0 && mmc erase 0x1000 0x1000 && mmc write $loadaddr 0x1000 0x1000 && mmc erase 0x2000 0x800 ++emmc_write_hdr=mmc dev 0 0 && mmc erase 0x0 0x40 && mmc write $loadaddr 0x0 0x40 +emmc_write_production=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol -+emmc_init_bl=run sdmmc_read_emmc_bl2 && run emmc_write_bl2 && run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_emmc_bl3 && run emmc_write_bl3 -+emmc_init_openwrt=run sdmmc_read_recovery && run emmc_write_recovery ; run sdmmc_read_production && run emmc_write_production -+emmc_init=run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv -+sdmmc_write_production=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_write_vol -+sdmmc_write_recovery=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_write_vol -+sdmmc_read_production=mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_read_vol -+sdmmc_read_recovery=mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_read_vol -+sdmmc_read_emmc_hdr=mmc dev 1 && part start mmc 1 install part_addr && mmc read $loadaddr $part_addr 0x40 -+sdmmc_read_emmc_bl2=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x400 && mmc read $loadaddr $offset 0x400 -+sdmmc_read_emmc_bl3=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x1000 && mmc read $loadaddr $offset 0x1000 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size -+mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size ++mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 +part_default=production +part_recovery=recovery +reset_factory=eraseenv && reset ++sdmmc_read_emmc_hdr=mmc dev 1 && part start mmc 1 install part_addr && mmc read $loadaddr $part_addr 0x40 ++sdmmc_read_emmc_bl2=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x400 && mmc read $loadaddr $offset 0x400 ++sdmmc_read_emmc_bl3=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x1000 && mmc read $loadaddr $offset 0x1000 ++sdmmc_read_production=mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_read_vol ++sdmmc_read_recovery=mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_read_vol ++sdmmc_read_snand_bl2=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x2000 && mmc read $loadaddr $offset 0x400 ++sdmmc_read_snand_fip=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x2400 && mmc read $loadaddr $offset 0x1000 ++sdmmc_write_production=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_write_vol ++sdmmc_write_recovery=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_write_vol ++snand_write_fip=mtd erase fip && mtd write fip $loadaddr ++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1 ; ubi create fit 0x100000 dynamic 2 ; ubi create recovery 0x100000 dynamic 3 ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_init=run ubi_init_bl && ubi detach && mtd erase ubi && ubi part ubi && run ubi_create_env && run ubi_init_openwrt ++ubi_init_openwrt=run sdmmc_read_recovery && run ubi_write_recovery ; run sdmmc_read_production && run ubi_write_production ++ubi_init_bl=run sdmmc_read_snand_bl2 && run snand_write_bl2 && run sdmmc_read_snand_fip && run snand_write_fip ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; led bpi-r64:pio:blue on ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title @@ -404,3 +438,205 @@ +_firstboot=setenv _firstboot ; led bpi-r64:pio:blue on ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/configs/mt7622_bananapi_bpi-r64-snand_defconfig +@@ -0,0 +1,138 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_SYS_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BOOTP_SEND_HOSTNAME=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=25000000 ++CONFIG_DEFAULT_DEVICE_TREE="mt7622-bananapi-bpi-r64" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART=y ++CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r64-snand_env" ++CONFIG_DISTRO_DEFAULTS=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7622-bananapi-bpi-r64.dtb" ++CONFIG_SYS_PROMPT="MT7622> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_EFIDEBUG=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++# CONFIG_CMD_PSTORE is not set ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MMC=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-nand0:512k(bl2),2048k(fip),-(ubi)" ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_MMC=y ++CONFIG_MMC_DEFAULT_DEV=1 ++CONFIG_MMC_MTK=y ++CONFIG_SUPPORT_EMMC_BOOT=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y +--- /dev/null ++++ b/bananapi_bpi-r64-snand_env +@@ -0,0 +1,58 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x4007ff28 ++bootargs=root=/dev/ubiblock0_2p1 ++bootcmd=run boot_ubi ++bootconf=config-mt7622-bananapi-bpi-r64-pcie1 ++bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1 ++bootconf_sata=config-mt7622-bananapi-bpi-r64-sata ++bootdelay=0 ++bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb ++bootfile_upg=openwrt-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb ++bootfile_fip=openwrt-mediatek-mt7622-bananapi_bpi-r64-snand-bl31-uboot.fip ++bootfile_bl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-snand-preloader.bin ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; run boot_tftp_production ; setenv noboot ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; run boot_tftp_recovery ; setenv noboot ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Get IP address from DHCP.=dhcp ; run bootmenu_confirm_return ++bootmenu_9=Reboot.=reset ++bootmenu_a=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_default=run bootcmd ; run boot_recovery ; run boot_tftp_forever ++boot_first=if button reset ; then run boot_tftp_forever ; fi ; bootmenu ++boot_production=led bpi-r64:pio:green on ; run ubi_read_production && bootm $loadaddr#$bootconf ++boot_recovery=led bpi-r64:pio:green off ; run check_recovery ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_forever=led bpi-r64:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run boot_write_bl2 ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip ++boot_ubi=ubi part ubi && run boot_production ; run boot_recovery ++boot_write_fip=mtd erase fip && mtd write fip $loadaddr ++boot_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++check_recovery=run ubi_read_recovery ; if iminfo $loadaddr ; then bootm $loadaddr#$bootconf; else ubi remove recovery ; fi ++check_ubi=ubi part ubi || run ubi_format ++part_default=production ++part_recovery=recovery ++reset_factory=ubi part ubi ; ubi write 0x0 ubootenv 0x0 ; ubi write 0x0 ubootenv2 0x0 ; ubi remove rootfs_data ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize ++_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1 ; ubi create fit 0x100000 dynamic 2 ; ubi create recovery 0x100000 dynamic 3 ++_init_env=setenv _init_env ; if ubi check ubootenv && ubi check ubootenv2 ; then else run _create_env ; fi ; setenv _create_env ; saveenv || run ubi_format ; saveenv || run ubi_format ++_firstboot=setenv _firstboot ; led bpi-r64:pio:blue on ; run _switch_to_menu ; run check_ubi ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d -- 2.30.2