From 9a038e7fd12eae3695875232962f96af8252f3ba Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Thu, 4 Nov 2021 21:52:43 +0100 Subject: [PATCH] generic: 5.15: copy config and patch from 5.10 Copy config and patches from kernel 5.10 to kernel 5.15 Signed-off-by: Ansuel Smith --- ...dcode-path-to-awk-in-scripts-ld-vers.patch | 30 + .../011-kbuild-export-SUBARCH.patch | 21 + ...station-poweroff-add-missing-put_dev.patch | 27 + ...-uasm-Enable-muhu-opcode-for-MIPS-R6.patch | 65 + ...rkaround-for-Loongson-2F-nop-CPU-err.patch | 31 + ...ips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch | 3078 +++++++ ...bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch | 1005 +++ ...f-Add-JIT-workarounds-for-CPU-errata.patch | 120 + ...0-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch | 61 + ...f-Remove-old-BPF-JIT-implementations.patch | 387 + ...a-neon-optimize-for-non-block-size-m.patch | 272 + ...a-neon-add-missing-counter-increment.patch | 38 + ...ut-frequently-used-members-above-cac.patch | 42 + ...to-define-reg_update_bits-for-no-bus.patch | 52 + ...CPU_MIPS64-for-remaining-MIPS64-CPUs.patch | 36 + ...boot-put-appended-dtb-into-a-section.patch | 36 + ...ow_offload-handle-netdevice-events-f.patch | 106 + ...convert-fixed-partitions-to-the-json.patch | 324 + ...move-partition-binding-to-its-own-fi.patch | 115 + ...d-add-binding-for-BCM4908-partitions.patch | 92 + ...art-support-BCM4908-fixed-partitions.patch | 654 ++ ...rt-limit-parsing-of-deprecated-DT-sy.patch | 69 + ...rt-make-symbol-bcm4908_partitions_qu.patch | 34 + ...em-cells-compatible-to-parse-mtd-as-.patch | 38 + ...ings-nvmem-drop-nodename-restriction.patch | 25 + ...Document-use-of-nvmem-cells-compatib.patch | 117 + ...add-binding-for-Linksys-Northstar-pa.patch | 98 + ...rt-support-Linksys-Northstar-partiti.patch | 156 + ...0002-Disable-buffered-writes-for-AMD.patch | 54 + ...ings-mtd-brcm-trx-Add-brcm-trx-magic.patch | 32 + ...Allow-to-specify-brcm-trx-magic-in-D.patch | 50 + ...Allow-to-use-TRX-parser-on-Mediatek-.patch | 25 + ...x-allow-to-use-on-MediaTek-MIPS-SoCs.patch | 33 + ...13-ubifs-default-to-zstd-compression.patch | 25 + ...pi-poll-functionality-to-__napi_poll.patch | 88 + ...threaded-able-napi-poll-loop-support.patch | 261 + ...tribute-to-control-napi-threaded-mod.patch | 177 + ...ween-napi-kthread-mode-and-busy-poll.patch | 93 + ...up-on-napi_disable-for-threaded-napi.patch | 53 + ...table-add-hash-offset-field-to-tuple.patch | 52 + ...ble-separate-replace-destroy-and-sta.patch | 98 + ...ack-Remove-unused-variable-declarati.patch | 22 + ...ble-consolidate-skb_try_make_writabl.patch | 291 + ...ble-move-skb_try_make_writable-befor.patch | 35 + ...ble-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch | 82 + ...wtable-fast-NAT-functions-never-fail.patch | 394 + ...ble-call-dst_check-to-fall-back-to-c.patch | 46 + ...ble-refresh-timeout-after-dst-and-wr.patch | 49 + ...es-update-table-flags-from-the-commi.patch | 103 + ...arding-path-from-virtual-netdevice-a.patch | 170 + ...lve-forwarding-path-for-vlan-devices.patch | 80 + ...ve-forwarding-path-for-bridge-device.patch | 62 + ...ve-forwarding-path-for-VLAN-tag-acti.patch | 207 + ...forwarding-path-for-bridge-pppoe-dev.patch | 113 + ...-forwarding-path-for-dsa-slave-ports.patch | 63 + ...filter-flowtable-add-xmit-path-types.patch | 147 + ...ble-use-dev_fill_forward_path-to-obt.patch | 191 + ...ble-use-dev_fill_forward_path-to-obt.patch | 374 + ...netfilter-flowtable-add-vlan-support.patch | 410 + ...ble-add-bridge-vlan-filtering-suppor.patch | 30 + ...etfilter-flowtable-add-pppoe-support.patch | 145 + ...-netfilter-flowtable-add-dsa-support.patch | 32 + ...ter-flowtable-bridge-and-vlan-suppor.patch | 107 + ...ble-add-offload-support-for-xmit-pat.patch | 310 + ...ow_offload-use-direct-xmit-if-hardwa.patch | 114 + ...ble-bridge-vlan-hardware-offload-and.patch | 123 + ...w_offload-add-FLOW_ACTION_PPPOE_PUSH.patch | 30 + ...ble-support-for-FLOW_ACTION_PPPOE_PU.patch | 35 + ...sa-slave-add-support-for-TC_SETUP_FT.patch | 53 + ...k_eth_soc-fix-parsing-packets-in-GDM.patch | 68 + ..._eth_soc-add-support-for-initializin.patch | 1308 +++ ..._eth_soc-add-flow-offloading-support.patch | 568 ++ ...e-update-documentation-with-enhancem.patch | 236 + ...rnet-mediatek-ppe-fix-busy-wait-loop.patch | 72 + ...iatek-fix-a-typo-bug-in-flow-offload.patch | 29 + ..._eth_soc-unmap-RX-data-before-callin.patch | 38 + ...et-mtk_eth_soc-fix-build_skb-cleanup.patch | 38 + ...net-mtk_eth_soc-use-napi_consume_skb.patch | 77 + ..._eth_soc-reduce-MDIO-bus-access-late.patch | 30 + ..._eth_soc-remove-unnecessary-TX-queue.patch | 54 + ..._eth_soc-use-larger-burst-size-for-Q.patch | 37 + ...-mtk_eth_soc-increase-DMA-ring-sizes.patch | 26 + ..._eth_soc-implement-dynamic-interrupt.patch | 313 + ..._eth_soc-cache-HW-pointer-of-last-fr.patch | 73 + ..._eth_soc-only-read-the-full-RX-descr.patch | 49 + ..._eth_soc-reduce-unnecessary-interrup.patch | 39 + ...et-mtk_eth_soc-rework-NAPI-callbacks.patch | 110 + ..._eth_soc-set-PPE-flow-hash-as-skb-ha.patch | 47 + ..._eth_soc-use-iopoll.h-macro-for-DMA-.patch | 71 + ...t-ethernet-mtk_eth_soc-missing-mutex.patch | 63 + ...t-mtk_eth_soc-handle-VLAN-pop-action.patch | 22 + ...ble-dst_check-from-garbage-collector.patch | 159 + ...ack-Introduce-tcp-offload-timeout-co.patch | 94 + ...ack-Introduce-udp-offload-timeout-co.patch | 92 + ...ble-Set-offload-timeouts-according-t.patch | 134 + ...thernet-mediatek-support-setting-MTU.patch | 138 + ...x-select-correct-page-on-config-init.patch | 108 + ...ix-probe-error-if-copper-page-is-sel.patch | 73 + ...10-v5.12-net-phy-Add-100-base-x-mode.patch | 56 + ...-sfp-add-support-for-100-base-x-SFPs.patch | 40 + ...phy-marvell-refactor-HWMON-OOP-style.patch | 549 ++ ...-marvell-add-SFP-support-for-88E1510.patch | 161 + ...cally-bring-up-DSA-master-when-openi.patch | 85 + ...y-switchdev-of-disappearance-of-old-.patch | 126 + ...r-when-a-non-legacy-FDB-operation-fa.patch | 52 + ...e-switchdev_notifier_fdb_info-in-dsa.patch | 226 + ...tchdev-event-implementation-under-th.patch | 85 + ...ly-in-dsa_slave_switchdev_event-if-w.patch | 42 + ...or-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch | 264 + ...setup-core-clock-even-in-TRGMII-mode.patch | 84 + ...-mt7530-MT7530-optional-GPIO-support.patch | 181 + ...-mt7530-Add-support-for-EEE-features.patch | 120 + ...the-dst-buffer-to-of_get_mac_address.patch | 1935 +++++ ..._addr_nvmem-for-non-platform-devices.patch | 77 + ...andle-deferred-probe-error-due-to-ma.patch | 42 + ...platform-handle-mac-address-deferral.patch | 36 + ...-0001-net-bgmac-improve-handling-PHY.patch | 84 + ...t-bgmac-support-MDIO-described-in-DT.patch | 54 + ...k-change-simple-print-to-dev-variant.patch | 35 + ...use-iopoll-macro-for-qca8k_busy_wait.patch | 61 + ...prove-qca8k-read-write-rmw-bus-acces.patch | 86 + ...a-qca8k-handle-qca8k_set_page-errors.patch | 101 + ...ndle-error-with-qca8k_read-operation.patch | 207 + ...ndle-error-with-qca8k_write-operatio.patch | 263 + ...andle-error-with-qca8k_rmw-operation.patch | 226 + ...8k-handle-error-from-qca8k_busy_wait.patch | 66 + ...qca8k-add-support-for-qca8327-switch.patch | 96 + ...sa-qca8k-Document-new-compatible-qca.patch | 26 + ...add-priority-tweak-to-qca8337-switch.patch | 130 + ...a-qca8k-limit-port5-delay-to-qca8337.patch | 31 + ...d-GLOBAL_FC-settings-needed-for-qca8.patch | 48 + ...dsa-qca8k-add-support-for-switch-rev.patch | 114 + ...d-ethernet-ports-fallback-to-setup_m.patch | 28 + ...-qca8k-make-rgmii-delay-configurable.patch | 188 + ...clear-MASTER_EN-after-phy-read-write.patch | 50 + ...a-qca8k-protect-MASTER-busy_wait-wit.patch | 128 + ...qca8k-enlarge-mdio-delay-and-timeout.patch | 39 + ...d-support-for-internal-phy-and-inter.patch | 267 + ...ngs-dsa-qca8k-Document-internal-mdio.patch | 93 + ...prove-internal-mdio-read-write-bus-a.patch | 95 + ...ss-switch_revision-info-to-phy-dev_f.patch | 48 + ...ort-for-qca8k-switch-internal-PHY-in.patch | 229 + ...issing-unlock-on-error-in-qca8k-vlan.patch | 64 + ...eck-return-value-of-read-functions-c.patch | 348 + ...d-missing-check-return-value-in-qca8.patch | 47 + ...x-an-endian-bug-in-qca8k-get-ethtool.patch | 47 + ...eck-the-correct-variable-in-qca8k-se.patch | 31 + ...ernel-panic-with-legacy-mdio-mapping.patch | 80 + ...-Add-debug-prints-in-b53_vlan_enable.patch | 65 + ...sa-b53-spi-allow-device-tree-probing.patch | 41 + ...3-net-dsa-b53-relax-is63xx-condition.patch | 31 + ...tag_brcm-add-support-for-legacy-tags.patch | 180 + ...0005-net-dsa-b53-support-legacy-tags.patch | 53 + ...dsa-b53-mmap-Add-device-tree-support.patch | 92 + ...-spi-add-missing-MODULE_DEVICE_TABLE.patch | 27 + ...Do-not-force-CPU-to-be-always-tagged.patch | 86 + ...3-remove-redundant-null-check-on-dev.patch | 30 + ...Create-default-VLAN-entry-explicitly.patch | 71 + ...dd-support-for-qca-8327-internal-phy.patch | 48 + ...3-Include-all-ports-in-enabled_ports.patch | 131 + ...-BCM5301x-workaround-for-a-wrong-CPU.patch | 42 + ...prove-flow-control-setup-on-BCM5301x.patch | 32 + ...t-dsa-b53-Drop-unused-cpu_port-field.patch | 205 + ...t-skb-offload_fwd_mark-when-not-offl.patch | 138 + ...x-add-support-for-qca-8327-A-variant.patch | 65 + ...dd-resume-suspend-function-to-qca83x.patch | 45 + ...ix-spacing-and-improve-name-for-83xx.patch | 95 + ...hy-at803x-fix-resume-for-QCA8327-phy.patch | 131 + ...x-add-DAC-amplitude-fix-for-8327-phy.patch | 91 + ...nable-prefer-master-for-83xx-interna.patch | 27 + ...hy-at803x-better-describe-debug-regs.patch | 127 + ...-dsa-qca8k-add-mac-power-sel-support.patch | 80 + ...dsa-qca8k-Add-SGMII-clock-phase-prop.patch | 30 + ...k-add-support-for-sgmii-falling-edge.patch | 127 + ...dsa-qca8k-Document-support-for-CPU-p.patch | 29 + ...dsa-qca8k-add-support-for-cpu-port-6.patch | 153 + ...work-rgmii-delay-logic-and-scan-for-.patch | 295 + ...dsa-qca8k-Document-qca-sgmii-enable-.patch | 33 + ...-qca8k-add-explicit-SGMII-PLL-enable.patch | 65 + ...dsa-qca8k-Document-qca-led-open-drai.patch | 37 + ...qca8k-add-support-for-pws-config-reg.patch | 92 + ...dsa-qca8k-document-support-for-qca83.patch | 32 + ...et-dsa-qca8k-add-support-for-QCA8328.patch | 78 + ...8k-set-internal-delay-also-for-sgmii.patch | 159 + ...move-port-config-to-dedicated-struct.patch | 124 + ...ipq8064-mdio-fix-warning-with-new-qc.patch | 26 + ...net-dsa-qca8k-convert-to-YAML-schema.patch | 631 ++ ...elay-applied-to-wrong-cpu-in-parse-p.patch | 28 + ...for-loop-in-setup-and-add-cpu-port-c.patch | 151 + ...sure-pad0-mac06-exchange-is-disabled.patch | 47 + ...ernal-delay-applied-to-the-wrong-PAD.patch | 48 + ...16-net-dsa-qca8k-fix-MTU-calculation.patch | 46 + ...redundant-check-in-parse_port_config.patch | 29 + ...vert-to-GENMASK_FIELD_PREP_FIELD_GET.patch | 508 ++ ...move-extra-mutex_init-in-qca8k_setup.patch | 25 + ...move-regmap-init-in-probe-and-set-it.patch | 46 + ...k-initial-conversion-to-regmap-heper.patch | 249 + ...ca8k-add-additional-MIB-counter-and-.patch | 120 + ...ca8k-add-support-for-port-fast-aging.patch | 53 + ...sa-qca8k-add-set_ageing_time-support.patch | 78 + ...sa-qca8k-add-support-for-mdb_add-del.patch | 142 + ...1-net-dsa-mt7530-support-setting-MTU.patch | 112 + ...-dsa-mt7530-enable-MTU-normalization.patch | 36 + ...a-mt7530-support-setting-ageing-time.patch | 99 + ...disable-learning-on-standalone-ports.patch | 65 + ...enable-assisted-learning-on-CPU-port.patch | 102 + ...se-independent-VLAN-learning-on-VLAN.patch | 262 + ...-mt7530-set-STP-state-on-filter-ID-1.patch | 40 + ...lways-install-FDB-entries-with-IVL-a.patch | 54 + ...et-dsa-mt7530-support-MDB-operations.patch | 171 + ...MediaTek-Gigabit-Ethernet-PHY-driver.patch | 159 + ...net-dsa-mt7530-add-interrupt-support.patch | 425 + ...N-filtering-syncing-out-of-dsa_switc.patch | 83 + ...cross-chip-syncing-of-VLAN-filtering.patch | 58 + ...5.15-1-igc-remove-_I_PHY_ID-checking.patch | 73 + ...v5.15-2-igc-remove-phy-type-checking.patch | 43 + ...ovide-missing-documentation-for-some.patch | 72 + ...x-a-couple-of-spelling-errors-in-fw_.patch | 34 + ...153_ecm-support-ECM-mode-for-RTL8153.patch | 320 + ...12-net-usb-r8152-use-new-tasklet-API.patch | 41 + ...veral-functions-about-phy-patch-requ.patch | 198 + ...t-the-flow-of-power-cut-for-RTL8153B.patch | 134 + ...152-enable-U1-U2-for-USB_SPEED_SUPER.patch | 47 + ...f-the-pointer-of-the-function-exists.patch | 51 + ...r8152-replace-netif_err-with-dev_err.patch | 36 + ...rtl_set_eee_plus-and-r8153b_green_en.patch | 89 + ...ter-fram-gap-time-depending-on-speed.patch | 75 + ...just-rtl8152_check_firmware-function.patch | 152 + ...8152-add-help-function-to-change-mtu.patch | 157 + .../793-v5.13-r8152-support-new-chips.patch | 2886 +++++++ ...port-PHY-firmware-for-RTL8156-series.patch | 691 ++ ...rch-the-configuration-of-vendor-mode.patch | 79 + ..._nvram-rename-finding-function-and-i.patch | 80 + ..._nvram-add-helper-checking-for-NVRAM.patch | 90 + ...7xx_nvram-extract-code-copying-NVRAM.patch | 80 + ..._nvram-look-for-NVRAM-with-for-inste.patch | 37 + ..._nvram-inline-code-checking-NVRAM-si.patch | 70 + ...rious-flag-to-disable-overcurrent-ch.patch | 88 + ...-platform-add-spurious_oc-DT-support.patch | 31 + ...-declare-its-reliance-on-msi-domains.patch | 34 + ...declar-their-reliance-on-msi-domains.patch | 44 + ...ertise-lack-of-built-in-msi-handling.patch | 59 + ...ialize-enable-GPIO-direction-to-outp.patch | 28 + ...mul-Add-description-for-class_revisi.patch | 44 + ...mul-Add-definitions-for-missing-capa.patch | 73 + ...-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch | 61 + ...PCI-aardvark-Clear-all-MSIs-at-setup.patch | 59 + ...ment-actions-in-driver-remove-method.patch | 34 + ...able-bus-mastering-when-unbinding-dr.patch | 41 + ...k-all-interrupts-when-unbinding-driv.patch | 48 + ...ark-Fix-memory-leak-in-driver-unbind.patch | 33 + ...k-Assert-PERST-when-unbinding-driver.patch | 33 + ...able-link-training-when-unbinding-dr.patch | 34 + ...able-common-PHY-when-unbinding-drive.patch | 30 + ...mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch | 67 + ...mvebu-a3700-comphy-Remove-unsupporte.patch | 40 + ...PS-ath79-drop-_machine_restart-again.patch | 49 + ...ext-hwmon-lm70-Add-ti-tmp125-support.patch | 71 + target/linux/generic/config-5.15 | 7179 +++++++++++++++++ .../generic/hack-5.15/204-module_strip.patch | 212 + .../generic/hack-5.15/205-kconfig-exit.patch | 11 + .../210-darwin_scripts_include.patch | 3053 +++++++ .../211-darwin-uuid-typedef-clash.patch | 22 + .../hack-5.15/212-tools_portability.patch | 110 + .../hack-5.15/214-spidev_h_portability.patch | 24 + .../hack-5.15/220-arm-gc_sections.patch | 123 + .../hack-5.15/221-module_exports.patch | 102 + .../hack-5.15/230-openwrt_lzma_options.patch | 34 + .../hack-5.15/249-udp-tunnel-selection.patch | 11 + .../hack-5.15/250-netfilter_depends.patch | 27 + .../linux/generic/hack-5.15/251-kconfig.patch | 199 + .../generic/hack-5.15/252-SATA_PMP.patch | 23 + .../generic/hack-5.15/253-ksmbd-config.patch | 22 + .../hack-5.15/259-regmap_dynamic.patch | 135 + .../260-crypto_test_dependencies.patch | 52 + .../hack-5.15/261-lib-arc4-unhide.patch | 15 + .../generic/hack-5.15/280-rfkill-stubs.patch | 84 + ...cache-use-more-efficient-cache-blast.patch | 64 + .../301-mips_image_cmdline_hack.patch | 38 + .../321-powerpc_crtsavres_prereq.patch | 38 + ...don-t-reply-on-mtdblock-device-minor.patch | 85 + ...rans-call-add-disks-after-mtd-device.patch | 98 + .../410-block-fit-partition-parser.patch | 224 + .../420-mtd-set-rootfs-to-be-root-dev.patch | 42 + ...ers-add-nvmem-support-to-cmdlinepart.patch | 120 + .../hack-5.15/430-mtk-bmt-support.patch | 23 + .../generic/hack-5.15/531-debloat_lzma.patch | 1040 +++ .../hack-5.15/600-bridge_offload.patch | 817 ++ ...lter-connmark-introduce-set-dscpmark.patch | 212 + ...-netfilter-add-xt_FLOWOFFLOAD-target.patch | 819 ++ .../hack-5.15/651-wireless_mesh_header.patch | 24 + .../hack-5.15/660-fq_codel_defaults.patch | 27 + .../700-swconfig_switch_drivers.patch | 129 + .../710-net-dsa-mv88e6xxx-default-VID-1.patch | 18 + ...-dsa-mv88e6xxx-disable-ATU-violation.patch | 12 + .../hack-5.15/720-net-phy-add-aqr-phys.patch | 142 + .../721-net-add-packet-mangeling.patch | 167 + ...hy-aquantia-enable-AQR112-and-AQR412.patch | 154 + ...aquantia-fix-system-side-protocol-mi.patch | 34 + ...y-aquantia-Add-AQR113-driver-support.patch | 43 + ...ntia-add-PHY_IDs-for-AQR112-variants.patch | 63 + ...-r8152-add-LED-configuration-from-OF.patch | 74 + ...et-add-RTL8152-binding-documentation.patch | 54 + .../hack-5.15/773-bgmac-add-srab-switch.patch | 98 + .../780-usb-net-MeigLink_modem_support.patch | 33 + .../800-GPIO-add-named-gpio-exports.patch | 162 + .../hack-5.15/901-debloat_sock_diag.patch | 162 + .../generic/hack-5.15/902-debloat_proc.patch | 408 + .../hack-5.15/904-debloat_dma_buf.patch | 92 + .../hack-5.15/910-kobject_uevent.patch | 32 + .../911-kobject_add_broadcast_uevent.patch | 76 + .../hack-5.15/920-device_tree_cmdline.patch | 12 + ...terrupt-provider-address-cells-check.patch | 28 + ...include-asm-rwonce.h-for-kernel-code.patch | 29 + ...-Use-stddefs.h-instead-of-compiler.h.patch | 11 + ...s-negative-stack-offsets-on-stack-tr.patch | 57 + ...e_mem_map-with-ARCH_PFN_OFFSET-calcu.patch | 82 + ...0-add-linux-spidev-compatible-si3210.patch | 18 + ...ame2-and-add-RENAME_WHITEOUT-support.patch | 78 + ...41-jffs2-add-RENAME_EXCHANGE-support.patch | 73 + .../142-jffs2-add-splice-ops.patch | 20 + ...ge_allow_receiption_on_disabled_port.patch | 45 + ...-rs5c372-support_alarms_up_to_1_week.patch | 94 + ...he_alarm_to_be_used_as_wakeup_source.patch | 70 + .../pending-5.15/201-extra_optimization.patch | 31 + .../203-kallsyms_uncompressed.patch | 119 + .../205-backtrace_module_info.patch | 41 + ...e-filenames-from-deps_initramfs-list.patch | 30 + ...able_wilink_platform_without_drivers.patch | 20 + .../270-platform-mikrotik-build-bits.patch | 31 + .../300-mips_expose_boot_raw.patch | 40 + .../302-mips_no_branch_likely.patch | 22 + .../pending-5.15/305-mips_module_reloc.patch | 371 + .../307-mips_highmem_offset.patch | 19 + .../pending-5.15/308-mips32r2_tune.patch | 22 + ...CPU-option-reporting-to-proc-cpuinfo.patch | 140 + .../310-arm_module_unresolved_weak_sym.patch | 22 + ...t-command-line-parameters-from-users.patch | 281 + .../332-arc-add-OWRTDTB-section.patch | 84 + ...able-unaligned-access-in-kernel-mode.patch | 24 + ...ernel-XZ-compression-option-on-PPC_8.patch | 25 + .../400-mtd-mtdsplit-support.patch | 313 + ...support-for-minor-aligned-partitions.patch | 389 + ...ers-ofpart-fix-parsing-subpartitions.patch | 76 + ...t-add-of_match_table-with-DT-binding.patch | 22 + .../pending-5.15/420-mtd-redboot_space.patch | 41 + ...30-mtd-add-myloader-partition-parser.patch | 229 + ...check-for-bad-blocks-when-calculatin.patch | 68 + ...bcm47xxpart-detect-T_Meter-partition.patch | 37 + ...mtd-add-routerbootpart-parser-config.patch | 38 + ...mtd-cfi_cmdset_0002-no-erase_suspend.patch | 25 + ...et_0002-add-buffer-write-cmd-timeout.patch | 17 + ...25p80-mx-disable-software-protection.patch | 18 + ...ort-limiting-4K-sectors-support-base.patch | 71 + .../476-mtd-spi-nor-add-eon-en25q128.patch | 18 + .../479-mtd-spi-nor-add-xtx-xt25f128b.patch | 79 + ...r-add-support-for-Gigadevice-GD25D05.patch | 22 + .../483-mtd-spi-nor-add-gd25q512.patch | 12 + ...spinand-add-support-for-xtx-xt26g0xa.patch | 178 + .../484-mtd-spi-nor-add-esmt-f25l16pa.patch | 11 + .../485-mtd-spi-nor-add-xmc-xm25qh128c.patch | 11 + ...mtd-device-named-ubi-or-data-on-boot.patch | 97 + ...to-create-ubiblock-device-for-rootfs.patch | 69 + ...ting-ubi0-rootfs-in-init-do_mounts.c.patch | 53 + ...ROOT_DEV-to-ubiblock-rootfs-if-unset.patch | 34 + .../494-mtd-ubi-add-EOF-marker-support.patch | 60 + ...-mtd-core-add-get_mtd_device_by_node.patch | 75 + ...-add-bindings-for-mtd-concat-devices.patch | 52 + ...cat-add-dt-driver-for-concat-devices.patch | 216 + ...i-nor-locking-support-for-MX25L6405D.patch | 34 + ...i-nor-disable-16-bit-sr-for-macronix.patch | 30 + .../500-fs_cdrom_dependencies.patch | 40 + .../530-jffs2_make_lzma_available.patch | 5180 ++++++++++++ .../pending-5.15/532-jffs2_eofdetect.patch | 65 + .../600-netfilter_conntrack_flush.patch | 88 + ...etfilter_match_bypass_default_checks.patch | 110 + ...netfilter_match_bypass_default_table.patch | 106 + ...netfilter_match_reduce_memory_access.patch | 22 + ...-netfilter_optional_tcp_window_check.patch | 73 + ...del-do-not-defer-queue-length-update.patch | 86 + .../pending-5.15/630-packet_socket_type.patch | 138 + .../pending-5.15/655-increase_skb_pad.patch | 20 + ...Add-support-for-MAP-E-FMRs-mesh-mode.patch | 511 ++ ...ng-with-source-address-failed-policy.patch | 263 + ...nes-for-_POLICY_FAILED-until-all-cod.patch | 50 + ...T-skip-GRO-for-foreign-MAC-addresses.patch | 149 + ...et-add-mac-address-increment-support.patch | 89 + ...83-of_net-add-mac-address-to-of-tree.patch | 38 + ..._eth_soc-avoid-creating-duplicate-of.patch | 26 + ...soc-add-ipv6-flow-offloading-support.patch | 65 + ...net-mtk_eth_soc-enable-threaded-NAPI.patch | 41 + ...detach-callback-to-struct-phy_driver.patch | 38 + ...d-knob-for-filtering-rx-tx-BPDU-pack.patch | 177 + ...net-phy-at803x-fix-feature-detection.patch | 66 + ...760-net-dsa-mv88e6xxx-fix-vlan-setup.patch | 27 + ...hdev-Refactor-br_switchdev_fdb_notif.patch | 77 + ...hdev-Include-local-flag-in-FDB-notif.patch | 42 + ...hdev-Send-FDB-notifications-for-host.patch | 96 + ...local-addresses-in-assisted-CPU-port.patch | 36 + ...bridge-addresses-in-assisted-CPU-por.patch | 30 + ...tic-FDB-entries-on-foreign-interface.patch | 56 + ...equest-assisted-learning-on-CPU-port.patch | 27 + ...-missing-linux-if_ether.h-for-ETH_AL.patch | 61 + ...ice-struct-copy-its-DMA-params-to-th.patch | 64 + ...pio-cascade-add-generic-GPIO-cascade.patch | 222 + .../810-pci_disable_common_quirks.patch | 62 + .../811-pci_disable_usb_common_quirks.patch | 115 + ...problem-with-platfom-data-in-w1-gpio.patch | 26 + .../pending-5.15/834-ledtrig-libata.patch | 149 + ...40-hwrng-bcm2835-set-quality-to-1000.patch | 26 + ..._wwan-add-ZTE-MF286D-modem-19d2-1485.patch | 59 + ...lace-custom-PCIE_CORE_INT_-macros-wi.patch | 40 + ...ark-Fix-reading-MSI-interrupt-number.patch | 57 + ...dvark-Fix-support-for-MSI-interrupts.patch | 72 + ...rite-IRQ-code-to-chained-IRQ-handler.patch | 125 + ...ck-return-value-of-generic_handle_do.patch | 31 + ...e-MSI-irq_chip-structures-static-dri.patch | 93 + ...e-msi_domain_info-structure-a-static.patch | 64 + ...-dev_fwnode-instead-of-of_node_to_fw.patch | 40 + ...actor-unmasking-summary-MSI-interrup.patch | 44 + ...d-support-for-masking-MSI-interrupts.patch | 117 + ...PCI-aardvark-Fix-setting-MSI-address.patch | 91 + ...12-PCI-aardvark-Enable-MSI-X-support.patch | 38 + ...-support-for-ERR-interrupt-on-emulat.patch | 100 + ...-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch | 44 + ...imize-writing-PCI_EXP_RTCTL_PMEIE-an.patch | 52 + ...dvark-Add-support-for-PME-interrupts.patch | 47 + ...-support-for-PME-requester-on-emulat.patch | 173 + ...-separate-INTA-interrupt-for-emulate.patch | 161 + ...ove-irq_mask_ack-callback-for-INTx-i.patch | 29 + ...aardvark-Don-t-mask-irq-when-mapping.patch | 27 + ...p-__maybe_unused-from-advk_pcie_disa.patch | 28 + ...ate-comment-about-link-going-down-af.patch | 35 + ...e-main-irq_chip-structure-a-static-d.patch | 102 + ...mvebu-a3700-comphy-Remove-port-from-.patch | 217 + ...mvebu-a3700-comphy-Add-native-kernel.patch | 1564 ++++ ...l-armada-37xx-Add-xtal-clock-to-comp.patch | 31 + ...mvebu-Make-SATA-PHY-optional-for-Arm.patch | 61 + ...xhci-mvebu-make-USB-3.0-PHY-optional.patch | 163 + ...ark-Fix-initialization-with-old-Marv.patch | 36 + .../pending-5.15/920-mangle_bootargs.patch | 71 + 441 files changed, 71106 insertions(+) create mode 100644 target/linux/generic/backport-5.15/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch create mode 100644 target/linux/generic/backport-5.15/011-kbuild-export-SUBARCH.patch create mode 100644 target/linux/generic/backport-5.15/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch create mode 100644 target/linux/generic/backport-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch create mode 100644 target/linux/generic/backport-5.15/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch create mode 100644 target/linux/generic/backport-5.15/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch create mode 100644 target/linux/generic/backport-5.15/080-wireguard-peer-put-frequently-used-members-above-cac.patch create mode 100644 target/linux/generic/backport-5.15/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch create mode 100644 target/linux/generic/backport-5.15/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch create mode 100644 target/linux/generic/backport-5.15/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch create mode 100644 target/linux/generic/backport-5.15/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch create mode 100644 target/linux/generic/backport-5.15/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch create mode 100644 target/linux/generic/backport-5.15/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch create mode 100644 target/linux/generic/backport-5.15/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch create mode 100644 target/linux/generic/backport-5.15/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch create mode 100644 target/linux/generic/backport-5.15/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch create mode 100644 target/linux/generic/backport-5.15/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch create mode 100644 target/linux/generic/backport-5.15/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch create mode 100644 target/linux/generic/backport-5.15/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch create mode 100644 target/linux/generic/backport-5.15/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch create mode 100644 target/linux/generic/backport-5.15/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch create mode 100644 target/linux/generic/backport-5.15/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch create mode 100644 target/linux/generic/backport-5.15/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch create mode 100644 target/linux/generic/backport-5.15/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch create mode 100644 target/linux/generic/backport-5.15/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch create mode 100644 target/linux/generic/backport-5.15/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch create mode 100644 target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch create mode 100644 target/linux/generic/backport-5.15/500-v5.13-ubifs-default-to-zstd-compression.patch create mode 100644 target/linux/generic/backport-5.15/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch create mode 100644 target/linux/generic/backport-5.15/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch create mode 100644 target/linux/generic/backport-5.15/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch create mode 100644 target/linux/generic/backport-5.15/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch create mode 100644 target/linux/generic/backport-5.15/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch create mode 100644 target/linux/generic/backport-5.15/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch create mode 100644 target/linux/generic/backport-5.15/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch create mode 100644 target/linux/generic/backport-5.15/705-net-phy-at803x-select-correct-page-on-config-init.patch create mode 100644 target/linux/generic/backport-5.15/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch create mode 100644 target/linux/generic/backport-5.15/710-v5.12-net-phy-Add-100-base-x-mode.patch create mode 100644 target/linux/generic/backport-5.15/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch create mode 100644 target/linux/generic/backport-5.15/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch create mode 100644 target/linux/generic/backport-5.15/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch create mode 100644 target/linux/generic/backport-5.15/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch create mode 100644 target/linux/generic/backport-5.15/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch create mode 100644 target/linux/generic/backport-5.15/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch create mode 100644 target/linux/generic/backport-5.15/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch create mode 100644 target/linux/generic/backport-5.15/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch create mode 100644 target/linux/generic/backport-5.15/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch create mode 100644 target/linux/generic/backport-5.15/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch create mode 100644 target/linux/generic/backport-5.15/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch create mode 100644 target/linux/generic/backport-5.15/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch create mode 100644 target/linux/generic/backport-5.15/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch create mode 100644 target/linux/generic/backport-5.15/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch create mode 100644 target/linux/generic/backport-5.15/732-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch create mode 100644 target/linux/generic/backport-5.15/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch create mode 100644 target/linux/generic/backport-5.15/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch create mode 100644 target/linux/generic/backport-5.15/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch create mode 100644 target/linux/generic/backport-5.15/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch create mode 100644 target/linux/generic/backport-5.15/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch create mode 100644 target/linux/generic/backport-5.15/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch create mode 100644 target/linux/generic/backport-5.15/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch create mode 100644 target/linux/generic/backport-5.15/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch create mode 100644 target/linux/generic/backport-5.15/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch create mode 100644 target/linux/generic/backport-5.15/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch create mode 100644 target/linux/generic/backport-5.15/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch create mode 100644 target/linux/generic/backport-5.15/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch create mode 100644 target/linux/generic/backport-5.15/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch create mode 100644 target/linux/generic/backport-5.15/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch create mode 100644 target/linux/generic/backport-5.15/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch create mode 100644 target/linux/generic/backport-5.15/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch create mode 100644 target/linux/generic/backport-5.15/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch create mode 100644 target/linux/generic/backport-5.15/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch create mode 100644 target/linux/generic/backport-5.15/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch create mode 100644 target/linux/generic/backport-5.15/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch create mode 100644 target/linux/generic/backport-5.15/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch create mode 100644 target/linux/generic/backport-5.15/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch create mode 100644 target/linux/generic/backport-5.15/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch create mode 100644 target/linux/generic/backport-5.15/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch create mode 100644 target/linux/generic/backport-5.15/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch create mode 100644 target/linux/generic/backport-5.15/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch create mode 100644 target/linux/generic/backport-5.15/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch create mode 100644 target/linux/generic/backport-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch create mode 100644 target/linux/generic/backport-5.15/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch create mode 100644 target/linux/generic/backport-5.15/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch create mode 100644 target/linux/generic/backport-5.15/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch create mode 100644 target/linux/generic/backport-5.15/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch create mode 100644 target/linux/generic/backport-5.15/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch create mode 100644 target/linux/generic/backport-5.15/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch create mode 100644 target/linux/generic/backport-5.15/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch create mode 100644 target/linux/generic/backport-5.15/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch create mode 100644 target/linux/generic/backport-5.15/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch create mode 100644 target/linux/generic/backport-5.15/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch create mode 100644 target/linux/generic/backport-5.15/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch create mode 100644 target/linux/generic/backport-5.15/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch create mode 100644 target/linux/generic/backport-5.15/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch create mode 100644 target/linux/generic/backport-5.15/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch create mode 100644 target/linux/generic/backport-5.15/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch create mode 100644 target/linux/generic/backport-5.15/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch create mode 100644 target/linux/generic/backport-5.15/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch create mode 100644 target/linux/generic/backport-5.15/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch create mode 100644 target/linux/generic/backport-5.15/765-v5.15-net-dsa-mt7530-disable-learning-on-standalone-ports.patch create mode 100644 target/linux/generic/backport-5.15/766-v5.15-net-dsa-mt7530-enable-assisted-learning-on-CPU-port.patch create mode 100644 target/linux/generic/backport-5.15/767-v5.15-net-dsa-mt7530-use-independent-VLAN-learning-on-VLAN.patch create mode 100644 target/linux/generic/backport-5.15/768-v5.15-net-dsa-mt7530-set-STP-state-on-filter-ID-1.patch create mode 100644 target/linux/generic/backport-5.15/769-v5.15-net-dsa-mt7530-always-install-FDB-entries-with-IVL-a.patch create mode 100644 target/linux/generic/backport-5.15/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch create mode 100644 target/linux/generic/backport-5.15/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch create mode 100644 target/linux/generic/backport-5.15/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch create mode 100644 target/linux/generic/backport-5.15/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch create mode 100644 target/linux/generic/backport-5.15/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch create mode 100644 target/linux/generic/backport-5.15/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch create mode 100644 target/linux/generic/backport-5.15/774-v5.15-2-igc-remove-phy-type-checking.patch create mode 100644 target/linux/generic/backport-5.15/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch create mode 100644 target/linux/generic/backport-5.15/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch create mode 100644 target/linux/generic/backport-5.15/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch create mode 100644 target/linux/generic/backport-5.15/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch create mode 100644 target/linux/generic/backport-5.15/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch create mode 100644 target/linux/generic/backport-5.15/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch create mode 100644 target/linux/generic/backport-5.15/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch create mode 100644 target/linux/generic/backport-5.15/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch create mode 100644 target/linux/generic/backport-5.15/788-v5.12-r8152-replace-netif_err-with-dev_err.patch create mode 100644 target/linux/generic/backport-5.15/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch create mode 100644 target/linux/generic/backport-5.15/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch create mode 100644 target/linux/generic/backport-5.15/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch create mode 100644 target/linux/generic/backport-5.15/792-v5.13-r8152-add-help-function-to-change-mtu.patch create mode 100644 target/linux/generic/backport-5.15/793-v5.13-r8152-support-new-chips.patch create mode 100644 target/linux/generic/backport-5.15/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch create mode 100644 target/linux/generic/backport-5.15/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch create mode 100644 target/linux/generic/backport-5.15/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch create mode 100644 target/linux/generic/backport-5.15/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch create mode 100644 target/linux/generic/backport-5.15/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch create mode 100644 target/linux/generic/backport-5.15/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch create mode 100644 target/linux/generic/backport-5.15/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch create mode 100644 target/linux/generic/backport-5.15/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch create mode 100644 target/linux/generic/backport-5.15/811-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch create mode 100644 target/linux/generic/backport-5.15/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch create mode 100644 target/linux/generic/backport-5.15/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch create mode 100644 target/linux/generic/backport-5.15/822-v5.13-advertise-lack-of-built-in-msi-handling.patch create mode 100644 target/linux/generic/backport-5.15/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch create mode 100644 target/linux/generic/backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch create mode 100644 target/linux/generic/backport-5.15/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch create mode 100644 target/linux/generic/backport-5.15/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch create mode 100644 target/linux/generic/backport-5.15/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch create mode 100644 target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch create mode 100644 target/linux/generic/config-5.15 create mode 100644 target/linux/generic/hack-5.15/204-module_strip.patch create mode 100644 target/linux/generic/hack-5.15/205-kconfig-exit.patch create mode 100644 target/linux/generic/hack-5.15/210-darwin_scripts_include.patch create mode 100644 target/linux/generic/hack-5.15/211-darwin-uuid-typedef-clash.patch create mode 100644 target/linux/generic/hack-5.15/212-tools_portability.patch create mode 100644 target/linux/generic/hack-5.15/214-spidev_h_portability.patch create mode 100644 target/linux/generic/hack-5.15/220-arm-gc_sections.patch create mode 100644 target/linux/generic/hack-5.15/221-module_exports.patch create mode 100644 target/linux/generic/hack-5.15/230-openwrt_lzma_options.patch create mode 100644 target/linux/generic/hack-5.15/249-udp-tunnel-selection.patch create mode 100644 target/linux/generic/hack-5.15/250-netfilter_depends.patch create mode 100644 target/linux/generic/hack-5.15/251-kconfig.patch create mode 100644 target/linux/generic/hack-5.15/252-SATA_PMP.patch create mode 100644 target/linux/generic/hack-5.15/253-ksmbd-config.patch create mode 100644 target/linux/generic/hack-5.15/259-regmap_dynamic.patch create mode 100644 target/linux/generic/hack-5.15/260-crypto_test_dependencies.patch create mode 100644 target/linux/generic/hack-5.15/261-lib-arc4-unhide.patch create mode 100644 target/linux/generic/hack-5.15/280-rfkill-stubs.patch create mode 100644 target/linux/generic/hack-5.15/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch create mode 100644 target/linux/generic/hack-5.15/301-mips_image_cmdline_hack.patch create mode 100644 target/linux/generic/hack-5.15/321-powerpc_crtsavres_prereq.patch create mode 100644 target/linux/generic/hack-5.15/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch create mode 100644 target/linux/generic/hack-5.15/402-mtd-blktrans-call-add-disks-after-mtd-device.patch create mode 100644 target/linux/generic/hack-5.15/410-block-fit-partition-parser.patch create mode 100644 target/linux/generic/hack-5.15/420-mtd-set-rootfs-to-be-root-dev.patch create mode 100644 target/linux/generic/hack-5.15/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch create mode 100644 target/linux/generic/hack-5.15/430-mtk-bmt-support.patch create mode 100644 target/linux/generic/hack-5.15/531-debloat_lzma.patch create mode 100644 target/linux/generic/hack-5.15/600-bridge_offload.patch create mode 100644 target/linux/generic/hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch create mode 100644 target/linux/generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch create mode 100644 target/linux/generic/hack-5.15/651-wireless_mesh_header.patch create mode 100644 target/linux/generic/hack-5.15/660-fq_codel_defaults.patch create mode 100644 target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch create mode 100644 target/linux/generic/hack-5.15/710-net-dsa-mv88e6xxx-default-VID-1.patch create mode 100644 target/linux/generic/hack-5.15/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch create mode 100644 target/linux/generic/hack-5.15/720-net-phy-add-aqr-phys.patch create mode 100644 target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch create mode 100644 target/linux/generic/hack-5.15/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch create mode 100644 target/linux/generic/hack-5.15/723-net-phy-aquantia-fix-system-side-protocol-mi.patch create mode 100644 target/linux/generic/hack-5.15/724-net-phy-aquantia-Add-AQR113-driver-support.patch create mode 100644 target/linux/generic/hack-5.15/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch create mode 100644 target/linux/generic/hack-5.15/760-net-usb-r8152-add-LED-configuration-from-OF.patch create mode 100644 target/linux/generic/hack-5.15/761-dt-bindings-net-add-RTL8152-binding-documentation.patch create mode 100644 target/linux/generic/hack-5.15/773-bgmac-add-srab-switch.patch create mode 100644 target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch create mode 100644 target/linux/generic/hack-5.15/800-GPIO-add-named-gpio-exports.patch create mode 100644 target/linux/generic/hack-5.15/901-debloat_sock_diag.patch create mode 100644 target/linux/generic/hack-5.15/902-debloat_proc.patch create mode 100644 target/linux/generic/hack-5.15/904-debloat_dma_buf.patch create mode 100644 target/linux/generic/hack-5.15/910-kobject_uevent.patch create mode 100644 target/linux/generic/hack-5.15/911-kobject_add_broadcast_uevent.patch create mode 100644 target/linux/generic/hack-5.15/920-device_tree_cmdline.patch create mode 100644 target/linux/generic/pending-5.15/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch create mode 100644 target/linux/generic/pending-5.15/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch create mode 100644 target/linux/generic/pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch create mode 100644 target/linux/generic/pending-5.15/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch create mode 100644 target/linux/generic/pending-5.15/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch create mode 100644 target/linux/generic/pending-5.15/130-add-linux-spidev-compatible-si3210.patch create mode 100644 target/linux/generic/pending-5.15/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch create mode 100644 target/linux/generic/pending-5.15/141-jffs2-add-RENAME_EXCHANGE-support.patch create mode 100644 target/linux/generic/pending-5.15/142-jffs2-add-splice-ops.patch create mode 100644 target/linux/generic/pending-5.15/150-bridge_allow_receiption_on_disabled_port.patch create mode 100644 target/linux/generic/pending-5.15/190-rtc-rs5c372-support_alarms_up_to_1_week.patch create mode 100644 target/linux/generic/pending-5.15/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch create mode 100644 target/linux/generic/pending-5.15/201-extra_optimization.patch create mode 100644 target/linux/generic/pending-5.15/203-kallsyms_uncompressed.patch create mode 100644 target/linux/generic/pending-5.15/205-backtrace_module_info.patch create mode 100644 target/linux/generic/pending-5.15/240-remove-unsane-filenames-from-deps_initramfs-list.patch create mode 100644 target/linux/generic/pending-5.15/261-enable_wilink_platform_without_drivers.patch create mode 100644 target/linux/generic/pending-5.15/270-platform-mikrotik-build-bits.patch create mode 100644 target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch create mode 100644 target/linux/generic/pending-5.15/302-mips_no_branch_likely.patch create mode 100644 target/linux/generic/pending-5.15/305-mips_module_reloc.patch create mode 100644 target/linux/generic/pending-5.15/307-mips_highmem_offset.patch create mode 100644 target/linux/generic/pending-5.15/308-mips32r2_tune.patch create mode 100644 target/linux/generic/pending-5.15/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch create mode 100644 target/linux/generic/pending-5.15/310-arm_module_unresolved_weak_sym.patch create mode 100644 target/linux/generic/pending-5.15/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch create mode 100644 target/linux/generic/pending-5.15/332-arc-add-OWRTDTB-section.patch create mode 100644 target/linux/generic/pending-5.15/333-arc-enable-unaligned-access-in-kernel-mode.patch create mode 100644 target/linux/generic/pending-5.15/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch create mode 100644 target/linux/generic/pending-5.15/400-mtd-mtdsplit-support.patch create mode 100644 target/linux/generic/pending-5.15/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch create mode 100644 target/linux/generic/pending-5.15/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch create mode 100644 target/linux/generic/pending-5.15/419-mtd-redboot-add-of_match_table-with-DT-binding.patch create mode 100644 target/linux/generic/pending-5.15/420-mtd-redboot_space.patch create mode 100644 target/linux/generic/pending-5.15/430-mtd-add-myloader-partition-parser.patch create mode 100644 target/linux/generic/pending-5.15/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch create mode 100644 target/linux/generic/pending-5.15/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch create mode 100644 target/linux/generic/pending-5.15/435-mtd-add-routerbootpart-parser-config.patch create mode 100644 target/linux/generic/pending-5.15/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch create mode 100644 target/linux/generic/pending-5.15/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch create mode 100644 target/linux/generic/pending-5.15/465-m25p80-mx-disable-software-protection.patch create mode 100644 target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch create mode 100644 target/linux/generic/pending-5.15/476-mtd-spi-nor-add-eon-en25q128.patch create mode 100644 target/linux/generic/pending-5.15/479-mtd-spi-nor-add-xtx-xt25f128b.patch create mode 100644 target/linux/generic/pending-5.15/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch create mode 100644 target/linux/generic/pending-5.15/483-mtd-spi-nor-add-gd25q512.patch create mode 100644 target/linux/generic/pending-5.15/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch create mode 100644 target/linux/generic/pending-5.15/484-mtd-spi-nor-add-esmt-f25l16pa.patch create mode 100644 target/linux/generic/pending-5.15/485-mtd-spi-nor-add-xmc-xm25qh128c.patch create mode 100644 target/linux/generic/pending-5.15/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch create mode 100644 target/linux/generic/pending-5.15/491-ubi-auto-create-ubiblock-device-for-rootfs.patch create mode 100644 target/linux/generic/pending-5.15/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch create mode 100644 target/linux/generic/pending-5.15/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch create mode 100644 target/linux/generic/pending-5.15/494-mtd-ubi-add-EOF-marker-support.patch create mode 100644 target/linux/generic/pending-5.15/495-mtd-core-add-get_mtd_device_by_node.patch create mode 100644 target/linux/generic/pending-5.15/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch create mode 100644 target/linux/generic/pending-5.15/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch create mode 100644 target/linux/generic/pending-5.15/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch create mode 100644 target/linux/generic/pending-5.15/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch create mode 100644 target/linux/generic/pending-5.15/500-fs_cdrom_dependencies.patch create mode 100644 target/linux/generic/pending-5.15/530-jffs2_make_lzma_available.patch create mode 100644 target/linux/generic/pending-5.15/532-jffs2_eofdetect.patch create mode 100644 target/linux/generic/pending-5.15/600-netfilter_conntrack_flush.patch create mode 100644 target/linux/generic/pending-5.15/610-netfilter_match_bypass_default_checks.patch create mode 100644 target/linux/generic/pending-5.15/611-netfilter_match_bypass_default_table.patch create mode 100644 target/linux/generic/pending-5.15/612-netfilter_match_reduce_memory_access.patch create mode 100644 target/linux/generic/pending-5.15/613-netfilter_optional_tcp_window_check.patch create mode 100644 target/linux/generic/pending-5.15/620-net_sched-codel-do-not-defer-queue-length-update.patch create mode 100644 target/linux/generic/pending-5.15/630-packet_socket_type.patch create mode 100644 target/linux/generic/pending-5.15/655-increase_skb_pad.patch create mode 100644 target/linux/generic/pending-5.15/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch create mode 100644 target/linux/generic/pending-5.15/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch create mode 100644 target/linux/generic/pending-5.15/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch create mode 100644 target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch create mode 100644 target/linux/generic/pending-5.15/682-of_net-add-mac-address-increment-support.patch create mode 100644 target/linux/generic/pending-5.15/683-of_net-add-mac-address-to-of-tree.patch create mode 100644 target/linux/generic/pending-5.15/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch create mode 100644 target/linux/generic/pending-5.15/701-net-ethernet-mtk_eth_soc-add-ipv6-flow-offloading-support.patch create mode 100644 target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch create mode 100644 target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch create mode 100644 target/linux/generic/pending-5.15/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch create mode 100644 target/linux/generic/pending-5.15/730-net-phy-at803x-fix-feature-detection.patch create mode 100644 target/linux/generic/pending-5.15/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch create mode 100644 target/linux/generic/pending-5.15/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch create mode 100644 target/linux/generic/pending-5.15/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch create mode 100644 target/linux/generic/pending-5.15/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch create mode 100644 target/linux/generic/pending-5.15/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch create mode 100644 target/linux/generic/pending-5.15/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch create mode 100644 target/linux/generic/pending-5.15/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch create mode 100644 target/linux/generic/pending-5.15/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch create mode 100644 target/linux/generic/pending-5.15/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch create mode 100644 target/linux/generic/pending-5.15/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch create mode 100644 target/linux/generic/pending-5.15/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch create mode 100644 target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch create mode 100644 target/linux/generic/pending-5.15/811-pci_disable_usb_common_quirks.patch create mode 100644 target/linux/generic/pending-5.15/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch create mode 100644 target/linux/generic/pending-5.15/834-ledtrig-libata.patch create mode 100644 target/linux/generic/pending-5.15/840-hwrng-bcm2835-set-quality-to-1000.patch create mode 100644 target/linux/generic/pending-5.15/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch create mode 100644 target/linux/generic/pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch create mode 100644 target/linux/generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch create mode 100644 target/linux/generic/pending-5.15/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch create mode 100644 target/linux/generic/pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch create mode 100644 target/linux/generic/pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch create mode 100644 target/linux/generic/pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch create mode 100644 target/linux/generic/pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch create mode 100644 target/linux/generic/pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch create mode 100644 target/linux/generic/pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch create mode 100644 target/linux/generic/pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch create mode 100644 target/linux/generic/pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch create mode 100644 target/linux/generic/pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch create mode 100644 target/linux/generic/pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch create mode 100644 target/linux/generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch create mode 100644 target/linux/generic/pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch create mode 100644 target/linux/generic/pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch create mode 100644 target/linux/generic/pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch create mode 100644 target/linux/generic/pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch create mode 100644 target/linux/generic/pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch create mode 100644 target/linux/generic/pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch create mode 100644 target/linux/generic/pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch create mode 100644 target/linux/generic/pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch create mode 100644 target/linux/generic/pending-5.15/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch create mode 100644 target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch create mode 100644 target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch create mode 100644 target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch create mode 100644 target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch create mode 100644 target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch create mode 100644 target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch create mode 100644 target/linux/generic/pending-5.15/920-mangle_bootargs.patch diff --git a/target/linux/generic/backport-5.15/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-5.15/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch new file mode 100644 index 0000000000..7ac4f9d240 --- /dev/null +++ b/target/linux/generic/backport-5.15/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch @@ -0,0 +1,30 @@ +From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Mon, 18 Jan 2016 12:27:49 +0100 +Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in + scripts/ld-version.sh + +On some systems /usr/bin/awk does not exist, or is broken. Find it via +$PATH instead. + +Signed-off-by: Felix Fietkau +--- + scripts/ld-version.sh | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/scripts/ld-version.sh ++++ b/scripts/ld-version.sh +@@ -1,6 +1,7 @@ +-#!/usr/bin/awk -f ++#!/bin/sh + # SPDX-License-Identifier: GPL-2.0 + # extract linker version number from stdin and turn into single number ++exec awk ' + { + gsub(".*\\)", ""); + gsub(".*version ", ""); +@@ -9,3 +10,4 @@ + print a[1]*100000000 + a[2]*1000000 + a[3]*10000; + exit + } ++' diff --git a/target/linux/generic/backport-5.15/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-5.15/011-kbuild-export-SUBARCH.patch new file mode 100644 index 0000000000..bb99e4ddbf --- /dev/null +++ b/target/linux/generic/backport-5.15/011-kbuild-export-SUBARCH.patch @@ -0,0 +1,21 @@ +From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sun, 9 Jul 2017 00:26:53 +0200 +Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86 + +Signed-off-by: Felix Fietkau +--- + Makefile | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/Makefile ++++ b/Makefile +@@ -507,7 +507,7 @@ KBUILD_LDFLAGS_MODULE := + KBUILD_LDFLAGS := + CLANG_FLAGS := + +-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC ++export ARCH SRCARCH SUBARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC + export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL + export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX + export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD diff --git a/target/linux/generic/backport-5.15/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch b/target/linux/generic/backport-5.15/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch new file mode 100644 index 0000000000..66e75bf514 --- /dev/null +++ b/target/linux/generic/backport-5.15/026-power-reset-linkstation-poweroff-add-missing-put_dev.patch @@ -0,0 +1,27 @@ +From 1027a42c25cbf8cfc4ade6503c5110aae04866af Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= +Date: Fri, 16 Oct 2020 20:22:37 +0200 +Subject: [PATCH] power: reset: linkstation-poweroff: add missing put_device() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The of_mdio_find_bus() takes a reference to the underlying device +structure, we should release that reference using a put_device() call. + +Signed-off-by: Daniel González Cabanelas +Signed-off-by: Sebastian Reichel +--- + drivers/power/reset/linkstation-poweroff.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/power/reset/linkstation-poweroff.c ++++ b/drivers/power/reset/linkstation-poweroff.c +@@ -113,6 +113,7 @@ static int __init linkstation_poweroff_i + return -EPROBE_DEFER; + + phydev = phy_find_first(bus); ++ put_device(&bus->dev); + if (!phydev) + return -EPROBE_DEFER; + diff --git a/target/linux/generic/backport-5.15/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch b/target/linux/generic/backport-5.15/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch new file mode 100644 index 0000000000..82feb7421d --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-00-MIPS-uasm-Enable-muhu-opcode-for-MIPS-R6.patch @@ -0,0 +1,65 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:02 +0200 +Subject: [PATCH] MIPS: uasm: Enable muhu opcode for MIPS R6 + +Enable the 'muhu' instruction, complementing the existing 'mulu', needed +to implement a MIPS32 BPF JIT. + +Also fix a typo in the existing definition of 'dmulu'. + +Signed-off-by: Tony Ambardar + +This patch is a dependency for my 32-bit MIPS eBPF JIT. + +Signed-off-by: Johan Almbladh +--- + +--- a/arch/mips/include/asm/uasm.h ++++ b/arch/mips/include/asm/uasm.h +@@ -145,6 +145,7 @@ Ip_u1(_mtlo); + Ip_u3u1u2(_mul); + Ip_u1u2(_multu); + Ip_u3u1u2(_mulu); ++Ip_u3u1u2(_muhu); + Ip_u3u1u2(_nor); + Ip_u3u1u2(_or); + Ip_u2u1u3(_ori); +--- a/arch/mips/mm/uasm-mips.c ++++ b/arch/mips/mm/uasm-mips.c +@@ -90,7 +90,7 @@ static const struct insn insn_table[insn + RS | RT | RD}, + [insn_dmtc0] = {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET}, + [insn_dmultu] = {M(spec_op, 0, 0, 0, 0, dmultu_op), RS | RT}, +- [insn_dmulu] = {M(spec_op, 0, 0, 0, dmult_dmul_op, dmultu_op), ++ [insn_dmulu] = {M(spec_op, 0, 0, 0, dmultu_dmulu_op, dmultu_op), + RS | RT | RD}, + [insn_drotr] = {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE}, + [insn_drotr32] = {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE}, +@@ -150,6 +150,8 @@ static const struct insn insn_table[insn + [insn_mtlo] = {M(spec_op, 0, 0, 0, 0, mtlo_op), RS}, + [insn_mulu] = {M(spec_op, 0, 0, 0, multu_mulu_op, multu_op), + RS | RT | RD}, ++ [insn_muhu] = {M(spec_op, 0, 0, 0, multu_muhu_op, multu_op), ++ RS | RT | RD}, + #ifndef CONFIG_CPU_MIPSR6 + [insn_mul] = {M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD}, + #else +--- a/arch/mips/mm/uasm.c ++++ b/arch/mips/mm/uasm.c +@@ -59,7 +59,7 @@ enum opcode { + insn_lddir, insn_ldpte, insn_ldx, insn_lh, insn_lhu, insn_ll, insn_lld, + insn_lui, insn_lw, insn_lwu, insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi, + insn_mflo, insn_modu, insn_movn, insn_movz, insn_mtc0, insn_mthc0, +- insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_nor, ++ insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_mulu, insn_muhu, insn_nor, + insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sb, insn_sc, + insn_scd, insn_seleqz, insn_selnez, insn_sd, insn_sh, insn_sll, + insn_sllv, insn_slt, insn_slti, insn_sltiu, insn_sltu, insn_sra, +@@ -344,6 +344,7 @@ I_u1(_mtlo) + I_u3u1u2(_mul) + I_u1u2(_multu) + I_u3u1u2(_mulu) ++I_u3u1u2(_muhu) + I_u3u1u2(_nor) + I_u3u1u2(_or) + I_u2u1u3(_ori) diff --git a/target/linux/generic/backport-5.15/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch b/target/linux/generic/backport-5.15/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch new file mode 100644 index 0000000000..3a4d573f80 --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-01-mips-uasm-Add-workaround-for-Loongson-2F-nop-CPU-err.patch @@ -0,0 +1,31 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:03 +0200 +Subject: [PATCH] mips: uasm: Add workaround for Loongson-2F nop CPU errata + +This patch implements a workaround for the Loongson-2F nop in generated, +code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before, +the binutils option -mfix-loongson2f-nop was enabled, but no workaround +was done when emitting MIPS code. Now, the nop pseudo instruction is +emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This +is consistent with the workaround implemented by binutils. + +Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html + +Signed-off-by: Johan Almbladh +Reviewed-by: Jiaxun Yang +--- + +--- a/arch/mips/include/asm/uasm.h ++++ b/arch/mips/include/asm/uasm.h +@@ -249,7 +249,11 @@ static inline void uasm_l##lb(struct uas + #define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off) + #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3) + #define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b) ++#ifdef CONFIG_CPU_NOP_WORKAROUNDS ++#define uasm_i_nop(buf) uasm_i_or(buf, 1, 1, 0) ++#else + #define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0) ++#endif + #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1) + + static inline void uasm_i_drotr_safe(u32 **p, unsigned int a1, diff --git a/target/linux/generic/backport-5.15/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch b/target/linux/generic/backport-5.15/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch new file mode 100644 index 0000000000..7980659961 --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-02-mips-bpf-Add-eBPF-JIT-for-32-bit-MIPS.patch @@ -0,0 +1,3078 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:04 +0200 +Subject: [PATCH] mips: bpf: Add eBPF JIT for 32-bit MIPS + +This is an implementation of an eBPF JIT for 32-bit MIPS I-V and MIPS32. +The implementation supports all 32-bit and 64-bit ALU and JMP operations, +including the recently-added atomics. 64-bit div/mod and 64-bit atomics +are implemented using function calls to math64 and atomic64 functions, +respectively. All 32-bit operations are implemented natively by the JIT, +except if the CPU lacks ll/sc instructions. + +Register mapping +================ +All 64-bit eBPF registers are mapped to native 32-bit MIPS register pairs, +and does not use any stack scratch space for register swapping. This means +that all eBPF register data is kept in CPU registers all the time, and +this simplifies the register management a lot. It also reduces the JIT's +pressure on temporary registers since we do not have to move data around. + +Native register pairs are ordered according to CPU endiannes, following +the O32 calling convention for passing 64-bit arguments and return values. +The eBPF return value, arguments and callee-saved registers are mapped to +their native MIPS equivalents. + +Since the 32 highest bits in the eBPF FP (frame pointer) register are +always zero, only one general-purpose register is actually needed for the +mapping. The MIPS fp register is used for this purpose. The high bits are +mapped to MIPS register r0. This saves us one CPU register, which is much +needed for temporaries, while still allowing us to treat the R10 (FP) +register just like any other eBPF register in the JIT. + +The MIPS gp (global pointer) and at (assembler temporary) registers are +used as internal temporary registers for constant blinding. CPU registers +t6-t9 are used internally by the JIT when constructing more complex 64-bit +operations. This is precisely what is needed - two registers to store an +operand value, and two more as scratch registers when performing the +operation. + +The register mapping is shown below. + + R0 - $v1, $v0 return value + R1 - $a1, $a0 argument 1, passed in registers + R2 - $a3, $a2 argument 2, passed in registers + R3 - $t1, $t0 argument 3, passed on stack + R4 - $t3, $t2 argument 4, passed on stack + R5 - $t4, $t3 argument 5, passed on stack + R6 - $s1, $s0 callee-saved + R7 - $s3, $s2 callee-saved + R8 - $s5, $s4 callee-saved + R9 - $s7, $s6 callee-saved + FP - $r0, $fp 32-bit frame pointer + AX - $gp, $at constant-blinding + $t6 - $t9 unallocated, JIT temporaries + +Jump offsets +============ +The JIT tries to map all conditional JMP operations to MIPS conditional +PC-relative branches. The MIPS branch offset field is 18 bits, in bytes, +which is equivalent to the eBPF 16-bit instruction offset. However, since +the JIT may emit more than one CPU instruction per eBPF instruction, the +field width may overflow. If that happens, the JIT converts the long +conditional jump to a short PC-relative branch with the condition +inverted, jumping over a long unconditional absolute jmp (j). + +This conversion will change the instruction offset mapping used for jumps, +and may in turn result in more branch offset overflows. The JIT therefore +dry-runs the translation until no more branches are converted and the +offsets do not change anymore. There is an upper bound on this of course, +and if the JIT hits that limit, the last two iterations are run with all +branches being converted. + +Tail call count +=============== +The current tail call count is stored in the 16-byte area of the caller's +stack frame that is reserved for the callee in the o32 ABI. The value is +initialized in the prologue, and propagated to the tail-callee by skipping +the initialization instructions when emitting the tail call. + +Signed-off-by: Johan Almbladh +--- + create mode 100644 arch/mips/net/bpf_jit_comp.c + create mode 100644 arch/mips/net/bpf_jit_comp.h + create mode 100644 arch/mips/net/bpf_jit_comp32.c + +--- a/arch/mips/net/Makefile ++++ b/arch/mips/net/Makefile +@@ -2,4 +2,9 @@ + # MIPS networking code + + obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o +-obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o ++ ++ifeq ($(CONFIG_32BIT),y) ++ obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o ++else ++ obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o ++endif +--- /dev/null ++++ b/arch/mips/net/bpf_jit_comp.c +@@ -0,0 +1,1020 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Just-In-Time compiler for eBPF bytecode on MIPS. ++ * Implementation of JIT functions common to 32-bit and 64-bit CPUs. ++ * ++ * Copyright (c) 2021 Anyfi Networks AB. ++ * Author: Johan Almbladh ++ * ++ * Based on code and ideas from ++ * Copyright (c) 2017 Cavium, Inc. ++ * Copyright (c) 2017 Shubham Bansal ++ * Copyright (c) 2011 Mircea Gherzan ++ */ ++ ++/* ++ * Code overview ++ * ============= ++ * ++ * - bpf_jit_comp.h ++ * Common definitions and utilities. ++ * ++ * - bpf_jit_comp.c ++ * Implementation of JIT top-level logic and exported JIT API functions. ++ * Implementation of internal operations shared by 32-bit and 64-bit code. ++ * JMP and ALU JIT control code, register control code, shared ALU and ++ * JMP/JMP32 JIT operations. ++ * ++ * - bpf_jit_comp32.c ++ * Implementation of functions to JIT prologue, epilogue and a single eBPF ++ * instruction for 32-bit MIPS CPUs. The functions use shared operations ++ * where possible, and implement the rest for 32-bit MIPS such as ALU64 ++ * operations. ++ * ++ * - bpf_jit_comp64.c ++ * Ditto, for 64-bit MIPS CPUs. ++ * ++ * Zero and sign extension ++ * ======================== ++ * 32-bit MIPS instructions on 64-bit MIPS registers use sign extension, ++ * but the eBPF instruction set mandates zero extension. We let the verifier ++ * insert explicit zero-extensions after 32-bit ALU operations, both for ++ * 32-bit and 64-bit MIPS JITs. Conditional JMP32 operations on 64-bit MIPs ++ * are JITed with sign extensions inserted when so expected. ++ * ++ * ALU operations ++ * ============== ++ * ALU operations on 32/64-bit MIPS and ALU64 operations on 64-bit MIPS are ++ * JITed in the following steps. ALU64 operations on 32-bit MIPS are more ++ * complicated and therefore only processed by special implementations in ++ * step (3). ++ * ++ * 1) valid_alu_i: ++ * Determine if an immediate operation can be emitted as such, or if ++ * we must fall back to the register version. ++ * ++ * 2) rewrite_alu_i: ++ * Convert BPF operation and immediate value to a canonical form for ++ * JITing. In some degenerate cases this form may be a no-op. ++ * ++ * 3) emit_alu_{i,i64,r,64}: ++ * Emit instructions for an ALU or ALU64 immediate or register operation. ++ * ++ * JMP operations ++ * ============== ++ * JMP and JMP32 operations require an JIT instruction offset table for ++ * translating the jump offset. This table is computed by dry-running the ++ * JIT without actually emitting anything. However, the computed PC-relative ++ * offset may overflow the 18-bit offset field width of the native MIPS ++ * branch instruction. In such cases, the long jump is converted into the ++ * following sequence. ++ * ++ * ! +2 Inverted PC-relative branch ++ * nop Delay slot ++ * j Unconditional absolute long jump ++ * nop Delay slot ++ * ++ * Since this converted sequence alters the offset table, all offsets must ++ * be re-calculated. This may in turn trigger new branch conversions, so ++ * the process is repeated until no further changes are made. Normally it ++ * completes in 1-2 iterations. If JIT_MAX_ITERATIONS should reached, we ++ * fall back to converting every remaining jump operation. The branch ++ * conversion is independent of how the JMP or JMP32 condition is JITed. ++ * ++ * JMP32 and JMP operations are JITed as follows. ++ * ++ * 1) setup_jmp_{i,r}: ++ * Convert jump conditional and offset into a form that can be JITed. ++ * This form may be a no-op, a canonical form, or an inverted PC-relative ++ * jump if branch conversion is necessary. ++ * ++ * 2) valid_jmp_i: ++ * Determine if an immediate operations can be emitted as such, or if ++ * we must fall back to the register version. Applies to JMP32 for 32-bit ++ * MIPS, and both JMP and JMP32 for 64-bit MIPS. ++ * ++ * 3) emit_jmp_{i,i64,r,r64}: ++ * Emit instructions for an JMP or JMP32 immediate or register operation. ++ * ++ * 4) finish_jmp_{i,r}: ++ * Emit any instructions needed to finish the jump. This includes a nop ++ * for the delay slot if a branch was emitted, and a long absolute jump ++ * if the branch was converted. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bpf_jit_comp.h" ++ ++/* Convenience macros for descriptor access */ ++#define CONVERTED(desc) ((desc) & JIT_DESC_CONVERT) ++#define INDEX(desc) ((desc) & ~JIT_DESC_CONVERT) ++ ++/* ++ * Push registers on the stack, starting at a given depth from the stack ++ * pointer and increasing. The next depth to be written is returned. ++ */ ++int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth) ++{ ++ int reg; ++ ++ for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++) ++ if (mask & BIT(reg)) { ++ if ((excl & BIT(reg)) == 0) { ++ if (sizeof(long) == 4) ++ emit(ctx, sw, reg, depth, MIPS_R_SP); ++ else /* sizeof(long) == 8 */ ++ emit(ctx, sd, reg, depth, MIPS_R_SP); ++ } ++ depth += sizeof(long); ++ } ++ ++ ctx->stack_used = max((int)ctx->stack_used, depth); ++ return depth; ++} ++ ++/* ++ * Pop registers from the stack, starting at a given depth from the stack ++ * pointer and increasing. The next depth to be read is returned. ++ */ ++int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth) ++{ ++ int reg; ++ ++ for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++) ++ if (mask & BIT(reg)) { ++ if ((excl & BIT(reg)) == 0) { ++ if (sizeof(long) == 4) ++ emit(ctx, lw, reg, depth, MIPS_R_SP); ++ else /* sizeof(long) == 8 */ ++ emit(ctx, ld, reg, depth, MIPS_R_SP); ++ } ++ depth += sizeof(long); ++ } ++ ++ return depth; ++} ++ ++/* Compute the 28-bit jump target address from a BPF program location */ ++int get_target(struct jit_context *ctx, u32 loc) ++{ ++ u32 index = INDEX(ctx->descriptors[loc]); ++ unsigned long pc = (unsigned long)&ctx->target[ctx->jit_index]; ++ unsigned long addr = (unsigned long)&ctx->target[index]; ++ ++ if (!ctx->target) ++ return 0; ++ ++ if ((addr ^ pc) & ~MIPS_JMP_MASK) ++ return -1; ++ ++ return addr & MIPS_JMP_MASK; ++} ++ ++/* Compute the PC-relative offset to relative BPF program offset */ ++int get_offset(const struct jit_context *ctx, int off) ++{ ++ return (INDEX(ctx->descriptors[ctx->bpf_index + off]) - ++ ctx->jit_index - 1) * sizeof(u32); ++} ++ ++/* dst = imm (register width) */ ++void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm) ++{ ++ if (imm >= -0x8000 && imm <= 0x7fff) { ++ emit(ctx, addiu, dst, MIPS_R_ZERO, imm); ++ } else { ++ emit(ctx, lui, dst, (s16)((u32)imm >> 16)); ++ emit(ctx, ori, dst, dst, (u16)(imm & 0xffff)); ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* dst = src (register width) */ ++void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src) ++{ ++ emit(ctx, ori, dst, src, 0); ++ clobber_reg(ctx, dst); ++} ++ ++/* Validate ALU immediate range */ ++bool valid_alu_i(u8 op, s32 imm) ++{ ++ switch (BPF_OP(op)) { ++ case BPF_NEG: ++ case BPF_LSH: ++ case BPF_RSH: ++ case BPF_ARSH: ++ /* All legal eBPF values are valid */ ++ return true; ++ case BPF_ADD: ++ /* imm must be 16 bits */ ++ return imm >= -0x8000 && imm <= 0x7fff; ++ case BPF_SUB: ++ /* -imm must be 16 bits */ ++ return imm >= -0x7fff && imm <= 0x8000; ++ case BPF_AND: ++ case BPF_OR: ++ case BPF_XOR: ++ /* imm must be 16 bits unsigned */ ++ return imm >= 0 && imm <= 0xffff; ++ case BPF_MUL: ++ /* imm must be zero or a positive power of two */ ++ return imm == 0 || (imm > 0 && is_power_of_2(imm)); ++ case BPF_DIV: ++ case BPF_MOD: ++ /* imm must be an 17-bit power of two */ ++ return (u32)imm <= 0x10000 && is_power_of_2((u32)imm); ++ } ++ return false; ++} ++ ++/* Rewrite ALU immediate operation */ ++bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val) ++{ ++ bool act = true; ++ ++ switch (BPF_OP(op)) { ++ case BPF_LSH: ++ case BPF_RSH: ++ case BPF_ARSH: ++ case BPF_ADD: ++ case BPF_SUB: ++ case BPF_OR: ++ case BPF_XOR: ++ /* imm == 0 is a no-op */ ++ act = imm != 0; ++ break; ++ case BPF_MUL: ++ if (imm == 1) { ++ /* dst * 1 is a no-op */ ++ act = false; ++ } else if (imm == 0) { ++ /* dst * 0 is dst & 0 */ ++ op = BPF_AND; ++ } else { ++ /* dst * (1 << n) is dst << n */ ++ op = BPF_LSH; ++ imm = ilog2(abs(imm)); ++ } ++ break; ++ case BPF_DIV: ++ if (imm == 1) { ++ /* dst / 1 is a no-op */ ++ act = false; ++ } else { ++ /* dst / (1 << n) is dst >> n */ ++ op = BPF_RSH; ++ imm = ilog2(imm); ++ } ++ break; ++ case BPF_MOD: ++ /* dst % (1 << n) is dst & ((1 << n) - 1) */ ++ op = BPF_AND; ++ imm--; ++ break; ++ } ++ ++ *alu = op; ++ *val = imm; ++ return act; ++} ++ ++/* ALU immediate operation (32-bit) */ ++void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = -dst */ ++ case BPF_NEG: ++ emit(ctx, subu, dst, MIPS_R_ZERO, dst); ++ break; ++ /* dst = dst & imm */ ++ case BPF_AND: ++ emit(ctx, andi, dst, dst, (u16)imm); ++ break; ++ /* dst = dst | imm */ ++ case BPF_OR: ++ emit(ctx, ori, dst, dst, (u16)imm); ++ break; ++ /* dst = dst ^ imm */ ++ case BPF_XOR: ++ emit(ctx, xori, dst, dst, (u16)imm); ++ break; ++ /* dst = dst << imm */ ++ case BPF_LSH: ++ emit(ctx, sll, dst, dst, imm); ++ break; ++ /* dst = dst >> imm */ ++ case BPF_RSH: ++ emit(ctx, srl, dst, dst, imm); ++ break; ++ /* dst = dst >> imm (arithmetic) */ ++ case BPF_ARSH: ++ emit(ctx, sra, dst, dst, imm); ++ break; ++ /* dst = dst + imm */ ++ case BPF_ADD: ++ emit(ctx, addiu, dst, dst, imm); ++ break; ++ /* dst = dst - imm */ ++ case BPF_SUB: ++ emit(ctx, addiu, dst, dst, -imm); ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* ALU register operation (32-bit) */ ++void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = dst & src */ ++ case BPF_AND: ++ emit(ctx, and, dst, dst, src); ++ break; ++ /* dst = dst | src */ ++ case BPF_OR: ++ emit(ctx, or, dst, dst, src); ++ break; ++ /* dst = dst ^ src */ ++ case BPF_XOR: ++ emit(ctx, xor, dst, dst, src); ++ break; ++ /* dst = dst << src */ ++ case BPF_LSH: ++ emit(ctx, sllv, dst, dst, src); ++ break; ++ /* dst = dst >> src */ ++ case BPF_RSH: ++ emit(ctx, srlv, dst, dst, src); ++ break; ++ /* dst = dst >> src (arithmetic) */ ++ case BPF_ARSH: ++ emit(ctx, srav, dst, dst, src); ++ break; ++ /* dst = dst + src */ ++ case BPF_ADD: ++ emit(ctx, addu, dst, dst, src); ++ break; ++ /* dst = dst - src */ ++ case BPF_SUB: ++ emit(ctx, subu, dst, dst, src); ++ break; ++ /* dst = dst * src */ ++ case BPF_MUL: ++ if (cpu_has_mips32r1 || cpu_has_mips32r6) { ++ emit(ctx, mul, dst, dst, src); ++ } else { ++ emit(ctx, multu, dst, src); ++ emit(ctx, mflo, dst); ++ } ++ break; ++ /* dst = dst / src */ ++ case BPF_DIV: ++ if (cpu_has_mips32r6) { ++ emit(ctx, divu_r6, dst, dst, src); ++ } else { ++ emit(ctx, divu, dst, src); ++ emit(ctx, mflo, dst); ++ } ++ break; ++ /* dst = dst % src */ ++ case BPF_MOD: ++ if (cpu_has_mips32r6) { ++ emit(ctx, modu, dst, dst, src); ++ } else { ++ emit(ctx, divu, dst, src); ++ emit(ctx, mfhi, dst); ++ } ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Atomic read-modify-write (32-bit) */ ++void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code) ++{ ++ emit(ctx, ll, MIPS_R_T9, off, dst); ++ switch (code) { ++ case BPF_ADD: ++ emit(ctx, addu, MIPS_R_T8, MIPS_R_T9, src); ++ break; ++ case BPF_AND: ++ emit(ctx, and, MIPS_R_T8, MIPS_R_T9, src); ++ break; ++ case BPF_OR: ++ emit(ctx, or, MIPS_R_T8, MIPS_R_T9, src); ++ break; ++ case BPF_XOR: ++ emit(ctx, xor, MIPS_R_T8, MIPS_R_T9, src); ++ break; ++ } ++ emit(ctx, sc, MIPS_R_T8, off, dst); ++ emit(ctx, beqz, MIPS_R_T8, -16); ++ emit(ctx, nop); /* Delay slot */ ++} ++ ++/* Atomic compare-and-exchange (32-bit) */ ++void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off) ++{ ++ emit(ctx, ll, MIPS_R_T9, off, dst); ++ emit(ctx, bne, MIPS_R_T9, res, 12); ++ emit(ctx, move, MIPS_R_T8, src); /* Delay slot */ ++ emit(ctx, sc, MIPS_R_T8, off, dst); ++ emit(ctx, beqz, MIPS_R_T8, -20); ++ emit(ctx, move, res, MIPS_R_T9); /* Delay slot */ ++ clobber_reg(ctx, res); ++} ++ ++/* Swap bytes and truncate a register word or half word */ ++void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width) ++{ ++ u8 tmp = MIPS_R_T8; ++ u8 msk = MIPS_R_T9; ++ ++ switch (width) { ++ /* Swap bytes in a word */ ++ case 32: ++ if (cpu_has_mips32r2 || cpu_has_mips32r6) { ++ emit(ctx, wsbh, dst, dst); ++ emit(ctx, rotr, dst, dst, 16); ++ } else { ++ emit(ctx, sll, tmp, dst, 16); /* tmp = dst << 16 */ ++ emit(ctx, srl, dst, dst, 16); /* dst = dst >> 16 */ ++ emit(ctx, or, dst, dst, tmp); /* dst = dst | tmp */ ++ ++ emit(ctx, lui, msk, 0xff); /* msk = 0x00ff0000 */ ++ emit(ctx, ori, msk, msk, 0xff); /* msk = msk | 0xff */ ++ ++ emit(ctx, and, tmp, dst, msk); /* tmp = dst & msk */ ++ emit(ctx, sll, tmp, tmp, 8); /* tmp = tmp << 8 */ ++ emit(ctx, srl, dst, dst, 8); /* dst = dst >> 8 */ ++ emit(ctx, and, dst, dst, msk); /* dst = dst & msk */ ++ emit(ctx, or, dst, dst, tmp); /* reg = dst | tmp */ ++ } ++ break; ++ /* Swap bytes in a half word */ ++ case 16: ++ if (cpu_has_mips32r2 || cpu_has_mips32r6) { ++ emit(ctx, wsbh, dst, dst); ++ emit(ctx, andi, dst, dst, 0xffff); ++ } else { ++ emit(ctx, andi, tmp, dst, 0xff00); /* t = d & 0xff00 */ ++ emit(ctx, srl, tmp, tmp, 8); /* t = t >> 8 */ ++ emit(ctx, andi, dst, dst, 0x00ff); /* d = d & 0x00ff */ ++ emit(ctx, sll, dst, dst, 8); /* d = d << 8 */ ++ emit(ctx, or, dst, dst, tmp); /* d = d | t */ ++ } ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Validate jump immediate range */ ++bool valid_jmp_i(u8 op, s32 imm) ++{ ++ switch (op) { ++ case JIT_JNOP: ++ /* Immediate value not used */ ++ return true; ++ case BPF_JEQ: ++ case BPF_JNE: ++ /* No immediate operation */ ++ return false; ++ case BPF_JSET: ++ case JIT_JNSET: ++ /* imm must be 16 bits unsigned */ ++ return imm >= 0 && imm <= 0xffff; ++ case BPF_JGE: ++ case BPF_JLT: ++ case BPF_JSGE: ++ case BPF_JSLT: ++ /* imm must be 16 bits */ ++ return imm >= -0x8000 && imm <= 0x7fff; ++ case BPF_JGT: ++ case BPF_JLE: ++ case BPF_JSGT: ++ case BPF_JSLE: ++ /* imm + 1 must be 16 bits */ ++ return imm >= -0x8001 && imm <= 0x7ffe; ++ } ++ return false; ++} ++ ++/* Invert a conditional jump operation */ ++static u8 invert_jmp(u8 op) ++{ ++ switch (op) { ++ case BPF_JA: return JIT_JNOP; ++ case BPF_JEQ: return BPF_JNE; ++ case BPF_JNE: return BPF_JEQ; ++ case BPF_JSET: return JIT_JNSET; ++ case BPF_JGT: return BPF_JLE; ++ case BPF_JGE: return BPF_JLT; ++ case BPF_JLT: return BPF_JGE; ++ case BPF_JLE: return BPF_JGT; ++ case BPF_JSGT: return BPF_JSLE; ++ case BPF_JSGE: return BPF_JSLT; ++ case BPF_JSLT: return BPF_JSGE; ++ case BPF_JSLE: return BPF_JSGT; ++ } ++ return 0; ++} ++ ++/* Prepare a PC-relative jump operation */ ++static void setup_jmp(struct jit_context *ctx, u8 bpf_op, ++ s16 bpf_off, u8 *jit_op, s32 *jit_off) ++{ ++ u32 *descp = &ctx->descriptors[ctx->bpf_index]; ++ int op = bpf_op; ++ int offset = 0; ++ ++ /* Do not compute offsets on the first pass */ ++ if (INDEX(*descp) == 0) ++ goto done; ++ ++ /* Skip jumps never taken */ ++ if (bpf_op == JIT_JNOP) ++ goto done; ++ ++ /* Convert jumps always taken */ ++ if (bpf_op == BPF_JA) ++ *descp |= JIT_DESC_CONVERT; ++ ++ /* ++ * Current ctx->jit_index points to the start of the branch preamble. ++ * Since the preamble differs among different branch conditionals, ++ * the current index cannot be used to compute the branch offset. ++ * Instead, we use the offset table value for the next instruction, ++ * which gives the index immediately after the branch delay slot. ++ */ ++ if (!CONVERTED(*descp)) { ++ int target = ctx->bpf_index + bpf_off + 1; ++ int origin = ctx->bpf_index + 1; ++ ++ offset = (INDEX(ctx->descriptors[target]) - ++ INDEX(ctx->descriptors[origin]) + 1) * sizeof(u32); ++ } ++ ++ /* ++ * The PC-relative branch offset field on MIPS is 18 bits signed, ++ * so if the computed offset is larger than this we generate a an ++ * absolute jump that we skip with an inverted conditional branch. ++ */ ++ if (CONVERTED(*descp) || offset < -0x20000 || offset > 0x1ffff) { ++ offset = 3 * sizeof(u32); ++ op = invert_jmp(bpf_op); ++ ctx->changes += !CONVERTED(*descp); ++ *descp |= JIT_DESC_CONVERT; ++ } ++ ++done: ++ *jit_off = offset; ++ *jit_op = op; ++} ++ ++/* Prepare a PC-relative jump operation with immediate conditional */ ++void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width, ++ u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off) ++{ ++ bool always = false; ++ bool never = false; ++ ++ switch (bpf_op) { ++ case BPF_JEQ: ++ case BPF_JNE: ++ break; ++ case BPF_JSET: ++ case BPF_JLT: ++ never = imm == 0; ++ break; ++ case BPF_JGE: ++ always = imm == 0; ++ break; ++ case BPF_JGT: ++ never = (u32)imm == U32_MAX; ++ break; ++ case BPF_JLE: ++ always = (u32)imm == U32_MAX; ++ break; ++ case BPF_JSGT: ++ never = imm == S32_MAX && width == 32; ++ break; ++ case BPF_JSGE: ++ always = imm == S32_MIN && width == 32; ++ break; ++ case BPF_JSLT: ++ never = imm == S32_MIN && width == 32; ++ break; ++ case BPF_JSLE: ++ always = imm == S32_MAX && width == 32; ++ break; ++ } ++ ++ if (never) ++ bpf_op = JIT_JNOP; ++ if (always) ++ bpf_op = BPF_JA; ++ setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off); ++} ++ ++/* Prepare a PC-relative jump operation with register conditional */ ++void setup_jmp_r(struct jit_context *ctx, bool same_reg, ++ u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off) ++{ ++ switch (bpf_op) { ++ case BPF_JSET: ++ break; ++ case BPF_JEQ: ++ case BPF_JGE: ++ case BPF_JLE: ++ case BPF_JSGE: ++ case BPF_JSLE: ++ if (same_reg) ++ bpf_op = BPF_JA; ++ break; ++ case BPF_JNE: ++ case BPF_JLT: ++ case BPF_JGT: ++ case BPF_JSGT: ++ case BPF_JSLT: ++ if (same_reg) ++ bpf_op = JIT_JNOP; ++ break; ++ } ++ setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off); ++} ++ ++/* Finish a PC-relative jump operation */ ++int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off) ++{ ++ /* Emit conditional branch delay slot */ ++ if (jit_op != JIT_JNOP) ++ emit(ctx, nop); ++ /* ++ * Emit an absolute long jump with delay slot, ++ * if the PC-relative branch was converted. ++ */ ++ if (CONVERTED(ctx->descriptors[ctx->bpf_index])) { ++ int target = get_target(ctx, ctx->bpf_index + bpf_off + 1); ++ ++ if (target < 0) ++ return -1; ++ emit(ctx, j, target); ++ emit(ctx, nop); ++ } ++ return 0; ++} ++ ++/* Jump immediate (32-bit) */ ++void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op) ++{ ++ switch (op) { ++ /* No-op, used internally for branch optimization */ ++ case JIT_JNOP: ++ break; ++ /* PC += off if dst & imm */ ++ case BPF_JSET: ++ emit(ctx, andi, MIPS_R_T9, dst, (u16)imm); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ ++ case JIT_JNSET: ++ emit(ctx, andi, MIPS_R_T9, dst, (u16)imm); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst > imm */ ++ case BPF_JGT: ++ emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst >= imm */ ++ case BPF_JGE: ++ emit(ctx, sltiu, MIPS_R_T9, dst, imm); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst < imm */ ++ case BPF_JLT: ++ emit(ctx, sltiu, MIPS_R_T9, dst, imm); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst <= imm */ ++ case BPF_JLE: ++ emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst > imm (signed) */ ++ case BPF_JSGT: ++ emit(ctx, slti, MIPS_R_T9, dst, imm + 1); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst >= imm (signed) */ ++ case BPF_JSGE: ++ emit(ctx, slti, MIPS_R_T9, dst, imm); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst < imm (signed) */ ++ case BPF_JSLT: ++ emit(ctx, slti, MIPS_R_T9, dst, imm); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JSLE: ++ emit(ctx, slti, MIPS_R_T9, dst, imm + 1); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ } ++} ++ ++/* Jump register (32-bit) */ ++void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op) ++{ ++ switch (op) { ++ /* No-op, used internally for branch optimization */ ++ case JIT_JNOP: ++ break; ++ /* PC += off if dst == src */ ++ case BPF_JEQ: ++ emit(ctx, beq, dst, src, off); ++ break; ++ /* PC += off if dst != src */ ++ case BPF_JNE: ++ emit(ctx, bne, dst, src, off); ++ break; ++ /* PC += off if dst & src */ ++ case BPF_JSET: ++ emit(ctx, and, MIPS_R_T9, dst, src); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ ++ case JIT_JNSET: ++ emit(ctx, and, MIPS_R_T9, dst, src); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst > src */ ++ case BPF_JGT: ++ emit(ctx, sltu, MIPS_R_T9, src, dst); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst >= src */ ++ case BPF_JGE: ++ emit(ctx, sltu, MIPS_R_T9, dst, src); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst < src */ ++ case BPF_JLT: ++ emit(ctx, sltu, MIPS_R_T9, dst, src); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst <= src */ ++ case BPF_JLE: ++ emit(ctx, sltu, MIPS_R_T9, src, dst); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst > src (signed) */ ++ case BPF_JSGT: ++ emit(ctx, slt, MIPS_R_T9, src, dst); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst >= src (signed) */ ++ case BPF_JSGE: ++ emit(ctx, slt, MIPS_R_T9, dst, src); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst < src (signed) */ ++ case BPF_JSLT: ++ emit(ctx, slt, MIPS_R_T9, dst, src); ++ emit(ctx, bnez, MIPS_R_T9, off); ++ break; ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JSLE: ++ emit(ctx, slt, MIPS_R_T9, src, dst); ++ emit(ctx, beqz, MIPS_R_T9, off); ++ break; ++ } ++} ++ ++/* Jump always */ ++int emit_ja(struct jit_context *ctx, s16 off) ++{ ++ int target = get_target(ctx, ctx->bpf_index + off + 1); ++ ++ if (target < 0) ++ return -1; ++ emit(ctx, j, target); ++ emit(ctx, nop); ++ return 0; ++} ++ ++/* Jump to epilogue */ ++int emit_exit(struct jit_context *ctx) ++{ ++ int target = get_target(ctx, ctx->program->len); ++ ++ if (target < 0) ++ return -1; ++ emit(ctx, j, target); ++ emit(ctx, nop); ++ return 0; ++} ++ ++/* Build the program body from eBPF bytecode */ ++static int build_body(struct jit_context *ctx) ++{ ++ const struct bpf_prog *prog = ctx->program; ++ unsigned int i; ++ ++ ctx->stack_used = 0; ++ for (i = 0; i < prog->len; i++) { ++ const struct bpf_insn *insn = &prog->insnsi[i]; ++ u32 *descp = &ctx->descriptors[i]; ++ int ret; ++ ++ access_reg(ctx, insn->src_reg); ++ access_reg(ctx, insn->dst_reg); ++ ++ ctx->bpf_index = i; ++ if (ctx->target == NULL) { ++ ctx->changes += INDEX(*descp) != ctx->jit_index; ++ *descp &= JIT_DESC_CONVERT; ++ *descp |= ctx->jit_index; ++ } ++ ++ ret = build_insn(insn, ctx); ++ if (ret < 0) ++ return ret; ++ ++ if (ret > 0) { ++ i++; ++ if (ctx->target == NULL) ++ descp[1] = ctx->jit_index; ++ } ++ } ++ ++ /* Store the end offset, where the epilogue begins */ ++ ctx->descriptors[prog->len] = ctx->jit_index; ++ return 0; ++} ++ ++/* Set the branch conversion flag on all instructions */ ++static void set_convert_flag(struct jit_context *ctx, bool enable) ++{ ++ const struct bpf_prog *prog = ctx->program; ++ u32 flag = enable ? JIT_DESC_CONVERT : 0; ++ unsigned int i; ++ ++ for (i = 0; i <= prog->len; i++) ++ ctx->descriptors[i] = INDEX(ctx->descriptors[i]) | flag; ++} ++ ++static void jit_fill_hole(void *area, unsigned int size) ++{ ++ u32 *p; ++ ++ /* We are guaranteed to have aligned memory. */ ++ for (p = area; size >= sizeof(u32); size -= sizeof(u32)) ++ uasm_i_break(&p, BRK_BUG); /* Increments p */ ++} ++ ++bool bpf_jit_needs_zext(void) ++{ ++ return true; ++} ++ ++struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) ++{ ++ struct bpf_prog *tmp, *orig_prog = prog; ++ struct bpf_binary_header *header = NULL; ++ struct jit_context ctx; ++ bool tmp_blinded = false; ++ unsigned int tmp_idx; ++ unsigned int image_size; ++ u8 *image_ptr; ++ int tries; ++ ++ /* ++ * If BPF JIT was not enabled then we must fall back to ++ * the interpreter. ++ */ ++ if (!prog->jit_requested) ++ return orig_prog; ++ /* ++ * If constant blinding was enabled and we failed during blinding ++ * then we must fall back to the interpreter. Otherwise, we save ++ * the new JITed code. ++ */ ++ tmp = bpf_jit_blind_constants(prog); ++ if (IS_ERR(tmp)) ++ return orig_prog; ++ if (tmp != prog) { ++ tmp_blinded = true; ++ prog = tmp; ++ } ++ ++ memset(&ctx, 0, sizeof(ctx)); ++ ctx.program = prog; ++ ++ /* ++ * Not able to allocate memory for descriptors[], then ++ * we must fall back to the interpreter ++ */ ++ ctx.descriptors = kcalloc(prog->len + 1, sizeof(*ctx.descriptors), ++ GFP_KERNEL); ++ if (ctx.descriptors == NULL) ++ goto out_err; ++ ++ /* First pass discovers used resources */ ++ if (build_body(&ctx) < 0) ++ goto out_err; ++ /* ++ * Second pass computes instruction offsets. ++ * If any PC-relative branches are out of range, a sequence of ++ * a PC-relative branch + a jump is generated, and we have to ++ * try again from the beginning to generate the new offsets. ++ * This is done until no additional conversions are necessary. ++ * The last two iterations are done with all branches being ++ * converted, to guarantee offset table convergence within a ++ * fixed number of iterations. ++ */ ++ ctx.jit_index = 0; ++ build_prologue(&ctx); ++ tmp_idx = ctx.jit_index; ++ ++ tries = JIT_MAX_ITERATIONS; ++ do { ++ ctx.jit_index = tmp_idx; ++ ctx.changes = 0; ++ if (tries == 2) ++ set_convert_flag(&ctx, true); ++ if (build_body(&ctx) < 0) ++ goto out_err; ++ } while (ctx.changes > 0 && --tries > 0); ++ ++ if (WARN_ONCE(ctx.changes > 0, "JIT offsets failed to converge")) ++ goto out_err; ++ ++ build_epilogue(&ctx, MIPS_R_RA); ++ ++ /* Now we know the size of the structure to make */ ++ image_size = sizeof(u32) * ctx.jit_index; ++ header = bpf_jit_binary_alloc(image_size, &image_ptr, ++ sizeof(u32), jit_fill_hole); ++ /* ++ * Not able to allocate memory for the structure then ++ * we must fall back to the interpretation ++ */ ++ if (header == NULL) ++ goto out_err; ++ ++ /* Actual pass to generate final JIT code */ ++ ctx.target = (u32 *)image_ptr; ++ ctx.jit_index = 0; ++ ++ /* ++ * If building the JITed code fails somehow, ++ * we fall back to the interpretation. ++ */ ++ build_prologue(&ctx); ++ if (build_body(&ctx) < 0) ++ goto out_err; ++ build_epilogue(&ctx, MIPS_R_RA); ++ ++ /* Populate line info meta data */ ++ set_convert_flag(&ctx, false); ++ bpf_prog_fill_jited_linfo(prog, &ctx.descriptors[1]); ++ ++ /* Set as read-only exec and flush instruction cache */ ++ bpf_jit_binary_lock_ro(header); ++ flush_icache_range((unsigned long)header, ++ (unsigned long)&ctx.target[ctx.jit_index]); ++ ++ if (bpf_jit_enable > 1) ++ bpf_jit_dump(prog->len, image_size, 2, ctx.target); ++ ++ prog->bpf_func = (void *)ctx.target; ++ prog->jited = 1; ++ prog->jited_len = image_size; ++ ++out: ++ if (tmp_blinded) ++ bpf_jit_prog_release_other(prog, prog == orig_prog ? ++ tmp : orig_prog); ++ kfree(ctx.descriptors); ++ return prog; ++ ++out_err: ++ prog = orig_prog; ++ if (header) ++ bpf_jit_binary_free(header); ++ goto out; ++} +--- /dev/null ++++ b/arch/mips/net/bpf_jit_comp.h +@@ -0,0 +1,211 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++/* ++ * Just-In-Time compiler for eBPF bytecode on 32-bit and 64-bit MIPS. ++ * ++ * Copyright (c) 2021 Anyfi Networks AB. ++ * Author: Johan Almbladh ++ * ++ * Based on code and ideas from ++ * Copyright (c) 2017 Cavium, Inc. ++ * Copyright (c) 2017 Shubham Bansal ++ * Copyright (c) 2011 Mircea Gherzan ++ */ ++ ++#ifndef _BPF_JIT_COMP_H ++#define _BPF_JIT_COMP_H ++ ++/* MIPS registers */ ++#define MIPS_R_ZERO 0 /* Const zero */ ++#define MIPS_R_AT 1 /* Asm temp */ ++#define MIPS_R_V0 2 /* Result */ ++#define MIPS_R_V1 3 /* Result */ ++#define MIPS_R_A0 4 /* Argument */ ++#define MIPS_R_A1 5 /* Argument */ ++#define MIPS_R_A2 6 /* Argument */ ++#define MIPS_R_A3 7 /* Argument */ ++#define MIPS_R_A4 8 /* Arg (n64) */ ++#define MIPS_R_A5 9 /* Arg (n64) */ ++#define MIPS_R_A6 10 /* Arg (n64) */ ++#define MIPS_R_A7 11 /* Arg (n64) */ ++#define MIPS_R_T0 8 /* Temp (o32) */ ++#define MIPS_R_T1 9 /* Temp (o32) */ ++#define MIPS_R_T2 10 /* Temp (o32) */ ++#define MIPS_R_T3 11 /* Temp (o32) */ ++#define MIPS_R_T4 12 /* Temporary */ ++#define MIPS_R_T5 13 /* Temporary */ ++#define MIPS_R_T6 14 /* Temporary */ ++#define MIPS_R_T7 15 /* Temporary */ ++#define MIPS_R_S0 16 /* Saved */ ++#define MIPS_R_S1 17 /* Saved */ ++#define MIPS_R_S2 18 /* Saved */ ++#define MIPS_R_S3 19 /* Saved */ ++#define MIPS_R_S4 20 /* Saved */ ++#define MIPS_R_S5 21 /* Saved */ ++#define MIPS_R_S6 22 /* Saved */ ++#define MIPS_R_S7 23 /* Saved */ ++#define MIPS_R_T8 24 /* Temporary */ ++#define MIPS_R_T9 25 /* Temporary */ ++/* MIPS_R_K0 26 Reserved */ ++/* MIPS_R_K1 27 Reserved */ ++#define MIPS_R_GP 28 /* Global ptr */ ++#define MIPS_R_SP 29 /* Stack ptr */ ++#define MIPS_R_FP 30 /* Frame ptr */ ++#define MIPS_R_RA 31 /* Return */ ++ ++/* ++ * Jump address mask for immediate jumps. The four most significant bits ++ * must be equal to PC. ++ */ ++#define MIPS_JMP_MASK 0x0fffffffUL ++ ++/* Maximum number of iterations in offset table computation */ ++#define JIT_MAX_ITERATIONS 8 ++ ++/* ++ * Jump pseudo-instructions used internally ++ * for branch conversion and branch optimization. ++ */ ++#define JIT_JNSET 0xe0 ++#define JIT_JNOP 0xf0 ++ ++/* Descriptor flag for PC-relative branch conversion */ ++#define JIT_DESC_CONVERT BIT(31) ++ ++/* JIT context for an eBPF program */ ++struct jit_context { ++ struct bpf_prog *program; /* The eBPF program being JITed */ ++ u32 *descriptors; /* eBPF to JITed CPU insn descriptors */ ++ u32 *target; /* JITed code buffer */ ++ u32 bpf_index; /* Index of current BPF program insn */ ++ u32 jit_index; /* Index of current JIT target insn */ ++ u32 changes; /* Number of PC-relative branch conv */ ++ u32 accessed; /* Bit mask of read eBPF registers */ ++ u32 clobbered; /* Bit mask of modified CPU registers */ ++ u32 stack_size; /* Total allocated stack size in bytes */ ++ u32 saved_size; /* Size of callee-saved registers */ ++ u32 stack_used; /* Stack size used for function calls */ ++}; ++ ++/* Emit the instruction if the JIT memory space has been allocated */ ++#define emit(ctx, func, ...) \ ++do { \ ++ if ((ctx)->target != NULL) { \ ++ u32 *p = &(ctx)->target[ctx->jit_index]; \ ++ uasm_i_##func(&p, ##__VA_ARGS__); \ ++ } \ ++ (ctx)->jit_index++; \ ++} while (0) ++ ++/* ++ * Mark a BPF register as accessed, it needs to be ++ * initialized by the program if expected, e.g. FP. ++ */ ++static inline void access_reg(struct jit_context *ctx, u8 reg) ++{ ++ ctx->accessed |= BIT(reg); ++} ++ ++/* ++ * Mark a CPU register as clobbered, it needs to be ++ * saved/restored by the program if callee-saved. ++ */ ++static inline void clobber_reg(struct jit_context *ctx, u8 reg) ++{ ++ ctx->clobbered |= BIT(reg); ++} ++ ++/* ++ * Push registers on the stack, starting at a given depth from the stack ++ * pointer and increasing. The next depth to be written is returned. ++ */ ++int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth); ++ ++/* ++ * Pop registers from the stack, starting at a given depth from the stack ++ * pointer and increasing. The next depth to be read is returned. ++ */ ++int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth); ++ ++/* Compute the 28-bit jump target address from a BPF program location */ ++int get_target(struct jit_context *ctx, u32 loc); ++ ++/* Compute the PC-relative offset to relative BPF program offset */ ++int get_offset(const struct jit_context *ctx, int off); ++ ++/* dst = imm (32-bit) */ ++void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm); ++ ++/* dst = src (32-bit) */ ++void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src); ++ ++/* Validate ALU/ALU64 immediate range */ ++bool valid_alu_i(u8 op, s32 imm); ++ ++/* Rewrite ALU/ALU64 immediate operation */ ++bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val); ++ ++/* ALU immediate operation (32-bit) */ ++void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op); ++ ++/* ALU register operation (32-bit) */ ++void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op); ++ ++/* Atomic read-modify-write (32-bit) */ ++void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code); ++ ++/* Atomic compare-and-exchange (32-bit) */ ++void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off); ++ ++/* Swap bytes and truncate a register word or half word */ ++void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width); ++ ++/* Validate JMP/JMP32 immediate range */ ++bool valid_jmp_i(u8 op, s32 imm); ++ ++/* Prepare a PC-relative jump operation with immediate conditional */ ++void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width, ++ u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off); ++ ++/* Prepare a PC-relative jump operation with register conditional */ ++void setup_jmp_r(struct jit_context *ctx, bool same_reg, ++ u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off); ++ ++/* Finish a PC-relative jump operation */ ++int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off); ++ ++/* Conditional JMP/JMP32 immediate */ ++void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op); ++ ++/* Conditional JMP/JMP32 register */ ++void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op); ++ ++/* Jump always */ ++int emit_ja(struct jit_context *ctx, s16 off); ++ ++/* Jump to epilogue */ ++int emit_exit(struct jit_context *ctx); ++ ++/* ++ * Build program prologue to set up the stack and registers. ++ * This function is implemented separately for 32-bit and 64-bit JITs. ++ */ ++void build_prologue(struct jit_context *ctx); ++ ++/* ++ * Build the program epilogue to restore the stack and registers. ++ * This function is implemented separately for 32-bit and 64-bit JITs. ++ */ ++void build_epilogue(struct jit_context *ctx, int dest_reg); ++ ++/* ++ * Convert an eBPF instruction to native instruction, i.e ++ * JITs an eBPF instruction. ++ * Returns : ++ * 0 - Successfully JITed an 8-byte eBPF instruction ++ * >0 - Successfully JITed a 16-byte eBPF instruction ++ * <0 - Failed to JIT. ++ * This function is implemented separately for 32-bit and 64-bit JITs. ++ */ ++int build_insn(const struct bpf_insn *insn, struct jit_context *ctx); ++ ++#endif /* _BPF_JIT_COMP_H */ +--- /dev/null ++++ b/arch/mips/net/bpf_jit_comp32.c +@@ -0,0 +1,1741 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Just-In-Time compiler for eBPF bytecode on MIPS. ++ * Implementation of JIT functions for 32-bit CPUs. ++ * ++ * Copyright (c) 2021 Anyfi Networks AB. ++ * Author: Johan Almbladh ++ * ++ * Based on code and ideas from ++ * Copyright (c) 2017 Cavium, Inc. ++ * Copyright (c) 2017 Shubham Bansal ++ * Copyright (c) 2011 Mircea Gherzan ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bpf_jit_comp.h" ++ ++/* MIPS a4-a7 are not available in the o32 ABI */ ++#undef MIPS_R_A4 ++#undef MIPS_R_A5 ++#undef MIPS_R_A6 ++#undef MIPS_R_A7 ++ ++/* Stack is 8-byte aligned in o32 ABI */ ++#define MIPS_STACK_ALIGNMENT 8 ++ ++/* ++ * The top 16 bytes of a stack frame is reserved for the callee in O32 ABI. ++ * This corresponds to stack space for register arguments a0-a3. ++ */ ++#define JIT_RESERVED_STACK 16 ++ ++/* Temporary 64-bit register used by JIT */ ++#define JIT_REG_TMP MAX_BPF_JIT_REG ++ ++/* ++ * Number of prologue bytes to skip when doing a tail call. ++ * Tail call count (TCC) initialization (8 bytes) always, plus ++ * R0-to-v0 assignment (4 bytes) if big endian. ++ */ ++#ifdef __BIG_ENDIAN ++#define JIT_TCALL_SKIP 12 ++#else ++#define JIT_TCALL_SKIP 8 ++#endif ++ ++/* CPU registers holding the callee return value */ ++#define JIT_RETURN_REGS \ ++ (BIT(MIPS_R_V0) | \ ++ BIT(MIPS_R_V1)) ++ ++/* CPU registers arguments passed to callee directly */ ++#define JIT_ARG_REGS \ ++ (BIT(MIPS_R_A0) | \ ++ BIT(MIPS_R_A1) | \ ++ BIT(MIPS_R_A2) | \ ++ BIT(MIPS_R_A3)) ++ ++/* CPU register arguments passed to callee on stack */ ++#define JIT_STACK_REGS \ ++ (BIT(MIPS_R_T0) | \ ++ BIT(MIPS_R_T1) | \ ++ BIT(MIPS_R_T2) | \ ++ BIT(MIPS_R_T3) | \ ++ BIT(MIPS_R_T4) | \ ++ BIT(MIPS_R_T5)) ++ ++/* Caller-saved CPU registers */ ++#define JIT_CALLER_REGS \ ++ (JIT_RETURN_REGS | \ ++ JIT_ARG_REGS | \ ++ JIT_STACK_REGS) ++ ++/* Callee-saved CPU registers */ ++#define JIT_CALLEE_REGS \ ++ (BIT(MIPS_R_S0) | \ ++ BIT(MIPS_R_S1) | \ ++ BIT(MIPS_R_S2) | \ ++ BIT(MIPS_R_S3) | \ ++ BIT(MIPS_R_S4) | \ ++ BIT(MIPS_R_S5) | \ ++ BIT(MIPS_R_S6) | \ ++ BIT(MIPS_R_S7) | \ ++ BIT(MIPS_R_GP) | \ ++ BIT(MIPS_R_FP) | \ ++ BIT(MIPS_R_RA)) ++ ++/* ++ * Mapping of 64-bit eBPF registers to 32-bit native MIPS registers. ++ * ++ * 1) Native register pairs are ordered according to CPU endiannes, following ++ * the MIPS convention for passing 64-bit arguments and return values. ++ * 2) The eBPF return value, arguments and callee-saved registers are mapped ++ * to their native MIPS equivalents. ++ * 3) Since the 32 highest bits in the eBPF FP register are always zero, ++ * only one general-purpose register is actually needed for the mapping. ++ * We use the fp register for this purpose, and map the highest bits to ++ * the MIPS register r0 (zero). ++ * 4) We use the MIPS gp and at registers as internal temporary registers ++ * for constant blinding. The gp register is callee-saved. ++ * 5) One 64-bit temporary register is mapped for use when sign-extending ++ * immediate operands. MIPS registers t6-t9 are available to the JIT ++ * for as temporaries when implementing complex 64-bit operations. ++ * ++ * With this scheme all eBPF registers are being mapped to native MIPS ++ * registers without having to use any stack scratch space. The direct ++ * register mapping (2) simplifies the handling of function calls. ++ */ ++static const u8 bpf2mips32[][2] = { ++ /* Return value from in-kernel function, and exit value from eBPF */ ++ [BPF_REG_0] = {MIPS_R_V1, MIPS_R_V0}, ++ /* Arguments from eBPF program to in-kernel function */ ++ [BPF_REG_1] = {MIPS_R_A1, MIPS_R_A0}, ++ [BPF_REG_2] = {MIPS_R_A3, MIPS_R_A2}, ++ /* Remaining arguments, to be passed on the stack per O32 ABI */ ++ [BPF_REG_3] = {MIPS_R_T1, MIPS_R_T0}, ++ [BPF_REG_4] = {MIPS_R_T3, MIPS_R_T2}, ++ [BPF_REG_5] = {MIPS_R_T5, MIPS_R_T4}, ++ /* Callee-saved registers that in-kernel function will preserve */ ++ [BPF_REG_6] = {MIPS_R_S1, MIPS_R_S0}, ++ [BPF_REG_7] = {MIPS_R_S3, MIPS_R_S2}, ++ [BPF_REG_8] = {MIPS_R_S5, MIPS_R_S4}, ++ [BPF_REG_9] = {MIPS_R_S7, MIPS_R_S6}, ++ /* Read-only frame pointer to access the eBPF stack */ ++#ifdef __BIG_ENDIAN ++ [BPF_REG_FP] = {MIPS_R_FP, MIPS_R_ZERO}, ++#else ++ [BPF_REG_FP] = {MIPS_R_ZERO, MIPS_R_FP}, ++#endif ++ /* Temporary register for blinding constants */ ++ [BPF_REG_AX] = {MIPS_R_GP, MIPS_R_AT}, ++ /* Temporary register for internal JIT use */ ++ [JIT_REG_TMP] = {MIPS_R_T7, MIPS_R_T6}, ++}; ++ ++/* Get low CPU register for a 64-bit eBPF register mapping */ ++static inline u8 lo(const u8 reg[]) ++{ ++#ifdef __BIG_ENDIAN ++ return reg[0]; ++#else ++ return reg[1]; ++#endif ++} ++ ++/* Get high CPU register for a 64-bit eBPF register mapping */ ++static inline u8 hi(const u8 reg[]) ++{ ++#ifdef __BIG_ENDIAN ++ return reg[1]; ++#else ++ return reg[0]; ++#endif ++} ++ ++/* ++ * Mark a 64-bit CPU register pair as clobbered, it needs to be ++ * saved/restored by the program if callee-saved. ++ */ ++static void clobber_reg64(struct jit_context *ctx, const u8 reg[]) ++{ ++ clobber_reg(ctx, reg[0]); ++ clobber_reg(ctx, reg[1]); ++} ++ ++/* dst = imm (sign-extended) */ ++static void emit_mov_se_i64(struct jit_context *ctx, const u8 dst[], s32 imm) ++{ ++ emit_mov_i(ctx, lo(dst), imm); ++ if (imm < 0) ++ emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1); ++ else ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ clobber_reg64(ctx, dst); ++} ++ ++/* Zero extension, if verifier does not do it for us */ ++static void emit_zext_ver(struct jit_context *ctx, const u8 dst[]) ++{ ++ if (!ctx->program->aux->verifier_zext) { ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ clobber_reg(ctx, hi(dst)); ++ } ++} ++ ++/* Load delay slot, if ISA mandates it */ ++static void emit_load_delay(struct jit_context *ctx) ++{ ++ if (!cpu_has_mips_2_3_4_5_r) ++ emit(ctx, nop); ++} ++ ++/* ALU immediate operation (64-bit) */ ++static void emit_alu_i64(struct jit_context *ctx, ++ const u8 dst[], s32 imm, u8 op) ++{ ++ u8 src = MIPS_R_T6; ++ ++ /* ++ * ADD/SUB with all but the max negative imm can be handled by ++ * inverting the operation and the imm value, saving one insn. ++ */ ++ if (imm > S32_MIN && imm < 0) ++ switch (op) { ++ case BPF_ADD: ++ op = BPF_SUB; ++ imm = -imm; ++ break; ++ case BPF_SUB: ++ op = BPF_ADD; ++ imm = -imm; ++ break; ++ } ++ ++ /* Move immediate to temporary register */ ++ emit_mov_i(ctx, src, imm); ++ ++ switch (op) { ++ /* dst = dst + imm */ ++ case BPF_ADD: ++ emit(ctx, addu, lo(dst), lo(dst), src); ++ emit(ctx, sltu, MIPS_R_T9, lo(dst), src); ++ emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9); ++ if (imm < 0) ++ emit(ctx, addiu, hi(dst), hi(dst), -1); ++ break; ++ /* dst = dst - imm */ ++ case BPF_SUB: ++ emit(ctx, sltu, MIPS_R_T9, lo(dst), src); ++ emit(ctx, subu, lo(dst), lo(dst), src); ++ emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9); ++ if (imm < 0) ++ emit(ctx, addiu, hi(dst), hi(dst), 1); ++ break; ++ /* dst = dst | imm */ ++ case BPF_OR: ++ emit(ctx, or, lo(dst), lo(dst), src); ++ if (imm < 0) ++ emit(ctx, addiu, hi(dst), MIPS_R_ZERO, -1); ++ break; ++ /* dst = dst & imm */ ++ case BPF_AND: ++ emit(ctx, and, lo(dst), lo(dst), src); ++ if (imm >= 0) ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ break; ++ /* dst = dst ^ imm */ ++ case BPF_XOR: ++ emit(ctx, xor, lo(dst), lo(dst), src); ++ if (imm < 0) { ++ emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst)); ++ emit(ctx, addiu, hi(dst), hi(dst), -1); ++ } ++ break; ++ } ++ clobber_reg64(ctx, dst); ++} ++ ++/* ALU register operation (64-bit) */ ++static void emit_alu_r64(struct jit_context *ctx, ++ const u8 dst[], const u8 src[], u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = dst + src */ ++ case BPF_ADD: ++ if (src == dst) { ++ emit(ctx, srl, MIPS_R_T9, lo(dst), 31); ++ emit(ctx, addu, lo(dst), lo(dst), lo(dst)); ++ } else { ++ emit(ctx, addu, lo(dst), lo(dst), lo(src)); ++ emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src)); ++ } ++ emit(ctx, addu, hi(dst), hi(dst), hi(src)); ++ emit(ctx, addu, hi(dst), hi(dst), MIPS_R_T9); ++ break; ++ /* dst = dst - src */ ++ case BPF_SUB: ++ emit(ctx, sltu, MIPS_R_T9, lo(dst), lo(src)); ++ emit(ctx, subu, lo(dst), lo(dst), lo(src)); ++ emit(ctx, subu, hi(dst), hi(dst), hi(src)); ++ emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9); ++ break; ++ /* dst = dst | src */ ++ case BPF_OR: ++ emit(ctx, or, lo(dst), lo(dst), lo(src)); ++ emit(ctx, or, hi(dst), hi(dst), hi(src)); ++ break; ++ /* dst = dst & src */ ++ case BPF_AND: ++ emit(ctx, and, lo(dst), lo(dst), lo(src)); ++ emit(ctx, and, hi(dst), hi(dst), hi(src)); ++ break; ++ /* dst = dst ^ src */ ++ case BPF_XOR: ++ emit(ctx, xor, lo(dst), lo(dst), lo(src)); ++ emit(ctx, xor, hi(dst), hi(dst), hi(src)); ++ break; ++ } ++ clobber_reg64(ctx, dst); ++} ++ ++/* ALU invert (64-bit) */ ++static void emit_neg_i64(struct jit_context *ctx, const u8 dst[]) ++{ ++ emit(ctx, sltu, MIPS_R_T9, MIPS_R_ZERO, lo(dst)); ++ emit(ctx, subu, lo(dst), MIPS_R_ZERO, lo(dst)); ++ emit(ctx, subu, hi(dst), MIPS_R_ZERO, hi(dst)); ++ emit(ctx, subu, hi(dst), hi(dst), MIPS_R_T9); ++ ++ clobber_reg64(ctx, dst); ++} ++ ++/* ALU shift immediate (64-bit) */ ++static void emit_shift_i64(struct jit_context *ctx, ++ const u8 dst[], u32 imm, u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = dst << imm */ ++ case BPF_LSH: ++ if (imm < 32) { ++ emit(ctx, srl, MIPS_R_T9, lo(dst), 32 - imm); ++ emit(ctx, sll, lo(dst), lo(dst), imm); ++ emit(ctx, sll, hi(dst), hi(dst), imm); ++ emit(ctx, or, hi(dst), hi(dst), MIPS_R_T9); ++ } else { ++ emit(ctx, sll, hi(dst), lo(dst), imm - 32); ++ emit(ctx, move, lo(dst), MIPS_R_ZERO); ++ } ++ break; ++ /* dst = dst >> imm */ ++ case BPF_RSH: ++ if (imm < 32) { ++ emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm); ++ emit(ctx, srl, lo(dst), lo(dst), imm); ++ emit(ctx, srl, hi(dst), hi(dst), imm); ++ emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9); ++ } else { ++ emit(ctx, srl, lo(dst), hi(dst), imm - 32); ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ } ++ break; ++ /* dst = dst >> imm (arithmetic) */ ++ case BPF_ARSH: ++ if (imm < 32) { ++ emit(ctx, sll, MIPS_R_T9, hi(dst), 32 - imm); ++ emit(ctx, srl, lo(dst), lo(dst), imm); ++ emit(ctx, sra, hi(dst), hi(dst), imm); ++ emit(ctx, or, lo(dst), lo(dst), MIPS_R_T9); ++ } else { ++ emit(ctx, sra, lo(dst), hi(dst), imm - 32); ++ emit(ctx, sra, hi(dst), hi(dst), 31); ++ } ++ break; ++ } ++ clobber_reg64(ctx, dst); ++} ++ ++/* ALU shift register (64-bit) */ ++static void emit_shift_r64(struct jit_context *ctx, ++ const u8 dst[], u8 src, u8 op) ++{ ++ u8 t1 = MIPS_R_T8; ++ u8 t2 = MIPS_R_T9; ++ ++ emit(ctx, andi, t1, src, 32); /* t1 = src & 32 */ ++ emit(ctx, beqz, t1, 16); /* PC += 16 if t1 == 0 */ ++ emit(ctx, nor, t2, src, MIPS_R_ZERO); /* t2 = ~src (delay slot) */ ++ ++ switch (BPF_OP(op)) { ++ /* dst = dst << src */ ++ case BPF_LSH: ++ /* Next: shift >= 32 */ ++ emit(ctx, sllv, hi(dst), lo(dst), src); /* dh = dl << src */ ++ emit(ctx, move, lo(dst), MIPS_R_ZERO); /* dl = 0 */ ++ emit(ctx, b, 20); /* PC += 20 */ ++ /* +16: shift < 32 */ ++ emit(ctx, srl, t1, lo(dst), 1); /* t1 = dl >> 1 */ ++ emit(ctx, srlv, t1, t1, t2); /* t1 = t1 >> t2 */ ++ emit(ctx, sllv, lo(dst), lo(dst), src); /* dl = dl << src */ ++ emit(ctx, sllv, hi(dst), hi(dst), src); /* dh = dh << src */ ++ emit(ctx, or, hi(dst), hi(dst), t1); /* dh = dh | t1 */ ++ break; ++ /* dst = dst >> src */ ++ case BPF_RSH: ++ /* Next: shift >= 32 */ ++ emit(ctx, srlv, lo(dst), hi(dst), src); /* dl = dh >> src */ ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); /* dh = 0 */ ++ emit(ctx, b, 20); /* PC += 20 */ ++ /* +16: shift < 32 */ ++ emit(ctx, sll, t1, hi(dst), 1); /* t1 = dl << 1 */ ++ emit(ctx, sllv, t1, t1, t2); /* t1 = t1 << t2 */ ++ emit(ctx, srlv, lo(dst), lo(dst), src); /* dl = dl >> src */ ++ emit(ctx, srlv, hi(dst), hi(dst), src); /* dh = dh >> src */ ++ emit(ctx, or, lo(dst), lo(dst), t1); /* dl = dl | t1 */ ++ break; ++ /* dst = dst >> src (arithmetic) */ ++ case BPF_ARSH: ++ /* Next: shift >= 32 */ ++ emit(ctx, srav, lo(dst), hi(dst), src); /* dl = dh >>a src */ ++ emit(ctx, sra, hi(dst), hi(dst), 31); /* dh = dh >>a 31 */ ++ emit(ctx, b, 20); /* PC += 20 */ ++ /* +16: shift < 32 */ ++ emit(ctx, sll, t1, hi(dst), 1); /* t1 = dl << 1 */ ++ emit(ctx, sllv, t1, t1, t2); /* t1 = t1 << t2 */ ++ emit(ctx, srlv, lo(dst), lo(dst), src); /* dl = dl >>a src */ ++ emit(ctx, srav, hi(dst), hi(dst), src); /* dh = dh >> src */ ++ emit(ctx, or, lo(dst), lo(dst), t1); /* dl = dl | t1 */ ++ break; ++ } ++ ++ /* +20: Done */ ++ clobber_reg64(ctx, dst); ++} ++ ++/* ALU mul immediate (64x32-bit) */ ++static void emit_mul_i64(struct jit_context *ctx, const u8 dst[], s32 imm) ++{ ++ u8 src = MIPS_R_T6; ++ u8 tmp = MIPS_R_T9; ++ ++ switch (imm) { ++ /* dst = dst * 1 is a no-op */ ++ case 1: ++ break; ++ /* dst = dst * -1 */ ++ case -1: ++ emit_neg_i64(ctx, dst); ++ break; ++ case 0: ++ emit_mov_r(ctx, lo(dst), MIPS_R_ZERO); ++ emit_mov_r(ctx, hi(dst), MIPS_R_ZERO); ++ break; ++ /* Full 64x32 multiply */ ++ default: ++ /* hi(dst) = hi(dst) * src(imm) */ ++ emit_mov_i(ctx, src, imm); ++ if (cpu_has_mips32r1 || cpu_has_mips32r6) { ++ emit(ctx, mul, hi(dst), hi(dst), src); ++ } else { ++ emit(ctx, multu, hi(dst), src); ++ emit(ctx, mflo, hi(dst)); ++ } ++ ++ /* hi(dst) = hi(dst) - lo(dst) */ ++ if (imm < 0) ++ emit(ctx, subu, hi(dst), hi(dst), lo(dst)); ++ ++ /* tmp = lo(dst) * src(imm) >> 32 */ ++ /* lo(dst) = lo(dst) * src(imm) */ ++ if (cpu_has_mips32r6) { ++ emit(ctx, muhu, tmp, lo(dst), src); ++ emit(ctx, mulu, lo(dst), lo(dst), src); ++ } else { ++ emit(ctx, multu, lo(dst), src); ++ emit(ctx, mflo, lo(dst)); ++ emit(ctx, mfhi, tmp); ++ } ++ ++ /* hi(dst) += tmp */ ++ emit(ctx, addu, hi(dst), hi(dst), tmp); ++ clobber_reg64(ctx, dst); ++ break; ++ } ++} ++ ++/* ALU mul register (64x64-bit) */ ++static void emit_mul_r64(struct jit_context *ctx, ++ const u8 dst[], const u8 src[]) ++{ ++ u8 acc = MIPS_R_T8; ++ u8 tmp = MIPS_R_T9; ++ ++ /* acc = hi(dst) * lo(src) */ ++ if (cpu_has_mips32r1 || cpu_has_mips32r6) { ++ emit(ctx, mul, acc, hi(dst), lo(src)); ++ } else { ++ emit(ctx, multu, hi(dst), lo(src)); ++ emit(ctx, mflo, acc); ++ } ++ ++ /* tmp = lo(dst) * hi(src) */ ++ if (cpu_has_mips32r1 || cpu_has_mips32r6) { ++ emit(ctx, mul, tmp, lo(dst), hi(src)); ++ } else { ++ emit(ctx, multu, lo(dst), hi(src)); ++ emit(ctx, mflo, tmp); ++ } ++ ++ /* acc += tmp */ ++ emit(ctx, addu, acc, acc, tmp); ++ ++ /* tmp = lo(dst) * lo(src) >> 32 */ ++ /* lo(dst) = lo(dst) * lo(src) */ ++ if (cpu_has_mips32r6) { ++ emit(ctx, muhu, tmp, lo(dst), lo(src)); ++ emit(ctx, mulu, lo(dst), lo(dst), lo(src)); ++ } else { ++ emit(ctx, multu, lo(dst), lo(src)); ++ emit(ctx, mflo, lo(dst)); ++ emit(ctx, mfhi, tmp); ++ } ++ ++ /* hi(dst) = acc + tmp */ ++ emit(ctx, addu, hi(dst), acc, tmp); ++ clobber_reg64(ctx, dst); ++} ++ ++/* Helper function for 64-bit modulo */ ++static u64 jit_mod64(u64 a, u64 b) ++{ ++ u64 rem; ++ ++ div64_u64_rem(a, b, &rem); ++ return rem; ++} ++ ++/* ALU div/mod register (64-bit) */ ++static void emit_divmod_r64(struct jit_context *ctx, ++ const u8 dst[], const u8 src[], u8 op) ++{ ++ const u8 *r0 = bpf2mips32[BPF_REG_0]; /* Mapped to v0-v1 */ ++ const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */ ++ const u8 *r2 = bpf2mips32[BPF_REG_2]; /* Mapped to a2-a3 */ ++ int exclude, k; ++ u32 addr = 0; ++ ++ /* Push caller-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ 0, JIT_RESERVED_STACK); ++ ++ /* Put 64-bit arguments 1 and 2 in registers a0-a3 */ ++ for (k = 0; k < 2; k++) { ++ emit(ctx, move, MIPS_R_T9, src[k]); ++ emit(ctx, move, r1[k], dst[k]); ++ emit(ctx, move, r2[k], MIPS_R_T9); ++ } ++ ++ /* Emit function call */ ++ switch (BPF_OP(op)) { ++ /* dst = dst / src */ ++ case BPF_DIV: ++ addr = (u32)&div64_u64; ++ break; ++ /* dst = dst % src */ ++ case BPF_MOD: ++ addr = (u32)&jit_mod64; ++ break; ++ } ++ emit_mov_i(ctx, MIPS_R_T9, addr); ++ emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9); ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* Store the 64-bit result in dst */ ++ emit(ctx, move, dst[0], r0[0]); ++ emit(ctx, move, dst[1], r0[1]); ++ ++ /* Restore caller-saved registers, excluding the computed result */ ++ exclude = BIT(lo(dst)) | BIT(hi(dst)); ++ pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ exclude, JIT_RESERVED_STACK); ++ emit_load_delay(ctx); ++ ++ clobber_reg64(ctx, dst); ++ clobber_reg(ctx, MIPS_R_V0); ++ clobber_reg(ctx, MIPS_R_V1); ++ clobber_reg(ctx, MIPS_R_RA); ++} ++ ++/* Swap bytes in a register word */ ++static void emit_swap8_r(struct jit_context *ctx, u8 dst, u8 src, u8 mask) ++{ ++ u8 tmp = MIPS_R_T9; ++ ++ emit(ctx, and, tmp, src, mask); /* tmp = src & 0x00ff00ff */ ++ emit(ctx, sll, tmp, tmp, 8); /* tmp = tmp << 8 */ ++ emit(ctx, srl, dst, src, 8); /* dst = src >> 8 */ ++ emit(ctx, and, dst, dst, mask); /* dst = dst & 0x00ff00ff */ ++ emit(ctx, or, dst, dst, tmp); /* dst = dst | tmp */ ++} ++ ++/* Swap half words in a register word */ ++static void emit_swap16_r(struct jit_context *ctx, u8 dst, u8 src) ++{ ++ u8 tmp = MIPS_R_T9; ++ ++ emit(ctx, sll, tmp, src, 16); /* tmp = src << 16 */ ++ emit(ctx, srl, dst, src, 16); /* dst = src >> 16 */ ++ emit(ctx, or, dst, dst, tmp); /* dst = dst | tmp */ ++} ++ ++/* Swap bytes and truncate a register double word, word or half word */ ++static void emit_bswap_r64(struct jit_context *ctx, const u8 dst[], u32 width) ++{ ++ u8 tmp = MIPS_R_T8; ++ ++ switch (width) { ++ /* Swap bytes in a double word */ ++ case 64: ++ if (cpu_has_mips32r2 || cpu_has_mips32r6) { ++ emit(ctx, rotr, tmp, hi(dst), 16); ++ emit(ctx, rotr, hi(dst), lo(dst), 16); ++ emit(ctx, wsbh, lo(dst), tmp); ++ emit(ctx, wsbh, hi(dst), hi(dst)); ++ } else { ++ emit_swap16_r(ctx, tmp, lo(dst)); ++ emit_swap16_r(ctx, lo(dst), hi(dst)); ++ emit(ctx, move, hi(dst), tmp); ++ ++ emit(ctx, lui, tmp, 0xff); /* tmp = 0x00ff0000 */ ++ emit(ctx, ori, tmp, tmp, 0xff); /* tmp = 0x00ff00ff */ ++ emit_swap8_r(ctx, lo(dst), lo(dst), tmp); ++ emit_swap8_r(ctx, hi(dst), hi(dst), tmp); ++ } ++ break; ++ /* Swap bytes in a word */ ++ /* Swap bytes in a half word */ ++ case 32: ++ case 16: ++ emit_bswap_r(ctx, lo(dst), width); ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ break; ++ } ++ clobber_reg64(ctx, dst); ++} ++ ++/* Truncate a register double word, word or half word */ ++static void emit_trunc_r64(struct jit_context *ctx, const u8 dst[], u32 width) ++{ ++ switch (width) { ++ case 64: ++ break; ++ /* Zero-extend a word */ ++ case 32: ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ clobber_reg(ctx, hi(dst)); ++ break; ++ /* Zero-extend a half word */ ++ case 16: ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ emit(ctx, andi, lo(dst), lo(dst), 0xffff); ++ clobber_reg64(ctx, dst); ++ break; ++ } ++} ++ ++/* Load operation: dst = *(size*)(src + off) */ ++static void emit_ldx(struct jit_context *ctx, ++ const u8 dst[], u8 src, s16 off, u8 size) ++{ ++ switch (size) { ++ /* Load a byte */ ++ case BPF_B: ++ emit(ctx, lbu, lo(dst), off, src); ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ break; ++ /* Load a half word */ ++ case BPF_H: ++ emit(ctx, lhu, lo(dst), off, src); ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ break; ++ /* Load a word */ ++ case BPF_W: ++ emit(ctx, lw, lo(dst), off, src); ++ emit(ctx, move, hi(dst), MIPS_R_ZERO); ++ break; ++ /* Load a double word */ ++ case BPF_DW: ++ if (dst[1] == src) { ++ emit(ctx, lw, dst[0], off + 4, src); ++ emit(ctx, lw, dst[1], off, src); ++ } else { ++ emit(ctx, lw, dst[1], off, src); ++ emit(ctx, lw, dst[0], off + 4, src); ++ } ++ emit_load_delay(ctx); ++ break; ++ } ++ clobber_reg64(ctx, dst); ++} ++ ++/* Store operation: *(size *)(dst + off) = src */ ++static void emit_stx(struct jit_context *ctx, ++ const u8 dst, const u8 src[], s16 off, u8 size) ++{ ++ switch (size) { ++ /* Store a byte */ ++ case BPF_B: ++ emit(ctx, sb, lo(src), off, dst); ++ break; ++ /* Store a half word */ ++ case BPF_H: ++ emit(ctx, sh, lo(src), off, dst); ++ break; ++ /* Store a word */ ++ case BPF_W: ++ emit(ctx, sw, lo(src), off, dst); ++ break; ++ /* Store a double word */ ++ case BPF_DW: ++ emit(ctx, sw, src[1], off, dst); ++ emit(ctx, sw, src[0], off + 4, dst); ++ break; ++ } ++} ++ ++/* Atomic read-modify-write (32-bit, non-ll/sc fallback) */ ++static void emit_atomic_r32(struct jit_context *ctx, ++ u8 dst, u8 src, s16 off, u8 code) ++{ ++ u32 exclude = 0; ++ u32 addr = 0; ++ ++ /* Push caller-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ 0, JIT_RESERVED_STACK); ++ /* ++ * Argument 1: dst+off if xchg, otherwise src, passed in register a0 ++ * Argument 2: src if xchg, othersize dst+off, passed in register a1 ++ */ ++ emit(ctx, move, MIPS_R_T9, dst); ++ emit(ctx, move, MIPS_R_A0, src); ++ emit(ctx, addiu, MIPS_R_A1, MIPS_R_T9, off); ++ ++ /* Emit function call */ ++ switch (code) { ++ case BPF_ADD: ++ addr = (u32)&atomic_add; ++ break; ++ case BPF_SUB: ++ addr = (u32)&atomic_sub; ++ break; ++ case BPF_OR: ++ addr = (u32)&atomic_or; ++ break; ++ case BPF_AND: ++ addr = (u32)&atomic_and; ++ break; ++ case BPF_XOR: ++ addr = (u32)&atomic_xor; ++ break; ++ } ++ emit_mov_i(ctx, MIPS_R_T9, addr); ++ emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9); ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* Restore caller-saved registers, except any fetched value */ ++ pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ exclude, JIT_RESERVED_STACK); ++ emit_load_delay(ctx); ++ clobber_reg(ctx, MIPS_R_RA); ++} ++ ++/* Atomic read-modify-write (64-bit) */ ++static void emit_atomic_r64(struct jit_context *ctx, ++ u8 dst, const u8 src[], s16 off, u8 code) ++{ ++ const u8 *r1 = bpf2mips32[BPF_REG_1]; /* Mapped to a0-a1 */ ++ u32 exclude = 0; ++ u32 addr = 0; ++ ++ /* Push caller-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ 0, JIT_RESERVED_STACK); ++ /* ++ * Argument 1: 64-bit src, passed in registers a0-a1 ++ * Argument 2: 32-bit dst+off, passed in register a2 ++ */ ++ emit(ctx, move, MIPS_R_T9, dst); ++ emit(ctx, move, r1[0], src[0]); ++ emit(ctx, move, r1[1], src[1]); ++ emit(ctx, addiu, MIPS_R_A2, MIPS_R_T9, off); ++ ++ /* Emit function call */ ++ switch (code) { ++ case BPF_ADD: ++ addr = (u32)&atomic64_add; ++ break; ++ case BPF_SUB: ++ addr = (u32)&atomic64_sub; ++ break; ++ case BPF_OR: ++ addr = (u32)&atomic64_or; ++ break; ++ case BPF_AND: ++ addr = (u32)&atomic64_and; ++ break; ++ case BPF_XOR: ++ addr = (u32)&atomic64_xor; ++ break; ++ } ++ emit_mov_i(ctx, MIPS_R_T9, addr); ++ emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9); ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* Restore caller-saved registers, except any fetched value */ ++ pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, ++ exclude, JIT_RESERVED_STACK); ++ emit_load_delay(ctx); ++ clobber_reg(ctx, MIPS_R_RA); ++} ++ ++/* ++ * Conditional movz or an emulated equivalent. ++ * Note that the rs register may be modified. ++ */ ++static void emit_movz_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt) ++{ ++ if (cpu_has_mips_2) { ++ emit(ctx, movz, rd, rs, rt); /* rd = rt ? rd : rs */ ++ } else if (cpu_has_mips32r6) { ++ if (rs != MIPS_R_ZERO) ++ emit(ctx, seleqz, rs, rs, rt); /* rs = 0 if rt == 0 */ ++ emit(ctx, selnez, rd, rd, rt); /* rd = 0 if rt != 0 */ ++ if (rs != MIPS_R_ZERO) ++ emit(ctx, or, rd, rd, rs); /* rd = rd | rs */ ++ } else { ++ emit(ctx, bnez, rt, 8); /* PC += 8 if rd != 0 */ ++ emit(ctx, nop); /* +0: delay slot */ ++ emit(ctx, or, rd, rs, MIPS_R_ZERO); /* +4: rd = rs */ ++ } ++ clobber_reg(ctx, rd); ++ clobber_reg(ctx, rs); ++} ++ ++/* ++ * Conditional movn or an emulated equivalent. ++ * Note that the rs register may be modified. ++ */ ++static void emit_movn_r(struct jit_context *ctx, u8 rd, u8 rs, u8 rt) ++{ ++ if (cpu_has_mips_2) { ++ emit(ctx, movn, rd, rs, rt); /* rd = rt ? rs : rd */ ++ } else if (cpu_has_mips32r6) { ++ if (rs != MIPS_R_ZERO) ++ emit(ctx, selnez, rs, rs, rt); /* rs = 0 if rt == 0 */ ++ emit(ctx, seleqz, rd, rd, rt); /* rd = 0 if rt != 0 */ ++ if (rs != MIPS_R_ZERO) ++ emit(ctx, or, rd, rd, rs); /* rd = rd | rs */ ++ } else { ++ emit(ctx, beqz, rt, 8); /* PC += 8 if rd == 0 */ ++ emit(ctx, nop); /* +0: delay slot */ ++ emit(ctx, or, rd, rs, MIPS_R_ZERO); /* +4: rd = rs */ ++ } ++ clobber_reg(ctx, rd); ++ clobber_reg(ctx, rs); ++} ++ ++/* Emulation of 64-bit sltiu rd, rs, imm, where imm may be S32_MAX + 1 */ ++static void emit_sltiu_r64(struct jit_context *ctx, u8 rd, ++ const u8 rs[], s64 imm) ++{ ++ u8 tmp = MIPS_R_T9; ++ ++ if (imm < 0) { ++ emit_mov_i(ctx, rd, imm); /* rd = imm */ ++ emit(ctx, sltu, rd, lo(rs), rd); /* rd = rsl < rd */ ++ emit(ctx, sltiu, tmp, hi(rs), -1); /* tmp = rsh < ~0U */ ++ emit(ctx, or, rd, rd, tmp); /* rd = rd | tmp */ ++ } else { /* imm >= 0 */ ++ if (imm > 0x7fff) { ++ emit_mov_i(ctx, rd, (s32)imm); /* rd = imm */ ++ emit(ctx, sltu, rd, lo(rs), rd); /* rd = rsl < rd */ ++ } else { ++ emit(ctx, sltiu, rd, lo(rs), imm); /* rd = rsl < imm */ ++ } ++ emit_movn_r(ctx, rd, MIPS_R_ZERO, hi(rs)); /* rd = 0 if rsh */ ++ } ++} ++ ++/* Emulation of 64-bit sltu rd, rs, rt */ ++static void emit_sltu_r64(struct jit_context *ctx, u8 rd, ++ const u8 rs[], const u8 rt[]) ++{ ++ u8 tmp = MIPS_R_T9; ++ ++ emit(ctx, sltu, rd, lo(rs), lo(rt)); /* rd = rsl < rtl */ ++ emit(ctx, subu, tmp, hi(rs), hi(rt)); /* tmp = rsh - rth */ ++ emit_movn_r(ctx, rd, MIPS_R_ZERO, tmp); /* rd = 0 if tmp != 0 */ ++ emit(ctx, sltu, tmp, hi(rs), hi(rt)); /* tmp = rsh < rth */ ++ emit(ctx, or, rd, rd, tmp); /* rd = rd | tmp */ ++} ++ ++/* Emulation of 64-bit slti rd, rs, imm, where imm may be S32_MAX + 1 */ ++static void emit_slti_r64(struct jit_context *ctx, u8 rd, ++ const u8 rs[], s64 imm) ++{ ++ u8 t1 = MIPS_R_T8; ++ u8 t2 = MIPS_R_T9; ++ u8 cmp; ++ ++ /* ++ * if ((rs < 0) ^ (imm < 0)) t1 = imm >u rsl ++ * else t1 = rsl > 31 */ ++ if (imm < 0) ++ emit_movz_r(ctx, t1, t2, rd); /* t1 = rd ? t1 : t2 */ ++ else ++ emit_movn_r(ctx, t1, t2, rd); /* t1 = rd ? t2 : t1 */ ++ /* ++ * if ((imm < 0 && rsh != 0xffffffff) || ++ * (imm >= 0 && rsh != 0)) ++ * t1 = 0 ++ */ ++ if (imm < 0) { ++ emit(ctx, addiu, rd, hi(rs), 1); /* rd = rsh + 1 */ ++ cmp = rd; ++ } else { /* imm >= 0 */ ++ cmp = hi(rs); ++ } ++ emit_movn_r(ctx, t1, MIPS_R_ZERO, cmp); /* t1 = 0 if cmp != 0 */ ++ ++ /* ++ * if (imm < 0) rd = rsh < -1 ++ * else rd = rsh != 0 ++ * rd = rd | t1 ++ */ ++ emit(ctx, slti, rd, hi(rs), imm < 0 ? -1 : 0); /* rd = rsh < hi(imm) */ ++ emit(ctx, or, rd, rd, t1); /* rd = rd | t1 */ ++} ++ ++/* Emulation of 64-bit(slt rd, rs, rt) */ ++static void emit_slt_r64(struct jit_context *ctx, u8 rd, ++ const u8 rs[], const u8 rt[]) ++{ ++ u8 t1 = MIPS_R_T7; ++ u8 t2 = MIPS_R_T8; ++ u8 t3 = MIPS_R_T9; ++ ++ /* ++ * if ((rs < 0) ^ (rt < 0)) t1 = rtl > 31 */ ++ emit_movn_r(ctx, t1, t2, rd); /* t1 = rd ? t2 : t1 */ ++ emit_movn_r(ctx, t1, MIPS_R_ZERO, t3); /* t1 = 0 if t3 != 0 */ ++ ++ /* rd = (rsh < rth) | t1 */ ++ emit(ctx, slt, rd, hi(rs), hi(rt)); /* rd = rsh = -0x7fff && imm <= 0x8000) { ++ emit(ctx, addiu, tmp, lo(dst), -imm); ++ } else if ((u32)imm <= 0xffff) { ++ emit(ctx, xori, tmp, lo(dst), imm); ++ } else { /* Register fallback */ ++ emit_mov_i(ctx, tmp, imm); ++ emit(ctx, xor, tmp, lo(dst), tmp); ++ } ++ if (imm < 0) { /* Compare sign extension */ ++ emit(ctx, addu, MIPS_R_T9, hi(dst), 1); ++ emit(ctx, or, tmp, tmp, MIPS_R_T9); ++ } else { /* Compare zero extension */ ++ emit(ctx, or, tmp, tmp, hi(dst)); ++ } ++ if (op == BPF_JEQ) ++ emit(ctx, beqz, tmp, off); ++ else /* BPF_JNE */ ++ emit(ctx, bnez, tmp, off); ++ break; ++ /* PC += off if dst & imm */ ++ /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ ++ case BPF_JSET: ++ case JIT_JNSET: ++ if ((u32)imm <= 0xffff) { ++ emit(ctx, andi, tmp, lo(dst), imm); ++ } else { /* Register fallback */ ++ emit_mov_i(ctx, tmp, imm); ++ emit(ctx, and, tmp, lo(dst), tmp); ++ } ++ if (imm < 0) /* Sign-extension pulls in high word */ ++ emit(ctx, or, tmp, tmp, hi(dst)); ++ if (op == BPF_JSET) ++ emit(ctx, bnez, tmp, off); ++ else /* JIT_JNSET */ ++ emit(ctx, beqz, tmp, off); ++ break; ++ /* PC += off if dst > imm */ ++ case BPF_JGT: ++ emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1); ++ emit(ctx, beqz, tmp, off); ++ break; ++ /* PC += off if dst >= imm */ ++ case BPF_JGE: ++ emit_sltiu_r64(ctx, tmp, dst, imm); ++ emit(ctx, beqz, tmp, off); ++ break; ++ /* PC += off if dst < imm */ ++ case BPF_JLT: ++ emit_sltiu_r64(ctx, tmp, dst, imm); ++ emit(ctx, bnez, tmp, off); ++ break; ++ /* PC += off if dst <= imm */ ++ case BPF_JLE: ++ emit_sltiu_r64(ctx, tmp, dst, (s64)imm + 1); ++ emit(ctx, bnez, tmp, off); ++ break; ++ /* PC += off if dst > imm (signed) */ ++ case BPF_JSGT: ++ emit_slti_r64(ctx, tmp, dst, (s64)imm + 1); ++ emit(ctx, beqz, tmp, off); ++ break; ++ /* PC += off if dst >= imm (signed) */ ++ case BPF_JSGE: ++ emit_slti_r64(ctx, tmp, dst, imm); ++ emit(ctx, beqz, tmp, off); ++ break; ++ /* PC += off if dst < imm (signed) */ ++ case BPF_JSLT: ++ emit_slti_r64(ctx, tmp, dst, imm); ++ emit(ctx, bnez, tmp, off); ++ break; ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JSLE: ++ emit_slti_r64(ctx, tmp, dst, (s64)imm + 1); ++ emit(ctx, bnez, tmp, off); ++ break; ++ } ++} ++ ++/* Jump register (64-bit) */ ++static void emit_jmp_r64(struct jit_context *ctx, ++ const u8 dst[], const u8 src[], s32 off, u8 op) ++{ ++ u8 t1 = MIPS_R_T6; ++ u8 t2 = MIPS_R_T7; ++ ++ switch (op) { ++ /* No-op, used internally for branch optimization */ ++ case JIT_JNOP: ++ break; ++ /* PC += off if dst == src */ ++ /* PC += off if dst != src */ ++ case BPF_JEQ: ++ case BPF_JNE: ++ emit(ctx, subu, t1, lo(dst), lo(src)); ++ emit(ctx, subu, t2, hi(dst), hi(src)); ++ emit(ctx, or, t1, t1, t2); ++ if (op == BPF_JEQ) ++ emit(ctx, beqz, t1, off); ++ else /* BPF_JNE */ ++ emit(ctx, bnez, t1, off); ++ break; ++ /* PC += off if dst & src */ ++ /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ ++ case BPF_JSET: ++ case JIT_JNSET: ++ emit(ctx, and, t1, lo(dst), lo(src)); ++ emit(ctx, and, t2, hi(dst), hi(src)); ++ emit(ctx, or, t1, t1, t2); ++ if (op == BPF_JSET) ++ emit(ctx, bnez, t1, off); ++ else /* JIT_JNSET */ ++ emit(ctx, beqz, t1, off); ++ break; ++ /* PC += off if dst > src */ ++ case BPF_JGT: ++ emit_sltu_r64(ctx, t1, src, dst); ++ emit(ctx, bnez, t1, off); ++ break; ++ /* PC += off if dst >= src */ ++ case BPF_JGE: ++ emit_sltu_r64(ctx, t1, dst, src); ++ emit(ctx, beqz, t1, off); ++ break; ++ /* PC += off if dst < src */ ++ case BPF_JLT: ++ emit_sltu_r64(ctx, t1, dst, src); ++ emit(ctx, bnez, t1, off); ++ break; ++ /* PC += off if dst <= src */ ++ case BPF_JLE: ++ emit_sltu_r64(ctx, t1, src, dst); ++ emit(ctx, beqz, t1, off); ++ break; ++ /* PC += off if dst > src (signed) */ ++ case BPF_JSGT: ++ emit_slt_r64(ctx, t1, src, dst); ++ emit(ctx, bnez, t1, off); ++ break; ++ /* PC += off if dst >= src (signed) */ ++ case BPF_JSGE: ++ emit_slt_r64(ctx, t1, dst, src); ++ emit(ctx, beqz, t1, off); ++ break; ++ /* PC += off if dst < src (signed) */ ++ case BPF_JSLT: ++ emit_slt_r64(ctx, t1, dst, src); ++ emit(ctx, bnez, t1, off); ++ break; ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JSLE: ++ emit_slt_r64(ctx, t1, src, dst); ++ emit(ctx, beqz, t1, off); ++ break; ++ } ++} ++ ++/* Function call */ ++static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn) ++{ ++ bool fixed; ++ u64 addr; ++ ++ /* Decode the call address */ ++ if (bpf_jit_get_func_addr(ctx->program, insn, false, ++ &addr, &fixed) < 0) ++ return -1; ++ if (!fixed) ++ return -1; ++ ++ /* Push stack arguments */ ++ push_regs(ctx, JIT_STACK_REGS, 0, JIT_RESERVED_STACK); ++ ++ /* Emit function call */ ++ emit_mov_i(ctx, MIPS_R_T9, addr); ++ emit(ctx, jalr, MIPS_R_RA, MIPS_R_T9); ++ emit(ctx, nop); /* Delay slot */ ++ ++ clobber_reg(ctx, MIPS_R_RA); ++ clobber_reg(ctx, MIPS_R_V0); ++ clobber_reg(ctx, MIPS_R_V1); ++ return 0; ++} ++ ++/* Function tail call */ ++static int emit_tail_call(struct jit_context *ctx) ++{ ++ u8 ary = lo(bpf2mips32[BPF_REG_2]); ++ u8 ind = lo(bpf2mips32[BPF_REG_3]); ++ u8 t1 = MIPS_R_T8; ++ u8 t2 = MIPS_R_T9; ++ int off; ++ ++ /* ++ * Tail call: ++ * eBPF R1 - function argument (context ptr), passed in a0-a1 ++ * eBPF R2 - ptr to object with array of function entry points ++ * eBPF R3 - array index of function to be called ++ * stack[sz] - remaining tail call count, initialized in prologue ++ */ ++ ++ /* if (ind >= ary->map.max_entries) goto out */ ++ off = offsetof(struct bpf_array, map.max_entries); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, lw, t1, off, ary); /* t1 = ary->map.max_entries*/ ++ emit_load_delay(ctx); /* Load delay slot */ ++ emit(ctx, sltu, t1, ind, t1); /* t1 = ind < t1 */ ++ emit(ctx, beqz, t1, get_offset(ctx, 1)); /* PC += off(1) if t1 == 0 */ ++ /* (next insn delay slot) */ ++ /* if (TCC-- <= 0) goto out */ ++ emit(ctx, lw, t2, ctx->stack_size, MIPS_R_SP); /* t2 = *(SP + size) */ ++ emit_load_delay(ctx); /* Load delay slot */ ++ emit(ctx, blez, t2, get_offset(ctx, 1)); /* PC += off(1) if t2 < 0 */ ++ emit(ctx, addiu, t2, t2, -1); /* t2-- (delay slot) */ ++ emit(ctx, sw, t2, ctx->stack_size, MIPS_R_SP); /* *(SP + size) = t2 */ ++ ++ /* prog = ary->ptrs[ind] */ ++ off = offsetof(struct bpf_array, ptrs); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, sll, t1, ind, 2); /* t1 = ind << 2 */ ++ emit(ctx, addu, t1, t1, ary); /* t1 += ary */ ++ emit(ctx, lw, t2, off, t1); /* t2 = *(t1 + off) */ ++ emit_load_delay(ctx); /* Load delay slot */ ++ ++ /* if (prog == 0) goto out */ ++ emit(ctx, beqz, t2, get_offset(ctx, 1)); /* PC += off(1) if t2 == 0 */ ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* func = prog->bpf_func + 8 (prologue skip offset) */ ++ off = offsetof(struct bpf_prog, bpf_func); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, lw, t1, off, t2); /* t1 = *(t2 + off) */ ++ emit_load_delay(ctx); /* Load delay slot */ ++ emit(ctx, addiu, t1, t1, JIT_TCALL_SKIP); /* t1 += skip (8 or 12) */ ++ ++ /* goto func */ ++ build_epilogue(ctx, t1); ++ return 0; ++} ++ ++/* ++ * Stack frame layout for a JITed program (stack grows down). ++ * ++ * Higher address : Caller's stack frame : ++ * :----------------------------: ++ * : 64-bit eBPF args r3-r5 : ++ * :----------------------------: ++ * : Reserved / tail call count : ++ * +============================+ <--- MIPS sp before call ++ * | Callee-saved registers, | ++ * | including RA and FP | ++ * +----------------------------+ <--- eBPF FP (MIPS zero,fp) ++ * | Local eBPF variables | ++ * | allocated by program | ++ * +----------------------------+ ++ * | Reserved for caller-saved | ++ * | registers | ++ * +----------------------------+ ++ * | Reserved for 64-bit eBPF | ++ * | args r3-r5 & args passed | ++ * | on stack in kernel calls | ++ * Lower address +============================+ <--- MIPS sp ++ */ ++ ++/* Build program prologue to set up the stack and registers */ ++void build_prologue(struct jit_context *ctx) ++{ ++ const u8 *r1 = bpf2mips32[BPF_REG_1]; ++ const u8 *fp = bpf2mips32[BPF_REG_FP]; ++ int stack, saved, locals, reserved; ++ ++ /* ++ * The first two instructions initialize TCC in the reserved (for us) ++ * 16-byte area in the parent's stack frame. On a tail call, the ++ * calling function jumps into the prologue after these instructions. ++ */ ++ emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO, ++ min(MAX_TAIL_CALL_CNT + 1, 0xffff)); ++ emit(ctx, sw, MIPS_R_T9, 0, MIPS_R_SP); ++ ++ /* ++ * Register eBPF R1 contains the 32-bit context pointer argument. ++ * A 32-bit argument is always passed in MIPS register a0, regardless ++ * of CPU endianness. Initialize R1 accordingly and zero-extend. ++ */ ++#ifdef __BIG_ENDIAN ++ emit(ctx, move, lo(r1), MIPS_R_A0); ++#endif ++ ++ /* === Entry-point for tail calls === */ ++ ++ /* Zero-extend the 32-bit argument */ ++ emit(ctx, move, hi(r1), MIPS_R_ZERO); ++ ++ /* If the eBPF frame pointer was accessed it must be saved */ ++ if (ctx->accessed & BIT(BPF_REG_FP)) ++ clobber_reg64(ctx, fp); ++ ++ /* Compute the stack space needed for callee-saved registers */ ++ saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u32); ++ saved = ALIGN(saved, MIPS_STACK_ALIGNMENT); ++ ++ /* Stack space used by eBPF program local data */ ++ locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT); ++ ++ /* ++ * If we are emitting function calls, reserve extra stack space for ++ * caller-saved registers and function arguments passed on the stack. ++ * The required space is computed automatically during resource ++ * usage discovery (pass 1). ++ */ ++ reserved = ctx->stack_used; ++ ++ /* Allocate the stack frame */ ++ stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT); ++ emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, -stack); ++ ++ /* Store callee-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved); ++ ++ /* Initialize the eBPF frame pointer if accessed */ ++ if (ctx->accessed & BIT(BPF_REG_FP)) ++ emit(ctx, addiu, lo(fp), MIPS_R_SP, stack - saved); ++ ++ ctx->saved_size = saved; ++ ctx->stack_size = stack; ++} ++ ++/* Build the program epilogue to restore the stack and registers */ ++void build_epilogue(struct jit_context *ctx, int dest_reg) ++{ ++ /* Restore callee-saved registers from stack */ ++ pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, ++ ctx->stack_size - ctx->saved_size); ++ /* ++ * A 32-bit return value is always passed in MIPS register v0, ++ * but on big-endian targets the low part of R0 is mapped to v1. ++ */ ++#ifdef __BIG_ENDIAN ++ emit(ctx, move, MIPS_R_V0, MIPS_R_V1); ++#endif ++ ++ /* Jump to the return address and adjust the stack pointer */ ++ emit(ctx, jr, dest_reg); ++ emit(ctx, addiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size); ++} ++ ++/* Build one eBPF instruction */ ++int build_insn(const struct bpf_insn *insn, struct jit_context *ctx) ++{ ++ const u8 *dst = bpf2mips32[insn->dst_reg]; ++ const u8 *src = bpf2mips32[insn->src_reg]; ++ const u8 *tmp = bpf2mips32[JIT_REG_TMP]; ++ u8 code = insn->code; ++ s16 off = insn->off; ++ s32 imm = insn->imm; ++ s32 val, rel; ++ u8 alu, jmp; ++ ++ switch (code) { ++ /* ALU operations */ ++ /* dst = imm */ ++ case BPF_ALU | BPF_MOV | BPF_K: ++ emit_mov_i(ctx, lo(dst), imm); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = src */ ++ case BPF_ALU | BPF_MOV | BPF_X: ++ if (imm == 1) { ++ /* Special mov32 for zext */ ++ emit_mov_i(ctx, hi(dst), 0); ++ } else { ++ emit_mov_r(ctx, lo(dst), lo(src)); ++ emit_zext_ver(ctx, dst); ++ } ++ break; ++ /* dst = -dst */ ++ case BPF_ALU | BPF_NEG: ++ emit_alu_i(ctx, lo(dst), 0, BPF_NEG); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst & imm */ ++ /* dst = dst | imm */ ++ /* dst = dst ^ imm */ ++ /* dst = dst << imm */ ++ /* dst = dst >> imm */ ++ /* dst = dst >> imm (arithmetic) */ ++ /* dst = dst + imm */ ++ /* dst = dst - imm */ ++ /* dst = dst * imm */ ++ /* dst = dst / imm */ ++ /* dst = dst % imm */ ++ case BPF_ALU | BPF_OR | BPF_K: ++ case BPF_ALU | BPF_AND | BPF_K: ++ case BPF_ALU | BPF_XOR | BPF_K: ++ case BPF_ALU | BPF_LSH | BPF_K: ++ case BPF_ALU | BPF_RSH | BPF_K: ++ case BPF_ALU | BPF_ARSH | BPF_K: ++ case BPF_ALU | BPF_ADD | BPF_K: ++ case BPF_ALU | BPF_SUB | BPF_K: ++ case BPF_ALU | BPF_MUL | BPF_K: ++ case BPF_ALU | BPF_DIV | BPF_K: ++ case BPF_ALU | BPF_MOD | BPF_K: ++ if (!valid_alu_i(BPF_OP(code), imm)) { ++ emit_mov_i(ctx, MIPS_R_T6, imm); ++ emit_alu_r(ctx, lo(dst), MIPS_R_T6, BPF_OP(code)); ++ } else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) { ++ emit_alu_i(ctx, lo(dst), val, alu); ++ } ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst & src */ ++ /* dst = dst | src */ ++ /* dst = dst ^ src */ ++ /* dst = dst << src */ ++ /* dst = dst >> src */ ++ /* dst = dst >> src (arithmetic) */ ++ /* dst = dst + src */ ++ /* dst = dst - src */ ++ /* dst = dst * src */ ++ /* dst = dst / src */ ++ /* dst = dst % src */ ++ case BPF_ALU | BPF_AND | BPF_X: ++ case BPF_ALU | BPF_OR | BPF_X: ++ case BPF_ALU | BPF_XOR | BPF_X: ++ case BPF_ALU | BPF_LSH | BPF_X: ++ case BPF_ALU | BPF_RSH | BPF_X: ++ case BPF_ALU | BPF_ARSH | BPF_X: ++ case BPF_ALU | BPF_ADD | BPF_X: ++ case BPF_ALU | BPF_SUB | BPF_X: ++ case BPF_ALU | BPF_MUL | BPF_X: ++ case BPF_ALU | BPF_DIV | BPF_X: ++ case BPF_ALU | BPF_MOD | BPF_X: ++ emit_alu_r(ctx, lo(dst), lo(src), BPF_OP(code)); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = imm (64-bit) */ ++ case BPF_ALU64 | BPF_MOV | BPF_K: ++ emit_mov_se_i64(ctx, dst, imm); ++ break; ++ /* dst = src (64-bit) */ ++ case BPF_ALU64 | BPF_MOV | BPF_X: ++ emit_mov_r(ctx, lo(dst), lo(src)); ++ emit_mov_r(ctx, hi(dst), hi(src)); ++ break; ++ /* dst = -dst (64-bit) */ ++ case BPF_ALU64 | BPF_NEG: ++ emit_neg_i64(ctx, dst); ++ break; ++ /* dst = dst & imm (64-bit) */ ++ case BPF_ALU64 | BPF_AND | BPF_K: ++ emit_alu_i64(ctx, dst, imm, BPF_OP(code)); ++ break; ++ /* dst = dst | imm (64-bit) */ ++ /* dst = dst ^ imm (64-bit) */ ++ /* dst = dst + imm (64-bit) */ ++ /* dst = dst - imm (64-bit) */ ++ case BPF_ALU64 | BPF_OR | BPF_K: ++ case BPF_ALU64 | BPF_XOR | BPF_K: ++ case BPF_ALU64 | BPF_ADD | BPF_K: ++ case BPF_ALU64 | BPF_SUB | BPF_K: ++ if (imm) ++ emit_alu_i64(ctx, dst, imm, BPF_OP(code)); ++ break; ++ /* dst = dst << imm (64-bit) */ ++ /* dst = dst >> imm (64-bit) */ ++ /* dst = dst >> imm (64-bit, arithmetic) */ ++ case BPF_ALU64 | BPF_LSH | BPF_K: ++ case BPF_ALU64 | BPF_RSH | BPF_K: ++ case BPF_ALU64 | BPF_ARSH | BPF_K: ++ if (imm) ++ emit_shift_i64(ctx, dst, imm, BPF_OP(code)); ++ break; ++ /* dst = dst * imm (64-bit) */ ++ case BPF_ALU64 | BPF_MUL | BPF_K: ++ emit_mul_i64(ctx, dst, imm); ++ break; ++ /* dst = dst / imm (64-bit) */ ++ /* dst = dst % imm (64-bit) */ ++ case BPF_ALU64 | BPF_DIV | BPF_K: ++ case BPF_ALU64 | BPF_MOD | BPF_K: ++ /* ++ * Sign-extend the immediate value into a temporary register, ++ * and then do the operation on this register. ++ */ ++ emit_mov_se_i64(ctx, tmp, imm); ++ emit_divmod_r64(ctx, dst, tmp, BPF_OP(code)); ++ break; ++ /* dst = dst & src (64-bit) */ ++ /* dst = dst | src (64-bit) */ ++ /* dst = dst ^ src (64-bit) */ ++ /* dst = dst + src (64-bit) */ ++ /* dst = dst - src (64-bit) */ ++ case BPF_ALU64 | BPF_AND | BPF_X: ++ case BPF_ALU64 | BPF_OR | BPF_X: ++ case BPF_ALU64 | BPF_XOR | BPF_X: ++ case BPF_ALU64 | BPF_ADD | BPF_X: ++ case BPF_ALU64 | BPF_SUB | BPF_X: ++ emit_alu_r64(ctx, dst, src, BPF_OP(code)); ++ break; ++ /* dst = dst << src (64-bit) */ ++ /* dst = dst >> src (64-bit) */ ++ /* dst = dst >> src (64-bit, arithmetic) */ ++ case BPF_ALU64 | BPF_LSH | BPF_X: ++ case BPF_ALU64 | BPF_RSH | BPF_X: ++ case BPF_ALU64 | BPF_ARSH | BPF_X: ++ emit_shift_r64(ctx, dst, lo(src), BPF_OP(code)); ++ break; ++ /* dst = dst * src (64-bit) */ ++ case BPF_ALU64 | BPF_MUL | BPF_X: ++ emit_mul_r64(ctx, dst, src); ++ break; ++ /* dst = dst / src (64-bit) */ ++ /* dst = dst % src (64-bit) */ ++ case BPF_ALU64 | BPF_DIV | BPF_X: ++ case BPF_ALU64 | BPF_MOD | BPF_X: ++ emit_divmod_r64(ctx, dst, src, BPF_OP(code)); ++ break; ++ /* dst = htole(dst) */ ++ /* dst = htobe(dst) */ ++ case BPF_ALU | BPF_END | BPF_FROM_LE: ++ case BPF_ALU | BPF_END | BPF_FROM_BE: ++ if (BPF_SRC(code) == ++#ifdef __BIG_ENDIAN ++ BPF_FROM_LE ++#else ++ BPF_FROM_BE ++#endif ++ ) ++ emit_bswap_r64(ctx, dst, imm); ++ else ++ emit_trunc_r64(ctx, dst, imm); ++ break; ++ /* dst = imm64 */ ++ case BPF_LD | BPF_IMM | BPF_DW: ++ emit_mov_i(ctx, lo(dst), imm); ++ emit_mov_i(ctx, hi(dst), insn[1].imm); ++ return 1; ++ /* LDX: dst = *(size *)(src + off) */ ++ case BPF_LDX | BPF_MEM | BPF_W: ++ case BPF_LDX | BPF_MEM | BPF_H: ++ case BPF_LDX | BPF_MEM | BPF_B: ++ case BPF_LDX | BPF_MEM | BPF_DW: ++ emit_ldx(ctx, dst, lo(src), off, BPF_SIZE(code)); ++ break; ++ /* ST: *(size *)(dst + off) = imm */ ++ case BPF_ST | BPF_MEM | BPF_W: ++ case BPF_ST | BPF_MEM | BPF_H: ++ case BPF_ST | BPF_MEM | BPF_B: ++ case BPF_ST | BPF_MEM | BPF_DW: ++ switch (BPF_SIZE(code)) { ++ case BPF_DW: ++ /* Sign-extend immediate value into temporary reg */ ++ emit_mov_se_i64(ctx, tmp, imm); ++ break; ++ case BPF_W: ++ case BPF_H: ++ case BPF_B: ++ emit_mov_i(ctx, lo(tmp), imm); ++ break; ++ } ++ emit_stx(ctx, lo(dst), tmp, off, BPF_SIZE(code)); ++ break; ++ /* STX: *(size *)(dst + off) = src */ ++ case BPF_STX | BPF_MEM | BPF_W: ++ case BPF_STX | BPF_MEM | BPF_H: ++ case BPF_STX | BPF_MEM | BPF_B: ++ case BPF_STX | BPF_MEM | BPF_DW: ++ emit_stx(ctx, lo(dst), src, off, BPF_SIZE(code)); ++ break; ++ /* Speculation barrier */ ++ case BPF_ST | BPF_NOSPEC: ++ break; ++ /* Atomics */ ++ case BPF_STX | BPF_XADD | BPF_W: ++ switch (imm) { ++ case BPF_ADD: ++ case BPF_AND: ++ case BPF_OR: ++ case BPF_XOR: ++ if (cpu_has_llsc) ++ emit_atomic_r(ctx, lo(dst), lo(src), off, imm); ++ else /* Non-ll/sc fallback */ ++ emit_atomic_r32(ctx, lo(dst), lo(src), ++ off, imm); ++ break; ++ default: ++ goto notyet; ++ } ++ break; ++ /* Atomics (64-bit) */ ++ case BPF_STX | BPF_XADD | BPF_DW: ++ switch (imm) { ++ case BPF_ADD: ++ case BPF_AND: ++ case BPF_OR: ++ case BPF_XOR: ++ emit_atomic_r64(ctx, lo(dst), src, off, imm); ++ break; ++ default: ++ goto notyet; ++ } ++ break; ++ /* PC += off if dst == src */ ++ /* PC += off if dst != src */ ++ /* PC += off if dst & src */ ++ /* PC += off if dst > src */ ++ /* PC += off if dst >= src */ ++ /* PC += off if dst < src */ ++ /* PC += off if dst <= src */ ++ /* PC += off if dst > src (signed) */ ++ /* PC += off if dst >= src (signed) */ ++ /* PC += off if dst < src (signed) */ ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JMP32 | BPF_JEQ | BPF_X: ++ case BPF_JMP32 | BPF_JNE | BPF_X: ++ case BPF_JMP32 | BPF_JSET | BPF_X: ++ case BPF_JMP32 | BPF_JGT | BPF_X: ++ case BPF_JMP32 | BPF_JGE | BPF_X: ++ case BPF_JMP32 | BPF_JLT | BPF_X: ++ case BPF_JMP32 | BPF_JLE | BPF_X: ++ case BPF_JMP32 | BPF_JSGT | BPF_X: ++ case BPF_JMP32 | BPF_JSGE | BPF_X: ++ case BPF_JMP32 | BPF_JSLT | BPF_X: ++ case BPF_JMP32 | BPF_JSLE | BPF_X: ++ if (off == 0) ++ break; ++ setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel); ++ emit_jmp_r(ctx, lo(dst), lo(src), rel, jmp); ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == imm */ ++ /* PC += off if dst != imm */ ++ /* PC += off if dst & imm */ ++ /* PC += off if dst > imm */ ++ /* PC += off if dst >= imm */ ++ /* PC += off if dst < imm */ ++ /* PC += off if dst <= imm */ ++ /* PC += off if dst > imm (signed) */ ++ /* PC += off if dst >= imm (signed) */ ++ /* PC += off if dst < imm (signed) */ ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JMP32 | BPF_JEQ | BPF_K: ++ case BPF_JMP32 | BPF_JNE | BPF_K: ++ case BPF_JMP32 | BPF_JSET | BPF_K: ++ case BPF_JMP32 | BPF_JGT | BPF_K: ++ case BPF_JMP32 | BPF_JGE | BPF_K: ++ case BPF_JMP32 | BPF_JLT | BPF_K: ++ case BPF_JMP32 | BPF_JLE | BPF_K: ++ case BPF_JMP32 | BPF_JSGT | BPF_K: ++ case BPF_JMP32 | BPF_JSGE | BPF_K: ++ case BPF_JMP32 | BPF_JSLT | BPF_K: ++ case BPF_JMP32 | BPF_JSLE | BPF_K: ++ if (off == 0) ++ break; ++ setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel); ++ if (valid_jmp_i(jmp, imm)) { ++ emit_jmp_i(ctx, lo(dst), imm, rel, jmp); ++ } else { ++ /* Move large immediate to register */ ++ emit_mov_i(ctx, MIPS_R_T6, imm); ++ emit_jmp_r(ctx, lo(dst), MIPS_R_T6, rel, jmp); ++ } ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == src */ ++ /* PC += off if dst != src */ ++ /* PC += off if dst & src */ ++ /* PC += off if dst > src */ ++ /* PC += off if dst >= src */ ++ /* PC += off if dst < src */ ++ /* PC += off if dst <= src */ ++ /* PC += off if dst > src (signed) */ ++ /* PC += off if dst >= src (signed) */ ++ /* PC += off if dst < src (signed) */ ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JMP | BPF_JEQ | BPF_X: ++ case BPF_JMP | BPF_JNE | BPF_X: ++ case BPF_JMP | BPF_JSET | BPF_X: ++ case BPF_JMP | BPF_JGT | BPF_X: ++ case BPF_JMP | BPF_JGE | BPF_X: ++ case BPF_JMP | BPF_JLT | BPF_X: ++ case BPF_JMP | BPF_JLE | BPF_X: ++ case BPF_JMP | BPF_JSGT | BPF_X: ++ case BPF_JMP | BPF_JSGE | BPF_X: ++ case BPF_JMP | BPF_JSLT | BPF_X: ++ case BPF_JMP | BPF_JSLE | BPF_X: ++ if (off == 0) ++ break; ++ setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel); ++ emit_jmp_r64(ctx, dst, src, rel, jmp); ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == imm */ ++ /* PC += off if dst != imm */ ++ /* PC += off if dst & imm */ ++ /* PC += off if dst > imm */ ++ /* PC += off if dst >= imm */ ++ /* PC += off if dst < imm */ ++ /* PC += off if dst <= imm */ ++ /* PC += off if dst > imm (signed) */ ++ /* PC += off if dst >= imm (signed) */ ++ /* PC += off if dst < imm (signed) */ ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JMP | BPF_JEQ | BPF_K: ++ case BPF_JMP | BPF_JNE | BPF_K: ++ case BPF_JMP | BPF_JSET | BPF_K: ++ case BPF_JMP | BPF_JGT | BPF_K: ++ case BPF_JMP | BPF_JGE | BPF_K: ++ case BPF_JMP | BPF_JLT | BPF_K: ++ case BPF_JMP | BPF_JLE | BPF_K: ++ case BPF_JMP | BPF_JSGT | BPF_K: ++ case BPF_JMP | BPF_JSGE | BPF_K: ++ case BPF_JMP | BPF_JSLT | BPF_K: ++ case BPF_JMP | BPF_JSLE | BPF_K: ++ if (off == 0) ++ break; ++ setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel); ++ emit_jmp_i64(ctx, dst, imm, rel, jmp); ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off */ ++ case BPF_JMP | BPF_JA: ++ if (off == 0) ++ break; ++ if (emit_ja(ctx, off) < 0) ++ goto toofar; ++ break; ++ /* Tail call */ ++ case BPF_JMP | BPF_TAIL_CALL: ++ if (emit_tail_call(ctx) < 0) ++ goto invalid; ++ break; ++ /* Function call */ ++ case BPF_JMP | BPF_CALL: ++ if (emit_call(ctx, insn) < 0) ++ goto invalid; ++ break; ++ /* Function return */ ++ case BPF_JMP | BPF_EXIT: ++ /* ++ * Optimization: when last instruction is EXIT ++ * simply continue to epilogue. ++ */ ++ if (ctx->bpf_index == ctx->program->len - 1) ++ break; ++ if (emit_exit(ctx) < 0) ++ goto toofar; ++ break; ++ ++ default: ++invalid: ++ pr_err_once("unknown opcode %02x\n", code); ++ return -EINVAL; ++notyet: ++ pr_info_once("*** NOT YET: opcode %02x ***\n", code); ++ return -EFAULT; ++toofar: ++ pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n", ++ ctx->bpf_index, code); ++ return -E2BIG; ++ } ++ return 0; ++} diff --git a/target/linux/generic/backport-5.15/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch b/target/linux/generic/backport-5.15/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch new file mode 100644 index 0000000000..38b46c0b76 --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-03-mips-bpf-Add-new-eBPF-JIT-for-64-bit-MIPS.patch @@ -0,0 +1,1005 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:05 +0200 +Subject: [PATCH] mips: bpf: Add new eBPF JIT for 64-bit MIPS + +This is an implementation on of an eBPF JIT for 64-bit MIPS III-V and +MIPS64r1-r6. It uses the same framework introduced by the 32-bit JIT. + +Signed-off-by: Johan Almbladh +--- + create mode 100644 arch/mips/net/bpf_jit_comp64.c + +--- /dev/null ++++ b/arch/mips/net/bpf_jit_comp64.c +@@ -0,0 +1,991 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Just-In-Time compiler for eBPF bytecode on MIPS. ++ * Implementation of JIT functions for 64-bit CPUs. ++ * ++ * Copyright (c) 2021 Anyfi Networks AB. ++ * Author: Johan Almbladh ++ * ++ * Based on code and ideas from ++ * Copyright (c) 2017 Cavium, Inc. ++ * Copyright (c) 2017 Shubham Bansal ++ * Copyright (c) 2011 Mircea Gherzan ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bpf_jit_comp.h" ++ ++/* MIPS t0-t3 are not available in the n64 ABI */ ++#undef MIPS_R_T0 ++#undef MIPS_R_T1 ++#undef MIPS_R_T2 ++#undef MIPS_R_T3 ++ ++/* Stack is 16-byte aligned in n64 ABI */ ++#define MIPS_STACK_ALIGNMENT 16 ++ ++/* Extra 64-bit eBPF registers used by JIT */ ++#define JIT_REG_TC (MAX_BPF_JIT_REG + 0) ++#define JIT_REG_ZX (MAX_BPF_JIT_REG + 1) ++ ++/* Number of prologue bytes to skip when doing a tail call */ ++#define JIT_TCALL_SKIP 4 ++ ++/* Callee-saved CPU registers that the JIT must preserve */ ++#define JIT_CALLEE_REGS \ ++ (BIT(MIPS_R_S0) | \ ++ BIT(MIPS_R_S1) | \ ++ BIT(MIPS_R_S2) | \ ++ BIT(MIPS_R_S3) | \ ++ BIT(MIPS_R_S4) | \ ++ BIT(MIPS_R_S5) | \ ++ BIT(MIPS_R_S6) | \ ++ BIT(MIPS_R_S7) | \ ++ BIT(MIPS_R_GP) | \ ++ BIT(MIPS_R_FP) | \ ++ BIT(MIPS_R_RA)) ++ ++/* Caller-saved CPU registers available for JIT use */ ++#define JIT_CALLER_REGS \ ++ (BIT(MIPS_R_A5) | \ ++ BIT(MIPS_R_A6) | \ ++ BIT(MIPS_R_A7)) ++/* ++ * Mapping of 64-bit eBPF registers to 64-bit native MIPS registers. ++ * MIPS registers t4 - t7 may be used by the JIT as temporary registers. ++ * MIPS registers t8 - t9 are reserved for single-register common functions. ++ */ ++static const u8 bpf2mips64[] = { ++ /* Return value from in-kernel function, and exit value from eBPF */ ++ [BPF_REG_0] = MIPS_R_V0, ++ /* Arguments from eBPF program to in-kernel function */ ++ [BPF_REG_1] = MIPS_R_A0, ++ [BPF_REG_2] = MIPS_R_A1, ++ [BPF_REG_3] = MIPS_R_A2, ++ [BPF_REG_4] = MIPS_R_A3, ++ [BPF_REG_5] = MIPS_R_A4, ++ /* Callee-saved registers that in-kernel function will preserve */ ++ [BPF_REG_6] = MIPS_R_S0, ++ [BPF_REG_7] = MIPS_R_S1, ++ [BPF_REG_8] = MIPS_R_S2, ++ [BPF_REG_9] = MIPS_R_S3, ++ /* Read-only frame pointer to access the eBPF stack */ ++ [BPF_REG_FP] = MIPS_R_FP, ++ /* Temporary register for blinding constants */ ++ [BPF_REG_AX] = MIPS_R_AT, ++ /* Tail call count register, caller-saved */ ++ [JIT_REG_TC] = MIPS_R_A5, ++ /* Constant for register zero-extension */ ++ [JIT_REG_ZX] = MIPS_R_V1, ++}; ++ ++/* ++ * MIPS 32-bit operations on 64-bit registers generate a sign-extended ++ * result. However, the eBPF ISA mandates zero-extension, so we rely on the ++ * verifier to add that for us (emit_zext_ver). In addition, ALU arithmetic ++ * operations, right shift and byte swap require properly sign-extended ++ * operands or the result is unpredictable. We emit explicit sign-extensions ++ * in those cases. ++ */ ++ ++/* Sign extension */ ++static void emit_sext(struct jit_context *ctx, u8 dst, u8 src) ++{ ++ emit(ctx, sll, dst, src, 0); ++ clobber_reg(ctx, dst); ++} ++ ++/* Zero extension */ ++static void emit_zext(struct jit_context *ctx, u8 dst) ++{ ++ if (cpu_has_mips64r2 || cpu_has_mips64r6) { ++ emit(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32); ++ } else { ++ emit(ctx, and, dst, dst, bpf2mips64[JIT_REG_ZX]); ++ access_reg(ctx, JIT_REG_ZX); /* We need the ZX register */ ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Zero extension, if verifier does not do it for us */ ++static void emit_zext_ver(struct jit_context *ctx, u8 dst) ++{ ++ if (!ctx->program->aux->verifier_zext) ++ emit_zext(ctx, dst); ++} ++ ++/* dst = imm (64-bit) */ ++static void emit_mov_i64(struct jit_context *ctx, u8 dst, u64 imm64) ++{ ++ if (imm64 >= 0xffffffffffff8000ULL || imm64 < 0x8000ULL) { ++ emit(ctx, daddiu, dst, MIPS_R_ZERO, (s16)imm64); ++ } else if (imm64 >= 0xffffffff80000000ULL || ++ (imm64 < 0x80000000 && imm64 > 0xffff)) { ++ emit(ctx, lui, dst, (s16)(imm64 >> 16)); ++ emit(ctx, ori, dst, dst, (u16)imm64 & 0xffff); ++ } else { ++ u8 acc = MIPS_R_ZERO; ++ int k; ++ ++ for (k = 0; k < 4; k++) { ++ u16 half = imm64 >> (48 - 16 * k); ++ ++ if (acc == dst) ++ emit(ctx, dsll, dst, dst, 16); ++ ++ if (half) { ++ emit(ctx, ori, dst, acc, half); ++ acc = dst; ++ } ++ } ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* ALU immediate operation (64-bit) */ ++static void emit_alu_i64(struct jit_context *ctx, u8 dst, s32 imm, u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = dst | imm */ ++ case BPF_OR: ++ emit(ctx, ori, dst, dst, (u16)imm); ++ break; ++ /* dst = dst ^ imm */ ++ case BPF_XOR: ++ emit(ctx, xori, dst, dst, (u16)imm); ++ break; ++ /* dst = -dst */ ++ case BPF_NEG: ++ emit(ctx, dsubu, dst, MIPS_R_ZERO, dst); ++ break; ++ /* dst = dst << imm */ ++ case BPF_LSH: ++ emit(ctx, dsll_safe, dst, dst, imm); ++ break; ++ /* dst = dst >> imm */ ++ case BPF_RSH: ++ emit(ctx, dsrl_safe, dst, dst, imm); ++ break; ++ /* dst = dst >> imm (arithmetic) */ ++ case BPF_ARSH: ++ emit(ctx, dsra_safe, dst, dst, imm); ++ break; ++ /* dst = dst + imm */ ++ case BPF_ADD: ++ emit(ctx, daddiu, dst, dst, imm); ++ break; ++ /* dst = dst - imm */ ++ case BPF_SUB: ++ emit(ctx, daddiu, dst, dst, -imm); ++ break; ++ default: ++ /* Width-generic operations */ ++ emit_alu_i(ctx, dst, imm, op); ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* ALU register operation (64-bit) */ ++static void emit_alu_r64(struct jit_context *ctx, u8 dst, u8 src, u8 op) ++{ ++ switch (BPF_OP(op)) { ++ /* dst = dst << src */ ++ case BPF_LSH: ++ emit(ctx, dsllv, dst, dst, src); ++ break; ++ /* dst = dst >> src */ ++ case BPF_RSH: ++ emit(ctx, dsrlv, dst, dst, src); ++ break; ++ /* dst = dst >> src (arithmetic) */ ++ case BPF_ARSH: ++ emit(ctx, dsrav, dst, dst, src); ++ break; ++ /* dst = dst + src */ ++ case BPF_ADD: ++ emit(ctx, daddu, dst, dst, src); ++ break; ++ /* dst = dst - src */ ++ case BPF_SUB: ++ emit(ctx, dsubu, dst, dst, src); ++ break; ++ /* dst = dst * src */ ++ case BPF_MUL: ++ if (cpu_has_mips64r6) { ++ emit(ctx, dmulu, dst, dst, src); ++ } else { ++ emit(ctx, dmultu, dst, src); ++ emit(ctx, mflo, dst); ++ } ++ break; ++ /* dst = dst / src */ ++ case BPF_DIV: ++ if (cpu_has_mips64r6) { ++ emit(ctx, ddivu_r6, dst, dst, src); ++ } else { ++ emit(ctx, ddivu, dst, src); ++ emit(ctx, mflo, dst); ++ } ++ break; ++ /* dst = dst % src */ ++ case BPF_MOD: ++ if (cpu_has_mips64r6) { ++ emit(ctx, dmodu, dst, dst, src); ++ } else { ++ emit(ctx, ddivu, dst, src); ++ emit(ctx, mfhi, dst); ++ } ++ break; ++ default: ++ /* Width-generic operations */ ++ emit_alu_r(ctx, dst, src, op); ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Swap sub words in a register double word */ ++static void emit_swap_r64(struct jit_context *ctx, u8 dst, u8 mask, u32 bits) ++{ ++ u8 tmp = MIPS_R_T9; ++ ++ emit(ctx, and, tmp, dst, mask); /* tmp = dst & mask */ ++ emit(ctx, dsll, tmp, tmp, bits); /* tmp = tmp << bits */ ++ emit(ctx, dsrl, dst, dst, bits); /* dst = dst >> bits */ ++ emit(ctx, and, dst, dst, mask); /* dst = dst & mask */ ++ emit(ctx, or, dst, dst, tmp); /* dst = dst | tmp */ ++} ++ ++/* Swap bytes and truncate a register double word, word or half word */ ++static void emit_bswap_r64(struct jit_context *ctx, u8 dst, u32 width) ++{ ++ switch (width) { ++ /* Swap bytes in a double word */ ++ case 64: ++ if (cpu_has_mips64r2 || cpu_has_mips64r6) { ++ emit(ctx, dsbh, dst, dst); ++ emit(ctx, dshd, dst, dst); ++ } else { ++ u8 t1 = MIPS_R_T6; ++ u8 t2 = MIPS_R_T7; ++ ++ emit(ctx, dsll32, t2, dst, 0); /* t2 = dst << 32 */ ++ emit(ctx, dsrl32, dst, dst, 0); /* dst = dst >> 32 */ ++ emit(ctx, or, dst, dst, t2); /* dst = dst | t2 */ ++ ++ emit(ctx, ori, t2, MIPS_R_ZERO, 0xffff); ++ emit(ctx, dsll32, t1, t2, 0); /* t1 = t2 << 32 */ ++ emit(ctx, or, t1, t1, t2); /* t1 = t1 | t2 */ ++ emit_swap_r64(ctx, dst, t1, 16);/* dst = swap16(dst) */ ++ ++ emit(ctx, lui, t2, 0xff); /* t2 = 0x00ff0000 */ ++ emit(ctx, ori, t2, t2, 0xff); /* t2 = t2 | 0x00ff */ ++ emit(ctx, dsll32, t1, t2, 0); /* t1 = t2 << 32 */ ++ emit(ctx, or, t1, t1, t2); /* t1 = t1 | t2 */ ++ emit_swap_r64(ctx, dst, t1, 8); /* dst = swap8(dst) */ ++ } ++ break; ++ /* Swap bytes in a half word */ ++ /* Swap bytes in a word */ ++ case 32: ++ case 16: ++ emit_sext(ctx, dst, dst); ++ emit_bswap_r(ctx, dst, width); ++ if (cpu_has_mips64r2 || cpu_has_mips64r6) ++ emit_zext(ctx, dst); ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Truncate a register double word, word or half word */ ++static void emit_trunc_r64(struct jit_context *ctx, u8 dst, u32 width) ++{ ++ switch (width) { ++ case 64: ++ break; ++ /* Zero-extend a word */ ++ case 32: ++ emit_zext(ctx, dst); ++ break; ++ /* Zero-extend a half word */ ++ case 16: ++ emit(ctx, andi, dst, dst, 0xffff); ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Load operation: dst = *(size*)(src + off) */ ++static void emit_ldx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size) ++{ ++ switch (size) { ++ /* Load a byte */ ++ case BPF_B: ++ emit(ctx, lbu, dst, off, src); ++ break; ++ /* Load a half word */ ++ case BPF_H: ++ emit(ctx, lhu, dst, off, src); ++ break; ++ /* Load a word */ ++ case BPF_W: ++ emit(ctx, lwu, dst, off, src); ++ break; ++ /* Load a double word */ ++ case BPF_DW: ++ emit(ctx, ld, dst, off, src); ++ break; ++ } ++ clobber_reg(ctx, dst); ++} ++ ++/* Store operation: *(size *)(dst + off) = src */ ++static void emit_stx(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 size) ++{ ++ switch (size) { ++ /* Store a byte */ ++ case BPF_B: ++ emit(ctx, sb, src, off, dst); ++ break; ++ /* Store a half word */ ++ case BPF_H: ++ emit(ctx, sh, src, off, dst); ++ break; ++ /* Store a word */ ++ case BPF_W: ++ emit(ctx, sw, src, off, dst); ++ break; ++ /* Store a double word */ ++ case BPF_DW: ++ emit(ctx, sd, src, off, dst); ++ break; ++ } ++} ++ ++/* Atomic read-modify-write */ ++static void emit_atomic_r64(struct jit_context *ctx, ++ u8 dst, u8 src, s16 off, u8 code) ++{ ++ u8 t1 = MIPS_R_T6; ++ u8 t2 = MIPS_R_T7; ++ ++ emit(ctx, lld, t1, off, dst); ++ switch (code) { ++ case BPF_ADD: ++ emit(ctx, daddu, t2, t1, src); ++ break; ++ case BPF_AND: ++ emit(ctx, and, t2, t1, src); ++ break; ++ case BPF_OR: ++ emit(ctx, or, t2, t1, src); ++ break; ++ case BPF_XOR: ++ emit(ctx, xor, t2, t1, src); ++ break; ++ } ++ emit(ctx, scd, t2, off, dst); ++ emit(ctx, beqz, t2, -16); ++ emit(ctx, nop); /* Delay slot */ ++} ++ ++/* Function call */ ++static int emit_call(struct jit_context *ctx, const struct bpf_insn *insn) ++{ ++ u8 zx = bpf2mips64[JIT_REG_ZX]; ++ u8 tmp = MIPS_R_T6; ++ bool fixed; ++ u64 addr; ++ ++ /* Decode the call address */ ++ if (bpf_jit_get_func_addr(ctx->program, insn, false, ++ &addr, &fixed) < 0) ++ return -1; ++ if (!fixed) ++ return -1; ++ ++ /* Push caller-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0); ++ ++ /* Emit function call */ ++ emit_mov_i64(ctx, tmp, addr); ++ emit(ctx, jalr, MIPS_R_RA, tmp); ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* Restore caller-saved registers */ ++ pop_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0); ++ ++ /* Re-initialize the JIT zero-extension register if accessed */ ++ if (ctx->accessed & BIT(JIT_REG_ZX)) { ++ emit(ctx, daddiu, zx, MIPS_R_ZERO, -1); ++ emit(ctx, dsrl32, zx, zx, 0); ++ } ++ ++ clobber_reg(ctx, MIPS_R_RA); ++ clobber_reg(ctx, MIPS_R_V0); ++ clobber_reg(ctx, MIPS_R_V1); ++ return 0; ++} ++ ++/* Function tail call */ ++static int emit_tail_call(struct jit_context *ctx) ++{ ++ u8 ary = bpf2mips64[BPF_REG_2]; ++ u8 ind = bpf2mips64[BPF_REG_3]; ++ u8 tcc = bpf2mips64[JIT_REG_TC]; ++ u8 tmp = MIPS_R_T6; ++ int off; ++ ++ /* ++ * Tail call: ++ * eBPF R1 - function argument (context ptr), passed in a0-a1 ++ * eBPF R2 - ptr to object with array of function entry points ++ * eBPF R3 - array index of function to be called ++ */ ++ ++ /* if (ind >= ary->map.max_entries) goto out */ ++ off = offsetof(struct bpf_array, map.max_entries); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, lwu, tmp, off, ary); /* tmp = ary->map.max_entrs*/ ++ emit(ctx, sltu, tmp, ind, tmp); /* tmp = ind < t1 */ ++ emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/ ++ ++ /* if (--TCC < 0) goto out */ ++ emit(ctx, daddiu, tcc, tcc, -1); /* tcc-- (delay slot) */ ++ emit(ctx, bltz, tcc, get_offset(ctx, 1)); /* PC += off(1) if tcc < 0 */ ++ /* (next insn delay slot) */ ++ /* prog = ary->ptrs[ind] */ ++ off = offsetof(struct bpf_array, ptrs); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, dsll, tmp, ind, 3); /* tmp = ind << 3 */ ++ emit(ctx, daddu, tmp, tmp, ary); /* tmp += ary */ ++ emit(ctx, ld, tmp, off, tmp); /* tmp = *(tmp + off) */ ++ ++ /* if (prog == 0) goto out */ ++ emit(ctx, beqz, tmp, get_offset(ctx, 1)); /* PC += off(1) if tmp == 0*/ ++ emit(ctx, nop); /* Delay slot */ ++ ++ /* func = prog->bpf_func + 8 (prologue skip offset) */ ++ off = offsetof(struct bpf_prog, bpf_func); ++ if (off > 0x7fff) ++ return -1; ++ emit(ctx, ld, tmp, off, tmp); /* tmp = *(tmp + off) */ ++ emit(ctx, daddiu, tmp, tmp, JIT_TCALL_SKIP); /* tmp += skip (4) */ ++ ++ /* goto func */ ++ build_epilogue(ctx, tmp); ++ access_reg(ctx, JIT_REG_TC); ++ return 0; ++} ++ ++/* ++ * Stack frame layout for a JITed program (stack grows down). ++ * ++ * Higher address : Previous stack frame : ++ * +===========================+ <--- MIPS sp before call ++ * | Callee-saved registers, | ++ * | including RA and FP | ++ * +---------------------------+ <--- eBPF FP (MIPS fp) ++ * | Local eBPF variables | ++ * | allocated by program | ++ * +---------------------------+ ++ * | Reserved for caller-saved | ++ * | registers | ++ * Lower address +===========================+ <--- MIPS sp ++ */ ++ ++/* Build program prologue to set up the stack and registers */ ++void build_prologue(struct jit_context *ctx) ++{ ++ u8 fp = bpf2mips64[BPF_REG_FP]; ++ u8 tc = bpf2mips64[JIT_REG_TC]; ++ u8 zx = bpf2mips64[JIT_REG_ZX]; ++ int stack, saved, locals, reserved; ++ ++ /* ++ * The first instruction initializes the tail call count register. ++ * On a tail call, the calling function jumps into the prologue ++ * after this instruction. ++ */ ++ emit(ctx, addiu, tc, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT + 1, 0xffff)); ++ ++ /* === Entry-point for tail calls === */ ++ ++ /* ++ * If the eBPF frame pointer and tail call count registers were ++ * accessed they must be preserved. Mark them as clobbered here ++ * to save and restore them on the stack as needed. ++ */ ++ if (ctx->accessed & BIT(BPF_REG_FP)) ++ clobber_reg(ctx, fp); ++ if (ctx->accessed & BIT(JIT_REG_TC)) ++ clobber_reg(ctx, tc); ++ if (ctx->accessed & BIT(JIT_REG_ZX)) ++ clobber_reg(ctx, zx); ++ ++ /* Compute the stack space needed for callee-saved registers */ ++ saved = hweight32(ctx->clobbered & JIT_CALLEE_REGS) * sizeof(u64); ++ saved = ALIGN(saved, MIPS_STACK_ALIGNMENT); ++ ++ /* Stack space used by eBPF program local data */ ++ locals = ALIGN(ctx->program->aux->stack_depth, MIPS_STACK_ALIGNMENT); ++ ++ /* ++ * If we are emitting function calls, reserve extra stack space for ++ * caller-saved registers needed by the JIT. The required space is ++ * computed automatically during resource usage discovery (pass 1). ++ */ ++ reserved = ctx->stack_used; ++ ++ /* Allocate the stack frame */ ++ stack = ALIGN(saved + locals + reserved, MIPS_STACK_ALIGNMENT); ++ if (stack) ++ emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, -stack); ++ ++ /* Store callee-saved registers on stack */ ++ push_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, stack - saved); ++ ++ /* Initialize the eBPF frame pointer if accessed */ ++ if (ctx->accessed & BIT(BPF_REG_FP)) ++ emit(ctx, daddiu, fp, MIPS_R_SP, stack - saved); ++ ++ /* Initialize the ePF JIT zero-extension register if accessed */ ++ if (ctx->accessed & BIT(JIT_REG_ZX)) { ++ emit(ctx, daddiu, zx, MIPS_R_ZERO, -1); ++ emit(ctx, dsrl32, zx, zx, 0); ++ } ++ ++ ctx->saved_size = saved; ++ ctx->stack_size = stack; ++} ++ ++/* Build the program epilogue to restore the stack and registers */ ++void build_epilogue(struct jit_context *ctx, int dest_reg) ++{ ++ /* Restore callee-saved registers from stack */ ++ pop_regs(ctx, ctx->clobbered & JIT_CALLEE_REGS, 0, ++ ctx->stack_size - ctx->saved_size); ++ ++ /* Release the stack frame */ ++ if (ctx->stack_size) ++ emit(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, ctx->stack_size); ++ ++ /* Jump to return address and sign-extend the 32-bit return value */ ++ emit(ctx, jr, dest_reg); ++ emit(ctx, sll, MIPS_R_V0, MIPS_R_V0, 0); /* Delay slot */ ++} ++ ++/* Build one eBPF instruction */ ++int build_insn(const struct bpf_insn *insn, struct jit_context *ctx) ++{ ++ u8 dst = bpf2mips64[insn->dst_reg]; ++ u8 src = bpf2mips64[insn->src_reg]; ++ u8 code = insn->code; ++ s16 off = insn->off; ++ s32 imm = insn->imm; ++ s32 val, rel; ++ u8 alu, jmp; ++ ++ switch (code) { ++ /* ALU operations */ ++ /* dst = imm */ ++ case BPF_ALU | BPF_MOV | BPF_K: ++ emit_mov_i(ctx, dst, imm); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = src */ ++ case BPF_ALU | BPF_MOV | BPF_X: ++ if (imm == 1) { ++ /* Special mov32 for zext */ ++ emit_zext(ctx, dst); ++ } else { ++ emit_mov_r(ctx, dst, src); ++ emit_zext_ver(ctx, dst); ++ } ++ break; ++ /* dst = -dst */ ++ case BPF_ALU | BPF_NEG: ++ emit_sext(ctx, dst, dst); ++ emit_alu_i(ctx, dst, 0, BPF_NEG); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst & imm */ ++ /* dst = dst | imm */ ++ /* dst = dst ^ imm */ ++ /* dst = dst << imm */ ++ case BPF_ALU | BPF_OR | BPF_K: ++ case BPF_ALU | BPF_AND | BPF_K: ++ case BPF_ALU | BPF_XOR | BPF_K: ++ case BPF_ALU | BPF_LSH | BPF_K: ++ if (!valid_alu_i(BPF_OP(code), imm)) { ++ emit_mov_i(ctx, MIPS_R_T4, imm); ++ emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code)); ++ } else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) { ++ emit_alu_i(ctx, dst, val, alu); ++ } ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst >> imm */ ++ /* dst = dst >> imm (arithmetic) */ ++ /* dst = dst + imm */ ++ /* dst = dst - imm */ ++ /* dst = dst * imm */ ++ /* dst = dst / imm */ ++ /* dst = dst % imm */ ++ case BPF_ALU | BPF_RSH | BPF_K: ++ case BPF_ALU | BPF_ARSH | BPF_K: ++ case BPF_ALU | BPF_ADD | BPF_K: ++ case BPF_ALU | BPF_SUB | BPF_K: ++ case BPF_ALU | BPF_MUL | BPF_K: ++ case BPF_ALU | BPF_DIV | BPF_K: ++ case BPF_ALU | BPF_MOD | BPF_K: ++ if (!valid_alu_i(BPF_OP(code), imm)) { ++ emit_sext(ctx, dst, dst); ++ emit_mov_i(ctx, MIPS_R_T4, imm); ++ emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code)); ++ } else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) { ++ emit_sext(ctx, dst, dst); ++ emit_alu_i(ctx, dst, val, alu); ++ } ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst & src */ ++ /* dst = dst | src */ ++ /* dst = dst ^ src */ ++ /* dst = dst << src */ ++ case BPF_ALU | BPF_AND | BPF_X: ++ case BPF_ALU | BPF_OR | BPF_X: ++ case BPF_ALU | BPF_XOR | BPF_X: ++ case BPF_ALU | BPF_LSH | BPF_X: ++ emit_alu_r(ctx, dst, src, BPF_OP(code)); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = dst >> src */ ++ /* dst = dst >> src (arithmetic) */ ++ /* dst = dst + src */ ++ /* dst = dst - src */ ++ /* dst = dst * src */ ++ /* dst = dst / src */ ++ /* dst = dst % src */ ++ case BPF_ALU | BPF_RSH | BPF_X: ++ case BPF_ALU | BPF_ARSH | BPF_X: ++ case BPF_ALU | BPF_ADD | BPF_X: ++ case BPF_ALU | BPF_SUB | BPF_X: ++ case BPF_ALU | BPF_MUL | BPF_X: ++ case BPF_ALU | BPF_DIV | BPF_X: ++ case BPF_ALU | BPF_MOD | BPF_X: ++ emit_sext(ctx, dst, dst); ++ emit_sext(ctx, MIPS_R_T4, src); ++ emit_alu_r(ctx, dst, MIPS_R_T4, BPF_OP(code)); ++ emit_zext_ver(ctx, dst); ++ break; ++ /* dst = imm (64-bit) */ ++ case BPF_ALU64 | BPF_MOV | BPF_K: ++ emit_mov_i(ctx, dst, imm); ++ break; ++ /* dst = src (64-bit) */ ++ case BPF_ALU64 | BPF_MOV | BPF_X: ++ emit_mov_r(ctx, dst, src); ++ break; ++ /* dst = -dst (64-bit) */ ++ case BPF_ALU64 | BPF_NEG: ++ emit_alu_i64(ctx, dst, 0, BPF_NEG); ++ break; ++ /* dst = dst & imm (64-bit) */ ++ /* dst = dst | imm (64-bit) */ ++ /* dst = dst ^ imm (64-bit) */ ++ /* dst = dst << imm (64-bit) */ ++ /* dst = dst >> imm (64-bit) */ ++ /* dst = dst >> imm ((64-bit, arithmetic) */ ++ /* dst = dst + imm (64-bit) */ ++ /* dst = dst - imm (64-bit) */ ++ /* dst = dst * imm (64-bit) */ ++ /* dst = dst / imm (64-bit) */ ++ /* dst = dst % imm (64-bit) */ ++ case BPF_ALU64 | BPF_AND | BPF_K: ++ case BPF_ALU64 | BPF_OR | BPF_K: ++ case BPF_ALU64 | BPF_XOR | BPF_K: ++ case BPF_ALU64 | BPF_LSH | BPF_K: ++ case BPF_ALU64 | BPF_RSH | BPF_K: ++ case BPF_ALU64 | BPF_ARSH | BPF_K: ++ case BPF_ALU64 | BPF_ADD | BPF_K: ++ case BPF_ALU64 | BPF_SUB | BPF_K: ++ case BPF_ALU64 | BPF_MUL | BPF_K: ++ case BPF_ALU64 | BPF_DIV | BPF_K: ++ case BPF_ALU64 | BPF_MOD | BPF_K: ++ if (!valid_alu_i(BPF_OP(code), imm)) { ++ emit_mov_i(ctx, MIPS_R_T4, imm); ++ emit_alu_r64(ctx, dst, MIPS_R_T4, BPF_OP(code)); ++ } else if (rewrite_alu_i(BPF_OP(code), imm, &alu, &val)) { ++ emit_alu_i64(ctx, dst, val, alu); ++ } ++ break; ++ /* dst = dst & src (64-bit) */ ++ /* dst = dst | src (64-bit) */ ++ /* dst = dst ^ src (64-bit) */ ++ /* dst = dst << src (64-bit) */ ++ /* dst = dst >> src (64-bit) */ ++ /* dst = dst >> src (64-bit, arithmetic) */ ++ /* dst = dst + src (64-bit) */ ++ /* dst = dst - src (64-bit) */ ++ /* dst = dst * src (64-bit) */ ++ /* dst = dst / src (64-bit) */ ++ /* dst = dst % src (64-bit) */ ++ case BPF_ALU64 | BPF_AND | BPF_X: ++ case BPF_ALU64 | BPF_OR | BPF_X: ++ case BPF_ALU64 | BPF_XOR | BPF_X: ++ case BPF_ALU64 | BPF_LSH | BPF_X: ++ case BPF_ALU64 | BPF_RSH | BPF_X: ++ case BPF_ALU64 | BPF_ARSH | BPF_X: ++ case BPF_ALU64 | BPF_ADD | BPF_X: ++ case BPF_ALU64 | BPF_SUB | BPF_X: ++ case BPF_ALU64 | BPF_MUL | BPF_X: ++ case BPF_ALU64 | BPF_DIV | BPF_X: ++ case BPF_ALU64 | BPF_MOD | BPF_X: ++ emit_alu_r64(ctx, dst, src, BPF_OP(code)); ++ break; ++ /* dst = htole(dst) */ ++ /* dst = htobe(dst) */ ++ case BPF_ALU | BPF_END | BPF_FROM_LE: ++ case BPF_ALU | BPF_END | BPF_FROM_BE: ++ if (BPF_SRC(code) == ++#ifdef __BIG_ENDIAN ++ BPF_FROM_LE ++#else ++ BPF_FROM_BE ++#endif ++ ) ++ emit_bswap_r64(ctx, dst, imm); ++ else ++ emit_trunc_r64(ctx, dst, imm); ++ break; ++ /* dst = imm64 */ ++ case BPF_LD | BPF_IMM | BPF_DW: ++ emit_mov_i64(ctx, dst, (u32)imm | ((u64)insn[1].imm << 32)); ++ return 1; ++ /* LDX: dst = *(size *)(src + off) */ ++ case BPF_LDX | BPF_MEM | BPF_W: ++ case BPF_LDX | BPF_MEM | BPF_H: ++ case BPF_LDX | BPF_MEM | BPF_B: ++ case BPF_LDX | BPF_MEM | BPF_DW: ++ emit_ldx(ctx, dst, src, off, BPF_SIZE(code)); ++ break; ++ /* ST: *(size *)(dst + off) = imm */ ++ case BPF_ST | BPF_MEM | BPF_W: ++ case BPF_ST | BPF_MEM | BPF_H: ++ case BPF_ST | BPF_MEM | BPF_B: ++ case BPF_ST | BPF_MEM | BPF_DW: ++ emit_mov_i(ctx, MIPS_R_T4, imm); ++ emit_stx(ctx, dst, MIPS_R_T4, off, BPF_SIZE(code)); ++ break; ++ /* STX: *(size *)(dst + off) = src */ ++ case BPF_STX | BPF_MEM | BPF_W: ++ case BPF_STX | BPF_MEM | BPF_H: ++ case BPF_STX | BPF_MEM | BPF_B: ++ case BPF_STX | BPF_MEM | BPF_DW: ++ emit_stx(ctx, dst, src, off, BPF_SIZE(code)); ++ break; ++ /* Speculation barrier */ ++ case BPF_ST | BPF_NOSPEC: ++ break; ++ /* Atomics */ ++ case BPF_STX | BPF_XADD | BPF_W: ++ case BPF_STX | BPF_XADD | BPF_DW: ++ switch (imm) { ++ case BPF_ADD: ++ case BPF_AND: ++ case BPF_OR: ++ case BPF_XOR: ++ if (BPF_SIZE(code) == BPF_DW) { ++ emit_atomic_r64(ctx, dst, src, off, imm); ++ } else { /* 32-bit, no fetch */ ++ emit_sext(ctx, MIPS_R_T4, src); ++ emit_atomic_r(ctx, dst, MIPS_R_T4, off, imm); ++ } ++ break; ++ default: ++ goto notyet; ++ } ++ break; ++ /* PC += off if dst == src */ ++ /* PC += off if dst != src */ ++ /* PC += off if dst & src */ ++ /* PC += off if dst > src */ ++ /* PC += off if dst >= src */ ++ /* PC += off if dst < src */ ++ /* PC += off if dst <= src */ ++ /* PC += off if dst > src (signed) */ ++ /* PC += off if dst >= src (signed) */ ++ /* PC += off if dst < src (signed) */ ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JMP32 | BPF_JEQ | BPF_X: ++ case BPF_JMP32 | BPF_JNE | BPF_X: ++ case BPF_JMP32 | BPF_JSET | BPF_X: ++ case BPF_JMP32 | BPF_JGT | BPF_X: ++ case BPF_JMP32 | BPF_JGE | BPF_X: ++ case BPF_JMP32 | BPF_JLT | BPF_X: ++ case BPF_JMP32 | BPF_JLE | BPF_X: ++ case BPF_JMP32 | BPF_JSGT | BPF_X: ++ case BPF_JMP32 | BPF_JSGE | BPF_X: ++ case BPF_JMP32 | BPF_JSLT | BPF_X: ++ case BPF_JMP32 | BPF_JSLE | BPF_X: ++ if (off == 0) ++ break; ++ setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel); ++ emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */ ++ emit_sext(ctx, MIPS_R_T5, src); /* Sign-extended src */ ++ emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp); ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == imm */ ++ /* PC += off if dst != imm */ ++ /* PC += off if dst & imm */ ++ /* PC += off if dst > imm */ ++ /* PC += off if dst >= imm */ ++ /* PC += off if dst < imm */ ++ /* PC += off if dst <= imm */ ++ /* PC += off if dst > imm (signed) */ ++ /* PC += off if dst >= imm (signed) */ ++ /* PC += off if dst < imm (signed) */ ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JMP32 | BPF_JEQ | BPF_K: ++ case BPF_JMP32 | BPF_JNE | BPF_K: ++ case BPF_JMP32 | BPF_JSET | BPF_K: ++ case BPF_JMP32 | BPF_JGT | BPF_K: ++ case BPF_JMP32 | BPF_JGE | BPF_K: ++ case BPF_JMP32 | BPF_JLT | BPF_K: ++ case BPF_JMP32 | BPF_JLE | BPF_K: ++ case BPF_JMP32 | BPF_JSGT | BPF_K: ++ case BPF_JMP32 | BPF_JSGE | BPF_K: ++ case BPF_JMP32 | BPF_JSLT | BPF_K: ++ case BPF_JMP32 | BPF_JSLE | BPF_K: ++ if (off == 0) ++ break; ++ setup_jmp_i(ctx, imm, 32, BPF_OP(code), off, &jmp, &rel); ++ emit_sext(ctx, MIPS_R_T4, dst); /* Sign-extended dst */ ++ if (valid_jmp_i(jmp, imm)) { ++ emit_jmp_i(ctx, MIPS_R_T4, imm, rel, jmp); ++ } else { ++ /* Move large immediate to register, sign-extended */ ++ emit_mov_i(ctx, MIPS_R_T5, imm); ++ emit_jmp_r(ctx, MIPS_R_T4, MIPS_R_T5, rel, jmp); ++ } ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == src */ ++ /* PC += off if dst != src */ ++ /* PC += off if dst & src */ ++ /* PC += off if dst > src */ ++ /* PC += off if dst >= src */ ++ /* PC += off if dst < src */ ++ /* PC += off if dst <= src */ ++ /* PC += off if dst > src (signed) */ ++ /* PC += off if dst >= src (signed) */ ++ /* PC += off if dst < src (signed) */ ++ /* PC += off if dst <= src (signed) */ ++ case BPF_JMP | BPF_JEQ | BPF_X: ++ case BPF_JMP | BPF_JNE | BPF_X: ++ case BPF_JMP | BPF_JSET | BPF_X: ++ case BPF_JMP | BPF_JGT | BPF_X: ++ case BPF_JMP | BPF_JGE | BPF_X: ++ case BPF_JMP | BPF_JLT | BPF_X: ++ case BPF_JMP | BPF_JLE | BPF_X: ++ case BPF_JMP | BPF_JSGT | BPF_X: ++ case BPF_JMP | BPF_JSGE | BPF_X: ++ case BPF_JMP | BPF_JSLT | BPF_X: ++ case BPF_JMP | BPF_JSLE | BPF_X: ++ if (off == 0) ++ break; ++ setup_jmp_r(ctx, dst == src, BPF_OP(code), off, &jmp, &rel); ++ emit_jmp_r(ctx, dst, src, rel, jmp); ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off if dst == imm */ ++ /* PC += off if dst != imm */ ++ /* PC += off if dst & imm */ ++ /* PC += off if dst > imm */ ++ /* PC += off if dst >= imm */ ++ /* PC += off if dst < imm */ ++ /* PC += off if dst <= imm */ ++ /* PC += off if dst > imm (signed) */ ++ /* PC += off if dst >= imm (signed) */ ++ /* PC += off if dst < imm (signed) */ ++ /* PC += off if dst <= imm (signed) */ ++ case BPF_JMP | BPF_JEQ | BPF_K: ++ case BPF_JMP | BPF_JNE | BPF_K: ++ case BPF_JMP | BPF_JSET | BPF_K: ++ case BPF_JMP | BPF_JGT | BPF_K: ++ case BPF_JMP | BPF_JGE | BPF_K: ++ case BPF_JMP | BPF_JLT | BPF_K: ++ case BPF_JMP | BPF_JLE | BPF_K: ++ case BPF_JMP | BPF_JSGT | BPF_K: ++ case BPF_JMP | BPF_JSGE | BPF_K: ++ case BPF_JMP | BPF_JSLT | BPF_K: ++ case BPF_JMP | BPF_JSLE | BPF_K: ++ if (off == 0) ++ break; ++ setup_jmp_i(ctx, imm, 64, BPF_OP(code), off, &jmp, &rel); ++ if (valid_jmp_i(jmp, imm)) { ++ emit_jmp_i(ctx, dst, imm, rel, jmp); ++ } else { ++ /* Move large immediate to register */ ++ emit_mov_i(ctx, MIPS_R_T4, imm); ++ emit_jmp_r(ctx, dst, MIPS_R_T4, rel, jmp); ++ } ++ if (finish_jmp(ctx, jmp, off) < 0) ++ goto toofar; ++ break; ++ /* PC += off */ ++ case BPF_JMP | BPF_JA: ++ if (off == 0) ++ break; ++ if (emit_ja(ctx, off) < 0) ++ goto toofar; ++ break; ++ /* Tail call */ ++ case BPF_JMP | BPF_TAIL_CALL: ++ if (emit_tail_call(ctx) < 0) ++ goto invalid; ++ break; ++ /* Function call */ ++ case BPF_JMP | BPF_CALL: ++ if (emit_call(ctx, insn) < 0) ++ goto invalid; ++ break; ++ /* Function return */ ++ case BPF_JMP | BPF_EXIT: ++ /* ++ * Optimization: when last instruction is EXIT ++ * simply continue to epilogue. ++ */ ++ if (ctx->bpf_index == ctx->program->len - 1) ++ break; ++ if (emit_exit(ctx) < 0) ++ goto toofar; ++ break; ++ ++ default: ++invalid: ++ pr_err_once("unknown opcode %02x\n", code); ++ return -EINVAL; ++notyet: ++ pr_info_once("*** NOT YET: opcode %02x ***\n", code); ++ return -EFAULT; ++toofar: ++ pr_info_once("*** TOO FAR: jump at %u opcode %02x ***\n", ++ ctx->bpf_index, code); ++ return -E2BIG; ++ } ++ return 0; ++} diff --git a/target/linux/generic/backport-5.15/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch b/target/linux/generic/backport-5.15/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch new file mode 100644 index 0000000000..63553ebe58 --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-04-mips-bpf-Add-JIT-workarounds-for-CPU-errata.patch @@ -0,0 +1,120 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:06 +0200 +Subject: [PATCH] mips: bpf: Add JIT workarounds for CPU errata + +This patch adds workarounds for the following CPU errata to the MIPS +eBPF JIT, if enabled in the kernel configuration. + + - R10000 ll/sc weak ordering + - Loongson-3 ll/sc weak ordering + - Loongson-2F jump hang + +The Loongson-2F nop errata is implemented in uasm, which the JIT uses, +so no additional mitigations are needed for that. + +Signed-off-by: Johan Almbladh +Reviewed-by: Jiaxun Yang +--- + +--- a/arch/mips/net/bpf_jit_comp.c ++++ b/arch/mips/net/bpf_jit_comp.c +@@ -404,6 +404,7 @@ void emit_alu_r(struct jit_context *ctx, + /* Atomic read-modify-write (32-bit) */ + void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code) + { ++ LLSC_sync(ctx); + emit(ctx, ll, MIPS_R_T9, off, dst); + switch (code) { + case BPF_ADD: +@@ -420,18 +421,19 @@ void emit_atomic_r(struct jit_context *c + break; + } + emit(ctx, sc, MIPS_R_T8, off, dst); +- emit(ctx, beqz, MIPS_R_T8, -16); ++ emit(ctx, LLSC_beqz, MIPS_R_T8, -16 - LLSC_offset); + emit(ctx, nop); /* Delay slot */ + } + + /* Atomic compare-and-exchange (32-bit) */ + void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off) + { ++ LLSC_sync(ctx); + emit(ctx, ll, MIPS_R_T9, off, dst); + emit(ctx, bne, MIPS_R_T9, res, 12); + emit(ctx, move, MIPS_R_T8, src); /* Delay slot */ + emit(ctx, sc, MIPS_R_T8, off, dst); +- emit(ctx, beqz, MIPS_R_T8, -20); ++ emit(ctx, LLSC_beqz, MIPS_R_T8, -20 - LLSC_offset); + emit(ctx, move, res, MIPS_R_T9); /* Delay slot */ + clobber_reg(ctx, res); + } +--- a/arch/mips/net/bpf_jit_comp.h ++++ b/arch/mips/net/bpf_jit_comp.h +@@ -87,7 +87,7 @@ struct jit_context { + }; + + /* Emit the instruction if the JIT memory space has been allocated */ +-#define emit(ctx, func, ...) \ ++#define __emit(ctx, func, ...) \ + do { \ + if ((ctx)->target != NULL) { \ + u32 *p = &(ctx)->target[ctx->jit_index]; \ +@@ -95,6 +95,30 @@ do { \ + } \ + (ctx)->jit_index++; \ + } while (0) ++#define emit(...) __emit(__VA_ARGS__) ++ ++/* Workaround for R10000 ll/sc errata */ ++#ifdef CONFIG_WAR_R10000 ++#define LLSC_beqz beqzl ++#else ++#define LLSC_beqz beqz ++#endif ++ ++/* Workaround for Loongson-3 ll/sc errata */ ++#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS ++#define LLSC_sync(ctx) emit(ctx, sync, 0) ++#define LLSC_offset 4 ++#else ++#define LLSC_sync(ctx) ++#define LLSC_offset 0 ++#endif ++ ++/* Workaround for Loongson-2F jump errata */ ++#ifdef CONFIG_CPU_JUMP_WORKAROUNDS ++#define JALR_MASK 0xffffffffcfffffffULL ++#else ++#define JALR_MASK (~0ULL) ++#endif + + /* + * Mark a BPF register as accessed, it needs to be +--- a/arch/mips/net/bpf_jit_comp64.c ++++ b/arch/mips/net/bpf_jit_comp64.c +@@ -375,6 +375,7 @@ static void emit_atomic_r64(struct jit_c + u8 t1 = MIPS_R_T6; + u8 t2 = MIPS_R_T7; + ++ LLSC_sync(ctx); + emit(ctx, lld, t1, off, dst); + switch (code) { + case BPF_ADD: +@@ -391,7 +392,7 @@ static void emit_atomic_r64(struct jit_c + break; + } + emit(ctx, scd, t2, off, dst); +- emit(ctx, beqz, t2, -16); ++ emit(ctx, LLSC_beqz, t2, -16 - LLSC_offset); + emit(ctx, nop); /* Delay slot */ + } + +@@ -414,7 +415,7 @@ static int emit_call(struct jit_context + push_regs(ctx, ctx->clobbered & JIT_CALLER_REGS, 0, 0); + + /* Emit function call */ +- emit_mov_i64(ctx, tmp, addr); ++ emit_mov_i64(ctx, tmp, addr & JALR_MASK); + emit(ctx, jalr, MIPS_R_RA, tmp); + emit(ctx, nop); /* Delay slot */ + diff --git a/target/linux/generic/backport-5.15/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch b/target/linux/generic/backport-5.15/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch new file mode 100644 index 0000000000..10685c5f3c --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-05-mips-bpf-Enable-eBPF-JITs.patch @@ -0,0 +1,61 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:07 +0200 +Subject: [PATCH] mips: bpf: Enable eBPF JITs + +This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also +disables the old cBPF JIT to so cBPF programs are converted to use the +new JIT. + +Workarounds for R4000 CPU errata are not implemented by the JIT, so the +JIT is disabled if any of those workarounds are configured. + +Signed-off-by: Johan Almbladh +--- + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3294,6 +3294,7 @@ S: Supported + F: arch/arm64/net/ + + BPF JIT for MIPS (32-BIT AND 64-BIT) ++M: Johan Almbladh + M: Paul Burton + L: netdev@vger.kernel.org + L: bpf@vger.kernel.org +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -49,7 +49,6 @@ config MIPS + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES + select HAVE_ASM_MODVERSIONS +- select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS + select HAVE_CONTEXT_TRACKING + select HAVE_TIF_NOHZ + select HAVE_C_RECORDMCOUNT +@@ -57,7 +56,10 @@ config MIPS + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DMA_CONTIGUOUS + select HAVE_DYNAMIC_FTRACE +- select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2 ++ select HAVE_EBPF_JIT if !CPU_MICROMIPS && \ ++ !CPU_DADDI_WORKAROUNDS && \ ++ !CPU_R4000_WORKAROUNDS && \ ++ !CPU_R4400_WORKAROUNDS + select HAVE_EXIT_THREAD + select HAVE_FAST_GUP + select HAVE_FTRACE_MCOUNT_RECORD +--- a/arch/mips/net/Makefile ++++ b/arch/mips/net/Makefile +@@ -2,9 +2,10 @@ + # MIPS networking code + + obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o ++obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o + + ifeq ($(CONFIG_32BIT),y) +- obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp.o bpf_jit_comp32.o ++ obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp32.o + else +- obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o ++ obj-$(CONFIG_MIPS_EBPF_JIT) += bpf_jit_comp64.o + endif diff --git a/target/linux/generic/backport-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch b/target/linux/generic/backport-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch new file mode 100644 index 0000000000..e25c336831 --- /dev/null +++ b/target/linux/generic/backport-5.15/050-v5.16-06-mips-bpf-Remove-old-BPF-JIT-implementations.patch @@ -0,0 +1,387 @@ +From: Johan Almbladh +Date: Tue, 5 Oct 2021 18:54:08 +0200 +Subject: [PATCH] mips: bpf: Remove old BPF JIT implementations + +This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations. +They are replaced by a new eBPF implementation that supports both 32-bit +and 64-bit MIPS CPUs. + +Signed-off-by: Johan Almbladh +--- + delete mode 100644 arch/mips/net/bpf_jit.c + delete mode 100644 arch/mips/net/bpf_jit.h + delete mode 100644 arch/mips/net/bpf_jit_asm.S + delete mode 100644 arch/mips/net/ebpf_jit.c + +--- a/arch/mips/net/bpf_jit.h ++++ /dev/null +@@ -1,81 +0,0 @@ +-/* SPDX-License-Identifier: GPL-2.0-only */ +-/* +- * Just-In-Time compiler for BPF filters on MIPS +- * +- * Copyright (c) 2014 Imagination Technologies Ltd. +- * Author: Markos Chandras +- */ +- +-#ifndef BPF_JIT_MIPS_OP_H +-#define BPF_JIT_MIPS_OP_H +- +-/* Registers used by JIT */ +-#define MIPS_R_ZERO 0 +-#define MIPS_R_V0 2 +-#define MIPS_R_A0 4 +-#define MIPS_R_A1 5 +-#define MIPS_R_T4 12 +-#define MIPS_R_T5 13 +-#define MIPS_R_T6 14 +-#define MIPS_R_T7 15 +-#define MIPS_R_S0 16 +-#define MIPS_R_S1 17 +-#define MIPS_R_S2 18 +-#define MIPS_R_S3 19 +-#define MIPS_R_S4 20 +-#define MIPS_R_S5 21 +-#define MIPS_R_S6 22 +-#define MIPS_R_S7 23 +-#define MIPS_R_SP 29 +-#define MIPS_R_RA 31 +- +-/* Conditional codes */ +-#define MIPS_COND_EQ 0x1 +-#define MIPS_COND_GE (0x1 << 1) +-#define MIPS_COND_GT (0x1 << 2) +-#define MIPS_COND_NE (0x1 << 3) +-#define MIPS_COND_ALL (0x1 << 4) +-/* Conditionals on X register or K immediate */ +-#define MIPS_COND_X (0x1 << 5) +-#define MIPS_COND_K (0x1 << 6) +- +-#define r_ret MIPS_R_V0 +- +-/* +- * Use 2 scratch registers to avoid pipeline interlocks. +- * There is no overhead during epilogue and prologue since +- * any of the $s0-$s6 registers will only be preserved if +- * they are going to actually be used. +- */ +-#define r_skb_hl MIPS_R_S0 /* skb header length */ +-#define r_skb_data MIPS_R_S1 /* skb actual data */ +-#define r_off MIPS_R_S2 +-#define r_A MIPS_R_S3 +-#define r_X MIPS_R_S4 +-#define r_skb MIPS_R_S5 +-#define r_M MIPS_R_S6 +-#define r_skb_len MIPS_R_S7 +-#define r_s0 MIPS_R_T4 /* scratch reg 1 */ +-#define r_s1 MIPS_R_T5 /* scratch reg 2 */ +-#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */ +-#define r_tmp MIPS_R_T7 /* No need to preserve this */ +-#define r_zero MIPS_R_ZERO +-#define r_sp MIPS_R_SP +-#define r_ra MIPS_R_RA +- +-#ifndef __ASSEMBLY__ +- +-/* Declare ASM helpers */ +- +-#define DECLARE_LOAD_FUNC(func) \ +- extern u8 func(unsigned long *skb, int offset); \ +- extern u8 func##_negative(unsigned long *skb, int offset); \ +- extern u8 func##_positive(unsigned long *skb, int offset) +- +-DECLARE_LOAD_FUNC(sk_load_word); +-DECLARE_LOAD_FUNC(sk_load_half); +-DECLARE_LOAD_FUNC(sk_load_byte); +- +-#endif +- +-#endif /* BPF_JIT_MIPS_OP_H */ +--- a/arch/mips/net/bpf_jit_asm.S ++++ /dev/null +@@ -1,285 +0,0 @@ +-/* +- * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF +- * compiler. +- * +- * Copyright (C) 2015 Imagination Technologies Ltd. +- * Author: Markos Chandras +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; version 2 of the License. +- */ +- +-#include +-#include +-#include +-#include "bpf_jit.h" +- +-/* ABI +- * +- * r_skb_hl skb header length +- * r_skb_data skb data +- * r_off(a1) offset register +- * r_A BPF register A +- * r_X PF register X +- * r_skb(a0) *skb +- * r_M *scratch memory +- * r_skb_le skb length +- * r_s0 Scratch register 0 +- * r_s1 Scratch register 1 +- * +- * On entry: +- * a0: *skb +- * a1: offset (imm or imm + X) +- * +- * All non-BPF-ABI registers are free for use. On return, we only +- * care about r_ret. The BPF-ABI registers are assumed to remain +- * unmodified during the entire filter operation. +- */ +- +-#define skb a0 +-#define offset a1 +-#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */ +- +- /* We know better :) so prevent assembler reordering etc */ +- .set noreorder +- +-#define is_offset_negative(TYPE) \ +- /* If offset is negative we have more work to do */ \ +- slti t0, offset, 0; \ +- bgtz t0, bpf_slow_path_##TYPE##_neg; \ +- /* Be careful what follows in DS. */ +- +-#define is_offset_in_header(SIZE, TYPE) \ +- /* Reading from header? */ \ +- addiu $r_s0, $r_skb_hl, -SIZE; \ +- slt t0, $r_s0, offset; \ +- bgtz t0, bpf_slow_path_##TYPE; \ +- +-LEAF(sk_load_word) +- is_offset_negative(word) +-FEXPORT(sk_load_word_positive) +- is_offset_in_header(4, word) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- .set reorder +- lw $r_A, 0(t1) +- .set noreorder +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh t0, $r_A +- rotr $r_A, t0, 16 +-# else +- sll t0, $r_A, 24 +- srl t1, $r_A, 24 +- srl t2, $r_A, 8 +- or t0, t0, t1 +- andi t2, t2, 0xff00 +- andi t1, $r_A, 0xff00 +- or t0, t0, t2 +- sll t1, t1, 8 +- or $r_A, t0, t1 +-# endif +-#endif +- jr $r_ra +- move $r_ret, zero +- END(sk_load_word) +- +-LEAF(sk_load_half) +- is_offset_negative(half) +-FEXPORT(sk_load_half_positive) +- is_offset_in_header(2, half) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- lhu $r_A, 0(t1) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh $r_A, $r_A +-# else +- sll t0, $r_A, 8 +- srl t1, $r_A, 8 +- andi t0, t0, 0xff00 +- or $r_A, t0, t1 +-# endif +-#endif +- jr $r_ra +- move $r_ret, zero +- END(sk_load_half) +- +-LEAF(sk_load_byte) +- is_offset_negative(byte) +-FEXPORT(sk_load_byte_positive) +- is_offset_in_header(1, byte) +- /* Offset within header boundaries */ +- PTR_ADDU t1, $r_skb_data, offset +- lbu $r_A, 0(t1) +- jr $r_ra +- move $r_ret, zero +- END(sk_load_byte) +- +-/* +- * call skb_copy_bits: +- * (prototype in linux/skbuff.h) +- * +- * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len) +- * +- * o32 mandates we leave 4 spaces for argument registers in case +- * the callee needs to use them. Even though we don't care about +- * the argument registers ourselves, we need to allocate that space +- * to remain ABI compliant since the callee may want to use that space. +- * We also allocate 2 more spaces for $r_ra and our return register (*to). +- * +- * n64 is a bit different. The *caller* will allocate the space to preserve +- * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no +- * good reason but it does not matter that much really. +- * +- * (void *to) is returned in r_s0 +- * +- */ +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-#define DS_OFFSET(SIZE) (4 * SZREG) +-#else +-#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE)) +-#endif +-#define bpf_slow_path_common(SIZE) \ +- /* Quick check. Are we within reasonable boundaries? */ \ +- LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \ +- sltu $r_s0, offset, $r_s1; \ +- beqz $r_s0, fault; \ +- /* Load 4th argument in DS */ \ +- LONG_ADDIU a3, zero, SIZE; \ +- PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ +- PTR_LA t0, skb_copy_bits; \ +- PTR_S $r_ra, (5 * SZREG)($r_sp); \ +- /* Assign low slot to a2 */ \ +- PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \ +- jalr t0; \ +- /* Reset our destination slot (DS but it's ok) */ \ +- INT_S zero, (4 * SZREG)($r_sp); \ +- /* \ +- * skb_copy_bits returns 0 on success and -EFAULT \ +- * on error. Our data live in a2. Do not bother with \ +- * our data if an error has been returned. \ +- */ \ +- /* Restore our frame */ \ +- PTR_L $r_ra, (5 * SZREG)($r_sp); \ +- INT_L $r_s0, (4 * SZREG)($r_sp); \ +- bltz v0, fault; \ +- PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ +- move $r_ret, zero; \ +- +-NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) +- bpf_slow_path_common(4) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- wsbh t0, $r_s0 +- jr $r_ra +- rotr $r_A, t0, 16 +-# else +- sll t0, $r_s0, 24 +- srl t1, $r_s0, 24 +- srl t2, $r_s0, 8 +- or t0, t0, t1 +- andi t2, t2, 0xff00 +- andi t1, $r_s0, 0xff00 +- or t0, t0, t2 +- sll t1, t1, 8 +- jr $r_ra +- or $r_A, t0, t1 +-# endif +-#else +- jr $r_ra +- move $r_A, $r_s0 +-#endif +- +- END(bpf_slow_path_word) +- +-NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) +- bpf_slow_path_common(2) +-#ifdef CONFIG_CPU_LITTLE_ENDIAN +-# if MIPS_ISA_REV >= 2 +- jr $r_ra +- wsbh $r_A, $r_s0 +-# else +- sll t0, $r_s0, 8 +- andi t1, $r_s0, 0xff00 +- andi t0, t0, 0xff00 +- srl t1, t1, 8 +- jr $r_ra +- or $r_A, t0, t1 +-# endif +-#else +- jr $r_ra +- move $r_A, $r_s0 +-#endif +- +- END(bpf_slow_path_half) +- +-NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp) +- bpf_slow_path_common(1) +- jr $r_ra +- move $r_A, $r_s0 +- +- END(bpf_slow_path_byte) +- +-/* +- * Negative entry points +- */ +- .macro bpf_is_end_of_data +- li t0, SKF_LL_OFF +- /* Reading link layer data? */ +- slt t1, offset, t0 +- bgtz t1, fault +- /* Be careful what follows in DS. */ +- .endm +-/* +- * call skb_copy_bits: +- * (prototype in linux/filter.h) +- * +- * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, +- * int k, unsigned int size) +- * +- * see above (bpf_slow_path_common) for ABI restrictions +- */ +-#define bpf_negative_common(SIZE) \ +- PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ +- PTR_LA t0, bpf_internal_load_pointer_neg_helper; \ +- PTR_S $r_ra, (5 * SZREG)($r_sp); \ +- jalr t0; \ +- li a2, SIZE; \ +- PTR_L $r_ra, (5 * SZREG)($r_sp); \ +- /* Check return pointer */ \ +- beqz v0, fault; \ +- PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ +- /* Preserve our pointer */ \ +- move $r_s0, v0; \ +- /* Set return value */ \ +- move $r_ret, zero; \ +- +-bpf_slow_path_word_neg: +- bpf_is_end_of_data +-NESTED(sk_load_word_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(4) +- jr $r_ra +- lw $r_A, 0($r_s0) +- END(sk_load_word_negative) +- +-bpf_slow_path_half_neg: +- bpf_is_end_of_data +-NESTED(sk_load_half_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(2) +- jr $r_ra +- lhu $r_A, 0($r_s0) +- END(sk_load_half_negative) +- +-bpf_slow_path_byte_neg: +- bpf_is_end_of_data +-NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp) +- bpf_negative_common(1) +- jr $r_ra +- lbu $r_A, 0($r_s0) +- END(sk_load_byte_negative) +- +-fault: +- jr $r_ra +- addiu $r_ret, zero, 1 diff --git a/target/linux/generic/backport-5.15/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch b/target/linux/generic/backport-5.15/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch new file mode 100644 index 0000000000..b1f46e9af8 --- /dev/null +++ b/target/linux/generic/backport-5.15/071-crypto-arm-chacha-neon-optimize-for-non-block-size-m.patch @@ -0,0 +1,272 @@ +From 03662fcd41f4b764857f17b95f9a2a63c24bddd4 Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel +Date: Tue, 3 Nov 2020 17:28:09 +0100 +Subject: [PATCH 1/2] crypto: arm/chacha-neon - optimize for non-block size + multiples + +commit 86cd97ec4b943af35562a74688bc4e909b32c3d1 upstream. + +The current NEON based ChaCha implementation for ARM is optimized for +multiples of 4x the ChaCha block size (64 bytes). This makes sense for +block encryption, but given that ChaCha is also often used in the +context of networking, it makes sense to consider arbitrary length +inputs as well. + +For example, WireGuard typically uses 1420 byte packets, and performing +ChaCha encryption involves 5 invocations of chacha_4block_xor_neon() +and 3 invocations of chacha_block_xor_neon(), where the last one also +involves a memcpy() using a buffer on the stack to process the final +chunk of 1420 % 64 == 12 bytes. + +Let's optimize for this case as well, by letting chacha_4block_xor_neon() +deal with any input size between 64 and 256 bytes, using NEON permutation +instructions and overlapping loads and stores. This way, the 140 byte +tail of a 1420 byte input buffer can simply be processed in one go. + +This results in the following performance improvements for 1420 byte +blocks, without significant impact on power-of-2 input sizes. (Note +that Raspberry Pi is widely used in combination with a 32-bit kernel, +even though the core is 64-bit capable) + + Cortex-A8 (BeagleBone) : 7% + Cortex-A15 (Calxeda Midway) : 21% + Cortex-A53 (Raspberry Pi 3) : 3% + Cortex-A72 (Raspberry Pi 4) : 19% + +Cc: Eric Biggers +Cc: "Jason A . Donenfeld" +Signed-off-by: Ard Biesheuvel +Signed-off-by: Herbert Xu +Signed-off-by: Jason A. Donenfeld +--- + arch/arm/crypto/chacha-glue.c | 34 +++++------ + arch/arm/crypto/chacha-neon-core.S | 97 +++++++++++++++++++++++++++--- + 2 files changed, 107 insertions(+), 24 deletions(-) + +--- a/arch/arm/crypto/chacha-glue.c ++++ b/arch/arm/crypto/chacha-glue.c +@@ -23,7 +23,7 @@ + asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src, + int nrounds); + asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src, +- int nrounds); ++ int nrounds, unsigned int nbytes); + asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds); + asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds); + +@@ -42,24 +42,24 @@ static void chacha_doneon(u32 *state, u8 + { + u8 buf[CHACHA_BLOCK_SIZE]; + +- while (bytes >= CHACHA_BLOCK_SIZE * 4) { +- chacha_4block_xor_neon(state, dst, src, nrounds); +- bytes -= CHACHA_BLOCK_SIZE * 4; +- src += CHACHA_BLOCK_SIZE * 4; +- dst += CHACHA_BLOCK_SIZE * 4; +- state[12] += 4; +- } +- while (bytes >= CHACHA_BLOCK_SIZE) { +- chacha_block_xor_neon(state, dst, src, nrounds); +- bytes -= CHACHA_BLOCK_SIZE; +- src += CHACHA_BLOCK_SIZE; +- dst += CHACHA_BLOCK_SIZE; +- state[12]++; ++ while (bytes > CHACHA_BLOCK_SIZE) { ++ unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U); ++ ++ chacha_4block_xor_neon(state, dst, src, nrounds, l); ++ bytes -= l; ++ src += l; ++ dst += l; ++ state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE); + } + if (bytes) { +- memcpy(buf, src, bytes); +- chacha_block_xor_neon(state, buf, buf, nrounds); +- memcpy(dst, buf, bytes); ++ const u8 *s = src; ++ u8 *d = dst; ++ ++ if (bytes != CHACHA_BLOCK_SIZE) ++ s = d = memcpy(buf, src, bytes); ++ chacha_block_xor_neon(state, d, s, nrounds); ++ if (d != dst) ++ memcpy(dst, buf, bytes); + } + } + +--- a/arch/arm/crypto/chacha-neon-core.S ++++ b/arch/arm/crypto/chacha-neon-core.S +@@ -47,6 +47,7 @@ + */ + + #include ++#include + + .text + .fpu neon +@@ -205,7 +206,7 @@ ENDPROC(hchacha_block_neon) + + .align 5 + ENTRY(chacha_4block_xor_neon) +- push {r4-r5} ++ push {r4, lr} + mov r4, sp // preserve the stack pointer + sub ip, sp, #0x20 // allocate a 32 byte buffer + bic ip, ip, #0x1f // aligned to 32 bytes +@@ -229,10 +230,10 @@ ENTRY(chacha_4block_xor_neon) + vld1.32 {q0-q1}, [r0] + vld1.32 {q2-q3}, [ip] + +- adr r5, .Lctrinc ++ adr lr, .Lctrinc + vdup.32 q15, d7[1] + vdup.32 q14, d7[0] +- vld1.32 {q4}, [r5, :128] ++ vld1.32 {q4}, [lr, :128] + vdup.32 q13, d6[1] + vdup.32 q12, d6[0] + vdup.32 q11, d5[1] +@@ -455,7 +456,7 @@ ENTRY(chacha_4block_xor_neon) + + // Re-interleave the words in the first two rows of each block (x0..7). + // Also add the counter values 0-3 to x12[0-3]. +- vld1.32 {q8}, [r5, :128] // load counter values 0-3 ++ vld1.32 {q8}, [lr, :128] // load counter values 0-3 + vzip.32 q0, q1 // => (0 1 0 1) (0 1 0 1) + vzip.32 q2, q3 // => (2 3 2 3) (2 3 2 3) + vzip.32 q4, q5 // => (4 5 4 5) (4 5 4 5) +@@ -493,6 +494,8 @@ ENTRY(chacha_4block_xor_neon) + + // Re-interleave the words in the last two rows of each block (x8..15). + vld1.32 {q8-q9}, [sp, :256] ++ mov sp, r4 // restore original stack pointer ++ ldr r4, [r4, #8] // load number of bytes + vzip.32 q12, q13 // => (12 13 12 13) (12 13 12 13) + vzip.32 q14, q15 // => (14 15 14 15) (14 15 14 15) + vzip.32 q8, q9 // => (8 9 8 9) (8 9 8 9) +@@ -520,41 +523,121 @@ ENTRY(chacha_4block_xor_neon) + // XOR the rest of the data with the keystream + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #96 + veor q0, q0, q8 + veor q1, q1, q12 ++ ble .Lle96 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #32 + veor q0, q0, q2 + veor q1, q1, q6 ++ ble .Lle128 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #32 + veor q0, q0, q10 + veor q1, q1, q14 ++ ble .Lle160 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #32 + veor q0, q0, q4 + veor q1, q1, q5 ++ ble .Lle192 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #32 + veor q0, q0, q9 + veor q1, q1, q13 ++ ble .Lle224 + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2]! ++ subs r4, r4, #32 + veor q0, q0, q3 + veor q1, q1, q7 ++ blt .Llt256 ++.Lout: + vst1.8 {q0-q1}, [r1]! + + vld1.8 {q0-q1}, [r2] +- mov sp, r4 // restore original stack pointer + veor q0, q0, q11 + veor q1, q1, q15 + vst1.8 {q0-q1}, [r1] + +- pop {r4-r5} +- bx lr ++ pop {r4, pc} ++ ++.Lle192: ++ vmov q4, q9 ++ vmov q5, q13 ++ ++.Lle160: ++ // nothing to do ++ ++.Lfinalblock: ++ // Process the final block if processing less than 4 full blocks. ++ // Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the ++ // previous 32 byte output block that still needs to be written at ++ // [r1] in q0-q1. ++ beq .Lfullblock ++ ++.Lpartialblock: ++ adr lr, .Lpermute + 32 ++ add r2, r2, r4 ++ add lr, lr, r4 ++ add r4, r4, r1 ++ ++ vld1.8 {q2-q3}, [lr] ++ vld1.8 {q6-q7}, [r2] ++ ++ add r4, r4, #32 ++ ++ vtbl.8 d4, {q4-q5}, d4 ++ vtbl.8 d5, {q4-q5}, d5 ++ vtbl.8 d6, {q4-q5}, d6 ++ vtbl.8 d7, {q4-q5}, d7 ++ ++ veor q6, q6, q2 ++ veor q7, q7, q3 ++ ++ vst1.8 {q6-q7}, [r4] // overlapping stores ++ vst1.8 {q0-q1}, [r1] ++ pop {r4, pc} ++ ++.Lfullblock: ++ vmov q11, q4 ++ vmov q15, q5 ++ b .Lout ++.Lle96: ++ vmov q4, q2 ++ vmov q5, q6 ++ b .Lfinalblock ++.Lle128: ++ vmov q4, q10 ++ vmov q5, q14 ++ b .Lfinalblock ++.Lle224: ++ vmov q4, q3 ++ vmov q5, q7 ++ b .Lfinalblock ++.Llt256: ++ vmov q4, q11 ++ vmov q5, q15 ++ b .Lpartialblock + ENDPROC(chacha_4block_xor_neon) ++ ++ .align L1_CACHE_SHIFT ++.Lpermute: ++ .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 ++ .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f ++ .byte 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17 ++ .byte 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f ++ .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 ++ .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f ++ .byte 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17 ++ .byte 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f diff --git a/target/linux/generic/backport-5.15/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch b/target/linux/generic/backport-5.15/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch new file mode 100644 index 0000000000..1e4d2041e5 --- /dev/null +++ b/target/linux/generic/backport-5.15/072-crypto-arm-chacha-neon-add-missing-counter-increment.patch @@ -0,0 +1,38 @@ +From 7f63462faf9eab69132bea9abd48c2c05a93145b Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel +Date: Sun, 13 Dec 2020 15:39:29 +0100 +Subject: [PATCH 2/2] crypto: arm/chacha-neon - add missing counter increment + +commit fd16931a2f518a32753920ff20895e5cf04c8ff1 upstream. + +Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block +size multiples") refactored the chacha block handling in the glue code in +a way that may result in the counter increment to be omitted when calling +chacha_block_xor_neon() to process a full block. This violates the skcipher +API, which requires that the output IV is suitable for handling more input +as long as the preceding input has been presented in round multiples of the +block size. Also, the same code is exposed via the chacha library interface +whose callers may actually rely on this increment to occur even for final +blocks that are smaller than the chacha block size. + +So increment the counter after calling chacha_block_xor_neon(). + +Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") +Reported-by: Eric Biggers +Signed-off-by: Ard Biesheuvel +Signed-off-by: Herbert Xu +Signed-off-by: Jason A. Donenfeld +--- + arch/arm/crypto/chacha-glue.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/crypto/chacha-glue.c ++++ b/arch/arm/crypto/chacha-glue.c +@@ -60,6 +60,7 @@ static void chacha_doneon(u32 *state, u8 + chacha_block_xor_neon(state, d, s, nrounds); + if (d != dst) + memcpy(dst, buf, bytes); ++ state[12]++; + } + } + diff --git a/target/linux/generic/backport-5.15/080-wireguard-peer-put-frequently-used-members-above-cac.patch b/target/linux/generic/backport-5.15/080-wireguard-peer-put-frequently-used-members-above-cac.patch new file mode 100644 index 0000000000..444fd677b4 --- /dev/null +++ b/target/linux/generic/backport-5.15/080-wireguard-peer-put-frequently-used-members-above-cac.patch @@ -0,0 +1,42 @@ +From a13827e9091c07e25cdeec9a402d74a27e2a1111 Mon Sep 17 00:00:00 2001 +From: "Jason A. Donenfeld" +Date: Mon, 22 Feb 2021 17:25:46 +0100 +Subject: [PATCH] wireguard: peer: put frequently used members above cache + lines + +commit 5a0598695634a6bb4126818902dd9140cd9df8b6 upstream. + +The is_dead boolean is checked for every single packet, while the +internal_id member is used basically only for pr_debug messages. So it +makes sense to hoist up is_dead into some space formerly unused by a +struct hole, while demoting internal_api to below the lowest struct +cache line. + +Signed-off-by: Jason A. Donenfeld +Signed-off-by: Jakub Kicinski +Signed-off-by: Jason A. Donenfeld +--- + drivers/net/wireguard/peer.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/wireguard/peer.h ++++ b/drivers/net/wireguard/peer.h +@@ -39,6 +39,7 @@ struct wg_peer { + struct prev_queue tx_queue, rx_queue; + struct sk_buff_head staged_packet_queue; + int serial_work_cpu; ++ bool is_dead; + struct noise_keypairs keypairs; + struct endpoint endpoint; + struct dst_cache endpoint_cache; +@@ -61,9 +62,8 @@ struct wg_peer { + struct rcu_head rcu; + struct list_head peer_list; + struct list_head allowedips_list; +- u64 internal_id; + struct napi_struct napi; +- bool is_dead; ++ u64 internal_id; + }; + + struct wg_peer *wg_peer_create(struct wg_device *wg, diff --git a/target/linux/generic/backport-5.15/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch b/target/linux/generic/backport-5.15/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch new file mode 100644 index 0000000000..6e274acb1f --- /dev/null +++ b/target/linux/generic/backport-5.15/081-net-next-regmap-allow-to-define-reg_update_bits-for-no-bus.patch @@ -0,0 +1,52 @@ +From 02d6fdecb9c38de19065f6bed8d5214556fd061d Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 4 Nov 2021 16:00:40 +0100 +Subject: regmap: allow to define reg_update_bits for no bus configuration + +Some device requires a special handling for reg_update_bits and can't use +the normal regmap read write logic. An example is when locking is +handled by the device and rmw operations requires to do atomic operations. +Allow to declare a dedicated function in regmap_config for +reg_update_bits in no bus configuration. + +Signed-off-by: Ansuel Smith +Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com +Signed-off-by: Mark Brown +--- + drivers/base/regmap/regmap.c | 1 + + include/linux/regmap.h | 7 +++++++ + 2 files changed, 8 insertions(+) + +--- a/drivers/base/regmap/regmap.c ++++ b/drivers/base/regmap/regmap.c +@@ -842,6 +842,7 @@ struct regmap *__regmap_init(struct devi + if (!bus) { + map->reg_read = config->reg_read; + map->reg_write = config->reg_write; ++ map->reg_update_bits = config->reg_update_bits; + + map->defer_caching = false; + goto skip_format_initialization; +--- a/include/linux/regmap.h ++++ b/include/linux/regmap.h +@@ -289,6 +289,11 @@ typedef void (*regmap_unlock)(void *); + * read operation on a bus such as SPI, I2C, etc. Most of the + * devices do not need this. + * @reg_write: Same as above for writing. ++ * @reg_update_bits: Optional callback that if filled will be used to perform ++ * all the update_bits(rmw) operation. Should only be provided ++ * if the function require special handling with lock and reg ++ * handling and the operation cannot be represented as a simple ++ * update_bits operation on a bus such as SPI, I2C, etc. + * @fast_io: Register IO is fast. Use a spinlock instead of a mutex + * to perform locking. This field is ignored if custom lock/unlock + * functions are used (see fields lock/unlock of struct regmap_config). +@@ -366,6 +371,8 @@ struct regmap_config { + + int (*reg_read)(void *context, unsigned int reg, unsigned int *val); + int (*reg_write)(void *context, unsigned int reg, unsigned int val); ++ int (*reg_update_bits)(void *context, unsigned int reg, ++ unsigned int mask, unsigned int val); + + bool fast_io; + diff --git a/target/linux/generic/backport-5.15/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch b/target/linux/generic/backport-5.15/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch new file mode 100644 index 0000000000..fafe530ac5 --- /dev/null +++ b/target/linux/generic/backport-5.15/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch @@ -0,0 +1,36 @@ +From 6523061868212473f63812a0c477a161742bed42 Mon Sep 17 00:00:00 2001 +From: "Jason A. Donenfeld" +Date: Sat, 27 Feb 2021 13:20:24 +0100 +Subject: [PATCH] MIPS: select CPU_MIPS64 for remaining MIPS64 CPUs + +The CPU_MIPS64 and CPU_MIPS32 variables are supposed to be able to +distinguish broadly between 64-bit and 32-bit MIPS CPUs. However, they +weren't selected by the specialty CPUs, Octeon and Loongson, which meant +it was possible to hit a weird state of: + + MIPS=y, CONFIG_64BIT=y, CPU_MIPS64=n + +This commit rectifies the issue by having CPU_MIPS64 be selected when +the missing Octeon or Loongson models are selected. + +Cc: Thomas Bogendoerfer +Cc: Ralf Baechle +Cc: George Cherian +Cc: Huacai Chen +Cc: Jiaxun Yang +Signed-off-by: Jason A. Donenfeld +--- + arch/mips/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -2088,7 +2088,7 @@ config CPU_MIPS32 + config CPU_MIPS64 + bool + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \ +- CPU_MIPS64_R6 ++ CPU_MIPS64_R6 || CPU_LOONGSON64 || CPU_CAVIUM_OCTEON + + # + # These indicate the revision of the architecture diff --git a/target/linux/generic/backport-5.15/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch b/target/linux/generic/backport-5.15/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch new file mode 100644 index 0000000000..3f8808f702 --- /dev/null +++ b/target/linux/generic/backport-5.15/311-v5.11-MIPS-zboot-put-appended-dtb-into-a-section.patch @@ -0,0 +1,36 @@ +From 7d1531c81c0fb4c93bea8dc316043ad0e4d0c270 Mon Sep 17 00:00:00 2001 +From: Chuanhong Guo +Date: Sun, 25 Oct 2020 23:19:40 +0800 +Subject: [PATCH] MIPS: zboot: put appended dtb into a section + +This will make a separated section for dtb appear in ELF, and we can +then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB +is set in kernel config. + +command to patch a dtb: +objcopy --set-section-flags=.appended_dtb=alloc,contents \ + --update-section=.appended_dtb=.dtb vmlinuz vmlinuz-dtb + +Signed-off-by: Chuanhong Guo +--- + arch/mips/boot/compressed/ld.script | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +--- a/arch/mips/boot/compressed/ld.script ++++ b/arch/mips/boot/compressed/ld.script +@@ -31,9 +31,12 @@ SECTIONS + CONSTRUCTORS + . = ALIGN(16); + } +- __appended_dtb = .; +- /* leave space for appended DTB */ +- . += 0x100000; ++ ++ .appended_dtb : { ++ __appended_dtb = .; ++ /* leave space for appended DTB */ ++ . += 0x100000; ++ } + + _edata = .; + /* End of data section */ diff --git a/target/linux/generic/backport-5.15/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/backport-5.15/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch new file mode 100644 index 0000000000..d300af3342 --- /dev/null +++ b/target/linux/generic/backport-5.15/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch @@ -0,0 +1,106 @@ +From: Pablo Neira Ayuso +Date: Thu, 25 Jan 2018 12:58:55 +0100 +Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from + nf_flow_table + +Move the code that deals with device events to the core. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -576,13 +576,41 @@ void nf_flow_table_free(struct nf_flowta + } + EXPORT_SYMBOL_GPL(nf_flow_table_free); + ++static int nf_flow_table_netdev_event(struct notifier_block *this, ++ unsigned long event, void *ptr) ++{ ++ struct net_device *dev = netdev_notifier_info_to_dev(ptr); ++ ++ if (event != NETDEV_DOWN) ++ return NOTIFY_DONE; ++ ++ nf_flow_table_cleanup(dev); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block flow_offload_netdev_notifier = { ++ .notifier_call = nf_flow_table_netdev_event, ++}; ++ + static int __init nf_flow_table_module_init(void) + { +- return nf_flow_table_offload_init(); ++ int ret; ++ ++ ret = nf_flow_table_offload_init(); ++ if (ret) ++ return ret; ++ ++ ret = register_netdevice_notifier(&flow_offload_netdev_notifier); ++ if (ret) ++ nf_flow_table_offload_exit(); ++ ++ return ret; + } + + static void __exit nf_flow_table_module_exit(void) + { ++ unregister_netdevice_notifier(&flow_offload_netdev_notifier); + nf_flow_table_offload_exit(); + } + +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -237,47 +237,14 @@ static struct nft_expr_type nft_flow_off + .owner = THIS_MODULE, + }; + +-static int flow_offload_netdev_event(struct notifier_block *this, +- unsigned long event, void *ptr) +-{ +- struct net_device *dev = netdev_notifier_info_to_dev(ptr); +- +- if (event != NETDEV_DOWN) +- return NOTIFY_DONE; +- +- nf_flow_table_cleanup(dev); +- +- return NOTIFY_DONE; +-} +- +-static struct notifier_block flow_offload_netdev_notifier = { +- .notifier_call = flow_offload_netdev_event, +-}; +- + static int __init nft_flow_offload_module_init(void) + { +- int err; +- +- err = register_netdevice_notifier(&flow_offload_netdev_notifier); +- if (err) +- goto err; +- +- err = nft_register_expr(&nft_flow_offload_type); +- if (err < 0) +- goto register_expr; +- +- return 0; +- +-register_expr: +- unregister_netdevice_notifier(&flow_offload_netdev_notifier); +-err: +- return err; ++ return nft_register_expr(&nft_flow_offload_type); + } + + static void __exit nft_flow_offload_module_exit(void) + { + nft_unregister_expr(&nft_flow_offload_type); +- unregister_netdevice_notifier(&flow_offload_netdev_notifier); + } + + module_init(nft_flow_offload_module_init); diff --git a/target/linux/generic/backport-5.15/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch b/target/linux/generic/backport-5.15/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch new file mode 100644 index 0000000000..8aded43526 --- /dev/null +++ b/target/linux/generic/backport-5.15/401-v5.11-dt-bindings-mtd-convert-fixed-partitions-to-the-json.patch @@ -0,0 +1,324 @@ +From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 10 Dec 2020 18:23:52 +0100 +Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the + json-schema +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This standardizes its documentation, allows validating with Makefile +checks and helps writing DTS files. + +Noticeable changes: +1. Dropped "Partitions can be represented by sub-nodes of a flash + device." as we also support subpartitions (don't have to be part of + flash device node) +2. Dropped "to Linux" as bindings are meant to be os agnostic. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com +Signed-off-by: Rob Herring +--- + .../devicetree/bindings/mtd/partition.txt | 131 +-------------- + .../mtd/partitions/fixed-partitions.yaml | 152 ++++++++++++++++++ + 2 files changed, 154 insertions(+), 129 deletions(-) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml + +--- a/Documentation/devicetree/bindings/mtd/partition.txt ++++ b/Documentation/devicetree/bindings/mtd/partition.txt +@@ -24,137 +24,10 @@ another partitioning method. + Available bindings are listed in the "partitions" subdirectory. + + +-Fixed Partitions +-================ +- +-Partitions can be represented by sub-nodes of a flash device. This can be used +-on platforms which have strong conventions about which portions of a flash are +-used for what purposes, but which don't use an on-flash partition table such +-as RedBoot. +- +-The partition table should be a subnode of the flash node and should be named +-'partitions'. This node should have the following property: +-- compatible : (required) must be "fixed-partitions" +-Partitions are then defined in subnodes of the partitions node. ++Deprecated: partitions defined in flash node ++============================================ + + For backwards compatibility partitions as direct subnodes of the flash device are + supported. This use is discouraged. + NOTE: also for backwards compatibility, direct subnodes that have a compatible + string are not considered partitions, as they may be used for other bindings. +- +-#address-cells & #size-cells must both be present in the partitions subnode of the +-flash device. There are two valid values for both: +-<1>: for partitions that require a single 32-bit cell to represent their +- size/address (aka the value is below 4 GiB) +-<2>: for partitions that require two 32-bit cells to represent their +- size/address (aka the value is 4 GiB or greater). +- +-Required properties: +-- reg : The partition's offset and size within the flash +- +-Optional properties: +-- label : The label / name for this partition. If omitted, the label is taken +- from the node name (excluding the unit address). +-- read-only : This parameter, if present, is a hint to Linux that this +- partition should only be mounted read-only. This is usually used for flash +- partitions containing early-boot firmware images or data which should not be +- clobbered. +-- lock : Do not unlock the partition at initialization time (not supported on +- all devices) +-- slc-mode: This parameter, if present, allows one to emulate SLC mode on a +- partition attached to an MLC NAND thus making this partition immune to +- paired-pages corruptions +- +-Examples: +- +- +-flash@0 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "u-boot"; +- reg = <0x0000000 0x100000>; +- read-only; +- }; +- +- uimage@100000 { +- reg = <0x0100000 0x200000>; +- }; +- }; +-}; +- +-flash@1 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <2>; +- +- /* a 4 GiB partition */ +- partition@0 { +- label = "filesystem"; +- reg = <0x00000000 0x1 0x00000000>; +- }; +- }; +-}; +- +-flash@2 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <2>; +- #size-cells = <2>; +- +- /* an 8 GiB partition */ +- partition@0 { +- label = "filesystem #1"; +- reg = <0x0 0x00000000 0x2 0x00000000>; +- }; +- +- /* a 4 GiB partition */ +- partition@200000000 { +- label = "filesystem #2"; +- reg = <0x2 0x00000000 0x1 0x00000000>; +- }; +- }; +-}; +- +-flash@3 { +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "bootloader"; +- reg = <0x000000 0x100000>; +- read-only; +- }; +- +- firmware@100000 { +- label = "firmware"; +- reg = <0x100000 0xe00000>; +- compatible = "brcm,trx"; +- }; +- +- calibration@f00000 { +- label = "calibration"; +- reg = <0xf00000 0x100000>; +- compatible = "fixed-partitions"; +- ranges = <0 0xf00000 0x100000>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "wifi0"; +- reg = <0x000000 0x080000>; +- }; +- +- partition@80000 { +- label = "wifi1"; +- reg = <0x080000 0x080000>; +- }; +- }; +- }; +-}; +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml +@@ -0,0 +1,152 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Fixed partitions ++ ++description: | ++ This binding can be used on platforms which have strong conventions about ++ which portions of a flash are used for what purposes, but which don't use an ++ on-flash partition table such as RedBoot. ++ ++ The partition table should be a node named "partitions". Partitions are then ++ defined as subnodes. ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ compatible: ++ const: fixed-partitions ++ ++ "#address-cells": true ++ ++ "#size-cells": true ++ ++patternProperties: ++ "@[0-9a-f]+$": ++ description: node describing a single flash partition ++ type: object ++ ++ properties: ++ reg: ++ description: partition's offset and size within the flash ++ maxItems: 1 ++ ++ label: ++ description: The label / name for this partition. If omitted, the label ++ is taken from the node name (excluding the unit address). ++ ++ read-only: ++ description: This parameter, if present, is a hint that this partition ++ should only be mounted read-only. This is usually used for flash ++ partitions containing early-boot firmware images or data which should ++ not be clobbered. ++ type: boolean ++ ++ lock: ++ description: Do not unlock the partition at initialization time (not ++ supported on all devices) ++ type: boolean ++ ++ slc-mode: ++ description: This parameter, if present, allows one to emulate SLC mode ++ on a partition attached to an MLC NAND thus making this partition ++ immune to paired-pages corruptions ++ type: boolean ++ ++ required: ++ - reg ++ ++required: ++ - "#address-cells" ++ - "#size-cells" ++ ++additionalProperties: true ++ ++examples: ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; ++ read-only; ++ }; ++ ++ uimage@100000 { ++ reg = <0x0100000 0x200000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <2>; ++ ++ /* a 4 GiB partition */ ++ partition@0 { ++ label = "filesystem"; ++ reg = <0x00000000 0x1 0x00000000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ /* an 8 GiB partition */ ++ partition@0 { ++ label = "filesystem #1"; ++ reg = <0x0 0x00000000 0x2 0x00000000>; ++ }; ++ ++ /* a 4 GiB partition */ ++ partition@200000000 { ++ label = "filesystem #2"; ++ reg = <0x2 0x00000000 0x1 0x00000000>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bootloader"; ++ reg = <0x000000 0x100000>; ++ read-only; ++ }; ++ ++ firmware@100000 { ++ compatible = "brcm,trx"; ++ label = "firmware"; ++ reg = <0x100000 0xe00000>; ++ }; ++ ++ calibration@f00000 { ++ compatible = "fixed-partitions"; ++ label = "calibration"; ++ reg = <0xf00000 0x100000>; ++ ranges = <0 0xf00000 0x100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "wifi0"; ++ reg = <0x000000 0x080000>; ++ }; ++ ++ partition@80000 { ++ label = "wifi1"; ++ reg = <0x080000 0x080000>; ++ }; ++ }; ++ }; diff --git a/target/linux/generic/backport-5.15/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch b/target/linux/generic/backport-5.15/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch new file mode 100644 index 0000000000..f3b1179ecd --- /dev/null +++ b/target/linux/generic/backport-5.15/402-v5.12-0001-dt-bindings-mtd-move-partition-binding-to-its-own-fi.patch @@ -0,0 +1,115 @@ +From 6418522022c706fd867b00b2571edba48b8fa8c7 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 11 Feb 2021 23:04:25 +0100 +Subject: [PATCH] dt-bindings: mtd: move partition binding to its own file +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Single partition binding is quite common and may be: +1. Used by multiple parsers +2. Extended for more specific cases + +Move it to separated file to avoid code duplication. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Rob Herring +Signed-off-by: Richard Weinberger +--- + .../mtd/partitions/fixed-partitions.yaml | 33 +------------ + .../bindings/mtd/partitions/partition.yaml | 47 +++++++++++++++++++ + 2 files changed, 48 insertions(+), 32 deletions(-) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml + +--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml ++++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml +@@ -27,38 +27,7 @@ properties: + + patternProperties: + "@[0-9a-f]+$": +- description: node describing a single flash partition +- type: object +- +- properties: +- reg: +- description: partition's offset and size within the flash +- maxItems: 1 +- +- label: +- description: The label / name for this partition. If omitted, the label +- is taken from the node name (excluding the unit address). +- +- read-only: +- description: This parameter, if present, is a hint that this partition +- should only be mounted read-only. This is usually used for flash +- partitions containing early-boot firmware images or data which should +- not be clobbered. +- type: boolean +- +- lock: +- description: Do not unlock the partition at initialization time (not +- supported on all devices) +- type: boolean +- +- slc-mode: +- description: This parameter, if present, allows one to emulate SLC mode +- on a partition attached to an MLC NAND thus making this partition +- immune to paired-pages corruptions +- type: boolean +- +- required: +- - reg ++ $ref: "partition.yaml#" + + required: + - "#address-cells" +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +@@ -0,0 +1,47 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Partition ++ ++description: | ++ This binding describes a single flash partition. Each partition must have its ++ relative offset and size specified. Depending on partition function extra ++ properties can be used. ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ reg: ++ description: partition's offset and size within the flash ++ maxItems: 1 ++ ++ label: ++ description: The label / name for this partition. If omitted, the label ++ is taken from the node name (excluding the unit address). ++ ++ read-only: ++ description: This parameter, if present, is a hint that this partition ++ should only be mounted read-only. This is usually used for flash ++ partitions containing early-boot firmware images or data which should ++ not be clobbered. ++ type: boolean ++ ++ lock: ++ description: Do not unlock the partition at initialization time (not ++ supported on all devices) ++ type: boolean ++ ++ slc-mode: ++ description: This parameter, if present, allows one to emulate SLC mode ++ on a partition attached to an MLC NAND thus making this partition ++ immune to paired-pages corruptions ++ type: boolean ++ ++required: ++ - reg ++ ++additionalProperties: true diff --git a/target/linux/generic/backport-5.15/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch b/target/linux/generic/backport-5.15/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch new file mode 100644 index 0000000000..8576c7d78d --- /dev/null +++ b/target/linux/generic/backport-5.15/402-v5.12-0002-dt-bindings-mtd-add-binding-for-BCM4908-partitions.patch @@ -0,0 +1,92 @@ +From 6e9dff6fe3fbc452f16566e4a7e293b0decefdba Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 11 Feb 2021 23:04:26 +0100 +Subject: [PATCH] dt-bindings: mtd: add binding for BCM4908 partitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 uses fixed partitions layout but function of some partitions may +vary. Some devices use multiple firmware partitions and those partitions +should be marked to let system discover their purpose. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Richard Weinberger +--- + .../partitions/brcm,bcm4908-partitions.yaml | 70 +++++++++++++++++++ + 1 file changed, 70 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml +@@ -0,0 +1,70 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom BCM4908 partitioning ++ ++description: | ++ Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used ++ for regular booting, the other is treated as fallback. ++ ++ This binding allows defining all fixed partitions and marking those containing ++ firmware. System can use that information e.g. for booting or flashing ++ purposes. ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ compatible: ++ const: brcm,bcm4908-partitions ++ ++ "#address-cells": ++ enum: [ 1, 2 ] ++ ++ "#size-cells": ++ enum: [ 1, 2 ] ++ ++patternProperties: ++ "^partition@[0-9a-f]+$": ++ $ref: "partition.yaml#" ++ properties: ++ compatible: ++ const: brcm,bcm4908-firmware ++ unevaluatedProperties: false ++ ++required: ++ - "#address-cells" ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ partitions { ++ compatible = "brcm,bcm4908-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x100000 0xf00000>; ++ }; ++ ++ partition@1000000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x1000000 0xf00000>; ++ }; ++ ++ partition@1f00000 { ++ label = "calibration"; ++ reg = <0x1f00000 0x100000>; ++ }; ++ }; diff --git a/target/linux/generic/backport-5.15/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch b/target/linux/generic/backport-5.15/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch new file mode 100644 index 0000000000..d3891228e2 --- /dev/null +++ b/target/linux/generic/backport-5.15/403-v5.13-mtd-parsers-ofpart-support-BCM4908-fixed-partitions.patch @@ -0,0 +1,654 @@ +From afbef8efb591792579c633a7c545f914c6165f82 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 11 Feb 2021 23:04:27 +0100 +Subject: [PATCH] mtd: parsers: ofpart: support BCM4908 fixed partitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Some devices use fixed partitioning with some partitions requiring some +extra logic. E.g. BCM4908 may have multiple firmware partitions but +detecting currently used one requires checking bootloader parameters. + +To support such cases without duplicating a lot of code (without copying +most of the ofpart.c code) support for post-parsing callback was added. + +BCM4908 support in ofpart can be enabled using config option and results +in compiling & executing a specific callback. It simply reads offset of +currently used firmware partition from the DT. Bootloader specifies it +using the "brcm_blparms" property. + +Signed-off-by: Rafał Miłecki +--- + drivers/mtd/parsers/Kconfig | 9 +++ + drivers/mtd/parsers/Makefile | 2 + + drivers/mtd/parsers/ofpart_bcm4908.c | 64 +++++++++++++++++++ + drivers/mtd/parsers/ofpart_bcm4908.h | 15 +++++ + .../mtd/parsers/{ofpart.c => ofpart_core.c} | 28 +++++++- + 5 files changed, 116 insertions(+), 2 deletions(-) + create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.c + create mode 100644 drivers/mtd/parsers/ofpart_bcm4908.h + rename drivers/mtd/parsers/{ofpart.c => ofpart_core.c} (88%) + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -67,6 +67,15 @@ config MTD_OF_PARTS + flash memory node, as described in + Documentation/devicetree/bindings/mtd/partition.txt. + ++config MTD_OF_PARTS_BCM4908 ++ bool "BCM4908 partitioning support" ++ depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST) ++ default ARCH_BCM4908 ++ help ++ This provides partitions parser for BCM4908 family devices ++ that can have multiple "firmware" partitions. It takes care of ++ finding currently used one and backup ones. ++ + config MTD_PARSER_IMAGETAG + tristate "Parser for BCM963XX Image Tag format partitions" + depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -4,6 +4,8 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm4 + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o ++ofpart-y += ofpart_core.o ++ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o + obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o +--- /dev/null ++++ b/drivers/mtd/parsers/ofpart_bcm4908.c +@@ -0,0 +1,64 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (C) 2021 Rafał Miłecki ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ofpart_bcm4908.h" ++ ++#define BLPARAMS_FW_OFFSET "NAND_RFS_OFS" ++ ++static long long bcm4908_partitions_fw_offset(void) ++{ ++ struct device_node *root; ++ struct property *prop; ++ const char *s; ++ ++ root = of_find_node_by_path("/"); ++ if (!root) ++ return -ENOENT; ++ ++ of_property_for_each_string(root, "brcm_blparms", prop, s) { ++ size_t len = strlen(BLPARAMS_FW_OFFSET); ++ unsigned long offset; ++ int err; ++ ++ if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=') ++ continue; ++ ++ err = kstrtoul(s + len + 1, 0, &offset); ++ if (err) { ++ pr_err("failed to parse %s\n", s + len + 1); ++ return err; ++ } ++ ++ return offset << 10; ++ } ++ ++ return -ENOENT; ++} ++ ++int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts) ++{ ++ long long fw_offset; ++ int i; ++ ++ fw_offset = bcm4908_partitions_fw_offset(); ++ ++ for (i = 0; i < nr_parts; i++) { ++ if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) { ++ if (fw_offset < 0 || parts[i].offset == fw_offset) ++ parts[i].name = "firmware"; ++ else ++ parts[i].name = "backup"; ++ } ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/mtd/parsers/ofpart_bcm4908.h +@@ -0,0 +1,15 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++#ifndef __BCM4908_PARTITIONS_H ++#define __BCM4908_PARTITIONS_H ++ ++#ifdef CONFIG_MTD_OF_PARTS_BCM4908 ++int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts); ++#else ++static inline int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, ++ int nr_parts) ++{ ++ return -EOPNOTSUPP; ++} ++#endif ++ ++#endif +--- a/drivers/mtd/parsers/ofpart.c ++++ /dev/null +@@ -1,239 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later +-/* +- * Flash partitions described by the OF (or flattened) device tree +- * +- * Copyright © 2006 MontaVista Software Inc. +- * Author: Vitaly Wool +- * +- * Revised to handle newer style flash binding by: +- * Copyright © 2007 David Gibson, IBM Corporation. +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +- +-static bool node_has_compatible(struct device_node *pp) +-{ +- return of_get_property(pp, "compatible", NULL); +-} +- +-static int parse_fixed_partitions(struct mtd_info *master, +- const struct mtd_partition **pparts, +- struct mtd_part_parser_data *data) +-{ +- struct mtd_partition *parts; +- struct device_node *mtd_node; +- struct device_node *ofpart_node; +- const char *partname; +- struct device_node *pp; +- int nr_parts, i, ret = 0; +- bool dedicated = true; +- +- +- /* Pull of_node from the master device node */ +- mtd_node = mtd_get_of_node(master); +- if (!mtd_node) +- return 0; +- +- ofpart_node = of_get_child_by_name(mtd_node, "partitions"); +- if (!ofpart_node) { +- /* +- * We might get here even when ofpart isn't used at all (e.g., +- * when using another parser), so don't be louder than +- * KERN_DEBUG +- */ +- pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n", +- master->name, mtd_node); +- ofpart_node = mtd_node; +- dedicated = false; +- } else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) { +- /* The 'partitions' subnode might be used by another parser */ +- return 0; +- } +- +- /* First count the subnodes */ +- nr_parts = 0; +- for_each_child_of_node(ofpart_node, pp) { +- if (!dedicated && node_has_compatible(pp)) +- continue; +- +- nr_parts++; +- } +- +- if (nr_parts == 0) +- return 0; +- +- parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); +- if (!parts) +- return -ENOMEM; +- +- i = 0; +- for_each_child_of_node(ofpart_node, pp) { +- const __be32 *reg; +- int len; +- int a_cells, s_cells; +- +- if (!dedicated && node_has_compatible(pp)) +- continue; +- +- reg = of_get_property(pp, "reg", &len); +- if (!reg) { +- if (dedicated) { +- pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n", +- master->name, pp, +- mtd_node); +- goto ofpart_fail; +- } else { +- nr_parts--; +- continue; +- } +- } +- +- a_cells = of_n_addr_cells(pp); +- s_cells = of_n_size_cells(pp); +- if (len / 4 != a_cells + s_cells) { +- pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n", +- master->name, pp, +- mtd_node); +- goto ofpart_fail; +- } +- +- parts[i].offset = of_read_number(reg, a_cells); +- parts[i].size = of_read_number(reg + a_cells, s_cells); +- parts[i].of_node = pp; +- +- partname = of_get_property(pp, "label", &len); +- if (!partname) +- partname = of_get_property(pp, "name", &len); +- parts[i].name = partname; +- +- if (of_get_property(pp, "read-only", &len)) +- parts[i].mask_flags |= MTD_WRITEABLE; +- +- if (of_get_property(pp, "lock", &len)) +- parts[i].mask_flags |= MTD_POWERUP_LOCK; +- +- if (of_property_read_bool(pp, "slc-mode")) +- parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION; +- +- i++; +- } +- +- if (!nr_parts) +- goto ofpart_none; +- +- *pparts = parts; +- return nr_parts; +- +-ofpart_fail: +- pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n", +- master->name, pp, mtd_node); +- ret = -EINVAL; +-ofpart_none: +- of_node_put(pp); +- kfree(parts); +- return ret; +-} +- +-static const struct of_device_id parse_ofpart_match_table[] = { +- { .compatible = "fixed-partitions" }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, parse_ofpart_match_table); +- +-static struct mtd_part_parser ofpart_parser = { +- .parse_fn = parse_fixed_partitions, +- .name = "fixed-partitions", +- .of_match_table = parse_ofpart_match_table, +-}; +- +-static int parse_ofoldpart_partitions(struct mtd_info *master, +- const struct mtd_partition **pparts, +- struct mtd_part_parser_data *data) +-{ +- struct mtd_partition *parts; +- struct device_node *dp; +- int i, plen, nr_parts; +- const struct { +- __be32 offset, len; +- } *part; +- const char *names; +- +- /* Pull of_node from the master device node */ +- dp = mtd_get_of_node(master); +- if (!dp) +- return 0; +- +- part = of_get_property(dp, "partitions", &plen); +- if (!part) +- return 0; /* No partitions found */ +- +- pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp); +- +- nr_parts = plen / sizeof(part[0]); +- +- parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); +- if (!parts) +- return -ENOMEM; +- +- names = of_get_property(dp, "partition-names", &plen); +- +- for (i = 0; i < nr_parts; i++) { +- parts[i].offset = be32_to_cpu(part->offset); +- parts[i].size = be32_to_cpu(part->len) & ~1; +- /* bit 0 set signifies read only partition */ +- if (be32_to_cpu(part->len) & 1) +- parts[i].mask_flags = MTD_WRITEABLE; +- +- if (names && (plen > 0)) { +- int len = strlen(names) + 1; +- +- parts[i].name = names; +- plen -= len; +- names += len; +- } else { +- parts[i].name = "unnamed"; +- } +- +- part++; +- } +- +- *pparts = parts; +- return nr_parts; +-} +- +-static struct mtd_part_parser ofoldpart_parser = { +- .parse_fn = parse_ofoldpart_partitions, +- .name = "ofoldpart", +-}; +- +-static int __init ofpart_parser_init(void) +-{ +- register_mtd_parser(&ofpart_parser); +- register_mtd_parser(&ofoldpart_parser); +- return 0; +-} +- +-static void __exit ofpart_parser_exit(void) +-{ +- deregister_mtd_parser(&ofpart_parser); +- deregister_mtd_parser(&ofoldpart_parser); +-} +- +-module_init(ofpart_parser_init); +-module_exit(ofpart_parser_exit); +- +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree"); +-MODULE_AUTHOR("Vitaly Wool, David Gibson"); +-/* +- * When MTD core cannot find the requested parser, it tries to load the module +- * with the same name. Since we provide the ofoldpart parser, we should have +- * the corresponding alias. +- */ +-MODULE_ALIAS("fixed-partitions"); +-MODULE_ALIAS("ofoldpart"); +--- /dev/null ++++ b/drivers/mtd/parsers/ofpart_core.c +@@ -0,0 +1,263 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * Flash partitions described by the OF (or flattened) device tree ++ * ++ * Copyright © 2006 MontaVista Software Inc. ++ * Author: Vitaly Wool ++ * ++ * Revised to handle newer style flash binding by: ++ * Copyright © 2007 David Gibson, IBM Corporation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ofpart_bcm4908.h" ++ ++struct fixed_partitions_quirks { ++ int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts); ++}; ++ ++struct fixed_partitions_quirks bcm4908_partitions_quirks = { ++ .post_parse = bcm4908_partitions_post_parse, ++}; ++ ++static const struct of_device_id parse_ofpart_match_table[]; ++ ++static bool node_has_compatible(struct device_node *pp) ++{ ++ return of_get_property(pp, "compatible", NULL); ++} ++ ++static int parse_fixed_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ const struct fixed_partitions_quirks *quirks; ++ const struct of_device_id *of_id; ++ struct mtd_partition *parts; ++ struct device_node *mtd_node; ++ struct device_node *ofpart_node; ++ const char *partname; ++ struct device_node *pp; ++ int nr_parts, i, ret = 0; ++ bool dedicated = true; ++ ++ /* Pull of_node from the master device node */ ++ mtd_node = mtd_get_of_node(master); ++ if (!mtd_node) ++ return 0; ++ ++ ofpart_node = of_get_child_by_name(mtd_node, "partitions"); ++ if (!ofpart_node) { ++ /* ++ * We might get here even when ofpart isn't used at all (e.g., ++ * when using another parser), so don't be louder than ++ * KERN_DEBUG ++ */ ++ pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n", ++ master->name, mtd_node); ++ ofpart_node = mtd_node; ++ dedicated = false; ++ } ++ ++ of_id = of_match_node(parse_ofpart_match_table, ofpart_node); ++ if (dedicated && !of_id) { ++ /* The 'partitions' subnode might be used by another parser */ ++ return 0; ++ } ++ ++ quirks = of_id ? of_id->data : NULL; ++ ++ /* First count the subnodes */ ++ nr_parts = 0; ++ for_each_child_of_node(ofpart_node, pp) { ++ if (!dedicated && node_has_compatible(pp)) ++ continue; ++ ++ nr_parts++; ++ } ++ ++ if (nr_parts == 0) ++ return 0; ++ ++ parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); ++ if (!parts) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_child_of_node(ofpart_node, pp) { ++ const __be32 *reg; ++ int len; ++ int a_cells, s_cells; ++ ++ if (!dedicated && node_has_compatible(pp)) ++ continue; ++ ++ reg = of_get_property(pp, "reg", &len); ++ if (!reg) { ++ if (dedicated) { ++ pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n", ++ master->name, pp, ++ mtd_node); ++ goto ofpart_fail; ++ } else { ++ nr_parts--; ++ continue; ++ } ++ } ++ ++ a_cells = of_n_addr_cells(pp); ++ s_cells = of_n_size_cells(pp); ++ if (len / 4 != a_cells + s_cells) { ++ pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n", ++ master->name, pp, ++ mtd_node); ++ goto ofpart_fail; ++ } ++ ++ parts[i].offset = of_read_number(reg, a_cells); ++ parts[i].size = of_read_number(reg + a_cells, s_cells); ++ parts[i].of_node = pp; ++ ++ partname = of_get_property(pp, "label", &len); ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ parts[i].name = partname; ++ ++ if (of_get_property(pp, "read-only", &len)) ++ parts[i].mask_flags |= MTD_WRITEABLE; ++ ++ if (of_get_property(pp, "lock", &len)) ++ parts[i].mask_flags |= MTD_POWERUP_LOCK; ++ ++ if (of_property_read_bool(pp, "slc-mode")) ++ parts[i].add_flags |= MTD_SLC_ON_MLC_EMULATION; ++ ++ i++; ++ } ++ ++ if (!nr_parts) ++ goto ofpart_none; ++ ++ if (quirks && quirks->post_parse) ++ quirks->post_parse(master, parts, nr_parts); ++ ++ *pparts = parts; ++ return nr_parts; ++ ++ofpart_fail: ++ pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n", ++ master->name, pp, mtd_node); ++ ret = -EINVAL; ++ofpart_none: ++ of_node_put(pp); ++ kfree(parts); ++ return ret; ++} ++ ++static const struct of_device_id parse_ofpart_match_table[] = { ++ /* Generic */ ++ { .compatible = "fixed-partitions" }, ++ /* Customized */ ++ { .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, parse_ofpart_match_table); ++ ++static struct mtd_part_parser ofpart_parser = { ++ .parse_fn = parse_fixed_partitions, ++ .name = "fixed-partitions", ++ .of_match_table = parse_ofpart_match_table, ++}; ++ ++static int parse_ofoldpart_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct mtd_partition *parts; ++ struct device_node *dp; ++ int i, plen, nr_parts; ++ const struct { ++ __be32 offset, len; ++ } *part; ++ const char *names; ++ ++ /* Pull of_node from the master device node */ ++ dp = mtd_get_of_node(master); ++ if (!dp) ++ return 0; ++ ++ part = of_get_property(dp, "partitions", &plen); ++ if (!part) ++ return 0; /* No partitions found */ ++ ++ pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp); ++ ++ nr_parts = plen / sizeof(part[0]); ++ ++ parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); ++ if (!parts) ++ return -ENOMEM; ++ ++ names = of_get_property(dp, "partition-names", &plen); ++ ++ for (i = 0; i < nr_parts; i++) { ++ parts[i].offset = be32_to_cpu(part->offset); ++ parts[i].size = be32_to_cpu(part->len) & ~1; ++ /* bit 0 set signifies read only partition */ ++ if (be32_to_cpu(part->len) & 1) ++ parts[i].mask_flags = MTD_WRITEABLE; ++ ++ if (names && (plen > 0)) { ++ int len = strlen(names) + 1; ++ ++ parts[i].name = names; ++ plen -= len; ++ names += len; ++ } else { ++ parts[i].name = "unnamed"; ++ } ++ ++ part++; ++ } ++ ++ *pparts = parts; ++ return nr_parts; ++} ++ ++static struct mtd_part_parser ofoldpart_parser = { ++ .parse_fn = parse_ofoldpart_partitions, ++ .name = "ofoldpart", ++}; ++ ++static int __init ofpart_parser_init(void) ++{ ++ register_mtd_parser(&ofpart_parser); ++ register_mtd_parser(&ofoldpart_parser); ++ return 0; ++} ++ ++static void __exit ofpart_parser_exit(void) ++{ ++ deregister_mtd_parser(&ofpart_parser); ++ deregister_mtd_parser(&ofoldpart_parser); ++} ++ ++module_init(ofpart_parser_init); ++module_exit(ofpart_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree"); ++MODULE_AUTHOR("Vitaly Wool, David Gibson"); ++/* ++ * When MTD core cannot find the requested parser, it tries to load the module ++ * with the same name. Since we provide the ofoldpart parser, we should have ++ * the corresponding alias. ++ */ ++MODULE_ALIAS("fixed-partitions"); ++MODULE_ALIAS("ofoldpart"); diff --git a/target/linux/generic/backport-5.15/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch b/target/linux/generic/backport-5.15/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch new file mode 100644 index 0000000000..55a91d7680 --- /dev/null +++ b/target/linux/generic/backport-5.15/404-v5.13-mtd-parsers-ofpart-limit-parsing-of-deprecated-DT-sy.patch @@ -0,0 +1,69 @@ +From 2d751203aacf86a1b301a188d8551c7da91043ab Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 2 Mar 2021 20:00:12 +0100 +Subject: [PATCH] mtd: parsers: ofpart: limit parsing of deprecated DT syntax +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +For backward compatibility ofpart still supports the old syntax like: +spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x100000>; + }; +}; +(without "partitions" subnode). + +There is no reason however to support nested partitions without a clear +"compatible" string like: +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x100000>; + + partition@0 { + label = "config"; + reg = <0x80000 0x80000>; + }; + }; +}; +(we never officially supported or documented that). + +Make sure ofpart doesn't attempt to parse above. + +Cc: Ansuel Smith +Signed-off-by: Rafał Miłecki +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210302190012.1255-1-zajec5@gmail.com +--- + drivers/mtd/parsers/ofpart_core.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/ofpart_core.c ++++ b/drivers/mtd/parsers/ofpart_core.c +@@ -53,7 +53,7 @@ static int parse_fixed_partitions(struct + return 0; + + ofpart_node = of_get_child_by_name(mtd_node, "partitions"); +- if (!ofpart_node) { ++ if (!ofpart_node && !master->parent) { + /* + * We might get here even when ofpart isn't used at all (e.g., + * when using another parser), so don't be louder than +@@ -64,6 +64,8 @@ static int parse_fixed_partitions(struct + ofpart_node = mtd_node; + dedicated = false; + } ++ if (!ofpart_node) ++ return 0; + + of_id = of_match_node(parse_ofpart_match_table, ofpart_node); + if (dedicated && !of_id) { diff --git a/target/linux/generic/backport-5.15/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch b/target/linux/generic/backport-5.15/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch new file mode 100644 index 0000000000..f1b778a6e1 --- /dev/null +++ b/target/linux/generic/backport-5.15/405-v5.13-mtd-parsers-ofpart-make-symbol-bcm4908_partitions_qu.patch @@ -0,0 +1,34 @@ +From b87b6d2d6f540e29c3f98e1572d64e560d73d6c1 Mon Sep 17 00:00:00 2001 +From: Wei Yongjun +Date: Thu, 4 Mar 2021 06:46:00 +0000 +Subject: [PATCH] mtd: parsers: ofpart: make symbol 'bcm4908_partitions_quirks' + static + +The sparse tool complains as follows: + +drivers/mtd/parsers/ofpart_core.c:25:32: warning: + symbol 'bcm4908_partitions_quirks' was not declared. Should it be static? + +This symbol is not used outside of ofpart_core.c, so this +commit marks it static. + +Fixes: 457da931b608 ("mtd: parsers: ofpart: support BCM4908 fixed partitions") +Reported-by: Hulk Robot +Signed-off-by: Wei Yongjun +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210304064600.3279138-1-weiyongjun1@huawei.com +--- + drivers/mtd/parsers/ofpart_core.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/ofpart_core.c ++++ b/drivers/mtd/parsers/ofpart_core.c +@@ -22,7 +22,7 @@ struct fixed_partitions_quirks { + int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts); + }; + +-struct fixed_partitions_quirks bcm4908_partitions_quirks = { ++static struct fixed_partitions_quirks bcm4908_partitions_quirks = { + .post_parse = bcm4908_partitions_post_parse, + }; + diff --git a/target/linux/generic/backport-5.15/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch b/target/linux/generic/backport-5.15/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch new file mode 100644 index 0000000000..28335cb71f --- /dev/null +++ b/target/linux/generic/backport-5.15/406-v5.13-0001-mtd-core-add-nvmem-cells-compatible-to-parse-mtd-as-.patch @@ -0,0 +1,38 @@ +From a5d83d6e2bc747b13f347962d4b335d70b23559b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 12 Mar 2021 07:28:19 +0100 +Subject: [PATCH] mtd: core: add nvmem-cells compatible to parse mtd as nvmem + cells +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Partitions that contains the nvmem-cells compatible will register +their direct subonodes as nvmem cells and the node will be treated as a +nvmem provider. + +Signed-off-by: Ansuel Smith +Tested-by: Rafał Miłecki +--- + drivers/mtd/mtdcore.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -531,6 +531,7 @@ static int mtd_nvmem_reg_read(void *priv + + static int mtd_nvmem_add(struct mtd_info *mtd) + { ++ struct device_node *node = mtd_get_of_node(mtd); + struct nvmem_config config = {}; + + config.id = -1; +@@ -543,7 +544,7 @@ static int mtd_nvmem_add(struct mtd_info + config.stride = 1; + config.read_only = true; + config.root_only = true; +- config.no_of_node = true; ++ config.no_of_node = !of_device_is_compatible(node, "nvmem-cells"); + config.priv = mtd; + + mtd->nvmem = nvmem_register(&config); diff --git a/target/linux/generic/backport-5.15/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch b/target/linux/generic/backport-5.15/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch new file mode 100644 index 0000000000..14ea3f6b8c --- /dev/null +++ b/target/linux/generic/backport-5.15/406-v5.13-0002-dt-bindings-nvmem-drop-nodename-restriction.patch @@ -0,0 +1,25 @@ +From 42645976c3289b03a12f1bd2bc131fd98fc27170 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 12 Mar 2021 07:28:20 +0100 +Subject: [PATCH] devicetree: nvmem: nvmem: drop $nodename restriction + +Drop $nodename restriction as now mtd partition can also be used as +nvmem provider. + +Signed-off-by: Ansuel Smith +--- + Documentation/devicetree/bindings/nvmem/nvmem.yaml | 3 --- + 1 file changed, 3 deletions(-) + +--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml ++++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml +@@ -20,9 +20,6 @@ description: | + storage device. + + properties: +- $nodename: +- pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$" +- + "#address-cells": + const: 1 + diff --git a/target/linux/generic/backport-5.15/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch b/target/linux/generic/backport-5.15/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch new file mode 100644 index 0000000000..0eb4c637cf --- /dev/null +++ b/target/linux/generic/backport-5.15/406-v5.13-0003-dt-bindings-mtd-Document-use-of-nvmem-cells-compatib.patch @@ -0,0 +1,117 @@ +From 377aa0135dc8489312edd3184d143ce3a89ff7ee Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 12 Mar 2021 07:28:21 +0100 +Subject: [PATCH] dt-bindings: mtd: Document use of nvmem-cells compatible + +Document nvmem-cells compatible used to treat mtd partitions as a +nvmem provider. + +Signed-off-by: Ansuel Smith +Reviewed-by: Rob Herring +--- + .../bindings/mtd/partitions/nvmem-cells.yaml | 99 +++++++++++++++++++ + 1 file changed, 99 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml +@@ -0,0 +1,99 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Nvmem cells ++ ++description: | ++ Any partition containing the compatible "nvmem-cells" will register as a ++ nvmem provider. ++ Each direct subnodes represents a nvmem cell following the nvmem binding. ++ Nvmem binding to declare nvmem-cells can be found in: ++ Documentation/devicetree/bindings/nvmem/nvmem.yaml ++ ++maintainers: ++ - Ansuel Smith ++ ++allOf: ++ - $ref: /schemas/nvmem/nvmem.yaml# ++ ++properties: ++ compatible: ++ const: nvmem-cells ++ ++required: ++ - compatible ++ ++additionalProperties: true ++ ++examples: ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ /* ... */ ++ ++ }; ++ art: art@1200000 { ++ compatible = "nvmem-cells"; ++ reg = <0x1200000 0x0140000>; ++ label = "art"; ++ read-only; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ macaddr_gmac1: macaddr_gmac1@0 { ++ reg = <0x0 0x6>; ++ }; ++ ++ macaddr_gmac2: macaddr_gmac2@6 { ++ reg = <0x6 0x6>; ++ }; ++ ++ pre_cal_24g: pre_cal_24g@1000 { ++ reg = <0x1000 0x2f20>; ++ }; ++ ++ pre_cal_5g: pre_cal_5g@5000{ ++ reg = <0x5000 0x2f20>; ++ }; ++ }; ++ - | ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bootloader"; ++ reg = <0x000000 0x100000>; ++ read-only; ++ }; ++ ++ firmware@100000 { ++ compatible = "brcm,trx"; ++ label = "firmware"; ++ reg = <0x100000 0xe00000>; ++ }; ++ ++ calibration@f00000 { ++ compatible = "nvmem-cells"; ++ label = "calibration"; ++ reg = <0xf00000 0x100000>; ++ ranges = <0 0xf00000 0x100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ wifi0@0 { ++ reg = <0x000000 0x080000>; ++ }; ++ ++ wifi1@80000 { ++ reg = <0x080000 0x080000>; ++ }; ++ }; ++ }; diff --git a/target/linux/generic/backport-5.15/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch b/target/linux/generic/backport-5.15/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch new file mode 100644 index 0000000000..35a4afd67b --- /dev/null +++ b/target/linux/generic/backport-5.15/407-v5.13-0001-dt-bindings-mtd-add-binding-for-Linksys-Northstar-pa.patch @@ -0,0 +1,98 @@ +From 2fa7294175c76e1ec568aa75c1891fd908728c8d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 12 Mar 2021 14:49:18 +0100 +Subject: [PATCH] dt-bindings: mtd: add binding for Linksys Northstar + partitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Linksys on Broadcom Northstar devices uses fixed flash layout with +multiple firmware partitions. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Rob Herring +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-1-zajec5@gmail.com +--- + .../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++ + 1 file changed, 74 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml +@@ -0,0 +1,74 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Linksys Northstar partitioning ++ ++description: | ++ Linksys devices based on Broadcom Northstar architecture often use two ++ firmware partitions. One is used for regular booting, the other is treated as ++ fallback. ++ ++ This binding allows defining all fixed partitions and marking those containing ++ firmware. System can use that information e.g. for booting or flashing ++ purposes. ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ compatible: ++ const: linksys,ns-partitions ++ ++ "#address-cells": ++ enum: [ 1, 2 ] ++ ++ "#size-cells": ++ enum: [ 1, 2 ] ++ ++patternProperties: ++ "^partition@[0-9a-f]+$": ++ $ref: "partition.yaml#" ++ properties: ++ compatible: ++ items: ++ - const: linksys,ns-firmware ++ - const: brcm,trx ++ unevaluatedProperties: false ++ ++required: ++ - "#address-cells" ++ - "#size-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ partitions { ++ compatible = "linksys,ns-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "boot"; ++ reg = <0x0 0x100000>; ++ read-only; ++ }; ++ ++ partition@100000 { ++ label = "nvram"; ++ reg = <0x100000 0x100000>; ++ }; ++ ++ partition@200000 { ++ compatible = "linksys,ns-firmware", "brcm,trx"; ++ reg = <0x200000 0xf00000>; ++ }; ++ ++ partition@1100000 { ++ compatible = "linksys,ns-firmware", "brcm,trx"; ++ reg = <0x1100000 0xf00000>; ++ }; ++ }; diff --git a/target/linux/generic/backport-5.15/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch b/target/linux/generic/backport-5.15/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch new file mode 100644 index 0000000000..f317889785 --- /dev/null +++ b/target/linux/generic/backport-5.15/407-v5.13-0002-mtd-parsers-ofpart-support-Linksys-Northstar-partiti.patch @@ -0,0 +1,156 @@ +From 7134a2d026d942210b4d26d6059c9d979ca7866e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 12 Mar 2021 14:49:19 +0100 +Subject: [PATCH] mtd: parsers: ofpart: support Linksys Northstar partitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows extending ofpart parser with support for Linksys Northstar +devices. That support uses recently added quirks mechanism. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-2-zajec5@gmail.com +--- + drivers/mtd/parsers/Kconfig | 10 +++++ + drivers/mtd/parsers/Makefile | 1 + + drivers/mtd/parsers/ofpart_core.c | 6 +++ + drivers/mtd/parsers/ofpart_linksys_ns.c | 50 +++++++++++++++++++++++++ + drivers/mtd/parsers/ofpart_linksys_ns.h | 18 +++++++++ + 5 files changed, 85 insertions(+) + create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.c + create mode 100644 drivers/mtd/parsers/ofpart_linksys_ns.h + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -76,6 +76,16 @@ config MTD_OF_PARTS_BCM4908 + that can have multiple "firmware" partitions. It takes care of + finding currently used one and backup ones. + ++config MTD_OF_PARTS_LINKSYS_NS ++ bool "Linksys Northstar partitioning support" ++ depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST) ++ default ARCH_BCM_5301X ++ help ++ This provides partitions parser for Linksys devices based on Broadcom ++ Northstar architecture. Linksys commonly uses fixed flash layout with ++ two "firmware" partitions. Currently used firmware has to be detected ++ using CFE environment variable. ++ + config MTD_PARSER_IMAGETAG + tristate "Parser for BCM963XX Image Tag format partitions" + depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdl + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + ofpart-y += ofpart_core.o + ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o ++ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o + obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o +--- a/drivers/mtd/parsers/ofpart_core.c ++++ b/drivers/mtd/parsers/ofpart_core.c +@@ -17,6 +17,7 @@ + #include + + #include "ofpart_bcm4908.h" ++#include "ofpart_linksys_ns.h" + + struct fixed_partitions_quirks { + int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts); +@@ -26,6 +27,10 @@ static struct fixed_partitions_quirks bc + .post_parse = bcm4908_partitions_post_parse, + }; + ++static struct fixed_partitions_quirks linksys_ns_partitions_quirks = { ++ .post_parse = linksys_ns_partitions_post_parse, ++}; ++ + static const struct of_device_id parse_ofpart_match_table[]; + + static bool node_has_compatible(struct device_node *pp) +@@ -167,6 +172,7 @@ static const struct of_device_id parse_o + { .compatible = "fixed-partitions" }, + /* Customized */ + { .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, }, ++ { .compatible = "linksys,ns-partitions", .data = &linksys_ns_partitions_quirks, }, + {}, + }; + MODULE_DEVICE_TABLE(of, parse_ofpart_match_table); +--- /dev/null ++++ b/drivers/mtd/parsers/ofpart_linksys_ns.c +@@ -0,0 +1,50 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (C) 2021 Rafał Miłecki ++ */ ++ ++#include ++#include ++#include ++ ++#include "ofpart_linksys_ns.h" ++ ++#define NVRAM_BOOT_PART "bootpartition" ++ ++static int ofpart_linksys_ns_bootpartition(void) ++{ ++ char buf[4]; ++ int bootpartition; ++ ++ /* Check CFE environment variable */ ++ if (bcm47xx_nvram_getenv(NVRAM_BOOT_PART, buf, sizeof(buf)) > 0) { ++ if (!kstrtoint(buf, 0, &bootpartition)) ++ return bootpartition; ++ pr_warn("Failed to parse %s value \"%s\"\n", NVRAM_BOOT_PART, ++ buf); ++ } else { ++ pr_warn("Failed to get NVRAM \"%s\"\n", NVRAM_BOOT_PART); ++ } ++ ++ return 0; ++} ++ ++int linksys_ns_partitions_post_parse(struct mtd_info *mtd, ++ struct mtd_partition *parts, ++ int nr_parts) ++{ ++ int bootpartition = ofpart_linksys_ns_bootpartition(); ++ int trx_idx = 0; ++ int i; ++ ++ for (i = 0; i < nr_parts; i++) { ++ if (of_device_is_compatible(parts[i].of_node, "linksys,ns-firmware")) { ++ if (trx_idx++ == bootpartition) ++ parts[i].name = "firmware"; ++ else ++ parts[i].name = "backup"; ++ } ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/mtd/parsers/ofpart_linksys_ns.h +@@ -0,0 +1,18 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++#ifndef __OFPART_LINKSYS_NS_H ++#define __OFPART_LINKSYS_NS_H ++ ++#ifdef CONFIG_MTD_OF_PARTS_LINKSYS_NS ++int linksys_ns_partitions_post_parse(struct mtd_info *mtd, ++ struct mtd_partition *parts, ++ int nr_parts); ++#else ++static inline int linksys_ns_partitions_post_parse(struct mtd_info *mtd, ++ struct mtd_partition *parts, ++ int nr_parts) ++{ ++ return -EOPNOTSUPP; ++} ++#endif ++ ++#endif diff --git a/target/linux/generic/backport-5.15/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch b/target/linux/generic/backport-5.15/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch new file mode 100644 index 0000000000..3af641e62e --- /dev/null +++ b/target/linux/generic/backport-5.15/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch @@ -0,0 +1,54 @@ +From 7e4404113686868858a34210c28ae122e967aa64 Mon Sep 17 00:00:00 2001 +From: Mauri Sandberg +Date: Tue, 9 Mar 2021 19:48:59 +0200 +Subject: [PATCH] mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip + 0x2201 + +Buffer writes do not work with AMD chip 0x2201. The chip in question +is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1] +talks about writing buffers being possible. While waiting for a neater +solution resort to writing word-sized chunks only. + +Without the patch kernel logs will be flooded with entries like below: + +jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 +jffs2_build_filesystem(): unlocking the mtd device... +done. +jffs2_build_filesystem(): erasing all blocks after the end marker... +MTD do_write_buffer_wait(): software timeout, address:0x01ec000a. +jffs2: Write clean marker to block at 0x01920000 failed: -5 +MTD do_write_buffer_wait(): software timeout, address:0x01e2000a. +jffs2: Write clean marker to block at 0x01880000 failed: -5 +MTD do_write_buffer_wait(): software timeout, address:0x01e0000a. +jffs2: Write clean marker to block at 0x01860000 failed: -5 +MTD do_write_buffer_wait(): software timeout, address:0x01dc000a. +jffs2: Write clean marker to block at 0x01820000 failed: -5 +MTD do_write_buffer_wait(): software timeout, address:0x01da000a. +jffs2: Write clean marker to block at 0x01800000 failed: -5 +... + +Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16. + +[1] https://www.cypress.com/file/219941/download +or https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1 + +Signed-off-by: Mauri Sandberg +Signed-off-by: Vignesh Raghavendra +Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru + { + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; ++ ++ if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201) ++ return; ++ + if (cfi->cfiq->BufWriteTimeoutTyp) { + pr_debug("Using buffer write method\n"); + mtd->_write = cfi_amdstd_write_buffers; diff --git a/target/linux/generic/backport-5.15/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch b/target/linux/generic/backport-5.15/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch new file mode 100644 index 0000000000..1f34652141 --- /dev/null +++ b/target/linux/generic/backport-5.15/409-v5.14-0001-dt-bindings-mtd-brcm-trx-Add-brcm-trx-magic.patch @@ -0,0 +1,32 @@ +From a4d82940ff85a7e307953dfa715f65d5ab487e10 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 18 Apr 2021 23:46:14 +0200 +Subject: dt-bindings: mtd: brcm,trx: Add brcm,trx-magic + +This adds the description of an additional property which allows to +specify a custom partition parser magic to detect a trx partition. +Buffalo has multiple device which are using the trx format, but with +different magic values. + +Signed-off-by: Hauke Mehrtens +Acked-by: Rob Herring +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-2-hauke@hauke-m.de +--- + .../devicetree/bindings/mtd/partitions/brcm,trx.txt | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt ++++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt +@@ -28,6 +28,11 @@ detected by a software parsing TRX heade + Required properties: + - compatible : (required) must be "brcm,trx" + ++Optional properties: ++ ++- brcm,trx-magic: TRX magic, if it is different from the default magic ++ 0x30524448 as a u32. ++ + Example: + + flash@0 { diff --git a/target/linux/generic/backport-5.15/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch b/target/linux/generic/backport-5.15/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch new file mode 100644 index 0000000000..de2d914852 --- /dev/null +++ b/target/linux/generic/backport-5.15/409-v5.14-0002-mtd-parsers-trx-Allow-to-specify-brcm-trx-magic-in-D.patch @@ -0,0 +1,50 @@ +From d7f7e04f8b67571a4bf5a0dcd4f9da4214f5262c Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 18 Apr 2021 23:46:15 +0200 +Subject: mtd: parsers: trx: Allow to specify brcm, trx-magic in DT + +Buffalo uses a different TRX magic for every device, to be able to use +this trx parser, make it possible to specify the TRX magic in device +tree. If no TRX magic is specified in device tree, the standard value +will be used. This value should only be specified if a vendor chooses to +use a non standard TRX magic. + +Signed-off-by: Hauke Mehrtens +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-3-hauke@hauke-m.de +--- + drivers/mtd/parsers/parser_trx.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/parser_trx.c ++++ b/drivers/mtd/parsers/parser_trx.c +@@ -51,13 +51,20 @@ static int parser_trx_parse(struct mtd_i + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { ++ struct device_node *np = mtd_get_of_node(mtd); + struct mtd_partition *parts; + struct mtd_partition *part; + struct trx_header trx; + size_t bytes_read; + uint8_t curr_part = 0, i = 0; ++ uint32_t trx_magic = TRX_MAGIC; + int err; + ++ /* Get different magic from device tree if specified */ ++ err = of_property_read_u32(np, "brcm,trx-magic", &trx_magic); ++ if (err != 0 && err != -EINVAL) ++ pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err); ++ + parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), + GFP_KERNEL); + if (!parts) +@@ -70,7 +77,7 @@ static int parser_trx_parse(struct mtd_i + return err; + } + +- if (trx.magic != TRX_MAGIC) { ++ if (trx.magic != trx_magic) { + kfree(parts); + return -ENOENT; + } diff --git a/target/linux/generic/backport-5.15/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch b/target/linux/generic/backport-5.15/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch new file mode 100644 index 0000000000..faac535270 --- /dev/null +++ b/target/linux/generic/backport-5.15/409-v5.14-0003-mtd-parsers-trx-Allow-to-use-TRX-parser-on-Mediatek-.patch @@ -0,0 +1,25 @@ +From 81bb218c829246962a6327c64eec18ddcc049936 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 18 Apr 2021 23:46:16 +0200 +Subject: mtd: parsers: trx: Allow to use TRX parser on Mediatek SoCs + +Buffalo uses the TRX partition format also on Mediatek MT7622 SoCs. + +Signed-off-by: Hauke Mehrtens +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20210418214616.239574-4-hauke@hauke-m.de +--- + drivers/mtd/parsers/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -115,7 +115,7 @@ config MTD_AFS_PARTS + + config MTD_PARSER_TRX + tristate "Parser for TRX format partitions" +- depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST) ++ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST) + help + TRX is a firmware format used by Broadcom on their devices. It + may contain up to 3/4 partitions (depending on the version). diff --git a/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch b/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch new file mode 100644 index 0000000000..5c49841760 --- /dev/null +++ b/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch @@ -0,0 +1,33 @@ +From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Sun, 13 Feb 2022 15:40:44 +0900 +Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs + +Buffalo sells some router devices which have trx-formatted firmware, +based on MediaTek MIPS SoCs. To use parser_trx on those devices, add +"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs. + +examples: + +- WCR-1166DS (MT7628) +- WSR-1166DHP (MT7621) +- WSR-2533DHP (MT7621) + +Signed-off-by: INAGAKI Hiroshi +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com +--- + drivers/mtd/parsers/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -115,7 +115,7 @@ config MTD_AFS_PARTS + + config MTD_PARSER_TRX + tristate "Parser for TRX format partitions" +- depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST) ++ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST) + help + TRX is a firmware format used by Broadcom on their devices. It + may contain up to 3/4 partitions (depending on the version). diff --git a/target/linux/generic/backport-5.15/500-v5.13-ubifs-default-to-zstd-compression.patch b/target/linux/generic/backport-5.15/500-v5.13-ubifs-default-to-zstd-compression.patch new file mode 100644 index 0000000000..dd50c19c27 --- /dev/null +++ b/target/linux/generic/backport-5.15/500-v5.13-ubifs-default-to-zstd-compression.patch @@ -0,0 +1,25 @@ +From dcdf415b740923530dc71d89fecc8361078473f5 Mon Sep 17 00:00:00 2001 +From: Rui Salvaterra +Date: Mon, 5 Apr 2021 16:11:55 +0100 +Subject: [PATCH] ubifs: default to zstd compression + +Compared to lzo and zlib, zstd is the best all-around performer, both in terms +of speed and compression ratio. Set it as the default, if available. + +Signed-off-by: Rui Salvaterra +--- + fs/ubifs/sb.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/fs/ubifs/sb.c ++++ b/fs/ubifs/sb.c +@@ -53,6 +53,9 @@ + + static int get_default_compressor(struct ubifs_info *c) + { ++ if (ubifs_compr_present(c, UBIFS_COMPR_ZSTD)) ++ return UBIFS_COMPR_ZSTD; ++ + if (ubifs_compr_present(c, UBIFS_COMPR_LZO)) + return UBIFS_COMPR_LZO; + diff --git a/target/linux/generic/backport-5.15/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch b/target/linux/generic/backport-5.15/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch new file mode 100644 index 0000000000..1fca4a5e74 --- /dev/null +++ b/target/linux/generic/backport-5.15/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch @@ -0,0 +1,88 @@ +From: Felix Fietkau +Date: Mon, 8 Feb 2021 11:34:08 -0800 +Subject: [PATCH] net: extract napi poll functionality to __napi_poll() + +This commit introduces a new function __napi_poll() which does the main +logic of the existing napi_poll() function, and will be called by other +functions in later commits. +This idea and implementation is done by Felix Fietkau and +is proposed as part of the patch to move napi work to work_queue +context. +This commit by itself is a code restructure. + +Signed-off-by: Felix Fietkau +Signed-off-by: Wei Wang +Reviewed-by: Alexander Duyck +Signed-off-by: David S. Miller +--- + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -6805,15 +6805,10 @@ void __netif_napi_del(struct napi_struct + } + EXPORT_SYMBOL(__netif_napi_del); + +-static int napi_poll(struct napi_struct *n, struct list_head *repoll) ++static int __napi_poll(struct napi_struct *n, bool *repoll) + { +- void *have; + int work, weight; + +- list_del_init(&n->poll_list); +- +- have = netpoll_poll_lock(n); +- + weight = n->weight; + + /* This NAPI_STATE_SCHED test is for avoiding a race +@@ -6833,7 +6828,7 @@ static int napi_poll(struct napi_struct + n->poll, work, weight); + + if (likely(work < weight)) +- goto out_unlock; ++ return work; + + /* Drivers must not modify the NAPI state if they + * consume the entire weight. In such cases this code +@@ -6842,7 +6837,7 @@ static int napi_poll(struct napi_struct + */ + if (unlikely(napi_disable_pending(n))) { + napi_complete(n); +- goto out_unlock; ++ return work; + } + + if (n->gro_bitmask) { +@@ -6860,12 +6855,29 @@ static int napi_poll(struct napi_struct + if (unlikely(!list_empty(&n->poll_list))) { + pr_warn_once("%s: Budget exhausted after napi rescheduled\n", + n->dev ? n->dev->name : "backlog"); +- goto out_unlock; ++ return work; + } + +- list_add_tail(&n->poll_list, repoll); ++ *repoll = true; ++ ++ return work; ++} ++ ++static int napi_poll(struct napi_struct *n, struct list_head *repoll) ++{ ++ bool do_repoll = false; ++ void *have; ++ int work; ++ ++ list_del_init(&n->poll_list); ++ ++ have = netpoll_poll_lock(n); ++ ++ work = __napi_poll(n, &do_repoll); ++ ++ if (do_repoll) ++ list_add_tail(&n->poll_list, repoll); + +-out_unlock: + netpoll_poll_unlock(have); + + return work; diff --git a/target/linux/generic/backport-5.15/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch b/target/linux/generic/backport-5.15/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch new file mode 100644 index 0000000000..38e276ef72 --- /dev/null +++ b/target/linux/generic/backport-5.15/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch @@ -0,0 +1,261 @@ +From: Wei Wang +Date: Mon, 8 Feb 2021 11:34:09 -0800 +Subject: [PATCH] net: implement threaded-able napi poll loop support + +This patch allows running each napi poll loop inside its own +kernel thread. +The kthread is created during netif_napi_add() if dev->threaded +is set. And threaded mode is enabled in napi_enable(). We will +provide a way to set dev->threaded and enable threaded mode +without a device up/down in the following patch. + +Once that threaded mode is enabled and the kthread is +started, napi_schedule() will wake-up such thread instead +of scheduling the softirq. + +The threaded poll loop behaves quite likely the net_rx_action, +but it does not have to manipulate local irqs and uses +an explicit scheduling point based on netdev_budget. + +Co-developed-by: Paolo Abeni +Signed-off-by: Paolo Abeni +Co-developed-by: Hannes Frederic Sowa +Signed-off-by: Hannes Frederic Sowa +Co-developed-by: Jakub Kicinski +Signed-off-by: Jakub Kicinski +Signed-off-by: Wei Wang +Reviewed-by: Alexander Duyck +Signed-off-by: David S. Miller +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -347,6 +347,7 @@ struct napi_struct { + struct list_head dev_list; + struct hlist_node napi_hash_node; + unsigned int napi_id; ++ struct task_struct *thread; + }; + + enum { +@@ -357,6 +358,7 @@ enum { + NAPI_STATE_LISTED, /* NAPI added to system lists */ + NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */ + NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */ ++ NAPI_STATE_THREADED, /* The poll is performed inside its own thread*/ + }; + + enum { +@@ -367,6 +369,7 @@ enum { + NAPIF_STATE_LISTED = BIT(NAPI_STATE_LISTED), + NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL), + NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL), ++ NAPIF_STATE_THREADED = BIT(NAPI_STATE_THREADED), + }; + + enum gro_result { +@@ -497,20 +500,7 @@ static inline bool napi_complete(struct + */ + void napi_disable(struct napi_struct *n); + +-/** +- * napi_enable - enable NAPI scheduling +- * @n: NAPI context +- * +- * Resume NAPI from being scheduled on this context. +- * Must be paired with napi_disable. +- */ +-static inline void napi_enable(struct napi_struct *n) +-{ +- BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); +- smp_mb__before_atomic(); +- clear_bit(NAPI_STATE_SCHED, &n->state); +- clear_bit(NAPI_STATE_NPSVC, &n->state); +-} ++void napi_enable(struct napi_struct *n); + + /** + * napi_synchronize - wait until NAPI is not running +@@ -1842,6 +1832,8 @@ enum netdev_ml_priv_type { + * + * @wol_enabled: Wake-on-LAN is enabled + * ++ * @threaded: napi threaded mode is enabled ++ * + * @net_notifier_list: List of per-net netdev notifier block + * that follow this device when it is moved + * to another network namespace. +@@ -2161,6 +2153,7 @@ struct net_device { + struct lock_class_key *qdisc_running_key; + bool proto_down; + unsigned wol_enabled:1; ++ unsigned threaded:1; + + struct list_head net_notifier_list; + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -91,6 +91,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -1500,6 +1501,27 @@ void netdev_notify_peers(struct net_devi + } + EXPORT_SYMBOL(netdev_notify_peers); + ++static int napi_threaded_poll(void *data); ++ ++static int napi_kthread_create(struct napi_struct *n) ++{ ++ int err = 0; ++ ++ /* Create and wake up the kthread once to put it in ++ * TASK_INTERRUPTIBLE mode to avoid the blocked task ++ * warning and work with loadavg. ++ */ ++ n->thread = kthread_run(napi_threaded_poll, n, "napi/%s-%d", ++ n->dev->name, n->napi_id); ++ if (IS_ERR(n->thread)) { ++ err = PTR_ERR(n->thread); ++ pr_err("kthread_run failed with err %d\n", err); ++ n->thread = NULL; ++ } ++ ++ return err; ++} ++ + static int __dev_open(struct net_device *dev, struct netlink_ext_ack *extack) + { + const struct net_device_ops *ops = dev->netdev_ops; +@@ -4267,6 +4289,21 @@ int gro_normal_batch __read_mostly = 8; + static inline void ____napi_schedule(struct softnet_data *sd, + struct napi_struct *napi) + { ++ struct task_struct *thread; ++ ++ if (test_bit(NAPI_STATE_THREADED, &napi->state)) { ++ /* Paired with smp_mb__before_atomic() in ++ * napi_enable(). Use READ_ONCE() to guarantee ++ * a complete read on napi->thread. Only call ++ * wake_up_process() when it's not NULL. ++ */ ++ thread = READ_ONCE(napi->thread); ++ if (thread) { ++ wake_up_process(thread); ++ return; ++ } ++ } ++ + list_add_tail(&napi->poll_list, &sd->poll_list); + __raise_softirq_irqoff(NET_RX_SOFTIRQ); + } +@@ -6758,6 +6795,12 @@ void netif_napi_add(struct net_device *d + set_bit(NAPI_STATE_NPSVC, &napi->state); + list_add_rcu(&napi->dev_list, &dev->napi_list); + napi_hash_add(napi); ++ /* Create kthread for this napi if dev->threaded is set. ++ * Clear dev->threaded if kthread creation failed so that ++ * threaded mode will not be enabled in napi_enable(). ++ */ ++ if (dev->threaded && napi_kthread_create(napi)) ++ dev->threaded = 0; + } + EXPORT_SYMBOL(netif_napi_add); + +@@ -6774,9 +6817,28 @@ void napi_disable(struct napi_struct *n) + hrtimer_cancel(&n->timer); + + clear_bit(NAPI_STATE_DISABLE, &n->state); ++ clear_bit(NAPI_STATE_THREADED, &n->state); + } + EXPORT_SYMBOL(napi_disable); + ++/** ++ * napi_enable - enable NAPI scheduling ++ * @n: NAPI context ++ * ++ * Resume NAPI from being scheduled on this context. ++ * Must be paired with napi_disable. ++ */ ++void napi_enable(struct napi_struct *n) ++{ ++ BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); ++ smp_mb__before_atomic(); ++ clear_bit(NAPI_STATE_SCHED, &n->state); ++ clear_bit(NAPI_STATE_NPSVC, &n->state); ++ if (n->dev->threaded && n->thread) ++ set_bit(NAPI_STATE_THREADED, &n->state); ++} ++EXPORT_SYMBOL(napi_enable); ++ + static void flush_gro_hash(struct napi_struct *napi) + { + int i; +@@ -6802,6 +6864,11 @@ void __netif_napi_del(struct napi_struct + + flush_gro_hash(napi); + napi->gro_bitmask = 0; ++ ++ if (napi->thread) { ++ kthread_stop(napi->thread); ++ napi->thread = NULL; ++ } + } + EXPORT_SYMBOL(__netif_napi_del); + +@@ -6883,6 +6950,51 @@ static int napi_poll(struct napi_struct + return work; + } + ++static int napi_thread_wait(struct napi_struct *napi) ++{ ++ set_current_state(TASK_INTERRUPTIBLE); ++ ++ while (!kthread_should_stop() && !napi_disable_pending(napi)) { ++ if (test_bit(NAPI_STATE_SCHED, &napi->state)) { ++ WARN_ON(!list_empty(&napi->poll_list)); ++ __set_current_state(TASK_RUNNING); ++ return 0; ++ } ++ ++ schedule(); ++ set_current_state(TASK_INTERRUPTIBLE); ++ } ++ __set_current_state(TASK_RUNNING); ++ return -1; ++} ++ ++static int napi_threaded_poll(void *data) ++{ ++ struct napi_struct *napi = data; ++ void *have; ++ ++ while (!napi_thread_wait(napi)) { ++ for (;;) { ++ bool repoll = false; ++ ++ local_bh_disable(); ++ ++ have = netpoll_poll_lock(napi); ++ __napi_poll(napi, &repoll); ++ netpoll_poll_unlock(have); ++ ++ __kfree_skb_flush(); ++ local_bh_enable(); ++ ++ if (!repoll) ++ break; ++ ++ cond_resched(); ++ } ++ } ++ return 0; ++} ++ + static __latent_entropy void net_rx_action(struct softirq_action *h) + { + struct softnet_data *sd = this_cpu_ptr(&softnet_data); diff --git a/target/linux/generic/backport-5.15/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch b/target/linux/generic/backport-5.15/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch new file mode 100644 index 0000000000..c3119a6e9b --- /dev/null +++ b/target/linux/generic/backport-5.15/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch @@ -0,0 +1,177 @@ +From: Wei Wang +Date: Mon, 8 Feb 2021 11:34:10 -0800 +Subject: [PATCH] net: add sysfs attribute to control napi threaded mode + +This patch adds a new sysfs attribute to the network device class. +Said attribute provides a per-device control to enable/disable the +threaded mode for all the napi instances of the given network device, +without the need for a device up/down. +User sets it to 1 or 0 to enable or disable threaded mode. +Note: when switching between threaded and the current softirq based mode +for a napi instance, it will not immediately take effect if the napi is +currently being polled. The mode switch will happen for the next time +napi_schedule() is called. + +Co-developed-by: Paolo Abeni +Signed-off-by: Paolo Abeni +Co-developed-by: Hannes Frederic Sowa +Signed-off-by: Hannes Frederic Sowa +Co-developed-by: Felix Fietkau +Signed-off-by: Felix Fietkau +Signed-off-by: Wei Wang +Reviewed-by: Alexander Duyck +Signed-off-by: David S. Miller +--- + +--- a/Documentation/ABI/testing/sysfs-class-net ++++ b/Documentation/ABI/testing/sysfs-class-net +@@ -337,3 +337,18 @@ Contact: netdev@vger.kernel.org + Description: + 32-bit unsigned integer counting the number of times the link has + been down ++ ++What: /sys/class/net//threaded ++Date: Jan 2021 ++KernelVersion: 5.12 ++Contact: netdev@vger.kernel.org ++Description: ++ Boolean value to control the threaded mode per device. User could ++ set this value to enable/disable threaded mode for all napi ++ belonging to this device, without the need to do device up/down. ++ ++ Possible values: ++ == ================================== ++ 0 threaded mode disabled for this dev ++ 1 threaded mode enabled for this dev ++ == ================================== +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -491,6 +491,8 @@ static inline bool napi_complete(struct + return napi_complete_done(n, 0); + } + ++int dev_set_threaded(struct net_device *dev, bool threaded); ++ + /** + * napi_disable - prevent NAPI from scheduling + * @n: NAPI context +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -4293,8 +4293,9 @@ static inline void ____napi_schedule(str + + if (test_bit(NAPI_STATE_THREADED, &napi->state)) { + /* Paired with smp_mb__before_atomic() in +- * napi_enable(). Use READ_ONCE() to guarantee +- * a complete read on napi->thread. Only call ++ * napi_enable()/dev_set_threaded(). ++ * Use READ_ONCE() to guarantee a complete ++ * read on napi->thread. Only call + * wake_up_process() when it's not NULL. + */ + thread = READ_ONCE(napi->thread); +@@ -6768,6 +6769,49 @@ static void init_gro_hash(struct napi_st + napi->gro_bitmask = 0; + } + ++int dev_set_threaded(struct net_device *dev, bool threaded) ++{ ++ struct napi_struct *napi; ++ int err = 0; ++ ++ if (dev->threaded == threaded) ++ return 0; ++ ++ if (threaded) { ++ list_for_each_entry(napi, &dev->napi_list, dev_list) { ++ if (!napi->thread) { ++ err = napi_kthread_create(napi); ++ if (err) { ++ threaded = false; ++ break; ++ } ++ } ++ } ++ } ++ ++ dev->threaded = threaded; ++ ++ /* Make sure kthread is created before THREADED bit ++ * is set. ++ */ ++ smp_mb__before_atomic(); ++ ++ /* Setting/unsetting threaded mode on a napi might not immediately ++ * take effect, if the current napi instance is actively being ++ * polled. In this case, the switch between threaded mode and ++ * softirq mode will happen in the next round of napi_schedule(). ++ * This should not cause hiccups/stalls to the live traffic. ++ */ ++ list_for_each_entry(napi, &dev->napi_list, dev_list) { ++ if (threaded) ++ set_bit(NAPI_STATE_THREADED, &napi->state); ++ else ++ clear_bit(NAPI_STATE_THREADED, &napi->state); ++ } ++ ++ return err; ++} ++ + void netif_napi_add(struct net_device *dev, struct napi_struct *napi, + int (*poll)(struct napi_struct *, int), int weight) + { +--- a/net/core/net-sysfs.c ++++ b/net/core/net-sysfs.c +@@ -587,6 +587,45 @@ static ssize_t phys_switch_id_show(struc + } + static DEVICE_ATTR_RO(phys_switch_id); + ++static ssize_t threaded_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct net_device *netdev = to_net_dev(dev); ++ ssize_t ret = -EINVAL; ++ ++ if (!rtnl_trylock()) ++ return restart_syscall(); ++ ++ if (dev_isalive(netdev)) ++ ret = sprintf(buf, fmt_dec, netdev->threaded); ++ ++ rtnl_unlock(); ++ return ret; ++} ++ ++static int modify_napi_threaded(struct net_device *dev, unsigned long val) ++{ ++ int ret; ++ ++ if (list_empty(&dev->napi_list)) ++ return -EOPNOTSUPP; ++ ++ if (val != 0 && val != 1) ++ return -EOPNOTSUPP; ++ ++ ret = dev_set_threaded(dev, val); ++ ++ return ret; ++} ++ ++static ssize_t threaded_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t len) ++{ ++ return netdev_store(dev, attr, buf, len, modify_napi_threaded); ++} ++static DEVICE_ATTR_RW(threaded); ++ + static struct attribute *net_class_attrs[] __ro_after_init = { + &dev_attr_netdev_group.attr, + &dev_attr_type.attr, +@@ -619,6 +658,7 @@ static struct attribute *net_class_attrs + &dev_attr_proto_down.attr, + &dev_attr_carrier_up_count.attr, + &dev_attr_carrier_down_count.attr, ++ &dev_attr_threaded.attr, + NULL, + }; + ATTRIBUTE_GROUPS(net_class); diff --git a/target/linux/generic/backport-5.15/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch b/target/linux/generic/backport-5.15/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch new file mode 100644 index 0000000000..febef3e28a --- /dev/null +++ b/target/linux/generic/backport-5.15/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch @@ -0,0 +1,93 @@ +From: Wei Wang +Date: Mon, 1 Mar 2021 17:21:13 -0800 +Subject: [PATCH] net: fix race between napi kthread mode and busy poll + +Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to +determine if the kthread owns this napi and could call napi->poll() on +it. However, if socket busy poll is enabled, it is possible that the +busy poll thread grabs this SCHED bit (after the previous napi->poll() +invokes napi_complete_done() and clears SCHED bit) and tries to poll +on the same napi. napi_disable() could grab the SCHED bit as well. +This patch tries to fix this race by adding a new bit +NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in +____napi_schedule() if the threaded mode is enabled, and gets cleared +in napi_complete_done(), and we only poll the napi in kthread if this +bit is set. This helps distinguish the ownership of the napi between +kthread and other scenarios and fixes the race issue. + +Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support") +Reported-by: Martin Zaharinov +Suggested-by: Jakub Kicinski +Signed-off-by: Wei Wang +Cc: Alexander Duyck +Cc: Eric Dumazet +Cc: Paolo Abeni +Cc: Hannes Frederic Sowa +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -359,6 +359,7 @@ enum { + NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */ + NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */ + NAPI_STATE_THREADED, /* The poll is performed inside its own thread*/ ++ NAPI_STATE_SCHED_THREADED, /* Napi is currently scheduled in threaded mode */ + }; + + enum { +@@ -370,6 +371,7 @@ enum { + NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL), + NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL), + NAPIF_STATE_THREADED = BIT(NAPI_STATE_THREADED), ++ NAPIF_STATE_SCHED_THREADED = BIT(NAPI_STATE_SCHED_THREADED), + }; + + enum gro_result { +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -4300,6 +4300,8 @@ static inline void ____napi_schedule(str + */ + thread = READ_ONCE(napi->thread); + if (thread) { ++ if (thread->state != TASK_INTERRUPTIBLE) ++ set_bit(NAPI_STATE_SCHED_THREADED, &napi->state); + wake_up_process(thread); + return; + } +@@ -6560,7 +6562,8 @@ bool napi_complete_done(struct napi_stru + + WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED)); + +- new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED); ++ new = val & ~(NAPIF_STATE_MISSED | NAPIF_STATE_SCHED | ++ NAPIF_STATE_SCHED_THREADED); + + /* If STATE_MISSED was set, leave STATE_SCHED set, + * because we will call napi->poll() one more time. +@@ -6996,16 +6999,25 @@ static int napi_poll(struct napi_struct + + static int napi_thread_wait(struct napi_struct *napi) + { ++ bool woken = false; ++ + set_current_state(TASK_INTERRUPTIBLE); + + while (!kthread_should_stop() && !napi_disable_pending(napi)) { +- if (test_bit(NAPI_STATE_SCHED, &napi->state)) { ++ /* Testing SCHED_THREADED bit here to make sure the current ++ * kthread owns this napi and could poll on this napi. ++ * Testing SCHED bit is not enough because SCHED bit might be ++ * set by some other busy poll thread or by napi_disable(). ++ */ ++ if (test_bit(NAPI_STATE_SCHED_THREADED, &napi->state) || woken) { + WARN_ON(!list_empty(&napi->poll_list)); + __set_current_state(TASK_RUNNING); + return 0; + } + + schedule(); ++ /* woken being true indicates this thread owns this napi. */ ++ woken = true; + set_current_state(TASK_INTERRUPTIBLE); + } + __set_current_state(TASK_RUNNING); diff --git a/target/linux/generic/backport-5.15/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch b/target/linux/generic/backport-5.15/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch new file mode 100644 index 0000000000..1223b15c33 --- /dev/null +++ b/target/linux/generic/backport-5.15/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch @@ -0,0 +1,53 @@ +From: Paolo Abeni +Date: Fri, 9 Apr 2021 17:24:17 +0200 +Subject: [PATCH] net: fix hangup on napi_disable for threaded napi + +napi_disable() is subject to an hangup, when the threaded +mode is enabled and the napi is under heavy traffic. + +If the relevant napi has been scheduled and the napi_disable() +kicks in before the next napi_threaded_wait() completes - so +that the latter quits due to the napi_disable_pending() condition, +the existing code leaves the NAPI_STATE_SCHED bit set and the +napi_disable() loop waiting for such bit will hang. + +This patch addresses the issue by dropping the NAPI_STATE_DISABLE +bit test in napi_thread_wait(). The later napi_threaded_poll() +iteration will take care of clearing the NAPI_STATE_SCHED. + +This also addresses a related problem reported by Jakub: +before this patch a napi_disable()/napi_enable() pair killed +the napi thread, effectively disabling the threaded mode. +On the patched kernel napi_disable() simply stops scheduling +the relevant thread. + +v1 -> v2: + - let the main napi_thread_poll() loop clear the SCHED bit + +Reported-by: Jakub Kicinski +Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support") +Signed-off-by: Paolo Abeni +Reviewed-by: Eric Dumazet +Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com +Signed-off-by: Jakub Kicinski +--- + +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -7003,7 +7003,7 @@ static int napi_thread_wait(struct napi_ + + set_current_state(TASK_INTERRUPTIBLE); + +- while (!kthread_should_stop() && !napi_disable_pending(napi)) { ++ while (!kthread_should_stop()) { + /* Testing SCHED_THREADED bit here to make sure the current + * kthread owns this napi and could poll on this napi. + * Testing SCHED bit is not enough because SCHED bit might be +@@ -7021,6 +7021,7 @@ static int napi_thread_wait(struct napi_ + set_current_state(TASK_INTERRUPTIBLE); + } + __set_current_state(TASK_RUNNING); ++ + return -1; + } + diff --git a/target/linux/generic/backport-5.15/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch b/target/linux/generic/backport-5.15/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch new file mode 100644 index 0000000000..c881ccfcb0 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-00-netfilter-flowtable-add-hash-offset-field-to-tuple.patch @@ -0,0 +1,52 @@ +From: Pablo Neira Ayuso +Date: Fri, 20 Nov 2020 13:49:13 +0100 +Subject: [PATCH] netfilter: flowtable: add hash offset field to tuple + +Add a placeholder field to calculate hash tuple offset. Similar to +2c407aca6497 ("netfilter: conntrack: avoid gcc-10 zero-length-bounds +warning"). + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -107,6 +107,10 @@ struct flow_offload_tuple { + + u8 l3proto; + u8 l4proto; ++ ++ /* All members above are keys for lookups, see flow_offload_hash(). */ ++ struct { } __hash; ++ + u8 dir; + + u16 mtu; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -191,14 +191,14 @@ static u32 flow_offload_hash(const void + { + const struct flow_offload_tuple *tuple = data; + +- return jhash(tuple, offsetof(struct flow_offload_tuple, dir), seed); ++ return jhash(tuple, offsetof(struct flow_offload_tuple, __hash), seed); + } + + static u32 flow_offload_hash_obj(const void *data, u32 len, u32 seed) + { + const struct flow_offload_tuple_rhash *tuplehash = data; + +- return jhash(&tuplehash->tuple, offsetof(struct flow_offload_tuple, dir), seed); ++ return jhash(&tuplehash->tuple, offsetof(struct flow_offload_tuple, __hash), seed); + } + + static int flow_offload_hash_cmp(struct rhashtable_compare_arg *arg, +@@ -207,7 +207,7 @@ static int flow_offload_hash_cmp(struct + const struct flow_offload_tuple *tuple = arg->key; + const struct flow_offload_tuple_rhash *x = ptr; + +- if (memcmp(&x->tuple, tuple, offsetof(struct flow_offload_tuple, dir))) ++ if (memcmp(&x->tuple, tuple, offsetof(struct flow_offload_tuple, __hash))) + return 1; + + return 0; diff --git a/target/linux/generic/backport-5.15/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch b/target/linux/generic/backport-5.15/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch new file mode 100644 index 0000000000..d98b4bfb7f --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-01-netfilter-flowtable-separate-replace-destroy-and-sta.patch @@ -0,0 +1,98 @@ +From: Oz Shlomo +Date: Tue, 23 Mar 2021 00:56:19 +0100 +Subject: [PATCH] netfilter: flowtable: separate replace, destroy and + stats to different workqueues + +Currently the flow table offload replace, destroy and stats work items are +executed on a single workqueue. As such, DESTROY and STATS commands may +be backloged after a burst of REPLACE work items. This scenario can bloat +up memory and may cause active connections to age. + +Instatiate add, del and stats workqueues to avoid backlogs of non-dependent +actions. Provide sysfs control over the workqueue attributes, allowing +userspace applications to control the workqueue cpumask. + +Signed-off-by: Oz Shlomo +Reviewed-by: Paul Blakey +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -13,7 +13,9 @@ + #include + #include + +-static struct workqueue_struct *nf_flow_offload_wq; ++static struct workqueue_struct *nf_flow_offload_add_wq; ++static struct workqueue_struct *nf_flow_offload_del_wq; ++static struct workqueue_struct *nf_flow_offload_stats_wq; + + struct flow_offload_work { + struct list_head list; +@@ -827,7 +829,12 @@ static void flow_offload_work_handler(st + + static void flow_offload_queue_work(struct flow_offload_work *offload) + { +- queue_work(nf_flow_offload_wq, &offload->work); ++ if (offload->cmd == FLOW_CLS_REPLACE) ++ queue_work(nf_flow_offload_add_wq, &offload->work); ++ else if (offload->cmd == FLOW_CLS_DESTROY) ++ queue_work(nf_flow_offload_del_wq, &offload->work); ++ else ++ queue_work(nf_flow_offload_stats_wq, &offload->work); + } + + static struct flow_offload_work * +@@ -899,8 +906,11 @@ void nf_flow_offload_stats(struct nf_flo + + void nf_flow_table_offload_flush(struct nf_flowtable *flowtable) + { +- if (nf_flowtable_hw_offload(flowtable)) +- flush_workqueue(nf_flow_offload_wq); ++ if (nf_flowtable_hw_offload(flowtable)) { ++ flush_workqueue(nf_flow_offload_add_wq); ++ flush_workqueue(nf_flow_offload_del_wq); ++ flush_workqueue(nf_flow_offload_stats_wq); ++ } + } + + static int nf_flow_table_block_setup(struct nf_flowtable *flowtable, +@@ -1013,15 +1023,33 @@ EXPORT_SYMBOL_GPL(nf_flow_table_offload_ + + int nf_flow_table_offload_init(void) + { +- nf_flow_offload_wq = alloc_workqueue("nf_flow_table_offload", +- WQ_UNBOUND, 0); +- if (!nf_flow_offload_wq) ++ nf_flow_offload_add_wq = alloc_workqueue("nf_ft_offload_add", ++ WQ_UNBOUND | WQ_SYSFS, 0); ++ if (!nf_flow_offload_add_wq) + return -ENOMEM; + ++ nf_flow_offload_del_wq = alloc_workqueue("nf_ft_offload_del", ++ WQ_UNBOUND | WQ_SYSFS, 0); ++ if (!nf_flow_offload_del_wq) ++ goto err_del_wq; ++ ++ nf_flow_offload_stats_wq = alloc_workqueue("nf_ft_offload_stats", ++ WQ_UNBOUND | WQ_SYSFS, 0); ++ if (!nf_flow_offload_stats_wq) ++ goto err_stats_wq; ++ + return 0; ++ ++err_stats_wq: ++ destroy_workqueue(nf_flow_offload_del_wq); ++err_del_wq: ++ destroy_workqueue(nf_flow_offload_add_wq); ++ return -ENOMEM; + } + + void nf_flow_table_offload_exit(void) + { +- destroy_workqueue(nf_flow_offload_wq); ++ destroy_workqueue(nf_flow_offload_add_wq); ++ destroy_workqueue(nf_flow_offload_del_wq); ++ destroy_workqueue(nf_flow_offload_stats_wq); + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch b/target/linux/generic/backport-5.15/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch new file mode 100644 index 0000000000..37e80d989d --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-03-netfilter-conntrack-Remove-unused-variable-declarati.patch @@ -0,0 +1,22 @@ +From: YueHaibing +Date: Tue, 23 Mar 2021 00:56:21 +0100 +Subject: [PATCH] netfilter: conntrack: Remove unused variable + declaration + +commit e97c3e278e95 ("tproxy: split off ipv6 defragmentation to a separate +module") left behind this. + +Signed-off-by: YueHaibing +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/ipv6/nf_conntrack_ipv6.h ++++ b/include/net/netfilter/ipv6/nf_conntrack_ipv6.h +@@ -4,7 +4,4 @@ + + extern const struct nf_conntrack_l4proto nf_conntrack_l4proto_icmpv6; + +-#include +-extern struct ctl_table nf_ct_ipv6_sysctl_table[]; +- + #endif /* _NF_CONNTRACK_IPV6_H*/ diff --git a/target/linux/generic/backport-5.15/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch b/target/linux/generic/backport-5.15/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch new file mode 100644 index 0000000000..9fd01b465e --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-04-netfilter-flowtable-consolidate-skb_try_make_writabl.patch @@ -0,0 +1,291 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:22 +0100 +Subject: [PATCH] netfilter: flowtable: consolidate + skb_try_make_writable() call + +Fetch the layer 4 header size to be mangled by NAT when building the +tuple, then use it to make writable the network and the transport +headers. After this update, the NAT routines now assumes that the skbuff +area is writable. Do the pointer refetch only after the single +skb_try_make_writable() call. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -394,9 +394,6 @@ static int nf_flow_nat_port_tcp(struct s + { + struct tcphdr *tcph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*tcph))) +- return -1; +- + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace2(&tcph->check, skb, port, new_port, false); + +@@ -408,9 +405,6 @@ static int nf_flow_nat_port_udp(struct s + { + struct udphdr *udph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*udph))) +- return -1; +- + udph = (void *)(skb_network_header(skb) + thoff); + if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) { + inet_proto_csum_replace2(&udph->check, skb, port, +@@ -446,9 +440,6 @@ int nf_flow_snat_port(const struct flow_ + struct flow_ports *hdr; + __be16 port, new_port; + +- if (skb_try_make_writable(skb, thoff + sizeof(*hdr))) +- return -1; +- + hdr = (void *)(skb_network_header(skb) + thoff); + + switch (dir) { +@@ -477,9 +468,6 @@ int nf_flow_dnat_port(const struct flow_ + struct flow_ports *hdr; + __be16 port, new_port; + +- if (skb_try_make_writable(skb, thoff + sizeof(*hdr))) +- return -1; +- + hdr = (void *)(skb_network_header(skb) + thoff); + + switch (dir) { +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -39,9 +39,6 @@ static int nf_flow_nat_ip_tcp(struct sk_ + { + struct tcphdr *tcph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*tcph))) +- return -1; +- + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace4(&tcph->check, skb, addr, new_addr, true); + +@@ -53,9 +50,6 @@ static int nf_flow_nat_ip_udp(struct sk_ + { + struct udphdr *udph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*udph))) +- return -1; +- + udph = (void *)(skb_network_header(skb) + thoff); + if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) { + inet_proto_csum_replace4(&udph->check, skb, addr, +@@ -136,19 +130,17 @@ static int nf_flow_dnat_ip(const struct + } + + static int nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb, +- unsigned int thoff, enum flow_offload_tuple_dir dir) ++ unsigned int thoff, enum flow_offload_tuple_dir dir, ++ struct iphdr *iph) + { +- struct iphdr *iph = ip_hdr(skb); +- + if (test_bit(NF_FLOW_SNAT, &flow->flags) && + (nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir) < 0 || +- nf_flow_snat_ip(flow, skb, ip_hdr(skb), thoff, dir) < 0)) ++ nf_flow_snat_ip(flow, skb, iph, thoff, dir) < 0)) + return -1; + +- iph = ip_hdr(skb); + if (test_bit(NF_FLOW_DNAT, &flow->flags) && + (nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir) < 0 || +- nf_flow_dnat_ip(flow, skb, ip_hdr(skb), thoff, dir) < 0)) ++ nf_flow_dnat_ip(flow, skb, iph, thoff, dir) < 0)) + return -1; + + return 0; +@@ -160,10 +152,10 @@ static bool ip_has_options(unsigned int + } + + static int nf_flow_tuple_ip(struct sk_buff *skb, const struct net_device *dev, +- struct flow_offload_tuple *tuple) ++ struct flow_offload_tuple *tuple, u32 *hdrsize) + { +- unsigned int thoff, hdrsize; + struct flow_ports *ports; ++ unsigned int thoff; + struct iphdr *iph; + + if (!pskb_may_pull(skb, sizeof(*iph))) +@@ -178,10 +170,10 @@ static int nf_flow_tuple_ip(struct sk_bu + + switch (iph->protocol) { + case IPPROTO_TCP: +- hdrsize = sizeof(struct tcphdr); ++ *hdrsize = sizeof(struct tcphdr); + break; + case IPPROTO_UDP: +- hdrsize = sizeof(struct udphdr); ++ *hdrsize = sizeof(struct udphdr); + break; + default: + return -1; +@@ -191,7 +183,7 @@ static int nf_flow_tuple_ip(struct sk_bu + return -1; + + thoff = iph->ihl * 4; +- if (!pskb_may_pull(skb, thoff + hdrsize)) ++ if (!pskb_may_pull(skb, thoff + *hdrsize)) + return -1; + + iph = ip_hdr(skb); +@@ -252,11 +244,12 @@ nf_flow_offload_ip_hook(void *priv, stru + unsigned int thoff; + struct iphdr *iph; + __be32 nexthop; ++ u32 hdrsize; + + if (skb->protocol != htons(ETH_P_IP)) + return NF_ACCEPT; + +- if (nf_flow_tuple_ip(skb, state->in, &tuple) < 0) ++ if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize) < 0) + return NF_ACCEPT; + + tuplehash = flow_offload_lookup(flow_table, &tuple); +@@ -271,11 +264,13 @@ nf_flow_offload_ip_hook(void *priv, stru + if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu))) + return NF_ACCEPT; + +- if (skb_try_make_writable(skb, sizeof(*iph))) ++ iph = ip_hdr(skb); ++ thoff = iph->ihl * 4; ++ if (skb_try_make_writable(skb, thoff + hdrsize)) + return NF_DROP; + +- thoff = ip_hdr(skb)->ihl * 4; +- if (nf_flow_state_check(flow, ip_hdr(skb)->protocol, skb, thoff)) ++ iph = ip_hdr(skb); ++ if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + + flow_offload_refresh(flow_table, flow); +@@ -285,10 +280,9 @@ nf_flow_offload_ip_hook(void *priv, stru + return NF_ACCEPT; + } + +- if (nf_flow_nat_ip(flow, skb, thoff, dir) < 0) ++ if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0) + return NF_DROP; + +- iph = ip_hdr(skb); + ip_decrease_ttl(iph); + skb->tstamp = 0; + +@@ -317,9 +311,6 @@ static int nf_flow_nat_ipv6_tcp(struct s + { + struct tcphdr *tcph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*tcph))) +- return -1; +- + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace16(&tcph->check, skb, addr->s6_addr32, + new_addr->s6_addr32, true); +@@ -333,9 +324,6 @@ static int nf_flow_nat_ipv6_udp(struct s + { + struct udphdr *udph; + +- if (skb_try_make_writable(skb, thoff + sizeof(*udph))) +- return -1; +- + udph = (void *)(skb_network_header(skb) + thoff); + if (udph->check || skb->ip_summed == CHECKSUM_PARTIAL) { + inet_proto_csum_replace16(&udph->check, skb, addr->s6_addr32, +@@ -417,31 +405,30 @@ static int nf_flow_dnat_ipv6(const struc + + static int nf_flow_nat_ipv6(const struct flow_offload *flow, + struct sk_buff *skb, +- enum flow_offload_tuple_dir dir) ++ enum flow_offload_tuple_dir dir, ++ struct ipv6hdr *ip6h) + { +- struct ipv6hdr *ip6h = ipv6_hdr(skb); + unsigned int thoff = sizeof(*ip6h); + + if (test_bit(NF_FLOW_SNAT, &flow->flags) && + (nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 || +- nf_flow_snat_ipv6(flow, skb, ipv6_hdr(skb), thoff, dir) < 0)) ++ nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir) < 0)) + return -1; + +- ip6h = ipv6_hdr(skb); + if (test_bit(NF_FLOW_DNAT, &flow->flags) && + (nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 || +- nf_flow_dnat_ipv6(flow, skb, ipv6_hdr(skb), thoff, dir) < 0)) ++ nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir) < 0)) + return -1; + + return 0; + } + + static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev, +- struct flow_offload_tuple *tuple) ++ struct flow_offload_tuple *tuple, u32 *hdrsize) + { +- unsigned int thoff, hdrsize; + struct flow_ports *ports; + struct ipv6hdr *ip6h; ++ unsigned int thoff; + + if (!pskb_may_pull(skb, sizeof(*ip6h))) + return -1; +@@ -450,10 +437,10 @@ static int nf_flow_tuple_ipv6(struct sk_ + + switch (ip6h->nexthdr) { + case IPPROTO_TCP: +- hdrsize = sizeof(struct tcphdr); ++ *hdrsize = sizeof(struct tcphdr); + break; + case IPPROTO_UDP: +- hdrsize = sizeof(struct udphdr); ++ *hdrsize = sizeof(struct udphdr); + break; + default: + return -1; +@@ -463,7 +450,7 @@ static int nf_flow_tuple_ipv6(struct sk_ + return -1; + + thoff = sizeof(*ip6h); +- if (!pskb_may_pull(skb, thoff + hdrsize)) ++ if (!pskb_may_pull(skb, thoff + *hdrsize)) + return -1; + + ip6h = ipv6_hdr(skb); +@@ -493,11 +480,12 @@ nf_flow_offload_ipv6_hook(void *priv, st + struct net_device *outdev; + struct ipv6hdr *ip6h; + struct rt6_info *rt; ++ u32 hdrsize; + + if (skb->protocol != htons(ETH_P_IPV6)) + return NF_ACCEPT; + +- if (nf_flow_tuple_ipv6(skb, state->in, &tuple) < 0) ++ if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize) < 0) + return NF_ACCEPT; + + tuplehash = flow_offload_lookup(flow_table, &tuple); +@@ -523,13 +511,13 @@ nf_flow_offload_ipv6_hook(void *priv, st + return NF_ACCEPT; + } + +- if (skb_try_make_writable(skb, sizeof(*ip6h))) ++ if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize)) + return NF_DROP; + +- if (nf_flow_nat_ipv6(flow, skb, dir) < 0) ++ ip6h = ipv6_hdr(skb); ++ if (nf_flow_nat_ipv6(flow, skb, dir, ip6h) < 0) + return NF_DROP; + +- ip6h = ipv6_hdr(skb); + ip6h->hop_limit--; + skb->tstamp = 0; + diff --git a/target/linux/generic/backport-5.15/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch b/target/linux/generic/backport-5.15/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch new file mode 100644 index 0000000000..84e294de7a --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-05-netfilter-flowtable-move-skb_try_make_writable-befor.patch @@ -0,0 +1,35 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:23 +0100 +Subject: [PATCH] netfilter: flowtable: move skb_try_make_writable() + before NAT in IPv4 + +For consistency with the IPv6 flowtable datapath and to make sure the +skbuff is writable right before the NAT header updates. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -266,10 +266,6 @@ nf_flow_offload_ip_hook(void *priv, stru + + iph = ip_hdr(skb); + thoff = iph->ihl * 4; +- if (skb_try_make_writable(skb, thoff + hdrsize)) +- return NF_DROP; +- +- iph = ip_hdr(skb); + if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + +@@ -280,6 +276,10 @@ nf_flow_offload_ip_hook(void *priv, stru + return NF_ACCEPT; + } + ++ if (skb_try_make_writable(skb, thoff + hdrsize)) ++ return NF_DROP; ++ ++ iph = ip_hdr(skb); + if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0) + return NF_DROP; + diff --git a/target/linux/generic/backport-5.15/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch b/target/linux/generic/backport-5.15/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch new file mode 100644 index 0000000000..64a0e42079 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-06-netfilter-flowtable-move-FLOW_OFFLOAD_DIR_MAX-away-f.patch @@ -0,0 +1,82 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:24 +0100 +Subject: [PATCH] netfilter: flowtable: move FLOW_OFFLOAD_DIR_MAX away + from enumeration + +This allows to remove the default case which should not ever happen and +that was added to avoid gcc warnings on unhandled FLOW_OFFLOAD_DIR_MAX +enumeration case. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -86,8 +86,8 @@ static inline bool nf_flowtable_hw_offlo + enum flow_offload_tuple_dir { + FLOW_OFFLOAD_DIR_ORIGINAL = IP_CT_DIR_ORIGINAL, + FLOW_OFFLOAD_DIR_REPLY = IP_CT_DIR_REPLY, +- FLOW_OFFLOAD_DIR_MAX = IP_CT_DIR_MAX + }; ++#define FLOW_OFFLOAD_DIR_MAX IP_CT_DIR_MAX + + struct flow_offload_tuple { + union { +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -453,8 +453,6 @@ int nf_flow_snat_port(const struct flow_ + new_port = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_port; + hdr->dest = new_port; + break; +- default: +- return -1; + } + + return nf_flow_nat_port(skb, thoff, protocol, port, new_port); +@@ -481,8 +479,6 @@ int nf_flow_dnat_port(const struct flow_ + new_port = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_port; + hdr->source = new_port; + break; +- default: +- return -1; + } + + return nf_flow_nat_port(skb, thoff, protocol, port, new_port); +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -96,8 +96,6 @@ static int nf_flow_snat_ip(const struct + new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_v4.s_addr; + iph->daddr = new_addr; + break; +- default: +- return -1; + } + csum_replace4(&iph->check, addr, new_addr); + +@@ -121,8 +119,6 @@ static int nf_flow_dnat_ip(const struct + new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_v4.s_addr; + iph->saddr = new_addr; + break; +- default: +- return -1; + } + csum_replace4(&iph->check, addr, new_addr); + +@@ -371,8 +367,6 @@ static int nf_flow_snat_ipv6(const struc + new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.src_v6; + ip6h->daddr = new_addr; + break; +- default: +- return -1; + } + + return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); +@@ -396,8 +390,6 @@ static int nf_flow_dnat_ipv6(const struc + new_addr = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_v6; + ip6h->saddr = new_addr; + break; +- default: +- return -1; + } + + return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); diff --git a/target/linux/generic/backport-5.15/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch b/target/linux/generic/backport-5.15/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch new file mode 100644 index 0000000000..2224e095c9 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-07-netfilter-flowtable-fast-NAT-functions-never-fail.patch @@ -0,0 +1,394 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:25 +0100 +Subject: [PATCH] netfilter: flowtable: fast NAT functions never fail + +Simplify existing fast NAT routines by returning void. After the +skb_try_make_writable() call consolidation, these routines cannot ever +fail. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -228,12 +228,12 @@ void nf_flow_table_free(struct nf_flowta + + void flow_offload_teardown(struct flow_offload *flow); + +-int nf_flow_snat_port(const struct flow_offload *flow, +- struct sk_buff *skb, unsigned int thoff, +- u8 protocol, enum flow_offload_tuple_dir dir); +-int nf_flow_dnat_port(const struct flow_offload *flow, +- struct sk_buff *skb, unsigned int thoff, +- u8 protocol, enum flow_offload_tuple_dir dir); ++void nf_flow_snat_port(const struct flow_offload *flow, ++ struct sk_buff *skb, unsigned int thoff, ++ u8 protocol, enum flow_offload_tuple_dir dir); ++void nf_flow_dnat_port(const struct flow_offload *flow, ++ struct sk_buff *skb, unsigned int thoff, ++ u8 protocol, enum flow_offload_tuple_dir dir); + + struct flow_ports { + __be16 source, dest; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -388,20 +388,17 @@ static void nf_flow_offload_work_gc(stru + queue_delayed_work(system_power_efficient_wq, &flow_table->gc_work, HZ); + } + +- +-static int nf_flow_nat_port_tcp(struct sk_buff *skb, unsigned int thoff, +- __be16 port, __be16 new_port) ++static void nf_flow_nat_port_tcp(struct sk_buff *skb, unsigned int thoff, ++ __be16 port, __be16 new_port) + { + struct tcphdr *tcph; + + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace2(&tcph->check, skb, port, new_port, false); +- +- return 0; + } + +-static int nf_flow_nat_port_udp(struct sk_buff *skb, unsigned int thoff, +- __be16 port, __be16 new_port) ++static void nf_flow_nat_port_udp(struct sk_buff *skb, unsigned int thoff, ++ __be16 port, __be16 new_port) + { + struct udphdr *udph; + +@@ -412,30 +409,24 @@ static int nf_flow_nat_port_udp(struct s + if (!udph->check) + udph->check = CSUM_MANGLED_0; + } +- +- return 0; + } + +-static int nf_flow_nat_port(struct sk_buff *skb, unsigned int thoff, +- u8 protocol, __be16 port, __be16 new_port) ++static void nf_flow_nat_port(struct sk_buff *skb, unsigned int thoff, ++ u8 protocol, __be16 port, __be16 new_port) + { + switch (protocol) { + case IPPROTO_TCP: +- if (nf_flow_nat_port_tcp(skb, thoff, port, new_port) < 0) +- return NF_DROP; ++ nf_flow_nat_port_tcp(skb, thoff, port, new_port); + break; + case IPPROTO_UDP: +- if (nf_flow_nat_port_udp(skb, thoff, port, new_port) < 0) +- return NF_DROP; ++ nf_flow_nat_port_udp(skb, thoff, port, new_port); + break; + } +- +- return 0; + } + +-int nf_flow_snat_port(const struct flow_offload *flow, +- struct sk_buff *skb, unsigned int thoff, +- u8 protocol, enum flow_offload_tuple_dir dir) ++void nf_flow_snat_port(const struct flow_offload *flow, ++ struct sk_buff *skb, unsigned int thoff, ++ u8 protocol, enum flow_offload_tuple_dir dir) + { + struct flow_ports *hdr; + __be16 port, new_port; +@@ -455,13 +446,13 @@ int nf_flow_snat_port(const struct flow_ + break; + } + +- return nf_flow_nat_port(skb, thoff, protocol, port, new_port); ++ nf_flow_nat_port(skb, thoff, protocol, port, new_port); + } + EXPORT_SYMBOL_GPL(nf_flow_snat_port); + +-int nf_flow_dnat_port(const struct flow_offload *flow, +- struct sk_buff *skb, unsigned int thoff, +- u8 protocol, enum flow_offload_tuple_dir dir) ++void nf_flow_dnat_port(const struct flow_offload *flow, struct sk_buff *skb, ++ unsigned int thoff, u8 protocol, ++ enum flow_offload_tuple_dir dir) + { + struct flow_ports *hdr; + __be16 port, new_port; +@@ -481,7 +472,7 @@ int nf_flow_dnat_port(const struct flow_ + break; + } + +- return nf_flow_nat_port(skb, thoff, protocol, port, new_port); ++ nf_flow_nat_port(skb, thoff, protocol, port, new_port); + } + EXPORT_SYMBOL_GPL(nf_flow_dnat_port); + +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -34,19 +34,17 @@ static int nf_flow_state_check(struct fl + return 0; + } + +-static int nf_flow_nat_ip_tcp(struct sk_buff *skb, unsigned int thoff, +- __be32 addr, __be32 new_addr) ++static void nf_flow_nat_ip_tcp(struct sk_buff *skb, unsigned int thoff, ++ __be32 addr, __be32 new_addr) + { + struct tcphdr *tcph; + + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace4(&tcph->check, skb, addr, new_addr, true); +- +- return 0; + } + +-static int nf_flow_nat_ip_udp(struct sk_buff *skb, unsigned int thoff, +- __be32 addr, __be32 new_addr) ++static void nf_flow_nat_ip_udp(struct sk_buff *skb, unsigned int thoff, ++ __be32 addr, __be32 new_addr) + { + struct udphdr *udph; + +@@ -57,31 +55,25 @@ static int nf_flow_nat_ip_udp(struct sk_ + if (!udph->check) + udph->check = CSUM_MANGLED_0; + } +- +- return 0; + } + +-static int nf_flow_nat_ip_l4proto(struct sk_buff *skb, struct iphdr *iph, +- unsigned int thoff, __be32 addr, +- __be32 new_addr) ++static void nf_flow_nat_ip_l4proto(struct sk_buff *skb, struct iphdr *iph, ++ unsigned int thoff, __be32 addr, ++ __be32 new_addr) + { + switch (iph->protocol) { + case IPPROTO_TCP: +- if (nf_flow_nat_ip_tcp(skb, thoff, addr, new_addr) < 0) +- return NF_DROP; ++ nf_flow_nat_ip_tcp(skb, thoff, addr, new_addr); + break; + case IPPROTO_UDP: +- if (nf_flow_nat_ip_udp(skb, thoff, addr, new_addr) < 0) +- return NF_DROP; ++ nf_flow_nat_ip_udp(skb, thoff, addr, new_addr); + break; + } +- +- return 0; + } + +-static int nf_flow_snat_ip(const struct flow_offload *flow, struct sk_buff *skb, +- struct iphdr *iph, unsigned int thoff, +- enum flow_offload_tuple_dir dir) ++static void nf_flow_snat_ip(const struct flow_offload *flow, ++ struct sk_buff *skb, struct iphdr *iph, ++ unsigned int thoff, enum flow_offload_tuple_dir dir) + { + __be32 addr, new_addr; + +@@ -99,12 +91,12 @@ static int nf_flow_snat_ip(const struct + } + csum_replace4(&iph->check, addr, new_addr); + +- return nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr); ++ nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr); + } + +-static int nf_flow_dnat_ip(const struct flow_offload *flow, struct sk_buff *skb, +- struct iphdr *iph, unsigned int thoff, +- enum flow_offload_tuple_dir dir) ++static void nf_flow_dnat_ip(const struct flow_offload *flow, ++ struct sk_buff *skb, struct iphdr *iph, ++ unsigned int thoff, enum flow_offload_tuple_dir dir) + { + __be32 addr, new_addr; + +@@ -122,24 +114,21 @@ static int nf_flow_dnat_ip(const struct + } + csum_replace4(&iph->check, addr, new_addr); + +- return nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr); ++ nf_flow_nat_ip_l4proto(skb, iph, thoff, addr, new_addr); + } + +-static int nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb, ++static void nf_flow_nat_ip(const struct flow_offload *flow, struct sk_buff *skb, + unsigned int thoff, enum flow_offload_tuple_dir dir, + struct iphdr *iph) + { +- if (test_bit(NF_FLOW_SNAT, &flow->flags) && +- (nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir) < 0 || +- nf_flow_snat_ip(flow, skb, iph, thoff, dir) < 0)) +- return -1; +- +- if (test_bit(NF_FLOW_DNAT, &flow->flags) && +- (nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir) < 0 || +- nf_flow_dnat_ip(flow, skb, iph, thoff, dir) < 0)) +- return -1; +- +- return 0; ++ if (test_bit(NF_FLOW_SNAT, &flow->flags)) { ++ nf_flow_snat_port(flow, skb, thoff, iph->protocol, dir); ++ nf_flow_snat_ip(flow, skb, iph, thoff, dir); ++ } ++ if (test_bit(NF_FLOW_DNAT, &flow->flags)) { ++ nf_flow_dnat_port(flow, skb, thoff, iph->protocol, dir); ++ nf_flow_dnat_ip(flow, skb, iph, thoff, dir); ++ } + } + + static bool ip_has_options(unsigned int thoff) +@@ -276,8 +265,7 @@ nf_flow_offload_ip_hook(void *priv, stru + return NF_DROP; + + iph = ip_hdr(skb); +- if (nf_flow_nat_ip(flow, skb, thoff, dir, iph) < 0) +- return NF_DROP; ++ nf_flow_nat_ip(flow, skb, thoff, dir, iph); + + ip_decrease_ttl(iph); + skb->tstamp = 0; +@@ -301,22 +289,21 @@ nf_flow_offload_ip_hook(void *priv, stru + } + EXPORT_SYMBOL_GPL(nf_flow_offload_ip_hook); + +-static int nf_flow_nat_ipv6_tcp(struct sk_buff *skb, unsigned int thoff, +- struct in6_addr *addr, +- struct in6_addr *new_addr) ++static void nf_flow_nat_ipv6_tcp(struct sk_buff *skb, unsigned int thoff, ++ struct in6_addr *addr, ++ struct in6_addr *new_addr, ++ struct ipv6hdr *ip6h) + { + struct tcphdr *tcph; + + tcph = (void *)(skb_network_header(skb) + thoff); + inet_proto_csum_replace16(&tcph->check, skb, addr->s6_addr32, + new_addr->s6_addr32, true); +- +- return 0; + } + +-static int nf_flow_nat_ipv6_udp(struct sk_buff *skb, unsigned int thoff, +- struct in6_addr *addr, +- struct in6_addr *new_addr) ++static void nf_flow_nat_ipv6_udp(struct sk_buff *skb, unsigned int thoff, ++ struct in6_addr *addr, ++ struct in6_addr *new_addr) + { + struct udphdr *udph; + +@@ -327,32 +314,26 @@ static int nf_flow_nat_ipv6_udp(struct s + if (!udph->check) + udph->check = CSUM_MANGLED_0; + } +- +- return 0; + } + +-static int nf_flow_nat_ipv6_l4proto(struct sk_buff *skb, struct ipv6hdr *ip6h, +- unsigned int thoff, struct in6_addr *addr, +- struct in6_addr *new_addr) ++static void nf_flow_nat_ipv6_l4proto(struct sk_buff *skb, struct ipv6hdr *ip6h, ++ unsigned int thoff, struct in6_addr *addr, ++ struct in6_addr *new_addr) + { + switch (ip6h->nexthdr) { + case IPPROTO_TCP: +- if (nf_flow_nat_ipv6_tcp(skb, thoff, addr, new_addr) < 0) +- return NF_DROP; ++ nf_flow_nat_ipv6_tcp(skb, thoff, addr, new_addr, ip6h); + break; + case IPPROTO_UDP: +- if (nf_flow_nat_ipv6_udp(skb, thoff, addr, new_addr) < 0) +- return NF_DROP; ++ nf_flow_nat_ipv6_udp(skb, thoff, addr, new_addr); + break; + } +- +- return 0; + } + +-static int nf_flow_snat_ipv6(const struct flow_offload *flow, +- struct sk_buff *skb, struct ipv6hdr *ip6h, +- unsigned int thoff, +- enum flow_offload_tuple_dir dir) ++static void nf_flow_snat_ipv6(const struct flow_offload *flow, ++ struct sk_buff *skb, struct ipv6hdr *ip6h, ++ unsigned int thoff, ++ enum flow_offload_tuple_dir dir) + { + struct in6_addr addr, new_addr; + +@@ -369,13 +350,13 @@ static int nf_flow_snat_ipv6(const struc + break; + } + +- return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); ++ nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); + } + +-static int nf_flow_dnat_ipv6(const struct flow_offload *flow, +- struct sk_buff *skb, struct ipv6hdr *ip6h, +- unsigned int thoff, +- enum flow_offload_tuple_dir dir) ++static void nf_flow_dnat_ipv6(const struct flow_offload *flow, ++ struct sk_buff *skb, struct ipv6hdr *ip6h, ++ unsigned int thoff, ++ enum flow_offload_tuple_dir dir) + { + struct in6_addr addr, new_addr; + +@@ -392,27 +373,24 @@ static int nf_flow_dnat_ipv6(const struc + break; + } + +- return nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); ++ nf_flow_nat_ipv6_l4proto(skb, ip6h, thoff, &addr, &new_addr); + } + +-static int nf_flow_nat_ipv6(const struct flow_offload *flow, +- struct sk_buff *skb, +- enum flow_offload_tuple_dir dir, +- struct ipv6hdr *ip6h) ++static void nf_flow_nat_ipv6(const struct flow_offload *flow, ++ struct sk_buff *skb, ++ enum flow_offload_tuple_dir dir, ++ struct ipv6hdr *ip6h) + { + unsigned int thoff = sizeof(*ip6h); + +- if (test_bit(NF_FLOW_SNAT, &flow->flags) && +- (nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 || +- nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir) < 0)) +- return -1; +- +- if (test_bit(NF_FLOW_DNAT, &flow->flags) && +- (nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir) < 0 || +- nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir) < 0)) +- return -1; +- +- return 0; ++ if (test_bit(NF_FLOW_SNAT, &flow->flags)) { ++ nf_flow_snat_port(flow, skb, thoff, ip6h->nexthdr, dir); ++ nf_flow_snat_ipv6(flow, skb, ip6h, thoff, dir); ++ } ++ if (test_bit(NF_FLOW_DNAT, &flow->flags)) { ++ nf_flow_dnat_port(flow, skb, thoff, ip6h->nexthdr, dir); ++ nf_flow_dnat_ipv6(flow, skb, ip6h, thoff, dir); ++ } + } + + static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev, +@@ -507,8 +485,7 @@ nf_flow_offload_ipv6_hook(void *priv, st + return NF_DROP; + + ip6h = ipv6_hdr(skb); +- if (nf_flow_nat_ipv6(flow, skb, dir, ip6h) < 0) +- return NF_DROP; ++ nf_flow_nat_ipv6(flow, skb, dir, ip6h); + + ip6h->hop_limit--; + skb->tstamp = 0; diff --git a/target/linux/generic/backport-5.15/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch b/target/linux/generic/backport-5.15/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch new file mode 100644 index 0000000000..276785030d --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-08-netfilter-flowtable-call-dst_check-to-fall-back-to-c.patch @@ -0,0 +1,46 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:26 +0100 +Subject: [PATCH] netfilter: flowtable: call dst_check() to fall back to + classic forwarding + +In case the route is stale, pass up the packet to the classic forwarding +path for re-evaluation and schedule this flow entry for removal. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -197,14 +197,6 @@ static bool nf_flow_exceeds_mtu(const st + return true; + } + +-static int nf_flow_offload_dst_check(struct dst_entry *dst) +-{ +- if (unlikely(dst_xfrm(dst))) +- return dst_check(dst, 0) ? 0 : -1; +- +- return 0; +-} +- + static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb, + const struct nf_hook_state *state, + struct dst_entry *dst) +@@ -256,7 +248,7 @@ nf_flow_offload_ip_hook(void *priv, stru + + flow_offload_refresh(flow_table, flow); + +- if (nf_flow_offload_dst_check(&rt->dst)) { ++ if (!dst_check(&rt->dst, 0)) { + flow_offload_teardown(flow); + return NF_ACCEPT; + } +@@ -476,7 +468,7 @@ nf_flow_offload_ipv6_hook(void *priv, st + + flow_offload_refresh(flow_table, flow); + +- if (nf_flow_offload_dst_check(&rt->dst)) { ++ if (!dst_check(&rt->dst, 0)) { + flow_offload_teardown(flow); + return NF_ACCEPT; + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch b/target/linux/generic/backport-5.15/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch new file mode 100644 index 0000000000..14ac2ee295 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-09-netfilter-flowtable-refresh-timeout-after-dst-and-wr.patch @@ -0,0 +1,49 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:27 +0100 +Subject: [PATCH] netfilter: flowtable: refresh timeout after dst and + writable checks + +Refresh the timeout (and retry hardware offload) once the skbuff dst +is confirmed to be current and after the skbuff is made writable. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -246,8 +246,6 @@ nf_flow_offload_ip_hook(void *priv, stru + if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + +- flow_offload_refresh(flow_table, flow); +- + if (!dst_check(&rt->dst, 0)) { + flow_offload_teardown(flow); + return NF_ACCEPT; +@@ -256,6 +254,8 @@ nf_flow_offload_ip_hook(void *priv, stru + if (skb_try_make_writable(skb, thoff + hdrsize)) + return NF_DROP; + ++ flow_offload_refresh(flow_table, flow); ++ + iph = ip_hdr(skb); + nf_flow_nat_ip(flow, skb, thoff, dir, iph); + +@@ -466,8 +466,6 @@ nf_flow_offload_ipv6_hook(void *priv, st + sizeof(*ip6h))) + return NF_ACCEPT; + +- flow_offload_refresh(flow_table, flow); +- + if (!dst_check(&rt->dst, 0)) { + flow_offload_teardown(flow); + return NF_ACCEPT; +@@ -476,6 +474,8 @@ nf_flow_offload_ipv6_hook(void *priv, st + if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize)) + return NF_DROP; + ++ flow_offload_refresh(flow_table, flow); ++ + ip6h = ipv6_hdr(skb); + nf_flow_nat_ipv6(flow, skb, dir, ip6h); + diff --git a/target/linux/generic/backport-5.15/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch b/target/linux/generic/backport-5.15/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch new file mode 100644 index 0000000000..fa6e0c4173 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch @@ -0,0 +1,103 @@ +From: Pablo Neira Ayuso +Date: Tue, 23 Mar 2021 00:56:28 +0100 +Subject: [PATCH] netfilter: nftables: update table flags from the commit + phase + +Do not update table flags from the preparation phase. Store the flags +update into the transaction, then update the flags from the commit +phase. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_tables.h ++++ b/include/net/netfilter/nf_tables.h +@@ -1470,13 +1470,16 @@ struct nft_trans_chain { + + struct nft_trans_table { + bool update; +- bool enable; ++ u8 state; ++ u32 flags; + }; + + #define nft_trans_table_update(trans) \ + (((struct nft_trans_table *)trans->data)->update) +-#define nft_trans_table_enable(trans) \ +- (((struct nft_trans_table *)trans->data)->enable) ++#define nft_trans_table_state(trans) \ ++ (((struct nft_trans_table *)trans->data)->state) ++#define nft_trans_table_flags(trans) \ ++ (((struct nft_trans_table *)trans->data)->flags) + + struct nft_trans_elem { + struct nft_set *set; +--- a/net/netfilter/nf_tables_api.c ++++ b/net/netfilter/nf_tables_api.c +@@ -891,6 +891,12 @@ static void nf_tables_table_disable(stru + nft_table_disable(net, table, 0); + } + ++enum { ++ NFT_TABLE_STATE_UNCHANGED = 0, ++ NFT_TABLE_STATE_DORMANT, ++ NFT_TABLE_STATE_WAKEUP ++}; ++ + static int nf_tables_updtable(struct nft_ctx *ctx) + { + struct nft_trans *trans; +@@ -914,19 +920,17 @@ static int nf_tables_updtable(struct nft + + if ((flags & NFT_TABLE_F_DORMANT) && + !(ctx->table->flags & NFT_TABLE_F_DORMANT)) { +- nft_trans_table_enable(trans) = false; ++ nft_trans_table_state(trans) = NFT_TABLE_STATE_DORMANT; + } else if (!(flags & NFT_TABLE_F_DORMANT) && + ctx->table->flags & NFT_TABLE_F_DORMANT) { +- ctx->table->flags &= ~NFT_TABLE_F_DORMANT; + ret = nf_tables_table_enable(ctx->net, ctx->table); + if (ret >= 0) +- nft_trans_table_enable(trans) = true; +- else +- ctx->table->flags |= NFT_TABLE_F_DORMANT; ++ nft_trans_table_state(trans) = NFT_TABLE_STATE_WAKEUP; + } + if (ret < 0) + goto err; + ++ nft_trans_table_flags(trans) = flags; + nft_trans_table_update(trans) = true; + list_add_tail(&trans->list, &ctx->net->nft.commit_list); + return 0; +@@ -7908,11 +7912,10 @@ static int nf_tables_commit(struct net * + switch (trans->msg_type) { + case NFT_MSG_NEWTABLE: + if (nft_trans_table_update(trans)) { +- if (!nft_trans_table_enable(trans)) { +- nf_tables_table_disable(net, +- trans->ctx.table); +- trans->ctx.table->flags |= NFT_TABLE_F_DORMANT; +- } ++ if (nft_trans_table_state(trans) == NFT_TABLE_STATE_DORMANT) ++ nf_tables_table_disable(net, trans->ctx.table); ++ ++ trans->ctx.table->flags = nft_trans_table_flags(trans); + } else { + nft_clear(net, trans->ctx.table); + } +@@ -8125,11 +8128,9 @@ static int __nf_tables_abort(struct net + switch (trans->msg_type) { + case NFT_MSG_NEWTABLE: + if (nft_trans_table_update(trans)) { +- if (nft_trans_table_enable(trans)) { +- nf_tables_table_disable(net, +- trans->ctx.table); +- trans->ctx.table->flags |= NFT_TABLE_F_DORMANT; +- } ++ if (nft_trans_table_state(trans) == NFT_TABLE_STATE_WAKEUP) ++ nf_tables_table_disable(net, trans->ctx.table); ++ + nft_trans_destroy(trans); + } else { + list_del_rcu(&trans->ctx.table->list); diff --git a/target/linux/generic/backport-5.15/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch b/target/linux/generic/backport-5.15/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch new file mode 100644 index 0000000000..a8fc1cabe2 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-11-net-resolve-forwarding-path-from-virtual-netdevice-a.patch @@ -0,0 +1,170 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:32 +0100 +Subject: [PATCH] net: resolve forwarding path from virtual netdevice and + HW destination address + +This patch adds dev_fill_forward_path() which resolves the path to reach +the real netdevice from the IP forwarding side. This function takes as +input the netdevice and the destination hardware address and it walks +down the devices calling .ndo_fill_forward_path() for each device until +the real device is found. + +For instance, assuming the following topology: + + IP forwarding + / \ + br0 eth0 + / \ + eth1 eth2 + . + . + . + ethX + ab:cd:ef:ab:cd:ef + +where eth1 and eth2 are bridge ports and eth0 provides WAN connectivity. +ethX is the interface in another box which is connected to the eth1 +bridge port. + +For packets going through IP forwarding to br0 whose destination MAC +address is ab:cd:ef:ab:cd:ef, dev_fill_forward_path() provides the +following path: + + br0 -> eth1 + +.ndo_fill_forward_path for br0 looks up at the FDB for the bridge port +from the destination MAC address to get the bridge port eth1. + +This information allows to create a fast path that bypasses the classic +bridge and IP forwarding paths, so packets go directly from the bridge +port eth1 to eth0 (wan interface) and vice versa. + + fast path + .------------------------. + / \ + | IP forwarding | + | / \ \/ + | br0 eth0 + . / \ + -> eth1 eth2 + . + . + . + ethX + ab:cd:ef:ab:cd:ef + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -827,6 +827,27 @@ typedef u16 (*select_queue_fallback_t)(s + struct sk_buff *skb, + struct net_device *sb_dev); + ++enum net_device_path_type { ++ DEV_PATH_ETHERNET = 0, ++}; ++ ++struct net_device_path { ++ enum net_device_path_type type; ++ const struct net_device *dev; ++}; ++ ++#define NET_DEVICE_PATH_STACK_MAX 5 ++ ++struct net_device_path_stack { ++ int num_paths; ++ struct net_device_path path[NET_DEVICE_PATH_STACK_MAX]; ++}; ++ ++struct net_device_path_ctx { ++ const struct net_device *dev; ++ const u8 *daddr; ++}; ++ + enum tc_setup_type { + TC_SETUP_QDISC_MQPRIO, + TC_SETUP_CLSU32, +@@ -1273,6 +1294,8 @@ struct netdev_net_notifier { + * struct net_device *(*ndo_get_peer_dev)(struct net_device *dev); + * If a device is paired with a peer device, return the peer instance. + * The caller must be under RCU read context. ++ * int (*ndo_fill_forward_path)(struct net_device_path_ctx *ctx, struct net_device_path *path); ++ * Get the forwarding path to reach the real device from the HW destination address + */ + struct net_device_ops { + int (*ndo_init)(struct net_device *dev); +@@ -1481,6 +1504,8 @@ struct net_device_ops { + int (*ndo_tunnel_ctl)(struct net_device *dev, + struct ip_tunnel_parm *p, int cmd); + struct net_device * (*ndo_get_peer_dev)(struct net_device *dev); ++ int (*ndo_fill_forward_path)(struct net_device_path_ctx *ctx, ++ struct net_device_path *path); + }; + + /** +@@ -2828,6 +2853,8 @@ void dev_remove_offload(struct packet_of + + int dev_get_iflink(const struct net_device *dev); + int dev_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb); ++int dev_fill_forward_path(const struct net_device *dev, const u8 *daddr, ++ struct net_device_path_stack *stack); + struct net_device *__dev_get_by_flags(struct net *net, unsigned short flags, + unsigned short mask); + struct net_device *dev_get_by_name(struct net *net, const char *name); +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -847,6 +847,52 @@ int dev_fill_metadata_dst(struct net_dev + } + EXPORT_SYMBOL_GPL(dev_fill_metadata_dst); + ++static struct net_device_path *dev_fwd_path(struct net_device_path_stack *stack) ++{ ++ int k = stack->num_paths++; ++ ++ if (WARN_ON_ONCE(k >= NET_DEVICE_PATH_STACK_MAX)) ++ return NULL; ++ ++ return &stack->path[k]; ++} ++ ++int dev_fill_forward_path(const struct net_device *dev, const u8 *daddr, ++ struct net_device_path_stack *stack) ++{ ++ const struct net_device *last_dev; ++ struct net_device_path_ctx ctx = { ++ .dev = dev, ++ .daddr = daddr, ++ }; ++ struct net_device_path *path; ++ int ret = 0; ++ ++ stack->num_paths = 0; ++ while (ctx.dev && ctx.dev->netdev_ops->ndo_fill_forward_path) { ++ last_dev = ctx.dev; ++ path = dev_fwd_path(stack); ++ if (!path) ++ return -1; ++ ++ memset(path, 0, sizeof(struct net_device_path)); ++ ret = ctx.dev->netdev_ops->ndo_fill_forward_path(&ctx, path); ++ if (ret < 0) ++ return -1; ++ ++ if (WARN_ON_ONCE(last_dev == ctx.dev)) ++ return -1; ++ } ++ path = dev_fwd_path(stack); ++ if (!path) ++ return -1; ++ path->type = DEV_PATH_ETHERNET; ++ path->dev = ctx.dev; ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(dev_fill_forward_path); ++ + /** + * __dev_get_by_name - find a device by its name + * @net: the applicable net namespace diff --git a/target/linux/generic/backport-5.15/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch b/target/linux/generic/backport-5.15/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch new file mode 100644 index 0000000000..32c8c9bb78 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-12-net-8021q-resolve-forwarding-path-for-vlan-devices.patch @@ -0,0 +1,80 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:33 +0100 +Subject: [PATCH] net: 8021q: resolve forwarding path for vlan devices + +Add .ndo_fill_forward_path for vlan devices. + +For instance, assuming the following topology: + + IP forwarding + / \ + eth0.100 eth0 + | + eth0 + . + . + . + ethX + ab:cd:ef:ab:cd:ef + +For packets going through IP forwarding to eth0.100 whose destination +MAC address is ab:cd:ef:ab:cd:ef, dev_fill_forward_path() provides the +following path: + + eth0.100 -> eth0 + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -829,11 +829,18 @@ typedef u16 (*select_queue_fallback_t)(s + + enum net_device_path_type { + DEV_PATH_ETHERNET = 0, ++ DEV_PATH_VLAN, + }; + + struct net_device_path { + enum net_device_path_type type; + const struct net_device *dev; ++ union { ++ struct { ++ u16 id; ++ __be16 proto; ++ } encap; ++ }; + }; + + #define NET_DEVICE_PATH_STACK_MAX 5 +--- a/net/8021q/vlan_dev.c ++++ b/net/8021q/vlan_dev.c +@@ -770,6 +770,20 @@ static int vlan_dev_get_iflink(const str + return real_dev->ifindex; + } + ++static int vlan_dev_fill_forward_path(struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++ struct vlan_dev_priv *vlan = vlan_dev_priv(ctx->dev); ++ ++ path->type = DEV_PATH_VLAN; ++ path->encap.id = vlan->vlan_id; ++ path->encap.proto = vlan->vlan_proto; ++ path->dev = ctx->dev; ++ ctx->dev = vlan->real_dev; ++ ++ return 0; ++} ++ + static const struct ethtool_ops vlan_ethtool_ops = { + .get_link_ksettings = vlan_ethtool_get_link_ksettings, + .get_drvinfo = vlan_ethtool_get_drvinfo, +@@ -808,6 +822,7 @@ static const struct net_device_ops vlan_ + #endif + .ndo_fix_features = vlan_dev_fix_features, + .ndo_get_iflink = vlan_dev_get_iflink, ++ .ndo_fill_forward_path = vlan_dev_fill_forward_path, + }; + + static void vlan_dev_free(struct net_device *dev) diff --git a/target/linux/generic/backport-5.15/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch b/target/linux/generic/backport-5.15/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch new file mode 100644 index 0000000000..bdb12b13a6 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-13-net-bridge-resolve-forwarding-path-for-bridge-device.patch @@ -0,0 +1,62 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:34 +0100 +Subject: [PATCH] net: bridge: resolve forwarding path for bridge devices + +Add .ndo_fill_forward_path for bridge devices. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -830,6 +830,7 @@ typedef u16 (*select_queue_fallback_t)(s + enum net_device_path_type { + DEV_PATH_ETHERNET = 0, + DEV_PATH_VLAN, ++ DEV_PATH_BRIDGE, + }; + + struct net_device_path { +--- a/net/bridge/br_device.c ++++ b/net/bridge/br_device.c +@@ -398,6 +398,32 @@ static int br_del_slave(struct net_devic + return br_del_if(br, slave_dev); + } + ++static int br_fill_forward_path(struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++ struct net_bridge_fdb_entry *f; ++ struct net_bridge_port *dst; ++ struct net_bridge *br; ++ ++ if (netif_is_bridge_port(ctx->dev)) ++ return -1; ++ ++ br = netdev_priv(ctx->dev); ++ f = br_fdb_find_rcu(br, ctx->daddr, 0); ++ if (!f || !f->dst) ++ return -1; ++ ++ dst = READ_ONCE(f->dst); ++ if (!dst) ++ return -1; ++ ++ path->type = DEV_PATH_BRIDGE; ++ path->dev = dst->br->dev; ++ ctx->dev = dst->dev; ++ ++ return 0; ++} ++ + static const struct ethtool_ops br_ethtool_ops = { + .get_drvinfo = br_getinfo, + .get_link = ethtool_op_get_link, +@@ -432,6 +458,7 @@ static const struct net_device_ops br_ne + .ndo_bridge_setlink = br_setlink, + .ndo_bridge_dellink = br_dellink, + .ndo_features_check = passthru_features_check, ++ .ndo_fill_forward_path = br_fill_forward_path, + }; + + static struct device_type br_type = { diff --git a/target/linux/generic/backport-5.15/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch b/target/linux/generic/backport-5.15/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch new file mode 100644 index 0000000000..ba2b1a2877 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-14-net-bridge-resolve-forwarding-path-for-VLAN-tag-acti.patch @@ -0,0 +1,207 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:35 +0100 +Subject: [PATCH] net: bridge: resolve forwarding path for VLAN tag + actions in bridge devices + +Depending on the VLAN settings of the bridge and the port, the bridge can +either add or remove a tag. When vlan filtering is enabled, the fdb lookup +also needs to know the VLAN tag/proto for the destination address +To provide this, keep track of the stack of VLAN tags for the path in the +lookup context + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -841,10 +841,20 @@ struct net_device_path { + u16 id; + __be16 proto; + } encap; ++ struct { ++ enum { ++ DEV_PATH_BR_VLAN_KEEP, ++ DEV_PATH_BR_VLAN_TAG, ++ DEV_PATH_BR_VLAN_UNTAG, ++ } vlan_mode; ++ u16 vlan_id; ++ __be16 vlan_proto; ++ } bridge; + }; + }; + + #define NET_DEVICE_PATH_STACK_MAX 5 ++#define NET_DEVICE_PATH_VLAN_MAX 2 + + struct net_device_path_stack { + int num_paths; +@@ -854,6 +864,12 @@ struct net_device_path_stack { + struct net_device_path_ctx { + const struct net_device *dev; + const u8 *daddr; ++ ++ int num_vlans; ++ struct { ++ u16 id; ++ __be16 proto; ++ } vlan[NET_DEVICE_PATH_VLAN_MAX]; + }; + + enum tc_setup_type { +--- a/net/8021q/vlan_dev.c ++++ b/net/8021q/vlan_dev.c +@@ -780,6 +780,12 @@ static int vlan_dev_fill_forward_path(st + path->encap.proto = vlan->vlan_proto; + path->dev = ctx->dev; + ctx->dev = vlan->real_dev; ++ if (ctx->num_vlans >= ARRAY_SIZE(ctx->vlan)) ++ return -ENOSPC; ++ ++ ctx->vlan[ctx->num_vlans].id = vlan->vlan_id; ++ ctx->vlan[ctx->num_vlans].proto = vlan->vlan_proto; ++ ctx->num_vlans++; + + return 0; + } +--- a/net/bridge/br_device.c ++++ b/net/bridge/br_device.c +@@ -409,7 +409,10 @@ static int br_fill_forward_path(struct n + return -1; + + br = netdev_priv(ctx->dev); +- f = br_fdb_find_rcu(br, ctx->daddr, 0); ++ ++ br_vlan_fill_forward_path_pvid(br, ctx, path); ++ ++ f = br_fdb_find_rcu(br, ctx->daddr, path->bridge.vlan_id); + if (!f || !f->dst) + return -1; + +@@ -417,10 +420,28 @@ static int br_fill_forward_path(struct n + if (!dst) + return -1; + ++ if (br_vlan_fill_forward_path_mode(br, dst, path)) ++ return -1; ++ + path->type = DEV_PATH_BRIDGE; + path->dev = dst->br->dev; + ctx->dev = dst->dev; + ++ switch (path->bridge.vlan_mode) { ++ case DEV_PATH_BR_VLAN_TAG: ++ if (ctx->num_vlans >= ARRAY_SIZE(ctx->vlan)) ++ return -ENOSPC; ++ ctx->vlan[ctx->num_vlans].id = path->bridge.vlan_id; ++ ctx->vlan[ctx->num_vlans].proto = path->bridge.vlan_proto; ++ ctx->num_vlans++; ++ break; ++ case DEV_PATH_BR_VLAN_UNTAG: ++ ctx->num_vlans--; ++ break; ++ case DEV_PATH_BR_VLAN_KEEP: ++ break; ++ } ++ + return 0; + } + +--- a/net/bridge/br_private.h ++++ b/net/bridge/br_private.h +@@ -1093,6 +1093,13 @@ void br_vlan_notify(const struct net_bri + bool br_vlan_can_enter_range(const struct net_bridge_vlan *v_curr, + const struct net_bridge_vlan *range_end); + ++void br_vlan_fill_forward_path_pvid(struct net_bridge *br, ++ struct net_device_path_ctx *ctx, ++ struct net_device_path *path); ++int br_vlan_fill_forward_path_mode(struct net_bridge *br, ++ struct net_bridge_port *dst, ++ struct net_device_path *path); ++ + static inline struct net_bridge_vlan_group *br_vlan_group( + const struct net_bridge *br) + { +@@ -1250,6 +1257,19 @@ static inline int nbp_get_num_vlan_infos + { + return 0; + } ++ ++static inline void br_vlan_fill_forward_path_pvid(struct net_bridge *br, ++ struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++} ++ ++static inline int br_vlan_fill_forward_path_mode(struct net_bridge *br, ++ struct net_bridge_port *dst, ++ struct net_device_path *path) ++{ ++ return 0; ++} + + static inline struct net_bridge_vlan_group *br_vlan_group( + const struct net_bridge *br) +--- a/net/bridge/br_vlan.c ++++ b/net/bridge/br_vlan.c +@@ -1327,6 +1327,59 @@ int br_vlan_get_pvid_rcu(const struct ne + } + EXPORT_SYMBOL_GPL(br_vlan_get_pvid_rcu); + ++void br_vlan_fill_forward_path_pvid(struct net_bridge *br, ++ struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++ struct net_bridge_vlan_group *vg; ++ int idx = ctx->num_vlans - 1; ++ u16 vid; ++ ++ path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP; ++ ++ if (!br_opt_get(br, BROPT_VLAN_ENABLED)) ++ return; ++ ++ vg = br_vlan_group(br); ++ ++ if (idx >= 0 && ++ ctx->vlan[idx].proto == br->vlan_proto) { ++ vid = ctx->vlan[idx].id; ++ } else { ++ path->bridge.vlan_mode = DEV_PATH_BR_VLAN_TAG; ++ vid = br_get_pvid(vg); ++ } ++ ++ path->bridge.vlan_id = vid; ++ path->bridge.vlan_proto = br->vlan_proto; ++} ++ ++int br_vlan_fill_forward_path_mode(struct net_bridge *br, ++ struct net_bridge_port *dst, ++ struct net_device_path *path) ++{ ++ struct net_bridge_vlan_group *vg; ++ struct net_bridge_vlan *v; ++ ++ if (!br_opt_get(br, BROPT_VLAN_ENABLED)) ++ return 0; ++ ++ vg = nbp_vlan_group_rcu(dst); ++ v = br_vlan_find(vg, path->bridge.vlan_id); ++ if (!v || !br_vlan_should_use(v)) ++ return -EINVAL; ++ ++ if (!(v->flags & BRIDGE_VLAN_INFO_UNTAGGED)) ++ return 0; ++ ++ if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG) ++ path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP; ++ else ++ path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG; ++ ++ return 0; ++} ++ + int br_vlan_get_info(const struct net_device *dev, u16 vid, + struct bridge_vlan_info *p_vinfo) + { diff --git a/target/linux/generic/backport-5.15/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch b/target/linux/generic/backport-5.15/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch new file mode 100644 index 0000000000..712bb9ec97 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-15-net-ppp-resolve-forwarding-path-for-bridge-pppoe-dev.patch @@ -0,0 +1,113 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:36 +0100 +Subject: [PATCH] net: ppp: resolve forwarding path for bridge pppoe + devices + +Pass on the PPPoE session ID, destination hardware address and the real +device. + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/drivers/net/ppp/ppp_generic.c ++++ b/drivers/net/ppp/ppp_generic.c +@@ -1466,12 +1466,34 @@ static void ppp_dev_priv_destructor(stru + ppp_destroy_interface(ppp); + } + ++static int ppp_fill_forward_path(struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++ struct ppp *ppp = netdev_priv(ctx->dev); ++ struct ppp_channel *chan; ++ struct channel *pch; ++ ++ if (ppp->flags & SC_MULTILINK) ++ return -EOPNOTSUPP; ++ ++ if (list_empty(&ppp->channels)) ++ return -ENODEV; ++ ++ pch = list_first_entry(&ppp->channels, struct channel, clist); ++ chan = pch->chan; ++ if (!chan->ops->fill_forward_path) ++ return -EOPNOTSUPP; ++ ++ return chan->ops->fill_forward_path(ctx, path, chan); ++} ++ + static const struct net_device_ops ppp_netdev_ops = { + .ndo_init = ppp_dev_init, + .ndo_uninit = ppp_dev_uninit, + .ndo_start_xmit = ppp_start_xmit, + .ndo_do_ioctl = ppp_net_ioctl, + .ndo_get_stats64 = ppp_get_stats64, ++ .ndo_fill_forward_path = ppp_fill_forward_path, + }; + + static struct device_type ppp_type = { +--- a/drivers/net/ppp/pppoe.c ++++ b/drivers/net/ppp/pppoe.c +@@ -972,8 +972,31 @@ static int pppoe_xmit(struct ppp_channel + return __pppoe_xmit(sk, skb); + } + ++static int pppoe_fill_forward_path(struct net_device_path_ctx *ctx, ++ struct net_device_path *path, ++ const struct ppp_channel *chan) ++{ ++ struct sock *sk = (struct sock *)chan->private; ++ struct pppox_sock *po = pppox_sk(sk); ++ struct net_device *dev = po->pppoe_dev; ++ ++ if (sock_flag(sk, SOCK_DEAD) || ++ !(sk->sk_state & PPPOX_CONNECTED) || !dev) ++ return -1; ++ ++ path->type = DEV_PATH_PPPOE; ++ path->encap.proto = htons(ETH_P_PPP_SES); ++ path->encap.id = be16_to_cpu(po->num); ++ memcpy(path->encap.h_dest, po->pppoe_pa.remote, ETH_ALEN); ++ path->dev = ctx->dev; ++ ctx->dev = dev; ++ ++ return 0; ++} ++ + static const struct ppp_channel_ops pppoe_chan_ops = { + .start_xmit = pppoe_xmit, ++ .fill_forward_path = pppoe_fill_forward_path, + }; + + static int pppoe_recvmsg(struct socket *sock, struct msghdr *m, +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -831,6 +831,7 @@ enum net_device_path_type { + DEV_PATH_ETHERNET = 0, + DEV_PATH_VLAN, + DEV_PATH_BRIDGE, ++ DEV_PATH_PPPOE, + }; + + struct net_device_path { +@@ -840,6 +841,7 @@ struct net_device_path { + struct { + u16 id; + __be16 proto; ++ u8 h_dest[ETH_ALEN]; + } encap; + struct { + enum { +--- a/include/linux/ppp_channel.h ++++ b/include/linux/ppp_channel.h +@@ -28,6 +28,9 @@ struct ppp_channel_ops { + int (*start_xmit)(struct ppp_channel *, struct sk_buff *); + /* Handle an ioctl call that has come in via /dev/ppp. */ + int (*ioctl)(struct ppp_channel *, unsigned int, unsigned long); ++ int (*fill_forward_path)(struct net_device_path_ctx *, ++ struct net_device_path *, ++ const struct ppp_channel *); + }; + + struct ppp_channel { diff --git a/target/linux/generic/backport-5.15/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch b/target/linux/generic/backport-5.15/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch new file mode 100644 index 0000000000..1d3021a575 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-16-net-dsa-resolve-forwarding-path-for-dsa-slave-ports.patch @@ -0,0 +1,63 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:37 +0100 +Subject: [PATCH] net: dsa: resolve forwarding path for dsa slave ports + +Add .ndo_fill_forward_path for dsa slave port devices + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -832,6 +832,7 @@ enum net_device_path_type { + DEV_PATH_VLAN, + DEV_PATH_BRIDGE, + DEV_PATH_PPPOE, ++ DEV_PATH_DSA, + }; + + struct net_device_path { +@@ -852,6 +853,10 @@ struct net_device_path { + u16 vlan_id; + __be16 vlan_proto; + } bridge; ++ struct { ++ int port; ++ u16 proto; ++ } dsa; + }; + }; + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -1619,6 +1619,21 @@ static struct devlink_port *dsa_slave_ge + return dp->ds->devlink ? &dp->devlink_port : NULL; + } + ++static int dsa_slave_fill_forward_path(struct net_device_path_ctx *ctx, ++ struct net_device_path *path) ++{ ++ struct dsa_port *dp = dsa_slave_to_port(ctx->dev); ++ struct dsa_port *cpu_dp = dp->cpu_dp; ++ ++ path->dev = ctx->dev; ++ path->type = DEV_PATH_DSA; ++ path->dsa.proto = cpu_dp->tag_ops->proto; ++ path->dsa.port = dp->index; ++ ctx->dev = cpu_dp->master; ++ ++ return 0; ++} ++ + static const struct net_device_ops dsa_slave_netdev_ops = { + .ndo_open = dsa_slave_open, + .ndo_stop = dsa_slave_close, +@@ -1644,6 +1659,7 @@ static const struct net_device_ops dsa_s + .ndo_vlan_rx_kill_vid = dsa_slave_vlan_rx_kill_vid, + .ndo_get_devlink_port = dsa_slave_get_devlink_port, + .ndo_change_mtu = dsa_slave_change_mtu, ++ .ndo_fill_forward_path = dsa_slave_fill_forward_path, + }; + + static struct device_type dsa_type = { diff --git a/target/linux/generic/backport-5.15/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch b/target/linux/generic/backport-5.15/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch new file mode 100644 index 0000000000..6052f67faa --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-17-netfilter-flowtable-add-xmit-path-types.patch @@ -0,0 +1,147 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:38 +0100 +Subject: [PATCH] netfilter: flowtable: add xmit path types + +Add the xmit_type field that defines the two supported xmit paths in the +flowtable data plane, which are the neighbour and the xfrm xmit paths. +This patch prepares for new flowtable xmit path types to come. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -89,6 +89,11 @@ enum flow_offload_tuple_dir { + }; + #define FLOW_OFFLOAD_DIR_MAX IP_CT_DIR_MAX + ++enum flow_offload_xmit_type { ++ FLOW_OFFLOAD_XMIT_NEIGH = 0, ++ FLOW_OFFLOAD_XMIT_XFRM, ++}; ++ + struct flow_offload_tuple { + union { + struct in_addr src_v4; +@@ -111,7 +116,8 @@ struct flow_offload_tuple { + /* All members above are keys for lookups, see flow_offload_hash(). */ + struct { } __hash; + +- u8 dir; ++ u8 dir:6, ++ xmit_type:2; + + u16 mtu; + +@@ -157,7 +163,8 @@ static inline __s32 nf_flow_timeout_delt + + struct nf_flow_route { + struct { +- struct dst_entry *dst; ++ struct dst_entry *dst; ++ enum flow_offload_xmit_type xmit_type; + } tuple[FLOW_OFFLOAD_DIR_MAX]; + }; + +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -95,6 +95,7 @@ static int flow_offload_fill_route(struc + } + + flow_tuple->iifidx = other_dst->dev->ifindex; ++ flow_tuple->xmit_type = route->tuple[dir].xmit_type; + flow_tuple->dst_cache = dst; + + return 0; +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -235,8 +235,6 @@ nf_flow_offload_ip_hook(void *priv, stru + + dir = tuplehash->tuple.dir; + flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]); +- rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache; +- outdev = rt->dst.dev; + + if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu))) + return NF_ACCEPT; +@@ -265,13 +263,16 @@ nf_flow_offload_ip_hook(void *priv, stru + if (flow_table->flags & NF_FLOWTABLE_COUNTER) + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + +- if (unlikely(dst_xfrm(&rt->dst))) { ++ rt = (struct rtable *)tuplehash->tuple.dst_cache; ++ ++ if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { + memset(skb->cb, 0, sizeof(struct inet_skb_parm)); + IPCB(skb)->iif = skb->dev->ifindex; + IPCB(skb)->flags = IPSKB_FORWARDED; + return nf_flow_xmit_xfrm(skb, state, &rt->dst); + } + ++ outdev = rt->dst.dev; + skb->dev = outdev; + nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr); + skb_dst_set_noref(skb, &rt->dst); +@@ -456,8 +457,6 @@ nf_flow_offload_ipv6_hook(void *priv, st + + dir = tuplehash->tuple.dir; + flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]); +- rt = (struct rt6_info *)flow->tuplehash[dir].tuple.dst_cache; +- outdev = rt->dst.dev; + + if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu))) + return NF_ACCEPT; +@@ -485,13 +484,16 @@ nf_flow_offload_ipv6_hook(void *priv, st + if (flow_table->flags & NF_FLOWTABLE_COUNTER) + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + +- if (unlikely(dst_xfrm(&rt->dst))) { ++ rt = (struct rt6_info *)tuplehash->tuple.dst_cache; ++ ++ if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); + IP6CB(skb)->iif = skb->dev->ifindex; + IP6CB(skb)->flags = IP6SKB_FORWARDED; + return nf_flow_xmit_xfrm(skb, state, &rt->dst); + } + ++ outdev = rt->dst.dev; + skb->dev = outdev; + nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6); + skb_dst_set_noref(skb, &rt->dst); +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -19,6 +19,22 @@ struct nft_flow_offload { + struct nft_flowtable *flowtable; + }; + ++static enum flow_offload_xmit_type nft_xmit_type(struct dst_entry *dst) ++{ ++ if (dst_xfrm(dst)) ++ return FLOW_OFFLOAD_XMIT_XFRM; ++ ++ return FLOW_OFFLOAD_XMIT_NEIGH; ++} ++ ++static void nft_default_forward_path(struct nf_flow_route *route, ++ struct dst_entry *dst_cache, ++ enum ip_conntrack_dir dir) ++{ ++ route->tuple[dir].dst = dst_cache; ++ route->tuple[dir].xmit_type = nft_xmit_type(dst_cache); ++} ++ + static int nft_flow_route(const struct nft_pktinfo *pkt, + const struct nf_conn *ct, + struct nf_flow_route *route, +@@ -44,8 +60,8 @@ static int nft_flow_route(const struct n + if (!other_dst) + return -ENOENT; + +- route->tuple[dir].dst = this_dst; +- route->tuple[!dir].dst = other_dst; ++ nft_default_forward_path(route, this_dst, dir); ++ nft_default_forward_path(route, other_dst, !dir); + + return 0; + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch b/target/linux/generic/backport-5.15/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch new file mode 100644 index 0000000000..9541ce8867 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-18-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch @@ -0,0 +1,191 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:39 +0100 +Subject: [PATCH] netfilter: flowtable: use dev_fill_forward_path() to + obtain ingress device + +Obtain the ingress device in the tuple from the route in the reply +direction. Use dev_fill_forward_path() instead to get the real ingress +device for this flow. + +Fall back to use the ingress device that the IP forwarding route +provides if: + +- dev_fill_forward_path() finds no real ingress device. +- the ingress device that is obtained is not part of the flowtable + devices. +- this route has a xfrm policy. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -164,6 +164,9 @@ static inline __s32 nf_flow_timeout_delt + struct nf_flow_route { + struct { + struct dst_entry *dst; ++ struct { ++ u32 ifindex; ++ } in; + enum flow_offload_xmit_type xmit_type; + } tuple[FLOW_OFFLOAD_DIR_MAX]; + }; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -79,7 +79,6 @@ static int flow_offload_fill_route(struc + enum flow_offload_tuple_dir dir) + { + struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple; +- struct dst_entry *other_dst = route->tuple[!dir].dst; + struct dst_entry *dst = route->tuple[dir].dst; + + if (!dst_hold_safe(route->tuple[dir].dst)) +@@ -94,7 +93,7 @@ static int flow_offload_fill_route(struc + break; + } + +- flow_tuple->iifidx = other_dst->dev->ifindex; ++ flow_tuple->iifidx = route->tuple[dir].in.ifindex; + flow_tuple->xmit_type = route->tuple[dir].xmit_type; + flow_tuple->dst_cache = dst; + +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -31,14 +31,104 @@ static void nft_default_forward_path(str + struct dst_entry *dst_cache, + enum ip_conntrack_dir dir) + { ++ route->tuple[!dir].in.ifindex = dst_cache->dev->ifindex; + route->tuple[dir].dst = dst_cache; + route->tuple[dir].xmit_type = nft_xmit_type(dst_cache); + } + ++static int nft_dev_fill_forward_path(const struct nf_flow_route *route, ++ const struct dst_entry *dst_cache, ++ const struct nf_conn *ct, ++ enum ip_conntrack_dir dir, ++ struct net_device_path_stack *stack) ++{ ++ const void *daddr = &ct->tuplehash[!dir].tuple.src.u3; ++ struct net_device *dev = dst_cache->dev; ++ unsigned char ha[ETH_ALEN]; ++ struct neighbour *n; ++ u8 nud_state; ++ ++ n = dst_neigh_lookup(dst_cache, daddr); ++ if (!n) ++ return -1; ++ ++ read_lock_bh(&n->lock); ++ nud_state = n->nud_state; ++ ether_addr_copy(ha, n->ha); ++ read_unlock_bh(&n->lock); ++ neigh_release(n); ++ ++ if (!(nud_state & NUD_VALID)) ++ return -1; ++ ++ return dev_fill_forward_path(dev, ha, stack); ++} ++ ++struct nft_forward_info { ++ const struct net_device *indev; ++}; ++ ++static void nft_dev_path_info(const struct net_device_path_stack *stack, ++ struct nft_forward_info *info) ++{ ++ const struct net_device_path *path; ++ int i; ++ ++ for (i = 0; i < stack->num_paths; i++) { ++ path = &stack->path[i]; ++ switch (path->type) { ++ case DEV_PATH_ETHERNET: ++ info->indev = path->dev; ++ break; ++ case DEV_PATH_VLAN: ++ case DEV_PATH_BRIDGE: ++ default: ++ info->indev = NULL; ++ break; ++ } ++ } ++} ++ ++static bool nft_flowtable_find_dev(const struct net_device *dev, ++ struct nft_flowtable *ft) ++{ ++ struct nft_hook *hook; ++ bool found = false; ++ ++ list_for_each_entry_rcu(hook, &ft->hook_list, list) { ++ if (hook->ops.dev != dev) ++ continue; ++ ++ found = true; ++ break; ++ } ++ ++ return found; ++} ++ ++static void nft_dev_forward_path(struct nf_flow_route *route, ++ const struct nf_conn *ct, ++ enum ip_conntrack_dir dir, ++ struct nft_flowtable *ft) ++{ ++ const struct dst_entry *dst = route->tuple[dir].dst; ++ struct net_device_path_stack stack; ++ struct nft_forward_info info = {}; ++ ++ if (nft_dev_fill_forward_path(route, dst, ct, dir, &stack) >= 0) ++ nft_dev_path_info(&stack, &info); ++ ++ if (!info.indev || !nft_flowtable_find_dev(info.indev, ft)) ++ return; ++ ++ route->tuple[!dir].in.ifindex = info.indev->ifindex; ++} ++ + static int nft_flow_route(const struct nft_pktinfo *pkt, + const struct nf_conn *ct, + struct nf_flow_route *route, +- enum ip_conntrack_dir dir) ++ enum ip_conntrack_dir dir, ++ struct nft_flowtable *ft) + { + struct dst_entry *this_dst = skb_dst(pkt->skb); + struct dst_entry *other_dst = NULL; +@@ -63,6 +153,12 @@ static int nft_flow_route(const struct n + nft_default_forward_path(route, this_dst, dir); + nft_default_forward_path(route, other_dst, !dir); + ++ if (route->tuple[dir].xmit_type == FLOW_OFFLOAD_XMIT_NEIGH && ++ route->tuple[!dir].xmit_type == FLOW_OFFLOAD_XMIT_NEIGH) { ++ nft_dev_forward_path(route, ct, dir, ft); ++ nft_dev_forward_path(route, ct, !dir, ft); ++ } ++ + return 0; + } + +@@ -90,8 +186,8 @@ static void nft_flow_offload_eval(const + struct nft_flow_offload *priv = nft_expr_priv(expr); + struct nf_flowtable *flowtable = &priv->flowtable->data; + struct tcphdr _tcph, *tcph = NULL; ++ struct nf_flow_route route = {}; + enum ip_conntrack_info ctinfo; +- struct nf_flow_route route; + struct flow_offload *flow; + enum ip_conntrack_dir dir; + struct nf_conn *ct; +@@ -128,7 +224,7 @@ static void nft_flow_offload_eval(const + goto out; + + dir = CTINFO2DIR(ctinfo); +- if (nft_flow_route(pkt, ct, &route, dir) < 0) ++ if (nft_flow_route(pkt, ct, &route, dir, priv->flowtable) < 0) + goto err_flow_route; + + flow = flow_offload_alloc(ct); diff --git a/target/linux/generic/backport-5.15/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch b/target/linux/generic/backport-5.15/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch new file mode 100644 index 0000000000..457e218d9b --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-19-netfilter-flowtable-use-dev_fill_forward_path-to-obt.patch @@ -0,0 +1,374 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:40 +0100 +Subject: [PATCH] netfilter: flowtable: use dev_fill_forward_path() to + obtain egress device + +The egress device in the tuple is obtained from route. Use +dev_fill_forward_path() instead to provide the real egress device for +this flow whenever this is available. + +The new FLOW_OFFLOAD_XMIT_DIRECT type uses dev_queue_xmit() to transmit +ethernet frames. Cache the source and destination hardware address to +use dev_queue_xmit() to transfer packets. + +The FLOW_OFFLOAD_XMIT_DIRECT replaces FLOW_OFFLOAD_XMIT_NEIGH if +dev_fill_forward_path() finds a direct transmit path. + +In case of topology updates, if peer is moved to different bridge port, +the connection will time out, reconnect will result in a new entry with +the correct path. Snooping fdb updates would allow for cleaning up stale +flowtable entries. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -92,6 +92,7 @@ enum flow_offload_tuple_dir { + enum flow_offload_xmit_type { + FLOW_OFFLOAD_XMIT_NEIGH = 0, + FLOW_OFFLOAD_XMIT_XFRM, ++ FLOW_OFFLOAD_XMIT_DIRECT, + }; + + struct flow_offload_tuple { +@@ -120,8 +121,14 @@ struct flow_offload_tuple { + xmit_type:2; + + u16 mtu; +- +- struct dst_entry *dst_cache; ++ union { ++ struct dst_entry *dst_cache; ++ struct { ++ u32 ifidx; ++ u8 h_source[ETH_ALEN]; ++ u8 h_dest[ETH_ALEN]; ++ } out; ++ }; + }; + + struct flow_offload_tuple_rhash { +@@ -167,6 +174,11 @@ struct nf_flow_route { + struct { + u32 ifindex; + } in; ++ struct { ++ u32 ifindex; ++ u8 h_source[ETH_ALEN]; ++ u8 h_dest[ETH_ALEN]; ++ } out; + enum flow_offload_xmit_type xmit_type; + } tuple[FLOW_OFFLOAD_DIR_MAX]; + }; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -81,9 +81,6 @@ static int flow_offload_fill_route(struc + struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple; + struct dst_entry *dst = route->tuple[dir].dst; + +- if (!dst_hold_safe(route->tuple[dir].dst)) +- return -1; +- + switch (flow_tuple->l3proto) { + case NFPROTO_IPV4: + flow_tuple->mtu = ip_dst_mtu_maybe_forward(dst, true); +@@ -94,12 +91,36 @@ static int flow_offload_fill_route(struc + } + + flow_tuple->iifidx = route->tuple[dir].in.ifindex; ++ ++ switch (route->tuple[dir].xmit_type) { ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ memcpy(flow_tuple->out.h_dest, route->tuple[dir].out.h_dest, ++ ETH_ALEN); ++ memcpy(flow_tuple->out.h_source, route->tuple[dir].out.h_source, ++ ETH_ALEN); ++ flow_tuple->out.ifidx = route->tuple[dir].out.ifindex; ++ break; ++ case FLOW_OFFLOAD_XMIT_XFRM: ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ if (!dst_hold_safe(route->tuple[dir].dst)) ++ return -1; ++ ++ flow_tuple->dst_cache = dst; ++ break; ++ } + flow_tuple->xmit_type = route->tuple[dir].xmit_type; +- flow_tuple->dst_cache = dst; + + return 0; + } + ++static void nft_flow_dst_release(struct flow_offload *flow, ++ enum flow_offload_tuple_dir dir) ++{ ++ if (flow->tuplehash[dir].tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || ++ flow->tuplehash[dir].tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) ++ dst_release(flow->tuplehash[dir].tuple.dst_cache); ++} ++ + int flow_offload_route_init(struct flow_offload *flow, + const struct nf_flow_route *route) + { +@@ -118,7 +139,7 @@ int flow_offload_route_init(struct flow_ + return 0; + + err_route_reply: +- dst_release(route->tuple[FLOW_OFFLOAD_DIR_ORIGINAL].dst); ++ nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL); + + return err; + } +@@ -169,8 +190,8 @@ static void flow_offload_fixup_ct(struct + + static void flow_offload_route_release(struct flow_offload *flow) + { +- dst_release(flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.dst_cache); +- dst_release(flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple.dst_cache); ++ nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL); ++ nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_REPLY); + } + + void flow_offload_free(struct flow_offload *flow) +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -207,6 +207,24 @@ static unsigned int nf_flow_xmit_xfrm(st + return NF_STOLEN; + } + ++static unsigned int nf_flow_queue_xmit(struct net *net, struct sk_buff *skb, ++ const struct flow_offload_tuple_rhash *tuplehash, ++ unsigned short type) ++{ ++ struct net_device *outdev; ++ ++ outdev = dev_get_by_index_rcu(net, tuplehash->tuple.out.ifidx); ++ if (!outdev) ++ return NF_DROP; ++ ++ skb->dev = outdev; ++ dev_hard_header(skb, skb->dev, type, tuplehash->tuple.out.h_dest, ++ tuplehash->tuple.out.h_source, skb->len); ++ dev_queue_xmit(skb); ++ ++ return NF_STOLEN; ++} ++ + unsigned int + nf_flow_offload_ip_hook(void *priv, struct sk_buff *skb, + const struct nf_hook_state *state) +@@ -222,6 +240,7 @@ nf_flow_offload_ip_hook(void *priv, stru + struct iphdr *iph; + __be32 nexthop; + u32 hdrsize; ++ int ret; + + if (skb->protocol != htons(ETH_P_IP)) + return NF_ACCEPT; +@@ -244,9 +263,13 @@ nf_flow_offload_ip_hook(void *priv, stru + if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + +- if (!dst_check(&rt->dst, 0)) { +- flow_offload_teardown(flow); +- return NF_ACCEPT; ++ if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || ++ tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) { ++ rt = (struct rtable *)tuplehash->tuple.dst_cache; ++ if (!dst_check(&rt->dst, 0)) { ++ flow_offload_teardown(flow); ++ return NF_ACCEPT; ++ } + } + + if (skb_try_make_writable(skb, thoff + hdrsize)) +@@ -263,8 +286,6 @@ nf_flow_offload_ip_hook(void *priv, stru + if (flow_table->flags & NF_FLOWTABLE_COUNTER) + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + +- rt = (struct rtable *)tuplehash->tuple.dst_cache; +- + if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { + memset(skb->cb, 0, sizeof(struct inet_skb_parm)); + IPCB(skb)->iif = skb->dev->ifindex; +@@ -272,13 +293,23 @@ nf_flow_offload_ip_hook(void *priv, stru + return nf_flow_xmit_xfrm(skb, state, &rt->dst); + } + +- outdev = rt->dst.dev; +- skb->dev = outdev; +- nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr); +- skb_dst_set_noref(skb, &rt->dst); +- neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb); ++ switch (tuplehash->tuple.xmit_type) { ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ outdev = rt->dst.dev; ++ skb->dev = outdev; ++ nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr); ++ skb_dst_set_noref(skb, &rt->dst); ++ neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb); ++ ret = NF_STOLEN; ++ break; ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ ret = nf_flow_queue_xmit(state->net, skb, tuplehash, ETH_P_IP); ++ if (ret == NF_DROP) ++ flow_offload_teardown(flow); ++ break; ++ } + +- return NF_STOLEN; ++ return ret; + } + EXPORT_SYMBOL_GPL(nf_flow_offload_ip_hook); + +@@ -444,6 +475,7 @@ nf_flow_offload_ipv6_hook(void *priv, st + struct ipv6hdr *ip6h; + struct rt6_info *rt; + u32 hdrsize; ++ int ret; + + if (skb->protocol != htons(ETH_P_IPV6)) + return NF_ACCEPT; +@@ -465,9 +497,13 @@ nf_flow_offload_ipv6_hook(void *priv, st + sizeof(*ip6h))) + return NF_ACCEPT; + +- if (!dst_check(&rt->dst, 0)) { +- flow_offload_teardown(flow); +- return NF_ACCEPT; ++ if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || ++ tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) { ++ rt = (struct rt6_info *)tuplehash->tuple.dst_cache; ++ if (!dst_check(&rt->dst, 0)) { ++ flow_offload_teardown(flow); ++ return NF_ACCEPT; ++ } + } + + if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize)) +@@ -484,8 +520,6 @@ nf_flow_offload_ipv6_hook(void *priv, st + if (flow_table->flags & NF_FLOWTABLE_COUNTER) + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + +- rt = (struct rt6_info *)tuplehash->tuple.dst_cache; +- + if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); + IP6CB(skb)->iif = skb->dev->ifindex; +@@ -493,12 +527,22 @@ nf_flow_offload_ipv6_hook(void *priv, st + return nf_flow_xmit_xfrm(skb, state, &rt->dst); + } + +- outdev = rt->dst.dev; +- skb->dev = outdev; +- nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6); +- skb_dst_set_noref(skb, &rt->dst); +- neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb); ++ switch (tuplehash->tuple.xmit_type) { ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ outdev = rt->dst.dev; ++ skb->dev = outdev; ++ nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6); ++ skb_dst_set_noref(skb, &rt->dst); ++ neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb); ++ ret = NF_STOLEN; ++ break; ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ ret = nf_flow_queue_xmit(state->net, skb, tuplehash, ETH_P_IPV6); ++ if (ret == NF_DROP) ++ flow_offload_teardown(flow); ++ break; ++ } + +- return NF_STOLEN; ++ return ret; + } + EXPORT_SYMBOL_GPL(nf_flow_offload_ipv6_hook); +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -39,12 +39,11 @@ static void nft_default_forward_path(str + static int nft_dev_fill_forward_path(const struct nf_flow_route *route, + const struct dst_entry *dst_cache, + const struct nf_conn *ct, +- enum ip_conntrack_dir dir, ++ enum ip_conntrack_dir dir, u8 *ha, + struct net_device_path_stack *stack) + { + const void *daddr = &ct->tuplehash[!dir].tuple.src.u3; + struct net_device *dev = dst_cache->dev; +- unsigned char ha[ETH_ALEN]; + struct neighbour *n; + u8 nud_state; + +@@ -66,27 +65,43 @@ static int nft_dev_fill_forward_path(con + + struct nft_forward_info { + const struct net_device *indev; ++ const struct net_device *outdev; ++ u8 h_source[ETH_ALEN]; ++ u8 h_dest[ETH_ALEN]; ++ enum flow_offload_xmit_type xmit_type; + }; + + static void nft_dev_path_info(const struct net_device_path_stack *stack, +- struct nft_forward_info *info) ++ struct nft_forward_info *info, ++ unsigned char *ha) + { + const struct net_device_path *path; + int i; + ++ memcpy(info->h_dest, ha, ETH_ALEN); ++ + for (i = 0; i < stack->num_paths; i++) { + path = &stack->path[i]; + switch (path->type) { + case DEV_PATH_ETHERNET: + info->indev = path->dev; ++ if (is_zero_ether_addr(info->h_source)) ++ memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); + break; +- case DEV_PATH_VLAN: + case DEV_PATH_BRIDGE: ++ if (is_zero_ether_addr(info->h_source)) ++ memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); ++ ++ info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT; ++ break; ++ case DEV_PATH_VLAN: + default: + info->indev = NULL; + break; + } + } ++ if (!info->outdev) ++ info->outdev = info->indev; + } + + static bool nft_flowtable_find_dev(const struct net_device *dev, +@@ -114,14 +129,22 @@ static void nft_dev_forward_path(struct + const struct dst_entry *dst = route->tuple[dir].dst; + struct net_device_path_stack stack; + struct nft_forward_info info = {}; ++ unsigned char ha[ETH_ALEN]; + +- if (nft_dev_fill_forward_path(route, dst, ct, dir, &stack) >= 0) +- nft_dev_path_info(&stack, &info); ++ if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0) ++ nft_dev_path_info(&stack, &info, ha); + + if (!info.indev || !nft_flowtable_find_dev(info.indev, ft)) + return; + + route->tuple[!dir].in.ifindex = info.indev->ifindex; ++ ++ if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) { ++ memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN); ++ memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN); ++ route->tuple[dir].out.ifindex = info.outdev->ifindex; ++ route->tuple[dir].xmit_type = info.xmit_type; ++ } + } + + static int nft_flow_route(const struct nft_pktinfo *pkt, diff --git a/target/linux/generic/backport-5.15/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch b/target/linux/generic/backport-5.15/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch new file mode 100644 index 0000000000..86a1129880 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-20-netfilter-flowtable-add-vlan-support.patch @@ -0,0 +1,410 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:41 +0100 +Subject: [PATCH] netfilter: flowtable: add vlan support + +Add the vlan id and protocol to the flow tuple to uniquely identify +flows from the receive path. For the transmit path, dev_hard_header() on +the vlan device push the headers. This patch includes support for two +vlan headers (QinQ) from the ingress path. + +Add a generic encap field to the flowtable entry which stores the +protocol and the tag id. This allows to reuse these fields in the PPPoE +support coming in a later patch. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -95,6 +95,8 @@ enum flow_offload_xmit_type { + FLOW_OFFLOAD_XMIT_DIRECT, + }; + ++#define NF_FLOW_TABLE_ENCAP_MAX 2 ++ + struct flow_offload_tuple { + union { + struct in_addr src_v4; +@@ -113,13 +115,17 @@ struct flow_offload_tuple { + + u8 l3proto; + u8 l4proto; ++ struct { ++ u16 id; ++ __be16 proto; ++ } encap[NF_FLOW_TABLE_ENCAP_MAX]; + + /* All members above are keys for lookups, see flow_offload_hash(). */ + struct { } __hash; + +- u8 dir:6, +- xmit_type:2; +- ++ u8 dir:4, ++ xmit_type:2, ++ encap_num:2; + u16 mtu; + union { + struct dst_entry *dst_cache; +@@ -173,6 +179,11 @@ struct nf_flow_route { + struct dst_entry *dst; + struct { + u32 ifindex; ++ struct { ++ u16 id; ++ __be16 proto; ++ } encap[NF_FLOW_TABLE_ENCAP_MAX]; ++ u8 num_encaps; + } in; + struct { + u32 ifindex; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -80,6 +80,7 @@ static int flow_offload_fill_route(struc + { + struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple; + struct dst_entry *dst = route->tuple[dir].dst; ++ int i, j = 0; + + switch (flow_tuple->l3proto) { + case NFPROTO_IPV4: +@@ -91,6 +92,12 @@ static int flow_offload_fill_route(struc + } + + flow_tuple->iifidx = route->tuple[dir].in.ifindex; ++ for (i = route->tuple[dir].in.num_encaps - 1; i >= 0; i--) { ++ flow_tuple->encap[j].id = route->tuple[dir].in.encap[i].id; ++ flow_tuple->encap[j].proto = route->tuple[dir].in.encap[i].proto; ++ j++; ++ } ++ flow_tuple->encap_num = route->tuple[dir].in.num_encaps; + + switch (route->tuple[dir].xmit_type) { + case FLOW_OFFLOAD_XMIT_DIRECT: +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -136,23 +136,44 @@ static bool ip_has_options(unsigned int + return thoff != sizeof(struct iphdr); + } + ++static void nf_flow_tuple_encap(struct sk_buff *skb, ++ struct flow_offload_tuple *tuple) ++{ ++ int i = 0; ++ ++ if (skb_vlan_tag_present(skb)) { ++ tuple->encap[i].id = skb_vlan_tag_get(skb); ++ tuple->encap[i].proto = skb->vlan_proto; ++ i++; ++ } ++ if (skb->protocol == htons(ETH_P_8021Q)) { ++ struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb); ++ ++ tuple->encap[i].id = ntohs(veth->h_vlan_TCI); ++ tuple->encap[i].proto = skb->protocol; ++ } ++} ++ + static int nf_flow_tuple_ip(struct sk_buff *skb, const struct net_device *dev, +- struct flow_offload_tuple *tuple, u32 *hdrsize) ++ struct flow_offload_tuple *tuple, u32 *hdrsize, ++ u32 offset) + { + struct flow_ports *ports; + unsigned int thoff; + struct iphdr *iph; + +- if (!pskb_may_pull(skb, sizeof(*iph))) ++ if (!pskb_may_pull(skb, sizeof(*iph) + offset)) + return -1; + +- iph = ip_hdr(skb); +- thoff = iph->ihl * 4; ++ iph = (struct iphdr *)(skb_network_header(skb) + offset); ++ thoff = (iph->ihl * 4); + + if (ip_is_fragment(iph) || + unlikely(ip_has_options(thoff))) + return -1; + ++ thoff += offset; ++ + switch (iph->protocol) { + case IPPROTO_TCP: + *hdrsize = sizeof(struct tcphdr); +@@ -167,11 +188,10 @@ static int nf_flow_tuple_ip(struct sk_bu + if (iph->ttl <= 1) + return -1; + +- thoff = iph->ihl * 4; + if (!pskb_may_pull(skb, thoff + *hdrsize)) + return -1; + +- iph = ip_hdr(skb); ++ iph = (struct iphdr *)(skb_network_header(skb) + offset); + ports = (struct flow_ports *)(skb_network_header(skb) + thoff); + + tuple->src_v4.s_addr = iph->saddr; +@@ -181,6 +201,7 @@ static int nf_flow_tuple_ip(struct sk_bu + tuple->l3proto = AF_INET; + tuple->l4proto = iph->protocol; + tuple->iifidx = dev->ifindex; ++ nf_flow_tuple_encap(skb, tuple); + + return 0; + } +@@ -207,6 +228,43 @@ static unsigned int nf_flow_xmit_xfrm(st + return NF_STOLEN; + } + ++static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto, ++ u32 *offset) ++{ ++ if (skb->protocol == htons(ETH_P_8021Q)) { ++ struct vlan_ethhdr *veth; ++ ++ veth = (struct vlan_ethhdr *)skb_mac_header(skb); ++ if (veth->h_vlan_encapsulated_proto == proto) { ++ *offset += VLAN_HLEN; ++ return true; ++ } ++ } ++ ++ return false; ++} ++ ++static void nf_flow_encap_pop(struct sk_buff *skb, ++ struct flow_offload_tuple_rhash *tuplehash) ++{ ++ struct vlan_hdr *vlan_hdr; ++ int i; ++ ++ for (i = 0; i < tuplehash->tuple.encap_num; i++) { ++ if (skb_vlan_tag_present(skb)) { ++ __vlan_hwaccel_clear_tag(skb); ++ continue; ++ } ++ if (skb->protocol == htons(ETH_P_8021Q)) { ++ vlan_hdr = (struct vlan_hdr *)skb->data; ++ __skb_pull(skb, VLAN_HLEN); ++ vlan_set_encap_proto(skb, vlan_hdr); ++ skb_reset_network_header(skb); ++ break; ++ } ++ } ++} ++ + static unsigned int nf_flow_queue_xmit(struct net *net, struct sk_buff *skb, + const struct flow_offload_tuple_rhash *tuplehash, + unsigned short type) +@@ -235,17 +293,18 @@ nf_flow_offload_ip_hook(void *priv, stru + enum flow_offload_tuple_dir dir; + struct flow_offload *flow; + struct net_device *outdev; ++ u32 hdrsize, offset = 0; ++ unsigned int thoff, mtu; + struct rtable *rt; +- unsigned int thoff; + struct iphdr *iph; + __be32 nexthop; +- u32 hdrsize; + int ret; + +- if (skb->protocol != htons(ETH_P_IP)) ++ if (skb->protocol != htons(ETH_P_IP) && ++ !nf_flow_skb_encap_protocol(skb, htons(ETH_P_IP), &offset)) + return NF_ACCEPT; + +- if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize) < 0) ++ if (nf_flow_tuple_ip(skb, state->in, &tuple, &hdrsize, offset) < 0) + return NF_ACCEPT; + + tuplehash = flow_offload_lookup(flow_table, &tuple); +@@ -255,11 +314,12 @@ nf_flow_offload_ip_hook(void *priv, stru + dir = tuplehash->tuple.dir; + flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]); + +- if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu))) ++ mtu = flow->tuplehash[dir].tuple.mtu + offset; ++ if (unlikely(nf_flow_exceeds_mtu(skb, mtu))) + return NF_ACCEPT; + +- iph = ip_hdr(skb); +- thoff = iph->ihl * 4; ++ iph = (struct iphdr *)(skb_network_header(skb) + offset); ++ thoff = (iph->ihl * 4) + offset; + if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + +@@ -277,6 +337,9 @@ nf_flow_offload_ip_hook(void *priv, stru + + flow_offload_refresh(flow_table, flow); + ++ nf_flow_encap_pop(skb, tuplehash); ++ thoff -= offset; ++ + iph = ip_hdr(skb); + nf_flow_nat_ip(flow, skb, thoff, dir, iph); + +@@ -418,16 +481,18 @@ static void nf_flow_nat_ipv6(const struc + } + + static int nf_flow_tuple_ipv6(struct sk_buff *skb, const struct net_device *dev, +- struct flow_offload_tuple *tuple, u32 *hdrsize) ++ struct flow_offload_tuple *tuple, u32 *hdrsize, ++ u32 offset) + { + struct flow_ports *ports; + struct ipv6hdr *ip6h; + unsigned int thoff; + +- if (!pskb_may_pull(skb, sizeof(*ip6h))) ++ thoff = sizeof(*ip6h) + offset; ++ if (!pskb_may_pull(skb, thoff)) + return -1; + +- ip6h = ipv6_hdr(skb); ++ ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset); + + switch (ip6h->nexthdr) { + case IPPROTO_TCP: +@@ -443,11 +508,10 @@ static int nf_flow_tuple_ipv6(struct sk_ + if (ip6h->hop_limit <= 1) + return -1; + +- thoff = sizeof(*ip6h); + if (!pskb_may_pull(skb, thoff + *hdrsize)) + return -1; + +- ip6h = ipv6_hdr(skb); ++ ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset); + ports = (struct flow_ports *)(skb_network_header(skb) + thoff); + + tuple->src_v6 = ip6h->saddr; +@@ -457,6 +521,7 @@ static int nf_flow_tuple_ipv6(struct sk_ + tuple->l3proto = AF_INET6; + tuple->l4proto = ip6h->nexthdr; + tuple->iifidx = dev->ifindex; ++ nf_flow_tuple_encap(skb, tuple); + + return 0; + } +@@ -472,15 +537,17 @@ nf_flow_offload_ipv6_hook(void *priv, st + const struct in6_addr *nexthop; + struct flow_offload *flow; + struct net_device *outdev; ++ unsigned int thoff, mtu; ++ u32 hdrsize, offset = 0; + struct ipv6hdr *ip6h; + struct rt6_info *rt; +- u32 hdrsize; + int ret; + +- if (skb->protocol != htons(ETH_P_IPV6)) ++ if (skb->protocol != htons(ETH_P_IPV6) && ++ !nf_flow_skb_encap_protocol(skb, htons(ETH_P_IPV6), &offset)) + return NF_ACCEPT; + +- if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize) < 0) ++ if (nf_flow_tuple_ipv6(skb, state->in, &tuple, &hdrsize, offset) < 0) + return NF_ACCEPT; + + tuplehash = flow_offload_lookup(flow_table, &tuple); +@@ -490,11 +557,13 @@ nf_flow_offload_ipv6_hook(void *priv, st + dir = tuplehash->tuple.dir; + flow = container_of(tuplehash, struct flow_offload, tuplehash[dir]); + +- if (unlikely(nf_flow_exceeds_mtu(skb, flow->tuplehash[dir].tuple.mtu))) ++ mtu = flow->tuplehash[dir].tuple.mtu + offset; ++ if (unlikely(nf_flow_exceeds_mtu(skb, mtu))) + return NF_ACCEPT; + +- if (nf_flow_state_check(flow, ipv6_hdr(skb)->nexthdr, skb, +- sizeof(*ip6h))) ++ ip6h = (struct ipv6hdr *)(skb_network_header(skb) + offset); ++ thoff = sizeof(*ip6h) + offset; ++ if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff)) + return NF_ACCEPT; + + if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || +@@ -506,11 +575,13 @@ nf_flow_offload_ipv6_hook(void *priv, st + } + } + +- if (skb_try_make_writable(skb, sizeof(*ip6h) + hdrsize)) ++ if (skb_try_make_writable(skb, thoff + hdrsize)) + return NF_DROP; + + flow_offload_refresh(flow_table, flow); + ++ nf_flow_encap_pop(skb, tuplehash); ++ + ip6h = ipv6_hdr(skb); + nf_flow_nat_ipv6(flow, skb, dir, ip6h); + +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -66,6 +66,11 @@ static int nft_dev_fill_forward_path(con + struct nft_forward_info { + const struct net_device *indev; + const struct net_device *outdev; ++ struct id { ++ __u16 id; ++ __be16 proto; ++ } encap[NF_FLOW_TABLE_ENCAP_MAX]; ++ u8 num_encaps; + u8 h_source[ETH_ALEN]; + u8 h_dest[ETH_ALEN]; + enum flow_offload_xmit_type xmit_type; +@@ -84,9 +89,23 @@ static void nft_dev_path_info(const stru + path = &stack->path[i]; + switch (path->type) { + case DEV_PATH_ETHERNET: ++ case DEV_PATH_VLAN: + info->indev = path->dev; + if (is_zero_ether_addr(info->h_source)) + memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); ++ ++ if (path->type == DEV_PATH_ETHERNET) ++ break; ++ ++ /* DEV_PATH_VLAN */ ++ if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) { ++ info->indev = NULL; ++ break; ++ } ++ info->outdev = path->dev; ++ info->encap[info->num_encaps].id = path->encap.id; ++ info->encap[info->num_encaps].proto = path->encap.proto; ++ info->num_encaps++; + break; + case DEV_PATH_BRIDGE: + if (is_zero_ether_addr(info->h_source)) +@@ -94,7 +113,6 @@ static void nft_dev_path_info(const stru + + info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT; + break; +- case DEV_PATH_VLAN: + default: + info->indev = NULL; + break; +@@ -130,6 +148,7 @@ static void nft_dev_forward_path(struct + struct net_device_path_stack stack; + struct nft_forward_info info = {}; + unsigned char ha[ETH_ALEN]; ++ int i; + + if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0) + nft_dev_path_info(&stack, &info, ha); +@@ -138,6 +157,11 @@ static void nft_dev_forward_path(struct + return; + + route->tuple[!dir].in.ifindex = info.indev->ifindex; ++ for (i = 0; i < info.num_encaps; i++) { ++ route->tuple[!dir].in.encap[i].id = info.encap[i].id; ++ route->tuple[!dir].in.encap[i].proto = info.encap[i].proto; ++ } ++ route->tuple[!dir].in.num_encaps = info.num_encaps; + + if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) { + memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN); diff --git a/target/linux/generic/backport-5.15/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch b/target/linux/generic/backport-5.15/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch new file mode 100644 index 0000000000..cb3ef99029 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-21-netfilter-flowtable-add-bridge-vlan-filtering-suppor.patch @@ -0,0 +1,30 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:42 +0100 +Subject: [PATCH] netfilter: flowtable: add bridge vlan filtering support + +Add the vlan tag based when PVID is set on. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -111,6 +111,18 @@ static void nft_dev_path_info(const stru + if (is_zero_ether_addr(info->h_source)) + memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); + ++ switch (path->bridge.vlan_mode) { ++ case DEV_PATH_BR_VLAN_TAG: ++ info->encap[info->num_encaps].id = path->bridge.vlan_id; ++ info->encap[info->num_encaps].proto = path->bridge.vlan_proto; ++ info->num_encaps++; ++ break; ++ case DEV_PATH_BR_VLAN_UNTAG: ++ info->num_encaps--; ++ break; ++ case DEV_PATH_BR_VLAN_KEEP: ++ break; ++ } + info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT; + break; + default: diff --git a/target/linux/generic/backport-5.15/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch b/target/linux/generic/backport-5.15/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch new file mode 100644 index 0000000000..d5789cbad2 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-22-netfilter-flowtable-add-pppoe-support.patch @@ -0,0 +1,145 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:43 +0100 +Subject: [PATCH] netfilter: flowtable: add pppoe support + +Add the PPPoE protocol and session id to the flow tuple using the encap +fields to uniquely identify flows from the receive path. For the +transmit path, dev_hard_header() on the vlan device push the headers. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -7,6 +7,9 @@ + #include + #include + #include ++#include ++#include ++#include + #include + #include + #include +@@ -139,6 +142,8 @@ static bool ip_has_options(unsigned int + static void nf_flow_tuple_encap(struct sk_buff *skb, + struct flow_offload_tuple *tuple) + { ++ struct vlan_ethhdr *veth; ++ struct pppoe_hdr *phdr; + int i = 0; + + if (skb_vlan_tag_present(skb)) { +@@ -146,11 +151,17 @@ static void nf_flow_tuple_encap(struct s + tuple->encap[i].proto = skb->vlan_proto; + i++; + } +- if (skb->protocol == htons(ETH_P_8021Q)) { +- struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb); +- ++ switch (skb->protocol) { ++ case htons(ETH_P_8021Q): ++ veth = (struct vlan_ethhdr *)skb_mac_header(skb); + tuple->encap[i].id = ntohs(veth->h_vlan_TCI); + tuple->encap[i].proto = skb->protocol; ++ break; ++ case htons(ETH_P_PPP_SES): ++ phdr = (struct pppoe_hdr *)skb_mac_header(skb); ++ tuple->encap[i].id = ntohs(phdr->sid); ++ tuple->encap[i].proto = skb->protocol; ++ break; + } + } + +@@ -228,17 +239,41 @@ static unsigned int nf_flow_xmit_xfrm(st + return NF_STOLEN; + } + ++static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb) ++{ ++ __be16 proto; ++ ++ proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN + ++ sizeof(struct pppoe_hdr))); ++ switch (proto) { ++ case htons(PPP_IP): ++ return htons(ETH_P_IP); ++ case htons(PPP_IPV6): ++ return htons(ETH_P_IPV6); ++ } ++ ++ return 0; ++} ++ + static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto, + u32 *offset) + { +- if (skb->protocol == htons(ETH_P_8021Q)) { +- struct vlan_ethhdr *veth; ++ struct vlan_ethhdr *veth; + ++ switch (skb->protocol) { ++ case htons(ETH_P_8021Q): + veth = (struct vlan_ethhdr *)skb_mac_header(skb); + if (veth->h_vlan_encapsulated_proto == proto) { + *offset += VLAN_HLEN; + return true; + } ++ break; ++ case htons(ETH_P_PPP_SES): ++ if (nf_flow_pppoe_proto(skb) == proto) { ++ *offset += PPPOE_SES_HLEN; ++ return true; ++ } ++ break; + } + + return false; +@@ -255,12 +290,18 @@ static void nf_flow_encap_pop(struct sk_ + __vlan_hwaccel_clear_tag(skb); + continue; + } +- if (skb->protocol == htons(ETH_P_8021Q)) { ++ switch (skb->protocol) { ++ case htons(ETH_P_8021Q): + vlan_hdr = (struct vlan_hdr *)skb->data; + __skb_pull(skb, VLAN_HLEN); + vlan_set_encap_proto(skb, vlan_hdr); + skb_reset_network_header(skb); + break; ++ case htons(ETH_P_PPP_SES): ++ skb->protocol = nf_flow_pppoe_proto(skb); ++ skb_pull(skb, PPPOE_SES_HLEN); ++ skb_reset_network_header(skb); ++ break; + } + } + } +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -90,6 +90,7 @@ static void nft_dev_path_info(const stru + switch (path->type) { + case DEV_PATH_ETHERNET: + case DEV_PATH_VLAN: ++ case DEV_PATH_PPPOE: + info->indev = path->dev; + if (is_zero_ether_addr(info->h_source)) + memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); +@@ -97,7 +98,7 @@ static void nft_dev_path_info(const stru + if (path->type == DEV_PATH_ETHERNET) + break; + +- /* DEV_PATH_VLAN */ ++ /* DEV_PATH_VLAN and DEV_PATH_PPPOE */ + if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) { + info->indev = NULL; + break; +@@ -106,6 +107,8 @@ static void nft_dev_path_info(const stru + info->encap[info->num_encaps].id = path->encap.id; + info->encap[info->num_encaps].proto = path->encap.proto; + info->num_encaps++; ++ if (path->type == DEV_PATH_PPPOE) ++ memcpy(info->h_dest, path->encap.h_dest, ETH_ALEN); + break; + case DEV_PATH_BRIDGE: + if (is_zero_ether_addr(info->h_source)) diff --git a/target/linux/generic/backport-5.15/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch b/target/linux/generic/backport-5.15/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch new file mode 100644 index 0000000000..b4931830d3 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-23-netfilter-flowtable-add-dsa-support.patch @@ -0,0 +1,32 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:44 +0100 +Subject: [PATCH] netfilter: flowtable: add dsa support + +Replace the master ethernet device by the dsa slave port. Packets coming +in from the software ingress path use the dsa slave port as input +device. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -89,6 +89,7 @@ static void nft_dev_path_info(const stru + path = &stack->path[i]; + switch (path->type) { + case DEV_PATH_ETHERNET: ++ case DEV_PATH_DSA: + case DEV_PATH_VLAN: + case DEV_PATH_PPPOE: + info->indev = path->dev; +@@ -97,6 +98,10 @@ static void nft_dev_path_info(const stru + + if (path->type == DEV_PATH_ETHERNET) + break; ++ if (path->type == DEV_PATH_DSA) { ++ i = stack->num_paths; ++ break; ++ } + + /* DEV_PATH_VLAN and DEV_PATH_PPPOE */ + if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) { diff --git a/target/linux/generic/backport-5.15/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch b/target/linux/generic/backport-5.15/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch new file mode 100644 index 0000000000..3f332c70d3 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-24-selftests-netfilter-flowtable-bridge-and-vlan-suppor.patch @@ -0,0 +1,107 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:45 +0100 +Subject: [PATCH] selftests: netfilter: flowtable bridge and vlan support + +This patch adds two new tests to cover bridge and vlan support: + +- Add a bridge device to the Router1 (nsr1) container and attach the + veth0 device to the bridge. Set the IP address to the bridge device + to exercise the bridge forwarding path. + +- Add vlan encapsulation between to the bridge device in the Router1 and + one of the sender containers (ns1). + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/tools/testing/selftests/netfilter/nft_flowtable.sh ++++ b/tools/testing/selftests/netfilter/nft_flowtable.sh +@@ -370,6 +370,88 @@ else + ip netns exec nsr1 nft list ruleset + fi + ++# Another test: ++# Add bridge interface br0 to Router1, with NAT enabled. ++ip -net nsr1 link add name br0 type bridge ++ip -net nsr1 addr flush dev veth0 ++ip -net nsr1 link set up dev veth0 ++ip -net nsr1 link set veth0 master br0 ++ip -net nsr1 addr add 10.0.1.1/24 dev br0 ++ip -net nsr1 addr add dead:1::1/64 dev br0 ++ip -net nsr1 link set up dev br0 ++ ++ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null ++ ++# br0 with NAT enabled. ++ip netns exec nsr1 nft -f - <&2 ++ ip netns exec nsr1 nft list ruleset ++ ret=1 ++fi ++ ++# Another test: ++# Add bridge interface br0 to Router1, with NAT and VLAN. ++ip -net nsr1 link set veth0 nomaster ++ip -net nsr1 link set down dev veth0 ++ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10 ++ip -net nsr1 link set up dev veth0 ++ip -net nsr1 link set up dev veth0.10 ++ip -net nsr1 link set veth0.10 master br0 ++ ++ip -net ns1 addr flush dev eth0 ++ip -net ns1 link add link eth0 name eth0.10 type vlan id 10 ++ip -net ns1 link set eth0 up ++ip -net ns1 link set eth0.10 up ++ip -net ns1 addr add 10.0.1.99/24 dev eth0.10 ++ip -net ns1 route add default via 10.0.1.1 ++ip -net ns1 addr add dead:1::99/64 dev eth0.10 ++ ++if test_tcp_forwarding_nat ns1 ns2; then ++ echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" ++else ++ echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 ++ ip netns exec nsr1 nft list ruleset ++ ret=1 ++fi ++ ++# restore test topology (remove bridge and VLAN) ++ip -net nsr1 link set veth0 nomaster ++ip -net nsr1 link set veth0 down ++ip -net nsr1 link set veth0.10 down ++ip -net nsr1 link delete veth0.10 type vlan ++ip -net nsr1 link delete br0 type bridge ++ip -net ns1 addr flush dev eth0.10 ++ip -net ns1 link set eth0.10 down ++ip -net ns1 link set eth0 down ++ip -net ns1 link delete eth0.10 type vlan ++ ++# restore address in ns1 and nsr1 ++ip -net ns1 link set eth0 up ++ip -net ns1 addr add 10.0.1.99/24 dev eth0 ++ip -net ns1 route add default via 10.0.1.1 ++ip -net ns1 addr add dead:1::99/64 dev eth0 ++ip -net ns1 route add default via dead:1::1 ++ip -net nsr1 addr add 10.0.1.1/24 dev veth0 ++ip -net nsr1 addr add dead:1::1/64 dev veth0 ++ip -net nsr1 link set up dev veth0 ++ + KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) + KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) + SPI1=$RANDOM diff --git a/target/linux/generic/backport-5.15/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch b/target/linux/generic/backport-5.15/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch new file mode 100644 index 0000000000..7b6ec68d55 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-25-netfilter-flowtable-add-offload-support-for-xmit-pat.patch @@ -0,0 +1,310 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:46 +0100 +Subject: [PATCH] netfilter: flowtable: add offload support for xmit path + types + +When the flow tuple xmit_type is set to FLOW_OFFLOAD_XMIT_DIRECT, the +dst_cache pointer is not valid, and the h_source/h_dest/ifidx out fields +need to be used. + +This patch also adds the FLOW_ACTION_VLAN_PUSH action to pass the VLAN +tag to the driver. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -177,28 +177,45 @@ static int flow_offload_eth_src(struct n + enum flow_offload_tuple_dir dir, + struct nf_flow_rule *flow_rule) + { +- const struct flow_offload_tuple *tuple = &flow->tuplehash[!dir].tuple; + struct flow_action_entry *entry0 = flow_action_entry_next(flow_rule); + struct flow_action_entry *entry1 = flow_action_entry_next(flow_rule); +- struct net_device *dev; ++ const struct flow_offload_tuple *other_tuple, *this_tuple; ++ struct net_device *dev = NULL; ++ const unsigned char *addr; + u32 mask, val; + u16 val16; + +- dev = dev_get_by_index(net, tuple->iifidx); +- if (!dev) +- return -ENOENT; ++ this_tuple = &flow->tuplehash[dir].tuple; ++ ++ switch (this_tuple->xmit_type) { ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ addr = this_tuple->out.h_source; ++ break; ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ dev = dev_get_by_index(net, other_tuple->iifidx); ++ if (!dev) ++ return -ENOENT; ++ ++ addr = dev->dev_addr; ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } + + mask = ~0xffff0000; +- memcpy(&val16, dev->dev_addr, 2); ++ memcpy(&val16, addr, 2); + val = val16 << 16; + flow_offload_mangle(entry0, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 4, + &val, &mask); + + mask = ~0xffffffff; +- memcpy(&val, dev->dev_addr + 2, 4); ++ memcpy(&val, addr + 2, 4); + flow_offload_mangle(entry1, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 8, + &val, &mask); +- dev_put(dev); ++ ++ if (dev) ++ dev_put(dev); + + return 0; + } +@@ -210,27 +227,40 @@ static int flow_offload_eth_dst(struct n + { + struct flow_action_entry *entry0 = flow_action_entry_next(flow_rule); + struct flow_action_entry *entry1 = flow_action_entry_next(flow_rule); +- const void *daddr = &flow->tuplehash[!dir].tuple.src_v4; ++ const struct flow_offload_tuple *other_tuple, *this_tuple; + const struct dst_entry *dst_cache; + unsigned char ha[ETH_ALEN]; + struct neighbour *n; ++ const void *daddr; + u32 mask, val; + u8 nud_state; + u16 val16; + +- dst_cache = flow->tuplehash[dir].tuple.dst_cache; +- n = dst_neigh_lookup(dst_cache, daddr); +- if (!n) +- return -ENOENT; +- +- read_lock_bh(&n->lock); +- nud_state = n->nud_state; +- ether_addr_copy(ha, n->ha); +- read_unlock_bh(&n->lock); ++ this_tuple = &flow->tuplehash[dir].tuple; + +- if (!(nud_state & NUD_VALID)) { ++ switch (this_tuple->xmit_type) { ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ ether_addr_copy(ha, this_tuple->out.h_dest); ++ break; ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ daddr = &other_tuple->src_v4; ++ dst_cache = this_tuple->dst_cache; ++ n = dst_neigh_lookup(dst_cache, daddr); ++ if (!n) ++ return -ENOENT; ++ ++ read_lock_bh(&n->lock); ++ nud_state = n->nud_state; ++ ether_addr_copy(ha, n->ha); ++ read_unlock_bh(&n->lock); + neigh_release(n); +- return -ENOENT; ++ ++ if (!(nud_state & NUD_VALID)) ++ return -ENOENT; ++ break; ++ default: ++ return -EOPNOTSUPP; + } + + mask = ~0xffffffff; +@@ -243,7 +273,6 @@ static int flow_offload_eth_dst(struct n + val = val16; + flow_offload_mangle(entry1, FLOW_ACT_MANGLE_HDR_TYPE_ETH, 4, + &val, &mask); +- neigh_release(n); + + return 0; + } +@@ -465,27 +494,52 @@ static void flow_offload_ipv4_checksum(s + } + } + +-static void flow_offload_redirect(const struct flow_offload *flow, ++static void flow_offload_redirect(struct net *net, ++ const struct flow_offload *flow, + enum flow_offload_tuple_dir dir, + struct nf_flow_rule *flow_rule) + { +- struct flow_action_entry *entry = flow_action_entry_next(flow_rule); +- struct rtable *rt; ++ const struct flow_offload_tuple *this_tuple, *other_tuple; ++ struct flow_action_entry *entry; ++ struct net_device *dev; ++ int ifindex; ++ ++ this_tuple = &flow->tuplehash[dir].tuple; ++ switch (this_tuple->xmit_type) { ++ case FLOW_OFFLOAD_XMIT_DIRECT: ++ this_tuple = &flow->tuplehash[dir].tuple; ++ ifindex = this_tuple->out.ifidx; ++ break; ++ case FLOW_OFFLOAD_XMIT_NEIGH: ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ ifindex = other_tuple->iifidx; ++ break; ++ default: ++ return; ++ } + +- rt = (struct rtable *)flow->tuplehash[dir].tuple.dst_cache; ++ dev = dev_get_by_index(net, ifindex); ++ if (!dev) ++ return; ++ ++ entry = flow_action_entry_next(flow_rule); + entry->id = FLOW_ACTION_REDIRECT; +- entry->dev = rt->dst.dev; +- dev_hold(rt->dst.dev); ++ entry->dev = dev; + } + + static void flow_offload_encap_tunnel(const struct flow_offload *flow, + enum flow_offload_tuple_dir dir, + struct nf_flow_rule *flow_rule) + { ++ const struct flow_offload_tuple *this_tuple; + struct flow_action_entry *entry; + struct dst_entry *dst; + +- dst = flow->tuplehash[dir].tuple.dst_cache; ++ this_tuple = &flow->tuplehash[dir].tuple; ++ if (this_tuple->xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) ++ return; ++ ++ dst = this_tuple->dst_cache; + if (dst && dst->lwtstate) { + struct ip_tunnel_info *tun_info; + +@@ -502,10 +556,15 @@ static void flow_offload_decap_tunnel(co + enum flow_offload_tuple_dir dir, + struct nf_flow_rule *flow_rule) + { ++ const struct flow_offload_tuple *other_tuple; + struct flow_action_entry *entry; + struct dst_entry *dst; + +- dst = flow->tuplehash[!dir].tuple.dst_cache; ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ if (other_tuple->xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) ++ return; ++ ++ dst = other_tuple->dst_cache; + if (dst && dst->lwtstate) { + struct ip_tunnel_info *tun_info; + +@@ -517,10 +576,14 @@ static void flow_offload_decap_tunnel(co + } + } + +-int nf_flow_rule_route_ipv4(struct net *net, const struct flow_offload *flow, +- enum flow_offload_tuple_dir dir, +- struct nf_flow_rule *flow_rule) ++static int ++nf_flow_rule_route_common(struct net *net, const struct flow_offload *flow, ++ enum flow_offload_tuple_dir dir, ++ struct nf_flow_rule *flow_rule) + { ++ const struct flow_offload_tuple *other_tuple; ++ int i; ++ + flow_offload_decap_tunnel(flow, dir, flow_rule); + flow_offload_encap_tunnel(flow, dir, flow_rule); + +@@ -528,6 +591,26 @@ int nf_flow_rule_route_ipv4(struct net * + flow_offload_eth_dst(net, flow, dir, flow_rule) < 0) + return -1; + ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ ++ for (i = 0; i < other_tuple->encap_num; i++) { ++ struct flow_action_entry *entry = flow_action_entry_next(flow_rule); ++ ++ entry->id = FLOW_ACTION_VLAN_PUSH; ++ entry->vlan.vid = other_tuple->encap[i].id; ++ entry->vlan.proto = other_tuple->encap[i].proto; ++ } ++ ++ return 0; ++} ++ ++int nf_flow_rule_route_ipv4(struct net *net, const struct flow_offload *flow, ++ enum flow_offload_tuple_dir dir, ++ struct nf_flow_rule *flow_rule) ++{ ++ if (nf_flow_rule_route_common(net, flow, dir, flow_rule) < 0) ++ return -1; ++ + if (test_bit(NF_FLOW_SNAT, &flow->flags)) { + flow_offload_ipv4_snat(net, flow, dir, flow_rule); + flow_offload_port_snat(net, flow, dir, flow_rule); +@@ -540,7 +623,7 @@ int nf_flow_rule_route_ipv4(struct net * + test_bit(NF_FLOW_DNAT, &flow->flags)) + flow_offload_ipv4_checksum(net, flow, flow_rule); + +- flow_offload_redirect(flow, dir, flow_rule); ++ flow_offload_redirect(net, flow, dir, flow_rule); + + return 0; + } +@@ -550,11 +633,7 @@ int nf_flow_rule_route_ipv6(struct net * + enum flow_offload_tuple_dir dir, + struct nf_flow_rule *flow_rule) + { +- flow_offload_decap_tunnel(flow, dir, flow_rule); +- flow_offload_encap_tunnel(flow, dir, flow_rule); +- +- if (flow_offload_eth_src(net, flow, dir, flow_rule) < 0 || +- flow_offload_eth_dst(net, flow, dir, flow_rule) < 0) ++ if (nf_flow_rule_route_common(net, flow, dir, flow_rule) < 0) + return -1; + + if (test_bit(NF_FLOW_SNAT, &flow->flags)) { +@@ -566,7 +645,7 @@ int nf_flow_rule_route_ipv6(struct net * + flow_offload_port_dnat(net, flow, dir, flow_rule); + } + +- flow_offload_redirect(flow, dir, flow_rule); ++ flow_offload_redirect(net, flow, dir, flow_rule); + + return 0; + } +@@ -580,10 +659,10 @@ nf_flow_offload_rule_alloc(struct net *n + enum flow_offload_tuple_dir dir) + { + const struct nf_flowtable *flowtable = offload->flowtable; ++ const struct flow_offload_tuple *tuple, *other_tuple; + const struct flow_offload *flow = offload->flow; +- const struct flow_offload_tuple *tuple; ++ struct dst_entry *other_dst = NULL; + struct nf_flow_rule *flow_rule; +- struct dst_entry *other_dst; + int err = -ENOMEM; + + flow_rule = kzalloc(sizeof(*flow_rule), GFP_KERNEL); +@@ -599,7 +678,10 @@ nf_flow_offload_rule_alloc(struct net *n + flow_rule->rule->match.key = &flow_rule->match.key; + + tuple = &flow->tuplehash[dir].tuple; +- other_dst = flow->tuplehash[!dir].tuple.dst_cache; ++ other_tuple = &flow->tuplehash[!dir].tuple; ++ if (other_tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH) ++ other_dst = other_tuple->dst_cache; ++ + err = nf_flow_rule_match(&flow_rule->match, tuple, other_dst); + if (err < 0) + goto err_flow_match; diff --git a/target/linux/generic/backport-5.15/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch b/target/linux/generic/backport-5.15/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch new file mode 100644 index 0000000000..56bb9fd56b --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-26-netfilter-nft_flow_offload-use-direct-xmit-if-hardwa.patch @@ -0,0 +1,114 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:47 +0100 +Subject: [PATCH] netfilter: nft_flow_offload: use direct xmit if + hardware offload is enabled + +If there is a forward path to reach an ethernet device and hardware +offload is enabled, then use the direct xmit path. + +Moreover, store the real device in the direct xmit path info since +software datapath uses dev_hard_header() to push the layer encapsulation +headers while hardware offload refers to the real device. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -131,6 +131,7 @@ struct flow_offload_tuple { + struct dst_entry *dst_cache; + struct { + u32 ifidx; ++ u32 hw_ifidx; + u8 h_source[ETH_ALEN]; + u8 h_dest[ETH_ALEN]; + } out; +@@ -187,6 +188,7 @@ struct nf_flow_route { + } in; + struct { + u32 ifindex; ++ u32 hw_ifindex; + u8 h_source[ETH_ALEN]; + u8 h_dest[ETH_ALEN]; + } out; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -106,6 +106,7 @@ static int flow_offload_fill_route(struc + memcpy(flow_tuple->out.h_source, route->tuple[dir].out.h_source, + ETH_ALEN); + flow_tuple->out.ifidx = route->tuple[dir].out.ifindex; ++ flow_tuple->out.hw_ifidx = route->tuple[dir].out.hw_ifindex; + break; + case FLOW_OFFLOAD_XMIT_XFRM: + case FLOW_OFFLOAD_XMIT_NEIGH: +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -508,7 +508,7 @@ static void flow_offload_redirect(struct + switch (this_tuple->xmit_type) { + case FLOW_OFFLOAD_XMIT_DIRECT: + this_tuple = &flow->tuplehash[dir].tuple; +- ifindex = this_tuple->out.ifidx; ++ ifindex = this_tuple->out.hw_ifidx; + break; + case FLOW_OFFLOAD_XMIT_NEIGH: + other_tuple = &flow->tuplehash[!dir].tuple; +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -66,6 +66,7 @@ static int nft_dev_fill_forward_path(con + struct nft_forward_info { + const struct net_device *indev; + const struct net_device *outdev; ++ const struct net_device *hw_outdev; + struct id { + __u16 id; + __be16 proto; +@@ -76,9 +77,18 @@ struct nft_forward_info { + enum flow_offload_xmit_type xmit_type; + }; + ++static bool nft_is_valid_ether_device(const struct net_device *dev) ++{ ++ if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER || ++ dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr)) ++ return false; ++ ++ return true; ++} ++ + static void nft_dev_path_info(const struct net_device_path_stack *stack, + struct nft_forward_info *info, +- unsigned char *ha) ++ unsigned char *ha, struct nf_flowtable *flowtable) + { + const struct net_device_path *path; + int i; +@@ -140,6 +150,12 @@ static void nft_dev_path_info(const stru + } + if (!info->outdev) + info->outdev = info->indev; ++ ++ info->hw_outdev = info->indev; ++ ++ if (nf_flowtable_hw_offload(flowtable) && ++ nft_is_valid_ether_device(info->indev)) ++ info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT; + } + + static bool nft_flowtable_find_dev(const struct net_device *dev, +@@ -171,7 +187,7 @@ static void nft_dev_forward_path(struct + int i; + + if (nft_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0) +- nft_dev_path_info(&stack, &info, ha); ++ nft_dev_path_info(&stack, &info, ha, &ft->data); + + if (!info.indev || !nft_flowtable_find_dev(info.indev, ft)) + return; +@@ -187,6 +203,7 @@ static void nft_dev_forward_path(struct + memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN); + memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN); + route->tuple[dir].out.ifindex = info.outdev->ifindex; ++ route->tuple[dir].out.hw_ifindex = info.hw_outdev->ifindex; + route->tuple[dir].xmit_type = info.xmit_type; + } + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch b/target/linux/generic/backport-5.15/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch new file mode 100644 index 0000000000..7fa58ba844 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-27-netfilter-flowtable-bridge-vlan-hardware-offload-and.patch @@ -0,0 +1,123 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:48 +0100 +Subject: [PATCH] netfilter: flowtable: bridge vlan hardware offload and + switchdev + +The switch might have already added the VLAN tag through PVID hardware +offload. Keep this extra VLAN in the flowtable but skip it on egress. + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -849,6 +849,7 @@ struct net_device_path { + DEV_PATH_BR_VLAN_KEEP, + DEV_PATH_BR_VLAN_TAG, + DEV_PATH_BR_VLAN_UNTAG, ++ DEV_PATH_BR_VLAN_UNTAG_HW, + } vlan_mode; + u16 vlan_id; + __be16 vlan_proto; +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -123,9 +123,10 @@ struct flow_offload_tuple { + /* All members above are keys for lookups, see flow_offload_hash(). */ + struct { } __hash; + +- u8 dir:4, ++ u8 dir:2, + xmit_type:2, +- encap_num:2; ++ encap_num:2, ++ in_vlan_ingress:2; + u16 mtu; + union { + struct dst_entry *dst_cache; +@@ -184,7 +185,8 @@ struct nf_flow_route { + u16 id; + __be16 proto; + } encap[NF_FLOW_TABLE_ENCAP_MAX]; +- u8 num_encaps; ++ u8 num_encaps:2, ++ ingress_vlans:2; + } in; + struct { + u32 ifindex; +--- a/net/bridge/br_device.c ++++ b/net/bridge/br_device.c +@@ -435,6 +435,7 @@ static int br_fill_forward_path(struct n + ctx->vlan[ctx->num_vlans].proto = path->bridge.vlan_proto; + ctx->num_vlans++; + break; ++ case DEV_PATH_BR_VLAN_UNTAG_HW: + case DEV_PATH_BR_VLAN_UNTAG: + ctx->num_vlans--; + break; +--- a/net/bridge/br_vlan.c ++++ b/net/bridge/br_vlan.c +@@ -1374,6 +1374,8 @@ int br_vlan_fill_forward_path_mode(struc + + if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG) + path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP; ++ else if (v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV) ++ path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG_HW; + else + path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG; + +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -95,6 +95,8 @@ static int flow_offload_fill_route(struc + for (i = route->tuple[dir].in.num_encaps - 1; i >= 0; i--) { + flow_tuple->encap[j].id = route->tuple[dir].in.encap[i].id; + flow_tuple->encap[j].proto = route->tuple[dir].in.encap[i].proto; ++ if (route->tuple[dir].in.ingress_vlans & BIT(i)) ++ flow_tuple->in_vlan_ingress |= BIT(j); + j++; + } + flow_tuple->encap_num = route->tuple[dir].in.num_encaps; +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -594,8 +594,12 @@ nf_flow_rule_route_common(struct net *ne + other_tuple = &flow->tuplehash[!dir].tuple; + + for (i = 0; i < other_tuple->encap_num; i++) { +- struct flow_action_entry *entry = flow_action_entry_next(flow_rule); ++ struct flow_action_entry *entry; + ++ if (other_tuple->in_vlan_ingress & BIT(i)) ++ continue; ++ ++ entry = flow_action_entry_next(flow_rule); + entry->id = FLOW_ACTION_VLAN_PUSH; + entry->vlan.vid = other_tuple->encap[i].id; + entry->vlan.proto = other_tuple->encap[i].proto; +--- a/net/netfilter/nft_flow_offload.c ++++ b/net/netfilter/nft_flow_offload.c +@@ -72,6 +72,7 @@ struct nft_forward_info { + __be16 proto; + } encap[NF_FLOW_TABLE_ENCAP_MAX]; + u8 num_encaps; ++ u8 ingress_vlans; + u8 h_source[ETH_ALEN]; + u8 h_dest[ETH_ALEN]; + enum flow_offload_xmit_type xmit_type; +@@ -130,6 +131,9 @@ static void nft_dev_path_info(const stru + memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN); + + switch (path->bridge.vlan_mode) { ++ case DEV_PATH_BR_VLAN_UNTAG_HW: ++ info->ingress_vlans |= BIT(info->num_encaps - 1); ++ break; + case DEV_PATH_BR_VLAN_TAG: + info->encap[info->num_encaps].id = path->bridge.vlan_id; + info->encap[info->num_encaps].proto = path->bridge.vlan_proto; +@@ -198,6 +202,7 @@ static void nft_dev_forward_path(struct + route->tuple[!dir].in.encap[i].proto = info.encap[i].proto; + } + route->tuple[!dir].in.num_encaps = info.num_encaps; ++ route->tuple[!dir].in.ingress_vlans = info.ingress_vlans; + + if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) { + memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN); diff --git a/target/linux/generic/backport-5.15/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch b/target/linux/generic/backport-5.15/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch new file mode 100644 index 0000000000..64eae6871f --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-28-net-flow_offload-add-FLOW_ACTION_PPPOE_PUSH.patch @@ -0,0 +1,30 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:49 +0100 +Subject: [PATCH] net: flow_offload: add FLOW_ACTION_PPPOE_PUSH + +Add an action to represent the PPPoE hardware offload support that +includes the session ID. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/flow_offload.h ++++ b/include/net/flow_offload.h +@@ -147,6 +147,7 @@ enum flow_action_id { + FLOW_ACTION_MPLS_POP, + FLOW_ACTION_MPLS_MANGLE, + FLOW_ACTION_GATE, ++ FLOW_ACTION_PPPOE_PUSH, + NUM_FLOW_ACTIONS, + }; + +@@ -271,6 +272,9 @@ struct flow_action_entry { + u32 num_entries; + struct action_gate_entry *entries; + } gate; ++ struct { /* FLOW_ACTION_PPPOE_PUSH */ ++ u16 sid; ++ } pppoe; + }; + struct flow_action_cookie *cookie; /* user defined action cookie */ + }; diff --git a/target/linux/generic/backport-5.15/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch b/target/linux/generic/backport-5.15/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch new file mode 100644 index 0000000000..ed7346a61a --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-29-netfilter-flowtable-support-for-FLOW_ACTION_PPPOE_PU.patch @@ -0,0 +1,35 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:50 +0100 +Subject: [PATCH] netfilter: flowtable: support for + FLOW_ACTION_PPPOE_PUSH + +Add a PPPoE push action if layer 2 protocol is ETH_P_PPP_SES to add +PPPoE flowtable hardware offload support. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -600,9 +600,18 @@ nf_flow_rule_route_common(struct net *ne + continue; + + entry = flow_action_entry_next(flow_rule); +- entry->id = FLOW_ACTION_VLAN_PUSH; +- entry->vlan.vid = other_tuple->encap[i].id; +- entry->vlan.proto = other_tuple->encap[i].proto; ++ ++ switch (other_tuple->encap[i].proto) { ++ case htons(ETH_P_PPP_SES): ++ entry->id = FLOW_ACTION_PPPOE_PUSH; ++ entry->pppoe.sid = other_tuple->encap[i].id; ++ break; ++ case htons(ETH_P_8021Q): ++ entry->id = FLOW_ACTION_VLAN_PUSH; ++ entry->vlan.vid = other_tuple->encap[i].id; ++ entry->vlan.proto = other_tuple->encap[i].proto; ++ break; ++ } + } + + return 0; diff --git a/target/linux/generic/backport-5.15/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch b/target/linux/generic/backport-5.15/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch new file mode 100644 index 0000000000..72675dc294 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-30-dsa-slave-add-support-for-TC_SETUP_FT.patch @@ -0,0 +1,53 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:51 +0100 +Subject: [PATCH] dsa: slave: add support for TC_SETUP_FT + +The dsa infrastructure provides a well-defined hierarchy of devices, +pass up the call to set up the flow block to the master device. From the +software dataplane, the netfilter infrastructure uses the dsa slave +devices to refer to the input and output device for the given skbuff. +Similarly, the flowtable definition in the ruleset refers to the dsa +slave port devices. + +This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT +with the master device via the dsa slave devices. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -1239,14 +1239,32 @@ static int dsa_slave_setup_tc_block(stru + } + } + ++static int dsa_slave_setup_ft_block(struct dsa_switch *ds, int port, ++ void *type_data) ++{ ++ struct dsa_port *cpu_dp = dsa_to_port(ds, port)->cpu_dp; ++ struct net_device *master = cpu_dp->master; ++ ++ if (!master->netdev_ops->ndo_setup_tc) ++ return -EOPNOTSUPP; ++ ++ return master->netdev_ops->ndo_setup_tc(master, TC_SETUP_FT, type_data); ++} ++ + static int dsa_slave_setup_tc(struct net_device *dev, enum tc_setup_type type, + void *type_data) + { + struct dsa_port *dp = dsa_slave_to_port(dev); + struct dsa_switch *ds = dp->ds; + +- if (type == TC_SETUP_BLOCK) ++ switch (type) { ++ case TC_SETUP_BLOCK: + return dsa_slave_setup_tc_block(dev, type_data); ++ case TC_SETUP_FT: ++ return dsa_slave_setup_ft_block(ds, dp->index, type_data); ++ default: ++ break; ++ } + + if (!ds->ops->port_setup_tc) + return -EOPNOTSUPP; diff --git a/target/linux/generic/backport-5.15/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch b/target/linux/generic/backport-5.15/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch new file mode 100644 index 0000000000..b763984732 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch @@ -0,0 +1,68 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:52 +0100 +Subject: [PATCH] net: ethernet: mtk_eth_soc: fix parsing packets in GDM + +When using DSA, set the special tag in GDM ingress control to allow the MAC +to parse packets properly earlier. This affects rx DMA source port reporting. + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + + #include "mtk_eth_soc.h" + +@@ -1285,13 +1286,12 @@ static int mtk_poll_rx(struct napi_struc + break; + + /* find out which mac the packet come from. values start at 1 */ +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) { ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) || ++ (trxd.rxd4 & RX_DMA_SPECIAL_TAG)) + mac = 0; +- } else { +- mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) & +- RX_DMA_FPORT_MASK; +- mac--; +- } ++ else ++ mac = ((trxd.rxd4 >> RX_DMA_FPORT_SHIFT) & ++ RX_DMA_FPORT_MASK) - 1; + + if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT || + !eth->netdev[mac])) +@@ -2254,6 +2254,9 @@ static void mtk_gdm_config(struct mtk_et + + val |= config; + ++ if (!i && eth->netdev[0] && netdev_uses_dsa(eth->netdev[0])) ++ val |= MTK_GDMA_SPECIAL_TAG; ++ + mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i)); + } + /* Reset and enable PSE */ +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -81,6 +81,7 @@ + + /* GDM Exgress Control Register */ + #define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000)) ++#define MTK_GDMA_SPECIAL_TAG BIT(24) + #define MTK_GDMA_ICS_EN BIT(22) + #define MTK_GDMA_TCS_EN BIT(21) + #define MTK_GDMA_UCS_EN BIT(20) +@@ -318,6 +319,7 @@ + #define RX_DMA_L4_VALID_PDMA BIT(30) /* when PDMA is used */ + #define RX_DMA_FPORT_SHIFT 19 + #define RX_DMA_FPORT_MASK 0x7 ++#define RX_DMA_SPECIAL_TAG BIT(22) + + /* PHY Indirect Access Control registers */ + #define MTK_PHY_IAC 0x10004 diff --git a/target/linux/generic/backport-5.15/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch b/target/linux/generic/backport-5.15/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch new file mode 100644 index 0000000000..4fd6f8a36b --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch @@ -0,0 +1,1308 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:53 +0100 +Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for + initializing the PPE + +The PPE (packet processing engine) is used to offload NAT/routed or even +bridged flows. This patch brings up the PPE and uses it to get a packet +hash. It also contains some functionality that will be used to bring up +flow offloading. + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.c + create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe.h + create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c + create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_regs.h + +--- a/drivers/net/ethernet/mediatek/Makefile ++++ b/drivers/net/ethernet/mediatek/Makefile +@@ -4,5 +4,5 @@ + # + + obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o +-mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o ++mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o + obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2279,12 +2279,17 @@ static int mtk_open(struct net_device *d + + /* we run 2 netdevs on the same dma ring so we only bring it up once */ + if (!refcount_read(ð->dma_refcnt)) { +- int err = mtk_start_dma(eth); ++ u32 gdm_config = MTK_GDMA_TO_PDMA; ++ int err; + ++ err = mtk_start_dma(eth); + if (err) + return err; + +- mtk_gdm_config(eth, MTK_GDMA_TO_PDMA); ++ if (eth->soc->offload_version && mtk_ppe_start(ð->ppe) == 0) ++ gdm_config = MTK_GDMA_TO_PPE; ++ ++ mtk_gdm_config(eth, gdm_config); + + napi_enable(ð->tx_napi); + napi_enable(ð->rx_napi); +@@ -2351,6 +2356,9 @@ static int mtk_stop(struct net_device *d + + mtk_dma_free(eth); + ++ if (eth->soc->offload_version) ++ mtk_ppe_stop(ð->ppe); ++ + return 0; + } + +@@ -3079,6 +3087,13 @@ static int mtk_probe(struct platform_dev + goto err_free_dev; + } + ++ if (eth->soc->offload_version) { ++ err = mtk_ppe_init(ð->ppe, eth->dev, ++ eth->base + MTK_ETH_PPE_BASE, 2); ++ if (err) ++ goto err_free_dev; ++ } ++ + for (i = 0; i < MTK_MAX_DEVS; i++) { + if (!eth->netdev[i]) + continue; +@@ -3153,6 +3168,7 @@ static const struct mtk_soc_data mt7621_ + .hw_features = MTK_HW_FEATURES, + .required_clks = MT7621_CLKS_BITMAP, + .required_pctl = false, ++ .offload_version = 2, + }; + + static const struct mtk_soc_data mt7622_data = { +@@ -3161,6 +3177,7 @@ static const struct mtk_soc_data mt7622_ + .hw_features = MTK_HW_FEATURES, + .required_clks = MT7622_CLKS_BITMAP, + .required_pctl = false, ++ .offload_version = 2, + }; + + static const struct mtk_soc_data mt7623_data = { +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include "mtk_ppe.h" + + #define MTK_QDMA_PAGE_SIZE 2048 + #define MTK_MAX_RX_LENGTH 1536 +@@ -86,6 +87,7 @@ + #define MTK_GDMA_TCS_EN BIT(21) + #define MTK_GDMA_UCS_EN BIT(20) + #define MTK_GDMA_TO_PDMA 0x0 ++#define MTK_GDMA_TO_PPE 0x4444 + #define MTK_GDMA_DROP_ALL 0x7777 + + /* Unicast Filter MAC Address Register - Low */ +@@ -315,6 +317,12 @@ + #define RX_DMA_VID(_x) ((_x) & 0xfff) + + /* QDMA descriptor rxd4 */ ++#define MTK_RXD4_FOE_ENTRY GENMASK(13, 0) ++#define MTK_RXD4_PPE_CPU_REASON GENMASK(18, 14) ++#define MTK_RXD4_SRC_PORT GENMASK(21, 19) ++#define MTK_RXD4_ALG GENMASK(31, 22) ++ ++/* QDMA descriptor rxd4 */ + #define RX_DMA_L4_VALID BIT(24) + #define RX_DMA_L4_VALID_PDMA BIT(30) /* when PDMA is used */ + #define RX_DMA_FPORT_SHIFT 19 +@@ -819,6 +827,7 @@ struct mtk_soc_data { + u32 caps; + u32 required_clks; + bool required_pctl; ++ u8 offload_version; + netdev_features_t hw_features; + }; + +@@ -918,6 +927,8 @@ struct mtk_eth { + u32 tx_int_status_reg; + u32 rx_dma_l4_valid; + int ip_align; ++ ++ struct mtk_ppe ppe; + }; + + /* struct mtk_mac - the structure that holds the info about the MACs of the +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_ppe.c +@@ -0,0 +1,511 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* Copyright (C) 2020 Felix Fietkau */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "mtk_ppe.h" ++#include "mtk_ppe_regs.h" ++ ++static void ppe_w32(struct mtk_ppe *ppe, u32 reg, u32 val) ++{ ++ writel(val, ppe->base + reg); ++} ++ ++static u32 ppe_r32(struct mtk_ppe *ppe, u32 reg) ++{ ++ return readl(ppe->base + reg); ++} ++ ++static u32 ppe_m32(struct mtk_ppe *ppe, u32 reg, u32 mask, u32 set) ++{ ++ u32 val; ++ ++ val = ppe_r32(ppe, reg); ++ val &= ~mask; ++ val |= set; ++ ppe_w32(ppe, reg, val); ++ ++ return val; ++} ++ ++static u32 ppe_set(struct mtk_ppe *ppe, u32 reg, u32 val) ++{ ++ return ppe_m32(ppe, reg, 0, val); ++} ++ ++static u32 ppe_clear(struct mtk_ppe *ppe, u32 reg, u32 val) ++{ ++ return ppe_m32(ppe, reg, val, 0); ++} ++ ++static int mtk_ppe_wait_busy(struct mtk_ppe *ppe) ++{ ++ unsigned long timeout = jiffies + HZ; ++ ++ while (time_is_before_jiffies(timeout)) { ++ if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY)) ++ return 0; ++ ++ usleep_range(10, 20); ++ } ++ ++ dev_err(ppe->dev, "PPE table busy"); ++ ++ return -ETIMEDOUT; ++} ++ ++static void mtk_ppe_cache_clear(struct mtk_ppe *ppe) ++{ ++ ppe_set(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR); ++ ppe_clear(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR); ++} ++ ++static void mtk_ppe_cache_enable(struct mtk_ppe *ppe, bool enable) ++{ ++ mtk_ppe_cache_clear(ppe); ++ ++ ppe_m32(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_EN, ++ enable * MTK_PPE_CACHE_CTL_EN); ++} ++ ++static u32 mtk_ppe_hash_entry(struct mtk_foe_entry *e) ++{ ++ u32 hv1, hv2, hv3; ++ u32 hash; ++ ++ switch (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, e->ib1)) { ++ case MTK_PPE_PKT_TYPE_BRIDGE: ++ hv1 = e->bridge.src_mac_lo; ++ hv1 ^= ((e->bridge.src_mac_hi & 0xffff) << 16); ++ hv2 = e->bridge.src_mac_hi >> 16; ++ hv2 ^= e->bridge.dest_mac_lo; ++ hv3 = e->bridge.dest_mac_hi; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV4_ROUTE: ++ case MTK_PPE_PKT_TYPE_IPV4_HNAPT: ++ hv1 = e->ipv4.orig.ports; ++ hv2 = e->ipv4.orig.dest_ip; ++ hv3 = e->ipv4.orig.src_ip; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T: ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T: ++ hv1 = e->ipv6.src_ip[3] ^ e->ipv6.dest_ip[3]; ++ hv1 ^= e->ipv6.ports; ++ ++ hv2 = e->ipv6.src_ip[2] ^ e->ipv6.dest_ip[2]; ++ hv2 ^= e->ipv6.dest_ip[0]; ++ ++ hv3 = e->ipv6.src_ip[1] ^ e->ipv6.dest_ip[1]; ++ hv3 ^= e->ipv6.src_ip[0]; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV4_DSLITE: ++ case MTK_PPE_PKT_TYPE_IPV6_6RD: ++ default: ++ WARN_ON_ONCE(1); ++ return MTK_PPE_HASH_MASK; ++ } ++ ++ hash = (hv1 & hv2) | ((~hv1) & hv3); ++ hash = (hash >> 24) | ((hash & 0xffffff) << 8); ++ hash ^= hv1 ^ hv2 ^ hv3; ++ hash ^= hash >> 16; ++ hash <<= 1; ++ hash &= MTK_PPE_ENTRIES - 1; ++ ++ return hash; ++} ++ ++static inline struct mtk_foe_mac_info * ++mtk_foe_entry_l2(struct mtk_foe_entry *entry) ++{ ++ int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); ++ ++ if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) ++ return &entry->ipv6.l2; ++ ++ return &entry->ipv4.l2; ++} ++ ++static inline u32 * ++mtk_foe_entry_ib2(struct mtk_foe_entry *entry) ++{ ++ int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); ++ ++ if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) ++ return &entry->ipv6.ib2; ++ ++ return &entry->ipv4.ib2; ++} ++ ++int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto, ++ u8 pse_port, u8 *src_mac, u8 *dest_mac) ++{ ++ struct mtk_foe_mac_info *l2; ++ u32 ports_pad, val; ++ ++ memset(entry, 0, sizeof(*entry)); ++ ++ val = FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_BIND) | ++ FIELD_PREP(MTK_FOE_IB1_PACKET_TYPE, type) | ++ FIELD_PREP(MTK_FOE_IB1_UDP, l4proto == IPPROTO_UDP) | ++ MTK_FOE_IB1_BIND_TTL | ++ MTK_FOE_IB1_BIND_CACHE; ++ entry->ib1 = val; ++ ++ val = FIELD_PREP(MTK_FOE_IB2_PORT_MG, 0x3f) | ++ FIELD_PREP(MTK_FOE_IB2_PORT_AG, 0x1f) | ++ FIELD_PREP(MTK_FOE_IB2_DEST_PORT, pse_port); ++ ++ if (is_multicast_ether_addr(dest_mac)) ++ val |= MTK_FOE_IB2_MULTICAST; ++ ++ ports_pad = 0xa5a5a500 | (l4proto & 0xff); ++ if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE) ++ entry->ipv4.orig.ports = ports_pad; ++ if (type == MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T) ++ entry->ipv6.ports = ports_pad; ++ ++ if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) { ++ entry->ipv6.ib2 = val; ++ l2 = &entry->ipv6.l2; ++ } else { ++ entry->ipv4.ib2 = val; ++ l2 = &entry->ipv4.l2; ++ } ++ ++ l2->dest_mac_hi = get_unaligned_be32(dest_mac); ++ l2->dest_mac_lo = get_unaligned_be16(dest_mac + 4); ++ l2->src_mac_hi = get_unaligned_be32(src_mac); ++ l2->src_mac_lo = get_unaligned_be16(src_mac + 4); ++ ++ if (type >= MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T) ++ l2->etype = ETH_P_IPV6; ++ else ++ l2->etype = ETH_P_IP; ++ ++ return 0; ++} ++ ++int mtk_foe_entry_set_pse_port(struct mtk_foe_entry *entry, u8 port) ++{ ++ u32 *ib2 = mtk_foe_entry_ib2(entry); ++ u32 val; ++ ++ val = *ib2; ++ val &= ~MTK_FOE_IB2_DEST_PORT; ++ val |= FIELD_PREP(MTK_FOE_IB2_DEST_PORT, port); ++ *ib2 = val; ++ ++ return 0; ++} ++ ++int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool egress, ++ __be32 src_addr, __be16 src_port, ++ __be32 dest_addr, __be16 dest_port) ++{ ++ int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); ++ struct mtk_ipv4_tuple *t; ++ ++ switch (type) { ++ case MTK_PPE_PKT_TYPE_IPV4_HNAPT: ++ if (egress) { ++ t = &entry->ipv4.new; ++ break; ++ } ++ fallthrough; ++ case MTK_PPE_PKT_TYPE_IPV4_DSLITE: ++ case MTK_PPE_PKT_TYPE_IPV4_ROUTE: ++ t = &entry->ipv4.orig; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV6_6RD: ++ entry->ipv6_6rd.tunnel_src_ip = be32_to_cpu(src_addr); ++ entry->ipv6_6rd.tunnel_dest_ip = be32_to_cpu(dest_addr); ++ return 0; ++ default: ++ WARN_ON_ONCE(1); ++ return -EINVAL; ++ } ++ ++ t->src_ip = be32_to_cpu(src_addr); ++ t->dest_ip = be32_to_cpu(dest_addr); ++ ++ if (type == MTK_PPE_PKT_TYPE_IPV4_ROUTE) ++ return 0; ++ ++ t->src_port = be16_to_cpu(src_port); ++ t->dest_port = be16_to_cpu(dest_port); ++ ++ return 0; ++} ++ ++int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry, ++ __be32 *src_addr, __be16 src_port, ++ __be32 *dest_addr, __be16 dest_port) ++{ ++ int type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); ++ u32 *src, *dest; ++ int i; ++ ++ switch (type) { ++ case MTK_PPE_PKT_TYPE_IPV4_DSLITE: ++ src = entry->dslite.tunnel_src_ip; ++ dest = entry->dslite.tunnel_dest_ip; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T: ++ case MTK_PPE_PKT_TYPE_IPV6_6RD: ++ entry->ipv6.src_port = be16_to_cpu(src_port); ++ entry->ipv6.dest_port = be16_to_cpu(dest_port); ++ fallthrough; ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T: ++ src = entry->ipv6.src_ip; ++ dest = entry->ipv6.dest_ip; ++ break; ++ default: ++ WARN_ON_ONCE(1); ++ return -EINVAL; ++ }; ++ ++ for (i = 0; i < 4; i++) ++ src[i] = be32_to_cpu(src_addr[i]); ++ for (i = 0; i < 4; i++) ++ dest[i] = be32_to_cpu(dest_addr[i]); ++ ++ return 0; ++} ++ ++int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port) ++{ ++ struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry); ++ ++ l2->etype = BIT(port); ++ ++ if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER)) ++ entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1); ++ else ++ l2->etype |= BIT(8); ++ ++ entry->ib1 &= ~MTK_FOE_IB1_BIND_VLAN_TAG; ++ ++ return 0; ++} ++ ++int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid) ++{ ++ struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry); ++ ++ switch (FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, entry->ib1)) { ++ case 0: ++ entry->ib1 |= MTK_FOE_IB1_BIND_VLAN_TAG | ++ FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1); ++ l2->vlan1 = vid; ++ return 0; ++ case 1: ++ if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG)) { ++ l2->vlan1 = vid; ++ l2->etype |= BIT(8); ++ } else { ++ l2->vlan2 = vid; ++ entry->ib1 += FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, 1); ++ } ++ return 0; ++ default: ++ return -ENOSPC; ++ } ++} ++ ++int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid) ++{ ++ struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(entry); ++ ++ if (!(entry->ib1 & MTK_FOE_IB1_BIND_VLAN_LAYER) || ++ (entry->ib1 & MTK_FOE_IB1_BIND_VLAN_TAG)) ++ l2->etype = ETH_P_PPP_SES; ++ ++ entry->ib1 |= MTK_FOE_IB1_BIND_PPPOE; ++ l2->pppoe_id = sid; ++ ++ return 0; ++} ++ ++static inline bool mtk_foe_entry_usable(struct mtk_foe_entry *entry) ++{ ++ return !(entry->ib1 & MTK_FOE_IB1_STATIC) && ++ FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1) != MTK_FOE_STATE_BIND; ++} ++ ++int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry, ++ u16 timestamp) ++{ ++ struct mtk_foe_entry *hwe; ++ u32 hash; ++ ++ timestamp &= MTK_FOE_IB1_BIND_TIMESTAMP; ++ entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP; ++ entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_TIMESTAMP, timestamp); ++ ++ hash = mtk_ppe_hash_entry(entry); ++ hwe = &ppe->foe_table[hash]; ++ if (!mtk_foe_entry_usable(hwe)) { ++ hwe++; ++ hash++; ++ ++ if (!mtk_foe_entry_usable(hwe)) ++ return -ENOSPC; ++ } ++ ++ memcpy(&hwe->data, &entry->data, sizeof(hwe->data)); ++ wmb(); ++ hwe->ib1 = entry->ib1; ++ ++ dma_wmb(); ++ ++ mtk_ppe_cache_clear(ppe); ++ ++ return hash; ++} ++ ++int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base, ++ int version) ++{ ++ struct mtk_foe_entry *foe; ++ ++ /* need to allocate a separate device, since it PPE DMA access is ++ * not coherent. ++ */ ++ ppe->base = base; ++ ppe->dev = dev; ++ ppe->version = version; ++ ++ foe = dmam_alloc_coherent(ppe->dev, MTK_PPE_ENTRIES * sizeof(*foe), ++ &ppe->foe_phys, GFP_KERNEL); ++ if (!foe) ++ return -ENOMEM; ++ ++ ppe->foe_table = foe; ++ ++ mtk_ppe_debugfs_init(ppe); ++ ++ return 0; ++} ++ ++static void mtk_ppe_init_foe_table(struct mtk_ppe *ppe) ++{ ++ static const u8 skip[] = { 12, 25, 38, 51, 76, 89, 102 }; ++ int i, k; ++ ++ memset(ppe->foe_table, 0, MTK_PPE_ENTRIES * sizeof(ppe->foe_table)); ++ ++ if (!IS_ENABLED(CONFIG_SOC_MT7621)) ++ return; ++ ++ /* skip all entries that cross the 1024 byte boundary */ ++ for (i = 0; i < MTK_PPE_ENTRIES; i += 128) ++ for (k = 0; k < ARRAY_SIZE(skip); k++) ++ ppe->foe_table[i + skip[k]].ib1 |= MTK_FOE_IB1_STATIC; ++} ++ ++int mtk_ppe_start(struct mtk_ppe *ppe) ++{ ++ u32 val; ++ ++ mtk_ppe_init_foe_table(ppe); ++ ppe_w32(ppe, MTK_PPE_TB_BASE, ppe->foe_phys); ++ ++ val = MTK_PPE_TB_CFG_ENTRY_80B | ++ MTK_PPE_TB_CFG_AGE_NON_L4 | ++ MTK_PPE_TB_CFG_AGE_UNBIND | ++ MTK_PPE_TB_CFG_AGE_TCP | ++ MTK_PPE_TB_CFG_AGE_UDP | ++ MTK_PPE_TB_CFG_AGE_TCP_FIN | ++ FIELD_PREP(MTK_PPE_TB_CFG_SEARCH_MISS, ++ MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD) | ++ FIELD_PREP(MTK_PPE_TB_CFG_KEEPALIVE, ++ MTK_PPE_KEEPALIVE_DISABLE) | ++ FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) | ++ FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE, ++ MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) | ++ FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM, ++ MTK_PPE_ENTRIES_SHIFT); ++ ppe_w32(ppe, MTK_PPE_TB_CFG, val); ++ ++ ppe_w32(ppe, MTK_PPE_IP_PROTO_CHK, ++ MTK_PPE_IP_PROTO_CHK_IPV4 | MTK_PPE_IP_PROTO_CHK_IPV6); ++ ++ mtk_ppe_cache_enable(ppe, true); ++ ++ val = MTK_PPE_FLOW_CFG_IP4_TCP_FRAG | ++ MTK_PPE_FLOW_CFG_IP4_UDP_FRAG | ++ MTK_PPE_FLOW_CFG_IP6_3T_ROUTE | ++ MTK_PPE_FLOW_CFG_IP6_5T_ROUTE | ++ MTK_PPE_FLOW_CFG_IP6_6RD | ++ MTK_PPE_FLOW_CFG_IP4_NAT | ++ MTK_PPE_FLOW_CFG_IP4_NAPT | ++ MTK_PPE_FLOW_CFG_IP4_DSLITE | ++ MTK_PPE_FLOW_CFG_L2_BRIDGE | ++ MTK_PPE_FLOW_CFG_IP4_NAT_FRAG; ++ ppe_w32(ppe, MTK_PPE_FLOW_CFG, val); ++ ++ val = FIELD_PREP(MTK_PPE_UNBIND_AGE_MIN_PACKETS, 1000) | ++ FIELD_PREP(MTK_PPE_UNBIND_AGE_DELTA, 3); ++ ppe_w32(ppe, MTK_PPE_UNBIND_AGE, val); ++ ++ val = FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_UDP, 12) | ++ FIELD_PREP(MTK_PPE_BIND_AGE0_DELTA_NON_L4, 1); ++ ppe_w32(ppe, MTK_PPE_BIND_AGE0, val); ++ ++ val = FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP_FIN, 1) | ++ FIELD_PREP(MTK_PPE_BIND_AGE1_DELTA_TCP, 7); ++ ppe_w32(ppe, MTK_PPE_BIND_AGE1, val); ++ ++ val = MTK_PPE_BIND_LIMIT0_QUARTER | MTK_PPE_BIND_LIMIT0_HALF; ++ ppe_w32(ppe, MTK_PPE_BIND_LIMIT0, val); ++ ++ val = MTK_PPE_BIND_LIMIT1_FULL | ++ FIELD_PREP(MTK_PPE_BIND_LIMIT1_NON_L4, 1); ++ ppe_w32(ppe, MTK_PPE_BIND_LIMIT1, val); ++ ++ val = FIELD_PREP(MTK_PPE_BIND_RATE_BIND, 30) | ++ FIELD_PREP(MTK_PPE_BIND_RATE_PREBIND, 1); ++ ppe_w32(ppe, MTK_PPE_BIND_RATE, val); ++ ++ /* enable PPE */ ++ val = MTK_PPE_GLO_CFG_EN | ++ MTK_PPE_GLO_CFG_IP4_L4_CS_DROP | ++ MTK_PPE_GLO_CFG_IP4_CS_DROP | ++ MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE; ++ ppe_w32(ppe, MTK_PPE_GLO_CFG, val); ++ ++ ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT, 0); ++ ++ return 0; ++} ++ ++int mtk_ppe_stop(struct mtk_ppe *ppe) ++{ ++ u32 val; ++ int i; ++ ++ for (i = 0; i < MTK_PPE_ENTRIES; i++) ++ ppe->foe_table[i].ib1 = FIELD_PREP(MTK_FOE_IB1_STATE, ++ MTK_FOE_STATE_INVALID); ++ ++ mtk_ppe_cache_enable(ppe, false); ++ ++ /* disable offload engine */ ++ ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN); ++ ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0); ++ ++ /* disable aging */ ++ val = MTK_PPE_TB_CFG_AGE_NON_L4 | ++ MTK_PPE_TB_CFG_AGE_UNBIND | ++ MTK_PPE_TB_CFG_AGE_TCP | ++ MTK_PPE_TB_CFG_AGE_UDP | ++ MTK_PPE_TB_CFG_AGE_TCP_FIN; ++ ppe_clear(ppe, MTK_PPE_TB_CFG, val); ++ ++ return mtk_ppe_wait_busy(ppe); ++} +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_ppe.h +@@ -0,0 +1,287 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* Copyright (C) 2020 Felix Fietkau */ ++ ++#ifndef __MTK_PPE_H ++#define __MTK_PPE_H ++ ++#include ++#include ++ ++#define MTK_ETH_PPE_BASE 0xc00 ++ ++#define MTK_PPE_ENTRIES_SHIFT 3 ++#define MTK_PPE_ENTRIES (1024 << MTK_PPE_ENTRIES_SHIFT) ++#define MTK_PPE_HASH_MASK (MTK_PPE_ENTRIES - 1) ++ ++#define MTK_FOE_IB1_UNBIND_TIMESTAMP GENMASK(7, 0) ++#define MTK_FOE_IB1_UNBIND_PACKETS GENMASK(23, 8) ++#define MTK_FOE_IB1_UNBIND_PREBIND BIT(24) ++ ++#define MTK_FOE_IB1_BIND_TIMESTAMP GENMASK(14, 0) ++#define MTK_FOE_IB1_BIND_KEEPALIVE BIT(15) ++#define MTK_FOE_IB1_BIND_VLAN_LAYER GENMASK(18, 16) ++#define MTK_FOE_IB1_BIND_PPPOE BIT(19) ++#define MTK_FOE_IB1_BIND_VLAN_TAG BIT(20) ++#define MTK_FOE_IB1_BIND_PKT_SAMPLE BIT(21) ++#define MTK_FOE_IB1_BIND_CACHE BIT(22) ++#define MTK_FOE_IB1_BIND_TUNNEL_DECAP BIT(23) ++#define MTK_FOE_IB1_BIND_TTL BIT(24) ++ ++#define MTK_FOE_IB1_PACKET_TYPE GENMASK(27, 25) ++#define MTK_FOE_IB1_STATE GENMASK(29, 28) ++#define MTK_FOE_IB1_UDP BIT(30) ++#define MTK_FOE_IB1_STATIC BIT(31) ++ ++enum { ++ MTK_PPE_PKT_TYPE_IPV4_HNAPT = 0, ++ MTK_PPE_PKT_TYPE_IPV4_ROUTE = 1, ++ MTK_PPE_PKT_TYPE_BRIDGE = 2, ++ MTK_PPE_PKT_TYPE_IPV4_DSLITE = 3, ++ MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T = 4, ++ MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T = 5, ++ MTK_PPE_PKT_TYPE_IPV6_6RD = 7, ++}; ++ ++#define MTK_FOE_IB2_QID GENMASK(3, 0) ++#define MTK_FOE_IB2_PSE_QOS BIT(4) ++#define MTK_FOE_IB2_DEST_PORT GENMASK(7, 5) ++#define MTK_FOE_IB2_MULTICAST BIT(8) ++ ++#define MTK_FOE_IB2_WHNAT_QID2 GENMASK(13, 12) ++#define MTK_FOE_IB2_WHNAT_DEVIDX BIT(16) ++#define MTK_FOE_IB2_WHNAT_NAT BIT(17) ++ ++#define MTK_FOE_IB2_PORT_MG GENMASK(17, 12) ++ ++#define MTK_FOE_IB2_PORT_AG GENMASK(23, 18) ++ ++#define MTK_FOE_IB2_DSCP GENMASK(31, 24) ++ ++#define MTK_FOE_VLAN2_WHNAT_BSS GEMMASK(5, 0) ++#define MTK_FOE_VLAN2_WHNAT_WCID GENMASK(13, 6) ++#define MTK_FOE_VLAN2_WHNAT_RING GENMASK(15, 14) ++ ++enum { ++ MTK_FOE_STATE_INVALID, ++ MTK_FOE_STATE_UNBIND, ++ MTK_FOE_STATE_BIND, ++ MTK_FOE_STATE_FIN ++}; ++ ++struct mtk_foe_mac_info { ++ u16 vlan1; ++ u16 etype; ++ ++ u32 dest_mac_hi; ++ ++ u16 vlan2; ++ u16 dest_mac_lo; ++ ++ u32 src_mac_hi; ++ ++ u16 pppoe_id; ++ u16 src_mac_lo; ++}; ++ ++struct mtk_foe_bridge { ++ u32 dest_mac_hi; ++ ++ u16 src_mac_lo; ++ u16 dest_mac_lo; ++ ++ u32 src_mac_hi; ++ ++ u32 ib2; ++ ++ u32 _rsv[5]; ++ ++ u32 udf_tsid; ++ struct mtk_foe_mac_info l2; ++}; ++ ++struct mtk_ipv4_tuple { ++ u32 src_ip; ++ u32 dest_ip; ++ union { ++ struct { ++ u16 dest_port; ++ u16 src_port; ++ }; ++ struct { ++ u8 protocol; ++ u8 _pad[3]; /* fill with 0xa5a5a5 */ ++ }; ++ u32 ports; ++ }; ++}; ++ ++struct mtk_foe_ipv4 { ++ struct mtk_ipv4_tuple orig; ++ ++ u32 ib2; ++ ++ struct mtk_ipv4_tuple new; ++ ++ u16 timestamp; ++ u16 _rsv0[3]; ++ ++ u32 udf_tsid; ++ ++ struct mtk_foe_mac_info l2; ++}; ++ ++struct mtk_foe_ipv4_dslite { ++ struct mtk_ipv4_tuple ip4; ++ ++ u32 tunnel_src_ip[4]; ++ u32 tunnel_dest_ip[4]; ++ ++ u8 flow_label[3]; ++ u8 priority; ++ ++ u32 udf_tsid; ++ ++ u32 ib2; ++ ++ struct mtk_foe_mac_info l2; ++}; ++ ++struct mtk_foe_ipv6 { ++ u32 src_ip[4]; ++ u32 dest_ip[4]; ++ ++ union { ++ struct { ++ u8 protocol; ++ u8 _pad[3]; /* fill with 0xa5a5a5 */ ++ }; /* 3-tuple */ ++ struct { ++ u16 dest_port; ++ u16 src_port; ++ }; /* 5-tuple */ ++ u32 ports; ++ }; ++ ++ u32 _rsv[3]; ++ ++ u32 udf; ++ ++ u32 ib2; ++ struct mtk_foe_mac_info l2; ++}; ++ ++struct mtk_foe_ipv6_6rd { ++ u32 src_ip[4]; ++ u32 dest_ip[4]; ++ u16 dest_port; ++ u16 src_port; ++ ++ u32 tunnel_src_ip; ++ u32 tunnel_dest_ip; ++ ++ u16 hdr_csum; ++ u8 dscp; ++ u8 ttl; ++ ++ u8 flag; ++ u8 pad; ++ u8 per_flow_6rd_id; ++ u8 pad2; ++ ++ u32 ib2; ++ struct mtk_foe_mac_info l2; ++}; ++ ++struct mtk_foe_entry { ++ u32 ib1; ++ ++ union { ++ struct mtk_foe_bridge bridge; ++ struct mtk_foe_ipv4 ipv4; ++ struct mtk_foe_ipv4_dslite dslite; ++ struct mtk_foe_ipv6 ipv6; ++ struct mtk_foe_ipv6_6rd ipv6_6rd; ++ u32 data[19]; ++ }; ++}; ++ ++enum { ++ MTK_PPE_CPU_REASON_TTL_EXCEEDED = 0x02, ++ MTK_PPE_CPU_REASON_OPTION_HEADER = 0x03, ++ MTK_PPE_CPU_REASON_NO_FLOW = 0x07, ++ MTK_PPE_CPU_REASON_IPV4_FRAG = 0x08, ++ MTK_PPE_CPU_REASON_IPV4_DSLITE_FRAG = 0x09, ++ MTK_PPE_CPU_REASON_IPV4_DSLITE_NO_TCP_UDP = 0x0a, ++ MTK_PPE_CPU_REASON_IPV6_6RD_NO_TCP_UDP = 0x0b, ++ MTK_PPE_CPU_REASON_TCP_FIN_SYN_RST = 0x0c, ++ MTK_PPE_CPU_REASON_UN_HIT = 0x0d, ++ MTK_PPE_CPU_REASON_HIT_UNBIND = 0x0e, ++ MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED = 0x0f, ++ MTK_PPE_CPU_REASON_HIT_BIND_TCP_FIN = 0x10, ++ MTK_PPE_CPU_REASON_HIT_TTL_1 = 0x11, ++ MTK_PPE_CPU_REASON_HIT_BIND_VLAN_VIOLATION = 0x12, ++ MTK_PPE_CPU_REASON_KEEPALIVE_UC_OLD_HDR = 0x13, ++ MTK_PPE_CPU_REASON_KEEPALIVE_MC_NEW_HDR = 0x14, ++ MTK_PPE_CPU_REASON_KEEPALIVE_DUP_OLD_HDR = 0x15, ++ MTK_PPE_CPU_REASON_HIT_BIND_FORCE_CPU = 0x16, ++ MTK_PPE_CPU_REASON_TUNNEL_OPTION_HEADER = 0x17, ++ MTK_PPE_CPU_REASON_MULTICAST_TO_CPU = 0x18, ++ MTK_PPE_CPU_REASON_MULTICAST_TO_GMAC1_CPU = 0x19, ++ MTK_PPE_CPU_REASON_HIT_PRE_BIND = 0x1a, ++ MTK_PPE_CPU_REASON_PACKET_SAMPLING = 0x1b, ++ MTK_PPE_CPU_REASON_EXCEED_MTU = 0x1c, ++ MTK_PPE_CPU_REASON_PPE_BYPASS = 0x1e, ++ MTK_PPE_CPU_REASON_INVALID = 0x1f, ++}; ++ ++struct mtk_ppe { ++ struct device *dev; ++ void __iomem *base; ++ int version; ++ ++ struct mtk_foe_entry *foe_table; ++ dma_addr_t foe_phys; ++ ++ void *acct_table; ++}; ++ ++int mtk_ppe_init(struct mtk_ppe *ppe, struct device *dev, void __iomem *base, ++ int version); ++int mtk_ppe_start(struct mtk_ppe *ppe); ++int mtk_ppe_stop(struct mtk_ppe *ppe); ++ ++static inline void ++mtk_foe_entry_clear(struct mtk_ppe *ppe, u16 hash) ++{ ++ ppe->foe_table[hash].ib1 = 0; ++ dma_wmb(); ++} ++ ++static inline int ++mtk_foe_entry_timestamp(struct mtk_ppe *ppe, u16 hash) ++{ ++ u32 ib1 = READ_ONCE(ppe->foe_table[hash].ib1); ++ ++ if (FIELD_GET(MTK_FOE_IB1_STATE, ib1) != MTK_FOE_STATE_BIND) ++ return -1; ++ ++ return FIELD_GET(MTK_FOE_IB1_BIND_TIMESTAMP, ib1); ++} ++ ++int mtk_foe_entry_prepare(struct mtk_foe_entry *entry, int type, int l4proto, ++ u8 pse_port, u8 *src_mac, u8 *dest_mac); ++int mtk_foe_entry_set_pse_port(struct mtk_foe_entry *entry, u8 port); ++int mtk_foe_entry_set_ipv4_tuple(struct mtk_foe_entry *entry, bool orig, ++ __be32 src_addr, __be16 src_port, ++ __be32 dest_addr, __be16 dest_port); ++int mtk_foe_entry_set_ipv6_tuple(struct mtk_foe_entry *entry, ++ __be32 *src_addr, __be16 src_port, ++ __be32 *dest_addr, __be16 dest_port); ++int mtk_foe_entry_set_dsa(struct mtk_foe_entry *entry, int port); ++int mtk_foe_entry_set_vlan(struct mtk_foe_entry *entry, int vid); ++int mtk_foe_entry_set_pppoe(struct mtk_foe_entry *entry, int sid); ++int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry, ++ u16 timestamp); ++int mtk_ppe_debugfs_init(struct mtk_ppe *ppe); ++ ++#endif +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c +@@ -0,0 +1,217 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* Copyright (C) 2020 Felix Fietkau */ ++ ++#include ++#include ++#include "mtk_eth_soc.h" ++ ++struct mtk_flow_addr_info ++{ ++ void *src, *dest; ++ u16 *src_port, *dest_port; ++ bool ipv6; ++}; ++ ++static const char *mtk_foe_entry_state_str(int state) ++{ ++ static const char * const state_str[] = { ++ [MTK_FOE_STATE_INVALID] = "INV", ++ [MTK_FOE_STATE_UNBIND] = "UNB", ++ [MTK_FOE_STATE_BIND] = "BND", ++ [MTK_FOE_STATE_FIN] = "FIN", ++ }; ++ ++ if (state >= ARRAY_SIZE(state_str) || !state_str[state]) ++ return "UNK"; ++ ++ return state_str[state]; ++} ++ ++static const char *mtk_foe_pkt_type_str(int type) ++{ ++ static const char * const type_str[] = { ++ [MTK_PPE_PKT_TYPE_IPV4_HNAPT] = "IPv4 5T", ++ [MTK_PPE_PKT_TYPE_IPV4_ROUTE] = "IPv4 3T", ++ [MTK_PPE_PKT_TYPE_BRIDGE] = "L2", ++ [MTK_PPE_PKT_TYPE_IPV4_DSLITE] = "DS-LITE", ++ [MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T] = "IPv6 3T", ++ [MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T] = "IPv6 5T", ++ [MTK_PPE_PKT_TYPE_IPV6_6RD] = "6RD", ++ }; ++ ++ if (type >= ARRAY_SIZE(type_str) || !type_str[type]) ++ return "UNKNOWN"; ++ ++ return type_str[type]; ++} ++ ++static void ++mtk_print_addr(struct seq_file *m, u32 *addr, bool ipv6) ++{ ++ u32 n_addr[4]; ++ int i; ++ ++ if (!ipv6) { ++ seq_printf(m, "%pI4h", addr); ++ return; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(n_addr); i++) ++ n_addr[i] = htonl(addr[i]); ++ seq_printf(m, "%pI6", n_addr); ++} ++ ++static void ++mtk_print_addr_info(struct seq_file *m, struct mtk_flow_addr_info *ai) ++{ ++ mtk_print_addr(m, ai->src, ai->ipv6); ++ if (ai->src_port) ++ seq_printf(m, ":%d", *ai->src_port); ++ seq_printf(m, "->"); ++ mtk_print_addr(m, ai->dest, ai->ipv6); ++ if (ai->dest_port) ++ seq_printf(m, ":%d", *ai->dest_port); ++} ++ ++static int ++mtk_ppe_debugfs_foe_show(struct seq_file *m, void *private, bool bind) ++{ ++ struct mtk_ppe *ppe = m->private; ++ int i, count; ++ ++ for (i = 0, count = 0; i < MTK_PPE_ENTRIES; i++) { ++ struct mtk_foe_entry *entry = &ppe->foe_table[i]; ++ struct mtk_foe_mac_info *l2; ++ struct mtk_flow_addr_info ai = {}; ++ unsigned char h_source[ETH_ALEN]; ++ unsigned char h_dest[ETH_ALEN]; ++ int type, state; ++ u32 ib2; ++ ++ ++ state = FIELD_GET(MTK_FOE_IB1_STATE, entry->ib1); ++ if (!state) ++ continue; ++ ++ if (bind && state != MTK_FOE_STATE_BIND) ++ continue; ++ ++ type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); ++ seq_printf(m, "%05x %s %7s", i, ++ mtk_foe_entry_state_str(state), ++ mtk_foe_pkt_type_str(type)); ++ ++ switch (type) { ++ case MTK_PPE_PKT_TYPE_IPV4_HNAPT: ++ case MTK_PPE_PKT_TYPE_IPV4_DSLITE: ++ ai.src_port = &entry->ipv4.orig.src_port; ++ ai.dest_port = &entry->ipv4.orig.dest_port; ++ fallthrough; ++ case MTK_PPE_PKT_TYPE_IPV4_ROUTE: ++ ai.src = &entry->ipv4.orig.src_ip; ++ ai.dest = &entry->ipv4.orig.dest_ip; ++ break; ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T: ++ ai.src_port = &entry->ipv6.src_port; ++ ai.dest_port = &entry->ipv6.dest_port; ++ fallthrough; ++ case MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T: ++ case MTK_PPE_PKT_TYPE_IPV6_6RD: ++ ai.src = &entry->ipv6.src_ip; ++ ai.dest = &entry->ipv6.dest_ip; ++ ai.ipv6 = true; ++ break; ++ } ++ ++ seq_printf(m, " orig="); ++ mtk_print_addr_info(m, &ai); ++ ++ switch (type) { ++ case MTK_PPE_PKT_TYPE_IPV4_HNAPT: ++ case MTK_PPE_PKT_TYPE_IPV4_DSLITE: ++ ai.src_port = &entry->ipv4.new.src_port; ++ ai.dest_port = &entry->ipv4.new.dest_port; ++ fallthrough; ++ case MTK_PPE_PKT_TYPE_IPV4_ROUTE: ++ ai.src = &entry->ipv4.new.src_ip; ++ ai.dest = &entry->ipv4.new.dest_ip; ++ seq_printf(m, " new="); ++ mtk_print_addr_info(m, &ai); ++ break; ++ } ++ ++ if (type >= MTK_PPE_PKT_TYPE_IPV4_DSLITE) { ++ l2 = &entry->ipv6.l2; ++ ib2 = entry->ipv6.ib2; ++ } else { ++ l2 = &entry->ipv4.l2; ++ ib2 = entry->ipv4.ib2; ++ } ++ ++ *((__be32 *)h_source) = htonl(l2->src_mac_hi); ++ *((__be16 *)&h_source[4]) = htons(l2->src_mac_lo); ++ *((__be32 *)h_dest) = htonl(l2->dest_mac_hi); ++ *((__be16 *)&h_dest[4]) = htons(l2->dest_mac_lo); ++ ++ seq_printf(m, " eth=%pM->%pM etype=%04x" ++ " vlan=%d,%d ib1=%08x ib2=%08x\n", ++ h_source, h_dest, ntohs(l2->etype), ++ l2->vlan1, l2->vlan2, entry->ib1, ib2); ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_ppe_debugfs_foe_show_all(struct seq_file *m, void *private) ++{ ++ return mtk_ppe_debugfs_foe_show(m, private, false); ++} ++ ++static int ++mtk_ppe_debugfs_foe_show_bind(struct seq_file *m, void *private) ++{ ++ return mtk_ppe_debugfs_foe_show(m, private, true); ++} ++ ++static int ++mtk_ppe_debugfs_foe_open_all(struct inode *inode, struct file *file) ++{ ++ return single_open(file, mtk_ppe_debugfs_foe_show_all, ++ inode->i_private); ++} ++ ++static int ++mtk_ppe_debugfs_foe_open_bind(struct inode *inode, struct file *file) ++{ ++ return single_open(file, mtk_ppe_debugfs_foe_show_bind, ++ inode->i_private); ++} ++ ++int mtk_ppe_debugfs_init(struct mtk_ppe *ppe) ++{ ++ static const struct file_operations fops_all = { ++ .open = mtk_ppe_debugfs_foe_open_all, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++ }; ++ ++ static const struct file_operations fops_bind = { ++ .open = mtk_ppe_debugfs_foe_open_bind, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++ }; ++ ++ struct dentry *root; ++ ++ root = debugfs_create_dir("mtk_ppe", NULL); ++ if (!root) ++ return -ENOMEM; ++ ++ debugfs_create_file("entries", S_IRUGO, root, ppe, &fops_all); ++ debugfs_create_file("bind", S_IRUGO, root, ppe, &fops_bind); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h +@@ -0,0 +1,144 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* Copyright (C) 2020 Felix Fietkau */ ++ ++#ifndef __MTK_PPE_REGS_H ++#define __MTK_PPE_REGS_H ++ ++#define MTK_PPE_GLO_CFG 0x200 ++#define MTK_PPE_GLO_CFG_EN BIT(0) ++#define MTK_PPE_GLO_CFG_TSID_EN BIT(1) ++#define MTK_PPE_GLO_CFG_IP4_L4_CS_DROP BIT(2) ++#define MTK_PPE_GLO_CFG_IP4_CS_DROP BIT(3) ++#define MTK_PPE_GLO_CFG_TTL0_DROP BIT(4) ++#define MTK_PPE_GLO_CFG_PPE_BSWAP BIT(5) ++#define MTK_PPE_GLO_CFG_PSE_HASH_OFS BIT(6) ++#define MTK_PPE_GLO_CFG_MCAST_TB_EN BIT(7) ++#define MTK_PPE_GLO_CFG_FLOW_DROP_KA BIT(8) ++#define MTK_PPE_GLO_CFG_FLOW_DROP_UPDATE BIT(9) ++#define MTK_PPE_GLO_CFG_UDP_LITE_EN BIT(10) ++#define MTK_PPE_GLO_CFG_UDP_LEN_DROP BIT(11) ++#define MTK_PPE_GLO_CFG_MCAST_ENTRIES GNEMASK(13, 12) ++#define MTK_PPE_GLO_CFG_BUSY BIT(31) ++ ++#define MTK_PPE_FLOW_CFG 0x204 ++#define MTK_PPE_FLOW_CFG_IP4_TCP_FRAG BIT(6) ++#define MTK_PPE_FLOW_CFG_IP4_UDP_FRAG BIT(7) ++#define MTK_PPE_FLOW_CFG_IP6_3T_ROUTE BIT(8) ++#define MTK_PPE_FLOW_CFG_IP6_5T_ROUTE BIT(9) ++#define MTK_PPE_FLOW_CFG_IP6_6RD BIT(10) ++#define MTK_PPE_FLOW_CFG_IP4_NAT BIT(12) ++#define MTK_PPE_FLOW_CFG_IP4_NAPT BIT(13) ++#define MTK_PPE_FLOW_CFG_IP4_DSLITE BIT(14) ++#define MTK_PPE_FLOW_CFG_L2_BRIDGE BIT(15) ++#define MTK_PPE_FLOW_CFG_IP_PROTO_BLACKLIST BIT(16) ++#define MTK_PPE_FLOW_CFG_IP4_NAT_FRAG BIT(17) ++#define MTK_PPE_FLOW_CFG_IP4_HASH_FLOW_LABEL BIT(18) ++#define MTK_PPE_FLOW_CFG_IP4_HASH_GRE_KEY BIT(19) ++#define MTK_PPE_FLOW_CFG_IP6_HASH_GRE_KEY BIT(20) ++ ++#define MTK_PPE_IP_PROTO_CHK 0x208 ++#define MTK_PPE_IP_PROTO_CHK_IPV4 GENMASK(15, 0) ++#define MTK_PPE_IP_PROTO_CHK_IPV6 GENMASK(31, 16) ++ ++#define MTK_PPE_TB_CFG 0x21c ++#define MTK_PPE_TB_CFG_ENTRY_NUM GENMASK(2, 0) ++#define MTK_PPE_TB_CFG_ENTRY_80B BIT(3) ++#define MTK_PPE_TB_CFG_SEARCH_MISS GENMASK(5, 4) ++#define MTK_PPE_TB_CFG_AGE_PREBIND BIT(6) ++#define MTK_PPE_TB_CFG_AGE_NON_L4 BIT(7) ++#define MTK_PPE_TB_CFG_AGE_UNBIND BIT(8) ++#define MTK_PPE_TB_CFG_AGE_TCP BIT(9) ++#define MTK_PPE_TB_CFG_AGE_UDP BIT(10) ++#define MTK_PPE_TB_CFG_AGE_TCP_FIN BIT(11) ++#define MTK_PPE_TB_CFG_KEEPALIVE GENMASK(13, 12) ++#define MTK_PPE_TB_CFG_HASH_MODE GENMASK(15, 14) ++#define MTK_PPE_TB_CFG_SCAN_MODE GENMASK(17, 16) ++#define MTK_PPE_TB_CFG_HASH_DEBUG GENMASK(19, 18) ++ ++enum { ++ MTK_PPE_SCAN_MODE_DISABLED, ++ MTK_PPE_SCAN_MODE_CHECK_AGE, ++ MTK_PPE_SCAN_MODE_KEEPALIVE_AGE, ++}; ++ ++enum { ++ MTK_PPE_KEEPALIVE_DISABLE, ++ MTK_PPE_KEEPALIVE_UNICAST_CPU, ++ MTK_PPE_KEEPALIVE_DUP_CPU = 3, ++}; ++ ++enum { ++ MTK_PPE_SEARCH_MISS_ACTION_DROP, ++ MTK_PPE_SEARCH_MISS_ACTION_FORWARD = 2, ++ MTK_PPE_SEARCH_MISS_ACTION_FORWARD_BUILD = 3, ++}; ++ ++#define MTK_PPE_TB_BASE 0x220 ++ ++#define MTK_PPE_TB_USED 0x224 ++#define MTK_PPE_TB_USED_NUM GENMASK(13, 0) ++ ++#define MTK_PPE_BIND_RATE 0x228 ++#define MTK_PPE_BIND_RATE_BIND GENMASK(15, 0) ++#define MTK_PPE_BIND_RATE_PREBIND GENMASK(31, 16) ++ ++#define MTK_PPE_BIND_LIMIT0 0x22c ++#define MTK_PPE_BIND_LIMIT0_QUARTER GENMASK(13, 0) ++#define MTK_PPE_BIND_LIMIT0_HALF GENMASK(29, 16) ++ ++#define MTK_PPE_BIND_LIMIT1 0x230 ++#define MTK_PPE_BIND_LIMIT1_FULL GENMASK(13, 0) ++#define MTK_PPE_BIND_LIMIT1_NON_L4 GENMASK(23, 16) ++ ++#define MTK_PPE_KEEPALIVE 0x234 ++#define MTK_PPE_KEEPALIVE_TIME GENMASK(15, 0) ++#define MTK_PPE_KEEPALIVE_TIME_TCP GENMASK(23, 16) ++#define MTK_PPE_KEEPALIVE_TIME_UDP GENMASK(31, 24) ++ ++#define MTK_PPE_UNBIND_AGE 0x238 ++#define MTK_PPE_UNBIND_AGE_MIN_PACKETS GENMASK(31, 16) ++#define MTK_PPE_UNBIND_AGE_DELTA GENMASK(7, 0) ++ ++#define MTK_PPE_BIND_AGE0 0x23c ++#define MTK_PPE_BIND_AGE0_DELTA_NON_L4 GENMASK(30, 16) ++#define MTK_PPE_BIND_AGE0_DELTA_UDP GENMASK(14, 0) ++ ++#define MTK_PPE_BIND_AGE1 0x240 ++#define MTK_PPE_BIND_AGE1_DELTA_TCP_FIN GENMASK(30, 16) ++#define MTK_PPE_BIND_AGE1_DELTA_TCP GENMASK(14, 0) ++ ++#define MTK_PPE_HASH_SEED 0x244 ++ ++#define MTK_PPE_DEFAULT_CPU_PORT 0x248 ++#define MTK_PPE_DEFAULT_CPU_PORT_MASK(_n) (GENMASK(2, 0) << ((_n) * 4)) ++ ++#define MTK_PPE_MTU_DROP 0x308 ++ ++#define MTK_PPE_VLAN_MTU0 0x30c ++#define MTK_PPE_VLAN_MTU0_NONE GENMASK(13, 0) ++#define MTK_PPE_VLAN_MTU0_1TAG GENMASK(29, 16) ++ ++#define MTK_PPE_VLAN_MTU1 0x310 ++#define MTK_PPE_VLAN_MTU1_2TAG GENMASK(13, 0) ++#define MTK_PPE_VLAN_MTU1_3TAG GENMASK(29, 16) ++ ++#define MTK_PPE_VPM_TPID 0x318 ++ ++#define MTK_PPE_CACHE_CTL 0x320 ++#define MTK_PPE_CACHE_CTL_EN BIT(0) ++#define MTK_PPE_CACHE_CTL_LOCK_CLR BIT(4) ++#define MTK_PPE_CACHE_CTL_REQ BIT(8) ++#define MTK_PPE_CACHE_CTL_CLEAR BIT(9) ++#define MTK_PPE_CACHE_CTL_CMD GENMASK(13, 12) ++ ++#define MTK_PPE_MIB_CFG 0x334 ++#define MTK_PPE_MIB_CFG_EN BIT(0) ++#define MTK_PPE_MIB_CFG_RD_CLR BIT(1) ++ ++#define MTK_PPE_MIB_TB_BASE 0x338 ++ ++#define MTK_PPE_MIB_CACHE_CTL 0x350 ++#define MTK_PPE_MIB_CACHE_CTL_EN BIT(0) ++#define MTK_PPE_MIB_CACHE_CTL_FLUSH BIT(2) ++ ++#endif diff --git a/target/linux/generic/backport-5.15/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch b/target/linux/generic/backport-5.15/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch new file mode 100644 index 0000000000..599757d413 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch @@ -0,0 +1,568 @@ +From: Felix Fietkau +Date: Wed, 24 Mar 2021 02:30:54 +0100 +Subject: [PATCH] net: ethernet: mtk_eth_soc: add flow offloading support + +This adds support for offloading IPv4 routed flows, including SNAT/DNAT, +one VLAN, PPPoE and DSA. + +Signed-off-by: Felix Fietkau +Signed-off-by: Pablo Neira Ayuso +--- + create mode 100644 drivers/net/ethernet/mediatek/mtk_ppe_offload.c + +--- a/drivers/net/ethernet/mediatek/Makefile ++++ b/drivers/net/ethernet/mediatek/Makefile +@@ -4,5 +4,5 @@ + # + + obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o +-mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o ++mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o + obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2834,6 +2834,7 @@ static const struct net_device_ops mtk_n + #ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = mtk_poll_controller, + #endif ++ .ndo_setup_tc = mtk_eth_setup_tc, + }; + + static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) +@@ -3092,6 +3093,10 @@ static int mtk_probe(struct platform_dev + eth->base + MTK_ETH_PPE_BASE, 2); + if (err) + goto err_free_dev; ++ ++ err = mtk_eth_offload_init(eth); ++ if (err) ++ goto err_free_dev; + } + + for (i = 0; i < MTK_MAX_DEVS; i++) { +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include "mtk_ppe.h" + + #define MTK_QDMA_PAGE_SIZE 2048 +@@ -40,7 +41,8 @@ + NETIF_F_HW_VLAN_CTAG_RX | \ + NETIF_F_SG | NETIF_F_TSO | \ + NETIF_F_TSO6 | \ +- NETIF_F_IPV6_CSUM) ++ NETIF_F_IPV6_CSUM |\ ++ NETIF_F_HW_TC) + #define MTK_HW_FEATURES_MT7628 (NETIF_F_SG | NETIF_F_RXCSUM) + #define NEXT_DESP_IDX(X, Y) (((X) + 1) & ((Y) - 1)) + +@@ -929,6 +931,7 @@ struct mtk_eth { + int ip_align; + + struct mtk_ppe ppe; ++ struct rhashtable flow_table; + }; + + /* struct mtk_mac - the structure that holds the info about the MACs of the +@@ -973,4 +976,9 @@ int mtk_gmac_sgmii_path_setup(struct mtk + int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id); + int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id); + ++int mtk_eth_offload_init(struct mtk_eth *eth); ++int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type, ++ void *type_data); ++ ++ + #endif /* MTK_ETH_H */ +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -0,0 +1,485 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (C) 2020 Felix Fietkau ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "mtk_eth_soc.h" ++ ++struct mtk_flow_data { ++ struct ethhdr eth; ++ ++ union { ++ struct { ++ __be32 src_addr; ++ __be32 dst_addr; ++ } v4; ++ }; ++ ++ __be16 src_port; ++ __be16 dst_port; ++ ++ struct { ++ u16 id; ++ __be16 proto; ++ u8 num; ++ } vlan; ++ struct { ++ u16 sid; ++ u8 num; ++ } pppoe; ++}; ++ ++struct mtk_flow_entry { ++ struct rhash_head node; ++ unsigned long cookie; ++ u16 hash; ++}; ++ ++static const struct rhashtable_params mtk_flow_ht_params = { ++ .head_offset = offsetof(struct mtk_flow_entry, node), ++ .head_offset = offsetof(struct mtk_flow_entry, cookie), ++ .key_len = sizeof(unsigned long), ++ .automatic_shrinking = true, ++}; ++ ++static u32 ++mtk_eth_timestamp(struct mtk_eth *eth) ++{ ++ return mtk_r32(eth, 0x0010) & MTK_FOE_IB1_BIND_TIMESTAMP; ++} ++ ++static int ++mtk_flow_set_ipv4_addr(struct mtk_foe_entry *foe, struct mtk_flow_data *data, ++ bool egress) ++{ ++ return mtk_foe_entry_set_ipv4_tuple(foe, egress, ++ data->v4.src_addr, data->src_port, ++ data->v4.dst_addr, data->dst_port); ++} ++ ++static void ++mtk_flow_offload_mangle_eth(const struct flow_action_entry *act, void *eth) ++{ ++ void *dest = eth + act->mangle.offset; ++ const void *src = &act->mangle.val; ++ ++ if (act->mangle.offset > 8) ++ return; ++ ++ if (act->mangle.mask == 0xffff) { ++ src += 2; ++ dest += 2; ++ } ++ ++ memcpy(dest, src, act->mangle.mask ? 2 : 4); ++} ++ ++ ++static int ++mtk_flow_mangle_ports(const struct flow_action_entry *act, ++ struct mtk_flow_data *data) ++{ ++ u32 val = ntohl(act->mangle.val); ++ ++ switch (act->mangle.offset) { ++ case 0: ++ if (act->mangle.mask == ~htonl(0xffff)) ++ data->dst_port = cpu_to_be16(val); ++ else ++ data->src_port = cpu_to_be16(val >> 16); ++ break; ++ case 2: ++ data->dst_port = cpu_to_be16(val); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_flow_mangle_ipv4(const struct flow_action_entry *act, ++ struct mtk_flow_data *data) ++{ ++ __be32 *dest; ++ ++ switch (act->mangle.offset) { ++ case offsetof(struct iphdr, saddr): ++ dest = &data->v4.src_addr; ++ break; ++ case offsetof(struct iphdr, daddr): ++ dest = &data->v4.dst_addr; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ memcpy(dest, &act->mangle.val, sizeof(u32)); ++ ++ return 0; ++} ++ ++static int ++mtk_flow_get_dsa_port(struct net_device **dev) ++{ ++#if IS_ENABLED(CONFIG_NET_DSA) ++ struct dsa_port *dp; ++ ++ dp = dsa_port_from_netdev(*dev); ++ if (IS_ERR(dp)) ++ return -ENODEV; ++ ++ if (dp->cpu_dp->tag_ops->proto != DSA_TAG_PROTO_MTK) ++ return -ENODEV; ++ ++ *dev = dp->cpu_dp->master; ++ ++ return dp->index; ++#else ++ return -ENODEV; ++#endif ++} ++ ++static int ++mtk_flow_set_output_device(struct mtk_eth *eth, struct mtk_foe_entry *foe, ++ struct net_device *dev) ++{ ++ int pse_port, dsa_port; ++ ++ dsa_port = mtk_flow_get_dsa_port(&dev); ++ if (dsa_port >= 0) ++ mtk_foe_entry_set_dsa(foe, dsa_port); ++ ++ if (dev == eth->netdev[0]) ++ pse_port = 1; ++ else if (dev == eth->netdev[1]) ++ pse_port = 2; ++ else ++ return -EOPNOTSUPP; ++ ++ mtk_foe_entry_set_pse_port(foe, pse_port); ++ ++ return 0; ++} ++ ++static int ++mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f) ++{ ++ struct flow_rule *rule = flow_cls_offload_flow_rule(f); ++ struct flow_action_entry *act; ++ struct mtk_flow_data data = {}; ++ struct mtk_foe_entry foe; ++ struct net_device *odev = NULL; ++ struct mtk_flow_entry *entry; ++ int offload_type = 0; ++ u16 addr_type = 0; ++ u32 timestamp; ++ u8 l4proto = 0; ++ int err = 0; ++ int hash; ++ int i; ++ ++ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) { ++ struct flow_match_meta match; ++ ++ flow_rule_match_meta(rule, &match); ++ } else { ++ return -EOPNOTSUPP; ++ } ++ ++ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CONTROL)) { ++ struct flow_match_control match; ++ ++ flow_rule_match_control(rule, &match); ++ addr_type = match.key->addr_type; ++ } else { ++ return -EOPNOTSUPP; ++ } ++ ++ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { ++ struct flow_match_basic match; ++ ++ flow_rule_match_basic(rule, &match); ++ l4proto = match.key->ip_proto; ++ } else { ++ return -EOPNOTSUPP; ++ } ++ ++ flow_action_for_each(i, act, &rule->action) { ++ switch (act->id) { ++ case FLOW_ACTION_MANGLE: ++ if (act->mangle.htype == FLOW_ACT_MANGLE_HDR_TYPE_ETH) ++ mtk_flow_offload_mangle_eth(act, &data.eth); ++ break; ++ case FLOW_ACTION_REDIRECT: ++ odev = act->dev; ++ break; ++ case FLOW_ACTION_CSUM: ++ break; ++ case FLOW_ACTION_VLAN_PUSH: ++ if (data.vlan.num == 1 || ++ act->vlan.proto != htons(ETH_P_8021Q)) ++ return -EOPNOTSUPP; ++ ++ data.vlan.id = act->vlan.vid; ++ data.vlan.proto = act->vlan.proto; ++ data.vlan.num++; ++ break; ++ case FLOW_ACTION_PPPOE_PUSH: ++ if (data.pppoe.num == 1) ++ return -EOPNOTSUPP; ++ ++ data.pppoe.sid = act->pppoe.sid; ++ data.pppoe.num++; ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } ++ } ++ ++ switch (addr_type) { ++ case FLOW_DISSECTOR_KEY_IPV4_ADDRS: ++ offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT; ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ if (!is_valid_ether_addr(data.eth.h_source) || ++ !is_valid_ether_addr(data.eth.h_dest)) ++ return -EINVAL; ++ ++ err = mtk_foe_entry_prepare(&foe, offload_type, l4proto, 0, ++ data.eth.h_source, ++ data.eth.h_dest); ++ if (err) ++ return err; ++ ++ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) { ++ struct flow_match_ports ports; ++ ++ flow_rule_match_ports(rule, &ports); ++ data.src_port = ports.key->src; ++ data.dst_port = ports.key->dst; ++ } else { ++ return -EOPNOTSUPP; ++ } ++ ++ if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) { ++ struct flow_match_ipv4_addrs addrs; ++ ++ flow_rule_match_ipv4_addrs(rule, &addrs); ++ ++ data.v4.src_addr = addrs.key->src; ++ data.v4.dst_addr = addrs.key->dst; ++ ++ mtk_flow_set_ipv4_addr(&foe, &data, false); ++ } ++ ++ flow_action_for_each(i, act, &rule->action) { ++ if (act->id != FLOW_ACTION_MANGLE) ++ continue; ++ ++ switch (act->mangle.htype) { ++ case FLOW_ACT_MANGLE_HDR_TYPE_TCP: ++ case FLOW_ACT_MANGLE_HDR_TYPE_UDP: ++ err = mtk_flow_mangle_ports(act, &data); ++ break; ++ case FLOW_ACT_MANGLE_HDR_TYPE_IP4: ++ err = mtk_flow_mangle_ipv4(act, &data); ++ break; ++ case FLOW_ACT_MANGLE_HDR_TYPE_ETH: ++ /* handled earlier */ ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ if (err) ++ return err; ++ } ++ ++ if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) { ++ err = mtk_flow_set_ipv4_addr(&foe, &data, true); ++ if (err) ++ return err; ++ } ++ ++ if (data.vlan.num == 1) { ++ if (data.vlan.proto != htons(ETH_P_8021Q)) ++ return -EOPNOTSUPP; ++ ++ mtk_foe_entry_set_vlan(&foe, data.vlan.id); ++ } ++ if (data.pppoe.num == 1) ++ mtk_foe_entry_set_pppoe(&foe, data.pppoe.sid); ++ ++ err = mtk_flow_set_output_device(eth, &foe, odev); ++ if (err) ++ return err; ++ ++ entry = kzalloc(sizeof(*entry), GFP_KERNEL); ++ if (!entry) ++ return -ENOMEM; ++ ++ entry->cookie = f->cookie; ++ timestamp = mtk_eth_timestamp(eth); ++ hash = mtk_foe_entry_commit(ð->ppe, &foe, timestamp); ++ if (hash < 0) { ++ err = hash; ++ goto free; ++ } ++ ++ entry->hash = hash; ++ err = rhashtable_insert_fast(ð->flow_table, &entry->node, ++ mtk_flow_ht_params); ++ if (err < 0) ++ goto clear_flow; ++ ++ return 0; ++clear_flow: ++ mtk_foe_entry_clear(ð->ppe, hash); ++free: ++ kfree(entry); ++ return err; ++} ++ ++static int ++mtk_flow_offload_destroy(struct mtk_eth *eth, struct flow_cls_offload *f) ++{ ++ struct mtk_flow_entry *entry; ++ ++ entry = rhashtable_lookup(ð->flow_table, &f->cookie, ++ mtk_flow_ht_params); ++ if (!entry) ++ return -ENOENT; ++ ++ mtk_foe_entry_clear(ð->ppe, entry->hash); ++ rhashtable_remove_fast(ð->flow_table, &entry->node, ++ mtk_flow_ht_params); ++ kfree(entry); ++ ++ return 0; ++} ++ ++static int ++mtk_flow_offload_stats(struct mtk_eth *eth, struct flow_cls_offload *f) ++{ ++ struct mtk_flow_entry *entry; ++ int timestamp; ++ u32 idle; ++ ++ entry = rhashtable_lookup(ð->flow_table, &f->cookie, ++ mtk_flow_ht_params); ++ if (!entry) ++ return -ENOENT; ++ ++ timestamp = mtk_foe_entry_timestamp(ð->ppe, entry->hash); ++ if (timestamp < 0) ++ return -ETIMEDOUT; ++ ++ idle = mtk_eth_timestamp(eth) - timestamp; ++ f->stats.lastused = jiffies - idle * HZ; ++ ++ return 0; ++} ++ ++static int ++mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv) ++{ ++ struct flow_cls_offload *cls = type_data; ++ struct net_device *dev = cb_priv; ++ struct mtk_mac *mac = netdev_priv(dev); ++ struct mtk_eth *eth = mac->hw; ++ ++ if (!tc_can_offload(dev)) ++ return -EOPNOTSUPP; ++ ++ if (type != TC_SETUP_CLSFLOWER) ++ return -EOPNOTSUPP; ++ ++ switch (cls->command) { ++ case FLOW_CLS_REPLACE: ++ return mtk_flow_offload_replace(eth, cls); ++ case FLOW_CLS_DESTROY: ++ return mtk_flow_offload_destroy(eth, cls); ++ case FLOW_CLS_STATS: ++ return mtk_flow_offload_stats(eth, cls); ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_eth_setup_tc_block(struct net_device *dev, struct flow_block_offload *f) ++{ ++ struct mtk_mac *mac = netdev_priv(dev); ++ struct mtk_eth *eth = mac->hw; ++ static LIST_HEAD(block_cb_list); ++ struct flow_block_cb *block_cb; ++ flow_setup_cb_t *cb; ++ ++ if (!eth->ppe.foe_table) ++ return -EOPNOTSUPP; ++ ++ if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS) ++ return -EOPNOTSUPP; ++ ++ cb = mtk_eth_setup_tc_block_cb; ++ f->driver_block_list = &block_cb_list; ++ ++ switch (f->command) { ++ case FLOW_BLOCK_BIND: ++ block_cb = flow_block_cb_lookup(f->block, cb, dev); ++ if (block_cb) { ++ flow_block_cb_incref(block_cb); ++ return 0; ++ } ++ block_cb = flow_block_cb_alloc(cb, dev, dev, NULL); ++ if (IS_ERR(block_cb)) ++ return PTR_ERR(block_cb); ++ ++ flow_block_cb_add(block_cb, f); ++ list_add_tail(&block_cb->driver_list, &block_cb_list); ++ return 0; ++ case FLOW_BLOCK_UNBIND: ++ block_cb = flow_block_cb_lookup(f->block, cb, dev); ++ if (!block_cb) ++ return -ENOENT; ++ ++ if (flow_block_cb_decref(block_cb)) { ++ flow_block_cb_remove(block_cb, f); ++ list_del(&block_cb->driver_list); ++ } ++ return 0; ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type, ++ void *type_data) ++{ ++ if (type == TC_SETUP_FT) ++ return mtk_eth_setup_tc_block(dev, type_data); ++ ++ return -EOPNOTSUPP; ++} ++ ++int mtk_eth_offload_init(struct mtk_eth *eth) ++{ ++ if (!eth->ppe.foe_table) ++ return 0; ++ ++ return rhashtable_init(ð->flow_table, &mtk_flow_ht_params); ++} diff --git a/target/linux/generic/backport-5.15/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch b/target/linux/generic/backport-5.15/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch new file mode 100644 index 0000000000..2cea1ebe24 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-34-docs-nf_flowtable-update-documentation-with-enhancem.patch @@ -0,0 +1,236 @@ +From: Pablo Neira Ayuso +Date: Wed, 24 Mar 2021 02:30:55 +0100 +Subject: [PATCH] docs: nf_flowtable: update documentation with + enhancements + +This patch updates the flowtable documentation to describe recent +enhancements: + +- Offload action is available after the first packets go through the + classic forwarding path. +- IPv4 and IPv6 are supported. Only TCP and UDP layer 4 are supported at + this stage. +- Tuple has been augmented to track VLAN id and PPPoE session id. +- Bridge and IP forwarding integration, including bridge VLAN filtering + support. +- Hardware offload support. +- Describe the [OFFLOAD] and [HW_OFFLOAD] tags in the conntrack table + listing. +- Replace 'flow offload' by 'flow add' in example rulesets (preferred + syntax). +- Describe existing cache limitations. + +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/Documentation/networking/nf_flowtable.rst ++++ b/Documentation/networking/nf_flowtable.rst +@@ -4,35 +4,38 @@ + Netfilter's flowtable infrastructure + ==================================== + +-This documentation describes the software flowtable infrastructure available in +-Netfilter since Linux kernel 4.16. ++This documentation describes the Netfilter flowtable infrastructure which allows ++you to define a fastpath through the flowtable datapath. This infrastructure ++also provides hardware offload support. The flowtable supports for the layer 3 ++IPv4 and IPv6 and the layer 4 TCP and UDP protocols. + + Overview + -------- + +-Initial packets follow the classic forwarding path, once the flow enters the +-established state according to the conntrack semantics (ie. we have seen traffic +-in both directions), then you can decide to offload the flow to the flowtable +-from the forward chain via the 'flow offload' action available in nftables. +- +-Packets that find an entry in the flowtable (ie. flowtable hit) are sent to the +-output netdevice via neigh_xmit(), hence, they bypass the classic forwarding +-path (the visible effect is that you do not see these packets from any of the +-netfilter hooks coming after the ingress). In case of flowtable miss, the packet +-follows the classic forward path. +- +-The flowtable uses a resizable hashtable, lookups are based on the following +-7-tuple selectors: source, destination, layer 3 and layer 4 protocols, source +-and destination ports and the input interface (useful in case there are several +-conntrack zones in place). +- +-Flowtables are populated via the 'flow offload' nftables action, so the user can +-selectively specify what flows are placed into the flow table. Hence, packets +-follow the classic forwarding path unless the user explicitly instruct packets +-to use this new alternative forwarding path via nftables policy. ++Once the first packet of the flow successfully goes through the IP forwarding ++path, from the second packet on, you might decide to offload the flow to the ++flowtable through your ruleset. The flowtable infrastructure provides a rule ++action that allows you to specify when to add a flow to the flowtable. ++ ++A packet that finds a matching entry in the flowtable (ie. flowtable hit) is ++transmitted to the output netdevice via neigh_xmit(), hence, packets bypass the ++classic IP forwarding path (the visible effect is that you do not see these ++packets from any of the Netfilter hooks coming after ingress). In case that ++there is no matching entry in the flowtable (ie. flowtable miss), the packet ++follows the classic IP forwarding path. ++ ++The flowtable uses a resizable hashtable. Lookups are based on the following ++n-tuple selectors: layer 2 protocol encapsulation (VLAN and PPPoE), layer 3 ++source and destination, layer 4 source and destination ports and the input ++interface (useful in case there are several conntrack zones in place). ++ ++The 'flow add' action allows you to populate the flowtable, the user selectively ++specifies what flows are placed into the flowtable. Hence, packets follow the ++classic IP forwarding path unless the user explicitly instruct flows to use this ++new alternative forwarding path via policy. + +-This is represented in Fig.1, which describes the classic forwarding path +-including the Netfilter hooks and the flowtable fastpath bypass. ++The flowtable datapath is represented in Fig.1, which describes the classic IP ++forwarding path including the Netfilter hooks and the flowtable fastpath bypass. + + :: + +@@ -67,11 +70,13 @@ including the Netfilter hooks and the fl + Fig.1 Netfilter hooks and flowtable interactions + + The flowtable entry also stores the NAT configuration, so all packets are +-mangled according to the NAT policy that matches the initial packets that went +-through the classic forwarding path. The TTL is decremented before calling +-neigh_xmit(). Fragmented traffic is passed up to follow the classic forwarding +-path given that the transport selectors are missing, therefore flowtable lookup +-is not possible. ++mangled according to the NAT policy that is specified from the classic IP ++forwarding path. The TTL is decremented before calling neigh_xmit(). Fragmented ++traffic is passed up to follow the classic IP forwarding path given that the ++transport header is missing, in this case, flowtable lookups are not possible. ++TCP RST and FIN packets are also passed up to the classic IP forwarding path to ++release the flow gracefully. Packets that exceed the MTU are also passed up to ++the classic forwarding path to report packet-too-big ICMP errors to the sender. + + Example configuration + --------------------- +@@ -85,7 +90,7 @@ flowtable and add one rule to your forwa + } + chain y { + type filter hook forward priority 0; policy accept; +- ip protocol tcp flow offload @f ++ ip protocol tcp flow add @f + counter packets 0 bytes 0 + } + } +@@ -103,6 +108,117 @@ flow is offloaded, you will observe that + does not get updated for the packets that are being forwarded through the + forwarding bypass. + ++You can identify offloaded flows through the [OFFLOAD] tag when listing your ++connection tracking table. ++ ++:: ++ # conntrack -L ++ tcp 6 src=10.141.10.2 dst=192.168.10.2 sport=52728 dport=5201 src=192.168.10.2 dst=192.168.10.1 sport=5201 dport=52728 [OFFLOAD] mark=0 use=2 ++ ++ ++Layer 2 encapsulation ++--------------------- ++ ++Since Linux kernel 5.13, the flowtable infrastructure discovers the real ++netdevice behind VLAN and PPPoE netdevices. The flowtable software datapath ++parses the VLAN and PPPoE layer 2 headers to extract the ethertype and the ++VLAN ID / PPPoE session ID which are used for the flowtable lookups. The ++flowtable datapath also deals with layer 2 decapsulation. ++ ++You do not need to add the PPPoE and the VLAN devices to your flowtable, ++instead the real device is sufficient for the flowtable to track your flows. ++ ++Bridge and IP forwarding ++------------------------ ++ ++Since Linux kernel 5.13, you can add bridge ports to the flowtable. The ++flowtable infrastructure discovers the topology behind the bridge device. This ++allows the flowtable to define a fastpath bypass between the bridge ports ++(represented as eth1 and eth2 in the example figure below) and the gateway ++device (represented as eth0) in your switch/router. ++ ++:: ++ fastpath bypass ++ .-------------------------. ++ / \ ++ | IP forwarding | ++ | / \ \/ ++ | br0 eth0 ..... eth0 ++ . / \ *host B* ++ -> eth1 eth2 ++ . *switch/router* ++ . ++ . ++ eth0 ++ *host A* ++ ++The flowtable infrastructure also supports for bridge VLAN filtering actions ++such as PVID and untagged. You can also stack a classic VLAN device on top of ++your bridge port. ++ ++If you would like that your flowtable defines a fastpath between your bridge ++ports and your IP forwarding path, you have to add your bridge ports (as ++represented by the real netdevice) to your flowtable definition. ++ ++Counters ++-------- ++ ++The flowtable can synchronize packet and byte counters with the existing ++connection tracking entry by specifying the counter statement in your flowtable ++definition, e.g. ++ ++:: ++ table inet x { ++ flowtable f { ++ hook ingress priority 0; devices = { eth0, eth1 }; ++ counter ++ } ++ ... ++ } ++ ++Counter support is available since Linux kernel 5.7. ++ ++Hardware offload ++---------------- ++ ++If your network device provides hardware offload support, you can turn it on by ++means of the 'offload' flag in your flowtable definition, e.g. ++ ++:: ++ table inet x { ++ flowtable f { ++ hook ingress priority 0; devices = { eth0, eth1 }; ++ flags offload; ++ } ++ ... ++ } ++ ++There is a workqueue that adds the flows to the hardware. Note that a few ++packets might still run over the flowtable software path until the workqueue has ++a chance to offload the flow to the network device. ++ ++You can identify hardware offloaded flows through the [HW_OFFLOAD] tag when ++listing your connection tracking table. Please, note that the [OFFLOAD] tag ++refers to the software offload mode, so there is a distinction between [OFFLOAD] ++which refers to the software flowtable fastpath and [HW_OFFLOAD] which refers ++to the hardware offload datapath being used by the flow. ++ ++The flowtable hardware offload infrastructure also supports for the DSA ++(Distributed Switch Architecture). ++ ++Limitations ++----------- ++ ++The flowtable behaves like a cache. The flowtable entries might get stale if ++either the destination MAC address or the egress netdevice that is used for ++transmission changes. ++ ++This might be a problem if: ++ ++- You run the flowtable in software mode and you combine bridge and IP ++ forwarding in your setup. ++- Hardware offload is enabled. ++ + More reading + ------------ + diff --git a/target/linux/generic/backport-5.15/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch b/target/linux/generic/backport-5.15/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch new file mode 100644 index 0000000000..66cd053cd1 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-35-net-ethernet-mediatek-ppe-fix-busy-wait-loop.patch @@ -0,0 +1,72 @@ +From c5d66587b8900201e1530b7c18d41e87bd5812f4 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Thu, 15 Apr 2021 17:37:48 -0700 +Subject: [PATCH] net: ethernet: mediatek: ppe: fix busy wait loop + +The intention is for the loop to timeout if the body does not succeed. +The current logic calls time_is_before_jiffies(timeout) which is false +until after the timeout, so the loop body never executes. + +Fix by using readl_poll_timeout as a more standard and less error-prone +solution. + +Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") +Signed-off-by: Ilya Lipnitskiy +Cc: Felix Fietkau +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_ppe.c | 20 +++++++++----------- + drivers/net/ethernet/mediatek/mtk_ppe.h | 1 + + 2 files changed, 10 insertions(+), 11 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_ppe.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe.c +@@ -2,9 +2,8 @@ + /* Copyright (C) 2020 Felix Fietkau */ + + #include +-#include +-#include + #include ++#include + #include + #include + #include "mtk_ppe.h" +@@ -44,18 +43,17 @@ static u32 ppe_clear(struct mtk_ppe *ppe + + static int mtk_ppe_wait_busy(struct mtk_ppe *ppe) + { +- unsigned long timeout = jiffies + HZ; +- +- while (time_is_before_jiffies(timeout)) { +- if (!(ppe_r32(ppe, MTK_PPE_GLO_CFG) & MTK_PPE_GLO_CFG_BUSY)) +- return 0; ++ int ret; ++ u32 val; + +- usleep_range(10, 20); +- } ++ ret = readl_poll_timeout(ppe->base + MTK_PPE_GLO_CFG, val, ++ !(val & MTK_PPE_GLO_CFG_BUSY), ++ 20, MTK_PPE_WAIT_TIMEOUT_US); + +- dev_err(ppe->dev, "PPE table busy"); ++ if (ret) ++ dev_err(ppe->dev, "PPE table busy"); + +- return -ETIMEDOUT; ++ return ret; + } + + static void mtk_ppe_cache_clear(struct mtk_ppe *ppe) +--- a/drivers/net/ethernet/mediatek/mtk_ppe.h ++++ b/drivers/net/ethernet/mediatek/mtk_ppe.h +@@ -12,6 +12,7 @@ + #define MTK_PPE_ENTRIES_SHIFT 3 + #define MTK_PPE_ENTRIES (1024 << MTK_PPE_ENTRIES_SHIFT) + #define MTK_PPE_HASH_MASK (MTK_PPE_ENTRIES - 1) ++#define MTK_PPE_WAIT_TIMEOUT_US 1000000 + + #define MTK_FOE_IB1_UNBIND_TIMESTAMP GENMASK(7, 0) + #define MTK_FOE_IB1_UNBIND_PACKETS GENMASK(23, 8) diff --git a/target/linux/generic/backport-5.15/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch b/target/linux/generic/backport-5.15/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch new file mode 100644 index 0000000000..de376bf78d --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-36-net-ethernet-mediatek-fix-a-typo-bug-in-flow-offload.patch @@ -0,0 +1,29 @@ +From 6ecaf81d4ac6365f9284f9d68d74f7c209e74f98 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Sat, 17 Apr 2021 15:29:04 +0800 +Subject: [PATCH] net: ethernet: mediatek: fix a typo bug in flow offloading + +Issue was traffic problems after a while with increased ping times if +flow offload is active. It turns out that key_offset with cookie is +needed in rhashtable_params but was re-assigned to head_offset. +Fix the assignment. + +Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") +Signed-off-by: DENG Qingfang +Tested-by: Frank Wunderlich +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -44,7 +44,7 @@ struct mtk_flow_entry { + + static const struct rhashtable_params mtk_flow_ht_params = { + .head_offset = offsetof(struct mtk_flow_entry, node), +- .head_offset = offsetof(struct mtk_flow_entry, cookie), ++ .key_offset = offsetof(struct mtk_flow_entry, cookie), + .key_len = sizeof(unsigned long), + .automatic_shrinking = true, + }; diff --git a/target/linux/generic/backport-5.15/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch b/target/linux/generic/backport-5.15/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch new file mode 100644 index 0000000000..e99302ecda --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-38-net-ethernet-mtk_eth_soc-unmap-RX-data-before-callin.patch @@ -0,0 +1,38 @@ +From 5196c417854942e218a59ec87bf7d414b3bd581e Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:20:55 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: unmap RX data before calling + build_skb + +Since build_skb accesses the data area (for initializing shinfo), dma unmap +needs to happen before that call + +Signed-off-by: Felix Fietkau +[Ilya: split build_skb cleanup fix into a separate commit] +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1319,6 +1319,9 @@ static int mtk_poll_rx(struct napi_struc + goto release_desc; + } + ++ dma_unmap_single(eth->dev, trxd.rxd1, ++ ring->buf_size, DMA_FROM_DEVICE); ++ + /* receive data */ + skb = build_skb(data, ring->frag_size); + if (unlikely(!skb)) { +@@ -1328,8 +1331,6 @@ static int mtk_poll_rx(struct napi_struc + } + skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); + +- dma_unmap_single(eth->dev, trxd.rxd1, +- ring->buf_size, DMA_FROM_DEVICE); + pktlen = RX_DMA_GET_PLEN0(trxd.rxd2); + skb->dev = netdev; + skb_put(skb, pktlen); diff --git a/target/linux/generic/backport-5.15/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch b/target/linux/generic/backport-5.15/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch new file mode 100644 index 0000000000..a82518882a --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-39-net-ethernet-mtk_eth_soc-fix-build_skb-cleanup.patch @@ -0,0 +1,38 @@ +From 787082ab9f7be4711e52f67c388535eda74a1269 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Thu, 22 Apr 2021 22:20:56 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: fix build_skb cleanup + +In case build_skb fails, call skb_free_frag on the correct pointer. Also +update the DMA structures with the new mapping before exiting, because +the mapping was successful + +Suggested-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1325,9 +1325,9 @@ static int mtk_poll_rx(struct napi_struc + /* receive data */ + skb = build_skb(data, ring->frag_size); + if (unlikely(!skb)) { +- skb_free_frag(new_data); ++ skb_free_frag(data); + netdev->stats.rx_dropped++; +- goto release_desc; ++ goto skip_rx; + } + skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); + +@@ -1347,6 +1347,7 @@ static int mtk_poll_rx(struct napi_struc + skb_record_rx_queue(skb, 0); + napi_gro_receive(napi, skb); + ++skip_rx: + ring->data[idx] = new_data; + rxd->rxd1 = (unsigned int)dma_addr; + diff --git a/target/linux/generic/backport-5.15/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch b/target/linux/generic/backport-5.15/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch new file mode 100644 index 0000000000..5972b9afa7 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-40-net-ethernet-mtk_eth_soc-use-napi_consume_skb.patch @@ -0,0 +1,77 @@ +From c30c4a82739090a2de4a4e3f245355ea4fb3ec14 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:20:57 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: use napi_consume_skb + +Should improve performance, since it can use bulk free + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 19 ++++++++++++------- + 1 file changed, 12 insertions(+), 7 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -879,7 +879,8 @@ static int txd_to_idx(struct mtk_tx_ring + return ((void *)dma - (void *)ring->dma) / sizeof(*dma); + } + +-static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf) ++static void mtk_tx_unmap(struct mtk_eth *eth, struct mtk_tx_buf *tx_buf, ++ bool napi) + { + if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) { + if (tx_buf->flags & MTK_TX_FLAGS_SINGLE0) { +@@ -911,8 +912,12 @@ static void mtk_tx_unmap(struct mtk_eth + + tx_buf->flags = 0; + if (tx_buf->skb && +- (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC)) +- dev_kfree_skb_any(tx_buf->skb); ++ (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC)) { ++ if (napi) ++ napi_consume_skb(tx_buf->skb, napi); ++ else ++ dev_kfree_skb_any(tx_buf->skb); ++ } + tx_buf->skb = NULL; + } + +@@ -1090,7 +1095,7 @@ err_dma: + tx_buf = mtk_desc_to_tx_buf(ring, itxd); + + /* unmap dma */ +- mtk_tx_unmap(eth, tx_buf); ++ mtk_tx_unmap(eth, tx_buf, false); + + itxd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU; + if (!MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) +@@ -1409,7 +1414,7 @@ static int mtk_poll_tx_qdma(struct mtk_e + done[mac]++; + budget--; + } +- mtk_tx_unmap(eth, tx_buf); ++ mtk_tx_unmap(eth, tx_buf, true); + + ring->last_free = desc; + atomic_inc(&ring->free_count); +@@ -1446,7 +1451,7 @@ static int mtk_poll_tx_pdma(struct mtk_e + budget--; + } + +- mtk_tx_unmap(eth, tx_buf); ++ mtk_tx_unmap(eth, tx_buf, true); + + desc = &ring->dma[cpu]; + ring->last_free = desc; +@@ -1648,7 +1653,7 @@ static void mtk_tx_clean(struct mtk_eth + + if (ring->buf) { + for (i = 0; i < MTK_DMA_SIZE; i++) +- mtk_tx_unmap(eth, &ring->buf[i]); ++ mtk_tx_unmap(eth, &ring->buf[i], false); + kfree(ring->buf); + ring->buf = NULL; + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch b/target/linux/generic/backport-5.15/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch new file mode 100644 index 0000000000..7ebc3fa903 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-41-net-ethernet-mtk_eth_soc-reduce-MDIO-bus-access-late.patch @@ -0,0 +1,30 @@ +From 3630d519d7c3eab92567658690e44ffe0517d109 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:20:58 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: reduce MDIO bus access latency + +usleep_range often ends up sleeping much longer than the 10-20us provided +as a range here. This causes significant latency in mdio bus acceses, +which easily adds multiple seconds to the boot time on MT7621 when polling +DSA slave ports. +Use cond_resched instead of usleep_range, since the MDIO access does not +take much time + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -86,7 +86,7 @@ static int mtk_mdio_busy_wait(struct mtk + return 0; + if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT)) + break; +- usleep_range(10, 20); ++ cond_resched(); + } + + dev_err(eth->dev, "mdio: MDIO timeout\n"); diff --git a/target/linux/generic/backport-5.15/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch b/target/linux/generic/backport-5.15/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch new file mode 100644 index 0000000000..56d4a82824 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-42-net-ethernet-mtk_eth_soc-remove-unnecessary-TX-queue.patch @@ -0,0 +1,54 @@ +From 16ef670789b252b221700adc413497ed2f941d8a Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:20:59 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: remove unnecessary TX queue stops + +When running short on descriptors, only stop the queue for the netdev that +tx was attempted for. By the time something tries to send on the other +netdev, the ring might have some more room already. + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 15 ++------------- + 1 file changed, 2 insertions(+), 13 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1152,17 +1152,6 @@ static void mtk_wake_queue(struct mtk_et + } + } + +-static void mtk_stop_queue(struct mtk_eth *eth) +-{ +- int i; +- +- for (i = 0; i < MTK_MAC_COUNT; i++) { +- if (!eth->netdev[i]) +- continue; +- netif_stop_queue(eth->netdev[i]); +- } +-} +- + static netdev_tx_t mtk_start_xmit(struct sk_buff *skb, struct net_device *dev) + { + struct mtk_mac *mac = netdev_priv(dev); +@@ -1183,7 +1172,7 @@ static netdev_tx_t mtk_start_xmit(struct + + tx_num = mtk_cal_txd_req(skb); + if (unlikely(atomic_read(&ring->free_count) <= tx_num)) { +- mtk_stop_queue(eth); ++ netif_stop_queue(dev); + netif_err(eth, tx_queued, dev, + "Tx Ring full when queue awake!\n"); + spin_unlock(ð->page_lock); +@@ -1209,7 +1198,7 @@ static netdev_tx_t mtk_start_xmit(struct + goto drop; + + if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) +- mtk_stop_queue(eth); ++ netif_stop_queue(dev); + + spin_unlock(ð->page_lock); + diff --git a/target/linux/generic/backport-5.15/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch b/target/linux/generic/backport-5.15/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch new file mode 100644 index 0000000000..a192250e28 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-43-net-ethernet-mtk_eth_soc-use-larger-burst-size-for-Q.patch @@ -0,0 +1,37 @@ +From 59555a8d0dd39bf60b7ca1ba5e7393d293f7398d Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:00 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: use larger burst size for QDMA TX + +Improves tx performance + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2214,7 +2214,7 @@ static int mtk_start_dma(struct mtk_eth + if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) { + mtk_w32(eth, + MTK_TX_WB_DDONE | MTK_TX_DMA_EN | +- MTK_DMA_SIZE_16DWORDS | MTK_NDP_CO_PRO | ++ MTK_TX_BT_32DWORDS | MTK_NDP_CO_PRO | + MTK_RX_DMA_EN | MTK_RX_2B_OFFSET | + MTK_RX_BT_32DWORDS, + MTK_QDMA_GLO_CFG); +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -202,7 +202,7 @@ + #define MTK_RX_BT_32DWORDS (3 << 11) + #define MTK_NDP_CO_PRO BIT(10) + #define MTK_TX_WB_DDONE BIT(6) +-#define MTK_DMA_SIZE_16DWORDS (2 << 4) ++#define MTK_TX_BT_32DWORDS (3 << 4) + #define MTK_RX_DMA_BUSY BIT(3) + #define MTK_TX_DMA_BUSY BIT(1) + #define MTK_RX_DMA_EN BIT(2) diff --git a/target/linux/generic/backport-5.15/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch b/target/linux/generic/backport-5.15/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch new file mode 100644 index 0000000000..d695f0fb8a --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-44-net-ethernet-mtk_eth_soc-increase-DMA-ring-sizes.patch @@ -0,0 +1,26 @@ +From 6b4423b258b91032c50a5efca15d3d9bb194ea1d Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:01 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: increase DMA ring sizes + +256 descriptors is not enough for multi-gigabit traffic under load on +MT7622. Bump it to 512 to improve performance. + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -21,7 +21,7 @@ + #define MTK_QDMA_PAGE_SIZE 2048 + #define MTK_MAX_RX_LENGTH 1536 + #define MTK_TX_DMA_BUF_LEN 0x3fff +-#define MTK_DMA_SIZE 256 ++#define MTK_DMA_SIZE 512 + #define MTK_NAPI_WEIGHT 64 + #define MTK_MAC_COUNT 2 + #define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN) diff --git a/target/linux/generic/backport-5.15/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch b/target/linux/generic/backport-5.15/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch new file mode 100644 index 0000000000..207d8397d8 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-45-net-ethernet-mtk_eth_soc-implement-dynamic-interrupt.patch @@ -0,0 +1,313 @@ +From e9229ffd550b2d8c4997c67a501dbc3919fd4e26 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:02 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: implement dynamic interrupt + moderation + +Reduces the number of interrupts under load + +Signed-off-by: Felix Fietkau +[Ilya: add documentation for new struct fields] +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/Kconfig | 1 + + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 96 +++++++++++++++++++-- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 41 +++++++-- + 3 files changed, 124 insertions(+), 14 deletions(-) + +--- a/drivers/net/ethernet/mediatek/Kconfig ++++ b/drivers/net/ethernet/mediatek/Kconfig +@@ -10,6 +10,7 @@ if NET_VENDOR_MEDIATEK + config NET_MEDIATEK_SOC + tristate "MediaTek SoC Gigabit Ethernet support" + select PHYLINK ++ select DIMLIB + help + This driver supports the gigabit ethernet MACs in the + MediaTek SoC family. +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1254,12 +1254,13 @@ static void mtk_update_rx_cpu_idx(struct + static int mtk_poll_rx(struct napi_struct *napi, int budget, + struct mtk_eth *eth) + { ++ struct dim_sample dim_sample = {}; + struct mtk_rx_ring *ring; + int idx; + struct sk_buff *skb; + u8 *data, *new_data; + struct mtk_rx_dma *rxd, trxd; +- int done = 0; ++ int done = 0, bytes = 0; + + while (done < budget) { + struct net_device *netdev; +@@ -1333,6 +1334,7 @@ static int mtk_poll_rx(struct napi_struc + else + skb_checksum_none_assert(skb); + skb->protocol = eth_type_trans(skb, netdev); ++ bytes += pktlen; + + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX && + (trxd.rxd2 & RX_DMA_VTAG)) +@@ -1365,6 +1367,12 @@ rx_done: + mtk_update_rx_cpu_idx(eth); + } + ++ eth->rx_packets += done; ++ eth->rx_bytes += bytes; ++ dim_update_sample(eth->rx_events, eth->rx_packets, eth->rx_bytes, ++ &dim_sample); ++ net_dim(ð->rx_dim, dim_sample); ++ + return done; + } + +@@ -1457,6 +1465,7 @@ static int mtk_poll_tx_pdma(struct mtk_e + static int mtk_poll_tx(struct mtk_eth *eth, int budget) + { + struct mtk_tx_ring *ring = ð->tx_ring; ++ struct dim_sample dim_sample = {}; + unsigned int done[MTK_MAX_DEVS]; + unsigned int bytes[MTK_MAX_DEVS]; + int total = 0, i; +@@ -1474,8 +1483,14 @@ static int mtk_poll_tx(struct mtk_eth *e + continue; + netdev_completed_queue(eth->netdev[i], done[i], bytes[i]); + total += done[i]; ++ eth->tx_packets += done[i]; ++ eth->tx_bytes += bytes[i]; + } + ++ dim_update_sample(eth->tx_events, eth->tx_packets, eth->tx_bytes, ++ &dim_sample); ++ net_dim(ð->tx_dim, dim_sample); ++ + if (mtk_queue_stopped(eth) && + (atomic_read(&ring->free_count) > ring->thresh)) + mtk_wake_queue(eth); +@@ -2150,6 +2165,7 @@ static irqreturn_t mtk_handle_irq_rx(int + { + struct mtk_eth *eth = _eth; + ++ eth->rx_events++; + if (likely(napi_schedule_prep(ð->rx_napi))) { + __napi_schedule(ð->rx_napi); + mtk_rx_irq_disable(eth, MTK_RX_DONE_INT); +@@ -2162,6 +2178,7 @@ static irqreturn_t mtk_handle_irq_tx(int + { + struct mtk_eth *eth = _eth; + ++ eth->tx_events++; + if (likely(napi_schedule_prep(ð->tx_napi))) { + __napi_schedule(ð->tx_napi); + mtk_tx_irq_disable(eth, MTK_TX_DONE_INT); +@@ -2346,6 +2363,9 @@ static int mtk_stop(struct net_device *d + napi_disable(ð->tx_napi); + napi_disable(ð->rx_napi); + ++ cancel_work_sync(ð->rx_dim.work); ++ cancel_work_sync(ð->tx_dim.work); ++ + if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) + mtk_stop_dma(eth, MTK_QDMA_GLO_CFG); + mtk_stop_dma(eth, MTK_PDMA_GLO_CFG); +@@ -2398,6 +2418,64 @@ err_disable_clks: + return ret; + } + ++static void mtk_dim_rx(struct work_struct *work) ++{ ++ struct dim *dim = container_of(work, struct dim, work); ++ struct mtk_eth *eth = container_of(dim, struct mtk_eth, rx_dim); ++ struct dim_cq_moder cur_profile; ++ u32 val, cur; ++ ++ cur_profile = net_dim_get_rx_moderation(eth->rx_dim.mode, ++ dim->profile_ix); ++ spin_lock_bh(ð->dim_lock); ++ ++ val = mtk_r32(eth, MTK_PDMA_DELAY_INT); ++ val &= MTK_PDMA_DELAY_TX_MASK; ++ val |= MTK_PDMA_DELAY_RX_EN; ++ ++ cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK); ++ val |= cur << MTK_PDMA_DELAY_RX_PTIME_SHIFT; ++ ++ cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK); ++ val |= cur << MTK_PDMA_DELAY_RX_PINT_SHIFT; ++ ++ mtk_w32(eth, val, MTK_PDMA_DELAY_INT); ++ mtk_w32(eth, val, MTK_QDMA_DELAY_INT); ++ ++ spin_unlock_bh(ð->dim_lock); ++ ++ dim->state = DIM_START_MEASURE; ++} ++ ++static void mtk_dim_tx(struct work_struct *work) ++{ ++ struct dim *dim = container_of(work, struct dim, work); ++ struct mtk_eth *eth = container_of(dim, struct mtk_eth, tx_dim); ++ struct dim_cq_moder cur_profile; ++ u32 val, cur; ++ ++ cur_profile = net_dim_get_tx_moderation(eth->tx_dim.mode, ++ dim->profile_ix); ++ spin_lock_bh(ð->dim_lock); ++ ++ val = mtk_r32(eth, MTK_PDMA_DELAY_INT); ++ val &= MTK_PDMA_DELAY_RX_MASK; ++ val |= MTK_PDMA_DELAY_TX_EN; ++ ++ cur = min_t(u32, DIV_ROUND_UP(cur_profile.usec, 20), MTK_PDMA_DELAY_PTIME_MASK); ++ val |= cur << MTK_PDMA_DELAY_TX_PTIME_SHIFT; ++ ++ cur = min_t(u32, cur_profile.pkts, MTK_PDMA_DELAY_PINT_MASK); ++ val |= cur << MTK_PDMA_DELAY_TX_PINT_SHIFT; ++ ++ mtk_w32(eth, val, MTK_PDMA_DELAY_INT); ++ mtk_w32(eth, val, MTK_QDMA_DELAY_INT); ++ ++ spin_unlock_bh(ð->dim_lock); ++ ++ dim->state = DIM_START_MEASURE; ++} ++ + static int mtk_hw_init(struct mtk_eth *eth) + { + int i, val, ret; +@@ -2419,9 +2497,6 @@ static int mtk_hw_init(struct mtk_eth *e + goto err_disable_pm; + } + +- /* enable interrupt delay for RX */ +- mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT); +- + /* disable delay and normal interrupt */ + mtk_tx_irq_disable(eth, ~0); + mtk_rx_irq_disable(eth, ~0); +@@ -2460,11 +2535,11 @@ static int mtk_hw_init(struct mtk_eth *e + /* Enable RX VLan Offloading */ + mtk_w32(eth, 1, MTK_CDMP_EG_CTRL); + +- /* enable interrupt delay for RX */ +- mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT); ++ /* set interrupt delays based on current Net DIM sample */ ++ mtk_dim_rx(ð->rx_dim.work); ++ mtk_dim_tx(ð->tx_dim.work); + + /* disable delay and normal interrupt */ +- mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); + mtk_tx_irq_disable(eth, ~0); + mtk_rx_irq_disable(eth, ~0); + +@@ -2969,6 +3044,13 @@ static int mtk_probe(struct platform_dev + spin_lock_init(ð->page_lock); + spin_lock_init(ð->tx_irq_lock); + spin_lock_init(ð->rx_irq_lock); ++ spin_lock_init(ð->dim_lock); ++ ++ eth->rx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE; ++ INIT_WORK(ð->rx_dim.work, mtk_dim_rx); ++ ++ eth->tx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE; ++ INIT_WORK(ð->tx_dim.work, mtk_dim_tx); + + if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) { + eth->ethsys = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include "mtk_ppe.h" + + #define MTK_QDMA_PAGE_SIZE 2048 +@@ -136,13 +137,18 @@ + + /* PDMA Delay Interrupt Register */ + #define MTK_PDMA_DELAY_INT 0xa0c ++#define MTK_PDMA_DELAY_RX_MASK GENMASK(15, 0) + #define MTK_PDMA_DELAY_RX_EN BIT(15) +-#define MTK_PDMA_DELAY_RX_PINT 4 + #define MTK_PDMA_DELAY_RX_PINT_SHIFT 8 +-#define MTK_PDMA_DELAY_RX_PTIME 4 +-#define MTK_PDMA_DELAY_RX_DELAY \ +- (MTK_PDMA_DELAY_RX_EN | MTK_PDMA_DELAY_RX_PTIME | \ +- (MTK_PDMA_DELAY_RX_PINT << MTK_PDMA_DELAY_RX_PINT_SHIFT)) ++#define MTK_PDMA_DELAY_RX_PTIME_SHIFT 0 ++ ++#define MTK_PDMA_DELAY_TX_MASK GENMASK(31, 16) ++#define MTK_PDMA_DELAY_TX_EN BIT(31) ++#define MTK_PDMA_DELAY_TX_PINT_SHIFT 24 ++#define MTK_PDMA_DELAY_TX_PTIME_SHIFT 16 ++ ++#define MTK_PDMA_DELAY_PINT_MASK 0x7f ++#define MTK_PDMA_DELAY_PTIME_MASK 0xff + + /* PDMA Interrupt Status Register */ + #define MTK_PDMA_INT_STATUS 0xa20 +@@ -224,6 +230,7 @@ + /* QDMA Interrupt Status Register */ + #define MTK_QDMA_INT_STATUS 0x1A18 + #define MTK_RX_DONE_DLY BIT(30) ++#define MTK_TX_DONE_DLY BIT(28) + #define MTK_RX_DONE_INT3 BIT(19) + #define MTK_RX_DONE_INT2 BIT(18) + #define MTK_RX_DONE_INT1 BIT(17) +@@ -233,8 +240,7 @@ + #define MTK_TX_DONE_INT1 BIT(1) + #define MTK_TX_DONE_INT0 BIT(0) + #define MTK_RX_DONE_INT MTK_RX_DONE_DLY +-#define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \ +- MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3) ++#define MTK_TX_DONE_INT MTK_TX_DONE_DLY + + /* QDMA Interrupt grouping registers */ + #define MTK_QDMA_INT_GRP1 0x1a20 +@@ -863,6 +869,7 @@ struct mtk_sgmii { + * @page_lock: Make sure that register operations are atomic + * @tx_irq__lock: Make sure that IRQ register operations are atomic + * @rx_irq__lock: Make sure that IRQ register operations are atomic ++ * @dim_lock: Make sure that Net DIM operations are atomic + * @dummy_dev: we run 2 netdevs on 1 physical DMA ring and need a + * dummy for NAPI to work + * @netdev: The netdev instances +@@ -881,6 +888,14 @@ struct mtk_sgmii { + * @rx_ring_qdma: Pointer to the memory holding info about the QDMA RX ring + * @tx_napi: The TX NAPI struct + * @rx_napi: The RX NAPI struct ++ * @rx_events: Net DIM RX event counter ++ * @rx_packets: Net DIM RX packet counter ++ * @rx_bytes: Net DIM RX byte counter ++ * @rx_dim: Net DIM RX context ++ * @tx_events: Net DIM TX event counter ++ * @tx_packets: Net DIM TX packet counter ++ * @tx_bytes: Net DIM TX byte counter ++ * @tx_dim: Net DIM TX context + * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring + * @phy_scratch_ring: physical address of scratch_ring + * @scratch_head: The scratch memory that scratch_ring points to. +@@ -925,6 +940,18 @@ struct mtk_eth { + + const struct mtk_soc_data *soc; + ++ spinlock_t dim_lock; ++ ++ u32 rx_events; ++ u32 rx_packets; ++ u32 rx_bytes; ++ struct dim rx_dim; ++ ++ u32 tx_events; ++ u32 tx_packets; ++ u32 tx_bytes; ++ struct dim tx_dim; ++ + u32 tx_int_mask_reg; + u32 tx_int_status_reg; + u32 rx_dma_l4_valid; diff --git a/target/linux/generic/backport-5.15/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch b/target/linux/generic/backport-5.15/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch new file mode 100644 index 0000000000..c2252ed728 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-46-net-ethernet-mtk_eth_soc-cache-HW-pointer-of-last-fr.patch @@ -0,0 +1,73 @@ +From 4e6bf609569c59b6bd6acf4a607c096cbd820d79 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:03 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX + descriptor + +The value is only updated by the CPU, so it is cheaper to access from the +ring data structure than from a hardware register. + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++---- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 ++ + 2 files changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1385,7 +1385,7 @@ static int mtk_poll_tx_qdma(struct mtk_e + struct mtk_tx_buf *tx_buf; + u32 cpu, dma; + +- cpu = mtk_r32(eth, MTK_QTX_CRX_PTR); ++ cpu = ring->last_free_ptr; + dma = mtk_r32(eth, MTK_QTX_DRX_PTR); + + desc = mtk_qdma_phys_to_virt(ring, cpu); +@@ -1419,6 +1419,7 @@ static int mtk_poll_tx_qdma(struct mtk_e + cpu = next_cpu; + } + ++ ring->last_free_ptr = cpu; + mtk_w32(eth, cpu, MTK_QTX_CRX_PTR); + + return budget; +@@ -1619,6 +1620,7 @@ static int mtk_tx_alloc(struct mtk_eth * + atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); + ring->next_free = &ring->dma[0]; + ring->last_free = &ring->dma[MTK_DMA_SIZE - 1]; ++ ring->last_free_ptr = (u32)(ring->phys + ((MTK_DMA_SIZE - 1) * sz)); + ring->thresh = MAX_SKB_FRAGS; + + /* make sure that all changes to the dma ring are flushed before we +@@ -1632,9 +1634,7 @@ static int mtk_tx_alloc(struct mtk_eth * + mtk_w32(eth, + ring->phys + ((MTK_DMA_SIZE - 1) * sz), + MTK_QTX_CRX_PTR); +- mtk_w32(eth, +- ring->phys + ((MTK_DMA_SIZE - 1) * sz), +- MTK_QTX_DRX_PTR); ++ mtk_w32(eth, ring->last_free_ptr, MTK_QTX_DRX_PTR); + mtk_w32(eth, (QDMA_RES_THRES << 8) | QDMA_RES_THRES, + MTK_QTX_CFG(0)); + } else { +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -656,6 +656,7 @@ struct mtk_tx_buf { + * @phys: The physical addr of tx_buf + * @next_free: Pointer to the next free descriptor + * @last_free: Pointer to the last free descriptor ++ * @last_free_ptr: Hardware pointer value of the last free descriptor + * @thresh: The threshold of minimum amount of free descriptors + * @free_count: QDMA uses a linked list. Track how many free descriptors + * are present +@@ -666,6 +667,7 @@ struct mtk_tx_ring { + dma_addr_t phys; + struct mtk_tx_dma *next_free; + struct mtk_tx_dma *last_free; ++ u32 last_free_ptr; + u16 thresh; + atomic_t free_count; + int dma_size; diff --git a/target/linux/generic/backport-5.15/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch b/target/linux/generic/backport-5.15/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch new file mode 100644 index 0000000000..09b8b3afb9 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-47-net-ethernet-mtk_eth_soc-only-read-the-full-RX-descr.patch @@ -0,0 +1,49 @@ +From 816ac3e6e67bdd78d86226c6eb53619780750e92 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:04 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: only read the full RX descriptor + if DMA is done + +Uncached memory access is expensive, and there is no need to access all +descriptor words if we can't process them anyway + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 ++++++++---- + 1 file changed, 8 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -798,13 +798,18 @@ static inline int mtk_max_buf_size(int f + return buf_size; + } + +-static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd, ++static inline bool mtk_rx_get_desc(struct mtk_rx_dma *rxd, + struct mtk_rx_dma *dma_rxd) + { +- rxd->rxd1 = READ_ONCE(dma_rxd->rxd1); + rxd->rxd2 = READ_ONCE(dma_rxd->rxd2); ++ if (!(rxd->rxd2 & RX_DMA_DONE)) ++ return false; ++ ++ rxd->rxd1 = READ_ONCE(dma_rxd->rxd1); + rxd->rxd3 = READ_ONCE(dma_rxd->rxd3); + rxd->rxd4 = READ_ONCE(dma_rxd->rxd4); ++ ++ return true; + } + + /* the qdma core needs scratch memory to be setup */ +@@ -1276,8 +1281,7 @@ static int mtk_poll_rx(struct napi_struc + rxd = &ring->dma[idx]; + data = ring->data[idx]; + +- mtk_rx_get_desc(&trxd, rxd); +- if (!(trxd.rxd2 & RX_DMA_DONE)) ++ if (!mtk_rx_get_desc(&trxd, rxd)) + break; + + /* find out which mac the packet come from. values start at 1 */ diff --git a/target/linux/generic/backport-5.15/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch b/target/linux/generic/backport-5.15/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch new file mode 100644 index 0000000000..411374c2e7 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-48-net-ethernet-mtk_eth_soc-reduce-unnecessary-interrup.patch @@ -0,0 +1,39 @@ +From 16769a8923fad5a5377253bcd76b0e0d64976c73 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:05 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: reduce unnecessary interrupts + +Avoid rearming interrupt if napi_complete returns false + +Signed-off-by: Felix Fietkau +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 +++++---- + 1 file changed, 5 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1540,8 +1540,8 @@ static int mtk_napi_tx(struct napi_struc + if (status & MTK_TX_DONE_INT) + return budget; + +- napi_complete(napi); +- mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); ++ if (napi_complete(napi)) ++ mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); + + return tx_done; + } +@@ -1574,8 +1574,9 @@ poll_again: + remain_budget -= rx_done; + goto poll_again; + } +- napi_complete(napi); +- mtk_rx_irq_enable(eth, MTK_RX_DONE_INT); ++ ++ if (napi_complete(napi)) ++ mtk_rx_irq_enable(eth, MTK_RX_DONE_INT); + + return rx_done + budget - remain_budget; + } diff --git a/target/linux/generic/backport-5.15/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch b/target/linux/generic/backport-5.15/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch new file mode 100644 index 0000000000..d0926325d9 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-49-net-ethernet-mtk_eth_soc-rework-NAPI-callbacks.patch @@ -0,0 +1,110 @@ +From db2c7b353db3b3f71b55f9ff4627d8a786446fbe Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Thu, 22 Apr 2021 22:21:06 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: rework NAPI callbacks + +Use napi_complete_done to communicate total TX and RX work done to NAPI. +Count total RX work up instead of remaining work down for clarity. +Remove unneeded local variables for clarity. Use do {} while instead of +goto for clarity. + +Suggested-by: Jakub Kicinski +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 54 +++++++++------------ + 1 file changed, 24 insertions(+), 30 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -1517,7 +1517,6 @@ static void mtk_handle_status_irq(struct + static int mtk_napi_tx(struct napi_struct *napi, int budget) + { + struct mtk_eth *eth = container_of(napi, struct mtk_eth, tx_napi); +- u32 status, mask; + int tx_done = 0; + + if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) +@@ -1526,21 +1525,19 @@ static int mtk_napi_tx(struct napi_struc + tx_done = mtk_poll_tx(eth, budget); + + if (unlikely(netif_msg_intr(eth))) { +- status = mtk_r32(eth, eth->tx_int_status_reg); +- mask = mtk_r32(eth, eth->tx_int_mask_reg); + dev_info(eth->dev, +- "done tx %d, intr 0x%08x/0x%x\n", +- tx_done, status, mask); ++ "done tx %d, intr 0x%08x/0x%x\n", tx_done, ++ mtk_r32(eth, eth->tx_int_status_reg), ++ mtk_r32(eth, eth->tx_int_mask_reg)); + } + + if (tx_done == budget) + return budget; + +- status = mtk_r32(eth, eth->tx_int_status_reg); +- if (status & MTK_TX_DONE_INT) ++ if (mtk_r32(eth, eth->tx_int_status_reg) & MTK_TX_DONE_INT) + return budget; + +- if (napi_complete(napi)) ++ if (napi_complete_done(napi, tx_done)) + mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); + + return tx_done; +@@ -1549,36 +1546,33 @@ static int mtk_napi_tx(struct napi_struc + static int mtk_napi_rx(struct napi_struct *napi, int budget) + { + struct mtk_eth *eth = container_of(napi, struct mtk_eth, rx_napi); +- u32 status, mask; +- int rx_done = 0; +- int remain_budget = budget; ++ int rx_done_total = 0; + + mtk_handle_status_irq(eth); + +-poll_again: +- mtk_w32(eth, MTK_RX_DONE_INT, MTK_PDMA_INT_STATUS); +- rx_done = mtk_poll_rx(napi, remain_budget, eth); ++ do { ++ int rx_done; + +- if (unlikely(netif_msg_intr(eth))) { +- status = mtk_r32(eth, MTK_PDMA_INT_STATUS); +- mask = mtk_r32(eth, MTK_PDMA_INT_MASK); +- dev_info(eth->dev, +- "done rx %d, intr 0x%08x/0x%x\n", +- rx_done, status, mask); +- } +- if (rx_done == remain_budget) +- return budget; ++ mtk_w32(eth, MTK_RX_DONE_INT, MTK_PDMA_INT_STATUS); ++ rx_done = mtk_poll_rx(napi, budget - rx_done_total, eth); ++ rx_done_total += rx_done; ++ ++ if (unlikely(netif_msg_intr(eth))) { ++ dev_info(eth->dev, ++ "done rx %d, intr 0x%08x/0x%x\n", rx_done, ++ mtk_r32(eth, MTK_PDMA_INT_STATUS), ++ mtk_r32(eth, MTK_PDMA_INT_MASK)); ++ } + +- status = mtk_r32(eth, MTK_PDMA_INT_STATUS); +- if (status & MTK_RX_DONE_INT) { +- remain_budget -= rx_done; +- goto poll_again; +- } ++ if (rx_done_total == budget) ++ return budget; ++ ++ } while (mtk_r32(eth, MTK_PDMA_INT_STATUS) & MTK_RX_DONE_INT); + +- if (napi_complete(napi)) ++ if (napi_complete_done(napi, rx_done_total)) + mtk_rx_irq_enable(eth, MTK_RX_DONE_INT); + +- return rx_done + budget - remain_budget; ++ return rx_done_total; + } + + static int mtk_tx_alloc(struct mtk_eth *eth) diff --git a/target/linux/generic/backport-5.15/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch b/target/linux/generic/backport-5.15/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch new file mode 100644 index 0000000000..ab298ec42b --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-50-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch @@ -0,0 +1,47 @@ +From fa817272c37ef78e25dc14e4760ac78a7043a18a Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Thu, 22 Apr 2021 22:21:07 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if + present + +This improves GRO performance + +Signed-off-by: Felix Fietkau +[Ilya: Use MTK_RXD4_FOE_ENTRY instead of GENMASK(13, 0)] +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + #include + + #include "mtk_eth_soc.h" +@@ -1271,6 +1272,7 @@ static int mtk_poll_rx(struct napi_struc + struct net_device *netdev; + unsigned int pktlen; + dma_addr_t dma_addr; ++ u32 hash; + int mac; + + ring = mtk_get_rx_ring(eth); +@@ -1340,6 +1342,12 @@ static int mtk_poll_rx(struct napi_struc + skb->protocol = eth_type_trans(skb, netdev); + bytes += pktlen; + ++ hash = trxd.rxd4 & MTK_RXD4_FOE_ENTRY; ++ if (hash != MTK_RXD4_FOE_ENTRY) { ++ hash = jhash_1word(hash, 0); ++ skb_set_hash(skb, hash, PKT_HASH_TYPE_L4); ++ } ++ + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX && + (trxd.rxd2 & RX_DMA_VTAG)) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), diff --git a/target/linux/generic/backport-5.15/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch b/target/linux/generic/backport-5.15/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch new file mode 100644 index 0000000000..26bb33e42c --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-51-net-ethernet-mtk_eth_soc-use-iopoll.h-macro-for-DMA-.patch @@ -0,0 +1,71 @@ +From 3bc8e0aff23be0526af0dbc7973a8866a08d73f1 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Thu, 22 Apr 2021 22:21:08 -0700 +Subject: [PATCH] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init + +Replace a tight busy-wait loop without a pause with a standard +readx_poll_timeout_atomic routine with a 5 us poll period. + +Tested by booting a MT7621 device to ensure the driver initializes +properly. + +Signed-off-by: Ilya Lipnitskiy +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++------------ + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +- + 2 files changed, 14 insertions(+), 17 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2054,25 +2054,22 @@ static int mtk_set_features(struct net_d + /* wait for DMA to finish whatever it is doing before we start using it again */ + static int mtk_dma_busy_wait(struct mtk_eth *eth) + { +- unsigned long t_start = jiffies; ++ unsigned int reg; ++ int ret; ++ u32 val; + +- while (1) { +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) { +- if (!(mtk_r32(eth, MTK_QDMA_GLO_CFG) & +- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY))) +- return 0; +- } else { +- if (!(mtk_r32(eth, MTK_PDMA_GLO_CFG) & +- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY))) +- return 0; +- } ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) ++ reg = MTK_QDMA_GLO_CFG; ++ else ++ reg = MTK_PDMA_GLO_CFG; + +- if (time_after(jiffies, t_start + MTK_DMA_BUSY_TIMEOUT)) +- break; +- } ++ ret = readx_poll_timeout_atomic(__raw_readl, eth->base + reg, val, ++ !(val & (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)), ++ 5, MTK_DMA_BUSY_TIMEOUT_US); ++ if (ret) ++ dev_err(eth->dev, "DMA init timeout\n"); + +- dev_err(eth->dev, "DMA init timeout\n"); +- return -1; ++ return ret; + } + + static int mtk_dma_init(struct mtk_eth *eth) +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -213,7 +213,7 @@ + #define MTK_TX_DMA_BUSY BIT(1) + #define MTK_RX_DMA_EN BIT(2) + #define MTK_TX_DMA_EN BIT(0) +-#define MTK_DMA_BUSY_TIMEOUT HZ ++#define MTK_DMA_BUSY_TIMEOUT_US 1000000 + + /* QDMA Reset Index Register */ + #define MTK_QDMA_RST_IDX 0x1A08 diff --git a/target/linux/generic/backport-5.15/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch b/target/linux/generic/backport-5.15/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch new file mode 100644 index 0000000000..a846ce43e2 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-52-net-ethernet-mtk_eth_soc-missing-mutex.patch @@ -0,0 +1,63 @@ +From: Pablo Neira Ayuso +Date: Sun, 18 Apr 2021 23:11:44 +0200 +Subject: [PATCH] net: ethernet: mtk_eth_soc: missing mutex + +Patch 2ed37183abb7 ("netfilter: flowtable: separate replace, destroy and +stats to different workqueues") splits the workqueue per event type. Add +a mutex to serialize updates. + +Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") +Reported-by: Frank Wunderlich +Signed-off-by: Pablo Neira Ayuso +Signed-off-by: David S. Miller +--- + +--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -392,6 +392,8 @@ mtk_flow_offload_stats(struct mtk_eth *e + return 0; + } + ++static DEFINE_MUTEX(mtk_flow_offload_mutex); ++ + static int + mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv) + { +@@ -399,6 +401,7 @@ mtk_eth_setup_tc_block_cb(enum tc_setup_ + struct net_device *dev = cb_priv; + struct mtk_mac *mac = netdev_priv(dev); + struct mtk_eth *eth = mac->hw; ++ int err; + + if (!tc_can_offload(dev)) + return -EOPNOTSUPP; +@@ -406,18 +409,24 @@ mtk_eth_setup_tc_block_cb(enum tc_setup_ + if (type != TC_SETUP_CLSFLOWER) + return -EOPNOTSUPP; + ++ mutex_lock(&mtk_flow_offload_mutex); + switch (cls->command) { + case FLOW_CLS_REPLACE: +- return mtk_flow_offload_replace(eth, cls); ++ err = mtk_flow_offload_replace(eth, cls); ++ break; + case FLOW_CLS_DESTROY: +- return mtk_flow_offload_destroy(eth, cls); ++ err = mtk_flow_offload_destroy(eth, cls); ++ break; + case FLOW_CLS_STATS: +- return mtk_flow_offload_stats(eth, cls); ++ err = mtk_flow_offload_stats(eth, cls); ++ break; + default: +- return -EOPNOTSUPP; ++ err = -EOPNOTSUPP; ++ break; + } ++ mutex_unlock(&mtk_flow_offload_mutex); + +- return 0; ++ return err; + } + + static int diff --git a/target/linux/generic/backport-5.15/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch b/target/linux/generic/backport-5.15/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch new file mode 100644 index 0000000000..806fd0dcdf --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-53-net-ethernet-mtk_eth_soc-handle-VLAN-pop-action.patch @@ -0,0 +1,22 @@ +From: Pablo Neira Ayuso +Date: Sun, 18 Apr 2021 23:11:45 +0200 +Subject: [PATCH] net: ethernet: mtk_eth_soc: handle VLAN pop action + +Do not hit EOPNOTSUPP when flowtable offload provides a VLAN pop action. + +Fixes: efce49dfe6a8 ("netfilter: flowtable: add vlan pop action offload support") +Signed-off-by: Pablo Neira Ayuso +Signed-off-by: David S. Miller +--- + +--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -233,6 +233,8 @@ mtk_flow_offload_replace(struct mtk_eth + data.vlan.proto = act->vlan.proto; + data.vlan.num++; + break; ++ case FLOW_ACTION_VLAN_POP: ++ break; + case FLOW_ACTION_PPPOE_PUSH: + if (data.pppoe.num == 1) + return -EOPNOTSUPP; diff --git a/target/linux/generic/backport-5.15/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch b/target/linux/generic/backport-5.15/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch new file mode 100644 index 0000000000..42b55f021a --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-54-netfilter-flowtable-dst_check-from-garbage-collector.patch @@ -0,0 +1,159 @@ +From: Pablo Neira Ayuso +Date: Sun, 28 Mar 2021 23:08:55 +0200 +Subject: [PATCH] netfilter: flowtable: dst_check() from garbage collector path + +Move dst_check() to the garbage collector path. Stale routes trigger the +flow entry teardown state which makes affected flows go back to the +classic forwarding path to re-evaluate flow offloading. + +IPv6 requires the dst cookie to work, store it in the flow_tuple, +otherwise dst_check() always fails. + +Fixes: e5075c0badaa ("netfilter: flowtable: call dst_check() to fall back to classic forwarding") +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -129,7 +129,10 @@ struct flow_offload_tuple { + in_vlan_ingress:2; + u16 mtu; + union { +- struct dst_entry *dst_cache; ++ struct { ++ struct dst_entry *dst_cache; ++ u32 dst_cookie; ++ }; + struct { + u32 ifidx; + u32 hw_ifidx; +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -74,6 +74,18 @@ err_ct_refcnt: + } + EXPORT_SYMBOL_GPL(flow_offload_alloc); + ++static u32 flow_offload_dst_cookie(struct flow_offload_tuple *flow_tuple) ++{ ++ const struct rt6_info *rt; ++ ++ if (flow_tuple->l3proto == NFPROTO_IPV6) { ++ rt = (const struct rt6_info *)flow_tuple->dst_cache; ++ return rt6_get_cookie(rt); ++ } ++ ++ return 0; ++} ++ + static int flow_offload_fill_route(struct flow_offload *flow, + const struct nf_flow_route *route, + enum flow_offload_tuple_dir dir) +@@ -116,6 +128,7 @@ static int flow_offload_fill_route(struc + return -1; + + flow_tuple->dst_cache = dst; ++ flow_tuple->dst_cookie = flow_offload_dst_cookie(flow_tuple); + break; + } + flow_tuple->xmit_type = route->tuple[dir].xmit_type; +@@ -389,11 +402,33 @@ nf_flow_table_iterate(struct nf_flowtabl + return err; + } + ++static bool flow_offload_stale_dst(struct flow_offload_tuple *tuple) ++{ ++ struct dst_entry *dst; ++ ++ if (tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || ++ tuple->xmit_type == FLOW_OFFLOAD_XMIT_XFRM) { ++ dst = tuple->dst_cache; ++ if (!dst_check(dst, tuple->dst_cookie)) ++ return true; ++ } ++ ++ return false; ++} ++ ++static bool nf_flow_has_stale_dst(struct flow_offload *flow) ++{ ++ return flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple) || ++ flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple); ++} ++ + static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data) + { + struct nf_flowtable *flow_table = data; + +- if (nf_flow_has_expired(flow) || nf_ct_is_dying(flow->ct)) ++ if (nf_flow_has_expired(flow) || ++ nf_ct_is_dying(flow->ct) || ++ nf_flow_has_stale_dst(flow)) + set_bit(NF_FLOW_TEARDOWN, &flow->flags); + + if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) { +--- a/net/netfilter/nf_flow_table_ip.c ++++ b/net/netfilter/nf_flow_table_ip.c +@@ -364,15 +364,6 @@ nf_flow_offload_ip_hook(void *priv, stru + if (nf_flow_state_check(flow, iph->protocol, skb, thoff)) + return NF_ACCEPT; + +- if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || +- tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) { +- rt = (struct rtable *)tuplehash->tuple.dst_cache; +- if (!dst_check(&rt->dst, 0)) { +- flow_offload_teardown(flow); +- return NF_ACCEPT; +- } +- } +- + if (skb_try_make_writable(skb, thoff + hdrsize)) + return NF_DROP; + +@@ -391,6 +382,7 @@ nf_flow_offload_ip_hook(void *priv, stru + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + + if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { ++ rt = (struct rtable *)tuplehash->tuple.dst_cache; + memset(skb->cb, 0, sizeof(struct inet_skb_parm)); + IPCB(skb)->iif = skb->dev->ifindex; + IPCB(skb)->flags = IPSKB_FORWARDED; +@@ -399,6 +391,7 @@ nf_flow_offload_ip_hook(void *priv, stru + + switch (tuplehash->tuple.xmit_type) { + case FLOW_OFFLOAD_XMIT_NEIGH: ++ rt = (struct rtable *)tuplehash->tuple.dst_cache; + outdev = rt->dst.dev; + skb->dev = outdev; + nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr); +@@ -607,15 +600,6 @@ nf_flow_offload_ipv6_hook(void *priv, st + if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff)) + return NF_ACCEPT; + +- if (tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_NEIGH || +- tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM) { +- rt = (struct rt6_info *)tuplehash->tuple.dst_cache; +- if (!dst_check(&rt->dst, 0)) { +- flow_offload_teardown(flow); +- return NF_ACCEPT; +- } +- } +- + if (skb_try_make_writable(skb, thoff + hdrsize)) + return NF_DROP; + +@@ -633,6 +617,7 @@ nf_flow_offload_ipv6_hook(void *priv, st + nf_ct_acct_update(flow->ct, tuplehash->tuple.dir, skb->len); + + if (unlikely(tuplehash->tuple.xmit_type == FLOW_OFFLOAD_XMIT_XFRM)) { ++ rt = (struct rt6_info *)tuplehash->tuple.dst_cache; + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); + IP6CB(skb)->iif = skb->dev->ifindex; + IP6CB(skb)->flags = IP6SKB_FORWARDED; +@@ -641,6 +626,7 @@ nf_flow_offload_ipv6_hook(void *priv, st + + switch (tuplehash->tuple.xmit_type) { + case FLOW_OFFLOAD_XMIT_NEIGH: ++ rt = (struct rt6_info *)tuplehash->tuple.dst_cache; + outdev = rt->dst.dev; + skb->dev = outdev; + nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6); diff --git a/target/linux/generic/backport-5.15/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch b/target/linux/generic/backport-5.15/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch new file mode 100644 index 0000000000..e5a346cac4 --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-55-netfilter-conntrack-Introduce-tcp-offload-timeout-co.patch @@ -0,0 +1,94 @@ +From: Oz Shlomo +Date: Thu, 3 Jun 2021 15:12:33 +0300 +Subject: [PATCH] netfilter: conntrack: Introduce tcp offload timeout + configuration + +TCP connections may be offloaded from nf conntrack to nf flow table. +Offloaded connections are aged after 30 seconds of inactivity. +Once aged, ownership is returned to conntrack with a hard coded pickup +time of 120 seconds, after which the connection may be deleted. +eted. The current aging intervals may be too aggressive for some users. + +Provide users with the ability to control the nf flow table offload +aging and pickup time intervals via sysctl parameter as a pre-step for +configuring the nf flow table GC timeout intervals. + +Signed-off-by: Oz Shlomo +Reviewed-by: Paul Blakey +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netns/conntrack.h ++++ b/include/net/netns/conntrack.h +@@ -27,6 +27,10 @@ struct nf_tcp_net { + int tcp_loose; + int tcp_be_liberal; + int tcp_max_retrans; ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ unsigned int offload_timeout; ++ unsigned int offload_pickup; ++#endif + }; + + enum udp_conntrack { +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -1438,6 +1438,11 @@ void nf_conntrack_tcp_init_net(struct ne + tn->tcp_loose = nf_ct_tcp_loose; + tn->tcp_be_liberal = nf_ct_tcp_be_liberal; + tn->tcp_max_retrans = nf_ct_tcp_max_retrans; ++ ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ tn->offload_timeout = 30 * HZ; ++ tn->offload_pickup = 120 * HZ; ++#endif + } + + const struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp = +--- a/net/netfilter/nf_conntrack_standalone.c ++++ b/net/netfilter/nf_conntrack_standalone.c +@@ -567,6 +567,10 @@ enum nf_ct_sysctl_index { + NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_CLOSE, + NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_RETRANS, + NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_UNACK, ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD, ++ NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP, ++#endif + NF_SYSCTL_CT_PROTO_TCP_LOOSE, + NF_SYSCTL_CT_PROTO_TCP_LIBERAL, + NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS, +@@ -758,6 +762,20 @@ static struct ctl_table nf_ct_sysctl_tab + .mode = 0644, + .proc_handler = proc_dointvec_jiffies, + }, ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ [NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD] = { ++ .procname = "nf_flowtable_tcp_timeout", ++ .maxlen = sizeof(unsigned int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec_jiffies, ++ }, ++ [NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP] = { ++ .procname = "nf_flowtable_tcp_pickup", ++ .maxlen = sizeof(unsigned int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec_jiffies, ++ }, ++#endif + [NF_SYSCTL_CT_PROTO_TCP_LOOSE] = { + .procname = "nf_conntrack_tcp_loose", + .maxlen = sizeof(int), +@@ -967,6 +985,12 @@ static void nf_conntrack_standalone_init + XASSIGN(LIBERAL, &tn->tcp_be_liberal); + XASSIGN(MAX_RETRANS, &tn->tcp_max_retrans); + #undef XASSIGN ++ ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD].data = &tn->offload_timeout; ++ table[NF_SYSCTL_CT_PROTO_TIMEOUT_TCP_OFFLOAD_PICKUP].data = &tn->offload_pickup; ++#endif ++ + } + + static void nf_conntrack_standalone_init_sctp_sysctl(struct net *net, diff --git a/target/linux/generic/backport-5.15/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch b/target/linux/generic/backport-5.15/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch new file mode 100644 index 0000000000..416e20356d --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch @@ -0,0 +1,92 @@ +From: Oz Shlomo +Date: Thu, 3 Jun 2021 15:12:34 +0300 +Subject: [PATCH] netfilter: conntrack: Introduce udp offload timeout + configuration + +UDP connections may be offloaded from nf conntrack to nf flow table. +Offloaded connections are aged after 30 seconds of inactivity. +Once aged, ownership is returned to conntrack with a hard coded pickup +time of 30 seconds, after which the connection may be deleted. +eted. The current aging intervals may be too aggressive for some users. + +Provide users with the ability to control the nf flow table offload +aging and pickup time intervals via sysctl parameter as a pre-step for +configuring the nf flow table GC timeout intervals. + +Signed-off-by: Oz Shlomo +Reviewed-by: Paul Blakey +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netns/conntrack.h ++++ b/include/net/netns/conntrack.h +@@ -41,6 +41,10 @@ enum udp_conntrack { + + struct nf_udp_net { + unsigned int timeouts[UDP_CT_MAX]; ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ unsigned int offload_timeout; ++ unsigned int offload_pickup; ++#endif + }; + + struct nf_icmp_net { +--- a/net/netfilter/nf_conntrack_proto_udp.c ++++ b/net/netfilter/nf_conntrack_proto_udp.c +@@ -273,6 +273,11 @@ void nf_conntrack_udp_init_net(struct ne + + for (i = 0; i < UDP_CT_MAX; i++) + un->timeouts[i] = udp_timeouts[i]; ++ ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ un->offload_timeout = 30 * HZ; ++ un->offload_pickup = 30 * HZ; ++#endif + } + + const struct nf_conntrack_l4proto nf_conntrack_l4proto_udp = +--- a/net/netfilter/nf_conntrack_standalone.c ++++ b/net/netfilter/nf_conntrack_standalone.c +@@ -576,6 +576,10 @@ enum nf_ct_sysctl_index { + NF_SYSCTL_CT_PROTO_TCP_MAX_RETRANS, + NF_SYSCTL_CT_PROTO_TIMEOUT_UDP, + NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM, ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD, ++ NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP, ++#endif + NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP, + NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6, + #ifdef CONFIG_NF_CT_PROTO_SCTP +@@ -810,6 +814,20 @@ static struct ctl_table nf_ct_sysctl_tab + .mode = 0644, + .proc_handler = proc_dointvec_jiffies, + }, ++#if IS_ENABLED(CONFIG_NFT_FLOW_OFFLOAD) ++ [NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD] = { ++ .procname = "nf_flowtable_udp_timeout", ++ .maxlen = sizeof(unsigned int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec_jiffies, ++ }, ++ [NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP] = { ++ .procname = "nf_flowtable_udp_pickup", ++ .maxlen = sizeof(unsigned int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec_jiffies, ++ }, ++#endif + [NF_SYSCTL_CT_PROTO_TIMEOUT_ICMP] = { + .procname = "nf_conntrack_icmp_timeout", + .maxlen = sizeof(unsigned int), +@@ -1078,6 +1096,10 @@ static int nf_conntrack_standalone_init_ + table[NF_SYSCTL_CT_PROTO_TIMEOUT_ICMPV6].data = &nf_icmpv6_pernet(net)->timeout; + table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP].data = &un->timeouts[UDP_CT_UNREPLIED]; + table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_STREAM].data = &un->timeouts[UDP_CT_REPLIED]; ++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE) ++ table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD].data = &un->offload_timeout; ++ table[NF_SYSCTL_CT_PROTO_TIMEOUT_UDP_OFFLOAD_PICKUP].data = &un->offload_pickup; ++#endif + + nf_conntrack_standalone_init_tcp_sysctl(net, table); + nf_conntrack_standalone_init_sctp_sysctl(net, table); diff --git a/target/linux/generic/backport-5.15/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch b/target/linux/generic/backport-5.15/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch new file mode 100644 index 0000000000..1e82308eaa --- /dev/null +++ b/target/linux/generic/backport-5.15/610-v5.13-57-netfilter-flowtable-Set-offload-timeouts-according-t.patch @@ -0,0 +1,134 @@ +From: Oz Shlomo +Date: Thu, 3 Jun 2021 15:12:35 +0300 +Subject: [PATCH] netfilter: flowtable: Set offload timeouts according to proto + values + +Currently the aging period for tcp/udp connections is hard coded to +30 seconds. Aged tcp/udp connections configure a hard coded 120/30 +seconds pickup timeout for conntrack. +This configuration may be too aggressive or permissive for some users. + +Dynamically configure the nf flow table GC timeout intervals according +to the user defined values. + +Signed-off-by: Oz Shlomo +Reviewed-by: Paul Blakey +Signed-off-by: Pablo Neira Ayuso +--- + +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -174,6 +174,8 @@ struct flow_offload { + #define NF_FLOW_TIMEOUT (30 * HZ) + #define nf_flowtable_time_stamp (u32)jiffies + ++unsigned long flow_offload_get_timeout(struct flow_offload *flow); ++ + static inline __s32 nf_flow_timeout_delta(unsigned int timeout) + { + return (__s32)(timeout - nf_flowtable_time_stamp); +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -175,12 +175,10 @@ static void flow_offload_fixup_tcp(struc + tcp->seen[1].td_maxwin = 0; + } + +-#define NF_FLOWTABLE_TCP_PICKUP_TIMEOUT (120 * HZ) +-#define NF_FLOWTABLE_UDP_PICKUP_TIMEOUT (30 * HZ) +- + static void flow_offload_fixup_ct_timeout(struct nf_conn *ct) + { + const struct nf_conntrack_l4proto *l4proto; ++ struct net *net = nf_ct_net(ct); + int l4num = nf_ct_protonum(ct); + unsigned int timeout; + +@@ -188,12 +186,17 @@ static void flow_offload_fixup_ct_timeou + if (!l4proto) + return; + +- if (l4num == IPPROTO_TCP) +- timeout = NF_FLOWTABLE_TCP_PICKUP_TIMEOUT; +- else if (l4num == IPPROTO_UDP) +- timeout = NF_FLOWTABLE_UDP_PICKUP_TIMEOUT; +- else ++ if (l4num == IPPROTO_TCP) { ++ struct nf_tcp_net *tn = nf_tcp_pernet(net); ++ ++ timeout = tn->offload_pickup; ++ } else if (l4num == IPPROTO_UDP) { ++ struct nf_udp_net *tn = nf_udp_pernet(net); ++ ++ timeout = tn->offload_pickup; ++ } else { + return; ++ } + + if (nf_flow_timeout_delta(READ_ONCE(ct->timeout)) > (__s32)timeout) + WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout); +@@ -265,11 +268,35 @@ static const struct rhashtable_params nf + .automatic_shrinking = true, + }; + ++unsigned long flow_offload_get_timeout(struct flow_offload *flow) ++{ ++ const struct nf_conntrack_l4proto *l4proto; ++ unsigned long timeout = NF_FLOW_TIMEOUT; ++ struct net *net = nf_ct_net(flow->ct); ++ int l4num = nf_ct_protonum(flow->ct); ++ ++ l4proto = nf_ct_l4proto_find(l4num); ++ if (!l4proto) ++ return timeout; ++ ++ if (l4num == IPPROTO_TCP) { ++ struct nf_tcp_net *tn = nf_tcp_pernet(net); ++ ++ timeout = tn->offload_timeout; ++ } else if (l4num == IPPROTO_UDP) { ++ struct nf_udp_net *tn = nf_udp_pernet(net); ++ ++ timeout = tn->offload_timeout; ++ } ++ ++ return timeout; ++} ++ + int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow) + { + int err; + +- flow->timeout = nf_flowtable_time_stamp + NF_FLOW_TIMEOUT; ++ flow->timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow); + + err = rhashtable_insert_fast(&flow_table->rhashtable, + &flow->tuplehash[0].node, +@@ -301,7 +328,7 @@ EXPORT_SYMBOL_GPL(flow_offload_add); + void flow_offload_refresh(struct nf_flowtable *flow_table, + struct flow_offload *flow) + { +- flow->timeout = nf_flowtable_time_stamp + NF_FLOW_TIMEOUT; ++ flow->timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow); + + if (likely(!nf_flowtable_hw_offload(flow_table))) + return; +--- a/net/netfilter/nf_flow_table_offload.c ++++ b/net/netfilter/nf_flow_table_offload.c +@@ -885,7 +885,7 @@ static void flow_offload_work_stats(stru + + lastused = max_t(u64, stats[0].lastused, stats[1].lastused); + offload->flow->timeout = max_t(u64, offload->flow->timeout, +- lastused + NF_FLOW_TIMEOUT); ++ lastused + flow_offload_get_timeout(offload->flow)); + + if (offload->flowtable->flags & NF_FLOWTABLE_COUNTER) { + if (stats[0].pkts) +@@ -989,7 +989,7 @@ void nf_flow_offload_stats(struct nf_flo + __s32 delta; + + delta = nf_flow_timeout_delta(flow->timeout); +- if ((delta >= (9 * NF_FLOW_TIMEOUT) / 10)) ++ if ((delta >= (9 * flow_offload_get_timeout(flow)) / 10)) + return; + + offload = nf_flow_offload_work_alloc(flowtable, flow, FLOW_CLS_STATS); diff --git a/target/linux/generic/backport-5.15/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch b/target/linux/generic/backport-5.15/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch new file mode 100644 index 0000000000..289d140f34 --- /dev/null +++ b/target/linux/generic/backport-5.15/611-v5.12-net-ethernet-mediatek-support-setting-MTU.patch @@ -0,0 +1,138 @@ +From 4fd59792097a6b2fb949d41264386a7ecade469e Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Mon, 25 Jan 2021 12:20:46 +0800 +Subject: [PATCH] net: ethernet: mediatek: support setting MTU + +MT762x HW, except for MT7628, supports frame length up to 2048 +(maximum length on GDM), so allow setting MTU up to 2030. + +Also set the default frame length to the hardware default 1518. + +Signed-off-by: DENG Qingfang +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20210125042046.5599-1-dqfext@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 43 ++++++++++++++++++--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 ++++-- + 2 files changed, 47 insertions(+), 8 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -355,7 +355,7 @@ static void mtk_mac_config(struct phylin + /* Setup gmac */ + mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); + mcr_new = mcr_cur; +- mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | ++ mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | + MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK; + + /* Only update control register when needed! */ +@@ -782,8 +782,8 @@ static void mtk_get_stats64(struct net_d + static inline int mtk_max_frag_size(int mtu) + { + /* make sure buf_size will be at least MTK_MAX_RX_LENGTH */ +- if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH) +- mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; ++ if (mtu + MTK_RX_ETH_HLEN < MTK_MAX_RX_LENGTH_2K) ++ mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN; + + return SKB_DATA_ALIGN(MTK_RX_HLEN + mtu) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); +@@ -794,7 +794,7 @@ static inline int mtk_max_buf_size(int f + int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + +- WARN_ON(buf_size < MTK_MAX_RX_LENGTH); ++ WARN_ON(buf_size < MTK_MAX_RX_LENGTH_2K); + + return buf_size; + } +@@ -2606,6 +2606,35 @@ static void mtk_uninit(struct net_device + mtk_rx_irq_disable(eth, ~0); + } + ++static int mtk_change_mtu(struct net_device *dev, int new_mtu) ++{ ++ int length = new_mtu + MTK_RX_ETH_HLEN; ++ struct mtk_mac *mac = netdev_priv(dev); ++ struct mtk_eth *eth = mac->hw; ++ u32 mcr_cur, mcr_new; ++ ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) { ++ mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); ++ mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_MASK; ++ ++ if (length <= 1518) ++ mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1518); ++ else if (length <= 1536) ++ mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1536); ++ else if (length <= 1552) ++ mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1552); ++ else ++ mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_2048); ++ ++ if (mcr_new != mcr_cur) ++ mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id)); ++ } ++ ++ dev->mtu = new_mtu; ++ ++ return 0; ++} ++ + static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) + { + struct mtk_mac *mac = netdev_priv(dev); +@@ -2902,6 +2931,7 @@ static const struct net_device_ops mtk_n + .ndo_set_mac_address = mtk_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = mtk_do_ioctl, ++ .ndo_change_mtu = mtk_change_mtu, + .ndo_tx_timeout = mtk_tx_timeout, + .ndo_get_stats64 = mtk_get_stats64, + .ndo_fix_features = mtk_fix_features, +@@ -3004,7 +3034,10 @@ static int mtk_add_mac(struct mtk_eth *e + eth->netdev[id]->irq = eth->irq[0]; + eth->netdev[id]->dev.of_node = np; + +- eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) ++ eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; ++ else ++ eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN; + + return 0; + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -20,12 +20,13 @@ + #include "mtk_ppe.h" + + #define MTK_QDMA_PAGE_SIZE 2048 +-#define MTK_MAX_RX_LENGTH 1536 ++#define MTK_MAX_RX_LENGTH 1536 ++#define MTK_MAX_RX_LENGTH_2K 2048 + #define MTK_TX_DMA_BUF_LEN 0x3fff + #define MTK_DMA_SIZE 512 + #define MTK_NAPI_WEIGHT 64 + #define MTK_MAC_COUNT 2 +-#define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN) ++#define MTK_RX_ETH_HLEN (ETH_HLEN + ETH_FCS_LEN) + #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN) + #define MTK_DMA_DUMMY_DESC 0xffffffff + #define MTK_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \ +@@ -352,7 +353,12 @@ + + /* Mac control registers */ + #define MTK_MAC_MCR(x) (0x10100 + (x * 0x100)) +-#define MAC_MCR_MAX_RX_1536 BIT(24) ++#define MAC_MCR_MAX_RX_MASK GENMASK(25, 24) ++#define MAC_MCR_MAX_RX(_x) (MAC_MCR_MAX_RX_MASK & ((_x) << 24)) ++#define MAC_MCR_MAX_RX_1518 0x0 ++#define MAC_MCR_MAX_RX_1536 0x1 ++#define MAC_MCR_MAX_RX_1552 0x2 ++#define MAC_MCR_MAX_RX_2048 0x3 + #define MAC_MCR_IPG_CFG (BIT(18) | BIT(16)) + #define MAC_MCR_FORCE_MODE BIT(15) + #define MAC_MCR_TX_EN BIT(14) diff --git a/target/linux/generic/backport-5.15/705-net-phy-at803x-select-correct-page-on-config-init.patch b/target/linux/generic/backport-5.15/705-net-phy-at803x-select-correct-page-on-config-init.patch new file mode 100644 index 0000000000..00be403299 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-net-phy-at803x-select-correct-page-on-config-init.patch @@ -0,0 +1,108 @@ +From c329e5afb42ff0a88285eb4d8a391a18793e4777 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Thu, 15 Apr 2021 03:26:50 +0200 +Subject: [PATCH] net: phy: at803x: select correct page on config init + +The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber +as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit +in the chip configure register. + +The driver assumes the copper side is selected on probe, but this might +not be the case depending which page was last selected by the +bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior. + +Select the copper page when probing to circumvent this. + +Signed-off-by: David Bauer +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++++++++++++++++- + 1 file changed, 49 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -139,6 +139,9 @@ + #define ATH8035_PHY_ID 0x004dd072 + #define AT8030_PHY_ID_MASK 0xffffffef + ++#define AT803X_PAGE_FIBER 0 ++#define AT803X_PAGE_COPPER 1 ++ + MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); + MODULE_AUTHOR("Matus Ujhelyi"); + MODULE_LICENSE("GPL"); +@@ -190,6 +193,35 @@ static int at803x_debug_reg_mask(struct + return phy_write(phydev, AT803X_DEBUG_DATA, val); + } + ++static int at803x_write_page(struct phy_device *phydev, int page) ++{ ++ int mask; ++ int set; ++ ++ if (page == AT803X_PAGE_COPPER) { ++ set = AT803X_BT_BX_REG_SEL; ++ mask = 0; ++ } else { ++ set = 0; ++ mask = AT803X_BT_BX_REG_SEL; ++ } ++ ++ return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set); ++} ++ ++static int at803x_read_page(struct phy_device *phydev) ++{ ++ int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG); ++ ++ if (ccr < 0) ++ return ccr; ++ ++ if (ccr & AT803X_BT_BX_REG_SEL) ++ return AT803X_PAGE_COPPER; ++ ++ return AT803X_PAGE_FIBER; ++} ++ + static int at803x_enable_rx_delay(struct phy_device *phydev) + { + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, +@@ -508,6 +540,7 @@ static int at803x_probe(struct phy_devic + { + struct device *dev = &phydev->mdio.dev; + struct at803x_priv *priv; ++ int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) +@@ -515,7 +548,20 @@ static int at803x_probe(struct phy_devic + + phydev->priv = priv; + +- return at803x_parse_dt(phydev); ++ ret = at803x_parse_dt(phydev); ++ if (ret) ++ return ret; ++ ++ /* Some bootloaders leave the fiber page selected. ++ * Switch to the copper page, as otherwise we read ++ * the PHY capabilities from the fiber side. ++ */ ++ if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) { ++ ret = phy_select_page(phydev, AT803X_PAGE_COPPER); ++ ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret); ++ } ++ ++ return ret; + } + + static void at803x_remove(struct phy_device *phydev) +@@ -1097,6 +1143,8 @@ static struct phy_driver at803x_driver[] + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, ++ .read_page = at803x_read_page, ++ .write_page = at803x_write_page, + /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, + .aneg_done = at803x_aneg_done, diff --git a/target/linux/generic/backport-5.15/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch b/target/linux/generic/backport-5.15/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch new file mode 100644 index 0000000000..d6ec7450e8 --- /dev/null +++ b/target/linux/generic/backport-5.15/706-net-phy-at803x-fix-probe-error-if-copper-page-is-sel.patch @@ -0,0 +1,73 @@ +From 8f7e876273e294b732b42af2e5e6bba91d798954 Mon Sep 17 00:00:00 2001 +From: Michael Walle +Date: Tue, 20 Apr 2021 12:29:29 +0200 +Subject: [PATCH] net: phy: at803x: fix probe error if copper page is selected + +The commit c329e5afb42f ("net: phy: at803x: select correct page on +config init") selects the copper page during probe. This fails if the +copper page was already selected. In this case, the value of the copper +page (which is 1) is propagated through phy_restore_page() and is +finally returned for at803x_probe(). Fix it, by just using the +at803x_page_write() directly. + +Also in case of an error, the regulator is not disabled and leads to a +WARN_ON() when the probe fails. This couldn't happen before, because +at803x_parse_dt() was the last call in at803x_probe(). It is hard to +see, that the parse_dt() actually enables the regulator. Thus move the +regulator_enable() to the probe function and undo it in case of an +error. + +Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init") +Signed-off-by: Michael Walle +Reviewed-by: David Bauer +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 23 +++++++++++++++++------ + 1 file changed, 17 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -527,10 +527,6 @@ static int at803x_parse_dt(struct phy_de + phydev_err(phydev, "failed to get VDDIO regulator\n"); + return PTR_ERR(priv->vddio); + } +- +- ret = regulator_enable(priv->vddio); +- if (ret < 0) +- return ret; + } + + return 0; +@@ -552,15 +548,30 @@ static int at803x_probe(struct phy_devic + if (ret) + return ret; + ++ if (priv->vddio) { ++ ret = regulator_enable(priv->vddio); ++ if (ret < 0) ++ return ret; ++ } ++ + /* Some bootloaders leave the fiber page selected. + * Switch to the copper page, as otherwise we read + * the PHY capabilities from the fiber side. + */ + if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) { +- ret = phy_select_page(phydev, AT803X_PAGE_COPPER); +- ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret); ++ phy_lock_mdio_bus(phydev); ++ ret = at803x_write_page(phydev, AT803X_PAGE_COPPER); ++ phy_unlock_mdio_bus(phydev); ++ if (ret) ++ goto err; + } + ++ return 0; ++ ++err: ++ if (priv->vddio) ++ regulator_disable(priv->vddio); ++ + return ret; + } + diff --git a/target/linux/generic/backport-5.15/710-v5.12-net-phy-Add-100-base-x-mode.patch b/target/linux/generic/backport-5.15/710-v5.12-net-phy-Add-100-base-x-mode.patch new file mode 100644 index 0000000000..5c7f97ea90 --- /dev/null +++ b/target/linux/generic/backport-5.15/710-v5.12-net-phy-Add-100-base-x-mode.patch @@ -0,0 +1,56 @@ +From b1ae3587d16a8c8fc9453e147c8708d6f006ffbb Mon Sep 17 00:00:00 2001 +From: Bjarni Jonasson +Date: Wed, 13 Jan 2021 12:56:25 +0100 +Subject: [PATCH] net: phy: Add 100 base-x mode + +Sparx-5 supports this mode and it is missing in the PHY core. + +Signed-off-by: Bjarni Jonasson +Reviewed-by: Russell King +Signed-off-by: Jakub Kicinski +--- + Documentation/networking/phy.rst | 5 +++++ + include/linux/phy.h | 4 ++++ + 2 files changed, 9 insertions(+) + +--- a/Documentation/networking/phy.rst ++++ b/Documentation/networking/phy.rst +@@ -286,6 +286,11 @@ Some of the interface modes are describe + Note: due to legacy usage, some 10GBASE-R usage incorrectly makes + use of this definition. + ++``PHY_INTERFACE_MODE_100BASEX`` ++ This defines IEEE 802.3 Clause 24. The link operates at a fixed data ++ rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying ++ data rate of 100Mpbs. ++ + Pause frames / flow control + =========================== + +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -104,6 +104,7 @@ extern const int phy_10gbit_features_arr + * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax + * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII + * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII ++ * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX + * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX + * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX + * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI +@@ -135,6 +136,7 @@ typedef enum { + PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_QSGMII, + PHY_INTERFACE_MODE_TRGMII, ++ PHY_INTERFACE_MODE_100BASEX, + PHY_INTERFACE_MODE_1000BASEX, + PHY_INTERFACE_MODE_2500BASEX, + PHY_INTERFACE_MODE_RXAUI, +@@ -217,6 +219,8 @@ static inline const char *phy_modes(phy_ + return "usxgmii"; + case PHY_INTERFACE_MODE_10GKR: + return "10gbase-kr"; ++ case PHY_INTERFACE_MODE_100BASEX: ++ return "100base-x"; + default: + return "unknown"; + } diff --git a/target/linux/generic/backport-5.15/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch b/target/linux/generic/backport-5.15/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch new file mode 100644 index 0000000000..7d06c235d9 --- /dev/null +++ b/target/linux/generic/backport-5.15/711-v5.12-sfp-add-support-for-100-base-x-SFPs.patch @@ -0,0 +1,40 @@ +From 6e12f35cef6b8a458d7ecf507ae330e0bffaad8c Mon Sep 17 00:00:00 2001 +From: Bjarni Jonasson +Date: Wed, 13 Jan 2021 12:56:26 +0100 +Subject: [PATCH] sfp: add support for 100 base-x SFPs + +Add support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 modules +This is needed for Sparx-5 switch. + +Signed-off-by: Bjarni Jonasson +Reviewed-by: Russell King +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/sfp-bus.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -280,6 +280,12 @@ void sfp_parse_support(struct sfp_bus *b + br_min <= 1300 && br_max >= 1200) + phylink_set(modes, 1000baseX_Full); + ++ /* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */ ++ if (id->base.e100_base_fx || id->base.e100_base_lx) ++ phylink_set(modes, 100baseFX_Full); ++ if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) ++ phylink_set(modes, 100baseFX_Full); ++ + /* For active or passive cables, select the link modes + * based on the bit rates and the cable compliance bytes. + */ +@@ -399,6 +405,9 @@ phy_interface_t sfp_select_interface(str + if (phylink_test(link_modes, 1000baseX_Full)) + return PHY_INTERFACE_MODE_1000BASEX; + ++ if (phylink_test(link_modes, 100baseFX_Full)) ++ return PHY_INTERFACE_MODE_100BASEX; ++ + dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n"); + + return PHY_INTERFACE_MODE_NA; diff --git a/target/linux/generic/backport-5.15/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch b/target/linux/generic/backport-5.15/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch new file mode 100644 index 0000000000..278df46313 --- /dev/null +++ b/target/linux/generic/backport-5.15/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch @@ -0,0 +1,549 @@ +From 41d26bf4aba070dfd2ab48866cc27a48ee6228c7 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Tue, 20 Apr 2021 09:53:59 +0200 +Subject: [PATCH] net: phy: marvell: refactor HWMON OOP style +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use a structure of Marvell PHY specific HWMON methods to reduce code +duplication. Store a pointer to this structure into the PHY driver's +driver_data member. + +Signed-off-by: Marek Behún +Signed-off-by: David S. Miller +--- + drivers/net/phy/marvell.c | 369 +++++++++++++------------------------- + 1 file changed, 125 insertions(+), 244 deletions(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -2141,6 +2141,19 @@ static int marvell_vct7_cable_test_get_s + } + + #ifdef CONFIG_HWMON ++struct marvell_hwmon_ops { ++ int (*get_temp)(struct phy_device *phydev, long *temp); ++ int (*get_temp_critical)(struct phy_device *phydev, long *temp); ++ int (*set_temp_critical)(struct phy_device *phydev, long temp); ++ int (*get_temp_alarm)(struct phy_device *phydev, long *alarm); ++}; ++ ++static const struct marvell_hwmon_ops * ++to_marvell_hwmon_ops(const struct phy_device *phydev) ++{ ++ return phydev->drv->driver_data; ++} ++ + static int m88e1121_get_temp(struct phy_device *phydev, long *temp) + { + int oldpage; +@@ -2184,75 +2197,6 @@ error: + return phy_restore_page(phydev, oldpage, ret); + } + +-static int m88e1121_hwmon_read(struct device *dev, +- enum hwmon_sensor_types type, +- u32 attr, int channel, long *temp) +-{ +- struct phy_device *phydev = dev_get_drvdata(dev); +- int err; +- +- switch (attr) { +- case hwmon_temp_input: +- err = m88e1121_get_temp(phydev, temp); +- break; +- default: +- return -EOPNOTSUPP; +- } +- +- return err; +-} +- +-static umode_t m88e1121_hwmon_is_visible(const void *data, +- enum hwmon_sensor_types type, +- u32 attr, int channel) +-{ +- if (type != hwmon_temp) +- return 0; +- +- switch (attr) { +- case hwmon_temp_input: +- return 0444; +- default: +- return 0; +- } +-} +- +-static u32 m88e1121_hwmon_chip_config[] = { +- HWMON_C_REGISTER_TZ, +- 0 +-}; +- +-static const struct hwmon_channel_info m88e1121_hwmon_chip = { +- .type = hwmon_chip, +- .config = m88e1121_hwmon_chip_config, +-}; +- +-static u32 m88e1121_hwmon_temp_config[] = { +- HWMON_T_INPUT, +- 0 +-}; +- +-static const struct hwmon_channel_info m88e1121_hwmon_temp = { +- .type = hwmon_temp, +- .config = m88e1121_hwmon_temp_config, +-}; +- +-static const struct hwmon_channel_info *m88e1121_hwmon_info[] = { +- &m88e1121_hwmon_chip, +- &m88e1121_hwmon_temp, +- NULL +-}; +- +-static const struct hwmon_ops m88e1121_hwmon_hwmon_ops = { +- .is_visible = m88e1121_hwmon_is_visible, +- .read = m88e1121_hwmon_read, +-}; +- +-static const struct hwmon_chip_info m88e1121_hwmon_chip_info = { +- .ops = &m88e1121_hwmon_hwmon_ops, +- .info = m88e1121_hwmon_info, +-}; +- + static int m88e1510_get_temp(struct phy_device *phydev, long *temp) + { + int ret; +@@ -2315,92 +2259,6 @@ static int m88e1510_get_temp_alarm(struc + return 0; + } + +-static int m88e1510_hwmon_read(struct device *dev, +- enum hwmon_sensor_types type, +- u32 attr, int channel, long *temp) +-{ +- struct phy_device *phydev = dev_get_drvdata(dev); +- int err; +- +- switch (attr) { +- case hwmon_temp_input: +- err = m88e1510_get_temp(phydev, temp); +- break; +- case hwmon_temp_crit: +- err = m88e1510_get_temp_critical(phydev, temp); +- break; +- case hwmon_temp_max_alarm: +- err = m88e1510_get_temp_alarm(phydev, temp); +- break; +- default: +- return -EOPNOTSUPP; +- } +- +- return err; +-} +- +-static int m88e1510_hwmon_write(struct device *dev, +- enum hwmon_sensor_types type, +- u32 attr, int channel, long temp) +-{ +- struct phy_device *phydev = dev_get_drvdata(dev); +- int err; +- +- switch (attr) { +- case hwmon_temp_crit: +- err = m88e1510_set_temp_critical(phydev, temp); +- break; +- default: +- return -EOPNOTSUPP; +- } +- return err; +-} +- +-static umode_t m88e1510_hwmon_is_visible(const void *data, +- enum hwmon_sensor_types type, +- u32 attr, int channel) +-{ +- if (type != hwmon_temp) +- return 0; +- +- switch (attr) { +- case hwmon_temp_input: +- case hwmon_temp_max_alarm: +- return 0444; +- case hwmon_temp_crit: +- return 0644; +- default: +- return 0; +- } +-} +- +-static u32 m88e1510_hwmon_temp_config[] = { +- HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_MAX_ALARM, +- 0 +-}; +- +-static const struct hwmon_channel_info m88e1510_hwmon_temp = { +- .type = hwmon_temp, +- .config = m88e1510_hwmon_temp_config, +-}; +- +-static const struct hwmon_channel_info *m88e1510_hwmon_info[] = { +- &m88e1121_hwmon_chip, +- &m88e1510_hwmon_temp, +- NULL +-}; +- +-static const struct hwmon_ops m88e1510_hwmon_hwmon_ops = { +- .is_visible = m88e1510_hwmon_is_visible, +- .read = m88e1510_hwmon_read, +- .write = m88e1510_hwmon_write, +-}; +- +-static const struct hwmon_chip_info m88e1510_hwmon_chip_info = { +- .ops = &m88e1510_hwmon_hwmon_ops, +- .info = m88e1510_hwmon_info, +-}; +- + static int m88e6390_get_temp(struct phy_device *phydev, long *temp) + { + int sum = 0; +@@ -2459,63 +2317,112 @@ error: + return ret; + } + +-static int m88e6390_hwmon_read(struct device *dev, +- enum hwmon_sensor_types type, +- u32 attr, int channel, long *temp) ++static int marvell_hwmon_read(struct device *dev, enum hwmon_sensor_types type, ++ u32 attr, int channel, long *temp) + { + struct phy_device *phydev = dev_get_drvdata(dev); +- int err; ++ const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev); ++ int err = -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_input: +- err = m88e6390_get_temp(phydev, temp); ++ if (ops->get_temp) ++ err = ops->get_temp(phydev, temp); ++ break; ++ case hwmon_temp_crit: ++ if (ops->get_temp_critical) ++ err = ops->get_temp_critical(phydev, temp); ++ break; ++ case hwmon_temp_max_alarm: ++ if (ops->get_temp_alarm) ++ err = ops->get_temp_alarm(phydev, temp); ++ break; ++ } ++ ++ return err; ++} ++ ++static int marvell_hwmon_write(struct device *dev, enum hwmon_sensor_types type, ++ u32 attr, int channel, long temp) ++{ ++ struct phy_device *phydev = dev_get_drvdata(dev); ++ const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev); ++ int err = -EOPNOTSUPP; ++ ++ switch (attr) { ++ case hwmon_temp_crit: ++ if (ops->set_temp_critical) ++ err = ops->set_temp_critical(phydev, temp); + break; + default: +- return -EOPNOTSUPP; ++ fallthrough; + } + + return err; + } + +-static umode_t m88e6390_hwmon_is_visible(const void *data, +- enum hwmon_sensor_types type, +- u32 attr, int channel) ++static umode_t marvell_hwmon_is_visible(const void *data, ++ enum hwmon_sensor_types type, ++ u32 attr, int channel) + { ++ const struct phy_device *phydev = data; ++ const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev); ++ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: +- return 0444; ++ return ops->get_temp ? 0444 : 0; ++ case hwmon_temp_max_alarm: ++ return ops->get_temp_alarm ? 0444 : 0; ++ case hwmon_temp_crit: ++ return (ops->get_temp_critical ? 0444 : 0) | ++ (ops->set_temp_critical ? 0200 : 0); + default: + return 0; + } + } + +-static u32 m88e6390_hwmon_temp_config[] = { +- HWMON_T_INPUT, ++static u32 marvell_hwmon_chip_config[] = { ++ HWMON_C_REGISTER_TZ, + 0 + }; + +-static const struct hwmon_channel_info m88e6390_hwmon_temp = { ++static const struct hwmon_channel_info marvell_hwmon_chip = { ++ .type = hwmon_chip, ++ .config = marvell_hwmon_chip_config, ++}; ++ ++/* we can define HWMON_T_CRIT and HWMON_T_MAX_ALARM even though these are not ++ * defined for all PHYs, because the hwmon code checks whether the attributes ++ * exists via the .is_visible method ++ */ ++static u32 marvell_hwmon_temp_config[] = { ++ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_MAX_ALARM, ++ 0 ++}; ++ ++static const struct hwmon_channel_info marvell_hwmon_temp = { + .type = hwmon_temp, +- .config = m88e6390_hwmon_temp_config, ++ .config = marvell_hwmon_temp_config, + }; + +-static const struct hwmon_channel_info *m88e6390_hwmon_info[] = { +- &m88e1121_hwmon_chip, +- &m88e6390_hwmon_temp, ++static const struct hwmon_channel_info *marvell_hwmon_info[] = { ++ &marvell_hwmon_chip, ++ &marvell_hwmon_temp, + NULL + }; + +-static const struct hwmon_ops m88e6390_hwmon_hwmon_ops = { +- .is_visible = m88e6390_hwmon_is_visible, +- .read = m88e6390_hwmon_read, ++static const struct hwmon_ops marvell_hwmon_hwmon_ops = { ++ .is_visible = marvell_hwmon_is_visible, ++ .read = marvell_hwmon_read, ++ .write = marvell_hwmon_write, + }; + +-static const struct hwmon_chip_info m88e6390_hwmon_chip_info = { +- .ops = &m88e6390_hwmon_hwmon_ops, +- .info = m88e6390_hwmon_info, ++static const struct hwmon_chip_info marvell_hwmon_chip_info = { ++ .ops = &marvell_hwmon_hwmon_ops, ++ .info = marvell_hwmon_info, + }; + + static int marvell_hwmon_name(struct phy_device *phydev) +@@ -2538,49 +2445,48 @@ static int marvell_hwmon_name(struct phy + return 0; + } + +-static int marvell_hwmon_probe(struct phy_device *phydev, +- const struct hwmon_chip_info *chip) ++static int marvell_hwmon_probe(struct phy_device *phydev) + { ++ const struct marvell_hwmon_ops *ops = to_marvell_hwmon_ops(phydev); + struct marvell_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int err; + ++ if (!ops) ++ return 0; ++ + err = marvell_hwmon_name(phydev); + if (err) + return err; + + priv->hwmon_dev = devm_hwmon_device_register_with_info( +- dev, priv->hwmon_name, phydev, chip, NULL); ++ dev, priv->hwmon_name, phydev, &marvell_hwmon_chip_info, NULL); + + return PTR_ERR_OR_ZERO(priv->hwmon_dev); + } + +-static int m88e1121_hwmon_probe(struct phy_device *phydev) +-{ +- return marvell_hwmon_probe(phydev, &m88e1121_hwmon_chip_info); +-} ++static const struct marvell_hwmon_ops m88e1121_hwmon_ops = { ++ .get_temp = m88e1121_get_temp, ++}; + +-static int m88e1510_hwmon_probe(struct phy_device *phydev) +-{ +- return marvell_hwmon_probe(phydev, &m88e1510_hwmon_chip_info); +-} ++static const struct marvell_hwmon_ops m88e1510_hwmon_ops = { ++ .get_temp = m88e1510_get_temp, ++ .get_temp_critical = m88e1510_get_temp_critical, ++ .set_temp_critical = m88e1510_set_temp_critical, ++ .get_temp_alarm = m88e1510_get_temp_alarm, ++}; ++ ++static const struct marvell_hwmon_ops m88e6390_hwmon_ops = { ++ .get_temp = m88e6390_get_temp, ++}; ++ ++#define DEF_MARVELL_HWMON_OPS(s) (&(s)) + +-static int m88e6390_hwmon_probe(struct phy_device *phydev) +-{ +- return marvell_hwmon_probe(phydev, &m88e6390_hwmon_chip_info); +-} + #else +-static int m88e1121_hwmon_probe(struct phy_device *phydev) +-{ +- return 0; +-} + +-static int m88e1510_hwmon_probe(struct phy_device *phydev) +-{ +- return 0; +-} ++#define DEF_MARVELL_HWMON_OPS(s) NULL + +-static int m88e6390_hwmon_probe(struct phy_device *phydev) ++static int marvell_hwmon_probe(struct phy_device *phydev) + { + return 0; + } +@@ -2596,40 +2502,7 @@ static int marvell_probe(struct phy_devi + + phydev->priv = priv; + +- return 0; +-} +- +-static int m88e1121_probe(struct phy_device *phydev) +-{ +- int err; +- +- err = marvell_probe(phydev); +- if (err) +- return err; +- +- return m88e1121_hwmon_probe(phydev); +-} +- +-static int m88e1510_probe(struct phy_device *phydev) +-{ +- int err; +- +- err = marvell_probe(phydev); +- if (err) +- return err; +- +- return m88e1510_hwmon_probe(phydev); +-} +- +-static int m88e6390_probe(struct phy_device *phydev) +-{ +- int err; +- +- err = marvell_probe(phydev); +- if (err) +- return err; +- +- return m88e6390_hwmon_probe(phydev); ++ return marvell_hwmon_probe(phydev); + } + + static struct phy_driver marvell_drivers[] = { +@@ -2714,8 +2587,9 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1121R, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1121R", ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1121_hwmon_ops), + /* PHY_GBIT_FEATURES */ +- .probe = m88e1121_probe, ++ .probe = marvell_probe, + .config_init = marvell_config_init, + .config_aneg = m88e1121_config_aneg, + .read_status = marvell_read_status, +@@ -2834,9 +2708,10 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1510, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1510", ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), + .features = PHY_GBIT_FIBRE_FEATURES, + .flags = PHY_POLL_CABLE_TEST, +- .probe = m88e1510_probe, ++ .probe = marvell_probe, + .config_init = m88e1510_config_init, + .config_aneg = m88e1510_config_aneg, + .read_status = marvell_read_status, +@@ -2863,9 +2738,10 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1540, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1540", ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), + /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, +- .probe = m88e1510_probe, ++ .probe = marvell_probe, + .config_init = marvell_config_init, + .config_aneg = m88e1510_config_aneg, + .read_status = marvell_read_status, +@@ -2889,7 +2765,8 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1545, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1545", +- .probe = m88e1510_probe, ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), ++ .probe = marvell_probe, + /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, + .config_init = marvell_config_init, +@@ -2935,9 +2812,10 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E6341_FAMILY, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E6341 Family", ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), + /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, +- .probe = m88e1510_probe, ++ .probe = marvell_probe, + .config_init = marvell_config_init, + .config_aneg = m88e6390_config_aneg, + .read_status = marvell_read_status, +@@ -2961,9 +2839,10 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E6390_FAMILY, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E6390 Family", ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e6390_hwmon_ops), + /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, +- .probe = m88e6390_probe, ++ .probe = marvell_probe, + .config_init = marvell_config_init, + .config_aneg = m88e6390_config_aneg, + .read_status = marvell_read_status, +@@ -2987,7 +2866,8 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1340S, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1340S", +- .probe = m88e1510_probe, ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), ++ .probe = marvell_probe, + /* PHY_GBIT_FEATURES */ + .config_init = marvell_config_init, + .config_aneg = m88e1510_config_aneg, +@@ -3009,7 +2889,8 @@ static struct phy_driver marvell_drivers + .phy_id = MARVELL_PHY_ID_88E1548P, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1548P", +- .probe = m88e1510_probe, ++ .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), ++ .probe = marvell_probe, + .features = PHY_GBIT_FIBRE_FEATURES, + .config_init = marvell_config_init, + .config_aneg = m88e1510_config_aneg, diff --git a/target/linux/generic/backport-5.15/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch b/target/linux/generic/backport-5.15/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch new file mode 100644 index 0000000000..b86e9bf640 --- /dev/null +++ b/target/linux/generic/backport-5.15/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch @@ -0,0 +1,161 @@ +From b697d9d38a5a5ab405d7cc4743d39fe2c5d7517c Mon Sep 17 00:00:00 2001 +From: Ivan Bornyakov +Date: Thu, 12 Aug 2021 16:42:56 +0300 +Subject: [PATCH] net: phy: marvell: add SFP support for 88E1510 + +Add support for SFP cages connected to the Marvell 88E1512 transceiver. +88E1512 supports for SGMII/1000Base-X/100Base-FX media type with RGMII +on system interface. Configure PHY to appropriate mode depending on the +type of SFP inserted. On SFP removal configure PHY to the RGMII-copper +mode so RJ-45 port can still work. + +Signed-off-by: Ivan Bornyakov +Link: https://lore.kernel.org/r/20210812134256.2436-1-i.bornyakov@metrotek.ru +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/marvell.c | 105 +++++++++++++++++++++++++++++++++++++- + 1 file changed, 104 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -32,6 +32,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -46,6 +47,7 @@ + #define MII_MARVELL_MISC_TEST_PAGE 0x06 + #define MII_MARVELL_VCT7_PAGE 0x07 + #define MII_MARVELL_WOL_PAGE 0x11 ++#define MII_MARVELL_MODE_PAGE 0x12 + + #define MII_M1011_IEVENT 0x13 + #define MII_M1011_IEVENT_CLEAR 0x0000 +@@ -162,7 +164,14 @@ + + #define MII_88E1510_GEN_CTRL_REG_1 0x14 + #define MII_88E1510_GEN_CTRL_REG_1_MODE_MASK 0x7 ++#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII 0x0 /* RGMII to copper */ + #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */ ++/* RGMII to 1000BASE-X */ ++#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X 0x2 ++/* RGMII to 100BASE-FX */ ++#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX 0x3 ++/* RGMII to SGMII */ ++#define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII 0x4 + #define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */ + + #define MII_VCT5_TX_RX_MDI0_COUPLING 0x10 +@@ -2505,6 +2514,100 @@ static int marvell_probe(struct phy_devi + return marvell_hwmon_probe(phydev); + } + ++static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) ++{ ++ struct phy_device *phydev = upstream; ++ phy_interface_t interface; ++ struct device *dev; ++ int oldpage; ++ int ret = 0; ++ u16 mode; ++ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; ++ ++ dev = &phydev->mdio.dev; ++ ++ sfp_parse_support(phydev->sfp_bus, id, supported); ++ interface = sfp_select_interface(phydev->sfp_bus, supported); ++ ++ dev_info(dev, "%s SFP module inserted\n", phy_modes(interface)); ++ ++ switch (interface) { ++ case PHY_INTERFACE_MODE_1000BASEX: ++ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_1000X; ++ ++ break; ++ case PHY_INTERFACE_MODE_100BASEX: ++ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_100FX; ++ ++ break; ++ case PHY_INTERFACE_MODE_SGMII: ++ mode = MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII; ++ ++ break; ++ default: ++ dev_err(dev, "Incompatible SFP module inserted\n"); ++ ++ return -EINVAL; ++ } ++ ++ oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE); ++ if (oldpage < 0) ++ goto error; ++ ++ ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, ++ MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, mode); ++ if (ret < 0) ++ goto error; ++ ++ ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1, ++ MII_88E1510_GEN_CTRL_REG_1_RESET); ++ ++error: ++ return phy_restore_page(phydev, oldpage, ret); ++} ++ ++static void m88e1510_sfp_remove(void *upstream) ++{ ++ struct phy_device *phydev = upstream; ++ int oldpage; ++ int ret = 0; ++ ++ oldpage = phy_select_page(phydev, MII_MARVELL_MODE_PAGE); ++ if (oldpage < 0) ++ goto error; ++ ++ ret = __phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, ++ MII_88E1510_GEN_CTRL_REG_1_MODE_MASK, ++ MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII); ++ if (ret < 0) ++ goto error; ++ ++ ret = __phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1, ++ MII_88E1510_GEN_CTRL_REG_1_RESET); ++ ++error: ++ phy_restore_page(phydev, oldpage, ret); ++} ++ ++static const struct sfp_upstream_ops m88e1510_sfp_ops = { ++ .module_insert = m88e1510_sfp_insert, ++ .module_remove = m88e1510_sfp_remove, ++ .attach = phy_sfp_attach, ++ .detach = phy_sfp_detach, ++}; ++ ++static int m88e1510_probe(struct phy_device *phydev) ++{ ++ int err; ++ ++ err = marvell_probe(phydev); ++ if (err) ++ return err; ++ ++ return phy_sfp_probe(phydev, &m88e1510_sfp_ops); ++} ++ + static struct phy_driver marvell_drivers[] = { + { + .phy_id = MARVELL_PHY_ID_88E1101, +@@ -2711,7 +2814,7 @@ static struct phy_driver marvell_drivers + .driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops), + .features = PHY_GBIT_FIBRE_FEATURES, + .flags = PHY_POLL_CABLE_TEST, +- .probe = marvell_probe, ++ .probe = m88e1510_probe, + .config_init = m88e1510_config_init, + .config_aneg = m88e1510_config_aneg, + .read_status = marvell_read_status, diff --git a/target/linux/generic/backport-5.15/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch b/target/linux/generic/backport-5.15/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch new file mode 100644 index 0000000000..3b630377f9 --- /dev/null +++ b/target/linux/generic/backport-5.15/719-v5.12-net-dsa-automatically-bring-up-DSA-master-when-openi.patch @@ -0,0 +1,85 @@ +From 9d5ef190e5615a7b63af89f88c4106a5bc127974 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Fri, 5 Feb 2021 15:37:10 +0200 +Subject: [PATCH] net: dsa: automatically bring up DSA master when opening user + port + +DSA wants the master interface to be open before the user port is due to +historical reasons. The promiscuity of interfaces that are down used to +have issues, as referenced Lennert Buytenhek in commit df02c6ff2e39 +("dsa: fix master interface allmulti/promisc handling"). + +The bugfix mentioned there, commit b6c40d68ff64 ("net: only invoke +dev->change_rx_flags when device is UP"), was basically a "don't do +that" approach to working around the promiscuity while down issue. + +Further work done by Vlad Yasevich in commit d2615bf45069 ("net: core: +Always propagate flag changes to interfaces") has resolved the +underlying issue, and it is strictly up to the DSA and 8021q drivers +now, it is no longer mandated by the networking core that the master +interface must be up when changing its promiscuity. + +From DSA's point of view, deciding to error out in dsa_slave_open +because the master isn't up is +(a) a bad user experience and +(b) knocking at an open door. +Even if there still was an issue with promiscuity while down, DSA could +still just open the master and avoid it. + +Doing it this way has the additional benefit that user space can now +remove DSA-specific workarounds, like systemd-networkd with BindCarrier: +https://github.com/systemd/systemd/issues/7478 + +And we can finally remove one of the 2 bullets in the "Common pitfalls +using DSA setups" chapter. + +Tested with two cascaded DSA switches: + +$ ip link set sw0p2 up +fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode +fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx +mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode +mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off +8021q: adding VLAN 0 to HW filter on device swp0 +sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode +IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready +IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready + +Signed-off-by: Vladimir Oltean +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + Documentation/networking/dsa/dsa.rst | 4 ---- + net/dsa/slave.c | 7 +++++-- + 2 files changed, 5 insertions(+), 6 deletions(-) + +--- a/Documentation/networking/dsa/dsa.rst ++++ b/Documentation/networking/dsa/dsa.rst +@@ -273,10 +273,6 @@ will not make us go through the switch t + the Ethernet switch on the other end, expecting a tag will typically drop this + frame. + +-Slave network devices check that the master network device is UP before allowing +-you to administratively bring UP these slave network devices. A common +-configuration mistake is forgetting to bring UP the master network device first. +- + Interactions with other subsystems + ================================== + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -68,8 +68,11 @@ static int dsa_slave_open(struct net_dev + struct dsa_port *dp = dsa_slave_to_port(dev); + int err; + +- if (!(master->flags & IFF_UP)) +- return -ENETDOWN; ++ err = dev_open(master, NULL); ++ if (err < 0) { ++ netdev_err(dev, "failed to open master %s\n", master->name); ++ goto out; ++ } + + if (!ether_addr_equal(dev->dev_addr, master->dev_addr)) { + err = dev_uc_add(master, dev->dev_addr); diff --git a/target/linux/generic/backport-5.15/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch b/target/linux/generic/backport-5.15/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch new file mode 100644 index 0000000000..c43cb4d1f2 --- /dev/null +++ b/target/linux/generic/backport-5.15/720-v5.12-net-bridge-notify-switchdev-of-disappearance-of-old-.patch @@ -0,0 +1,126 @@ +From 90dc8fd36078a536671adae884d0b929cce6480a Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:30 +0200 +Subject: [PATCH] net: bridge: notify switchdev of disappearance of old FDB + entry upon migration + +Currently the bridge emits atomic switchdev notifications for +dynamically learnt FDB entries. Monitoring these notifications works +wonders for switchdev drivers that want to keep their hardware FDB in +sync with the bridge's FDB. + +For example station A wants to talk to station B in the diagram below, +and we are concerned with the behavior of the bridge on the DUT device: + + DUT + +-------------------------------------+ + | br0 | + | +------+ +------+ +------+ +------+ | + | | | | | | | | | | + | | swp0 | | swp1 | | swp2 | | eth0 | | + +-------------------------------------+ + | | | + Station A | | + | | + +--+------+--+ +--+------+--+ + | | | | | | | | + | | swp0 | | | | swp0 | | + Another | +------+ | | +------+ | Another + switch | br0 | | br0 | switch + | +------+ | | +------+ | + | | | | | | | | + | | swp1 | | | | swp1 | | + +--+------+--+ +--+------+--+ + | + Station B + +Interfaces swp0, swp1, swp2 are handled by a switchdev driver that has +the following property: frames injected from its control interface bypass +the internal address analyzer logic, and therefore, this hardware does +not learn from the source address of packets transmitted by the network +stack through it. So, since bridging between eth0 (where Station B is +attached) and swp0 (where Station A is attached) is done in software, +the switchdev hardware will never learn the source address of Station B. +So the traffic towards that destination will be treated as unknown, i.e. +flooded. + +This is where the bridge notifications come in handy. When br0 on the +DUT sees frames with Station B's MAC address on eth0, the switchdev +driver gets these notifications and can install a rule to send frames +towards Station B's address that are incoming from swp0, swp1, swp2, +only towards the control interface. This is all switchdev driver private +business, which the notification makes possible. + +All is fine until someone unplugs Station B's cable and moves it to the +other switch: + + DUT + +-------------------------------------+ + | br0 | + | +------+ +------+ +------+ +------+ | + | | | | | | | | | | + | | swp0 | | swp1 | | swp2 | | eth0 | | + +-------------------------------------+ + | | | + Station A | | + | | + +--+------+--+ +--+------+--+ + | | | | | | | | + | | swp0 | | | | swp0 | | + Another | +------+ | | +------+ | Another + switch | br0 | | br0 | switch + | +------+ | | +------+ | + | | | | | | | | + | | swp1 | | | | swp1 | | + +--+------+--+ +--+------+--+ + | + Station B + +Luckily for the use cases we care about, Station B is noisy enough that +the DUT hears it (on swp1 this time). swp1 receives the frames and +delivers them to the bridge, who enters the unlikely path in br_fdb_update +of updating an existing entry. It moves the entry in the software bridge +to swp1 and emits an addition notification towards that. + +As far as the switchdev driver is concerned, all that it needs to ensure +is that traffic between Station A and Station B is not forever broken. +If it does nothing, then the stale rule to send frames for Station B +towards the control interface remains in place. But Station B is no +longer reachable via the control interface, but via a port that can +offload the bridge port learning attribute. It's just that the port is +prevented from learning this address, since the rule overrides FDB +updates. So the rule needs to go. The question is via what mechanism. + +It sure would be possible for this switchdev driver to keep track of all +addresses which are sent to the control interface, and then also listen +for bridge notifier events on its own ports, searching for the ones that +have a MAC address which was previously sent to the control interface. +But this is cumbersome and inefficient. Instead, with one small change, +the bridge could notify of the address deletion from the old port, in a +symmetrical manner with how it did for the insertion. Then the switchdev +driver would not be required to monitor learn/forget events for its own +ports. It could just delete the rule towards the control interface upon +bridge entry migration. This would make hardware address learning be +possible again. Then it would take a few more packets until the hardware +and software FDB would be in sync again. + +Signed-off-by: Vladimir Oltean +Acked-by: Nikolay Aleksandrov +Reviewed-by: Ido Schimmel +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + net/bridge/br_fdb.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/net/bridge/br_fdb.c ++++ b/net/bridge/br_fdb.c +@@ -602,6 +602,7 @@ void br_fdb_update(struct net_bridge *br + /* fastpath: update of existing entry */ + if (unlikely(source != fdb->dst && + !test_bit(BR_FDB_STICKY, &fdb->flags))) { ++ br_switchdev_fdb_notify(fdb, RTM_DELNEIGH); + fdb->dst = source; + fdb_modified = true; + /* Take over HW learned entry */ diff --git a/target/linux/generic/backport-5.15/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch b/target/linux/generic/backport-5.15/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch new file mode 100644 index 0000000000..f9337590f7 --- /dev/null +++ b/target/linux/generic/backport-5.15/721-v5.12-net-dsa-be-louder-when-a-non-legacy-FDB-operation-fa.patch @@ -0,0 +1,52 @@ +From 2fd186501b1cff155cc4a755c210793cfc0dffb5 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:31 +0200 +Subject: [PATCH] net: dsa: be louder when a non-legacy FDB operation fails + +The dev_close() call was added in commit c9eb3e0f8701 ("net: dsa: Add +support for learning FDB through notification") "to indicate inconsistent +situation" when we could not delete an FDB entry from the port. + +bridge fdb del d8:58:d7:00:ca:6d dev swp0 self master + +It is a bit drastic and at the same time not helpful if the above fails +to only print with netdev_dbg log level, but on the other hand to bring +the interface down. + +So increase the verbosity of the error message, and drop dev_close(). + +Signed-off-by: Vladimir Oltean +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + net/dsa/slave.c | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2112,7 +2112,9 @@ static void dsa_slave_switchdev_event_wo + + err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid); + if (err) { +- netdev_dbg(dev, "fdb add failed err=%d\n", err); ++ netdev_err(dev, ++ "failed to add %pM vid %d to fdb: %d\n", ++ fdb_info->addr, fdb_info->vid, err); + break; + } + fdb_info->offloaded = true; +@@ -2127,9 +2129,11 @@ static void dsa_slave_switchdev_event_wo + + err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid); + if (err) { +- netdev_dbg(dev, "fdb del failed err=%d\n", err); +- dev_close(dev); ++ netdev_err(dev, ++ "failed to delete %pM vid %d from fdb: %d\n", ++ fdb_info->addr, fdb_info->vid, err); + } ++ + break; + } + rtnl_unlock(); diff --git a/target/linux/generic/backport-5.15/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch b/target/linux/generic/backport-5.15/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch new file mode 100644 index 0000000000..c1aa8fda82 --- /dev/null +++ b/target/linux/generic/backport-5.15/722-v5.12-net-dsa-don-t-use-switchdev_notifier_fdb_info-in-dsa.patch @@ -0,0 +1,226 @@ +From c4bb76a9a0ef87c4cc1f636defed5f12deb9f5a7 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:32 +0200 +Subject: [PATCH] net: dsa: don't use switchdev_notifier_fdb_info in + dsa_switchdev_event_work + +Currently DSA doesn't add FDB entries on the CPU port, because it only +does so through switchdev, which is associated with a net_device, and +there are none of those for the CPU port. + +But actually FDB addresses on the CPU port have some use cases of their +own, if the switchdev operations are initiated from within the DSA +layer. There is just one problem with the existing code: it passes a +structure in dsa_switchdev_event_work which was retrieved directly from +switchdev, so it contains a net_device. We need to generalize the +contents to something that covers the CPU port as well: the "ds, port" +tuple is fine for that. + +Note that the new procedure for notifying the successful FDB offload is +inspired from the rocker model. + +Also, nothing was being done if added_by_user was false. Let's check for +that a lot earlier, and don't actually bother to schedule the worker +for nothing. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + net/dsa/dsa_priv.h | 12 +++++ + net/dsa/slave.c | 106 ++++++++++++++++++++++----------------------- + 2 files changed, 65 insertions(+), 53 deletions(-) + +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -73,6 +73,18 @@ struct dsa_notifier_mtu_info { + int mtu; + }; + ++struct dsa_switchdev_event_work { ++ struct dsa_switch *ds; ++ int port; ++ struct work_struct work; ++ unsigned long event; ++ /* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and ++ * SWITCHDEV_FDB_DEL_TO_DEVICE ++ */ ++ unsigned char addr[ETH_ALEN]; ++ u16 vid; ++}; ++ + struct dsa_slave_priv { + /* Copy of CPU port xmit for faster access in slave transmit hot path */ + struct sk_buff * (*xmit)(struct sk_buff *skb, +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2087,76 +2087,66 @@ static int dsa_slave_netdevice_event(str + return NOTIFY_DONE; + } + +-struct dsa_switchdev_event_work { +- struct work_struct work; +- struct switchdev_notifier_fdb_info fdb_info; +- struct net_device *dev; +- unsigned long event; +-}; ++static void ++dsa_fdb_offload_notify(struct dsa_switchdev_event_work *switchdev_work) ++{ ++ struct dsa_switch *ds = switchdev_work->ds; ++ struct switchdev_notifier_fdb_info info; ++ struct dsa_port *dp; ++ ++ if (!dsa_is_user_port(ds, switchdev_work->port)) ++ return; ++ ++ info.addr = switchdev_work->addr; ++ info.vid = switchdev_work->vid; ++ info.offloaded = true; ++ dp = dsa_to_port(ds, switchdev_work->port); ++ call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED, ++ dp->slave, &info.info, NULL); ++} + + static void dsa_slave_switchdev_event_work(struct work_struct *work) + { + struct dsa_switchdev_event_work *switchdev_work = + container_of(work, struct dsa_switchdev_event_work, work); +- struct net_device *dev = switchdev_work->dev; +- struct switchdev_notifier_fdb_info *fdb_info; +- struct dsa_port *dp = dsa_slave_to_port(dev); ++ struct dsa_switch *ds = switchdev_work->ds; ++ struct dsa_port *dp; + int err; + ++ dp = dsa_to_port(ds, switchdev_work->port); ++ + rtnl_lock(); + switch (switchdev_work->event) { + case SWITCHDEV_FDB_ADD_TO_DEVICE: +- fdb_info = &switchdev_work->fdb_info; +- if (!fdb_info->added_by_user) +- break; +- +- err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid); ++ err = dsa_port_fdb_add(dp, switchdev_work->addr, ++ switchdev_work->vid); + if (err) { +- netdev_err(dev, +- "failed to add %pM vid %d to fdb: %d\n", +- fdb_info->addr, fdb_info->vid, err); ++ dev_err(ds->dev, ++ "port %d failed to add %pM vid %d to fdb: %d\n", ++ dp->index, switchdev_work->addr, ++ switchdev_work->vid, err); + break; + } +- fdb_info->offloaded = true; +- call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED, dev, +- &fdb_info->info, NULL); ++ dsa_fdb_offload_notify(switchdev_work); + break; + + case SWITCHDEV_FDB_DEL_TO_DEVICE: +- fdb_info = &switchdev_work->fdb_info; +- if (!fdb_info->added_by_user) +- break; +- +- err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid); ++ err = dsa_port_fdb_del(dp, switchdev_work->addr, ++ switchdev_work->vid); + if (err) { +- netdev_err(dev, +- "failed to delete %pM vid %d from fdb: %d\n", +- fdb_info->addr, fdb_info->vid, err); ++ dev_err(ds->dev, ++ "port %d failed to delete %pM vid %d from fdb: %d\n", ++ dp->index, switchdev_work->addr, ++ switchdev_work->vid, err); + } + + break; + } + rtnl_unlock(); + +- kfree(switchdev_work->fdb_info.addr); + kfree(switchdev_work); +- dev_put(dev); +-} +- +-static int +-dsa_slave_switchdev_fdb_work_init(struct dsa_switchdev_event_work * +- switchdev_work, +- const struct switchdev_notifier_fdb_info * +- fdb_info) +-{ +- memcpy(&switchdev_work->fdb_info, fdb_info, +- sizeof(switchdev_work->fdb_info)); +- switchdev_work->fdb_info.addr = kzalloc(ETH_ALEN, GFP_ATOMIC); +- if (!switchdev_work->fdb_info.addr) +- return -ENOMEM; +- ether_addr_copy((u8 *)switchdev_work->fdb_info.addr, +- fdb_info->addr); +- return 0; ++ if (dsa_is_user_port(ds, dp->index)) ++ dev_put(dp->slave); + } + + /* Called under rcu_read_lock() */ +@@ -2164,7 +2154,9 @@ static int dsa_slave_switchdev_event(str + unsigned long event, void *ptr) + { + struct net_device *dev = switchdev_notifier_info_to_dev(ptr); ++ const struct switchdev_notifier_fdb_info *fdb_info; + struct dsa_switchdev_event_work *switchdev_work; ++ struct dsa_port *dp; + int err; + + if (event == SWITCHDEV_PORT_ATTR_SET) { +@@ -2177,20 +2169,32 @@ static int dsa_slave_switchdev_event(str + if (!dsa_slave_dev_check(dev)) + return NOTIFY_DONE; + ++ dp = dsa_slave_to_port(dev); ++ + switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC); + if (!switchdev_work) + return NOTIFY_BAD; + + INIT_WORK(&switchdev_work->work, + dsa_slave_switchdev_event_work); +- switchdev_work->dev = dev; ++ switchdev_work->ds = dp->ds; ++ switchdev_work->port = dp->index; + switchdev_work->event = event; + + switch (event) { + case SWITCHDEV_FDB_ADD_TO_DEVICE: + case SWITCHDEV_FDB_DEL_TO_DEVICE: +- if (dsa_slave_switchdev_fdb_work_init(switchdev_work, ptr)) +- goto err_fdb_work_init; ++ fdb_info = ptr; ++ ++ if (!fdb_info->added_by_user) { ++ kfree(switchdev_work); ++ return NOTIFY_OK; ++ } ++ ++ ether_addr_copy(switchdev_work->addr, ++ fdb_info->addr); ++ switchdev_work->vid = fdb_info->vid; ++ + dev_hold(dev); + break; + default: +@@ -2200,10 +2204,6 @@ static int dsa_slave_switchdev_event(str + + dsa_schedule_work(&switchdev_work->work); + return NOTIFY_OK; +- +-err_fdb_work_init: +- kfree(switchdev_work); +- return NOTIFY_BAD; + } + + static int dsa_slave_switchdev_blocking_event(struct notifier_block *unused, diff --git a/target/linux/generic/backport-5.15/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch b/target/linux/generic/backport-5.15/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch new file mode 100644 index 0000000000..9131df70d3 --- /dev/null +++ b/target/linux/generic/backport-5.15/723-v5.12-net-dsa-move-switchdev-event-implementation-under-th.patch @@ -0,0 +1,85 @@ +From 447d290a58bd335d68f665713842365d3d6447df Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:33 +0200 +Subject: [PATCH] net: dsa: move switchdev event implementation under the same + switch/case statement + +We'll need to start listening to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE +events even for interfaces where dsa_slave_dev_check returns false, so +we need that check inside the switch-case statement for SWITCHDEV_FDB_*. + +This movement also avoids a useless allocation / free of switchdev_work +on the untreated "default event" case. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + net/dsa/slave.c | 35 ++++++++++++++++------------------- + 1 file changed, 16 insertions(+), 19 deletions(-) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2159,31 +2159,29 @@ static int dsa_slave_switchdev_event(str + struct dsa_port *dp; + int err; + +- if (event == SWITCHDEV_PORT_ATTR_SET) { ++ switch (event) { ++ case SWITCHDEV_PORT_ATTR_SET: + err = switchdev_handle_port_attr_set(dev, ptr, + dsa_slave_dev_check, + dsa_slave_port_attr_set); + return notifier_from_errno(err); +- } +- +- if (!dsa_slave_dev_check(dev)) +- return NOTIFY_DONE; ++ case SWITCHDEV_FDB_ADD_TO_DEVICE: ++ case SWITCHDEV_FDB_DEL_TO_DEVICE: ++ if (!dsa_slave_dev_check(dev)) ++ return NOTIFY_DONE; + +- dp = dsa_slave_to_port(dev); ++ dp = dsa_slave_to_port(dev); + +- switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC); +- if (!switchdev_work) +- return NOTIFY_BAD; +- +- INIT_WORK(&switchdev_work->work, +- dsa_slave_switchdev_event_work); +- switchdev_work->ds = dp->ds; +- switchdev_work->port = dp->index; +- switchdev_work->event = event; ++ switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC); ++ if (!switchdev_work) ++ return NOTIFY_BAD; ++ ++ INIT_WORK(&switchdev_work->work, ++ dsa_slave_switchdev_event_work); ++ switchdev_work->ds = dp->ds; ++ switchdev_work->port = dp->index; ++ switchdev_work->event = event; + +- switch (event) { +- case SWITCHDEV_FDB_ADD_TO_DEVICE: +- case SWITCHDEV_FDB_DEL_TO_DEVICE: + fdb_info = ptr; + + if (!fdb_info->added_by_user) { +@@ -2196,13 +2194,12 @@ static int dsa_slave_switchdev_event(str + switchdev_work->vid = fdb_info->vid; + + dev_hold(dev); ++ dsa_schedule_work(&switchdev_work->work); + break; + default: +- kfree(switchdev_work); + return NOTIFY_DONE; + } + +- dsa_schedule_work(&switchdev_work->work); + return NOTIFY_OK; + } + diff --git a/target/linux/generic/backport-5.15/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch b/target/linux/generic/backport-5.15/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch new file mode 100644 index 0000000000..b7b6ebe461 --- /dev/null +++ b/target/linux/generic/backport-5.15/724-v5.12-net-dsa-exit-early-in-dsa_slave_switchdev_event-if-w.patch @@ -0,0 +1,42 @@ +From 5fb4a451a87d8ed3363d28b63a3295399373d6c4 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:34 +0200 +Subject: [PATCH] net: dsa: exit early in dsa_slave_switchdev_event if we can't + program the FDB + +Right now, the following would happen for a switch driver that does not +implement .port_fdb_add or .port_fdb_del. + +dsa_slave_switchdev_event returns NOTIFY_OK and schedules: +-> dsa_slave_switchdev_event_work + -> dsa_port_fdb_add + -> dsa_port_notify(DSA_NOTIFIER_FDB_ADD) + -> dsa_switch_fdb_add + -> if (!ds->ops->port_fdb_add) return -EOPNOTSUPP; + -> an error is printed with dev_dbg, and + dsa_fdb_offload_notify(switchdev_work) is not called. + +We can avoid scheduling the worker for nothing and say NOTIFY_DONE. +Because we don't call dsa_fdb_offload_notify, the static FDB entry will +remain just in the software bridge. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + net/dsa/slave.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2172,6 +2172,9 @@ static int dsa_slave_switchdev_event(str + + dp = dsa_slave_to_port(dev); + ++ if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del) ++ return NOTIFY_DONE; ++ + switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC); + if (!switchdev_work) + return NOTIFY_BAD; diff --git a/target/linux/generic/backport-5.15/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch b/target/linux/generic/backport-5.15/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch new file mode 100644 index 0000000000..e7b9af1951 --- /dev/null +++ b/target/linux/generic/backport-5.15/725-v5.12-net-dsa-listen-for-SWITCHDEV_-FDB-DEL-_ADD_TO_DEVICE.patch @@ -0,0 +1,264 @@ +From d5f19486cee79d04c054427577ac96ed123706db Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 6 Jan 2021 11:51:35 +0200 +Subject: [PATCH] net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on + foreign bridge neighbors + +Some DSA switches (and not only) cannot learn source MAC addresses from +packets injected from the CPU. They only perform hardware address +learning from inbound traffic. + +This can be problematic when we have a bridge spanning some DSA switch +ports and some non-DSA ports (which we'll call "foreign interfaces" from +DSA's perspective). + +There are 2 classes of problems created by the lack of learning on +CPU-injected traffic: +- excessive flooding, due to the fact that DSA treats those addresses as + unknown +- the risk of stale routes, which can lead to temporary packet loss + +To illustrate the second class, consider the following situation, which +is common in production equipment (wireless access points, where there +is a WLAN interface and an Ethernet switch, and these form a single +bridging domain). + + AP 1: + +------------------------------------------------------------------------+ + | br0 | + +------------------------------------------------------------------------+ + +------------+ +------------+ +------------+ +------------+ +------------+ + | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | + +------------+ +------------+ +------------+ +------------+ +------------+ + | ^ ^ + | | | + | | | + | Client A Client B + | + | + | + +------------+ +------------+ +------------+ +------------+ +------------+ + | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | + +------------+ +------------+ +------------+ +------------+ +------------+ + +------------------------------------------------------------------------+ + | br0 | + +------------------------------------------------------------------------+ + AP 2 + +- br0 of AP 1 will know that Clients A and B are reachable via wlan0 +- the hardware fdb of a DSA switch driver today is not kept in sync with + the software entries on other bridge ports, so it will not know that + clients A and B are reachable via the CPU port UNLESS the hardware + switch itself performs SA learning from traffic injected from the CPU. + Nonetheless, a substantial number of switches don't. +- the hardware fdb of the DSA switch on AP 2 may autonomously learn that + Client A and B are reachable through swp0. Therefore, the software br0 + of AP 2 also may or may not learn this. In the example we're + illustrating, some Ethernet traffic has been going on, and br0 from AP + 2 has indeed learnt that it can reach Client B through swp0. + +One of the wireless clients, say Client B, disconnects from AP 1 and +roams to AP 2. The topology now looks like this: + + AP 1: + +------------------------------------------------------------------------+ + | br0 | + +------------------------------------------------------------------------+ + +------------+ +------------+ +------------+ +------------+ +------------+ + | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | + +------------+ +------------+ +------------+ +------------+ +------------+ + | ^ + | | + | Client A + | + | + | Client B + | | + | v + +------------+ +------------+ +------------+ +------------+ +------------+ + | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | + +------------+ +------------+ +------------+ +------------+ +------------+ + +------------------------------------------------------------------------+ + | br0 | + +------------------------------------------------------------------------+ + AP 2 + +- br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) +- br0 of AP 1 will (possibly) know that Client B has left wlan0. There + are cases where it might never find out though. Either way, DSA today + does not process that notification in any way. +- the hardware FDB of the DSA switch on AP 1 may learn autonomously that + Client B can be reached via swp0, if it receives any packet with + Client 1's source MAC address over Ethernet. +- the hardware FDB of the DSA switch on AP 2 still thinks that Client B + can be reached via swp0. It does not know that it has roamed to wlan0, + because it doesn't perform SA learning from the CPU port. + +Now Client A contacts Client B. +AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet +segment. +AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. +Hairpinning is disabled => drop. + +This problem comes from the fact that these switches have a 'blind spot' +for addresses coming from software bridging. The generic solution is not +to assume that hardware learning can be enabled somehow, but to listen +to more bridge learning events. It turns out that the bridge driver does +learn in software from all inbound frames, in __br_handle_local_finish. +A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the +addresses serviced by the bridge on 'foreign' interfaces. The software +bridge also does the right thing on migration, by notifying that the old +entry is deleted, so that does not need to be special-cased in DSA. When +it is deleted, we just need to delete our static FDB entry towards the +CPU too, and wait. + +The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE +events received on its own interfaces, such as static FDB entries. + +Luckily we can change that, and DSA can listen to all switchdev FDB +add/del events in the system and figure out if those events were emitted +by a bridge that spans at least one of DSA's own ports. In case that is +true, DSA will also offload that address towards its own CPU port, in +the eventuality that there might be bridge clients attached to the DSA +switch who want to talk to the station connected to the foreign +interface. + +In terms of implementation, we need to keep the fdb_info->added_by_user +check for the case where the switchdev event was targeted directly at a +DSA switch port. But we don't need to look at that flag for snooped +events. So the check is currently too late, we need to move it earlier. +This also simplifies the code a bit, since we avoid uselessly allocating +and freeing switchdev_work. + +We could probably do some improvements in the future. For example, +multi-bridge support is rudimentary at the moment. If there are two +bridges spanning a DSA switch's ports, and both of them need to service +the same MAC address, then what will happen is that the migration of one +of those stations will trigger the deletion of the FDB entry from the +CPU port while it is still used by other bridge. That could be improved +with reference counting but is left for another time. + +This behavior needs to be enabled at driver level by setting +ds->assisted_learning_on_cpu_port = true. This is because we don't want +to inflict a potential performance penalty (accesses through +MDIO/I2C/SPI are expensive) to hardware that really doesn't need it +because address learning on the CPU port works there. + +Reported-by: DENG Qingfang +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + include/net/dsa.h | 5 +++++ + net/dsa/slave.c | 66 +++++++++++++++++++++++++++++++++++++++++++++---------- + 2 files changed, 60 insertions(+), 11 deletions(-) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -317,6 +317,11 @@ struct dsa_switch { + */ + bool untag_bridge_pvid; + ++ /* Let DSA manage the FDB entries towards the CPU, based on the ++ * software bridge database. ++ */ ++ bool assisted_learning_on_cpu_port; ++ + /* In case vlan_filtering_is_global is set, the VLAN awareness state + * should be retrieved from here and not from the per-port settings. + */ +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2149,6 +2149,28 @@ static void dsa_slave_switchdev_event_wo + dev_put(dp->slave); + } + ++static int dsa_lower_dev_walk(struct net_device *lower_dev, ++ struct netdev_nested_priv *priv) ++{ ++ if (dsa_slave_dev_check(lower_dev)) { ++ priv->data = (void *)netdev_priv(lower_dev); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++static struct dsa_slave_priv *dsa_slave_dev_lower_find(struct net_device *dev) ++{ ++ struct netdev_nested_priv priv = { ++ .data = NULL, ++ }; ++ ++ netdev_walk_all_lower_dev_rcu(dev, dsa_lower_dev_walk, &priv); ++ ++ return (struct dsa_slave_priv *)priv.data; ++} ++ + /* Called under rcu_read_lock() */ + static int dsa_slave_switchdev_event(struct notifier_block *unused, + unsigned long event, void *ptr) +@@ -2167,10 +2189,37 @@ static int dsa_slave_switchdev_event(str + return notifier_from_errno(err); + case SWITCHDEV_FDB_ADD_TO_DEVICE: + case SWITCHDEV_FDB_DEL_TO_DEVICE: +- if (!dsa_slave_dev_check(dev)) +- return NOTIFY_DONE; ++ fdb_info = ptr; ++ ++ if (dsa_slave_dev_check(dev)) { ++ if (!fdb_info->added_by_user) ++ return NOTIFY_OK; ++ ++ dp = dsa_slave_to_port(dev); ++ } else { ++ /* Snoop addresses learnt on foreign interfaces ++ * bridged with us, for switches that don't ++ * automatically learn SA from CPU-injected traffic ++ */ ++ struct net_device *br_dev; ++ struct dsa_slave_priv *p; ++ ++ br_dev = netdev_master_upper_dev_get_rcu(dev); ++ if (!br_dev) ++ return NOTIFY_DONE; ++ ++ if (!netif_is_bridge_master(br_dev)) ++ return NOTIFY_DONE; ++ ++ p = dsa_slave_dev_lower_find(br_dev); ++ if (!p) ++ return NOTIFY_DONE; + +- dp = dsa_slave_to_port(dev); ++ dp = p->dp->cpu_dp; ++ ++ if (!dp->ds->assisted_learning_on_cpu_port) ++ return NOTIFY_DONE; ++ } + + if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del) + return NOTIFY_DONE; +@@ -2185,18 +2234,13 @@ static int dsa_slave_switchdev_event(str + switchdev_work->port = dp->index; + switchdev_work->event = event; + +- fdb_info = ptr; +- +- if (!fdb_info->added_by_user) { +- kfree(switchdev_work); +- return NOTIFY_OK; +- } +- + ether_addr_copy(switchdev_work->addr, + fdb_info->addr); + switchdev_work->vid = fdb_info->vid; + +- dev_hold(dev); ++ /* Hold a reference on the slave for dsa_fdb_offload_notify */ ++ if (dsa_is_user_port(dp->ds, dp->index)) ++ dev_hold(dev); + dsa_schedule_work(&switchdev_work->work); + break; + default: diff --git a/target/linux/generic/backport-5.15/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.15/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch new file mode 100644 index 0000000000..f3a6f948ad --- /dev/null +++ b/target/linux/generic/backport-5.15/730-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch @@ -0,0 +1,84 @@ +From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Fri, 12 Mar 2021 00:07:03 -0800 +Subject: [PATCH] net: dsa: mt7530: setup core clock even in TRGMII mode + +A recent change to MIPS ralink reset logic made it so mt7530 actually +resets the switch on platforms such as mt7621 (where bit 2 is the reset +line for the switch). That exposed an issue where the switch would not +function properly in TRGMII mode after a reset. + +Reconfigure core clock in TRGMII mode to fix the issue. + +Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled. + +Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines") +Signed-off-by: Ilya Lipnitskiy +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++--------------------- + 1 file changed, 25 insertions(+), 27 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -436,34 +436,32 @@ mt7530_pad_clk_setup(struct dsa_switch * + TD_DM_DRVP(8) | TD_DM_DRVN(8)); + + /* Setup core clock for MT7530 */ +- if (!trgint) { +- /* Disable MT7530 core clock */ +- core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- +- /* Disable PLL, since phy_device has not yet been created +- * provided for phy_[read,write]_mmd_indirect is called, we +- * provide our own core_write_mmd_indirect to complete this +- * function. +- */ +- core_write_mmd_indirect(priv, +- CORE_GSWPLL_GRP1, +- MDIO_MMD_VEND2, +- 0); +- +- /* Set core clock into 500Mhz */ +- core_write(priv, CORE_GSWPLL_GRP2, +- RG_GSWPLL_POSDIV_500M(1) | +- RG_GSWPLL_FBKDIV_500M(25)); +- +- /* Enable PLL */ +- core_write(priv, CORE_GSWPLL_GRP1, +- RG_GSWPLL_EN_PRE | +- RG_GSWPLL_POSDIV_200M(2) | +- RG_GSWPLL_FBKDIV_200M(32)); +- +- /* Enable MT7530 core clock */ +- core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); +- } ++ /* Disable MT7530 core clock */ ++ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); ++ ++ /* Disable PLL, since phy_device has not yet been created ++ * provided for phy_[read,write]_mmd_indirect is called, we ++ * provide our own core_write_mmd_indirect to complete this ++ * function. ++ */ ++ core_write_mmd_indirect(priv, ++ CORE_GSWPLL_GRP1, ++ MDIO_MMD_VEND2, ++ 0); ++ ++ /* Set core clock into 500Mhz */ ++ core_write(priv, CORE_GSWPLL_GRP2, ++ RG_GSWPLL_POSDIV_500M(1) | ++ RG_GSWPLL_FBKDIV_500M(25)); ++ ++ /* Enable PLL */ ++ core_write(priv, CORE_GSWPLL_GRP1, ++ RG_GSWPLL_EN_PRE | ++ RG_GSWPLL_POSDIV_200M(2) | ++ RG_GSWPLL_FBKDIV_200M(32)); ++ ++ /* Enable MT7530 core clock */ ++ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); + + /* Setup the MT7530 TRGMII Tx Clock */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); diff --git a/target/linux/generic/backport-5.15/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch b/target/linux/generic/backport-5.15/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch new file mode 100644 index 0000000000..9e5047a16b --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v5.12-net-dsa-mt7530-MT7530-optional-GPIO-support.patch @@ -0,0 +1,181 @@ +From 429a0edeefd88cbfca5c417dfb8561047bb50769 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Mon, 25 Jan 2021 12:43:22 +0800 +Subject: [PATCH] net: dsa: mt7530: MT7530 optional GPIO support + +MT7530's LED controller can drive up to 15 LED/GPIOs. + +Add support for GPIO control and allow users to use its GPIOs by +setting gpio-controller property in device tree. + +Signed-off-by: DENG Qingfang +Reviewed-by: Linus Walleij +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 110 +++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.h | 20 +++++++ + 2 files changed, 130 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + #include + + #include "mt7530.h" +@@ -1534,6 +1535,109 @@ mtk_get_tag_protocol(struct dsa_switch * + } + } + ++static inline u32 ++mt7530_gpio_to_bit(unsigned int offset) ++{ ++ /* Map GPIO offset to register bit ++ * [ 2: 0] port 0 LED 0..2 as GPIO 0..2 ++ * [ 6: 4] port 1 LED 0..2 as GPIO 3..5 ++ * [10: 8] port 2 LED 0..2 as GPIO 6..8 ++ * [14:12] port 3 LED 0..2 as GPIO 9..11 ++ * [18:16] port 4 LED 0..2 as GPIO 12..14 ++ */ ++ return BIT(offset + offset / 3); ++} ++ ++static int ++mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct mt7530_priv *priv = gpiochip_get_data(gc); ++ u32 bit = mt7530_gpio_to_bit(offset); ++ ++ return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); ++} ++ ++static void ++mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) ++{ ++ struct mt7530_priv *priv = gpiochip_get_data(gc); ++ u32 bit = mt7530_gpio_to_bit(offset); ++ ++ if (value) ++ mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); ++ else ++ mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); ++} ++ ++static int ++mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct mt7530_priv *priv = gpiochip_get_data(gc); ++ u32 bit = mt7530_gpio_to_bit(offset); ++ ++ return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ? ++ GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; ++} ++ ++static int ++mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct mt7530_priv *priv = gpiochip_get_data(gc); ++ u32 bit = mt7530_gpio_to_bit(offset); ++ ++ mt7530_clear(priv, MT7530_LED_GPIO_OE, bit); ++ mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit); ++ ++ return 0; ++} ++ ++static int ++mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value) ++{ ++ struct mt7530_priv *priv = gpiochip_get_data(gc); ++ u32 bit = mt7530_gpio_to_bit(offset); ++ ++ mt7530_set(priv, MT7530_LED_GPIO_DIR, bit); ++ ++ if (value) ++ mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); ++ else ++ mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); ++ ++ mt7530_set(priv, MT7530_LED_GPIO_OE, bit); ++ ++ return 0; ++} ++ ++static int ++mt7530_setup_gpio(struct mt7530_priv *priv) ++{ ++ struct device *dev = priv->dev; ++ struct gpio_chip *gc; ++ ++ gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); ++ if (!gc) ++ return -ENOMEM; ++ ++ mt7530_write(priv, MT7530_LED_GPIO_OE, 0); ++ mt7530_write(priv, MT7530_LED_GPIO_DIR, 0); ++ mt7530_write(priv, MT7530_LED_IO_MODE, 0); ++ ++ gc->label = "mt7530"; ++ gc->parent = dev; ++ gc->owner = THIS_MODULE; ++ gc->get_direction = mt7530_gpio_get_direction; ++ gc->direction_input = mt7530_gpio_direction_input; ++ gc->direction_output = mt7530_gpio_direction_output; ++ gc->get = mt7530_gpio_get; ++ gc->set = mt7530_gpio_set; ++ gc->base = -1; ++ gc->ngpio = 15; ++ gc->can_sleep = true; ++ ++ return devm_gpiochip_add_data(dev, gc, priv); ++} ++ + static int + mt7530_setup(struct dsa_switch *ds) + { +@@ -1675,6 +1779,12 @@ mt7530_setup(struct dsa_switch *ds) + } + } + ++ if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) { ++ ret = mt7530_setup_gpio(priv); ++ if (ret) ++ return ret; ++ } ++ + mt7530_setup_port5(ds, interface); + + /* Flush the FDB table */ +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -529,6 +529,26 @@ enum mt7531_clk_skew { + #define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) + #define MT7531_EXT_P_MDIO_12 (2 << 16) + ++/* Registers for LED GPIO control (MT7530 only) ++ * All registers follow this pattern: ++ * [ 2: 0] port 0 ++ * [ 6: 4] port 1 ++ * [10: 8] port 2 ++ * [14:12] port 3 ++ * [18:16] port 4 ++ */ ++ ++/* LED enable, 0: Disable, 1: Enable (Default) */ ++#define MT7530_LED_EN 0x7d00 ++/* LED mode, 0: GPIO mode, 1: PHY mode (Default) */ ++#define MT7530_LED_IO_MODE 0x7d04 ++/* GPIO direction, 0: Input, 1: Output */ ++#define MT7530_LED_GPIO_DIR 0x7d10 ++/* GPIO output enable, 0: Disable, 1: Enable */ ++#define MT7530_LED_GPIO_OE 0x7d14 ++/* GPIO value, 0: Low, 1: High */ ++#define MT7530_LED_GPIO_DATA 0x7d18 ++ + #define MT7530_CREV 0x7ffc + #define CHIP_NAME_SHIFT 16 + #define MT7530_ID 0x7530 diff --git a/target/linux/generic/backport-5.15/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch b/target/linux/generic/backport-5.15/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch new file mode 100644 index 0000000000..38dd8a7296 --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch @@ -0,0 +1,120 @@ +From 40b5d2f15c091fa9c854acde91ad2acb504027d7 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= +Date: Mon, 12 Apr 2021 08:50:31 +0200 +Subject: [PATCH] net: dsa: mt7530: Add support for EEE features +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds EEE support. + +Signed-off-by: René van Dorst +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 43 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.h | 14 ++++++++++++- + 2 files changed, 56 insertions(+), 1 deletion(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2371,6 +2371,17 @@ static void mt753x_phylink_mac_link_up(s + mcr |= PMCR_RX_FC_EN; + } + ++ if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) { ++ switch (speed) { ++ case SPEED_1000: ++ mcr |= PMCR_FORCE_EEE1G; ++ break; ++ case SPEED_100: ++ mcr |= PMCR_FORCE_EEE100; ++ break; ++ } ++ } ++ + mt7530_set(priv, MT7530_PMCR_P(port), mcr); + } + +@@ -2601,6 +2612,36 @@ mt753x_phy_write(struct dsa_switch *ds, + return priv->info->phy_write(ds, port, regnum, val); + } + ++static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, ++ struct ethtool_eee *e) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); ++ ++ e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); ++ e->tx_lpi_timer = GET_LPI_THRESH(eeecr); ++ ++ return 0; ++} ++ ++static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, ++ struct ethtool_eee *e) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; ++ ++ if (e->tx_lpi_timer > 0xFFF) ++ return -EINVAL; ++ ++ set = SET_LPI_THRESH(e->tx_lpi_timer); ++ if (!e->tx_lpi_enabled) ++ /* Force LPI Mode without a delay */ ++ set |= LPI_MODE_EN; ++ mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set); ++ ++ return 0; ++} ++ + static const struct dsa_switch_ops mt7530_switch_ops = { + .get_tag_protocol = mtk_get_tag_protocol, + .setup = mt753x_setup, +@@ -2629,6 +2670,8 @@ static const struct dsa_switch_ops mt753 + .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, + .phylink_mac_link_down = mt753x_phylink_mac_link_down, + .phylink_mac_link_up = mt753x_phylink_mac_link_up, ++ .get_mac_eee = mt753x_get_mac_eee, ++ .set_mac_eee = mt753x_set_mac_eee, + }; + + static const struct mt753x_info mt753x_table[] = { +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -240,6 +240,8 @@ enum mt7530_vlan_port_attr { + #define PMCR_RX_EN BIT(13) + #define PMCR_BACKOFF_EN BIT(9) + #define PMCR_BACKPR_EN BIT(8) ++#define PMCR_FORCE_EEE1G BIT(7) ++#define PMCR_FORCE_EEE100 BIT(6) + #define PMCR_TX_FC_EN BIT(5) + #define PMCR_RX_FC_EN BIT(4) + #define PMCR_FORCE_SPEED_1000 BIT(3) +@@ -264,7 +266,8 @@ enum mt7530_vlan_port_attr { + #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ + PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ + PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ +- PMCR_FORCE_FDX | PMCR_FORCE_LNK) ++ PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ ++ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) + #define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ + PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ + PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ +@@ -273,6 +276,15 @@ enum mt7530_vlan_port_attr { + PMCR_FORCE_SPEED_1000 | \ + PMCR_FORCE_FDX | PMCR_FORCE_LNK) + ++#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) ++#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) ++#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16) ++#define LPI_THRESH_MASK GENMASK(15, 4) ++#define LPI_THRESH_SHT 4 ++#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK) ++#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT) ++#define LPI_MODE_EN BIT(0) ++ + #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) + #define PMSR_EEE1G BIT(7) + #define PMSR_EEE100M BIT(6) diff --git a/target/linux/generic/backport-5.15/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch b/target/linux/generic/backport-5.15/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch new file mode 100644 index 0000000000..60b07e5a3e --- /dev/null +++ b/target/linux/generic/backport-5.15/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch @@ -0,0 +1,1935 @@ +From 83216e3988cd196183542937c9bd58b279f946af Mon Sep 17 00:00:00 2001 +From: Michael Walle +Date: Mon, 12 Apr 2021 19:47:17 +0200 +Subject: of: net: pass the dst buffer to of_get_mac_address() + +of_get_mac_address() returns a "const void*" pointer to a MAC address. +Lately, support to fetch the MAC address by an NVMEM provider was added. +But this will only work with platform devices. It will not work with +PCI devices (e.g. of an integrated root complex) and esp. not with DSA +ports. + +There is an of_* variant of the nvmem binding which works without +devices. The returned data of a nvmem_cell_read() has to be freed after +use. On the other hand the return of_get_mac_address() points to some +static data without a lifetime. The trick for now, was to allocate a +device resource managed buffer which is then returned. This will only +work if we have an actual device. + +Change it, so that the caller of of_get_mac_address() has to supply a +buffer where the MAC address is written to. Unfortunately, this will +touch all drivers which use the of_get_mac_address(). + +Usually the code looks like: + + const char *addr; + addr = of_get_mac_address(np); + if (!IS_ERR(addr)) + ether_addr_copy(ndev->dev_addr, addr); + +This can then be simply rewritten as: + + of_get_mac_address(np, ndev->dev_addr); + +Sometimes is_valid_ether_addr() is used to test the MAC address. +of_get_mac_address() already makes sure, it just returns a valid MAC +address. Thus we can just test its return code. But we have to be +careful if there are still other sources for the MAC address before the +of_get_mac_address(). In this case we have to keep the +is_valid_ether_addr() call. + +The following coccinelle patch was used to convert common cases to the +new style. Afterwards, I've manually gone over the drivers and fixed the +return code variable: either used a new one or if one was already +available use that. Mansour Moufid, thanks for that coccinelle patch! + + +@a@ +identifier x; +expression y, z; +@@ +- x = of_get_mac_address(y); ++ x = of_get_mac_address(y, z); + <... +- ether_addr_copy(z, x); + ...> + +@@ +identifier a.x; +@@ +- if (<+... x ...+>) {} + +@@ +identifier a.x; +@@ + if (<+... x ...+>) { + ... + } +- else {} + +@@ +identifier a.x; +expression e; +@@ +- if (<+... x ...+>@e) +- {} +- else ++ if (!(e)) + {...} + +@@ +expression x, y, z; +@@ +- x = of_get_mac_address(y, z); ++ of_get_mac_address(y, z); + ... when != x + + +All drivers, except drivers/net/ethernet/aeroflex/greth.c, were +compile-time tested. + +Suggested-by: Andrew Lunn +Signed-off-by: Michael Walle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + arch/arm/mach-mvebu/kirkwood.c | 3 +- + arch/powerpc/sysdev/tsi108_dev.c | 5 +- + drivers/net/ethernet/aeroflex/greth.c | 6 +-- + drivers/net/ethernet/allwinner/sun4i-emac.c | 10 ++-- + drivers/net/ethernet/altera/altera_tse_main.c | 7 +-- + drivers/net/ethernet/arc/emac_main.c | 8 +-- + drivers/net/ethernet/atheros/ag71xx.c | 7 +-- + drivers/net/ethernet/broadcom/bcm4908_enet.c | 7 +-- + drivers/net/ethernet/broadcom/bcmsysport.c | 7 +-- + drivers/net/ethernet/broadcom/bgmac-bcma.c | 10 ++-- + drivers/net/ethernet/broadcom/bgmac-platform.c | 11 ++-- + drivers/net/ethernet/cadence/macb_main.c | 11 ++-- + drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 8 +-- + drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 5 +- + drivers/net/ethernet/davicom/dm9000.c | 10 ++-- + drivers/net/ethernet/ethoc.c | 6 +-- + drivers/net/ethernet/ezchip/nps_enet.c | 7 +-- + drivers/net/ethernet/freescale/fec_main.c | 7 +-- + drivers/net/ethernet/freescale/fec_mpc52xx.c | 7 +-- + drivers/net/ethernet/freescale/fman/mac.c | 9 ++-- + .../net/ethernet/freescale/fs_enet/fs_enet-main.c | 5 +- + drivers/net/ethernet/freescale/gianfar.c | 8 +-- + drivers/net/ethernet/freescale/ucc_geth.c | 5 +- + drivers/net/ethernet/hisilicon/hisi_femac.c | 7 +-- + drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 7 +-- + drivers/net/ethernet/lantiq_xrx200.c | 7 +-- + drivers/net/ethernet/marvell/mv643xx_eth.c | 5 +- + drivers/net/ethernet/marvell/mvneta.c | 6 +-- + .../net/ethernet/marvell/prestera/prestera_main.c | 11 ++-- + drivers/net/ethernet/marvell/pxa168_eth.c | 9 +--- + drivers/net/ethernet/marvell/sky2.c | 8 ++- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++-- + drivers/net/ethernet/micrel/ks8851_common.c | 7 ++- + drivers/net/ethernet/microchip/lan743x_main.c | 5 +- + drivers/net/ethernet/nxp/lpc_eth.c | 4 +- + drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++-- + drivers/net/ethernet/qualcomm/qca_uart.c | 9 +--- + drivers/net/ethernet/renesas/ravb_main.c | 12 +++-- + drivers/net/ethernet/renesas/sh_eth.c | 5 +- + .../net/ethernet/samsung/sxgbe/sxgbe_platform.c | 13 ++--- + drivers/net/ethernet/socionext/sni_ave.c | 10 ++-- + .../net/ethernet/stmicro/stmmac/dwmac-anarion.c | 2 +- + .../ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-generic.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c | 2 +- + .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 +- + .../net/ethernet/stmicro/stmmac/dwmac-visconti.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +- + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 14 ++--- + .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 2 +- + drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 ++++--- + drivers/net/ethernet/ti/cpsw.c | 7 +-- + drivers/net/ethernet/ti/cpsw_new.c | 7 +-- + drivers/net/ethernet/ti/davinci_emac.c | 8 +-- + drivers/net/ethernet/ti/netcp_core.c | 7 +-- + drivers/net/ethernet/wiznet/w5100-spi.c | 8 ++- + drivers/net/ethernet/wiznet/w5100.c | 2 +- + drivers/net/ethernet/xilinx/ll_temac_main.c | 8 +-- + drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 15 +++--- + drivers/net/ethernet/xilinx/xilinx_emaclite.c | 8 +-- + drivers/net/wireless/ath/ath9k/init.c | 5 +- + drivers/net/wireless/mediatek/mt76/eeprom.c | 9 +--- + drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 6 +-- + drivers/of/of_net.c | 60 ++++++++++------------ + drivers/staging/octeon/ethernet.c | 10 ++-- + drivers/staging/wfx/main.c | 7 ++- + include/linux/of_net.h | 6 +-- + include/net/dsa.h | 2 +- + net/dsa/dsa2.c | 2 +- + net/dsa/slave.c | 2 +- + net/ethernet/eth.c | 11 ++-- + 85 files changed, 218 insertions(+), 364 deletions(-) + +--- a/arch/arm/mach-mvebu/kirkwood.c ++++ b/arch/arm/mach-mvebu/kirkwood.c +@@ -84,6 +84,7 @@ static void __init kirkwood_dt_eth_fixup + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; ++ u8 tmpmac[ETH_ALEN]; + void __iomem *io; + u8 *macaddr; + u32 reg; +@@ -93,7 +94,7 @@ static void __init kirkwood_dt_eth_fixup + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || +- !IS_ERR(of_get_mac_address(np))) ++ !of_get_mac_address(np, tmpmac)) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); +--- a/arch/powerpc/sysdev/tsi108_dev.c ++++ b/arch/powerpc/sysdev/tsi108_dev.c +@@ -73,7 +73,6 @@ static int __init tsi108_eth_of_init(voi + struct device_node *phy, *mdio; + hw_info tsi_eth_data; + const unsigned int *phy_id; +- const void *mac_addr; + const phandle *ph; + + memset(r, 0, sizeof(r)); +@@ -101,9 +100,7 @@ static int __init tsi108_eth_of_init(voi + goto err; + } + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(tsi_eth_data.mac_addr, mac_addr); ++ of_get_mac_address(np, tsi_eth_data.mac_addr); + + ph = of_get_property(np, "mdio-handle", NULL); + mdio = of_find_node_by_phandle(*ph); +--- a/drivers/net/ethernet/aeroflex/greth.c ++++ b/drivers/net/ethernet/aeroflex/greth.c +@@ -1449,10 +1449,10 @@ static int greth_of_probe(struct platfor + break; + } + if (i == 6) { +- const u8 *addr; ++ u8 addr[ETH_ALEN]; + +- addr = of_get_mac_address(ofdev->dev.of_node); +- if (!IS_ERR(addr)) { ++ err = of_get_mac_address(ofdev->dev.of_node, addr); ++ if (!err) { + for (i = 0; i < 6; i++) + macaddr[i] = (unsigned int) addr[i]; + } else { +--- a/drivers/net/ethernet/allwinner/sun4i-emac.c ++++ b/drivers/net/ethernet/allwinner/sun4i-emac.c +@@ -790,7 +790,6 @@ static int emac_probe(struct platform_de + struct emac_board_info *db; + struct net_device *ndev; + int ret = 0; +- const char *mac_addr; + + ndev = alloc_etherdev(sizeof(struct emac_board_info)); + if (!ndev) { +@@ -853,12 +852,9 @@ static int emac_probe(struct platform_de + } + + /* Read MAC-address from DT */ +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- +- /* Check if the MAC address is valid, if not get a random one */ +- if (!is_valid_ether_addr(ndev->dev_addr)) { ++ ret = of_get_mac_address(np, ndev->dev_addr); ++ if (ret) { ++ /* if the MAC address is invalid get a random one */ + eth_hw_addr_random(ndev); + dev_warn(&pdev->dev, "using random MAC address %pM\n", + ndev->dev_addr); +--- a/drivers/net/ethernet/altera/altera_tse_main.c ++++ b/drivers/net/ethernet/altera/altera_tse_main.c +@@ -1351,7 +1351,6 @@ static int altera_tse_probe(struct platf + struct resource *control_port; + struct resource *dma_res; + struct altera_tse_private *priv; +- const unsigned char *macaddr; + void __iomem *descmap; + const struct of_device_id *of_id = NULL; + +@@ -1528,10 +1527,8 @@ static int altera_tse_probe(struct platf + priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE; + + /* get default MAC address from device tree */ +- macaddr = of_get_mac_address(pdev->dev.of_node); +- if (!IS_ERR(macaddr)) +- ether_addr_copy(ndev->dev_addr, macaddr); +- else ++ ret = of_get_mac_address(pdev->dev.of_node, ndev->dev_addr); ++ if (ret) + eth_hw_addr_random(ndev); + + /* get phy addr and create mdio */ +--- a/drivers/net/ethernet/arc/emac_main.c ++++ b/drivers/net/ethernet/arc/emac_main.c +@@ -857,7 +857,6 @@ int arc_emac_probe(struct net_device *nd + struct device_node *phy_node; + struct phy_device *phydev = NULL; + struct arc_emac_priv *priv; +- const char *mac_addr; + unsigned int id, clock_frequency, irq; + int err; + +@@ -942,11 +941,8 @@ int arc_emac_probe(struct net_device *nd + } + + /* Get MAC address from device tree */ +- mac_addr = of_get_mac_address(dev->of_node); +- +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- else ++ err = of_get_mac_address(dev->of_node, ndev->dev_addr); ++ if (err) + eth_hw_addr_random(ndev); + + arc_emac_set_address_internal(ndev); +--- a/drivers/net/ethernet/atheros/ag71xx.c ++++ b/drivers/net/ethernet/atheros/ag71xx.c +@@ -1856,7 +1856,6 @@ static int ag71xx_probe(struct platform_ + const struct ag71xx_dcfg *dcfg; + struct net_device *ndev; + struct resource *res; +- const void *mac_addr; + int tx_size, err, i; + struct ag71xx *ag; + +@@ -1952,10 +1951,8 @@ static int ag71xx_probe(struct platform_ + ag->stop_desc->ctrl = 0; + ag->stop_desc->next = (u32)ag->stop_desc_dma; + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- memcpy(ndev->dev_addr, mac_addr, ETH_ALEN); +- if (IS_ERR(mac_addr) || !is_valid_ether_addr(ndev->dev_addr)) { ++ err = of_get_mac_address(np, ndev->dev_addr); ++ if (err) { + netif_err(ag, probe, ndev, "invalid MAC address, using random address\n"); + eth_random_addr(ndev->dev_addr); + } +--- a/drivers/net/ethernet/broadcom/bcmsysport.c ++++ b/drivers/net/ethernet/broadcom/bcmsysport.c +@@ -2468,7 +2468,6 @@ static int bcm_sysport_probe(struct plat + struct bcm_sysport_priv *priv; + struct device_node *dn; + struct net_device *dev; +- const void *macaddr; + u32 txq, rxq; + int ret; + +@@ -2563,12 +2562,10 @@ static int bcm_sysport_probe(struct plat + } + + /* Initialize netdevice members */ +- macaddr = of_get_mac_address(dn); +- if (IS_ERR(macaddr)) { ++ ret = of_get_mac_address(dn, dev->dev_addr); ++ if (ret) { + dev_warn(&pdev->dev, "using random Ethernet MAC\n"); + eth_hw_addr_random(dev); +- } else { +- ether_addr_copy(dev->dev_addr, macaddr); + } + + SET_NETDEV_DEV(dev, &pdev->dev); +--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c ++++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c +@@ -115,7 +115,7 @@ static int bgmac_probe(struct bcma_devic + struct ssb_sprom *sprom = &core->bus->sprom; + struct mii_bus *mii_bus; + struct bgmac *bgmac; +- const u8 *mac = NULL; ++ const u8 *mac; + int err; + + bgmac = bgmac_alloc(&core->dev); +@@ -128,11 +128,10 @@ static int bgmac_probe(struct bcma_devic + + bcma_set_drvdata(core, bgmac); + +- if (bgmac->dev->of_node) +- mac = of_get_mac_address(bgmac->dev->of_node); ++ err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr); + + /* If no MAC address assigned via device tree, check SPROM */ +- if (IS_ERR_OR_NULL(mac)) { ++ if (err) { + switch (core->core_unit) { + case 0: + mac = sprom->et0mac; +@@ -149,10 +148,9 @@ static int bgmac_probe(struct bcma_devic + err = -ENOTSUPP; + goto err; + } ++ ether_addr_copy(bgmac->net_dev->dev_addr, mac); + } + +- ether_addr_copy(bgmac->net_dev->dev_addr, mac); +- + /* On BCM4706 we need common core to access PHY */ + if (core->id.id == BCMA_CORE_4706_MAC_GBIT && + !core->bus->drv_gmac_cmn.core) { +--- a/drivers/net/ethernet/broadcom/bgmac-platform.c ++++ b/drivers/net/ethernet/broadcom/bgmac-platform.c +@@ -173,7 +173,7 @@ static int bgmac_probe(struct platform_d + struct device_node *np = pdev->dev.of_node; + struct bgmac *bgmac; + struct resource *regs; +- const u8 *mac_addr; ++ int ret; + + bgmac = bgmac_alloc(&pdev->dev); + if (!bgmac) +@@ -192,11 +192,10 @@ static int bgmac_probe(struct platform_d + bgmac->dev = &pdev->dev; + bgmac->dma_dev = &pdev->dev; + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(bgmac->net_dev->dev_addr, mac_addr); +- else +- dev_warn(&pdev->dev, "MAC address not present in device tree\n"); ++ ret = of_get_mac_address(np, bgmac->net_dev->dev_addr); ++ if (ret) ++ dev_warn(&pdev->dev, ++ "MAC address not present in device tree\n"); + + bgmac->irq = platform_get_irq(pdev, 0); + if (bgmac->irq < 0) +--- a/drivers/net/ethernet/cadence/macb_main.c ++++ b/drivers/net/ethernet/cadence/macb_main.c +@@ -4479,7 +4479,6 @@ static int macb_probe(struct platform_de + struct net_device *dev; + struct resource *regs; + void __iomem *mem; +- const char *mac; + struct macb *bp; + int err, val; + +@@ -4592,15 +4591,11 @@ static int macb_probe(struct platform_de + if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR) + bp->rx_intr_mask |= MACB_BIT(RXUBR); + +- mac = of_get_mac_address(np); +- if (PTR_ERR(mac) == -EPROBE_DEFER) { +- err = -EPROBE_DEFER; ++ err = of_get_mac_address(np, bp->dev->dev_addr); ++ if (err == -EPROBE_DEFER) + goto err_out_free_netdev; +- } else if (!IS_ERR_OR_NULL(mac)) { +- ether_addr_copy(bp->dev->dev_addr, mac); +- } else { ++ else if (err) + macb_get_hwaddr(bp); +- } + + err = of_get_phy_mode(np, &interface); + if (err) +--- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c ++++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +@@ -1385,7 +1385,6 @@ static int octeon_mgmt_probe(struct plat + struct net_device *netdev; + struct octeon_mgmt *p; + const __be32 *data; +- const u8 *mac; + struct resource *res_mix; + struct resource *res_agl; + struct resource *res_agl_prt_ctl; +@@ -1502,11 +1501,8 @@ static int octeon_mgmt_probe(struct plat + netdev->min_mtu = 64 - OCTEON_MGMT_RX_HEADROOM; + netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM - VLAN_HLEN; + +- mac = of_get_mac_address(pdev->dev.of_node); +- +- if (!IS_ERR(mac)) +- ether_addr_copy(netdev->dev_addr, mac); +- else ++ result = of_get_mac_address(pdev->dev.of_node, netdev->dev_addr); ++ if (result) + eth_hw_addr_random(netdev); + + p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); +--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c ++++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +@@ -1474,7 +1474,6 @@ static int bgx_init_of_phy(struct bgx *b + device_for_each_child_node(&bgx->pdev->dev, fwn) { + struct phy_device *pd; + struct device_node *phy_np; +- const char *mac; + + /* Should always be an OF node. But if it is not, we + * cannot handle it, so exit the loop. +@@ -1483,9 +1482,7 @@ static int bgx_init_of_phy(struct bgx *b + if (!node) + break; + +- mac = of_get_mac_address(node); +- if (!IS_ERR(mac)) +- ether_addr_copy(bgx->lmac[lmac].mac, mac); ++ of_get_mac_address(node, bgx->lmac[lmac].mac); + + SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev); + bgx->lmac[lmac].lmacid = lmac; +--- a/drivers/net/ethernet/davicom/dm9000.c ++++ b/drivers/net/ethernet/davicom/dm9000.c +@@ -1388,7 +1388,7 @@ static struct dm9000_plat_data *dm9000_p + { + struct dm9000_plat_data *pdata; + struct device_node *np = dev->of_node; +- const void *mac_addr; ++ int ret; + + if (!IS_ENABLED(CONFIG_OF) || !np) + return ERR_PTR(-ENXIO); +@@ -1402,11 +1402,9 @@ static struct dm9000_plat_data *dm9000_p + if (of_find_property(np, "davicom,no-eeprom", NULL)) + pdata->flags |= DM9000_PLATF_NO_EEPROM; + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(pdata->dev_addr, mac_addr); +- else if (PTR_ERR(mac_addr) == -EPROBE_DEFER) +- return ERR_CAST(mac_addr); ++ ret = of_get_mac_address(np, pdata->dev_addr); ++ if (ret == -EPROBE_DEFER) ++ return ERR_PTR(ret); + + return pdata; + } +--- a/drivers/net/ethernet/ethoc.c ++++ b/drivers/net/ethernet/ethoc.c +@@ -1151,11 +1151,7 @@ static int ethoc_probe(struct platform_d + ether_addr_copy(netdev->dev_addr, pdata->hwaddr); + priv->phy_id = pdata->phy_id; + } else { +- const void *mac; +- +- mac = of_get_mac_address(pdev->dev.of_node); +- if (!IS_ERR(mac)) +- ether_addr_copy(netdev->dev_addr, mac); ++ of_get_mac_address(pdev->dev.of_node, netdev->dev_addr); + priv->phy_id = -1; + } + +--- a/drivers/net/ethernet/ezchip/nps_enet.c ++++ b/drivers/net/ethernet/ezchip/nps_enet.c +@@ -575,7 +575,6 @@ static s32 nps_enet_probe(struct platfor + struct net_device *ndev; + struct nps_enet_priv *priv; + s32 err = 0; +- const char *mac_addr; + + if (!dev->of_node) + return -ENODEV; +@@ -602,10 +601,8 @@ static s32 nps_enet_probe(struct platfor + dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base); + + /* set kernel MAC address to dev */ +- mac_addr = of_get_mac_address(dev->of_node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- else ++ err = of_get_mac_address(dev->of_node, ndev->dev_addr); ++ if (err) + eth_hw_addr_random(ndev); + + /* Get IRQ number */ +--- a/drivers/net/ethernet/freescale/fec_main.c ++++ b/drivers/net/ethernet/freescale/fec_main.c +@@ -1666,6 +1666,7 @@ static void fec_get_mac(struct net_devic + struct fec_enet_private *fep = netdev_priv(ndev); + struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev); + unsigned char *iap, tmpaddr[ETH_ALEN]; ++ int ret; + + /* + * try to get mac address in following order: +@@ -1681,9 +1682,9 @@ static void fec_get_mac(struct net_devic + if (!is_valid_ether_addr(iap)) { + struct device_node *np = fep->pdev->dev.of_node; + if (np) { +- const char *mac = of_get_mac_address(np); +- if (!IS_ERR(mac)) +- iap = (unsigned char *) mac; ++ ret = of_get_mac_address(np, tmpaddr); ++ if (!ret) ++ iap = tmpaddr; + } + } + +--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c ++++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c +@@ -813,7 +813,6 @@ static int mpc52xx_fec_probe(struct plat + const u32 *prop; + int prop_size; + struct device_node *np = op->dev.of_node; +- const char *mac_addr; + + phys_addr_t rx_fifo; + phys_addr_t tx_fifo; +@@ -891,10 +890,8 @@ static int mpc52xx_fec_probe(struct plat + * + * First try to read MAC address from DT + */ +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(ndev->dev_addr, mac_addr); +- } else { ++ rv = of_get_mac_address(np, ndev->dev_addr); ++ if (rv) { + struct mpc52xx_fec __iomem *fec = priv->fec; + + /* +--- a/drivers/net/ethernet/freescale/fman/mac.c ++++ b/drivers/net/ethernet/freescale/fman/mac.c +@@ -616,7 +616,6 @@ static int mac_probe(struct platform_dev + struct platform_device *of_dev; + struct resource res; + struct mac_priv_s *priv; +- const u8 *mac_addr; + u32 val; + u8 fman_id; + phy_interface_t phy_if; +@@ -734,11 +733,9 @@ static int mac_probe(struct platform_dev + priv->cell_index = (u8)val; + + /* Get the MAC address */ +- mac_addr = of_get_mac_address(mac_node); +- if (IS_ERR(mac_addr)) ++ err = of_get_mac_address(mac_node, mac_dev->addr); ++ if (err) + dev_warn(dev, "of_get_mac_address(%pOF) failed\n", mac_node); +- else +- ether_addr_copy(mac_dev->addr, mac_addr); + + /* Get the port handles */ + nph = of_count_phandle_with_args(mac_node, "fsl,fman-ports", NULL); +@@ -864,7 +861,7 @@ static int mac_probe(struct platform_dev + if (err < 0) + dev_err(dev, "fman_set_mac_active_pause() = %d\n", err); + +- if (!IS_ERR(mac_addr)) ++ if (!is_zero_ether_addr(mac_dev->addr)) + dev_info(dev, "FMan MAC address: %pM\n", mac_dev->addr); + + priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev); +--- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c ++++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c +@@ -918,7 +918,6 @@ static int fs_enet_probe(struct platform + const u32 *data; + struct clk *clk; + int err; +- const u8 *mac_addr; + const char *phy_connection_type; + int privsize, len, ret = -ENODEV; + +@@ -1006,9 +1005,7 @@ static int fs_enet_probe(struct platform + spin_lock_init(&fep->lock); + spin_lock_init(&fep->tx_lock); + +- mac_addr = of_get_mac_address(ofdev->dev.of_node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); ++ of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr); + + ret = fep->ops->allocate_bd(ndev); + if (ret) +--- a/drivers/net/ethernet/freescale/gianfar.c ++++ b/drivers/net/ethernet/freescale/gianfar.c +@@ -641,7 +641,6 @@ static phy_interface_t gfar_get_interfac + static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) + { + const char *model; +- const void *mac_addr; + int err = 0, i; + phy_interface_t interface; + struct net_device *dev = NULL; +@@ -783,11 +782,8 @@ static int gfar_of_init(struct platform_ + if (stash_len || stash_idx) + priv->device_flags |= FSL_GIANFAR_DEV_HAS_BUF_STASHING; + +- mac_addr = of_get_mac_address(np); +- +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(dev->dev_addr, mac_addr); +- } else { ++ err = of_get_mac_address(np, dev->dev_addr); ++ if (err) { + eth_hw_addr_random(dev); + dev_info(&ofdev->dev, "Using random MAC address: %pM\n", dev->dev_addr); + } +--- a/drivers/net/ethernet/freescale/ucc_geth.c ++++ b/drivers/net/ethernet/freescale/ucc_geth.c +@@ -3696,7 +3696,6 @@ static int ucc_geth_probe(struct platfor + int err, ucc_num, max_speed = 0; + const unsigned int *prop; + const char *sprop; +- const void *mac_addr; + phy_interface_t phy_interface; + static const int enet_to_speed[] = { + SPEED_10, SPEED_10, SPEED_10, +@@ -3906,9 +3905,7 @@ static int ucc_geth_probe(struct platfor + goto err_free_netdev; + } + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(dev->dev_addr, mac_addr); ++ of_get_mac_address(np, dev->dev_addr); + + ugeth->ug_info = ug_info; + ugeth->dev = device; +--- a/drivers/net/ethernet/hisilicon/hisi_femac.c ++++ b/drivers/net/ethernet/hisilicon/hisi_femac.c +@@ -772,7 +772,6 @@ static int hisi_femac_drv_probe(struct p + struct net_device *ndev; + struct hisi_femac_priv *priv; + struct phy_device *phy; +- const char *mac_addr; + int ret; + + ndev = alloc_etherdev(sizeof(*priv)); +@@ -842,10 +841,8 @@ static int hisi_femac_drv_probe(struct p + (unsigned long)phy->phy_id, + phy_modes(phy->interface)); + +- mac_addr = of_get_mac_address(node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- if (!is_valid_ether_addr(ndev->dev_addr)) { ++ ret = of_get_mac_address(node, ndev->dev_addr); ++ if (ret) { + eth_hw_addr_random(ndev); + dev_warn(dev, "using random MAC address %pM\n", + ndev->dev_addr); +--- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c ++++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c +@@ -1098,7 +1098,6 @@ static int hix5hd2_dev_probe(struct plat + struct net_device *ndev; + struct hix5hd2_priv *priv; + struct mii_bus *bus; +- const char *mac_addr; + int ret; + + ndev = alloc_etherdev(sizeof(struct hix5hd2_priv)); +@@ -1220,10 +1219,8 @@ static int hix5hd2_dev_probe(struct plat + goto out_phy_node; + } + +- mac_addr = of_get_mac_address(node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- if (!is_valid_ether_addr(ndev->dev_addr)) { ++ ret = of_get_mac_address(node, ndev->dev_addr); ++ if (ret) { + eth_hw_addr_random(ndev); + netdev_warn(ndev, "using random MAC address %pM\n", + ndev->dev_addr); +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -440,7 +440,6 @@ static int xrx200_probe(struct platform_ + struct resource *res; + struct xrx200_priv *priv; + struct net_device *net_dev; +- const u8 *mac; + int err; + + /* alloc the network device */ +@@ -484,10 +483,8 @@ static int xrx200_probe(struct platform_ + return PTR_ERR(priv->clk); + } + +- mac = of_get_mac_address(np); +- if (!IS_ERR(mac)) +- ether_addr_copy(net_dev->dev_addr, mac); +- else ++ err = of_get_mac_address(np, net_dev->dev_addr); ++ if (err) + eth_hw_addr_random(net_dev); + + /* bring up the dma engine and IP core */ +--- a/drivers/net/ethernet/marvell/mv643xx_eth.c ++++ b/drivers/net/ethernet/marvell/mv643xx_eth.c +@@ -2700,7 +2700,6 @@ static int mv643xx_eth_shared_of_add_por + struct platform_device *ppdev; + struct mv643xx_eth_platform_data ppd; + struct resource res; +- const char *mac_addr; + int ret; + int dev_num = 0; + +@@ -2731,9 +2730,7 @@ static int mv643xx_eth_shared_of_add_por + return -EINVAL; + } + +- mac_addr = of_get_mac_address(pnp); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ppd.mac_addr, mac_addr); ++ of_get_mac_address(pnp, ppd.mac_addr); + + mv643xx_eth_property(pnp, "tx-queue-size", ppd.tx_queue_size); + mv643xx_eth_property(pnp, "tx-sram-addr", ppd.tx_sram_addr); +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -5062,7 +5062,6 @@ static int mvneta_probe(struct platform_ + struct net_device *dev; + struct phylink *phylink; + struct phy *comphy; +- const char *dt_mac_addr; + char hw_mac_addr[ETH_ALEN]; + phy_interface_t phy_mode; + const char *mac_from; +@@ -5158,10 +5157,9 @@ static int mvneta_probe(struct platform_ + goto err_free_ports; + } + +- dt_mac_addr = of_get_mac_address(dn); +- if (!IS_ERR(dt_mac_addr)) { ++ err = of_get_mac_address(dn, dev->dev_addr); ++ if (!err) { + mac_from = "device tree"; +- ether_addr_copy(dev->dev_addr, dt_mac_addr); + } else { + mvneta_get_mac_addr(pp, hw_mac_addr); + if (is_valid_ether_addr(hw_mac_addr)) { +--- a/drivers/net/ethernet/marvell/prestera/prestera_main.c ++++ b/drivers/net/ethernet/marvell/prestera/prestera_main.c +@@ -466,20 +466,17 @@ static int prestera_switch_set_base_mac_ + { + struct device_node *base_mac_np; + struct device_node *np; +- const char *base_mac; ++ int ret; + + np = of_find_compatible_node(NULL, NULL, "marvell,prestera"); + base_mac_np = of_parse_phandle(np, "base-mac-provider", 0); + +- base_mac = of_get_mac_address(base_mac_np); +- of_node_put(base_mac_np); +- if (!IS_ERR(base_mac)) +- ether_addr_copy(sw->base_mac, base_mac); +- +- if (!is_valid_ether_addr(sw->base_mac)) { ++ ret = of_get_mac_address(base_mac_np, sw->base_mac); ++ if (ret) { + eth_random_addr(sw->base_mac); + dev_info(prestera_dev(sw), "using random base mac address\n"); + } ++ of_node_put(base_mac_np); + + return prestera_hw_switch_mac_set(sw, sw->base_mac); + } +--- a/drivers/net/ethernet/marvell/pxa168_eth.c ++++ b/drivers/net/ethernet/marvell/pxa168_eth.c +@@ -1392,7 +1392,6 @@ static int pxa168_eth_probe(struct platf + struct resource *res; + struct clk *clk; + struct device_node *np; +- const unsigned char *mac_addr = NULL; + int err; + + printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n"); +@@ -1435,12 +1434,8 @@ static int pxa168_eth_probe(struct platf + + INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task); + +- if (pdev->dev.of_node) +- mac_addr = of_get_mac_address(pdev->dev.of_node); +- +- if (!IS_ERR_OR_NULL(mac_addr)) { +- ether_addr_copy(dev->dev_addr, mac_addr); +- } else { ++ err = of_get_mac_address(pdev->dev.of_node, dev->dev_addr); ++ if (err) { + /* try reading the mac address, if set by the bootloader */ + pxa168_eth_get_mac_address(dev, dev->dev_addr); + if (!is_valid_ether_addr(dev->dev_addr)) { +--- a/drivers/net/ethernet/marvell/sky2.c ++++ b/drivers/net/ethernet/marvell/sky2.c +@@ -4725,7 +4725,7 @@ static struct net_device *sky2_init_netd + { + struct sky2_port *sky2; + struct net_device *dev = alloc_etherdev(sizeof(*sky2)); +- const void *iap; ++ int ret; + + if (!dev) + return NULL; +@@ -4795,10 +4795,8 @@ static struct net_device *sky2_init_netd + * 1) from device tree data + * 2) from internal registers set by bootloader + */ +- iap = of_get_mac_address(hw->pdev->dev.of_node); +- if (!IS_ERR(iap)) +- ether_addr_copy(dev->dev_addr, iap); +- else ++ ret = of_get_mac_address(hw->pdev->dev.of_node, dev->dev_addr); ++ if (ret) + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, + ETH_ALEN); + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2580,14 +2580,11 @@ static int __init mtk_init(struct net_de + { + struct mtk_mac *mac = netdev_priv(dev); + struct mtk_eth *eth = mac->hw; +- const char *mac_addr; ++ int ret; + +- mac_addr = of_get_mac_address(mac->of_node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(dev->dev_addr, mac_addr); +- +- /* If the mac address is invalid, use random mac address */ +- if (!is_valid_ether_addr(dev->dev_addr)) { ++ ret = of_get_mac_address(mac->of_node, dev->dev_addr); ++ if (ret) { ++ /* If the mac address is invalid, use random mac address */ + eth_hw_addr_random(dev); + dev_err(eth->dev, "generated random MAC address %pM\n", + dev->dev_addr); +--- a/drivers/net/ethernet/micrel/ks8851_common.c ++++ b/drivers/net/ethernet/micrel/ks8851_common.c +@@ -194,11 +194,10 @@ static void ks8851_read_mac_addr(struct + static void ks8851_init_mac(struct ks8851_net *ks, struct device_node *np) + { + struct net_device *dev = ks->netdev; +- const u8 *mac_addr; ++ int ret; + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(dev->dev_addr, mac_addr); ++ ret = of_get_mac_address(np, dev->dev_addr); ++ if (!ret) { + ks8851_write_mac_addr(dev); + return; + } +--- a/drivers/net/ethernet/microchip/lan743x_main.c ++++ b/drivers/net/ethernet/microchip/lan743x_main.c +@@ -2831,7 +2831,6 @@ static int lan743x_pcidev_probe(struct p + { + struct lan743x_adapter *adapter = NULL; + struct net_device *netdev = NULL; +- const void *mac_addr; + int ret = -ENODEV; + + netdev = devm_alloc_etherdev(&pdev->dev, +@@ -2848,9 +2847,7 @@ static int lan743x_pcidev_probe(struct p + NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED; + netdev->max_mtu = LAN743X_MAX_FRAME_SIZE; + +- mac_addr = of_get_mac_address(pdev->dev.of_node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(adapter->mac_address, mac_addr); ++ of_get_mac_address(pdev->dev.of_node, adapter->mac_address); + + ret = lan743x_pci_init(adapter, pdev); + if (ret) +--- a/drivers/net/ethernet/nxp/lpc_eth.c ++++ b/drivers/net/ethernet/nxp/lpc_eth.c +@@ -1347,9 +1347,7 @@ static int lpc_eth_drv_probe(struct plat + __lpc_get_mac(pldat, ndev->dev_addr); + + if (!is_valid_ether_addr(ndev->dev_addr)) { +- const char *macaddr = of_get_mac_address(np); +- if (!IS_ERR(macaddr)) +- ether_addr_copy(ndev->dev_addr, macaddr); ++ of_get_mac_address(np, ndev->dev_addr); + } + if (!is_valid_ether_addr(ndev->dev_addr)) + eth_hw_addr_random(ndev); +--- a/drivers/net/ethernet/qualcomm/qca_spi.c ++++ b/drivers/net/ethernet/qualcomm/qca_spi.c +@@ -885,7 +885,7 @@ qca_spi_probe(struct spi_device *spi) + struct net_device *qcaspi_devs = NULL; + u8 legacy_mode = 0; + u16 signature; +- const char *mac; ++ int ret; + + if (!spi->dev.of_node) { + dev_err(&spi->dev, "Missing device tree\n"); +@@ -962,12 +962,8 @@ qca_spi_probe(struct spi_device *spi) + + spi_set_drvdata(spi, qcaspi_devs); + +- mac = of_get_mac_address(spi->dev.of_node); +- +- if (!IS_ERR(mac)) +- ether_addr_copy(qca->net_dev->dev_addr, mac); +- +- if (!is_valid_ether_addr(qca->net_dev->dev_addr)) { ++ ret = of_get_mac_address(spi->dev.of_node, qca->net_dev->dev_addr); ++ if (ret) { + eth_hw_addr_random(qca->net_dev); + dev_info(&spi->dev, "Using random MAC address: %pM\n", + qca->net_dev->dev_addr); +--- a/drivers/net/ethernet/qualcomm/qca_uart.c ++++ b/drivers/net/ethernet/qualcomm/qca_uart.c +@@ -323,7 +323,6 @@ static int qca_uart_probe(struct serdev_ + { + struct net_device *qcauart_dev = alloc_etherdev(sizeof(struct qcauart)); + struct qcauart *qca; +- const char *mac; + u32 speed = 115200; + int ret; + +@@ -348,12 +347,8 @@ static int qca_uart_probe(struct serdev_ + + of_property_read_u32(serdev->dev.of_node, "current-speed", &speed); + +- mac = of_get_mac_address(serdev->dev.of_node); +- +- if (!IS_ERR(mac)) +- ether_addr_copy(qca->net_dev->dev_addr, mac); +- +- if (!is_valid_ether_addr(qca->net_dev->dev_addr)) { ++ ret = of_get_mac_address(serdev->dev.of_node, qca->net_dev->dev_addr); ++ if (ret) { + eth_hw_addr_random(qca->net_dev); + dev_info(&serdev->dev, "Using random MAC address: %pM\n", + qca->net_dev->dev_addr); +--- a/drivers/net/ethernet/renesas/ravb_main.c ++++ b/drivers/net/ethernet/renesas/ravb_main.c +@@ -109,11 +109,13 @@ static void ravb_set_buffer_align(struct + * Ethernet AVB device doesn't have ROM for MAC address. + * This function gets the MAC address that was used by a bootloader. + */ +-static void ravb_read_mac_address(struct net_device *ndev, const u8 *mac) ++static void ravb_read_mac_address(struct device_node *np, ++ struct net_device *ndev) + { +- if (!IS_ERR(mac)) { +- ether_addr_copy(ndev->dev_addr, mac); +- } else { ++ int ret; ++ ++ ret = of_get_mac_address(np, ndev->dev_addr); ++ if (ret) { + u32 mahr = ravb_read(ndev, MAHR); + u32 malr = ravb_read(ndev, MALR); + +@@ -2189,7 +2191,7 @@ static int ravb_probe(struct platform_de + priv->msg_enable = RAVB_DEF_MSG_ENABLE; + + /* Read and set MAC address */ +- ravb_read_mac_address(ndev, of_get_mac_address(np)); ++ ravb_read_mac_address(np, ndev); + if (!is_valid_ether_addr(ndev->dev_addr)) { + dev_warn(&pdev->dev, + "no valid MAC address supplied, using a random one\n"); +--- a/drivers/net/ethernet/renesas/sh_eth.c ++++ b/drivers/net/ethernet/renesas/sh_eth.c +@@ -3145,7 +3145,6 @@ static struct sh_eth_plat_data *sh_eth_p + struct device_node *np = dev->of_node; + struct sh_eth_plat_data *pdata; + phy_interface_t interface; +- const char *mac_addr; + int ret; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); +@@ -3157,9 +3156,7 @@ static struct sh_eth_plat_data *sh_eth_p + return NULL; + pdata->phy_interface = interface; + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(pdata->mac_addr, mac_addr); ++ of_get_mac_address(np, pdata->mac_addr); + + pdata->no_ether_link = + of_property_read_bool(np, "renesas,no-ether-link"); +--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c ++++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c +@@ -25,8 +25,7 @@ + + #ifdef CONFIG_OF + static int sxgbe_probe_config_dt(struct platform_device *pdev, +- struct sxgbe_plat_data *plat, +- const char **mac) ++ struct sxgbe_plat_data *plat) + { + struct device_node *np = pdev->dev.of_node; + struct sxgbe_dma_cfg *dma_cfg; +@@ -35,7 +34,6 @@ static int sxgbe_probe_config_dt(struct + if (!np) + return -ENODEV; + +- *mac = of_get_mac_address(np); + err = of_get_phy_mode(np, &plat->interface); + if (err && err != -ENODEV) + return err; +@@ -63,8 +61,7 @@ static int sxgbe_probe_config_dt(struct + } + #else + static int sxgbe_probe_config_dt(struct platform_device *pdev, +- struct sxgbe_plat_data *plat, +- const char **mac) ++ struct sxgbe_plat_data *plat) + { + return -ENOSYS; + } +@@ -85,7 +82,6 @@ static int sxgbe_platform_probe(struct p + void __iomem *addr; + struct sxgbe_priv_data *priv = NULL; + struct sxgbe_plat_data *plat_dat = NULL; +- const char *mac = NULL; + struct net_device *ndev = platform_get_drvdata(pdev); + struct device_node *node = dev->of_node; + +@@ -101,7 +97,7 @@ static int sxgbe_platform_probe(struct p + if (!plat_dat) + return -ENOMEM; + +- ret = sxgbe_probe_config_dt(pdev, plat_dat, &mac); ++ ret = sxgbe_probe_config_dt(pdev, plat_dat); + if (ret) { + pr_err("%s: main dt probe failed\n", __func__); + return ret; +@@ -122,8 +118,7 @@ static int sxgbe_platform_probe(struct p + } + + /* Get MAC address if available (DT) */ +- if (!IS_ERR_OR_NULL(mac)) +- ether_addr_copy(priv->dev->dev_addr, mac); ++ of_get_mac_address(node, priv->dev->dev_addr); + + /* Get the TX/RX IRQ numbers */ + for (i = 0, chan = 1; i < SXGBE_TX_QUEUES; i++) { +--- a/drivers/net/ethernet/socionext/sni_ave.c ++++ b/drivers/net/ethernet/socionext/sni_ave.c +@@ -1559,7 +1559,6 @@ static int ave_probe(struct platform_dev + struct ave_private *priv; + struct net_device *ndev; + struct device_node *np; +- const void *mac_addr; + void __iomem *base; + const char *name; + int i, irq, ret; +@@ -1600,12 +1599,9 @@ static int ave_probe(struct platform_dev + + ndev->max_mtu = AVE_MAX_ETHFRAME - (ETH_HLEN + ETH_FCS_LEN); + +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- +- /* if the mac address is invalid, use random mac address */ +- if (!is_valid_ether_addr(ndev->dev_addr)) { ++ ret = of_get_mac_address(np, ndev->dev_addr); ++ if (ret) { ++ /* if the mac address is invalid, use random mac address */ + eth_hw_addr_random(ndev); + dev_warn(dev, "Using random MAC address: %pM\n", + ndev->dev_addr); +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c +@@ -115,7 +115,7 @@ static int anarion_dwmac_probe(struct pl + if (IS_ERR(gmac)) + return PTR_ERR(gmac); + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c +@@ -444,7 +444,7 @@ static int dwc_eth_dwmac_probe(struct pl + if (IS_ERR(stmmac_res.addr)) + return PTR_ERR(stmmac_res.addr); + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c +@@ -27,7 +27,7 @@ static int dwmac_generic_probe(struct pl + return ret; + + if (pdev->dev.of_node) { +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) { + dev_err(&pdev->dev, "dt configuration failed\n"); + return PTR_ERR(plat_dat); +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c +@@ -226,7 +226,7 @@ static int imx_dwmac_probe(struct platfo + if (!dwmac) + return -ENOMEM; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c +@@ -88,7 +88,7 @@ static int intel_eth_plat_probe(struct p + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) { + dev_err(&pdev->dev, "dt configuration failed\n"); + return PTR_ERR(plat_dat); +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +@@ -255,7 +255,7 @@ static int ipq806x_gmac_probe(struct pla + if (val) + return val; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c +@@ -37,7 +37,7 @@ static int lpc18xx_dwmac_probe(struct pl + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c +@@ -407,7 +407,7 @@ static int mediatek_dwmac_probe(struct p + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c +@@ -52,7 +52,7 @@ static int meson6_dwmac_probe(struct pla + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +@@ -372,7 +372,7 @@ static int meson8b_dwmac_probe(struct pl + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c +@@ -118,7 +118,7 @@ static int oxnas_dwmac_probe(struct plat + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +@@ -461,7 +461,7 @@ static int qcom_ethqos_probe(struct plat + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) { + dev_err(&pdev->dev, "dt configuration failed\n"); + return PTR_ERR(plat_dat); +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +@@ -1392,7 +1392,7 @@ static int rk_gmac_probe(struct platform + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +@@ -398,7 +398,7 @@ static int socfpga_dwmac_probe(struct pl + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c +@@ -325,7 +325,7 @@ static int sti_dwmac_probe(struct platfo + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c +@@ -371,7 +371,7 @@ static int stm32_dwmac_probe(struct plat + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +@@ -1202,7 +1202,7 @@ static int sun8i_dwmac_probe(struct plat + if (ret) + return -EINVAL; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c +@@ -108,7 +108,7 @@ static int sun7i_gmac_probe(struct platf + if (ret) + return ret; + +- plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); ++ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h +@@ -25,7 +25,7 @@ + + struct stmmac_resources { + void __iomem *addr; +- const char *mac; ++ u8 mac[ETH_ALEN]; + int wol_irq; + int lpi_irq; + int irq; +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +@@ -4988,7 +4988,7 @@ int stmmac_dvr_probe(struct device *devi + priv->wol_irq = res->wol_irq; + priv->lpi_irq = res->lpi_irq; + +- if (!IS_ERR_OR_NULL(res->mac)) ++ if (!is_zero_ether_addr(res->mac)) + memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN); + + dev_set_drvdata(device, priv->dev); +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +@@ -395,7 +395,7 @@ static int stmmac_of_get_mac_mode(struct + * set some private fields that will be used by the main at runtime. + */ + struct plat_stmmacenet_data * +-stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) ++stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) + { + struct device_node *np = pdev->dev.of_node; + struct plat_stmmacenet_data *plat; +@@ -407,12 +407,12 @@ stmmac_probe_config_dt(struct platform_d + if (!plat) + return ERR_PTR(-ENOMEM); + +- *mac = of_get_mac_address(np); +- if (IS_ERR(*mac)) { +- if (PTR_ERR(*mac) == -EPROBE_DEFER) +- return ERR_CAST(*mac); ++ rc = of_get_mac_address(np, mac); ++ if (rc) { ++ if (rc == -EPROBE_DEFER) ++ return ERR_PTR(rc); + +- *mac = NULL; ++ eth_zero_addr(mac); + } + + phy_mode = device_get_phy_mode(&pdev->dev); +@@ -644,7 +644,7 @@ void stmmac_remove_config_dt(struct plat + } + #else + struct plat_stmmacenet_data * +-stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) ++stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) + { + return ERR_PTR(-EINVAL); + } +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h +@@ -12,7 +12,7 @@ + #include "stmmac.h" + + struct plat_stmmacenet_data * +-stmmac_probe_config_dt(struct platform_device *pdev, const char **mac); ++stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac); + void stmmac_remove_config_dt(struct platform_device *pdev, + struct plat_stmmacenet_data *plat); + +--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c ++++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c +@@ -1741,7 +1741,6 @@ static int am65_cpsw_nuss_init_slave_por + + for_each_child_of_node(node, port_np) { + struct am65_cpsw_port *port; +- const void *mac_addr; + u32 port_id; + + /* it is not a slave port node, continue */ +@@ -1820,15 +1819,15 @@ static int am65_cpsw_nuss_init_slave_por + return ret; + } + +- mac_addr = of_get_mac_address(port_np); +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(port->slave.mac_addr, mac_addr); +- } else if (am65_cpsw_am654_get_efuse_macid(port_np, +- port->port_id, +- port->slave.mac_addr) || +- !is_valid_ether_addr(port->slave.mac_addr)) { +- random_ether_addr(port->slave.mac_addr); +- dev_err(dev, "Use random MAC address\n"); ++ ret = of_get_mac_address(port_np, port->slave.mac_addr); ++ if (ret) { ++ am65_cpsw_am654_get_efuse_macid(port_np, ++ port->port_id, ++ port->slave.mac_addr); ++ if (!is_valid_ether_addr(port->slave.mac_addr)) { ++ random_ether_addr(port->slave.mac_addr); ++ dev_err(dev, "Use random MAC address\n"); ++ } + } + } + of_node_put(node); +--- a/drivers/net/ethernet/ti/cpsw.c ++++ b/drivers/net/ethernet/ti/cpsw.c +@@ -1306,7 +1306,6 @@ static int cpsw_probe_dt(struct cpsw_pla + + for_each_available_child_of_node(node, slave_node) { + struct cpsw_slave_data *slave_data = data->slave_data + i; +- const void *mac_addr = NULL; + int lenp; + const __be32 *parp; + +@@ -1378,10 +1377,8 @@ static int cpsw_probe_dt(struct cpsw_pla + } + + no_phy_slave: +- mac_addr = of_get_mac_address(slave_node); +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(slave_data->mac_addr, mac_addr); +- } else { ++ ret = of_get_mac_address(slave_node, slave_data->mac_addr); ++ if (ret) { + ret = ti_cm_get_macid(&pdev->dev, i, + slave_data->mac_addr); + if (ret) +--- a/drivers/net/ethernet/ti/cpsw_new.c ++++ b/drivers/net/ethernet/ti/cpsw_new.c +@@ -1267,7 +1267,6 @@ static int cpsw_probe_dt(struct cpsw_com + + for_each_child_of_node(tmp_node, port_np) { + struct cpsw_slave_data *slave_data; +- const void *mac_addr; + u32 port_id; + + ret = of_property_read_u32(port_np, "reg", &port_id); +@@ -1326,10 +1325,8 @@ static int cpsw_probe_dt(struct cpsw_com + goto err_node_put; + } + +- mac_addr = of_get_mac_address(port_np); +- if (!IS_ERR(mac_addr)) { +- ether_addr_copy(slave_data->mac_addr, mac_addr); +- } else { ++ ret = of_get_mac_address(port_np, slave_data->mac_addr); ++ if (ret) { + ret = ti_cm_get_macid(dev, port_id - 1, + slave_data->mac_addr); + if (ret) +--- a/drivers/net/ethernet/ti/davinci_emac.c ++++ b/drivers/net/ethernet/ti/davinci_emac.c +@@ -1699,7 +1699,6 @@ davinci_emac_of_get_pdata(struct platfor + const struct of_device_id *match; + const struct emac_platform_data *auxdata; + struct emac_platform_data *pdata = NULL; +- const u8 *mac_addr; + + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) + return dev_get_platdata(&pdev->dev); +@@ -1711,11 +1710,8 @@ davinci_emac_of_get_pdata(struct platfor + np = pdev->dev.of_node; + pdata->version = EMAC_VERSION_2; + +- if (!is_valid_ether_addr(pdata->mac_addr)) { +- mac_addr = of_get_mac_address(np); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(pdata->mac_addr, mac_addr); +- } ++ if (!is_valid_ether_addr(pdata->mac_addr)) ++ of_get_mac_address(np, pdata->mac_addr); + + of_property_read_u32(np, "ti,davinci-ctrl-reg-offset", + &pdata->ctrl_reg_offset); +--- a/drivers/net/ethernet/ti/netcp_core.c ++++ b/drivers/net/ethernet/ti/netcp_core.c +@@ -1966,7 +1966,6 @@ static int netcp_create_interface(struct + struct resource res; + void __iomem *efuse = NULL; + u32 efuse_mac = 0; +- const void *mac_addr; + u8 efuse_mac_addr[6]; + u32 temp[2]; + int ret = 0; +@@ -2036,10 +2035,8 @@ static int netcp_create_interface(struct + devm_iounmap(dev, efuse); + devm_release_mem_region(dev, res.start, size); + } else { +- mac_addr = of_get_mac_address(node_interface); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(ndev->dev_addr, mac_addr); +- else ++ ret = of_get_mac_address(node_interface, ndev->dev_addr); ++ if (ret) + eth_random_addr(ndev->dev_addr); + } + +--- a/drivers/net/ethernet/wiznet/w5100-spi.c ++++ b/drivers/net/ethernet/wiznet/w5100-spi.c +@@ -423,8 +423,14 @@ static int w5100_spi_probe(struct spi_de + const struct of_device_id *of_id; + const struct w5100_ops *ops; + kernel_ulong_t driver_data; ++ const void *mac = NULL; ++ u8 tmpmac[ETH_ALEN]; + int priv_size; +- const void *mac = of_get_mac_address(spi->dev.of_node); ++ int ret; ++ ++ ret = of_get_mac_address(spi->dev.of_node, tmpmac); ++ if (!ret) ++ mac = tmpmac; + + if (spi->dev.of_node) { + of_id = of_match_device(w5100_of_match, &spi->dev); +--- a/drivers/net/ethernet/wiznet/w5100.c ++++ b/drivers/net/ethernet/wiznet/w5100.c +@@ -1159,7 +1159,7 @@ int w5100_probe(struct device *dev, cons + INIT_WORK(&priv->setrx_work, w5100_setrx_work); + INIT_WORK(&priv->restart_work, w5100_restart_work); + +- if (!IS_ERR_OR_NULL(mac_addr)) ++ if (mac_addr) + memcpy(ndev->dev_addr, mac_addr, ETH_ALEN); + else + eth_hw_addr_random(ndev); +--- a/drivers/net/ethernet/xilinx/ll_temac_main.c ++++ b/drivers/net/ethernet/xilinx/ll_temac_main.c +@@ -438,7 +438,7 @@ static void temac_do_set_mac_address(str + + static int temac_init_mac_address(struct net_device *ndev, const void *address) + { +- ether_addr_copy(ndev->dev_addr, address); ++ memcpy(ndev->dev_addr, address, ETH_ALEN); + if (!is_valid_ether_addr(ndev->dev_addr)) + eth_hw_addr_random(ndev); + temac_do_set_mac_address(ndev); +@@ -1370,7 +1370,7 @@ static int temac_probe(struct platform_d + struct device_node *temac_np = dev_of_node(&pdev->dev), *dma_np; + struct temac_local *lp; + struct net_device *ndev; +- const void *addr; ++ u8 addr[ETH_ALEN]; + __be32 *p; + bool little_endian; + int rc = 0; +@@ -1563,8 +1563,8 @@ static int temac_probe(struct platform_d + + if (temac_np) { + /* Retrieve the MAC address */ +- addr = of_get_mac_address(temac_np); +- if (IS_ERR(addr)) { ++ rc = of_get_mac_address(temac_np, addr); ++ if (rc) { + dev_err(&pdev->dev, "could not find MAC address\n"); + return -ENODEV; + } +--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c ++++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +@@ -1831,8 +1831,8 @@ static int axienet_probe(struct platform + struct device_node *np; + struct axienet_local *lp; + struct net_device *ndev; +- const void *mac_addr; + struct resource *ethres; ++ u8 mac_addr[ETH_ALEN]; + int addr_width = 32; + u32 value; + +@@ -2032,13 +2032,14 @@ static int axienet_probe(struct platform + dev_info(&pdev->dev, "Ethernet core IRQ not defined\n"); + + /* Retrieve the MAC address */ +- mac_addr = of_get_mac_address(pdev->dev.of_node); +- if (IS_ERR(mac_addr)) { +- dev_warn(&pdev->dev, "could not find MAC address property: %ld\n", +- PTR_ERR(mac_addr)); +- mac_addr = NULL; ++ ret = of_get_mac_address(pdev->dev.of_node, mac_addr); ++ if (!ret) { ++ axienet_set_mac_address(ndev, mac_addr); ++ } else { ++ dev_warn(&pdev->dev, "could not find MAC address property: %d\n", ++ ret); ++ axienet_set_mac_address(ndev, NULL); + } +- axienet_set_mac_address(ndev, mac_addr); + + lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; + lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; +--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c ++++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c +@@ -1113,7 +1113,6 @@ static int xemaclite_of_probe(struct pla + struct net_device *ndev = NULL; + struct net_local *lp = NULL; + struct device *dev = &ofdev->dev; +- const void *mac_address; + + int rc = 0; + +@@ -1155,12 +1154,9 @@ static int xemaclite_of_probe(struct pla + lp->next_rx_buf_to_use = 0x0; + lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); + lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); +- mac_address = of_get_mac_address(ofdev->dev.of_node); + +- if (!IS_ERR(mac_address)) { +- /* Set the MAC address. */ +- ether_addr_copy(ndev->dev_addr, mac_address); +- } else { ++ rc = of_get_mac_address(ofdev->dev.of_node, ndev->dev_addr); ++ if (rc) { + dev_warn(dev, "No MAC address found, using random\n"); + eth_hw_addr_random(ndev); + } +--- a/drivers/net/wireless/ath/ath9k/init.c ++++ b/drivers/net/wireless/ath/ath9k/init.c +@@ -618,7 +618,6 @@ static int ath9k_of_init(struct ath_soft + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + enum ath_bus_type bus_type = common->bus_ops->ath_bus_type; +- const char *mac; + char eeprom_name[100]; + int ret; + +@@ -641,9 +640,7 @@ static int ath9k_of_init(struct ath_soft + ah->ah_flags |= AH_NO_EEP_SWAP; + } + +- mac = of_get_mac_address(np); +- if (!IS_ERR(mac)) +- ether_addr_copy(common->macaddr, mac); ++ of_get_mac_address(np, common->macaddr); + + return 0; + } +--- a/drivers/net/wireless/mediatek/mt76/eeprom.c ++++ b/drivers/net/wireless/mediatek/mt76/eeprom.c +@@ -90,15 +90,9 @@ out_put_node: + void + mt76_eeprom_override(struct mt76_dev *dev) + { +-#ifdef CONFIG_OF + struct device_node *np = dev->dev->of_node; +- const u8 *mac = NULL; + +- if (np) +- mac = of_get_mac_address(np); +- if (!IS_ERR_OR_NULL(mac)) +- ether_addr_copy(dev->macaddr, mac); +-#endif ++ of_get_mac_address(np, dev->macaddr); + + if (!is_valid_ether_addr(dev->macaddr)) { + eth_random_addr(dev->macaddr); +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -990,11 +990,7 @@ static void rt2x00lib_rate(struct ieee80 + + void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr) + { +- const char *mac_addr; +- +- mac_addr = of_get_mac_address(rt2x00dev->dev->of_node); +- if (!IS_ERR(mac_addr)) +- ether_addr_copy(eeprom_mac_addr, mac_addr); ++ of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr); + + if (!is_valid_ether_addr(eeprom_mac_addr)) { + eth_random_addr(eeprom_mac_addr); +--- a/drivers/of/of_net.c ++++ b/drivers/of/of_net.c +@@ -45,37 +45,29 @@ int of_get_phy_mode(struct device_node * + } + EXPORT_SYMBOL_GPL(of_get_phy_mode); + +-static const void *of_get_mac_addr(struct device_node *np, const char *name) ++static int of_get_mac_addr(struct device_node *np, const char *name, u8 *addr) + { + struct property *pp = of_find_property(np, name, NULL); + +- if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) +- return pp->value; +- return NULL; ++ if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) { ++ memcpy(addr, pp->value, ETH_ALEN); ++ return 0; ++ } ++ return -ENODEV; + } + +-static const void *of_get_mac_addr_nvmem(struct device_node *np) ++static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr) + { +- int ret; +- const void *mac; +- u8 nvmem_mac[ETH_ALEN]; + struct platform_device *pdev = of_find_device_by_node(np); ++ int ret; + + if (!pdev) +- return ERR_PTR(-ENODEV); ++ return -ENODEV; + +- ret = nvmem_get_mac_address(&pdev->dev, &nvmem_mac); +- if (ret) { +- put_device(&pdev->dev); +- return ERR_PTR(ret); +- } +- +- mac = devm_kmemdup(&pdev->dev, nvmem_mac, ETH_ALEN, GFP_KERNEL); ++ ret = nvmem_get_mac_address(&pdev->dev, addr); + put_device(&pdev->dev); +- if (!mac) +- return ERR_PTR(-ENOMEM); + +- return mac; ++ return ret; + } + + /** +@@ -98,24 +90,27 @@ static const void *of_get_mac_addr_nvmem + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. + * +- * Return: Will be a valid pointer on success and ERR_PTR in case of error. ++ * Return: 0 on success and errno in case of error. + */ +-const void *of_get_mac_address(struct device_node *np) ++int of_get_mac_address(struct device_node *np, u8 *addr) + { +- const void *addr; +- +- addr = of_get_mac_addr(np, "mac-address"); +- if (addr) +- return addr; ++ int ret; + +- addr = of_get_mac_addr(np, "local-mac-address"); +- if (addr) +- return addr; ++ if (!np) ++ return -ENODEV; + +- addr = of_get_mac_addr(np, "address"); +- if (addr) +- return addr; ++ ret = of_get_mac_addr(np, "mac-address", addr); ++ if (!ret) ++ return 0; ++ ++ ret = of_get_mac_addr(np, "local-mac-address", addr); ++ if (!ret) ++ return 0; ++ ++ ret = of_get_mac_addr(np, "address", addr); ++ if (!ret) ++ return 0; + +- return of_get_mac_addr_nvmem(np); ++ return of_get_mac_addr_nvmem(np, addr); + } + EXPORT_SYMBOL(of_get_mac_address); +--- a/drivers/staging/octeon/ethernet.c ++++ b/drivers/staging/octeon/ethernet.c +@@ -407,14 +407,10 @@ static int cvm_oct_common_set_mac_addres + int cvm_oct_common_init(struct net_device *dev) + { + struct octeon_ethernet *priv = netdev_priv(dev); +- const u8 *mac = NULL; ++ int ret; + +- if (priv->of_node) +- mac = of_get_mac_address(priv->of_node); +- +- if (!IS_ERR_OR_NULL(mac)) +- ether_addr_copy(dev->dev_addr, mac); +- else ++ ret = of_get_mac_address(priv->of_node, dev->dev_addr); ++ if (ret) + eth_hw_addr_random(dev); + + /* +--- a/drivers/staging/wfx/main.c ++++ b/drivers/staging/wfx/main.c +@@ -334,7 +334,6 @@ int wfx_probe(struct wfx_dev *wdev) + { + int i; + int err; +- const void *macaddr; + struct gpio_desc *gpio_saved; + + // During first part of boot, gpio_wakeup cannot yet been used. So +@@ -423,9 +422,9 @@ int wfx_probe(struct wfx_dev *wdev) + + for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) { + eth_zero_addr(wdev->addresses[i].addr); +- macaddr = of_get_mac_address(wdev->dev->of_node); +- if (!IS_ERR_OR_NULL(macaddr)) { +- ether_addr_copy(wdev->addresses[i].addr, macaddr); ++ err = of_get_mac_address(wdev->dev->of_node, ++ wdev->addresses[i].addr); ++ if (!err) { + wdev->addresses[i].addr[ETH_ALEN - 1] += i; + } else { + ether_addr_copy(wdev->addresses[i].addr, +--- a/include/linux/of_net.h ++++ b/include/linux/of_net.h +@@ -13,7 +13,7 @@ + + struct net_device; + extern int of_get_phy_mode(struct device_node *np, phy_interface_t *interface); +-extern const void *of_get_mac_address(struct device_node *np); ++extern int of_get_mac_address(struct device_node *np, u8 *mac); + extern struct net_device *of_find_net_device_by_node(struct device_node *np); + #else + static inline int of_get_phy_mode(struct device_node *np, +@@ -22,9 +22,9 @@ static inline int of_get_phy_mode(struct + return -ENODEV; + } + +-static inline const void *of_get_mac_address(struct device_node *np) ++static inline int of_get_mac_address(struct device_node *np, u8 *mac) + { +- return ERR_PTR(-ENODEV); ++ return -ENODEV; + } + + static inline struct net_device *of_find_net_device_by_node(struct device_node *np) +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -208,7 +208,7 @@ struct dsa_port { + unsigned int index; + const char *name; + struct dsa_port *cpu_dp; +- const char *mac; ++ u8 mac[ETH_ALEN]; + struct device_node *dn; + unsigned int ageing_time; + bool vlan_filtering; +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -288,7 +288,7 @@ static int dsa_port_setup(struct dsa_por + + break; + case DSA_PORT_TYPE_USER: +- dp->mac = of_get_mac_address(dp->dn); ++ of_get_mac_address(dp->dn, dp->mac); + err = dsa_slave_create(dp); + if (err) + break; +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -1855,7 +1855,7 @@ int dsa_slave_create(struct dsa_port *po + slave_dev->hw_features |= NETIF_F_HW_TC; + slave_dev->features |= NETIF_F_LLTX; + slave_dev->ethtool_ops = &dsa_slave_ethtool_ops; +- if (!IS_ERR_OR_NULL(port->mac)) ++ if (!is_zero_ether_addr(port->mac)) + ether_addr_copy(slave_dev->dev_addr, port->mac); + else + eth_hw_addr_inherit(slave_dev, master); +--- a/net/ethernet/eth.c ++++ b/net/ethernet/eth.c +@@ -506,13 +506,14 @@ unsigned char * __weak arch_get_platform + + int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr) + { +- const unsigned char *addr = NULL; ++ unsigned char *addr; ++ int ret; + +- if (dev->of_node) +- addr = of_get_mac_address(dev->of_node); +- if (IS_ERR_OR_NULL(addr)) +- addr = arch_get_platform_mac_address(); ++ ret = of_get_mac_address(dev->of_node, mac_addr); ++ if (!ret) ++ return 0; + ++ addr = arch_get_platform_mac_address(); + if (!addr) + return -ENODEV; + diff --git a/target/linux/generic/backport-5.15/732-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch b/target/linux/generic/backport-5.15/732-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch new file mode 100644 index 0000000000..245c5f3bd6 --- /dev/null +++ b/target/linux/generic/backport-5.15/732-net-next-2-of-net-fix-of_get_mac_addr_nvmem-for-non-platform-devices.patch @@ -0,0 +1,77 @@ +From f10843e04a075202dbb39dfcee047e3a2fdf5a8d Mon Sep 17 00:00:00 2001 +From: Michael Walle +Date: Mon, 12 Apr 2021 19:47:18 +0200 +Subject: of: net: fix of_get_mac_addr_nvmem() for non-platform devices + +of_get_mac_address() already supports fetching the MAC address by an +nvmem provider. But until now, it was just working for platform devices. +Esp. it was not working for DSA ports and PCI devices. It gets more +common that PCI devices have a device tree binding since SoCs contain +integrated root complexes. + +Use the nvmem of_* binding to fetch the nvmem cells by a struct +device_node. We still have to try to read the cell by device first +because there might be a nvmem_cell_lookup associated with that device. + +Signed-off-by: Michael Walle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/of/of_net.c | 35 ++++++++++++++++++++++++++++++----- + 1 file changed, 30 insertions(+), 5 deletions(-) + +--- a/drivers/of/of_net.c ++++ b/drivers/of/of_net.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + + /** + * of_get_phy_mode - Get phy mode for given device_node +@@ -59,15 +60,39 @@ static int of_get_mac_addr(struct device + static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr) + { + struct platform_device *pdev = of_find_device_by_node(np); ++ struct nvmem_cell *cell; ++ const void *mac; ++ size_t len; + int ret; + +- if (!pdev) +- return -ENODEV; ++ /* Try lookup by device first, there might be a nvmem_cell_lookup ++ * associated with a given device. ++ */ ++ if (pdev) { ++ ret = nvmem_get_mac_address(&pdev->dev, addr); ++ put_device(&pdev->dev); ++ return ret; ++ } ++ ++ cell = of_nvmem_cell_get(np, "mac-address"); ++ if (IS_ERR(cell)) ++ return PTR_ERR(cell); ++ ++ mac = nvmem_cell_read(cell, &len); ++ nvmem_cell_put(cell); ++ ++ if (IS_ERR(mac)) ++ return PTR_ERR(mac); ++ ++ if (len != ETH_ALEN || !is_valid_ether_addr(mac)) { ++ kfree(mac); ++ return -EINVAL; ++ } + +- ret = nvmem_get_mac_address(&pdev->dev, addr); +- put_device(&pdev->dev); ++ memcpy(addr, mac, ETH_ALEN); ++ kfree(mac); + +- return ret; ++ return 0; + } + + /** diff --git a/target/linux/generic/backport-5.15/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch b/target/linux/generic/backport-5.15/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch new file mode 100644 index 0000000000..6e7f20634f --- /dev/null +++ b/target/linux/generic/backport-5.15/733-v5.15-0001-net-bgmac-bcma-handle-deferred-probe-error-due-to-ma.patch @@ -0,0 +1,42 @@ +From 029497e66bdc762e001880e4c85a91f35a54b1e2 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 19 Sep 2021 13:57:25 +0200 +Subject: [PATCH] net: bgmac-bcma: handle deferred probe error due to + mac-address +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Due to the inclusion of nvmem handling into the mac-address getter +function of_get_mac_address() by +commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") +it is now possible to get a -EPROBE_DEFER return code. Which did cause +bgmac to assign a random ethernet address. + +This exact issue happened on my Meraki MR32. The nvmem provider is +an EEPROM (at24c64) which gets instantiated once the module +driver is loaded... This happens once the filesystem becomes available. + +With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. +Then the driver subsystem will reschedule the probe at a later time. + +Cc: Petr Å tetiar +Cc: Michael Walle +Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") +Signed-off-by: Christian Lamparter +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c ++++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c +@@ -129,6 +129,8 @@ static int bgmac_probe(struct bcma_devic + bcma_set_drvdata(core, bgmac); + + err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr); ++ if (err == -EPROBE_DEFER) ++ return err; + + /* If no MAC address assigned via device tree, check SPROM */ + if (err) { diff --git a/target/linux/generic/backport-5.15/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch b/target/linux/generic/backport-5.15/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch new file mode 100644 index 0000000000..bde62f3b1b --- /dev/null +++ b/target/linux/generic/backport-5.15/733-v5.15-0002-net-bgmac-platform-handle-mac-address-deferral.patch @@ -0,0 +1,36 @@ +From 763716a55cb1f480ffe1a9702e6b5d9ea1a80a24 Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Sat, 25 Sep 2021 11:36:27 +0000 +Subject: [PATCH] net: bgmac-platform: handle mac-address deferral + +This patch is a replication of Christian Lamparter's "net: bgmac-bcma: +handle deferred probe error due to mac-address" patch for the +bgmac-platform driver [1]. + +As is the case with the bgmac-bcma driver, this change is to cover the +scenario where the MAC address cannot yet be discovered due to reliance +on an nvmem provider which is yet to be instantiated, resulting in a +random address being assigned that has to be manually overridden. + +[1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com + +Signed-off-by: Matthew Hagan +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/broadcom/bgmac-platform.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bgmac-platform.c ++++ b/drivers/net/ethernet/broadcom/bgmac-platform.c +@@ -193,6 +193,9 @@ static int bgmac_probe(struct platform_d + bgmac->dma_dev = &pdev->dev; + + ret = of_get_mac_address(np, bgmac->net_dev->dev_addr); ++ if (ret == -EPROBE_DEFER) ++ return ret; ++ + if (ret) + dev_warn(&pdev->dev, + "MAC address not present in device tree\n"); diff --git a/target/linux/generic/backport-5.15/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch b/target/linux/generic/backport-5.15/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch new file mode 100644 index 0000000000..6788a2ec35 --- /dev/null +++ b/target/linux/generic/backport-5.15/734-v5.16-0001-net-bgmac-improve-handling-PHY.patch @@ -0,0 +1,84 @@ +From b5375509184dc23d2b7fa0c5ed8763899ccc9674 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 2 Oct 2021 19:58:11 +0200 +Subject: [PATCH] net: bgmac: improve handling PHY +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +1. Use info from DT if available + +It allows describing for example a fixed link. It's more accurate than +just guessing there may be one (depending on a chipset). + +2. Verify PHY ID before trying to connect PHY + +PHY addr 0x1e (30) is special in Broadcom routers and means a switch +connected as MDIO devices instead of a real PHY. Don't try connecting to +it. + +Signed-off-by: Rafał Miłecki +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/broadcom/bgmac-bcma.c | 33 ++++++++++++++-------- + 1 file changed, 21 insertions(+), 12 deletions(-) + +--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c ++++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include "bgmac.h" + +@@ -86,17 +87,28 @@ static int bcma_phy_connect(struct bgmac + struct phy_device *phy_dev; + char bus_id[MII_BUS_ID_SIZE + 3]; + ++ /* DT info should be the most accurate */ ++ phy_dev = of_phy_get_and_connect(bgmac->net_dev, bgmac->dev->of_node, ++ bgmac_adjust_link); ++ if (phy_dev) ++ return 0; ++ + /* Connect to the PHY */ +- snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id, +- bgmac->phyaddr); +- phy_dev = phy_connect(bgmac->net_dev, bus_id, bgmac_adjust_link, +- PHY_INTERFACE_MODE_MII); +- if (IS_ERR(phy_dev)) { +- dev_err(bgmac->dev, "PHY connection failed\n"); +- return PTR_ERR(phy_dev); ++ if (bgmac->mii_bus && bgmac->phyaddr != BGMAC_PHY_NOREGS) { ++ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, bgmac->mii_bus->id, ++ bgmac->phyaddr); ++ phy_dev = phy_connect(bgmac->net_dev, bus_id, bgmac_adjust_link, ++ PHY_INTERFACE_MODE_MII); ++ if (IS_ERR(phy_dev)) { ++ dev_err(bgmac->dev, "PHY connection failed\n"); ++ return PTR_ERR(phy_dev); ++ } ++ ++ return 0; + } + +- return 0; ++ /* Assume a fixed link to the switch port */ ++ return bgmac_phy_connect_direct(bgmac); + } + + static const struct bcma_device_id bgmac_bcma_tbl[] = { +@@ -297,10 +309,7 @@ static int bgmac_probe(struct bcma_devic + bgmac->cco_ctl_maskset = bcma_bgmac_cco_ctl_maskset; + bgmac->get_bus_clock = bcma_bgmac_get_bus_clock; + bgmac->cmn_maskset32 = bcma_bgmac_cmn_maskset32; +- if (bgmac->mii_bus) +- bgmac->phy_connect = bcma_phy_connect; +- else +- bgmac->phy_connect = bgmac_phy_connect_direct; ++ bgmac->phy_connect = bcma_phy_connect; + + err = bgmac_enet_probe(bgmac); + if (err) diff --git a/target/linux/generic/backport-5.15/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch b/target/linux/generic/backport-5.15/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch new file mode 100644 index 0000000000..f134828273 --- /dev/null +++ b/target/linux/generic/backport-5.15/734-v5.16-0002-net-bgmac-support-MDIO-described-in-DT.patch @@ -0,0 +1,54 @@ +From 45c9d966688e7fad7f24bfc450547d91e4304d0b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 2 Oct 2021 19:58:12 +0200 +Subject: [PATCH] net: bgmac: support MDIO described in DT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Check ethernet controller DT node for "mdio" subnode and use it with +of_mdiobus_register() when present. That allows specifying MDIO and its +PHY devices in a standard DT based way. + +This is required for BCM53573 SoC support. That family is sometimes +called Northstar (by marketing?) but is quite different from it. It uses +different CPU(s) and many different hw blocks. + +One of shared blocks in BCM53573 is Ethernet controller. Switch however +is not SRAB accessible (as it Northstar) but is MDIO attached. + +Signed-off-by: Rafał Miłecki +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c ++++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c +@@ -10,6 +10,7 @@ + + #include + #include ++#include + #include "bgmac.h" + + static bool bcma_mdio_wait_value(struct bcma_device *core, u16 reg, u32 mask, +@@ -211,6 +212,7 @@ struct mii_bus *bcma_mdio_mii_register(s + { + struct bcma_device *core = bgmac->bcma.core; + struct mii_bus *mii_bus; ++ struct device_node *np; + int err; + + mii_bus = mdiobus_alloc(); +@@ -229,7 +231,9 @@ struct mii_bus *bcma_mdio_mii_register(s + mii_bus->parent = &core->dev; + mii_bus->phy_mask = ~(1 << bgmac->phyaddr); + +- err = mdiobus_register(mii_bus); ++ np = of_get_child_by_name(core->dev.of_node, "mdio"); ++ ++ err = of_mdiobus_register(mii_bus, np); + if (err) { + dev_err(&core->dev, "Registration of mii bus failed\n"); + goto err_free_bus; diff --git a/target/linux/generic/backport-5.15/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch b/target/linux/generic/backport-5.15/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch new file mode 100644 index 0000000000..b8e6d9b613 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-01-net-dsa-qca8k-change-simple-print-to-dev-variant.patch @@ -0,0 +1,35 @@ +From 5d9e068402dcf7354cc8ee66c2152845306d2ccb Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:51 +0200 +Subject: [PATCH] net: dsa: qca8k: change simple print to dev variant + +Change pr_err and pr_warn to dev variant. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -701,7 +701,7 @@ qca8k_setup(struct dsa_switch *ds) + + /* Make sure that port 0 is the cpu port */ + if (!dsa_is_cpu_port(ds, 0)) { +- pr_err("port 0 is not the CPU port\n"); ++ dev_err(priv->dev, "port 0 is not the CPU port"); + return -EINVAL; + } + +@@ -711,7 +711,7 @@ qca8k_setup(struct dsa_switch *ds) + priv->regmap = devm_regmap_init(ds->dev, NULL, priv, + &qca8k_regmap_config); + if (IS_ERR(priv->regmap)) +- pr_warn("regmap initialization failed"); ++ dev_warn(priv->dev, "regmap initialization failed"); + + ret = qca8k_setup_mdio_bus(priv); + if (ret) diff --git a/target/linux/generic/backport-5.15/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch b/target/linux/generic/backport-5.15/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch new file mode 100644 index 0000000000..ff8288d484 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-02-net-dsa-qca8k-use-iopoll-macro-for-qca8k_busy_wait.patch @@ -0,0 +1,61 @@ +From 2ad255f2faaffb3af786031fba2e7955454b558a Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:52 +0200 +Subject: [PATCH] net: dsa: qca8k: use iopoll macro for qca8k_busy_wait + +Use iopoll macro instead of while loop. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 23 +++++++++++------------ + drivers/net/dsa/qca8k.h | 2 ++ + 2 files changed, 13 insertions(+), 12 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -262,21 +262,20 @@ static struct regmap_config qca8k_regmap + static int + qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) + { +- unsigned long timeout; ++ u32 val; ++ int ret; + +- timeout = jiffies + msecs_to_jiffies(20); ++ ret = read_poll_timeout(qca8k_read, val, !(val & mask), ++ 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, ++ priv, reg); + +- /* loop until the busy flag has cleared */ +- do { +- u32 val = qca8k_read(priv, reg); +- int busy = val & mask; ++ /* Check if qca8k_read has failed for a different reason ++ * before returning -ETIMEDOUT ++ */ ++ if (ret < 0 && val < 0) ++ return val; + +- if (!busy) +- break; +- cond_resched(); +- } while (!time_after_eq(jiffies, timeout)); +- +- return time_after_eq(jiffies, timeout); ++ return ret; + } + + static void +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -18,6 +18,8 @@ + #define PHY_ID_QCA8337 0x004dd036 + #define QCA8K_ID_QCA8337 0x13 + ++#define QCA8K_BUSY_WAIT_TIMEOUT 20 ++ + #define QCA8K_NUM_FDB_RECORDS 2048 + + #define QCA8K_CPU_PORT 0 diff --git a/target/linux/generic/backport-5.15/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch b/target/linux/generic/backport-5.15/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch new file mode 100644 index 0000000000..c403589874 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-03-net-dsa-qca8k-improve-qca8k-read-write-rmw-bus-acces.patch @@ -0,0 +1,86 @@ +From 504bf65931824eda83494e5b5d75686e27ace03e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:53 +0200 +Subject: [PATCH] net: dsa: qca8k: improve qca8k read/write/rmw bus access + +Put bus in local variable to improve faster access to the mdio bus. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 29 ++++++++++++++++------------- + 1 file changed, 16 insertions(+), 13 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -142,17 +142,18 @@ qca8k_set_page(struct mii_bus *bus, u16 + static u32 + qca8k_read(struct qca8k_priv *priv, u32 reg) + { ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + + qca8k_split_addr(reg, &r1, &r2, &page); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(priv->bus, page); +- val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1); ++ qca8k_set_page(bus, page); ++ val = qca8k_mii_read32(bus, 0x10 | r2, r1); + +- mutex_unlock(&priv->bus->mdio_lock); ++ mutex_unlock(&bus->mdio_lock); + + return val; + } +@@ -160,35 +161,37 @@ qca8k_read(struct qca8k_priv *priv, u32 + static void + qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) + { ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + + qca8k_split_addr(reg, &r1, &r2, &page); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(priv->bus, page); +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); ++ qca8k_set_page(bus, page); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, val); + +- mutex_unlock(&priv->bus->mdio_lock); ++ mutex_unlock(&bus->mdio_lock); + } + + static u32 + qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val) + { ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 ret; + + qca8k_split_addr(reg, &r1, &r2, &page); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(priv->bus, page); +- ret = qca8k_mii_read32(priv->bus, 0x10 | r2, r1); ++ qca8k_set_page(bus, page); ++ ret = qca8k_mii_read32(bus, 0x10 | r2, r1); + ret &= ~mask; + ret |= val; +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, ret); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, ret); + +- mutex_unlock(&priv->bus->mdio_lock); ++ mutex_unlock(&bus->mdio_lock); + + return ret; + } diff --git a/target/linux/generic/backport-5.15/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch b/target/linux/generic/backport-5.15/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch new file mode 100644 index 0000000000..6be494a8c7 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-04-net-dsa-qca8k-handle-qca8k_set_page-errors.patch @@ -0,0 +1,101 @@ +From ba5707ec58cfb6853dff41c2aae72deb6a03d389 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:54 +0200 +Subject: [PATCH] net: dsa: qca8k: handle qca8k_set_page errors + +With a remote possibility, the set_page function can fail. Since this is +a critical part of the write/read qca8k regs, propagate the error and +terminate any read/write operation. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 33 ++++++++++++++++++++++++++------- + 1 file changed, 26 insertions(+), 7 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -127,16 +127,23 @@ qca8k_mii_write32(struct mii_bus *bus, i + "failed to write qca8k 32bit register\n"); + } + +-static void ++static int + qca8k_set_page(struct mii_bus *bus, u16 page) + { ++ int ret; ++ + if (page == qca8k_current_page) +- return; ++ return 0; + +- if (bus->write(bus, 0x18, 0, page) < 0) ++ ret = bus->write(bus, 0x18, 0, page); ++ if (ret < 0) { + dev_err_ratelimited(&bus->dev, + "failed to set qca8k page\n"); ++ return ret; ++ } ++ + qca8k_current_page = page; ++ return 0; + } + + static u32 +@@ -150,11 +157,14 @@ qca8k_read(struct qca8k_priv *priv, u32 + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(bus, page); ++ val = qca8k_set_page(bus, page); ++ if (val < 0) ++ goto exit; ++ + val = qca8k_mii_read32(bus, 0x10 | r2, r1); + ++exit: + mutex_unlock(&bus->mdio_lock); +- + return val; + } + +@@ -163,14 +173,19 @@ qca8k_write(struct qca8k_priv *priv, u32 + { + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; ++ int ret; + + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(bus, page); ++ ret = qca8k_set_page(bus, page); ++ if (ret < 0) ++ goto exit; ++ + qca8k_mii_write32(bus, 0x10 | r2, r1, val); + ++exit: + mutex_unlock(&bus->mdio_lock); + } + +@@ -185,12 +200,16 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- qca8k_set_page(bus, page); ++ ret = qca8k_set_page(bus, page); ++ if (ret < 0) ++ goto exit; ++ + ret = qca8k_mii_read32(bus, 0x10 | r2, r1); + ret &= ~mask; + ret |= val; + qca8k_mii_write32(bus, 0x10 | r2, r1, ret); + ++exit: + mutex_unlock(&bus->mdio_lock); + + return ret; diff --git a/target/linux/generic/backport-5.15/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch b/target/linux/generic/backport-5.15/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch new file mode 100644 index 0000000000..3349b7897a --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-05-net-dsa-qca8k-handle-error-with-qca8k_read-operation.patch @@ -0,0 +1,207 @@ +From 028f5f8ef44fcf87a456772cbb9f0d90a0a22884 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:55 +0200 +Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_read operation + +qca8k_read can fail. Rework any user to handle error values and +correctly return. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 73 ++++++++++++++++++++++++++++++++--------- + 1 file changed, 58 insertions(+), 15 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -231,8 +231,13 @@ static int + qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; ++ int ret; ++ ++ ret = qca8k_read(priv, reg); ++ if (ret < 0) ++ return ret; + +- *val = qca8k_read(priv, reg); ++ *val = ret; + + return 0; + } +@@ -300,15 +305,20 @@ qca8k_busy_wait(struct qca8k_priv *priv, + return ret; + } + +-static void ++static int + qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb) + { +- u32 reg[4]; ++ u32 reg[4], val; + int i; + + /* load the ARL table into an array */ +- for (i = 0; i < 4; i++) +- reg[i] = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4)); ++ for (i = 0; i < 4; i++) { ++ val = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4)); ++ if (val < 0) ++ return val; ++ ++ reg[i] = val; ++ } + + /* vid - 83:72 */ + fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M; +@@ -323,6 +333,8 @@ qca8k_fdb_read(struct qca8k_priv *priv, + fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff; + fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff; + fdb->mac[5] = reg[0] & 0xff; ++ ++ return 0; + } + + static void +@@ -374,6 +386,8 @@ qca8k_fdb_access(struct qca8k_priv *priv + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_FDB_LOAD) { + reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC); ++ if (reg < 0) ++ return reg; + if (reg & QCA8K_ATU_FUNC_FULL) + return -1; + } +@@ -388,10 +402,10 @@ qca8k_fdb_next(struct qca8k_priv *priv, + + qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging); + ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port); +- if (ret >= 0) +- qca8k_fdb_read(priv, fdb); ++ if (ret < 0) ++ return ret; + +- return ret; ++ return qca8k_fdb_read(priv, fdb); + } + + static int +@@ -449,6 +463,8 @@ qca8k_vlan_access(struct qca8k_priv *pri + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_VLAN_LOAD) { + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1); ++ if (reg < 0) ++ return reg; + if (reg & QCA8K_VTU_FUNC1_FULL) + return -ENOMEM; + } +@@ -475,6 +491,8 @@ qca8k_vlan_add(struct qca8k_priv *priv, + goto out; + + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); ++ if (reg < 0) ++ return reg; + reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN; + reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + if (untagged) +@@ -506,6 +524,8 @@ qca8k_vlan_del(struct qca8k_priv *priv, + goto out; + + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); ++ if (reg < 0) ++ return reg; + reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT << + QCA8K_VTU_FUNC0_EG_MODE_S(port); +@@ -621,8 +641,11 @@ qca8k_mdio_read(struct qca8k_priv *priv, + QCA8K_MDIO_MASTER_BUSY)) + return -ETIMEDOUT; + +- val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) & +- QCA8K_MDIO_MASTER_DATA_MASK); ++ val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL); ++ if (val < 0) ++ return val; ++ ++ val &= QCA8K_MDIO_MASTER_DATA_MASK; + + return val; + } +@@ -978,6 +1001,8 @@ qca8k_phylink_mac_link_state(struct dsa_ + u32 reg; + + reg = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port)); ++ if (reg < 0) ++ return reg; + + state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); + state->an_complete = state->link; +@@ -1078,18 +1103,26 @@ qca8k_get_ethtool_stats(struct dsa_switc + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + const struct qca8k_mib_desc *mib; +- u32 reg, i; ++ u32 reg, i, val; + u64 hi; + + for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) { + mib = &ar8327_mib[i]; + reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset; + +- data[i] = qca8k_read(priv, reg); ++ val = qca8k_read(priv, reg); ++ if (val < 0) ++ continue; ++ + if (mib->size == 2) { + hi = qca8k_read(priv, reg + 4); +- data[i] |= hi << 32; ++ if (hi < 0) ++ continue; + } ++ ++ data[i] = val; ++ if (mib->size == 2) ++ data[i] |= hi << 32; + } + } + +@@ -1107,18 +1140,25 @@ qca8k_set_mac_eee(struct dsa_switch *ds, + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port); ++ int ret = 0; + u32 reg; + + mutex_lock(&priv->reg_mutex); + reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL); ++ if (reg < 0) { ++ ret = reg; ++ goto exit; ++ } ++ + if (eee->eee_enabled) + reg |= lpi_en; + else + reg &= ~lpi_en; + qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg); +- mutex_unlock(&priv->reg_mutex); + +- return 0; ++exit: ++ mutex_unlock(&priv->reg_mutex); ++ return ret; + } + + static int +@@ -1456,6 +1496,9 @@ qca8k_sw_probe(struct mdio_device *mdiod + + /* read the switches ID register */ + id = qca8k_read(priv, QCA8K_REG_MASK_CTRL); ++ if (id < 0) ++ return id; ++ + id >>= QCA8K_MASK_CTRL_ID_S; + id &= QCA8K_MASK_CTRL_ID_M; + if (id != QCA8K_ID_QCA8337) diff --git a/target/linux/generic/backport-5.15/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch b/target/linux/generic/backport-5.15/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch new file mode 100644 index 0000000000..1e0e224c39 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-06-net-dsa-qca8k-handle-error-with-qca8k_write-operatio.patch @@ -0,0 +1,263 @@ +From d7805757c75c76e9518fc1023a29f0c4eed5b581 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:56 +0200 +Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_write operation + +qca8k_write can fail. Rework any user to handle error values and +correctly return. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 102 ++++++++++++++++++++++++++-------------- + 1 file changed, 67 insertions(+), 35 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -168,7 +168,7 @@ exit: + return val; + } + +-static void ++static int + qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) + { + struct mii_bus *bus = priv->bus; +@@ -187,6 +187,7 @@ qca8k_write(struct qca8k_priv *priv, u32 + + exit: + mutex_unlock(&bus->mdio_lock); ++ return ret; + } + + static u32 +@@ -247,9 +248,7 @@ qca8k_regmap_write(void *ctx, uint32_t r + { + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + +- qca8k_write(priv, reg, val); +- +- return 0; ++ return qca8k_write(priv, reg, val); + } + + static const struct regmap_range qca8k_readable_ranges[] = { +@@ -367,6 +366,7 @@ static int + qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port) + { + u32 reg; ++ int ret; + + /* Set the command and FDB index */ + reg = QCA8K_ATU_FUNC_BUSY; +@@ -377,7 +377,9 @@ qca8k_fdb_access(struct qca8k_priv *priv + } + + /* Write the function register triggering the table access */ +- qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg); ++ ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg); ++ if (ret) ++ return ret; + + /* wait for completion */ + if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY)) +@@ -447,6 +449,7 @@ static int + qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid) + { + u32 reg; ++ int ret; + + /* Set the command and VLAN index */ + reg = QCA8K_VTU_FUNC1_BUSY; +@@ -454,7 +457,9 @@ qca8k_vlan_access(struct qca8k_priv *pri + reg |= vid << QCA8K_VTU_FUNC1_VID_S; + + /* Write the function register triggering the table access */ +- qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg); ++ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg); ++ if (ret) ++ return ret; + + /* wait for completion */ + if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY)) +@@ -502,7 +507,9 @@ qca8k_vlan_add(struct qca8k_priv *priv, + reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG << + QCA8K_VTU_FUNC0_EG_MODE_S(port); + +- qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); ++ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); ++ if (ret) ++ return ret; + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); + + out: +@@ -545,7 +552,9 @@ qca8k_vlan_del(struct qca8k_priv *priv, + if (del) { + ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid); + } else { +- qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); ++ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); ++ if (ret) ++ return ret; + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); + } + +@@ -555,15 +564,20 @@ out: + return ret; + } + +-static void ++static int + qca8k_mib_init(struct qca8k_priv *priv) + { ++ int ret; ++ + mutex_lock(&priv->reg_mutex); + qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); + qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY); + qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); +- qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB); ++ ++ ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB); ++ + mutex_unlock(&priv->reg_mutex); ++ return ret; + } + + static void +@@ -600,6 +614,7 @@ static int + qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data) + { + u32 phy, val; ++ int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; +@@ -613,7 +628,9 @@ qca8k_mdio_write(struct qca8k_priv *priv + QCA8K_MDIO_MASTER_REG_ADDR(regnum) | + QCA8K_MDIO_MASTER_DATA(data); + +- qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); ++ ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); ++ if (ret) ++ return ret; + + return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); +@@ -623,6 +640,7 @@ static int + qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum) + { + u32 phy, val; ++ int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; +@@ -635,7 +653,9 @@ qca8k_mdio_read(struct qca8k_priv *priv, + QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); + +- qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); ++ ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); ++ if (ret) ++ return ret; + + if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY)) +@@ -766,12 +786,18 @@ qca8k_setup(struct dsa_switch *ds) + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); + + /* Enable MIB counters */ +- qca8k_mib_init(priv); ++ ret = qca8k_mib_init(priv); ++ if (ret) ++ dev_warn(priv->dev, "mib init failed"); + + /* Enable QCA header mode on the cpu port */ +- qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT), +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); ++ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT), ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); ++ if (ret) { ++ dev_err(priv->dev, "failed enabling QCA header mode"); ++ return ret; ++ } + + /* Disable forwarding by default on all ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) +@@ -783,11 +809,13 @@ qca8k_setup(struct dsa_switch *ds) + qca8k_port_set_status(priv, i, 0); + + /* Forward all unknown frames to CPU port for Linux processing */ +- qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); ++ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, ++ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | ++ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | ++ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | ++ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); ++ if (ret) ++ return ret; + + /* Setup connection between CPU port & user ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { +@@ -815,16 +843,20 @@ qca8k_setup(struct dsa_switch *ds) + qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), + 0xfff << shift, + QCA8K_PORT_VID_DEF << shift); +- qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), +- QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | +- QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); ++ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), ++ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | ++ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); ++ if (ret) ++ return ret; + } + } + + /* Setup our port MTUs to match power on defaults */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) + priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; +- qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); ++ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); ++ if (ret) ++ dev_warn(priv->dev, "failed setting MTU settings"); + + /* Flush the FDB table */ + qca8k_fdb_flush(priv); +@@ -1140,8 +1172,8 @@ qca8k_set_mac_eee(struct dsa_switch *ds, + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port); +- int ret = 0; + u32 reg; ++ int ret; + + mutex_lock(&priv->reg_mutex); + reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL); +@@ -1154,7 +1186,7 @@ qca8k_set_mac_eee(struct dsa_switch *ds, + reg |= lpi_en; + else + reg &= ~lpi_en; +- qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg); ++ ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg); + + exit: + mutex_unlock(&priv->reg_mutex); +@@ -1284,9 +1316,7 @@ qca8k_port_change_mtu(struct dsa_switch + mtu = priv->port_mtu[i]; + + /* Include L2 header / FCS length */ +- qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN); +- +- return 0; ++ return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN); + } + + static int diff --git a/target/linux/generic/backport-5.15/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch b/target/linux/generic/backport-5.15/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch new file mode 100644 index 0000000000..506966f1af --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-07-net-dsa-qca8k-handle-error-with-qca8k_rmw-operation.patch @@ -0,0 +1,226 @@ +From aaf421425cbdec4eb6fd75a29e65c2867b0b7bbd Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:57 +0200 +Subject: [PATCH] net: dsa: qca8k: handle error with qca8k_rmw operation + +qca8k_rmw can fail. Rework any user to handle error values and +correctly return. Change qca8k_rmw to return the error code or 0 instead +of the reg value. The reg returned by qca8k_rmw wasn't used anywhere, +so this doesn't cause any functional change. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 133 +++++++++++++++++++++++++--------------- + 1 file changed, 83 insertions(+), 50 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -190,12 +190,13 @@ exit: + return ret; + } + +-static u32 +-qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 val) ++static int ++qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) + { + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; +- u32 ret; ++ u32 val; ++ int ret; + + qca8k_split_addr(reg, &r1, &r2, &page); + +@@ -205,10 +206,15 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r + if (ret < 0) + goto exit; + +- ret = qca8k_mii_read32(bus, 0x10 | r2, r1); +- ret &= ~mask; +- ret |= val; +- qca8k_mii_write32(bus, 0x10 | r2, r1, ret); ++ val = qca8k_mii_read32(bus, 0x10 | r2, r1); ++ if (val < 0) { ++ ret = val; ++ goto exit; ++ } ++ ++ val &= ~mask; ++ val |= write_val; ++ qca8k_mii_write32(bus, 0x10 | r2, r1, val); + + exit: + mutex_unlock(&bus->mdio_lock); +@@ -216,16 +222,16 @@ exit: + return ret; + } + +-static void ++static int + qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val) + { +- qca8k_rmw(priv, reg, 0, val); ++ return qca8k_rmw(priv, reg, 0, val); + } + +-static void ++static int + qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val) + { +- qca8k_rmw(priv, reg, val, 0); ++ return qca8k_rmw(priv, reg, val, 0); + } + + static int +@@ -570,12 +576,19 @@ qca8k_mib_init(struct qca8k_priv *priv) + int ret; + + mutex_lock(&priv->reg_mutex); +- qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); ++ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); ++ if (ret) ++ goto exit; ++ + qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY); +- qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); ++ ++ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); ++ if (ret) ++ goto exit; + + ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB); + ++exit: + mutex_unlock(&priv->reg_mutex); + return ret; + } +@@ -747,9 +760,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + * a dt-overlay and driver reload changed the configuration + */ + +- qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_EN); +- return 0; ++ return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_EN); + } + + priv->ops.phy_read = qca8k_phy_read; +@@ -782,8 +794,12 @@ qca8k_setup(struct dsa_switch *ds) + return ret; + + /* Enable CPU Port */ +- qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, +- QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); ++ ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, ++ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); ++ if (ret) { ++ dev_err(priv->dev, "failed enabling CPU port"); ++ return ret; ++ } + + /* Enable MIB counters */ + ret = qca8k_mib_init(priv); +@@ -800,9 +816,12 @@ qca8k_setup(struct dsa_switch *ds) + } + + /* Disable forwarding by default on all ports */ +- for (i = 0; i < QCA8K_NUM_PORTS; i++) +- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), +- QCA8K_PORT_LOOKUP_MEMBER, 0); ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), ++ QCA8K_PORT_LOOKUP_MEMBER, 0); ++ if (ret) ++ return ret; ++ } + + /* Disable MAC by default on all ports */ + for (i = 1; i < QCA8K_NUM_PORTS; i++) +@@ -821,28 +840,37 @@ qca8k_setup(struct dsa_switch *ds) + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { +- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), +- QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), ++ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); ++ if (ret) ++ return ret; + } + + /* Individual user ports get connected to CPU port only */ + if (dsa_is_user_port(ds, i)) { + int shift = 16 * (i % 2); + +- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), +- QCA8K_PORT_LOOKUP_MEMBER, +- BIT(QCA8K_CPU_PORT)); ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), ++ QCA8K_PORT_LOOKUP_MEMBER, ++ BIT(QCA8K_CPU_PORT)); ++ if (ret) ++ return ret; + + /* Enable ARP Auto-learning by default */ +- qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i), +- QCA8K_PORT_LOOKUP_LEARN); ++ ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i), ++ QCA8K_PORT_LOOKUP_LEARN); ++ if (ret) ++ return ret; + + /* For port based vlans to work we need to set the + * default egress vid + */ +- qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), +- 0xfff << shift, +- QCA8K_PORT_VID_DEF << shift); ++ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), ++ 0xfff << shift, ++ QCA8K_PORT_VID_DEF << shift); ++ if (ret) ++ return ret; ++ + ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), + QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | + QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); +@@ -1234,7 +1262,7 @@ qca8k_port_bridge_join(struct dsa_switch + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + int port_mask = BIT(QCA8K_CPU_PORT); +- int i; ++ int i, ret; + + for (i = 1; i < QCA8K_NUM_PORTS; i++) { + if (dsa_to_port(ds, i)->bridge_dev != br) +@@ -1242,17 +1270,20 @@ qca8k_port_bridge_join(struct dsa_switch + /* Add this port to the portvlan mask of the other ports + * in the bridge + */ +- qca8k_reg_set(priv, +- QCA8K_PORT_LOOKUP_CTRL(i), +- BIT(port)); ++ ret = qca8k_reg_set(priv, ++ QCA8K_PORT_LOOKUP_CTRL(i), ++ BIT(port)); ++ if (ret) ++ return ret; + if (i != port) + port_mask |= BIT(i); + } ++ + /* Add all other ports to this ports portvlan mask */ +- qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), +- QCA8K_PORT_LOOKUP_MEMBER, port_mask); ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), ++ QCA8K_PORT_LOOKUP_MEMBER, port_mask); + +- return 0; ++ return ret; + } + + static void diff --git a/target/linux/generic/backport-5.15/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch b/target/linux/generic/backport-5.15/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch new file mode 100644 index 0000000000..360ce1d947 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-08-net-dsa-qca8k-handle-error-from-qca8k_busy_wait.patch @@ -0,0 +1,66 @@ +From b7c818d194927bdc60ed15db55bb8654496a36b7 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:58 +0200 +Subject: [PATCH] net: dsa: qca8k: handle error from qca8k_busy_wait + +Propagate errors from qca8k_busy_wait instead of hardcoding return +value. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 21 +++++++++++++-------- + 1 file changed, 13 insertions(+), 8 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -388,8 +388,9 @@ qca8k_fdb_access(struct qca8k_priv *priv + return ret; + + /* wait for completion */ +- if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY)) +- return -1; ++ ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY); ++ if (ret) ++ return ret; + + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_FDB_LOAD) { +@@ -468,8 +469,9 @@ qca8k_vlan_access(struct qca8k_priv *pri + return ret; + + /* wait for completion */ +- if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY)) +- return -ETIMEDOUT; ++ ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY); ++ if (ret) ++ return ret; + + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_VLAN_LOAD) { +@@ -580,7 +582,9 @@ qca8k_mib_init(struct qca8k_priv *priv) + if (ret) + goto exit; + +- qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY); ++ ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY); ++ if (ret) ++ goto exit; + + ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); + if (ret) +@@ -670,9 +674,10 @@ qca8k_mdio_read(struct qca8k_priv *priv, + if (ret) + return ret; + +- if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_BUSY)) +- return -ETIMEDOUT; ++ ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_BUSY); ++ if (ret) ++ return ret; + + val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL); + if (val < 0) diff --git a/target/linux/generic/backport-5.15/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch b/target/linux/generic/backport-5.15/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch new file mode 100644 index 0000000000..72305850ca --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-09-net-dsa-qca8k-add-support-for-qca8327-switch.patch @@ -0,0 +1,96 @@ +From 6e82a457e06252b59102486767539cc9c2aba60b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 22:59:59 +0200 +Subject: [PATCH] net: dsa: qca8k: add support for qca8327 switch + +qca8327 switch is a low tier version of the more recent qca8337. +It does share the same regs used by the qca8k driver and can be +supported with minimal change. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++--- + drivers/net/dsa/qca8k.h | 6 ++++++ + 2 files changed, 26 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1533,6 +1533,7 @@ static const struct dsa_switch_ops qca8k + static int + qca8k_sw_probe(struct mdio_device *mdiodev) + { ++ const struct qca8k_match_data *data; + struct qca8k_priv *priv; + u32 id; + +@@ -1560,6 +1561,11 @@ qca8k_sw_probe(struct mdio_device *mdiod + gpiod_set_value_cansleep(priv->reset_gpio, 0); + } + ++ /* get the switches ID from the compatible */ ++ data = of_device_get_match_data(&mdiodev->dev); ++ if (!data) ++ return -ENODEV; ++ + /* read the switches ID register */ + id = qca8k_read(priv, QCA8K_REG_MASK_CTRL); + if (id < 0) +@@ -1567,8 +1573,10 @@ qca8k_sw_probe(struct mdio_device *mdiod + + id >>= QCA8K_MASK_CTRL_ID_S; + id &= QCA8K_MASK_CTRL_ID_M; +- if (id != QCA8K_ID_QCA8337) ++ if (id != data->id) { ++ dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id); + return -ENODEV; ++ } + + priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) +@@ -1634,9 +1642,18 @@ static int qca8k_resume(struct device *d + static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, + qca8k_suspend, qca8k_resume); + ++static const struct qca8k_match_data qca832x = { ++ .id = QCA8K_ID_QCA8327, ++}; ++ ++static const struct qca8k_match_data qca833x = { ++ .id = QCA8K_ID_QCA8337, ++}; ++ + static const struct of_device_id qca8k_of_match[] = { +- { .compatible = "qca,qca8334" }, +- { .compatible = "qca,qca8337" }, ++ { .compatible = "qca,qca8327", .data = &qca832x }, ++ { .compatible = "qca,qca8334", .data = &qca833x }, ++ { .compatible = "qca,qca8337", .data = &qca833x }, + { /* sentinel */ }, + }; + +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -15,6 +15,8 @@ + #define QCA8K_NUM_PORTS 7 + #define QCA8K_MAX_MTU 9000 + ++#define PHY_ID_QCA8327 0x004dd034 ++#define QCA8K_ID_QCA8327 0x12 + #define PHY_ID_QCA8337 0x004dd036 + #define QCA8K_ID_QCA8337 0x13 + +@@ -213,6 +215,10 @@ struct ar8xxx_port_status { + int enabled; + }; + ++struct qca8k_match_data { ++ u8 id; ++}; ++ + struct qca8k_priv { + struct regmap *regmap; + struct mii_bus *bus; diff --git a/target/linux/generic/backport-5.15/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch b/target/linux/generic/backport-5.15/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch new file mode 100644 index 0000000000..3c4a14bd0b --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-10-devicetree-net-dsa-qca8k-Document-new-compatible-qca.patch @@ -0,0 +1,26 @@ +From 227a9ffc1bc77037339530607fe129af3824620e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:00 +0200 +Subject: [PATCH] devicetree: net: dsa: qca8k: Document new compatible qca8327 + +Add support for qca8327 in the compatible list. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Acked-by: Rob Herring +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 1 + + 1 file changed, 1 insertion(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -3,6 +3,7 @@ + Required properties: + + - compatible: should be one of: ++ "qca,qca8327" + "qca,qca8334" + "qca,qca8337" + diff --git a/target/linux/generic/backport-5.15/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch b/target/linux/generic/backport-5.15/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch new file mode 100644 index 0000000000..cd3050ef71 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-11-net-dsa-qca8k-add-priority-tweak-to-qca8337-switch.patch @@ -0,0 +1,130 @@ +From 83a3ceb39b2495171aabe9446271b94c678354f3 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:01 +0200 +Subject: [PATCH] net: dsa: qca8k: add priority tweak to qca8337 switch + +The port 5 of the qca8337 have some problem in flood condition. The +original legacy driver had some specific buffer and priority settings +for the different port suggested by the QCA switch team. Add this +missing settings to improve switch stability under load condition. +The packet priority tweak is only needed for the qca8337 switch and +other qca8k switch are not affected. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 47 +++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 25 ++++++++++++++++++++++ + 2 files changed, 72 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -779,6 +779,7 @@ qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + int ret, i; ++ u32 mask; + + /* Make sure that port 0 is the cpu port */ + if (!dsa_is_cpu_port(ds, 0)) { +@@ -884,6 +885,51 @@ qca8k_setup(struct dsa_switch *ds) + } + } + ++ /* The port 5 of the qca8337 have some problem in flood condition. The ++ * original legacy driver had some specific buffer and priority settings ++ * for the different port suggested by the QCA switch team. Add this ++ * missing settings to improve switch stability under load condition. ++ * This problem is limited to qca8337 and other qca8k switch are not affected. ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8337) { ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ switch (i) { ++ /* The 2 CPU port and port 5 requires some different ++ * priority than any other ports. ++ */ ++ case 0: ++ case 5: ++ case 6: ++ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | ++ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); ++ break; ++ default: ++ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | ++ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | ++ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); ++ } ++ qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask); ++ ++ mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | ++ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | ++ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | ++ QCA8K_PORT_HOL_CTRL1_WRED_EN; ++ qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i), ++ QCA8K_PORT_HOL_CTRL1_ING_BUF | ++ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | ++ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | ++ QCA8K_PORT_HOL_CTRL1_WRED_EN, ++ mask); ++ } ++ } ++ + /* Setup our port MTUs to match power on defaults */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) + priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; +@@ -1578,6 +1624,7 @@ qca8k_sw_probe(struct mdio_device *mdiod + return -ENODEV; + } + ++ priv->switch_id = id; + priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -168,6 +168,30 @@ + #define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16) + #define QCA8K_PORT_LOOKUP_LEARN BIT(20) + ++#define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF GENMASK(7, 4) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) ((x) << 4) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF GENMASK(11, 8) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) ((x) << 8) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF GENMASK(15, 12) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) ((x) << 12) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF GENMASK(19, 16) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) ((x) << 16) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF GENMASK(23, 20) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) ((x) << 20) ++#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF GENMASK(29, 24) ++#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) ((x) << 24) ++ ++#define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) ++#define QCA8K_PORT_HOL_CTRL1_ING_BUF GENMASK(3, 0) ++#define QCA8K_PORT_HOL_CTRL1_ING(x) ((x) << 0) ++#define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6) ++#define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7) ++#define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8) ++#define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) ++ + /* Pkt edit registers */ + #define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2))) + +@@ -220,6 +244,7 @@ struct qca8k_match_data { + }; + + struct qca8k_priv { ++ u8 switch_id; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.15/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch b/target/linux/generic/backport-5.15/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch new file mode 100644 index 0000000000..d25edbb1aa --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-12-net-dsa-qca8k-limit-port5-delay-to-qca8337.patch @@ -0,0 +1,31 @@ +From 5bf9ff3b9fb5ecb67a1a3517b26db3a00f2a2f11 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:02 +0200 +Subject: [PATCH] net: dsa: qca8k: limit port5 delay to qca8337 + +Limit port5 rx delay to qca8337. This is taken from the legacy QSDK code +that limits the rx delay on port5 to only this particular switch version, +on other switch only the tx and rx delay for port0 are needed. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1003,8 +1003,10 @@ qca8k_phylink_mac_config(struct dsa_swit + QCA8K_PORT_PAD_RGMII_EN | + QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) | + QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY)); +- qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); ++ /* QCA8337 requires to set rgmii rx delay */ ++ if (priv->switch_id == QCA8K_ID_QCA8337) ++ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: diff --git a/target/linux/generic/backport-5.15/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch b/target/linux/generic/backport-5.15/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch new file mode 100644 index 0000000000..2b393d242a --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-13-net-dsa-qca8k-add-GLOBAL_FC-settings-needed-for-qca8.patch @@ -0,0 +1,48 @@ +From 0fc57e4b5e39461fc0a54aae0afe4241363a7267 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:03 +0200 +Subject: [PATCH] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 + +Switch qca8327 needs special settings for the GLOBAL_FC_THRES regs. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 10 ++++++++++ + drivers/net/dsa/qca8k.h | 6 ++++++ + 2 files changed, 16 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -930,6 +930,16 @@ qca8k_setup(struct dsa_switch *ds) + } + } + ++ /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ ++ if (priv->switch_id == QCA8K_ID_QCA8327) { ++ mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | ++ QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); ++ qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, ++ QCA8K_GLOBAL_FC_GOL_XON_THRES_S | ++ QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S, ++ mask); ++ } ++ + /* Setup our port MTUs to match power on defaults */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) + priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -168,6 +168,12 @@ + #define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16) + #define QCA8K_PORT_LOOKUP_LEARN BIT(20) + ++#define QCA8K_REG_GLOBAL_FC_THRESH 0x800 ++#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16) ++#define QCA8K_GLOBAL_FC_GOL_XON_THRES_S GENMASK(24, 16) ++#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) ((x) << 0) ++#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S GENMASK(8, 0) ++ + #define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8) + #define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0) + #define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0) diff --git a/target/linux/generic/backport-5.15/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch b/target/linux/generic/backport-5.15/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch new file mode 100644 index 0000000000..ed9b8188de --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-14-net-dsa-qca8k-add-support-for-switch-rev.patch @@ -0,0 +1,114 @@ +From 95ffeaf18b3bb90eeef52cbf7d79ccc9d0345ff5 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:04 +0200 +Subject: [PATCH] net: dsa: qca8k: add support for switch rev + +qca8k internal phy driver require some special debug value to be set +based on the switch revision. Rework the switch id read function to +also read the chip revision. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 53 ++++++++++++++++++++++++++--------------- + drivers/net/dsa/qca8k.h | 7 ++++-- + 2 files changed, 39 insertions(+), 21 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1588,12 +1588,40 @@ static const struct dsa_switch_ops qca8k + .phylink_mac_link_up = qca8k_phylink_mac_link_up, + }; + ++static int qca8k_read_switch_id(struct qca8k_priv *priv) ++{ ++ const struct qca8k_match_data *data; ++ u32 val; ++ u8 id; ++ ++ /* get the switches ID from the compatible */ ++ data = of_device_get_match_data(priv->dev); ++ if (!data) ++ return -ENODEV; ++ ++ val = qca8k_read(priv, QCA8K_REG_MASK_CTRL); ++ if (val < 0) ++ return -ENODEV; ++ ++ id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK); ++ if (id != data->id) { ++ dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id); ++ return -ENODEV; ++ } ++ ++ priv->switch_id = id; ++ ++ /* Save revision to communicate to the internal PHY driver */ ++ priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK); ++ ++ return 0; ++} ++ + static int + qca8k_sw_probe(struct mdio_device *mdiodev) + { +- const struct qca8k_match_data *data; + struct qca8k_priv *priv; +- u32 id; ++ int ret; + + /* allocate the private data struct so that we can probe the switches + * ID register +@@ -1619,24 +1647,11 @@ qca8k_sw_probe(struct mdio_device *mdiod + gpiod_set_value_cansleep(priv->reset_gpio, 0); + } + +- /* get the switches ID from the compatible */ +- data = of_device_get_match_data(&mdiodev->dev); +- if (!data) +- return -ENODEV; ++ /* Check the detected switch id */ ++ ret = qca8k_read_switch_id(priv); ++ if (ret) ++ return ret; + +- /* read the switches ID register */ +- id = qca8k_read(priv, QCA8K_REG_MASK_CTRL); +- if (id < 0) +- return id; +- +- id >>= QCA8K_MASK_CTRL_ID_S; +- id &= QCA8K_MASK_CTRL_ID_M; +- if (id != data->id) { +- dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id); +- return -ENODEV; +- } +- +- priv->switch_id = id; + priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -30,8 +30,10 @@ + + /* Global control registers */ + #define QCA8K_REG_MASK_CTRL 0x000 +-#define QCA8K_MASK_CTRL_ID_M 0xff +-#define QCA8K_MASK_CTRL_ID_S 8 ++#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0) ++#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0) ++#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) ++#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c +@@ -251,6 +253,7 @@ struct qca8k_match_data { + + struct qca8k_priv { + u8 switch_id; ++ u8 switch_revision; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.15/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch b/target/linux/generic/backport-5.15/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch new file mode 100644 index 0000000000..629cb324e0 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-15-net-dsa-qca8k-add-ethernet-ports-fallback-to-setup_m.patch @@ -0,0 +1,28 @@ +From 1ee0591a1093c2448642c33433483e9260275f7b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:05 +0200 +Subject: [PATCH] net: dsa: qca8k: add ethernet-ports fallback to + setup_mdio_bus + +Dsa now also supports ethernet-ports. Add this new binding as a fallback +if the ports node can't be found. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -719,6 +719,9 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + + ports = of_get_child_by_name(priv->dev->of_node, "ports"); + if (!ports) ++ ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports"); ++ ++ if (!ports) + return -EINVAL; + + for_each_available_child_of_node(ports, port) { diff --git a/target/linux/generic/backport-5.15/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch b/target/linux/generic/backport-5.15/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch new file mode 100644 index 0000000000..6dc2dc6e3e --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-16-net-dsa-qca8k-make-rgmii-delay-configurable.patch @@ -0,0 +1,188 @@ +From e4b9977cee1583da38a6e9118078bb728aaccf7b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:06 +0200 +Subject: [PATCH] net: dsa: qca8k: make rgmii delay configurable + +The legacy qsdk code used a different delay instead of the max value. +Qsdk use 1 ns for rx and 2 ns for tx. Make these values configurable +using the standard rx/tx-internal-delay-ps ethernet binding and apply +qsdk values by default. The connected gmac doesn't add any delay so no +additional delay is added to tx/rx. +On this switch the delay is actually in ns so value should be in the +1000 order. Any value converted from ps to ns by dividing it by 1000 +as the switch max value for delay is 3ns. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 82 ++++++++++++++++++++++++++++++++++++++++- + drivers/net/dsa/qca8k.h | 11 +++--- + 2 files changed, 86 insertions(+), 7 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -778,6 +778,68 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + } + + static int ++qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv) ++{ ++ struct device_node *port_dn; ++ phy_interface_t mode; ++ struct dsa_port *dp; ++ u32 val; ++ ++ /* CPU port is already checked */ ++ dp = dsa_to_port(priv->ds, 0); ++ ++ port_dn = dp->dn; ++ ++ /* Check if port 0 is set to the correct type */ ++ of_get_phy_mode(port_dn, &mode); ++ if (mode != PHY_INTERFACE_MODE_RGMII_ID && ++ mode != PHY_INTERFACE_MODE_RGMII_RXID && ++ mode != PHY_INTERFACE_MODE_RGMII_TXID) { ++ return 0; ++ } ++ ++ switch (mode) { ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val)) ++ val = 2; ++ else ++ /* Switch regs accept value in ns, convert ps to ns */ ++ val = val / 1000; ++ ++ if (val > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); ++ val = 3; ++ } ++ ++ priv->rgmii_rx_delay = val; ++ /* Stop here if we need to check only for rx delay */ ++ if (mode != PHY_INTERFACE_MODE_RGMII_ID) ++ break; ++ ++ fallthrough; ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val)) ++ val = 1; ++ else ++ /* Switch regs accept value in ns, convert ps to ns */ ++ val = val / 1000; ++ ++ if (val > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); ++ val = 3; ++ } ++ ++ priv->rgmii_tx_delay = val; ++ break; ++ default: ++ return 0; ++ } ++ ++ return 0; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -802,6 +864,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_of_rgmii_delay(priv); ++ if (ret) ++ return ret; ++ + /* Enable CPU Port */ + ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); +@@ -970,6 +1036,8 @@ qca8k_phylink_mac_config(struct dsa_swit + case 0: /* 1st CPU port */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_TXID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII) + return; + +@@ -985,6 +1053,8 @@ qca8k_phylink_mac_config(struct dsa_swit + case 6: /* 2nd CPU port / external PHY */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_TXID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII && + state->interface != PHY_INTERFACE_MODE_1000BASEX) + return; +@@ -1008,14 +1078,18 @@ qca8k_phylink_mac_config(struct dsa_swit + qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); + break; + case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: + /* RGMII_ID needs internal delay. This is enabled through + * PORT5_PAD_CTRL for all ports, rather than individual port + * registers + */ + qca8k_write(priv, reg, + QCA8K_PORT_PAD_RGMII_EN | +- QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY)); ++ QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); + /* QCA8337 requires to set rgmii rx delay */ + if (priv->switch_id == QCA8K_ID_QCA8337) + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, +@@ -1073,6 +1147,8 @@ qca8k_phylink_validate(struct dsa_switch + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_TXID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII) + goto unsupported; + break; +@@ -1090,6 +1166,8 @@ qca8k_phylink_validate(struct dsa_switch + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_RGMII_ID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_TXID && ++ state->interface != PHY_INTERFACE_MODE_RGMII_RXID && + state->interface != PHY_INTERFACE_MODE_SGMII && + state->interface != PHY_INTERFACE_MODE_1000BASEX) + goto unsupported; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -38,12 +38,11 @@ + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) +-#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) \ +- ((0x8 + (x & 0x3)) << 22) +-#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) \ +- ((0x10 + (x & 0x3)) << 20) +-#define QCA8K_MAX_DELAY 3 ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22) ++#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20) ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) ++#define QCA8K_MAX_DELAY 3 + #define QCA8K_PORT_PAD_SGMII_EN BIT(7) + #define QCA8K_REG_PWS 0x010 + #define QCA8K_PWS_SERDES_AEN_DIS BIT(7) +@@ -254,6 +253,8 @@ struct qca8k_match_data { + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; ++ u8 rgmii_tx_delay; ++ u8 rgmii_rx_delay; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.15/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch b/target/linux/generic/backport-5.15/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch new file mode 100644 index 0000000000..4593da032b --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-17-net-dsa-qca8k-clear-MASTER_EN-after-phy-read-write.patch @@ -0,0 +1,50 @@ +From 63c33bbfeb6842a956a0eb12901e28eb335bdb18 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:07 +0200 +Subject: [PATCH] net: dsa: qca8k: clear MASTER_EN after phy read/write + +Clear MDIO_MASTER_EN bit from MDIO_MASTER_CTRL after read/write +operation. The MDIO_MASTER_EN bit is not reset after read/write +operation and the next operation can be wrongly interpreted by the +switch as a mdio operation. This cause a production of wrong/garbage +data from the switch and underfined bheavior. (random port drop, +unplugged port flagged with link up, wrong port speed) +Also on driver remove the MASTER_CTRL can be left set and cause the +malfunction of any next driver using the mdio device. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -649,8 +649,14 @@ qca8k_mdio_write(struct qca8k_priv *priv + if (ret) + return ret; + +- return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_BUSY); ++ ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_BUSY); ++ ++ /* even if the busy_wait timeouts try to clear the MASTER_EN */ ++ qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_EN); ++ ++ return ret; + } + + static int +@@ -685,6 +691,10 @@ qca8k_mdio_read(struct qca8k_priv *priv, + + val &= QCA8K_MDIO_MASTER_DATA_MASK; + ++ /* even if the busy_wait timeouts try to clear the MASTER_EN */ ++ qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_EN); ++ + return val; + } + diff --git a/target/linux/generic/backport-5.15/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch b/target/linux/generic/backport-5.15/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch new file mode 100644 index 0000000000..b6684d7210 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-18-net-dsa-qca8k-dsa-qca8k-protect-MASTER-busy_wait-wit.patch @@ -0,0 +1,128 @@ +From 60df02b6ea4581d72eb7a3ab7204504a54059b72 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:08 +0200 +Subject: [PATCH] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with + mdio mutex + +MDIO_MASTER operation have a dedicated busy wait that is not protected +by the mdio mutex. This can cause situation where the MASTER operation +is done and a normal operation is executed between the MASTER read/write +and the MASTER busy_wait. Rework the qca8k_mdio_read/write function to +address this issue by binding the lock for the whole MASTER operation +and not only the mdio read/write common operation. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 68 +++++++++++++++++++++++++++++++++-------- + 1 file changed, 55 insertions(+), 13 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -628,8 +628,31 @@ qca8k_port_to_phy(int port) + } + + static int ++qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) ++{ ++ u16 r1, r2, page; ++ u32 val; ++ int ret; ++ ++ qca8k_split_addr(reg, &r1, &r2, &page); ++ ++ ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0, ++ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, ++ priv->bus, 0x10 | r2, r1); ++ ++ /* Check if qca8k_read has failed for a different reason ++ * before returnting -ETIMEDOUT ++ */ ++ if (ret < 0 && val < 0) ++ return val; ++ ++ return ret; ++} ++ ++static int + qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data) + { ++ u16 r1, r2, page; + u32 phy, val; + int ret; + +@@ -645,12 +668,21 @@ qca8k_mdio_write(struct qca8k_priv *priv + QCA8K_MDIO_MASTER_REG_ADDR(regnum) | + QCA8K_MDIO_MASTER_DATA(data); + +- ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); ++ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); ++ ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ ++ ret = qca8k_set_page(priv->bus, page); + if (ret) +- return ret; ++ goto exit; ++ ++ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); + +- ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_BUSY); ++ ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_BUSY); ++ ++exit: ++ mutex_unlock(&priv->bus->mdio_lock); + + /* even if the busy_wait timeouts try to clear the MASTER_EN */ + qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, +@@ -662,6 +694,7 @@ qca8k_mdio_write(struct qca8k_priv *priv + static int + qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum) + { ++ u16 r1, r2, page; + u32 phy, val; + int ret; + +@@ -676,21 +709,30 @@ qca8k_mdio_read(struct qca8k_priv *priv, + QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); + +- ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val); +- if (ret) +- return ret; ++ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); ++ ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_BUSY); ++ ret = qca8k_set_page(priv->bus, page); + if (ret) +- return ret; ++ goto exit; + +- val = qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL); +- if (val < 0) +- return val; ++ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); ++ ++ ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_BUSY); ++ if (ret) ++ goto exit; + ++ val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1); + val &= QCA8K_MDIO_MASTER_DATA_MASK; + ++exit: ++ mutex_unlock(&priv->bus->mdio_lock); ++ ++ if (val >= 0) ++ val &= QCA8K_MDIO_MASTER_DATA_MASK; ++ + /* even if the busy_wait timeouts try to clear the MASTER_EN */ + qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_EN); diff --git a/target/linux/generic/backport-5.15/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch b/target/linux/generic/backport-5.15/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch new file mode 100644 index 0000000000..30eeed361e --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-19-net-dsa-qca8k-enlarge-mdio-delay-and-timeout.patch @@ -0,0 +1,39 @@ +From 617960d72e93de0f3fa52407e2d39e8c43e73b0a Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:09 +0200 +Subject: [PATCH] net: dsa: qca8k: enlarge mdio delay and timeout + +The witch require some extra delay after setting page or the next +read/write can use still use the old page. Add a delay after the +set_page function to address this as it's done in QSDK legacy driver. +Some timeouts were notice with VLAN and phy function, enlarge the +mdio busy wait timeout to fix these problems. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 1 + + drivers/net/dsa/qca8k.h | 2 +- + 2 files changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -143,6 +143,7 @@ qca8k_set_page(struct mii_bus *bus, u16 + } + + qca8k_current_page = page; ++ usleep_range(1000, 2000); + return 0; + } + +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -20,7 +20,7 @@ + #define PHY_ID_QCA8337 0x004dd036 + #define QCA8K_ID_QCA8337 0x13 + +-#define QCA8K_BUSY_WAIT_TIMEOUT 20 ++#define QCA8K_BUSY_WAIT_TIMEOUT 2000 + + #define QCA8K_NUM_FDB_RECORDS 2048 + diff --git a/target/linux/generic/backport-5.15/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch b/target/linux/generic/backport-5.15/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch new file mode 100644 index 0000000000..88d3c1ef43 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-20-net-dsa-qca8k-add-support-for-internal-phy-and-inter.patch @@ -0,0 +1,267 @@ +From 759bafb8a3226326ca357613bc90acf738f80c32 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:10 +0200 +Subject: [PATCH] net: dsa: qca8k: add support for internal phy and internal + mdio + +Add support to setup_mdio_bus for internal phy declaration. Introduce a +flag to use the legacy port phy mapping by default and use the direct +mapping if a mdio node is detected in the switch node. Register a +dedicated mdio internal mdio bus to address the different mapping +between port and phy if the mdio node is detected. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 112 +++++++++++++++++++++++++++++----------- + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 83 insertions(+), 30 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -629,7 +630,7 @@ qca8k_port_to_phy(int port) + } + + static int +-qca8k_mdio_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) ++qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) + { + u16 r1, r2, page; + u32 val; +@@ -639,7 +640,7 @@ qca8k_mdio_busy_wait(struct qca8k_priv * + + ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0, + QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, +- priv->bus, 0x10 | r2, r1); ++ bus, 0x10 | r2, r1); + + /* Check if qca8k_read has failed for a different reason + * before returnting -ETIMEDOUT +@@ -651,19 +652,16 @@ qca8k_mdio_busy_wait(struct qca8k_priv * + } + + static int +-qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data) ++qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data) + { ++ struct qca8k_priv *priv = salve_bus->priv; + u16 r1, r2, page; +- u32 phy, val; ++ u32 val; + int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + +- /* callee is responsible for not passing bad ports, +- * but we still would like to make spills impossible. +- */ +- phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum) | +@@ -679,33 +677,29 @@ qca8k_mdio_write(struct qca8k_priv *priv + + qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); + +- ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + + exit: +- mutex_unlock(&priv->bus->mdio_lock); +- + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_EN); ++ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0); ++ ++ mutex_unlock(&priv->bus->mdio_lock); + + return ret; + } + + static int +-qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum) ++qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum) + { ++ struct qca8k_priv *priv = salve_bus->priv; + u16 r1, r2, page; +- u32 phy, val; ++ u32 val; + int ret; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + +- /* callee is responsible for not passing bad ports, +- * but we still would like to make spills impossible. +- */ +- phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); +@@ -720,24 +714,22 @@ qca8k_mdio_read(struct qca8k_priv *priv, + + qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); + +- ret = qca8k_mdio_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL, ++ ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + if (ret) + goto exit; + + val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1); +- val &= QCA8K_MDIO_MASTER_DATA_MASK; + + exit: ++ /* even if the busy_wait timeouts try to clear the MASTER_EN */ ++ qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0); ++ + mutex_unlock(&priv->bus->mdio_lock); + + if (val >= 0) + val &= QCA8K_MDIO_MASTER_DATA_MASK; + +- /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_EN); +- + return val; + } + +@@ -746,7 +738,14 @@ qca8k_phy_write(struct dsa_switch *ds, i + { + struct qca8k_priv *priv = ds->priv; + +- return qca8k_mdio_write(priv, port, regnum, data); ++ /* Check if the legacy mapping should be used and the ++ * port is not correctly mapped to the right PHY in the ++ * devicetree ++ */ ++ if (priv->legacy_phy_port_mapping) ++ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; ++ ++ return qca8k_mdio_write(priv->bus, port, regnum, data); + } + + static int +@@ -755,7 +754,14 @@ qca8k_phy_read(struct dsa_switch *ds, in + struct qca8k_priv *priv = ds->priv; + int ret; + +- ret = qca8k_mdio_read(priv, port, regnum); ++ /* Check if the legacy mapping should be used and the ++ * port is not correctly mapped to the right PHY in the ++ * devicetree ++ */ ++ if (priv->legacy_phy_port_mapping) ++ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; ++ ++ ret = qca8k_mdio_read(priv->bus, port, regnum); + + if (ret < 0) + return 0xffff; +@@ -764,10 +770,37 @@ qca8k_phy_read(struct dsa_switch *ds, in + } + + static int ++qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio) ++{ ++ struct dsa_switch *ds = priv->ds; ++ struct mii_bus *bus; ++ ++ bus = devm_mdiobus_alloc(ds->dev); ++ ++ if (!bus) ++ return -ENOMEM; ++ ++ bus->priv = (void *)priv; ++ bus->name = "qca8k slave mii"; ++ bus->read = qca8k_mdio_read; ++ bus->write = qca8k_mdio_write; ++ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d", ++ ds->index); ++ ++ bus->parent = ds->dev; ++ bus->phy_mask = ~ds->phys_mii_mask; ++ ++ ds->slave_mii_bus = bus; ++ ++ return devm_of_mdiobus_register(priv->dev, bus, mdio); ++} ++ ++static int + qca8k_setup_mdio_bus(struct qca8k_priv *priv) + { + u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; +- struct device_node *ports, *port; ++ struct device_node *ports, *port, *mdio; ++ phy_interface_t mode; + int err; + + ports = of_get_child_by_name(priv->dev->of_node, "ports"); +@@ -788,7 +821,10 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + if (!dsa_is_user_port(priv->ds, reg)) + continue; + +- if (of_property_read_bool(port, "phy-handle")) ++ of_get_phy_mode(port, &mode); ++ ++ if (of_property_read_bool(port, "phy-handle") && ++ mode != PHY_INTERFACE_MODE_INTERNAL) + external_mdio_mask |= BIT(reg); + else + internal_mdio_mask |= BIT(reg); +@@ -825,8 +861,23 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + QCA8K_MDIO_MASTER_EN); + } + ++ /* Check if the devicetree declare the port:phy mapping */ ++ mdio = of_get_child_by_name(priv->dev->of_node, "mdio"); ++ if (of_device_is_available(mdio)) { ++ err = qca8k_mdio_register(priv, mdio); ++ if (err) ++ of_node_put(mdio); ++ ++ return err; ++ } ++ ++ /* If a mapping can't be found the legacy mapping is used, ++ * using the qca8k_port_to_phy function ++ */ ++ priv->legacy_phy_port_mapping = true; + priv->ops.phy_read = qca8k_phy_read; + priv->ops.phy_write = qca8k_phy_write; ++ + return 0; + } + +@@ -1212,7 +1263,8 @@ qca8k_phylink_validate(struct dsa_switch + case 5: + /* Internal PHY */ + if (state->interface != PHY_INTERFACE_MODE_NA && +- state->interface != PHY_INTERFACE_MODE_GMII) ++ state->interface != PHY_INTERFACE_MODE_GMII && ++ state->interface != PHY_INTERFACE_MODE_INTERNAL) + goto unsupported; + break; + case 6: /* 2nd CPU port / external PHY */ +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -255,6 +255,7 @@ struct qca8k_priv { + u8 switch_revision; + u8 rgmii_tx_delay; + u8 rgmii_rx_delay; ++ bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.15/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch b/target/linux/generic/backport-5.15/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch new file mode 100644 index 0000000000..6db01b4b41 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch @@ -0,0 +1,93 @@ +From 0c994a28e7518f098c84a3049cb2915780db873a Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:11 +0200 +Subject: [PATCH] devicetree: bindings: dsa: qca8k: Document internal mdio + definition + +Document new way of declare mapping of internal PHY to port. +The new implementation directly declare the PHY connected to the port +by adding a node in the switch node. The driver detect this and register +an internal mdiobus using the mapping defined in the mdio node. + +Signed-off-by: Ansuel Smith +Reviewed-by: Rob Herring +Signed-off-by: David S. Miller +--- + .../devicetree/bindings/net/dsa/qca8k.txt | 39 +++++++++++++++++++ + 1 file changed, 39 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -21,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K s + mdio-bus each subnode describing a port needs to have a valid phandle + referencing the internal PHY it is connected to. This is because there's no + N:N mapping of port and PHY id. ++To declare the internal mdio-bus configuration, declare a mdio node in the ++switch node and declare the phandle for the port referencing the internal ++PHY is connected to. In this config a internal mdio-bus is registered and ++the mdio MASTER is used as communication. + + Don't use mixed external and internal mdio-bus configurations, as this is + not supported by the hardware. +@@ -150,26 +154,61 @@ for the internal master mdio-bus configu + port@1 { + reg = <1>; + label = "lan1"; ++ phy-mode = "internal"; ++ phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; ++ phy-mode = "internal"; ++ phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; ++ phy-mode = "internal"; ++ phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; ++ phy-mode = "internal"; ++ phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; ++ phy-mode = "internal"; ++ phy-handle = <&phy_port5>; ++ }; ++ }; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ phy_port1: phy@0 { ++ reg = <0>; ++ }; ++ ++ phy_port2: phy@1 { ++ reg = <1>; ++ }; ++ ++ phy_port3: phy@2 { ++ reg = <2>; ++ }; ++ ++ phy_port4: phy@3 { ++ reg = <3>; ++ }; ++ ++ phy_port5: phy@4 { ++ reg = <4>; + }; + }; + }; diff --git a/target/linux/generic/backport-5.15/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch b/target/linux/generic/backport-5.15/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch new file mode 100644 index 0000000000..da8d5b3462 --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-22-net-dsa-qca8k-improve-internal-mdio-read-write-bus-a.patch @@ -0,0 +1,95 @@ +From b7ebac354d54f1657bb89b7a7ca149db50203e6a Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:12 +0200 +Subject: [PATCH] net: dsa: qca8k: improve internal mdio read/write bus access + +Improve the internal mdio read/write bus access by caching the value +without accessing it for every read/write. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 28 +++++++++++++++------------- + 1 file changed, 15 insertions(+), 13 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -655,6 +655,7 @@ static int + qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data) + { + struct qca8k_priv *priv = salve_bus->priv; ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -669,22 +670,22 @@ qca8k_mdio_write(struct mii_bus *salve_b + + qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(priv->bus, page); ++ ret = qca8k_set_page(bus, page); + if (ret) + goto exit; + +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, val); + +- ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL, ++ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + + exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + +- mutex_unlock(&priv->bus->mdio_lock); ++ mutex_unlock(&bus->mdio_lock); + + return ret; + } +@@ -693,6 +694,7 @@ static int + qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum) + { + struct qca8k_priv *priv = salve_bus->priv; ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -706,26 +708,26 @@ qca8k_mdio_read(struct mii_bus *salve_bu + + qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(priv->bus, page); ++ ret = qca8k_set_page(bus, page); + if (ret) + goto exit; + +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, val); + +- ret = qca8k_mdio_busy_wait(priv->bus, QCA8K_MDIO_MASTER_CTRL, ++ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + if (ret) + goto exit; + +- val = qca8k_mii_read32(priv->bus, 0x10 | r2, r1); ++ val = qca8k_mii_read32(bus, 0x10 | r2, r1); + + exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_mii_write32(priv->bus, 0x10 | r2, r1, 0); ++ qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + +- mutex_unlock(&priv->bus->mdio_lock); ++ mutex_unlock(&bus->mdio_lock); + + if (val >= 0) + val &= QCA8K_MDIO_MASTER_DATA_MASK; diff --git a/target/linux/generic/backport-5.15/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch b/target/linux/generic/backport-5.15/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch new file mode 100644 index 0000000000..1179cf152d --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-23-net-dsa-qca8k-pass-switch_revision-info-to-phy-dev_f.patch @@ -0,0 +1,48 @@ +From a46aec02bc06ac2c33f326339e4ef88c735dc30d Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:13 +0200 +Subject: [PATCH] net: dsa: qca8k: pass switch_revision info to phy dev_flags + +Define get_phy_flags to pass switch_Revision needed to tweak the +internal PHY with debug values based on the revision. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1740,6 +1740,22 @@ qca8k_port_vlan_del(struct dsa_switch *d + return ret; + } + ++static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ ++ /* Communicate to the phy internal driver the switch revision. ++ * Based on the switch revision different values needs to be ++ * set to the dbg and mmd reg on the phy. ++ * The first 2 bit are used to communicate the switch revision ++ * to the phy driver. ++ */ ++ if (port > 0 && port < 6) ++ return priv->switch_revision; ++ ++ return 0; ++} ++ + static enum dsa_tag_protocol + qca8k_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol mp) +@@ -1774,6 +1790,7 @@ static const struct dsa_switch_ops qca8k + .phylink_mac_config = qca8k_phylink_mac_config, + .phylink_mac_link_down = qca8k_phylink_mac_link_down, + .phylink_mac_link_up = qca8k_phylink_mac_link_up, ++ .get_phy_flags = qca8k_get_phy_flags, + }; + + static int qca8k_read_switch_id(struct qca8k_priv *priv) diff --git a/target/linux/generic/backport-5.15/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch b/target/linux/generic/backport-5.15/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch new file mode 100644 index 0000000000..20325f564d --- /dev/null +++ b/target/linux/generic/backport-5.15/735-v5.14-25-net-phy-add-support-for-qca8k-switch-internal-PHY-in.patch @@ -0,0 +1,229 @@ +From 272833b9b3b3969be7a91839121d86662c8c4253 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 14 May 2021 23:00:15 +0200 +Subject: [PATCH] net: phy: add support for qca8k switch internal PHY in at803x + +Since the at803x share the same regs, it's assumed they are based on the +same implementation. Make it part of the at803x PHY driver to skip +having redudant code. +Add initial support for qca8k internal PHYs. The internal PHYs requires +special mmd and debug values to be set based on the switch revision +passwd using the dev_flags. Supports output of idle, receive and eee_wake +errors stats. +Some debug values sets can't be translated as the documentation lacks any +reference about them. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 5 +- + drivers/net/phy/at803x.c | 132 ++++++++++++++++++++++++++++++++++++++- + 2 files changed, 134 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -235,10 +235,11 @@ config NXP_TJA11XX_PHY + Currently supports the NXP TJA1100 and TJA1101 PHY. + + config AT803X_PHY +- tristate "Qualcomm Atheros AR803X PHYs" ++ tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs" + depends on REGULATOR + help +- Currently supports the AR8030, AR8031, AR8033 and AR8035 model ++ Currently supports the AR8030, AR8031, AR8033, AR8035 and internal ++ QCA8337(Internal qca8k PHY) model + + config QSEMI_PHY + tristate "Quality Semiconductor PHYs" +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -92,10 +92,16 @@ + #define AT803X_DEBUG_REG_5 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + ++#define AT803X_DEBUG_REG_3C 0x3C ++ ++#define AT803X_DEBUG_REG_3D 0x3D ++ + #define AT803X_DEBUG_REG_1F 0x1F + #define AT803X_DEBUG_PLL_ON BIT(2) + #define AT803X_DEBUG_RGMII_1V8 BIT(3) + ++#define MDIO_AZ_DEBUG 0x800D ++ + /* AT803x supports either the XTAL input pad, an internal PLL or the + * DSP as clock reference for the clock output pad. The XTAL reference + * is only used for 25 MHz output, all other frequencies need the PLL. +@@ -142,10 +148,34 @@ + #define AT803X_PAGE_FIBER 0 + #define AT803X_PAGE_COPPER 1 + ++#define QCA8327_PHY_ID 0x004dd034 ++#define QCA8337_PHY_ID 0x004dd036 ++#define QCA8K_PHY_ID_MASK 0xffffffff ++ ++#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0) ++ + MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); + MODULE_AUTHOR("Matus Ujhelyi"); + MODULE_LICENSE("GPL"); + ++enum stat_access_type { ++ PHY, ++ MMD ++}; ++ ++struct at803x_hw_stat { ++ const char *string; ++ u8 reg; ++ u32 mask; ++ enum stat_access_type access_type; ++}; ++ ++static struct at803x_hw_stat at803x_hw_stats[] = { ++ { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, ++ { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, ++ { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, ++}; ++ + struct at803x_priv { + int flags; + #define AT803X_KEEP_PLL_ENABLED BIT(0) /* don't turn off internal PLL */ +@@ -154,6 +184,7 @@ struct at803x_priv { + struct regulator_dev *vddio_rdev; + struct regulator_dev *vddh_rdev; + struct regulator *vddio; ++ u64 stats[ARRAY_SIZE(at803x_hw_stats)]; + }; + + struct at803x_context { +@@ -165,6 +196,17 @@ struct at803x_context { + u16 led_control; + }; + ++static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data) ++{ ++ int ret; ++ ++ ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); ++ if (ret < 0) ++ return ret; ++ ++ return phy_write(phydev, AT803X_DEBUG_DATA, data); ++} ++ + static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg) + { + int ret; +@@ -327,6 +369,53 @@ static void at803x_get_wol(struct phy_de + wol->wolopts |= WAKE_MAGIC; + } + ++static int at803x_get_sset_count(struct phy_device *phydev) ++{ ++ return ARRAY_SIZE(at803x_hw_stats); ++} ++ ++static void at803x_get_strings(struct phy_device *phydev, u8 *data) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) { ++ strscpy(data + i * ETH_GSTRING_LEN, ++ at803x_hw_stats[i].string, ETH_GSTRING_LEN); ++ } ++} ++ ++static u64 at803x_get_stat(struct phy_device *phydev, int i) ++{ ++ struct at803x_hw_stat stat = at803x_hw_stats[i]; ++ struct at803x_priv *priv = phydev->priv; ++ int val; ++ u64 ret; ++ ++ if (stat.access_type == MMD) ++ val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg); ++ else ++ val = phy_read(phydev, stat.reg); ++ ++ if (val < 0) { ++ ret = U64_MAX; ++ } else { ++ val = val & stat.mask; ++ priv->stats[i] += val; ++ ret = priv->stats[i]; ++ } ++ ++ return ret; ++} ++ ++static void at803x_get_stats(struct phy_device *phydev, ++ struct ethtool_stats *stats, u64 *data) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) ++ data[i] = at803x_get_stat(phydev, i); ++} ++ + static int at803x_suspend(struct phy_device *phydev) + { + int value; +@@ -1102,6 +1191,34 @@ static int at803x_cable_test_start(struc + return 0; + } + ++static int qca83xx_config_init(struct phy_device *phydev) ++{ ++ u8 switch_revision; ++ ++ switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK; ++ ++ switch (switch_revision) { ++ case 1: ++ /* For 100M waveform */ ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea); ++ /* Turn on Gigabit clock */ ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0); ++ break; ++ ++ case 2: ++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0); ++ fallthrough; ++ case 4: ++ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); ++ break; ++ } ++ ++ return 0; ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* Qualcomm Atheros AR8035 */ +@@ -1198,7 +1315,20 @@ static struct phy_driver at803x_driver[] + .read_status = at803x_read_status, + .soft_reset = genphy_soft_reset, + .config_aneg = at803x_config_aneg, +-} }; ++}, { ++ /* QCA8337 */ ++ .phy_id = QCA8337_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "QCA PHY 8337", ++ /* PHY_GBIT_FEATURES */ ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, ++}, }; + + module_phy_driver(at803x_driver); + diff --git a/target/linux/generic/backport-5.15/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch b/target/linux/generic/backport-5.15/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch new file mode 100644 index 0000000000..a68e3b1821 --- /dev/null +++ b/target/linux/generic/backport-5.15/736-v5.14-net-dsa-qca8k-fix-missing-unlock-on-error-in-qca8k-vlan.patch @@ -0,0 +1,64 @@ +From 0d56e5c191b197e1d30a0a4c92628836dafced0f Mon Sep 17 00:00:00 2001 +From: Wei Yongjun +Date: Tue, 18 May 2021 11:24:13 +0000 +Subject: [PATCH] net: dsa: qca8k: fix missing unlock on error in + qca8k_vlan_(add|del) + +Add the missing unlock before return from function qca8k_vlan_add() +and qca8k_vlan_del() in the error handling case. + +Fixes: 028f5f8ef44f ("net: dsa: qca8k: handle error with qca8k_read operation") +Reported-by: Hulk Robot +Signed-off-by: Wei Yongjun +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -506,8 +506,10 @@ qca8k_vlan_add(struct qca8k_priv *priv, + goto out; + + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); +- if (reg < 0) +- return reg; ++ if (reg < 0) { ++ ret = reg; ++ goto out; ++ } + reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN; + reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + if (untagged) +@@ -519,7 +521,7 @@ qca8k_vlan_add(struct qca8k_priv *priv, + + ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); + if (ret) +- return ret; ++ goto out; + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); + + out: +@@ -541,8 +543,10 @@ qca8k_vlan_del(struct qca8k_priv *priv, + goto out; + + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); +- if (reg < 0) +- return reg; ++ if (reg < 0) { ++ ret = reg; ++ goto out; ++ } + reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT << + QCA8K_VTU_FUNC0_EG_MODE_S(port); +@@ -564,7 +568,7 @@ qca8k_vlan_del(struct qca8k_priv *priv, + } else { + ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); + if (ret) +- return ret; ++ goto out; + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); + } + diff --git a/target/linux/generic/backport-5.15/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch b/target/linux/generic/backport-5.15/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch new file mode 100644 index 0000000000..451b0e9446 --- /dev/null +++ b/target/linux/generic/backport-5.15/737-v5.14-01-net-dsa-qca8k-check-return-value-of-read-functions-c.patch @@ -0,0 +1,348 @@ +From 7c9896e37807862e276064dd9331860f5d27affc Mon Sep 17 00:00:00 2001 +From: Yang Yingliang +Date: Sat, 29 May 2021 11:04:38 +0800 +Subject: [PATCH] net: dsa: qca8k: check return value of read functions + correctly + +Current return type of qca8k_mii_read32() and qca8k_read() are +unsigned, it can't be negative, so the return value check is +unuseful. For check the return value correctly, change return +type of the read functions and add a output parameter to store +the read value. + +Signed-off-by: Yang Yingliang +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/qca8k.c | 130 +++++++++++++++++++--------------------- + 1 file changed, 60 insertions(+), 70 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -89,26 +89,26 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u + *page = regaddr & 0x3ff; + } + +-static u32 +-qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum) ++static int ++qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) + { +- u32 val; + int ret; + + ret = bus->read(bus, phy_id, regnum); + if (ret >= 0) { +- val = ret; ++ *val = ret; + ret = bus->read(bus, phy_id, regnum + 1); +- val |= ret << 16; ++ *val |= ret << 16; + } + + if (ret < 0) { + dev_err_ratelimited(&bus->dev, + "failed to read qca8k 32bit register\n"); ++ *val = 0; + return ret; + } + +- return val; ++ return 0; + } + + static void +@@ -148,26 +148,26 @@ qca8k_set_page(struct mii_bus *bus, u16 + return 0; + } + +-static u32 +-qca8k_read(struct qca8k_priv *priv, u32 reg) ++static int ++qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val) + { + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; +- u32 val; ++ int ret; + + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- val = qca8k_set_page(bus, page); +- if (val < 0) ++ ret = qca8k_set_page(bus, page); ++ if (ret < 0) + goto exit; + +- val = qca8k_mii_read32(bus, 0x10 | r2, r1); ++ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val); + + exit: + mutex_unlock(&bus->mdio_lock); +- return val; ++ return ret; + } + + static int +@@ -208,11 +208,9 @@ qca8k_rmw(struct qca8k_priv *priv, u32 r + if (ret < 0) + goto exit; + +- val = qca8k_mii_read32(bus, 0x10 | r2, r1); +- if (val < 0) { +- ret = val; ++ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); ++ if (ret < 0) + goto exit; +- } + + val &= ~mask; + val |= write_val; +@@ -240,15 +238,8 @@ static int + qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ctx; +- int ret; +- +- ret = qca8k_read(priv, reg); +- if (ret < 0) +- return ret; +- +- *val = ret; + +- return 0; ++ return qca8k_read(priv, reg, val); + } + + static int +@@ -296,18 +287,18 @@ static struct regmap_config qca8k_regmap + static int + qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) + { ++ int ret, ret1; + u32 val; +- int ret; + +- ret = read_poll_timeout(qca8k_read, val, !(val & mask), ++ ret = read_poll_timeout(qca8k_read, ret1, !(val & mask), + 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, +- priv, reg); ++ priv, reg, &val); + + /* Check if qca8k_read has failed for a different reason + * before returning -ETIMEDOUT + */ +- if (ret < 0 && val < 0) +- return val; ++ if (ret < 0 && ret1 < 0) ++ return ret1; + + return ret; + } +@@ -316,13 +307,13 @@ static int + qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb) + { + u32 reg[4], val; +- int i; ++ int i, ret; + + /* load the ARL table into an array */ + for (i = 0; i < 4; i++) { +- val = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4)); +- if (val < 0) +- return val; ++ ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val); ++ if (ret < 0) ++ return ret; + + reg[i] = val; + } +@@ -396,9 +387,9 @@ qca8k_fdb_access(struct qca8k_priv *priv + + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_FDB_LOAD) { +- reg = qca8k_read(priv, QCA8K_REG_ATU_FUNC); +- if (reg < 0) +- return reg; ++ ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, ®); ++ if (ret < 0) ++ return ret; + if (reg & QCA8K_ATU_FUNC_FULL) + return -1; + } +@@ -477,9 +468,9 @@ qca8k_vlan_access(struct qca8k_priv *pri + + /* Check for table full violation when adding an entry */ + if (cmd == QCA8K_VLAN_LOAD) { +- reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1); +- if (reg < 0) +- return reg; ++ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, ®); ++ if (ret < 0) ++ return ret; + if (reg & QCA8K_VTU_FUNC1_FULL) + return -ENOMEM; + } +@@ -505,11 +496,9 @@ qca8k_vlan_add(struct qca8k_priv *priv, + if (ret < 0) + goto out; + +- reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); +- if (reg < 0) { +- ret = reg; ++ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®); ++ if (ret < 0) + goto out; +- } + reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN; + reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + if (untagged) +@@ -542,11 +531,9 @@ qca8k_vlan_del(struct qca8k_priv *priv, + if (ret < 0) + goto out; + +- reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0); +- if (reg < 0) { +- ret = reg; ++ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®); ++ if (ret < 0) + goto out; +- } + reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port)); + reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT << + QCA8K_VTU_FUNC0_EG_MODE_S(port); +@@ -638,19 +625,19 @@ qca8k_mdio_busy_wait(struct mii_bus *bus + { + u16 r1, r2, page; + u32 val; +- int ret; ++ int ret, ret1; + + qca8k_split_addr(reg, &r1, &r2, &page); + +- ret = read_poll_timeout(qca8k_mii_read32, val, !(val & mask), 0, ++ ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0, + QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, +- bus, 0x10 | r2, r1); ++ bus, 0x10 | r2, r1, &val); + + /* Check if qca8k_read has failed for a different reason + * before returnting -ETIMEDOUT + */ +- if (ret < 0 && val < 0) +- return val; ++ if (ret < 0 && ret1 < 0) ++ return ret1; + + return ret; + } +@@ -725,7 +712,7 @@ qca8k_mdio_read(struct mii_bus *salve_bu + if (ret) + goto exit; + +- val = qca8k_mii_read32(bus, 0x10 | r2, r1); ++ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); + + exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +@@ -733,10 +720,10 @@ exit: + + mutex_unlock(&bus->mdio_lock); + +- if (val >= 0) +- val &= QCA8K_MDIO_MASTER_DATA_MASK; ++ if (ret >= 0) ++ ret = val & QCA8K_MDIO_MASTER_DATA_MASK; + +- return val; ++ return ret; + } + + static int +@@ -1211,7 +1198,7 @@ qca8k_phylink_mac_config(struct dsa_swit + qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); + + /* Enable/disable SerDes auto-negotiation as necessary */ +- val = qca8k_read(priv, QCA8K_REG_PWS); ++ qca8k_read(priv, QCA8K_REG_PWS, &val); + if (phylink_autoneg_inband(mode)) + val &= ~QCA8K_PWS_SERDES_AEN_DIS; + else +@@ -1219,7 +1206,7 @@ qca8k_phylink_mac_config(struct dsa_swit + qca8k_write(priv, QCA8K_REG_PWS, val); + + /* Configure the SGMII parameters */ +- val = qca8k_read(priv, QCA8K_REG_SGMII_CTRL); ++ qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); + + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD; +@@ -1314,10 +1301,11 @@ qca8k_phylink_mac_link_state(struct dsa_ + { + struct qca8k_priv *priv = ds->priv; + u32 reg; ++ int ret; + +- reg = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port)); +- if (reg < 0) +- return reg; ++ ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); ++ if (ret < 0) ++ return ret; + + state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); + state->an_complete = state->link; +@@ -1419,19 +1407,20 @@ qca8k_get_ethtool_stats(struct dsa_switc + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + const struct qca8k_mib_desc *mib; + u32 reg, i, val; +- u64 hi; ++ u64 hi = 0; ++ int ret; + + for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) { + mib = &ar8327_mib[i]; + reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset; + +- val = qca8k_read(priv, reg); +- if (val < 0) ++ ret = qca8k_read(priv, reg, &val); ++ if (ret < 0) + continue; + + if (mib->size == 2) { +- hi = qca8k_read(priv, reg + 4); +- if (hi < 0) ++ ret = qca8k_read(priv, reg + 4, (u32 *)&hi); ++ if (ret < 0) + continue; + } + +@@ -1459,7 +1448,7 @@ qca8k_set_mac_eee(struct dsa_switch *ds, + int ret; + + mutex_lock(&priv->reg_mutex); +- reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL); ++ ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, ®); + if (reg < 0) { + ret = reg; + goto exit; +@@ -1802,14 +1791,15 @@ static int qca8k_read_switch_id(struct q + const struct qca8k_match_data *data; + u32 val; + u8 id; ++ int ret; + + /* get the switches ID from the compatible */ + data = of_device_get_match_data(priv->dev); + if (!data) + return -ENODEV; + +- val = qca8k_read(priv, QCA8K_REG_MASK_CTRL); +- if (val < 0) ++ ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val); ++ if (ret < 0) + return -ENODEV; + + id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK); diff --git a/target/linux/generic/backport-5.15/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch b/target/linux/generic/backport-5.15/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch new file mode 100644 index 0000000000..d20da5b85e --- /dev/null +++ b/target/linux/generic/backport-5.15/737-v5.14-02-net-dsa-qca8k-add-missing-check-return-value-in-qca8.patch @@ -0,0 +1,47 @@ +From 9fe99de01440d9ede74d447ac76e9c445d8daae9 Mon Sep 17 00:00:00 2001 +From: Yang Yingliang +Date: Sat, 29 May 2021 11:04:39 +0800 +Subject: [PATCH] net: dsa: qca8k: add missing check return value in + qca8k_phylink_mac_config() + +Now we can check qca8k_read() return value correctly, so if +it fails, we need return directly. + +Signed-off-by: Yang Yingliang +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/qca8k.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1128,6 +1128,7 @@ qca8k_phylink_mac_config(struct dsa_swit + { + struct qca8k_priv *priv = ds->priv; + u32 reg, val; ++ int ret; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1198,7 +1199,9 @@ qca8k_phylink_mac_config(struct dsa_swit + qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); + + /* Enable/disable SerDes auto-negotiation as necessary */ +- qca8k_read(priv, QCA8K_REG_PWS, &val); ++ ret = qca8k_read(priv, QCA8K_REG_PWS, &val); ++ if (ret) ++ return; + if (phylink_autoneg_inband(mode)) + val &= ~QCA8K_PWS_SERDES_AEN_DIS; + else +@@ -1206,7 +1209,9 @@ qca8k_phylink_mac_config(struct dsa_swit + qca8k_write(priv, QCA8K_REG_PWS, val); + + /* Configure the SGMII parameters */ +- qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); ++ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); ++ if (ret) ++ return; + + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD; diff --git a/target/linux/generic/backport-5.15/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch b/target/linux/generic/backport-5.15/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch new file mode 100644 index 0000000000..aed97d0549 --- /dev/null +++ b/target/linux/generic/backport-5.15/738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch @@ -0,0 +1,47 @@ +From aa3d020b22cb844ab7bdbb9e5d861a64666e2b74 Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Wed, 9 Jun 2021 12:52:12 +0300 +Subject: [PATCH] net: dsa: qca8k: fix an endian bug in + qca8k_get_ethtool_stats() + +The "hi" variable is a u64 but the qca8k_read() writes to the top 32 +bits of it. That will work on little endian systems but it's a bit +subtle. It's cleaner to make declare "hi" as a u32. We will still need +to cast it when we shift it later on in the function but that's fine. + +Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly") +Signed-off-by: Dan Carpenter +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1412,7 +1412,7 @@ qca8k_get_ethtool_stats(struct dsa_switc + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + const struct qca8k_mib_desc *mib; + u32 reg, i, val; +- u64 hi = 0; ++ u32 hi = 0; + int ret; + + for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) { +@@ -1424,14 +1424,14 @@ qca8k_get_ethtool_stats(struct dsa_switc + continue; + + if (mib->size == 2) { +- ret = qca8k_read(priv, reg + 4, (u32 *)&hi); ++ ret = qca8k_read(priv, reg + 4, &hi); + if (ret < 0) + continue; + } + + data[i] = val; + if (mib->size == 2) +- data[i] |= hi << 32; ++ data[i] |= (u64)hi << 32; + } + } + diff --git a/target/linux/generic/backport-5.15/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch b/target/linux/generic/backport-5.15/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch new file mode 100644 index 0000000000..c58f79cd8b --- /dev/null +++ b/target/linux/generic/backport-5.15/738-v5.14-02-net-dsa-qca8k-check-the-correct-variable-in-qca8k-se.patch @@ -0,0 +1,31 @@ +From 3d0167f2a627528032821cdeb78b4eab0510460f Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Wed, 9 Jun 2021 12:53:03 +0300 +Subject: [PATCH] net: dsa: qca8k: check the correct variable in + qca8k_set_mac_eee() + +This code check "reg" but "ret" was intended so the error handling will +never trigger. + +Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly") +Signed-off-by: Dan Carpenter +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1454,10 +1454,8 @@ qca8k_set_mac_eee(struct dsa_switch *ds, + + mutex_lock(&priv->reg_mutex); + ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, ®); +- if (reg < 0) { +- ret = reg; ++ if (ret < 0) + goto exit; +- } + + if (eee->eee_enabled) + reg |= lpi_en; diff --git a/target/linux/generic/backport-5.15/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch b/target/linux/generic/backport-5.15/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch new file mode 100644 index 0000000000..1e293d3a0b --- /dev/null +++ b/target/linux/generic/backport-5.15/739-v5.15-net-dsa-qca8k-fix-kernel-panic-with-legacy-mdio-mapping.patch @@ -0,0 +1,80 @@ +From ce062a0adbfe933b1932235fdfd874c4c91d1bb0 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sat, 11 Sep 2021 17:50:09 +0200 +Subject: net: dsa: qca8k: fix kernel panic with legacy mdio mapping + +When the mdio legacy mapping is used the mii_bus priv registered by DSA +refer to the dsa switch struct instead of the qca8k_priv struct and +causes a kernel panic. Create dedicated function when the internal +dedicated mdio driver is used to properly handle the 2 different +implementation. + +Fixes: 759bafb8a322 ("net: dsa: qca8k: add support for internal phy and internal mdio") +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 30 ++++++++++++++++++++++-------- + 1 file changed, 22 insertions(+), 8 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -643,10 +643,8 @@ qca8k_mdio_busy_wait(struct mii_bus *bus + } + + static int +-qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data) ++qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) + { +- struct qca8k_priv *priv = salve_bus->priv; +- struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -682,10 +680,8 @@ exit: + } + + static int +-qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum) ++qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) + { +- struct qca8k_priv *priv = salve_bus->priv; +- struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -727,6 +723,24 @@ exit: + } + + static int ++qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) ++{ ++ struct qca8k_priv *priv = slave_bus->priv; ++ struct mii_bus *bus = priv->bus; ++ ++ return qca8k_mdio_write(bus, phy, regnum, data); ++} ++ ++static int ++qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) ++{ ++ struct qca8k_priv *priv = slave_bus->priv; ++ struct mii_bus *bus = priv->bus; ++ ++ return qca8k_mdio_read(bus, phy, regnum); ++} ++ ++static int + qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) + { + struct qca8k_priv *priv = ds->priv; +@@ -775,8 +789,8 @@ qca8k_mdio_register(struct qca8k_priv *p + + bus->priv = (void *)priv; + bus->name = "qca8k slave mii"; +- bus->read = qca8k_mdio_read; +- bus->write = qca8k_mdio_write; ++ bus->read = qca8k_internal_mdio_read; ++ bus->write = qca8k_internal_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d", + ds->index); + diff --git a/target/linux/generic/backport-5.15/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch b/target/linux/generic/backport-5.15/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch new file mode 100644 index 0000000000..91cf55b18a --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0001-net-dsa-b53-Add-debug-prints-in-b53_vlan_enable.patch @@ -0,0 +1,65 @@ +From ee47ed08d75e8f16b3cf882061ee19c2ea19dd6c Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Wed, 10 Mar 2021 10:52:26 -0800 +Subject: [PATCH] net: dsa: b53: Add debug prints in b53_vlan_enable() + +Having dynamic debug prints in b53_vlan_enable() has been helpful to +uncover a recent but update the function to indicate the port being +configured (or -1 for initial setup) and include the global VLAN enabled +and VLAN filtering enable status. + +Signed-off-by: Florian Fainelli +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_common.c | 11 +++++++---- + 1 file changed, 7 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -349,7 +349,7 @@ static void b53_set_forwarding(struct b5 + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + } + +-static void b53_enable_vlan(struct b53_device *dev, bool enable, ++static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, + bool enable_filtering) + { + u8 mgmt, vc0, vc1, vc4 = 0, vc5; +@@ -431,6 +431,9 @@ static void b53_enable_vlan(struct b53_d + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + + dev->vlan_enabled = enable; ++ ++ dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n", ++ port, enable, enable_filtering); + } + + static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) +@@ -708,7 +711,7 @@ int b53_configure_vlan(struct dsa_switch + b53_do_vlan_op(dev, VTA_CMD_CLEAR); + } + +- b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering); ++ b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); + + b53_for_each_port(dev, i) + b53_write16(dev, B53_VLAN_PAGE, +@@ -1390,7 +1393,7 @@ int b53_vlan_filtering(struct dsa_switch + if (switchdev_trans_ph_prepare(trans)) + return 0; + +- b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering); ++ b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering); + + return 0; + } +@@ -1415,7 +1418,7 @@ int b53_vlan_prepare(struct dsa_switch * + if (vlan->vid_end >= dev->num_vlans) + return -ERANGE; + +- b53_enable_vlan(dev, true, ds->vlan_filtering); ++ b53_enable_vlan(dev, port, true, ds->vlan_filtering); + + return 0; + } diff --git a/target/linux/generic/backport-5.15/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch b/target/linux/generic/backport-5.15/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch new file mode 100644 index 0000000000..56579b2d36 --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0002-net-dsa-b53-spi-allow-device-tree-probing.patch @@ -0,0 +1,41 @@ +From 6d16eadab6db0c1d61e59fee7ed1ecc2d10269be Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Mon, 15 Mar 2021 15:14:23 +0100 +Subject: [PATCH] net: dsa: b53: spi: allow device tree probing +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add missing of_match_table to allow device tree probing. + +Signed-off-by: Álvaro Fernández Rojas +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_spi.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/net/dsa/b53/b53_spi.c ++++ b/drivers/net/dsa/b53/b53_spi.c +@@ -324,9 +324,22 @@ static int b53_spi_remove(struct spi_dev + return 0; + } + ++static const struct of_device_id b53_spi_of_match[] = { ++ { .compatible = "brcm,bcm5325" }, ++ { .compatible = "brcm,bcm5365" }, ++ { .compatible = "brcm,bcm5395" }, ++ { .compatible = "brcm,bcm5397" }, ++ { .compatible = "brcm,bcm5398" }, ++ { .compatible = "brcm,bcm53115" }, ++ { .compatible = "brcm,bcm53125" }, ++ { .compatible = "brcm,bcm53128" }, ++ { /* sentinel */ } ++}; ++ + static struct spi_driver b53_spi_driver = { + .driver = { + .name = "b53-switch", ++ .of_match_table = b53_spi_of_match, + }, + .probe = b53_spi_probe, + .remove = b53_spi_remove, diff --git a/target/linux/generic/backport-5.15/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch b/target/linux/generic/backport-5.15/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch new file mode 100644 index 0000000000..99eced1b6a --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0003-net-dsa-b53-relax-is63xx-condition.patch @@ -0,0 +1,31 @@ +From ad426d7d966b525b73ed5a1842dd830312bbba71 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 17 Mar 2021 09:42:01 +0100 +Subject: [PATCH] net: dsa: b53: relax is63xx() condition +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM63xx switches are present on bcm63xx and bmips devices. + +Signed-off-by: Álvaro Fernández Rojas +Acked-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_priv.h | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/drivers/net/dsa/b53/b53_priv.h ++++ b/drivers/net/dsa/b53/b53_priv.h +@@ -186,11 +186,7 @@ static inline int is531x5(struct b53_dev + + static inline int is63xx(struct b53_device *dev) + { +-#ifdef CONFIG_BCM63XX + return dev->chip_id == BCM63XX_DEVICE_ID; +-#else +- return 0; +-#endif + } + + static inline int is5301x(struct b53_device *dev) diff --git a/target/linux/generic/backport-5.15/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch b/target/linux/generic/backport-5.15/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch new file mode 100644 index 0000000000..3b7d8f37cd --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0004-net-dsa-tag_brcm-add-support-for-legacy-tags.patch @@ -0,0 +1,180 @@ +From 964dbf186eaa84d409c359ddf09c827a3fbe8228 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 17 Mar 2021 11:29:26 +0100 +Subject: [PATCH] net: dsa: tag_brcm: add support for legacy tags +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM. +These tags are used on BCM5325, BCM5365 and BCM63xx switches. + +Signed-off-by: Álvaro Fernández Rojas +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 2 + + net/dsa/Kconfig | 7 +++ + net/dsa/tag_brcm.c | 107 +++++++++++++++++++++++++++++++++++++++++++-- + 3 files changed, 113 insertions(+), 3 deletions(-) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -45,10 +45,12 @@ struct phylink_link_state; + #define DSA_TAG_PROTO_OCELOT_VALUE 15 + #define DSA_TAG_PROTO_AR9331_VALUE 16 + #define DSA_TAG_PROTO_RTL4_A_VALUE 17 ++#define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22 + + enum dsa_tag_protocol { + DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, + DSA_TAG_PROTO_BRCM = DSA_TAG_PROTO_BRCM_VALUE, ++ DSA_TAG_PROTO_BRCM_LEGACY = DSA_TAG_PROTO_BRCM_LEGACY_VALUE, + DSA_TAG_PROTO_BRCM_PREPEND = DSA_TAG_PROTO_BRCM_PREPEND_VALUE, + DSA_TAG_PROTO_DSA = DSA_TAG_PROTO_DSA_VALUE, + DSA_TAG_PROTO_EDSA = DSA_TAG_PROTO_EDSA_VALUE, +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -47,6 +47,13 @@ config NET_DSA_TAG_BRCM + Say Y if you want to enable support for tagging frames for the + Broadcom switches which place the tag after the MAC source address. + ++config NET_DSA_TAG_BRCM_LEGACY ++ tristate "Tag driver for Broadcom legacy switches using in-frame headers" ++ select NET_DSA_TAG_BRCM_COMMON ++ help ++ Say Y if you want to enable support for tagging frames for the ++ Broadcom legacy switches which place the tag after the MAC source ++ address. + + config NET_DSA_TAG_BRCM_PREPEND + tristate "Tag driver for Broadcom switches using prepended headers" +--- a/net/dsa/tag_brcm.c ++++ b/net/dsa/tag_brcm.c +@@ -11,9 +11,26 @@ + + #include "dsa_priv.h" + +-/* This tag length is 4 bytes, older ones were 6 bytes, we do not +- * handle them +- */ ++/* Legacy Broadcom tag (6 bytes) */ ++#define BRCM_LEG_TAG_LEN 6 ++ ++/* Type fields */ ++/* 1st byte in the tag */ ++#define BRCM_LEG_TYPE_HI 0x88 ++/* 2nd byte in the tag */ ++#define BRCM_LEG_TYPE_LO 0x74 ++ ++/* Tag fields */ ++/* 3rd byte in the tag */ ++#define BRCM_LEG_UNICAST (0 << 5) ++#define BRCM_LEG_MULTICAST (1 << 5) ++#define BRCM_LEG_EGRESS (2 << 5) ++#define BRCM_LEG_INGRESS (3 << 5) ++ ++/* 6th byte in the tag */ ++#define BRCM_LEG_PORT_ID (0xf) ++ ++/* Newer Broadcom tag (4 bytes) */ + #define BRCM_TAG_LEN 4 + + /* Tag is constructed and desconstructed using byte by byte access +@@ -194,6 +211,87 @@ DSA_TAG_DRIVER(brcm_netdev_ops); + MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM); + #endif + ++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) ++static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb, ++ struct net_device *dev) ++{ ++ struct dsa_port *dp = dsa_slave_to_port(dev); ++ u8 *brcm_tag; ++ ++ /* The Ethernet switch we are interfaced with needs packets to be at ++ * least 64 bytes (including FCS) otherwise they will be discarded when ++ * they enter the switch port logic. When Broadcom tags are enabled, we ++ * need to make sure that packets are at least 70 bytes ++ * (including FCS and tag) because the length verification is done after ++ * the Broadcom tag is stripped off the ingress packet. ++ * ++ * Let dsa_slave_xmit() free the SKB ++ */ ++ if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false)) ++ return NULL; ++ ++ skb_push(skb, BRCM_LEG_TAG_LEN); ++ ++ memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN); ++ ++ brcm_tag = skb->data + 2 * ETH_ALEN; ++ ++ /* Broadcom tag type */ ++ brcm_tag[0] = BRCM_LEG_TYPE_HI; ++ brcm_tag[1] = BRCM_LEG_TYPE_LO; ++ ++ /* Broadcom tag value */ ++ brcm_tag[2] = BRCM_LEG_EGRESS; ++ brcm_tag[3] = 0; ++ brcm_tag[4] = 0; ++ brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID; ++ ++ return skb; ++} ++ ++static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb, ++ struct net_device *dev, ++ struct packet_type *pt) ++{ ++ int source_port; ++ u8 *brcm_tag; ++ ++ if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID))) ++ return NULL; ++ ++ brcm_tag = skb->data - 2; ++ ++ source_port = brcm_tag[5] & BRCM_LEG_PORT_ID; ++ ++ skb->dev = dsa_master_find_slave(dev, 0, source_port); ++ if (!skb->dev) ++ return NULL; ++ ++ /* Remove Broadcom tag and update checksum */ ++ skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN); ++ ++ skb->offload_fwd_mark = 1; ++ ++ /* Move the Ethernet DA and SA */ ++ memmove(skb->data - ETH_HLEN, ++ skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN, ++ 2 * ETH_ALEN); ++ ++ return skb; ++} ++ ++static const struct dsa_device_ops brcm_legacy_netdev_ops = { ++ .name = "brcm-legacy", ++ .proto = DSA_TAG_PROTO_BRCM_LEGACY, ++ .xmit = brcm_leg_tag_xmit, ++ .rcv = brcm_leg_tag_rcv, ++ .overhead = BRCM_LEG_TAG_LEN, ++}; ++ ++DSA_TAG_DRIVER(brcm_legacy_netdev_ops); ++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY); ++#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */ ++ + #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND) + static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb, + struct net_device *dev) +@@ -226,6 +324,9 @@ static struct dsa_tag_driver *dsa_tag_dr + #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM) + &DSA_TAG_DRIVER_NAME(brcm_netdev_ops), + #endif ++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) ++ &DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops), ++#endif + #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND) + &DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops), + #endif diff --git a/target/linux/generic/backport-5.15/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch b/target/linux/generic/backport-5.15/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch new file mode 100644 index 0000000000..838e78a057 --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0005-net-dsa-b53-support-legacy-tags.patch @@ -0,0 +1,53 @@ +From 46c5176c586c81306bf9e7024c13b95da775490f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 17 Mar 2021 11:29:27 +0100 +Subject: [PATCH] net: dsa: b53: support legacy tags +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +These tags are used on BCM5325, BCM5365 and BCM63xx switches. + +Signed-off-by: Álvaro Fernández Rojas +Acked-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/Kconfig | 1 + + drivers/net/dsa/b53/b53_common.c | 12 +++++++----- + 2 files changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/net/dsa/b53/Kconfig ++++ b/drivers/net/dsa/b53/Kconfig +@@ -3,6 +3,7 @@ menuconfig B53 + tristate "Broadcom BCM53xx managed switch support" + depends on NET_DSA + select NET_DSA_TAG_BRCM ++ select NET_DSA_TAG_BRCM_LEGACY + select NET_DSA_TAG_BRCM_PREPEND + help + This driver adds support for Broadcom managed switch chips. It supports +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -2024,15 +2024,17 @@ enum dsa_tag_protocol b53_get_tag_protoc + { + struct b53_device *dev = ds->priv; + +- /* Older models (5325, 5365) support a different tag format that we do +- * not support in net/dsa/tag_brcm.c yet. +- */ +- if (is5325(dev) || is5365(dev) || +- !b53_can_enable_brcm_tags(ds, port, mprot)) { ++ if (!b53_can_enable_brcm_tags(ds, port, mprot)) { + dev->tag_protocol = DSA_TAG_PROTO_NONE; + goto out; + } + ++ /* Older models require a different 6 byte tag */ ++ if (is5325(dev) || is5365(dev) || is63xx(dev)) { ++ dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY; ++ goto out; ++ } ++ + /* Broadcom BCM58xx chips have a flow accelerator on Port 8 + * which requires us to use the prepended Broadcom tag type + */ diff --git a/target/linux/generic/backport-5.15/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch b/target/linux/generic/backport-5.15/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch new file mode 100644 index 0000000000..c1014b20bc --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0006-net-dsa-b53-mmap-Add-device-tree-support.patch @@ -0,0 +1,92 @@ +From a5538a777b73b35750ed1ffff8c1ef539e861624 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Wed, 17 Mar 2021 10:23:17 +0100 +Subject: [PATCH] net: dsa: b53: mmap: Add device tree support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add device tree support to b53_mmap.c while keeping platform devices support. + +Signed-off-by: Álvaro Fernández Rojas +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_mmap.c | 55 ++++++++++++++++++++++++++++++++++ + 1 file changed, 55 insertions(+) + +--- a/drivers/net/dsa/b53/b53_mmap.c ++++ b/drivers/net/dsa/b53/b53_mmap.c +@@ -16,6 +16,7 @@ + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + ++#include + #include + #include + #include +@@ -228,11 +229,65 @@ static const struct b53_io_ops b53_mmap_ + .write64 = b53_mmap_write64, + }; + ++static int b53_mmap_probe_of(struct platform_device *pdev, ++ struct b53_platform_data **ppdata) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *of_ports, *of_port; ++ struct device *dev = &pdev->dev; ++ struct b53_platform_data *pdata; ++ void __iomem *mem; ++ ++ mem = devm_platform_ioremap_resource(pdev, 0); ++ if (IS_ERR(mem)) ++ return PTR_ERR(mem); ++ ++ pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data), ++ GFP_KERNEL); ++ if (!pdata) ++ return -ENOMEM; ++ ++ pdata->regs = mem; ++ pdata->chip_id = BCM63XX_DEVICE_ID; ++ pdata->big_endian = of_property_read_bool(np, "big-endian"); ++ ++ of_ports = of_get_child_by_name(np, "ports"); ++ if (!of_ports) { ++ dev_err(dev, "no ports child node found\n"); ++ return -EINVAL; ++ } ++ ++ for_each_available_child_of_node(of_ports, of_port) { ++ u32 reg; ++ ++ if (of_property_read_u32(of_port, "reg", ®)) ++ continue; ++ ++ if (reg < B53_CPU_PORT) ++ pdata->enabled_ports |= BIT(reg); ++ } ++ ++ of_node_put(of_ports); ++ *ppdata = pdata; ++ ++ return 0; ++} ++ + static int b53_mmap_probe(struct platform_device *pdev) + { ++ struct device_node *np = pdev->dev.of_node; + struct b53_platform_data *pdata = pdev->dev.platform_data; + struct b53_mmap_priv *priv; + struct b53_device *dev; ++ int ret; ++ ++ if (!pdata && np) { ++ ret = b53_mmap_probe_of(pdev, &pdata); ++ if (ret) { ++ dev_err(&pdev->dev, "OF probe error\n"); ++ return ret; ++ } ++ } + + if (!pdata) + return -EINVAL; diff --git a/target/linux/generic/backport-5.15/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch b/target/linux/generic/backport-5.15/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch new file mode 100644 index 0000000000..ea36755732 --- /dev/null +++ b/target/linux/generic/backport-5.15/740-v5.13-0007-net-dsa-b53-spi-add-missing-MODULE_DEVICE_TABLE.patch @@ -0,0 +1,27 @@ +From 866f1577ba69bde2b9f36c300f603596c7d84a62 Mon Sep 17 00:00:00 2001 +From: Qinglang Miao +Date: Thu, 25 Mar 2021 17:19:54 +0800 +Subject: [PATCH] net: dsa: b53: spi: add missing MODULE_DEVICE_TABLE + +This patch adds missing MODULE_DEVICE_TABLE definition which generates +correct modalias for automatic loading of this driver when it is built +as an external module. + +Reported-by: Hulk Robot +Signed-off-by: Qinglang Miao +Acked-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_spi.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/dsa/b53/b53_spi.c ++++ b/drivers/net/dsa/b53/b53_spi.c +@@ -335,6 +335,7 @@ static const struct of_device_id b53_spi + { .compatible = "brcm,bcm53128" }, + { /* sentinel */ } + }; ++MODULE_DEVICE_TABLE(of, b53_spi_of_match); + + static struct spi_driver b53_spi_driver = { + .driver = { diff --git a/target/linux/generic/backport-5.15/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch b/target/linux/generic/backport-5.15/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch new file mode 100644 index 0000000000..2a8def39b8 --- /dev/null +++ b/target/linux/generic/backport-5.15/741-v5.14-0001-net-dsa-b53-Do-not-force-CPU-to-be-always-tagged.patch @@ -0,0 +1,86 @@ +From 2c32a3d3c233b855943677609fe388f82b1f0975 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Tue, 8 Jun 2021 14:22:04 -0700 +Subject: [PATCH] net: dsa: b53: Do not force CPU to be always tagged + +Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all +VLANs") forced the CPU port to be always tagged in any VLAN membership. +This was necessary back then because we did not support Broadcom tags +for all configurations so the only way to differentiate tagged and +untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU +port into being always tagged. + +With most configurations enabling Broadcom tags, especially after +8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x +families") we do not need to apply this unconditional force tagging of +the CPU port in all VLANs. + +A helper function is introduced to faciliate the encapsulation of the +specific condition requiring the CPU port to be tagged in all VLANs and +the dsa_switch_ops::untag_bridge_pvid boolean is moved to when +dsa_switch_ops::setup is called when we have already determined the +tagging protocol we will be using. + +Reported-by: Matthew Hagan +Signed-off-by: Florian Fainelli +Reviewed-by: Vladimir Oltean +Tested-by: Matthew Hagan +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_common.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -1049,6 +1049,11 @@ static int b53_setup(struct dsa_switch * + unsigned int port; + int ret; + ++ /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set ++ * which forces the CPU port to be tagged in all VLANs. ++ */ ++ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; ++ + ret = b53_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); +@@ -1423,6 +1428,13 @@ int b53_vlan_prepare(struct dsa_switch * + return 0; + } + EXPORT_SYMBOL(b53_vlan_prepare); ++ ++static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) ++{ ++ struct b53_device *dev = ds->priv; ++ ++ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); ++} + + void b53_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +@@ -1442,7 +1454,7 @@ void b53_vlan_add(struct dsa_switch *ds, + untagged = true; + + vl->members |= BIT(port); +- if (untagged && !dsa_is_cpu_port(ds, port)) ++ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag |= BIT(port); + else + vl->untag &= ~BIT(port); +@@ -1480,7 +1492,7 @@ int b53_vlan_del(struct dsa_switch *ds, + if (pvid == vid) + pvid = b53_default_pvid(dev); + +- if (untagged && !dsa_is_cpu_port(ds, port)) ++ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag &= ~(BIT(port)); + + b53_set_vlan_entry(dev, vid, vl); +@@ -2644,7 +2656,6 @@ struct b53_device *b53_switch_alloc(stru + dev->ops = ops; + ds->ops = &b53_switch_ops; + ds->configure_vlan_while_not_filtering = true; +- ds->untag_bridge_pvid = true; + dev->vlan_enabled = ds->configure_vlan_while_not_filtering; + /* Let DSA handle the case were multiple bridges span the same switch + * device and different VLAN awareness settings are requested, which diff --git a/target/linux/generic/backport-5.15/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch b/target/linux/generic/backport-5.15/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch new file mode 100644 index 0000000000..ee3a71ffa5 --- /dev/null +++ b/target/linux/generic/backport-5.15/741-v5.14-0002-net-dsa-b53-remove-redundant-null-check-on-dev.patch @@ -0,0 +1,30 @@ +From 11b57faf951cd3a570e3d9e463fc7c41023bc8c6 Mon Sep 17 00:00:00 2001 +From: Colin Ian King +Date: Tue, 15 Jun 2021 10:05:16 +0100 +Subject: [PATCH] net: dsa: b53: remove redundant null check on dev + +The pointer dev can never be null, the null check is redundant +and can be removed. Cleans up a static analysis warning that +pointer priv is dereferencing dev before dev is being null +checked. + +Addresses-Coverity: ("Dereference before null check") +Signed-off-by: Colin Ian King +Acked-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_srab.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/net/dsa/b53/b53_srab.c ++++ b/drivers/net/dsa/b53/b53_srab.c +@@ -632,8 +632,7 @@ static int b53_srab_remove(struct platfo + struct b53_srab_priv *priv = dev->priv; + + b53_srab_intr_set(priv, false); +- if (dev) +- b53_switch_remove(dev); ++ b53_switch_remove(dev); + + return 0; + } diff --git a/target/linux/generic/backport-5.15/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch b/target/linux/generic/backport-5.15/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch new file mode 100644 index 0000000000..df891d68ab --- /dev/null +++ b/target/linux/generic/backport-5.15/741-v5.14-0003-net-dsa-b53-Create-default-VLAN-entry-explicitly.patch @@ -0,0 +1,71 @@ +From 64a81b24487f0d2fba0f033029eec2abc7d82cee Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Mon, 21 Jun 2021 15:10:55 -0700 +Subject: [PATCH] net: dsa: b53: Create default VLAN entry explicitly + +In case CONFIG_VLAN_8021Q is not set, there will be no call down to the +b53 driver to ensure that the default PVID VLAN entry will be configured +with the appropriate untagged attribute towards the CPU port. We were +implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, +instead make it explicit. + +Reported-by: Vladimir Oltean +Signed-off-by: Florian Fainelli +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/b53/b53_common.c | 27 +++++++++++++++++++-------- + 1 file changed, 19 insertions(+), 8 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -693,6 +693,13 @@ static u16 b53_default_pvid(struct b53_d + return 0; + } + ++static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) ++{ ++ struct b53_device *dev = ds->priv; ++ ++ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); ++} ++ + int b53_configure_vlan(struct dsa_switch *ds) + { + struct b53_device *dev = ds->priv; +@@ -713,9 +720,20 @@ int b53_configure_vlan(struct dsa_switch + + b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); + +- b53_for_each_port(dev, i) ++ /* Create an untagged VLAN entry for the default PVID in case ++ * CONFIG_VLAN_8021Q is disabled and there are no calls to ++ * dsa_slave_vlan_rx_add_vid() to create the default VLAN ++ * entry. Do this only when the tagging protocol is not ++ * DSA_TAG_PROTO_NONE ++ */ ++ b53_for_each_port(dev, i) { ++ v = &dev->vlans[def_vid]; ++ v->members |= BIT(i); ++ if (!b53_vlan_port_needs_forced_tagged(ds, i)) ++ v->untag = v->members; + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), def_vid); ++ } + + /* Upon initial call we have not set-up any VLANs, but upon + * system resume, we need to restore all VLAN entries. +@@ -1429,13 +1447,6 @@ int b53_vlan_prepare(struct dsa_switch * + } + EXPORT_SYMBOL(b53_vlan_prepare); + +-static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) +-{ +- struct b53_device *dev = ds->priv; +- +- return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); +-} +- + void b53_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) + { diff --git a/target/linux/generic/backport-5.15/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch b/target/linux/generic/backport-5.15/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch new file mode 100644 index 0000000000..16aa0711ad --- /dev/null +++ b/target/linux/generic/backport-5.15/742-v5.16-net-phy-at803x-add-support-for-qca-8327-internal-phy.patch @@ -0,0 +1,48 @@ +From 0ccf8511182436183c031e8a2f740ae91a02c625 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 14 Sep 2021 14:33:45 +0200 +Subject: net: phy: at803x: add support for qca 8327 internal phy + +Add support for qca8327 internal phy needed for correct init of the +switch port. It does use the same qca8337 function and reg just with a +different id. + +Signed-off-by: Ansuel Smith +Tested-by: Rosen Penev +Tested-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1328,6 +1328,19 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, ++}, { ++ /* QCA8327 */ ++ .phy_id = QCA8327_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "QCA PHY 8327", ++ /* PHY_GBIT_FEATURES */ ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, + }, }; + + module_phy_driver(at803x_driver); +@@ -1338,6 +1351,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, ++ { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, ++ { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) }, + { } + }; + diff --git a/target/linux/generic/backport-5.15/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch b/target/linux/generic/backport-5.15/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch new file mode 100644 index 0000000000..d80b5db714 --- /dev/null +++ b/target/linux/generic/backport-5.15/743-v5.16-0001-net-dsa-b53-Include-all-ports-in-enabled_ports.patch @@ -0,0 +1,131 @@ +From 983d96a9116a328668601555d96736261d33170c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 Sep 2021 14:03:51 +0200 +Subject: [PATCH] net: dsa: b53: Include all ports in "enabled_ports" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Make "enabled_ports" bitfield contain all available switch ports +including a CPU port. This way there is no need for fixup during +initialization. + +For BCM53010, BCM53018 and BCM53019 include also other available ports. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Florian Fainelli +Tested-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/b53/b53_common.c | 23 +++++++++++------------ + 1 file changed, 11 insertions(+), 12 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -2288,7 +2288,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5325_DEVICE_ID, + .dev_name = "BCM5325", + .vlans = 16, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x3f, + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, +@@ -2299,7 +2299,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5365_DEVICE_ID, + .dev_name = "BCM5365", + .vlans = 256, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x3f, + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, +@@ -2310,7 +2310,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5389_DEVICE_ID, + .dev_name = "BCM5389", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2324,7 +2324,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5395_DEVICE_ID, + .dev_name = "BCM5395", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2338,7 +2338,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5397_DEVICE_ID, + .dev_name = "BCM5397", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2352,7 +2352,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM5398_DEVICE_ID, + .dev_name = "BCM5398", + .vlans = 4096, +- .enabled_ports = 0x7f, ++ .enabled_ports = 0x17f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2366,7 +2366,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM53115_DEVICE_ID, + .dev_name = "BCM53115", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .vta_regs = B53_VTA_REGS, +@@ -2380,7 +2380,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM53125_DEVICE_ID, + .dev_name = "BCM53125", + .vlans = 4096, +- .enabled_ports = 0xff, ++ .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2422,7 +2422,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM53010_DEVICE_ID, + .dev_name = "BCM53010", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2464,7 +2464,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM53018_DEVICE_ID, + .dev_name = "BCM53018", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2478,7 +2478,7 @@ static const struct b53_chip_data b53_sw + .chip_id = BCM53019_DEVICE_ID, + .dev_name = "BCM53019", + .vlans = 4096, +- .enabled_ports = 0x1f, ++ .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +@@ -2605,7 +2605,6 @@ static int b53_switch_init(struct b53_de + dev->cpu_port = 5; + } + +- dev->enabled_ports |= BIT(dev->cpu_port); + dev->num_ports = fls(dev->enabled_ports); + + dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS); diff --git a/target/linux/generic/backport-5.15/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch b/target/linux/generic/backport-5.15/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch new file mode 100644 index 0000000000..4a4f8e940d --- /dev/null +++ b/target/linux/generic/backport-5.15/743-v5.16-0002-net-dsa-b53-Drop-BCM5301x-workaround-for-a-wrong-CPU.patch @@ -0,0 +1,42 @@ +From b290c6384afabbca5ae6e2af72fb1b2bc37922be Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 Sep 2021 14:03:52 +0200 +Subject: [PATCH] net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP + port +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +On BCM5301x port 8 requires a fixed link when used. + +Years ago when b53 was an OpenWrt downstream driver (with configuration +based on sometimes bugged NVRAM) there was a need for a fixup. In case +of forcing fixed link for (incorrectly specified) port 5 the code had to +actually setup port 8 link. + +For upstream b53 driver with setup based on DT there is no need for that +workaround. In DT we have and require correct ports setup. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Florian Fainelli +Tested-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/b53/b53_common.c | 6 ------ + 1 file changed, 6 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -1256,12 +1256,6 @@ static void b53_adjust_link(struct dsa_s + return; + } + } +- } else if (is5301x(dev)) { +- if (port != dev->cpu_port) { +- b53_force_port_config(dev, dev->cpu_port, 2000, +- DUPLEX_FULL, true, true); +- b53_force_link(dev, dev->cpu_port, 1); +- } + } + + /* Re-negotiate EEE if it was enabled already */ diff --git a/target/linux/generic/backport-5.15/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch b/target/linux/generic/backport-5.15/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch new file mode 100644 index 0000000000..3954ee4aac --- /dev/null +++ b/target/linux/generic/backport-5.15/743-v5.16-0003-net-dsa-b53-Improve-flow-control-setup-on-BCM5301x.patch @@ -0,0 +1,32 @@ +From 3ff26b29230c54fea2353b63124c589b61953e14 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 Sep 2021 14:03:53 +0200 +Subject: [PATCH] net: dsa: b53: Improve flow control setup on BCM5301x +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +According to the Broadcom's reference driver flow control needs to be +enabled for any CPU switch port (5, 7 or 8 - depending on which one is +used). Current code makes it work only for the port 5. Use +dsa_is_cpu_port() which solved that problem. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Florian Fainelli +Tested-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/b53/b53_common.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -1187,7 +1187,7 @@ static void b53_adjust_link(struct dsa_s + return; + + /* Enable flow control on BCM5301x's CPU port */ +- if (is5301x(dev) && port == dev->cpu_port) ++ if (is5301x(dev) && dsa_is_cpu_port(ds, port)) + tx_pause = rx_pause = true; + + if (phydev->pause) { diff --git a/target/linux/generic/backport-5.15/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch b/target/linux/generic/backport-5.15/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch new file mode 100644 index 0000000000..9e687b1488 --- /dev/null +++ b/target/linux/generic/backport-5.15/743-v5.16-0004-net-dsa-b53-Drop-unused-cpu_port-field.patch @@ -0,0 +1,205 @@ +From 7d5af56418d7d01e43247a33b6fe6492ea871923 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 Sep 2021 14:03:54 +0200 +Subject: [PATCH] net: dsa: b53: Drop unused "cpu_port" field +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's set but never used anymore. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Florian Fainelli +Tested-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/b53/b53_common.c | 28 ---------------------------- + drivers/net/dsa/b53/b53_priv.h | 1 - + 2 files changed, 29 deletions(-) + +--- a/drivers/net/dsa/b53/b53_common.c ++++ b/drivers/net/dsa/b53/b53_common.c +@@ -2286,7 +2286,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, +- .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { +@@ -2297,7 +2296,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, +- .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { +@@ -2308,7 +2306,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2322,7 +2319,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2336,7 +2332,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2350,7 +2345,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2365,7 +2359,6 @@ static const struct b53_chip_data b53_sw + .arl_buckets = 1024, + .vta_regs = B53_VTA_REGS, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, +@@ -2378,7 +2371,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2392,7 +2384,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2406,7 +2397,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_63XX, + .duplex_reg = B53_DUPLEX_STAT_63XX, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, +@@ -2420,7 +2410,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2434,7 +2423,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2448,7 +2436,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2462,7 +2449,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2476,7 +2462,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2490,7 +2475,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2504,7 +2488,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2518,7 +2501,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2532,7 +2514,6 @@ static const struct b53_chip_data b53_sw + .arl_bins = 4, + .arl_buckets = 256, + .imp_port = 8, +- .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, +@@ -2558,7 +2539,6 @@ static int b53_switch_init(struct b53_de + dev->vta_regs[2] = chip->vta_regs[2]; + dev->jumbo_pm_reg = chip->jumbo_pm_reg; + dev->imp_port = chip->imp_port; +- dev->cpu_port = chip->cpu_port; + dev->num_vlans = chip->vlans; + dev->num_arl_bins = chip->arl_bins; + dev->num_arl_buckets = chip->arl_buckets; +@@ -2590,13 +2570,6 @@ static int b53_switch_init(struct b53_de + break; + #endif + } +- } else if (dev->chip_id == BCM53115_DEVICE_ID) { +- u64 strap_value; +- +- b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value); +- /* use second IMP port if GMII is enabled */ +- if (strap_value & SV_GMII_CTRL_115) +- dev->cpu_port = 5; + } + + dev->num_ports = fls(dev->enabled_ports); +--- a/drivers/net/dsa/b53/b53_priv.h ++++ b/drivers/net/dsa/b53/b53_priv.h +@@ -123,7 +123,6 @@ struct b53_device { + /* used ports mask */ + u16 enabled_ports; + unsigned int imp_port; +- unsigned int cpu_port; + + /* connect specific data */ + u8 current_page; diff --git a/target/linux/generic/backport-5.15/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch b/target/linux/generic/backport-5.15/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch new file mode 100644 index 0000000000..ab4fdf8509 --- /dev/null +++ b/target/linux/generic/backport-5.15/744-v5.15-net-dsa-don-t-set-skb-offload_fwd_mark-when-not-offl.patch @@ -0,0 +1,138 @@ +From bea7907837c57a0aaac009931eb14efb056dafab Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 29 Jul 2021 17:56:00 +0300 +Subject: [PATCH] net: dsa: don't set skb->offload_fwd_mark when not offloading + the bridge + +DSA has gained the recent ability to deal gracefully with upper +interfaces it cannot offload, such as the bridge, bonding or team +drivers. When such uppers exist, the ports are still in standalone mode +as far as the hardware is concerned. + +But when we deliver packets to the software bridge in order for that to +do the forwarding, there is an unpleasant surprise in that the bridge +will refuse to forward them. This is because we unconditionally set +skb->offload_fwd_mark = true, meaning that the bridge thinks the frames +were already forwarded in hardware by us. + +Since dp->bridge_dev is populated only when there is hardware offload +for it, but not in the software fallback case, let's introduce a new +helper that can be called from the tagger data path which sets the +skb->offload_fwd_mark accordingly to zero when there is no hardware +offload for bridging. This lets the bridge forward packets back to other +interfaces of our switch, if needed. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Tobias Waldekranz +Signed-off-by: David S. Miller +--- + net/dsa/dsa_priv.h | 14 ++++++++++++++ + net/dsa/tag_brcm.c | 4 ++-- + net/dsa/tag_dsa.c | 15 +++++++++++---- + net/dsa/tag_ksz.c | 2 +- + net/dsa/tag_lan9303.c | 3 ++- + net/dsa/tag_mtk.c | 2 +- + net/dsa/tag_ocelot.c | 2 +- + net/dsa/tag_rtl4_a.c | 2 +- + net/dsa/tag_sja1105.c | 20 ++++++++++++++------ + 9 files changed, 47 insertions(+), 17 deletions(-) + +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -266,6 +266,20 @@ static inline struct sk_buff *dsa_untag_ + return skb; + } + ++/* If the ingress port offloads the bridge, we mark the frame as autonomously ++ * forwarded by hardware, so the software bridge doesn't forward in twice, back ++ * to us, because we already did. However, if we're in fallback mode and we do ++ * software bridging, we are not offloading it, therefore the dp->bridge_dev ++ * pointer is not populated, and flooding needs to be done by software (we are ++ * effectively operating in standalone ports mode). ++ */ ++static inline void dsa_default_offload_fwd_mark(struct sk_buff *skb) ++{ ++ struct dsa_port *dp = dsa_slave_to_port(skb->dev); ++ ++ skb->offload_fwd_mark = !!(dp->bridge_dev); ++} ++ + /* switch.c */ + int dsa_switch_register_notifier(struct dsa_switch *ds); + void dsa_switch_unregister_notifier(struct dsa_switch *ds); +--- a/net/dsa/tag_brcm.c ++++ b/net/dsa/tag_brcm.c +@@ -166,7 +166,7 @@ static struct sk_buff *brcm_tag_rcv_ll(s + /* Remove Broadcom tag and update checksum */ + skb_pull_rcsum(skb, BRCM_TAG_LEN); + +- skb->offload_fwd_mark = 1; ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } +@@ -270,7 +270,7 @@ static struct sk_buff *brcm_leg_tag_rcv( + /* Remove Broadcom tag and update checksum */ + skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN); + +- skb->offload_fwd_mark = 1; ++ dsa_default_offload_fwd_mark(skb); + + /* Move the Ethernet DA and SA */ + memmove(skb->data - ETH_HLEN, +--- a/net/dsa/tag_ksz.c ++++ b/net/dsa/tag_ksz.c +@@ -24,7 +24,7 @@ static struct sk_buff *ksz_common_rcv(st + + pskb_trim_rcsum(skb, skb->len - len); + +- skb->offload_fwd_mark = true; ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } +--- a/net/dsa/tag_lan9303.c ++++ b/net/dsa/tag_lan9303.c +@@ -115,7 +115,8 @@ static struct sk_buff *lan9303_rcv(struc + skb_pull_rcsum(skb, 2 + 2); + memmove(skb->data - ETH_HLEN, skb->data - (ETH_HLEN + LAN9303_TAG_LEN), + 2 * ETH_ALEN); +- skb->offload_fwd_mark = !(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU); ++ if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU)) ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } +--- a/net/dsa/tag_mtk.c ++++ b/net/dsa/tag_mtk.c +@@ -104,7 +104,7 @@ static struct sk_buff *mtk_tag_rcv(struc + + /* Only unicast or broadcast frames are offloaded */ + if (likely(!is_multicast_skb)) +- skb->offload_fwd_mark = 1; ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } +--- a/net/dsa/tag_ocelot.c ++++ b/net/dsa/tag_ocelot.c +@@ -225,7 +225,7 @@ static struct sk_buff *ocelot_rcv(struct + */ + return NULL; + +- skb->offload_fwd_mark = 1; ++ dsa_default_offload_fwd_mark(skb); + skb->priority = qos_class; + + /* Ocelot switches copy frames unmodified to the CPU. However, it is +--- a/net/dsa/tag_rtl4_a.c ++++ b/net/dsa/tag_rtl4_a.c +@@ -115,7 +115,7 @@ static struct sk_buff *rtl4a_tag_rcv(str + skb->data - ETH_HLEN - RTL4_A_HDR_LEN, + 2 * ETH_ALEN); + +- skb->offload_fwd_mark = 1; ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } diff --git a/target/linux/generic/backport-5.15/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch b/target/linux/generic/backport-5.15/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch new file mode 100644 index 0000000000..c82bf913a0 --- /dev/null +++ b/target/linux/generic/backport-5.15/745-v5.16-01-net-phy-at803x-add-support-for-qca-8327-A-variant.patch @@ -0,0 +1,65 @@ +From b4df02b562f4aa14ff6811f30e1b4d2159585c59 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 19 Sep 2021 18:28:15 +0200 +Subject: net: phy: at803x: add support for qca 8327 A variant internal phy + +For qca8327 internal phy there are 2 different switch variant with 2 +different phy id. Add this missing variant so the internal phy can be +correctly identified and fixed. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 25 ++++++++++++++++++++----- + 1 file changed, 20 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -148,7 +148,8 @@ + #define AT803X_PAGE_FIBER 0 + #define AT803X_PAGE_COPPER 1 + +-#define QCA8327_PHY_ID 0x004dd034 ++#define QCA8327_A_PHY_ID 0x004dd033 ++#define QCA8327_B_PHY_ID 0x004dd034 + #define QCA8337_PHY_ID 0x004dd036 + #define QCA8K_PHY_ID_MASK 0xffffffff + +@@ -1329,10 +1330,23 @@ static struct phy_driver at803x_driver[] + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, + }, { +- /* QCA8327 */ +- .phy_id = QCA8327_PHY_ID, ++ /* QCA8327-A from switch QCA8327-AL1A */ ++ .phy_id = QCA8327_A_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, +- .name = "QCA PHY 8327", ++ .name = "QCA PHY 8327-A", ++ /* PHY_GBIT_FEATURES */ ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, ++}, { ++ /* QCA8327-B from switch QCA8327-BL1A */ ++ .phy_id = QCA8327_B_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "QCA PHY 8327-B", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, +@@ -1352,7 +1366,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, +- { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) }, ++ { PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) }, ++ { PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) }, + { } + }; + diff --git a/target/linux/generic/backport-5.15/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch b/target/linux/generic/backport-5.15/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch new file mode 100644 index 0000000000..be24fd5cf7 --- /dev/null +++ b/target/linux/generic/backport-5.15/745-v5.16-02-net-phy-at803x-add-resume-suspend-function-to-qca83x.patch @@ -0,0 +1,45 @@ +From 15b9df4ece17d084f14eb0ca1cf05f2ad497e425 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 19 Sep 2021 18:28:16 +0200 +Subject: net: phy: at803x: add resume/suspend function to qca83xx phy + +Add resume/suspend function to qca83xx internal phy. +We can't use the at803x generic function as the documentation lacks of +any support for WoL regs. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1329,6 +1329,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, + }, { + /* QCA8327-A from switch QCA8327-AL1A */ + .phy_id = QCA8327_A_PHY_ID, +@@ -1342,6 +1344,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, + }, { + /* QCA8327-B from switch QCA8327-BL1A */ + .phy_id = QCA8327_B_PHY_ID, +@@ -1355,6 +1359,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, + }, }; + + module_phy_driver(at803x_driver); diff --git a/target/linux/generic/backport-5.15/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch b/target/linux/generic/backport-5.15/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch new file mode 100644 index 0000000000..23f574c76f --- /dev/null +++ b/target/linux/generic/backport-5.15/745-v5.16-03-net-phy-at803x-fix-spacing-and-improve-name-for-83xx.patch @@ -0,0 +1,95 @@ +From d44fd8604a4ab92119adb35f05fd87612af722b5 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 19 Sep 2021 18:28:17 +0200 +Subject: net: phy: at803x: fix spacing and improve name for 83xx phy + +Fix spacing and improve name for 83xx phy following other phy in the +same driver. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 60 ++++++++++++++++++++++++------------------------ + 1 file changed, 30 insertions(+), 30 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1318,47 +1318,47 @@ static struct phy_driver at803x_driver[] + .config_aneg = at803x_config_aneg, + }, { + /* QCA8337 */ +- .phy_id = QCA8337_PHY_ID, +- .phy_id_mask = QCA8K_PHY_ID_MASK, +- .name = "QCA PHY 8337", ++ .phy_id = QCA8337_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "Qualcomm Atheros 8337 internal PHY", + /* PHY_GBIT_FEATURES */ +- .probe = at803x_probe, +- .flags = PHY_IS_INTERNAL, +- .config_init = qca83xx_config_init, +- .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, + }, { + /* QCA8327-A from switch QCA8327-AL1A */ +- .phy_id = QCA8327_A_PHY_ID, +- .phy_id_mask = QCA8K_PHY_ID_MASK, +- .name = "QCA PHY 8327-A", ++ .phy_id = QCA8327_A_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "Qualcomm Atheros 8327-A internal PHY", + /* PHY_GBIT_FEATURES */ +- .probe = at803x_probe, +- .flags = PHY_IS_INTERNAL, +- .config_init = qca83xx_config_init, +- .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, + }, { + /* QCA8327-B from switch QCA8327-BL1A */ +- .phy_id = QCA8327_B_PHY_ID, +- .phy_id_mask = QCA8K_PHY_ID_MASK, +- .name = "QCA PHY 8327-B", ++ .phy_id = QCA8327_B_PHY_ID, ++ .phy_id_mask = QCA8K_PHY_ID_MASK, ++ .name = "Qualcomm Atheros 8327-B internal PHY", + /* PHY_GBIT_FEATURES */ +- .probe = at803x_probe, +- .flags = PHY_IS_INTERNAL, +- .config_init = qca83xx_config_init, +- .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .probe = at803x_probe, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = qca83xx_config_init, ++ .soft_reset = genphy_soft_reset, ++ .get_sset_count = at803x_get_sset_count, ++ .get_strings = at803x_get_strings, ++ .get_stats = at803x_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, + }, }; diff --git a/target/linux/generic/backport-5.15/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch b/target/linux/generic/backport-5.15/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch new file mode 100644 index 0000000000..5dfe27dd24 --- /dev/null +++ b/target/linux/generic/backport-5.15/746-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch @@ -0,0 +1,131 @@ +From ba3c01ee02ed0d821c9f241f179bbc9457542b8f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:15 +0200 +Subject: net: phy: at803x: fix resume for QCA8327 phy + +From Documentation phy resume triggers phy reset and restart +auto-negotiation. Add a dedicated function to wait reset to finish as +it was notice a regression where port sometime are not reliable after a +suspend/resume session. The reset wait logic is copied from phy_poll_reset. +Add dedicated suspend function to use genphy_suspend only with QCA8337 +phy and set only additional debug settings for QCA8327. With more test +it was reported that QCA8327 doesn't proprely support this mode and +using this cause the unreliability of the switch ports, especially the +malfunction of the port0. + +Fixes: 15b9df4ece17 ("net: phy: at803x: add resume/suspend function to qca83xx phy") +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 69 +++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 63 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -92,9 +92,14 @@ + #define AT803X_DEBUG_REG_5 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + ++#define AT803X_DEBUG_REG_HIB_CTRL 0x0b ++#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) ++#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) ++ + #define AT803X_DEBUG_REG_3C 0x3C + + #define AT803X_DEBUG_REG_3D 0x3D ++#define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + + #define AT803X_DEBUG_REG_1F 0x1F + #define AT803X_DEBUG_PLL_ON BIT(2) +@@ -1220,6 +1225,58 @@ static int qca83xx_config_init(struct ph + return 0; + } + ++static int qca83xx_resume(struct phy_device *phydev) ++{ ++ int ret, val; ++ ++ /* Skip reset if not suspended */ ++ if (!phydev->suspended) ++ return 0; ++ ++ /* Reinit the port, reset values set by suspend */ ++ qca83xx_config_init(phydev); ++ ++ /* Reset the port on port resume */ ++ phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); ++ ++ /* On resume from suspend the switch execute a reset and ++ * restart auto-negotiation. Wait for reset to complete. ++ */ ++ ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), ++ 50000, 600000, true); ++ if (ret) ++ return ret; ++ ++ msleep(1); ++ ++ return 0; ++} ++ ++static int qca83xx_suspend(struct phy_device *phydev) ++{ ++ u16 mask = 0; ++ ++ /* Only QCA8337 support actual suspend. ++ * QCA8327 cause port unreliability when phy suspend ++ * is set. ++ */ ++ if (phydev->drv->phy_id == QCA8337_PHY_ID) { ++ genphy_suspend(phydev); ++ } else { ++ mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); ++ phy_modify(phydev, MII_BMCR, mask, 0); ++ } ++ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D, ++ AT803X_DEBUG_GATE_CLK_IN1000, 0); ++ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, ++ AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE | ++ AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0); ++ ++ return 0; ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* Qualcomm Atheros AR8035 */ +@@ -1329,8 +1386,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, { + /* QCA8327-A from switch QCA8327-AL1A */ + .phy_id = QCA8327_A_PHY_ID, +@@ -1344,8 +1401,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, { + /* QCA8327-B from switch QCA8327-BL1A */ + .phy_id = QCA8327_B_PHY_ID, +@@ -1359,8 +1416,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, }; + + module_phy_driver(at803x_driver); diff --git a/target/linux/generic/backport-5.15/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch b/target/linux/generic/backport-5.15/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch new file mode 100644 index 0000000000..aeb43e2f67 --- /dev/null +++ b/target/linux/generic/backport-5.15/746-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch @@ -0,0 +1,91 @@ +From 1ca8311949aec5c9447645731ef1c6bc5bd71350 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:16 +0200 +Subject: net: phy: at803x: add DAC amplitude fix for 8327 phy + +QCA8327 internal phy require DAC amplitude adjustement set to +6% with +100m speed. Also add additional define to report a change of the same +reg in QCA8337. (different scope it does set 1000m voltage) +Add link_change_notify function to set the proper amplitude adjustement +on PHY_RUNNING state and disable on any other state. + +Fixes: b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy") +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -87,6 +87,8 @@ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + + #define AT803X_DEBUG_REG_0 0x00 ++#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) ++#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + + #define AT803X_DEBUG_REG_5 0x05 +@@ -1222,9 +1224,37 @@ static int qca83xx_config_init(struct ph + break; + } + ++ /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. ++ * Disable on init and enable only with 100m speed following ++ * qca original source code. ++ */ ++ if (phydev->drv->phy_id == QCA8327_A_PHY_ID || ++ phydev->drv->phy_id == QCA8327_B_PHY_ID) ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, 0); ++ + return 0; + } + ++static void qca83xx_link_change_notify(struct phy_device *phydev) ++{ ++ /* QCA8337 doesn't require DAC Amplitude adjustement */ ++ if (phydev->drv->phy_id == QCA8337_PHY_ID) ++ return; ++ ++ /* Set DAC Amplitude adjustment to +6% for 100m on link running */ ++ if (phydev->state == PHY_RUNNING) { ++ if (phydev->speed == SPEED_100) ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, ++ QCA8327_DEBUG_MANU_CTRL_EN); ++ } else { ++ /* Reset DAC Amplitude adjustment */ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, 0); ++ } ++} ++ + static int qca83xx_resume(struct phy_device *phydev) + { + int ret, val; +@@ -1379,6 +1409,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8337 internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, +@@ -1394,6 +1425,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-A internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, +@@ -1409,6 +1441,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-B internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, diff --git a/target/linux/generic/backport-5.15/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch b/target/linux/generic/backport-5.15/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch new file mode 100644 index 0000000000..2352fa0e44 --- /dev/null +++ b/target/linux/generic/backport-5.15/746-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch @@ -0,0 +1,27 @@ +From 9d1c29b4028557a496be9c5eb2b4b86063700636 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:17 +0200 +Subject: net: phy: at803x: enable prefer master for 83xx internal phy + +From original QCA source code the port was set to prefer master as port +type in 1000BASE-T mode. Apply the same settings also here. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1233,6 +1233,9 @@ static int qca83xx_config_init(struct ph + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + ++ /* Following original QCA sourcecode set port to prefer master */ ++ phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); ++ + return 0; + } + diff --git a/target/linux/generic/backport-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch b/target/linux/generic/backport-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch new file mode 100644 index 0000000000..9c28a893f1 --- /dev/null +++ b/target/linux/generic/backport-5.15/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch @@ -0,0 +1,127 @@ +From 67999555ff42e91de7654488d9a7735bd9e84555 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:18 +0200 +Subject: net: phy: at803x: better describe debug regs + +Give a name to known debug regs from Documentation instead of using +unknown hex values. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -86,12 +86,12 @@ + #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + +-#define AT803X_DEBUG_REG_0 0x00 ++#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 + #define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) + #define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + +-#define AT803X_DEBUG_REG_5 0x05 ++#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + + #define AT803X_DEBUG_REG_HIB_CTRL 0x0b +@@ -100,7 +100,7 @@ + + #define AT803X_DEBUG_REG_3C 0x3C + +-#define AT803X_DEBUG_REG_3D 0x3D ++#define AT803X_DEBUG_REG_GREEN 0x3D + #define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + + #define AT803X_DEBUG_REG_1F 0x1F +@@ -274,25 +274,25 @@ static int at803x_read_page(struct phy_d + + static int at803x_enable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0, + AT803X_DEBUG_RX_CLK_DLY_EN); + } + + static int at803x_enable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0, + AT803X_DEBUG_TX_CLK_DLY_EN); + } + + static int at803x_disable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + AT803X_DEBUG_RX_CLK_DLY_EN, 0); + } + + static int at803x_disable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, + AT803X_DEBUG_TX_CLK_DLY_EN, 0); + } + +@@ -1208,9 +1208,9 @@ static int qca83xx_config_init(struct ph + switch (switch_revision) { + case 1: + /* For 100M waveform */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea); + /* Turn on Gigabit clock */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0); + break; + + case 2: +@@ -1218,8 +1218,8 @@ static int qca83xx_config_init(struct ph + fallthrough; + case 4: + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); + break; + } +@@ -1230,7 +1230,7 @@ static int qca83xx_config_init(struct ph + */ + if (phydev->drv->phy_id == QCA8327_A_PHY_ID || + phydev->drv->phy_id == QCA8327_B_PHY_ID) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + + /* Following original QCA sourcecode set port to prefer master */ +@@ -1248,12 +1248,12 @@ static void qca83xx_link_change_notify(s + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, + QCA8327_DEBUG_MANU_CTRL_EN); + } else { + /* Reset DAC Amplitude adjustment */ +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + } + } +@@ -1300,7 +1300,7 @@ static int qca83xx_suspend(struct phy_de + phy_modify(phydev, MII_BMCR, mask, 0); + } + +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, + AT803X_DEBUG_GATE_CLK_IN1000, 0); + + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, diff --git a/target/linux/generic/backport-5.15/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch b/target/linux/generic/backport-5.15/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch new file mode 100644 index 0000000000..c8d424de38 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch @@ -0,0 +1,80 @@ +From d8b6f5bae6d3b648a67b6958cb98e4e97256d652 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:06 +0200 +Subject: dsa: qca8k: add mac_power_sel support + +Add missing mac power sel support needed for ipq8064/5 SoC that require +1.8v for the internal regulator port instead of the default 1.5v. +If other device needs this, consider adding a dedicated binding to +support this. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 31 +++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 5 +++++ + 2 files changed, 36 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -951,6 +951,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_ + } + + static int ++qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) ++{ ++ u32 mask = 0; ++ int ret = 0; ++ ++ /* SoC specific settings for ipq8064. ++ * If more device require this consider adding ++ * a dedicated binding. ++ */ ++ if (of_machine_is_compatible("qcom,ipq8064")) ++ mask |= QCA8K_MAC_PWR_RGMII0_1_8V; ++ ++ /* SoC specific settings for ipq8065 */ ++ if (of_machine_is_compatible("qcom,ipq8065")) ++ mask |= QCA8K_MAC_PWR_RGMII1_1_8V; ++ ++ if (mask) { ++ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL, ++ QCA8K_MAC_PWR_RGMII0_1_8V | ++ QCA8K_MAC_PWR_RGMII1_1_8V, ++ mask); ++ } ++ ++ return ret; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_mac_pwr_sel(priv); ++ if (ret) ++ return ret; ++ + /* Enable CPU Port */ + ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -100,6 +100,11 @@ + #define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22) + #define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22) + ++/* MAC_PWR_SEL registers */ ++#define QCA8K_REG_MAC_PWR_SEL 0x0e4 ++#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18) ++#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19) ++ + /* EEE control registers */ + #define QCA8K_REG_EEE_CTRL 0x100 + #define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2) diff --git a/target/linux/generic/backport-5.15/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch b/target/linux/generic/backport-5.15/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch new file mode 100644 index 0000000000..bd768ec27d --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch @@ -0,0 +1,30 @@ +From fdbf35df9c091db9c46e57e9938e3f7a4f603a7c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:07 +0200 +Subject: dt-bindings: net: dsa: qca8k: Add SGMII clock phase properties + +Add names and descriptions of additional PORT0_PAD_CTRL properties. +qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock +phase to failling edge. + +Co-developed-by: Matthew Hagan +Signed-off-by: Matthew Hagan +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -37,6 +37,10 @@ A CPU port node has the following option + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. ++- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. ++ Mostly used in qca8327 with CPU port 0 set to ++ sgmii. ++- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. + + For QCA8K the 'fixed-link' sub-node supports only the following properties: + diff --git a/target/linux/generic/backport-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch b/target/linux/generic/backport-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch new file mode 100644 index 0000000000..e464452d82 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch @@ -0,0 +1,127 @@ +From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:08 +0200 +Subject: net: dsa: qca8k: add support for sgmii falling edge + +Add support for this in the qca8k driver. Also add support for SGMII +rx/tx clock falling edge. This is only present for pad0, pad5 and +pad6 have these bit reserved from Documentation. Add a comment that this +is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and +setting falling in port0 applies to both configuration with sgmii used +for port0 or port6. + +Co-developed-by: Matthew Hagan +Signed-off-by: Matthew Hagan +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 4 ++++ + 2 files changed, 67 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri + } + + static int ++qca8k_parse_port_config(struct qca8k_priv *priv) ++{ ++ struct device_node *port_dn; ++ phy_interface_t mode; ++ struct dsa_port *dp; ++ int port, ret; ++ ++ /* We have 2 CPU port. Check them */ ++ for (port = 0; port < QCA8K_NUM_PORTS; port++) { ++ /* Skip every other port */ ++ if (port != 0 && port != 6) ++ continue; ++ ++ dp = dsa_to_port(priv->ds, port); ++ port_dn = dp->dn; ++ ++ if (!of_device_is_available(port_dn)) ++ continue; ++ ++ ret = of_get_phy_mode(port_dn, &mode); ++ if (ret) ++ continue; ++ ++ if (mode == PHY_INTERFACE_MODE_SGMII) { ++ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) ++ priv->sgmii_tx_clk_falling_edge = true; ++ ++ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) ++ priv->sgmii_rx_clk_falling_edge = true; ++ } ++ } ++ ++ return 0; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds) + return -EINVAL; + } + ++ /* Parse CPU port config to be later used in phy_link mac_config */ ++ ret = qca8k_parse_port_config(priv); ++ if (ret) ++ return ret; ++ + mutex_init(&priv->reg_mutex); + + /* Start by setting up the register mapping */ +@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); ++ ++ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and ++ * falling edge is set writing in the PORT0 PAD reg ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8327 || ++ priv->switch_id == QCA8K_ID_QCA8337) ++ reg = QCA8K_REG_PORT0_PAD_CTRL; ++ ++ val = 0; ++ ++ /* SGMII Clock phase configuration */ ++ if (priv->sgmii_rx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; ++ ++ if (priv->sgmii_tx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; ++ ++ if (val) ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | ++ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, ++ val); + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -35,6 +35,8 @@ + #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) + #define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 ++#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) ++#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18) + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) +@@ -260,6 +262,8 @@ struct qca8k_priv { + u8 switch_revision; + u8 rgmii_tx_delay; + u8 rgmii_rx_delay; ++ bool sgmii_rx_clk_falling_edge; ++ bool sgmii_tx_clk_falling_edge; + bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; diff --git a/target/linux/generic/backport-5.15/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch b/target/linux/generic/backport-5.15/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch new file mode 100644 index 0000000000..606ac0af3d --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch @@ -0,0 +1,29 @@ +From 731d613338ec6de482053ffa3f71be2325b0f8eb Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:09 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document support for CPU port 6 + +The switch now support CPU port to be set 6 instead of be hardcoded to +0. Document support for it and describe logic selection. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -29,7 +29,11 @@ the mdio MASTER is used as communication + Don't use mixed external and internal mdio-bus configurations, as this is + not supported by the hardware. + +-The CPU port of this switch is always port 0. ++This switch support 2 CPU port. Normally and advised configuration is with ++CPU port set to port 0. It is also possible to set the CPU port to port 6 ++if the device requires it. The driver will configure the switch to the defined ++port. With both CPU port declared the first CPU port is selected as primary ++and the secondary CPU ignored. + + A CPU port node has the following optional node: + diff --git a/target/linux/generic/backport-5.15/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch b/target/linux/generic/backport-5.15/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch new file mode 100644 index 0000000000..320db8fa9f --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch @@ -0,0 +1,153 @@ +From 3fcf734aa482487df83cf8f18608438fcf59127f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:10 +0200 +Subject: net: dsa: qca8k: add support for cpu port 6 + +Currently CPU port is always hardcoded to port 0. This switch have 2 CPU +ports. The original intention of this driver seems to be use the +mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration +where device have connected only the CPU port 6. To skip the +introduction of a new binding, rework the driver to address the +secondary CPU port as primary and drop any reference of hardcoded port. +With configuration of mac06 exchange, just skip the definition of port0 +and define the CPU port as a secondary. The driver will autoconfigure +the switch to use that as the primary CPU port. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 51 ++++++++++++++++++++++++++++++++++--------------- + drivers/net/dsa/qca8k.h | 2 -- + 2 files changed, 36 insertions(+), 17 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -977,6 +977,22 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri + return ret; + } + ++static int qca8k_find_cpu_port(struct dsa_switch *ds) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ ++ /* Find the connected cpu port. Valid port are 0 or 6 */ ++ if (dsa_is_cpu_port(ds, 0)) ++ return 0; ++ ++ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6"); ++ ++ if (dsa_is_cpu_port(ds, 6)) ++ return 6; ++ ++ return -EINVAL; ++} ++ + static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { +@@ -1017,13 +1033,13 @@ static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int ret, i; ++ int cpu_port, ret, i; + u32 mask; + +- /* Make sure that port 0 is the cpu port */ +- if (!dsa_is_cpu_port(ds, 0)) { +- dev_err(priv->dev, "port 0 is not the CPU port"); +- return -EINVAL; ++ cpu_port = qca8k_find_cpu_port(ds); ++ if (cpu_port < 0) { ++ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); ++ return cpu_port; + } + + /* Parse CPU port config to be later used in phy_link mac_config */ +@@ -1065,7 +1081,7 @@ qca8k_setup(struct dsa_switch *ds) + dev_warn(priv->dev, "mib init failed"); + + /* Enable QCA header mode on the cpu port */ +- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT), ++ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); + if (ret) { +@@ -1087,10 +1103,10 @@ qca8k_setup(struct dsa_switch *ds) + + /* Forward all unknown frames to CPU port for Linux processing */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); + if (ret) + return ret; + +@@ -1098,7 +1114,7 @@ qca8k_setup(struct dsa_switch *ds) + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { +- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; +@@ -1110,7 +1126,7 @@ qca8k_setup(struct dsa_switch *ds) + + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, +- BIT(QCA8K_CPU_PORT)); ++ BIT(cpu_port)); + if (ret) + return ret; + +@@ -1616,9 +1632,12 @@ static int + qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int port_mask = BIT(QCA8K_CPU_PORT); ++ int port_mask, cpu_port; + int i, ret; + ++ cpu_port = dsa_to_port(ds, port)->cpu_dp->index; ++ port_mask = BIT(cpu_port); ++ + for (i = 1; i < QCA8K_NUM_PORTS; i++) { + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; +@@ -1645,7 +1664,9 @@ static void + qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int i; ++ int cpu_port, i; ++ ++ cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + + for (i = 1; i < QCA8K_NUM_PORTS; i++) { + if (dsa_to_port(ds, i)->bridge_dev != br) +@@ -1662,7 +1683,7 @@ qca8k_port_bridge_leave(struct dsa_switc + * this port + */ + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), +- QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT)); ++ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); + } + + static int +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -24,8 +24,6 @@ + + #define QCA8K_NUM_FDB_RECORDS 2048 + +-#define QCA8K_CPU_PORT 0 +- + #define QCA8K_PORT_VID_DEF 1 + + /* Global control registers */ diff --git a/target/linux/generic/backport-5.15/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch b/target/linux/generic/backport-5.15/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch new file mode 100644 index 0000000000..de201764f9 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch @@ -0,0 +1,295 @@ +From 5654ec78dd7e64b1e04777b24007344329e6a63b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:11 +0200 +Subject: net: dsa: qca8k: rework rgmii delay logic and scan for cpu port 6 + +Future proof commit. This switch have 2 CPU ports and one valid +configuration is first CPU port set to sgmii and second CPU port set to +rgmii-id. The current implementation detects delay only for CPU port +zero set to rgmii and doesn't count any delay set in a secondary CPU +port. Drop the current delay scan function and move it to the sgmii +parser function to generalize and implicitly add support for secondary +CPU port set to rgmii-id. Introduce new logic where delay is enabled +also with internal delay binding declared and rgmii set as PHY mode. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 165 ++++++++++++++++++++++++------------------------ + drivers/net/dsa/qca8k.h | 10 ++- + 2 files changed, 89 insertions(+), 86 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -889,68 +889,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + } + + static int +-qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv) +-{ +- struct device_node *port_dn; +- phy_interface_t mode; +- struct dsa_port *dp; +- u32 val; +- +- /* CPU port is already checked */ +- dp = dsa_to_port(priv->ds, 0); +- +- port_dn = dp->dn; +- +- /* Check if port 0 is set to the correct type */ +- of_get_phy_mode(port_dn, &mode); +- if (mode != PHY_INTERFACE_MODE_RGMII_ID && +- mode != PHY_INTERFACE_MODE_RGMII_RXID && +- mode != PHY_INTERFACE_MODE_RGMII_TXID) { +- return 0; +- } +- +- switch (mode) { +- case PHY_INTERFACE_MODE_RGMII_ID: +- case PHY_INTERFACE_MODE_RGMII_RXID: +- if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val)) +- val = 2; +- else +- /* Switch regs accept value in ns, convert ps to ns */ +- val = val / 1000; +- +- if (val > QCA8K_MAX_DELAY) { +- dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); +- val = 3; +- } +- +- priv->rgmii_rx_delay = val; +- /* Stop here if we need to check only for rx delay */ +- if (mode != PHY_INTERFACE_MODE_RGMII_ID) +- break; +- +- fallthrough; +- case PHY_INTERFACE_MODE_RGMII_TXID: +- if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val)) +- val = 1; +- else +- /* Switch regs accept value in ns, convert ps to ns */ +- val = val / 1000; +- +- if (val > QCA8K_MAX_DELAY) { +- dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); +- val = 3; +- } +- +- priv->rgmii_tx_delay = val; +- break; +- default: +- return 0; +- } +- +- return 0; +-} +- +-static int + qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) + { + u32 mask = 0; +@@ -996,19 +934,21 @@ static int qca8k_find_cpu_port(struct ds + static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { ++ int port, cpu_port_index = 0, ret; + struct device_node *port_dn; + phy_interface_t mode; + struct dsa_port *dp; +- int port, ret; ++ u32 delay; + + /* We have 2 CPU port. Check them */ +- for (port = 0; port < QCA8K_NUM_PORTS; port++) { ++ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) { + /* Skip every other port */ + if (port != 0 && port != 6) + continue; + + dp = dsa_to_port(priv->ds, port); + port_dn = dp->dn; ++ cpu_port_index++; + + if (!of_device_is_available(port_dn)) + continue; +@@ -1017,12 +957,54 @@ qca8k_parse_port_config(struct qca8k_pri + if (ret) + continue; + +- if (mode == PHY_INTERFACE_MODE_SGMII) { ++ switch (mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ delay = 0; ++ ++ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) ++ /* Switch regs accept value in ns, convert ps to ns */ ++ delay = delay / 1000; ++ else if (mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_TXID) ++ delay = 1; ++ ++ if (delay > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); ++ delay = 3; ++ } ++ ++ priv->rgmii_tx_delay[cpu_port_index] = delay; ++ ++ delay = 0; ++ ++ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) ++ /* Switch regs accept value in ns, convert ps to ns */ ++ delay = delay / 1000; ++ else if (mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_RXID) ++ delay = 2; ++ ++ if (delay > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); ++ delay = 3; ++ } ++ ++ priv->rgmii_rx_delay[cpu_port_index] = delay; ++ ++ break; ++ case PHY_INTERFACE_MODE_SGMII: + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->sgmii_tx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) + priv->sgmii_rx_clk_falling_edge = true; ++ ++ break; ++ default: ++ continue; + } + } + +@@ -1059,10 +1041,6 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- ret = qca8k_setup_of_rgmii_delay(priv); +- if (ret) +- return ret; +- + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; +@@ -1229,8 +1207,8 @@ qca8k_phylink_mac_config(struct dsa_swit + const struct phylink_link_state *state) + { + struct qca8k_priv *priv = ds->priv; +- u32 reg, val; +- int ret; ++ int cpu_port_index, ret; ++ u32 reg, val, delay; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1242,6 +1220,7 @@ qca8k_phylink_mac_config(struct dsa_swit + return; + + reg = QCA8K_REG_PORT0_PAD_CTRL; ++ cpu_port_index = QCA8K_CPU_PORT0; + break; + case 1: + case 2: +@@ -1260,6 +1239,7 @@ qca8k_phylink_mac_config(struct dsa_swit + return; + + reg = QCA8K_REG_PORT6_PAD_CTRL; ++ cpu_port_index = QCA8K_CPU_PORT6; + break; + default: + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); +@@ -1274,23 +1254,40 @@ qca8k_phylink_mac_config(struct dsa_swit + + switch (state->interface) { + case PHY_INTERFACE_MODE_RGMII: +- /* RGMII mode means no delay so don't enable the delay */ +- qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); +- break; + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: +- /* RGMII_ID needs internal delay. This is enabled through +- * PORT5_PAD_CTRL for all ports, rather than individual port +- * registers ++ val = QCA8K_PORT_PAD_RGMII_EN; ++ ++ /* Delay can be declared in 3 different way. ++ * Mode to rgmii and internal-delay standard binding defined ++ * rgmii-id or rgmii-tx/rx phy mode set. ++ * The parse logic set a delay different than 0 only when one ++ * of the 3 different way is used. In all other case delay is ++ * not enabled. With ID or TX/RXID delay is enabled and set ++ * to the default and recommended value. ++ */ ++ if (priv->rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->rgmii_tx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; ++ } ++ ++ if (priv->rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->rgmii_rx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; ++ } ++ ++ /* Set RGMII delay based on the selected values */ ++ qca8k_write(priv, reg, val); ++ ++ /* QCA8337 requires to set rgmii rx delay for all ports. ++ * This is enabled through PORT5_PAD_CTRL for all ports, ++ * rather than individual port registers. + */ +- qca8k_write(priv, reg, +- QCA8K_PORT_PAD_RGMII_EN | +- QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) | +- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); +- /* QCA8337 requires to set rgmii rx delay */ + if (priv->switch_id == QCA8K_ID_QCA8337) + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -13,6 +13,7 @@ + #include + + #define QCA8K_NUM_PORTS 7 ++#define QCA8K_NUM_CPU_PORTS 2 + #define QCA8K_MAX_MTU 9000 + + #define PHY_ID_QCA8327 0x004dd034 +@@ -255,13 +256,18 @@ struct qca8k_match_data { + u8 id; + }; + ++enum { ++ QCA8K_CPU_PORT0, ++ QCA8K_CPU_PORT6, ++}; ++ + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; +- u8 rgmii_tx_delay; +- u8 rgmii_rx_delay; + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; ++ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ ++ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; diff --git a/target/linux/generic/backport-5.15/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch b/target/linux/generic/backport-5.15/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch new file mode 100644 index 0000000000..8abd264e79 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch @@ -0,0 +1,33 @@ +From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:12 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll + +Document qca,sgmii-enable-pll binding used in the CPU nodes to +enable SGMII PLL on MAC config. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -45,6 +45,16 @@ A CPU port node has the following option + Mostly used in qca8327 with CPU port 0 set to + sgmii. + - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. ++- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX ++ chain along with Signal Detection. ++ This should NOT be enabled for qca8327. If enabled with ++ qca8327 the sgmii port won't correctly init and an err ++ is printed. ++ This can be required for qca8337 switch with revision 2. ++ A warning is displayed when used with revision greater ++ 2. ++ With CPU port set to sgmii and qca8337 it is advised ++ to set this unless a communication problem is observed. + + For QCA8K the 'fixed-link' sub-node supports only the following properties: + diff --git a/target/linux/generic/backport-5.15/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch b/target/linux/generic/backport-5.15/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch new file mode 100644 index 0000000000..2b5a84a1b0 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch @@ -0,0 +1,65 @@ +From bbc4799e8bb6c397e3b3fec13de68e179f5db9ff Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:13 +0200 +Subject: net: dsa: qca8k: add explicit SGMII PLL enable + +Support enabling PLL on the SGMII CPU port. Some device require this +special configuration or no traffic is transmitted and the switch +doesn't work at all. A dedicated binding is added to the CPU node +port to apply the correct reg on mac config. +Fail to correctly configure sgmii with qca8327 switch and warn if pll is +used on qca8337 with a revision greater than 1. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 19 +++++++++++++++++-- + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 18 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1002,6 +1002,18 @@ qca8k_parse_port_config(struct qca8k_pri + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) + priv->sgmii_rx_clk_falling_edge = true; + ++ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { ++ priv->sgmii_enable_pll = true; ++ ++ if (priv->switch_id == QCA8K_ID_QCA8327) { ++ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); ++ priv->sgmii_enable_pll = false; ++ } ++ ++ if (priv->switch_revision < 2) ++ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); ++ } ++ + break; + default: + continue; +@@ -1312,8 +1324,11 @@ qca8k_phylink_mac_config(struct dsa_swit + if (ret) + return; + +- val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | +- QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD; ++ val |= QCA8K_SGMII_EN_SD; ++ ++ if (priv->sgmii_enable_pll) ++ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | ++ QCA8K_SGMII_EN_TX; + + if (dsa_is_cpu_port(ds, port)) { + /* CPU port, we're talking to the CPU MAC, be a PHY */ +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -266,6 +266,7 @@ struct qca8k_priv { + u8 switch_revision; + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; ++ bool sgmii_enable_pll; + u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + bool legacy_phy_port_mapping; diff --git a/target/linux/generic/backport-5.15/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch b/target/linux/generic/backport-5.15/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch new file mode 100644 index 0000000000..38dc954e8c --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch @@ -0,0 +1,37 @@ +From 924087c5c3d41553700b0eb83ca2a53b91643dca Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:14 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding + +Document new binding qca,ignore-power-on-sel used to ignore +power on strapping and use sw regs instead. +Document qca,led-open.drain to set led to open drain mode, the +qca,ignore-power-on-sel is mandatory with this enabled or an error will +be reported. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -13,6 +13,17 @@ Required properties: + Optional properties: + + - reset-gpios: GPIO to be used to reset the whole device ++- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open ++ drain or eeprom presence. This is needed for broken ++ devices that have wrong configuration or when the oem ++ decided to not use pin strapping and fallback to sw ++ regs. ++- qca,led-open-drain: Set leds to open-drain mode. This requires the ++ qca,ignore-power-on-sel to be set or the driver will fail ++ to probe. This is needed if the oem doesn't use pin ++ strapping to set this mode and prefers to set it using sw ++ regs. The pin strapping related to led open drain mode is ++ the pin B68 for QCA832x and B49 for QCA833x + + Subnodes: + diff --git a/target/linux/generic/backport-5.15/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch b/target/linux/generic/backport-5.15/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch new file mode 100644 index 0000000000..aa5d92a4fd --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch @@ -0,0 +1,92 @@ +From 362bb238d8bf1470424214a8a5968d9c6cce68fa Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:15 +0200 +Subject: net: dsa: qca8k: add support for pws config reg + +Some qca8327 switch require to force the ignore of power on sel +strapping. Some switch require to set the led open drain mode in regs +instead of using strapping. While most of the device implements this +using the correct way using pin strapping, there are still some broken +device that require to be set using sw regs. +Introduce a new binding and support these special configuration. +As led open drain require to ignore pin strapping to work, the probe +fails with EINVAL error with incorrect configuration. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 39 +++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 6 ++++++ + 2 files changed, 45 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -932,6 +932,41 @@ static int qca8k_find_cpu_port(struct ds + } + + static int ++qca8k_setup_of_pws_reg(struct qca8k_priv *priv) ++{ ++ struct device_node *node = priv->dev->of_node; ++ u32 val = 0; ++ int ret; ++ ++ /* QCA8327 require to set to the correct mode. ++ * His bigger brother QCA8328 have the 172 pin layout. ++ * Should be applied by default but we set this just to make sure. ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8327) { ++ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, ++ QCA8327_PWS_PACKAGE148_EN); ++ if (ret) ++ return ret; ++ } ++ ++ if (of_property_read_bool(node, "qca,ignore-power-on-sel")) ++ val |= QCA8K_PWS_POWER_ON_SEL; ++ ++ if (of_property_read_bool(node, "qca,led-open-drain")) { ++ if (!(val & QCA8K_PWS_POWER_ON_SEL)) { ++ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set."); ++ return -EINVAL; ++ } ++ ++ val |= QCA8K_PWS_LED_OPEN_EN_CSR; ++ } ++ ++ return qca8k_rmw(priv, QCA8K_REG_PWS, ++ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL, ++ val); ++} ++ ++static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { + int port, cpu_port_index = 0, ret; +@@ -1053,6 +1088,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_of_pws_reg(priv); ++ if (ret) ++ return ret; ++ + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -46,6 +46,12 @@ + #define QCA8K_MAX_DELAY 3 + #define QCA8K_PORT_PAD_SGMII_EN BIT(7) + #define QCA8K_REG_PWS 0x010 ++#define QCA8K_PWS_POWER_ON_SEL BIT(31) ++/* This reg is only valid for QCA832x and toggle the package ++ * type from 176 pin (by default) to 148 pin used on QCA8327 ++ */ ++#define QCA8327_PWS_PACKAGE148_EN BIT(30) ++#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24) + #define QCA8K_PWS_SERDES_AEN_DIS BIT(7) + #define QCA8K_REG_MODULE_EN 0x030 + #define QCA8K_MODULE_EN_MIB BIT(0) diff --git a/target/linux/generic/backport-5.15/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch b/target/linux/generic/backport-5.15/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch new file mode 100644 index 0000000000..1bfb00c5b2 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch @@ -0,0 +1,32 @@ +From ed7988d77fbfb79366b68f9e7fa60a6080da23d4 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:16 +0200 +Subject: dt-bindings: net: dsa: qca8k: document support for qca8328 + +QCA8328 is the bigger brother of qca8327. Document the new compatible +binding and add some information to understand the various switch +compatible. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -3,9 +3,10 @@ + Required properties: + + - compatible: should be one of: +- "qca,qca8327" +- "qca,qca8334" +- "qca,qca8337" ++ "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package ++ "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package ++ "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package ++ "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package + + - #size-cells: must be 0 + - #address-cells: must be 1 diff --git a/target/linux/generic/backport-5.15/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch b/target/linux/generic/backport-5.15/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch new file mode 100644 index 0000000000..6e118f5a14 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch @@ -0,0 +1,78 @@ +From f477d1c8bdbef4f400718238e350f16f521d2a3e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:17 +0200 +Subject: net: dsa: qca8k: add support for QCA8328 + +QCA8328 switch is the bigger brother of the qca8327. Same regs different +chip. Change the function to set the correct pin layout and introduce a +new match_data to differentiate the 2 switch as they have the same ID +and their internal PHY have the same ID. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 19 ++++++++++++++++--- + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 17 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -935,6 +935,7 @@ static int + qca8k_setup_of_pws_reg(struct qca8k_priv *priv) + { + struct device_node *node = priv->dev->of_node; ++ const struct qca8k_match_data *data; + u32 val = 0; + int ret; + +@@ -943,8 +944,14 @@ qca8k_setup_of_pws_reg(struct qca8k_priv + * Should be applied by default but we set this just to make sure. + */ + if (priv->switch_id == QCA8K_ID_QCA8327) { ++ data = of_device_get_match_data(priv->dev); ++ ++ /* Set the correct package of 148 pin for QCA8327 */ ++ if (data->reduced_package) ++ val |= QCA8327_PWS_PACKAGE148_EN; ++ + ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, +- QCA8327_PWS_PACKAGE148_EN); ++ val); + if (ret) + return ret; + } +@@ -2098,7 +2105,12 @@ static int qca8k_resume(struct device *d + static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, + qca8k_suspend, qca8k_resume); + +-static const struct qca8k_match_data qca832x = { ++static const struct qca8k_match_data qca8327 = { ++ .id = QCA8K_ID_QCA8327, ++ .reduced_package = true, ++}; ++ ++static const struct qca8k_match_data qca8328 = { + .id = QCA8K_ID_QCA8327, + }; + +@@ -2107,7 +2119,8 @@ static const struct qca8k_match_data qca + }; + + static const struct of_device_id qca8k_of_match[] = { +- { .compatible = "qca,qca8327", .data = &qca832x }, ++ { .compatible = "qca,qca8327", .data = &qca8327 }, ++ { .compatible = "qca,qca8328", .data = &qca8328 }, + { .compatible = "qca,qca8334", .data = &qca833x }, + { .compatible = "qca,qca8337", .data = &qca833x }, + { /* sentinel */ }, +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -260,6 +260,7 @@ struct ar8xxx_port_status { + + struct qca8k_match_data { + u8 id; ++ bool reduced_package; + }; + + enum { diff --git a/target/linux/generic/backport-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch b/target/linux/generic/backport-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch new file mode 100644 index 0000000000..27f94dca02 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch @@ -0,0 +1,159 @@ +From cef08115846e581f80ff99abf7bf218da1840616 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:18 +0200 +Subject: net: dsa: qca8k: set internal delay also for sgmii + +QCA original code report port instability and sa that SGMII also require +to set internal delay. Generalize the rgmii delay function and apply the +advised value if they are not defined in DT. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 88 +++++++++++++++++++++++++++++++++---------------- + drivers/net/dsa/qca8k.h | 2 ++ + 2 files changed, 62 insertions(+), 28 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1004,6 +1004,7 @@ qca8k_parse_port_config(struct qca8k_pri + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_SGMII: + delay = 0; + + if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) +@@ -1036,8 +1037,13 @@ qca8k_parse_port_config(struct qca8k_pri + + priv->rgmii_rx_delay[cpu_port_index] = delay; + +- break; +- case PHY_INTERFACE_MODE_SGMII: ++ /* Skip sgmii parsing for rgmii* mode */ ++ if (mode == PHY_INTERFACE_MODE_RGMII || ++ mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_TXID || ++ mode == PHY_INTERFACE_MODE_RGMII_RXID) ++ break; ++ + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->sgmii_tx_clk_falling_edge = true; + +@@ -1261,12 +1267,53 @@ qca8k_setup(struct dsa_switch *ds) + } + + static void ++qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, ++ u32 reg) ++{ ++ u32 delay, val = 0; ++ int ret; ++ ++ /* Delay can be declared in 3 different way. ++ * Mode to rgmii and internal-delay standard binding defined ++ * rgmii-id or rgmii-tx/rx phy mode set. ++ * The parse logic set a delay different than 0 only when one ++ * of the 3 different way is used. In all other case delay is ++ * not enabled. With ID or TX/RXID delay is enabled and set ++ * to the default and recommended value. ++ */ ++ if (priv->rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->rgmii_tx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; ++ } ++ ++ if (priv->rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->rgmii_rx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; ++ } ++ ++ /* Set RGMII delay based on the selected values */ ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, ++ val); ++ if (ret) ++ dev_err(priv->dev, "Failed to set internal delay for CPU port%d", ++ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); ++} ++ ++static void + qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) + { + struct qca8k_priv *priv = ds->priv; + int cpu_port_index, ret; +- u32 reg, val, delay; ++ u32 reg, val; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1315,32 +1362,10 @@ qca8k_phylink_mac_config(struct dsa_swit + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: +- val = QCA8K_PORT_PAD_RGMII_EN; +- +- /* Delay can be declared in 3 different way. +- * Mode to rgmii and internal-delay standard binding defined +- * rgmii-id or rgmii-tx/rx phy mode set. +- * The parse logic set a delay different than 0 only when one +- * of the 3 different way is used. In all other case delay is +- * not enabled. With ID or TX/RXID delay is enabled and set +- * to the default and recommended value. +- */ +- if (priv->rgmii_tx_delay[cpu_port_index]) { +- delay = priv->rgmii_tx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; +- } +- +- if (priv->rgmii_rx_delay[cpu_port_index]) { +- delay = priv->rgmii_rx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; +- } ++ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); + +- /* Set RGMII delay based on the selected values */ +- qca8k_write(priv, reg, val); ++ /* Configure rgmii delay */ ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + + /* QCA8337 requires to set rgmii rx delay for all ports. + * This is enabled through PORT5_PAD_CTRL for all ports, +@@ -1411,6 +1436,13 @@ qca8k_phylink_mac_config(struct dsa_swit + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); ++ ++ /* From original code is reported port instability as SGMII also ++ * require delay set. Apply advised values here or take them from DT. ++ */ ++ if (state->interface == PHY_INTERFACE_MODE_SGMII) ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); ++ + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -39,7 +39,9 @@ + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22) ++#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) diff --git a/target/linux/generic/backport-5.15/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch b/target/linux/generic/backport-5.15/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch new file mode 100644 index 0000000000..b991798c87 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch @@ -0,0 +1,124 @@ +From fd0bb28c547f7c8affb1691128cece38f5b626a1 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:19 +0200 +Subject: net: dsa: qca8k: move port config to dedicated struct + +Move ports related config to dedicated struct to keep things organized. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 26 +++++++++++++------------- + drivers/net/dsa/qca8k.h | 10 +++++++--- + 2 files changed, 20 insertions(+), 16 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1019,7 +1019,7 @@ qca8k_parse_port_config(struct qca8k_pri + delay = 3; + } + +- priv->rgmii_tx_delay[cpu_port_index] = delay; ++ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay; + + delay = 0; + +@@ -1035,7 +1035,7 @@ qca8k_parse_port_config(struct qca8k_pri + delay = 3; + } + +- priv->rgmii_rx_delay[cpu_port_index] = delay; ++ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay; + + /* Skip sgmii parsing for rgmii* mode */ + if (mode == PHY_INTERFACE_MODE_RGMII || +@@ -1045,17 +1045,17 @@ qca8k_parse_port_config(struct qca8k_pri + break; + + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) +- priv->sgmii_tx_clk_falling_edge = true; ++ priv->ports_config.sgmii_tx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) +- priv->sgmii_rx_clk_falling_edge = true; ++ priv->ports_config.sgmii_rx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { +- priv->sgmii_enable_pll = true; ++ priv->ports_config.sgmii_enable_pll = true; + + if (priv->switch_id == QCA8K_ID_QCA8327) { + dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); +- priv->sgmii_enable_pll = false; ++ priv->ports_config.sgmii_enable_pll = false; + } + + if (priv->switch_revision < 2) +@@ -1281,15 +1281,15 @@ qca8k_mac_config_setup_internal_delay(st + * not enabled. With ID or TX/RXID delay is enabled and set + * to the default and recommended value. + */ +- if (priv->rgmii_tx_delay[cpu_port_index]) { +- delay = priv->rgmii_tx_delay[cpu_port_index]; ++ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; + } + +- if (priv->rgmii_rx_delay[cpu_port_index]) { +- delay = priv->rgmii_rx_delay[cpu_port_index]; ++ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; +@@ -1397,7 +1397,7 @@ qca8k_phylink_mac_config(struct dsa_swit + + val |= QCA8K_SGMII_EN_SD; + +- if (priv->sgmii_enable_pll) ++ if (priv->ports_config.sgmii_enable_pll) + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + +@@ -1425,10 +1425,10 @@ qca8k_phylink_mac_config(struct dsa_swit + val = 0; + + /* SGMII Clock phase configuration */ +- if (priv->sgmii_rx_clk_falling_edge) ++ if (priv->ports_config.sgmii_rx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; + +- if (priv->sgmii_tx_clk_falling_edge) ++ if (priv->ports_config.sgmii_tx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; + + if (val) +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -270,15 +270,19 @@ enum { + QCA8K_CPU_PORT6, + }; + +-struct qca8k_priv { +- u8 switch_id; +- u8 switch_revision; ++struct qca8k_ports_config { + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; + bool sgmii_enable_pll; + u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ ++}; ++ ++struct qca8k_priv { ++ u8 switch_id; ++ u8 switch_revision; + bool legacy_phy_port_mapping; ++ struct qca8k_ports_config ports_config; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.15/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch b/target/linux/generic/backport-5.15/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch new file mode 100644 index 0000000000..f7cb514176 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch @@ -0,0 +1,26 @@ +From e52073a8e3086046a098b8a7cbeb282ff0cdb424 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:20 +0200 +Subject: dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switch + +Fix warning now that we have qca8k switch Documentation using yaml. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml ++++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +@@ -51,6 +51,9 @@ examples: + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; +- /* ... */ ++ ++ ports { ++ /* ... */ ++ }; + }; + }; diff --git a/target/linux/generic/backport-5.15/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch b/target/linux/generic/backport-5.15/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch new file mode 100644 index 0000000000..b9bce97dd3 --- /dev/null +++ b/target/linux/generic/backport-5.15/747-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch @@ -0,0 +1,631 @@ +From d291fbb8245d5ba04979fed85575860a5cea7196 Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Thu, 14 Oct 2021 00:39:21 +0200 +Subject: dt-bindings: net: dsa: qca8k: convert to YAML schema + +Convert the qca8k bindings to YAML format. + +Signed-off-by: Matthew Hagan +Co-developed-by: Ansuel Smith +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + .../devicetree/bindings/net/dsa/qca8k.txt | 245 -------------- + .../devicetree/bindings/net/dsa/qca8k.yaml | 362 +++++++++++++++++++++ + 2 files changed, 362 insertions(+), 245 deletions(-) + delete mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt + create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.yaml + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ /dev/null +@@ -1,245 +0,0 @@ +-* Qualcomm Atheros QCA8xxx switch family +- +-Required properties: +- +-- compatible: should be one of: +- "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package +- "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package +- "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package +- "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package +- +-- #size-cells: must be 0 +-- #address-cells: must be 1 +- +-Optional properties: +- +-- reset-gpios: GPIO to be used to reset the whole device +-- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open +- drain or eeprom presence. This is needed for broken +- devices that have wrong configuration or when the oem +- decided to not use pin strapping and fallback to sw +- regs. +-- qca,led-open-drain: Set leds to open-drain mode. This requires the +- qca,ignore-power-on-sel to be set or the driver will fail +- to probe. This is needed if the oem doesn't use pin +- strapping to set this mode and prefers to set it using sw +- regs. The pin strapping related to led open drain mode is +- the pin B68 for QCA832x and B49 for QCA833x +- +-Subnodes: +- +-The integrated switch subnode should be specified according to the binding +-described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +-mdio-bus each subnode describing a port needs to have a valid phandle +-referencing the internal PHY it is connected to. This is because there's no +-N:N mapping of port and PHY id. +-To declare the internal mdio-bus configuration, declare a mdio node in the +-switch node and declare the phandle for the port referencing the internal +-PHY is connected to. In this config a internal mdio-bus is registered and +-the mdio MASTER is used as communication. +- +-Don't use mixed external and internal mdio-bus configurations, as this is +-not supported by the hardware. +- +-This switch support 2 CPU port. Normally and advised configuration is with +-CPU port set to port 0. It is also possible to set the CPU port to port 6 +-if the device requires it. The driver will configure the switch to the defined +-port. With both CPU port declared the first CPU port is selected as primary +-and the secondary CPU ignored. +- +-A CPU port node has the following optional node: +- +-- fixed-link : Fixed-link subnode describing a link to a non-MDIO +- managed entity. See +- Documentation/devicetree/bindings/net/fixed-link.txt +- for details. +-- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. +- Mostly used in qca8327 with CPU port 0 set to +- sgmii. +-- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. +-- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX +- chain along with Signal Detection. +- This should NOT be enabled for qca8327. If enabled with +- qca8327 the sgmii port won't correctly init and an err +- is printed. +- This can be required for qca8337 switch with revision 2. +- A warning is displayed when used with revision greater +- 2. +- With CPU port set to sgmii and qca8337 it is advised +- to set this unless a communication problem is observed. +- +-For QCA8K the 'fixed-link' sub-node supports only the following properties: +- +-- 'speed' (integer, mandatory), to indicate the link speed. Accepted +- values are 10, 100 and 1000 +-- 'full-duplex' (boolean, optional), to indicate that full duplex is +- used. When absent, half duplex is assumed. +- +-Examples: +- +-for the external mdio-bus configuration: +- +- &mdio0 { +- phy_port1: phy@0 { +- reg = <0>; +- }; +- +- phy_port2: phy@1 { +- reg = <1>; +- }; +- +- phy_port3: phy@2 { +- reg = <2>; +- }; +- +- phy_port4: phy@3 { +- reg = <3>; +- }; +- +- phy_port5: phy@4 { +- reg = <4>; +- }; +- +- switch@10 { +- compatible = "qca,qca8337"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +- reg = <0x10>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- port@0 { +- reg = <0>; +- label = "cpu"; +- ethernet = <&gmac1>; +- phy-mode = "rgmii"; +- fixed-link { +- speed = 1000; +- full-duplex; +- }; +- }; +- +- port@1 { +- reg = <1>; +- label = "lan1"; +- phy-handle = <&phy_port1>; +- }; +- +- port@2 { +- reg = <2>; +- label = "lan2"; +- phy-handle = <&phy_port2>; +- }; +- +- port@3 { +- reg = <3>; +- label = "lan3"; +- phy-handle = <&phy_port3>; +- }; +- +- port@4 { +- reg = <4>; +- label = "lan4"; +- phy-handle = <&phy_port4>; +- }; +- +- port@5 { +- reg = <5>; +- label = "wan"; +- phy-handle = <&phy_port5>; +- }; +- }; +- }; +- }; +- +-for the internal master mdio-bus configuration: +- +- &mdio0 { +- switch@10 { +- compatible = "qca,qca8337"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +- reg = <0x10>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- label = "cpu"; +- ethernet = <&gmac1>; +- phy-mode = "rgmii"; +- fixed-link { +- speed = 1000; +- full-duplex; +- }; +- }; +- +- port@1 { +- reg = <1>; +- label = "lan1"; +- phy-mode = "internal"; +- phy-handle = <&phy_port1>; +- }; +- +- port@2 { +- reg = <2>; +- label = "lan2"; +- phy-mode = "internal"; +- phy-handle = <&phy_port2>; +- }; +- +- port@3 { +- reg = <3>; +- label = "lan3"; +- phy-mode = "internal"; +- phy-handle = <&phy_port3>; +- }; +- +- port@4 { +- reg = <4>; +- label = "lan4"; +- phy-mode = "internal"; +- phy-handle = <&phy_port4>; +- }; +- +- port@5 { +- reg = <5>; +- label = "wan"; +- phy-mode = "internal"; +- phy-handle = <&phy_port5>; +- }; +- }; +- +- mdio { +- #address-cells = <1>; +- #size-cells = <0>; +- +- phy_port1: phy@0 { +- reg = <0>; +- }; +- +- phy_port2: phy@1 { +- reg = <1>; +- }; +- +- phy_port3: phy@2 { +- reg = <2>; +- }; +- +- phy_port4: phy@3 { +- reg = <3>; +- }; +- +- phy_port5: phy@4 { +- reg = <4>; +- }; +- }; +- }; +- }; +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +@@ -0,0 +1,362 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Qualcomm Atheros QCA83xx switch family ++ ++maintainers: ++ - John Crispin ++ ++description: ++ If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode ++ describing a port needs to have a valid phandle referencing the internal PHY ++ it is connected to. This is because there is no N:N mapping of port and PHY ++ ID. To declare the internal mdio-bus configuration, declare an MDIO node in ++ the switch node and declare the phandle for the port, referencing the internal ++ PHY it is connected to. In this config, an internal mdio-bus is registered and ++ the MDIO master is used for communication. Mixed external and internal ++ mdio-bus configurations are not supported by the hardware. ++ ++properties: ++ compatible: ++ oneOf: ++ - enum: ++ - qca,qca8327 ++ - qca,qca8328 ++ - qca,qca8334 ++ - qca,qca8337 ++ description: | ++ qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package ++ qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package ++ qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package ++ qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package ++ ++ reg: ++ maxItems: 1 ++ ++ reset-gpios: ++ description: ++ GPIO to be used to reset the whole device ++ maxItems: 1 ++ ++ qca,ignore-power-on-sel: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Ignore power-on pin strapping to configure LED open-drain or EEPROM ++ presence. This is needed for devices with incorrect configuration or when ++ the OEM has decided not to use pin strapping and falls back to SW regs. ++ ++ qca,led-open-drain: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to ++ be set, otherwise the driver will fail at probe. This is required if the ++ OEM does not use pin strapping to set this mode and prefers to set it ++ using SW regs. The pin strappings related to LED open-drain mode are ++ B68 on the QCA832x and B49 on the QCA833x. ++ ++ mdio: ++ type: object ++ description: Qca8k switch have an internal mdio to access switch port. ++ If this is not present, the legacy mapping is used and the ++ internal mdio access is used. ++ With the legacy mapping the reg corresponding to the internal ++ mdio is the switch reg with an offset of -1. ++ ++ properties: ++ '#address-cells': ++ const: 1 ++ '#size-cells': ++ const: 0 ++ ++ patternProperties: ++ "^(ethernet-)?phy@[0-4]$": ++ type: object ++ ++ allOf: ++ - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" ++ ++ properties: ++ reg: ++ maxItems: 1 ++ ++ required: ++ - reg ++ ++patternProperties: ++ "^(ethernet-)?ports$": ++ type: object ++ properties: ++ '#address-cells': ++ const: 1 ++ '#size-cells': ++ const: 0 ++ ++ patternProperties: ++ "^(ethernet-)?port@[0-6]$": ++ type: object ++ description: Ethernet switch ports ++ ++ properties: ++ reg: ++ description: Port number ++ ++ label: ++ description: ++ Describes the label associated with this port, which will become ++ the netdev name ++ $ref: /schemas/types.yaml#/definitions/string ++ ++ link: ++ description: ++ Should be a list of phandles to other switch's DSA port. This ++ port is used as the outgoing port towards the phandle ports. The ++ full routing information must be given, not just the one hop ++ routes to neighbouring switches ++ $ref: /schemas/types.yaml#/definitions/phandle-array ++ ++ ethernet: ++ description: ++ Should be a phandle to a valid Ethernet device node. This host ++ device is what the switch port is connected to ++ $ref: /schemas/types.yaml#/definitions/phandle ++ ++ phy-handle: true ++ ++ phy-mode: true ++ ++ fixed-link: true ++ ++ mac-address: true ++ ++ sfp: true ++ ++ qca,sgmii-rxclk-falling-edge: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set the receive clock phase to falling edge. Mostly commonly used on ++ the QCA8327 with CPU port 0 set to SGMII. ++ ++ qca,sgmii-txclk-falling-edge: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set the transmit clock phase to falling edge. ++ ++ qca,sgmii-enable-pll: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ For SGMII CPU port, explicitly enable PLL, TX and RX chain along with ++ Signal Detection. On the QCA8327 this should not be enabled, otherwise ++ the SGMII port will not initialize. When used on the QCA8337, revision 3 ++ or greater, a warning will be displayed. When the CPU port is set to ++ SGMII on the QCA8337, it is advised to set this unless a communication ++ issue is observed. ++ ++ required: ++ - reg ++ ++ additionalProperties: false ++ ++oneOf: ++ - required: ++ - ports ++ - required: ++ - ethernet-ports ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: true ++ ++examples: ++ - | ++ #include ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ external_phy_port1: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ external_phy_port2: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ external_phy_port3: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ external_phy_port4: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ external_phy_port5: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ ++ switch@10 { ++ compatible = "qca,qca8337"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; ++ reg = <0x10>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ phy-handle = <&external_phy_port1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ phy-handle = <&external_phy_port2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan3"; ++ phy-handle = <&external_phy_port3>; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan4"; ++ phy-handle = <&external_phy_port4>; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "wan"; ++ phy-handle = <&external_phy_port5>; ++ }; ++ }; ++ }; ++ }; ++ - | ++ #include ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ switch@10 { ++ compatible = "qca,qca8337"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; ++ reg = <0x10>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan3"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port3>; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan4"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port4>; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "wan"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port5>; ++ }; ++ ++ port@6 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "sgmii"; ++ ++ qca,sgmii-rxclk-falling-edge; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ internal_phy_port1: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ internal_phy_port2: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ internal_phy_port3: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ internal_phy_port4: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ internal_phy_port5: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ }; ++ }; ++ }; diff --git a/target/linux/generic/backport-5.15/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch b/target/linux/generic/backport-5.15/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch new file mode 100644 index 0000000000..a510cfdc18 --- /dev/null +++ b/target/linux/generic/backport-5.15/748-v5.16-net-dsa-qca8k-fix-delay-applied-to-wrong-cpu-in-parse-p.patch @@ -0,0 +1,28 @@ +From 06dd34a628ae5b6a839b757e746de165d6789ca8 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 17 Oct 2021 16:56:46 +0200 +Subject: net: dsa: qca8k: fix delay applied to wrong cpu in parse_port_config + +Fix delay settings applied to wrong cpu in parse_port_config. The delay +values is set to the wrong index as the cpu_port_index is incremented +too early. Start the cpu_port_index to -1 so the correct value is +applied to address also the case with invalid phy mode and not available +port. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -976,7 +976,7 @@ qca8k_setup_of_pws_reg(struct qca8k_priv + static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { +- int port, cpu_port_index = 0, ret; ++ int port, cpu_port_index = -1, ret; + struct device_node *port_dn; + phy_interface_t mode; + struct dsa_port *dp; diff --git a/target/linux/generic/backport-5.15/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch b/target/linux/generic/backport-5.15/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch new file mode 100644 index 0000000000..71fa3022d5 --- /dev/null +++ b/target/linux/generic/backport-5.15/749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch @@ -0,0 +1,151 @@ +From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 19 Oct 2021 02:08:50 +0200 +Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check + +Tidy and organize qca8k setup function from multiple for loop. +Change for loop in bridge leave/join to scan all port and skip cpu port. +No functional change intended. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++-------------------- + 1 file changed, 44 insertions(+), 30 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + dev_warn(priv->dev, "mib init failed"); + +- /* Enable QCA header mode on the cpu port */ +- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); +- if (ret) { +- dev_err(priv->dev, "failed enabling QCA header mode"); +- return ret; +- } +- +- /* Disable forwarding by default on all ports */ ++ /* Initial setup of all ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ /* Disable forwarding by default on all ports */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, 0); + if (ret) + return ret; +- } + +- /* Disable MAC by default on all ports */ +- for (i = 1; i < QCA8K_NUM_PORTS; i++) +- qca8k_port_set_status(priv, i, 0); ++ /* Enable QCA header mode on all cpu ports */ ++ if (dsa_is_cpu_port(ds, i)) { ++ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); ++ if (ret) { ++ dev_err(priv->dev, "failed enabling QCA header mode"); ++ return ret; ++ } ++ } ++ ++ /* Disable MAC by default on all user ports */ ++ if (dsa_is_user_port(ds, i)) ++ qca8k_port_set_status(priv, i, 0); ++ } + +- /* Forward all unknown frames to CPU port for Linux processing */ ++ /* Forward all unknown frames to CPU port for Linux processing ++ * Notice that in multi-cpu config only one port should be set ++ * for igmp, unknown, multicast and broadcast packet ++ */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, + BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | + BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- /* Setup connection between CPU port & user ports */ ++ /* Setup connection between CPU port & user ports ++ * Configure specific switch configuration for ports ++ */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { +- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; +@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + } +- } + +- /* The port 5 of the qca8337 have some problem in flood condition. The +- * original legacy driver had some specific buffer and priority settings +- * for the different port suggested by the QCA switch team. Add this +- * missing settings to improve switch stability under load condition. +- * This problem is limited to qca8337 and other qca8k switch are not affected. +- */ +- if (priv->switch_id == QCA8K_ID_QCA8337) { +- for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ /* The port 5 of the qca8337 have some problem in flood condition. The ++ * original legacy driver had some specific buffer and priority settings ++ * for the different port suggested by the QCA switch team. Add this ++ * missing settings to improve switch stability under load condition. ++ * This problem is limited to qca8337 and other qca8k switch are not affected. ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8337) { + switch (i) { + /* The 2 CPU port and port 5 requires some different + * priority than any other ports. +@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds) + QCA8K_PORT_HOL_CTRL1_WRED_EN, + mask); + } ++ ++ /* Set initial MTU for every port. ++ * We have only have a general MTU setting. So track ++ * every port and set the max across all port. ++ */ ++ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; + } + + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ +@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds) + } + + /* Setup our port MTUs to match power on defaults */ +- for (i = 0; i < QCA8K_NUM_PORTS; i++) +- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; + ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); + if (ret) + dev_warn(priv->dev, "failed setting MTU settings"); +@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch + cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + port_mask = BIT(cpu_port); + +- for (i = 1; i < QCA8K_NUM_PORTS; i++) { ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ if (dsa_is_cpu_port(ds, i)) ++ continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + /* Add this port to the portvlan mask of the other ports +@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switc + + cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + +- for (i = 1; i < QCA8K_NUM_PORTS; i++) { ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ if (dsa_is_cpu_port(ds, i)) ++ continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + /* Remove this port to the portvlan mask of the other ports diff --git a/target/linux/generic/backport-5.15/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch b/target/linux/generic/backport-5.15/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch new file mode 100644 index 0000000000..4a61703c52 --- /dev/null +++ b/target/linux/generic/backport-5.15/750-v5.16-net-dsa-qca8k-make-sure-pad0-mac06-exchange-is-disabled.patch @@ -0,0 +1,47 @@ +From 5f15d392dcb4aa250a63d6f2c5adfc26c0aedc78 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 2 Nov 2021 19:30:41 +0100 +Subject: net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled + +Some device set MAC06 exchange in the bootloader. This cause some +problem as we don't support this strange mode and we just set the port6 +as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6 +instead of port0. Add an extra check and explicitly disable MAC06 exchange +to correctly configure the port PAD config. + +Signed-off-by: Ansuel Smith +Fixes: 3fcf734aa482 ("net: dsa: qca8k: add support for cpu port 6") +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 8 ++++++++ + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 9 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1109,6 +1109,14 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ /* Make sure MAC06 is disabled */ ++ ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL, ++ QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); ++ if (ret) { ++ dev_err(priv->dev, "failed disabling MAC06 exchange"); ++ return ret; ++ } ++ + /* Enable CPU Port */ + ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -34,6 +34,7 @@ + #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) + #define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 ++#define QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN BIT(31) + #define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) + #define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18) + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 diff --git a/target/linux/generic/backport-5.15/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch b/target/linux/generic/backport-5.15/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch new file mode 100644 index 0000000000..df9518d86c --- /dev/null +++ b/target/linux/generic/backport-5.15/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch @@ -0,0 +1,48 @@ +From 3b00a07c2443745d62babfe08dbb2ad8e649526e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 19 Nov 2021 03:03:49 +0100 +Subject: [PATCH] net: dsa: qca8k: fix internal delay applied to the wrong PAD + config + +With SGMII phy the internal delay is always applied to the PAD0 config. +This is caused by the falling edge configuration that hardcode the reg +to PAD0 (as the falling edge bits are present only in PAD0 reg) +Move the delay configuration before the reg overwrite to correctly apply +the delay. + +Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii") +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1433,6 +1433,12 @@ qca8k_phylink_mac_config(struct dsa_swit + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); + ++ /* From original code is reported port instability as SGMII also ++ * require delay set. Apply advised values here or take them from DT. ++ */ ++ if (state->interface == PHY_INTERFACE_MODE_SGMII) ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); ++ + /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and + * falling edge is set writing in the PORT0 PAD reg + */ +@@ -1455,12 +1461,6 @@ qca8k_phylink_mac_config(struct dsa_swit + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); + +- /* From original code is reported port instability as SGMII also +- * require delay set. Apply advised values here or take them from DT. +- */ +- if (state->interface == PHY_INTERFACE_MODE_SGMII) +- qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); +- + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", diff --git a/target/linux/generic/backport-5.15/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch b/target/linux/generic/backport-5.15/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch new file mode 100644 index 0000000000..7348d93ec4 --- /dev/null +++ b/target/linux/generic/backport-5.15/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch @@ -0,0 +1,46 @@ +From 65258b9d8cde45689bdc86ca39b50f01f983733b Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Nov 2021 03:03:50 +0100 +Subject: [PATCH] net: dsa: qca8k: fix MTU calculation + +qca8k has a global MTU, so its tracking the MTU per port to make sure +that the largest MTU gets applied. +Since it uses the frame size instead of MTU the driver MTU change function +will then add the size of Ethernet header and checksum on top of MTU. + +The driver currently populates the per port MTU size as Ethernet frame +length + checksum which equals 1518. + +The issue is that then MTU change function will go through all of the +ports, find the largest MTU and apply the Ethernet header + checksum on +top of it again, so for a desired MTU of 1500 you will end up with 1536. + +This is obviously incorrect, so to correct it populate the per port struct +MTU with just the MTU and not include the Ethernet header + checksum size +as those will be added by the MTU change function. + +Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks") +Signed-off-by: Robert Marko +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1256,8 +1256,12 @@ qca8k_setup(struct dsa_switch *ds) + /* Set initial MTU for every port. + * We have only have a general MTU setting. So track + * every port and set the max across all port. ++ * Set per port MTU to 1500 as the MTU change function ++ * will add the overhead and if its set to 1518 then it ++ * will apply the overhead again and we will end up with ++ * MTU of 1536 instead of 1518 + */ +- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; ++ priv->port_mtu[i] = ETH_DATA_LEN; + } + + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ diff --git a/target/linux/generic/backport-5.15/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch b/target/linux/generic/backport-5.15/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch new file mode 100644 index 0000000000..f477b1b929 --- /dev/null +++ b/target/linux/generic/backport-5.15/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch @@ -0,0 +1,29 @@ +From b9133f3ef5a2659730cf47a74bd0a9259f1cf8ff Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:40 +0100 +Subject: net: dsa: qca8k: remove redundant check in parse_port_config + +The very next check for port 0 and 6 already makes sure we don't go out +of bounds with the ports_config delay table. +Remove the redundant check. + +Reported-by: kernel test robot +Reported-by: Dan Carpenter +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -983,7 +983,7 @@ qca8k_parse_port_config(struct qca8k_pri + u32 delay; + + /* We have 2 CPU port. Check them */ +- for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) { ++ for (port = 0; port < QCA8K_NUM_PORTS; port++) { + /* Skip every other port */ + if (port != 0 && port != 6) + continue; diff --git a/target/linux/generic/backport-5.15/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch b/target/linux/generic/backport-5.15/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch new file mode 100644 index 0000000000..c1489fd9a8 --- /dev/null +++ b/target/linux/generic/backport-5.15/754-net-next-net-dsa-qca8k-convert-to-GENMASK_FIELD_PREP_FIELD_GET.patch @@ -0,0 +1,508 @@ +From 90ae68bfc2ffcb54a4ba4f64edbeb84a80cbb57c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:41 +0100 +Subject: net: dsa: qca8k: convert to GENMASK/FIELD_PREP/FIELD_GET + +Convert and try to standardize bit fields using +GENMASK/FIELD_PREP/FIELD_GET macros. Rework some logic to support the +standard macro and tidy things up. No functional change intended. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 98 +++++++++++++++---------------- + drivers/net/dsa/qca8k.h | 153 ++++++++++++++++++++++++++---------------------- + 2 files changed, 130 insertions(+), 121 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -319,18 +320,18 @@ qca8k_fdb_read(struct qca8k_priv *priv, + } + + /* vid - 83:72 */ +- fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M; ++ fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]); + /* aging - 67:64 */ +- fdb->aging = reg[2] & QCA8K_ATU_STATUS_M; ++ fdb->aging = FIELD_GET(QCA8K_ATU_STATUS_MASK, reg[2]); + /* portmask - 54:48 */ +- fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M; ++ fdb->port_mask = FIELD_GET(QCA8K_ATU_PORT_MASK, reg[1]); + /* mac - 47:0 */ +- fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff; +- fdb->mac[1] = reg[1] & 0xff; +- fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff; +- fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff; +- fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff; +- fdb->mac[5] = reg[0] & 0xff; ++ fdb->mac[0] = FIELD_GET(QCA8K_ATU_ADDR0_MASK, reg[1]); ++ fdb->mac[1] = FIELD_GET(QCA8K_ATU_ADDR1_MASK, reg[1]); ++ fdb->mac[2] = FIELD_GET(QCA8K_ATU_ADDR2_MASK, reg[0]); ++ fdb->mac[3] = FIELD_GET(QCA8K_ATU_ADDR3_MASK, reg[0]); ++ fdb->mac[4] = FIELD_GET(QCA8K_ATU_ADDR4_MASK, reg[0]); ++ fdb->mac[5] = FIELD_GET(QCA8K_ATU_ADDR5_MASK, reg[0]); + + return 0; + } +@@ -343,18 +344,18 @@ qca8k_fdb_write(struct qca8k_priv *priv, + int i; + + /* vid - 83:72 */ +- reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S; ++ reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid); + /* aging - 67:64 */ +- reg[2] |= aging & QCA8K_ATU_STATUS_M; ++ reg[2] |= FIELD_PREP(QCA8K_ATU_STATUS_MASK, aging); + /* portmask - 54:48 */ +- reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S; ++ reg[1] = FIELD_PREP(QCA8K_ATU_PORT_MASK, port_mask); + /* mac - 47:0 */ +- reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S; +- reg[1] |= mac[1]; +- reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S; +- reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S; +- reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S; +- reg[0] |= mac[5]; ++ reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR0_MASK, mac[0]); ++ reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR1_MASK, mac[1]); ++ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR2_MASK, mac[2]); ++ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR3_MASK, mac[3]); ++ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR4_MASK, mac[4]); ++ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]); + + /* load the array into the ARL table */ + for (i = 0; i < 3; i++) +@@ -372,7 +373,7 @@ qca8k_fdb_access(struct qca8k_priv *priv + reg |= cmd; + if (port >= 0) { + reg |= QCA8K_ATU_FUNC_PORT_EN; +- reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S; ++ reg |= FIELD_PREP(QCA8K_ATU_FUNC_PORT_MASK, port); + } + + /* Write the function register triggering the table access */ +@@ -454,7 +455,7 @@ qca8k_vlan_access(struct qca8k_priv *pri + /* Set the command and VLAN index */ + reg = QCA8K_VTU_FUNC1_BUSY; + reg |= cmd; +- reg |= vid << QCA8K_VTU_FUNC1_VID_S; ++ reg |= FIELD_PREP(QCA8K_VTU_FUNC1_VID_MASK, vid); + + /* Write the function register triggering the table access */ + ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg); +@@ -500,13 +501,11 @@ qca8k_vlan_add(struct qca8k_priv *priv, + if (ret < 0) + goto out; + reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN; +- reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port)); ++ reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port); + if (untagged) +- reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG << +- QCA8K_VTU_FUNC0_EG_MODE_S(port); ++ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(port); + else +- reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG << +- QCA8K_VTU_FUNC0_EG_MODE_S(port); ++ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(port); + + ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); + if (ret) +@@ -534,15 +533,13 @@ qca8k_vlan_del(struct qca8k_priv *priv, + ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®); + if (ret < 0) + goto out; +- reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port)); +- reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT << +- QCA8K_VTU_FUNC0_EG_MODE_S(port); ++ reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port); ++ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(port); + + /* Check if we're the last member to be removed */ + del = true; + for (i = 0; i < QCA8K_NUM_PORTS; i++) { +- mask = QCA8K_VTU_FUNC0_EG_MODE_NOT; +- mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i); ++ mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i); + + if ((reg & mask) != mask) { + del = false; +@@ -1014,7 +1011,7 @@ qca8k_parse_port_config(struct qca8k_pri + mode == PHY_INTERFACE_MODE_RGMII_TXID) + delay = 1; + +- if (delay > QCA8K_MAX_DELAY) { ++ if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) { + dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); + delay = 3; + } +@@ -1030,7 +1027,7 @@ qca8k_parse_port_config(struct qca8k_pri + mode == PHY_INTERFACE_MODE_RGMII_RXID) + delay = 2; + +- if (delay > QCA8K_MAX_DELAY) { ++ if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) { + dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); + delay = 3; + } +@@ -1141,8 +1138,8 @@ qca8k_setup(struct dsa_switch *ds) + /* Enable QCA header mode on all cpu ports */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); ++ FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | ++ FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode"); + return ret; +@@ -1159,10 +1156,10 @@ qca8k_setup(struct dsa_switch *ds) + * for igmp, unknown, multicast and broadcast packet + */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, +- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | +- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | +- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); ++ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | ++ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | ++ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | ++ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); + if (ret) + return ret; + +@@ -1180,8 +1177,6 @@ qca8k_setup(struct dsa_switch *ds) + + /* Individual user ports get connected to CPU port only */ + if (dsa_is_user_port(ds, i)) { +- int shift = 16 * (i % 2); +- + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, + BIT(cpu_port)); +@@ -1198,8 +1193,8 @@ qca8k_setup(struct dsa_switch *ds) + * default egress vid + */ + ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), +- 0xfff << shift, +- QCA8K_PORT_VID_DEF << shift); ++ QCA8K_EGREES_VLAN_PORT_MASK(i), ++ QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + +@@ -1246,7 +1241,7 @@ qca8k_setup(struct dsa_switch *ds) + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN; + qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i), +- QCA8K_PORT_HOL_CTRL1_ING_BUF | ++ QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | + QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN, +@@ -1269,8 +1264,8 @@ qca8k_setup(struct dsa_switch *ds) + mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | + QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); + qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, +- QCA8K_GLOBAL_FC_GOL_XON_THRES_S | +- QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S, ++ QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | ++ QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, + mask); + } + +@@ -1918,11 +1913,11 @@ qca8k_port_vlan_filtering(struct dsa_swi + + if (vlan_filtering) { + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), +- QCA8K_PORT_LOOKUP_VLAN_MODE, ++ QCA8K_PORT_LOOKUP_VLAN_MODE_MASK, + QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE); + } else { + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), +- QCA8K_PORT_LOOKUP_VLAN_MODE, ++ QCA8K_PORT_LOOKUP_VLAN_MODE_MASK, + QCA8K_PORT_LOOKUP_VLAN_MODE_NONE); + } + +@@ -1953,11 +1948,9 @@ qca8k_port_vlan_add(struct dsa_switch *d + dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret); + + if (pvid) { +- int shift = 16 * (port % 2); +- + qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), +- 0xfff << shift, +- vlan->vid_end << shift); ++ QCA8K_EGREES_VLAN_PORT_MASK(port), ++ QCA8K_EGREES_VLAN_PORT(port, vlan->vid_end)); + qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), + QCA8K_PORT_VLAN_CVID(vlan->vid_end) | + QCA8K_PORT_VLAN_SVID(vlan->vid_end)); +@@ -2050,7 +2043,7 @@ static int qca8k_read_switch_id(struct q + if (ret < 0) + return -ENODEV; + +- id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK); ++ id = QCA8K_MASK_CTRL_DEVICE_ID(val); + if (id != data->id) { + dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id); + return -ENODEV; +@@ -2059,7 +2052,7 @@ static int qca8k_read_switch_id(struct q + priv->switch_id = id; + + /* Save revision to communicate to the internal PHY driver */ +- priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK); ++ priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val); + + return 0; + } +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -30,9 +30,9 @@ + /* Global control registers */ + #define QCA8K_REG_MASK_CTRL 0x000 + #define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0) +-#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0) ++#define QCA8K_MASK_CTRL_REV_ID(x) FIELD_GET(QCA8K_MASK_CTRL_REV_ID_MASK, x) + #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) +-#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) ++#define QCA8K_MASK_CTRL_DEVICE_ID(x) FIELD_GET(QCA8K_MASK_CTRL_DEVICE_ID_MASK, x) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 + #define QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN BIT(31) + #define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) +@@ -41,12 +41,11 @@ + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22) +-#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22) ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) FIELD_PREP(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, x) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20) +-#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20) ++#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) FIELD_PREP(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, x) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) +-#define QCA8K_MAX_DELAY 3 + #define QCA8K_PORT_PAD_SGMII_EN BIT(7) + #define QCA8K_REG_PWS 0x010 + #define QCA8K_PWS_POWER_ON_SEL BIT(31) +@@ -68,10 +67,12 @@ + #define QCA8K_MDIO_MASTER_READ BIT(27) + #define QCA8K_MDIO_MASTER_WRITE 0 + #define QCA8K_MDIO_MASTER_SUP_PRE BIT(26) +-#define QCA8K_MDIO_MASTER_PHY_ADDR(x) ((x) << 21) +-#define QCA8K_MDIO_MASTER_REG_ADDR(x) ((x) << 16) +-#define QCA8K_MDIO_MASTER_DATA(x) (x) ++#define QCA8K_MDIO_MASTER_PHY_ADDR_MASK GENMASK(25, 21) ++#define QCA8K_MDIO_MASTER_PHY_ADDR(x) FIELD_PREP(QCA8K_MDIO_MASTER_PHY_ADDR_MASK, x) ++#define QCA8K_MDIO_MASTER_REG_ADDR_MASK GENMASK(20, 16) ++#define QCA8K_MDIO_MASTER_REG_ADDR(x) FIELD_PREP(QCA8K_MDIO_MASTER_REG_ADDR_MASK, x) + #define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0) ++#define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x) + #define QCA8K_MDIO_MASTER_MAX_PORTS 5 + #define QCA8K_MDIO_MASTER_MAX_REG 32 + #define QCA8K_GOL_MAC_ADDR0 0x60 +@@ -93,9 +94,7 @@ + #define QCA8K_PORT_STATUS_FLOW_AUTO BIT(12) + #define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4)) + #define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2) +-#define QCA8K_PORT_HDR_CTRL_RX_S 2 + #define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0) +-#define QCA8K_PORT_HDR_CTRL_TX_S 0 + #define QCA8K_PORT_HDR_CTRL_ALL 2 + #define QCA8K_PORT_HDR_CTRL_MGMT 1 + #define QCA8K_PORT_HDR_CTRL_NONE 0 +@@ -105,10 +104,11 @@ + #define QCA8K_SGMII_EN_TX BIT(3) + #define QCA8K_SGMII_EN_SD BIT(4) + #define QCA8K_SGMII_CLK125M_DELAY BIT(7) +-#define QCA8K_SGMII_MODE_CTRL_MASK (BIT(22) | BIT(23)) +-#define QCA8K_SGMII_MODE_CTRL_BASEX (0 << 22) +-#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22) +-#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22) ++#define QCA8K_SGMII_MODE_CTRL_MASK GENMASK(23, 22) ++#define QCA8K_SGMII_MODE_CTRL(x) FIELD_PREP(QCA8K_SGMII_MODE_CTRL_MASK, x) ++#define QCA8K_SGMII_MODE_CTRL_BASEX QCA8K_SGMII_MODE_CTRL(0x0) ++#define QCA8K_SGMII_MODE_CTRL_PHY QCA8K_SGMII_MODE_CTRL(0x1) ++#define QCA8K_SGMII_MODE_CTRL_MAC QCA8K_SGMII_MODE_CTRL(0x2) + + /* MAC_PWR_SEL registers */ + #define QCA8K_REG_MAC_PWR_SEL 0x0e4 +@@ -121,100 +121,115 @@ + + /* ACL registers */ + #define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8)) +-#define QCA8K_PORT_VLAN_CVID(x) (x << 16) +-#define QCA8K_PORT_VLAN_SVID(x) x ++#define QCA8K_PORT_VLAN_CVID_MASK GENMASK(27, 16) ++#define QCA8K_PORT_VLAN_CVID(x) FIELD_PREP(QCA8K_PORT_VLAN_CVID_MASK, x) ++#define QCA8K_PORT_VLAN_SVID_MASK GENMASK(11, 0) ++#define QCA8K_PORT_VLAN_SVID(x) FIELD_PREP(QCA8K_PORT_VLAN_SVID_MASK, x) + #define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8)) + #define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470 + #define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474 + + /* Lookup registers */ + #define QCA8K_REG_ATU_DATA0 0x600 +-#define QCA8K_ATU_ADDR2_S 24 +-#define QCA8K_ATU_ADDR3_S 16 +-#define QCA8K_ATU_ADDR4_S 8 ++#define QCA8K_ATU_ADDR2_MASK GENMASK(31, 24) ++#define QCA8K_ATU_ADDR3_MASK GENMASK(23, 16) ++#define QCA8K_ATU_ADDR4_MASK GENMASK(15, 8) ++#define QCA8K_ATU_ADDR5_MASK GENMASK(7, 0) + #define QCA8K_REG_ATU_DATA1 0x604 +-#define QCA8K_ATU_PORT_M 0x7f +-#define QCA8K_ATU_PORT_S 16 +-#define QCA8K_ATU_ADDR0_S 8 ++#define QCA8K_ATU_PORT_MASK GENMASK(22, 16) ++#define QCA8K_ATU_ADDR0_MASK GENMASK(15, 8) ++#define QCA8K_ATU_ADDR1_MASK GENMASK(7, 0) + #define QCA8K_REG_ATU_DATA2 0x608 +-#define QCA8K_ATU_VID_M 0xfff +-#define QCA8K_ATU_VID_S 8 +-#define QCA8K_ATU_STATUS_M 0xf ++#define QCA8K_ATU_VID_MASK GENMASK(19, 8) ++#define QCA8K_ATU_STATUS_MASK GENMASK(3, 0) + #define QCA8K_ATU_STATUS_STATIC 0xf + #define QCA8K_REG_ATU_FUNC 0x60c + #define QCA8K_ATU_FUNC_BUSY BIT(31) + #define QCA8K_ATU_FUNC_PORT_EN BIT(14) + #define QCA8K_ATU_FUNC_MULTI_EN BIT(13) + #define QCA8K_ATU_FUNC_FULL BIT(12) +-#define QCA8K_ATU_FUNC_PORT_M 0xf +-#define QCA8K_ATU_FUNC_PORT_S 8 ++#define QCA8K_ATU_FUNC_PORT_MASK GENMASK(11, 8) + #define QCA8K_REG_VTU_FUNC0 0x610 + #define QCA8K_VTU_FUNC0_VALID BIT(20) + #define QCA8K_VTU_FUNC0_IVL_EN BIT(19) +-#define QCA8K_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) +-#define QCA8K_VTU_FUNC0_EG_MODE_MASK 3 +-#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD 0 +-#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG 1 +-#define QCA8K_VTU_FUNC0_EG_MODE_TAG 2 +-#define QCA8K_VTU_FUNC0_EG_MODE_NOT 3 ++/* QCA8K_VTU_FUNC0_EG_MODE_MASK GENMASK(17, 4) ++ * It does contain VLAN_MODE for each port [5:4] for port0, ++ * [7:6] for port1 ... [17:16] for port6. Use virtual port ++ * define to handle this. ++ */ ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i) (4 + (_i) * 2) ++#define QCA8K_VTU_FUNC0_EG_MODE_MASK GENMASK(1, 0) ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(_i) (GENMASK(1, 0) << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)) ++#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x0) ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_UNMOD(_i) (QCA8K_VTU_FUNC0_EG_MODE_UNMOD << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)) ++#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x1) ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(_i) (QCA8K_VTU_FUNC0_EG_MODE_UNTAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)) ++#define QCA8K_VTU_FUNC0_EG_MODE_TAG FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x2) ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(_i) (QCA8K_VTU_FUNC0_EG_MODE_TAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)) ++#define QCA8K_VTU_FUNC0_EG_MODE_NOT FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x3) ++#define QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(_i) (QCA8K_VTU_FUNC0_EG_MODE_NOT << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i)) + #define QCA8K_REG_VTU_FUNC1 0x614 + #define QCA8K_VTU_FUNC1_BUSY BIT(31) +-#define QCA8K_VTU_FUNC1_VID_S 16 ++#define QCA8K_VTU_FUNC1_VID_MASK GENMASK(27, 16) + #define QCA8K_VTU_FUNC1_FULL BIT(4) + #define QCA8K_REG_GLOBAL_FW_CTRL0 0x620 + #define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10) + #define QCA8K_REG_GLOBAL_FW_CTRL1 0x624 +-#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S 24 +-#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_S 16 +-#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_S 8 +-#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0 ++#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK GENMASK(30, 24) ++#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK GENMASK(22, 16) ++#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK GENMASK(14, 8) ++#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK GENMASK(6, 0) + #define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc) + #define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0) +-#define QCA8K_PORT_LOOKUP_VLAN_MODE GENMASK(9, 8) +-#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE (0 << 8) +-#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK (1 << 8) +-#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK (2 << 8) +-#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE (3 << 8) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE_MASK GENMASK(9, 8) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE(x) FIELD_PREP(QCA8K_PORT_LOOKUP_VLAN_MODE_MASK, x) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE QCA8K_PORT_LOOKUP_VLAN_MODE(0x0) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK QCA8K_PORT_LOOKUP_VLAN_MODE(0x1) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK QCA8K_PORT_LOOKUP_VLAN_MODE(0x2) ++#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE QCA8K_PORT_LOOKUP_VLAN_MODE(0x3) + #define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16) +-#define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16) +-#define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16) +-#define QCA8K_PORT_LOOKUP_STATE_LISTENING (2 << 16) +-#define QCA8K_PORT_LOOKUP_STATE_LEARNING (3 << 16) +-#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16) +-#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16) ++#define QCA8K_PORT_LOOKUP_STATE(x) FIELD_PREP(QCA8K_PORT_LOOKUP_STATE_MASK, x) ++#define QCA8K_PORT_LOOKUP_STATE_DISABLED QCA8K_PORT_LOOKUP_STATE(0x0) ++#define QCA8K_PORT_LOOKUP_STATE_BLOCKING QCA8K_PORT_LOOKUP_STATE(0x1) ++#define QCA8K_PORT_LOOKUP_STATE_LISTENING QCA8K_PORT_LOOKUP_STATE(0x2) ++#define QCA8K_PORT_LOOKUP_STATE_LEARNING QCA8K_PORT_LOOKUP_STATE(0x3) ++#define QCA8K_PORT_LOOKUP_STATE_FORWARD QCA8K_PORT_LOOKUP_STATE(0x4) + #define QCA8K_PORT_LOOKUP_LEARN BIT(20) + + #define QCA8K_REG_GLOBAL_FC_THRESH 0x800 +-#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16) +-#define QCA8K_GLOBAL_FC_GOL_XON_THRES_S GENMASK(24, 16) +-#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) ((x) << 0) +-#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S GENMASK(8, 0) ++#define QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK GENMASK(24, 16) ++#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK, x) ++#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK GENMASK(8, 0) ++#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, x) + + #define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF GENMASK(7, 4) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) ((x) << 4) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF GENMASK(11, 8) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) ((x) << 8) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF GENMASK(15, 12) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) ((x) << 12) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF GENMASK(19, 16) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) ((x) << 16) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF GENMASK(23, 20) +-#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) ((x) << 20) +-#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF GENMASK(29, 24) +-#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) ((x) << 24) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK GENMASK(3, 0) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK GENMASK(7, 4) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK GENMASK(11, 8) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK GENMASK(15, 12) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK GENMASK(19, 16) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK GENMASK(23, 20) ++#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK, x) ++#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK GENMASK(29, 24) ++#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK, x) + + #define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) +-#define QCA8K_PORT_HOL_CTRL1_ING_BUF GENMASK(3, 0) +-#define QCA8K_PORT_HOL_CTRL1_ING(x) ((x) << 0) ++#define QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK GENMASK(3, 0) ++#define QCA8K_PORT_HOL_CTRL1_ING(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK, x) + #define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6) + #define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7) + #define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8) + #define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) + + /* Pkt edit registers */ ++#define QCA8K_EGREES_VLAN_PORT_SHIFT(_i) (16 * ((_i) % 2)) ++#define QCA8K_EGREES_VLAN_PORT_MASK(_i) (GENMASK(11, 0) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i)) ++#define QCA8K_EGREES_VLAN_PORT(_i, x) ((x) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i)) + #define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2))) + + /* L3 registers */ diff --git a/target/linux/generic/backport-5.15/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch b/target/linux/generic/backport-5.15/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch new file mode 100644 index 0000000000..8c39b8ea29 --- /dev/null +++ b/target/linux/generic/backport-5.15/755-net-next-net-dsa-qca8k-remove-extra-mutex_init-in-qca8k_setup.patch @@ -0,0 +1,25 @@ +From 994c28b6f971fa5db8ae977daea37eee87d93d51 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:42 +0100 +Subject: net: dsa: qca8k: remove extra mutex_init in qca8k_setup + +Mutex is already init in sw_probe. Remove the extra init in qca8k_setup. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1086,8 +1086,6 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- mutex_init(&priv->reg_mutex); +- + /* Start by setting up the register mapping */ + priv->regmap = devm_regmap_init(ds->dev, NULL, priv, + &qca8k_regmap_config); diff --git a/target/linux/generic/backport-5.15/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch b/target/linux/generic/backport-5.15/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch new file mode 100644 index 0000000000..9fcc74a7ce --- /dev/null +++ b/target/linux/generic/backport-5.15/756-net-next-net-dsa-qca8k-move-regmap-init-in-probe-and-set-it.patch @@ -0,0 +1,46 @@ +From 36b8af12f424e7a7f60a935c60a0fd4aa0822378 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:43 +0100 +Subject: net: dsa: qca8k: move regmap init in probe and set it mandatory + +In preparation for regmap conversion, move regmap init in the probe +function and make it mandatory as any read/write/rmw operation will be +converted to regmap API. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 14 ++++++++------ + 1 file changed, 8 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1086,12 +1086,6 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- /* Start by setting up the register mapping */ +- priv->regmap = devm_regmap_init(ds->dev, NULL, priv, +- &qca8k_regmap_config); +- if (IS_ERR(priv->regmap)) +- dev_warn(priv->dev, "regmap initialization failed"); +- + ret = qca8k_setup_mdio_bus(priv); + if (ret) + return ret; +@@ -2085,6 +2079,14 @@ qca8k_sw_probe(struct mdio_device *mdiod + gpiod_set_value_cansleep(priv->reset_gpio, 0); + } + ++ /* Start by setting up the register mapping */ ++ priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv, ++ &qca8k_regmap_config); ++ if (IS_ERR(priv->regmap)) { ++ dev_err(priv->dev, "regmap initialization failed"); ++ return PTR_ERR(priv->regmap); ++ } ++ + /* Check the detected switch id */ + ret = qca8k_read_switch_id(priv); + if (ret) diff --git a/target/linux/generic/backport-5.15/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch b/target/linux/generic/backport-5.15/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch new file mode 100644 index 0000000000..4ca9c8ba41 --- /dev/null +++ b/target/linux/generic/backport-5.15/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch @@ -0,0 +1,249 @@ +From 8b5f3f29a81a71934d004e21a1292c1148b05926 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:44 +0100 +Subject: net: dsa: qca8k: initial conversion to regmap helper + +Convert any qca8k set/clear/pool to regmap helper and add +missing config to regmap_config struct. +Read/write/rmw operation are reworked to use the regmap helper +internally to keep the delta of this patch low. These additional +function will then be dropped when the code split will be proposed. + +Ipq40xx SoC have the internal switch based on the qca8k regmap but use +mmio for read/write/rmw operation instead of mdio. +In preparation for the support of this internal switch, convert the +driver to regmap API to later split the driver to common and specific +code. The overhead introduced by the use of regamp API is marginal as the +internal mdio will bypass it by using its direct access and regmap will be +used only by configuration functions or fdb access. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 107 +++++++++++++++++++++--------------------------- + 1 file changed, 47 insertions(+), 60 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -10,6 +10,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -152,6 +153,25 @@ qca8k_set_page(struct mii_bus *bus, u16 + static int + qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val) + { ++ return regmap_read(priv->regmap, reg, val); ++} ++ ++static int ++qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) ++{ ++ return regmap_write(priv->regmap, reg, val); ++} ++ ++static int ++qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) ++{ ++ return regmap_update_bits(priv->regmap, reg, mask, write_val); ++} ++ ++static int ++qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) ++{ ++ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + int ret; +@@ -172,8 +192,9 @@ exit: + } + + static int +-qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) ++qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) + { ++ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + int ret; +@@ -194,8 +215,9 @@ exit: + } + + static int +-qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) ++qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val) + { ++ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; + struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; +@@ -223,34 +245,6 @@ exit: + return ret; + } + +-static int +-qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val) +-{ +- return qca8k_rmw(priv, reg, 0, val); +-} +- +-static int +-qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val) +-{ +- return qca8k_rmw(priv, reg, val, 0); +-} +- +-static int +-qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) +-{ +- struct qca8k_priv *priv = (struct qca8k_priv *)ctx; +- +- return qca8k_read(priv, reg, val); +-} +- +-static int +-qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) +-{ +- struct qca8k_priv *priv = (struct qca8k_priv *)ctx; +- +- return qca8k_write(priv, reg, val); +-} +- + static const struct regmap_range qca8k_readable_ranges[] = { + regmap_reg_range(0x0000, 0x00e4), /* Global control */ + regmap_reg_range(0x0100, 0x0168), /* EEE control */ +@@ -282,26 +276,19 @@ static struct regmap_config qca8k_regmap + .max_register = 0x16ac, /* end MIB - Port6 range */ + .reg_read = qca8k_regmap_read, + .reg_write = qca8k_regmap_write, ++ .reg_update_bits = qca8k_regmap_update_bits, + .rd_table = &qca8k_readable_table, ++ .disable_locking = true, /* Locking is handled by qca8k read/write */ ++ .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ + }; + + static int + qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) + { +- int ret, ret1; + u32 val; + +- ret = read_poll_timeout(qca8k_read, ret1, !(val & mask), +- 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, +- priv, reg, &val); +- +- /* Check if qca8k_read has failed for a different reason +- * before returning -ETIMEDOUT +- */ +- if (ret < 0 && ret1 < 0) +- return ret1; +- +- return ret; ++ return regmap_read_poll_timeout(priv->regmap, reg, val, !(val & mask), 0, ++ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC); + } + + static int +@@ -568,7 +555,7 @@ qca8k_mib_init(struct qca8k_priv *priv) + int ret; + + mutex_lock(&priv->reg_mutex); +- ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); ++ ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); + if (ret) + goto exit; + +@@ -576,7 +563,7 @@ qca8k_mib_init(struct qca8k_priv *priv) + if (ret) + goto exit; + +- ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); ++ ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); + if (ret) + goto exit; + +@@ -597,9 +584,9 @@ qca8k_port_set_status(struct qca8k_priv + mask |= QCA8K_PORT_STATUS_LINK_AUTO; + + if (enable) +- qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask); ++ regmap_set_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); + else +- qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask); ++ regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); + } + + static u32 +@@ -861,8 +848,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + * a dt-overlay and driver reload changed the configuration + */ + +- return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, +- QCA8K_MDIO_MASTER_EN); ++ return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL, ++ QCA8K_MDIO_MASTER_EN); + } + + /* Check if the devicetree declare the port:phy mapping */ +@@ -1099,16 +1086,16 @@ qca8k_setup(struct dsa_switch *ds) + return ret; + + /* Make sure MAC06 is disabled */ +- ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL, +- QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); ++ ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, ++ QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); + if (ret) { + dev_err(priv->dev, "failed disabling MAC06 exchange"); + return ret; + } + + /* Enable CPU Port */ +- ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, +- QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); ++ ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, ++ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); + if (ret) { + dev_err(priv->dev, "failed enabling CPU port"); + return ret; +@@ -1176,8 +1163,8 @@ qca8k_setup(struct dsa_switch *ds) + return ret; + + /* Enable ARP Auto-learning by default */ +- ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i), +- QCA8K_PORT_LOOKUP_LEARN); ++ ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), ++ QCA8K_PORT_LOOKUP_LEARN); + if (ret) + return ret; + +@@ -1745,9 +1732,9 @@ qca8k_port_bridge_join(struct dsa_switch + /* Add this port to the portvlan mask of the other ports + * in the bridge + */ +- ret = qca8k_reg_set(priv, +- QCA8K_PORT_LOOKUP_CTRL(i), +- BIT(port)); ++ ret = regmap_set_bits(priv->regmap, ++ QCA8K_PORT_LOOKUP_CTRL(i), ++ BIT(port)); + if (ret) + return ret; + if (i != port) +@@ -1777,9 +1764,9 @@ qca8k_port_bridge_leave(struct dsa_switc + /* Remove this port to the portvlan mask of the other ports + * in the bridge + */ +- qca8k_reg_clear(priv, +- QCA8K_PORT_LOOKUP_CTRL(i), +- BIT(port)); ++ regmap_clear_bits(priv->regmap, ++ QCA8K_PORT_LOOKUP_CTRL(i), ++ BIT(port)); + } + + /* Set the cpu port to be the only one in the portvlan mask of diff --git a/target/linux/generic/backport-5.15/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch b/target/linux/generic/backport-5.15/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch new file mode 100644 index 0000000000..78bdf7f77d --- /dev/null +++ b/target/linux/generic/backport-5.15/758-net-next-net-dsa-qca8k-add-additional-MIB-counter-and-.patch @@ -0,0 +1,120 @@ +From c126f118b330ccf0db0dda4a4bd6c729865a205f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:45 +0100 +Subject: net: dsa: qca8k: add additional MIB counter and make it dynamic + +We are currently missing 2 additionals MIB counter present in QCA833x +switch. +QC832x switch have 39 MIB counter and QCA833X have 41 MIB counter. +Add the additional MIB counter and rework the MIB function to print the +correct supported counter from the match_data struct. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++--- + drivers/net/dsa/qca8k.h | 4 ++++ + 2 files changed, 24 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -70,6 +70,8 @@ static const struct qca8k_mib_desc ar832 + MIB_DESC(1, 0x9c, "TxExcDefer"), + MIB_DESC(1, 0xa0, "TxDefer"), + MIB_DESC(1, 0xa4, "TxLateCol"), ++ MIB_DESC(1, 0xa8, "RXUnicast"), ++ MIB_DESC(1, 0xac, "TXUnicast"), + }; + + /* The 32bit switch registers are accessed indirectly. To achieve this we need +@@ -1605,12 +1607,16 @@ qca8k_phylink_mac_link_up(struct dsa_swi + static void + qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) + { ++ const struct qca8k_match_data *match_data; ++ struct qca8k_priv *priv = ds->priv; + int i; + + if (stringset != ETH_SS_STATS) + return; + +- for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) ++ match_data = of_device_get_match_data(priv->dev); ++ ++ for (i = 0; i < match_data->mib_count; i++) + strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name, + ETH_GSTRING_LEN); + } +@@ -1620,12 +1626,15 @@ qca8k_get_ethtool_stats(struct dsa_switc + uint64_t *data) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; ++ const struct qca8k_match_data *match_data; + const struct qca8k_mib_desc *mib; + u32 reg, i, val; + u32 hi = 0; + int ret; + +- for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) { ++ match_data = of_device_get_match_data(priv->dev); ++ ++ for (i = 0; i < match_data->mib_count; i++) { + mib = &ar8327_mib[i]; + reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset; + +@@ -1648,10 +1657,15 @@ qca8k_get_ethtool_stats(struct dsa_switc + static int + qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset) + { ++ const struct qca8k_match_data *match_data; ++ struct qca8k_priv *priv = ds->priv; ++ + if (sset != ETH_SS_STATS) + return 0; + +- return ARRAY_SIZE(ar8327_mib); ++ match_data = of_device_get_match_data(priv->dev); ++ ++ return match_data->mib_count; + } + + static int +@@ -2146,14 +2160,17 @@ static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, + static const struct qca8k_match_data qca8327 = { + .id = QCA8K_ID_QCA8327, + .reduced_package = true, ++ .mib_count = QCA8K_QCA832X_MIB_COUNT, + }; + + static const struct qca8k_match_data qca8328 = { + .id = QCA8K_ID_QCA8327, ++ .mib_count = QCA8K_QCA832X_MIB_COUNT, + }; + + static const struct qca8k_match_data qca833x = { + .id = QCA8K_ID_QCA8337, ++ .mib_count = QCA8K_QCA833X_MIB_COUNT, + }; + + static const struct of_device_id qca8k_of_match[] = { +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -21,6 +21,9 @@ + #define PHY_ID_QCA8337 0x004dd036 + #define QCA8K_ID_QCA8337 0x13 + ++#define QCA8K_QCA832X_MIB_COUNT 39 ++#define QCA8K_QCA833X_MIB_COUNT 41 ++ + #define QCA8K_BUSY_WAIT_TIMEOUT 2000 + + #define QCA8K_NUM_FDB_RECORDS 2048 +@@ -279,6 +282,7 @@ struct ar8xxx_port_status { + struct qca8k_match_data { + u8 id; + bool reduced_package; ++ u8 mib_count; + }; + + enum { diff --git a/target/linux/generic/backport-5.15/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch b/target/linux/generic/backport-5.15/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch new file mode 100644 index 0000000000..41efa89b5e --- /dev/null +++ b/target/linux/generic/backport-5.15/759-net-next-net-dsa-qca8k-add-support-for-port-fast-aging.patch @@ -0,0 +1,53 @@ +From 4592538bfb0d5d3c3c8a1d7071724d081412ac91 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:46 +0100 +Subject: net: dsa: qca8k: add support for port fast aging + +The switch supports fast aging by flushing any rule in the ARL +table for a specific port. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 11 +++++++++++ + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 12 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1790,6 +1790,16 @@ qca8k_port_bridge_leave(struct dsa_switc + QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); + } + ++static void ++qca8k_port_fast_age(struct dsa_switch *ds, int port) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ ++ mutex_lock(&priv->reg_mutex); ++ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port); ++ mutex_unlock(&priv->reg_mutex); ++} ++ + static int + qca8k_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +@@ -2005,6 +2015,7 @@ static const struct dsa_switch_ops qca8k + .port_stp_state_set = qca8k_port_stp_state_set, + .port_bridge_join = qca8k_port_bridge_join, + .port_bridge_leave = qca8k_port_bridge_leave, ++ .port_fast_age = qca8k_port_fast_age, + .port_fdb_add = qca8k_port_fdb_add, + .port_fdb_del = qca8k_port_fdb_del, + .port_fdb_dump = qca8k_port_fdb_dump, +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -262,6 +262,7 @@ enum qca8k_fdb_cmd { + QCA8K_FDB_FLUSH = 1, + QCA8K_FDB_LOAD = 2, + QCA8K_FDB_PURGE = 3, ++ QCA8K_FDB_FLUSH_PORT = 5, + QCA8K_FDB_NEXT = 6, + QCA8K_FDB_SEARCH = 7, + }; diff --git a/target/linux/generic/backport-5.15/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch b/target/linux/generic/backport-5.15/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch new file mode 100644 index 0000000000..f32e6ae93a --- /dev/null +++ b/target/linux/generic/backport-5.15/760-net-next-net-dsa-qca8k-add-set_ageing_time-support.patch @@ -0,0 +1,78 @@ +From 6a3bdc5209f45d2af83aa92433ab6e5cf2297aa4 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:47 +0100 +Subject: net: dsa: qca8k: add set_ageing_time support + +qca8k support setting ageing time in step of 7s. Add support for it and +set the max value accepted of 7645m. +Documentation talks about support for 10000m but that values doesn't +make sense as the value doesn't match the max value in the reg. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 25 +++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 3 +++ + 2 files changed, 28 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1261,6 +1261,10 @@ qca8k_setup(struct dsa_switch *ds) + /* We don't have interrupts for link changes, so we need to poll */ + ds->pcs_poll = true; + ++ /* Set min a max ageing value supported */ ++ ds->ageing_time_min = 7000; ++ ds->ageing_time_max = 458745000; ++ + return 0; + } + +@@ -1801,6 +1805,26 @@ qca8k_port_fast_age(struct dsa_switch *d + } + + static int ++qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ unsigned int secs = msecs / 1000; ++ u32 val; ++ ++ /* AGE_TIME reg is set in 7s step */ ++ val = secs / 7; ++ ++ /* Handle case with 0 as val to NOT disable ++ * learning ++ */ ++ if (!val) ++ val = 1; ++ ++ return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK, ++ QCA8K_ATU_AGE_TIME(val)); ++} ++ ++static int + qca8k_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) + { +@@ -2006,6 +2030,7 @@ static const struct dsa_switch_ops qca8k + .get_strings = qca8k_get_strings, + .get_ethtool_stats = qca8k_get_ethtool_stats, + .get_sset_count = qca8k_get_sset_count, ++ .set_ageing_time = qca8k_set_ageing_time, + .get_mac_eee = qca8k_get_mac_eee, + .set_mac_eee = qca8k_set_mac_eee, + .port_enable = qca8k_port_enable, +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -175,6 +175,9 @@ + #define QCA8K_VTU_FUNC1_BUSY BIT(31) + #define QCA8K_VTU_FUNC1_VID_MASK GENMASK(27, 16) + #define QCA8K_VTU_FUNC1_FULL BIT(4) ++#define QCA8K_REG_ATU_CTRL 0x618 ++#define QCA8K_ATU_AGE_TIME_MASK GENMASK(15, 0) ++#define QCA8K_ATU_AGE_TIME(x) FIELD_PREP(QCA8K_ATU_AGE_TIME_MASK, (x)) + #define QCA8K_REG_GLOBAL_FW_CTRL0 0x620 + #define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10) + #define QCA8K_REG_GLOBAL_FW_CTRL1 0x624 diff --git a/target/linux/generic/backport-5.15/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch b/target/linux/generic/backport-5.15/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch new file mode 100644 index 0000000000..e0daa88c31 --- /dev/null +++ b/target/linux/generic/backport-5.15/761-net-next-net-dsa-qca8k-add-support-for-mdb_add-del.patch @@ -0,0 +1,142 @@ +From ba8f870dfa635113ce6e8095a5eb1835ecde2e9e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 22 Nov 2021 16:23:48 +0100 +Subject: net: dsa: qca8k: add support for mdb_add/del + +Add support for mdb add/del function. The ARL table is used to insert +the rule. The rule will be searched, deleted and reinserted with the +port mask updated. The function will check if the rule has to be updated +or insert directly with no deletion of the old rule. +If every port is removed from the port mask, the rule is removed. +The rule is set STATIC in the ARL table (aka it doesn't age) to not be +flushed by fast age function. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 99 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -436,6 +436,81 @@ qca8k_fdb_flush(struct qca8k_priv *priv) + } + + static int ++qca8k_fdb_search_and_insert(struct qca8k_priv *priv, u8 port_mask, ++ const u8 *mac, u16 vid) ++{ ++ struct qca8k_fdb fdb = { 0 }; ++ int ret; ++ ++ mutex_lock(&priv->reg_mutex); ++ ++ qca8k_fdb_write(priv, vid, 0, mac, 0); ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1); ++ if (ret < 0) ++ goto exit; ++ ++ ret = qca8k_fdb_read(priv, &fdb); ++ if (ret < 0) ++ goto exit; ++ ++ /* Rule exist. Delete first */ ++ if (!fdb.aging) { ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1); ++ if (ret) ++ goto exit; ++ } ++ ++ /* Add port to fdb portmask */ ++ fdb.port_mask |= port_mask; ++ ++ qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging); ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1); ++ ++exit: ++ mutex_unlock(&priv->reg_mutex); ++ return ret; ++} ++ ++static int ++qca8k_fdb_search_and_del(struct qca8k_priv *priv, u8 port_mask, ++ const u8 *mac, u16 vid) ++{ ++ struct qca8k_fdb fdb = { 0 }; ++ int ret; ++ ++ mutex_lock(&priv->reg_mutex); ++ ++ qca8k_fdb_write(priv, vid, 0, mac, 0); ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1); ++ if (ret < 0) ++ goto exit; ++ ++ /* Rule doesn't exist. Why delete? */ ++ if (!fdb.aging) { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1); ++ if (ret) ++ goto exit; ++ ++ /* Only port in the rule is this port. Don't re insert */ ++ if (fdb.port_mask == port_mask) ++ goto exit; ++ ++ /* Remove port from port mask */ ++ fdb.port_mask &= ~port_mask; ++ ++ qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging); ++ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1); ++ ++exit: ++ mutex_unlock(&priv->reg_mutex); ++ return ret; ++} ++ ++static int + qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid) + { + u32 reg; +@@ -1929,6 +2004,28 @@ qca8k_port_fdb_dump(struct dsa_switch *d + return 0; + } + ++static void ++qca8k_port_mdb_add(struct dsa_switch *ds, int port, ++ const struct switchdev_obj_port_mdb *mdb) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ const u8 *addr = mdb->addr; ++ u16 vid = mdb->vid; ++ ++ qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid); ++} ++ ++static int ++qca8k_port_mdb_del(struct dsa_switch *ds, int port, ++ const struct switchdev_obj_port_mdb *mdb) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ const u8 *addr = mdb->addr; ++ u16 vid = mdb->vid; ++ ++ return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid); ++} ++ + static int + qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct switchdev_trans *trans) +@@ -2044,6 +2141,8 @@ static const struct dsa_switch_ops qca8k + .port_fdb_add = qca8k_port_fdb_add, + .port_fdb_del = qca8k_port_fdb_del, + .port_fdb_dump = qca8k_port_fdb_dump, ++ .port_mdb_add = qca8k_port_mdb_add, ++ .port_mdb_del = qca8k_port_mdb_del, + .port_vlan_filtering = qca8k_port_vlan_filtering, + .port_vlan_prepare = qca8k_port_vlan_prepare, + .port_vlan_add = qca8k_port_vlan_add, diff --git a/target/linux/generic/backport-5.15/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch b/target/linux/generic/backport-5.15/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch new file mode 100644 index 0000000000..eb487cdfb5 --- /dev/null +++ b/target/linux/generic/backport-5.15/762-v5.11-net-dsa-mt7530-support-setting-MTU.patch @@ -0,0 +1,112 @@ +From 9470174e7581e75a8ebd78964997314dfc2e706c Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Tue, 3 Nov 2020 13:06:18 +0800 +Subject: [PATCH] net: dsa: mt7530: support setting MTU + +MT7530/7531 has a global RX packet length register, which can be used +to set MTU. + +Supported packet length values are 1522 (1518 if untagged), 1536, +1552, and multiple of 1024 (from 2048 to 15360). + +Signed-off-by: DENG Qingfang +Link: https://lore.kernel.org/r/20201103050618.11419-1-dqfext@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.h | 12 ++++++++++ + 2 files changed, 61 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1015,6 +1015,53 @@ mt7530_port_disable(struct dsa_switch *d + mutex_unlock(&priv->reg_mutex); + } + ++static int ++mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ struct mii_bus *bus = priv->bus; ++ int length; ++ u32 val; ++ ++ /* When a new MTU is set, DSA always set the CPU port's MTU to the ++ * largest MTU of the slave ports. Because the switch only has a global ++ * RX length register, only allowing CPU port here is enough. ++ */ ++ if (!dsa_is_cpu_port(ds, port)) ++ return 0; ++ ++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ ++ val = mt7530_mii_read(priv, MT7530_GMACCR); ++ val &= ~MAX_RX_PKT_LEN_MASK; ++ ++ /* RX length also includes Ethernet header, MTK tag, and FCS length */ ++ length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; ++ if (length <= 1522) { ++ val |= MAX_RX_PKT_LEN_1522; ++ } else if (length <= 1536) { ++ val |= MAX_RX_PKT_LEN_1536; ++ } else if (length <= 1552) { ++ val |= MAX_RX_PKT_LEN_1552; ++ } else { ++ val &= ~MAX_RX_JUMBO_MASK; ++ val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); ++ val |= MAX_RX_PKT_LEN_JUMBO; ++ } ++ ++ mt7530_mii_write(priv, MT7530_GMACCR, val); ++ ++ mutex_unlock(&bus->mdio_lock); ++ ++ return 0; ++} ++ ++static int ++mt7530_port_max_mtu(struct dsa_switch *ds, int port) ++{ ++ return MT7530_MAX_MTU; ++} ++ + static void + mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) + { +@@ -2652,6 +2699,8 @@ static const struct dsa_switch_ops mt753 + .get_sset_count = mt7530_get_sset_count, + .port_enable = mt7530_port_enable, + .port_disable = mt7530_port_disable, ++ .port_change_mtu = mt7530_port_change_mtu, ++ .port_max_mtu = mt7530_port_max_mtu, + .port_stp_state_set = mt7530_stp_state_set, + .port_bridge_join = mt7530_port_bridge_join, + .port_bridge_leave = mt7530_port_bridge_leave, +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -11,6 +11,9 @@ + #define MT7530_NUM_FDB_RECORDS 2048 + #define MT7530_ALL_MEMBERS 0xff + ++#define MTK_HDR_LEN 4 ++#define MT7530_MAX_MTU (15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN) ++ + enum mt753x_id { + ID_MT7530 = 0, + ID_MT7621 = 1, +@@ -301,6 +304,15 @@ enum mt7530_vlan_port_attr { + #define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100) + #define MT7531_DIS_CLR BIT(31) + ++#define MT7530_GMACCR 0x30e0 ++#define MAX_RX_JUMBO(x) ((x) << 2) ++#define MAX_RX_JUMBO_MASK GENMASK(5, 2) ++#define MAX_RX_PKT_LEN_MASK GENMASK(1, 0) ++#define MAX_RX_PKT_LEN_1522 0x0 ++#define MAX_RX_PKT_LEN_1536 0x1 ++#define MAX_RX_PKT_LEN_1552 0x2 ++#define MAX_RX_PKT_LEN_JUMBO 0x3 ++ + /* Register for MIB */ + #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) + #define MT7530_MIB_CCR 0x4fe0 diff --git a/target/linux/generic/backport-5.15/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch b/target/linux/generic/backport-5.15/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch new file mode 100644 index 0000000000..b0ad7b9f87 --- /dev/null +++ b/target/linux/generic/backport-5.15/763-v5.11-net-dsa-mt7530-enable-MTU-normalization.patch @@ -0,0 +1,36 @@ +From 771c8901568dd8776a260aa93db41be88a60389e Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Fri, 11 Dec 2020 01:03:22 +0800 +Subject: [PATCH] net: dsa: mt7530: enable MTU normalization + +MT7530 has a global RX length register, so we are actually changing its +MRU. +Enable MTU normalization for this reason. + +Signed-off-by: DENG Qingfang +Acked-by: Landen Chao +Reviewed-by: Vladimir Oltean +Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1703,6 +1703,7 @@ mt7530_setup(struct dsa_switch *ds) + */ + dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; + ds->configure_vlan_while_not_filtering = true; ++ ds->mtu_enforcement_ingress = true; + + if (priv->id == ID_MT7530) { + regulator_set_voltage(priv->core_pwr, 1000000, 1000000); +@@ -1947,6 +1948,7 @@ mt7531_setup(struct dsa_switch *ds) + } + + ds->configure_vlan_while_not_filtering = true; ++ ds->mtu_enforcement_ingress = true; + + /* Flush the FDB table */ + ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); diff --git a/target/linux/generic/backport-5.15/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch b/target/linux/generic/backport-5.15/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch new file mode 100644 index 0000000000..44fa40eabe --- /dev/null +++ b/target/linux/generic/backport-5.15/764-v5.11-net-dsa-mt7530-support-setting-ageing-time.patch @@ -0,0 +1,99 @@ +From ea6d5c924e391872d402acac38461a5f8261e57f Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Tue, 8 Dec 2020 15:00:28 +0800 +Subject: [PATCH] net: dsa: mt7530: support setting ageing time + +MT7530 has a global address age control register, so use it to set +ageing time. + +The applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds + +Signed-off-by: DENG Qingfang +Reviewed-by: Andrew Lunn +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 41 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.h | 13 +++++++++++++ + 2 files changed, 54 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -870,6 +870,46 @@ mt7530_get_sset_count(struct dsa_switch + return ARRAY_SIZE(mt7530_mib); + } + ++static int ++mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ unsigned int secs = msecs / 1000; ++ unsigned int tmp_age_count; ++ unsigned int error = -1; ++ unsigned int age_count; ++ unsigned int age_unit; ++ ++ /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */ ++ if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1)) ++ return -ERANGE; ++ ++ /* iterate through all possible age_count to find the closest pair */ ++ for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { ++ unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1; ++ ++ if (tmp_age_unit <= AGE_UNIT_MAX) { ++ unsigned int tmp_error = secs - ++ (tmp_age_count + 1) * (tmp_age_unit + 1); ++ ++ /* found a closer pair */ ++ if (error > tmp_error) { ++ error = tmp_error; ++ age_count = tmp_age_count; ++ age_unit = tmp_age_unit; ++ } ++ ++ /* found the exact match, so break the loop */ ++ if (!error) ++ break; ++ } ++ } ++ ++ mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit)); ++ ++ return 0; ++} ++ + static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) + { + struct mt7530_priv *priv = ds->priv; +@@ -2699,6 +2739,7 @@ static const struct dsa_switch_ops mt753 + .phy_write = mt753x_phy_write, + .get_ethtool_stats = mt7530_get_ethtool_stats, + .get_sset_count = mt7530_get_sset_count, ++ .set_ageing_time = mt7530_set_ageing_time, + .port_enable = mt7530_port_enable, + .port_disable = mt7530_port_disable, + .port_change_mtu = mt7530_port_change_mtu, +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -161,6 +161,19 @@ enum mt7530_vlan_egress_attr { + MT7530_VLAN_EGRESS_STACK = 3, + }; + ++/* Register for address age control */ ++#define MT7530_AAC 0xa0 ++/* Disable ageing */ ++#define AGE_DIS BIT(20) ++/* Age count */ ++#define AGE_CNT_MASK GENMASK(19, 12) ++#define AGE_CNT_MAX 0xff ++#define AGE_CNT(x) (AGE_CNT_MASK & ((x) << 12)) ++/* Age unit */ ++#define AGE_UNIT_MASK GENMASK(11, 0) ++#define AGE_UNIT_MAX 0xfff ++#define AGE_UNIT(x) (AGE_UNIT_MASK & (x)) ++ + /* Register for port STP state control */ + #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100)) + #define FID_PST(x) ((x) & 0x3) diff --git a/target/linux/generic/backport-5.15/765-v5.15-net-dsa-mt7530-disable-learning-on-standalone-ports.patch b/target/linux/generic/backport-5.15/765-v5.15-net-dsa-mt7530-disable-learning-on-standalone-ports.patch new file mode 100644 index 0000000000..a0bb7fa888 --- /dev/null +++ b/target/linux/generic/backport-5.15/765-v5.15-net-dsa-mt7530-disable-learning-on-standalone-ports.patch @@ -0,0 +1,65 @@ +From ba2203f36b981235556504fb7b62baee28512a40 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Tue, 24 Aug 2021 11:37:50 +0800 +Subject: [PATCH] net: dsa: mt7530: disable learning on standalone ports + +This is a partial backport of commit 5a30833b9a16f8d1aa15de06636f9317ca51f9df +("net: dsa: mt7530: support MDB and bridge flag operations") upstream. + +Make sure that the standalone ports start up with learning disabled. + +Signed-off-by: DENG Qingfang +--- + drivers/net/dsa/mt7530.c | 16 ++++++++++++++-- + 1 file changed, 14 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1163,6 +1163,8 @@ mt7530_port_bridge_join(struct dsa_switc + PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); + priv->ports[port].pm |= PCR_MATRIX(port_bitmap); + ++ mt7530_clear(priv, MT7530_PSC_P(port), SA_DIS); ++ + mutex_unlock(&priv->reg_mutex); + + return 0; +@@ -1260,6 +1262,8 @@ mt7530_port_bridge_leave(struct dsa_swit + PCR_MATRIX(BIT(MT7530_CPU_PORT))); + priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); + ++ mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); ++ + mutex_unlock(&priv->reg_mutex); + } + +@@ -1817,9 +1821,13 @@ mt7530_setup(struct dsa_switch *ds) + ret = mt753x_cpu_port_enable(ds, i); + if (ret) + return ret; +- } else ++ } else { + mt7530_port_disable(ds, i); + ++ /* Disable learning by default on all user ports */ ++ mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); ++ } ++ + /* Enable consistent egress tag */ + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); +@@ -1979,9 +1987,13 @@ mt7531_setup(struct dsa_switch *ds) + ret = mt753x_cpu_port_enable(ds, i); + if (ret) + return ret; +- } else ++ } else { + mt7530_port_disable(ds, i); + ++ /* Disable learning by default on all user ports */ ++ mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); ++ } ++ + /* Enable consistent egress tag */ + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); diff --git a/target/linux/generic/backport-5.15/766-v5.15-net-dsa-mt7530-enable-assisted-learning-on-CPU-port.patch b/target/linux/generic/backport-5.15/766-v5.15-net-dsa-mt7530-enable-assisted-learning-on-CPU-port.patch new file mode 100644 index 0000000000..f376ff949a --- /dev/null +++ b/target/linux/generic/backport-5.15/766-v5.15-net-dsa-mt7530-enable-assisted-learning-on-CPU-port.patch @@ -0,0 +1,102 @@ +From 59c8adbc8e2c7f6b46385f36962eadaad3ea2daa Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 4 Aug 2021 00:04:01 +0800 +Subject: [PATCH] net: dsa: mt7530: enable assisted learning on CPU port + +Consider the following bridge configuration, where bond0 is not +offloaded: + + +-- br0 --+ + / / | \ + / / | \ + / | | bond0 + / | | / \ + swp0 swp1 swp2 swp3 swp4 + . . . + . . . + A B C + +Address learning is enabled on offloaded ports (swp0~2) and the CPU +port, so when client A sends a packet to C, the following will happen: + +1. The switch learns that client A can be reached at swp0. +2. The switch probably already knows that client C can be reached at the + CPU port, so it forwards the packet to the CPU. +3. The bridge core knows client C can be reached at bond0, so it + forwards the packet back to the switch. +4. The switch learns that client A can be reached at the CPU port. +5. The switch forwards the packet to either swp3 or swp4, according to + the packet's tag. + +That makes client A's MAC address flap between swp0 and the CPU port. If +client B sends a packet to A, it is possible that the packet is +forwarded to the CPU. With offload_fwd_mark = 1, the bridge core won't +forward it back to the switch, resulting in packet loss. + +As we have the assisted_learning_on_cpu_port in DSA core now, enable +that and disable hardware learning on the CPU port. + +Signed-off-by: DENG Qingfang +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 14 ++++++++------ + 1 file changed, 8 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1747,6 +1747,7 @@ mt7530_setup(struct dsa_switch *ds) + */ + dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; + ds->configure_vlan_while_not_filtering = true; ++ ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + + if (priv->id == ID_MT7530) { +@@ -1817,15 +1818,15 @@ mt7530_setup(struct dsa_switch *ds) + mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, + PCR_MATRIX_CLR); + ++ /* Disable learning by default on all ports */ ++ mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); ++ + if (dsa_is_cpu_port(ds, i)) { + ret = mt753x_cpu_port_enable(ds, i); + if (ret) + return ret; + } else { + mt7530_port_disable(ds, i); +- +- /* Disable learning by default on all user ports */ +- mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); + } + + /* Enable consistent egress tag */ +@@ -1981,6 +1982,9 @@ mt7531_setup(struct dsa_switch *ds) + mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, + PCR_MATRIX_CLR); + ++ /* Disable learning by default on all ports */ ++ mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); ++ + mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); + + if (dsa_is_cpu_port(ds, i)) { +@@ -1989,9 +1993,6 @@ mt7531_setup(struct dsa_switch *ds) + return ret; + } else { + mt7530_port_disable(ds, i); +- +- /* Disable learning by default on all user ports */ +- mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); + } + + /* Enable consistent egress tag */ +@@ -2000,6 +2001,7 @@ mt7531_setup(struct dsa_switch *ds) + } + + ds->configure_vlan_while_not_filtering = true; ++ ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + + /* Flush the FDB table */ diff --git a/target/linux/generic/backport-5.15/767-v5.15-net-dsa-mt7530-use-independent-VLAN-learning-on-VLAN.patch b/target/linux/generic/backport-5.15/767-v5.15-net-dsa-mt7530-use-independent-VLAN-learning-on-VLAN.patch new file mode 100644 index 0000000000..f9fe0ef858 --- /dev/null +++ b/target/linux/generic/backport-5.15/767-v5.15-net-dsa-mt7530-use-independent-VLAN-learning-on-VLAN.patch @@ -0,0 +1,262 @@ +From e3a402764c5753698e7a9e45d4d21f093faa7852 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 4 Aug 2021 00:04:02 +0800 +Subject: [PATCH] net: dsa: mt7530: use independent VLAN learning on + VLAN-unaware bridges + +Consider the following bridge configuration, where bond0 is not +offloaded: + + +-- br0 --+ + / / | \ + / / | \ + / | | bond0 + / | | / \ + swp0 swp1 swp2 swp3 swp4 + . . . + . . . + A B C + +Ideally, when the switch receives a packet from swp3 or swp4, it should +forward the packet to the CPU, according to the port matrix and unknown +unicast flood settings. + +But packet loss will happen if the destination address is at one of the +offloaded ports (swp0~2). For example, when client C sends a packet to +A, the FDB lookup will indicate that it should be forwarded to swp0, but +the port matrix of swp3 and swp4 is configured to only allow the CPU to +be its destination, so it is dropped. + +However, this issue does not happen if the bridge is VLAN-aware. That is +because VLAN-aware bridges use independent VLAN learning, i.e. use VID +for FDB lookup, on offloaded ports. As swp3 and swp4 are not offloaded, +shared VLAN learning with default filter ID of 0 is used instead. So the +lookup for A with filter ID 0 never hits and the packet can be forwarded +to the CPU. + +In the current code, only two combinations were used to toggle user +ports' VLAN awareness: one is PCR.PORT_VLAN set to port matrix mode with +PVC.VLAN_ATTR set to transparent port, the other is PCR.PORT_VLAN set to +security mode with PVC.VLAN_ATTR set to user port. + +It turns out that only PVC.VLAN_ATTR contributes to VLAN awareness, and +port matrix mode just skips the VLAN table lookup. The reference manual +is somehow misleading when describing PORT_VLAN modes. It states that +PORT_MEM (VLAN port member) is used for destination if the VLAN table +lookup hits, but actually **PORT_MEM & PORT_MATRIX** (bitwise AND of +VLAN port member and port matrix) is used instead, which means we can +have two or more separate VLAN-aware bridges with the same PVID and +traffic won't leak between them. + +Therefore, to solve this, enable independent VLAN learning with PVID 0 +on VLAN-unaware bridges, by setting their PCR.PORT_VLAN to fallback +mode, while leaving standalone ports in port matrix mode. The CPU port +is always set to fallback mode to serve those bridges. + +During testing, it is found that FDB lookup with filter ID of 0 will +also hit entries with VID 0 even with independent VLAN learning. To +avoid that, install all VLANs with filter ID of 1. + +Signed-off-by: DENG Qingfang +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 72 +++++++++++++++++++++++++++++----------- + drivers/net/dsa/mt7530.h | 9 ++++- + 2 files changed, 60 insertions(+), 21 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1011,6 +1011,10 @@ mt753x_cpu_port_enable(struct dsa_switch + mt7530_write(priv, MT7530_PCR_P(port), + PCR_MATRIX(dsa_user_ports(priv->ds))); + ++ /* Set to fallback mode for independent VLAN learning */ ++ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, ++ MT7530_PORT_FALLBACK_MODE); ++ + return 0; + } + +@@ -1165,6 +1169,10 @@ mt7530_port_bridge_join(struct dsa_switc + + mt7530_clear(priv, MT7530_PSC_P(port), SA_DIS); + ++ /* Set to fallback mode for independent VLAN learning */ ++ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, ++ MT7530_PORT_FALLBACK_MODE); ++ + mutex_unlock(&priv->reg_mutex); + + return 0; +@@ -1177,16 +1185,21 @@ mt7530_port_set_vlan_unaware(struct dsa_ + bool all_user_ports_removed = true; + int i; + +- /* When a port is removed from the bridge, the port would be set up +- * back to the default as is at initial boot which is a VLAN-unaware +- * port. ++ /* This is called after .port_bridge_leave when leaving a VLAN-aware ++ * bridge. Don't set standalone ports to fallback mode. + */ +- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, +- MT7530_PORT_MATRIX_MODE); ++ if (dsa_to_port(ds, port)->bridge_dev) ++ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, ++ MT7530_PORT_FALLBACK_MODE); ++ + mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK, + VLAN_ATTR(MT7530_VLAN_TRANSPARENT) | + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); + ++ /* Set PVID to 0 */ ++ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, ++ G0_PORT_VID_DEF); ++ + for (i = 0; i < MT7530_NUM_PORTS; i++) { + if (dsa_is_user_port(ds, i) && + dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { +@@ -1212,15 +1225,14 @@ mt7530_port_set_vlan_aware(struct dsa_sw + struct mt7530_priv *priv = ds->priv; + + /* Trapped into security mode allows packet forwarding through VLAN +- * table lookup. CPU port is set to fallback mode to let untagged +- * frames pass through. ++ * table lookup. + */ +- if (dsa_is_cpu_port(ds, port)) +- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, +- MT7530_PORT_FALLBACK_MODE); +- else ++ if (dsa_is_user_port(ds, port)) { + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_SECURITY_MODE); ++ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, ++ G0_PORT_VID(priv->ports[port].pvid)); ++ } + + /* Set the port as a user port which is to be able to recognize VID + * from incoming packets before fetching entry within the VLAN table. +@@ -1264,6 +1276,13 @@ mt7530_port_bridge_leave(struct dsa_swit + + mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); + ++ /* When a port is removed from the bridge, the port would be set up ++ * back to the default as is at initial boot which is a VLAN-unaware ++ * port. ++ */ ++ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, ++ MT7530_PORT_MATRIX_MODE); ++ + mutex_unlock(&priv->reg_mutex); + } + +@@ -1406,7 +1425,8 @@ mt7530_hw_vlan_add(struct mt7530_priv *p + /* Validate the entry with independent learning, create egress tag per + * VLAN and joining the port as one of the port members. + */ +- val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID; ++ val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) | ++ VLAN_VALID; + mt7530_write(priv, MT7530_VAWD1, val); + + /* Decide whether adding tag or not for those outgoing packets from the +@@ -1499,9 +1519,13 @@ mt7530_port_vlan_add(struct dsa_switch * + } + + if (pvid) { +- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, +- G0_PORT_VID(vlan->vid_end)); + priv->ports[port].pvid = vlan->vid_end; ++ ++ /* Only configure PVID if VLAN filtering is enabled */ ++ if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) ++ mt7530_rmw(priv, MT7530_PPBV1_P(port), ++ G0_PORT_VID_MASK, ++ G0_PORT_VID(vlan->vid_end)); + } + + mutex_unlock(&priv->reg_mutex); +@@ -1513,11 +1537,10 @@ mt7530_port_vlan_del(struct dsa_switch * + { + struct mt7530_hw_vlan_entry target_entry; + struct mt7530_priv *priv = ds->priv; +- u16 vid, pvid; ++ u16 vid; + + mutex_lock(&priv->reg_mutex); + +- pvid = priv->ports[port].pvid; + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + mt7530_hw_vlan_entry_init(&target_entry, port, 0); + mt7530_hw_vlan_update(priv, vid, &target_entry, +@@ -1526,12 +1549,13 @@ mt7530_port_vlan_del(struct dsa_switch * + /* PVID is being restored to the default whenever the PVID port + * is being removed from the VLAN. + */ +- if (pvid == vid) +- pvid = G0_PORT_VID_DEF; ++ if (priv->ports[port].pvid == vid) { ++ priv->ports[port].pvid = G0_PORT_VID_DEF; ++ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, ++ G0_PORT_VID_DEF); ++ } + } + +- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid); +- priv->ports[port].pvid = pvid; + + mutex_unlock(&priv->reg_mutex); + +@@ -1827,6 +1851,10 @@ mt7530_setup(struct dsa_switch *ds) + return ret; + } else { + mt7530_port_disable(ds, i); ++ ++ /* Set default PVID to 0 on all user ports */ ++ mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, ++ G0_PORT_VID_DEF); + } + + /* Enable consistent egress tag */ +@@ -1993,6 +2021,10 @@ mt7531_setup(struct dsa_switch *ds) + return ret; + } else { + mt7530_port_disable(ds, i); ++ ++ /* Set default PVID to 0 on all user ports */ ++ mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, ++ G0_PORT_VID_DEF); + } + + /* Enable consistent egress tag */ +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -145,11 +145,18 @@ enum mt7530_vlan_cmd { + #define VTAG_EN BIT(28) + /* VLAN Member Control */ + #define PORT_MEM(x) (((x) & 0xff) << 16) ++/* Filter ID */ ++#define FID(x) (((x) & 0x7) << 1) + /* VLAN Entry Valid */ + #define VLAN_VALID BIT(0) + #define PORT_MEM_SHFT 16 + #define PORT_MEM_MASK 0xff + ++enum mt7530_fid { ++ FID_STANDALONE = 0, ++ FID_BRIDGED = 1, ++}; ++ + #define MT7530_VAWD2 0x98 + /* Egress Tag Control */ + #define ETAG_CTRL_P(p, x) (((x) & 0x3) << ((p) << 1)) +@@ -244,7 +251,7 @@ enum mt7530_vlan_port_attr { + #define MT7530_PPBV1_P(x) (0x2014 + ((x) * 0x100)) + #define G0_PORT_VID(x) (((x) & 0xfff) << 0) + #define G0_PORT_VID_MASK G0_PORT_VID(0xfff) +-#define G0_PORT_VID_DEF G0_PORT_VID(1) ++#define G0_PORT_VID_DEF G0_PORT_VID(0) + + /* Register for port MAC control register */ + #define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100)) diff --git a/target/linux/generic/backport-5.15/768-v5.15-net-dsa-mt7530-set-STP-state-on-filter-ID-1.patch b/target/linux/generic/backport-5.15/768-v5.15-net-dsa-mt7530-set-STP-state-on-filter-ID-1.patch new file mode 100644 index 0000000000..2c1958bd43 --- /dev/null +++ b/target/linux/generic/backport-5.15/768-v5.15-net-dsa-mt7530-set-STP-state-on-filter-ID-1.patch @@ -0,0 +1,40 @@ +From c5ffcefcb40420528d04c63e7dfc88f2845c9831 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 4 Aug 2021 00:04:03 +0800 +Subject: [PATCH] net: dsa: mt7530: set STP state on filter ID 1 + +As filter ID 1 is the only one used for bridges, set STP state on it. + +Signed-off-by: DENG Qingfang +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 3 ++- + drivers/net/dsa/mt7530.h | 4 ++-- + 2 files changed, 4 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1131,7 +1131,8 @@ mt7530_stp_state_set(struct dsa_switch * + break; + } + +- mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state); ++ mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED), ++ FID_PST(FID_BRIDGED, stp_state)); + } + + static int +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -183,8 +183,8 @@ enum mt7530_vlan_egress_attr { + + /* Register for port STP state control */ + #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100)) +-#define FID_PST(x) ((x) & 0x3) +-#define FID_PST_MASK FID_PST(0x3) ++#define FID_PST(fid, state) (((state) & 0x3) << ((fid) * 2)) ++#define FID_PST_MASK(fid) FID_PST(fid, 0x3) + + enum mt7530_stp_state { + MT7530_STP_DISABLED = 0, diff --git a/target/linux/generic/backport-5.15/769-v5.15-net-dsa-mt7530-always-install-FDB-entries-with-IVL-a.patch b/target/linux/generic/backport-5.15/769-v5.15-net-dsa-mt7530-always-install-FDB-entries-with-IVL-a.patch new file mode 100644 index 0000000000..97824068f0 --- /dev/null +++ b/target/linux/generic/backport-5.15/769-v5.15-net-dsa-mt7530-always-install-FDB-entries-with-IVL-a.patch @@ -0,0 +1,54 @@ +From 138c126a33f7564edb66b1da5b847e4a60740bfc Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 4 Aug 2021 00:04:04 +0800 +Subject: [PATCH] net: dsa: mt7530: always install FDB entries with IVL and FID + 1 + +This reverts commit 7e777021780e ("mt7530 mt7530_fdb_write only set ivl +bit vid larger than 1"). + +Before this series, the default value of all ports' PVID is 1, which is +copied into the FDB entry, even if the ports are VLAN unaware. So +`bridge fdb show` will show entries like `dev swp0 vlan 1 self` even on +a VLAN-unaware bridge. + +The blamed commit does not solve that issue completely, instead it may +cause a new issue that FDB is inaccessible in a VLAN-aware bridge with +PVID 1. + +This series sets PVID to 0 on VLAN-unaware ports, so `bridge fdb show` +will no longer print `vlan 1` on VLAN-unaware bridges, and that special +case in fdb_write is not required anymore. + +Set FDB entries' filter ID to 1 to match the VLAN table. + +Signed-off-by: DENG Qingfang +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 2 ++ + drivers/net/dsa/mt7530.h | 2 ++ + 2 files changed, 4 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -361,6 +361,8 @@ mt7530_fdb_write(struct mt7530_priv *pri + int i; + + reg[1] |= vid & CVID_MASK; ++ reg[1] |= ATA2_IVL; ++ reg[1] |= ATA2_FID(FID_BRIDGED); + reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; + reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; + /* STATIC_ENT indicate that entry is static wouldn't +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -77,6 +77,8 @@ enum mt753x_bpdu_port_fw { + #define STATIC_EMP 0 + #define STATIC_ENT 3 + #define MT7530_ATA2 0x78 ++#define ATA2_IVL BIT(15) ++#define ATA2_FID(x) (((x) & 0x7) << 12) + + /* Register for address table write data */ + #define MT7530_ATWD 0x7c diff --git a/target/linux/generic/backport-5.15/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch b/target/linux/generic/backport-5.15/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch new file mode 100644 index 0000000000..5d91d5a657 --- /dev/null +++ b/target/linux/generic/backport-5.15/770-v5.15-net-dsa-mt7530-support-MDB-operations.patch @@ -0,0 +1,171 @@ +From 1f11a07a33bc26997c18b633d63f088bf75d11f2 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Tue, 24 Aug 2021 11:37:50 +0800 +Subject: [PATCH] net: dsa: mt7530: support MDB operations + +This is a partial backport of commit 5a30833b9a16f8d1aa15de06636f9317ca51f9df +("net: dsa: mt7530: support MDB and bridge flag operations") upstream. + +Signed-off-by: DENG Qingfang +--- + drivers/net/dsa/mt7530.c | 78 ++++++++++++++++++++++++++++++++++++++-- + net/dsa/tag_mtk.c | 14 +------- + 2 files changed, 76 insertions(+), 16 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1000,9 +1000,6 @@ mt753x_cpu_port_enable(struct dsa_switch + mt7530_write(priv, MT7530_PVC_P(port), + PORT_SPEC_TAG); + +- /* Unknown multicast frame forwarding to the cpu port */ +- mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port))); +- + /* Set CPU port number */ + if (priv->id == ID_MT7621) + mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); +@@ -1138,6 +1135,20 @@ mt7530_stp_state_set(struct dsa_switch * + } + + static int ++mt7530_port_egress_floods(struct dsa_switch *ds, int port, ++ bool unicast, bool multicast) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ mt7530_rmw(priv, MT7530_MFC, ++ UNU_FFP(BIT(port)) | UNM_FFP(BIT(port)), ++ (unicast ? UNU_FFP(BIT(port)) : 0) | ++ (multicast ? UNM_FFP(BIT(port)) : 0)); ++ ++ return 0; ++} ++ ++static int + mt7530_port_bridge_join(struct dsa_switch *ds, int port, + struct net_device *bridge) + { +@@ -1357,6 +1368,63 @@ err: + } + + static int ++mt7530_port_mdb_prepare(struct dsa_switch *ds, int port, ++ const struct switchdev_obj_port_mdb *mdb) ++{ ++ return 0; ++} ++ ++static void ++mt7530_port_mdb_add(struct dsa_switch *ds, int port, ++ const struct switchdev_obj_port_mdb *mdb) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ const u8 *addr = mdb->addr; ++ u16 vid = mdb->vid; ++ u8 port_mask = 0; ++ ++ mutex_lock(&priv->reg_mutex); ++ ++ mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); ++ if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) ++ port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) ++ & PORT_MAP_MASK; ++ ++ port_mask |= BIT(port); ++ mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); ++ mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); ++ ++ mutex_unlock(&priv->reg_mutex); ++} ++ ++static int ++mt7530_port_mdb_del(struct dsa_switch *ds, int port, ++ const struct switchdev_obj_port_mdb *mdb) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ const u8 *addr = mdb->addr; ++ u16 vid = mdb->vid; ++ u8 port_mask = 0; ++ int ret; ++ ++ mutex_lock(&priv->reg_mutex); ++ ++ mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); ++ if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) ++ port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) ++ & PORT_MAP_MASK; ++ ++ port_mask &= ~BIT(port); ++ mt7530_fdb_write(priv, vid, port_mask, addr, -1, ++ port_mask ? STATIC_ENT : STATIC_EMP); ++ ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); ++ ++ mutex_unlock(&priv->reg_mutex); ++ ++ return ret; ++} ++ ++static int + mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) + { + struct mt7530_dummy_poll p; +@@ -2794,11 +2862,15 @@ static const struct dsa_switch_ops mt753 + .port_change_mtu = mt7530_port_change_mtu, + .port_max_mtu = mt7530_port_max_mtu, + .port_stp_state_set = mt7530_stp_state_set, ++ .port_egress_floods = mt7530_port_egress_floods, + .port_bridge_join = mt7530_port_bridge_join, + .port_bridge_leave = mt7530_port_bridge_leave, + .port_fdb_add = mt7530_port_fdb_add, + .port_fdb_del = mt7530_port_fdb_del, + .port_fdb_dump = mt7530_port_fdb_dump, ++ .port_mdb_prepare = mt7530_port_mdb_prepare, ++ .port_mdb_add = mt7530_port_mdb_add, ++ .port_mdb_del = mt7530_port_mdb_del, + .port_vlan_filtering = mt7530_port_vlan_filtering, + .port_vlan_prepare = mt7530_port_vlan_prepare, + .port_vlan_add = mt7530_port_vlan_add, +--- a/net/dsa/tag_mtk.c ++++ b/net/dsa/tag_mtk.c +@@ -24,9 +24,6 @@ static struct sk_buff *mtk_tag_xmit(stru + struct dsa_port *dp = dsa_slave_to_port(dev); + u8 xmit_tpid; + u8 *mtk_tag; +- unsigned char *dest = eth_hdr(skb)->h_dest; +- bool is_multicast_skb = is_multicast_ether_addr(dest) && +- !is_broadcast_ether_addr(dest); + + /* Build the special tag after the MAC Source Address. If VLAN header + * is present, it's required that VLAN header and special tag is +@@ -55,10 +52,6 @@ static struct sk_buff *mtk_tag_xmit(stru + mtk_tag[0] = xmit_tpid; + mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK; + +- /* Disable SA learning for multicast frames */ +- if (unlikely(is_multicast_skb)) +- mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS; +- + /* Tag control information is kept for 802.1Q */ + if (xmit_tpid == MTK_HDR_XMIT_UNTAGGED) { + mtk_tag[2] = 0; +@@ -74,9 +67,6 @@ static struct sk_buff *mtk_tag_rcv(struc + u16 hdr; + int port; + __be16 *phdr; +- unsigned char *dest = eth_hdr(skb)->h_dest; +- bool is_multicast_skb = is_multicast_ether_addr(dest) && +- !is_broadcast_ether_addr(dest); + + if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN))) + return NULL; +@@ -102,9 +92,7 @@ static struct sk_buff *mtk_tag_rcv(struc + if (!skb->dev) + return NULL; + +- /* Only unicast or broadcast frames are offloaded */ +- if (likely(!is_multicast_skb)) +- dsa_default_offload_fwd_mark(skb); ++ dsa_default_offload_fwd_mark(skb); + + return skb; + } diff --git a/target/linux/generic/backport-5.15/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch b/target/linux/generic/backport-5.15/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch new file mode 100644 index 0000000000..67e3ca91ed --- /dev/null +++ b/target/linux/generic/backport-5.15/771-v5.14-net-phy-add-MediaTek-Gigabit-Ethernet-PHY-driver.patch @@ -0,0 +1,159 @@ +From e40d2cca01893c1941f5959b14bb0cd0d4f4d099 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 19 May 2021 11:31:59 +0800 +Subject: [PATCH] net: phy: add MediaTek Gigabit Ethernet PHY driver + +Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and +MT7531 switches. +The initialization procedure is from the vendor driver, but due to lack +of documentation, the function of some register values remains unknown. + +Signed-off-by: DENG Qingfang +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 5 ++ + drivers/net/phy/Makefile | 1 + + drivers/net/phy/mediatek-ge.c | 116 ++++++++++++++++++++++++++++++++++ + 3 files changed, 122 insertions(+) + create mode 100644 drivers/net/phy/mediatek-ge.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -201,6 +201,11 @@ config MARVELL_10G_PHY + help + Support for the Marvell Alaska MV88X3310 and compatible PHYs. + ++config MEDIATEK_GE_PHY ++ tristate "MediaTek PHYs" ++ help ++ Supports the MediaTek switch integrated PHYs. ++ + config MICREL_PHY + tristate "Micrel PHYs" + help +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -63,6 +63,7 @@ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c + obj-$(CONFIG_LXT_PHY) += lxt.o + obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o + obj-$(CONFIG_MARVELL_PHY) += marvell.o ++obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o + obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o + obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o + obj-$(CONFIG_MICREL_PHY) += micrel.o +--- /dev/null ++++ b/drivers/net/phy/mediatek-ge.c +@@ -0,0 +1,113 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++#include ++#include ++#include ++ ++#define MTK_T10_TEST_CONTROL 0x145 ++#define MTK_PHY_TP_MASK GENMASK(4, 3) ++#define MTK_PHY_TP_AUTO 0 ++#define MTK_PHY_TP_MDI 2 ++#define MTK_PHY_TP_MDIX 3 ++ ++#define MTK_EXT_PAGE_ACCESS 0x1f ++#define MTK_PHY_PAGE_STANDARD 0x0000 ++#define MTK_PHY_PAGE_EXTENDED 0x0001 ++#define MTK_PHY_PAGE_EXTENDED_2 0x0002 ++#define MTK_PHY_PAGE_EXTENDED_3 0x0003 ++#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 ++#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 ++ ++static int mtk_gephy_read_page(struct phy_device *phydev) ++{ ++ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); ++} ++ ++static int mtk_gephy_write_page(struct phy_device *phydev, int page) ++{ ++ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); ++} ++ ++static void mtk_gephy_config_init(struct phy_device *phydev) ++{ ++ /* Disable EEE */ ++ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); ++ ++ /* Enable HW auto downshift */ ++ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4)); ++ ++ /* Increase SlvDPSready time */ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ __phy_write(phydev, 0x10, 0xafae); ++ __phy_write(phydev, 0x12, 0x2f); ++ __phy_write(phydev, 0x10, 0x8fae); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ /* Adjust 100_mse_threshold */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff); ++ ++ /* Disable mcc */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300); ++} ++ ++static int mt7530_phy_config_init(struct phy_device *phydev) ++{ ++ mtk_gephy_config_init(phydev); ++ ++ /* Increase post_update_timer */ ++ phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b); ++ ++ return 0; ++} ++ ++static int mt7531_phy_config_init(struct phy_device *phydev) ++{ ++ mtk_gephy_config_init(phydev); ++ ++ /* PHY link down power saving enable */ ++ phy_set_bits(phydev, 0x17, BIT(4)); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300); ++ ++ /* Set TX Pair delay selection */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404); ++ ++ return 0; ++} ++ ++static struct phy_driver mtk_gephy_driver[] = { ++ { ++ PHY_ID_MATCH_EXACT(0x03a29412), ++ .name = "MediaTek MT7530 PHY", ++ .config_init = mt7530_phy_config_init, ++ /* Interrupts are handled by the switch, not the PHY ++ * itself. ++ */ ++ .config_intr = genphy_no_config_intr, ++ .ack_interrupt = genphy_no_ack_interrupt, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_gephy_read_page, ++ .write_page = mtk_gephy_write_page, ++ }, ++ { ++ PHY_ID_MATCH_EXACT(0x03a29441), ++ .name = "MediaTek MT7531 PHY", ++ .config_init = mt7531_phy_config_init, ++ /* Interrupts are handled by the switch, not the PHY ++ * itself. ++ */ ++ .config_intr = genphy_no_config_intr, ++ .ack_interrupt = genphy_no_ack_interrupt, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_gephy_read_page, ++ .write_page = mtk_gephy_write_page, ++ }, ++}; ++ ++module_phy_driver(mtk_gephy_driver); ++ ++static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = { ++ { PHY_ID_MATCH_VENDOR(0x03a29400) }, ++ { } ++}; diff --git a/target/linux/generic/backport-5.15/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch b/target/linux/generic/backport-5.15/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch new file mode 100644 index 0000000000..9890015301 --- /dev/null +++ b/target/linux/generic/backport-5.15/772-v5.14-net-dsa-mt7530-add-interrupt-support.patch @@ -0,0 +1,425 @@ +From ba751e28d44255744a30190faad0ca09b455c44d Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Wed, 19 May 2021 11:32:00 +0800 +Subject: [PATCH] net: dsa: mt7530: add interrupt support + +Add support for MT7530 interrupt controller to handle internal PHYs. +In order to assign an IRQ number to each PHY, the registration of MDIO bus +is also done in this driver. + +Signed-off-by: DENG Qingfang +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 264 +++++++++++++++++++++++++++++++++++---- + drivers/net/dsa/mt7530.h | 20 ++- + 2 files changed, 256 insertions(+), 28 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -10,6 +10,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -602,18 +603,14 @@ mt7530_mib_reset(struct dsa_switch *ds) + mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); + } + +-static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) ++static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum) + { +- struct mt7530_priv *priv = ds->priv; +- + return mdiobus_read_nested(priv->bus, port, regnum); + } + +-static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, ++static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 val) + { +- struct mt7530_priv *priv = ds->priv; +- + return mdiobus_write_nested(priv->bus, port, regnum, val); + } + +@@ -791,9 +788,8 @@ out: + } + + static int +-mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum) ++mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum) + { +- struct mt7530_priv *priv = ds->priv; + int devad; + int ret; + +@@ -809,10 +805,9 @@ mt7531_ind_phy_read(struct dsa_switch *d + } + + static int +-mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum, ++mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 data) + { +- struct mt7530_priv *priv = ds->priv; + int devad; + int ret; + +@@ -828,6 +823,22 @@ mt7531_ind_phy_write(struct dsa_switch * + return ret; + } + ++static int ++mt753x_phy_read(struct mii_bus *bus, int port, int regnum) ++{ ++ struct mt7530_priv *priv = bus->priv; ++ ++ return priv->info->phy_read(priv, port, regnum); ++} ++ ++static int ++mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val) ++{ ++ struct mt7530_priv *priv = bus->priv; ++ ++ return priv->info->phy_write(priv, port, regnum, val); ++} ++ + static void + mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +@@ -1824,6 +1835,210 @@ mt7530_setup_gpio(struct mt7530_priv *pr + return devm_gpiochip_add_data(dev, gc, priv); + } + ++static irqreturn_t ++mt7530_irq_thread_fn(int irq, void *dev_id) ++{ ++ struct mt7530_priv *priv = dev_id; ++ bool handled = false; ++ u32 val; ++ int p; ++ ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); ++ mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); ++ mutex_unlock(&priv->bus->mdio_lock); ++ ++ for (p = 0; p < MT7530_NUM_PHYS; p++) { ++ if (BIT(p) & val) { ++ unsigned int irq; ++ ++ irq = irq_find_mapping(priv->irq_domain, p); ++ handle_nested_irq(irq); ++ handled = true; ++ } ++ } ++ ++ return IRQ_RETVAL(handled); ++} ++ ++static void ++mt7530_irq_mask(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ priv->irq_enable &= ~BIT(d->hwirq); ++} ++ ++static void ++mt7530_irq_unmask(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ priv->irq_enable |= BIT(d->hwirq); ++} ++ ++static void ++mt7530_irq_bus_lock(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++} ++ ++static void ++mt7530_irq_bus_sync_unlock(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); ++ mutex_unlock(&priv->bus->mdio_lock); ++} ++ ++static struct irq_chip mt7530_irq_chip = { ++ .name = KBUILD_MODNAME, ++ .irq_mask = mt7530_irq_mask, ++ .irq_unmask = mt7530_irq_unmask, ++ .irq_bus_lock = mt7530_irq_bus_lock, ++ .irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock, ++}; ++ ++static int ++mt7530_irq_map(struct irq_domain *domain, unsigned int irq, ++ irq_hw_number_t hwirq) ++{ ++ irq_set_chip_data(irq, domain->host_data); ++ irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq); ++ irq_set_nested_thread(irq, true); ++ irq_set_noprobe(irq); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops mt7530_irq_domain_ops = { ++ .map = mt7530_irq_map, ++ .xlate = irq_domain_xlate_onecell, ++}; ++ ++static void ++mt7530_setup_mdio_irq(struct mt7530_priv *priv) ++{ ++ struct dsa_switch *ds = priv->ds; ++ int p; ++ ++ for (p = 0; p < MT7530_NUM_PHYS; p++) { ++ if (BIT(p) & ds->phys_mii_mask) { ++ unsigned int irq; ++ ++ irq = irq_create_mapping(priv->irq_domain, p); ++ ds->slave_mii_bus->irq[p] = irq; ++ } ++ } ++} ++ ++static int ++mt7530_setup_irq(struct mt7530_priv *priv) ++{ ++ struct device *dev = priv->dev; ++ struct device_node *np = dev->of_node; ++ int ret; ++ ++ if (!of_property_read_bool(np, "interrupt-controller")) { ++ dev_info(dev, "no interrupt support\n"); ++ return 0; ++ } ++ ++ priv->irq = of_irq_get(np, 0); ++ if (priv->irq <= 0) { ++ dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq); ++ return priv->irq ? : -EINVAL; ++ } ++ ++ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, ++ &mt7530_irq_domain_ops, priv); ++ if (!priv->irq_domain) { ++ dev_err(dev, "failed to create IRQ domain\n"); ++ return -ENOMEM; ++ } ++ ++ /* This register must be set for MT7530 to properly fire interrupts */ ++ if (priv->id != ID_MT7531) ++ mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); ++ ++ ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, ++ IRQF_ONESHOT, KBUILD_MODNAME, priv); ++ if (ret) { ++ irq_domain_remove(priv->irq_domain); ++ dev_err(dev, "failed to request IRQ: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static void ++mt7530_free_mdio_irq(struct mt7530_priv *priv) ++{ ++ int p; ++ ++ for (p = 0; p < MT7530_NUM_PHYS; p++) { ++ if (BIT(p) & priv->ds->phys_mii_mask) { ++ unsigned int irq; ++ ++ irq = irq_find_mapping(priv->irq_domain, p); ++ irq_dispose_mapping(irq); ++ } ++ } ++} ++ ++static void ++mt7530_free_irq_common(struct mt7530_priv *priv) ++{ ++ free_irq(priv->irq, priv); ++ irq_domain_remove(priv->irq_domain); ++} ++ ++static void ++mt7530_free_irq(struct mt7530_priv *priv) ++{ ++ mt7530_free_mdio_irq(priv); ++ mt7530_free_irq_common(priv); ++} ++ ++static int ++mt7530_setup_mdio(struct mt7530_priv *priv) ++{ ++ struct dsa_switch *ds = priv->ds; ++ struct device *dev = priv->dev; ++ struct mii_bus *bus; ++ static int idx; ++ int ret; ++ ++ bus = devm_mdiobus_alloc(dev); ++ if (!bus) ++ return -ENOMEM; ++ ++ ds->slave_mii_bus = bus; ++ bus->priv = priv; ++ bus->name = KBUILD_MODNAME "-mii"; ++ snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); ++ bus->read = mt753x_phy_read; ++ bus->write = mt753x_phy_write; ++ bus->parent = dev; ++ bus->phy_mask = ~ds->phys_mii_mask; ++ ++ if (priv->irq) ++ mt7530_setup_mdio_irq(priv); ++ ++ ret = devm_mdiobus_register(dev, bus); ++ if (ret) { ++ dev_err(dev, "failed to register MDIO bus: %d\n", ret); ++ if (priv->irq) ++ mt7530_free_mdio_irq(priv); ++ } ++ ++ return ret; ++} ++ + static int + mt7530_setup(struct dsa_switch *ds) + { +@@ -2798,24 +3013,20 @@ static int + mt753x_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; ++ int ret = priv->info->sw_setup(ds); + +- return priv->info->sw_setup(ds); +-} +- +-static int +-mt753x_phy_read(struct dsa_switch *ds, int port, int regnum) +-{ +- struct mt7530_priv *priv = ds->priv; ++ if (ret) ++ return ret; + +- return priv->info->phy_read(ds, port, regnum); +-} ++ ret = mt7530_setup_irq(priv); ++ if (ret) ++ return ret; + +-static int +-mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) +-{ +- struct mt7530_priv *priv = ds->priv; ++ ret = mt7530_setup_mdio(priv); ++ if (ret && priv->irq) ++ mt7530_free_irq_common(priv); + +- return priv->info->phy_write(ds, port, regnum, val); ++ return ret; + } + + static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, +@@ -2852,8 +3063,6 @@ static const struct dsa_switch_ops mt753 + .get_tag_protocol = mtk_get_tag_protocol, + .setup = mt753x_setup, + .get_strings = mt7530_get_strings, +- .phy_read = mt753x_phy_read, +- .phy_write = mt753x_phy_write, + .get_ethtool_stats = mt7530_get_ethtool_stats, + .get_sset_count = mt7530_get_sset_count, + .set_ageing_time = mt7530_set_ageing_time, +@@ -3036,6 +3245,9 @@ mt7530_remove(struct mdio_device *mdiode + dev_err(priv->dev, "Failed to disable io pwr: %d\n", + ret); + ++ if (priv->irq) ++ mt7530_free_irq(priv); ++ + dsa_unregister_switch(priv->ds); + mutex_destroy(&priv->reg_mutex); + } +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -7,6 +7,7 @@ + #define __MT7530_H + + #define MT7530_NUM_PORTS 7 ++#define MT7530_NUM_PHYS 5 + #define MT7530_CPU_PORT 6 + #define MT7530_NUM_FDB_RECORDS 2048 + #define MT7530_ALL_MEMBERS 0xff +@@ -401,6 +402,12 @@ enum mt7531_sgmii_force_duplex { + #define SYS_CTRL_SW_RST BIT(1) + #define SYS_CTRL_REG_RST BIT(0) + ++/* Register for system interrupt */ ++#define MT7530_SYS_INT_EN 0x7008 ++ ++/* Register for system interrupt status */ ++#define MT7530_SYS_INT_STS 0x700c ++ + /* Register for PHY Indirect Access Control */ + #define MT7531_PHY_IAC 0x701C + #define MT7531_PHY_ACS_ST BIT(31) +@@ -722,6 +729,8 @@ static const char *p5_intf_modes(unsigne + } + } + ++struct mt7530_priv; ++ + /* struct mt753x_info - This is the main data structure for holding the specific + * part for each supported device + * @sw_setup: Holding the handler to a device initialization +@@ -746,8 +755,8 @@ struct mt753x_info { + enum mt753x_id id; + + int (*sw_setup)(struct dsa_switch *ds); +- int (*phy_read)(struct dsa_switch *ds, int port, int regnum); +- int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val); ++ int (*phy_read)(struct mt7530_priv *priv, int port, int regnum); ++ int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); + int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); + int (*cpu_port_config)(struct dsa_switch *ds, int port); + bool (*phy_mode_supported)(struct dsa_switch *ds, int port, +@@ -781,6 +790,10 @@ struct mt753x_info { + * registers + * @p6_interface Holding the current port 6 interface + * @p5_intf_sel: Holding the current port 5 interface select ++ * ++ * @irq: IRQ number of the switch ++ * @irq_domain: IRQ domain of the switch irq_chip ++ * @irq_enable: IRQ enable bits, synced to SYS_INT_EN + */ + struct mt7530_priv { + struct device *dev; +@@ -802,6 +815,9 @@ struct mt7530_priv { + struct mt7530_port ports[MT7530_NUM_PORTS]; + /* protect among processes for registers access*/ + struct mutex reg_mutex; ++ int irq; ++ struct irq_domain *irq_domain; ++ u32 irq_enable; + }; + + struct mt7530_hw_vlan_entry { diff --git a/target/linux/generic/backport-5.15/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch b/target/linux/generic/backport-5.15/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch new file mode 100644 index 0000000000..eb60134a1e --- /dev/null +++ b/target/linux/generic/backport-5.15/773-v5.18-1-net-dsa-Move-VLAN-filtering-syncing-out-of-dsa_switc.patch @@ -0,0 +1,83 @@ +From 7164a8cde4b42f76474088ccaf53f1e463d4e2f6 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Mon, 24 Jan 2022 22:09:43 +0100 +Subject: [PATCH 5.10 1/2] net: dsa: Move VLAN filtering syncing out of + dsa_switch_bridge_leave +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 381a730182f1d174e1950cd4e63e885b1c302051 upstream. + +Most of dsa_switch_bridge_leave was, in fact, dealing with the syncing +of VLAN filtering for switches on which that is a global +setting. Separate the two phases to prepare for the cross-chip related +bugfix in the following commit. + +Signed-off-by: Tobias Waldekranz +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +Signed-off-by: Marek Behún +--- + net/dsa/switch.c | 39 ++++++++++++++++++++++++++------------- + 1 file changed, 26 insertions(+), 13 deletions(-) + +--- a/net/dsa/switch.c ++++ b/net/dsa/switch.c +@@ -104,23 +104,12 @@ static int dsa_switch_bridge_join(struct + return 0; + } + +-static int dsa_switch_bridge_leave(struct dsa_switch *ds, +- struct dsa_notifier_bridge_info *info) ++static int dsa_switch_sync_vlan_filtering(struct dsa_switch *ds, ++ struct dsa_notifier_bridge_info *info) + { + bool unset_vlan_filtering = br_vlan_enabled(info->br); +- struct dsa_switch_tree *dst = ds->dst; + int err, i; + +- if (dst->index == info->tree_index && ds->index == info->sw_index && +- ds->ops->port_bridge_leave) +- ds->ops->port_bridge_leave(ds, info->port, info->br); +- +- if ((dst->index != info->tree_index || ds->index != info->sw_index) && +- ds->ops->crosschip_bridge_leave) +- ds->ops->crosschip_bridge_leave(ds, info->tree_index, +- info->sw_index, info->port, +- info->br); +- + /* If the bridge was vlan_filtering, the bridge core doesn't trigger an + * event for changing vlan_filtering setting upon slave ports leaving + * it. That is a good thing, because that lets us handle it and also +@@ -153,6 +142,30 @@ static int dsa_switch_bridge_leave(struc + if (err && err != EOPNOTSUPP) + return err; + } ++ ++ return 0; ++} ++ ++static int dsa_switch_bridge_leave(struct dsa_switch *ds, ++ struct dsa_notifier_bridge_info *info) ++{ ++ struct dsa_switch_tree *dst = ds->dst; ++ int err; ++ ++ if (dst->index == info->tree_index && ds->index == info->sw_index && ++ ds->ops->port_bridge_leave) ++ ds->ops->port_bridge_leave(ds, info->port, info->br); ++ ++ if ((dst->index != info->tree_index || ds->index != info->sw_index) && ++ ds->ops->crosschip_bridge_leave) ++ ds->ops->crosschip_bridge_leave(ds, info->tree_index, ++ info->sw_index, info->port, ++ info->br); ++ ++ err = dsa_switch_sync_vlan_filtering(ds, info); ++ if (err) ++ return err; ++ + return 0; + } + diff --git a/target/linux/generic/backport-5.15/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch b/target/linux/generic/backport-5.15/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch new file mode 100644 index 0000000000..0b36ef7cec --- /dev/null +++ b/target/linux/generic/backport-5.15/773-v5.18-2-net-dsa-Avoid-cross-chip-syncing-of-VLAN-filtering.patch @@ -0,0 +1,58 @@ +From 6948a6654ffc878fc0258b363da77e7fd775b2d9 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Mon, 24 Jan 2022 22:09:44 +0100 +Subject: [PATCH 5.10 2/2] net: dsa: Avoid cross-chip syncing of VLAN filtering +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +commit 108dc8741c203e9d6ce4e973367f1bac20c7192b upstream. + +Changes to VLAN filtering are not applicable to cross-chip +notifications. + +On a system like this: + +.-----. .-----. .-----. +| sw1 +---+ sw2 +---+ sw3 | +'-1-2-' '-1-2-' '-1-2-' + +Before this change, upon sw1p1 leaving a bridge, a call to +dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. + +In this scenario: + +.---------. .-----. .-----. +| sw1 +---+ sw2 +---+ sw3 | +'-1-2-3-4-' '-1-2-' '-1-2-' + +When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be +called for sw2 and sw3 with a non-existing port - leading to array +out-of-bounds accesses and crashes on mv88e6xxx. + +Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") +Signed-off-by: Tobias Waldekranz +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +Signed-off-by: Marek Behún +--- + net/dsa/switch.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/net/dsa/switch.c ++++ b/net/dsa/switch.c +@@ -162,9 +162,11 @@ static int dsa_switch_bridge_leave(struc + info->sw_index, info->port, + info->br); + +- err = dsa_switch_sync_vlan_filtering(ds, info); +- if (err) +- return err; ++ if (dst->index == info->tree_index && ds->index == info->sw_index) { ++ err = dsa_switch_sync_vlan_filtering(ds, info); ++ if (err) ++ return err; ++ } + + return 0; + } diff --git a/target/linux/generic/backport-5.15/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch b/target/linux/generic/backport-5.15/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch new file mode 100644 index 0000000000..d7df0685dd --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch @@ -0,0 +1,73 @@ +From 7c496de538eebd8212dc2a3c9a468386b264d0d4 Mon Sep 17 00:00:00 2001 +From: Sasha Neftin +Date: Wed, 7 Jul 2021 08:14:40 +0300 +Subject: igc: Remove _I_PHY_ID checking + +i225 devices have only one PHY vendor. There is no point checking +_I_PHY_ID during the link establishment and auto-negotiation process. +This patch comes to clean up these pointless checkings. + +Signed-off-by: Sasha Neftin +Tested-by: Dvora Fuxbrumer +Signed-off-by: Tony Nguyen +--- + drivers/net/ethernet/intel/igc/igc_base.c | 10 +--------- + drivers/net/ethernet/intel/igc/igc_main.c | 3 +-- + drivers/net/ethernet/intel/igc/igc_phy.c | 6 ++---- + 3 files changed, 4 insertions(+), 15 deletions(-) + +(limited to 'drivers/net/ethernet/intel/igc') + +--- a/drivers/net/ethernet/intel/igc/igc_base.c ++++ b/drivers/net/ethernet/intel/igc/igc_base.c +@@ -187,15 +187,7 @@ static s32 igc_init_phy_params_base(stru + + igc_check_for_copper_link(hw); + +- /* Verify phy id and set remaining function pointers */ +- switch (phy->id) { +- case I225_I_PHY_ID: +- phy->type = igc_phy_i225; +- break; +- default: +- ret_val = -IGC_ERR_PHY; +- goto out; +- } ++ phy->type = igc_phy_i225; + + out: + return ret_val; +--- a/drivers/net/ethernet/intel/igc/igc_main.c ++++ b/drivers/net/ethernet/intel/igc/igc_main.c +@@ -4189,8 +4189,7 @@ bool igc_has_link(struct igc_adapter *ad + break; + } + +- if (hw->mac.type == igc_i225 && +- hw->phy.id == I225_I_PHY_ID) { ++ if (hw->mac.type == igc_i225) { + if (!netif_carrier_ok(adapter->netdev)) { + adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE; + } else if (!(adapter->flags & IGC_FLAG_NEED_LINK_UPDATE)) { +--- a/drivers/net/ethernet/intel/igc/igc_phy.c ++++ b/drivers/net/ethernet/intel/igc/igc_phy.c +@@ -249,8 +249,7 @@ static s32 igc_phy_setup_autoneg(struct + return ret_val; + } + +- if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && +- hw->phy.id == I225_I_PHY_ID) { ++ if (phy->autoneg_mask & ADVERTISE_2500_FULL) { + /* Read the MULTI GBT AN Control Register - reg 7.32 */ + ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK << + MMD_DEVADDR_SHIFT) | +@@ -390,8 +389,7 @@ static s32 igc_phy_setup_autoneg(struct + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + +- if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && +- hw->phy.id == I225_I_PHY_ID) ++ if (phy->autoneg_mask & ADVERTISE_2500_FULL) + ret_val = phy->ops.write_reg(hw, + (STANDARD_AN_REG_MASK << + MMD_DEVADDR_SHIFT) | diff --git a/target/linux/generic/backport-5.15/774-v5.15-2-igc-remove-phy-type-checking.patch b/target/linux/generic/backport-5.15/774-v5.15-2-igc-remove-phy-type-checking.patch new file mode 100644 index 0000000000..ad4d1bb0dc --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.15-2-igc-remove-phy-type-checking.patch @@ -0,0 +1,43 @@ +From 47bca7de6a4fb8dcb564c7ca14d885c91ed19e03 Mon Sep 17 00:00:00 2001 +From: Sasha Neftin +Date: Sat, 10 Jul 2021 20:57:50 +0300 +Subject: igc: Remove phy->type checking + +i225 devices have only one phy->type: copper. There is no point checking +phy->type during the igc_has_link method from the watchdog that +invoked every 2 seconds. +This patch comes to clean up these pointless checkings. + +Signed-off-by: Sasha Neftin +Tested-by: Dvora Fuxbrumer +Signed-off-by: Tony Nguyen +--- + drivers/net/ethernet/intel/igc/igc_main.c | 15 ++++----------- + 1 file changed, 4 insertions(+), 11 deletions(-) + +(limited to 'drivers/net/ethernet/intel/igc') + +--- a/drivers/net/ethernet/intel/igc/igc_main.c ++++ b/drivers/net/ethernet/intel/igc/igc_main.c +@@ -4177,17 +4177,10 @@ bool igc_has_link(struct igc_adapter *ad + * false until the igc_check_for_link establishes link + * for copper adapters ONLY + */ +- switch (hw->phy.media_type) { +- case igc_media_type_copper: +- if (!hw->mac.get_link_status) +- return true; +- hw->mac.ops.check_for_link(hw); +- link_active = !hw->mac.get_link_status; +- break; +- default: +- case igc_media_type_unknown: +- break; +- } ++ if (!hw->mac.get_link_status) ++ return true; ++ hw->mac.ops.check_for_link(hw); ++ link_active = !hw->mac.get_link_status; + + if (hw->mac.type == igc_i225) { + if (!netif_carrier_ok(adapter->netdev)) { diff --git a/target/linux/generic/backport-5.15/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch b/target/linux/generic/backport-5.15/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch new file mode 100644 index 0000000000..bec2867a48 --- /dev/null +++ b/target/linux/generic/backport-5.15/780-v5.11-net-usb-r8152-Provide-missing-documentation-for-some.patch @@ -0,0 +1,72 @@ +From 586f04ce6a391419ca3cc9cef6b6f38570cede88 Mon Sep 17 00:00:00 2001 +From: Lee Jones +Date: Mon, 2 Nov 2020 11:45:04 +0000 +Subject: [PATCH] net: usb: r8152: Provide missing documentation for + some struct members + +commit 34e653efb602e0651867fb5ab14369b555a61dcd upstream. + +Fixes the following W=1 kernel build warning(s): + + drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac' + drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac' + drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key' + drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key' + drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc' + drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc' + drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc' + drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc' + +Signed-off-by: Lee Jones +Acked-by: Hayes Wang +Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -899,6 +899,7 @@ struct fw_header { + * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. + * The layout of the firmware block is: + * + + . ++ * @blk_hdr: firmware descriptor (type, length) + * @fw_offset: offset of the firmware binary data. The start address of + * the data would be the address of struct fw_mac + @fw_offset. + * @fw_reg: the register to load the firmware. Depends on chip. +@@ -912,6 +913,7 @@ struct fw_header { + * @bp_num: the break point number which needs to be set for this firmware. + * Depends on the firmware. + * @bp: break points. Depends on firmware. ++ * @reserved: reserved space (unused) + * @fw_ver_reg: the register to store the fw version. + * @fw_ver_data: the firmware version of the current type. + * @info: additional information for debugging, and is followed by the +@@ -937,8 +939,10 @@ struct fw_mac { + /** + * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START. + * This is used to set patch key when loading the firmware of PHY. ++ * @blk_hdr: firmware descriptor (type, length) + * @key_reg: the register to write the patch key. + * @key_data: patch key. ++ * @reserved: reserved space (unused) + */ + struct fw_phy_patch_key { + struct fw_block blk_hdr; +@@ -951,6 +955,7 @@ struct fw_phy_patch_key { + * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC. + * The layout of the firmware block is: + * + + . ++ * @blk_hdr: firmware descriptor (type, length) + * @fw_offset: offset of the firmware binary data. The start address of + * the data would be the address of struct fw_phy_nc + @fw_offset. + * @fw_reg: the register to load the firmware. Depends on chip. +@@ -961,6 +966,7 @@ struct fw_phy_patch_key { + * @mode_reg: the regitster of switching the mode. + * @mod_pre: the mode needing to be set before loading the firmware. + * @mod_post: the mode to be set when finishing to load the firmware. ++ * @reserved: reserved space (unused) + * @bp_start: the start register of break points. Depends on chip. + * @bp_num: the break point number which needs to be set for this firmware. + * Depends on the firmware. diff --git a/target/linux/generic/backport-5.15/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch b/target/linux/generic/backport-5.15/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch new file mode 100644 index 0000000000..aa2763e7de --- /dev/null +++ b/target/linux/generic/backport-5.15/781-v5.11-net-usb-r8152-Fix-a-couple-of-spelling-errors-in-fw_.patch @@ -0,0 +1,34 @@ +From 5fcfa846181de6676509696c4cd7b60a22e74077 Mon Sep 17 00:00:00 2001 +From: Lee Jones +Date: Mon, 2 Nov 2020 11:45:09 +0000 +Subject: [PATCH] net: usb: r8152: Fix a couple of spelling errors in + fw_phy_nc's docs + +commit 9f07814d01ad085b2d9f1d55b4ce532fb2c27110 upstream. + +Fixes the following W=1 kernel build warning(s): + + drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc' + drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc' + +Signed-off-by: Lee Jones +Acked-by: Hayes Wang +Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -964,8 +964,8 @@ struct fw_phy_patch_key { + * @patch_en_addr: the register of enabling patch mode. Depends on chip. + * @patch_en_value: patch mode enabled mask. Depends on the firmware. + * @mode_reg: the regitster of switching the mode. +- * @mod_pre: the mode needing to be set before loading the firmware. +- * @mod_post: the mode to be set when finishing to load the firmware. ++ * @mode_pre: the mode needing to be set before loading the firmware. ++ * @mode_post: the mode to be set when finishing to load the firmware. + * @reserved: reserved space (unused) + * @bp_start: the start register of break points. Depends on chip. + * @bp_num: the break point number which needs to be set for this firmware. diff --git a/target/linux/generic/backport-5.15/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch b/target/linux/generic/backport-5.15/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch new file mode 100644 index 0000000000..789de8e6fd --- /dev/null +++ b/target/linux/generic/backport-5.15/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch @@ -0,0 +1,320 @@ +From 0ef50460f7f053bd2a911ec53e01bfda646a5574 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Wed, 4 Nov 2020 10:19:22 +0800 +Subject: [PATCH] net/usb/r8153_ecm: support ECM mode for RTL8153 + +commit c1aedf015ebdd0232757a66e2daccf1246bd609c upstream. + +Support ECM mode based on cdc_ether with relative mii functions, +when CONFIG_USB_RTL8152 is not set, or the device is not supported +by r8152 driver. + +Both r8152 and r8153_ecm would check the return value of +rtl8152_get_version() in porbe(). If rtl8152_get_version() +return none zero value, the r8152 is used for the device +with vendor mode. Otherwise, the r8153_ecm is used for the +device with ECM mode. + +Signed-off-by: Hayes Wang +Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/Makefile | 2 +- + drivers/net/usb/r8152.c | 30 +------ + drivers/net/usb/r8153_ecm.c | 162 ++++++++++++++++++++++++++++++++++++ + include/linux/usb/r8152.h | 37 ++++++++ + 4 files changed, 204 insertions(+), 27 deletions(-) + create mode 100644 drivers/net/usb/r8153_ecm.c + create mode 100644 include/linux/usb/r8152.h + +--- a/drivers/net/usb/Makefile ++++ b/drivers/net/usb/Makefile +@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o + obj-$(CONFIG_USB_NET_AX8817X) += asix.o + asix-y := asix_devices.o asix_common.o ax88172a.o + obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o +-obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o ++obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o + obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o + obj-$(CONFIG_USB_NET_DM9601) += dm9601.o + obj-$(CONFIG_USB_NET_SR9700) += sr9700.o +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + + /* Information for net-next */ + #define NETNEXT_VERSION "11" +@@ -654,18 +655,6 @@ enum rtl_register_content { + + #define INTR_LINK 0x0004 + +-#define RTL8152_REQT_READ 0xc0 +-#define RTL8152_REQT_WRITE 0x40 +-#define RTL8152_REQ_GET_REGS 0x05 +-#define RTL8152_REQ_SET_REGS 0x05 +- +-#define BYTE_EN_DWORD 0xff +-#define BYTE_EN_WORD 0x33 +-#define BYTE_EN_BYTE 0x11 +-#define BYTE_EN_SIX_BYTES 0x3f +-#define BYTE_EN_START_MASK 0x0f +-#define BYTE_EN_END_MASK 0xf0 +- + #define RTL8153_MAX_PACKET 9216 /* 9K */ + #define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \ + ETH_FCS_LEN) +@@ -690,21 +679,9 @@ enum rtl8152_flags { + LENOVO_MACPASSTHRU, + }; + +-/* Define these values to match your device */ +-#define VENDOR_ID_REALTEK 0x0bda +-#define VENDOR_ID_MICROSOFT 0x045e +-#define VENDOR_ID_SAMSUNG 0x04e8 +-#define VENDOR_ID_LENOVO 0x17ef +-#define VENDOR_ID_LINKSYS 0x13b1 +-#define VENDOR_ID_NVIDIA 0x0955 +-#define VENDOR_ID_TPLINK 0x2357 +- + #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082 + #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2 0xa387 + +-#define MCU_TYPE_PLA 0x0100 +-#define MCU_TYPE_USB 0x0000 +- + struct tally_counter { + __le64 tx_packets; + __le64 rx_packets; +@@ -6625,7 +6602,7 @@ static int rtl_fw_init(struct r8152 *tp) + return 0; + } + +-static u8 rtl_get_version(struct usb_interface *intf) ++u8 rtl8152_get_version(struct usb_interface *intf) + { + struct usb_device *udev = interface_to_usbdev(intf); + u32 ocp_data = 0; +@@ -6683,12 +6660,13 @@ static u8 rtl_get_version(struct usb_int + + return version; + } ++EXPORT_SYMBOL_GPL(rtl8152_get_version); + + static int rtl8152_probe(struct usb_interface *intf, + const struct usb_device_id *id) + { + struct usb_device *udev = interface_to_usbdev(intf); +- u8 version = rtl_get_version(intf); ++ u8 version = rtl8152_get_version(intf); + struct r8152 *tp; + struct net_device *netdev; + int ret; +--- /dev/null ++++ b/drivers/net/usb/r8153_ecm.c +@@ -0,0 +1,162 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define OCP_BASE 0xe86c ++ ++static int pla_read_word(struct usbnet *dev, u16 index) ++{ ++ u16 byen = BYTE_EN_WORD; ++ u8 shift = index & 2; ++ __le32 tmp; ++ int ret; ++ ++ if (shift) ++ byen <<= shift; ++ ++ index &= ~3; ++ ++ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, ++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); ++ if (ret < 0) ++ goto out; ++ ++ ret = __le32_to_cpu(tmp); ++ ret >>= (shift * 8); ++ ret &= 0xffff; ++ ++out: ++ return ret; ++} ++ ++static int pla_write_word(struct usbnet *dev, u16 index, u32 data) ++{ ++ u32 mask = 0xffff; ++ u16 byen = BYTE_EN_WORD; ++ u8 shift = index & 2; ++ __le32 tmp; ++ int ret; ++ ++ data &= mask; ++ ++ if (shift) { ++ byen <<= shift; ++ mask <<= (shift * 8); ++ data <<= (shift * 8); ++ } ++ ++ index &= ~3; ++ ++ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, ++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); ++ ++ if (ret < 0) ++ goto out; ++ ++ data |= __le32_to_cpu(tmp) & ~mask; ++ tmp = __cpu_to_le32(data); ++ ++ ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index, ++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); ++ ++out: ++ return ret; ++} ++ ++static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg) ++{ ++ struct usbnet *dev = netdev_priv(netdev); ++ int ret; ++ ++ ret = pla_write_word(dev, OCP_BASE, 0xa000); ++ if (ret < 0) ++ goto out; ++ ++ ret = pla_read_word(dev, 0xb400 + reg * 2); ++ ++out: ++ return ret; ++} ++ ++static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) ++{ ++ struct usbnet *dev = netdev_priv(netdev); ++ int ret; ++ ++ ret = pla_write_word(dev, OCP_BASE, 0xa000); ++ if (ret < 0) ++ return; ++ ++ ret = pla_write_word(dev, 0xb400 + reg * 2, val); ++} ++ ++static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) ++{ ++ int status; ++ ++ status = usbnet_cdc_bind(dev, intf); ++ if (status < 0) ++ return status; ++ ++ dev->mii.dev = dev->net; ++ dev->mii.mdio_read = r8153_ecm_mdio_read; ++ dev->mii.mdio_write = r8153_ecm_mdio_write; ++ dev->mii.reg_num_mask = 0x1f; ++ dev->mii.supports_gmii = 1; ++ ++ return status; ++} ++ ++static const struct driver_info r8153_info = { ++ .description = "RTL8153 ECM Device", ++ .flags = FLAG_ETHER, ++ .bind = r8153_bind, ++ .unbind = usbnet_cdc_unbind, ++ .status = usbnet_cdc_status, ++ .manage_power = usbnet_manage_power, ++}; ++ ++static const struct usb_device_id products[] = { ++{ ++ USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM, ++ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), ++ .driver_info = (unsigned long)&r8153_info, ++}, ++ ++ { }, /* END */ ++}; ++MODULE_DEVICE_TABLE(usb, products); ++ ++static int rtl8153_ecm_probe(struct usb_interface *intf, ++ const struct usb_device_id *id) ++{ ++#if IS_REACHABLE(CONFIG_USB_RTL8152) ++ if (rtl8152_get_version(intf)) ++ return -ENODEV; ++#endif ++ ++ return usbnet_probe(intf, id); ++} ++ ++static struct usb_driver r8153_ecm_driver = { ++ .name = "r8153_ecm", ++ .id_table = products, ++ .probe = rtl8153_ecm_probe, ++ .disconnect = usbnet_disconnect, ++ .suspend = usbnet_suspend, ++ .resume = usbnet_resume, ++ .reset_resume = usbnet_resume, ++ .supports_autosuspend = 1, ++ .disable_hub_initiated_lpm = 1, ++}; ++ ++module_usb_driver(r8153_ecm_driver); ++ ++MODULE_AUTHOR("Hayes Wang"); ++MODULE_DESCRIPTION("Realtek USB ECM device"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/include/linux/usb/r8152.h +@@ -0,0 +1,37 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++/* ++ * Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved. ++ */ ++ ++#ifndef __LINUX_R8152_H ++#define __LINUX_R8152_H ++ ++#define RTL8152_REQT_READ 0xc0 ++#define RTL8152_REQT_WRITE 0x40 ++#define RTL8152_REQ_GET_REGS 0x05 ++#define RTL8152_REQ_SET_REGS 0x05 ++ ++#define BYTE_EN_DWORD 0xff ++#define BYTE_EN_WORD 0x33 ++#define BYTE_EN_BYTE 0x11 ++#define BYTE_EN_SIX_BYTES 0x3f ++#define BYTE_EN_START_MASK 0x0f ++#define BYTE_EN_END_MASK 0xf0 ++ ++#define MCU_TYPE_PLA 0x0100 ++#define MCU_TYPE_USB 0x0000 ++ ++/* Define these values to match your device */ ++#define VENDOR_ID_REALTEK 0x0bda ++#define VENDOR_ID_MICROSOFT 0x045e ++#define VENDOR_ID_SAMSUNG 0x04e8 ++#define VENDOR_ID_LENOVO 0x17ef ++#define VENDOR_ID_LINKSYS 0x13b1 ++#define VENDOR_ID_NVIDIA 0x0955 ++#define VENDOR_ID_TPLINK 0x2357 ++ ++#if IS_REACHABLE(CONFIG_USB_RTL8152) ++extern u8 rtl8152_get_version(struct usb_interface *intf); ++#endif ++ ++#endif /* __LINUX_R8152_H */ diff --git a/target/linux/generic/backport-5.15/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch b/target/linux/generic/backport-5.15/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch new file mode 100644 index 0000000000..b625d5ea99 --- /dev/null +++ b/target/linux/generic/backport-5.15/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch @@ -0,0 +1,41 @@ +From 90f1afc7f96c8f7cf19c82e5f4b39e61a63b053d Mon Sep 17 00:00:00 2001 +From: Emil Renner Berthing +Date: Sun, 31 Jan 2021 00:47:29 +0100 +Subject: [PATCH] net: usb: r8152: use new tasklet API + +commit f3163f1cb87141c7a41a15a5d4c98b353f807b04 upstream. + +This converts the driver to use the new tasklet API introduced in +commit 12cc923f1ccc ("tasklet: Introduce new initialization API") + +Signed-off-by: Emil Renner Berthing +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -2394,11 +2394,9 @@ static void tx_bottom(struct r8152 *tp) + } while (res == 0); + } + +-static void bottom_half(unsigned long data) ++static void bottom_half(struct tasklet_struct *t) + { +- struct r8152 *tp; +- +- tp = (struct r8152 *)data; ++ struct r8152 *tp = from_tasklet(tp, t, tx_tl); + + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return; +@@ -6718,7 +6716,7 @@ static int rtl8152_probe(struct usb_inte + mutex_init(&tp->control); + INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); + INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t); +- tasklet_init(&tp->tx_tl, bottom_half, (unsigned long)tp); ++ tasklet_setup(&tp->tx_tl, bottom_half); + tasklet_disable(&tp->tx_tl); + + netdev->netdev_ops = &rtl8152_netdev_ops; diff --git a/target/linux/generic/backport-5.15/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch b/target/linux/generic/backport-5.15/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch new file mode 100644 index 0000000000..bbb2b5c0c9 --- /dev/null +++ b/target/linux/generic/backport-5.15/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch @@ -0,0 +1,198 @@ +From 86b98abf4f8c691c260c5113d6a2d32f5377caca Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Wed, 3 Feb 2021 17:14:28 +0800 +Subject: [PATCH] r8152: replace several functions about phy patch + request + +commit a08c0d309d8c078d22717d815cf9853f6f2c07bd upstream. + +Replace r8153_patch_request() with rtl_phy_patch_request(). +Replace r8153_pre_ram_code() with rtl_pre_ram_code(). +Replace r8153_post_ram_code() with rtl_post_ram_code(). +Add rtl_patch_key_set(). + +The new functions have an additional parameter. It is used to wait +the patch request command finished. When the PHY is resumed from +the state of power cut, the PHY is at a safe mode and the +OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is +safe to set patch request command without waiting OCP_PHY_PATCH_STAT. + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 84 ++++++++++++++++++++++++----------------- + 1 file changed, 50 insertions(+), 34 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -3444,59 +3444,76 @@ static void rtl_clear_bp(struct r8152 *t + ocp_write_word(tp, type, PLA_BP_BA, 0); + } + +-static int r8153_patch_request(struct r8152 *tp, bool request) ++static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait) + { +- u16 data; ++ u16 data, check; + int i; + + data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD); +- if (request) ++ if (request) { + data |= PATCH_REQUEST; +- else ++ check = 0; ++ } else { + data &= ~PATCH_REQUEST; ++ check = PATCH_READY; ++ } + ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data); + +- for (i = 0; request && i < 5000; i++) { ++ for (i = 0; wait && i < 5000; i++) { ++ u32 ocp_data; ++ + usleep_range(1000, 2000); +- if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY) ++ ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT); ++ if ((ocp_data & PATCH_READY) ^ check) + break; + } + +- if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { +- netif_err(tp, drv, tp->netdev, "patch request fail\n"); +- r8153_patch_request(tp, false); ++ if (request && wait && ++ !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { ++ dev_err(&tp->intf->dev, "PHY patch request fail\n"); ++ rtl_phy_patch_request(tp, false, false); + return -ETIME; + } else { + return 0; + } + } + +-static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key) ++static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key) + { +- if (r8153_patch_request(tp, true)) { +- dev_err(&tp->intf->dev, "patch request fail\n"); +- return -ETIME; +- } ++ if (patch_key && key_addr) { ++ sram_write(tp, key_addr, patch_key); ++ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); ++ } else if (key_addr) { ++ u16 data; + +- sram_write(tp, key_addr, patch_key); +- sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK); ++ sram_write(tp, 0x0000, 0x0000); + +- return 0; ++ data = ocp_reg_read(tp, OCP_PHY_LOCK); ++ data &= ~PATCH_LOCK; ++ ocp_reg_write(tp, OCP_PHY_LOCK, data); ++ ++ sram_write(tp, key_addr, 0x0000); ++ } else { ++ WARN_ON_ONCE(1); ++ } + } + +-static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr) ++static int ++rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait) + { +- u16 data; ++ if (rtl_phy_patch_request(tp, true, wait)) ++ return -ETIME; + +- sram_write(tp, 0x0000, 0x0000); ++ rtl_patch_key_set(tp, key_addr, patch_key); + +- data = ocp_reg_read(tp, OCP_PHY_LOCK); +- data &= ~PATCH_LOCK; +- ocp_reg_write(tp, OCP_PHY_LOCK, data); ++ return 0; ++} + +- sram_write(tp, key_addr, 0x0000); ++static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait) ++{ ++ rtl_patch_key_set(tp, key_addr, 0); + +- r8153_patch_request(tp, false); ++ rtl_phy_patch_request(tp, false, wait); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); + +@@ -3981,7 +3998,7 @@ static void rtl8152_fw_mac_apply(struct + dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info); + } + +-static void rtl8152_apply_firmware(struct r8152 *tp) ++static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut) + { + struct rtl_fw *rtl_fw = &tp->rtl_fw; + const struct firmware *fw; +@@ -4012,12 +4029,11 @@ static void rtl8152_apply_firmware(struc + case RTL_FW_PHY_START: + key = (struct fw_phy_patch_key *)block; + key_addr = __le16_to_cpu(key->key_reg); +- r8153_pre_ram_code(tp, key_addr, +- __le16_to_cpu(key->key_data)); ++ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut); + break; + case RTL_FW_PHY_STOP: + WARN_ON(!key_addr); +- r8153_post_ram_code(tp, key_addr); ++ rtl_post_ram_code(tp, key_addr, !power_cut); + break; + case RTL_FW_PHY_NC: + rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block); +@@ -4222,7 +4238,7 @@ static void rtl8152_disable(struct r8152 + + static void r8152b_hw_phy_cfg(struct r8152 *tp) + { +- rtl8152_apply_firmware(tp); ++ rtl8152_apply_firmware(tp, false); + rtl_eee_enable(tp, tp->eee_en); + r8152_aldps_en(tp, true); + r8152b_enable_fc(tp); +@@ -4504,7 +4520,7 @@ static void r8153_hw_phy_cfg(struct r815 + /* disable EEE before updating the PHY parameters */ + rtl_eee_enable(tp, false); + +- rtl8152_apply_firmware(tp); ++ rtl8152_apply_firmware(tp, false); + + if (tp->version == RTL_VER_03) { + data = ocp_reg_read(tp, OCP_EEE_CFG); +@@ -4578,7 +4594,7 @@ static void r8153b_hw_phy_cfg(struct r81 + /* disable EEE before updating the PHY parameters */ + rtl_eee_enable(tp, false); + +- rtl8152_apply_firmware(tp); ++ rtl8152_apply_firmware(tp, false); + + r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); + +@@ -4619,7 +4635,7 @@ static void r8153b_hw_phy_cfg(struct r81 + ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); + + /* Advnace EEE */ +- if (!r8153_patch_request(tp, true)) { ++ if (!rtl_phy_patch_request(tp, true, true)) { + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EEE_CLKDIV_EN; + ocp_reg_write(tp, OCP_POWER_CFG, data); +@@ -4636,7 +4652,7 @@ static void r8153b_hw_phy_cfg(struct r81 + ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5)); + tp->ups_info._250m_ckdiv = true; + +- r8153_patch_request(tp, false); ++ rtl_phy_patch_request(tp, false, true); + } + + if (tp->eee_en) diff --git a/target/linux/generic/backport-5.15/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch b/target/linux/generic/backport-5.15/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch new file mode 100644 index 0000000000..b28e89a43f --- /dev/null +++ b/target/linux/generic/backport-5.15/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch @@ -0,0 +1,134 @@ +From 29a61d8564ad3439d03c7ec135016a4e70072af1 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Wed, 3 Feb 2021 17:14:29 +0800 +Subject: [PATCH] r8152: adjust the flow of power cut for RTL8153B + +commit 80fd850b31f09263ad175b2f640d5c5c6f76ed41 upstream. + +For runtime resuming, the RTL8153B may be resumed from the state +of power cut, when enabling the feature of UPS. Then, the PHY +would be reset, so it is necessary to be initailized again. + +Besides, the USB_U1U2_TIMER also has to be set again, so I move +it from r8153b_init() to r8153b_hw_phy_cfg(). + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++----------------- + 1 file changed, 40 insertions(+), 28 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -1372,6 +1372,10 @@ void write_mii_word(struct net_device *n + static int + r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); + ++static int ++rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, ++ u32 advertising); ++ + static int rtl8152_set_mac_address(struct net_device *netdev, void *p) + { + struct r8152 *tp = netdev_priv(netdev); +@@ -3183,8 +3187,6 @@ static void r8153b_ups_en(struct r8152 * + ocp_data |= BIT(0); + ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); + } else { +- u16 data; +- + ocp_data &= ~(UPS_EN | USP_PREWAKE); + ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + +@@ -3192,31 +3194,20 @@ static void r8153b_ups_en(struct r8152 * + ocp_data &= ~BIT(0); + ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); + +- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); +- ocp_data &= ~PCUT_STATUS; +- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); ++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { ++ int i; + +- data = r8153_phy_status(tp, 0); ++ for (i = 0; i < 500; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & ++ AUTOLOAD_DONE) ++ break; ++ msleep(20); ++ } + +- switch (data) { +- case PHY_STAT_PWRDN: +- case PHY_STAT_EXT_INIT: +- r8153b_green_en(tp, +- test_bit(GREEN_ETHERNET, &tp->flags)); +- +- data = r8152_mdio_read(tp, MII_BMCR); +- data &= ~BMCR_PDOWN; +- data |= BMCR_RESET; +- r8152_mdio_write(tp, MII_BMCR, data); ++ tp->rtl_ops.hw_phy_cfg(tp); + +- data = r8153_phy_status(tp, PHY_STAT_LAN_ON); +- fallthrough; +- +- default: +- if (data != PHY_STAT_LAN_ON) +- netif_warn(tp, link, tp->netdev, +- "PHY not ready"); +- break; ++ rtl8152_set_speed(tp, tp->autoneg, tp->speed, ++ tp->duplex, tp->advertising); + } + } + } +@@ -4588,13 +4579,37 @@ static void r8153b_hw_phy_cfg(struct r81 + u32 ocp_data; + u16 data; + ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); ++ if (ocp_data & PCUT_STATUS) { ++ ocp_data &= ~PCUT_STATUS; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); ++ } ++ + /* disable ALDPS before updating the PHY parameters */ + r8153_aldps_en(tp, false); + + /* disable EEE before updating the PHY parameters */ + rtl_eee_enable(tp, false); + +- rtl8152_apply_firmware(tp, false); ++ /* U1/U2/L1 idle timer. 500 us */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); ++ ++ data = r8153_phy_status(tp, 0); ++ ++ switch (data) { ++ case PHY_STAT_PWRDN: ++ case PHY_STAT_EXT_INIT: ++ rtl8152_apply_firmware(tp, true); ++ ++ data = r8152_mdio_read(tp, MII_BMCR); ++ data &= ~BMCR_PDOWN; ++ r8152_mdio_write(tp, MII_BMCR, data); ++ break; ++ case PHY_STAT_LAN_ON: ++ default: ++ rtl8152_apply_firmware(tp, false); ++ break; ++ } + + r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); + +@@ -5543,9 +5558,6 @@ static void r8153b_init(struct r8152 *tp + /* MSC timer = 0xfff * 8ms = 32760 ms */ + ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); + +- /* U1/U2/L1 idle timer. 500 us */ +- ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); +- + r8153b_power_cut_en(tp, false); + r8153b_ups_en(tp, false); + r8153_queue_wake(tp, false); diff --git a/target/linux/generic/backport-5.15/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch b/target/linux/generic/backport-5.15/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch new file mode 100644 index 0000000000..8cf91c3893 --- /dev/null +++ b/target/linux/generic/backport-5.15/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch @@ -0,0 +1,47 @@ +From 69b4339c0b9f3edc6a8f681f05efaaf4add1bb0e Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 19 Feb 2021 17:04:40 +0800 +Subject: [PATCH] r8152: enable U1/U2 for USB_SPEED_SUPER + +commit 7a0ae61acde2cebd69665837170405eced86a6c7 upstream. + +U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't +support it. + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -3336,7 +3336,7 @@ static void rtl8153b_runtime_enable(stru + r8153b_ups_en(tp, false); + r8153_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); +- if (tp->udev->speed != USB_SPEED_HIGH) ++ if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); + } + } +@@ -5029,7 +5029,7 @@ static void rtl8153b_up(struct r8152 *tp + + r8153_aldps_en(tp, true); + +- if (tp->udev->speed != USB_SPEED_HIGH) ++ if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); + } + +@@ -5571,8 +5571,9 @@ static void r8153b_init(struct r8152 *tp + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); + +- if (tp->udev->speed != USB_SPEED_HIGH) ++ if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); ++ + usb_enable_lpm(tp->udev); + + /* MAC clock speed down */ diff --git a/target/linux/generic/backport-5.15/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch b/target/linux/generic/backport-5.15/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch new file mode 100644 index 0000000000..5bc4e2b0a1 --- /dev/null +++ b/target/linux/generic/backport-5.15/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch @@ -0,0 +1,51 @@ +From e78b75f5be204a0a235da995d01c778dc282bb42 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 19 Feb 2021 17:04:41 +0800 +Subject: [PATCH] r8152: check if the pointer of the function exists + +commit c79515e47935c747282c6ed2ee5b2ef039756eeb upstream. + +Return error code if autosuspend_en, eee_get, or eee_set don't exist. + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -5758,6 +5758,9 @@ static int rtl8152_runtime_suspend(struc + struct net_device *netdev = tp->netdev; + int ret = 0; + ++ if (!tp->rtl_ops.autosuspend_en) ++ return -EBUSY; ++ + set_bit(SELECTIVE_SUSPEND, &tp->flags); + smp_mb__after_atomic(); + +@@ -6157,6 +6160,11 @@ rtl_ethtool_get_eee(struct net_device *n + struct r8152 *tp = netdev_priv(net); + int ret; + ++ if (!tp->rtl_ops.eee_get) { ++ ret = -EOPNOTSUPP; ++ goto out; ++ } ++ + ret = usb_autopm_get_interface(tp->intf); + if (ret < 0) + goto out; +@@ -6179,6 +6187,11 @@ rtl_ethtool_set_eee(struct net_device *n + struct r8152 *tp = netdev_priv(net); + int ret; + ++ if (!tp->rtl_ops.eee_set) { ++ ret = -EOPNOTSUPP; ++ goto out; ++ } ++ + ret = usb_autopm_get_interface(tp->intf); + if (ret < 0) + goto out; diff --git a/target/linux/generic/backport-5.15/788-v5.12-r8152-replace-netif_err-with-dev_err.patch b/target/linux/generic/backport-5.15/788-v5.12-r8152-replace-netif_err-with-dev_err.patch new file mode 100644 index 0000000000..967b4ccc16 --- /dev/null +++ b/target/linux/generic/backport-5.15/788-v5.12-r8152-replace-netif_err-with-dev_err.patch @@ -0,0 +1,36 @@ +From 38e44c7926512cff0b2809dc329de2a8e769e523 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 19 Feb 2021 17:04:42 +0800 +Subject: [PATCH] r8152: replace netif_err with dev_err + +commit 156c3207611262266f0eea589ac3f00c5657320e upstream. + +Some messages are before calling register_netdev(), so replace +netif_err() with dev_err(). + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -6594,7 +6594,7 @@ static int rtl_ops_init(struct r8152 *tp + + default: + ret = -ENODEV; +- netif_err(tp, probe, tp->netdev, "Unknown Device\n"); ++ dev_err(&tp->intf->dev, "Unknown Device\n"); + break; + } + +@@ -6851,7 +6851,7 @@ static int rtl8152_probe(struct usb_inte + + ret = register_netdev(netdev); + if (ret != 0) { +- netif_err(tp, probe, netdev, "couldn't register the device\n"); ++ dev_err(&intf->dev, "couldn't register the device\n"); + goto out1; + } + diff --git a/target/linux/generic/backport-5.15/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch b/target/linux/generic/backport-5.15/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch new file mode 100644 index 0000000000..c49a4ce5b6 --- /dev/null +++ b/target/linux/generic/backport-5.15/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch @@ -0,0 +1,89 @@ +From 260814de2d6cb958767785ffcb2e76915d1be32b Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 19 Feb 2021 17:04:43 +0800 +Subject: [PATCH] r8152: spilt rtl_set_eee_plus and r8153b_green_en + +commit 40fa7568ac230446d888b7ad402cff9e20fe3ad5 upstream. + +Add rtl_eee_plus_en() and rtl_green_en(). + +Signed-off-by: Hayes Wang +Signed-off-by: Jakub Kicinski +--- + drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++--------------- + 1 file changed, 27 insertions(+), 16 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -2633,21 +2633,24 @@ static inline u8 rtl8152_get_speed(struc + return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); + } + +-static void rtl_set_eee_plus(struct r8152 *tp) ++static void rtl_eee_plus_en(struct r8152 *tp, bool enable) + { + u32 ocp_data; +- u8 speed; + +- speed = rtl8152_get_speed(tp); +- if (speed & _10bps) { +- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); ++ if (enable) + ocp_data |= EEEP_CR_EEEP_TX; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); +- } else { +- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); ++ else + ocp_data &= ~EEEP_CR_EEEP_TX; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); +- } ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); ++} ++ ++static void rtl_set_eee_plus(struct r8152 *tp) ++{ ++ if (rtl8152_get_speed(tp) & _10bps) ++ rtl_eee_plus_en(tp, true); ++ else ++ rtl_eee_plus_en(tp, false); + } + + static void rxdy_gated_en(struct r8152 *tp, bool enable) +@@ -3128,10 +3131,22 @@ static void r8153b_ups_flags(struct r815 + ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); + } + +-static void r8153b_green_en(struct r8152 *tp, bool enable) ++static void rtl_green_en(struct r8152 *tp, bool enable) + { + u16 data; + ++ data = sram_read(tp, SRAM_GREEN_CFG); ++ if (enable) ++ data |= GREEN_ETH_EN; ++ else ++ data &= ~GREEN_ETH_EN; ++ sram_write(tp, SRAM_GREEN_CFG, data); ++ ++ tp->ups_info.green = enable; ++} ++ ++static void r8153b_green_en(struct r8152 *tp, bool enable) ++{ + if (enable) { + sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */ + sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */ +@@ -3142,11 +3157,7 @@ static void r8153b_green_en(struct r8152 + sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */ + } + +- data = sram_read(tp, SRAM_GREEN_CFG); +- data |= GREEN_ETH_EN; +- sram_write(tp, SRAM_GREEN_CFG, data); +- +- tp->ups_info.green = enable; ++ rtl_green_en(tp, true); + } + + static u16 r8153_phy_status(struct r8152 *tp, u16 desired) diff --git a/target/linux/generic/backport-5.15/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch b/target/linux/generic/backport-5.15/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch new file mode 100644 index 0000000000..f2593e8f00 --- /dev/null +++ b/target/linux/generic/backport-5.15/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch @@ -0,0 +1,75 @@ +From f1bbbb260a8016373adf239c716d2da90e6ced0b Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:32 +0800 +Subject: [PATCH] r8152: set inter fram gap time depending on speed + +commit 5133bcc7481528e36fff0a3b056601efb704fb32 upstream. + +Set the maximum inter frame gap time (144ns) for speed 10M/half and +100M/half. It improves the performance for those speeds. And, there +is no effect for the other speeds. + +For 10M/half and 100M/half, the fast inter frame gap time let the +device couldn't use the feature of the aggregation effectively, +because the transfer would be completed fastly. Therefore, use the +maximum value to improve the effect of the aggregation. However, you +may not feel the improvement for fast CPUs, because they compensate +for the effect of the aggregation. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -250,6 +250,9 @@ + + /* PLA_TCR1 */ + #define VERSION_MASK 0x7cf0 ++#define IFG_MASK (BIT(3) | BIT(9) | BIT(8)) ++#define IFG_144NS BIT(9) ++#define IFG_96NS (BIT(9) | BIT(8)) + + /* PLA_MTPS */ + #define MTPS_JUMBO (12 * 1024 / 64) +@@ -2748,6 +2751,29 @@ static int rtl_stop_rx(struct r8152 *tp) + return 0; + } + ++static void rtl_set_ifg(struct r8152 *tp, u16 speed) ++{ ++ u32 ocp_data; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); ++ ocp_data &= ~IFG_MASK; ++ if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) { ++ ocp_data |= IFG_144NS; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ ocp_data &= ~TX10MIDLE_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ } else { ++ ocp_data |= IFG_96NS; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ ocp_data |= TX10MIDLE_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ } ++} ++ + static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp) + { + ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN, +@@ -2851,6 +2877,8 @@ static int rtl8153_enable(struct r8152 * + r8153_set_rx_early_timeout(tp); + r8153_set_rx_early_size(tp); + ++ rtl_set_ifg(tp, rtl8152_get_speed(tp)); ++ + if (tp->version == RTL_VER_09) { + u32 ocp_data; + diff --git a/target/linux/generic/backport-5.15/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch b/target/linux/generic/backport-5.15/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch new file mode 100644 index 0000000000..cddd39ea94 --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch @@ -0,0 +1,152 @@ +From f10c9edf47d3fa240d965e151a48c670f5035b73 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:33 +0800 +Subject: [PATCH] r8152: adjust rtl8152_check_firmware function + +commit a8a7be178e81a3d4b6972cbeb0ccd091ca2f9f89 upstream. + +Use bits operations to record and check the firmware. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 51 +++++++++++++++++++++++------------------ + 1 file changed, 29 insertions(+), 22 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -875,6 +875,14 @@ struct fw_header { + struct fw_block blocks[]; + } __packed; + ++enum rtl8152_fw_flags { ++ FW_FLAGS_USB = 0, ++ FW_FLAGS_PLA, ++ FW_FLAGS_START, ++ FW_FLAGS_STOP, ++ FW_FLAGS_NC, ++}; ++ + /** + * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. + * The layout of the firmware block is: +@@ -3801,10 +3809,7 @@ static long rtl8152_check_firmware(struc + { + const struct firmware *fw = rtl_fw->fw; + struct fw_header *fw_hdr = (struct fw_header *)fw->data; +- struct fw_mac *pla = NULL, *usb = NULL; +- struct fw_phy_patch_key *start = NULL; +- struct fw_phy_nc *phy_nc = NULL; +- struct fw_block *stop = NULL; ++ unsigned long fw_flags = 0; + long ret = -EFAULT; + int i; + +@@ -3833,50 +3838,52 @@ static long rtl8152_check_firmware(struc + goto fail; + goto fw_end; + case RTL_FW_PLA: +- if (pla) { ++ if (test_bit(FW_FLAGS_PLA, &fw_flags)) { + dev_err(&tp->intf->dev, + "multiple PLA firmware encountered"); + goto fail; + } + +- pla = (struct fw_mac *)block; +- if (!rtl8152_is_fw_mac_ok(tp, pla)) { ++ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) { + dev_err(&tp->intf->dev, + "check PLA firmware failed\n"); + goto fail; + } ++ __set_bit(FW_FLAGS_PLA, &fw_flags); + break; + case RTL_FW_USB: +- if (usb) { ++ if (test_bit(FW_FLAGS_USB, &fw_flags)) { + dev_err(&tp->intf->dev, + "multiple USB firmware encountered"); + goto fail; + } + +- usb = (struct fw_mac *)block; +- if (!rtl8152_is_fw_mac_ok(tp, usb)) { ++ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) { + dev_err(&tp->intf->dev, + "check USB firmware failed\n"); + goto fail; + } ++ __set_bit(FW_FLAGS_USB, &fw_flags); + break; + case RTL_FW_PHY_START: +- if (start || phy_nc || stop) { ++ if (test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_NC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { + dev_err(&tp->intf->dev, + "check PHY_START fail\n"); + goto fail; + } + +- if (__le32_to_cpu(block->length) != sizeof(*start)) { ++ if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) { + dev_err(&tp->intf->dev, + "Invalid length for PHY_START\n"); + goto fail; + } +- +- start = (struct fw_phy_patch_key *)block; ++ __set_bit(FW_FLAGS_START, &fw_flags); + break; + case RTL_FW_PHY_STOP: +- if (stop || !start) { ++ if (test_bit(FW_FLAGS_STOP, &fw_flags) || ++ !test_bit(FW_FLAGS_START, &fw_flags)) { + dev_err(&tp->intf->dev, + "Check PHY_STOP fail\n"); + goto fail; +@@ -3887,28 +3894,28 @@ static long rtl8152_check_firmware(struc + "Invalid length for PHY_STOP\n"); + goto fail; + } +- +- stop = block; ++ __set_bit(FW_FLAGS_STOP, &fw_flags); + break; + case RTL_FW_PHY_NC: +- if (!start || stop) { ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { + dev_err(&tp->intf->dev, + "check PHY_NC fail\n"); + goto fail; + } + +- if (phy_nc) { ++ if (test_bit(FW_FLAGS_NC, &fw_flags)) { + dev_err(&tp->intf->dev, + "multiple PHY NC encountered\n"); + goto fail; + } + +- phy_nc = (struct fw_phy_nc *)block; +- if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) { ++ if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) { + dev_err(&tp->intf->dev, + "check PHY NC firmware failed\n"); + goto fail; + } ++ __set_bit(FW_FLAGS_NC, &fw_flags); + + break; + default: +@@ -3922,7 +3929,7 @@ static long rtl8152_check_firmware(struc + } + + fw_end: +- if ((phy_nc || start) && !stop) { ++ if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) { + dev_err(&tp->intf->dev, "without PHY_STOP\n"); + goto fail; + } diff --git a/target/linux/generic/backport-5.15/792-v5.13-r8152-add-help-function-to-change-mtu.patch b/target/linux/generic/backport-5.15/792-v5.13-r8152-add-help-function-to-change-mtu.patch new file mode 100644 index 0000000000..3559e3b95a --- /dev/null +++ b/target/linux/generic/backport-5.15/792-v5.13-r8152-add-help-function-to-change-mtu.patch @@ -0,0 +1,157 @@ +From f010a7d51cbb42bdb956f0a28b8868b15d7a3816 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:34 +0800 +Subject: [PATCH] r8152: add help function to change mtu + +commit 67ce1a806f164e59a074fea8809725d3411eaa20 upstream. + +The different chips may have different requests when changing mtu. +Therefore, add a new help function of rtl_ops to change mtu. Besides, +reset the tx/rx after changing mtu. + +Additionally, add mtu_to_size() and size_to_mtu() macros to simplify +the code. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 53 ++++++++++++++++++++++++----------------- + 1 file changed, 31 insertions(+), 22 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -658,15 +658,13 @@ enum rtl_register_content { + + #define INTR_LINK 0x0004 + +-#define RTL8153_MAX_PACKET 9216 /* 9K */ +-#define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \ +- ETH_FCS_LEN) + #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) + #define RTL8153_RMS RTL8153_MAX_PACKET + #define RTL8152_TX_TIMEOUT (5 * HZ) + #define RTL8152_NAPI_WEIGHT 64 +-#define rx_reserved_size(x) ((x) + VLAN_ETH_HLEN + ETH_FCS_LEN + \ +- sizeof(struct rx_desc) + RX_ALIGN) ++#define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN) ++#define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN) ++#define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN) + + /* rtl8152 flags */ + enum rtl8152_flags { +@@ -796,6 +794,7 @@ struct r8152 { + bool (*in_nway)(struct r8152 *tp); + void (*hw_phy_cfg)(struct r8152 *tp); + void (*autosuspend_en)(struct r8152 *tp, bool enable); ++ void (*change_mtu)(struct r8152 *tp); + } rtl_ops; + + struct ups_info { +@@ -1022,8 +1021,7 @@ enum tx_csum_stat { + static const int multicast_filter_limit = 32; + static unsigned int agg_buf_sz = 16384; + +-#define RTL_LIMITED_TSO_SIZE (agg_buf_sz - sizeof(struct tx_desc) - \ +- VLAN_ETH_HLEN - ETH_FCS_LEN) ++#define RTL_LIMITED_TSO_SIZE (size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc)) + + static + int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) +@@ -2633,10 +2631,7 @@ static void rtl8152_nic_reset(struct r81 + + static void set_tx_qlen(struct r8152 *tp) + { +- struct net_device *netdev = tp->netdev; +- +- tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN + +- sizeof(struct tx_desc)); ++ tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc)); + } + + static inline u8 rtl8152_get_speed(struct r8152 *tp) +@@ -4725,6 +4720,12 @@ static void r8153b_hw_phy_cfg(struct r81 + set_bit(PHY_RESET, &tp->flags); + } + ++static void rtl8153_change_mtu(struct r8152 *tp) ++{ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); ++} ++ + static void r8153_first_init(struct r8152 *tp) + { + u32 ocp_data; +@@ -4757,9 +4758,7 @@ static void r8153_first_init(struct r815 + + rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); + +- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); +- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); ++ rtl8153_change_mtu(tp); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); + ocp_data |= TCR0_AUTO_FIFO; +@@ -4794,8 +4793,7 @@ static void r8153_enter_oob(struct r8152 + + wait_oob_link_list_ready(tp); + +- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); + + switch (tp->version) { + case RTL_VER_03: +@@ -6518,12 +6516,21 @@ static int rtl8152_change_mtu(struct net + dev->mtu = new_mtu; + + if (netif_running(dev)) { +- u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; +- +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms); ++ if (tp->rtl_ops.change_mtu) ++ tp->rtl_ops.change_mtu(tp); + +- if (netif_carrier_ok(dev)) +- r8153_set_rx_early_size(tp); ++ if (netif_carrier_ok(dev)) { ++ netif_stop_queue(dev); ++ napi_disable(&tp->napi); ++ tasklet_disable(&tp->tx_tl); ++ tp->rtl_ops.disable(tp); ++ tp->rtl_ops.enable(tp); ++ rtl_start_rx(tp); ++ tasklet_enable(&tp->tx_tl); ++ napi_enable(&tp->napi); ++ rtl8152_set_rx_mode(dev); ++ netif_wake_queue(dev); ++ } + } + + mutex_unlock(&tp->control); +@@ -6612,6 +6619,7 @@ static int rtl_ops_init(struct r8152 *tp + ops->in_nway = rtl8153_in_nway; + ops->hw_phy_cfg = r8153_hw_phy_cfg; + ops->autosuspend_en = rtl8153_runtime_enable; ++ ops->change_mtu = rtl8153_change_mtu; + if (tp->udev->speed < USB_SPEED_SUPER) + tp->rx_buf_sz = 16 * 1024; + else +@@ -6633,6 +6641,7 @@ static int rtl_ops_init(struct r8152 *tp + ops->in_nway = rtl8153_in_nway; + ops->hw_phy_cfg = r8153b_hw_phy_cfg; + ops->autosuspend_en = rtl8153b_runtime_enable; ++ ops->change_mtu = rtl8153_change_mtu; + tp->rx_buf_sz = 32 * 1024; + tp->eee_en = true; + tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; +@@ -6853,7 +6862,7 @@ static int rtl8152_probe(struct usb_inte + netdev->max_mtu = ETH_DATA_LEN; + break; + default: +- netdev->max_mtu = RTL8153_MAX_MTU; ++ netdev->max_mtu = size_to_mtu(9 * 1024); + break; + } + diff --git a/target/linux/generic/backport-5.15/793-v5.13-r8152-support-new-chips.patch b/target/linux/generic/backport-5.15/793-v5.13-r8152-support-new-chips.patch new file mode 100644 index 0000000000..06a141b451 --- /dev/null +++ b/target/linux/generic/backport-5.15/793-v5.13-r8152-support-new-chips.patch @@ -0,0 +1,2886 @@ +From e7439e7fd384f55f55837f7e4866e74d8dca3827 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:35 +0800 +Subject: [PATCH] r8152: support new chips + +commit 195aae321c829dd1945900d75561e6aa79cce208 upstream. + +Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A +and RTL8156B are the 2.5G ethernet. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 2634 +++++++++++++++++++++++++++++++++++---- + 1 file changed, 2359 insertions(+), 275 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -44,10 +44,14 @@ + + #define PLA_IDR 0xc000 + #define PLA_RCR 0xc010 ++#define PLA_RCR1 0xc012 + #define PLA_RMS 0xc016 + #define PLA_RXFIFO_CTRL0 0xc0a0 ++#define PLA_RXFIFO_FULL 0xc0a2 + #define PLA_RXFIFO_CTRL1 0xc0a4 ++#define PLA_RX_FIFO_FULL 0xc0a6 + #define PLA_RXFIFO_CTRL2 0xc0a8 ++#define PLA_RX_FIFO_EMPTY 0xc0aa + #define PLA_DMY_REG0 0xc0b0 + #define PLA_FMC 0xc0b4 + #define PLA_CFG_WOL 0xc0b6 +@@ -64,6 +68,8 @@ + #define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */ + #define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */ + #define PLA_EXTRA_STATUS 0xd398 ++#define PLA_GPHY_CTRL 0xd3ae ++#define PLA_POL_GPIO_CTRL 0xdc6a + #define PLA_EFUSE_DATA 0xdd00 + #define PLA_EFUSE_CMD 0xdd02 + #define PLA_LEDSEL 0xdd90 +@@ -73,6 +79,8 @@ + #define PLA_LWAKE_CTRL_REG 0xe007 + #define PLA_GPHY_INTR_IMR 0xe022 + #define PLA_EEE_CR 0xe040 ++#define PLA_EEE_TXTWSYS 0xe04c ++#define PLA_EEE_TXTWSYS_2P5G 0xe058 + #define PLA_EEEP_CR 0xe080 + #define PLA_MAC_PWR_CTRL 0xe0c0 + #define PLA_MAC_PWR_CTRL2 0xe0ca +@@ -83,6 +91,7 @@ + #define PLA_TCR1 0xe612 + #define PLA_MTPS 0xe615 + #define PLA_TXFIFO_CTRL 0xe618 ++#define PLA_TXFIFO_FULL 0xe61a + #define PLA_RSTTALLY 0xe800 + #define PLA_CR 0xe813 + #define PLA_CRWECR 0xe81c +@@ -99,6 +108,7 @@ + #define PLA_SFF_STS_7 0xe8de + #define PLA_PHYSTATUS 0xe908 + #define PLA_CONFIG6 0xe90a /* CONFIG6 */ ++#define PLA_USB_CFG 0xe952 + #define PLA_BP_BA 0xfc26 + #define PLA_BP_0 0xfc28 + #define PLA_BP_1 0xfc2a +@@ -113,6 +123,7 @@ + #define USB_USB2PHY 0xb41e + #define USB_SSPHYLINK1 0xb426 + #define USB_SSPHYLINK2 0xb428 ++#define USB_L1_CTRL 0xb45e + #define USB_U2P3_CTRL 0xb460 + #define USB_CSR_DUMMY1 0xb464 + #define USB_CSR_DUMMY2 0xb466 +@@ -123,7 +134,12 @@ + #define USB_FW_FIX_EN0 0xcfca + #define USB_FW_FIX_EN1 0xcfcc + #define USB_LPM_CONFIG 0xcfd8 ++#define USB_ECM_OPTION 0xcfee + #define USB_CSTMR 0xcfef /* RTL8153A */ ++#define USB_MISC_2 0xcfff ++#define USB_ECM_OP 0xd26b ++#define USB_GPHY_CTRL 0xd284 ++#define USB_SPEED_OPTION 0xd32a + #define USB_FW_CTRL 0xd334 /* RTL8153B */ + #define USB_FC_TIMER 0xd340 + #define USB_USB_CTRL 0xd406 +@@ -137,16 +153,20 @@ + #define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */ + #define USB_TX_DMA 0xd434 + #define USB_UPT_RXDMA_OWN 0xd437 ++#define USB_UPHY3_MDCMDIO 0xd480 + #define USB_TOLERANCE 0xd490 + #define USB_LPM_CTRL 0xd41a + #define USB_BMU_RESET 0xd4b0 ++#define USB_BMU_CONFIG 0xd4b4 + #define USB_U1U2_TIMER 0xd4da + #define USB_FW_TASK 0xd4e8 /* RTL8153B */ ++#define USB_RX_AGGR_NUM 0xd4ee + #define USB_UPS_CTRL 0xd800 + #define USB_POWER_CUT 0xd80a + #define USB_MISC_0 0xd81a + #define USB_MISC_1 0xd81f + #define USB_AFE_CTRL2 0xd824 ++#define USB_UPHY_XTAL 0xd826 + #define USB_UPS_CFG 0xd842 + #define USB_UPS_FLAGS 0xd848 + #define USB_WDT1_CTRL 0xe404 +@@ -189,6 +209,9 @@ + #define OCP_EEE_ABLE 0xa5c4 + #define OCP_EEE_ADV 0xa5d0 + #define OCP_EEE_LPABLE 0xa5d2 ++#define OCP_10GBT_CTRL 0xa5d4 ++#define OCP_10GBT_STAT 0xa5d6 ++#define OCP_EEE_ADV2 0xa6d4 + #define OCP_PHY_STATE 0xa708 /* nway state for 8153 */ + #define OCP_PHY_PATCH_STAT 0xb800 + #define OCP_PHY_PATCH_CMD 0xb820 +@@ -200,6 +223,7 @@ + /* SRAM Register */ + #define SRAM_GREEN_CFG 0x8011 + #define SRAM_LPF_CFG 0x8012 ++#define SRAM_GPHY_FW_VER 0x801e + #define SRAM_10M_AMP1 0x8080 + #define SRAM_10M_AMP2 0x8082 + #define SRAM_IMPEDANCE 0x8084 +@@ -211,11 +235,19 @@ + #define RCR_AM 0x00000004 + #define RCR_AB 0x00000008 + #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB) ++#define SLOT_EN BIT(11) ++ ++/* PLA_RCR1 */ ++#define OUTER_VLAN BIT(7) ++#define INNER_VLAN BIT(6) + + /* PLA_RXFIFO_CTRL0 */ + #define RXFIFO_THR1_NORMAL 0x00080002 + #define RXFIFO_THR1_OOB 0x01800003 + ++/* PLA_RXFIFO_FULL */ ++#define RXFIFO_FULL_MASK 0xfff ++ + /* PLA_RXFIFO_CTRL1 */ + #define RXFIFO_THR2_FULL 0x00000060 + #define RXFIFO_THR2_HIGH 0x00000038 +@@ -286,6 +318,7 @@ + #define MCU_BORW_EN 0x4000 + + /* PLA_CPCR */ ++#define FLOW_CTRL_EN BIT(0) + #define CPCR_RX_VLAN 0x0040 + + /* PLA_CFG_WOL */ +@@ -311,6 +344,10 @@ + /* PLA_CONFIG6 */ + #define LANWAKE_CLR_EN BIT(0) + ++/* PLA_USB_CFG */ ++#define EN_XG_LIP BIT(1) ++#define EN_G_LIP BIT(2) ++ + /* PLA_CONFIG5 */ + #define BWF_EN 0x0040 + #define MWF_EN 0x0020 +@@ -334,6 +371,7 @@ + /* PLA_MAC_PWR_CTRL2 */ + #define EEE_SPDWN_RATIO 0x8007 + #define MAC_CLK_SPDWN_EN BIT(15) ++#define EEE_SPDWN_RATIO_MASK 0xff + + /* PLA_MAC_PWR_CTRL3 */ + #define PLA_MCU_SPDWN_EN BIT(14) +@@ -346,6 +384,7 @@ + #define PWRSAVE_SPDWN_EN 0x1000 + #define RXDV_SPDWN_EN 0x0800 + #define TX10MIDLE_EN 0x0100 ++#define IDLE_SPDWN_EN BIT(6) + #define TP100_SPDWN_EN 0x0020 + #define TP500_SPDWN_EN 0x0010 + #define TP1000_SPDWN_EN 0x0008 +@@ -386,6 +425,13 @@ + #define LINK_CHANGE_FLAG BIT(8) + #define POLL_LINK_CHG BIT(0) + ++/* PLA_GPHY_CTRL */ ++#define GPHY_FLASH BIT(1) ++ ++/* PLA_POL_GPIO_CTRL */ ++#define DACK_DET_EN BIT(15) ++#define POL_GPHY_PATCH BIT(4) ++ + /* USB_USB2PHY */ + #define USB2PHY_SUSPEND 0x0001 + #define USB2PHY_L1 0x0002 +@@ -434,6 +480,9 @@ + #define BMU_RESET_EP_IN 0x01 + #define BMU_RESET_EP_OUT 0x02 + ++/* USB_BMU_CONFIG */ ++#define ACT_ODMA BIT(1) ++ + /* USB_UPT_RXDMA_OWN */ + #define OWN_UPDATE BIT(0) + #define OWN_CLEAR BIT(1) +@@ -441,27 +490,52 @@ + /* USB_FW_TASK */ + #define FC_PATCH_TASK BIT(1) + ++/* USB_RX_AGGR_NUM */ ++#define RX_AGGR_NUM_MASK 0x1ff ++ + /* USB_UPS_CTRL */ + #define POWER_CUT 0x0100 + + /* USB_PM_CTRL_STATUS */ + #define RESUME_INDICATE 0x0001 + ++/* USB_ECM_OPTION */ ++#define BYPASS_MAC_RESET BIT(5) ++ + /* USB_CSTMR */ + #define FORCE_SUPER BIT(0) + ++/* USB_MISC_2 */ ++#define UPS_FORCE_PWR_DOWN BIT(0) ++ ++/* USB_ECM_OP */ ++#define EN_ALL_SPEED BIT(0) ++ ++/* USB_GPHY_CTRL */ ++#define GPHY_PATCH_DONE BIT(2) ++#define BYPASS_FLASH BIT(5) ++#define BACKUP_RESTRORE BIT(6) ++ ++/* USB_SPEED_OPTION */ ++#define RG_PWRDN_EN BIT(8) ++#define ALL_SPEED_OFF BIT(9) ++ + /* USB_FW_CTRL */ + #define FLOW_CTRL_PATCH_OPT BIT(1) ++#define AUTO_SPEEDUP BIT(3) ++#define FLOW_CTRL_PATCH_2 BIT(8) + + /* USB_FC_TIMER */ + #define CTRL_TIMER_EN BIT(15) + + /* USB_USB_CTRL */ ++#define CDC_ECM_EN BIT(3) + #define RX_AGG_DISABLE 0x0010 + #define RX_ZERO_EN 0x0080 + + /* USB_U2P3_CTRL */ + #define U2P3_ENABLE 0x0001 ++#define RX_DETECT8 BIT(3) + + /* USB_POWER_CUT */ + #define PWR_EN 0x0001 +@@ -497,8 +571,12 @@ + #define SEN_VAL_NORMAL 0xa000 + #define SEL_RXIDLE 0x0100 + ++/* USB_UPHY_XTAL */ ++#define OOBS_POLLING BIT(8) ++ + /* USB_UPS_CFG */ + #define SAW_CNT_1MS_MASK 0x0fff ++#define MID_REVERSE BIT(5) /* RTL8156A */ + + /* USB_UPS_FLAGS */ + #define UPS_FLAGS_R_TUNE BIT(0) +@@ -506,6 +584,7 @@ + #define UPS_FLAGS_250M_CKDIV BIT(2) + #define UPS_FLAGS_EN_ALDPS BIT(3) + #define UPS_FLAGS_CTAP_SHORT_DIS BIT(4) ++#define UPS_FLAGS_SPEED_MASK (0xf << 16) + #define ups_flags_speed(x) ((x) << 16) + #define UPS_FLAGS_EN_EEE BIT(20) + #define UPS_FLAGS_EN_500M_EEE BIT(21) +@@ -526,6 +605,8 @@ enum spd_duplex { + FORCE_10M_FULL, + FORCE_100M_HALF, + FORCE_100M_FULL, ++ FORCE_1000M_FULL, ++ NWAY_2500M_FULL, + }; + + /* OCP_ALDPS_CONFIG */ +@@ -590,6 +671,9 @@ enum spd_duplex { + #define EN_10M_CLKDIV BIT(11) + #define EN_10M_BGOFF 0x0080 + ++/* OCP_10GBT_CTRL */ ++#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */ ++ + /* OCP_PHY_STATE */ + #define TXDIS_STATE 0x01 + #define ABD_STATE 0x02 +@@ -609,7 +693,8 @@ enum spd_duplex { + #define EN_EMI_L 0x0040 + + /* OCP_SYSCLK_CFG */ +-#define clk_div_expo(x) (min(x, 5) << 8) ++#define sysclk_div_expo(x) (min(x, 5) << 8) ++#define clk_div_expo(x) (min(x, 5) << 4) + + /* SRAM_GREEN_CFG */ + #define GREEN_ETH_EN BIT(15) +@@ -640,6 +725,11 @@ enum spd_duplex { + #define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */ + + enum rtl_register_content { ++ _2500bps = BIT(10), ++ _1250bps = BIT(9), ++ _500bps = BIT(8), ++ _tx_flow = BIT(6), ++ _rx_flow = BIT(5), + _1000bps = 0x10, + _100bps = 0x08, + _10bps = 0x04, +@@ -647,6 +737,9 @@ enum rtl_register_content { + FULL_DUP = 0x01, + }; + ++#define is_speed_2500(_speed) (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS)) ++#define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow)) ++ + #define RTL8152_MAX_TX 4 + #define RTL8152_MAX_RX 10 + #define INTBUFSIZE 2 +@@ -661,7 +754,6 @@ enum rtl_register_content { + #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) + #define RTL8153_RMS RTL8153_MAX_PACKET + #define RTL8152_TX_TIMEOUT (5 * HZ) +-#define RTL8152_NAPI_WEIGHT 64 + #define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN) + #define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN) + #define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN) +@@ -798,6 +890,7 @@ struct r8152 { + } rtl_ops; + + struct ups_info { ++ u32 r_tune:1; + u32 _10m_ckdiv:1; + u32 _250m_ckdiv:1; + u32 aldps:1; +@@ -839,7 +932,9 @@ struct r8152 { + u32 rx_buf_sz; + u32 rx_copybreak; + u32 rx_pending; ++ u32 fc_pause_on, fc_pause_off; + ++ u32 support_2500full:1; + u16 ocp_base; + u16 speed; + u16 eee_adv; +@@ -999,6 +1094,15 @@ enum rtl_version { + RTL_VER_07, + RTL_VER_08, + RTL_VER_09, ++ ++ RTL_TEST_01, ++ RTL_VER_10, ++ RTL_VER_11, ++ RTL_VER_12, ++ RTL_VER_13, ++ RTL_VER_14, ++ RTL_VER_15, ++ + RTL_VER_MAX + }; + +@@ -1014,6 +1118,7 @@ enum tx_csum_stat { + #define RTL_ADVERTISED_100_FULL BIT(3) + #define RTL_ADVERTISED_1000_HALF BIT(4) + #define RTL_ADVERTISED_1000_FULL BIT(5) ++#define RTL_ADVERTISED_2500_FULL BIT(6) + + /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The RTL chips use a 64 element hash table based on the Ethernet CRC. +@@ -2607,7 +2712,7 @@ static netdev_tx_t rtl8152_start_xmit(st + + static void r8152b_reset_packet_filter(struct r8152 *tp) + { +- u32 ocp_data; ++ u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); + ocp_data &= ~FMC_FCR_MCU_EN; +@@ -2618,14 +2723,47 @@ static void r8152b_reset_packet_filter(s + + static void rtl8152_nic_reset(struct r8152 *tp) + { +- int i; ++ u32 ocp_data; ++ int i; + +- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); ++ switch (tp->version) { ++ case RTL_TEST_01: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); ++ ocp_data &= ~CR_TE; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET); ++ ocp_data &= ~BMU_RESET_EP_IN; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ++ ocp_data |= CDC_ECM_EN; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); ++ ocp_data &= ~CR_RE; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET); ++ ocp_data |= BMU_RESET_EP_IN; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ++ ocp_data &= ~CDC_ECM_EN; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ break; + +- for (i = 0; i < 1000; i++) { +- if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) +- break; +- usleep_range(100, 400); ++ default: ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); ++ ++ for (i = 0; i < 1000; i++) { ++ if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) ++ break; ++ usleep_range(100, 400); ++ } ++ break; + } + } + +@@ -2634,9 +2772,9 @@ static void set_tx_qlen(struct r8152 *tp + tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc)); + } + +-static inline u8 rtl8152_get_speed(struct r8152 *tp) ++static inline u16 rtl8152_get_speed(struct r8152 *tp) + { +- return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); ++ return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); + } + + static void rtl_eee_plus_en(struct r8152 *tp, bool enable) +@@ -2796,6 +2934,7 @@ static int rtl_enable(struct r8152 *tp) + switch (tp->version) { + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_14: + r8153b_rx_agg_chg_indicate(tp); + break; + default: +@@ -2833,6 +2972,7 @@ static void r8153_set_rx_early_timeout(s + + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_14: + /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout + * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns. + */ +@@ -2842,6 +2982,18 @@ static void r8153_set_rx_early_timeout(s + ocp_data); + break; + ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ++ 640 / 8); ++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR, ++ ocp_data); ++ r8153b_rx_agg_chg_indicate(tp); ++ break; ++ + default: + break; + } +@@ -2861,8 +3013,19 @@ static void r8153_set_rx_early_size(stru + break; + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_14: ++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ++ ocp_data / 8); ++ break; ++ case RTL_TEST_01: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, + ocp_data / 8); ++ r8153b_rx_agg_chg_indicate(tp); + break; + default: + WARN_ON_ONCE(1); +@@ -2872,6 +3035,8 @@ static void r8153_set_rx_early_size(stru + + static int rtl8153_enable(struct r8152 *tp) + { ++ u32 ocp_data; ++ + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return -ENODEV; + +@@ -2882,15 +3047,18 @@ static int rtl8153_enable(struct r8152 * + + rtl_set_ifg(tp, rtl8152_get_speed(tp)); + +- if (tp->version == RTL_VER_09) { +- u32 ocp_data; +- ++ switch (tp->version) { ++ case RTL_VER_09: ++ case RTL_VER_14: + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); + ocp_data &= ~FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + usleep_range(1000, 2000); + ocp_data |= FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); ++ break; ++ default: ++ break; + } + + return rtl_enable(tp); +@@ -2955,12 +3123,40 @@ static void rtl_rx_vlan_en(struct r8152 + { + u32 ocp_data; + +- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); +- if (enable) +- ocp_data |= CPCR_RX_VLAN; +- else +- ocp_data &= ~CPCR_RX_VLAN; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); ++ switch (tp->version) { ++ case RTL_VER_01: ++ case RTL_VER_02: ++ case RTL_VER_03: ++ case RTL_VER_04: ++ case RTL_VER_05: ++ case RTL_VER_06: ++ case RTL_VER_07: ++ case RTL_VER_08: ++ case RTL_VER_09: ++ case RTL_VER_14: ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); ++ if (enable) ++ ocp_data |= CPCR_RX_VLAN; ++ else ++ ocp_data &= ~CPCR_RX_VLAN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); ++ break; ++ ++ case RTL_TEST_01: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ default: ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1); ++ if (enable) ++ ocp_data |= OUTER_VLAN | INNER_VLAN; ++ else ++ ocp_data &= ~(OUTER_VLAN | INNER_VLAN); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data); ++ break; ++ } + } + + static int rtl8152_set_features(struct net_device *dev, +@@ -3053,6 +3249,40 @@ static void __rtl_set_wol(struct r8152 * + device_set_wakeup_enable(&tp->udev->dev, false); + } + ++static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable) ++{ ++ u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); ++ ++ /* MAC clock speed down */ ++ if (enable) ++ ocp_data |= MAC_CLK_SPDWN_EN; ++ else ++ ocp_data &= ~MAC_CLK_SPDWN_EN; ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); ++} ++ ++static void r8156_mac_clk_spd(struct r8152 *tp, bool enable) ++{ ++ u32 ocp_data; ++ ++ /* MAC clock speed down */ ++ if (enable) { ++ /* aldps_spdwn_ratio, tp10_spdwn_ratio */ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ++ 0x0403); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); ++ ocp_data &= ~EEE_SPDWN_RATIO_MASK; ++ ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); ++ } else { ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); ++ ocp_data &= ~MAC_CLK_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); ++ } ++} ++ + static void r8153_u1u2en(struct r8152 *tp, bool enable) + { + u8 u1u2[8]; +@@ -3112,6 +3342,9 @@ static void r8153b_ups_flags(struct r815 + if (tp->ups_info.eee_cmod_lv) + ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN; + ++ if (tp->ups_info.r_tune) ++ ups_flags |= UPS_FLAGS_R_TUNE; ++ + if (tp->ups_info._10m_ckdiv) + ups_flags |= UPS_FLAGS_EN_10M_CKDIV; + +@@ -3162,6 +3395,88 @@ static void r8153b_ups_flags(struct r815 + ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); + } + ++static void r8156_ups_flags(struct r8152 *tp) ++{ ++ u32 ups_flags = 0; ++ ++ if (tp->ups_info.green) ++ ups_flags |= UPS_FLAGS_EN_GREEN; ++ ++ if (tp->ups_info.aldps) ++ ups_flags |= UPS_FLAGS_EN_ALDPS; ++ ++ if (tp->ups_info.eee) ++ ups_flags |= UPS_FLAGS_EN_EEE; ++ ++ if (tp->ups_info.flow_control) ++ ups_flags |= UPS_FLAGS_EN_FLOW_CTR; ++ ++ if (tp->ups_info.eee_ckdiv) ++ ups_flags |= UPS_FLAGS_EN_EEE_CKDIV; ++ ++ if (tp->ups_info._10m_ckdiv) ++ ups_flags |= UPS_FLAGS_EN_10M_CKDIV; ++ ++ if (tp->ups_info.eee_plloff_100) ++ ups_flags |= UPS_FLAGS_EEE_PLLOFF_100; ++ ++ if (tp->ups_info.eee_plloff_giga) ++ ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA; ++ ++ if (tp->ups_info._250m_ckdiv) ++ ups_flags |= UPS_FLAGS_250M_CKDIV; ++ ++ switch (tp->ups_info.speed_duplex) { ++ case FORCE_10M_HALF: ++ ups_flags |= ups_flags_speed(0); ++ break; ++ case FORCE_10M_FULL: ++ ups_flags |= ups_flags_speed(1); ++ break; ++ case FORCE_100M_HALF: ++ ups_flags |= ups_flags_speed(2); ++ break; ++ case FORCE_100M_FULL: ++ ups_flags |= ups_flags_speed(3); ++ break; ++ case NWAY_10M_HALF: ++ ups_flags |= ups_flags_speed(4); ++ break; ++ case NWAY_10M_FULL: ++ ups_flags |= ups_flags_speed(5); ++ break; ++ case NWAY_100M_HALF: ++ ups_flags |= ups_flags_speed(6); ++ break; ++ case NWAY_100M_FULL: ++ ups_flags |= ups_flags_speed(7); ++ break; ++ case NWAY_1000M_FULL: ++ ups_flags |= ups_flags_speed(8); ++ break; ++ case NWAY_2500M_FULL: ++ ups_flags |= ups_flags_speed(9); ++ break; ++ default: ++ break; ++ } ++ ++ switch (tp->ups_info.lite_mode) { ++ case 1: ++ ups_flags |= 0 << 5; ++ break; ++ case 2: ++ ups_flags |= 2 << 5; ++ break; ++ case 0: ++ default: ++ ups_flags |= 1 << 5; ++ break; ++ } ++ ++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags); ++} ++ + static void rtl_green_en(struct r8152 *tp, bool enable) + { + u16 data; +@@ -3225,16 +3540,16 @@ static void r8153b_ups_en(struct r8152 * + ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; + ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + +- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); +- ocp_data |= BIT(0); +- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data |= UPS_FORCE_PWR_DOWN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); + } else { + ocp_data &= ~(UPS_EN | USP_PREWAKE); + ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + +- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); +- ocp_data &= ~BIT(0); +- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data &= ~UPS_FORCE_PWR_DOWN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); + + if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { + int i; +@@ -3254,6 +3569,95 @@ static void r8153b_ups_en(struct r8152 * + } + } + ++static void r8153c_ups_en(struct r8152 *tp, bool enable) ++{ ++ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT); ++ ++ if (enable) { ++ r8153b_ups_flags(tp); ++ ++ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data |= UPS_FORCE_PWR_DOWN; ++ ocp_data &= ~BIT(7); ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); ++ } else { ++ ocp_data &= ~(UPS_EN | USP_PREWAKE); ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data &= ~UPS_FORCE_PWR_DOWN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); ++ ++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { ++ int i; ++ ++ for (i = 0; i < 500; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & ++ AUTOLOAD_DONE) ++ break; ++ msleep(20); ++ } ++ ++ tp->rtl_ops.hw_phy_cfg(tp); ++ ++ rtl8152_set_speed(tp, tp->autoneg, tp->speed, ++ tp->duplex, tp->advertising); ++ } ++ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); ++ ocp_data |= BIT(8); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); ++ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); ++ } ++} ++ ++static void r8156_ups_en(struct r8152 *tp, bool enable) ++{ ++ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT); ++ ++ if (enable) { ++ r8156_ups_flags(tp); ++ ++ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data |= UPS_FORCE_PWR_DOWN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); ++ ++ switch (tp->version) { ++ case RTL_VER_13: ++ case RTL_VER_15: ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL); ++ ocp_data &= ~OOBS_POLLING; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data); ++ break; ++ default: ++ break; ++ } ++ } else { ++ ocp_data &= ~(UPS_EN | USP_PREWAKE); ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data &= ~UPS_FORCE_PWR_DOWN; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); ++ ++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) { ++ tp->rtl_ops.hw_phy_cfg(tp); ++ ++ rtl8152_set_speed(tp, tp->autoneg, tp->speed, ++ tp->duplex, tp->advertising); ++ } ++ } ++} ++ + static void r8153_power_cut_en(struct r8152 *tp, bool enable) + { + u32 ocp_data; +@@ -3383,6 +3787,38 @@ static void rtl8153b_runtime_enable(stru + } + } + ++static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable) ++{ ++ if (enable) { ++ r8153_queue_wake(tp, true); ++ r8153b_u1u2en(tp, false); ++ r8153_u2p3en(tp, false); ++ rtl_runtime_suspend_enable(tp, true); ++ r8153c_ups_en(tp, true); ++ } else { ++ r8153c_ups_en(tp, false); ++ r8153_queue_wake(tp, false); ++ rtl_runtime_suspend_enable(tp, false); ++ r8153b_u1u2en(tp, true); ++ } ++} ++ ++static void rtl8156_runtime_enable(struct r8152 *tp, bool enable) ++{ ++ if (enable) { ++ r8153_queue_wake(tp, true); ++ r8153b_u1u2en(tp, false); ++ r8153_u2p3en(tp, false); ++ rtl_runtime_suspend_enable(tp, true); ++ } else { ++ r8153_queue_wake(tp, false); ++ rtl_runtime_suspend_enable(tp, false); ++ r8153_u2p3en(tp, true); ++ if (tp->udev->speed >= USB_SPEED_SUPER) ++ r8153b_u1u2en(tp, true); ++ } ++} ++ + static void r8153_teredo_off(struct r8152 *tp) + { + u32 ocp_data; +@@ -3403,14 +3839,19 @@ static void r8153_teredo_off(struct r815 + + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_TEST_01: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_14: ++ case RTL_VER_15: ++ default: + /* The bit 0 ~ 7 are relative with teredo settings. They are + * W1C (write 1 to clear), so set all 1 to disable it. + */ + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff); + break; +- +- default: +- break; + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE); +@@ -3445,6 +3886,12 @@ static void rtl_clear_bp(struct r8152 *t + break; + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_14: ++ case RTL_VER_15: + default: + if (type == MCU_TYPE_USB) { + ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0); +@@ -3654,6 +4101,11 @@ static bool rtl8152_is_fw_mac_ok(struct + case RTL_VER_06: + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_14: ++ case RTL_VER_15: + fw_reg = 0xf800; + bp_ba_addr = PLA_BP_BA; + bp_en_addr = PLA_BP_EN; +@@ -3677,6 +4129,11 @@ static bool rtl8152_is_fw_mac_ok(struct + break; + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_14: ++ case RTL_VER_15: + fw_reg = 0xe600; + bp_ba_addr = USB_BP_BA; + bp_en_addr = USB_BP2_EN; +@@ -4216,6 +4673,22 @@ static void r8153_eee_en(struct r8152 *t + tp->ups_info.eee = enable; + } + ++static void r8156_eee_en(struct r8152 *tp, bool enable) ++{ ++ u16 config; ++ ++ r8153_eee_en(tp, enable); ++ ++ config = ocp_reg_read(tp, OCP_EEE_ADV2); ++ ++ if (enable) ++ config |= MDIO_EEE_2_5GT; ++ else ++ config &= ~MDIO_EEE_2_5GT; ++ ++ ocp_reg_write(tp, OCP_EEE_ADV2, config); ++} ++ + static void rtl_eee_enable(struct r8152 *tp, bool enable) + { + switch (tp->version) { +@@ -4237,6 +4710,7 @@ static void rtl_eee_enable(struct r8152 + case RTL_VER_06: + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_14: + if (enable) { + r8153_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv); +@@ -4245,6 +4719,19 @@ static void rtl_eee_enable(struct r8152 + ocp_reg_write(tp, OCP_EEE_ADV, 0); + } + break; ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ if (enable) { ++ r8156_eee_en(tp, true); ++ ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv); ++ } else { ++ r8156_eee_en(tp, false); ++ ocp_reg_write(tp, OCP_EEE_ADV, 0); ++ } ++ break; + default: + break; + } +@@ -4291,6 +4778,20 @@ static void wait_oob_link_list_ready(str + } + } + ++static void r8156b_wait_loading_flash(struct r8152 *tp) ++{ ++ if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) && ++ !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) { ++ int i; ++ ++ for (i = 0; i < 100; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE) ++ break; ++ usleep_range(1000, 2000); ++ } ++ } ++} ++ + static void r8152b_exit_oob(struct r8152 *tp) + { + u32 ocp_data; +@@ -4341,7 +4842,7 @@ static void r8152b_exit_oob(struct r8152 + } + + /* TX share fifo free credit full threshold */ +- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); ++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2); + + ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH); +@@ -4518,6 +5019,21 @@ static int r8153b_post_firmware_1(struct + return 0; + } + ++static int r8153c_post_firmware_1(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL); ++ ocp_data |= FLOW_CTRL_PATCH_2; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); ++ ocp_data |= FC_PATCH_TASK; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); ++ ++ return 0; ++} ++ + static void r8153_aldps_en(struct r8152 *tp, bool enable) + { + u16 data; +@@ -4720,6 +5236,13 @@ static void r8153b_hw_phy_cfg(struct r81 + set_bit(PHY_RESET, &tp->flags); + } + ++static void r8153c_hw_phy_cfg(struct r8152 *tp) ++{ ++ r8153b_hw_phy_cfg(tp); ++ ++ tp->ups_info.r_tune = true; ++} ++ + static void rtl8153_change_mtu(struct r8152 *tp) + { + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); +@@ -4807,6 +5330,7 @@ static void r8153_enter_oob(struct r8152 + + case RTL_VER_08: + case RTL_VER_09: ++ case RTL_VER_14: + /* Clear teredo wake event. bit[15:8] is the teredo wakeup + * type. Set it to zero. bits[7:0] are the W1C bits about + * the events. Set them to all 1 to clear them. +@@ -4843,6 +5367,96 @@ static void rtl8153_disable(struct r8152 + r8153_aldps_en(tp, true); + } + ++static int rtl8156_enable(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 speed; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return -ENODEV; ++ ++ set_tx_qlen(tp); ++ rtl_set_eee_plus(tp); ++ r8153_set_rx_early_timeout(tp); ++ r8153_set_rx_early_size(tp); ++ ++ speed = rtl8152_get_speed(tp); ++ rtl_set_ifg(tp, speed); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ if (speed & _2500bps) ++ ocp_data &= ~IDLE_SPDWN_EN; ++ else ++ ocp_data |= IDLE_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ ++ if (speed & _1000bps) ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11); ++ else if (speed & _500bps) ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d); ++ ++ if (tp->udev->speed == USB_SPEED_HIGH) { ++ /* USB 0xb45e[3:0] l1_nyet_hird */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL); ++ ocp_data &= ~0xf; ++ if (is_flow_control(speed)) ++ ocp_data |= 0xf; ++ else ++ ocp_data |= 0x1; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data); ++ } ++ ++ return rtl_enable(tp); ++} ++ ++static int rtl8156b_enable(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 speed; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return -ENODEV; ++ ++ set_tx_qlen(tp); ++ rtl_set_eee_plus(tp); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM); ++ ocp_data &= ~RX_AGGR_NUM_MASK; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data); ++ ++ r8153_set_rx_early_timeout(tp); ++ r8153_set_rx_early_size(tp); ++ ++ speed = rtl8152_get_speed(tp); ++ rtl_set_ifg(tp, speed); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ if (speed & _2500bps) ++ ocp_data &= ~IDLE_SPDWN_EN; ++ else ++ ocp_data |= IDLE_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ ++ if (tp->udev->speed == USB_SPEED_HIGH) { ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL); ++ ocp_data &= ~0xf; ++ if (is_flow_control(speed)) ++ ocp_data |= 0xf; ++ else ++ ocp_data |= 0x1; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data); ++ } ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); ++ ocp_data &= ~FC_PATCH_TASK; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); ++ usleep_range(1000, 2000); ++ ocp_data |= FC_PATCH_TASK; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); ++ ++ return rtl_enable(tp); ++} ++ + static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, + u32 advertising) + { +@@ -4891,58 +5505,73 @@ static int rtl8152_set_speed(struct r815 + + tp->mii.force_media = 1; + } else { +- u16 anar, tmp1; ++ u16 orig, new1; + u32 support; + + support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL | + RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL; + +- if (tp->mii.supports_gmii) ++ if (tp->mii.supports_gmii) { + support |= RTL_ADVERTISED_1000_FULL; + ++ if (tp->support_2500full) ++ support |= RTL_ADVERTISED_2500_FULL; ++ } ++ + if (!(advertising & support)) + return -EINVAL; + +- anar = r8152_mdio_read(tp, MII_ADVERTISE); +- tmp1 = anar & ~(ADVERTISE_10HALF | ADVERTISE_10FULL | ++ orig = r8152_mdio_read(tp, MII_ADVERTISE); ++ new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL); + if (advertising & RTL_ADVERTISED_10_HALF) { +- tmp1 |= ADVERTISE_10HALF; ++ new1 |= ADVERTISE_10HALF; + tp->ups_info.speed_duplex = NWAY_10M_HALF; + } + if (advertising & RTL_ADVERTISED_10_FULL) { +- tmp1 |= ADVERTISE_10FULL; ++ new1 |= ADVERTISE_10FULL; + tp->ups_info.speed_duplex = NWAY_10M_FULL; + } + + if (advertising & RTL_ADVERTISED_100_HALF) { +- tmp1 |= ADVERTISE_100HALF; ++ new1 |= ADVERTISE_100HALF; + tp->ups_info.speed_duplex = NWAY_100M_HALF; + } + if (advertising & RTL_ADVERTISED_100_FULL) { +- tmp1 |= ADVERTISE_100FULL; ++ new1 |= ADVERTISE_100FULL; + tp->ups_info.speed_duplex = NWAY_100M_FULL; + } + +- if (anar != tmp1) { +- r8152_mdio_write(tp, MII_ADVERTISE, tmp1); +- tp->mii.advertising = tmp1; ++ if (orig != new1) { ++ r8152_mdio_write(tp, MII_ADVERTISE, new1); ++ tp->mii.advertising = new1; + } + + if (tp->mii.supports_gmii) { +- u16 gbcr; +- +- gbcr = r8152_mdio_read(tp, MII_CTRL1000); +- tmp1 = gbcr & ~(ADVERTISE_1000FULL | ++ orig = r8152_mdio_read(tp, MII_CTRL1000); ++ new1 = orig & ~(ADVERTISE_1000FULL | + ADVERTISE_1000HALF); + + if (advertising & RTL_ADVERTISED_1000_FULL) { +- tmp1 |= ADVERTISE_1000FULL; ++ new1 |= ADVERTISE_1000FULL; + tp->ups_info.speed_duplex = NWAY_1000M_FULL; + } + +- if (gbcr != tmp1) +- r8152_mdio_write(tp, MII_CTRL1000, tmp1); ++ if (orig != new1) ++ r8152_mdio_write(tp, MII_CTRL1000, new1); ++ } ++ ++ if (tp->support_2500full) { ++ orig = ocp_reg_read(tp, OCP_10GBT_CTRL); ++ new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G; ++ ++ if (advertising & RTL_ADVERTISED_2500_FULL) { ++ new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G; ++ tp->ups_info.speed_duplex = NWAY_2500M_FULL; ++ } ++ ++ if (orig != new1) ++ ocp_reg_write(tp, OCP_10GBT_CTRL, new1); + } + + bmcr = BMCR_ANENABLE | BMCR_ANRESTART; +@@ -5098,6 +5727,253 @@ static void rtl8153b_down(struct r8152 * + r8153_aldps_en(tp, true); + } + ++static void rtl8153c_change_mtu(struct r8152 *tp) ++{ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu)); ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64); ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64); ++ ++ /* Adjust the tx fifo free credit full threshold, otherwise ++ * the fifo would be too small to send a jumbo frame packet. ++ */ ++ if (tp->netdev->mtu < 8000) ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8); ++ else ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8); ++} ++ ++static void rtl8153c_up(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ ++ r8153b_u1u2en(tp, false); ++ r8153_u2p3en(tp, false); ++ r8153_aldps_en(tp, false); ++ ++ rxdy_gated_en(tp, true); ++ r8153_teredo_off(tp); ++ ++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); ++ ocp_data &= ~RCR_ACPT_ALL; ++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); ++ ++ rtl8152_nic_reset(tp); ++ rtl_reset_bmu(tp); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ++ ocp_data &= ~NOW_IS_OOB; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); ++ ocp_data &= ~MCU_BORW_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); ++ ++ wait_oob_link_list_ready(tp); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); ++ ocp_data |= RE_INIT_LL; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); ++ ++ wait_oob_link_list_ready(tp); ++ ++ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); ++ ++ rtl8153c_change_mtu(tp); ++ ++ rtl8152_nic_reset(tp); ++ ++ /* rx share fifo credit full threshold */ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02); ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL); ++ ++ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B); ++ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); ++ ocp_data |= BIT(8); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); ++ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); ++ ocp_data &= ~PLA_MCU_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); ++ ++ r8153_aldps_en(tp, true); ++ r8153b_u1u2en(tp, true); ++} ++ ++static inline u32 fc_pause_on_auto(struct r8152 *tp) ++{ ++ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024); ++} ++ ++static inline u32 fc_pause_off_auto(struct r8152 *tp) ++{ ++ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024); ++} ++ ++static void r8156_fc_parameter(struct r8152 *tp) ++{ ++ u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp); ++ u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp); ++ ++ switch (tp->version) { ++ case RTL_VER_10: ++ case RTL_VER_11: ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 8); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 8); ++ break; ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16); ++ break; ++ default: ++ break; ++ } ++} ++ ++static void rtl8156_change_mtu(struct r8152 *tp) ++{ ++ u32 rx_max_size = mtu_to_size(tp->netdev->mtu); ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size); ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); ++ r8156_fc_parameter(tp); ++ ++ /* TX share fifo free credit full threshold */ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, ++ ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16); ++} ++ ++static void rtl8156_up(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ ++ r8153b_u1u2en(tp, false); ++ r8153_u2p3en(tp, false); ++ r8153_aldps_en(tp, false); ++ ++ rxdy_gated_en(tp, true); ++ r8153_teredo_off(tp); ++ ++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); ++ ocp_data &= ~RCR_ACPT_ALL; ++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); ++ ++ rtl8152_nic_reset(tp); ++ rtl_reset_bmu(tp); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ++ ocp_data &= ~NOW_IS_OOB; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); ++ ocp_data &= ~MCU_BORW_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); ++ ++ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); ++ ++ rtl8156_change_mtu(tp); ++ ++ switch (tp->version) { ++ case RTL_TEST_01: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG); ++ ocp_data |= ACT_ODMA; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data); ++ break; ++ default: ++ break; ++ } ++ ++ /* share FIFO settings */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL); ++ ocp_data &= ~RXFIFO_FULL_MASK; ++ ocp_data |= 0x08; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); ++ ocp_data &= ~PLA_MCU_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION); ++ ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF); ++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data); ++ ++ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400); ++ ++ if (tp->saved_wolopts != __rtl_get_wol(tp)) { ++ netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n"); ++ __rtl_set_wol(tp, tp->saved_wolopts); ++ } ++ ++ r8153_aldps_en(tp, true); ++ r8153_u2p3en(tp, true); ++ ++ if (tp->udev->speed >= USB_SPEED_SUPER) ++ r8153b_u1u2en(tp, true); ++} ++ ++static void rtl8156_down(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) { ++ rtl_drop_queued_tx(tp); ++ return; ++ } ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); ++ ocp_data |= PLA_MCU_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); ++ ++ r8153b_u1u2en(tp, false); ++ r8153_u2p3en(tp, false); ++ r8153b_power_cut_en(tp, false); ++ r8153_aldps_en(tp, false); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ++ ocp_data &= ~NOW_IS_OOB; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); ++ ++ rtl_disable(tp); ++ rtl_reset_bmu(tp); ++ ++ /* Clear teredo wake event. bit[15:8] is the teredo wakeup ++ * type. Set it to zero. bits[7:0] are the W1C bits about ++ * the events. Set them to all 1 to clear them. ++ */ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ++ ocp_data |= NOW_IS_OOB; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); ++ ++ rtl_rx_vlan_en(tp, true); ++ rxdy_gated_en(tp, false); ++ ++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); ++ ocp_data |= RCR_APM | RCR_AM | RCR_AB; ++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); ++ ++ r8153_aldps_en(tp, true); ++} ++ + static bool rtl8152_in_nway(struct r8152 *tp) + { + u16 nway_state; +@@ -5128,7 +6004,7 @@ static void set_carrier(struct r8152 *tp + { + struct net_device *netdev = tp->netdev; + struct napi_struct *napi = &tp->napi; +- u8 speed; ++ u16 speed; + + speed = rtl8152_get_speed(tp); + +@@ -5141,7 +6017,7 @@ static void set_carrier(struct r8152 *tp + rtl_start_rx(tp); + clear_bit(RTL8152_SET_RX_MODE, &tp->flags); + _rtl8152_set_rx_mode(netdev); +- napi_enable(&tp->napi); ++ napi_enable(napi); + netif_wake_queue(netdev); + netif_info(tp, link, netdev, "carrier on\n"); + } else if (netif_queue_stopped(netdev) && +@@ -5521,14 +6397,9 @@ static void r8153_init(struct r8152 *tp) + + ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); + +- /* MAC clock speed down */ +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); +- + r8153_power_cut_en(tp, false); + rtl_runtime_suspend_enable(tp, false); ++ r8153_mac_clk_speed_down(tp, false); + r8153_u1u2en(tp, true); + usb_enable_lpm(tp->udev); + +@@ -5621,9 +6492,7 @@ static void r8153b_init(struct r8152 *tp + usb_enable_lpm(tp->udev); + + /* MAC clock speed down */ +- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); +- ocp_data |= MAC_CLK_SPDWN_EN; +- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); ++ r8153_mac_clk_speed_down(tp, true); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); + ocp_data &= ~PLA_MCU_SPDWN_EN; +@@ -5652,6 +6521,1069 @@ static void r8153b_init(struct r8152 *tp + r8152_led_configuration(tp); + } + ++static void r8153c_init(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 data; ++ int i; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ ++ r8153b_u1u2en(tp, false); ++ ++ /* Disable spi_en */ ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5); ++ ocp_data &= ~BIT(3); ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data); ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0); ++ ocp_data |= BIT(1); ++ ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data); ++ ++ for (i = 0; i < 500; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & ++ AUTOLOAD_DONE) ++ break; ++ ++ msleep(20); ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ } ++ ++ data = r8153_phy_status(tp, 0); ++ ++ data = r8152_mdio_read(tp, MII_BMCR); ++ if (data & BMCR_PDOWN) { ++ data &= ~BMCR_PDOWN; ++ r8152_mdio_write(tp, MII_BMCR, data); ++ } ++ ++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); ++ ++ r8153_u2p3en(tp, false); ++ ++ /* MSC timer = 0xfff * 8ms = 32760 ms */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); ++ ++ r8153b_power_cut_en(tp, false); ++ r8153c_ups_en(tp, false); ++ r8153_queue_wake(tp, false); ++ rtl_runtime_suspend_enable(tp, false); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); ++ if (rtl8152_get_speed(tp) & LINK_STATUS) ++ ocp_data |= CUR_LINK_OK; ++ else ++ ocp_data &= ~CUR_LINK_OK; ++ ++ ocp_data |= POLL_LINK_CHG; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); ++ ++ r8153b_u1u2en(tp, true); ++ ++ usb_enable_lpm(tp->udev); ++ ++ /* MAC clock speed down */ ++ r8153_mac_clk_speed_down(tp, true); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2); ++ ocp_data &= ~BIT(7); ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data); ++ ++ set_bit(GREEN_ETHERNET, &tp->flags); ++ ++ /* rx aggregation */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); ++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ rtl_tally_reset(tp); ++ ++ tp->coalesce = 15000; /* 15 us */ ++} ++ ++static void r8156_hw_phy_cfg(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 data; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); ++ if (ocp_data & PCUT_STATUS) { ++ ocp_data &= ~PCUT_STATUS; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); ++ } ++ ++ data = r8153_phy_status(tp, 0); ++ switch (data) { ++ case PHY_STAT_EXT_INIT: ++ rtl8152_apply_firmware(tp, true); ++ ++ data = ocp_reg_read(tp, 0xa468); ++ data &= ~(BIT(3) | BIT(1)); ++ ocp_reg_write(tp, 0xa468, data); ++ break; ++ case PHY_STAT_LAN_ON: ++ case PHY_STAT_PWRDN: ++ default: ++ rtl8152_apply_firmware(tp, false); ++ break; ++ } ++ ++ /* disable ALDPS before updating the PHY parameters */ ++ r8153_aldps_en(tp, false); ++ ++ /* disable EEE before updating the PHY parameters */ ++ rtl_eee_enable(tp, false); ++ ++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); ++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); ++ ocp_data |= PFM_PWM_SWITCH; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); ++ ++ switch (tp->version) { ++ case RTL_VER_10: ++ data = ocp_reg_read(tp, 0xad40); ++ data &= ~0x3ff; ++ data |= BIT(7) | BIT(2); ++ ocp_reg_write(tp, 0xad40, data); ++ ++ data = ocp_reg_read(tp, 0xad4e); ++ data |= BIT(4); ++ ocp_reg_write(tp, 0xad4e, data); ++ data = ocp_reg_read(tp, 0xad16); ++ data &= ~0x3ff; ++ data |= 0x6; ++ ocp_reg_write(tp, 0xad16, data); ++ data = ocp_reg_read(tp, 0xad32); ++ data &= ~0x3f; ++ data |= 6; ++ ocp_reg_write(tp, 0xad32, data); ++ data = ocp_reg_read(tp, 0xac08); ++ data &= ~(BIT(12) | BIT(8)); ++ ocp_reg_write(tp, 0xac08, data); ++ data = ocp_reg_read(tp, 0xac8a); ++ data |= BIT(12) | BIT(13) | BIT(14); ++ data &= ~BIT(15); ++ ocp_reg_write(tp, 0xac8a, data); ++ data = ocp_reg_read(tp, 0xad18); ++ data |= BIT(10); ++ ocp_reg_write(tp, 0xad18, data); ++ data = ocp_reg_read(tp, 0xad1a); ++ data |= 0x3ff; ++ ocp_reg_write(tp, 0xad1a, data); ++ data = ocp_reg_read(tp, 0xad1c); ++ data |= 0x3ff; ++ ocp_reg_write(tp, 0xad1c, data); ++ ++ data = sram_read(tp, 0x80ea); ++ data &= ~0xff00; ++ data |= 0xc400; ++ sram_write(tp, 0x80ea, data); ++ data = sram_read(tp, 0x80eb); ++ data &= ~0x0700; ++ data |= 0x0300; ++ sram_write(tp, 0x80eb, data); ++ data = sram_read(tp, 0x80f8); ++ data &= ~0xff00; ++ data |= 0x1c00; ++ sram_write(tp, 0x80f8, data); ++ data = sram_read(tp, 0x80f1); ++ data &= ~0xff00; ++ data |= 0x3000; ++ sram_write(tp, 0x80f1, data); ++ ++ data = sram_read(tp, 0x80fe); ++ data &= ~0xff00; ++ data |= 0xa500; ++ sram_write(tp, 0x80fe, data); ++ data = sram_read(tp, 0x8102); ++ data &= ~0xff00; ++ data |= 0x5000; ++ sram_write(tp, 0x8102, data); ++ data = sram_read(tp, 0x8015); ++ data &= ~0xff00; ++ data |= 0x3300; ++ sram_write(tp, 0x8015, data); ++ data = sram_read(tp, 0x8100); ++ data &= ~0xff00; ++ data |= 0x7000; ++ sram_write(tp, 0x8100, data); ++ data = sram_read(tp, 0x8014); ++ data &= ~0xff00; ++ data |= 0xf000; ++ sram_write(tp, 0x8014, data); ++ data = sram_read(tp, 0x8016); ++ data &= ~0xff00; ++ data |= 0x6500; ++ sram_write(tp, 0x8016, data); ++ data = sram_read(tp, 0x80dc); ++ data &= ~0xff00; ++ data |= 0xed00; ++ sram_write(tp, 0x80dc, data); ++ data = sram_read(tp, 0x80df); ++ data |= BIT(8); ++ sram_write(tp, 0x80df, data); ++ data = sram_read(tp, 0x80e1); ++ data &= ~BIT(8); ++ sram_write(tp, 0x80e1, data); ++ ++ data = ocp_reg_read(tp, 0xbf06); ++ data &= ~0x003f; ++ data |= 0x0038; ++ ocp_reg_write(tp, 0xbf06, data); ++ ++ sram_write(tp, 0x819f, 0xddb6); ++ ++ ocp_reg_write(tp, 0xbc34, 0x5555); ++ data = ocp_reg_read(tp, 0xbf0a); ++ data &= ~0x0e00; ++ data |= 0x0a00; ++ ocp_reg_write(tp, 0xbf0a, data); ++ ++ data = ocp_reg_read(tp, 0xbd2c); ++ data &= ~BIT(13); ++ ocp_reg_write(tp, 0xbd2c, data); ++ break; ++ case RTL_VER_11: ++ data = ocp_reg_read(tp, 0xad16); ++ data |= 0x3ff; ++ ocp_reg_write(tp, 0xad16, data); ++ data = ocp_reg_read(tp, 0xad32); ++ data &= ~0x3f; ++ data |= 6; ++ ocp_reg_write(tp, 0xad32, data); ++ data = ocp_reg_read(tp, 0xac08); ++ data &= ~(BIT(12) | BIT(8)); ++ ocp_reg_write(tp, 0xac08, data); ++ data = ocp_reg_read(tp, 0xacc0); ++ data &= ~0x3; ++ data |= BIT(1); ++ ocp_reg_write(tp, 0xacc0, data); ++ data = ocp_reg_read(tp, 0xad40); ++ data &= ~0xe7; ++ data |= BIT(6) | BIT(2); ++ ocp_reg_write(tp, 0xad40, data); ++ data = ocp_reg_read(tp, 0xac14); ++ data &= ~BIT(7); ++ ocp_reg_write(tp, 0xac14, data); ++ data = ocp_reg_read(tp, 0xac80); ++ data &= ~(BIT(8) | BIT(9)); ++ ocp_reg_write(tp, 0xac80, data); ++ data = ocp_reg_read(tp, 0xac5e); ++ data &= ~0x7; ++ data |= BIT(1); ++ ocp_reg_write(tp, 0xac5e, data); ++ ocp_reg_write(tp, 0xad4c, 0x00a8); ++ ocp_reg_write(tp, 0xac5c, 0x01ff); ++ data = ocp_reg_read(tp, 0xac8a); ++ data &= ~0xf0; ++ data |= BIT(4) | BIT(5); ++ ocp_reg_write(tp, 0xac8a, data); ++ ocp_reg_write(tp, 0xb87c, 0x8157); ++ data = ocp_reg_read(tp, 0xb87e); ++ data &= ~0xff00; ++ data |= 0x0500; ++ ocp_reg_write(tp, 0xb87e, data); ++ ocp_reg_write(tp, 0xb87c, 0x8159); ++ data = ocp_reg_read(tp, 0xb87e); ++ data &= ~0xff00; ++ data |= 0x0700; ++ ocp_reg_write(tp, 0xb87e, data); ++ ++ /* AAGC */ ++ ocp_reg_write(tp, 0xb87c, 0x80a2); ++ ocp_reg_write(tp, 0xb87e, 0x0153); ++ ocp_reg_write(tp, 0xb87c, 0x809c); ++ ocp_reg_write(tp, 0xb87e, 0x0153); ++ ++ /* EEE parameter */ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG); ++ ocp_data |= EN_XG_LIP | EN_G_LIP; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data); ++ ++ sram_write(tp, 0x8257, 0x020f); /* XG PLL */ ++ sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */ ++ ++ if (rtl_phy_patch_request(tp, true, true)) ++ return; ++ ++ /* Advance EEE */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ ocp_data |= EEE_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ ++ data = ocp_reg_read(tp, OCP_DOWN_SPEED); ++ data &= ~(EN_EEE_100 | EN_EEE_1000); ++ data |= EN_10M_CLKDIV; ++ ocp_reg_write(tp, OCP_DOWN_SPEED, data); ++ tp->ups_info._10m_ckdiv = true; ++ tp->ups_info.eee_plloff_100 = false; ++ tp->ups_info.eee_plloff_giga = false; ++ ++ data = ocp_reg_read(tp, OCP_POWER_CFG); ++ data &= ~EEE_CLKDIV_EN; ++ ocp_reg_write(tp, OCP_POWER_CFG, data); ++ tp->ups_info.eee_ckdiv = false; ++ ++ ocp_reg_write(tp, OCP_SYSCLK_CFG, 0); ++ ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5)); ++ tp->ups_info._250m_ckdiv = false; ++ ++ rtl_phy_patch_request(tp, false, true); ++ ++ /* enable ADC Ibias Cal */ ++ data = ocp_reg_read(tp, 0xd068); ++ data |= BIT(13); ++ ocp_reg_write(tp, 0xd068, data); ++ ++ /* enable Thermal Sensor */ ++ data = sram_read(tp, 0x81a2); ++ data &= ~BIT(8); ++ sram_write(tp, 0x81a2, data); ++ data = ocp_reg_read(tp, 0xb54c); ++ data &= ~0xff00; ++ data |= 0xdb00; ++ ocp_reg_write(tp, 0xb54c, data); ++ ++ /* Nway 2.5G Lite */ ++ data = ocp_reg_read(tp, 0xa454); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa454, data); ++ ++ /* CS DSP solution */ ++ data = ocp_reg_read(tp, OCP_10GBT_CTRL); ++ data |= RTL_ADV2_5G_F_R; ++ ocp_reg_write(tp, OCP_10GBT_CTRL, data); ++ data = ocp_reg_read(tp, 0xad4e); ++ data &= ~BIT(4); ++ ocp_reg_write(tp, 0xad4e, data); ++ data = ocp_reg_read(tp, 0xa86a); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa86a, data); ++ ++ /* MDI SWAP */ ++ if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) && ++ (ocp_reg_read(tp, 0xd068) & BIT(1))) { ++ u16 swap_a, swap_b; ++ ++ data = ocp_reg_read(tp, 0xd068); ++ data &= ~0x1f; ++ data |= 0x1; /* p0 */ ++ ocp_reg_write(tp, 0xd068, data); ++ swap_a = ocp_reg_read(tp, 0xd06a); ++ data &= ~0x18; ++ data |= 0x18; /* p3 */ ++ ocp_reg_write(tp, 0xd068, data); ++ swap_b = ocp_reg_read(tp, 0xd06a); ++ data &= ~0x18; /* p0 */ ++ ocp_reg_write(tp, 0xd068, data); ++ ocp_reg_write(tp, 0xd06a, ++ (swap_a & ~0x7ff) | (swap_b & 0x7ff)); ++ data |= 0x18; /* p3 */ ++ ocp_reg_write(tp, 0xd068, data); ++ ocp_reg_write(tp, 0xd06a, ++ (swap_b & ~0x7ff) | (swap_a & 0x7ff)); ++ data &= ~0x18; ++ data |= 0x08; /* p1 */ ++ ocp_reg_write(tp, 0xd068, data); ++ swap_a = ocp_reg_read(tp, 0xd06a); ++ data &= ~0x18; ++ data |= 0x10; /* p2 */ ++ ocp_reg_write(tp, 0xd068, data); ++ swap_b = ocp_reg_read(tp, 0xd06a); ++ data &= ~0x18; ++ data |= 0x08; /* p1 */ ++ ocp_reg_write(tp, 0xd068, data); ++ ocp_reg_write(tp, 0xd06a, ++ (swap_a & ~0x7ff) | (swap_b & 0x7ff)); ++ data &= ~0x18; ++ data |= 0x10; /* p2 */ ++ ocp_reg_write(tp, 0xd068, data); ++ ocp_reg_write(tp, 0xd06a, ++ (swap_b & ~0x7ff) | (swap_a & 0x7ff)); ++ swap_a = ocp_reg_read(tp, 0xbd5a); ++ swap_b = ocp_reg_read(tp, 0xbd5c); ++ ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) | ++ ((swap_b & 0x1f) << 8) | ++ ((swap_b >> 8) & 0x1f)); ++ ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) | ++ ((swap_a & 0x1f) << 8) | ++ ((swap_a >> 8) & 0x1f)); ++ swap_a = ocp_reg_read(tp, 0xbc18); ++ swap_b = ocp_reg_read(tp, 0xbc1a); ++ ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) | ++ ((swap_b & 0x1f) << 8) | ++ ((swap_b >> 8) & 0x1f)); ++ ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) | ++ ((swap_a & 0x1f) << 8) | ++ ((swap_a >> 8) & 0x1f)); ++ } ++ break; ++ default: ++ break; ++ } ++ ++ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); ++ ++ data = ocp_reg_read(tp, 0xa428); ++ data &= ~BIT(9); ++ ocp_reg_write(tp, 0xa428, data); ++ data = ocp_reg_read(tp, 0xa5ea); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa5ea, data); ++ tp->ups_info.lite_mode = 0; ++ ++ if (tp->eee_en) ++ rtl_eee_enable(tp, true); ++ ++ r8153_aldps_en(tp, true); ++ r8152b_enable_fc(tp); ++ r8153_u2p3en(tp, true); ++ ++ set_bit(PHY_RESET, &tp->flags); ++} ++ ++static void r8156b_hw_phy_cfg(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 data; ++ ++ switch (tp->version) { ++ case RTL_VER_12: ++ ocp_reg_write(tp, 0xbf86, 0x9000); ++ data = ocp_reg_read(tp, 0xc402); ++ data |= BIT(10); ++ ocp_reg_write(tp, 0xc402, data); ++ data &= ~BIT(10); ++ ocp_reg_write(tp, 0xc402, data); ++ ocp_reg_write(tp, 0xbd86, 0x1010); ++ ocp_reg_write(tp, 0xbd88, 0x1010); ++ data = ocp_reg_read(tp, 0xbd4e); ++ data &= ~(BIT(10) | BIT(11)); ++ data |= BIT(11); ++ ocp_reg_write(tp, 0xbd4e, data); ++ data = ocp_reg_read(tp, 0xbf46); ++ data &= ~0xf00; ++ data |= 0x700; ++ ocp_reg_write(tp, 0xbf46, data); ++ break; ++ case RTL_VER_13: ++ case RTL_VER_15: ++ r8156b_wait_loading_flash(tp); ++ break; ++ default: ++ break; ++ } ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); ++ if (ocp_data & PCUT_STATUS) { ++ ocp_data &= ~PCUT_STATUS; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); ++ } ++ ++ data = r8153_phy_status(tp, 0); ++ switch (data) { ++ case PHY_STAT_EXT_INIT: ++ rtl8152_apply_firmware(tp, true); ++ ++ data = ocp_reg_read(tp, 0xa466); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa466, data); ++ ++ data = ocp_reg_read(tp, 0xa468); ++ data &= ~(BIT(3) | BIT(1)); ++ ocp_reg_write(tp, 0xa468, data); ++ break; ++ case PHY_STAT_LAN_ON: ++ case PHY_STAT_PWRDN: ++ default: ++ rtl8152_apply_firmware(tp, false); ++ break; ++ } ++ ++ data = r8152_mdio_read(tp, MII_BMCR); ++ if (data & BMCR_PDOWN) { ++ data &= ~BMCR_PDOWN; ++ r8152_mdio_write(tp, MII_BMCR, data); ++ } ++ ++ /* disable ALDPS before updating the PHY parameters */ ++ r8153_aldps_en(tp, false); ++ ++ /* disable EEE before updating the PHY parameters */ ++ rtl_eee_enable(tp, false); ++ ++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); ++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); ++ ocp_data |= PFM_PWM_SWITCH; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); ++ ++ switch (tp->version) { ++ case RTL_VER_12: ++ data = ocp_reg_read(tp, 0xbc08); ++ data |= BIT(3) | BIT(2); ++ ocp_reg_write(tp, 0xbc08, data); ++ ++ data = sram_read(tp, 0x8fff); ++ data &= ~0xff00; ++ data |= 0x0400; ++ sram_write(tp, 0x8fff, data); ++ ++ data = ocp_reg_read(tp, 0xacda); ++ data |= 0xff00; ++ ocp_reg_write(tp, 0xacda, data); ++ data = ocp_reg_read(tp, 0xacde); ++ data |= 0xf000; ++ ocp_reg_write(tp, 0xacde, data); ++ ocp_reg_write(tp, 0xac8c, 0x0ffc); ++ ocp_reg_write(tp, 0xac46, 0xb7b4); ++ ocp_reg_write(tp, 0xac50, 0x0fbc); ++ ocp_reg_write(tp, 0xac3c, 0x9240); ++ ocp_reg_write(tp, 0xac4e, 0x0db4); ++ ocp_reg_write(tp, 0xacc6, 0x0707); ++ ocp_reg_write(tp, 0xacc8, 0xa0d3); ++ ocp_reg_write(tp, 0xad08, 0x0007); ++ ++ ocp_reg_write(tp, 0xb87c, 0x8560); ++ ocp_reg_write(tp, 0xb87e, 0x19cc); ++ ocp_reg_write(tp, 0xb87c, 0x8562); ++ ocp_reg_write(tp, 0xb87e, 0x19cc); ++ ocp_reg_write(tp, 0xb87c, 0x8564); ++ ocp_reg_write(tp, 0xb87e, 0x19cc); ++ ocp_reg_write(tp, 0xb87c, 0x8566); ++ ocp_reg_write(tp, 0xb87e, 0x147d); ++ ocp_reg_write(tp, 0xb87c, 0x8568); ++ ocp_reg_write(tp, 0xb87e, 0x147d); ++ ocp_reg_write(tp, 0xb87c, 0x856a); ++ ocp_reg_write(tp, 0xb87e, 0x147d); ++ ocp_reg_write(tp, 0xb87c, 0x8ffe); ++ ocp_reg_write(tp, 0xb87e, 0x0907); ++ ocp_reg_write(tp, 0xb87c, 0x80d6); ++ ocp_reg_write(tp, 0xb87e, 0x2801); ++ ocp_reg_write(tp, 0xb87c, 0x80f2); ++ ocp_reg_write(tp, 0xb87e, 0x2801); ++ ocp_reg_write(tp, 0xb87c, 0x80f4); ++ ocp_reg_write(tp, 0xb87e, 0x6077); ++ ocp_reg_write(tp, 0xb506, 0x01e7); ++ ++ ocp_reg_write(tp, 0xb87c, 0x8013); ++ ocp_reg_write(tp, 0xb87e, 0x0700); ++ ocp_reg_write(tp, 0xb87c, 0x8fb9); ++ ocp_reg_write(tp, 0xb87e, 0x2801); ++ ocp_reg_write(tp, 0xb87c, 0x8fba); ++ ocp_reg_write(tp, 0xb87e, 0x0100); ++ ocp_reg_write(tp, 0xb87c, 0x8fbc); ++ ocp_reg_write(tp, 0xb87e, 0x1900); ++ ocp_reg_write(tp, 0xb87c, 0x8fbe); ++ ocp_reg_write(tp, 0xb87e, 0xe100); ++ ocp_reg_write(tp, 0xb87c, 0x8fc0); ++ ocp_reg_write(tp, 0xb87e, 0x0800); ++ ocp_reg_write(tp, 0xb87c, 0x8fc2); ++ ocp_reg_write(tp, 0xb87e, 0xe500); ++ ocp_reg_write(tp, 0xb87c, 0x8fc4); ++ ocp_reg_write(tp, 0xb87e, 0x0f00); ++ ocp_reg_write(tp, 0xb87c, 0x8fc6); ++ ocp_reg_write(tp, 0xb87e, 0xf100); ++ ocp_reg_write(tp, 0xb87c, 0x8fc8); ++ ocp_reg_write(tp, 0xb87e, 0x0400); ++ ocp_reg_write(tp, 0xb87c, 0x8fca); ++ ocp_reg_write(tp, 0xb87e, 0xf300); ++ ocp_reg_write(tp, 0xb87c, 0x8fcc); ++ ocp_reg_write(tp, 0xb87e, 0xfd00); ++ ocp_reg_write(tp, 0xb87c, 0x8fce); ++ ocp_reg_write(tp, 0xb87e, 0xff00); ++ ocp_reg_write(tp, 0xb87c, 0x8fd0); ++ ocp_reg_write(tp, 0xb87e, 0xfb00); ++ ocp_reg_write(tp, 0xb87c, 0x8fd2); ++ ocp_reg_write(tp, 0xb87e, 0x0100); ++ ocp_reg_write(tp, 0xb87c, 0x8fd4); ++ ocp_reg_write(tp, 0xb87e, 0xf400); ++ ocp_reg_write(tp, 0xb87c, 0x8fd6); ++ ocp_reg_write(tp, 0xb87e, 0xff00); ++ ocp_reg_write(tp, 0xb87c, 0x8fd8); ++ ocp_reg_write(tp, 0xb87e, 0xf600); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG); ++ ocp_data |= EN_XG_LIP | EN_G_LIP; ++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data); ++ ocp_reg_write(tp, 0xb87c, 0x813d); ++ ocp_reg_write(tp, 0xb87e, 0x390e); ++ ocp_reg_write(tp, 0xb87c, 0x814f); ++ ocp_reg_write(tp, 0xb87e, 0x790e); ++ ocp_reg_write(tp, 0xb87c, 0x80b0); ++ ocp_reg_write(tp, 0xb87e, 0x0f31); ++ data = ocp_reg_read(tp, 0xbf4c); ++ data |= BIT(1); ++ ocp_reg_write(tp, 0xbf4c, data); ++ data = ocp_reg_read(tp, 0xbcca); ++ data |= BIT(9) | BIT(8); ++ ocp_reg_write(tp, 0xbcca, data); ++ ocp_reg_write(tp, 0xb87c, 0x8141); ++ ocp_reg_write(tp, 0xb87e, 0x320e); ++ ocp_reg_write(tp, 0xb87c, 0x8153); ++ ocp_reg_write(tp, 0xb87e, 0x720e); ++ ocp_reg_write(tp, 0xb87c, 0x8529); ++ ocp_reg_write(tp, 0xb87e, 0x050e); ++ data = ocp_reg_read(tp, OCP_EEE_CFG); ++ data &= ~CTAP_SHORT_EN; ++ ocp_reg_write(tp, OCP_EEE_CFG, data); ++ ++ sram_write(tp, 0x816c, 0xc4a0); ++ sram_write(tp, 0x8170, 0xc4a0); ++ sram_write(tp, 0x8174, 0x04a0); ++ sram_write(tp, 0x8178, 0x04a0); ++ sram_write(tp, 0x817c, 0x0719); ++ sram_write(tp, 0x8ff4, 0x0400); ++ sram_write(tp, 0x8ff1, 0x0404); ++ ++ ocp_reg_write(tp, 0xbf4a, 0x001b); ++ ocp_reg_write(tp, 0xb87c, 0x8033); ++ ocp_reg_write(tp, 0xb87e, 0x7c13); ++ ocp_reg_write(tp, 0xb87c, 0x8037); ++ ocp_reg_write(tp, 0xb87e, 0x7c13); ++ ocp_reg_write(tp, 0xb87c, 0x803b); ++ ocp_reg_write(tp, 0xb87e, 0xfc32); ++ ocp_reg_write(tp, 0xb87c, 0x803f); ++ ocp_reg_write(tp, 0xb87e, 0x7c13); ++ ocp_reg_write(tp, 0xb87c, 0x8043); ++ ocp_reg_write(tp, 0xb87e, 0x7c13); ++ ocp_reg_write(tp, 0xb87c, 0x8047); ++ ocp_reg_write(tp, 0xb87e, 0x7c13); ++ ++ ocp_reg_write(tp, 0xb87c, 0x8145); ++ ocp_reg_write(tp, 0xb87e, 0x370e); ++ ocp_reg_write(tp, 0xb87c, 0x8157); ++ ocp_reg_write(tp, 0xb87e, 0x770e); ++ ocp_reg_write(tp, 0xb87c, 0x8169); ++ ocp_reg_write(tp, 0xb87e, 0x0d0a); ++ ocp_reg_write(tp, 0xb87c, 0x817b); ++ ocp_reg_write(tp, 0xb87e, 0x1d0a); ++ ++ data = sram_read(tp, 0x8217); ++ data &= ~0xff00; ++ data |= 0x5000; ++ sram_write(tp, 0x8217, data); ++ data = sram_read(tp, 0x821a); ++ data &= ~0xff00; ++ data |= 0x5000; ++ sram_write(tp, 0x821a, data); ++ sram_write(tp, 0x80da, 0x0403); ++ data = sram_read(tp, 0x80dc); ++ data &= ~0xff00; ++ data |= 0x1000; ++ sram_write(tp, 0x80dc, data); ++ sram_write(tp, 0x80b3, 0x0384); ++ sram_write(tp, 0x80b7, 0x2007); ++ data = sram_read(tp, 0x80ba); ++ data &= ~0xff00; ++ data |= 0x6c00; ++ sram_write(tp, 0x80ba, data); ++ sram_write(tp, 0x80b5, 0xf009); ++ data = sram_read(tp, 0x80bd); ++ data &= ~0xff00; ++ data |= 0x9f00; ++ sram_write(tp, 0x80bd, data); ++ sram_write(tp, 0x80c7, 0xf083); ++ sram_write(tp, 0x80dd, 0x03f0); ++ data = sram_read(tp, 0x80df); ++ data &= ~0xff00; ++ data |= 0x1000; ++ sram_write(tp, 0x80df, data); ++ sram_write(tp, 0x80cb, 0x2007); ++ data = sram_read(tp, 0x80ce); ++ data &= ~0xff00; ++ data |= 0x6c00; ++ sram_write(tp, 0x80ce, data); ++ sram_write(tp, 0x80c9, 0x8009); ++ data = sram_read(tp, 0x80d1); ++ data &= ~0xff00; ++ data |= 0x8000; ++ sram_write(tp, 0x80d1, data); ++ sram_write(tp, 0x80a3, 0x200a); ++ sram_write(tp, 0x80a5, 0xf0ad); ++ sram_write(tp, 0x809f, 0x6073); ++ sram_write(tp, 0x80a1, 0x000b); ++ data = sram_read(tp, 0x80a9); ++ data &= ~0xff00; ++ data |= 0xc000; ++ sram_write(tp, 0x80a9, data); ++ ++ if (rtl_phy_patch_request(tp, true, true)) ++ return; ++ ++ data = ocp_reg_read(tp, 0xb896); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xb896, data); ++ data = ocp_reg_read(tp, 0xb892); ++ data &= ~0xff00; ++ ocp_reg_write(tp, 0xb892, data); ++ ocp_reg_write(tp, 0xb88e, 0xc23e); ++ ocp_reg_write(tp, 0xb890, 0x0000); ++ ocp_reg_write(tp, 0xb88e, 0xc240); ++ ocp_reg_write(tp, 0xb890, 0x0103); ++ ocp_reg_write(tp, 0xb88e, 0xc242); ++ ocp_reg_write(tp, 0xb890, 0x0507); ++ ocp_reg_write(tp, 0xb88e, 0xc244); ++ ocp_reg_write(tp, 0xb890, 0x090b); ++ ocp_reg_write(tp, 0xb88e, 0xc246); ++ ocp_reg_write(tp, 0xb890, 0x0c0e); ++ ocp_reg_write(tp, 0xb88e, 0xc248); ++ ocp_reg_write(tp, 0xb890, 0x1012); ++ ocp_reg_write(tp, 0xb88e, 0xc24a); ++ ocp_reg_write(tp, 0xb890, 0x1416); ++ data = ocp_reg_read(tp, 0xb896); ++ data |= BIT(0); ++ ocp_reg_write(tp, 0xb896, data); ++ ++ rtl_phy_patch_request(tp, false, true); ++ ++ data = ocp_reg_read(tp, 0xa86a); ++ data |= BIT(0); ++ ocp_reg_write(tp, 0xa86a, data); ++ data = ocp_reg_read(tp, 0xa6f0); ++ data |= BIT(0); ++ ocp_reg_write(tp, 0xa6f0, data); ++ ++ ocp_reg_write(tp, 0xbfa0, 0xd70d); ++ ocp_reg_write(tp, 0xbfa2, 0x4100); ++ ocp_reg_write(tp, 0xbfa4, 0xe868); ++ ocp_reg_write(tp, 0xbfa6, 0xdc59); ++ ocp_reg_write(tp, 0xb54c, 0x3c18); ++ data = ocp_reg_read(tp, 0xbfa4); ++ data &= ~BIT(5); ++ ocp_reg_write(tp, 0xbfa4, data); ++ data = sram_read(tp, 0x817d); ++ data |= BIT(12); ++ sram_write(tp, 0x817d, data); ++ break; ++ case RTL_VER_13: ++ /* 2.5G INRX */ ++ data = ocp_reg_read(tp, 0xac46); ++ data &= ~0x00f0; ++ data |= 0x0090; ++ ocp_reg_write(tp, 0xac46, data); ++ data = ocp_reg_read(tp, 0xad30); ++ data &= ~0x0003; ++ data |= 0x0001; ++ ocp_reg_write(tp, 0xad30, data); ++ fallthrough; ++ case RTL_VER_15: ++ /* EEE parameter */ ++ ocp_reg_write(tp, 0xb87c, 0x80f5); ++ ocp_reg_write(tp, 0xb87e, 0x760e); ++ ocp_reg_write(tp, 0xb87c, 0x8107); ++ ocp_reg_write(tp, 0xb87e, 0x360e); ++ ocp_reg_write(tp, 0xb87c, 0x8551); ++ data = ocp_reg_read(tp, 0xb87e); ++ data &= ~0xff00; ++ data |= 0x0800; ++ ocp_reg_write(tp, 0xb87e, data); ++ ++ /* ADC_PGA parameter */ ++ data = ocp_reg_read(tp, 0xbf00); ++ data &= ~0xe000; ++ data |= 0xa000; ++ ocp_reg_write(tp, 0xbf00, data); ++ data = ocp_reg_read(tp, 0xbf46); ++ data &= ~0x0f00; ++ data |= 0x0300; ++ ocp_reg_write(tp, 0xbf46, data); ++ ++ /* Green Table-PGA, 1G full viterbi */ ++ sram_write(tp, 0x8044, 0x2417); ++ sram_write(tp, 0x804a, 0x2417); ++ sram_write(tp, 0x8050, 0x2417); ++ sram_write(tp, 0x8056, 0x2417); ++ sram_write(tp, 0x805c, 0x2417); ++ sram_write(tp, 0x8062, 0x2417); ++ sram_write(tp, 0x8068, 0x2417); ++ sram_write(tp, 0x806e, 0x2417); ++ sram_write(tp, 0x8074, 0x2417); ++ sram_write(tp, 0x807a, 0x2417); ++ ++ /* XG PLL */ ++ data = ocp_reg_read(tp, 0xbf84); ++ data &= ~0xe000; ++ data |= 0xa000; ++ ocp_reg_write(tp, 0xbf84, data); ++ break; ++ default: ++ break; ++ } ++ ++ if (rtl_phy_patch_request(tp, true, true)) ++ return; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4); ++ ocp_data |= EEE_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data); ++ ++ data = ocp_reg_read(tp, OCP_DOWN_SPEED); ++ data &= ~(EN_EEE_100 | EN_EEE_1000); ++ data |= EN_10M_CLKDIV; ++ ocp_reg_write(tp, OCP_DOWN_SPEED, data); ++ tp->ups_info._10m_ckdiv = true; ++ tp->ups_info.eee_plloff_100 = false; ++ tp->ups_info.eee_plloff_giga = false; ++ ++ data = ocp_reg_read(tp, OCP_POWER_CFG); ++ data &= ~EEE_CLKDIV_EN; ++ ocp_reg_write(tp, OCP_POWER_CFG, data); ++ tp->ups_info.eee_ckdiv = false; ++ ++ rtl_phy_patch_request(tp, false, true); ++ ++ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); ++ ++ data = ocp_reg_read(tp, 0xa428); ++ data &= ~BIT(9); ++ ocp_reg_write(tp, 0xa428, data); ++ data = ocp_reg_read(tp, 0xa5ea); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa5ea, data); ++ tp->ups_info.lite_mode = 0; ++ ++ if (tp->eee_en) ++ rtl_eee_enable(tp, true); ++ ++ r8153_aldps_en(tp, true); ++ r8152b_enable_fc(tp); ++ r8153_u2p3en(tp, true); ++ ++ set_bit(PHY_RESET, &tp->flags); ++} ++ ++static void r8156_init(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 data; ++ int i; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP); ++ ocp_data &= ~EN_ALL_SPEED; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data); ++ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION); ++ ocp_data |= BYPASS_MAC_RESET; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data); ++ ++ r8153b_u1u2en(tp, false); ++ ++ for (i = 0; i < 500; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & ++ AUTOLOAD_DONE) ++ break; ++ ++ msleep(20); ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ } ++ ++ data = r8153_phy_status(tp, 0); ++ if (data == PHY_STAT_EXT_INIT) { ++ data = ocp_reg_read(tp, 0xa468); ++ data &= ~(BIT(3) | BIT(1)); ++ ocp_reg_write(tp, 0xa468, data); ++ } ++ ++ data = r8152_mdio_read(tp, MII_BMCR); ++ if (data & BMCR_PDOWN) { ++ data &= ~BMCR_PDOWN; ++ r8152_mdio_write(tp, MII_BMCR, data); ++ } ++ ++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); ++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON); ++ ++ r8153_u2p3en(tp, false); ++ ++ /* MSC timer = 0xfff * 8ms = 32760 ms */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); ++ ++ /* U1/U2/L1 idle timer. 500 us */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); ++ ++ r8153b_power_cut_en(tp, false); ++ r8156_ups_en(tp, false); ++ r8153_queue_wake(tp, false); ++ rtl_runtime_suspend_enable(tp, false); ++ ++ if (tp->udev->speed >= USB_SPEED_SUPER) ++ r8153b_u1u2en(tp, true); ++ ++ usb_enable_lpm(tp->udev); ++ ++ r8156_mac_clk_spd(tp, true); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); ++ ocp_data &= ~PLA_MCU_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); ++ if (rtl8152_get_speed(tp) & LINK_STATUS) ++ ocp_data |= CUR_LINK_OK; ++ else ++ ocp_data &= ~CUR_LINK_OK; ++ ocp_data |= POLL_LINK_CHG; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); ++ ++ set_bit(GREEN_ETHERNET, &tp->flags); ++ ++ /* rx aggregation */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); ++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG); ++ ocp_data |= ACT_ODMA; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data); ++ ++ rtl_tally_reset(tp); ++ ++ tp->coalesce = 15000; /* 15 us */ ++} ++ ++static void r8156b_init(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ u16 data; ++ int i; ++ ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ ++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP); ++ ocp_data &= ~EN_ALL_SPEED; ++ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data); ++ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION); ++ ocp_data |= BYPASS_MAC_RESET; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL); ++ ocp_data |= RX_DETECT8; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); ++ ++ r8153b_u1u2en(tp, false); ++ ++ switch (tp->version) { ++ case RTL_VER_13: ++ case RTL_VER_15: ++ r8156b_wait_loading_flash(tp); ++ break; ++ default: ++ break; ++ } ++ ++ for (i = 0; i < 500; i++) { ++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & ++ AUTOLOAD_DONE) ++ break; ++ ++ msleep(20); ++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) ++ return; ++ } ++ ++ data = r8153_phy_status(tp, 0); ++ if (data == PHY_STAT_EXT_INIT) { ++ data = ocp_reg_read(tp, 0xa468); ++ data &= ~(BIT(3) | BIT(1)); ++ ocp_reg_write(tp, 0xa468, data); ++ ++ data = ocp_reg_read(tp, 0xa466); ++ data &= ~BIT(0); ++ ocp_reg_write(tp, 0xa466, data); ++ } ++ ++ data = r8152_mdio_read(tp, MII_BMCR); ++ if (data & BMCR_PDOWN) { ++ data &= ~BMCR_PDOWN; ++ r8152_mdio_write(tp, MII_BMCR, data); ++ } ++ ++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON); ++ ++ r8153_u2p3en(tp, false); ++ ++ /* MSC timer = 0xfff * 8ms = 32760 ms */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); ++ ++ /* U1/U2/L1 idle timer. 500 us */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); ++ ++ r8153b_power_cut_en(tp, false); ++ r8156_ups_en(tp, false); ++ r8153_queue_wake(tp, false); ++ rtl_runtime_suspend_enable(tp, false); ++ ++ if (tp->udev->speed >= USB_SPEED_SUPER) ++ r8153b_u1u2en(tp, true); ++ ++ usb_enable_lpm(tp->udev); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR); ++ ocp_data &= ~SLOT_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); ++ ocp_data |= FLOW_CTRL_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); ++ ++ /* enable fc timer and set timer to 600 ms. */ ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER, ++ CTRL_TIMER_EN | (600 / 8)); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL); ++ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN)) ++ ocp_data |= FLOW_CTRL_PATCH_2; ++ ocp_data &= ~AUTO_SPEEDUP; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); ++ ocp_data |= FC_PATCH_TASK; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); ++ ++ r8156_mac_clk_spd(tp, true); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3); ++ ocp_data &= ~PLA_MCU_SPDWN_EN; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data); ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); ++ if (rtl8152_get_speed(tp) & LINK_STATUS) ++ ocp_data |= CUR_LINK_OK; ++ else ++ ocp_data &= ~CUR_LINK_OK; ++ ocp_data |= POLL_LINK_CHG; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); ++ ++ set_bit(GREEN_ETHERNET, &tp->flags); ++ ++ /* rx aggregation */ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); ++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ rtl_tally_reset(tp); ++ ++ tp->coalesce = 15000; /* 15 us */ ++} ++ + static int rtl8152_pre_reset(struct usb_interface *intf) + { + struct r8152 *tp = usb_get_intfdata(intf); +@@ -6015,6 +7947,22 @@ int rtl8152_get_link_ksettings(struct ne + + mii_ethtool_get_link_ksettings(&tp->mii, cmd); + ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ cmd->link_modes.supported, tp->support_2500full); ++ ++ if (tp->support_2500full) { ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ cmd->link_modes.advertising, ++ ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G); ++ ++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ cmd->link_modes.lp_advertising, ++ ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G); ++ ++ if (is_speed_2500(rtl8152_get_speed(tp))) ++ cmd->base.speed = SPEED_2500; ++ } ++ + mutex_unlock(&tp->control); + + usb_autopm_put_interface(tp->intf); +@@ -6058,6 +8006,10 @@ static int rtl8152_set_link_ksettings(st + cmd->link_modes.advertising)) + advertising |= RTL_ADVERTISED_1000_FULL; + ++ if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ cmd->link_modes.advertising)) ++ advertising |= RTL_ADVERTISED_2500_FULL; ++ + mutex_lock(&tp->control); + + ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed, +@@ -6647,6 +8599,67 @@ static int rtl_ops_init(struct r8152 *tp + tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; + break; + ++ case RTL_VER_11: ++ tp->eee_en = true; ++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; ++ fallthrough; ++ case RTL_VER_10: ++ ops->init = r8156_init; ++ ops->enable = rtl8156_enable; ++ ops->disable = rtl8153_disable; ++ ops->up = rtl8156_up; ++ ops->down = rtl8156_down; ++ ops->unload = rtl8153_unload; ++ ops->eee_get = r8153_get_eee; ++ ops->eee_set = r8152_set_eee; ++ ops->in_nway = rtl8153_in_nway; ++ ops->hw_phy_cfg = r8156_hw_phy_cfg; ++ ops->autosuspend_en = rtl8156_runtime_enable; ++ ops->change_mtu = rtl8156_change_mtu; ++ tp->rx_buf_sz = 48 * 1024; ++ tp->support_2500full = 1; ++ break; ++ ++ case RTL_VER_12: ++ case RTL_VER_13: ++ tp->support_2500full = 1; ++ fallthrough; ++ case RTL_VER_15: ++ tp->eee_en = true; ++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; ++ ops->init = r8156b_init; ++ ops->enable = rtl8156b_enable; ++ ops->disable = rtl8153_disable; ++ ops->up = rtl8156_up; ++ ops->down = rtl8156_down; ++ ops->unload = rtl8153_unload; ++ ops->eee_get = r8153_get_eee; ++ ops->eee_set = r8152_set_eee; ++ ops->in_nway = rtl8153_in_nway; ++ ops->hw_phy_cfg = r8156b_hw_phy_cfg; ++ ops->autosuspend_en = rtl8156_runtime_enable; ++ ops->change_mtu = rtl8156_change_mtu; ++ tp->rx_buf_sz = 48 * 1024; ++ break; ++ ++ case RTL_VER_14: ++ ops->init = r8153c_init; ++ ops->enable = rtl8153_enable; ++ ops->disable = rtl8153_disable; ++ ops->up = rtl8153c_up; ++ ops->down = rtl8153b_down; ++ ops->unload = rtl8153_unload; ++ ops->eee_get = r8153_get_eee; ++ ops->eee_set = r8152_set_eee; ++ ops->in_nway = rtl8153_in_nway; ++ ops->hw_phy_cfg = r8153c_hw_phy_cfg; ++ ops->autosuspend_en = rtl8153c_runtime_enable; ++ ops->change_mtu = rtl8153c_change_mtu; ++ tp->rx_buf_sz = 32 * 1024; ++ tp->eee_en = true; ++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; ++ break; ++ + default: + ret = -ENODEV; + dev_err(&tp->intf->dev, "Unknown Device\n"); +@@ -6660,11 +8673,13 @@ static int rtl_ops_init(struct r8152 *tp + #define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw" + #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw" + #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw" ++#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw" + + MODULE_FIRMWARE(FIRMWARE_8153A_2); + MODULE_FIRMWARE(FIRMWARE_8153A_3); + MODULE_FIRMWARE(FIRMWARE_8153A_4); + MODULE_FIRMWARE(FIRMWARE_8153B_2); ++MODULE_FIRMWARE(FIRMWARE_8153C_1); + + static int rtl_fw_init(struct r8152 *tp) + { +@@ -6690,6 +8705,11 @@ static int rtl_fw_init(struct r8152 *tp) + rtl_fw->pre_fw = r8153b_pre_firmware_1; + rtl_fw->post_fw = r8153b_post_firmware_1; + break; ++ case RTL_VER_14: ++ rtl_fw->fw_name = FIRMWARE_8153C_1; ++ rtl_fw->pre_fw = r8153b_pre_firmware_1; ++ rtl_fw->post_fw = r8153c_post_firmware_1; ++ break; + default: + break; + } +@@ -6745,6 +8765,27 @@ u8 rtl8152_get_version(struct usb_interf + case 0x6010: + version = RTL_VER_09; + break; ++ case 0x7010: ++ version = RTL_TEST_01; ++ break; ++ case 0x7020: ++ version = RTL_VER_10; ++ break; ++ case 0x7030: ++ version = RTL_VER_11; ++ break; ++ case 0x7400: ++ version = RTL_VER_12; ++ break; ++ case 0x7410: ++ version = RTL_VER_13; ++ break; ++ case 0x6400: ++ version = RTL_VER_14; ++ break; ++ case 0x7420: ++ version = RTL_VER_15; ++ break; + default: + version = RTL_VER_UNKNOWN; + dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data); +@@ -6857,12 +8898,29 @@ static int rtl8152_probe(struct usb_inte + /* MTU range: 68 - 1500 or 9194 */ + netdev->min_mtu = ETH_MIN_MTU; + switch (tp->version) { ++ case RTL_VER_03: ++ case RTL_VER_04: ++ case RTL_VER_05: ++ case RTL_VER_06: ++ case RTL_VER_08: ++ case RTL_VER_09: ++ case RTL_VER_14: ++ netdev->max_mtu = size_to_mtu(9 * 1024); ++ break; ++ case RTL_VER_10: ++ case RTL_VER_11: ++ netdev->max_mtu = size_to_mtu(15 * 1024); ++ break; ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ netdev->max_mtu = size_to_mtu(16 * 1024); ++ break; + case RTL_VER_01: + case RTL_VER_02: +- netdev->max_mtu = ETH_DATA_LEN; +- break; ++ case RTL_VER_07: + default: +- netdev->max_mtu = size_to_mtu(9 * 1024); ++ netdev->max_mtu = ETH_DATA_LEN; + break; + } + +@@ -6878,7 +8936,13 @@ static int rtl8152_probe(struct usb_inte + tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL | + RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL; + if (tp->mii.supports_gmii) { +- tp->speed = SPEED_1000; ++ if (tp->support_2500full && ++ tp->udev->speed >= USB_SPEED_SUPER) { ++ tp->speed = SPEED_2500; ++ tp->advertising |= RTL_ADVERTISED_2500_FULL; ++ } else { ++ tp->speed = SPEED_1000; ++ } + tp->advertising |= RTL_ADVERTISED_1000_FULL; + } + tp->duplex = DUPLEX_FULL; +@@ -6902,7 +8966,11 @@ static int rtl8152_probe(struct usb_inte + set_ethernet_addr(tp); + + usb_set_intfdata(intf, tp); +- netif_napi_add(netdev, &tp->napi, r8152_poll, RTL8152_NAPI_WEIGHT); ++ ++ if (tp->support_2500full) ++ netif_napi_add(netdev, &tp->napi, r8152_poll, 256); ++ else ++ netif_napi_add(netdev, &tp->napi, r8152_poll, 64); + + ret = register_netdev(netdev); + if (ret != 0) { +@@ -6938,7 +9006,8 @@ static void rtl8152_disconnect(struct us + unregister_netdev(tp->netdev); + tasklet_kill(&tp->tx_tl); + cancel_delayed_work_sync(&tp->hw_phy_work); +- tp->rtl_ops.unload(tp); ++ if (tp->rtl_ops.unload) ++ tp->rtl_ops.unload(tp); + rtl8152_release_firmware(tp); + free_netdev(tp->netdev); + } +@@ -6958,13 +9027,28 @@ static void rtl8152_disconnect(struct us + .idProduct = (prod), \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ ++ .bInterfaceProtocol = USB_CDC_PROTO_NONE \ ++}, \ ++{ \ ++ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ ++ USB_DEVICE_ID_MATCH_DEVICE, \ ++ .idVendor = (vend), \ ++ .idProduct = (prod), \ ++ .bInterfaceClass = USB_CLASS_COMM, \ ++ .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + + /* table of devices that work with this driver */ + static const struct usb_device_id rtl8152_table[] = { ++ /* Realtek */ + {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050)}, ++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053)}, + {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)}, + {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, ++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155)}, ++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156)}, ++ ++ /* Microsoft */ + {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)}, + {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)}, + {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)}, diff --git a/target/linux/generic/backport-5.15/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch b/target/linux/generic/backport-5.15/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch new file mode 100644 index 0000000000..943c821b82 --- /dev/null +++ b/target/linux/generic/backport-5.15/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch @@ -0,0 +1,691 @@ +From ca09589a72a0aa17389754fb75a5cd1a5d46818f Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:36 +0800 +Subject: [PATCH] r8152: support PHY firmware for RTL8156 series + +commit 4a51b0e8a0143b0e83d51d9c58c6416c3818a9f2 upstream. + +Support new firmware type and method for RTL8156 series. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 563 +++++++++++++++++++++++++++++++++++++++- + 1 file changed, 561 insertions(+), 2 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -975,8 +975,60 @@ enum rtl8152_fw_flags { + FW_FLAGS_START, + FW_FLAGS_STOP, + FW_FLAGS_NC, ++ FW_FLAGS_NC1, ++ FW_FLAGS_NC2, ++ FW_FLAGS_UC2, ++ FW_FLAGS_UC, ++ FW_FLAGS_SPEED_UP, ++ FW_FLAGS_VER, + }; + ++enum rtl8152_fw_fixup_cmd { ++ FW_FIXUP_AND = 0, ++ FW_FIXUP_OR, ++ FW_FIXUP_NOT, ++ FW_FIXUP_XOR, ++}; ++ ++struct fw_phy_set { ++ __le16 addr; ++ __le16 data; ++} __packed; ++ ++struct fw_phy_speed_up { ++ struct fw_block blk_hdr; ++ __le16 fw_offset; ++ __le16 version; ++ __le16 fw_reg; ++ __le16 reserved; ++ char info[]; ++} __packed; ++ ++struct fw_phy_ver { ++ struct fw_block blk_hdr; ++ struct fw_phy_set ver; ++ __le32 reserved; ++} __packed; ++ ++struct fw_phy_fixup { ++ struct fw_block blk_hdr; ++ struct fw_phy_set setting; ++ __le16 bit_cmd; ++ __le16 reserved; ++} __packed; ++ ++struct fw_phy_union { ++ struct fw_block blk_hdr; ++ __le16 fw_offset; ++ __le16 fw_reg; ++ struct fw_phy_set pre_set[2]; ++ struct fw_phy_set bp[8]; ++ struct fw_phy_set bp_en; ++ u8 pre_num; ++ u8 bp_num; ++ char info[]; ++} __packed; ++ + /** + * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB. + * The layout of the firmware block is: +@@ -1081,6 +1133,15 @@ enum rtl_fw_type { + RTL_FW_PHY_START, + RTL_FW_PHY_STOP, + RTL_FW_PHY_NC, ++ RTL_FW_PHY_FIXUP, ++ RTL_FW_PHY_UNION_NC, ++ RTL_FW_PHY_UNION_NC1, ++ RTL_FW_PHY_UNION_NC2, ++ RTL_FW_PHY_UNION_UC2, ++ RTL_FW_PHY_UNION_UC, ++ RTL_FW_PHY_UNION_MISC, ++ RTL_FW_PHY_SPEED_UP, ++ RTL_FW_PHY_VER, + }; + + enum rtl_version { +@@ -4000,6 +4061,162 @@ static int rtl_post_ram_code(struct r815 + return 0; + } + ++static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy) ++{ ++ u16 fw_offset; ++ u32 length; ++ bool rc = false; ++ ++ switch (tp->version) { ++ case RTL_VER_01: ++ case RTL_VER_02: ++ case RTL_VER_03: ++ case RTL_VER_04: ++ case RTL_VER_05: ++ case RTL_VER_06: ++ case RTL_VER_07: ++ case RTL_VER_08: ++ case RTL_VER_09: ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_14: ++ goto out; ++ case RTL_VER_13: ++ case RTL_VER_15: ++ default: ++ break; ++ } ++ ++ fw_offset = __le16_to_cpu(phy->fw_offset); ++ length = __le32_to_cpu(phy->blk_hdr.length); ++ if (fw_offset < sizeof(*phy) || length <= fw_offset) { ++ dev_err(&tp->intf->dev, "invalid fw_offset\n"); ++ goto out; ++ } ++ ++ length -= fw_offset; ++ if (length & 3) { ++ dev_err(&tp->intf->dev, "invalid block length\n"); ++ goto out; ++ } ++ ++ if (__le16_to_cpu(phy->fw_reg) != 0x9A00) { ++ dev_err(&tp->intf->dev, "invalid register to load firmware\n"); ++ goto out; ++ } ++ ++ rc = true; ++out: ++ return rc; ++} ++ ++static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver) ++{ ++ bool rc = false; ++ ++ switch (tp->version) { ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ break; ++ default: ++ goto out; ++ } ++ ++ if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) { ++ dev_err(&tp->intf->dev, "invalid block length\n"); ++ goto out; ++ } ++ ++ if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) { ++ dev_err(&tp->intf->dev, "invalid phy ver addr\n"); ++ goto out; ++ } ++ ++ rc = true; ++out: ++ return rc; ++} ++ ++static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix) ++{ ++ bool rc = false; ++ ++ switch (tp->version) { ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ break; ++ default: ++ goto out; ++ } ++ ++ if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) { ++ dev_err(&tp->intf->dev, "invalid block length\n"); ++ goto out; ++ } ++ ++ if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD || ++ __le16_to_cpu(fix->setting.data) != BIT(7)) { ++ dev_err(&tp->intf->dev, "invalid phy fixup\n"); ++ goto out; ++ } ++ ++ rc = true; ++out: ++ return rc; ++} ++ ++static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy) ++{ ++ u16 fw_offset; ++ u32 length; ++ bool rc = false; ++ ++ switch (tp->version) { ++ case RTL_VER_10: ++ case RTL_VER_11: ++ case RTL_VER_12: ++ case RTL_VER_13: ++ case RTL_VER_15: ++ break; ++ default: ++ goto out; ++ } ++ ++ fw_offset = __le16_to_cpu(phy->fw_offset); ++ length = __le32_to_cpu(phy->blk_hdr.length); ++ if (fw_offset < sizeof(*phy) || length <= fw_offset) { ++ dev_err(&tp->intf->dev, "invalid fw_offset\n"); ++ goto out; ++ } ++ ++ length -= fw_offset; ++ if (length & 1) { ++ dev_err(&tp->intf->dev, "invalid block length\n"); ++ goto out; ++ } ++ ++ if (phy->pre_num > 2) { ++ dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num); ++ goto out; ++ } ++ ++ if (phy->bp_num > 8) { ++ dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num); ++ goto out; ++ } ++ ++ rc = true; ++out: ++ return rc; ++} ++ + static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy) + { + u32 length; +@@ -4320,6 +4537,10 @@ static long rtl8152_check_firmware(struc + case RTL_FW_PHY_START: + if (test_bit(FW_FLAGS_START, &fw_flags) || + test_bit(FW_FLAGS_NC, &fw_flags) || ++ test_bit(FW_FLAGS_NC1, &fw_flags) || ++ test_bit(FW_FLAGS_NC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || + test_bit(FW_FLAGS_STOP, &fw_flags)) { + dev_err(&tp->intf->dev, + "check PHY_START fail\n"); +@@ -4368,7 +4589,153 @@ static long rtl8152_check_firmware(struc + goto fail; + } + __set_bit(FW_FLAGS_NC, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_NC: ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_NC1, &fw_flags) || ++ test_bit(FW_FLAGS_NC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_NC, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n"); ++ goto fail; ++ } + ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_NC, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_NC1: ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_NC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_NC1, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_NC1, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_NC2: ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_UC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_NC2, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_NC2, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_UC2: ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_UC2, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_UC2, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_UC: ++ if (!test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_UC, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY UC encountered\n"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_UC, &fw_flags); ++ break; ++ case RTL_FW_PHY_UNION_MISC: ++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) { ++ dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n"); ++ goto fail; ++ } ++ break; ++ case RTL_FW_PHY_FIXUP: ++ if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) { ++ dev_err(&tp->intf->dev, "check PHY fixup failed\n"); ++ goto fail; ++ } ++ break; ++ case RTL_FW_PHY_SPEED_UP: ++ if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY firmware encountered"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) { ++ dev_err(&tp->intf->dev, "check PHY speed up failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_SPEED_UP, &fw_flags); ++ break; ++ case RTL_FW_PHY_VER: ++ if (test_bit(FW_FLAGS_START, &fw_flags) || ++ test_bit(FW_FLAGS_NC, &fw_flags) || ++ test_bit(FW_FLAGS_NC1, &fw_flags) || ++ test_bit(FW_FLAGS_NC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC2, &fw_flags) || ++ test_bit(FW_FLAGS_UC, &fw_flags) || ++ test_bit(FW_FLAGS_STOP, &fw_flags)) { ++ dev_err(&tp->intf->dev, "Invalid order to set PHY version\n"); ++ goto fail; ++ } ++ ++ if (test_bit(FW_FLAGS_VER, &fw_flags)) { ++ dev_err(&tp->intf->dev, "multiple PHY version encountered"); ++ goto fail; ++ } ++ ++ if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) { ++ dev_err(&tp->intf->dev, "check PHY version failed\n"); ++ goto fail; ++ } ++ __set_bit(FW_FLAGS_VER, &fw_flags); + break; + default: + dev_warn(&tp->intf->dev, "Unknown type %u is found\n", +@@ -4391,6 +4758,143 @@ fail: + return ret; + } + ++static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait) ++{ ++ u32 len; ++ u8 *data; ++ ++ if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) { ++ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); ++ return; ++ } ++ ++ len = __le32_to_cpu(phy->blk_hdr.length); ++ len -= __le16_to_cpu(phy->fw_offset); ++ data = (u8 *)phy + __le16_to_cpu(phy->fw_offset); ++ ++ if (rtl_phy_patch_request(tp, true, wait)) ++ return; ++ ++ while (len) { ++ u32 ocp_data, size; ++ int i; ++ ++ if (len < 2048) ++ size = len; ++ else ++ size = 2048; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL); ++ ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data); ++ ++ generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB); ++ ++ data += size; ++ len -= size; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL); ++ ocp_data |= POL_GPHY_PATCH; ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data); ++ ++ for (i = 0; i < 1000; i++) { ++ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH)) ++ break; ++ } ++ ++ if (i == 1000) { ++ dev_err(&tp->intf->dev, "ram code speedup mode timeout\n"); ++ return; ++ } ++ } ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); ++ rtl_phy_patch_request(tp, false, wait); ++ ++ if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version)) ++ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info); ++ else ++ dev_err(&tp->intf->dev, "ram code speedup mode fail\n"); ++} ++ ++static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver) ++{ ++ u16 ver_addr, ver; ++ ++ ver_addr = __le16_to_cpu(phy_ver->ver.addr); ++ ver = __le16_to_cpu(phy_ver->ver.data); ++ ++ if (sram_read(tp, ver_addr) >= ver) { ++ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); ++ return 0; ++ } ++ ++ sram_write(tp, ver_addr, ver); ++ ++ dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver); ++ ++ return ver; ++} ++ ++static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix) ++{ ++ u16 addr, data; ++ ++ addr = __le16_to_cpu(fix->setting.addr); ++ data = ocp_reg_read(tp, addr); ++ ++ switch (__le16_to_cpu(fix->bit_cmd)) { ++ case FW_FIXUP_AND: ++ data &= __le16_to_cpu(fix->setting.data); ++ break; ++ case FW_FIXUP_OR: ++ data |= __le16_to_cpu(fix->setting.data); ++ break; ++ case FW_FIXUP_NOT: ++ data &= ~__le16_to_cpu(fix->setting.data); ++ break; ++ case FW_FIXUP_XOR: ++ data ^= __le16_to_cpu(fix->setting.data); ++ break; ++ default: ++ return; ++ } ++ ++ ocp_reg_write(tp, addr, data); ++ ++ dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data); ++} ++ ++static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy) ++{ ++ __le16 *data; ++ u32 length; ++ int i, num; ++ ++ num = phy->pre_num; ++ for (i = 0; i < num; i++) ++ sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr), ++ __le16_to_cpu(phy->pre_set[i].data)); ++ ++ length = __le32_to_cpu(phy->blk_hdr.length); ++ length -= __le16_to_cpu(phy->fw_offset); ++ num = length / 2; ++ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset)); ++ ++ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg)); ++ for (i = 0; i < num; i++) ++ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i])); ++ ++ num = phy->bp_num; ++ for (i = 0; i < num; i++) ++ sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data)); ++ ++ if (phy->bp_num && phy->bp_en.addr) ++ sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data)); ++ ++ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info); ++} ++ + static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy) + { + u16 mode_reg, bp_index; +@@ -4444,6 +4948,12 @@ static void rtl8152_fw_mac_apply(struct + return; + } + ++ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg); ++ if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) { ++ dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB"); ++ return; ++ } ++ + rtl_clear_bp(tp, type); + + /* Enable backup/restore of MACDBG. This is required after clearing PLA +@@ -4479,7 +4989,6 @@ static void rtl8152_fw_mac_apply(struct + ocp_write_word(tp, type, bp_en_addr, + __le16_to_cpu(mac->bp_en_value)); + +- fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg); + if (fw_ver_reg) + ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg, + mac->fw_ver_data); +@@ -4494,7 +5003,7 @@ static void rtl8152_apply_firmware(struc + struct fw_header *fw_hdr; + struct fw_phy_patch_key *key; + u16 key_addr = 0; +- int i; ++ int i, patch_phy = 1; + + if (IS_ERR_OR_NULL(rtl_fw->fw)) + return; +@@ -4516,17 +5025,40 @@ static void rtl8152_apply_firmware(struc + rtl8152_fw_mac_apply(tp, (struct fw_mac *)block); + break; + case RTL_FW_PHY_START: ++ if (!patch_phy) ++ break; + key = (struct fw_phy_patch_key *)block; + key_addr = __le16_to_cpu(key->key_reg); + rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut); + break; + case RTL_FW_PHY_STOP: ++ if (!patch_phy) ++ break; + WARN_ON(!key_addr); + rtl_post_ram_code(tp, key_addr, !power_cut); + break; + case RTL_FW_PHY_NC: + rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block); + break; ++ case RTL_FW_PHY_VER: ++ patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block); ++ break; ++ case RTL_FW_PHY_UNION_NC: ++ case RTL_FW_PHY_UNION_NC1: ++ case RTL_FW_PHY_UNION_NC2: ++ case RTL_FW_PHY_UNION_UC2: ++ case RTL_FW_PHY_UNION_UC: ++ case RTL_FW_PHY_UNION_MISC: ++ if (patch_phy) ++ rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block); ++ break; ++ case RTL_FW_PHY_FIXUP: ++ if (patch_phy) ++ rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block); ++ break; ++ case RTL_FW_PHY_SPEED_UP: ++ rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut); ++ break; + default: + break; + } +@@ -5034,6 +5566,21 @@ static int r8153c_post_firmware_1(struct + return 0; + } + ++static int r8156a_post_firmware_1(struct r8152 *tp) ++{ ++ u32 ocp_data; ++ ++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1); ++ ocp_data |= FW_IP_RESET_EN; ++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data); ++ ++ /* Modify U3PHY parameter for compatibility issue */ ++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e); ++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9); ++ ++ return 0; ++} ++ + static void r8153_aldps_en(struct r8152 *tp, bool enable) + { + u16 data; +@@ -8674,12 +9221,16 @@ static int rtl_ops_init(struct r8152 *tp + #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw" + #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw" + #define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw" ++#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw" ++#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw" + + MODULE_FIRMWARE(FIRMWARE_8153A_2); + MODULE_FIRMWARE(FIRMWARE_8153A_3); + MODULE_FIRMWARE(FIRMWARE_8153A_4); + MODULE_FIRMWARE(FIRMWARE_8153B_2); + MODULE_FIRMWARE(FIRMWARE_8153C_1); ++MODULE_FIRMWARE(FIRMWARE_8156A_2); ++MODULE_FIRMWARE(FIRMWARE_8156B_2); + + static int rtl_fw_init(struct r8152 *tp) + { +@@ -8705,6 +9256,14 @@ static int rtl_fw_init(struct r8152 *tp) + rtl_fw->pre_fw = r8153b_pre_firmware_1; + rtl_fw->post_fw = r8153b_post_firmware_1; + break; ++ case RTL_VER_11: ++ rtl_fw->fw_name = FIRMWARE_8156A_2; ++ rtl_fw->post_fw = r8156a_post_firmware_1; ++ break; ++ case RTL_VER_13: ++ case RTL_VER_15: ++ rtl_fw->fw_name = FIRMWARE_8156B_2; ++ break; + case RTL_VER_14: + rtl_fw->fw_name = FIRMWARE_8153C_1; + rtl_fw->pre_fw = r8153b_pre_firmware_1; diff --git a/target/linux/generic/backport-5.15/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch b/target/linux/generic/backport-5.15/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch new file mode 100644 index 0000000000..9ce0e778cf --- /dev/null +++ b/target/linux/generic/backport-5.15/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch @@ -0,0 +1,79 @@ +From 579f58dd2819910354753bc5489fc1588fe9cfe2 Mon Sep 17 00:00:00 2001 +From: Hayes Wang +Date: Fri, 16 Apr 2021 16:04:37 +0800 +Subject: [PATCH] r8152: search the configuration of vendor mode + +commit c2198943e33b100ed21dfb636c8fa6baef841e9d upstream. + +The vendor mode is not always at config #1, so it is necessary to +set the correct configuration number. + +Signed-off-by: Hayes Wang +Signed-off-by: David S. Miller +--- + drivers/net/usb/r8152.c | 39 +++++++++++++++++++++++++++++++++++---- + 1 file changed, 35 insertions(+), 4 deletions(-) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -30,7 +30,7 @@ + #include + + /* Information for net-next */ +-#define NETNEXT_VERSION "11" ++#define NETNEXT_VERSION "12" + + /* Information for net */ + #define NET_VERSION "11" +@@ -8131,6 +8131,39 @@ static void r8156b_init(struct r8152 *tp + tp->coalesce = 15000; /* 15 us */ + } + ++static bool rtl_vendor_mode(struct usb_interface *intf) ++{ ++ struct usb_host_interface *alt = intf->cur_altsetting; ++ struct usb_device *udev; ++ struct usb_host_config *c; ++ int i, num_configs; ++ ++ if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) ++ return true; ++ ++ /* The vendor mode is not always config #1, so to find it out. */ ++ udev = interface_to_usbdev(intf); ++ c = udev->config; ++ num_configs = udev->descriptor.bNumConfigurations; ++ for (i = 0; i < num_configs; (i++, c++)) { ++ struct usb_interface_descriptor *desc = NULL; ++ ++ if (c->desc.bNumInterfaces > 0) ++ desc = &c->intf_cache[0]->altsetting->desc; ++ else ++ continue; ++ ++ if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) { ++ usb_driver_set_configuration(udev, c->desc.bConfigurationValue); ++ break; ++ } ++ } ++ ++ WARN_ON_ONCE(i == num_configs); ++ ++ return false; ++} ++ + static int rtl8152_pre_reset(struct usb_interface *intf) + { + struct r8152 *tp = usb_get_intfdata(intf); +@@ -9369,10 +9402,8 @@ static int rtl8152_probe(struct usb_inte + if (version == RTL_VER_UNKNOWN) + return -ENODEV; + +- if (udev->actconfig->desc.bConfigurationValue != 1) { +- usb_driver_set_configuration(udev, 1); ++ if (!rtl_vendor_mode(intf)) + return -ENODEV; +- } + + if (intf->cur_altsetting->desc.bNumEndpoints < 3) + return -ENODEV; diff --git a/target/linux/generic/backport-5.15/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch b/target/linux/generic/backport-5.15/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch new file mode 100644 index 0000000000..19938704b7 --- /dev/null +++ b/target/linux/generic/backport-5.15/800-v5.13-0001-firmware-bcm47xx_nvram-rename-finding-function-and-i.patch @@ -0,0 +1,80 @@ +From fb009cbdd0693bd633f11e99526617b3d392cfad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 8 Mar 2021 10:03:16 +0100 +Subject: [PATCH] firmware: bcm47xx_nvram: rename finding function and its + variables +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +1. Use "bcm47xx_" function name prefix for consistency +2. It takes flash start as argument so s/iobase/flash_start/ +3. "off" was used for finding flash end so just call it "flash_size" + +Signed-off-by: Rafał Miłecki +Signed-off-by: Thomas Bogendoerfer +--- + drivers/firmware/broadcom/bcm47xx_nvram.c | 24 ++++++++++++----------- + 1 file changed, 13 insertions(+), 11 deletions(-) + +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -48,11 +48,13 @@ static u32 find_nvram_size(void __iomem + return 0; + } + +-/* Probe for NVRAM header */ +-static int nvram_find_and_copy(void __iomem *iobase, u32 lim) ++/** ++ * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it ++ */ ++static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size) + { + struct nvram_header __iomem *header; +- u32 off; ++ size_t flash_size; + u32 size; + + if (nvram_len) { +@@ -61,25 +63,25 @@ static int nvram_find_and_copy(void __io + } + + /* TODO: when nvram is on nand flash check for bad blocks first. */ +- off = FLASH_MIN; +- while (off <= lim) { ++ flash_size = FLASH_MIN; ++ while (flash_size <= res_size) { + /* Windowed flash access */ +- size = find_nvram_size(iobase + off); ++ size = find_nvram_size(flash_start + flash_size); + if (size) { +- header = (struct nvram_header *)(iobase + off - size); ++ header = (struct nvram_header *)(flash_start + flash_size - size); + goto found; + } +- off <<= 1; ++ flash_size <<= 1; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ +- header = (struct nvram_header *)(iobase + 4096); ++ header = (struct nvram_header *)(flash_start + 4096); + if (header->magic == NVRAM_MAGIC) { + size = NVRAM_SPACE; + goto found; + } + +- header = (struct nvram_header *)(iobase + 1024); ++ header = (struct nvram_header *)(flash_start + 1024); + if (header->magic == NVRAM_MAGIC) { + size = NVRAM_SPACE; + goto found; +@@ -124,7 +126,7 @@ int bcm47xx_nvram_init_from_mem(u32 base + if (!iobase) + return -ENOMEM; + +- err = nvram_find_and_copy(iobase, lim); ++ err = bcm47xx_nvram_find_and_copy(iobase, lim); + + iounmap(iobase); + diff --git a/target/linux/generic/backport-5.15/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch b/target/linux/generic/backport-5.15/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch new file mode 100644 index 0000000000..6ab072883d --- /dev/null +++ b/target/linux/generic/backport-5.15/800-v5.13-0002-firmware-bcm47xx_nvram-add-helper-checking-for-NVRAM.patch @@ -0,0 +1,90 @@ +From 0a24b51a3264a3f942a75025ea5ff6133c8989b0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 8 Mar 2021 10:03:17 +0100 +Subject: [PATCH] firmware: bcm47xx_nvram: add helper checking for NVRAM +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This avoids duplicating code doing casting and checking for NVRAM magic. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Thomas Bogendoerfer +--- + drivers/firmware/broadcom/bcm47xx_nvram.c | 30 ++++++++++++++--------- + 1 file changed, 18 insertions(+), 12 deletions(-) + +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -34,14 +34,20 @@ static char nvram_buf[NVRAM_SPACE]; + static size_t nvram_len; + static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; + ++/** ++ * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory ++ */ ++static bool bcm47xx_nvram_is_valid(void __iomem *nvram) ++{ ++ return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC; ++} ++ + static u32 find_nvram_size(void __iomem *end) + { +- struct nvram_header __iomem *header; + int i; + + for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) { +- header = (struct nvram_header *)(end - nvram_sizes[i]); +- if (header->magic == NVRAM_MAGIC) ++ if (bcm47xx_nvram_is_valid(end - nvram_sizes[i])) + return nvram_sizes[i]; + } + +@@ -55,6 +61,7 @@ static int bcm47xx_nvram_find_and_copy(v + { + struct nvram_header __iomem *header; + size_t flash_size; ++ size_t offset; + u32 size; + + if (nvram_len) { +@@ -68,31 +75,30 @@ static int bcm47xx_nvram_find_and_copy(v + /* Windowed flash access */ + size = find_nvram_size(flash_start + flash_size); + if (size) { +- header = (struct nvram_header *)(flash_start + flash_size - size); ++ offset = flash_size - size; + goto found; + } + flash_size <<= 1; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ +- header = (struct nvram_header *)(flash_start + 4096); +- if (header->magic == NVRAM_MAGIC) { +- size = NVRAM_SPACE; ++ ++ offset = 4096; ++ if (bcm47xx_nvram_is_valid(flash_start + offset)) + goto found; +- } + +- header = (struct nvram_header *)(flash_start + 1024); +- if (header->magic == NVRAM_MAGIC) { +- size = NVRAM_SPACE; ++ offset = 1024; ++ if (bcm47xx_nvram_is_valid(flash_start + offset)) + goto found; +- } + + pr_err("no nvram found\n"); + return -ENXIO; + + found: ++ header = (struct nvram_header *)(flash_start + offset); + __ioread32_copy(nvram_buf, header, sizeof(*header) / 4); + nvram_len = ((struct nvram_header *)(nvram_buf))->len; ++ size = res_size - offset; + if (nvram_len > size) { + pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n"); + nvram_len = size; diff --git a/target/linux/generic/backport-5.15/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch b/target/linux/generic/backport-5.15/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch new file mode 100644 index 0000000000..a1351f1197 --- /dev/null +++ b/target/linux/generic/backport-5.15/800-v5.13-0003-firmware-bcm47xx_nvram-extract-code-copying-NVRAM.patch @@ -0,0 +1,80 @@ +From 298923cf999cecd2ef06df126f85a3d68da8c4d8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 8 Mar 2021 10:03:18 +0100 +Subject: [PATCH] firmware: bcm47xx_nvram: extract code copying NVRAM +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This simplifies function finding NVRAM. It doesn't directly deal with +NVRAM structure anymore and is a bit smaller. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Thomas Bogendoerfer +--- + drivers/firmware/broadcom/bcm47xx_nvram.c | 43 +++++++++++++---------- + 1 file changed, 25 insertions(+), 18 deletions(-) + +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -55,11 +55,34 @@ static u32 find_nvram_size(void __iomem + } + + /** ++ * bcm47xx_nvram_copy - copy NVRAM to internal buffer ++ */ ++static void bcm47xx_nvram_copy(void __iomem *nvram_start, size_t res_size) ++{ ++ struct nvram_header __iomem *header = nvram_start; ++ size_t copy_size; ++ ++ copy_size = header->len; ++ if (copy_size > res_size) { ++ pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n"); ++ copy_size = res_size; ++ } ++ if (copy_size >= NVRAM_SPACE) { ++ pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", ++ copy_size, NVRAM_SPACE - 1); ++ copy_size = NVRAM_SPACE - 1; ++ } ++ ++ __ioread32_copy(nvram_buf, nvram_start, DIV_ROUND_UP(copy_size, 4)); ++ nvram_buf[NVRAM_SPACE - 1] = '\0'; ++ nvram_len = copy_size; ++} ++ ++/** + * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it + */ + static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size) + { +- struct nvram_header __iomem *header; + size_t flash_size; + size_t offset; + u32 size; +@@ -95,23 +118,7 @@ static int bcm47xx_nvram_find_and_copy(v + return -ENXIO; + + found: +- header = (struct nvram_header *)(flash_start + offset); +- __ioread32_copy(nvram_buf, header, sizeof(*header) / 4); +- nvram_len = ((struct nvram_header *)(nvram_buf))->len; +- size = res_size - offset; +- if (nvram_len > size) { +- pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n"); +- nvram_len = size; +- } +- if (nvram_len >= NVRAM_SPACE) { +- pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", +- nvram_len, NVRAM_SPACE - 1); +- nvram_len = NVRAM_SPACE - 1; +- } +- /* proceed reading data after header */ +- __ioread32_copy(nvram_buf + sizeof(*header), header + 1, +- DIV_ROUND_UP(nvram_len, 4)); +- nvram_buf[NVRAM_SPACE - 1] = '\0'; ++ bcm47xx_nvram_copy(flash_start + offset, res_size - offset); + + return 0; + } diff --git a/target/linux/generic/backport-5.15/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch b/target/linux/generic/backport-5.15/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch new file mode 100644 index 0000000000..059a13220b --- /dev/null +++ b/target/linux/generic/backport-5.15/800-v5.13-0004-firmware-bcm47xx_nvram-look-for-NVRAM-with-for-inste.patch @@ -0,0 +1,37 @@ +From 98b68324f67236e8c9152976535dc1f27fb67ba8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 8 Mar 2021 10:03:19 +0100 +Subject: [PATCH] firmware: bcm47xx_nvram: look for NVRAM with for instead of + while +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This loop requires variable initialization, stop condition and post +iteration increment. It's pretty much a for loop definition. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Thomas Bogendoerfer +--- + drivers/firmware/broadcom/bcm47xx_nvram.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -93,15 +93,13 @@ static int bcm47xx_nvram_find_and_copy(v + } + + /* TODO: when nvram is on nand flash check for bad blocks first. */ +- flash_size = FLASH_MIN; +- while (flash_size <= res_size) { ++ for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) { + /* Windowed flash access */ + size = find_nvram_size(flash_start + flash_size); + if (size) { + offset = flash_size - size; + goto found; + } +- flash_size <<= 1; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ diff --git a/target/linux/generic/backport-5.15/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch b/target/linux/generic/backport-5.15/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch new file mode 100644 index 0000000000..21d250049e --- /dev/null +++ b/target/linux/generic/backport-5.15/800-v5.13-0005-firmware-bcm47xx_nvram-inline-code-checking-NVRAM-si.patch @@ -0,0 +1,70 @@ +From f52da4ccfec9192e17f5c16260dfdd6d3ea76f65 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 8 Mar 2021 10:03:20 +0100 +Subject: [PATCH] firmware: bcm47xx_nvram: inline code checking NVRAM size +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Separated function was not improving code quality much (or at all). +Moreover it expected possible flash end address as argument and it was +returning NVRAM size. + +The new code always operates on offsets which means less logic and less +calculations. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Thomas Bogendoerfer +--- + drivers/firmware/broadcom/bcm47xx_nvram.c | 25 +++++++---------------- + 1 file changed, 7 insertions(+), 18 deletions(-) + +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -42,18 +42,6 @@ static bool bcm47xx_nvram_is_valid(void + return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC; + } + +-static u32 find_nvram_size(void __iomem *end) +-{ +- int i; +- +- for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) { +- if (bcm47xx_nvram_is_valid(end - nvram_sizes[i])) +- return nvram_sizes[i]; +- } +- +- return 0; +-} +- + /** + * bcm47xx_nvram_copy - copy NVRAM to internal buffer + */ +@@ -85,7 +73,7 @@ static int bcm47xx_nvram_find_and_copy(v + { + size_t flash_size; + size_t offset; +- u32 size; ++ int i; + + if (nvram_len) { + pr_warn("nvram already initialized\n"); +@@ -93,12 +81,13 @@ static int bcm47xx_nvram_find_and_copy(v + } + + /* TODO: when nvram is on nand flash check for bad blocks first. */ ++ ++ /* Try every possible flash size and check for NVRAM at its end */ + for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) { +- /* Windowed flash access */ +- size = find_nvram_size(flash_start + flash_size); +- if (size) { +- offset = flash_size - size; +- goto found; ++ for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) { ++ offset = flash_size - nvram_sizes[i]; ++ if (bcm47xx_nvram_is_valid(flash_start + offset)) ++ goto found; + } + } + diff --git a/target/linux/generic/backport-5.15/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch b/target/linux/generic/backport-5.15/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch new file mode 100644 index 0000000000..6b75b08717 --- /dev/null +++ b/target/linux/generic/backport-5.15/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch @@ -0,0 +1,88 @@ +From 2d5ba37461013253d2ff0a3641b727fd32ea97a9 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Tue, 23 Feb 2021 18:44:53 +0100 +Subject: [PATCH 1/3] usb: ehci: add spurious flag to disable overcurrent + checking +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds an ignore_oc flag which can be set by EHCI controller +not supporting or wanting to disable overcurrent checking. The EHCI +platform data in include/linux/usb/ehci_pdriver.h is also augmented to +take advantage of this new flag. + +Signed-off-by: Florian Fainelli +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210223174455.1378-2-noltari@gmail.com +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/host/ehci-hcd.c | 2 +- + drivers/usb/host/ehci-hub.c | 4 ++-- + drivers/usb/host/ehci-platform.c | 2 ++ + drivers/usb/host/ehci.h | 1 + + include/linux/usb/ehci_pdriver.h | 1 + + 5 files changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -660,7 +660,7 @@ static int ehci_run (struct usb_hcd *hcd + "USB %x.%x started, EHCI %x.%02x%s\n", + ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), + temp >> 8, temp & 0xff, +- ignore_oc ? ", overcurrent ignored" : ""); ++ (ignore_oc || ehci->spurious_oc) ? ", overcurrent ignored" : ""); + + ehci_writel(ehci, INTR_MASK, + &ehci->regs->intr_enable); /* Turn On Interrupts */ +--- a/drivers/usb/host/ehci-hub.c ++++ b/drivers/usb/host/ehci-hub.c +@@ -643,7 +643,7 @@ ehci_hub_status_data (struct usb_hcd *hc + * always set, seem to clear PORT_OCC and PORT_CSC when writing to + * PORT_POWER; that's surprising, but maybe within-spec. + */ +- if (!ignore_oc) ++ if (!ignore_oc && !ehci->spurious_oc) + mask = PORT_CSC | PORT_PEC | PORT_OCC; + else + mask = PORT_CSC | PORT_PEC; +@@ -1013,7 +1013,7 @@ int ehci_hub_control( + if (temp & PORT_PEC) + status |= USB_PORT_STAT_C_ENABLE << 16; + +- if ((temp & PORT_OCC) && !ignore_oc){ ++ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){ + status |= USB_PORT_STAT_C_OVERCURRENT << 16; + + /* +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -333,6 +333,8 @@ static int ehci_platform_probe(struct pl + hcd->has_tt = 1; + if (pdata->reset_on_resume) + priv->reset_on_resume = true; ++ if (pdata->spurious_oc) ++ ehci->spurious_oc = 1; + + #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -219,6 +219,7 @@ struct ehci_hcd { /* one per controlle + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned is_aspeed:1; ++ unsigned spurious_oc:1; + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) +--- a/include/linux/usb/ehci_pdriver.h ++++ b/include/linux/usb/ehci_pdriver.h +@@ -50,6 +50,7 @@ struct usb_ehci_pdata { + unsigned no_io_watchdog:1; + unsigned reset_on_resume:1; + unsigned dma_mask_64:1; ++ unsigned spurious_oc:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); diff --git a/target/linux/generic/backport-5.15/811-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch b/target/linux/generic/backport-5.15/811-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch new file mode 100644 index 0000000000..0094d47718 --- /dev/null +++ b/target/linux/generic/backport-5.15/811-v5.13-usb-host-ehci-platform-add-spurious_oc-DT-support.patch @@ -0,0 +1,31 @@ +From 4da57dbbffdfa7fe4e2b70b047fc5ff95ff25a3d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Tue, 23 Feb 2021 18:44:55 +0100 +Subject: [PATCH 3/3] usb: host: ehci-platform: add spurious_oc DT support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Over-current reporting isn't supported on some platforms such as bcm63xx. +These devices will incorrectly report over-current if this flag isn't properly +activated. + +Signed-off-by: Álvaro Fernández Rojas +Link: https://lore.kernel.org/r/20210223174455.1378-4-noltari@gmail.com +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/host/ehci-platform.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -286,6 +286,9 @@ static int ehci_platform_probe(struct pl + if (of_property_read_bool(dev->dev.of_node, "big-endian")) + ehci->big_endian_mmio = ehci->big_endian_desc = 1; + ++ if (of_property_read_bool(dev->dev.of_node, "spurious-oc")) ++ ehci->spurious_oc = 1; ++ + if (of_property_read_bool(dev->dev.of_node, + "needs-reset-on-resume")) + priv->reset_on_resume = true; diff --git a/target/linux/generic/backport-5.15/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch b/target/linux/generic/backport-5.15/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch new file mode 100644 index 0000000000..8ca2b78f74 --- /dev/null +++ b/target/linux/generic/backport-5.15/820-v5.13-make-pci_host_common_probe-declare-its-reliance-on-msi-domains.patch @@ -0,0 +1,34 @@ +From 9ec37efb87832b578d7972fc80b04d94f5d2bbe3 Mon Sep 17 00:00:00 2001 +From: Marc Zyngier +Date: Tue, 30 Mar 2021 16:11:42 +0100 +Subject: PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI + domains + +The generic PCI host driver relies on MSI domains for MSIs to +be provided to its end-points. Make this dependency explicit. + +This cures the warnings occuring on arm/arm64 VMs when booted +with PCI virtio devices and no MSI controller (no GICv3 ITS, +for example). + +It is likely that other drivers will need to express the same +dependency. + +Link: https://lore.kernel.org/r/20210330151145.997953-12-maz@kernel.org +Signed-off-by: Marc Zyngier +Signed-off-by: Lorenzo Pieralisi +Acked-by: Bjorn Helgaas +--- + drivers/pci/controller/pci-host-common.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/pci/controller/pci-host-common.c ++++ b/drivers/pci/controller/pci-host-common.c +@@ -77,6 +77,7 @@ int pci_host_common_probe(struct platfor + + bridge->sysdata = cfg; + bridge->ops = (struct pci_ops *)&ops->pci_ops; ++ bridge->msi_domain = true; + + platform_set_drvdata(pdev, bridge); + diff --git a/target/linux/generic/backport-5.15/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch b/target/linux/generic/backport-5.15/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch new file mode 100644 index 0000000000..854dc34c42 --- /dev/null +++ b/target/linux/generic/backport-5.15/821-v5.13-let-pci-host-bridges-declar-their-reliance-on-msi-domains.patch @@ -0,0 +1,44 @@ +From 94e89b145371b68fa0ea294855adebcd03e0522e Mon Sep 17 00:00:00 2001 +From: Marc Zyngier +Date: Tue, 30 Mar 2021 16:11:41 +0100 +Subject: PCI/MSI: Let PCI host bridges declare their reliance on MSI domains + +There is a whole class of host bridges that cannot know whether +MSIs will be provided or not, as they rely on other blocks +to provide the MSI functionnality, using MSI domains. This is +the case for example on systems that use the ARM GIC architecture. + +Introduce a new attribute ('msi_domain') indicating that implicit +dependency, and use this property to set the NO_MSI flag when +no MSI domain is found at probe time. + +Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org +Signed-off-by: Marc Zyngier +Signed-off-by: Lorenzo Pieralisi +Acked-by: Bjorn Helgaas +--- + drivers/pci/probe.c | 2 ++ + include/linux/pci.h | 1 + + 2 files changed, 3 insertions(+) + +--- a/drivers/pci/probe.c ++++ b/drivers/pci/probe.c +@@ -925,6 +925,8 @@ static int pci_register_host_bridge(stru + device_enable_async_suspend(bus->bridge); + pci_set_bus_of_node(bus); + pci_set_bus_msi_domain(bus); ++ if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev)) ++ bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI; + + if (!parent) + set_dev_node(bus->bridge, pcibus_to_node(bus)); +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -547,6 +547,7 @@ struct pci_host_bridge { + unsigned int native_dpc:1; /* OS may use PCIe DPC */ + unsigned int preserve_config:1; /* Preserve FW resource setup */ + unsigned int size_windows:1; /* Enable root bus sizing */ ++ unsigned int msi_domain:1; /* Bridge wants MSI domain */ + + /* Resource alignment requirements */ + resource_size_t (*align_resource)(struct pci_dev *dev, diff --git a/target/linux/generic/backport-5.15/822-v5.13-advertise-lack-of-built-in-msi-handling.patch b/target/linux/generic/backport-5.15/822-v5.13-advertise-lack-of-built-in-msi-handling.patch new file mode 100644 index 0000000000..c11aedd814 --- /dev/null +++ b/target/linux/generic/backport-5.15/822-v5.13-advertise-lack-of-built-in-msi-handling.patch @@ -0,0 +1,59 @@ +From 645e9c38383d7fcde2784ee537fa18ec9bed54d9 Mon Sep 17 00:00:00 2001 +From: Thomas Gleixner +Date: Tue, 30 Mar 2021 16:11:43 +0100 +Subject: PCI: mediatek: Advertise lack of built-in MSI handling + +Some Mediatek host bridges cannot handle MSIs, which is sad. +This also results in an ugly warning at device probe time, +as the core PCI code wasn't told that MSIs were not available. + +Advertise this fact to the rest of the core PCI code by +using the 'msi_domain' attribute, which still opens the possibility +for another block to provide the MSI functionnality. + +[maz: commit message, switched over to msi_domain attribute] + +Link: https://lore.kernel.org/r/20210330151145.997953-13-maz@kernel.org +Reported-by: Frank Wunderlich +Signed-off-by: Thomas Gleixner +Signed-off-by: Marc Zyngier +Signed-off-by: Lorenzo Pieralisi +Acked-by: Bjorn Helgaas +--- + drivers/pci/controller/pcie-mediatek.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/pci/controller/pcie-mediatek.c ++++ b/drivers/pci/controller/pcie-mediatek.c +@@ -143,6 +143,7 @@ struct mtk_pcie_port; + * struct mtk_pcie_soc - differentiate between host generations + * @need_fix_class_id: whether this host's class ID needed to be fixed or not + * @need_fix_device_id: whether this host's device ID needed to be fixed or not ++ * @no_msi: Bridge has no MSI support, and relies on an external block + * @device_id: device ID which this host need to be fixed + * @ops: pointer to configuration access functions + * @startup: pointer to controller setting functions +@@ -151,6 +152,7 @@ struct mtk_pcie_port; + struct mtk_pcie_soc { + bool need_fix_class_id; + bool need_fix_device_id; ++ bool no_msi; + unsigned int device_id; + struct pci_ops *ops; + int (*startup)(struct mtk_pcie_port *port); +@@ -1087,6 +1089,7 @@ static int mtk_pcie_probe(struct platfor + + host->ops = pcie->soc->ops; + host->sysdata = pcie; ++ host->msi_domain = pcie->soc->no_msi; + + err = pci_host_probe(host); + if (err) +@@ -1176,6 +1179,7 @@ static const struct dev_pm_ops mtk_pcie_ + }; + + static const struct mtk_pcie_soc mtk_pcie_soc_v1 = { ++ .no_msi = true, + .ops = &mtk_pcie_ops, + .startup = mtk_pcie_startup_port, + }; diff --git a/target/linux/generic/backport-5.15/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch b/target/linux/generic/backport-5.15/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch new file mode 100644 index 0000000000..75b9947392 --- /dev/null +++ b/target/linux/generic/backport-5.15/830-v5.14-leds-lp55xx-Initialize-enable-GPIO-direction-to-outp.patch @@ -0,0 +1,28 @@ +From a5d3d1adc95f4ac5968b7a77ee95a3abbbb96f49 Mon Sep 17 00:00:00 2001 +From: Doug Zobel +Date: Mon, 10 May 2021 15:40:00 -0500 +Subject: [PATCH] leds: lp55xx: Initialize enable GPIO direction to output + +The "Convert to use GPIO descriptors" commit changed the +initialization of the enable GPIO from GPIOF_DIR_OUT to +GPIOD_ASIS. This breaks systems where the GPIO does not +default to output. Changing the enable initialization +to GPIOD_OUT_LOW. + +Signed-off-by: Doug Zobel +Signed-off-by: Pavel Machek +--- + drivers/leds/leds-lp55xx-common.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/leds/leds-lp55xx-common.c ++++ b/drivers/leds/leds-lp55xx-common.c +@@ -694,7 +694,7 @@ struct lp55xx_platform_data *lp55xx_of_p + of_property_read_u8(np, "clock-mode", &pdata->clock_mode); + + pdata->enable_gpiod = devm_gpiod_get_optional(dev, "enable", +- GPIOD_ASIS); ++ GPIOD_OUT_LOW); + if (IS_ERR(pdata->enable_gpiod)) + return ERR_CAST(pdata->enable_gpiod); + diff --git a/target/linux/generic/backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch b/target/linux/generic/backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch new file mode 100644 index 0000000000..19a4be2a9d --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch @@ -0,0 +1,44 @@ +From 9319230ac147067652b58fe849ffe0ceec098665 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:03 +0100 +Subject: [PATCH] PCI: pci-bridge-emul: Add description for class_revision + field +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The current assignment to the class_revision member + + class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16); + +can make the reader think that class is at high 16 bits of the member and +revision at low 16 bits. + +In reality, class is at high 24 bits, but the class for PCI Bridge Normal +Decode is PCI_CLASS_BRIDGE_PCI << 8. + +Change the assignment and add a comment to make this clearer. + +Link: https://lore.kernel.org/r/20211130172913.9727-2-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/pci-bridge-emul.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/pci/pci-bridge-emul.c ++++ b/drivers/pci/pci-bridge-emul.c +@@ -284,7 +284,11 @@ int pci_bridge_emul_init(struct pci_brid + { + BUILD_BUG_ON(sizeof(bridge->conf) != PCI_BRIDGE_CONF_END); + +- bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16); ++ /* ++ * class_revision: Class is high 24 bits and revision is low 8 bit of this member, ++ * while class for PCI Bridge Normal Decode has the 24-bit value: PCI_CLASS_BRIDGE_PCI << 8 ++ */ ++ bridge->conf.class_revision |= cpu_to_le32((PCI_CLASS_BRIDGE_PCI << 8) << 8); + bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE; + bridge->conf.cache_line_size = 0x10; + bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch b/target/linux/generic/backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch new file mode 100644 index 0000000000..3dd82710e6 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch @@ -0,0 +1,73 @@ +From 8ea673a8b30b4a32516b8adabb15e2a68ff02ec8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:04 +0100 +Subject: [PATCH] PCI: pci-bridge-emul: Add definitions for missing + capabilities registers +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +pci-bridge-emul driver already allocates buffer for capabilities up to the +PCI_EXP_SLTSTA2 register, but does not define bit access behavior for these +registers. Add these missing definitions. + +Link: https://lore.kernel.org/r/20211130172913.9727-3-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/pci-bridge-emul.c | 43 +++++++++++++++++++++++++++++++++++ + 1 file changed, 43 insertions(+) + +--- a/drivers/pci/pci-bridge-emul.c ++++ b/drivers/pci/pci-bridge-emul.c +@@ -270,6 +270,49 @@ struct pci_bridge_reg_behavior pcie_cap_ + .ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING, + .w1c = PCI_EXP_RTSTA_PME, + }, ++ ++ [PCI_EXP_DEVCAP2 / 4] = { ++ /* ++ * Device capabilities 2 register has reserved bits [30:27]. ++ * Also bits [26:24] are reserved for non-upstream ports. ++ */ ++ .ro = BIT(31) | GENMASK(23, 0), ++ }, ++ ++ [PCI_EXP_DEVCTL2 / 4] = { ++ /* ++ * Device control 2 register is RW. Bit 11 is reserved for ++ * non-upstream ports. ++ * ++ * Device status 2 register is reserved. ++ */ ++ .rw = GENMASK(15, 12) | GENMASK(10, 0), ++ }, ++ ++ [PCI_EXP_LNKCAP2 / 4] = { ++ /* Link capabilities 2 register has reserved bits [30:25] and 0. */ ++ .ro = BIT(31) | GENMASK(24, 1), ++ }, ++ ++ [PCI_EXP_LNKCTL2 / 4] = { ++ /* ++ * Link control 2 register is RW. ++ * ++ * Link status 2 register has bits 5, 15 W1C; ++ * bits 10, 11 reserved and others are RO. ++ */ ++ .rw = GENMASK(15, 0), ++ .w1c = (BIT(15) | BIT(5)) << 16, ++ .ro = (GENMASK(14, 12) | GENMASK(9, 6) | GENMASK(4, 0)) << 16, ++ }, ++ ++ [PCI_EXP_SLTCAP2 / 4] = { ++ /* Slot capabilities 2 register is reserved. */ ++ }, ++ ++ [PCI_EXP_SLTCTL2 / 4] = { ++ /* Both Slot control 2 and Slot status 2 registers are reserved. */ ++ }, + }; + + /* diff --git a/target/linux/generic/backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch b/target/linux/generic/backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch new file mode 100644 index 0000000000..ce38719009 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch @@ -0,0 +1,61 @@ +From 1d3e170344dff2cef8827db6c09909b78cbc11d7 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:05 +0100 +Subject: [PATCH] PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and + LNKCTL2 registers on emulated bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and +LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP. +Export them via emulated software root bridge. + +Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 15 +++++++++++---- + 1 file changed, 11 insertions(+), 4 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -881,8 +881,13 @@ advk_pci_bridge_emul_pcie_conf_read(stru + + case PCI_EXP_DEVCAP: + case PCI_EXP_DEVCTL: ++ case PCI_EXP_DEVCAP2: ++ case PCI_EXP_DEVCTL2: ++ case PCI_EXP_LNKCAP2: ++ case PCI_EXP_LNKCTL2: + *value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg); + return PCI_BRIDGE_EMUL_HANDLED; ++ + default: + return PCI_BRIDGE_EMUL_NOT_HANDLED; + } +@@ -896,10 +901,6 @@ advk_pci_bridge_emul_pcie_conf_write(str + struct advk_pcie *pcie = bridge->data; + + switch (reg) { +- case PCI_EXP_DEVCTL: +- advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); +- break; +- + case PCI_EXP_LNKCTL: + advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); + if (new & PCI_EXP_LNKCTL_RL) +@@ -921,6 +922,12 @@ advk_pci_bridge_emul_pcie_conf_write(str + advk_writel(pcie, new, PCIE_ISR0_REG); + break; + ++ case PCI_EXP_DEVCTL: ++ case PCI_EXP_DEVCTL2: ++ case PCI_EXP_LNKCTL2: ++ advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); ++ break; ++ + default: + break; + } diff --git a/target/linux/generic/backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch b/target/linux/generic/backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch new file mode 100644 index 0000000000..66c7e60202 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch @@ -0,0 +1,59 @@ +From 7d8dc1f7cd007a7ce94c5b4c20d63a8b8d6d7751 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:06 +0100 +Subject: [PATCH] PCI: aardvark: Clear all MSIs at setup +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT). + +Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs, +to ensure that we don't start receiving spurious interrupts. + +Use this new mask in advk_pcie_handle_msi(); + +Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -114,6 +114,7 @@ + #define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54) + #define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58) + #define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C) ++#define PCIE_MSI_ALL_MASK GENMASK(31, 0) + #define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C) + #define PCIE_MSI_DATA_MASK GENMASK(15, 0) + +@@ -577,6 +578,7 @@ static void advk_pcie_setup_hw(struct ad + advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); + + /* Clear all interrupts */ ++ advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG); + advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG); + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG); + advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG); +@@ -589,7 +591,7 @@ static void advk_pcie_setup_hw(struct ad + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG); + + /* Unmask all MSIs */ +- advk_writel(pcie, 0, PCIE_MSI_MASK_REG); ++ advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG); + + /* Enable summary interrupt for GIC SPI source */ + reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK); +@@ -1399,7 +1401,7 @@ static void advk_pcie_handle_msi(struct + + msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG); + msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG); +- msi_status = msi_val & ~msi_mask; ++ msi_status = msi_val & ((~msi_mask) & PCIE_MSI_ALL_MASK); + + for (msi_idx = 0; msi_idx < MSI_IRQ_NUM; msi_idx++) { + if (!(BIT(msi_idx) & msi_status)) diff --git a/target/linux/generic/backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch b/target/linux/generic/backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch new file mode 100644 index 0000000000..8870e47b40 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch @@ -0,0 +1,34 @@ +From a4ca7948e1d47275f8f3e5023243440c40561916 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:07 +0100 +Subject: [PATCH] PCI: aardvark: Comment actions in driver remove method +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add two more comments into the advk_pcie_remove() method. + +Link: https://lore.kernel.org/r/20211130172913.9727-6-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1698,11 +1698,13 @@ static int advk_pcie_remove(struct platf + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); + int i; + ++ /* Remove PCI bus with all devices */ + pci_lock_rescan_remove(); + pci_stop_root_bus(bridge->bus); + pci_remove_root_bus(bridge->bus); + pci_unlock_rescan_remove(); + ++ /* Remove IRQ domains */ + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + diff --git a/target/linux/generic/backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch b/target/linux/generic/backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch new file mode 100644 index 0000000000..f1c3f3bb13 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch @@ -0,0 +1,41 @@ +From a46f2f6dd4093438d9615dfbf5c0fea2a9835dba Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:08 +0100 +Subject: [PATCH] PCI: aardvark: Disable bus mastering when unbinding driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Ensure that after driver unbind PCIe cards are not able to forward +memory and I/O requests in the upstream direction. + +Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1696,6 +1696,7 @@ static int advk_pcie_remove(struct platf + { + struct advk_pcie *pcie = platform_get_drvdata(pdev); + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); ++ u32 val; + int i; + + /* Remove PCI bus with all devices */ +@@ -1704,6 +1705,11 @@ static int advk_pcie_remove(struct platf + pci_remove_root_bus(bridge->bus); + pci_unlock_rescan_remove(); + ++ /* Disable Root Bridge I/O space, memory space and bus mastering */ ++ val = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); ++ val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); ++ advk_writel(pcie, val, PCIE_CORE_CMD_STATUS_REG); ++ + /* Remove IRQ domains */ + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch b/target/linux/generic/backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch new file mode 100644 index 0000000000..7add045cab --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch @@ -0,0 +1,48 @@ +From 13bcdf07cb2ecff5d45d2c141df2539b15211448 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:09 +0100 +Subject: [PATCH] PCI: aardvark: Mask all interrupts when unbinding driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Ensure that no interrupt can be triggered after driver unbind. + +Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 21 +++++++++++++++++++++ + 1 file changed, 21 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1710,6 +1710,27 @@ static int advk_pcie_remove(struct platf + val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + advk_writel(pcie, val, PCIE_CORE_CMD_STATUS_REG); + ++ /* Disable MSI */ ++ val = advk_readl(pcie, PCIE_CORE_CTRL2_REG); ++ val &= ~PCIE_CORE_CTRL2_MSI_ENABLE; ++ advk_writel(pcie, val, PCIE_CORE_CTRL2_REG); ++ ++ /* Clear MSI address */ ++ advk_writel(pcie, 0, PCIE_MSI_ADDR_LOW_REG); ++ advk_writel(pcie, 0, PCIE_MSI_ADDR_HIGH_REG); ++ ++ /* Mask all interrupts */ ++ advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG); ++ advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG); ++ advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG); ++ advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_MASK_REG); ++ ++ /* Clear all interrupts */ ++ advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG); ++ advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG); ++ advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG); ++ advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG); ++ + /* Remove IRQ domains */ + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch b/target/linux/generic/backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch new file mode 100644 index 0000000000..f86d2bd61f --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch @@ -0,0 +1,33 @@ +From 2f040a17f5061457ae95035326d3159eddc1e5cc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:10 +0100 +Subject: [PATCH] PCI: aardvark: Fix memory leak in driver unbind +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Free config space for emulated root bridge when unbinding driver to fix +memory leak. Do it after disabling and masking all interrupts, since +aardvark interrupt handler accesses config space of emulated root +bridge. + +Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1735,6 +1735,9 @@ static int advk_pcie_remove(struct platf + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + ++ /* Free config space for emulated root bridge */ ++ pci_bridge_emul_cleanup(&pcie->bridge); ++ + /* Disable outbound address windows mapping */ + for (i = 0; i < OB_WIN_COUNT; i++) + advk_pcie_disable_ob_win(pcie, i); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch b/target/linux/generic/backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch new file mode 100644 index 0000000000..1e9e74136c --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch @@ -0,0 +1,33 @@ +From 1f54391be8ce0c981d312cb93acdc5608def576a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:11 +0100 +Subject: [PATCH] PCI: aardvark: Assert PERST# when unbinding driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Put the PCIe card into reset by asserting PERST# signal when unbinding +driver. It doesn't make sense to leave the card working if it can't +communicate with the host. This should also save some power. + +Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1738,6 +1738,10 @@ static int advk_pcie_remove(struct platf + /* Free config space for emulated root bridge */ + pci_bridge_emul_cleanup(&pcie->bridge); + ++ /* Assert PERST# signal which prepares PCIe card for power down */ ++ if (pcie->reset_gpio) ++ gpiod_set_value_cansleep(pcie->reset_gpio, 1); ++ + /* Disable outbound address windows mapping */ + for (i = 0; i < OB_WIN_COUNT; i++) + advk_pcie_disable_ob_win(pcie, i); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch b/target/linux/generic/backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch new file mode 100644 index 0000000000..3b531deae0 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch @@ -0,0 +1,34 @@ +From 759dec2e3dfdbd261c41d2279f04f2351c971a49 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:12 +0100 +Subject: [PATCH] PCI: aardvark: Disable link training when unbinding driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Disable link training circuit in driver unbind sequence. We want to +leave link training in the same state as it was before the driver was +probed. + +Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1742,6 +1742,11 @@ static int advk_pcie_remove(struct platf + if (pcie->reset_gpio) + gpiod_set_value_cansleep(pcie->reset_gpio, 1); + ++ /* Disable link training */ ++ val = advk_readl(pcie, PCIE_CORE_CTRL0_REG); ++ val &= ~LINK_TRAINING_EN; ++ advk_writel(pcie, val, PCIE_CORE_CTRL0_REG); ++ + /* Disable outbound address windows mapping */ + for (i = 0; i < OB_WIN_COUNT; i++) + advk_pcie_disable_ob_win(pcie, i); diff --git a/target/linux/generic/backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch b/target/linux/generic/backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch new file mode 100644 index 0000000000..6caa6eb362 --- /dev/null +++ b/target/linux/generic/backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch @@ -0,0 +1,30 @@ +From fdbbe242c15a8f2cd0e3ad8a56cd0a447b771d0d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Tue, 30 Nov 2021 18:29:13 +0100 +Subject: [PATCH] PCI: aardvark: Disable common PHY when unbinding driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Disable the PCIe PHY when unbinding driver. This should save some power. + +Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Lorenzo Pieralisi +--- + drivers/pci/controller/pci-aardvark.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1751,6 +1751,9 @@ static int advk_pcie_remove(struct platf + for (i = 0; i < OB_WIN_COUNT; i++) + advk_pcie_disable_ob_win(pcie, i); + ++ /* Disable phy */ ++ advk_pcie_disable_phy(pcie); ++ + return 0; + } + diff --git a/target/linux/generic/backport-5.15/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch b/target/linux/generic/backport-5.15/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch new file mode 100644 index 0000000000..4f867724ac --- /dev/null +++ b/target/linux/generic/backport-5.15/851-v5.15-0001-phy-marvell-phy-mvebu-a3700-comphy-Rename-HS-SGMMI-t.patch @@ -0,0 +1,67 @@ +From 40da06da15c1718b02072687bbfb2d08f5eb9399 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 27 Aug 2021 11:27:52 +0200 +Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Rename HS-SGMMI to + 2500Base-X +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather +2500Base-X mode which runs at 3.125 Gbps speed. + +Rename macro names and comments to 2500Base-X. + +Signed-off-by: Pali Rohár +Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support") +Signed-off-by: David S. Miller +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -29,7 +29,7 @@ + + #define COMPHY_FW_MODE_SATA 0x1 + #define COMPHY_FW_MODE_SGMII 0x2 +-#define COMPHY_FW_MODE_HS_SGMII 0x3 ++#define COMPHY_FW_MODE_2500BASEX 0x3 + #define COMPHY_FW_MODE_USB3H 0x4 + #define COMPHY_FW_MODE_USB3D 0x5 + #define COMPHY_FW_MODE_PCIE 0x6 +@@ -40,7 +40,7 @@ + + #define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ + #define COMPHY_FW_SPEED_2_5G 1 +-#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */ ++#define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ + #define COMPHY_FW_SPEED_5G 3 + #define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */ + #define COMPHY_FW_SPEED_6G 5 +@@ -84,14 +84,14 @@ static const struct mvebu_a3700_comphy_c + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, + COMPHY_FW_MODE_SGMII), + MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, +- COMPHY_FW_MODE_HS_SGMII), ++ COMPHY_FW_MODE_2500BASEX), + /* lane 1 */ + MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, + COMPHY_FW_MODE_PCIE), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, + COMPHY_FW_MODE_SGMII), + MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, +- COMPHY_FW_MODE_HS_SGMII), ++ COMPHY_FW_MODE_2500BASEX), + /* lane 2 */ + MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, + COMPHY_FW_MODE_SATA), +@@ -205,7 +205,7 @@ static int mvebu_a3700_comphy_power_on(s + COMPHY_FW_SPEED_1_25G); + break; + case PHY_INTERFACE_MODE_2500BASEX: +- dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n", ++ dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", + lane->id); + fw_param = COMPHY_FW_NET(fw_mode, lane->port, + COMPHY_FW_SPEED_3_125G); diff --git a/target/linux/generic/backport-5.15/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch b/target/linux/generic/backport-5.15/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch new file mode 100644 index 0000000000..99f56f1c57 --- /dev/null +++ b/target/linux/generic/backport-5.15/851-v5.15-0002-phy-marvell-phy-mvebu-a3700-comphy-Remove-unsupporte.patch @@ -0,0 +1,40 @@ +From e1dbe9ecf621b6f71f3d2df3e50731d583f3d27f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 27 Aug 2021 11:27:53 +0200 +Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported + modes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused +macros for these unsupported modes. + +Signed-off-by: Pali Rohár +Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support") +Signed-off-by: David S. Miller +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 6 ------ + 1 file changed, 6 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -33,18 +33,12 @@ + #define COMPHY_FW_MODE_USB3H 0x4 + #define COMPHY_FW_MODE_USB3D 0x5 + #define COMPHY_FW_MODE_PCIE 0x6 +-#define COMPHY_FW_MODE_RXAUI 0x7 +-#define COMPHY_FW_MODE_XFI 0x8 +-#define COMPHY_FW_MODE_SFI 0x9 + #define COMPHY_FW_MODE_USB3 0xa + + #define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ + #define COMPHY_FW_SPEED_2_5G 1 + #define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ + #define COMPHY_FW_SPEED_5G 3 +-#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */ +-#define COMPHY_FW_SPEED_6G 5 +-#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */ + #define COMPHY_FW_SPEED_MAX 0x3F + + #define COMPHY_FW_MODE(mode) ((mode) << 12) diff --git a/target/linux/generic/backport-5.15/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch b/target/linux/generic/backport-5.15/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch new file mode 100644 index 0000000000..971562a8f7 --- /dev/null +++ b/target/linux/generic/backport-5.15/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch @@ -0,0 +1,49 @@ +From d3115128bdafb62628ab41861a4f06f6d02ac320 Mon Sep 17 00:00:00 2001 +From: Lech Perczak +Date: Mon, 10 Jan 2022 23:48:44 +0100 +Subject: MIPS: ath79: drop _machine_restart again + +Commit 81424d0ad0d4 ("MIPS: ath79: Use the reset controller to restart +OF machines") removed setup of _machine_restart on OF machines to use +reset handler in reset controller driver. +While removing remnants of non-OF machines in commit 3a77e0d75eed +("MIPS: ath79: drop machfiles"), this was introduced again, making it +impossible to use additional restart handlers registered through device +tree. Drop setting _machine_restart altogether, and ath79_restart +function, which is no longer used after this. + +Fixes: 3a77e0d75eed ("MIPS: ath79: drop machfiles") +Cc: John Crispin +Cc: Florian Fainelli +Signed-off-by: Lech Perczak +Signed-off-by: Thomas Bogendoerfer +--- + arch/mips/ath79/setup.c | 10 ---------- + 1 file changed, 10 deletions(-) + +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -34,15 +34,6 @@ + + static char ath79_sys_type[ATH79_SYS_TYPE_LEN]; + +-static void ath79_restart(char *command) +-{ +- local_irq_disable(); +- ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); +- for (;;) +- if (cpu_wait) +- cpu_wait(); +-} +- + static void ath79_halt(void) + { + while (1) +@@ -233,7 +224,6 @@ void __init plat_mem_setup(void) + + detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); + +- _machine_restart = ath79_restart; + _machine_halt = ath79_halt; + pm_power_off = ath79_halt; + } diff --git a/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch b/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch new file mode 100644 index 0000000000..fabf177628 --- /dev/null +++ b/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch @@ -0,0 +1,71 @@ +From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Fri, 18 Feb 2022 10:06:43 +0100 +Subject: hwmon: (lm70) Add ti,tmp125 support + +The TMP125 is a 2 degree Celsius accurate Digital +Temperature Sensor with a SPI interface. + +The temperature register is a 16-bit, read-only register. +The MSB (Bit 15) is a leading zero and never set. Bits 14 +to 5 are the 1+9 temperature data bits in a two's +complement format. Bits 4 to 0 are useless copies of +Bit 5 value and therefore ignored. + +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com +Signed-off-by: Guenter Roeck +--- +--- a/drivers/hwmon/lm70.c ++++ b/drivers/hwmon/lm70.c +@@ -34,6 +34,7 @@ + #define LM70_CHIP_LM71 2 /* NS LM71 */ + #define LM70_CHIP_LM74 3 /* NS LM74 */ + #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */ ++#define LM70_CHIP_TMP125 5 /* TI TMP125 */ + + struct lm70 { + struct spi_device *spi; +@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d + * LM71: + * 14 bits of 2's complement data, discard LSB 2 bits, + * resolution 0.0312 degrees celsius. ++ * ++ * TMP125: ++ * MSB/D15 is a leading zero. D14 is the sign-bit. This is ++ * followed by 9 temperature bits (D13..D5) in 2's complement ++ * data format with a resolution of 0.25 degrees celsius per unit. ++ * LSB 5 bits (D4..D0) share the same value as D5 and get discarded. + */ + switch (p_lm70->chip) { + case LM70_CHIP_LM70: +@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d + case LM70_CHIP_LM71: + val = ((int)raw / 4) * 3125 / 100; + break; ++ ++ case LM70_CHIP_TMP125: ++ val = (sign_extend32(raw, 14) / 32) * 250; ++ break; + } + + status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ +@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of + .data = (void *) LM70_CHIP_TMP122, + }, + { ++ .compatible = "ti,tmp125", ++ .data = (void *) LM70_CHIP_TMP125, ++ }, ++ { + .compatible = "ti,lm71", + .data = (void *) LM70_CHIP_LM71, + }, +@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i + { "lm70", LM70_CHIP_LM70 }, + { "tmp121", LM70_CHIP_TMP121 }, + { "tmp122", LM70_CHIP_TMP122 }, ++ { "tmp125", LM70_CHIP_TMP125 }, + { "lm71", LM70_CHIP_LM71 }, + { "lm74", LM70_CHIP_LM74 }, + { }, diff --git a/target/linux/generic/config-5.15 b/target/linux/generic/config-5.15 new file mode 100644 index 0000000000..578b8be764 --- /dev/null +++ b/target/linux/generic/config-5.15 @@ -0,0 +1,7179 @@ +# CONFIG_104_QUAD_8 is not set +CONFIG_32BIT=y +CONFIG_64BIT_TIME=y +# CONFIG_6LOWPAN is not set +# CONFIG_6LOWPAN_DEBUGFS is not set +# CONFIG_6PACK is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_9P_FS is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_AB8500_CORE is not set +# CONFIG_ABP060MG is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_ACENIC is not set +# CONFIG_ACERHDF is not set +# CONFIG_ACER_WIRELESS is not set +# CONFIG_ACORN_PARTITION is not set +# CONFIG_ACPI_ALS is not set +# CONFIG_ACPI_APEI is not set +# CONFIG_ACPI_BUTTON is not set +# CONFIG_ACPI_CONFIGFS is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +# CONFIG_ACPI_EXTLOG is not set +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_NFIT is not set +# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set +# CONFIG_ACPI_TABLE_UPGRADE is not set +# CONFIG_ACPI_VIDEO is not set +# CONFIG_AD2S1200 is not set +# CONFIG_AD2S1210 is not set +# CONFIG_AD2S90 is not set +# CONFIG_AD5064 is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_AD5272 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5770R is not set +# CONFIG_AD5791 is not set +# CONFIG_AD5933 is not set +# CONFIG_AD7091R5 is not set +# CONFIG_AD7124 is not set +# CONFIG_AD7150 is not set +# CONFIG_AD7152 is not set +# CONFIG_AD7192 is not set +# CONFIG_AD7266 is not set +# CONFIG_AD7280 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7292 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7606 is not set +# CONFIG_AD7606_IFACE_PARALLEL is not set +# CONFIG_AD7606_IFACE_SPI is not set +# CONFIG_AD7746 is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7768_1 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7816 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD7949 is not set +# CONFIG_AD799X is not set +# CONFIG_AD8366 is not set +# CONFIG_AD8801 is not set +# CONFIG_AD9467 is not set +# CONFIG_AD9523 is not set +# CONFIG_AD9832 is not set +# CONFIG_AD9834 is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_ADE7854 is not set +# CONFIG_ADF4350 is not set +# CONFIG_ADF4371 is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADIN_PHY is not set +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16203 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADIS16240 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set +# CONFIG_ADIS16475 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_ADI_AXI_ADC is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_ADM6996_PHY is not set +# CONFIG_ADM8211 is not set +# CONFIG_ADT7316 is not set +# CONFIG_ADUX1020 is not set +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_ADXL372_I2C is not set +# CONFIG_ADXL372_SPI is not set +# CONFIG_ADXRS290 is not set +# CONFIG_ADXRS450 is not set +CONFIG_AEABI=y +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_AFFS_FS is not set +# CONFIG_AFS_DEBUG_CURSOR is not set +# CONFIG_AFS_FS is not set +# CONFIG_AF_KCM is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_RXRPC_INJECT_LOSS is not set +# CONFIG_AF_RXRPC_IPV6 is not set +# CONFIG_AGP is not set +# CONFIG_AHCI_CEVA is not set +# CONFIG_AHCI_IMX is not set +# CONFIG_AHCI_MVEBU is not set +# CONFIG_AHCI_QORIQ is not set +# CONFIG_AHCI_XGENE is not set +CONFIG_AIO=y +# CONFIG_AIRO is not set +# CONFIG_AIRO_CS is not set +# CONFIG_AIX_PARTITION is not set +# CONFIG_AK09911 is not set +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AL3010 is not set +# CONFIG_AL3320A is not set +# CONFIG_ALIM7101_WDT is not set +CONFIG_ALLOW_DEV_COREDUMP=y +# CONFIG_ALTERA_MBOX is not set +# CONFIG_ALTERA_MSGDMA is not set +# CONFIG_ALTERA_STAPL is not set +# CONFIG_ALTERA_TSE is not set +# CONFIG_ALX is not set +# CONFIG_AL_FIC is not set +# CONFIG_AM2315 is not set +# CONFIG_AM335X_PHY_USB is not set +# CONFIG_AMBA_PL08X is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_AMD_MEM_ENCRYPT is not set +# CONFIG_AMD_PHY is not set +# CONFIG_AMD_XGBE is not set +# CONFIG_AMD_XGBE_HAVE_ECC is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_AMILO_RFKILL is not set +# CONFIG_ANDROID is not set +CONFIG_ANON_INODES=y +# CONFIG_APDS9300 is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_APDS9960 is not set +# CONFIG_APM8018X is not set +# CONFIG_APM_EMULATION is not set +# CONFIG_APPLE_GMUX is not set +# CONFIG_APPLE_MFI_FASTCHARGE is not set +# CONFIG_APPLE_PROPERTIES is not set +# CONFIG_APPLICOM is not set +# CONFIG_AQTION is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AR5523 is not set +# CONFIG_AR7 is not set +# CONFIG_AR8216_PHY is not set +# CONFIG_AR8216_PHY_LEDS is not set +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_AGILEX is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_ARTPEC is not set +# CONFIG_ARCH_ASPEED is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AXXIA is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM_21664 is not set +# CONFIG_ARCH_BCM_23550 is not set +# CONFIG_ARCH_BCM_281XX is not set +# CONFIG_ARCH_BCM_5301X is not set +# CONFIG_ARCH_BCM_53573 is not set +# CONFIG_ARCH_BCM_63XX is not set +# CONFIG_ARCH_BCM_CYGNUS is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BCM_NSP is not set +# CONFIG_ARCH_BERLIN is not set +CONFIG_ARCH_BINFMT_ELF_STATE=y +# CONFIG_ARCH_BITMAIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_DIGICOLOR is not set +# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_EXYNOS is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_HI3xxx is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_KEEMBAY is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MILBEAUT is not set +CONFIG_ARCH_MMAP_RND_BITS=8 +CONFIG_ARCH_MMAP_RND_BITS_MAX=16 +CONFIG_ARCH_MMAP_RND_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSTARV7 is not set +# CONFIG_ARCH_MULTIPLATFORM is not set +# CONFIG_ARCH_MULTI_V6 is not set +# CONFIG_ARCH_MULTI_V7 is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_NPCM is not set +# CONFIG_ARCH_NSPIRE is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP2PLUS is not set +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_OXNAS is not set +# CONFIG_ARCH_PICOXCELL is not set +# CONFIG_ARCH_PRIMA2 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RANDOM is not set +# CONFIG_ARCH_RDA is not set +# CONFIG_ARCH_REALTEK is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_S32 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_ARCH_SPARX5 is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_STM32 is not set +# CONFIG_ARCH_STRATIX10 is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TANGO is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_VISCONTI is not set +# CONFIG_ARCH_VT8500 is not set +# CONFIG_ARCH_VULCAN is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_WANTS_THP_SWAP is not set +# CONFIG_ARCH_WM8505 is not set +# CONFIG_ARCH_WM8750 is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZX is not set +# CONFIG_ARCH_ZYNQ is not set +# CONFIG_ARCH_ZYNQMP is not set +# CONFIG_ARCNET is not set +# CONFIG_ARC_EMAC is not set +# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_AMU_EXTN is not set +# CONFIG_ARM64_BTI is not set +# CONFIG_ARM64_CRYPTO is not set +# CONFIG_ARM64_E0PD is not set +# CONFIG_ARM64_ERRATUM_1024718 is not set +# CONFIG_ARM64_ERRATUM_1165522 is not set +# CONFIG_ARM64_ERRATUM_1286807 is not set +# CONFIG_ARM64_ERRATUM_1319367 is not set +# CONFIG_ARM64_ERRATUM_1418040 is not set +# CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1508412 is not set +# CONFIG_ARM64_ERRATUM_1530923 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set +# CONFIG_ARM64_ERRATUM_819472 is not set +# CONFIG_ARM64_ERRATUM_824069 is not set +# CONFIG_ARM64_ERRATUM_826319 is not set +# CONFIG_ARM64_ERRATUM_827319 is not set +# CONFIG_ARM64_ERRATUM_832075 is not set +# CONFIG_ARM64_ERRATUM_834220 is not set +# CONFIG_ARM64_ERRATUM_843419 is not set +# CONFIG_ARM64_ERRATUM_845719 is not set +# CONFIG_ARM64_ERRATUM_858921 is not set +# CONFIG_ARM64_HW_AFDBM is not set +# CONFIG_ARM64_LSE_ATOMICS is not set +# CONFIG_ARM64_MODULE_PLTS is not set +# CONFIG_ARM64_MTE is not set +# CONFIG_ARM64_PAN is not set +# CONFIG_ARM64_PMEM is not set +# CONFIG_ARM64_PSEUDO_NMI is not set +# CONFIG_ARM64_PTDUMP_DEBUGFS is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +# CONFIG_ARM64_RAS_EXTN is not set +# CONFIG_ARM64_RELOC_TEST is not set +CONFIG_ARM64_SW_TTBR0_PAN=y +# CONFIG_ARM64_TLB_RANGE is not set +# CONFIG_ARM64_UAO is not set +# CONFIG_ARM64_USE_LSE_ATOMICS is not set +# CONFIG_ARM64_VA_BITS_48 is not set +# CONFIG_ARM64_VHE is not set +# CONFIG_ARM_APPENDED_DTB is not set +# CONFIG_ARM_ARCH_TIMER is not set +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set +# CONFIG_ARM_CCI is not set +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCI_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_ARM_CMN is not set +# CONFIG_ARM_CPUIDLE is not set +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_ARM_CRYPTO is not set +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +# CONFIG_ARM_DSU_PMU is not set +# CONFIG_ARM_ERRATA_326103 is not set +# CONFIG_ARM_ERRATA_364296 is not set +# CONFIG_ARM_ERRATA_411920 is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +# CONFIG_ARM_ERRATA_643719 is not set +# CONFIG_ARM_ERRATA_720789 is not set +# CONFIG_ARM_ERRATA_742230 is not set +# CONFIG_ARM_ERRATA_742231 is not set +# CONFIG_ARM_ERRATA_743622 is not set +# CONFIG_ARM_ERRATA_751472 is not set +# CONFIG_ARM_ERRATA_754322 is not set +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_764369 is not set +# CONFIG_ARM_ERRATA_773022 is not set +# CONFIG_ARM_ERRATA_775420 is not set +# CONFIG_ARM_ERRATA_798181 is not set +# CONFIG_ARM_ERRATA_814220 is not set +# CONFIG_ARM_ERRATA_818325_852422 is not set +# CONFIG_ARM_ERRATA_821420 is not set +# CONFIG_ARM_ERRATA_825619 is not set +# CONFIG_ARM_ERRATA_852421 is not set +# CONFIG_ARM_ERRATA_852423 is not set +# CONFIG_ARM_ERRATA_857271 is not set +# CONFIG_ARM_ERRATA_857272 is not set +CONFIG_ARM_GIC_MAX_NR=1 +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_KPROBES_TEST is not set +# CONFIG_ARM_LPAE is not set +# CONFIG_ARM_MHU is not set +# CONFIG_ARM_MODULE_PLTS is not set +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +# CONFIG_ARM_PSCI is not set +# CONFIG_ARM_PSCI_CHECKER is not set +# CONFIG_ARM_PSCI_CPUIDLE is not set +# CONFIG_ARM_PTDUMP_DEBUGFS is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_ARM_SCMI_PROTOCOL is not set +# CONFIG_ARM_SCPI_PROTOCOL is not set +# CONFIG_ARM_SDE_INTERFACE is not set +# CONFIG_ARM_SMCCC_SOC_ID is not set +# CONFIG_ARM_SMC_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SPE_PMU is not set +# CONFIG_ARM_THUMBEE is not set +# CONFIG_ARM_TIMER_SP804 is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_ARM_VIRT_EXT is not set +# CONFIG_AS3935 is not set +# CONFIG_AS73211 is not set +# CONFIG_ASM9260_TIMER is not set +# CONFIG_ASN1 is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_ASUS_WIRELESS is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_AT91_SAMA5D2_ADC is not set +# CONFIG_ATA is not set +# CONFIG_ATAGS is not set +CONFIG_ATAGS_PROC=y +# CONFIG_ATALK is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_ATA_ACPI is not set +CONFIG_ATA_BMDMA=y +# CONFIG_ATA_FORCE is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_ATA_LEDS is not set +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_ATA_PIIX is not set +CONFIG_ATA_SFF=y +# CONFIG_ATA_VERBOSE_ERROR is not set +# CONFIG_ATH10K is not set +# CONFIG_ATH25 is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH6KL is not set +# CONFIG_ATH79 is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1C is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL2 is not set +# CONFIG_ATLAS_EZO_SENSOR is not set +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +# CONFIG_ATMEL_PIT is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_BR2684 is not set +CONFIG_ATM_BR2684_IPFILTER=y +# CONFIG_ATM_CLIP is not set +CONFIG_ATM_CLIP_NO_ICMP=y +# CONFIG_ATM_DRIVERS is not set +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_FORE200E is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_LANE is not set +# CONFIG_ATM_MPOA is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_SOLOS is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ATP is not set +# CONFIG_AUDIT is not set +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_AURORA_NB8800 is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTO_ZRELADDR is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_AX25 is not set +# CONFIG_AX25_DAMA_SLAVE is not set +# CONFIG_AX88796 is not set +# CONFIG_AX88796B_PHY is not set +# CONFIG_AXP20X_ADC is not set +# CONFIG_AXP20X_POWER is not set +# CONFIG_AXP288_ADC is not set +# CONFIG_AXP288_FUEL_GAUGE is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_B44 is not set +# CONFIG_B53 is not set +# CONFIG_B53_MDIO_DRIVER is not set +# CONFIG_B53_MMAP_DRIVER is not set +# CONFIG_B53_SERDES is not set +# CONFIG_B53_SPI_DRIVER is not set +# CONFIG_B53_SRAB_DRIVER is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_APPLE is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_KTD253 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_BACKLIGHT_LED is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_PANDORA is not set +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_QCOM_WLED is not set +# CONFIG_BACKLIGHT_RPI is not set +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_BAREUDP is not set +CONFIG_BASE_FULL=y +CONFIG_BASE_SMALL=0 +# CONFIG_BATMAN_ADV is not set +# CONFIG_BATTERY_BQ27XXX is not set +# CONFIG_BATTERY_BQ27XXX_HDQ is not set +# CONFIG_BATTERY_CW2015 is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_BATTERY_GOLDFISH is not set +# CONFIG_BATTERY_LEGO_EV3 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_BATTERY_MAX1721X is not set +# CONFIG_BATTERY_RT5033 is not set +# CONFIG_BATTERY_SBS is not set +# CONFIG_BAYCOM_EPP is not set +# CONFIG_BAYCOM_PAR is not set +# CONFIG_BAYCOM_SER_FDX is not set +# CONFIG_BAYCOM_SER_HDX is not set +# CONFIG_BCACHE is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM54140_PHY is not set +# CONFIG_BCM63XX is not set +# CONFIG_BCM63XX_PHY is not set +# CONFIG_BCM7038_WDT is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM84881_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BCMA is not set +# CONFIG_BCMA_DRIVER_GPIO is not set +CONFIG_BCMA_POSSIBLE=y +# CONFIG_BCMGENET is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_BCM_SBA_RAID is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BE2NET is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_BGMAC is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_BIG_LITTLE is not set +# CONFIG_BINARY_PRINTF is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_ELF_FDPIC is not set +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_SCRIPT=y +CONFIG_BITREVERSE=y +# CONFIG_BLK_CGROUP_IOCOST is not set +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +# CONFIG_BLK_DEBUG_FS is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_CS5536 is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDE_AU1XXX is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_PMEM is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set +# CONFIG_BLK_DEV_RZ1000 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_SD is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_UMC8672 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_ZONED is not set +# CONFIG_BLK_INLINE_ENCRYPTION is not set +# CONFIG_BLK_SED_OPAL is not set +# CONFIG_BLK_WBT is not set +CONFIG_BLOCK=y +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMA400 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_BMC150_MAGN is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_BME680 is not set +# CONFIG_BMG160 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_BMIPS_GENERIC is not set +# CONFIG_BMP280 is not set +# CONFIG_BNA is not set +# CONFIG_BNX2 is not set +# CONFIG_BNX2X is not set +# CONFIG_BNX2X_SRIOV is not set +# CONFIG_BNXT is not set +# CONFIG_BONDING is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +# CONFIG_BOOTTIME_TRACING is not set +# CONFIG_BOOT_CONFIG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_BOOT_RAW=y +# CONFIG_BOUNCE is not set +CONFIG_BPF=y +# CONFIG_BPFILTER is not set +CONFIG_BPF_JIT=y +# CONFIG_BPF_JIT_ALWAYS_ON is not set +CONFIG_BPF_JIT_DEFAULT_ON=y +# CONFIG_BPF_PRELOAD is not set +# CONFIG_BPF_STREAM_PARSER is not set +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_UNPRIV_DEFAULT_OFF=y +# CONFIG_BPQETHER is not set +CONFIG_BQL=y +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_BRCMFMAC is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_BRIDGE=y +# CONFIG_BRIDGE_EBT_802_3 is not set +# CONFIG_BRIDGE_EBT_AMONG is not set +# CONFIG_BRIDGE_EBT_ARP is not set +# CONFIG_BRIDGE_EBT_ARPREPLY is not set +# CONFIG_BRIDGE_EBT_BROUTE is not set +# CONFIG_BRIDGE_EBT_DNAT is not set +# CONFIG_BRIDGE_EBT_IP is not set +# CONFIG_BRIDGE_EBT_IP6 is not set +# CONFIG_BRIDGE_EBT_LIMIT is not set +# CONFIG_BRIDGE_EBT_LOG is not set +# CONFIG_BRIDGE_EBT_MARK is not set +# CONFIG_BRIDGE_EBT_MARK_T is not set +# CONFIG_BRIDGE_EBT_NFLOG is not set +# CONFIG_BRIDGE_EBT_PKTTYPE is not set +# CONFIG_BRIDGE_EBT_REDIRECT is not set +# CONFIG_BRIDGE_EBT_SNAT is not set +# CONFIG_BRIDGE_EBT_STP is not set +# CONFIG_BRIDGE_EBT_T_FILTER is not set +# CONFIG_BRIDGE_EBT_T_NAT is not set +# CONFIG_BRIDGE_EBT_VLAN is not set +CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_BRIDGE_MRP is not set +# CONFIG_BRIDGE_NETFILTER is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_BRIDGE_VLAN_FILTERING=y +# CONFIG_BROADCOM_PHY is not set +CONFIG_BROKEN_ON_SMP=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_BT is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_BTRFS_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS_REF_VERIFY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BT_ATH3K is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_BREDR is not set +# CONFIG_BT_CMTP is not set +# CONFIG_BT_FEATURE_DEBUG is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set +# CONFIG_BT_HCIBTUSB_MTK is not set +# CONFIG_BT_HCIBTUSB_RTL is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_RTL is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_HIDP is not set +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +# CONFIG_BT_LEDS is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_MSFTEXT is not set +# CONFIG_BT_MTKSDIO is not set +# CONFIG_BT_MTKUART is not set +# CONFIG_BT_RFCOMM is not set +CONFIG_BT_RFCOMM_TTY=y +# CONFIG_BT_SELFTEST is not set +CONFIG_BUG=y +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_BUILDTIME_TABLE_SORT=y +# CONFIG_BUILD_BIN2C is not set +CONFIG_BUILD_SALT="" +# CONFIG_C2PORT is not set +CONFIG_CACHE_L2X0_PMU=y +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_CAIF is not set +# CONFIG_CAN is not set +# CONFIG_CAN_BCM is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_CAN_DEV is not set +# CONFIG_CAN_GS_USB is not set +# CONFIG_CAN_GW is not set +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_ISOTP is not set +# CONFIG_CAN_J1939 is not set +# CONFIG_CAN_KVASER_PCIEFD is not set +# CONFIG_CAN_MCBA_USB is not set +# CONFIG_CAN_MCP251XFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_PEAK_PCIEFD is not set +# CONFIG_CAN_RAW is not set +# CONFIG_CAN_RCAR is not set +# CONFIG_CAN_RCAR_CANFD is not set +# CONFIG_CAN_SLCAN is not set +# CONFIG_CAN_SUN4I is not set +# CONFIG_CAN_UCAN is not set +# CONFIG_CAN_VCAN is not set +# CONFIG_CAN_VXCAN is not set +# CONFIG_CAPI_AVM is not set +# CONFIG_CAPI_EICON is not set +# CONFIG_CAPI_TRACE is not set +CONFIG_CARDBUS=y +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_CARL9170 is not set +# CONFIG_CASSINI is not set +# CONFIG_CAVIUM_CPT is not set +# CONFIG_CAVIUM_ERRATUM_22375 is not set +# CONFIG_CAVIUM_ERRATUM_23144 is not set +# CONFIG_CAVIUM_ERRATUM_23154 is not set +# CONFIG_CAVIUM_ERRATUM_27456 is not set +# CONFIG_CAVIUM_ERRATUM_30115 is not set +# CONFIG_CAVIUM_OCTEON_SOC is not set +# CONFIG_CAVIUM_PTP is not set +# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set +# CONFIG_CB710_CORE is not set +# CONFIG_CC10001_ADC is not set +# CONFIG_CCS811 is not set +CONFIG_CC_CAN_LINK=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_CFG80211 is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +# CONFIG_CGROUPS is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_CHARGER_BD99954 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ2515X is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_BQ25980 is not set +# CONFIG_CHARGER_DETECTOR_MAX14656 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_LT3651 is not set +# CONFIG_CHARGER_LTC3651 is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_RT9455 is not set +# CONFIG_CHARGER_SBS is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_CHARGER_TWL4030 is not set +# CONFIG_CHARGER_UCS1002 is not set +# CONFIG_CHASH_SELFTEST is not set +# CONFIG_CHASH_STATS is not set +# CONFIG_CHECKPOINT_RESTORE is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +# CONFIG_CHROME_PLATFORMS is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CIFS is not set +# CONFIG_CIFS_ACL is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y +# CONFIG_CIFS_DEBUG is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_FSCACHE is not set +# CONFIG_CIFS_NFSD_EXPORT is not set +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_SMB2 is not set +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_STATS2 is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +# CONFIG_CIO_DAC is not set +# CONFIG_CLEANCACHE is not set +# CONFIG_CLKSRC_VERSATILE is not set +# CONFIG_CLK_HSDK is not set +# CONFIG_CLK_QORIQ is not set +# CONFIG_CLOCK_THERMAL is not set +CONFIG_CLS_U32_MARK=y +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM3605 is not set +# CONFIG_CM36651 is not set +# CONFIG_CMA is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_CMDLINE_EXTEND is not set +# CONFIG_CMDLINE_FORCE is not set +# CONFIG_CMDLINE_FROM_BOOTLOADER is not set +# CONFIG_CMDLINE_PARTITION is not set +# CONFIG_CNIC is not set +# CONFIG_CODA_FS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_COMEDI is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +# CONFIG_COMMON_CLK_CS2000_CP is not set +# CONFIG_COMMON_CLK_FIXED_MMIO is not set +# CONFIG_COMMON_CLK_IPROC is not set +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_MT6765 is not set +# CONFIG_COMMON_CLK_MT8167 is not set +# CONFIG_COMMON_CLK_MT8167_AUDSYS is not set +# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set +# CONFIG_COMMON_CLK_MT8167_MFGCFG is not set +# CONFIG_COMMON_CLK_MT8167_MMSYS is not set +# CONFIG_COMMON_CLK_MT8167_VDECSYS is not set +# CONFIG_COMMON_CLK_NXP is not set +# CONFIG_COMMON_CLK_PIC32 is not set +# CONFIG_COMMON_CLK_PWM is not set +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_QCOM is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI5341 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_VC5 is not set +# CONFIG_COMMON_CLK_XGENE is not set +# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +CONFIG_COMPACTION=y +# CONFIG_COMPAL_LAPTOP is not set +# CONFIG_COMPAT is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_COMPILE_TEST is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_CONNECTOR is not set +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_CONSTRUCTORS=y +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_COPS is not set +# CONFIG_CORDIC is not set +# CONFIG_COREDUMP is not set +# CONFIG_CORESIGHT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_CORTINA_PHY is not set +# CONFIG_COUNTER is not set +# CONFIG_CPA_DEBUG is not set +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_THERMAL is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set +# CONFIG_CPU_IDLE is not set +# CONFIG_CPU_IDLE_GOV_LADDER is not set +# CONFIG_CPU_IDLE_GOV_MENU is not set +# CONFIG_CPU_IDLE_GOV_TEO is not set +# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set +# CONFIG_CPU_ISOLATION is not set +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +CONFIG_CPU_SW_DOMAIN_PAN=y +# CONFIG_CPU_THERMAL is not set +# CONFIG_CRAMFS is not set +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_CRAMFS_MTD is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_CRC32_BIT is not set +CONFIG_CRC32_SARWATE=y +# CONFIG_CRC32_SELFTEST is not set +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SLICEBY8 is not set +# CONFIG_CRC4 is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC7 is not set +# CONFIG_CRC8 is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CROSS_COMPILE="" +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_842 is not set +CONFIG_CRYPTO_ACOMP2=y +# CONFIG_CRYPTO_ADIANTUM is not set +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_AEGIS128L is not set +# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS256 is not set +# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_AES_ARM is not set +# CONFIG_CRYPTO_AES_ARM64 is not set +# CONFIG_CRYPTO_AES_ARM64_BS is not set +# CONFIG_CRYPTO_AES_ARM64_CE is not set +# CONFIG_CRYPTO_AES_ARM64_CE_BLK is not set +# CONFIG_CRYPTO_AES_ARM64_CE_CCM is not set +# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set +# CONFIG_CRYPTO_AES_ARM_BS is not set +# CONFIG_CRYPTO_AES_ARM_CE is not set +# CONFIG_CRYPTO_AES_NI_INTEL is not set +# CONFIG_CRYPTO_AES_TI is not set +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_BLAKE2B is not set +# CONFIG_CRYPTO_BLAKE2S is not set +# CONFIG_CRYPTO_BLAKE2S_X86 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CCM=y +# CONFIG_CRYPTO_CFB is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_CHACHA20_NEON is not set +# CONFIG_CRYPTO_CHACHA20_X86_64 is not set +# CONFIG_CRYPTO_CHACHA_MIPS is not set +# CONFIG_CRYPTO_CMAC is not set +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CRC32C_INTEL is not set +# CONFIG_CRYPTO_CRC32_ARM_CE is not set +# CONFIG_CRYPTO_CRCT10DIF is not set +# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set +# CONFIG_CRYPTO_CRCT10DIF_ARM_CE is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_CTR=y +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_CURVE25519 is not set +# CONFIG_CRYPTO_CURVE25519_NEON is not set +# CONFIG_CRYPTO_CURVE25519_X86 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set +# CONFIG_CRYPTO_DEV_ATMEL_AES is not set +# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set +# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set +# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set +# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set +# CONFIG_CRYPTO_DEV_CCREE is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_HISI_SEC is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set +# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set +# CONFIG_CRYPTO_DEV_MV_CESA is not set +# CONFIG_CRYPTO_DEV_MXC_SCC is not set +# CONFIG_CRYPTO_DEV_MXS_DCP is not set +# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set +# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set +# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set +# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set +# CONFIG_CRYPTO_DEV_QAT_C62X is not set +# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set +# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set +# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set +# CONFIG_CRYPTO_DEV_SAHARA is not set +# CONFIG_CRYPTO_DEV_SP_PSP is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +# CONFIG_CRYPTO_DEV_VIRTIO is not set +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_MENU is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_ECDH is not set +# CONFIG_CRYPTO_ECHAINIV is not set +# CONFIG_CRYPTO_ECRDSA is not set +# CONFIG_CRYPTO_ESSIV is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_GHASH=y +# CONFIG_CRYPTO_GHASH_ARM64_CE is not set +# CONFIG_CRYPTO_GHASH_ARM_CE is not set +# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_JITTERENTROPY is not set +# CONFIG_CRYPTO_KEYWRAP is not set +# CONFIG_CRYPTO_KHAZAD is not set +CONFIG_CRYPTO_KPP=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_LIB_ARC4=y +# CONFIG_CRYPTO_LIB_BLAKE2S is not set +# CONFIG_CRYPTO_LIB_CHACHA is not set +# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_LIB_CURVE25519 is not set +# CONFIG_CRYPTO_LIB_POLY1305 is not set +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9 +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +# CONFIG_CRYPTO_MCRYPTD is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_MORUS1280 is not set +# CONFIG_CRYPTO_MORUS1280_AVX2 is not set +# CONFIG_CRYPTO_MORUS1280_SSE2 is not set +# CONFIG_CRYPTO_MORUS640 is not set +# CONFIG_CRYPTO_MORUS640_SSE2 is not set +# CONFIG_CRYPTO_NHPOLY1305_NEON is not set +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_OFB is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_PCOMP is not set +# CONFIG_CRYPTO_PCOMP2 is not set +CONFIG_CRYPTO_PCRYPT=y +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_POLY1305_ARM is not set +# CONFIG_CRYPTO_POLY1305_MIPS is not set +# CONFIG_CRYPTO_POLY1305_NEON is not set +# CONFIG_CRYPTO_POLY1305_X86_64 is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_RNG is not set +# CONFIG_CRYPTO_RSA is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA1_ARM is not set +# CONFIG_CRYPTO_SHA1_ARM64_CE is not set +# CONFIG_CRYPTO_SHA1_ARM_CE is not set +# CONFIG_CRYPTO_SHA1_ARM_NEON is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA256_ARM is not set +# CONFIG_CRYPTO_SHA256_ARM64 is not set +# CONFIG_CRYPTO_SHA2_ARM64_CE is not set +# CONFIG_CRYPTO_SHA2_ARM_CE is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_SHA3_ARM64 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA512_ARM is not set +# CONFIG_CRYPTO_SHA512_ARM64 is not set +# CONFIG_CRYPTO_SHA512_ARM64_CE is not set +# CONFIG_CRYPTO_SIMD is not set +CONFIG_CRYPTO_SKCIPHER=y +CONFIG_CRYPTO_SKCIPHER2=y +# CONFIG_CRYPTO_SM2 is not set +# CONFIG_CRYPTO_SM3 is not set +# CONFIG_CRYPTO_SM3_ARM64_CE is not set +# CONFIG_CRYPTO_SM4 is not set +# CONFIG_CRYPTO_SM4_ARM64_CE is not set +# CONFIG_CRYPTO_SPECK is not set +# CONFIG_CRYPTO_STATS is not set +# CONFIG_CRYPTO_STREEBOG is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_TWOFISH_COMMON is not set +# CONFIG_CRYPTO_USER is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_VMAC is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_XXHASH is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_ZSTD is not set +# CONFIG_CS5535_MFGPT is not set +# CONFIG_CS89x0 is not set +# CONFIG_CSD_LOCK_WAIT_DEBUG is not set +# CONFIG_CUSE is not set +# CONFIG_CW1200 is not set +# CONFIG_CXD2880_SPI_DRV is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_EEH is not set +# CONFIG_CXL_KERNEL_API is not set +# CONFIG_CXL_LIB is not set +# CONFIG_CYPRESS_FIRMWARE is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DAX is not set +# CONFIG_DCB is not set +# CONFIG_DDR is not set +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_EFI is not set +# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_FS_ALLOW_ALL=y +# CONFIG_DEBUG_FS_ALLOW_NONE is not set +# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set +# CONFIG_DEBUG_GPIO is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_INFO_BTF is not set +# CONFIG_DEBUG_INFO_COMPRESSED is not set +# CONFIG_DEBUG_INFO_DWARF4 is not set +CONFIG_DEBUG_INFO_REDUCED=y +# CONFIG_DEBUG_INFO_SPLIT is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KOBJECT_RELEASE is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_DEBUG_LL_UART_8250 is not set +# CONFIG_DEBUG_LL_UART_PL01X is not set +# CONFIG_DEBUG_LOCKDEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_MISC is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_PLIST is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_RSEQ is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +# CONFIG_DEBUG_SEMIHOSTING is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_DEBUG_TIMEKEEPING is not set +# CONFIG_DEBUG_UART_8250_PALMCHIP is not set +# CONFIG_DEBUG_UART_8250_WORD is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +# CONFIG_DEBUG_UART_FLOW_CONTROL is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_VIRTUAL is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VM_PGTABLE is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_WX is not set +# CONFIG_DEBUG_ZBOOT is not set +# CONFIG_DECNET is not set +# CONFIG_DEFAULT_CODEL is not set +CONFIG_DEFAULT_CUBIC=y +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_FQ is not set +CONFIG_DEFAULT_FQ_CODEL=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +CONFIG_DEFAULT_INIT="" +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_DEFAULT_NET_SCH="fq_codel" +# CONFIG_DEFAULT_NOOP is not set +# CONFIG_DEFAULT_PFIFO_FAST is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_SECURITY="" +CONFIG_DEFAULT_SECURITY_DAC=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SFQ is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set +# CONFIG_DELL_LAPTOP is not set +# CONFIG_DELL_RBTN is not set +# CONFIG_DELL_SMBIOS is not set +# CONFIG_DELL_SMO8800 is not set +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_DEVKMEM is not set +# CONFIG_DEVMEM is not set +CONFIG_DEVPORT=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_DEVTMPFS is not set +# CONFIG_DEVTMPFS_MOUNT is not set +# CONFIG_DEV_DAX is not set +# CONFIG_DGAP is not set +# CONFIG_DGNC is not set +# CONFIG_DHT11 is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set +# CONFIG_DISPLAY_CONNECTOR_DVI is not set +# CONFIG_DISPLAY_CONNECTOR_HDMI is not set +# CONFIG_DISPLAY_ENCODER_TFP410 is not set +# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set +# CONFIG_DISPLAY_PANEL_DPI is not set +# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DL2K is not set +# CONFIG_DLHL60D is not set +# CONFIG_DLM is not set +# CONFIG_DM9000 is not set +# CONFIG_DMABUF_HEAPS is not set +# CONFIG_DMABUF_MOVE_NOTIFY is not set +# CONFIG_DMABUF_SELFTESTS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_DMADEVICES_DEBUG is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +# CONFIG_DMASCC is not set +# CONFIG_DMATEST is not set +# CONFIG_DMA_API_DEBUG is not set +CONFIG_DMA_COHERENT_POOL=y +CONFIG_DMA_DECLARE_COHERENT=y +# CONFIG_DMA_ENGINE is not set +# CONFIG_DMA_FENCE_TRACE is not set +# CONFIG_DMA_JZ4780 is not set +CONFIG_DMA_NONCOHERENT_MMAP=y +# CONFIG_DMA_NOOP_OPS is not set +# CONFIG_DMA_PERNUMA_CMA is not set +# CONFIG_DMA_SHARED_BUFFER is not set +# CONFIG_DMA_VIRT_OPS is not set +# CONFIG_DM_CACHE is not set +# CONFIG_DM_CLONE is not set +# CONFIG_DM_DEBUG is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_DUST is not set +# CONFIG_DM_EBS is not set +# CONFIG_DM_ERA is not set +# CONFIG_DM_FLAKEY is not set +# CONFIG_DM_INTEGRITY is not set +# CONFIG_DM_LOG_USERSPACE is not set +# CONFIG_DM_LOG_WRITES is not set +# CONFIG_DM_MQ_DEFAULT is not set +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_RAID is not set +# CONFIG_DM_SWITCH is not set +# CONFIG_DM_THIN_PROVISIONING is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_DM_UNSTRIPED is not set +# CONFIG_DM_VERITY is not set +# CONFIG_DM_WRITECACHE is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DNET is not set +# CONFIG_DNOTIFY is not set +# CONFIG_DNS_RESOLVER is not set +CONFIG_DOUBLEFAULT=y +# CONFIG_DP83822_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +# CONFIG_DP83869_PHY is not set +# CONFIG_DP83TC811_PHY is not set +# CONFIG_DPOT_DAC is not set +# CONFIG_DPS310 is not set +CONFIG_DQL=y +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_DRM is not set +# CONFIG_DRM_AMDGPU is not set +# CONFIG_DRM_AMDGPU_CIK is not set +# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set +# CONFIG_DRM_AMDGPU_SI is not set +# CONFIG_DRM_AMDGPU_USERPTR is not set +# CONFIG_DRM_AMD_ACP is not set +# CONFIG_DRM_AMD_DC_DCN2_0 is not set +# CONFIG_DRM_AMD_DC_DCN3_0 is not set +# CONFIG_DRM_AMD_DC_HDCP is not set +# CONFIG_DRM_AMD_DC_SI is not set +# CONFIG_DRM_ANALOGIX_ANX6345 is not set +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_ARCPGU is not set +# CONFIG_DRM_ARMADA is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_CDNS_DSI is not set +# CONFIG_DRM_CDNS_MHDP8546 is not set +# CONFIG_DRM_CHRONTEL_CH7033 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set +# CONFIG_DRM_DEBUG_MM is not set +# CONFIG_DRM_DEBUG_SELFTEST is not set +# CONFIG_DRM_DISPLAY_CONNECTOR is not set +# CONFIG_DRM_DP_AUX_CHARDEV is not set +# CONFIG_DRM_DP_CEC is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +# CONFIG_DRM_DW_HDMI_CEC is not set +# CONFIG_DRM_ETNAVIV is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_FBDEV_EMULATION is not set +# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set +# CONFIG_DRM_FSL_DCU is not set +# CONFIG_DRM_GM12U320 is not set +# CONFIG_DRM_GMA500 is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_HISI_HIBMC is not set +# CONFIG_DRM_HISI_KIRIN is not set +# CONFIG_DRM_I2C_ADV7511 is not set +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_SIL164 is not set +# CONFIG_DRM_I915 is not set +# CONFIG_DRM_KOMEDA is not set +# CONFIG_DRM_LEGACY is not set +# CONFIG_DRM_LIB_RANDOM is not set +# CONFIG_DRM_LIMA is not set +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +# CONFIG_DRM_LONTIUM_LT9611 is not set +# CONFIG_DRM_LVDS_CODEC is not set +# CONFIG_DRM_LVDS_ENCODER is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_MCDE is not set +# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_MXSFB is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_NWL_MIPI_DSI is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_OMAP is not set +# CONFIG_DRM_PANEL_ARM_VERSATILE is not set +# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set +# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set +# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set +# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set +# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set +# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set +# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set +# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set +# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set +# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set +# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set +# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set +# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set +# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set +# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DRM_PANEL_TPO_TPG110 is not set +# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set +# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set +# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set +# CONFIG_DRM_PANFROST is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_PARADE_PS8640 is not set +# CONFIG_DRM_PL111 is not set +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_RADEON_USERPTR is not set +# CONFIG_DRM_RCAR_DW_HDMI is not set +# CONFIG_DRM_RCAR_LVDS is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_SII9234 is not set +# CONFIG_DRM_SIL_SII8620 is not set +# CONFIG_DRM_SIMPLE_BRIDGE is not set +# CONFIG_DRM_STI is not set +# CONFIG_DRM_STM is not set +# CONFIG_DRM_SUN4I is not set +# CONFIG_DRM_THINE_THC63LVD1024 is not set +# CONFIG_DRM_TIDSS is not set +# CONFIG_DRM_TILCDC is not set +# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_TI_SN65DSI86 is not set +# CONFIG_DRM_TI_TFP410 is not set +# CONFIG_DRM_TI_TPD12S015 is not set +# CONFIG_DRM_TOSHIBA_TC358762 is not set +# CONFIG_DRM_TOSHIBA_TC358764 is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +# CONFIG_DRM_TOSHIBA_TC358768 is not set +# CONFIG_DRM_TOSHIBA_TC358775 is not set +# CONFIG_DRM_TVE200 is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_VBOXVIDEO is not set +# CONFIG_DRM_VC4_HDMI_CEC is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_VIRTIO_GPU is not set +# CONFIG_DRM_VKMS is not set +# CONFIG_DRM_VMWGFX is not set +# CONFIG_DRM_XEN is not set +# CONFIG_DS1682 is not set +# CONFIG_DS1803 is not set +# CONFIG_DS4424 is not set +# CONFIG_DST_CACHE is not set +# CONFIG_DTLK is not set +# CONFIG_DUMMY is not set +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +# CONFIG_DUMMY_IRQ is not set +# CONFIG_DVB_A8293 is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DVB_AF9033 is not set +# CONFIG_DVB_AS102 is not set +# CONFIG_DVB_ASCOT2E is not set +# CONFIG_DVB_ATBM8830 is not set +# CONFIG_DVB_AU8522_DTV is not set +# CONFIG_DVB_AU8522_V4L is not set +# CONFIG_DVB_B2C2_FLEXCOP_USB is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_CX24117 is not set +# CONFIG_DVB_CX24120 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_CXD2099 is not set +# CONFIG_DVB_CXD2820R is not set +# CONFIG_DVB_CXD2841ER is not set +# CONFIG_DVB_CXD2880 is not set +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +# CONFIG_DVB_DIB7000M is not set +# CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_DIB8000 is not set +# CONFIG_DVB_DIB9000 is not set +# CONFIG_DVB_DRX39XYJ is not set +# CONFIG_DVB_DRXD is not set +# CONFIG_DVB_DRXK is not set +# CONFIG_DVB_DS3000 is not set +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_DYNAMIC_MINORS is not set +# CONFIG_DVB_EC100 is not set +# CONFIG_DVB_FIREDTV is not set +# CONFIG_DVB_HELENE is not set +# CONFIG_DVB_HORUS3A is not set +# CONFIG_DVB_ISL6405 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_ISL6423 is not set +# CONFIG_DVB_IX2505V is not set +# CONFIG_DVB_L64781 is not set +# CONFIG_DVB_LG2160 is not set +# CONFIG_DVB_LGDT3305 is not set +# CONFIG_DVB_LGDT3306A is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGS8GL5 is not set +# CONFIG_DVB_LGS8GXX is not set +# CONFIG_DVB_LNBH25 is not set +# CONFIG_DVB_LNBH29 is not set +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_LNBP22 is not set +# CONFIG_DVB_M88DS3103 is not set +# CONFIG_DVB_M88RS2000 is not set +CONFIG_DVB_MAX_ADAPTERS=16 +# CONFIG_DVB_MB86A16 is not set +# CONFIG_DVB_MB86A20S is not set +# CONFIG_DVB_MMAP is not set +# CONFIG_DVB_MN88443X is not set +# CONFIG_DVB_MN88472 is not set +# CONFIG_DVB_MN88473 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_MXL5XX is not set +# CONFIG_DVB_NET is not set +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_RTL2830 is not set +# CONFIG_DVB_RTL2832 is not set +# CONFIG_DVB_RTL2832_SDR is not set +# CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_S5H1411 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_S5H1432 is not set +# CONFIG_DVB_S921 is not set +# CONFIG_DVB_SI2165 is not set +# CONFIG_DVB_SI2168 is not set +# CONFIG_DVB_SI21XX is not set +# CONFIG_DVB_SP2 is not set +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6000 is not set +# CONFIG_DVB_STB6100 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STV0297 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_STV0367 is not set +# CONFIG_DVB_STV0900 is not set +# CONFIG_DVB_STV090x is not set +# CONFIG_DVB_STV0910 is not set +# CONFIG_DVB_STV6110 is not set +# CONFIG_DVB_STV6110x is not set +# CONFIG_DVB_STV6111 is not set +# CONFIG_DVB_TC90522 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_TDA10048 is not set +# CONFIG_DVB_TDA1004X is not set +# CONFIG_DVB_TDA10071 is not set +# CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA18271C2DD is not set +# CONFIG_DVB_TDA665x is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_TDA8261 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TEST_DRIVERS is not set +# CONFIG_DVB_TS2020 is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_TUNER_CX24113 is not set +# CONFIG_DVB_TUNER_DIB0070 is not set +# CONFIG_DVB_TUNER_DIB0090 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_ULE_DEBUG is not set +# CONFIG_DVB_USB_V2 is not set +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_ZD1301_DEMOD is not set +# CONFIG_DVB_ZL10036 is not set +# CONFIG_DVB_ZL10039 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DWC_XLGMAC is not set +# CONFIG_DWMAC_DWC_QOS_ETH is not set +# CONFIG_DWMAC_INTEL_PLAT is not set +# CONFIG_DWMAC_IPQ806X is not set +# CONFIG_DWMAC_LPC18XX is not set +# CONFIG_DWMAC_MESON is not set +# CONFIG_DWMAC_ROCKCHIP is not set +# CONFIG_DWMAC_SOCFPGA is not set +# CONFIG_DWMAC_STI is not set +# CONFIG_DW_AXI_DMAC is not set +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_DW_EDMA is not set +# CONFIG_DW_EDMA_PCIE is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_DYNAMIC_DEBUG is not set +CONFIG_DYNAMIC_DEBUG_CORE=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_HWTS is not set +# CONFIG_EARLY_PRINTK_8250 is not set +# CONFIG_EARLY_PRINTK_USB_XDBC is not set +# CONFIG_EBC_C384_WDT is not set +# CONFIG_ECHO is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_EDAC is not set +# CONFIG_EEEPC_LAPTOP is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_DIGSY_MTC_CFG is not set +# CONFIG_EEPROM_EE1004 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EFI is not set +CONFIG_EFI_PARTITION=y +# CONFIG_EFI_VARS_PSTORE is not set +# CONFIG_EFS_FS is not set +CONFIG_ELFCORE=y +# CONFIG_ELF_CORE is not set +# CONFIG_EMAC_ROCKCHIP is not set +CONFIG_EMBEDDED=y +# CONFIG_EM_TIMER_STI is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENA_ETHERNET is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_ENERGY_MODEL is not set +# CONFIG_ENIC is not set +# CONFIG_ENVELOPE_DETECTOR is not set +# CONFIG_EPAPR_PARAVIRT is not set +# CONFIG_EPIC100 is not set +CONFIG_EPOLL=y +# CONFIG_EQUALIZER is not set +# CONFIG_EROFS_FS is not set +# CONFIG_ET131X is not set +CONFIG_ETHERNET=y +# CONFIG_ETHOC is not set +CONFIG_ETHTOOL_NETLINK=y +CONFIG_EVENTFD=y +# CONFIG_EVM is not set +# CONFIG_EXFAT_FS is not set +CONFIG_EXPERT=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_DEBUG is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_FS is not set +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_EXT4_USE_FOR_EXT2=y +# CONFIG_EXTCON is not set +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_ARIZONA is not set +# CONFIG_EXTCON_AXP288 is not set +# CONFIG_EXTCON_FSA9480 is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_INTEL_INT3496 is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_PTN5150 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +# CONFIG_EXTCON_USB_GPIO is not set +CONFIG_EXTRA_FIRMWARE="" +CONFIG_EXTRA_TARGETS="" +# CONFIG_EXYNOS_ADC is not set +# CONFIG_EXYNOS_VIDEO is not set +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_FAULT_INJECTION is not set +# CONFIG_F2FS_FS is not set +# CONFIG_F2FS_FS_COMPRESSION is not set +# CONFIG_F2FS_FS_ENCRYPTION is not set +# CONFIG_F2FS_FS_POSIX_ACL is not set +# CONFIG_F2FS_FS_SECURITY is not set +CONFIG_F2FS_FS_XATTR=y +# CONFIG_F2FS_IO_TRACE is not set +CONFIG_F2FS_STAT_FS=y +# CONFIG_FAILOVER is not set +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_FANOTIFY is not set +# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_FAT_FS is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_FB is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_BIG_ENDIAN is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_BOTH_ENDIAN is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_DA8XX is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_FLEX is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_FSL_DIU is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_IMX is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_LITTLE_ENDIAN is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_MXS is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_NEOMAGIC is not set +CONFIG_FB_NOTIFY=y +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_OMAP2 is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_PS3 is not set +# CONFIG_FB_PXA is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_SM712 is not set +# CONFIG_FB_SM750 is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_TFT is not set +# CONFIG_FB_TFT_AGM1264K_FL is not set +# CONFIG_FB_TFT_BD663474 is not set +# CONFIG_FB_TFT_FBTFT_DEVICE is not set +# CONFIG_FB_TFT_HX8340BN is not set +# CONFIG_FB_TFT_HX8347D is not set +# CONFIG_FB_TFT_HX8353D is not set +# CONFIG_FB_TFT_HX8357D is not set +# CONFIG_FB_TFT_ILI9163 is not set +# CONFIG_FB_TFT_ILI9320 is not set +# CONFIG_FB_TFT_ILI9325 is not set +# CONFIG_FB_TFT_ILI9340 is not set +# CONFIG_FB_TFT_ILI9341 is not set +# CONFIG_FB_TFT_ILI9481 is not set +# CONFIG_FB_TFT_ILI9486 is not set +# CONFIG_FB_TFT_PCD8544 is not set +# CONFIG_FB_TFT_RA8875 is not set +# CONFIG_FB_TFT_S6D02A1 is not set +# CONFIG_FB_TFT_S6D1121 is not set +# CONFIG_FB_TFT_SEPS525 is not set +# CONFIG_FB_TFT_SH1106 is not set +# CONFIG_FB_TFT_SSD1289 is not set +# CONFIG_FB_TFT_SSD1305 is not set +# CONFIG_FB_TFT_SSD1306 is not set +# CONFIG_FB_TFT_SSD1325 is not set +# CONFIG_FB_TFT_SSD1331 is not set +# CONFIG_FB_TFT_SSD1351 is not set +# CONFIG_FB_TFT_ST7735R is not set +# CONFIG_FB_TFT_ST7789V is not set +# CONFIG_FB_TFT_TINYLCD is not set +# CONFIG_FB_TFT_TLS8204 is not set +# CONFIG_FB_TFT_UC1611 is not set +# CONFIG_FB_TFT_UC1701 is not set +# CONFIG_FB_TFT_UPD161704 is not set +# CONFIG_FB_TFT_WATTEROTT is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TMIO is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_XGI is not set +# CONFIG_FCOE is not set +# CONFIG_FCOE_FNIC is not set +# CONFIG_FDDI is not set +# CONFIG_FEALNX is not set +# CONFIG_FENCE_TRACE is not set +# CONFIG_FHANDLE is not set +CONFIG_FIB_RULES=y +# CONFIG_FIELDBUS_DEV is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_FIREWIRE_SERIAL is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FIRMWARE_MEMMAP is not set +# CONFIG_FIT_PARTITION is not set +# CONFIG_FIXED_PHY is not set +CONFIG_FLATMEM=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_FM10K is not set +# CONFIG_FMC is not set +# CONFIG_FONTS is not set +# CONFIG_FONT_6x8 is not set +# CONFIG_FONT_TER16x32 is not set +# CONFIG_FORCEDETH is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORTIFY_SOURCE=y +# CONFIG_FPGA is not set +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_FREEZER is not set +# CONFIG_FRONTSWAP is not set +# CONFIG_FSCACHE is not set +# CONFIG_FSI is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_FSL_ENETC is not set +# CONFIG_FSL_ENETC_MDIO is not set +# CONFIG_FSL_ENETC_VF is not set +# CONFIG_FSL_ERRATUM_A008585 is not set +# CONFIG_FSL_MC_BUS is not set +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_QDMA is not set +# CONFIG_FSL_RCPM is not set +# CONFIG_FSL_XGMAC_MDIO is not set +CONFIG_FSNOTIFY=y +# CONFIG_FS_DAX is not set +# CONFIG_FS_ENCRYPTION is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FS_VERITY is not set +# CONFIG_FTGMAC100 is not set +# CONFIG_FTL is not set +# CONFIG_FTMAC100 is not set +# CONFIG_FTRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_FTWDT010_WATCHDOG is not set +# CONFIG_FUJITSU_ERRATUM_010001 is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_FUJITSU_TABLET is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_FUSE_FS is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +# CONFIG_FUSION_SPI is not set +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_FW_LOADER=y +# CONFIG_FW_LOADER_COMPRESS is not set +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FXAS21002C is not set +# CONFIG_FXOS8700_I2C is not set +# CONFIG_FXOS8700_SPI is not set +CONFIG_GACT_PROB=y +# CONFIG_GADGET_UAC1 is not set +# CONFIG_GAMEPORT is not set +# CONFIG_GATEWORKS_GW16083 is not set +# CONFIG_GCC_PLUGINS is not set +# CONFIG_GCOV is not set +# CONFIG_GCOV_KERNEL is not set +# CONFIG_GDB_SCRIPTS is not set +# CONFIG_GEMINI_ETHERNET is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_GENERIC_IRQ_IPI=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_NET_UTILS=y +# CONFIG_GENERIC_PHY is not set +CONFIG_GENERIC_PTDUMP=y +CONFIG_GENERIC_VDSO_TIME_NS=y +# CONFIG_GENEVE is not set +# CONFIG_GENWQE is not set +# CONFIG_GFS2_FS is not set +# CONFIG_GIGASET_CAPI is not set +# CONFIG_GIGASET_DEBUG is not set +# CONFIG_GIGASET_DUMMYLL is not set +# CONFIG_GLOB_SELFTEST is not set +# CONFIG_GNSS is not set +# CONFIG_GOLDFISH is not set +# CONFIG_GOOGLE_FIRMWARE is not set +# CONFIG_GP2AP002 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_GPD_POCKET_FAN is not set +# CONFIG_GPIOLIB is not set +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +# CONFIG_GPIO_104_DIO_48E is not set +# CONFIG_GPIO_104_IDIO_16 is not set +# CONFIG_GPIO_104_IDI_48 is not set +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_AGGREGATOR is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_AMDPT is not set +# CONFIG_GPIO_AMD_FCH is not set +# CONFIG_GPIO_BCM_KONA is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_CADENCE is not set +# CONFIG_GPIO_CASCADE is not set +# CONFIG_GPIO_CDEV is not set +# CONFIG_GPIO_CDEV_V1 is not set +# CONFIG_GPIO_CS5535 is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_F7188X is not set +# CONFIG_GPIO_FTGPIO010 is not set +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_GPIO_MM is not set +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_GW_PLD is not set +# CONFIG_GPIO_HLWD is not set +# CONFIG_GPIO_ICH is not set +# CONFIG_GPIO_IT87 is not set +# CONFIG_GPIO_LOGICVC is not set +# CONFIG_GPIO_LYNXPOINT is not set +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_MB86S7X is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_MPC8XXX is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCA953X_IRQ is not set +# CONFIG_GPIO_PCA9570 is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_PCH is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_PL061 is not set +# CONFIG_GPIO_RCAR is not set +# CONFIG_GPIO_RDC321X is not set +# CONFIG_GPIO_SAMA5D2_PIOBU is not set +# CONFIG_GPIO_SCH is not set +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SIFIVE is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_GPIO_TPIC2810 is not set +# CONFIG_GPIO_TS4900 is not set +# CONFIG_GPIO_TS5500 is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_GPIO_WINBOND is not set +# CONFIG_GPIO_WS16C48 is not set +# CONFIG_GPIO_XGENE is not set +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_XRA1403 is not set +# CONFIG_GPIO_ZEVIO is not set +# CONFIG_GPIO_ZX is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_GREYBUS is not set +# CONFIG_GS_FPGABOOT is not set +# CONFIG_GTP is not set +# CONFIG_GUP_BENCHMARK is not set +# CONFIG_GVE is not set +# CONFIG_HABANA_AI is not set +# CONFIG_HAMACHI is not set +# CONFIG_HAMRADIO is not set +# CONFIG_HAPPYMEAL is not set +CONFIG_HARDENED_USERCOPY=y +# CONFIG_HARDENED_USERCOPY_FALLBACK is not set +# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set +CONFIG_HARDEN_EL2_VECTORS=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_HAVE_ARM_ARCH_TIMER is not set +# CONFIG_HCALL_STATS is not set +# CONFIG_HDC100X is not set +# CONFIG_HDC2010 is not set +# CONFIG_HDLC is not set +# CONFIG_HDLC_CISCO is not set +# CONFIG_HDLC_FR is not set +# CONFIG_HDLC_PPP is not set +# CONFIG_HDLC_RAW is not set +# CONFIG_HDLC_RAW_ETH is not set +# CONFIG_HDMI_LPE_AUDIO is not set +# CONFIG_HDQ_MASTER_OMAP is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_HEADERS_INSTALL is not set +# CONFIG_HEADER_TEST is not set +# CONFIG_HERMES is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFSPLUS_FS_POSIX_ACL is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFS_FS_POSIX_ACL is not set +# CONFIG_HI8435 is not set +# CONFIG_HIBERNATION is not set +# CONFIG_HID is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_ACCUTOUCH is not set +# CONFIG_HID_ACRUX is not set +# CONFIG_HID_ACRUX_FF is not set +# CONFIG_HID_ALPS is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_ASUS is not set +# CONFIG_HID_AUREAL is not set +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_BETOP_FF is not set +# CONFIG_HID_BIGBEN_FF is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_COUGAR is not set +# CONFIG_HID_CP2112 is not set +# CONFIG_HID_CREATIVE_SB0540 is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_ELAN is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GENERIC is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_GLORIOUS is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_ITE is not set +# CONFIG_HID_JABRA is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_LOGITECH_DJ is not set +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_HID_MACALLY is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MALTRON is not set +# CONFIG_HID_MAYFLASH is not set +# CONFIG_HID_MCP2221 is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTI is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PID is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_REDRAGON is not set +# CONFIG_HID_RETRODE is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEAM is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_U2FZERO is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_UDRAW_PS3 is not set +# CONFIG_HID_VIEWSONIC is not set +# CONFIG_HID_VIVALDI is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HIGHMEM is not set +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_HINIC is not set +# CONFIG_HIP04_ETH is not set +# CONFIG_HIPPI is not set +# CONFIG_HISILICON_ERRATUM_161010101 is not set +# CONFIG_HISILICON_ERRATUM_161600802 is not set +# CONFIG_HISI_DMA is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HISI_HIKEY_USB is not set +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HMC425 is not set +# CONFIG_HMC6352 is not set +# CONFIG_HNS is not set +# CONFIG_HNS3 is not set +# CONFIG_HNS_DSAF is not set +# CONFIG_HNS_ENET is not set +# CONFIG_HOSTAP is not set +# CONFIG_HOSTAP_CS is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HP03 is not set +# CONFIG_HP100 is not set +# CONFIG_HP206C is not set +CONFIG_HPET_MMAP_DEFAULT=y +# CONFIG_HPFS_FS is not set +# CONFIG_HP_ILO is not set +# CONFIG_HP_WIRELESS is not set +# CONFIG_HSA_AMD is not set +# CONFIG_HSI is not set +# CONFIG_HSR is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_HVC_DCC is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_HWLAT_TRACER is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON_VID is not set +# CONFIG_HWSPINLOCK is not set +# CONFIG_HWSPINLOCK_OMAP is not set +CONFIG_HW_PERF_EVENTS=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HW_RANDOM_AMD is not set +# CONFIG_HW_RANDOM_ATMEL is not set +# CONFIG_HW_RANDOM_BA431 is not set +# CONFIG_HW_RANDOM_CAVIUM is not set +# CONFIG_HW_RANDOM_CCTRNG is not set +# CONFIG_HW_RANDOM_EXYNOS is not set +# CONFIG_HW_RANDOM_GEODE is not set +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_IPROC_RNG200 is not set +# CONFIG_HW_RANDOM_MTK is not set +# CONFIG_HW_RANDOM_OMAP is not set +# CONFIG_HW_RANDOM_OMAP3_ROM is not set +# CONFIG_HW_RANDOM_PPC4XX is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_TPM=y +# CONFIG_HW_RANDOM_VIA is not set +# CONFIG_HW_RANDOM_VIRTIO is not set +# CONFIG_HW_RANDOM_XIPHERA is not set +# CONFIG_HX711 is not set +# CONFIG_HYPERV is not set +# CONFIG_HYPERV_TSCPAGE is not set +# CONFIG_HYSDN is not set +CONFIG_HZ=100 +CONFIG_HZ_100=y +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_200 is not set +# CONFIG_HZ_24 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_48 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_PERIODIC is not set +# CONFIG_I2C is not set +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_AU1550 is not set +# CONFIG_I2C_BCM2835 is not set +# CONFIG_I2C_BCM_IPROC is not set +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_CHARDEV is not set +# CONFIG_I2C_COMPAT is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_EG20T is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_EMEV2 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set +# CONFIG_I2C_HELPER_AUTO is not set +# CONFIG_I2C_HID is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_IBM_IIC is not set +# CONFIG_I2C_IMG is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_ISMT is not set +# CONFIG_I2C_JZ4780 is not set +# CONFIG_I2C_MLXCPLD is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_MT65XX is not set +# CONFIG_I2C_MUX is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_GPMUX is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_MLXCPLD is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_MV64XXX is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_NVIDIA_GPU is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OCTEON is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_RCAR is not set +# CONFIG_I2C_RK3X is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_S3C2410 is not set +# CONFIG_I2C_SCMI is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_SMBUS is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VERSATILE is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I3C is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +# CONFIG_IAQCORE is not set +# CONFIG_IBM_ASM is not set +# CONFIG_IBM_EMAC_DEBUG is not set +# CONFIG_IBM_EMAC_EMAC4 is not set +# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_EMAC_RGMII is not set +# CONFIG_IBM_EMAC_TAH is not set +# CONFIG_IBM_EMAC_ZMII is not set +# CONFIG_ICE is not set +# CONFIG_ICP10100 is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_ICS932S401 is not set +# CONFIG_IDE is not set +# CONFIG_IDEAPAD_LAPTOP is not set +# CONFIG_IDE_GD is not set +# CONFIG_IDE_PROC_FS is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDLE_PAGE_TRACKING is not set +# CONFIG_IEEE802154 is not set +# CONFIG_IEEE802154_ADF7242 is not set +# CONFIG_IEEE802154_ATUSB is not set +# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_IEEE802154_HWSIM is not set +# CONFIG_IEEE802154_MCR20A is not set +# CONFIG_IFB is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_IGC is not set +# CONFIG_IIO is not set +# CONFIG_IIO_BUFFER is not set +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_DMA is not set +# CONFIG_IIO_BUFFER_DMAENGINE is not set +# CONFIG_IIO_BUFFER_HDC2010 is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_MUX is not set +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set +# CONFIG_IIO_RESCALE is not set +# CONFIG_IIO_SIMPLE_DUMMY is not set +# CONFIG_IIO_SSP_SENSORHUB is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_IIO_ST_LSM6DSX is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_IIO_TRIGGERED_EVENT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_IKCONFIG_PROC is not set +# CONFIG_IKHEADERS is not set +# CONFIG_IMA is not set +# CONFIG_IMAGE_CMDLINE_HACK is not set +# CONFIG_IMGPDC_WDT is not set +# CONFIG_IMG_MDC_DMA is not set +# CONFIG_IMX7D_ADC is not set +# CONFIG_IMX_IPUV3_CORE is not set +# CONFIG_IMX_THERMAL is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_INDIRECT_PIO is not set +CONFIG_INET=y +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_ESPINTCP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_DIAG is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_ESPINTCP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_TCP_DIAG is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INFINIBAND is not set +# CONFIG_INFTL is not set +# CONFIG_INGENIC_ADC is not set +# CONFIG_INGENIC_CGU_JZ4725B is not set +# CONFIG_INGENIC_CGU_JZ4740 is not set +# CONFIG_INGENIC_CGU_JZ4770 is not set +# CONFIG_INGENIC_CGU_JZ4780 is not set +# CONFIG_INGENIC_CGU_X1000 is not set +# CONFIG_INGENIC_CGU_X1830 is not set +# CONFIG_INGENIC_OST is not set +# CONFIG_INGENIC_SYSOST is not set +# CONFIG_INGENIC_TCU_CLK is not set +# CONFIG_INGENIC_TCU_IRQ is not set +# CONFIG_INGENIC_TIMER is not set +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +CONFIG_INIT_STACK_NONE=y +CONFIG_INOTIFY_USER=y +# CONFIG_INPUT is not set +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_AXP20X_PEK is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_VIBRA is not set +# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_IQS269A is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_LEDS is not set +# CONFIG_INPUT_MATRIXKMAP is not set +# CONFIG_INPUT_MAX8997_HAPTIC is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_MSM_VIBRATOR is not set +# CONFIG_INPUT_PALMAS_PWRBUTTON is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_TPS65218_PWRBUTTON is not set +# CONFIG_INPUT_TWL4030_PWRBUTTON is not set +# CONFIG_INPUT_TWL4030_VIBRA is not set +# CONFIG_INPUT_TWL6040_VIBRA is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INT340X_THERMAL is not set +# CONFIG_INTEGRITY is not set +# CONFIG_INTEGRITY_AUDIT is not set +# CONFIG_INTEGRITY_SIGNATURE is not set +# CONFIG_INTEL_ATOMISP2_LED is not set +# CONFIG_INTEL_ATOMISP2_PM is not set +# CONFIG_INTEL_CHT_INT33FE is not set +# CONFIG_INTEL_HID_EVENT is not set +# CONFIG_INTEL_IDLE is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_INTEL_INT0002_VGPIO is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_INTEL_ISH_HID is not set +# CONFIG_INTEL_MEI is not set +# CONFIG_INTEL_MEI_ME is not set +# CONFIG_INTEL_MEI_TXE is not set +# CONFIG_INTEL_MIC_CARD is not set +# CONFIG_INTEL_MIC_HOST is not set +# CONFIG_INTEL_MID_PTI is not set +# CONFIG_INTEL_OAKTRAIL is not set +# CONFIG_INTEL_PMC_CORE is not set +# CONFIG_INTEL_PUNIT_IPC is not set +# CONFIG_INTEL_RST is not set +# CONFIG_INTEL_SMARTCONNECT is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set +# CONFIG_INTEL_SOC_PMIC_CHTWC is not set +# CONFIG_INTEL_TH is not set +# CONFIG_INTEL_VBTN is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_INTERCONNECT is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_INV_ICM42600_I2C is not set +# CONFIG_INV_ICM42600_SPI is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_IIO is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_IONIC is not set +# CONFIG_IOSCHED_BFQ is not set +CONFIG_IO_STRICT_DEVMEM=y +# CONFIG_IO_URING is not set +CONFIG_IO_WQ=y +# CONFIG_IP17XX_PHY is not set +# CONFIG_IP6_NF_FILTER is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_NAT is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_MASQUERADE is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +# CONFIG_IPACK_BUS is not set +# CONFIG_IPC_NS is not set +# CONFIG_IPMB_DEVICE_INTERFACE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPV6 is not set +# CONFIG_IPV6_FOU is not set +# CONFIG_IPV6_FOU_TUNNEL is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_ROUTE_INFO is not set +# CONFIG_IPV6_RPL_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_SIT_6RD is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_VTI is not set +# CONFIG_IPVLAN is not set +# CONFIG_IPVTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2200 is not set +# CONFIG_IPW2200_DEBUG is not set +CONFIG_IPW2200_MONITOR=y +# CONFIG_IPW2200_PROMISCUOUS is not set +# CONFIG_IPW2200_QOS is not set +# CONFIG_IPW2200_RADIOTAP is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_IPX is not set +CONFIG_IP_ADVANCED_ROUTER=y +# CONFIG_IP_DCCP is not set +# CONFIG_IP_FIB_TRIE_STATS is not set +# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_NF_ARPFILTER is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_ARP_MANGLE is not set +# CONFIG_IP_NF_FILTER is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_IP_PNP is not set +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_SCTP is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_SET_HASH_IPMAC is not set +# CONFIG_IP_VS is not set +# CONFIG_IP_VS_MH is not set +CONFIG_IP_VS_MH_TAB_INDEX=10 +# CONFIG_IRDA is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_IRQ_ALL_CPUS is not set +# CONFIG_IRQ_DOMAIN_DEBUG is not set +# CONFIG_IRQ_POLL is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +# CONFIG_IR_GPIO_CIR is not set +# CONFIG_IR_HIX5HD2 is not set +# CONFIG_IR_IGORPLUGUSB is not set +# CONFIG_IR_IGUANA is not set +# CONFIG_IR_IMG is not set +# CONFIG_IR_IMON is not set +# CONFIG_IR_IMON_RAW is not set +# CONFIG_IR_JVC_DECODER is not set +# CONFIG_IR_LIRC_CODEC is not set +# CONFIG_IR_MCEUSB is not set +# CONFIG_IR_NEC_DECODER is not set +# CONFIG_IR_RC5_DECODER is not set +# CONFIG_IR_RC6_DECODER is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_SONY_DECODER is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_TTUSBIR is not set +# CONFIG_ISA_BUS is not set +# CONFIG_ISA_BUS_API is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_ISCSI_TCP is not set +CONFIG_ISDN=y +# CONFIG_ISDN_AUDIO is not set +# CONFIG_ISDN_CAPI is not set +# CONFIG_ISDN_CAPI_CAPIDRV is not set +# CONFIG_ISDN_DIVERSION is not set +# CONFIG_ISDN_DRV_ACT2000 is not set +# CONFIG_ISDN_DRV_GIGASET is not set +# CONFIG_ISDN_DRV_HISAX is not set +# CONFIG_ISDN_DRV_ICN is not set +# CONFIG_ISDN_DRV_LOOP is not set +# CONFIG_ISDN_DRV_PCBIT is not set +# CONFIG_ISDN_DRV_SC is not set +# CONFIG_ISDN_I4L is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_ISL29125 is not set +# CONFIG_ISL29501 is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_ISS4xx is not set +# CONFIG_ITG3200 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_JAILHOUSE_GUEST is not set +# CONFIG_JBD2_DEBUG is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_POSIX_ACL is not set +# CONFIG_JFFS2_FS_SECURITY is not set +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_LZMA=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_ZLIB is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_JME is not set +CONFIG_JOLIET=y +# CONFIG_JSA1212 is not set +# CONFIG_JUMP_LABEL is not set +# CONFIG_JZ4740_WDT is not set +# CONFIG_JZ4770_PHY is not set +# CONFIG_KALLSYMS is not set +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +# CONFIG_KALLSYMS_UNCOMPRESSED is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_KASAN is not set +CONFIG_KASAN_STACK=1 +# CONFIG_KCMP is not set +# CONFIG_KCOV is not set +# CONFIG_KCSAN is not set +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_CAT is not set +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZ4 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_KERNEL_MODE_NEON=y +CONFIG_KERNEL_XZ=y +# CONFIG_KERNEL_ZSTD is not set +CONFIG_KERNFS=y +# CONFIG_KEXEC is not set +# CONFIG_KEXEC_FILE is not set +# CONFIG_KEXEC_SIG is not set +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +# CONFIG_KEYBOARD_APPLESPI is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_BCM is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_QT1050 is not set +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_KEYBOARD_SNVS_PWRKEY is not set +# CONFIG_KEYBOARD_STMPE is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_TEGRA is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYS is not set +# CONFIG_KEYS_REQUEST_CACHE is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_KMX61 is not set +# CONFIG_KPC2000 is not set +# CONFIG_KPROBES is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set +# CONFIG_KPROBE_EVENT_GEN_TEST is not set +# CONFIG_KS7010 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSM is not set +# CONFIG_KSZ884X_PCI is not set +# CONFIG_KUNIT is not set +CONFIG_KUSER_HELPERS=y +# CONFIG_KVM_AMD is not set +# CONFIG_KVM_AMD_SEV is not set +# CONFIG_KVM_GUEST is not set +# CONFIG_KVM_INTEL is not set +# CONFIG_KVM_WERROR is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_KXSD9 is not set +# CONFIG_L2TP is not set +# CONFIG_L2TP_ETH is not set +# CONFIG_L2TP_IP is not set +# CONFIG_L2TP_V3 is not set +# CONFIG_LAN743X is not set +# CONFIG_LANMEDIA is not set +# CONFIG_LANTIQ is not set +# CONFIG_LAPB is not set +# CONFIG_LASAT is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_LBDAF=y +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_OTM3225A is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LDISC_AUTOLOAD=y +# CONFIG_LDM_PARTITION is not set +CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y +# CONFIG_LEDS_AN30259A is not set +# CONFIG_LEDS_APU is not set +# CONFIG_LEDS_AW2013 is not set +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +CONFIG_LEDS_CLASS_MULTICOLOR=y +# CONFIG_LEDS_CR0014114 is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_EL15203000 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_INTEL_SS4200 is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3532 is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP50XX is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP55XX_COMMON is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_MLXCPLD is not set +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_NIC78BX is not set +# CONFIG_LEDS_NS2 is not set +# CONFIG_LEDS_OT200 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_SPI_BYTE is not set +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TI_LMU_COMMON is not set +# CONFIG_LEDS_TLC591XX is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +# CONFIG_LEDS_TRIGGER_AUDIO is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_CPU is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_NETDEV=y +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_LEDS_TRIGGER_PATTERN is not set +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TURRIS_OMNIA is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LED_TRIGGER_PHY is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_LGUEST is not set +# CONFIG_LIB80211 is not set +# CONFIG_LIB80211_CRYPT_CCMP is not set +# CONFIG_LIB80211_CRYPT_TKIP is not set +# CONFIG_LIB80211_CRYPT_WEP is not set +# CONFIG_LIB80211_DEBUG is not set +# CONFIG_LIBCRC32C is not set +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_LIBERTAS_USB is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_LIBIPW_DEBUG is not set +# CONFIG_LIBNVDIMM is not set +# CONFIG_LIDAR_LITE_V2 is not set +CONFIG_LINEAR_RANGES=y +# CONFIG_LIQUIDIO is not set +# CONFIG_LIQUIDIO_VF is not set +# CONFIG_LIS3L02DQ is not set +# CONFIG_LKDTM is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_LMP91000 is not set +# CONFIG_LNET is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_LOCKD is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_LOCKD_V4=y +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_LOCK_EVENT_COUNTS is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_LOGFS is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_LOGO is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +# CONFIG_LOONGSON_MC146818 is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_LP_CONSOLE is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" +CONFIG_LSM_MMAP_MIN_ADDR=65536 +# CONFIG_LTC1660 is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2496 is not set +# CONFIG_LTC2497 is not set +# CONFIG_LTC2632 is not set +# CONFIG_LTC2983 is not set +# CONFIG_LTE_GDM724X is not set +# CONFIG_LTPC is not set +# CONFIG_LTR501 is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_LV0104CS is not set +# CONFIG_LWTUNNEL is not set +# CONFIG_LXT_PHY is not set +# CONFIG_LZ4HC_COMPRESS is not set +# CONFIG_LZ4_COMPRESS is not set +# CONFIG_LZ4_DECOMPRESS is not set +CONFIG_LZMA_COMPRESS=y +CONFIG_LZMA_DECOMPRESS=y +# CONFIG_LZO_COMPRESS is not set +# CONFIG_LZO_DECOMPRESS is not set +# CONFIG_M62332 is not set +# CONFIG_MAC80211 is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_MACB is not set +# CONFIG_MACB_USE_HWSTAMP is not set +# CONFIG_MACH_ASM9260 is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_INGENIC is not set +# CONFIG_MACH_INGENIC_SOC is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_JZ4740 is not set +# CONFIG_MACH_LOONGSON2EF is not set +# CONFIG_MACH_LOONGSON32 is not set +# CONFIG_MACH_LOONGSON64 is not set +# CONFIG_MACH_PIC32 is not set +# CONFIG_MACH_PISTACHIO is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MACH_XILFPGA is not set +# CONFIG_MACINTOSH_DRIVERS is not set +# CONFIG_MACSEC is not set +# CONFIG_MACVLAN is not set +# CONFIG_MACVTAP is not set +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MAG3110 is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +# CONFIG_MAGIC_SYSRQ_SERIAL is not set +CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" +# CONFIG_MAILBOX is not set +# CONFIG_MANAGER_SBS is not set +# CONFIG_MANDATORY_FILE_LOCKING is not set +# CONFIG_MANGLE_BOOTARGS is not set +# CONFIG_MARVELL_10G_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1241 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set +# CONFIG_MAX31856 is not set +# CONFIG_MAX44000 is not set +# CONFIG_MAX44009 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5432 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX9611 is not set +# CONFIG_MAXIM_THERMOCOUPLE is not set +CONFIG_MAY_USE_DEVLINK=y +# CONFIG_MB1232 is not set +# CONFIG_MC3230 is not set +# CONFIG_MCB is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MCP3911 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP41010 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_MCPM is not set +# CONFIG_MD is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set +# CONFIG_MDIO_DEVICE is not set +# CONFIG_MDIO_DEVRES is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_IPQ4019 is not set +# CONFIG_MDIO_IPQ8064 is not set +# CONFIG_MDIO_MSCC_MIIM is not set +# CONFIG_MDIO_MVUSB is not set +# CONFIG_MDIO_OCTEON is not set +# CONFIG_MDIO_THUNDER is not set +# CONFIG_MDIO_XPCS is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_MEDIATEK_GE_PHY is not set +# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set +# CONFIG_MEDIA_ATTACH is not set +# CONFIG_MEDIA_CAMERA_SUPPORT is not set +# CONFIG_MEDIA_CEC_SUPPORT is not set +# CONFIG_MEDIA_CONTROLLER is not set +# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +# CONFIG_MEDIA_PLATFORM_SUPPORT is not set +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_RC_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +# CONFIG_MEDIA_SUPPORT is not set +# CONFIG_MEDIA_SUPPORT_FILTER is not set +# CONFIG_MEDIA_TEST_SUPPORT is not set +# CONFIG_MEDIA_TUNER_E4000 is not set +# CONFIG_MEDIA_TUNER_FC0011 is not set +# CONFIG_MEDIA_TUNER_FC0012 is not set +# CONFIG_MEDIA_TUNER_FC0013 is not set +# CONFIG_MEDIA_TUNER_FC2580 is not set +# CONFIG_MEDIA_TUNER_IT913X is not set +# CONFIG_MEDIA_TUNER_M88RS6000T is not set +# CONFIG_MEDIA_TUNER_MAX2165 is not set +# CONFIG_MEDIA_TUNER_MC44S803 is not set +# CONFIG_MEDIA_TUNER_MSI001 is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2063 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MXL301RF is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set +# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_R820T is not set +# CONFIG_MEDIA_TUNER_SI2157 is not set +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA18212 is not set +# CONFIG_MEDIA_TUNER_TDA18218 is not set +# CONFIG_MEDIA_TUNER_TDA18250 is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_TUA9001 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC4000 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_MELLANOX_PLATFORM is not set +CONFIG_MEMBARRIER=y +# CONFIG_MEMORY is not set +# CONFIG_MEMORY_FAILURE is not set +# CONFIG_MEMORY_HOTPLUG is not set +# CONFIG_MEMSTICK is not set +# CONFIG_MEMTEST is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_MESON_SM is not set +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_AC100 is not set +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_AXP20X is not set +# CONFIG_MFD_AXP20X_I2C is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_BD9571MWV is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_CPCAP is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_CS5535 is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_GATEWORKS_GSC is not set +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_MFD_INTEL_M10_BMC is not set +# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set +# CONFIG_MFD_IQS62X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_LOCHNAGAR is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_MADERA is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77620 is not set +# CONFIG_MFD_MAX77650 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MC13XXX is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_MFD_MP2629 is not set +# CONFIG_MFD_MT6360 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_OMAP_USB_HOST is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_PM8XXX is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +# CONFIG_MFD_ROHM_BD70528 is not set +# CONFIG_MFD_ROHM_BD71828 is not set +# CONFIG_MFD_ROHM_BD718XX is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SL28CPLD is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_MFD_STMFX is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_STPMIC1 is not set +# CONFIG_MFD_SYSCON is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TI_LP87565 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS68470 is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_MFD_TQMX86 is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MG_DISK is not set +# CONFIG_MHI_BUS is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_MICROCHIP_KSZ is not set +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROCHIP_PIT64B is not set +# CONFIG_MICROCHIP_T1_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_MIGRATION is not set +CONFIG_HARDEN_BRANCH_HISTORY=y +CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y +CONFIG_MII=y +# CONFIG_MIKROTIK is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_MINIX_FS is not set +# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_MIPS_ALCHEMY is not set +# CONFIG_MIPS_CDMM is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_FPU_EMULATOR is not set +# CONFIG_MIPS_FP_SUPPORT is not set +# CONFIG_MIPS_GENERIC is not set +# CONFIG_MIPS_GENERIC_KERNEL is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +# CONFIG_MIPS_PARAVIRT is not set +# CONFIG_MIPS_PLATFORM_DEVICES is not set +# CONFIG_MIPS_SEAD3 is not set +# CONFIG_MISC_ALCOR_PCI is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_MISC_RTSX_PCI is not set +# CONFIG_MISC_RTSX_USB is not set +# CONFIG_MISDN is not set +# CONFIG_MISDN_AVMFRITZ is not set +# CONFIG_MISDN_HFCPCI is not set +# CONFIG_MISDN_HFCUSB is not set +# CONFIG_MISDN_INFINEON is not set +# CONFIG_MISDN_NETJET is not set +# CONFIG_MISDN_SPEEDFAX is not set +# CONFIG_MISDN_W6692 is not set +# CONFIG_MKISS is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_MLXFW is not set +# CONFIG_MLXSW_CORE is not set +# CONFIG_MLX_CPLD_PLATFORM is not set +# CONFIG_MLX_PLATFORM is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MMC is not set +# CONFIG_MMC35240 is not set +# CONFIG_MMC_ARMMMCI is not set +# CONFIG_MMC_AU1X is not set +# CONFIG_MMC_BLOCK is not set +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_MMC_BLOCK_MINORS=8 +# CONFIG_MMC_CAVIUM_THUNDERX is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_CQHCI is not set +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_DW is not set +# CONFIG_MMC_HSQ is not set +# CONFIG_MMC_JZ4740 is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_MVSDIO is not set +# CONFIG_MMC_S3C is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SDHCI_ACPI is not set +# CONFIG_MMC_SDHCI_AM654 is not set +# CONFIG_MMC_SDHCI_BCM_KONA is not set +# CONFIG_MMC_SDHCI_CADENCE is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +# CONFIG_MMC_SDHCI_IPROC is not set +# CONFIG_MMC_SDHCI_MILBEAUT is not set +# CONFIG_MMC_SDHCI_MSM is not set +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_ASPEED is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set +# CONFIG_MMC_SDHCI_OF_ESDHC is not set +# CONFIG_MMC_SDHCI_OF_HLWD is not set +# CONFIG_MMC_SDHCI_OMAP is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_S3C is not set +# CONFIG_MMC_SDHCI_XENON is not set +# CONFIG_MMC_SDRICOH_CS is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MMC_STM32_SDMMC is not set +# CONFIG_MMC_TEST is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_USDHI6ROL0 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_VIA_SDMMC is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMIOTRACE is not set +CONFIG_MMU=y +CONFIG_MMU_GATHER_RCU_TABLE_FREE=y +CONFIG_MMU_GATHER_TABLE_FREE=y +CONFIG_MODULES=y +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_MODULE_STRIPPED=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MOST is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_PS2_FOCALTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_MOXTET is not set +# CONFIG_MPL115 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MPLS is not set +# CONFIG_MPTCP is not set +# CONFIG_MPU3050_I2C is not set +# CONFIG_MQ_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_KYBER is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_MSCC_OCELOT_SWITCH is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_MSI_LAPTOP is not set +# CONFIG_MST_IRQ is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_HYPERBUS is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_LATCH_ADDR is not set +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_LPDDR2_NVM is not set +# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_MT81xx_NOR is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_MYLOADER_PARTS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_AMS_DELTA is not set +# CONFIG_MTD_NAND_AR934X is not set +# CONFIG_MTD_NAND_AR934X_HW_ECC is not set +# CONFIG_MTD_NAND_ARASAN is not set +# CONFIG_MTD_NAND_ATMEL is not set +# CONFIG_MTD_NAND_AU1550 is not set +# CONFIG_MTD_NAND_BCH is not set +# CONFIG_MTD_NAND_BF5XX is not set +# CONFIG_MTD_NAND_BRCMNAND is not set +# CONFIG_MTD_NAND_CADENCE is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_CM_X270 is not set +# CONFIG_MTD_NAND_CS553X is not set +# CONFIG_MTD_NAND_DAVINCI is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_DENALI_DT is not set +# CONFIG_MTD_NAND_DENALI_PCI is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018 +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_ECC is not set +# CONFIG_MTD_NAND_ECC_BCH is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_ECC_SW_BCH is not set +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_IFC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set +# CONFIG_MTD_NAND_FSMC is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_GPMI_NAND is not set +# CONFIG_MTD_NAND_HISI504 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_JZ4740 is not set +# CONFIG_MTD_NAND_MPC5121_NFC is not set +# CONFIG_MTD_NAND_MTK is not set +# CONFIG_MTD_NAND_MTK_BMT is not set +# CONFIG_MTD_NAND_MXC is not set +# CONFIG_MTD_NAND_MXIC is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_NDFC is not set +# CONFIG_MTD_NAND_NUC900 is not set +# CONFIG_MTD_NAND_OMAP2 is not set +# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set +# CONFIG_MTD_NAND_ORION is not set +# CONFIG_MTD_NAND_PASEMI is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_PXA3xx is not set +# CONFIG_MTD_NAND_RB4XX is not set +# CONFIG_MTD_NAND_RB750 is not set +# CONFIG_MTD_NAND_RB91X is not set +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_S3C2410 is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_SH_FLCTL is not set +# CONFIG_MTD_NAND_SOCRATES is not set +# CONFIG_MTD_NAND_TMIO is not set +# CONFIG_MTD_NAND_TXX9NDFMC is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_PARSER_TRX is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PCMCIA is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PHYSMAP_GEMINI is not set +# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set +# CONFIG_MTD_PHYSMAP_IXP4XX is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set +# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set +# CONFIG_MTD_PHYSMAP_VERSATILE is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_RAW_NAND is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROOTFS_ROOT_DEV=y +# CONFIG_MTD_ROUTERBOOT_PARTS is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_MTD_SPI_NAND is not set +# CONFIG_MTD_SPI_NOR is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096 +# CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set +CONFIG_MTD_SPLIT=y +# CONFIG_MTD_SPLIT_BCM63XX_FW is not set +# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set +# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set +# CONFIG_MTD_SPLIT_ELF_FW is not set +# CONFIG_MTD_SPLIT_EVA_FW is not set +# CONFIG_MTD_SPLIT_FIRMWARE is not set +CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware" +# CONFIG_MTD_SPLIT_FIT_FW is not set +# CONFIG_MTD_SPLIT_JIMAGE_FW is not set +# CONFIG_MTD_SPLIT_LZMA_FW is not set +# CONFIG_MTD_SPLIT_MINOR_FW is not set +# CONFIG_MTD_SPLIT_SEAMA_FW is not set +CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y +CONFIG_MTD_SPLIT_SUPPORT=y +# CONFIG_MTD_SPLIT_TPLINK_FW is not set +# CONFIG_MTD_SPLIT_TRX_FW is not set +# CONFIG_MTD_SPLIT_UIMAGE_FW is not set +# CONFIG_MTD_SPLIT_WRGG_FW is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_UBI is not set +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UIMAGE_SPLIT is not set +# CONFIG_MTD_VIRT_CONCAT is not set +# CONFIG_MTK_MMC is not set +# CONFIG_MTK_MMSYS is not set +# CONFIG_MULTIPLEXER is not set +CONFIG_MULTIUSER=y +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_MUX_ADG792A is not set +# CONFIG_MUX_ADGS1408 is not set +# CONFIG_MUX_GPIO is not set +# CONFIG_MUX_MMIO is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_MVMDIO is not set +# CONFIG_MVNETA_BM is not set +# CONFIG_MVSW61XX_PHY is not set +# CONFIG_MV_XOR_V2 is not set +# CONFIG_MWAVE is not set +# CONFIG_MWL8K is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NAMESPACES is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_NATSEMI is not set +# CONFIG_NAU7802 is not set +# CONFIG_NBPFAXI_DMA is not set +# CONFIG_NCP_FS is not set +# CONFIG_NE2000 is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NEC_MARKEINS is not set +CONFIG_NET=y +# CONFIG_NETCONSOLE is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVSIM is not set +# CONFIG_NETFILTER is not set +# CONFIG_NETFILTER_ADVANCED is not set +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_INGRESS is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NETFILTER_NETLINK_OSF is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_LOG is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_NETLINK_MMAP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETROM is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NET_9P is not set +# CONFIG_NET_ACT_BPF is not set +# CONFIG_NET_ACT_CSUM is not set +# CONFIG_NET_ACT_CT is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_GATE is not set +# CONFIG_NET_ACT_IFE is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_MPLS is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_SAMPLE is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +# CONFIG_NET_ACT_SKBMOD is not set +# CONFIG_NET_ACT_TUNNEL_KEY is not set +# CONFIG_NET_ACT_VLAN is not set +CONFIG_NET_CADENCE=y +# CONFIG_NET_CALXEDA_XGMAC is not set +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_BPF is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_CLS_FLOWER is not set +# CONFIG_NET_CLS_FW is not set +CONFIG_NET_CLS_IND=y +# CONFIG_NET_CLS_MATCHALL is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_U32 is not set +CONFIG_NET_CORE=y +# CONFIG_NET_DEVLINK is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_NET_DSA is not set +# CONFIG_NET_DSA_AR9331 is not set +# CONFIG_NET_DSA_BCM_SF2 is not set +# CONFIG_NET_DSA_LANTIQ_GSWIP is not set +# CONFIG_NET_DSA_LEGACY is not set +# CONFIG_NET_DSA_LOOP is not set +# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set +# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set +# CONFIG_NET_DSA_MSCC_FELIX is not set +# CONFIG_NET_DSA_MSCC_SEVILLE is not set +# CONFIG_NET_DSA_MT7530 is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6171 is not set +# CONFIG_NET_DSA_MV88E6352 is not set +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6XXX_PTP is not set +# CONFIG_NET_DSA_QCA8K is not set +# CONFIG_NET_DSA_REALTEK_SMI is not set +# CONFIG_NET_DSA_SJA1105 is not set +# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set +# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set +# CONFIG_NET_DSA_TAG_8021Q is not set +# CONFIG_NET_DSA_TAG_AR9331 is not set +# CONFIG_NET_DSA_TAG_BRCM is not set +# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set +# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +# CONFIG_NET_DSA_TAG_GSWIP is not set +# CONFIG_NET_DSA_TAG_KSZ is not set +# CONFIG_NET_DSA_TAG_LAN9303 is not set +# CONFIG_NET_DSA_TAG_MTK is not set +# CONFIG_NET_DSA_TAG_OCELOT is not set +# CONFIG_NET_DSA_TAG_QCA is not set +# CONFIG_NET_DSA_TAG_RTL4_A is not set +# CONFIG_NET_DSA_TAG_SJA1105 is not set +# CONFIG_NET_DSA_TAG_TRAILER is not set +# CONFIG_NET_DSA_VITESSE_VSC73XX is not set +# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set +# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_EMATCH_CANID is not set +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_IPT is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_NBYTE is not set +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_TEXT is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_FAILOVER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_NET_IFE is not set +# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_NET_IPGRE_DEMUX is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_IP_TUNNEL is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_KEY_MIGRATE is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_NET_MEDIATEK_STAR_EMAC is not set +# CONFIG_NET_MPLS_GSO is not set +# CONFIG_NET_NCSI is not set +# CONFIG_NET_NSH is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_NET_PTP_CLASSIFY is not set +CONFIG_NET_RX_BUSY_POLL=y +# CONFIG_NET_SB1000 is not set +CONFIG_NET_SCHED=y +# CONFIG_NET_SCH_ATM is not set +# CONFIG_NET_SCH_CAKE is not set +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_CBS is not set +# CONFIG_NET_SCH_CHOKE is not set +# CONFIG_NET_SCH_CODEL is not set +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ETF is not set +# CONFIG_NET_SCH_ETS is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_SCH_FQ is not set +CONFIG_NET_SCH_FQ_CODEL=y +# CONFIG_NET_SCH_FQ_PIE is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HHF is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_MQPRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_PIE is not set +# CONFIG_NET_SCH_PLUG is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_QFQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFB is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_SKBPRIO is not set +# CONFIG_NET_SCH_TAPRIO is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCTPPROBE is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_TC_SKB_EXT is not set +# CONFIG_NET_TEAM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_NET_UDP_TUNNEL is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_NET_VENDOR_8390=y +CONFIG_NET_VENDOR_ADAPTEC=y +CONFIG_NET_VENDOR_AGERE=y +CONFIG_NET_VENDOR_ALACRITECH=y +CONFIG_NET_VENDOR_ALTEON=y +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_ATHEROS=y +CONFIG_NET_VENDOR_AURORA=y +CONFIG_NET_VENDOR_BROADCOM=y +CONFIG_NET_VENDOR_BROCADE=y +CONFIG_NET_VENDOR_CADENCE=y +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_NET_VENDOR_CHELSIO=y +CONFIG_NET_VENDOR_CIRRUS=y +CONFIG_NET_VENDOR_CISCO=y +CONFIG_NET_VENDOR_CORTINA=y +CONFIG_NET_VENDOR_DEC=y +CONFIG_NET_VENDOR_DLINK=y +CONFIG_NET_VENDOR_EMULEX=y +CONFIG_NET_VENDOR_EXAR=y +CONFIG_NET_VENDOR_EZCHIP=y +CONFIG_NET_VENDOR_FARADAY=y +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_NET_VENDOR_FUJITSU=y +CONFIG_NET_VENDOR_GOOGLE=y +CONFIG_NET_VENDOR_HISILICON=y +CONFIG_NET_VENDOR_HP=y +CONFIG_NET_VENDOR_HUAWEI=y +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_IBM=y +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_NET_VENDOR_MICREL=y +CONFIG_NET_VENDOR_MICROCHIP=y +CONFIG_NET_VENDOR_MICROSEMI=y +CONFIG_NET_VENDOR_MYRI=y +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_NETERION=y +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NET_VENDOR_NI=y +CONFIG_NET_VENDOR_NVIDIA=y +CONFIG_NET_VENDOR_OKI=y +CONFIG_NET_VENDOR_PACKET_ENGINES=y +CONFIG_NET_VENDOR_PENSANDO=y +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_NET_VENDOR_QUALCOMM=y +CONFIG_NET_VENDOR_RDC=y +CONFIG_NET_VENDOR_REALTEK=y +CONFIG_NET_VENDOR_RENESAS=y +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +CONFIG_NET_VENDOR_SIS=y +CONFIG_NET_VENDOR_SMSC=y +CONFIG_NET_VENDOR_SOCIONEXT=y +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_NET_VENDOR_SUN=y +CONFIG_NET_VENDOR_SYNOPSYS=y +CONFIG_NET_VENDOR_TEHUTI=y +CONFIG_NET_VENDOR_TI=y +CONFIG_NET_VENDOR_TOSHIBA=y +CONFIG_NET_VENDOR_VIA=y +CONFIG_NET_VENDOR_WIZNET=y +CONFIG_NET_VENDOR_XILINX=y +CONFIG_NET_VENDOR_XIRCOM=y +# CONFIG_NET_VRF is not set +# CONFIG_NET_XGENE is not set +CONFIG_NEW_LEDS=y +# CONFIG_NFC is not set +# CONFIG_NFP is not set +# CONFIG_NFSD is not set +# CONFIG_NFSD_V2_ACL is not set +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +# CONFIG_NFS_ACL_SUPPORT is not set +CONFIG_NFS_COMMON=y +# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set +# CONFIG_NFS_FS is not set +# CONFIG_NFS_FSCACHE is not set +# CONFIG_NFS_SWAP is not set +# CONFIG_NFS_V2 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_V4_1 is not set +# CONFIG_NFTL is not set +# CONFIG_NFT_BRIDGE_META is not set +# CONFIG_NFT_BRIDGE_REJECT is not set +# CONFIG_NFT_CONNLIMIT is not set +# CONFIG_NFT_DUP_IPV4 is not set +# CONFIG_NFT_DUP_IPV6 is not set +# CONFIG_NFT_FIB_IPV4 is not set +# CONFIG_NFT_FIB_IPV6 is not set +# CONFIG_NFT_FIB_NETDEV is not set +# CONFIG_NFT_FLOW_OFFLOAD is not set +# CONFIG_NFT_OBJREF is not set +# CONFIG_NFT_OSF is not set +# CONFIG_NFT_RT is not set +# CONFIG_NFT_SET_BITMAP is not set +# CONFIG_NFT_SOCKET is not set +# CONFIG_NFT_SYNPROXY is not set +# CONFIG_NFT_TPROXY is not set +# CONFIG_NFT_TUNNEL is not set +# CONFIG_NFT_XFRM is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_BRIDGE is not set +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_LABELS is not set +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +CONFIG_NF_CONNTRACK_PROCFS=y +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SECMARK is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CONNTRACK_ZONES is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_HELPER is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_GRE is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_DUP_IPV6 is not set +# CONFIG_NF_FLOW_TABLE is not set +# CONFIG_NF_LOG_ARP is not set +# CONFIG_NF_LOG_BRIDGE is not set +# CONFIG_NF_LOG_IPV4 is not set +# CONFIG_NF_LOG_NETDEV is not set +# CONFIG_NF_NAT is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_IPV6 is not set +# CONFIG_NF_NAT_IRC is not set +CONFIG_NF_NAT_MASQUERADE_IPV4=y +CONFIG_NF_NAT_MASQUERADE_IPV6=y +# CONFIG_NF_NAT_NEEDED is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_PROTO_GRE is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_REJECT_IPV4 is not set +# CONFIG_NF_REJECT_IPV6 is not set +# CONFIG_NF_SOCKET_IPV4 is not set +# CONFIG_NF_SOCKET_IPV6 is not set +# CONFIG_NF_TABLES is not set +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_IPV4=y +CONFIG_NF_TABLES_IPV6=y +CONFIG_NF_TABLES_NETDEV=y +# CONFIG_NF_TABLES_SET is not set +# CONFIG_NF_TPROXY_IPV4 is not set +# CONFIG_NF_TPROXY_IPV6 is not set +# CONFIG_NI65 is not set +# CONFIG_NI903X_WDT is not set +# CONFIG_NIC7018_WDT is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NIU is not set +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set +CONFIG_NLATTR=y +# CONFIG_NLMON is not set +# CONFIG_NLM_XLP_BOARD is not set +# CONFIG_NLM_XLR_BOARD is not set +# CONFIG_NLS is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +CONFIG_NMI_LOG_BUF_SHIFT=13 +# CONFIG_NOA1305 is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set +# CONFIG_NOZOMI is not set +# CONFIG_NO_BOOTMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ_IDLE is not set +# CONFIG_NS83820 is not set +# CONFIG_NTB is not set +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_NTP_PPS is not set +# CONFIG_NULL_TTY is not set +# CONFIG_NUMA is not set +# CONFIG_NVM is not set +# CONFIG_NVMEM is not set +# CONFIG_NVMEM_BCM_OCOTP is not set +# CONFIG_NVMEM_IMX_OCOTP is not set +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_NVMEM_SYSFS is not set +# CONFIG_NVME_FC is not set +# CONFIG_NVME_TARGET is not set +# CONFIG_NVME_TCP is not set +# CONFIG_NVRAM is not set +# CONFIG_NV_TCO is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_NXP_TJA11XX_PHY is not set +# CONFIG_N_GSM is not set +# CONFIG_OABI_COMPAT is not set +# CONFIG_OBS600 is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_OCTEONTX2_AF is not set +# CONFIG_OCTEONTX2_PF is not set +# CONFIG_OF_OVERLAY is not set +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_UNITTEST is not set +# CONFIG_OID_REGISTRY is not set +# CONFIG_OMAP2_DSS_DEBUG is not set +# CONFIG_OMAP2_DSS_DEBUGFS is not set +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP_OCP2SCP is not set +# CONFIG_OMAP_USB2 is not set +# CONFIG_OMFS_FS is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_OPROFILE is not set +# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set +# CONFIG_OPT3001 is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ORION_WATCHDOG is not set +# CONFIG_OSF_PARTITION is not set +CONFIG_OVERLAY_FS=y +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_METACOPY is not set +CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +CONFIG_OVERLAY_FS_XINO_AUTO=y +# CONFIG_OWL_LOADER is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PA12203001 is not set +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +# CONFIG_PACKING is not set +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_PAGE_OWNER is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_PAGE_REPORTING is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PALMAS_GPADC is not set +# CONFIG_PANASONIC_LAPTOP is not set +# CONFIG_PANEL is not set +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_ON_OOPS_VALUE=1 +CONFIG_PANIC_TIMEOUT=1 +# CONFIG_PANTHERLORD_FF is not set +# CONFIG_PARAVIRT is not set +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +# CONFIG_PARPORT is not set +# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_PC is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARASAN_CF is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IMX is not set +# CONFIG_PATA_ISAPNP is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OCTEON_CF is not set +# CONFIG_PATA_OF_PLATFORM is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_WINBOND_VLB is not set +# CONFIG_PC104 is not set +# CONFIG_PC300TOO is not set +# CONFIG_PCCARD is not set +# CONFIG_PCH_DMA is not set +# CONFIG_PCH_GBE is not set +# CONFIG_PCH_PHUB is not set +# CONFIG_PCI is not set +# CONFIG_PCI200SYN is not set +# CONFIG_PCIEAER is not set +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIEASPM is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIE_AL is not set +# CONFIG_PCIE_ALTERA is not set +# CONFIG_PCIE_ARMADA_8K is not set +CONFIG_PCIE_BUS_DEFAULT=y +# CONFIG_PCIE_BUS_PEER2PEER is not set +# CONFIG_PCIE_BUS_PERFORMANCE is not set +# CONFIG_PCIE_BUS_SAFE is not set +# CONFIG_PCIE_BUS_TUNE_OFF is not set +# CONFIG_PCIE_BW is not set +# CONFIG_PCIE_CADENCE_HOST is not set +# CONFIG_PCIE_CADENCE_PLAT_HOST is not set +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_DW_PLAT is not set +# CONFIG_PCIE_DW_PLAT_HOST is not set +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIE_IPROC is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set +# CONFIG_PCIE_PTM is not set +# CONFIG_PCIE_XILINX is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PCI_ATMEL is not set +# CONFIG_PCI_CNB20LE_QUIRK is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set +# CONFIG_PCI_ENDPOINT is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +# CONFIG_PCI_FTPCI100 is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_PCI_HISI is not set +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_J721E_HOST is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCI_MESON is not set +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_PASID is not set +# CONFIG_PCI_PF_STUB is not set +# CONFIG_PCI_PRI is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_SW_SWITCHTEC is not set +CONFIG_PCI_SYSCALL=y +# CONFIG_PCI_V3_SEMI is not set +# CONFIG_PCI_XGENE is not set +# CONFIG_PCMCIA is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_ATMEL is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_HERMES is not set +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_PCMCIA_SYM53C500 is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_XIRCOM is not set +# CONFIG_PCNET32 is not set +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PCS_XPCS is not set +# CONFIG_PD6729 is not set +# CONFIG_PDA_POWER is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_PERCPU_STATS is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_EVENTS_AMD_POWER is not set +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_PHANTOM is not set +# CONFIG_PHONET is not set +# CONFIG_PHYLIB is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_PHY_CADENCE_DP is not set +# CONFIG_PHY_CADENCE_DPHY is not set +# CONFIG_PHY_CADENCE_SALVO is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +# CONFIG_PHY_CADENCE_TORRENT is not set +# CONFIG_PHY_CPCAP_USB is not set +# CONFIG_PHY_EXYNOS_DP_VIDEO is not set +# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set +# CONFIG_PHY_FSL_IMX8MQ_USB is not set +# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set +# CONFIG_PHY_MAPPHONE_MDM6600 is not set +# CONFIG_PHY_MIXEL_MIPI_DPHY is not set +# CONFIG_PHY_MTK_HDMI is not set +# CONFIG_PHY_OCELOT_SERDES is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_QCOM_DWC3 is not set +# CONFIG_PHY_QCOM_USB_HS is not set +# CONFIG_PHY_QCOM_USB_HSIC is not set +# CONFIG_PHY_SAMSUNG_USB2 is not set +# CONFIG_PHY_TUSB1210 is not set +# CONFIG_PHY_XGENE is not set +# CONFIG_PI433 is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_PID_NS is not set +CONFIG_PINCONF=y +# CONFIG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +# CONFIG_PINCTRL_AXP209 is not set +# CONFIG_PINCTRL_CEDARFORK is not set +# CONFIG_PINCTRL_EXYNOS is not set +# CONFIG_PINCTRL_EXYNOS5440 is not set +# CONFIG_PINCTRL_ICELAKE is not set +# CONFIG_PINCTRL_INGENIC is not set +# CONFIG_PINCTRL_MCP23S08 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +# CONFIG_PINCTRL_MT6779 is not set +# CONFIG_PINCTRL_MT8167 is not set +# CONFIG_PINCTRL_MT8192 is not set +# CONFIG_PINCTRL_MTK_V2 is not set +# CONFIG_PINCTRL_OCELOT is not set +CONFIG_PINCTRL_SINGLE=y +# CONFIG_PINCTRL_STMFX is not set +# CONFIG_PINCTRL_SX150X is not set +# CONFIG_PING is not set +CONFIG_PINMUX=y +# CONFIG_PKCS7_MESSAGE_PARSER is not set +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +# CONFIG_PL320_MBOX is not set +# CONFIG_PL330_DMA is not set +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_PLIP is not set +# CONFIG_PLX_DMA is not set +# CONFIG_PLX_HERMES is not set +# CONFIG_PM is not set +# CONFIG_PMBUS is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMS7003 is not set +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_DEVFREQ is not set +# CONFIG_PM_WAKELOCKS is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_TIMERS=y +# CONFIG_POWERCAP is not set +# CONFIG_POWER_AVS is not set +# CONFIG_POWER_RESET is not set +# CONFIG_POWER_RESET_BRCMKONA is not set +# CONFIG_POWER_RESET_BRCMSTB is not set +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_LINKSTATION is not set +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set +# CONFIG_POWER_RESET_QNAP is not set +# CONFIG_POWER_RESET_RESTART is not set +# CONFIG_POWER_RESET_SYSCON is not set +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_POWER_RESET_VERSATILE is not set +# CONFIG_POWER_RESET_XGENE is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_POWER_SUPPLY_HWMON is not set +# CONFIG_PPC4xx_GPIO is not set +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_DISABLE_WERROR is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set +# CONFIG_PPC_QUEUED_SPINLOCKS is not set +# CONFIG_PPP is not set +# CONFIG_PPPOATM is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_FILTER=y +# CONFIG_PPP_MPPE is not set +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPS is not set +# CONFIG_PPS_CLIENT_GPIO is not set +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_PARPORT is not set +# CONFIG_PPS_DEBUG is not set +# CONFIG_PPTP is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_PREEMPTIRQ_EVENTS is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PRESTERA is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_PRIME_NUMBERS is not set +CONFIG_PRINTK=y +# CONFIG_PRINTK_CALLER is not set +CONFIG_PRINTK_NMI=y +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +# CONFIG_PRINTK_TIME is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_PRISM2_USB is not set +# CONFIG_PRISM54 is not set +# CONFIG_PROC_CHILDREN is not set +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_PROC_STRIPPED is not set +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILING is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_PROVE_RAW_LOCK_NESTING is not set +# CONFIG_PROVE_RCU is not set +# CONFIG_PROVE_RCU_LIST is not set +# CONFIG_PROVE_RCU_REPEATEDLY is not set +# CONFIG_PSAMPLE is not set +# CONFIG_PSB6970_PHY is not set +# CONFIG_PSI is not set +# CONFIG_PSTORE is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_COMPRESS is not set +# CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_DEFLATE_COMPRESS is not set +# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_RAM is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +# CONFIG_PTDUMP_DEBUGFS is not set +# CONFIG_PTP_1588_CLOCK is not set +# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set +# CONFIG_PTP_1588_CLOCK_IDTCM is not set +# CONFIG_PTP_1588_CLOCK_IXP46X is not set +# CONFIG_PTP_1588_CLOCK_KVM is not set +# CONFIG_PTP_1588_CLOCK_PCH is not set +# CONFIG_PTP_1588_CLOCK_VMW is not set +# CONFIG_PUBLIC_KEY_ALGO_RSA is not set +# CONFIG_PVPANIC is not set +# CONFIG_PWM is not set +# CONFIG_PWM_DEBUG is not set +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_JZ4740 is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWRSEQ_EMMC=y +# CONFIG_PWRSEQ_SD8787 is not set +CONFIG_PWRSEQ_SIMPLE=y +# CONFIG_QCA7000 is not set +# CONFIG_QCA7000_SPI is not set +# CONFIG_QCA7000_UART is not set +# CONFIG_QCOM_EMAC is not set +# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set +# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set +# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set +# CONFIG_QCOM_HIDMA is not set +# CONFIG_QCOM_HIDMA_MGMT is not set +# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QED is not set +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_QORIQ_THERMAL is not set +# CONFIG_QRTR is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_QUEUED_LOCK_STAT is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_QUOTA is not set +# CONFIG_QUOTACTL is not set +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_R3964 is not set +# CONFIG_R6040 is not set +# CONFIG_R8169 is not set +# CONFIG_R8188EU is not set +# CONFIG_R8712U is not set +# CONFIG_R8723AU is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_RAID6_PQ_BENCHMARK is not set +# CONFIG_RAID_ATTRS is not set +# CONFIG_RALINK is not set +# CONFIG_RANDOM32_SELFTEST is not set +# CONFIG_RANDOMIZE_BASE is not set +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set +# CONFIG_RANDOM_TRUST_CPU is not set +# CONFIG_RAPIDIO is not set +# CONFIG_RAS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_RCU_BOOST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +# CONFIG_RCU_EXPERT is not set +CONFIG_RCU_KTHREAD_PRIO=0 +CONFIG_RCU_NEED_SEGCBLIST=y +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_REF_SCALE_TEST is not set +# CONFIG_RCU_SCALE_TEST is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_STRICT_GRACE_PERIOD is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3 +# CONFIG_RCU_TRACE is not set +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_RC_CORE is not set +# CONFIG_RC_DECODERS is not set +# CONFIG_RC_LOOPBACK is not set +# CONFIG_RC_MAP is not set +# CONFIG_RDS is not set +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_GZIP is not set +# CONFIG_RD_LZ4 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_ZSTD is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_REDWOOD is not set +# CONFIG_REED_SOLOMON is not set +# CONFIG_REED_SOLOMON_DEC8 is not set +# CONFIG_REED_SOLOMON_ENC8 is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_REGMAP is not set +# CONFIG_REGMAP_I2C is not set +# CONFIG_REGMAP_MMIO is not set +# CONFIG_REGMAP_SPI is not set +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_88PG86X is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FAN53555 is not set +# CONFIG_REGULATOR_FAN53880 is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_GPIO is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX77620 is not set +# CONFIG_REGULATOR_MAX77826 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MCP16502 is not set +# CONFIG_REGULATOR_MP5416 is not set +# CONFIG_REGULATOR_MP8859 is not set +# CONFIG_REGULATOR_MP886X is not set +# CONFIG_REGULATOR_MPQ7920 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PCA9450 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +# CONFIG_REGULATOR_PWM is not set +# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set +# CONFIG_REGULATOR_RT4801 is not set +# CONFIG_REGULATOR_RTMV20 is not set +# CONFIG_REGULATOR_SLG51000 is not set +# CONFIG_REGULATOR_SY8106A is not set +# CONFIG_REGULATOR_SY8824X is not set +# CONFIG_REGULATOR_SY8827N is not set +# CONFIG_REGULATOR_TI_ABB is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS65132 is not set +# CONFIG_REGULATOR_TPS6524X is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_VCTRL is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_RELAY is not set +# CONFIG_RELOCATABLE is not set +# CONFIG_REMOTEPROC is not set +# CONFIG_RENESAS_PHY is not set +# CONFIG_RESET_ATH79 is not set +# CONFIG_RESET_BERLIN is not set +# CONFIG_RESET_BRCMSTB_RESCAL is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_RESET_IMX7 is not set +# CONFIG_RESET_INTEL_GW is not set +# CONFIG_RESET_LANTIQ is not set +# CONFIG_RESET_LPC18XX is not set +# CONFIG_RESET_MESON is not set +# CONFIG_RESET_PISTACHIO is not set +# CONFIG_RESET_SOCFPGA is not set +# CONFIG_RESET_STM32 is not set +# CONFIG_RESET_SUNXI is not set +# CONFIG_RESET_TEGRA_BPMP is not set +# CONFIG_RESET_TI_SYSCON is not set +# CONFIG_RESET_ZYNQ is not set +# CONFIG_RFD77402 is not set +# CONFIG_RFD_FTL is not set +CONFIG_RFKILL=y +# CONFIG_RFKILL_FULL is not set +# CONFIG_RFKILL_GPIO is not set +# CONFIG_RFKILL_INPUT is not set +# CONFIG_RFKILL_LEDS is not set +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_RMI4_CORE is not set +# CONFIG_RMNET is not set +# CONFIG_ROCKCHIP_PHY is not set +# CONFIG_ROCKER is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_ROSE is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +# CONFIG_RPMSG_VIRTIO is not set +# CONFIG_RPR0521 is not set +# CONFIG_RSEQ is not set +# CONFIG_RT2X00 is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_RTC_DEBUG is not set +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABEOZ9 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_AU1XXX is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_CADENCE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1307_CENTURY is not set +# CONFIG_RTC_DRV_DS1307_HWMON is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +# CONFIG_RTC_DRV_DS3232 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_EP93XX is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_FTRTC010 is not set +# CONFIG_RTC_DRV_GENERIC is not set +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12026 is not set +# CONFIG_RTC_DRV_ISL12057 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_JZ4740 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_MCP795 is not set +# CONFIG_RTC_DRV_MOXART is not set +# CONFIG_RTC_DRV_MPC5121 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_MT2712 is not set +# CONFIG_RTC_DRV_OMAP is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_PL030 is not set +# CONFIG_RTC_DRV_PL031 is not set +# CONFIG_RTC_DRV_PS3 is not set +# CONFIG_RTC_DRV_PT7C4338 is not set +# CONFIG_RTC_DRV_R7301 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_RTC7301 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set +# CONFIG_RTC_DRV_RV3032 is not set +# CONFIG_RTC_DRV_RV8803 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RX8010 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_SD3078 is not set +# CONFIG_RTC_DRV_SNVS is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_SUN6I is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_ZYNQMP is not set +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_NVMEM is not set +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_RTL8192E is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTL8306_PHY is not set +# CONFIG_RTL8366RB_PHY is not set +# CONFIG_RTL8366S_PHY is not set +# CONFIG_RTL8366_SMI is not set +# CONFIG_RTL8366_SMI_DEBUG_FS is not set +# CONFIG_RTL8367B_PHY is not set +# CONFIG_RTL8367_PHY is not set +# CONFIG_RTLLIB is not set +# CONFIG_RTL_CARDS is not set +# CONFIG_RTS5208 is not set +CONFIG_RT_MUTEXES=y +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_RUNTIME_TESTING_MENU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_RXKAD=y +# CONFIG_S2IO is not set +# CONFIG_SAMPLES is not set +# CONFIG_SAMSUNG_LAPTOP is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_AHCI_PLATFORM is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_FSL is not set +# CONFIG_SATA_HIGHBANK is not set +# CONFIG_SATA_HOST is not set +# CONFIG_SATA_INIC162X is not set +CONFIG_SATA_MOBILE_LPM_POLICY=0 +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PMP is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_RCAR is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SBC_FITPC2_WATCHDOG is not set +CONFIG_SBITMAP=y +# CONFIG_SC92031 is not set +# CONFIG_SCA3000 is not set +# CONFIG_SCACHE_DEBUGFS is not set +# CONFIG_SCC is not set +# CONFIG_SCD30_CORE is not set +# CONFIG_SCF_TORTURE_TEST is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHED_HRTICK=y +# CONFIG_SCHED_MC is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCHED_SMT is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_SCR24X is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CHELSIO_FCOE is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_FDOMAIN_PCI is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_HISI_SAS is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_ISCI is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_LPFC is not set +CONFIG_SCSI_MOD=y +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVSAS_DEBUG is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_MYRB is not set +# CONFIG_SCSI_MYRS is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_PMCRAID is not set +CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +# CONFIG_SCSI_SMARTPQI is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_SDIO_UART is not set +# CONFIG_SDR_MAX2175 is not set +# CONFIG_SDR_PLATFORM_DRIVERS is not set +# CONFIG_SD_ADC_MODULATOR is not set +# CONFIG_SECCOMP is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_APPARMOR is not set +CONFIG_SECURITY_DMESG_RESTRICT=y +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set +# CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_SELINUX_AVC_STATS is not set +# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 +# CONFIG_SECURITY_SELINUX_DEVELOP is not set +# CONFIG_SECURITY_SELINUX_DISABLE is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_ACPI_POWER is not set +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM1177 is not set +# CONFIG_SENSORS_ADM1266 is not set +# CONFIG_SENSORS_ADM1275 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_SENSORS_APPLESMC is not set +# CONFIG_SENSORS_AS370 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ASC7621 is not set +# CONFIG_SENSORS_ASPEED is not set +# CONFIG_SENSORS_ATK0110 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_AXI_FAN_CONTROL is not set +# CONFIG_SENSORS_BEL_PFE is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_CORSAIR_CPRO is not set +# CONFIG_SENSORS_DELL_SMM is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_DRIVETEMP is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FAM15H_POWER is not set +# CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_GSC is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_HMC5843 is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set +# CONFIG_SENSORS_HTU21 is not set +# CONFIG_SENSORS_I5500 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_IBM_CFFPS is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_INA209 is not set +# CONFIG_SENSORS_INA2XX is not set +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_INSPUR_IPSPS is not set +# CONFIG_SENSORS_IR35221 is not set +# CONFIG_SENSORS_IR38064 is not set +# CONFIG_SENSORS_IRPS5401 is not set +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_SENSORS_ISL68137 is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_K10TEMP is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LM25066 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2947_I2C is not set +# CONFIG_SENSORS_LTC2947_SPI is not set +# CONFIG_SENSORS_LTC2978 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC3815 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_LTQ_CPUTEMP is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16064 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX16601 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX20730 is not set +# CONFIG_SENSORS_MAX20751 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX31730 is not set +# CONFIG_SENSORS_MAX31785 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MAX34440 is not set +# CONFIG_SENSORS_MAX6621 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX8688 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_MP2975 is not set +# CONFIG_SENSORS_MR75203 is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +# CONFIG_SENSORS_NSA320 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_OCC_P8_I2C is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PMBUS is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_PXE1610 is not set +# CONFIG_SENSORS_RM3100_I2C is not set +# CONFIG_SENSORS_RM3100_SPI is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_TMP513 is not set +# CONFIG_SENSORS_TPS40422 is not set +# CONFIG_SENSORS_TPS53679 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_SENSORS_UCD9000 is not set +# CONFIG_SENSORS_UCD9200 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VIA_CPUTEMP is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83773G is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_XDPE122 is not set +# CONFIG_SENSORS_XGENE is not set +# CONFIG_SENSORS_ZL6100 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_16550A_VARIANTS=y +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_ASPEED_VUART is not set +# CONFIG_SERIAL_8250_BOCA is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_DMA=y +# CONFIG_SERIAL_8250_DW is not set +# CONFIG_SERIAL_8250_EM is not set +# CONFIG_SERIAL_8250_EXAR is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set +# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250_FINTEK is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_HUB6 is not set +# CONFIG_SERIAL_8250_INGENIC is not set +# CONFIG_SERIAL_8250_LPSS is not set +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_MID is not set +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_PCI is not set +# CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_AMBA_PL010 is not set +# CONFIG_SERIAL_AMBA_PL011 is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_BCM63XX is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_DEV_BUS is not set +CONFIG_SERIAL_EARLYCON=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_FSL_LINFLEXUART is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_SIFIVE is not set +# CONFIG_SERIAL_SPRD is not set +# CONFIG_SERIAL_STM32 is not set +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_UARTLITE is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIO is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +# CONFIG_SFC is not set +# CONFIG_SFC_FALCON is not set +# CONFIG_SFI is not set +# CONFIG_SFP is not set +# CONFIG_SF_PDMA is not set +# CONFIG_SGETMASK_SYSCALL is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP30 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SGI_MFD_IOC3 is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_SG_POOL is not set +# CONFIG_SG_SPLIT is not set +CONFIG_SHMEM=y +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set +# CONFIG_SH_ETH is not set +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SIGNALFD=y +# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_SIMPLE_PM_BUS is not set +# CONFIG_SIOX is not set +# CONFIG_SIS190 is not set +# CONFIG_SIS900 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SKY2_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLABINFO=y +# CONFIG_SLAB_FREELIST_HARDENED is not set +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLAB_MERGE_DEFAULT=y +# CONFIG_SLHC is not set +# CONFIG_SLICOSS is not set +# CONFIG_SLIMBUS is not set +# CONFIG_SLIP is not set +# CONFIG_SLOB is not set +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_MEMCG_SYSFS_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_SMARTJOYPLUS_FF is not set +# CONFIG_SMC911X is not set +# CONFIG_SMC9194 is not set +# CONFIG_SMC91X is not set +# CONFIG_SMP is not set +# CONFIG_SMSC911X is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_SMS_USB_DRV is not set +# CONFIG_SM_FTL is not set +# CONFIG_SND is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ADLIB is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_ASIHPI is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_ATMEL_AC97C is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AUDIO_GRAPH_CARD is not set +# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DESIGNWARE_I2S is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_EDMA_SOC is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FIREWIRE is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set +# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_PREALLOC_SIZE=64 +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_HWDEP is not set +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_ISA is not set +# CONFIG_SND_JZ4740_SOC_I2S is not set +# CONFIG_SND_KIRKWOOD_SOC is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +CONFIG_SND_MAX_CARDS=16 +# CONFIG_SND_MIA is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_MIRO is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MPC52xx_SOC_EFIKA is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_MXS_SOC is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_OXYGEN is not set +CONFIG_SND_PCI=y +# CONFIG_SND_PCM is not set +# CONFIG_SND_PCMCIA is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_PCM_TIMER is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_PORTMAN2X4 is not set +# CONFIG_SND_POWERPC_SOC is not set +# CONFIG_SND_PPC is not set +CONFIG_SND_PROC_FS=y +# CONFIG_SND_RAWMIDI is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_SIMPLE_CARD is not set +# CONFIG_SND_SIMPLE_SCU_CARD is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SOC is not set +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_ADAU7118_HW is not set +# CONFIG_SND_SOC_ADAU7118_I2C is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4118 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_SOC_AMD_ACP3x is not set +# CONFIG_SND_SOC_AMD_RENOIR is not set +# CONFIG_SND_SOC_AU1XAUDIO is not set +# CONFIG_SND_SOC_AU1XPSC is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS35L36 is not set +# CONFIG_SND_SOC_CS4234 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4341 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +# CONFIG_SND_SOC_CX2072X is not set +# CONFIG_SND_SOC_DA7213 is not set +# CONFIG_SND_SOC_DIO2125 is not set +# CONFIG_SND_SOC_DMIC is not set +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +# CONFIG_SND_SOC_ES8316 is not set +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_EUKREA_TLV320 is not set +# CONFIG_SND_SOC_FSL_ASOC_CARD is not set +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_ICS43432 is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_IMX_AUDMIX is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_SOC_IMX_ES8328 is not set +# CONFIG_SND_SOC_IMX_SPDIF is not set +# CONFIG_SND_SOC_IMX_WM8962 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_INTEL_APL is not set +# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set +# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set +# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set +# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set +# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set +# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set +# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set +# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set +# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set +# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set +# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set +# CONFIG_SND_SOC_INTEL_CATPT is not set +# CONFIG_SND_SOC_INTEL_CFL is not set +# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set +# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set +# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set +# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set +# CONFIG_SND_SOC_INTEL_CML_H is not set +# CONFIG_SND_SOC_INTEL_CML_LP is not set +# CONFIG_SND_SOC_INTEL_CNL is not set +# CONFIG_SND_SOC_INTEL_GLK is not set +# CONFIG_SND_SOC_INTEL_HASWELL is not set +# CONFIG_SND_SOC_INTEL_KBL is not set +# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set +# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set +# CONFIG_SND_SOC_INTEL_KEEMBAY is not set +# CONFIG_SND_SOC_INTEL_SKL is not set +# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set +# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set +# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set +# CONFIG_SND_SOC_INTEL_SKYLAKE is not set +# CONFIG_SND_SOC_INTEL_SST is not set +CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y +# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set +# CONFIG_SND_SOC_JZ4725B_CODEC is not set +# CONFIG_SND_SOC_JZ4740_CODEC is not set +# CONFIG_SND_SOC_JZ4770_CODEC is not set +# CONFIG_SND_SOC_MA120X0P is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MAX98088 is not set +# CONFIG_SND_SOC_MAX98357A is not set +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX98373_I2C is not set +# CONFIG_SND_SOC_MAX98390 is not set +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MAX9867 is not set +# CONFIG_SND_SOC_MAX98927 is not set +# CONFIG_SND_SOC_MEDIATEK is not set +# CONFIG_SND_SOC_MPC5200_AC97 is not set +# CONFIG_SND_SOC_MPC5200_I2S is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_MT2701 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_MT6358 is not set +# CONFIG_SND_SOC_MT6660 is not set +# CONFIG_SND_SOC_MT6797 is not set +# CONFIG_SND_SOC_MT8173 is not set +# CONFIG_SND_SOC_MT8183 is not set +# CONFIG_SND_SOC_MTK_BTCVSD is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_NAU8824 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3060_I2C is not set +# CONFIG_SND_SOC_PCM3060_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_RK3328 is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SOF_TOPLEVEL is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS2562 is not set +# CONFIG_SND_SOC_TAS2764 is not set +# CONFIG_SND_SOC_TAS2770 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320ADCX140 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set +# CONFIG_SND_SOC_XILINX_I2S is not set +# CONFIG_SND_SOC_XILINX_SPDIF is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_SND_SOC_ZL38060 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_SSCAPE is not set +# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set +# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set +# CONFIG_SND_SUN4I_CODEC is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_TIMER is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_US122L is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_VARIAX is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_WAVEFRONT is not set +CONFIG_SND_X86=y +# CONFIG_SND_XEN_FRONTEND is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SNI_RM is not set +# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set +# CONFIG_SOCK_CGROUP_DATA is not set +# CONFIG_SOC_AM33XX is not set +# CONFIG_SOC_AM43XX is not set +# CONFIG_SOC_BRCMSTB is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_SOC_DRA7XX is not set +# CONFIG_SOC_HAS_OMAP2_SDRC is not set +# CONFIG_SOC_OMAP5 is not set +# CONFIG_SOC_TI is not set +# CONFIG_SOFTLOCKUP_DETECTOR is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_SONYPI is not set +# CONFIG_SONY_LAPTOP is not set +# CONFIG_SOUND is not set +# CONFIG_SOUNDWIRE is not set +# CONFIG_SOUND_OSS_CORE is not set +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_SP5100_TCO is not set +# CONFIG_SPARSEMEM_MANUAL is not set +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_SPARSE_IRQ is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_SPEAKUP is not set +# CONFIG_SPI is not set +# CONFIG_SPINLOCK_TEST is not set +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AMD is not set +# CONFIG_SPI_AU1550 is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BCM2835 is not set +# CONFIG_SPI_BCM_QSPI is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_CADENCE_QUADSPI is not set +# CONFIG_SPI_DEBUG is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_FSL_ESPI is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_GPIO_OLD is not set +# CONFIG_SPI_IMG_SPFI is not set +# CONFIG_SPI_LANTIQ_SSC is not set +# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_SPI_MEM is not set +# CONFIG_SPI_MPC52xx is not set +# CONFIG_SPI_MPC52xx_PSC is not set +# CONFIG_SPI_MTK_QUADSPI is not set +# CONFIG_SPI_MUX is not set +# CONFIG_SPI_MXIC is not set +# CONFIG_SPI_NXP_FLEXSPI is not set +# CONFIG_SPI_OCTEON is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_ORION is not set +# CONFIG_SPI_PL022 is not set +# CONFIG_SPI_PPC4xx is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_QCOM_QSPI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_S3C64XX is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_SIFIVE is not set +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_TI_QSPI is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_TOPCLIFF_PCH is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_XWAY is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_SPMI is not set +# CONFIG_SPS30 is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y +# CONFIG_SQUASHFS_DECOMP_SINGLE is not set +CONFIG_SQUASHFS_EMBEDDED=y +# CONFIG_SQUASHFS_FILE_CACHE is not set +CONFIG_SQUASHFS_FILE_DIRECT=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_ZLIB is not set +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SRAM is not set +# CONFIG_SRF04 is not set +# CONFIG_SRF08 is not set +# CONFIG_SSB is not set +# CONFIG_SSB_DEBUG is not set +# CONFIG_SSB_DRIVER_GPIO is not set +# CONFIG_SSB_HOST_SOC is not set +# CONFIG_SSB_PCMCIAHOST is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB_SDIOHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSFDC is not set +# CONFIG_STACKPROTECTOR is not set +# CONFIG_STACKPROTECTOR_STRONG is not set +# CONFIG_STACKTRACE is not set +CONFIG_STACKTRACE_SUPPORT=y +# CONFIG_STACK_TRACER is not set +# CONFIG_STACK_VALIDATION is not set +CONFIG_STAGING=y +# CONFIG_STAGING_BOARD is not set +# CONFIG_STAGING_GASKET_FRAMEWORK is not set +# CONFIG_STAGING_MEDIA is not set +CONFIG_STANDALONE=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_STATIC_USERMODEHELPER is not set +CONFIG_STDBINUTILS=y +# CONFIG_STE10XP is not set +# CONFIG_STE_MODEM_RPROC is not set +# CONFIG_STK3310 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set +# CONFIG_STM is not set +# CONFIG_STMMAC_ETH is not set +# CONFIG_STMMAC_PCI is not set +# CONFIG_STMMAC_PLATFORM is not set +# CONFIG_STM_DUMMY is not set +# CONFIG_STM_SOURCE_CONSOLE is not set +CONFIG_STP=y +# CONFIG_STREAM_PARSER is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_STRICT_MODULE_RWX=y +# CONFIG_STRING_SELFTEST is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_STX104 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_SUN4I_GPADC is not set +# CONFIG_SUN50I_DE2_BUS is not set +# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_SUNGEM is not set +# CONFIG_SUNRPC is not set +# CONFIG_SUNRPC_DEBUG is not set +CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y +# CONFIG_SUNRPC_GSS is not set +# CONFIG_SUNXI_SRAM is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_SURFACE_3_BUTTON is not set +# CONFIG_SUSPEND is not set +# CONFIG_SUSPEND_SKIP_SYNC is not set +CONFIG_SWAP=y +# CONFIG_SWCONFIG is not set +# CONFIG_SWCONFIG_B53 is not set +# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set +# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set +# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set +# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set +# CONFIG_SWCONFIG_LEDS is not set +# CONFIG_SW_SYNC is not set +# CONFIG_SX9310 is not set +# CONFIG_SX9500 is not set +# CONFIG_SXGBE_ETH is not set +CONFIG_SYMBOLIC_ERRNAME=y +# CONFIG_SYNCLINK_CS is not set +# CONFIG_SYNC_FILE is not set +# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set +# CONFIG_SYNTH_EVENTS is not set +CONFIG_SYN_COOKIES=y +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_SYSCTL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSFS=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_SYSFS_SYSCALL is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSV68_PARTITION is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_SYSV_FS is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_T5403 is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_TASKSTATS is not set +# CONFIG_TASKS_RCU is not set +# CONFIG_TASK_XACCT is not set +# CONFIG_TC35815 is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_CRB is not set +# CONFIG_TCG_FTPM_TEE is not set +# CONFIG_TCG_INFINEON is not set +# CONFIG_TCG_NSC is not set +# CONFIG_TCG_ST33_I2C is not set +# CONFIG_TCG_TIS is not set +# CONFIG_TCG_TIS_I2C_ATMEL is not set +# CONFIG_TCG_TIS_I2C_INFINEON is not set +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_TIS_SPI is not set +# CONFIG_TCG_TIS_ST33ZP24_I2C is not set +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TCG_VTPM_PROXY is not set +# CONFIG_TCG_XEN is not set +# CONFIG_TCIC is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BBR is not set +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CDG is not set +CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_DCTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_NV is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_MD5SIG is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_TEE is not set +# CONFIG_TEGRA_AHB is not set +# CONFIG_TEGRA_HOST1X is not set +# CONFIG_TEHUTI is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITOPS is not set +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_FREE_PAGES is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_KASAN_MODULE is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_LOCKUP is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_MEMINIT is not set +# CONFIG_TEST_MIN_HEAP is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_POWER is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_SORT is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UBSAN is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_VMALLOC is not set +# CONFIG_TEST_XARRAY is not set +CONFIG_TEXTSEARCH=y +# CONFIG_TEXTSEARCH_BM is not set +# CONFIG_TEXTSEARCH_FSM is not set +# CONFIG_TEXTSEARCH_KMP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_EMULATION is not set +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_THERMAL_MMIO is not set +# CONFIG_THERMAL_NETLINK is not set +# CONFIG_THERMAL_STATISTICS is not set +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +# CONFIG_THINKPAD_ACPI is not set +CONFIG_THIN_ARCHIVES=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_THUMB2_KERNEL is not set +# CONFIG_THUNDERBOLT is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_RGX is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_TICK_CPU_ACCOUNTING is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_TIFM_CORE is not set +# CONFIG_TIGON3 is not set +# CONFIG_TIMB_DMA is not set +CONFIG_TIMERFD=y +# CONFIG_TIMER_STATS is not set +# CONFIG_TIME_NS is not set +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_ILI9486 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set +CONFIG_TINY_RCU=y +# CONFIG_TIPC is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS124S08 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_ADS8344 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_TI_AM335X_ADC is not set +# CONFIG_TI_CPSW is not set +# CONFIG_TI_CPSW_ALE is not set +# CONFIG_TI_CPSW_PHY_SEL is not set +# CONFIG_TI_CPTS is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set +# CONFIG_TI_DAC7311 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_TI_DAC7612 is not set +# CONFIG_TI_DAVINCI_CPDMA is not set +# CONFIG_TI_DAVINCI_MDIO is not set +# CONFIG_TI_ST is not set +# CONFIG_TI_SYSCON_RESET is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_TLAN is not set +# CONFIG_TLS is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_INODE64 is not set +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_TMPFS_XATTR=y +# CONFIG_TOPSTAR_LAPTOP is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_TOSHIBA_HAPS is not set +# CONFIG_TOUCHSCREEN_88PM860X is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_ADC is not set +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AR1021_I2C is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set +# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set +# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set +# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set +# CONFIG_TOUCHSCREEN_DA9034 is not set +# CONFIG_TOUCHSCREEN_DA9052 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set +# CONFIG_TOUCHSCREEN_HP600 is not set +# CONFIG_TOUCHSCREEN_HP7XX is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set +# CONFIG_TOUCHSCREEN_IPROC is not set +# CONFIG_TOUCHSCREEN_IQS5XX is not set +# CONFIG_TOUCHSCREEN_LPC32XX is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MC13783 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set +# CONFIG_TOUCHSCREEN_MIGOR is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MX25 is not set +# CONFIG_TOUCHSCREEN_MXS_LRADC is not set +# CONFIG_TOUCHSCREEN_PCAP is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_PROPERTIES is not set +# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set +# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_STMFTS is not set +# CONFIG_TOUCHSCREEN_STMPE is not set +# CONFIG_TOUCHSCREEN_SUN4I is not set +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set +# CONFIG_TOUCHSCREEN_SX8654 is not set +# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_TS4800 is not set +# CONFIG_TOUCHSCREEN_TSC2004 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set +# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_3M is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set +# CONFIG_TOUCHSCREEN_USB_E2I is not set +# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set +# CONFIG_TOUCHSCREEN_USB_EGALAX is not set +# CONFIG_TOUCHSCREEN_USB_ELO is not set +# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set +# CONFIG_TOUCHSCREEN_USB_ETURBO is not set +# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set +# CONFIG_TOUCHSCREEN_USB_GOTOP is not set +# CONFIG_TOUCHSCREEN_USB_GUNZE is not set +# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set +# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set +# CONFIG_TOUCHSCREEN_USB_ITM is not set +# CONFIG_TOUCHSCREEN_USB_JASTEC is not set +# CONFIG_TOUCHSCREEN_USB_NEXIO is not set +# CONFIG_TOUCHSCREEN_USB_PANJIT is not set +# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +# CONFIG_TOUCHSCREEN_WM831X is not set +# CONFIG_TOUCHSCREEN_WM9705 is not set +# CONFIG_TOUCHSCREEN_WM9712 is not set +# CONFIG_TOUCHSCREEN_WM9713 is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set +# CONFIG_TOUCHSCREEN_ZET6223 is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +# CONFIG_TOUCHSCREEN_ZINITIX is not set +# CONFIG_TPL0102 is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +# CONFIG_TRACER_SNAPSHOT is not set +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_TRACE_EVAL_MAP_FILE is not set +# CONFIG_TRACE_EVENT_INJECT is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_TRACE_SINK is not set +# CONFIG_TRACING_EVENTS_GPIO is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_TRAD_SIGNALS=y +# CONFIG_TRANSPARENT_HUGEPAGE is not set +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +# CONFIG_TRUSTED_FOUNDATIONS is not set +# CONFIG_TRUSTED_KEYS is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL2x7x is not set +# CONFIG_TSL4531 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_TTPCI_EEPROM is not set +CONFIG_TTY=y +# CONFIG_TTY_PRINTK is not set +# CONFIG_TUN is not set +# CONFIG_TUN_VNET_CROSS_LE is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL4030_MADC is not set +# CONFIG_TWL6030_GPADC is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_TYPEC is not set +# CONFIG_TYPEC_TCPM is not set +# CONFIG_TYPEC_UCSI is not set +# CONFIG_TYPHOON is not set +# CONFIG_UACCESS_WITH_MEMCPY is not set +# CONFIG_UBIFS_ATIME_SUPPORT is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +# CONFIG_UBIFS_FS_AUTHENTICATION is not set +# CONFIG_UBIFS_FS_ENCRYPTION is not set +CONFIG_UBIFS_FS_LZO=y +# CONFIG_UBIFS_FS_SECURITY is not set +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +# CONFIG_UBSAN_MISC is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_UCSI is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDMABUF is not set +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_UFS_FS is not set +# CONFIG_UHID is not set +CONFIG_UID16=y +# CONFIG_UIO is not set +# CONFIG_ULTRA is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_UNICODE is not set +# CONFIG_UNISYSSPAR is not set +# CONFIG_UNISYS_VISORBUS is not set +CONFIG_UNIX=y +CONFIG_UNIX98_PTYS=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_UNIX_DIAG is not set +CONFIG_UNIX_SCM=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_UNWINDER_FRAME_POINTER is not set +# CONFIG_UPROBES is not set +# CONFIG_UPROBE_EVENTS is not set +# CONFIG_US5182D is not set +# CONFIG_USB is not set +# CONFIG_USB4 is not set +# CONFIG_USBIP_CORE is not set +CONFIG_USBIP_VHCI_HC_PORTS=8 +CONFIG_USBIP_VHCI_NR_HCS=1 +# CONFIG_USBIP_VUDC is not set +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AIRSPY is not set +CONFIG_USB_ALI_M5632=y +# CONFIG_USB_AMD5536UDC is not set +CONFIG_USB_AN2720=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_ATM is not set +CONFIG_USB_AUTOSUSPEND_DELAY=2 +# CONFIG_USB_BDC_UDC is not set +CONFIG_USB_BELKIN=y +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_CDNS3 is not set +# CONFIG_USB_CHAOSKEY is not set +# CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_CHIPIDEA_GENERIC is not set +# CONFIG_USB_CHIPIDEA_IMX is not set +# CONFIG_USB_CHIPIDEA_MSM is not set +# CONFIG_USB_CHIPIDEA_PCI is not set +# CONFIG_USB_CHIPIDEA_TEGRA is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_CONN_GPIO is not set +# CONFIG_USB_CXACRU is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_DUAL_ROLE is not set +# CONFIG_USB_DWC2_HOST is not set +# CONFIG_USB_DWC2_PERIPHERAL is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC3_EXYNOS is not set +# CONFIG_USB_DWC3_HAPS is not set +# CONFIG_USB_DWC3_KEYSTONE is not set +# CONFIG_USB_DWC3_OF_SIMPLE is not set +# CONFIG_USB_DWC3_PCI is not set +# CONFIG_USB_DWC3_QCOM is not set +# CONFIG_USB_DWC3_ULPI is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_EHCI_ATH79 is not set +# CONFIG_USB_EHCI_FSL is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_EHCI_HCD_AT91 is not set +# CONFIG_USB_EHCI_HCD_OMAP is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_EHCI_MSM is not set +# CONFIG_USB_EHCI_MV is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_EZUSB_FX2 is not set +# CONFIG_USB_FEW_INIT_RETRIES is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_FSL_USB2 is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_GADGET is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 +CONFIG_USB_GADGET_VBUS_DRAW=2 +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_GSPCA is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_USB_HACKRF is not set +# CONFIG_USB_HCD_TEST_MODE is not set +# CONFIG_USB_HID is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_HSIC_USB3503 is not set +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_HUB_USB251XB is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_IMX21_HCD is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1301 is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760 is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_KC2190 is not set +# CONFIG_USB_LAN78XX is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LGM_PHY is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_M5602 is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_MAX3420_UDC is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_MSI2500 is not set +# CONFIG_USB_MSM_OTG is not set +# CONFIG_USB_MTU3 is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MXS_PHY is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_NET_AQC111 is not set +# CONFIG_USB_NET_AX88179_178A is not set +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +# CONFIG_USB_NET_CDC_NCM is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_CH9200 is not set +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_DRIVERS is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_USB_NET_SMSC75XX is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_SR9700 is not set +# CONFIG_USB_NET_SR9800 is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_OHCI_HCD_PCI is not set +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_SSB is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_OTG_PRODUCTLIST is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_PCI is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PHY is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_PWC_INPUT_EVDEV is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RAW_GADGET is not set +# CONFIG_USB_RCAR_PHY is not set +# CONFIG_USB_RENESAS_USBHS is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_ROLES_INTEL_XHCI is not set +# CONFIG_USB_ROLE_SWITCH is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_RTL8152 is not set +# CONFIG_USB_S2255 is not set +# CONFIG_USB_SERIAL is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_DEBUG is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_F81232 is not set +# CONFIG_USB_SERIAL_F8153X is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_GARMIN is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_METRO is not set +# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MXUPORT is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_QCAUX is not set +# CONFIG_USB_SERIAL_QT2 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SIMPLE is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_SSU100 is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_UPD78F0730 is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_WISHBONE is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_XSENS_MT is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_SNP_UDC_PLAT is not set +# CONFIG_USB_SPEEDTOUCH is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_TMC is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_UAS is not set +# CONFIG_USB_UEAGLEATM is not set +# CONFIG_USB_ULPI is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_USS720 is not set +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_VL600 is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set +# CONFIG_USB_XHCI_DBGCAP is not set +# CONFIG_USB_XHCI_HCD is not set +# CONFIG_USB_XHCI_MVEBU is not set +# CONFIG_USB_XHCI_PCI_RENESAS is not set +# CONFIG_USB_XUSBATM is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USELIB is not set +# CONFIG_USERFAULTFD is not set +# CONFIG_USERIO is not set +# CONFIG_USE_OF is not set +# CONFIG_UTS_NS is not set +# CONFIG_UWB is not set +# CONFIG_U_SERIAL_CONSOLE is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_VALIDATE_FS_PARSER is not set +# CONFIG_VBOXGUEST is not set +# CONFIG_VCNL3020 is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VCNL4035 is not set +# CONFIG_VDPA is not set +CONFIG_VDSO=y +# CONFIG_VEML6030 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VETH is not set +# CONFIG_VEXPRESS_CONFIG is not set +# CONFIG_VF610_ADC is not set +# CONFIG_VF610_DAC is not set +# CONFIG_VFAT_FS is not set +# CONFIG_VFIO is not set +# CONFIG_VGASTATE is not set +# CONFIG_VGA_ARB is not set +# CONFIG_VGA_SWITCHEROO is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set +CONFIG_VHOST_MENU=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_VSOCK is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV748X is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_AK7375 is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_AM437X_VPFE is not set +# CONFIG_VIDEO_ASPEED is not set +# CONFIG_VIDEO_ATMEL_ISC is not set +# CONFIG_VIDEO_ATMEL_ISI is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_CADENCE is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_CX2341X is not set +# CONFIG_VIDEO_CX25840 is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_DM6446_CCDC is not set +# CONFIG_VIDEO_DT3155 is not set +# CONFIG_VIDEO_DW9714 is not set +# CONFIG_VIDEO_DW9768 is not set +# CONFIG_VIDEO_DW9807_VCM is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_ET8EK8 is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_GO7007 is not set +# CONFIG_VIDEO_GS1662 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HI556 is not set +# CONFIG_VIDEO_I2C is not set +# CONFIG_VIDEO_IMX214 is not set +# CONFIG_VIDEO_IMX219 is not set +# CONFIG_VIDEO_IMX258 is not set +# CONFIG_VIDEO_IMX274 is not set +# CONFIG_VIDEO_IMX290 is not set +# CONFIG_VIDEO_IMX319 is not set +# CONFIG_VIDEO_IMX355 is not set +# CONFIG_VIDEO_IMX477 is not set +# CONFIG_VIDEO_IRS1125 is not set +# CONFIG_VIDEO_IR_I2C is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_MAX9286 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_MT9M001 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9T112 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_MT9V111 is not set +# CONFIG_VIDEO_MUX is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_OMAP2_VOUT is not set +# CONFIG_VIDEO_OV13858 is not set +# CONFIG_VIDEO_OV2640 is not set +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV2680 is not set +# CONFIG_VIDEO_OV2685 is not set +# CONFIG_VIDEO_OV2740 is not set +# CONFIG_VIDEO_OV5640 is not set +# CONFIG_VIDEO_OV5645 is not set +# CONFIG_VIDEO_OV5647 is not set +# CONFIG_VIDEO_OV5670 is not set +# CONFIG_VIDEO_OV5675 is not set +# CONFIG_VIDEO_OV5695 is not set +# CONFIG_VIDEO_OV6650 is not set +# CONFIG_VIDEO_OV7251 is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV772X is not set +# CONFIG_VIDEO_OV7740 is not set +# CONFIG_VIDEO_OV8856 is not set +# CONFIG_VIDEO_OV9281 is not set +# CONFIG_VIDEO_OV9640 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_RDACM20 is not set +# CONFIG_VIDEO_RJ54N1 is not set +# CONFIG_VIDEO_S5C73M3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_SAA6588 is not set +# CONFIG_VIDEO_SAA6752HS is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_ST_MIPID02 is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TDA1997X is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_THS8200 is not set +# CONFIG_VIDEO_TIMBERDALE is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_TM6000 is not set +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_TW9910 is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_USBTV is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_VIDEO_V4L2 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_VPX3220 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_XILINX is not set +# CONFIG_VIDEO_ZORAN is not set +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_BLK_SCSI is not set +# CONFIG_VIRTIO_CONSOLE is not set +# CONFIG_VIRTIO_FS is not set +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MENU=y +# CONFIG_VIRTIO_MMIO is not set +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRT_TO_BUS=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_VL53L0X_I2C is not set +# CONFIG_VL6180 is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_VLAN_8021Q_MVRP is not set +# CONFIG_VME_BUS is not set +# CONFIG_VMSPLIT_1G is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMWARE_PVSCSI is not set +# CONFIG_VMXNET3 is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_VOP_BUS is not set +# CONFIG_VORTEX is not set +# CONFIG_VSOCKETS is not set +# CONFIG_VSOCKETS_DIAG is not set +# CONFIG_VT is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_VXFS_FS is not set +# CONFIG_VXGE is not set +# CONFIG_VXLAN is not set +# CONFIG_VZ89X is not set +# CONFIG_W1 is not set +# CONFIG_W1_CON is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_GPIO is not set +# CONFIG_W1_MASTER_MATROX is not set +# CONFIG_W1_MASTER_SGI is not set +# CONFIG_W1_SLAVE_DS2405 is not set +# CONFIG_W1_SLAVE_DS2406 is not set +# CONFIG_W1_SLAVE_DS2408 is not set +# CONFIG_W1_SLAVE_DS2413 is not set +# CONFIG_W1_SLAVE_DS2423 is not set +# CONFIG_W1_SLAVE_DS2430 is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2438 is not set +# CONFIG_W1_SLAVE_DS250X is not set +# CONFIG_W1_SLAVE_DS2780 is not set +# CONFIG_W1_SLAVE_DS2781 is not set +# CONFIG_W1_SLAVE_DS2805 is not set +# CONFIG_W1_SLAVE_DS28E04 is not set +# CONFIG_W1_SLAVE_DS28E17 is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_WAN is not set +# CONFIG_WANXL is not set +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_CORE is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +# CONFIG_WATCHDOG_SYSFS is not set +# CONFIG_WATCH_QUEUE is not set +# CONFIG_WD80x3 is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_WDTPCI is not set +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PRIV=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WILINK_PLATFORM_DATA=y +# CONFIG_WIMAX is not set +# CONFIG_WIREGUARD is not set +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_WDS is not set +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +# CONFIG_WL18XX is not set +CONFIG_WLAN=y +# CONFIG_WLAN_VENDOR_ADMTEK is not set +# CONFIG_WLAN_VENDOR_ATH is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +# CONFIG_WLAN_VENDOR_BROADCOM is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +# CONFIG_WLAN_VENDOR_INTEL is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +# CONFIG_WLAN_VENDOR_MARVELL is not set +# CONFIG_WLAN_VENDOR_MEDIATEK is not set +# CONFIG_WLAN_VENDOR_MICROCHIP is not set +# CONFIG_WLAN_VENDOR_QUANTENNA is not set +# CONFIG_WLAN_VENDOR_RALINK is not set +# CONFIG_WLAN_VENDOR_REALTEK is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +# CONFIG_WLCORE is not set +CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +# CONFIG_X25 is not set +# CONFIG_X509_CERTIFICATE_PARSER is not set +# CONFIG_X86_PKG_TEMP_THERMAL is not set +CONFIG_X86_SYSFB=y +# CONFIG_XDP_SOCKETS is not set +# CONFIG_XEN is not set +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +# CONFIG_XEN_PVCALLS_FRONTEND is not set +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XFRM=y +# CONFIG_XFRM_INTERFACE is not set +# CONFIG_XFRM_IPCOMP is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_USER is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_ONLINE_SCRUB is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_SUPPORT_V4 is not set +# CONFIG_XFS_WARN is not set +# CONFIG_XILINX_AXI_EMAC is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_XILINX_LL_TEMAC is not set +# CONFIG_XILINX_SDFEC is not set +# CONFIG_XILINX_VCU is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_XILINX_XADC is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_XILINX_ZYNQMP_DPDMA is not set +# CONFIG_XILLYBUS is not set +# CONFIG_XIL_AXIS_FIFO is not set +# CONFIG_XIP_KERNEL is not set +# CONFIG_XMON is not set +CONFIG_XZ_DEC=y +# CONFIG_XZ_DEC_ARM is not set +# CONFIG_XZ_DEC_ARMTHUMB is not set +# CONFIG_XZ_DEC_BCJ is not set +# CONFIG_XZ_DEC_IA64 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_SPARC is not set +# CONFIG_XZ_DEC_TEST is not set +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_YAM is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_YENTA is not set +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +# CONFIG_YENTA_TI is not set +# CONFIG_YENTA_TOSHIBA is not set +# CONFIG_ZBUD is not set +# CONFIG_ZD1211RW is not set +# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_ZEROPLUS_FF is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ZISOFS is not set +# CONFIG_ZLIB_DEFLATE is not set +# CONFIG_ZLIB_INFLATE is not set +CONFIG_ZONE_DMA=y +# CONFIG_ZOPT2201 is not set +# CONFIG_ZPA2326 is not set +# CONFIG_ZPOOL is not set +# CONFIG_ZRAM is not set +# CONFIG_ZRAM_MEMORY_TRACKING is not set +# CONFIG_ZSMALLOC is not set +# CONFIG_ZX_TDM is not set diff --git a/target/linux/generic/hack-5.15/204-module_strip.patch b/target/linux/generic/hack-5.15/204-module_strip.patch new file mode 100644 index 0000000000..645074821f --- /dev/null +++ b/target/linux/generic/hack-5.15/204-module_strip.patch @@ -0,0 +1,212 @@ +From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 16:56:48 +0200 +Subject: build: add a hack for removing non-essential module info + +Signed-off-by: Felix Fietkau +--- + include/linux/module.h | 13 ++++++++----- + include/linux/moduleparam.h | 15 ++++++++++++--- + init/Kconfig | 7 +++++++ + kernel/module.c | 5 ++++- + scripts/mod/modpost.c | 12 ++++++++++++ + 5 files changed, 43 insertions(+), 9 deletions(-) + +--- a/include/linux/module.h ++++ b/include/linux/module.h +@@ -161,6 +161,7 @@ extern void cleanup_module(void); + + /* Generic info of form tag = "info" */ + #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info) ++#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info) + + /* For userspace: you can also call me... */ + #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias) +@@ -230,12 +231,12 @@ extern void cleanup_module(void); + * Author(s), use "Name " or just "Name", for multiple + * authors use multiple MODULE_AUTHOR() statements/lines. + */ +-#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author) ++#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author) + + /* What your module does. */ +-#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description) ++#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description) + +-#ifdef MODULE ++#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED) + /* Creates an alias so file2alias.c can find device table. */ + #define MODULE_DEVICE_TABLE(type, name) \ + extern typeof(name) __mod_##type##__##name##_device_table \ +@@ -262,7 +263,9 @@ extern typeof(name) __mod_##type##__##na + */ + + #if defined(MODULE) || !defined(CONFIG_SYSFS) +-#define MODULE_VERSION(_version) MODULE_INFO(version, _version) ++#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version) ++#elif defined(CONFIG_MODULE_STRIPPED) ++#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version) + #else + #define MODULE_VERSION(_version) \ + MODULE_INFO(version, _version); \ +@@ -285,7 +288,7 @@ extern typeof(name) __mod_##type##__##na + /* Optional firmware file (or files) needed by the module + * format is simply firmware file name. Multiple firmware + * files require multiple MODULE_FIRMWARE() specifiers */ +-#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware) ++#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware) + + #define MODULE_IMPORT_NS(ns) MODULE_INFO(import_ns, #ns) + +--- a/include/linux/moduleparam.h ++++ b/include/linux/moduleparam.h +@@ -20,6 +20,16 @@ + /* Chosen so that structs with an unsigned long line up. */ + #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long)) + ++/* This struct is here for syntactic coherency, it is not used */ ++#define __MODULE_INFO_DISABLED(name) \ ++ struct __UNIQUE_ID(name) {} ++ ++#ifdef CONFIG_MODULE_STRIPPED ++#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name) ++#else ++#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info) ++#endif ++ + #define __MODULE_INFO(tag, name, info) \ + static const char __UNIQUE_ID(name)[] \ + __used __section(".modinfo") __attribute__((unused, aligned(1))) \ +@@ -31,7 +41,7 @@ static const char __UNIQUE_ID(name)[] + /* One for each parameter, describing how to use it. Some files do + multiple of these per line, so can't just use MODULE_INFO. */ + #define MODULE_PARM_DESC(_parm, desc) \ +- __MODULE_INFO(parm, _parm, #_parm ":" desc) ++ __MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc) + + struct kernel_param; + +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -2347,6 +2347,13 @@ config UNUSED_KSYMS_WHITELIST + one per line. The path can be absolute, or relative to the kernel + source tree. + ++config MODULE_STRIPPED ++ bool "Reduce module size" ++ depends on MODULES ++ help ++ Remove module parameter descriptions, author info, version, aliases, ++ device tables, etc. ++ + endif # MODULES + + config MODULES_TREE_LOOKUP +--- a/kernel/module.c ++++ b/kernel/module.c +@@ -1285,6 +1285,7 @@ static struct module_attribute *modinfo_ + + static const char vermagic[] = VERMAGIC_STRING; + ++#if defined(CONFIG_MODVERSIONS) || !defined(CONFIG_MODULE_STRIPPED) + static int try_to_force_load(struct module *mod, const char *reason) + { + #ifdef CONFIG_MODULE_FORCE_LOAD +@@ -1296,6 +1297,7 @@ static int try_to_force_load(struct modu + return -ENOEXEC; + #endif + } ++#endif + + #ifdef CONFIG_MODVERSIONS + +@@ -3247,9 +3249,11 @@ static int setup_load_info(struct load_i + + static int check_modinfo(struct module *mod, struct load_info *info, int flags) + { +- const char *modmagic = get_modinfo(info, "vermagic"); + int err; + ++#ifndef CONFIG_MODULE_STRIPPED ++ const char *modmagic = get_modinfo(info, "vermagic"); ++ + if (flags & MODULE_INIT_IGNORE_VERMAGIC) + modmagic = NULL; + +@@ -3270,6 +3274,7 @@ static int check_modinfo(struct module * + mod->name); + add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK); + } ++#endif + + check_modinfo_retpoline(mod, info); + +--- a/scripts/mod/modpost.c ++++ b/scripts/mod/modpost.c +@@ -2037,7 +2037,9 @@ static void read_symbols(const char *mod + symname = remove_dot(info.strtab + sym->st_name); + + handle_symbol(mod, &info, sym, symname); ++#ifndef CONFIG_MODULE_STRIPPED + handle_moddevtable(mod, &info, sym, symname); ++#endif + } + + for (sym = info.symtab_start; sym < info.symtab_stop; sym++) { +@@ -2250,8 +2252,10 @@ static void add_header(struct buffer *b, + buf_printf(b, "\n"); + buf_printf(b, "BUILD_SALT;\n"); + buf_printf(b, "\n"); ++#ifndef CONFIG_MODULE_STRIPPED + buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n"); + buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n"); ++#endif + buf_printf(b, "\n"); + buf_printf(b, "__visible struct module __this_module\n"); + buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n"); +@@ -2268,8 +2272,10 @@ static void add_header(struct buffer *b, + + static void add_intree_flag(struct buffer *b, int is_intree) + { ++#ifndef CONFIG_MODULE_STRIPPED + if (is_intree) + buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n"); ++#endif + } + + /* Cannot check for assembler */ +@@ -2282,8 +2288,10 @@ static void add_retpoline(struct buffer + + static void add_staging_flag(struct buffer *b, const char *name) + { ++#ifndef CONFIG_MODULE_STRIPPED + if (strstarts(name, "drivers/staging")) + buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n"); ++#endif + } + + /** +@@ -2367,11 +2375,13 @@ static void add_depends(struct buffer *b + + static void add_srcversion(struct buffer *b, struct module *mod) + { ++#ifndef CONFIG_MODULE_STRIPPED + if (mod->srcversion[0]) { + buf_printf(b, "\n"); + buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n", + mod->srcversion); + } ++#endif + } + + static void write_buf(struct buffer *b, const char *fname) +@@ -2630,7 +2640,9 @@ int main(int argc, char **argv) + add_staging_flag(&buf, mod->name); + err |= add_versions(&buf, mod); + add_depends(&buf, mod); ++#ifndef CONFIG_MODULE_STRIPPED + add_moddevtable(&buf, mod); ++#endif + add_srcversion(&buf, mod); + + sprintf(fname, "%s.mod.c", mod->name); diff --git a/target/linux/generic/hack-5.15/205-kconfig-exit.patch b/target/linux/generic/hack-5.15/205-kconfig-exit.patch new file mode 100644 index 0000000000..c3fb7a1f99 --- /dev/null +++ b/target/linux/generic/hack-5.15/205-kconfig-exit.patch @@ -0,0 +1,11 @@ +--- a/scripts/kconfig/conf.c ++++ b/scripts/kconfig/conf.c +@@ -215,6 +215,8 @@ static int conf_sym(struct menu *menu) + break; + continue; + case 0: ++ if (!sym_has_value(sym) && !tty_stdio && getenv("FAIL_ON_UNCONFIGURED")) ++ exit(1); + newval = oldval; + break; + case '?': diff --git a/target/linux/generic/hack-5.15/210-darwin_scripts_include.patch b/target/linux/generic/hack-5.15/210-darwin_scripts_include.patch new file mode 100644 index 0000000000..be6adc0d11 --- /dev/null +++ b/target/linux/generic/hack-5.15/210-darwin_scripts_include.patch @@ -0,0 +1,3053 @@ +From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Fri, 7 Jul 2017 17:00:49 +0200 +Subject: Add an OSX specific patch to make the kernel be compiled + +lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526 +Signed-off-by: Florian Fainelli +--- + scripts/kconfig/Makefile | 3 + + scripts/mod/elf.h | 3007 ++++++++++++++++++++++++++++++++++++++++++++ + scripts/mod/mk_elfconfig.c | 4 + + scripts/mod/modpost.h | 4 + + 4 files changed, 3018 insertions(+) + create mode 100644 scripts/mod/elf.h + +--- /dev/null ++++ b/scripts/mod/elf.h +@@ -0,0 +1,3007 @@ ++/* This file defines standard ELF types, structures, and macros. ++ Copyright (C) 1995-2012 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, see ++ . */ ++ ++#ifndef _ELF_H ++#define _ELF_H 1 ++ ++/* Standard ELF types. */ ++ ++#include ++ ++/* Type for a 16-bit quantity. */ ++typedef uint16_t Elf32_Half; ++typedef uint16_t Elf64_Half; ++ ++/* Types for signed and unsigned 32-bit quantities. */ ++typedef uint32_t Elf32_Word; ++typedef int32_t Elf32_Sword; ++typedef uint32_t Elf64_Word; ++typedef int32_t Elf64_Sword; ++ ++/* Types for signed and unsigned 64-bit quantities. */ ++typedef uint64_t Elf32_Xword; ++typedef int64_t Elf32_Sxword; ++typedef uint64_t Elf64_Xword; ++typedef int64_t Elf64_Sxword; ++ ++/* Type of addresses. */ ++typedef uint32_t Elf32_Addr; ++typedef uint64_t Elf64_Addr; ++ ++/* Type of file offsets. */ ++typedef uint32_t Elf32_Off; ++typedef uint64_t Elf64_Off; ++ ++/* Type for section indices, which are 16-bit quantities. */ ++typedef uint16_t Elf32_Section; ++typedef uint16_t Elf64_Section; ++ ++/* Type for version symbol information. */ ++typedef Elf32_Half Elf32_Versym; ++typedef Elf64_Half Elf64_Versym; ++ ++ ++/* The ELF file header. This appears at the start of every ELF file. */ ++ ++#define EI_NIDENT (16) ++ ++typedef struct ++{ ++ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ ++ Elf32_Half e_type; /* Object file type */ ++ Elf32_Half e_machine; /* Architecture */ ++ Elf32_Word e_version; /* Object file version */ ++ Elf32_Addr e_entry; /* Entry point virtual address */ ++ Elf32_Off e_phoff; /* Program header table file offset */ ++ Elf32_Off e_shoff; /* Section header table file offset */ ++ Elf32_Word e_flags; /* Processor-specific flags */ ++ Elf32_Half e_ehsize; /* ELF header size in bytes */ ++ Elf32_Half e_phentsize; /* Program header table entry size */ ++ Elf32_Half e_phnum; /* Program header table entry count */ ++ Elf32_Half e_shentsize; /* Section header table entry size */ ++ Elf32_Half e_shnum; /* Section header table entry count */ ++ Elf32_Half e_shstrndx; /* Section header string table index */ ++} Elf32_Ehdr; ++ ++typedef struct ++{ ++ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */ ++ Elf64_Half e_type; /* Object file type */ ++ Elf64_Half e_machine; /* Architecture */ ++ Elf64_Word e_version; /* Object file version */ ++ Elf64_Addr e_entry; /* Entry point virtual address */ ++ Elf64_Off e_phoff; /* Program header table file offset */ ++ Elf64_Off e_shoff; /* Section header table file offset */ ++ Elf64_Word e_flags; /* Processor-specific flags */ ++ Elf64_Half e_ehsize; /* ELF header size in bytes */ ++ Elf64_Half e_phentsize; /* Program header table entry size */ ++ Elf64_Half e_phnum; /* Program header table entry count */ ++ Elf64_Half e_shentsize; /* Section header table entry size */ ++ Elf64_Half e_shnum; /* Section header table entry count */ ++ Elf64_Half e_shstrndx; /* Section header string table index */ ++} Elf64_Ehdr; ++ ++/* Fields in the e_ident array. The EI_* macros are indices into the ++ array. The macros under each EI_* macro are the values the byte ++ may have. */ ++ ++#define EI_MAG0 0 /* File identification byte 0 index */ ++#define ELFMAG0 0x7f /* Magic number byte 0 */ ++ ++#define EI_MAG1 1 /* File identification byte 1 index */ ++#define ELFMAG1 'E' /* Magic number byte 1 */ ++ ++#define EI_MAG2 2 /* File identification byte 2 index */ ++#define ELFMAG2 'L' /* Magic number byte 2 */ ++ ++#define EI_MAG3 3 /* File identification byte 3 index */ ++#define ELFMAG3 'F' /* Magic number byte 3 */ ++ ++/* Conglomeration of the identification bytes, for easy testing as a word. */ ++#define ELFMAG "\177ELF" ++#define SELFMAG 4 ++ ++#define EI_CLASS 4 /* File class byte index */ ++#define ELFCLASSNONE 0 /* Invalid class */ ++#define ELFCLASS32 1 /* 32-bit objects */ ++#define ELFCLASS64 2 /* 64-bit objects */ ++#define ELFCLASSNUM 3 ++ ++#define EI_DATA 5 /* Data encoding byte index */ ++#define ELFDATANONE 0 /* Invalid data encoding */ ++#define ELFDATA2LSB 1 /* 2's complement, little endian */ ++#define ELFDATA2MSB 2 /* 2's complement, big endian */ ++#define ELFDATANUM 3 ++ ++#define EI_VERSION 6 /* File version byte index */ ++ /* Value must be EV_CURRENT */ ++ ++#define EI_OSABI 7 /* OS ABI identification */ ++#define ELFOSABI_NONE 0 /* UNIX System V ABI */ ++#define ELFOSABI_SYSV 0 /* Alias. */ ++#define ELFOSABI_HPUX 1 /* HP-UX */ ++#define ELFOSABI_NETBSD 2 /* NetBSD. */ ++#define ELFOSABI_GNU 3 /* Object uses GNU ELF extensions. */ ++#define ELFOSABI_LINUX ELFOSABI_GNU /* Compatibility alias. */ ++#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */ ++#define ELFOSABI_AIX 7 /* IBM AIX. */ ++#define ELFOSABI_IRIX 8 /* SGI Irix. */ ++#define ELFOSABI_FREEBSD 9 /* FreeBSD. */ ++#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */ ++#define ELFOSABI_MODESTO 11 /* Novell Modesto. */ ++#define ELFOSABI_OPENBSD 12 /* OpenBSD. */ ++#define ELFOSABI_ARM_AEABI 64 /* ARM EABI */ ++#define ELFOSABI_ARM 97 /* ARM */ ++#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */ ++ ++#define EI_ABIVERSION 8 /* ABI version */ ++ ++#define EI_PAD 9 /* Byte index of padding bytes */ ++ ++/* Legal values for e_type (object file type). */ ++ ++#define ET_NONE 0 /* No file type */ ++#define ET_REL 1 /* Relocatable file */ ++#define ET_EXEC 2 /* Executable file */ ++#define ET_DYN 3 /* Shared object file */ ++#define ET_CORE 4 /* Core file */ ++#define ET_NUM 5 /* Number of defined types */ ++#define ET_LOOS 0xfe00 /* OS-specific range start */ ++#define ET_HIOS 0xfeff /* OS-specific range end */ ++#define ET_LOPROC 0xff00 /* Processor-specific range start */ ++#define ET_HIPROC 0xffff /* Processor-specific range end */ ++ ++/* Legal values for e_machine (architecture). */ ++ ++#define EM_NONE 0 /* No machine */ ++#define EM_M32 1 /* AT&T WE 32100 */ ++#define EM_SPARC 2 /* SUN SPARC */ ++#define EM_386 3 /* Intel 80386 */ ++#define EM_68K 4 /* Motorola m68k family */ ++#define EM_88K 5 /* Motorola m88k family */ ++#define EM_860 7 /* Intel 80860 */ ++#define EM_MIPS 8 /* MIPS R3000 big-endian */ ++#define EM_S370 9 /* IBM System/370 */ ++#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ ++ ++#define EM_PARISC 15 /* HPPA */ ++#define EM_VPP500 17 /* Fujitsu VPP500 */ ++#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ ++#define EM_960 19 /* Intel 80960 */ ++#define EM_PPC 20 /* PowerPC */ ++#define EM_PPC64 21 /* PowerPC 64-bit */ ++#define EM_S390 22 /* IBM S390 */ ++ ++#define EM_V800 36 /* NEC V800 series */ ++#define EM_FR20 37 /* Fujitsu FR20 */ ++#define EM_RH32 38 /* TRW RH-32 */ ++#define EM_RCE 39 /* Motorola RCE */ ++#define EM_ARM 40 /* ARM */ ++#define EM_FAKE_ALPHA 41 /* Digital Alpha */ ++#define EM_SH 42 /* Hitachi SH */ ++#define EM_SPARCV9 43 /* SPARC v9 64-bit */ ++#define EM_TRICORE 44 /* Siemens Tricore */ ++#define EM_ARC 45 /* Argonaut RISC Core */ ++#define EM_H8_300 46 /* Hitachi H8/300 */ ++#define EM_H8_300H 47 /* Hitachi H8/300H */ ++#define EM_H8S 48 /* Hitachi H8S */ ++#define EM_H8_500 49 /* Hitachi H8/500 */ ++#define EM_IA_64 50 /* Intel Merced */ ++#define EM_MIPS_X 51 /* Stanford MIPS-X */ ++#define EM_COLDFIRE 52 /* Motorola Coldfire */ ++#define EM_68HC12 53 /* Motorola M68HC12 */ ++#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/ ++#define EM_PCP 55 /* Siemens PCP */ ++#define EM_NCPU 56 /* Sony nCPU embeeded RISC */ ++#define EM_NDR1 57 /* Denso NDR1 microprocessor */ ++#define EM_STARCORE 58 /* Motorola Start*Core processor */ ++#define EM_ME16 59 /* Toyota ME16 processor */ ++#define EM_ST100 60 /* STMicroelectronic ST100 processor */ ++#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ ++#define EM_X86_64 62 /* AMD x86-64 architecture */ ++#define EM_PDSP 63 /* Sony DSP Processor */ ++ ++#define EM_FX66 66 /* Siemens FX66 microcontroller */ ++#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ ++#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ ++#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ ++#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ ++#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ ++#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */ ++#define EM_SVX 73 /* Silicon Graphics SVx */ ++#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */ ++#define EM_VAX 75 /* Digital VAX */ ++#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ ++#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */ ++#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */ ++#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */ ++#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */ ++#define EM_HUANY 81 /* Harvard University machine-independent object files */ ++#define EM_PRISM 82 /* SiTera Prism */ ++#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */ ++#define EM_FR30 84 /* Fujitsu FR30 */ ++#define EM_D10V 85 /* Mitsubishi D10V */ ++#define EM_D30V 86 /* Mitsubishi D30V */ ++#define EM_V850 87 /* NEC v850 */ ++#define EM_M32R 88 /* Mitsubishi M32R */ ++#define EM_MN10300 89 /* Matsushita MN10300 */ ++#define EM_MN10200 90 /* Matsushita MN10200 */ ++#define EM_PJ 91 /* picoJava */ ++#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ ++#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */ ++#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ ++#define EM_TILEPRO 188 /* Tilera TILEPro */ ++#define EM_TILEGX 191 /* Tilera TILE-Gx */ ++#define EM_NUM 192 ++ ++/* If it is necessary to assign new unofficial EM_* values, please ++ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the ++ chances of collision with official or non-GNU unofficial values. */ ++ ++#define EM_ALPHA 0x9026 ++ ++/* Legal values for e_version (version). */ ++ ++#define EV_NONE 0 /* Invalid ELF version */ ++#define EV_CURRENT 1 /* Current version */ ++#define EV_NUM 2 ++ ++/* Section header. */ ++ ++typedef struct ++{ ++ Elf32_Word sh_name; /* Section name (string tbl index) */ ++ Elf32_Word sh_type; /* Section type */ ++ Elf32_Word sh_flags; /* Section flags */ ++ Elf32_Addr sh_addr; /* Section virtual addr at execution */ ++ Elf32_Off sh_offset; /* Section file offset */ ++ Elf32_Word sh_size; /* Section size in bytes */ ++ Elf32_Word sh_link; /* Link to another section */ ++ Elf32_Word sh_info; /* Additional section information */ ++ Elf32_Word sh_addralign; /* Section alignment */ ++ Elf32_Word sh_entsize; /* Entry size if section holds table */ ++} Elf32_Shdr; ++ ++typedef struct ++{ ++ Elf64_Word sh_name; /* Section name (string tbl index) */ ++ Elf64_Word sh_type; /* Section type */ ++ Elf64_Xword sh_flags; /* Section flags */ ++ Elf64_Addr sh_addr; /* Section virtual addr at execution */ ++ Elf64_Off sh_offset; /* Section file offset */ ++ Elf64_Xword sh_size; /* Section size in bytes */ ++ Elf64_Word sh_link; /* Link to another section */ ++ Elf64_Word sh_info; /* Additional section information */ ++ Elf64_Xword sh_addralign; /* Section alignment */ ++ Elf64_Xword sh_entsize; /* Entry size if section holds table */ ++} Elf64_Shdr; ++ ++/* Special section indices. */ ++ ++#define SHN_UNDEF 0 /* Undefined section */ ++#define SHN_LORESERVE 0xff00 /* Start of reserved indices */ ++#define SHN_LOPROC 0xff00 /* Start of processor-specific */ ++#define SHN_BEFORE 0xff00 /* Order section before all others ++ (Solaris). */ ++#define SHN_AFTER 0xff01 /* Order section after all others ++ (Solaris). */ ++#define SHN_HIPROC 0xff1f /* End of processor-specific */ ++#define SHN_LOOS 0xff20 /* Start of OS-specific */ ++#define SHN_HIOS 0xff3f /* End of OS-specific */ ++#define SHN_ABS 0xfff1 /* Associated symbol is absolute */ ++#define SHN_COMMON 0xfff2 /* Associated symbol is common */ ++#define SHN_XINDEX 0xffff /* Index is in extra table. */ ++#define SHN_HIRESERVE 0xffff /* End of reserved indices */ ++ ++/* Legal values for sh_type (section type). */ ++ ++#define SHT_NULL 0 /* Section header table entry unused */ ++#define SHT_PROGBITS 1 /* Program data */ ++#define SHT_SYMTAB 2 /* Symbol table */ ++#define SHT_STRTAB 3 /* String table */ ++#define SHT_RELA 4 /* Relocation entries with addends */ ++#define SHT_HASH 5 /* Symbol hash table */ ++#define SHT_DYNAMIC 6 /* Dynamic linking information */ ++#define SHT_NOTE 7 /* Notes */ ++#define SHT_NOBITS 8 /* Program space with no data (bss) */ ++#define SHT_REL 9 /* Relocation entries, no addends */ ++#define SHT_SHLIB 10 /* Reserved */ ++#define SHT_DYNSYM 11 /* Dynamic linker symbol table */ ++#define SHT_INIT_ARRAY 14 /* Array of constructors */ ++#define SHT_FINI_ARRAY 15 /* Array of destructors */ ++#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */ ++#define SHT_GROUP 17 /* Section group */ ++#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */ ++#define SHT_NUM 19 /* Number of defined types. */ ++#define SHT_LOOS 0x60000000 /* Start OS-specific. */ ++#define SHT_GNU_ATTRIBUTES 0x6ffffff5 /* Object attributes. */ ++#define SHT_GNU_HASH 0x6ffffff6 /* GNU-style hash table. */ ++#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */ ++#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */ ++#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */ ++#define SHT_SUNW_move 0x6ffffffa ++#define SHT_SUNW_COMDAT 0x6ffffffb ++#define SHT_SUNW_syminfo 0x6ffffffc ++#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */ ++#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */ ++#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */ ++#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */ ++#define SHT_HIOS 0x6fffffff /* End OS-specific type */ ++#define SHT_LOPROC 0x70000000 /* Start of processor-specific */ ++#define SHT_HIPROC 0x7fffffff /* End of processor-specific */ ++#define SHT_LOUSER 0x80000000 /* Start of application-specific */ ++#define SHT_HIUSER 0x8fffffff /* End of application-specific */ ++ ++/* Legal values for sh_flags (section flags). */ ++ ++#define SHF_WRITE (1 << 0) /* Writable */ ++#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */ ++#define SHF_EXECINSTR (1 << 2) /* Executable */ ++#define SHF_MERGE (1 << 4) /* Might be merged */ ++#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */ ++#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */ ++#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */ ++#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling ++ required */ ++#define SHF_GROUP (1 << 9) /* Section is member of a group. */ ++#define SHF_TLS (1 << 10) /* Section hold thread-local data. */ ++#define SHF_MASKOS 0x0ff00000 /* OS-specific. */ ++#define SHF_MASKPROC 0xf0000000 /* Processor-specific */ ++#define SHF_ORDERED (1 << 30) /* Special ordering requirement ++ (Solaris). */ ++#define SHF_EXCLUDE (1 << 31) /* Section is excluded unless ++ referenced or allocated (Solaris).*/ ++ ++/* Section group handling. */ ++#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */ ++ ++/* Symbol table entry. */ ++ ++typedef struct ++{ ++ Elf32_Word st_name; /* Symbol name (string tbl index) */ ++ Elf32_Addr st_value; /* Symbol value */ ++ Elf32_Word st_size; /* Symbol size */ ++ unsigned char st_info; /* Symbol type and binding */ ++ unsigned char st_other; /* Symbol visibility */ ++ Elf32_Section st_shndx; /* Section index */ ++} Elf32_Sym; ++ ++typedef struct ++{ ++ Elf64_Word st_name; /* Symbol name (string tbl index) */ ++ unsigned char st_info; /* Symbol type and binding */ ++ unsigned char st_other; /* Symbol visibility */ ++ Elf64_Section st_shndx; /* Section index */ ++ Elf64_Addr st_value; /* Symbol value */ ++ Elf64_Xword st_size; /* Symbol size */ ++} Elf64_Sym; ++ ++/* The syminfo section if available contains additional information about ++ every dynamic symbol. */ ++ ++typedef struct ++{ ++ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */ ++ Elf32_Half si_flags; /* Per symbol flags */ ++} Elf32_Syminfo; ++ ++typedef struct ++{ ++ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */ ++ Elf64_Half si_flags; /* Per symbol flags */ ++} Elf64_Syminfo; ++ ++/* Possible values for si_boundto. */ ++#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */ ++#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */ ++#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */ ++ ++/* Possible bitmasks for si_flags. */ ++#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */ ++#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */ ++#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */ ++#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy ++ loaded */ ++/* Syminfo version values. */ ++#define SYMINFO_NONE 0 ++#define SYMINFO_CURRENT 1 ++#define SYMINFO_NUM 2 ++ ++ ++/* How to extract and insert information held in the st_info field. */ ++ ++#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4) ++#define ELF32_ST_TYPE(val) ((val) & 0xf) ++#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf)) ++ ++/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */ ++#define ELF64_ST_BIND(val) ELF32_ST_BIND (val) ++#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val) ++#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type)) ++ ++/* Legal values for ST_BIND subfield of st_info (symbol binding). */ ++ ++#define STB_LOCAL 0 /* Local symbol */ ++#define STB_GLOBAL 1 /* Global symbol */ ++#define STB_WEAK 2 /* Weak symbol */ ++#define STB_NUM 3 /* Number of defined types. */ ++#define STB_LOOS 10 /* Start of OS-specific */ ++#define STB_GNU_UNIQUE 10 /* Unique symbol. */ ++#define STB_HIOS 12 /* End of OS-specific */ ++#define STB_LOPROC 13 /* Start of processor-specific */ ++#define STB_HIPROC 15 /* End of processor-specific */ ++ ++/* Legal values for ST_TYPE subfield of st_info (symbol type). */ ++ ++#define STT_NOTYPE 0 /* Symbol type is unspecified */ ++#define STT_OBJECT 1 /* Symbol is a data object */ ++#define STT_FUNC 2 /* Symbol is a code object */ ++#define STT_SECTION 3 /* Symbol associated with a section */ ++#define STT_FILE 4 /* Symbol's name is file name */ ++#define STT_COMMON 5 /* Symbol is a common data object */ ++#define STT_TLS 6 /* Symbol is thread-local data object*/ ++#define STT_NUM 7 /* Number of defined types. */ ++#define STT_LOOS 10 /* Start of OS-specific */ ++#define STT_GNU_IFUNC 10 /* Symbol is indirect code object */ ++#define STT_HIOS 12 /* End of OS-specific */ ++#define STT_LOPROC 13 /* Start of processor-specific */ ++#define STT_HIPROC 15 /* End of processor-specific */ ++ ++ ++/* Symbol table indices are found in the hash buckets and chain table ++ of a symbol hash table section. This special index value indicates ++ the end of a chain, meaning no further symbols are found in that bucket. */ ++ ++#define STN_UNDEF 0 /* End of a chain. */ ++ ++ ++/* How to extract and insert information held in the st_other field. */ ++ ++#define ELF32_ST_VISIBILITY(o) ((o) & 0x03) ++ ++/* For ELF64 the definitions are the same. */ ++#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o) ++ ++/* Symbol visibility specification encoded in the st_other field. */ ++#define STV_DEFAULT 0 /* Default symbol visibility rules */ ++#define STV_INTERNAL 1 /* Processor specific hidden class */ ++#define STV_HIDDEN 2 /* Sym unavailable in other modules */ ++#define STV_PROTECTED 3 /* Not preemptible, not exported */ ++ ++ ++/* Relocation table entry without addend (in section of type SHT_REL). */ ++ ++typedef struct ++{ ++ Elf32_Addr r_offset; /* Address */ ++ Elf32_Word r_info; /* Relocation type and symbol index */ ++} Elf32_Rel; ++ ++/* I have seen two different definitions of the Elf64_Rel and ++ Elf64_Rela structures, so we'll leave them out until Novell (or ++ whoever) gets their act together. */ ++/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */ ++ ++typedef struct ++{ ++ Elf64_Addr r_offset; /* Address */ ++ Elf64_Xword r_info; /* Relocation type and symbol index */ ++} Elf64_Rel; ++ ++/* Relocation table entry with addend (in section of type SHT_RELA). */ ++ ++typedef struct ++{ ++ Elf32_Addr r_offset; /* Address */ ++ Elf32_Word r_info; /* Relocation type and symbol index */ ++ Elf32_Sword r_addend; /* Addend */ ++} Elf32_Rela; ++ ++typedef struct ++{ ++ Elf64_Addr r_offset; /* Address */ ++ Elf64_Xword r_info; /* Relocation type and symbol index */ ++ Elf64_Sxword r_addend; /* Addend */ ++} Elf64_Rela; ++ ++/* How to extract and insert information held in the r_info field. */ ++ ++#define ELF32_R_SYM(val) ((val) >> 8) ++#define ELF32_R_TYPE(val) ((val) & 0xff) ++#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff)) ++ ++#define ELF64_R_SYM(i) ((i) >> 32) ++#define ELF64_R_TYPE(i) ((i) & 0xffffffff) ++#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type)) ++ ++/* Program segment header. */ ++ ++typedef struct ++{ ++ Elf32_Word p_type; /* Segment type */ ++ Elf32_Off p_offset; /* Segment file offset */ ++ Elf32_Addr p_vaddr; /* Segment virtual address */ ++ Elf32_Addr p_paddr; /* Segment physical address */ ++ Elf32_Word p_filesz; /* Segment size in file */ ++ Elf32_Word p_memsz; /* Segment size in memory */ ++ Elf32_Word p_flags; /* Segment flags */ ++ Elf32_Word p_align; /* Segment alignment */ ++} Elf32_Phdr; ++ ++typedef struct ++{ ++ Elf64_Word p_type; /* Segment type */ ++ Elf64_Word p_flags; /* Segment flags */ ++ Elf64_Off p_offset; /* Segment file offset */ ++ Elf64_Addr p_vaddr; /* Segment virtual address */ ++ Elf64_Addr p_paddr; /* Segment physical address */ ++ Elf64_Xword p_filesz; /* Segment size in file */ ++ Elf64_Xword p_memsz; /* Segment size in memory */ ++ Elf64_Xword p_align; /* Segment alignment */ ++} Elf64_Phdr; ++ ++/* Special value for e_phnum. This indicates that the real number of ++ program headers is too large to fit into e_phnum. Instead the real ++ value is in the field sh_info of section 0. */ ++ ++#define PN_XNUM 0xffff ++ ++/* Legal values for p_type (segment type). */ ++ ++#define PT_NULL 0 /* Program header table entry unused */ ++#define PT_LOAD 1 /* Loadable program segment */ ++#define PT_DYNAMIC 2 /* Dynamic linking information */ ++#define PT_INTERP 3 /* Program interpreter */ ++#define PT_NOTE 4 /* Auxiliary information */ ++#define PT_SHLIB 5 /* Reserved */ ++#define PT_PHDR 6 /* Entry for header table itself */ ++#define PT_TLS 7 /* Thread-local storage segment */ ++#define PT_NUM 8 /* Number of defined types */ ++#define PT_LOOS 0x60000000 /* Start of OS-specific */ ++#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */ ++#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */ ++#define PT_GNU_RELRO 0x6474e552 /* Read-only after relocation */ ++#define PT_LOSUNW 0x6ffffffa ++#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */ ++#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */ ++#define PT_HISUNW 0x6fffffff ++#define PT_HIOS 0x6fffffff /* End of OS-specific */ ++#define PT_LOPROC 0x70000000 /* Start of processor-specific */ ++#define PT_HIPROC 0x7fffffff /* End of processor-specific */ ++ ++/* Legal values for p_flags (segment flags). */ ++ ++#define PF_X (1 << 0) /* Segment is executable */ ++#define PF_W (1 << 1) /* Segment is writable */ ++#define PF_R (1 << 2) /* Segment is readable */ ++#define PF_MASKOS 0x0ff00000 /* OS-specific */ ++#define PF_MASKPROC 0xf0000000 /* Processor-specific */ ++ ++/* Legal values for note segment descriptor types for core files. */ ++ ++#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */ ++#define NT_FPREGSET 2 /* Contains copy of fpregset struct */ ++#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */ ++#define NT_PRXREG 4 /* Contains copy of prxregset struct */ ++#define NT_TASKSTRUCT 4 /* Contains copy of task structure */ ++#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */ ++#define NT_AUXV 6 /* Contains copy of auxv array */ ++#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */ ++#define NT_ASRS 8 /* Contains copy of asrset struct */ ++#define NT_PSTATUS 10 /* Contains copy of pstatus struct */ ++#define NT_PSINFO 13 /* Contains copy of psinfo struct */ ++#define NT_PRCRED 14 /* Contains copy of prcred struct */ ++#define NT_UTSNAME 15 /* Contains copy of utsname struct */ ++#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */ ++#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */ ++#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct */ ++#define NT_PRXFPREG 0x46e62b7f /* Contains copy of user_fxsr_struct */ ++#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ ++#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ ++#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ ++#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ ++#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ ++#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ ++ ++/* Legal values for the note segment descriptor types for object files. */ ++ ++#define NT_VERSION 1 /* Contains a version string. */ ++ ++ ++/* Dynamic section entry. */ ++ ++typedef struct ++{ ++ Elf32_Sword d_tag; /* Dynamic entry type */ ++ union ++ { ++ Elf32_Word d_val; /* Integer value */ ++ Elf32_Addr d_ptr; /* Address value */ ++ } d_un; ++} Elf32_Dyn; ++ ++typedef struct ++{ ++ Elf64_Sxword d_tag; /* Dynamic entry type */ ++ union ++ { ++ Elf64_Xword d_val; /* Integer value */ ++ Elf64_Addr d_ptr; /* Address value */ ++ } d_un; ++} Elf64_Dyn; ++ ++/* Legal values for d_tag (dynamic entry type). */ ++ ++#define DT_NULL 0 /* Marks end of dynamic section */ ++#define DT_NEEDED 1 /* Name of needed library */ ++#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */ ++#define DT_PLTGOT 3 /* Processor defined value */ ++#define DT_HASH 4 /* Address of symbol hash table */ ++#define DT_STRTAB 5 /* Address of string table */ ++#define DT_SYMTAB 6 /* Address of symbol table */ ++#define DT_RELA 7 /* Address of Rela relocs */ ++#define DT_RELASZ 8 /* Total size of Rela relocs */ ++#define DT_RELAENT 9 /* Size of one Rela reloc */ ++#define DT_STRSZ 10 /* Size of string table */ ++#define DT_SYMENT 11 /* Size of one symbol table entry */ ++#define DT_INIT 12 /* Address of init function */ ++#define DT_FINI 13 /* Address of termination function */ ++#define DT_SONAME 14 /* Name of shared object */ ++#define DT_RPATH 15 /* Library search path (deprecated) */ ++#define DT_SYMBOLIC 16 /* Start symbol search here */ ++#define DT_REL 17 /* Address of Rel relocs */ ++#define DT_RELSZ 18 /* Total size of Rel relocs */ ++#define DT_RELENT 19 /* Size of one Rel reloc */ ++#define DT_PLTREL 20 /* Type of reloc in PLT */ ++#define DT_DEBUG 21 /* For debugging; unspecified */ ++#define DT_TEXTREL 22 /* Reloc might modify .text */ ++#define DT_JMPREL 23 /* Address of PLT relocs */ ++#define DT_BIND_NOW 24 /* Process relocations of object */ ++#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */ ++#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */ ++#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */ ++#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */ ++#define DT_RUNPATH 29 /* Library search path */ ++#define DT_FLAGS 30 /* Flags for the object being loaded */ ++#define DT_ENCODING 32 /* Start of encoded range */ ++#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/ ++#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */ ++#define DT_NUM 34 /* Number used */ ++#define DT_LOOS 0x6000000d /* Start of OS-specific */ ++#define DT_HIOS 0x6ffff000 /* End of OS-specific */ ++#define DT_LOPROC 0x70000000 /* Start of processor-specific */ ++#define DT_HIPROC 0x7fffffff /* End of processor-specific */ ++#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */ ++ ++/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the ++ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's ++ approach. */ ++#define DT_VALRNGLO 0x6ffffd00 ++#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */ ++#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */ ++#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */ ++#define DT_CHECKSUM 0x6ffffdf8 ++#define DT_PLTPADSZ 0x6ffffdf9 ++#define DT_MOVEENT 0x6ffffdfa ++#define DT_MOVESZ 0x6ffffdfb ++#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */ ++#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting ++ the following DT_* entry. */ ++#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */ ++#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */ ++#define DT_VALRNGHI 0x6ffffdff ++#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */ ++#define DT_VALNUM 12 ++ ++/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the ++ Dyn.d_un.d_ptr field of the Elf*_Dyn structure. ++ ++ If any adjustment is made to the ELF object after it has been ++ built these entries will need to be adjusted. */ ++#define DT_ADDRRNGLO 0x6ffffe00 ++#define DT_GNU_HASH 0x6ffffef5 /* GNU-style hash table. */ ++#define DT_TLSDESC_PLT 0x6ffffef6 ++#define DT_TLSDESC_GOT 0x6ffffef7 ++#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */ ++#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */ ++#define DT_CONFIG 0x6ffffefa /* Configuration information. */ ++#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */ ++#define DT_AUDIT 0x6ffffefc /* Object auditing. */ ++#define DT_PLTPAD 0x6ffffefd /* PLT padding. */ ++#define DT_MOVETAB 0x6ffffefe /* Move table. */ ++#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */ ++#define DT_ADDRRNGHI 0x6ffffeff ++#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */ ++#define DT_ADDRNUM 11 ++ ++/* The versioning entry types. The next are defined as part of the ++ GNU extension. */ ++#define DT_VERSYM 0x6ffffff0 ++ ++#define DT_RELACOUNT 0x6ffffff9 ++#define DT_RELCOUNT 0x6ffffffa ++ ++/* These were chosen by Sun. */ ++#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */ ++#define DT_VERDEF 0x6ffffffc /* Address of version definition ++ table */ ++#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */ ++#define DT_VERNEED 0x6ffffffe /* Address of table with needed ++ versions */ ++#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */ ++#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */ ++#define DT_VERSIONTAGNUM 16 ++ ++/* Sun added these machine-independent extensions in the "processor-specific" ++ range. Be compatible. */ ++#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */ ++#define DT_FILTER 0x7fffffff /* Shared object to get values from */ ++#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1) ++#define DT_EXTRANUM 3 ++ ++/* Values of `d_un.d_val' in the DT_FLAGS entry. */ ++#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */ ++#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */ ++#define DF_TEXTREL 0x00000004 /* Object contains text relocations */ ++#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */ ++#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */ ++ ++/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1 ++ entry in the dynamic section. */ ++#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */ ++#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */ ++#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */ ++#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/ ++#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/ ++#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/ ++#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */ ++#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */ ++#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */ ++#define DF_1_TRANS 0x00000200 ++#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */ ++#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */ ++#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */ ++#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/ ++#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */ ++#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */ ++#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */ ++ ++/* Flags for the feature selection in DT_FEATURE_1. */ ++#define DTF_1_PARINIT 0x00000001 ++#define DTF_1_CONFEXP 0x00000002 ++ ++/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */ ++#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */ ++#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not ++ generally available. */ ++ ++/* Version definition sections. */ ++ ++typedef struct ++{ ++ Elf32_Half vd_version; /* Version revision */ ++ Elf32_Half vd_flags; /* Version information */ ++ Elf32_Half vd_ndx; /* Version Index */ ++ Elf32_Half vd_cnt; /* Number of associated aux entries */ ++ Elf32_Word vd_hash; /* Version name hash value */ ++ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */ ++ Elf32_Word vd_next; /* Offset in bytes to next verdef ++ entry */ ++} Elf32_Verdef; ++ ++typedef struct ++{ ++ Elf64_Half vd_version; /* Version revision */ ++ Elf64_Half vd_flags; /* Version information */ ++ Elf64_Half vd_ndx; /* Version Index */ ++ Elf64_Half vd_cnt; /* Number of associated aux entries */ ++ Elf64_Word vd_hash; /* Version name hash value */ ++ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */ ++ Elf64_Word vd_next; /* Offset in bytes to next verdef ++ entry */ ++} Elf64_Verdef; ++ ++ ++/* Legal values for vd_version (version revision). */ ++#define VER_DEF_NONE 0 /* No version */ ++#define VER_DEF_CURRENT 1 /* Current version */ ++#define VER_DEF_NUM 2 /* Given version number */ ++ ++/* Legal values for vd_flags (version information flags). */ ++#define VER_FLG_BASE 0x1 /* Version definition of file itself */ ++#define VER_FLG_WEAK 0x2 /* Weak version identifier */ ++ ++/* Versym symbol index values. */ ++#define VER_NDX_LOCAL 0 /* Symbol is local. */ ++#define VER_NDX_GLOBAL 1 /* Symbol is global. */ ++#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */ ++#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */ ++ ++/* Auxialiary version information. */ ++ ++typedef struct ++{ ++ Elf32_Word vda_name; /* Version or dependency names */ ++ Elf32_Word vda_next; /* Offset in bytes to next verdaux ++ entry */ ++} Elf32_Verdaux; ++ ++typedef struct ++{ ++ Elf64_Word vda_name; /* Version or dependency names */ ++ Elf64_Word vda_next; /* Offset in bytes to next verdaux ++ entry */ ++} Elf64_Verdaux; ++ ++ ++/* Version dependency section. */ ++ ++typedef struct ++{ ++ Elf32_Half vn_version; /* Version of structure */ ++ Elf32_Half vn_cnt; /* Number of associated aux entries */ ++ Elf32_Word vn_file; /* Offset of filename for this ++ dependency */ ++ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */ ++ Elf32_Word vn_next; /* Offset in bytes to next verneed ++ entry */ ++} Elf32_Verneed; ++ ++typedef struct ++{ ++ Elf64_Half vn_version; /* Version of structure */ ++ Elf64_Half vn_cnt; /* Number of associated aux entries */ ++ Elf64_Word vn_file; /* Offset of filename for this ++ dependency */ ++ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */ ++ Elf64_Word vn_next; /* Offset in bytes to next verneed ++ entry */ ++} Elf64_Verneed; ++ ++ ++/* Legal values for vn_version (version revision). */ ++#define VER_NEED_NONE 0 /* No version */ ++#define VER_NEED_CURRENT 1 /* Current version */ ++#define VER_NEED_NUM 2 /* Given version number */ ++ ++/* Auxiliary needed version information. */ ++ ++typedef struct ++{ ++ Elf32_Word vna_hash; /* Hash value of dependency name */ ++ Elf32_Half vna_flags; /* Dependency specific information */ ++ Elf32_Half vna_other; /* Unused */ ++ Elf32_Word vna_name; /* Dependency name string offset */ ++ Elf32_Word vna_next; /* Offset in bytes to next vernaux ++ entry */ ++} Elf32_Vernaux; ++ ++typedef struct ++{ ++ Elf64_Word vna_hash; /* Hash value of dependency name */ ++ Elf64_Half vna_flags; /* Dependency specific information */ ++ Elf64_Half vna_other; /* Unused */ ++ Elf64_Word vna_name; /* Dependency name string offset */ ++ Elf64_Word vna_next; /* Offset in bytes to next vernaux ++ entry */ ++} Elf64_Vernaux; ++ ++ ++/* Legal values for vna_flags. */ ++#define VER_FLG_WEAK 0x2 /* Weak version identifier */ ++ ++ ++/* Auxiliary vector. */ ++ ++/* This vector is normally only used by the program interpreter. The ++ usual definition in an ABI supplement uses the name auxv_t. The ++ vector is not usually defined in a standard file, but it ++ can't hurt. We rename it to avoid conflicts. The sizes of these ++ types are an arrangement between the exec server and the program ++ interpreter, so we don't fully specify them here. */ ++ ++typedef struct ++{ ++ uint32_t a_type; /* Entry type */ ++ union ++ { ++ uint32_t a_val; /* Integer value */ ++ /* We use to have pointer elements added here. We cannot do that, ++ though, since it does not work when using 32-bit definitions ++ on 64-bit platforms and vice versa. */ ++ } a_un; ++} Elf32_auxv_t; ++ ++typedef struct ++{ ++ uint64_t a_type; /* Entry type */ ++ union ++ { ++ uint64_t a_val; /* Integer value */ ++ /* We use to have pointer elements added here. We cannot do that, ++ though, since it does not work when using 32-bit definitions ++ on 64-bit platforms and vice versa. */ ++ } a_un; ++} Elf64_auxv_t; ++ ++/* Legal values for a_type (entry type). */ ++ ++#define AT_NULL 0 /* End of vector */ ++#define AT_IGNORE 1 /* Entry should be ignored */ ++#define AT_EXECFD 2 /* File descriptor of program */ ++#define AT_PHDR 3 /* Program headers for program */ ++#define AT_PHENT 4 /* Size of program header entry */ ++#define AT_PHNUM 5 /* Number of program headers */ ++#define AT_PAGESZ 6 /* System page size */ ++#define AT_BASE 7 /* Base address of interpreter */ ++#define AT_FLAGS 8 /* Flags */ ++#define AT_ENTRY 9 /* Entry point of program */ ++#define AT_NOTELF 10 /* Program is not ELF */ ++#define AT_UID 11 /* Real uid */ ++#define AT_EUID 12 /* Effective uid */ ++#define AT_GID 13 /* Real gid */ ++#define AT_EGID 14 /* Effective gid */ ++#define AT_CLKTCK 17 /* Frequency of times() */ ++ ++/* Some more special a_type values describing the hardware. */ ++#define AT_PLATFORM 15 /* String identifying platform. */ ++#define AT_HWCAP 16 /* Machine dependent hints about ++ processor capabilities. */ ++ ++/* This entry gives some information about the FPU initialization ++ performed by the kernel. */ ++#define AT_FPUCW 18 /* Used FPU control word. */ ++ ++/* Cache block sizes. */ ++#define AT_DCACHEBSIZE 19 /* Data cache block size. */ ++#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */ ++#define AT_UCACHEBSIZE 21 /* Unified cache block size. */ ++ ++/* A special ignored value for PPC, used by the kernel to control the ++ interpretation of the AUXV. Must be > 16. */ ++#define AT_IGNOREPPC 22 /* Entry should be ignored. */ ++ ++#define AT_SECURE 23 /* Boolean, was exec setuid-like? */ ++ ++#define AT_BASE_PLATFORM 24 /* String identifying real platforms.*/ ++ ++#define AT_RANDOM 25 /* Address of 16 random bytes. */ ++ ++#define AT_EXECFN 31 /* Filename of executable. */ ++ ++/* Pointer to the global system page used for system calls and other ++ nice things. */ ++#define AT_SYSINFO 32 ++#define AT_SYSINFO_EHDR 33 ++ ++/* Shapes of the caches. Bits 0-3 contains associativity; bits 4-7 contains ++ log2 of line size; mask those to get cache size. */ ++#define AT_L1I_CACHESHAPE 34 ++#define AT_L1D_CACHESHAPE 35 ++#define AT_L2_CACHESHAPE 36 ++#define AT_L3_CACHESHAPE 37 ++ ++/* Note section contents. Each entry in the note section begins with ++ a header of a fixed form. */ ++ ++typedef struct ++{ ++ Elf32_Word n_namesz; /* Length of the note's name. */ ++ Elf32_Word n_descsz; /* Length of the note's descriptor. */ ++ Elf32_Word n_type; /* Type of the note. */ ++} Elf32_Nhdr; ++ ++typedef struct ++{ ++ Elf64_Word n_namesz; /* Length of the note's name. */ ++ Elf64_Word n_descsz; /* Length of the note's descriptor. */ ++ Elf64_Word n_type; /* Type of the note. */ ++} Elf64_Nhdr; ++ ++/* Known names of notes. */ ++ ++/* Solaris entries in the note section have this name. */ ++#define ELF_NOTE_SOLARIS "SUNW Solaris" ++ ++/* Note entries for GNU systems have this name. */ ++#define ELF_NOTE_GNU "GNU" ++ ++ ++/* Defined types of notes for Solaris. */ ++ ++/* Value of descriptor (one word) is desired pagesize for the binary. */ ++#define ELF_NOTE_PAGESIZE_HINT 1 ++ ++ ++/* Defined note types for GNU systems. */ ++ ++/* ABI information. The descriptor consists of words: ++ word 0: OS descriptor ++ word 1: major version of the ABI ++ word 2: minor version of the ABI ++ word 3: subminor version of the ABI ++*/ ++#define NT_GNU_ABI_TAG 1 ++#define ELF_NOTE_ABI NT_GNU_ABI_TAG /* Old name. */ ++ ++/* Known OSes. These values can appear in word 0 of an ++ NT_GNU_ABI_TAG note section entry. */ ++#define ELF_NOTE_OS_LINUX 0 ++#define ELF_NOTE_OS_GNU 1 ++#define ELF_NOTE_OS_SOLARIS2 2 ++#define ELF_NOTE_OS_FREEBSD 3 ++ ++/* Synthetic hwcap information. The descriptor begins with two words: ++ word 0: number of entries ++ word 1: bitmask of enabled entries ++ Then follow variable-length entries, one byte followed by a ++ '\0'-terminated hwcap name string. The byte gives the bit ++ number to test if enabled, (1U << bit) & bitmask. */ ++#define NT_GNU_HWCAP 2 ++ ++/* Build ID bits as generated by ld --build-id. ++ The descriptor consists of any nonzero number of bytes. */ ++#define NT_GNU_BUILD_ID 3 ++ ++/* Version note generated by GNU gold containing a version string. */ ++#define NT_GNU_GOLD_VERSION 4 ++ ++ ++/* Move records. */ ++typedef struct ++{ ++ Elf32_Xword m_value; /* Symbol value. */ ++ Elf32_Word m_info; /* Size and index. */ ++ Elf32_Word m_poffset; /* Symbol offset. */ ++ Elf32_Half m_repeat; /* Repeat count. */ ++ Elf32_Half m_stride; /* Stride info. */ ++} Elf32_Move; ++ ++typedef struct ++{ ++ Elf64_Xword m_value; /* Symbol value. */ ++ Elf64_Xword m_info; /* Size and index. */ ++ Elf64_Xword m_poffset; /* Symbol offset. */ ++ Elf64_Half m_repeat; /* Repeat count. */ ++ Elf64_Half m_stride; /* Stride info. */ ++} Elf64_Move; ++ ++/* Macro to construct move records. */ ++#define ELF32_M_SYM(info) ((info) >> 8) ++#define ELF32_M_SIZE(info) ((unsigned char) (info)) ++#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size)) ++ ++#define ELF64_M_SYM(info) ELF32_M_SYM (info) ++#define ELF64_M_SIZE(info) ELF32_M_SIZE (info) ++#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size) ++ ++ ++/* Motorola 68k specific definitions. */ ++ ++/* Values for Elf32_Ehdr.e_flags. */ ++#define EF_CPU32 0x00810000 ++ ++/* m68k relocs. */ ++ ++#define R_68K_NONE 0 /* No reloc */ ++#define R_68K_32 1 /* Direct 32 bit */ ++#define R_68K_16 2 /* Direct 16 bit */ ++#define R_68K_8 3 /* Direct 8 bit */ ++#define R_68K_PC32 4 /* PC relative 32 bit */ ++#define R_68K_PC16 5 /* PC relative 16 bit */ ++#define R_68K_PC8 6 /* PC relative 8 bit */ ++#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */ ++#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */ ++#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */ ++#define R_68K_GOT32O 10 /* 32 bit GOT offset */ ++#define R_68K_GOT16O 11 /* 16 bit GOT offset */ ++#define R_68K_GOT8O 12 /* 8 bit GOT offset */ ++#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */ ++#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */ ++#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */ ++#define R_68K_PLT32O 16 /* 32 bit PLT offset */ ++#define R_68K_PLT16O 17 /* 16 bit PLT offset */ ++#define R_68K_PLT8O 18 /* 8 bit PLT offset */ ++#define R_68K_COPY 19 /* Copy symbol at runtime */ ++#define R_68K_GLOB_DAT 20 /* Create GOT entry */ ++#define R_68K_JMP_SLOT 21 /* Create PLT entry */ ++#define R_68K_RELATIVE 22 /* Adjust by program base */ ++#define R_68K_TLS_GD32 25 /* 32 bit GOT offset for GD */ ++#define R_68K_TLS_GD16 26 /* 16 bit GOT offset for GD */ ++#define R_68K_TLS_GD8 27 /* 8 bit GOT offset for GD */ ++#define R_68K_TLS_LDM32 28 /* 32 bit GOT offset for LDM */ ++#define R_68K_TLS_LDM16 29 /* 16 bit GOT offset for LDM */ ++#define R_68K_TLS_LDM8 30 /* 8 bit GOT offset for LDM */ ++#define R_68K_TLS_LDO32 31 /* 32 bit module-relative offset */ ++#define R_68K_TLS_LDO16 32 /* 16 bit module-relative offset */ ++#define R_68K_TLS_LDO8 33 /* 8 bit module-relative offset */ ++#define R_68K_TLS_IE32 34 /* 32 bit GOT offset for IE */ ++#define R_68K_TLS_IE16 35 /* 16 bit GOT offset for IE */ ++#define R_68K_TLS_IE8 36 /* 8 bit GOT offset for IE */ ++#define R_68K_TLS_LE32 37 /* 32 bit offset relative to ++ static TLS block */ ++#define R_68K_TLS_LE16 38 /* 16 bit offset relative to ++ static TLS block */ ++#define R_68K_TLS_LE8 39 /* 8 bit offset relative to ++ static TLS block */ ++#define R_68K_TLS_DTPMOD32 40 /* 32 bit module number */ ++#define R_68K_TLS_DTPREL32 41 /* 32 bit module-relative offset */ ++#define R_68K_TLS_TPREL32 42 /* 32 bit TP-relative offset */ ++/* Keep this the last entry. */ ++#define R_68K_NUM 43 ++ ++/* Intel 80386 specific definitions. */ ++ ++/* i386 relocs. */ ++ ++#define R_386_NONE 0 /* No reloc */ ++#define R_386_32 1 /* Direct 32 bit */ ++#define R_386_PC32 2 /* PC relative 32 bit */ ++#define R_386_GOT32 3 /* 32 bit GOT entry */ ++#define R_386_PLT32 4 /* 32 bit PLT address */ ++#define R_386_COPY 5 /* Copy symbol at runtime */ ++#define R_386_GLOB_DAT 6 /* Create GOT entry */ ++#define R_386_JMP_SLOT 7 /* Create PLT entry */ ++#define R_386_RELATIVE 8 /* Adjust by program base */ ++#define R_386_GOTOFF 9 /* 32 bit offset to GOT */ ++#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */ ++#define R_386_32PLT 11 ++#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */ ++#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS ++ block offset */ ++#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block ++ offset */ ++#define R_386_TLS_LE 17 /* Offset relative to static TLS ++ block */ ++#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of ++ general dynamic thread local data */ ++#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of ++ local dynamic thread local data ++ in LE code */ ++#define R_386_16 20 ++#define R_386_PC16 21 ++#define R_386_8 22 ++#define R_386_PC8 23 ++#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic ++ thread local data */ ++#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */ ++#define R_386_TLS_GD_CALL 26 /* Relocation for call to ++ __tls_get_addr() */ ++#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */ ++#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic ++ thread local data in LE code */ ++#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */ ++#define R_386_TLS_LDM_CALL 30 /* Relocation for call to ++ __tls_get_addr() in LDM code */ ++#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */ ++#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */ ++#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS ++ block offset */ ++#define R_386_TLS_LE_32 34 /* Negated offset relative to static ++ TLS block */ ++#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */ ++#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */ ++#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */ ++/* 38? */ ++#define R_386_TLS_GOTDESC 39 /* GOT offset for TLS descriptor. */ ++#define R_386_TLS_DESC_CALL 40 /* Marker of call through TLS ++ descriptor for ++ relaxation. */ ++#define R_386_TLS_DESC 41 /* TLS descriptor containing ++ pointer to code and to ++ argument, returning the TLS ++ offset for the symbol. */ ++#define R_386_IRELATIVE 42 /* Adjust indirectly by program base */ ++/* Keep this the last entry. */ ++#define R_386_NUM 43 ++ ++/* SUN SPARC specific definitions. */ ++ ++/* Legal values for ST_TYPE subfield of st_info (symbol type). */ ++ ++#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */ ++ ++/* Values for Elf64_Ehdr.e_flags. */ ++ ++#define EF_SPARCV9_MM 3 ++#define EF_SPARCV9_TSO 0 ++#define EF_SPARCV9_PSO 1 ++#define EF_SPARCV9_RMO 2 ++#define EF_SPARC_LEDATA 0x800000 /* little endian data */ ++#define EF_SPARC_EXT_MASK 0xFFFF00 ++#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */ ++#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */ ++#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */ ++#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */ ++ ++/* SPARC relocs. */ ++ ++#define R_SPARC_NONE 0 /* No reloc */ ++#define R_SPARC_8 1 /* Direct 8 bit */ ++#define R_SPARC_16 2 /* Direct 16 bit */ ++#define R_SPARC_32 3 /* Direct 32 bit */ ++#define R_SPARC_DISP8 4 /* PC relative 8 bit */ ++#define R_SPARC_DISP16 5 /* PC relative 16 bit */ ++#define R_SPARC_DISP32 6 /* PC relative 32 bit */ ++#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */ ++#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */ ++#define R_SPARC_HI22 9 /* High 22 bit */ ++#define R_SPARC_22 10 /* Direct 22 bit */ ++#define R_SPARC_13 11 /* Direct 13 bit */ ++#define R_SPARC_LO10 12 /* Truncated 10 bit */ ++#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */ ++#define R_SPARC_GOT13 14 /* 13 bit GOT entry */ ++#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */ ++#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */ ++#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */ ++#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */ ++#define R_SPARC_COPY 19 /* Copy symbol at runtime */ ++#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */ ++#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */ ++#define R_SPARC_RELATIVE 22 /* Adjust by program base */ ++#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */ ++ ++/* Additional Sparc64 relocs. */ ++ ++#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */ ++#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */ ++#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */ ++#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */ ++#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */ ++#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */ ++#define R_SPARC_10 30 /* Direct 10 bit */ ++#define R_SPARC_11 31 /* Direct 11 bit */ ++#define R_SPARC_64 32 /* Direct 64 bit */ ++#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */ ++#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */ ++#define R_SPARC_HM10 35 /* High middle 10 bits of ... */ ++#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */ ++#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */ ++#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */ ++#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */ ++#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */ ++#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */ ++#define R_SPARC_GLOB_JMP 42 /* was part of v9 ABI but was removed */ ++#define R_SPARC_7 43 /* Direct 7 bit */ ++#define R_SPARC_5 44 /* Direct 5 bit */ ++#define R_SPARC_6 45 /* Direct 6 bit */ ++#define R_SPARC_DISP64 46 /* PC relative 64 bit */ ++#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */ ++#define R_SPARC_HIX22 48 /* High 22 bit complemented */ ++#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */ ++#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */ ++#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */ ++#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */ ++#define R_SPARC_REGISTER 53 /* Global register usage */ ++#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */ ++#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */ ++#define R_SPARC_TLS_GD_HI22 56 ++#define R_SPARC_TLS_GD_LO10 57 ++#define R_SPARC_TLS_GD_ADD 58 ++#define R_SPARC_TLS_GD_CALL 59 ++#define R_SPARC_TLS_LDM_HI22 60 ++#define R_SPARC_TLS_LDM_LO10 61 ++#define R_SPARC_TLS_LDM_ADD 62 ++#define R_SPARC_TLS_LDM_CALL 63 ++#define R_SPARC_TLS_LDO_HIX22 64 ++#define R_SPARC_TLS_LDO_LOX10 65 ++#define R_SPARC_TLS_LDO_ADD 66 ++#define R_SPARC_TLS_IE_HI22 67 ++#define R_SPARC_TLS_IE_LO10 68 ++#define R_SPARC_TLS_IE_LD 69 ++#define R_SPARC_TLS_IE_LDX 70 ++#define R_SPARC_TLS_IE_ADD 71 ++#define R_SPARC_TLS_LE_HIX22 72 ++#define R_SPARC_TLS_LE_LOX10 73 ++#define R_SPARC_TLS_DTPMOD32 74 ++#define R_SPARC_TLS_DTPMOD64 75 ++#define R_SPARC_TLS_DTPOFF32 76 ++#define R_SPARC_TLS_DTPOFF64 77 ++#define R_SPARC_TLS_TPOFF32 78 ++#define R_SPARC_TLS_TPOFF64 79 ++#define R_SPARC_GOTDATA_HIX22 80 ++#define R_SPARC_GOTDATA_LOX10 81 ++#define R_SPARC_GOTDATA_OP_HIX22 82 ++#define R_SPARC_GOTDATA_OP_LOX10 83 ++#define R_SPARC_GOTDATA_OP 84 ++#define R_SPARC_H34 85 ++#define R_SPARC_SIZE32 86 ++#define R_SPARC_SIZE64 87 ++#define R_SPARC_WDISP10 88 ++#define R_SPARC_JMP_IREL 248 ++#define R_SPARC_IRELATIVE 249 ++#define R_SPARC_GNU_VTINHERIT 250 ++#define R_SPARC_GNU_VTENTRY 251 ++#define R_SPARC_REV32 252 ++/* Keep this the last entry. */ ++#define R_SPARC_NUM 253 ++ ++/* For Sparc64, legal values for d_tag of Elf64_Dyn. */ ++ ++#define DT_SPARC_REGISTER 0x70000001 ++#define DT_SPARC_NUM 2 ++ ++/* MIPS R3000 specific definitions. */ ++ ++/* Legal values for e_flags field of Elf32_Ehdr. */ ++ ++#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */ ++#define EF_MIPS_PIC 2 /* Contains PIC code */ ++#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */ ++#define EF_MIPS_XGOT 8 ++#define EF_MIPS_64BIT_WHIRL 16 ++#define EF_MIPS_ABI2 32 ++#define EF_MIPS_ABI_ON32 64 ++#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */ ++ ++/* Legal values for MIPS architecture level. */ ++ ++#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ ++#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ ++#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ ++#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ ++#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ ++#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ ++#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ ++ ++/* The following are non-official names and should not be used. */ ++ ++#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ ++#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ ++#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ ++#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ ++#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ ++#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */ ++#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */ ++ ++/* Special section indices. */ ++ ++#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */ ++#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ ++#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ ++#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ ++#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ ++ ++/* Legal values for sh_type field of Elf32_Shdr. */ ++ ++#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */ ++#define SHT_MIPS_MSYM 0x70000001 ++#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */ ++#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */ ++#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */ ++#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/ ++#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */ ++#define SHT_MIPS_PACKAGE 0x70000007 ++#define SHT_MIPS_PACKSYM 0x70000008 ++#define SHT_MIPS_RELD 0x70000009 ++#define SHT_MIPS_IFACE 0x7000000b ++#define SHT_MIPS_CONTENT 0x7000000c ++#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */ ++#define SHT_MIPS_SHDR 0x70000010 ++#define SHT_MIPS_FDESC 0x70000011 ++#define SHT_MIPS_EXTSYM 0x70000012 ++#define SHT_MIPS_DENSE 0x70000013 ++#define SHT_MIPS_PDESC 0x70000014 ++#define SHT_MIPS_LOCSYM 0x70000015 ++#define SHT_MIPS_AUXSYM 0x70000016 ++#define SHT_MIPS_OPTSYM 0x70000017 ++#define SHT_MIPS_LOCSTR 0x70000018 ++#define SHT_MIPS_LINE 0x70000019 ++#define SHT_MIPS_RFDESC 0x7000001a ++#define SHT_MIPS_DELTASYM 0x7000001b ++#define SHT_MIPS_DELTAINST 0x7000001c ++#define SHT_MIPS_DELTACLASS 0x7000001d ++#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */ ++#define SHT_MIPS_DELTADECL 0x7000001f ++#define SHT_MIPS_SYMBOL_LIB 0x70000020 ++#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */ ++#define SHT_MIPS_TRANSLATE 0x70000022 ++#define SHT_MIPS_PIXIE 0x70000023 ++#define SHT_MIPS_XLATE 0x70000024 ++#define SHT_MIPS_XLATE_DEBUG 0x70000025 ++#define SHT_MIPS_WHIRL 0x70000026 ++#define SHT_MIPS_EH_REGION 0x70000027 ++#define SHT_MIPS_XLATE_OLD 0x70000028 ++#define SHT_MIPS_PDR_EXCEPTION 0x70000029 ++ ++/* Legal values for sh_flags field of Elf32_Shdr. */ ++ ++#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */ ++#define SHF_MIPS_MERGE 0x20000000 ++#define SHF_MIPS_ADDR 0x40000000 ++#define SHF_MIPS_STRINGS 0x80000000 ++#define SHF_MIPS_NOSTRIP 0x08000000 ++#define SHF_MIPS_LOCAL 0x04000000 ++#define SHF_MIPS_NAMES 0x02000000 ++#define SHF_MIPS_NODUPE 0x01000000 ++ ++ ++/* Symbol tables. */ ++ ++/* MIPS specific values for `st_other'. */ ++#define STO_MIPS_DEFAULT 0x0 ++#define STO_MIPS_INTERNAL 0x1 ++#define STO_MIPS_HIDDEN 0x2 ++#define STO_MIPS_PROTECTED 0x3 ++#define STO_MIPS_PLT 0x8 ++#define STO_MIPS_SC_ALIGN_UNUSED 0xff ++ ++/* MIPS specific values for `st_info'. */ ++#define STB_MIPS_SPLIT_COMMON 13 ++ ++/* Entries found in sections of type SHT_MIPS_GPTAB. */ ++ ++typedef union ++{ ++ struct ++ { ++ Elf32_Word gt_current_g_value; /* -G value used for compilation */ ++ Elf32_Word gt_unused; /* Not used */ ++ } gt_header; /* First entry in section */ ++ struct ++ { ++ Elf32_Word gt_g_value; /* If this value were used for -G */ ++ Elf32_Word gt_bytes; /* This many bytes would be used */ ++ } gt_entry; /* Subsequent entries in section */ ++} Elf32_gptab; ++ ++/* Entry found in sections of type SHT_MIPS_REGINFO. */ ++ ++typedef struct ++{ ++ Elf32_Word ri_gprmask; /* General registers used */ ++ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */ ++ Elf32_Sword ri_gp_value; /* $gp register value */ ++} Elf32_RegInfo; ++ ++/* Entries found in sections of type SHT_MIPS_OPTIONS. */ ++ ++typedef struct ++{ ++ unsigned char kind; /* Determines interpretation of the ++ variable part of descriptor. */ ++ unsigned char size; /* Size of descriptor, including header. */ ++ Elf32_Section section; /* Section header index of section affected, ++ 0 for global options. */ ++ Elf32_Word info; /* Kind-specific information. */ ++} Elf_Options; ++ ++/* Values for `kind' field in Elf_Options. */ ++ ++#define ODK_NULL 0 /* Undefined. */ ++#define ODK_REGINFO 1 /* Register usage information. */ ++#define ODK_EXCEPTIONS 2 /* Exception processing options. */ ++#define ODK_PAD 3 /* Section padding options. */ ++#define ODK_HWPATCH 4 /* Hardware workarounds performed */ ++#define ODK_FILL 5 /* record the fill value used by the linker. */ ++#define ODK_TAGS 6 /* reserve space for desktop tools to write. */ ++#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */ ++#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */ ++ ++/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */ ++ ++#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */ ++#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */ ++#define OEX_PAGE0 0x10000 /* page zero must be mapped. */ ++#define OEX_SMM 0x20000 /* Force sequential memory mode? */ ++#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */ ++#define OEX_PRECISEFP OEX_FPDBUG ++#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */ ++ ++#define OEX_FPU_INVAL 0x10 ++#define OEX_FPU_DIV0 0x08 ++#define OEX_FPU_OFLO 0x04 ++#define OEX_FPU_UFLO 0x02 ++#define OEX_FPU_INEX 0x01 ++ ++/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */ ++ ++#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */ ++#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */ ++#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */ ++#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */ ++ ++#define OPAD_PREFIX 0x1 ++#define OPAD_POSTFIX 0x2 ++#define OPAD_SYMBOL 0x4 ++ ++/* Entry found in `.options' section. */ ++ ++typedef struct ++{ ++ Elf32_Word hwp_flags1; /* Extra flags. */ ++ Elf32_Word hwp_flags2; /* Extra flags. */ ++} Elf_Options_Hw; ++ ++/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */ ++ ++#define OHWA0_R4KEOP_CHECKED 0x00000001 ++#define OHWA1_R4KEOP_CLEAN 0x00000002 ++ ++/* MIPS relocs. */ ++ ++#define R_MIPS_NONE 0 /* No reloc */ ++#define R_MIPS_16 1 /* Direct 16 bit */ ++#define R_MIPS_32 2 /* Direct 32 bit */ ++#define R_MIPS_REL32 3 /* PC relative 32 bit */ ++#define R_MIPS_26 4 /* Direct 26 bit shifted */ ++#define R_MIPS_HI16 5 /* High 16 bit */ ++#define R_MIPS_LO16 6 /* Low 16 bit */ ++#define R_MIPS_GPREL16 7 /* GP relative 16 bit */ ++#define R_MIPS_LITERAL 8 /* 16 bit literal entry */ ++#define R_MIPS_GOT16 9 /* 16 bit GOT entry */ ++#define R_MIPS_PC16 10 /* PC relative 16 bit */ ++#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */ ++#define R_MIPS_GPREL32 12 /* GP relative 32 bit */ ++ ++#define R_MIPS_SHIFT5 16 ++#define R_MIPS_SHIFT6 17 ++#define R_MIPS_64 18 ++#define R_MIPS_GOT_DISP 19 ++#define R_MIPS_GOT_PAGE 20 ++#define R_MIPS_GOT_OFST 21 ++#define R_MIPS_GOT_HI16 22 ++#define R_MIPS_GOT_LO16 23 ++#define R_MIPS_SUB 24 ++#define R_MIPS_INSERT_A 25 ++#define R_MIPS_INSERT_B 26 ++#define R_MIPS_DELETE 27 ++#define R_MIPS_HIGHER 28 ++#define R_MIPS_HIGHEST 29 ++#define R_MIPS_CALL_HI16 30 ++#define R_MIPS_CALL_LO16 31 ++#define R_MIPS_SCN_DISP 32 ++#define R_MIPS_REL16 33 ++#define R_MIPS_ADD_IMMEDIATE 34 ++#define R_MIPS_PJUMP 35 ++#define R_MIPS_RELGOT 36 ++#define R_MIPS_JALR 37 ++#define R_MIPS_TLS_DTPMOD32 38 /* Module number 32 bit */ ++#define R_MIPS_TLS_DTPREL32 39 /* Module-relative offset 32 bit */ ++#define R_MIPS_TLS_DTPMOD64 40 /* Module number 64 bit */ ++#define R_MIPS_TLS_DTPREL64 41 /* Module-relative offset 64 bit */ ++#define R_MIPS_TLS_GD 42 /* 16 bit GOT offset for GD */ ++#define R_MIPS_TLS_LDM 43 /* 16 bit GOT offset for LDM */ ++#define R_MIPS_TLS_DTPREL_HI16 44 /* Module-relative offset, high 16 bits */ ++#define R_MIPS_TLS_DTPREL_LO16 45 /* Module-relative offset, low 16 bits */ ++#define R_MIPS_TLS_GOTTPREL 46 /* 16 bit GOT offset for IE */ ++#define R_MIPS_TLS_TPREL32 47 /* TP-relative offset, 32 bit */ ++#define R_MIPS_TLS_TPREL64 48 /* TP-relative offset, 64 bit */ ++#define R_MIPS_TLS_TPREL_HI16 49 /* TP-relative offset, high 16 bits */ ++#define R_MIPS_TLS_TPREL_LO16 50 /* TP-relative offset, low 16 bits */ ++#define R_MIPS_GLOB_DAT 51 ++#define R_MIPS_COPY 126 ++#define R_MIPS_JUMP_SLOT 127 ++/* Keep this the last entry. */ ++#define R_MIPS_NUM 128 ++ ++/* Legal values for p_type field of Elf32_Phdr. */ ++ ++#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */ ++#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */ ++#define PT_MIPS_OPTIONS 0x70000002 ++ ++/* Special program header types. */ ++ ++#define PF_MIPS_LOCAL 0x10000000 ++ ++/* Legal values for d_tag field of Elf32_Dyn. */ ++ ++#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */ ++#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */ ++#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */ ++#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */ ++#define DT_MIPS_FLAGS 0x70000005 /* Flags */ ++#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */ ++#define DT_MIPS_MSYM 0x70000007 ++#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */ ++#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */ ++#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */ ++#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */ ++#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */ ++#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */ ++#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */ ++#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */ ++#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */ ++#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */ ++#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */ ++#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in ++ DT_MIPS_DELTA_CLASS. */ ++#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */ ++#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in ++ DT_MIPS_DELTA_INSTANCE. */ ++#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */ ++#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in ++ DT_MIPS_DELTA_RELOC. */ ++#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta ++ relocations refer to. */ ++#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in ++ DT_MIPS_DELTA_SYM. */ ++#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the ++ class declaration. */ ++#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in ++ DT_MIPS_DELTA_CLASSSYM. */ ++#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */ ++#define DT_MIPS_PIXIE_INIT 0x70000023 ++#define DT_MIPS_SYMBOL_LIB 0x70000024 ++#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025 ++#define DT_MIPS_LOCAL_GOTIDX 0x70000026 ++#define DT_MIPS_HIDDEN_GOTIDX 0x70000027 ++#define DT_MIPS_PROTECTED_GOTIDX 0x70000028 ++#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */ ++#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */ ++#define DT_MIPS_DYNSTR_ALIGN 0x7000002b ++#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */ ++#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve ++ function stored in GOT. */ ++#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added ++ by rld on dlopen() calls. */ ++#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */ ++#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */ ++#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */ ++/* The address of .got.plt in an executable using the new non-PIC ABI. */ ++#define DT_MIPS_PLTGOT 0x70000032 ++/* The base of the PLT in an executable using the new non-PIC ABI if that ++ PLT is writable. For a non-writable PLT, this is omitted or has a zero ++ value. */ ++#define DT_MIPS_RWPLT 0x70000034 ++#define DT_MIPS_NUM 0x35 ++ ++/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */ ++ ++#define RHF_NONE 0 /* No flags */ ++#define RHF_QUICKSTART (1 << 0) /* Use quickstart */ ++#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */ ++#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */ ++#define RHF_NO_MOVE (1 << 3) ++#define RHF_SGI_ONLY (1 << 4) ++#define RHF_GUARANTEE_INIT (1 << 5) ++#define RHF_DELTA_C_PLUS_PLUS (1 << 6) ++#define RHF_GUARANTEE_START_INIT (1 << 7) ++#define RHF_PIXIE (1 << 8) ++#define RHF_DEFAULT_DELAY_LOAD (1 << 9) ++#define RHF_REQUICKSTART (1 << 10) ++#define RHF_REQUICKSTARTED (1 << 11) ++#define RHF_CORD (1 << 12) ++#define RHF_NO_UNRES_UNDEF (1 << 13) ++#define RHF_RLD_ORDER_SAFE (1 << 14) ++ ++/* Entries found in sections of type SHT_MIPS_LIBLIST. */ ++ ++typedef struct ++{ ++ Elf32_Word l_name; /* Name (string table index) */ ++ Elf32_Word l_time_stamp; /* Timestamp */ ++ Elf32_Word l_checksum; /* Checksum */ ++ Elf32_Word l_version; /* Interface version */ ++ Elf32_Word l_flags; /* Flags */ ++} Elf32_Lib; ++ ++typedef struct ++{ ++ Elf64_Word l_name; /* Name (string table index) */ ++ Elf64_Word l_time_stamp; /* Timestamp */ ++ Elf64_Word l_checksum; /* Checksum */ ++ Elf64_Word l_version; /* Interface version */ ++ Elf64_Word l_flags; /* Flags */ ++} Elf64_Lib; ++ ++ ++/* Legal values for l_flags. */ ++ ++#define LL_NONE 0 ++#define LL_EXACT_MATCH (1 << 0) /* Require exact match */ ++#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */ ++#define LL_REQUIRE_MINOR (1 << 2) ++#define LL_EXPORTS (1 << 3) ++#define LL_DELAY_LOAD (1 << 4) ++#define LL_DELTA (1 << 5) ++ ++/* Entries found in sections of type SHT_MIPS_CONFLICT. */ ++ ++typedef Elf32_Addr Elf32_Conflict; ++ ++ ++/* HPPA specific definitions. */ ++ ++/* Legal values for e_flags field of Elf32_Ehdr. */ ++ ++#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */ ++#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */ ++#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */ ++#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */ ++#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch ++ prediction. */ ++#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */ ++#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */ ++ ++/* Defined values for `e_flags & EF_PARISC_ARCH' are: */ ++ ++#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */ ++#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */ ++#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */ ++ ++/* Additional section indeces. */ ++ ++#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared ++ symbols in ANSI C. */ ++#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */ ++ ++/* Legal values for sh_type field of Elf32_Shdr. */ ++ ++#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */ ++#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */ ++#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */ ++ ++/* Legal values for sh_flags field of Elf32_Shdr. */ ++ ++#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */ ++#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */ ++#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */ ++ ++/* Legal values for ST_TYPE subfield of st_info (symbol type). */ ++ ++#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */ ++ ++#define STT_HP_OPAQUE (STT_LOOS + 0x1) ++#define STT_HP_STUB (STT_LOOS + 0x2) ++ ++/* HPPA relocs. */ ++ ++#define R_PARISC_NONE 0 /* No reloc. */ ++#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */ ++#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */ ++#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */ ++#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */ ++#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */ ++#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */ ++#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */ ++#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */ ++#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */ ++#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */ ++#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */ ++#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */ ++#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */ ++#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */ ++#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */ ++#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */ ++#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */ ++#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */ ++#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */ ++#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */ ++#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */ ++#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */ ++#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */ ++#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */ ++#define R_PARISC_FPTR64 64 /* 64 bits function address. */ ++#define R_PARISC_PLABEL32 65 /* 32 bits function address. */ ++#define R_PARISC_PLABEL21L 66 /* Left 21 bits of fdesc address. */ ++#define R_PARISC_PLABEL14R 70 /* Right 14 bits of fdesc address. */ ++#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */ ++#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */ ++#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */ ++#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */ ++#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */ ++#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */ ++#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */ ++#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */ ++#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */ ++#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */ ++#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */ ++#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */ ++#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */ ++#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */ ++#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */ ++#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */ ++#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */ ++#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */ ++#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */ ++#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */ ++#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */ ++#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */ ++#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */ ++#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */ ++#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */ ++#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */ ++#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */ ++#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */ ++#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */ ++#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */ ++#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */ ++#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */ ++#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */ ++#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */ ++#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */ ++#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */ ++#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */ ++#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */ ++#define R_PARISC_LORESERVE 128 ++#define R_PARISC_COPY 128 /* Copy relocation. */ ++#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */ ++#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */ ++#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */ ++#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */ ++#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */ ++#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */ ++#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/ ++#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */ ++#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */ ++#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */ ++#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */ ++#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */ ++#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */ ++#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */ ++#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */ ++#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/ ++#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/ ++#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */ ++#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */ ++#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */ ++#define R_PARISC_GNU_VTENTRY 232 ++#define R_PARISC_GNU_VTINHERIT 233 ++#define R_PARISC_TLS_GD21L 234 /* GD 21-bit left. */ ++#define R_PARISC_TLS_GD14R 235 /* GD 14-bit right. */ ++#define R_PARISC_TLS_GDCALL 236 /* GD call to __t_g_a. */ ++#define R_PARISC_TLS_LDM21L 237 /* LD module 21-bit left. */ ++#define R_PARISC_TLS_LDM14R 238 /* LD module 14-bit right. */ ++#define R_PARISC_TLS_LDMCALL 239 /* LD module call to __t_g_a. */ ++#define R_PARISC_TLS_LDO21L 240 /* LD offset 21-bit left. */ ++#define R_PARISC_TLS_LDO14R 241 /* LD offset 14-bit right. */ ++#define R_PARISC_TLS_DTPMOD32 242 /* DTP module 32-bit. */ ++#define R_PARISC_TLS_DTPMOD64 243 /* DTP module 64-bit. */ ++#define R_PARISC_TLS_DTPOFF32 244 /* DTP offset 32-bit. */ ++#define R_PARISC_TLS_DTPOFF64 245 /* DTP offset 32-bit. */ ++#define R_PARISC_TLS_LE21L R_PARISC_TPREL21L ++#define R_PARISC_TLS_LE14R R_PARISC_TPREL14R ++#define R_PARISC_TLS_IE21L R_PARISC_LTOFF_TP21L ++#define R_PARISC_TLS_IE14R R_PARISC_LTOFF_TP14R ++#define R_PARISC_TLS_TPREL32 R_PARISC_TPREL32 ++#define R_PARISC_TLS_TPREL64 R_PARISC_TPREL64 ++#define R_PARISC_HIRESERVE 255 ++ ++/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */ ++ ++#define PT_HP_TLS (PT_LOOS + 0x0) ++#define PT_HP_CORE_NONE (PT_LOOS + 0x1) ++#define PT_HP_CORE_VERSION (PT_LOOS + 0x2) ++#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3) ++#define PT_HP_CORE_COMM (PT_LOOS + 0x4) ++#define PT_HP_CORE_PROC (PT_LOOS + 0x5) ++#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6) ++#define PT_HP_CORE_STACK (PT_LOOS + 0x7) ++#define PT_HP_CORE_SHM (PT_LOOS + 0x8) ++#define PT_HP_CORE_MMF (PT_LOOS + 0x9) ++#define PT_HP_PARALLEL (PT_LOOS + 0x10) ++#define PT_HP_FASTBIND (PT_LOOS + 0x11) ++#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12) ++#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13) ++#define PT_HP_STACK (PT_LOOS + 0x14) ++ ++#define PT_PARISC_ARCHEXT 0x70000000 ++#define PT_PARISC_UNWIND 0x70000001 ++ ++/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */ ++ ++#define PF_PARISC_SBP 0x08000000 ++ ++#define PF_HP_PAGE_SIZE 0x00100000 ++#define PF_HP_FAR_SHARED 0x00200000 ++#define PF_HP_NEAR_SHARED 0x00400000 ++#define PF_HP_CODE 0x01000000 ++#define PF_HP_MODIFY 0x02000000 ++#define PF_HP_LAZYSWAP 0x04000000 ++#define PF_HP_SBP 0x08000000 ++ ++ ++/* Alpha specific definitions. */ ++ ++/* Legal values for e_flags field of Elf64_Ehdr. */ ++ ++#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */ ++#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */ ++ ++/* Legal values for sh_type field of Elf64_Shdr. */ ++ ++/* These two are primerily concerned with ECOFF debugging info. */ ++#define SHT_ALPHA_DEBUG 0x70000001 ++#define SHT_ALPHA_REGINFO 0x70000002 ++ ++/* Legal values for sh_flags field of Elf64_Shdr. */ ++ ++#define SHF_ALPHA_GPREL 0x10000000 ++ ++/* Legal values for st_other field of Elf64_Sym. */ ++#define STO_ALPHA_NOPV 0x80 /* No PV required. */ ++#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */ ++ ++/* Alpha relocs. */ ++ ++#define R_ALPHA_NONE 0 /* No reloc */ ++#define R_ALPHA_REFLONG 1 /* Direct 32 bit */ ++#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */ ++#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */ ++#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */ ++#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */ ++#define R_ALPHA_GPDISP 6 /* Add displacement to GP */ ++#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */ ++#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */ ++#define R_ALPHA_SREL16 9 /* PC relative 16 bit */ ++#define R_ALPHA_SREL32 10 /* PC relative 32 bit */ ++#define R_ALPHA_SREL64 11 /* PC relative 64 bit */ ++#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */ ++#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */ ++#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */ ++#define R_ALPHA_COPY 24 /* Copy symbol at runtime */ ++#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */ ++#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */ ++#define R_ALPHA_RELATIVE 27 /* Adjust by program base */ ++#define R_ALPHA_TLS_GD_HI 28 ++#define R_ALPHA_TLSGD 29 ++#define R_ALPHA_TLS_LDM 30 ++#define R_ALPHA_DTPMOD64 31 ++#define R_ALPHA_GOTDTPREL 32 ++#define R_ALPHA_DTPREL64 33 ++#define R_ALPHA_DTPRELHI 34 ++#define R_ALPHA_DTPRELLO 35 ++#define R_ALPHA_DTPREL16 36 ++#define R_ALPHA_GOTTPREL 37 ++#define R_ALPHA_TPREL64 38 ++#define R_ALPHA_TPRELHI 39 ++#define R_ALPHA_TPRELLO 40 ++#define R_ALPHA_TPREL16 41 ++/* Keep this the last entry. */ ++#define R_ALPHA_NUM 46 ++ ++/* Magic values of the LITUSE relocation addend. */ ++#define LITUSE_ALPHA_ADDR 0 ++#define LITUSE_ALPHA_BASE 1 ++#define LITUSE_ALPHA_BYTOFF 2 ++#define LITUSE_ALPHA_JSR 3 ++#define LITUSE_ALPHA_TLS_GD 4 ++#define LITUSE_ALPHA_TLS_LDM 5 ++ ++/* Legal values for d_tag of Elf64_Dyn. */ ++#define DT_ALPHA_PLTRO (DT_LOPROC + 0) ++#define DT_ALPHA_NUM 1 ++ ++/* PowerPC specific declarations */ ++ ++/* Values for Elf32/64_Ehdr.e_flags. */ ++#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */ ++ ++/* Cygnus local bits below */ ++#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/ ++#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib ++ flag */ ++ ++/* PowerPC relocations defined by the ABIs */ ++#define R_PPC_NONE 0 ++#define R_PPC_ADDR32 1 /* 32bit absolute address */ ++#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ ++#define R_PPC_ADDR16 3 /* 16bit absolute address */ ++#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ ++#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ ++#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ ++#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ ++#define R_PPC_ADDR14_BRTAKEN 8 ++#define R_PPC_ADDR14_BRNTAKEN 9 ++#define R_PPC_REL24 10 /* PC relative 26 bit */ ++#define R_PPC_REL14 11 /* PC relative 16 bit */ ++#define R_PPC_REL14_BRTAKEN 12 ++#define R_PPC_REL14_BRNTAKEN 13 ++#define R_PPC_GOT16 14 ++#define R_PPC_GOT16_LO 15 ++#define R_PPC_GOT16_HI 16 ++#define R_PPC_GOT16_HA 17 ++#define R_PPC_PLTREL24 18 ++#define R_PPC_COPY 19 ++#define R_PPC_GLOB_DAT 20 ++#define R_PPC_JMP_SLOT 21 ++#define R_PPC_RELATIVE 22 ++#define R_PPC_LOCAL24PC 23 ++#define R_PPC_UADDR32 24 ++#define R_PPC_UADDR16 25 ++#define R_PPC_REL32 26 ++#define R_PPC_PLT32 27 ++#define R_PPC_PLTREL32 28 ++#define R_PPC_PLT16_LO 29 ++#define R_PPC_PLT16_HI 30 ++#define R_PPC_PLT16_HA 31 ++#define R_PPC_SDAREL16 32 ++#define R_PPC_SECTOFF 33 ++#define R_PPC_SECTOFF_LO 34 ++#define R_PPC_SECTOFF_HI 35 ++#define R_PPC_SECTOFF_HA 36 ++ ++/* PowerPC relocations defined for the TLS access ABI. */ ++#define R_PPC_TLS 67 /* none (sym+add)@tls */ ++#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ ++#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ ++#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ ++#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ ++#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ ++#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ ++#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ ++#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ ++#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ ++#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ ++#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ ++#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ ++#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ ++#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ ++#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ ++#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ ++#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ ++#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ ++#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ ++#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ ++#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ ++#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ ++#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ ++#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ ++#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ ++#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ ++#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ ++ ++/* The remaining relocs are from the Embedded ELF ABI, and are not ++ in the SVR4 ELF ABI. */ ++#define R_PPC_EMB_NADDR32 101 ++#define R_PPC_EMB_NADDR16 102 ++#define R_PPC_EMB_NADDR16_LO 103 ++#define R_PPC_EMB_NADDR16_HI 104 ++#define R_PPC_EMB_NADDR16_HA 105 ++#define R_PPC_EMB_SDAI16 106 ++#define R_PPC_EMB_SDA2I16 107 ++#define R_PPC_EMB_SDA2REL 108 ++#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */ ++#define R_PPC_EMB_MRKREF 110 ++#define R_PPC_EMB_RELSEC16 111 ++#define R_PPC_EMB_RELST_LO 112 ++#define R_PPC_EMB_RELST_HI 113 ++#define R_PPC_EMB_RELST_HA 114 ++#define R_PPC_EMB_BIT_FLD 115 ++#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */ ++ ++/* Diab tool relocations. */ ++#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */ ++#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */ ++#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */ ++#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */ ++#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */ ++#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */ ++ ++/* GNU extension to support local ifunc. */ ++#define R_PPC_IRELATIVE 248 ++ ++/* GNU relocs used in PIC code sequences. */ ++#define R_PPC_REL16 249 /* half16 (sym+add-.) */ ++#define R_PPC_REL16_LO 250 /* half16 (sym+add-.)@l */ ++#define R_PPC_REL16_HI 251 /* half16 (sym+add-.)@h */ ++#define R_PPC_REL16_HA 252 /* half16 (sym+add-.)@ha */ ++ ++/* This is a phony reloc to handle any old fashioned TOC16 references ++ that may still be in object files. */ ++#define R_PPC_TOC16 255 ++ ++/* PowerPC specific values for the Dyn d_tag field. */ ++#define DT_PPC_GOT (DT_LOPROC + 0) ++#define DT_PPC_NUM 1 ++ ++/* PowerPC64 relocations defined by the ABIs */ ++#define R_PPC64_NONE R_PPC_NONE ++#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */ ++#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */ ++#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */ ++#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */ ++#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */ ++#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ ++#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */ ++#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN ++#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN ++#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */ ++#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */ ++#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN ++#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN ++#define R_PPC64_GOT16 R_PPC_GOT16 ++#define R_PPC64_GOT16_LO R_PPC_GOT16_LO ++#define R_PPC64_GOT16_HI R_PPC_GOT16_HI ++#define R_PPC64_GOT16_HA R_PPC_GOT16_HA ++ ++#define R_PPC64_COPY R_PPC_COPY ++#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT ++#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT ++#define R_PPC64_RELATIVE R_PPC_RELATIVE ++ ++#define R_PPC64_UADDR32 R_PPC_UADDR32 ++#define R_PPC64_UADDR16 R_PPC_UADDR16 ++#define R_PPC64_REL32 R_PPC_REL32 ++#define R_PPC64_PLT32 R_PPC_PLT32 ++#define R_PPC64_PLTREL32 R_PPC_PLTREL32 ++#define R_PPC64_PLT16_LO R_PPC_PLT16_LO ++#define R_PPC64_PLT16_HI R_PPC_PLT16_HI ++#define R_PPC64_PLT16_HA R_PPC_PLT16_HA ++ ++#define R_PPC64_SECTOFF R_PPC_SECTOFF ++#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO ++#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI ++#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA ++#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */ ++#define R_PPC64_ADDR64 38 /* doubleword64 S + A */ ++#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */ ++#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */ ++#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */ ++#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */ ++#define R_PPC64_UADDR64 43 /* doubleword64 S + A */ ++#define R_PPC64_REL64 44 /* doubleword64 S + A - P */ ++#define R_PPC64_PLT64 45 /* doubleword64 L + A */ ++#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */ ++#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */ ++#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */ ++#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */ ++#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */ ++#define R_PPC64_TOC 51 /* doubleword64 .TOC */ ++#define R_PPC64_PLTGOT16 52 /* half16* M + A */ ++#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */ ++#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */ ++#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */ ++ ++#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */ ++#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */ ++#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */ ++#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */ ++#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */ ++#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */ ++#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */ ++#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */ ++#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */ ++#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */ ++#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */ ++ ++/* PowerPC64 relocations defined for the TLS access ABI. */ ++#define R_PPC64_TLS 67 /* none (sym+add)@tls */ ++#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ ++#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ ++#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ ++#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ ++#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ ++#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ ++#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ ++#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ ++#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ ++#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ ++#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ ++#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ ++#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ ++#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ ++#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ ++#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ ++#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ ++#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ ++#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ ++#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ ++#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ ++#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ ++#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ ++#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ ++#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ ++#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ ++#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ ++#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ ++#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ ++#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ ++#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ ++#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ ++#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ ++#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ ++#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ ++#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ ++#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ ++#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ ++#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ ++ ++/* GNU extension to support local ifunc. */ ++#define R_PPC64_JMP_IREL 247 ++#define R_PPC64_IRELATIVE 248 ++#define R_PPC64_REL16 249 /* half16 (sym+add-.) */ ++#define R_PPC64_REL16_LO 250 /* half16 (sym+add-.)@l */ ++#define R_PPC64_REL16_HI 251 /* half16 (sym+add-.)@h */ ++#define R_PPC64_REL16_HA 252 /* half16 (sym+add-.)@ha */ ++ ++/* PowerPC64 specific values for the Dyn d_tag field. */ ++#define DT_PPC64_GLINK (DT_LOPROC + 0) ++#define DT_PPC64_OPD (DT_LOPROC + 1) ++#define DT_PPC64_OPDSZ (DT_LOPROC + 2) ++#define DT_PPC64_NUM 3 ++ ++ ++/* ARM specific declarations */ ++ ++/* Processor specific flags for the ELF header e_flags field. */ ++#define EF_ARM_RELEXEC 0x01 ++#define EF_ARM_HASENTRY 0x02 ++#define EF_ARM_INTERWORK 0x04 ++#define EF_ARM_APCS_26 0x08 ++#define EF_ARM_APCS_FLOAT 0x10 ++#define EF_ARM_PIC 0x20 ++#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */ ++#define EF_ARM_NEW_ABI 0x80 ++#define EF_ARM_OLD_ABI 0x100 ++#define EF_ARM_SOFT_FLOAT 0x200 ++#define EF_ARM_VFP_FLOAT 0x400 ++#define EF_ARM_MAVERICK_FLOAT 0x800 ++ ++ ++/* Other constants defined in the ARM ELF spec. version B-01. */ ++/* NB. These conflict with values defined above. */ ++#define EF_ARM_SYMSARESORTED 0x04 ++#define EF_ARM_DYNSYMSUSESEGIDX 0x08 ++#define EF_ARM_MAPSYMSFIRST 0x10 ++#define EF_ARM_EABIMASK 0XFF000000 ++ ++/* Constants defined in AAELF. */ ++#define EF_ARM_BE8 0x00800000 ++#define EF_ARM_LE8 0x00400000 ++ ++#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK) ++#define EF_ARM_EABI_UNKNOWN 0x00000000 ++#define EF_ARM_EABI_VER1 0x01000000 ++#define EF_ARM_EABI_VER2 0x02000000 ++#define EF_ARM_EABI_VER3 0x03000000 ++#define EF_ARM_EABI_VER4 0x04000000 ++#define EF_ARM_EABI_VER5 0x05000000 ++ ++/* Additional symbol types for Thumb. */ ++#define STT_ARM_TFUNC STT_LOPROC /* A Thumb function. */ ++#define STT_ARM_16BIT STT_HIPROC /* A Thumb label. */ ++ ++/* ARM-specific values for sh_flags */ ++#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */ ++#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined ++ in the input to a link step. */ ++ ++/* ARM-specific program header flags */ ++#define PF_ARM_SB 0x10000000 /* Segment contains the location ++ addressed by the static base. */ ++#define PF_ARM_PI 0x20000000 /* Position-independent segment. */ ++#define PF_ARM_ABS 0x40000000 /* Absolute segment. */ ++ ++/* Processor specific values for the Phdr p_type field. */ ++#define PT_ARM_EXIDX (PT_LOPROC + 1) /* ARM unwind segment. */ ++ ++/* Processor specific values for the Shdr sh_type field. */ ++#define SHT_ARM_EXIDX (SHT_LOPROC + 1) /* ARM unwind section. */ ++#define SHT_ARM_PREEMPTMAP (SHT_LOPROC + 2) /* Preemption details. */ ++#define SHT_ARM_ATTRIBUTES (SHT_LOPROC + 3) /* ARM attributes section. */ ++ ++ ++/* ARM relocs. */ ++ ++#define R_ARM_NONE 0 /* No reloc */ ++#define R_ARM_PC24 1 /* PC relative 26 bit branch */ ++#define R_ARM_ABS32 2 /* Direct 32 bit */ ++#define R_ARM_REL32 3 /* PC relative 32 bit */ ++#define R_ARM_PC13 4 ++#define R_ARM_ABS16 5 /* Direct 16 bit */ ++#define R_ARM_ABS12 6 /* Direct 12 bit */ ++#define R_ARM_THM_ABS5 7 ++#define R_ARM_ABS8 8 /* Direct 8 bit */ ++#define R_ARM_SBREL32 9 ++#define R_ARM_THM_PC22 10 ++#define R_ARM_THM_PC8 11 ++#define R_ARM_AMP_VCALL9 12 ++#define R_ARM_SWI24 13 /* Obsolete static relocation. */ ++#define R_ARM_TLS_DESC 13 /* Dynamic relocation. */ ++#define R_ARM_THM_SWI8 14 ++#define R_ARM_XPC25 15 ++#define R_ARM_THM_XPC22 16 ++#define R_ARM_TLS_DTPMOD32 17 /* ID of module containing symbol */ ++#define R_ARM_TLS_DTPOFF32 18 /* Offset in TLS block */ ++#define R_ARM_TLS_TPOFF32 19 /* Offset in static TLS block */ ++#define R_ARM_COPY 20 /* Copy symbol at runtime */ ++#define R_ARM_GLOB_DAT 21 /* Create GOT entry */ ++#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */ ++#define R_ARM_RELATIVE 23 /* Adjust by program base */ ++#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */ ++#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */ ++#define R_ARM_GOT32 26 /* 32 bit GOT entry */ ++#define R_ARM_PLT32 27 /* 32 bit PLT address */ ++#define R_ARM_ALU_PCREL_7_0 32 ++#define R_ARM_ALU_PCREL_15_8 33 ++#define R_ARM_ALU_PCREL_23_15 34 ++#define R_ARM_LDR_SBREL_11_0 35 ++#define R_ARM_ALU_SBREL_19_12 36 ++#define R_ARM_ALU_SBREL_27_20 37 ++#define R_ARM_TLS_GOTDESC 90 ++#define R_ARM_TLS_CALL 91 ++#define R_ARM_TLS_DESCSEQ 92 ++#define R_ARM_THM_TLS_CALL 93 ++#define R_ARM_GNU_VTENTRY 100 ++#define R_ARM_GNU_VTINHERIT 101 ++#define R_ARM_THM_PC11 102 /* thumb unconditional branch */ ++#define R_ARM_THM_PC9 103 /* thumb conditional branch */ ++#define R_ARM_TLS_GD32 104 /* PC-rel 32 bit for global dynamic ++ thread local data */ ++#define R_ARM_TLS_LDM32 105 /* PC-rel 32 bit for local dynamic ++ thread local data */ ++#define R_ARM_TLS_LDO32 106 /* 32 bit offset relative to TLS ++ block */ ++#define R_ARM_TLS_IE32 107 /* PC-rel 32 bit for GOT entry of ++ static TLS block offset */ ++#define R_ARM_TLS_LE32 108 /* 32 bit offset relative to static ++ TLS block */ ++#define R_ARM_THM_TLS_DESCSEQ 129 ++#define R_ARM_IRELATIVE 160 ++#define R_ARM_RXPC25 249 ++#define R_ARM_RSBREL32 250 ++#define R_ARM_THM_RPC22 251 ++#define R_ARM_RREL32 252 ++#define R_ARM_RABS22 253 ++#define R_ARM_RPC24 254 ++#define R_ARM_RBASE 255 ++/* Keep this the last entry. */ ++#define R_ARM_NUM 256 ++ ++/* IA-64 specific declarations. */ ++ ++/* Processor specific flags for the Ehdr e_flags field. */ ++#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */ ++#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */ ++#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */ ++ ++/* Processor specific values for the Phdr p_type field. */ ++#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */ ++#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */ ++#define PT_IA_64_HP_OPT_ANOT (PT_LOOS + 0x12) ++#define PT_IA_64_HP_HSL_ANOT (PT_LOOS + 0x13) ++#define PT_IA_64_HP_STACK (PT_LOOS + 0x14) ++ ++/* Processor specific flags for the Phdr p_flags field. */ ++#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */ ++ ++/* Processor specific values for the Shdr sh_type field. */ ++#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */ ++#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */ ++ ++/* Processor specific flags for the Shdr sh_flags field. */ ++#define SHF_IA_64_SHORT 0x10000000 /* section near gp */ ++#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */ ++ ++/* Processor specific values for the Dyn d_tag field. */ ++#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0) ++#define DT_IA_64_NUM 1 ++ ++/* IA-64 relocations. */ ++#define R_IA64_NONE 0x00 /* none */ ++#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */ ++#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */ ++#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */ ++#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */ ++#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */ ++#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */ ++#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */ ++#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */ ++#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */ ++#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */ ++#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */ ++#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */ ++#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */ ++#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */ ++#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */ ++#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */ ++#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */ ++#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */ ++#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */ ++#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */ ++#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */ ++#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */ ++#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */ ++#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */ ++#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */ ++#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */ ++#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */ ++#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */ ++#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */ ++#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */ ++#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */ ++#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */ ++#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */ ++#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */ ++#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */ ++#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */ ++#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */ ++#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */ ++#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */ ++#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */ ++#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */ ++#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */ ++#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */ ++#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */ ++#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */ ++#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */ ++#define R_IA64_REL32MSB 0x6c /* data 4 + REL */ ++#define R_IA64_REL32LSB 0x6d /* data 4 + REL */ ++#define R_IA64_REL64MSB 0x6e /* data 8 + REL */ ++#define R_IA64_REL64LSB 0x6f /* data 8 + REL */ ++#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */ ++#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */ ++#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */ ++#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */ ++#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */ ++#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */ ++#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */ ++#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */ ++#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */ ++#define R_IA64_COPY 0x84 /* copy relocation */ ++#define R_IA64_SUB 0x85 /* Addend and symbol difference */ ++#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */ ++#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */ ++#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */ ++#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */ ++#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */ ++#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */ ++#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */ ++#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */ ++#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */ ++#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */ ++#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */ ++#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */ ++#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */ ++#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */ ++#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */ ++#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */ ++#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */ ++#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */ ++#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */ ++ ++/* SH specific declarations */ ++ ++/* Processor specific flags for the ELF header e_flags field. */ ++#define EF_SH_MACH_MASK 0x1f ++#define EF_SH_UNKNOWN 0x0 ++#define EF_SH1 0x1 ++#define EF_SH2 0x2 ++#define EF_SH3 0x3 ++#define EF_SH_DSP 0x4 ++#define EF_SH3_DSP 0x5 ++#define EF_SH4AL_DSP 0x6 ++#define EF_SH3E 0x8 ++#define EF_SH4 0x9 ++#define EF_SH2E 0xb ++#define EF_SH4A 0xc ++#define EF_SH2A 0xd ++#define EF_SH4_NOFPU 0x10 ++#define EF_SH4A_NOFPU 0x11 ++#define EF_SH4_NOMMU_NOFPU 0x12 ++#define EF_SH2A_NOFPU 0x13 ++#define EF_SH3_NOMMU 0x14 ++#define EF_SH2A_SH4_NOFPU 0x15 ++#define EF_SH2A_SH3_NOFPU 0x16 ++#define EF_SH2A_SH4 0x17 ++#define EF_SH2A_SH3E 0x18 ++ ++/* SH relocs. */ ++#define R_SH_NONE 0 ++#define R_SH_DIR32 1 ++#define R_SH_REL32 2 ++#define R_SH_DIR8WPN 3 ++#define R_SH_IND12W 4 ++#define R_SH_DIR8WPL 5 ++#define R_SH_DIR8WPZ 6 ++#define R_SH_DIR8BP 7 ++#define R_SH_DIR8W 8 ++#define R_SH_DIR8L 9 ++#define R_SH_SWITCH16 25 ++#define R_SH_SWITCH32 26 ++#define R_SH_USES 27 ++#define R_SH_COUNT 28 ++#define R_SH_ALIGN 29 ++#define R_SH_CODE 30 ++#define R_SH_DATA 31 ++#define R_SH_LABEL 32 ++#define R_SH_SWITCH8 33 ++#define R_SH_GNU_VTINHERIT 34 ++#define R_SH_GNU_VTENTRY 35 ++#define R_SH_TLS_GD_32 144 ++#define R_SH_TLS_LD_32 145 ++#define R_SH_TLS_LDO_32 146 ++#define R_SH_TLS_IE_32 147 ++#define R_SH_TLS_LE_32 148 ++#define R_SH_TLS_DTPMOD32 149 ++#define R_SH_TLS_DTPOFF32 150 ++#define R_SH_TLS_TPOFF32 151 ++#define R_SH_GOT32 160 ++#define R_SH_PLT32 161 ++#define R_SH_COPY 162 ++#define R_SH_GLOB_DAT 163 ++#define R_SH_JMP_SLOT 164 ++#define R_SH_RELATIVE 165 ++#define R_SH_GOTOFF 166 ++#define R_SH_GOTPC 167 ++/* Keep this the last entry. */ ++#define R_SH_NUM 256 ++ ++/* S/390 specific definitions. */ ++ ++/* Valid values for the e_flags field. */ ++ ++#define EF_S390_HIGH_GPRS 0x00000001 /* High GPRs kernel facility needed. */ ++ ++/* Additional s390 relocs */ ++ ++#define R_390_NONE 0 /* No reloc. */ ++#define R_390_8 1 /* Direct 8 bit. */ ++#define R_390_12 2 /* Direct 12 bit. */ ++#define R_390_16 3 /* Direct 16 bit. */ ++#define R_390_32 4 /* Direct 32 bit. */ ++#define R_390_PC32 5 /* PC relative 32 bit. */ ++#define R_390_GOT12 6 /* 12 bit GOT offset. */ ++#define R_390_GOT32 7 /* 32 bit GOT offset. */ ++#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */ ++#define R_390_COPY 9 /* Copy symbol at runtime. */ ++#define R_390_GLOB_DAT 10 /* Create GOT entry. */ ++#define R_390_JMP_SLOT 11 /* Create PLT entry. */ ++#define R_390_RELATIVE 12 /* Adjust by program base. */ ++#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */ ++#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */ ++#define R_390_GOT16 15 /* 16 bit GOT offset. */ ++#define R_390_PC16 16 /* PC relative 16 bit. */ ++#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */ ++#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */ ++#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */ ++#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */ ++#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */ ++#define R_390_64 22 /* Direct 64 bit. */ ++#define R_390_PC64 23 /* PC relative 64 bit. */ ++#define R_390_GOT64 24 /* 64 bit GOT offset. */ ++#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */ ++#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */ ++#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */ ++#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */ ++#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */ ++#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */ ++#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */ ++#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */ ++#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */ ++#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */ ++#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */ ++#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */ ++#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */ ++#define R_390_TLS_GDCALL 38 /* Tag for function call in general ++ dynamic TLS code. */ ++#define R_390_TLS_LDCALL 39 /* Tag for function call in local ++ dynamic TLS code. */ ++#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic ++ thread local data. */ ++#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic ++ thread local data. */ ++#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS ++ block offset. */ ++#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS ++ block offset. */ ++#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS ++ block offset. */ ++#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic ++ thread local data in LE code. */ ++#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic ++ thread local data in LE code. */ ++#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for ++ negated static TLS block offset. */ ++#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for ++ negated static TLS block offset. */ ++#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for ++ negated static TLS block offset. */ ++#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to ++ static TLS block. */ ++#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to ++ static TLS block. */ ++#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS ++ block. */ ++#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS ++ block. */ ++#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */ ++#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */ ++#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS ++ block. */ ++#define R_390_20 57 /* Direct 20 bit. */ ++#define R_390_GOT20 58 /* 20 bit GOT offset. */ ++#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */ ++#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS ++ block offset. */ ++#define R_390_IRELATIVE 61 /* STT_GNU_IFUNC relocation. */ ++/* Keep this the last entry. */ ++#define R_390_NUM 62 ++ ++ ++/* CRIS relocations. */ ++#define R_CRIS_NONE 0 ++#define R_CRIS_8 1 ++#define R_CRIS_16 2 ++#define R_CRIS_32 3 ++#define R_CRIS_8_PCREL 4 ++#define R_CRIS_16_PCREL 5 ++#define R_CRIS_32_PCREL 6 ++#define R_CRIS_GNU_VTINHERIT 7 ++#define R_CRIS_GNU_VTENTRY 8 ++#define R_CRIS_COPY 9 ++#define R_CRIS_GLOB_DAT 10 ++#define R_CRIS_JUMP_SLOT 11 ++#define R_CRIS_RELATIVE 12 ++#define R_CRIS_16_GOT 13 ++#define R_CRIS_32_GOT 14 ++#define R_CRIS_16_GOTPLT 15 ++#define R_CRIS_32_GOTPLT 16 ++#define R_CRIS_32_GOTREL 17 ++#define R_CRIS_32_PLT_GOTREL 18 ++#define R_CRIS_32_PLT_PCREL 19 ++ ++#define R_CRIS_NUM 20 ++ ++ ++/* AMD x86-64 relocations. */ ++#define R_X86_64_NONE 0 /* No reloc */ ++#define R_X86_64_64 1 /* Direct 64 bit */ ++#define R_X86_64_PC32 2 /* PC relative 32 bit signed */ ++#define R_X86_64_GOT32 3 /* 32 bit GOT entry */ ++#define R_X86_64_PLT32 4 /* 32 bit PLT address */ ++#define R_X86_64_COPY 5 /* Copy symbol at runtime */ ++#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */ ++#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */ ++#define R_X86_64_RELATIVE 8 /* Adjust by program base */ ++#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative ++ offset to GOT */ ++#define R_X86_64_32 10 /* Direct 32 bit zero extended */ ++#define R_X86_64_32S 11 /* Direct 32 bit sign extended */ ++#define R_X86_64_16 12 /* Direct 16 bit zero extended */ ++#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */ ++#define R_X86_64_8 14 /* Direct 8 bit sign extended */ ++#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */ ++#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */ ++#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */ ++#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */ ++#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset ++ to two GOT entries for GD symbol */ ++#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset ++ to two GOT entries for LD symbol */ ++#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */ ++#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset ++ to GOT entry for IE symbol */ ++#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */ ++#define R_X86_64_PC64 24 /* PC relative 64 bit */ ++#define R_X86_64_GOTOFF64 25 /* 64 bit offset to GOT */ ++#define R_X86_64_GOTPC32 26 /* 32 bit signed pc relative ++ offset to GOT */ ++#define R_X86_64_GOT64 27 /* 64-bit GOT entry offset */ ++#define R_X86_64_GOTPCREL64 28 /* 64-bit PC relative offset ++ to GOT entry */ ++#define R_X86_64_GOTPC64 29 /* 64-bit PC relative offset to GOT */ ++#define R_X86_64_GOTPLT64 30 /* like GOT64, says PLT entry needed */ ++#define R_X86_64_PLTOFF64 31 /* 64-bit GOT relative offset ++ to PLT entry */ ++#define R_X86_64_SIZE32 32 /* Size of symbol plus 32-bit addend */ ++#define R_X86_64_SIZE64 33 /* Size of symbol plus 64-bit addend */ ++#define R_X86_64_GOTPC32_TLSDESC 34 /* GOT offset for TLS descriptor. */ ++#define R_X86_64_TLSDESC_CALL 35 /* Marker for call through TLS ++ descriptor. */ ++#define R_X86_64_TLSDESC 36 /* TLS descriptor. */ ++#define R_X86_64_IRELATIVE 37 /* Adjust indirectly by program base */ ++#define R_X86_64_RELATIVE64 38 /* 64-bit adjust by program base */ ++ ++#define R_X86_64_NUM 39 ++ ++ ++/* AM33 relocations. */ ++#define R_MN10300_NONE 0 /* No reloc. */ ++#define R_MN10300_32 1 /* Direct 32 bit. */ ++#define R_MN10300_16 2 /* Direct 16 bit. */ ++#define R_MN10300_8 3 /* Direct 8 bit. */ ++#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ ++#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ ++#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ ++#define R_MN10300_GNU_VTINHERIT 7 /* Ancient C++ vtable garbage... */ ++#define R_MN10300_GNU_VTENTRY 8 /* ... collection annotation. */ ++#define R_MN10300_24 9 /* Direct 24 bit. */ ++#define R_MN10300_GOTPC32 10 /* 32-bit PCrel offset to GOT. */ ++#define R_MN10300_GOTPC16 11 /* 16-bit PCrel offset to GOT. */ ++#define R_MN10300_GOTOFF32 12 /* 32-bit offset from GOT. */ ++#define R_MN10300_GOTOFF24 13 /* 24-bit offset from GOT. */ ++#define R_MN10300_GOTOFF16 14 /* 16-bit offset from GOT. */ ++#define R_MN10300_PLT32 15 /* 32-bit PCrel to PLT entry. */ ++#define R_MN10300_PLT16 16 /* 16-bit PCrel to PLT entry. */ ++#define R_MN10300_GOT32 17 /* 32-bit offset to GOT entry. */ ++#define R_MN10300_GOT24 18 /* 24-bit offset to GOT entry. */ ++#define R_MN10300_GOT16 19 /* 16-bit offset to GOT entry. */ ++#define R_MN10300_COPY 20 /* Copy symbol at runtime. */ ++#define R_MN10300_GLOB_DAT 21 /* Create GOT entry. */ ++#define R_MN10300_JMP_SLOT 22 /* Create PLT entry. */ ++#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ ++ ++#define R_MN10300_NUM 24 ++ ++ ++/* M32R relocs. */ ++#define R_M32R_NONE 0 /* No reloc. */ ++#define R_M32R_16 1 /* Direct 16 bit. */ ++#define R_M32R_32 2 /* Direct 32 bit. */ ++#define R_M32R_24 3 /* Direct 24 bit. */ ++#define R_M32R_10_PCREL 4 /* PC relative 10 bit shifted. */ ++#define R_M32R_18_PCREL 5 /* PC relative 18 bit shifted. */ ++#define R_M32R_26_PCREL 6 /* PC relative 26 bit shifted. */ ++#define R_M32R_HI16_ULO 7 /* High 16 bit with unsigned low. */ ++#define R_M32R_HI16_SLO 8 /* High 16 bit with signed low. */ ++#define R_M32R_LO16 9 /* Low 16 bit. */ ++#define R_M32R_SDA16 10 /* 16 bit offset in SDA. */ ++#define R_M32R_GNU_VTINHERIT 11 ++#define R_M32R_GNU_VTENTRY 12 ++/* M32R relocs use SHT_RELA. */ ++#define R_M32R_16_RELA 33 /* Direct 16 bit. */ ++#define R_M32R_32_RELA 34 /* Direct 32 bit. */ ++#define R_M32R_24_RELA 35 /* Direct 24 bit. */ ++#define R_M32R_10_PCREL_RELA 36 /* PC relative 10 bit shifted. */ ++#define R_M32R_18_PCREL_RELA 37 /* PC relative 18 bit shifted. */ ++#define R_M32R_26_PCREL_RELA 38 /* PC relative 26 bit shifted. */ ++#define R_M32R_HI16_ULO_RELA 39 /* High 16 bit with unsigned low */ ++#define R_M32R_HI16_SLO_RELA 40 /* High 16 bit with signed low */ ++#define R_M32R_LO16_RELA 41 /* Low 16 bit */ ++#define R_M32R_SDA16_RELA 42 /* 16 bit offset in SDA */ ++#define R_M32R_RELA_GNU_VTINHERIT 43 ++#define R_M32R_RELA_GNU_VTENTRY 44 ++#define R_M32R_REL32 45 /* PC relative 32 bit. */ ++ ++#define R_M32R_GOT24 48 /* 24 bit GOT entry */ ++#define R_M32R_26_PLTREL 49 /* 26 bit PC relative to PLT shifted */ ++#define R_M32R_COPY 50 /* Copy symbol at runtime */ ++#define R_M32R_GLOB_DAT 51 /* Create GOT entry */ ++#define R_M32R_JMP_SLOT 52 /* Create PLT entry */ ++#define R_M32R_RELATIVE 53 /* Adjust by program base */ ++#define R_M32R_GOTOFF 54 /* 24 bit offset to GOT */ ++#define R_M32R_GOTPC24 55 /* 24 bit PC relative offset to GOT */ ++#define R_M32R_GOT16_HI_ULO 56 /* High 16 bit GOT entry with unsigned ++ low */ ++#define R_M32R_GOT16_HI_SLO 57 /* High 16 bit GOT entry with signed ++ low */ ++#define R_M32R_GOT16_LO 58 /* Low 16 bit GOT entry */ ++#define R_M32R_GOTPC_HI_ULO 59 /* High 16 bit PC relative offset to ++ GOT with unsigned low */ ++#define R_M32R_GOTPC_HI_SLO 60 /* High 16 bit PC relative offset to ++ GOT with signed low */ ++#define R_M32R_GOTPC_LO 61 /* Low 16 bit PC relative offset to ++ GOT */ ++#define R_M32R_GOTOFF_HI_ULO 62 /* High 16 bit offset to GOT ++ with unsigned low */ ++#define R_M32R_GOTOFF_HI_SLO 63 /* High 16 bit offset to GOT ++ with signed low */ ++#define R_M32R_GOTOFF_LO 64 /* Low 16 bit offset to GOT */ ++#define R_M32R_NUM 256 /* Keep this the last entry. */ ++ ++ ++/* TILEPro relocations. */ ++#define R_TILEPRO_NONE 0 /* No reloc */ ++#define R_TILEPRO_32 1 /* Direct 32 bit */ ++#define R_TILEPRO_16 2 /* Direct 16 bit */ ++#define R_TILEPRO_8 3 /* Direct 8 bit */ ++#define R_TILEPRO_32_PCREL 4 /* PC relative 32 bit */ ++#define R_TILEPRO_16_PCREL 5 /* PC relative 16 bit */ ++#define R_TILEPRO_8_PCREL 6 /* PC relative 8 bit */ ++#define R_TILEPRO_LO16 7 /* Low 16 bit */ ++#define R_TILEPRO_HI16 8 /* High 16 bit */ ++#define R_TILEPRO_HA16 9 /* High 16 bit, adjusted */ ++#define R_TILEPRO_COPY 10 /* Copy relocation */ ++#define R_TILEPRO_GLOB_DAT 11 /* Create GOT entry */ ++#define R_TILEPRO_JMP_SLOT 12 /* Create PLT entry */ ++#define R_TILEPRO_RELATIVE 13 /* Adjust by program base */ ++#define R_TILEPRO_BROFF_X1 14 /* X1 pipe branch offset */ ++#define R_TILEPRO_JOFFLONG_X1 15 /* X1 pipe jump offset */ ++#define R_TILEPRO_JOFFLONG_X1_PLT 16 /* X1 pipe jump offset to PLT */ ++#define R_TILEPRO_IMM8_X0 17 /* X0 pipe 8-bit */ ++#define R_TILEPRO_IMM8_Y0 18 /* Y0 pipe 8-bit */ ++#define R_TILEPRO_IMM8_X1 19 /* X1 pipe 8-bit */ ++#define R_TILEPRO_IMM8_Y1 20 /* Y1 pipe 8-bit */ ++#define R_TILEPRO_MT_IMM15_X1 21 /* X1 pipe mtspr */ ++#define R_TILEPRO_MF_IMM15_X1 22 /* X1 pipe mfspr */ ++#define R_TILEPRO_IMM16_X0 23 /* X0 pipe 16-bit */ ++#define R_TILEPRO_IMM16_X1 24 /* X1 pipe 16-bit */ ++#define R_TILEPRO_IMM16_X0_LO 25 /* X0 pipe low 16-bit */ ++#define R_TILEPRO_IMM16_X1_LO 26 /* X1 pipe low 16-bit */ ++#define R_TILEPRO_IMM16_X0_HI 27 /* X0 pipe high 16-bit */ ++#define R_TILEPRO_IMM16_X1_HI 28 /* X1 pipe high 16-bit */ ++#define R_TILEPRO_IMM16_X0_HA 29 /* X0 pipe high 16-bit, adjusted */ ++#define R_TILEPRO_IMM16_X1_HA 30 /* X1 pipe high 16-bit, adjusted */ ++#define R_TILEPRO_IMM16_X0_PCREL 31 /* X0 pipe PC relative 16 bit */ ++#define R_TILEPRO_IMM16_X1_PCREL 32 /* X1 pipe PC relative 16 bit */ ++#define R_TILEPRO_IMM16_X0_LO_PCREL 33 /* X0 pipe PC relative low 16 bit */ ++#define R_TILEPRO_IMM16_X1_LO_PCREL 34 /* X1 pipe PC relative low 16 bit */ ++#define R_TILEPRO_IMM16_X0_HI_PCREL 35 /* X0 pipe PC relative high 16 bit */ ++#define R_TILEPRO_IMM16_X1_HI_PCREL 36 /* X1 pipe PC relative high 16 bit */ ++#define R_TILEPRO_IMM16_X0_HA_PCREL 37 /* X0 pipe PC relative ha() 16 bit */ ++#define R_TILEPRO_IMM16_X1_HA_PCREL 38 /* X1 pipe PC relative ha() 16 bit */ ++#define R_TILEPRO_IMM16_X0_GOT 39 /* X0 pipe 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X1_GOT 40 /* X1 pipe 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X0_GOT_LO 41 /* X0 pipe low 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X1_GOT_LO 42 /* X1 pipe low 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X0_GOT_HI 43 /* X0 pipe high 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X1_GOT_HI 44 /* X1 pipe high 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X0_GOT_HA 45 /* X0 pipe ha() 16-bit GOT offset */ ++#define R_TILEPRO_IMM16_X1_GOT_HA 46 /* X1 pipe ha() 16-bit GOT offset */ ++#define R_TILEPRO_MMSTART_X0 47 /* X0 pipe mm "start" */ ++#define R_TILEPRO_MMEND_X0 48 /* X0 pipe mm "end" */ ++#define R_TILEPRO_MMSTART_X1 49 /* X1 pipe mm "start" */ ++#define R_TILEPRO_MMEND_X1 50 /* X1 pipe mm "end" */ ++#define R_TILEPRO_SHAMT_X0 51 /* X0 pipe shift amount */ ++#define R_TILEPRO_SHAMT_X1 52 /* X1 pipe shift amount */ ++#define R_TILEPRO_SHAMT_Y0 53 /* Y0 pipe shift amount */ ++#define R_TILEPRO_SHAMT_Y1 54 /* Y1 pipe shift amount */ ++#define R_TILEPRO_DEST_IMM8_X1 55 /* X1 pipe destination 8-bit */ ++/* Relocs 56-59 are currently not defined. */ ++#define R_TILEPRO_TLS_GD_CALL 60 /* "jal" for TLS GD */ ++#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61 /* X0 pipe "addi" for TLS GD */ ++#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62 /* X1 pipe "addi" for TLS GD */ ++#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63 /* Y0 pipe "addi" for TLS GD */ ++#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64 /* Y1 pipe "addi" for TLS GD */ ++#define R_TILEPRO_TLS_IE_LOAD 65 /* "lw_tls" for TLS IE */ ++#define R_TILEPRO_IMM16_X0_TLS_GD 66 /* X0 pipe 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X1_TLS_GD 67 /* X1 pipe 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68 /* X0 pipe low 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69 /* X1 pipe low 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70 /* X0 pipe high 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71 /* X1 pipe high 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72 /* X0 pipe ha() 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73 /* X1 pipe ha() 16-bit TLS GD offset */ ++#define R_TILEPRO_IMM16_X0_TLS_IE 74 /* X0 pipe 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_IE 75 /* X1 pipe 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76 /* X0 pipe low 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77 /* X1 pipe low 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78 /* X0 pipe high 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79 /* X1 pipe high 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80 /* X0 pipe ha() 16-bit TLS IE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81 /* X1 pipe ha() 16-bit TLS IE offset */ ++#define R_TILEPRO_TLS_DTPMOD32 82 /* ID of module containing symbol */ ++#define R_TILEPRO_TLS_DTPOFF32 83 /* Offset in TLS block */ ++#define R_TILEPRO_TLS_TPOFF32 84 /* Offset in static TLS block */ ++#define R_TILEPRO_IMM16_X0_TLS_LE 85 /* X0 pipe 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_LE 86 /* X1 pipe 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87 /* X0 pipe low 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88 /* X1 pipe low 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89 /* X0 pipe high 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90 /* X1 pipe high 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91 /* X0 pipe ha() 16-bit TLS LE offset */ ++#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92 /* X1 pipe ha() 16-bit TLS LE offset */ ++ ++#define R_TILEPRO_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ ++#define R_TILEPRO_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ ++ ++#define R_TILEPRO_NUM 130 ++ ++ ++/* TILE-Gx relocations. */ ++#define R_TILEGX_NONE 0 /* No reloc */ ++#define R_TILEGX_64 1 /* Direct 64 bit */ ++#define R_TILEGX_32 2 /* Direct 32 bit */ ++#define R_TILEGX_16 3 /* Direct 16 bit */ ++#define R_TILEGX_8 4 /* Direct 8 bit */ ++#define R_TILEGX_64_PCREL 5 /* PC relative 64 bit */ ++#define R_TILEGX_32_PCREL 6 /* PC relative 32 bit */ ++#define R_TILEGX_16_PCREL 7 /* PC relative 16 bit */ ++#define R_TILEGX_8_PCREL 8 /* PC relative 8 bit */ ++#define R_TILEGX_HW0 9 /* hword 0 16-bit */ ++#define R_TILEGX_HW1 10 /* hword 1 16-bit */ ++#define R_TILEGX_HW2 11 /* hword 2 16-bit */ ++#define R_TILEGX_HW3 12 /* hword 3 16-bit */ ++#define R_TILEGX_HW0_LAST 13 /* last hword 0 16-bit */ ++#define R_TILEGX_HW1_LAST 14 /* last hword 1 16-bit */ ++#define R_TILEGX_HW2_LAST 15 /* last hword 2 16-bit */ ++#define R_TILEGX_COPY 16 /* Copy relocation */ ++#define R_TILEGX_GLOB_DAT 17 /* Create GOT entry */ ++#define R_TILEGX_JMP_SLOT 18 /* Create PLT entry */ ++#define R_TILEGX_RELATIVE 19 /* Adjust by program base */ ++#define R_TILEGX_BROFF_X1 20 /* X1 pipe branch offset */ ++#define R_TILEGX_JUMPOFF_X1 21 /* X1 pipe jump offset */ ++#define R_TILEGX_JUMPOFF_X1_PLT 22 /* X1 pipe jump offset to PLT */ ++#define R_TILEGX_IMM8_X0 23 /* X0 pipe 8-bit */ ++#define R_TILEGX_IMM8_Y0 24 /* Y0 pipe 8-bit */ ++#define R_TILEGX_IMM8_X1 25 /* X1 pipe 8-bit */ ++#define R_TILEGX_IMM8_Y1 26 /* Y1 pipe 8-bit */ ++#define R_TILEGX_DEST_IMM8_X1 27 /* X1 pipe destination 8-bit */ ++#define R_TILEGX_MT_IMM14_X1 28 /* X1 pipe mtspr */ ++#define R_TILEGX_MF_IMM14_X1 29 /* X1 pipe mfspr */ ++#define R_TILEGX_MMSTART_X0 30 /* X0 pipe mm "start" */ ++#define R_TILEGX_MMEND_X0 31 /* X0 pipe mm "end" */ ++#define R_TILEGX_SHAMT_X0 32 /* X0 pipe shift amount */ ++#define R_TILEGX_SHAMT_X1 33 /* X1 pipe shift amount */ ++#define R_TILEGX_SHAMT_Y0 34 /* Y0 pipe shift amount */ ++#define R_TILEGX_SHAMT_Y1 35 /* Y1 pipe shift amount */ ++#define R_TILEGX_IMM16_X0_HW0 36 /* X0 pipe hword 0 */ ++#define R_TILEGX_IMM16_X1_HW0 37 /* X1 pipe hword 0 */ ++#define R_TILEGX_IMM16_X0_HW1 38 /* X0 pipe hword 1 */ ++#define R_TILEGX_IMM16_X1_HW1 39 /* X1 pipe hword 1 */ ++#define R_TILEGX_IMM16_X0_HW2 40 /* X0 pipe hword 2 */ ++#define R_TILEGX_IMM16_X1_HW2 41 /* X1 pipe hword 2 */ ++#define R_TILEGX_IMM16_X0_HW3 42 /* X0 pipe hword 3 */ ++#define R_TILEGX_IMM16_X1_HW3 43 /* X1 pipe hword 3 */ ++#define R_TILEGX_IMM16_X0_HW0_LAST 44 /* X0 pipe last hword 0 */ ++#define R_TILEGX_IMM16_X1_HW0_LAST 45 /* X1 pipe last hword 0 */ ++#define R_TILEGX_IMM16_X0_HW1_LAST 46 /* X0 pipe last hword 1 */ ++#define R_TILEGX_IMM16_X1_HW1_LAST 47 /* X1 pipe last hword 1 */ ++#define R_TILEGX_IMM16_X0_HW2_LAST 48 /* X0 pipe last hword 2 */ ++#define R_TILEGX_IMM16_X1_HW2_LAST 49 /* X1 pipe last hword 2 */ ++#define R_TILEGX_IMM16_X0_HW0_PCREL 50 /* X0 pipe PC relative hword 0 */ ++#define R_TILEGX_IMM16_X1_HW0_PCREL 51 /* X1 pipe PC relative hword 0 */ ++#define R_TILEGX_IMM16_X0_HW1_PCREL 52 /* X0 pipe PC relative hword 1 */ ++#define R_TILEGX_IMM16_X1_HW1_PCREL 53 /* X1 pipe PC relative hword 1 */ ++#define R_TILEGX_IMM16_X0_HW2_PCREL 54 /* X0 pipe PC relative hword 2 */ ++#define R_TILEGX_IMM16_X1_HW2_PCREL 55 /* X1 pipe PC relative hword 2 */ ++#define R_TILEGX_IMM16_X0_HW3_PCREL 56 /* X0 pipe PC relative hword 3 */ ++#define R_TILEGX_IMM16_X1_HW3_PCREL 57 /* X1 pipe PC relative hword 3 */ ++#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */ ++#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */ ++#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */ ++#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */ ++#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */ ++#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */ ++#define R_TILEGX_IMM16_X0_HW0_GOT 64 /* X0 pipe hword 0 GOT offset */ ++#define R_TILEGX_IMM16_X1_HW0_GOT 65 /* X1 pipe hword 0 GOT offset */ ++/* Relocs 66-71 are currently not defined. */ ++#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */ ++#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */ ++#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */ ++#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */ ++/* Relocs 76-77 are currently not defined. */ ++#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78 /* X0 pipe hword 0 TLS GD offset */ ++#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79 /* X1 pipe hword 0 TLS GD offset */ ++#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80 /* X0 pipe hword 0 TLS LE offset */ ++#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81 /* X1 pipe hword 0 TLS LE offset */ ++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */ ++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */ ++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */ ++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */ ++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */ ++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */ ++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */ ++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */ ++/* Relocs 90-91 are currently not defined. */ ++#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92 /* X0 pipe hword 0 TLS IE offset */ ++#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93 /* X1 pipe hword 0 TLS IE offset */ ++/* Relocs 94-99 are currently not defined. */ ++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */ ++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */ ++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */ ++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */ ++/* Relocs 104-105 are currently not defined. */ ++#define R_TILEGX_TLS_DTPMOD64 106 /* 64-bit ID of symbol's module */ ++#define R_TILEGX_TLS_DTPOFF64 107 /* 64-bit offset in TLS block */ ++#define R_TILEGX_TLS_TPOFF64 108 /* 64-bit offset in static TLS block */ ++#define R_TILEGX_TLS_DTPMOD32 109 /* 32-bit ID of symbol's module */ ++#define R_TILEGX_TLS_DTPOFF32 110 /* 32-bit offset in TLS block */ ++#define R_TILEGX_TLS_TPOFF32 111 /* 32-bit offset in static TLS block */ ++#define R_TILEGX_TLS_GD_CALL 112 /* "jal" for TLS GD */ ++#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113 /* X0 pipe "addi" for TLS GD */ ++#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114 /* X1 pipe "addi" for TLS GD */ ++#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115 /* Y0 pipe "addi" for TLS GD */ ++#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116 /* Y1 pipe "addi" for TLS GD */ ++#define R_TILEGX_TLS_IE_LOAD 117 /* "ld_tls" for TLS IE */ ++#define R_TILEGX_IMM8_X0_TLS_ADD 118 /* X0 pipe "addi" for TLS GD/IE */ ++#define R_TILEGX_IMM8_X1_TLS_ADD 119 /* X1 pipe "addi" for TLS GD/IE */ ++#define R_TILEGX_IMM8_Y0_TLS_ADD 120 /* Y0 pipe "addi" for TLS GD/IE */ ++#define R_TILEGX_IMM8_Y1_TLS_ADD 121 /* Y1 pipe "addi" for TLS GD/IE */ ++ ++#define R_TILEGX_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */ ++#define R_TILEGX_GNU_VTENTRY 129 /* GNU C++ vtable member usage */ ++ ++#define R_TILEGX_NUM 130 ++ ++#endif /* elf.h */ +--- a/scripts/mod/mk_elfconfig.c ++++ b/scripts/mod/mk_elfconfig.c +@@ -2,7 +2,11 @@ + #include + #include + #include ++#ifndef __APPLE__ + #include ++#else ++#include "elf.h" ++#endif + + int + main(int argc, char **argv) +--- a/scripts/mod/modpost.h ++++ b/scripts/mod/modpost.h +@@ -8,7 +8,11 @@ + #include + #include + #include ++#if !(defined(__APPLE__) || defined(__CYGWIN__)) + #include ++#else ++#include "elf.h" ++#endif + + #include "elfconfig.h" + diff --git a/target/linux/generic/hack-5.15/211-darwin-uuid-typedef-clash.patch b/target/linux/generic/hack-5.15/211-darwin-uuid-typedef-clash.patch new file mode 100644 index 0000000000..50a6227148 --- /dev/null +++ b/target/linux/generic/hack-5.15/211-darwin-uuid-typedef-clash.patch @@ -0,0 +1,22 @@ +From e44fc2af1ddc452b6659d08c16973d65c73b7d0a Mon Sep 17 00:00:00 2001 +From: Kevin Darbyshire-Bryant +Date: Wed, 5 Feb 2020 18:36:43 +0000 +Subject: [PATCH] file2alias: build on macos + +Signed-off-by: Kevin Darbyshire-Bryant +--- + scripts/mod/file2alias.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/scripts/mod/file2alias.c ++++ b/scripts/mod/file2alias.c +@@ -38,6 +38,9 @@ typedef struct { + __u8 b[16]; + } guid_t; + ++#ifdef __APPLE__ ++#define uuid_t compat_uuid_t ++#endif + /* backwards compatibility, don't use in new code */ + typedef struct { + __u8 b[16]; diff --git a/target/linux/generic/hack-5.15/212-tools_portability.patch b/target/linux/generic/hack-5.15/212-tools_portability.patch new file mode 100644 index 0000000000..0d8eb6fb9d --- /dev/null +++ b/target/linux/generic/hack-5.15/212-tools_portability.patch @@ -0,0 +1,110 @@ +From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:03:16 +0200 +Subject: fix portability of some includes files in tools/ used on the host + +Signed-off-by: Felix Fietkau +--- + tools/include/tools/be_byteshift.h | 4 ++++ + tools/include/tools/le_byteshift.h | 4 ++++ + tools/include/tools/linux_types.h | 22 ++++++++++++++++++++++ + 3 files changed, 30 insertions(+) + create mode 100644 tools/include/tools/linux_types.h + +--- a/tools/include/tools/be_byteshift.h ++++ b/tools/include/tools/be_byteshift.h +@@ -2,6 +2,10 @@ + #ifndef _TOOLS_BE_BYTESHIFT_H + #define _TOOLS_BE_BYTESHIFT_H + ++#ifndef __linux__ ++#include "linux_types.h" ++#endif ++ + #include + + static inline uint16_t __get_unaligned_be16(const uint8_t *p) +--- a/tools/include/tools/le_byteshift.h ++++ b/tools/include/tools/le_byteshift.h +@@ -2,6 +2,10 @@ + #ifndef _TOOLS_LE_BYTESHIFT_H + #define _TOOLS_LE_BYTESHIFT_H + ++#ifndef __linux__ ++#include "linux_types.h" ++#endif ++ + #include + + static inline uint16_t __get_unaligned_le16(const uint8_t *p) +--- /dev/null ++++ b/tools/include/tools/linux_types.h +@@ -0,0 +1,26 @@ ++#ifndef __LINUX_TYPES_H ++#define __LINUX_TYPES_H ++ ++#include ++ ++typedef int8_t __s8; ++typedef uint8_t __u8; ++typedef uint8_t __be8; ++typedef uint8_t __le8; ++ ++typedef int16_t __s16; ++typedef uint16_t __u16; ++typedef uint16_t __be16; ++typedef uint16_t __le16; ++ ++typedef int32_t __s32; ++typedef uint32_t __u32; ++typedef uint32_t __be32; ++typedef uint32_t __le32; ++ ++typedef int64_t __s64; ++typedef uint64_t __u64; ++typedef uint64_t __be64; ++typedef uint64_t __le64; ++ ++#endif +--- a/tools/include/linux/types.h ++++ b/tools/include/linux/types.h +@@ -7,8 +7,12 @@ + #include + + #define __SANE_USERSPACE_TYPES__ /* For PPC64, to get LL64 types */ ++#ifndef __linux__ ++#include ++#else + #include + #include ++#endif + + struct page; + struct kmem_cache; +--- a/tools/perf/pmu-events/jevents.c ++++ b/tools/perf/pmu-events/jevents.c +@@ -1,4 +1,6 @@ ++#ifdef __linux__ + #define _XOPEN_SOURCE 500 /* needed for nftw() */ ++#endif + #define _GNU_SOURCE /* needed for asprintf() */ + + /* Parse event JSON files */ +@@ -35,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +--- a/tools/perf/pmu-events/json.c ++++ b/tools/perf/pmu-events/json.c +@@ -38,7 +38,6 @@ + #include + #include "jsmn.h" + #include "json.h" +-#include + + + static char *mapfile(const char *fn, size_t *size) diff --git a/target/linux/generic/hack-5.15/214-spidev_h_portability.patch b/target/linux/generic/hack-5.15/214-spidev_h_portability.patch new file mode 100644 index 0000000000..506d50ad4d --- /dev/null +++ b/target/linux/generic/hack-5.15/214-spidev_h_portability.patch @@ -0,0 +1,24 @@ +From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:04:08 +0200 +Subject: kernel: fix linux/spi/spidev.h portability issues with musl + +Felix will try to get this define included into musl + +lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff +Signed-off-by: Felix Fietkau +--- + include/uapi/linux/spi/spidev.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/include/uapi/linux/spi/spidev.h ++++ b/include/uapi/linux/spi/spidev.h +@@ -121,7 +121,7 @@ struct spi_ioc_transfer { + + /* not all platforms use or _IOC_TYPECHECK() ... */ + #define SPI_MSGSIZE(N) \ +- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \ ++ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \ + ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0) + #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) + diff --git a/target/linux/generic/hack-5.15/220-arm-gc_sections.patch b/target/linux/generic/hack-5.15/220-arm-gc_sections.patch new file mode 100644 index 0000000000..5b36c5ebae --- /dev/null +++ b/target/linux/generic/hack-5.15/220-arm-gc_sections.patch @@ -0,0 +1,123 @@ +From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 15 Jul 2017 23:42:36 +0200 +Subject: use -ffunction-sections, -fdata-sections and --gc-sections + +In combination with kernel symbol export stripping this significantly reduces +the kernel image size. Used on both ARM and MIPS architectures. + +Signed-off-by: Felix Fietkau +Signed-off-by: Jonas Gorski +Signed-off-by: Gabor Juhos +--- +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -114,6 +114,7 @@ config ARM + select HAVE_UID16 + select HAVE_VIRT_CPU_ACCOUNTING_GEN + select IRQ_FORCED_THREADING ++ select HAVE_LD_DEAD_CODE_DATA_ELIMINATION + select MODULES_USE_ELF_REL + select NEED_DMA_MAP_STATE + select OF_EARLY_FLATTREE if OF +--- a/arch/arm/boot/compressed/Makefile ++++ b/arch/arm/boot/compressed/Makefile +@@ -100,6 +100,7 @@ $(foreach o, $(libfdt_objs) atags_to_fdt + ifdef building_out_of_srctree + $(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c)) + endif ++KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL)) + + targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ +--- a/arch/arm/kernel/vmlinux.lds.S ++++ b/arch/arm/kernel/vmlinux.lds.S +@@ -75,7 +75,7 @@ SECTIONS + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +- ARM_MMU_KEEP(*(__ex_table)) ++ KEEP(*(__ex_table)) + __stop___ex_table = .; + } + +@@ -100,24 +100,24 @@ SECTIONS + } + .init.arch.info : { + __arch_info_begin = .; +- *(.arch.info.init) ++ KEEP(*(.arch.info.init)) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; +- *(.taglist.init) ++ KEEP(*(.taglist.init)) + __tagtable_end = .; + } + #ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; +- *(.alt.smp.init) ++ KEEP(*(.alt.smp.init)) + __smpalt_end = .; + } + #endif + .init.pv_table : { + __pv_table_begin = .; +- *(.pv_table) ++ KEEP(*(.pv_table)) + __pv_table_end = .; + } + +--- a/arch/arm/include/asm/vmlinux.lds.h ++++ b/arch/arm/include/asm/vmlinux.lds.h +@@ -42,13 +42,13 @@ + #define PROC_INFO \ + . = ALIGN(4); \ + __proc_info_begin = .; \ +- *(.proc.info.init) \ ++ KEEP(*(.proc.info.init)) \ + __proc_info_end = .; + + #define IDMAP_TEXT \ + ALIGN_FUNCTION(); \ + __idmap_text_start = .; \ +- *(.idmap.text) \ ++ KEEP(*(.idmap.text)) \ + __idmap_text_end = .; \ + + #define ARM_DISCARD \ +@@ -109,12 +109,12 @@ + . = ALIGN(8); \ + .ARM.unwind_idx : { \ + __start_unwind_idx = .; \ +- *(.ARM.exidx*) \ ++ KEEP(*(.ARM.exidx*)) \ + __stop_unwind_idx = .; \ + } \ + .ARM.unwind_tab : { \ + __start_unwind_tab = .; \ +- *(.ARM.extab*) \ ++ KEEP(*(.ARM.extab*)) \ + __stop_unwind_tab = .; \ + } + +@@ -126,7 +126,7 @@ + __vectors_lma = .; \ + OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) { \ + .vectors { \ +- *(.vectors) \ ++ KEEP(*(.vectors)) \ + } \ + .vectors.bhb.loop8 { \ + *(.vectors.bhb.loop8) \ +@@ -144,7 +144,7 @@ + \ + __stubs_lma = .; \ + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) { \ +- *(.stubs) \ ++ KEEP(*(.stubs)) \ + } \ + ARM_LMA(__stubs, .stubs); \ + . = __stubs_lma + SIZEOF(.stubs); \ diff --git a/target/linux/generic/hack-5.15/221-module_exports.patch b/target/linux/generic/hack-5.15/221-module_exports.patch new file mode 100644 index 0000000000..cd38125f28 --- /dev/null +++ b/target/linux/generic/hack-5.15/221-module_exports.patch @@ -0,0 +1,102 @@ +From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:05:53 +0200 +Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image + +lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc +Signed-off-by: Felix Fietkau +--- + include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++--- + include/linux/export.h | 9 ++++++++- + scripts/Makefile.build | 2 +- + 3 files changed, 24 insertions(+), 5 deletions(-) + +--- a/include/asm-generic/vmlinux.lds.h ++++ b/include/asm-generic/vmlinux.lds.h +@@ -81,6 +81,16 @@ + #define RO_EXCEPTION_TABLE + #endif + ++#ifndef SYMTAB_KEEP ++#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*))) ++#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*))) ++#endif ++ ++#ifndef SYMTAB_DISCARD ++#define SYMTAB_DISCARD ++#define SYMTAB_DISCARD_GPL ++#endif ++ + /* Align . to a 8 byte boundary equals to maximum function alignment. */ + #define ALIGN_FUNCTION() . = ALIGN(8) + +@@ -473,14 +483,14 @@ + /* Kernel symbol table: Normal symbols */ \ + __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ + __start___ksymtab = .; \ +- KEEP(*(SORT(___ksymtab+*))) \ ++ SYMTAB_KEEP \ + __stop___ksymtab = .; \ + } \ + \ + /* Kernel symbol table: GPL-only symbols */ \ + __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ + __start___ksymtab_gpl = .; \ +- KEEP(*(SORT(___ksymtab_gpl+*))) \ ++ SYMTAB_KEEP_GPL \ + __stop___ksymtab_gpl = .; \ + } \ + \ +@@ -542,7 +552,7 @@ + \ + /* Kernel symbol table: strings */ \ + __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ +- *(__ksymtab_strings) \ ++ *(__ksymtab_strings+*) \ + } \ + \ + /* __*init sections */ \ +@@ -1019,6 +1029,8 @@ + + #define COMMON_DISCARDS \ + SANITIZER_DISCARDS \ ++ SYMTAB_DISCARD \ ++ SYMTAB_DISCARD_GPL \ + *(.discard) \ + *(.discard.*) \ + *(.modinfo) \ +--- a/include/linux/export.h ++++ b/include/linux/export.h +@@ -82,6 +82,12 @@ struct kernel_symbol { + + #else + ++#ifdef MODULE ++#define __EXPORT_SUFFIX(sym) ++#else ++#define __EXPORT_SUFFIX(sym) "+" #sym ++#endif ++ + /* + * For every exported symbol, do the following: + * +@@ -99,7 +105,7 @@ struct kernel_symbol { + extern const char __kstrtab_##sym[]; \ + extern const char __kstrtabns_##sym[]; \ + __CRC_SYMBOL(sym, sec); \ +- asm(" .section \"__ksymtab_strings\",\"aMS\",%progbits,1 \n" \ ++ asm(" .section \"__ksymtab_strings" __EXPORT_SUFFIX(sym) "\",\"aMS\",%progbits,1 \n" \ + "__kstrtab_" #sym ": \n" \ + " .asciz \"" #sym "\" \n" \ + "__kstrtabns_" #sym ": \n" \ +--- a/scripts/Makefile.build ++++ b/scripts/Makefile.build +@@ -367,7 +367,7 @@ targets += $(lib-y) $(always-y) $(MAKECM + # Linker scripts preprocessor (.lds.S -> .lds) + # --------------------------------------------------------------------------- + quiet_cmd_cpp_lds_S = LDS $@ +- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \ ++ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \ + -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< + + $(obj)/%.lds: $(src)/%.lds.S FORCE diff --git a/target/linux/generic/hack-5.15/230-openwrt_lzma_options.patch b/target/linux/generic/hack-5.15/230-openwrt_lzma_options.patch new file mode 100644 index 0000000000..906527faf9 --- /dev/null +++ b/target/linux/generic/hack-5.15/230-openwrt_lzma_options.patch @@ -0,0 +1,34 @@ +From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001 +From: Imre Kaloz +Date: Fri, 7 Jul 2017 17:06:55 +0200 +Subject: use the openwrt lzma options for now + +lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c +Signed-off-by: Imre Kaloz +--- + lib/decompress.c | 1 + + scripts/Makefile.lib | 2 +- + usr/gen_initramfs_list.sh | 10 +++++----- + 3 files changed, 7 insertions(+), 6 deletions(-) + +--- a/lib/decompress.c ++++ b/lib/decompress.c +@@ -53,6 +53,7 @@ static const struct compress_format comp + { {0x1f, 0x9e}, "gzip", gunzip }, + { {0x42, 0x5a}, "bzip2", bunzip2 }, + { {0x5d, 0x00}, "lzma", unlzma }, ++ { {0x6d, 0x00}, "lzma-openwrt", unlzma }, + { {0xfd, 0x37}, "xz", unxz }, + { {0x89, 0x4c}, "lzo", unlzo }, + { {0x02, 0x21}, "lz4", unlz4 }, +--- a/scripts/Makefile.lib ++++ b/scripts/Makefile.lib +@@ -370,7 +370,7 @@ quiet_cmd_bzip2 = BZIP2 $@ + # --------------------------------------------------------------------------- + + quiet_cmd_lzma = LZMA $@ +- cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ ++ cmd_lzma = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@ + + quiet_cmd_lzo = LZO $@ + cmd_lzo = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ diff --git a/target/linux/generic/hack-5.15/249-udp-tunnel-selection.patch b/target/linux/generic/hack-5.15/249-udp-tunnel-selection.patch new file mode 100644 index 0000000000..2c74298dfe --- /dev/null +++ b/target/linux/generic/hack-5.15/249-udp-tunnel-selection.patch @@ -0,0 +1,11 @@ +--- a/net/ipv4/Kconfig ++++ b/net/ipv4/Kconfig +@@ -315,7 +315,7 @@ config NET_IPVTI + on top. + + config NET_UDP_TUNNEL +- tristate ++ tristate "IP: UDP tunneling support" + select NET_IP_TUNNEL + default n + diff --git a/target/linux/generic/hack-5.15/250-netfilter_depends.patch b/target/linux/generic/hack-5.15/250-netfilter_depends.patch new file mode 100644 index 0000000000..b27b440157 --- /dev/null +++ b/target/linux/generic/hack-5.15/250-netfilter_depends.patch @@ -0,0 +1,27 @@ +From: Felix Fietkau +Subject: hack: net: remove bogus netfilter dependencies + +lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6 +Signed-off-by: Felix Fietkau +--- + net/netfilter/Kconfig | 2 -- + 1 file changed, 2 deletions(-) + +--- a/net/netfilter/Kconfig ++++ b/net/netfilter/Kconfig +@@ -228,7 +228,6 @@ config NF_CONNTRACK_FTP + + config NF_CONNTRACK_H323 + tristate "H.323 protocol support" +- depends on IPV6 || IPV6=n + depends on NETFILTER_ADVANCED + help + H.323 is a VoIP signalling protocol from ITU-T. As one of the most +@@ -1072,7 +1071,6 @@ config NETFILTER_XT_TARGET_SECMARK + + config NETFILTER_XT_TARGET_TCPMSS + tristate '"TCPMSS" target support' +- depends on IPV6 || IPV6=n + default m if NETFILTER_ADVANCED=n + help + This option adds a `TCPMSS' target, which allows you to alter the diff --git a/target/linux/generic/hack-5.15/251-kconfig.patch b/target/linux/generic/hack-5.15/251-kconfig.patch new file mode 100644 index 0000000000..34a63eaa7c --- /dev/null +++ b/target/linux/generic/hack-5.15/251-kconfig.patch @@ -0,0 +1,199 @@ +From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 7 Jul 2017 17:09:21 +0200 +Subject: kconfig: owrt specifc dependencies + +Signed-off-by: John Crispin +--- + crypto/Kconfig | 10 +++++----- + drivers/bcma/Kconfig | 1 + + drivers/ssb/Kconfig | 3 ++- + lib/Kconfig | 8 ++++---- + net/netfilter/Kconfig | 2 +- + net/wireless/Kconfig | 17 ++++++++++------- + sound/core/Kconfig | 4 ++-- + 7 files changed, 25 insertions(+), 20 deletions(-) + +--- a/crypto/Kconfig ++++ b/crypto/Kconfig +@@ -33,7 +33,7 @@ config CRYPTO_FIPS + this is. + + config CRYPTO_ALGAPI +- tristate ++ tristate "ALGAPI" + select CRYPTO_ALGAPI2 + help + This option provides the API for cryptographic algorithms. +@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2 + tristate + + config CRYPTO_AEAD +- tristate ++ tristate "AEAD" + select CRYPTO_AEAD2 + select CRYPTO_ALGAPI + +@@ -53,7 +53,7 @@ config CRYPTO_AEAD2 + select CRYPTO_RNG2 + + config CRYPTO_SKCIPHER +- tristate ++ tristate "SKCIPHER" + select CRYPTO_SKCIPHER2 + select CRYPTO_ALGAPI + +@@ -63,7 +63,7 @@ config CRYPTO_SKCIPHER2 + select CRYPTO_RNG2 + + config CRYPTO_HASH +- tristate ++ tristate "HASH" + select CRYPTO_HASH2 + select CRYPTO_ALGAPI + +@@ -72,7 +72,7 @@ config CRYPTO_HASH2 + select CRYPTO_ALGAPI2 + + config CRYPTO_RNG +- tristate ++ tristate "RNG" + select CRYPTO_RNG2 + select CRYPTO_ALGAPI + +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -16,6 +16,7 @@ if BCMA + # Support for Block-I/O. SELECT this from the driver that needs it. + config BCMA_BLOCKIO + bool ++ default y + + config BCMA_HOST_PCI_POSSIBLE + bool +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -29,6 +29,7 @@ config SSB_SPROM + config SSB_BLOCKIO + bool + depends on SSB ++ default y + + config SSB_PCIHOST_POSSIBLE + bool +@@ -49,7 +50,7 @@ config SSB_PCIHOST + config SSB_B43_PCI_BRIDGE + bool + depends on SSB_PCIHOST +- default n ++ default y + + config SSB_PCMCIAHOST_POSSIBLE + bool +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -418,16 +418,16 @@ config BCH_CONST_T + # Textsearch support is select'ed if needed + # + config TEXTSEARCH +- bool ++ bool "Textsearch support" + + config TEXTSEARCH_KMP +- tristate ++ tristate "Textsearch KMP" + + config TEXTSEARCH_BM +- tristate ++ tristate "Textsearch BM" + + config TEXTSEARCH_FSM +- tristate ++ tristate "Textsearch FSM" + + config BTREE + bool +--- a/net/netfilter/Kconfig ++++ b/net/netfilter/Kconfig +@@ -11,7 +11,7 @@ config NETFILTER_INGRESS + infrastructure. + + config NETFILTER_NETLINK +- tristate ++ tristate "Netfilter NFNETLINK interface" + + config NETFILTER_FAMILY_BRIDGE + bool +--- a/net/wireless/Kconfig ++++ b/net/wireless/Kconfig +@@ -1,6 +1,6 @@ + # SPDX-License-Identifier: GPL-2.0-only + config WIRELESS_EXT +- bool ++ bool "Wireless extensions" + + config WEXT_CORE + def_bool y +@@ -12,10 +12,10 @@ config WEXT_PROC + depends on WEXT_CORE + + config WEXT_SPY +- bool ++ bool "WEXT_SPY" + + config WEXT_PRIV +- bool ++ bool "WEXT_PRIV" + + config CFG80211 + tristate "cfg80211 - wireless configuration API" +@@ -204,7 +204,7 @@ config CFG80211_WEXT_EXPORT + endif # CFG80211 + + config LIB80211 +- tristate ++ tristate "LIB80211" + default n + help + This options enables a library of common routines used +@@ -213,17 +213,17 @@ config LIB80211 + Drivers should select this themselves if needed. + + config LIB80211_CRYPT_WEP +- tristate ++ tristate "LIB80211_CRYPT_WEP" + select CRYPTO_LIB_ARC4 + + config LIB80211_CRYPT_CCMP +- tristate ++ tristate "LIB80211_CRYPT_CCMP" + select CRYPTO + select CRYPTO_AES + select CRYPTO_CCM + + config LIB80211_CRYPT_TKIP +- tristate ++ tristate "LIB80211_CRYPT_TKIP" + select CRYPTO_LIB_ARC4 + + config LIB80211_DEBUG +--- a/sound/core/Kconfig ++++ b/sound/core/Kconfig +@@ -17,7 +17,7 @@ config SND_DMAENGINE_PCM + tristate + + config SND_HWDEP +- tristate ++ tristate "Sound hardware support" + + config SND_SEQ_DEVICE + tristate +@@ -27,7 +27,7 @@ config SND_RAWMIDI + select SND_SEQ_DEVICE if SND_SEQUENCER != n + + config SND_COMPRESS_OFFLOAD +- tristate ++ tristate "Compression offloading support" + + config SND_JACK + bool diff --git a/target/linux/generic/hack-5.15/252-SATA_PMP.patch b/target/linux/generic/hack-5.15/252-SATA_PMP.patch new file mode 100644 index 0000000000..6502d1d6ed --- /dev/null +++ b/target/linux/generic/hack-5.15/252-SATA_PMP.patch @@ -0,0 +1,23 @@ +From 8c817e33be829c7249c2cfd59ff48ad5fac6a31d Mon Sep 17 00:00:00 2001 +From: Sungbo Eo +Date: Fri, 7 Jul 2017 17:09:21 +0200 +Subject: [PATCH] kconfig: solidify SATA_PMP config + +SATA_PMP option in kernel config file disappears for every kernel_oldconfig refresh. +To prevent this, SATA_HOST is now selected automatically when SATA_PMP is enabled. +This patch can be dropped if SATA_MV is ever re-added into the config. +--- + drivers/ata/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -112,7 +112,7 @@ config SATA_ZPODD + + config SATA_PMP + bool "SATA Port Multiplier support" +- depends on SATA_HOST ++ select SATA_HOST + default y + help + This option adds support for SATA Port Multipliers diff --git a/target/linux/generic/hack-5.15/253-ksmbd-config.patch b/target/linux/generic/hack-5.15/253-ksmbd-config.patch new file mode 100644 index 0000000000..c2b2a96b9c --- /dev/null +++ b/target/linux/generic/hack-5.15/253-ksmbd-config.patch @@ -0,0 +1,22 @@ +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -2379,7 +2379,7 @@ config PADATA + bool + + config ASN1 +- tristate ++ tristate "ASN1" + help + Build a simple ASN.1 grammar compiler that produces a bytecode output + that can be interpreted by the ASN.1 stream decoder and used to +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -589,7 +589,7 @@ config LIBFDT + bool + + config OID_REGISTRY +- tristate ++ tristate "OID" + help + Enable fast lookup object identifier registry. + diff --git a/target/linux/generic/hack-5.15/259-regmap_dynamic.patch b/target/linux/generic/hack-5.15/259-regmap_dynamic.patch new file mode 100644 index 0000000000..bc81a7285c --- /dev/null +++ b/target/linux/generic/hack-5.15/259-regmap_dynamic.patch @@ -0,0 +1,135 @@ +From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 15 Jul 2017 21:12:38 +0200 +Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules + +lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998 +Signed-off-by: Felix Fietkau +--- + drivers/base/regmap/Kconfig | 15 ++++++++++----- + drivers/base/regmap/Makefile | 12 ++++++++---- + drivers/base/regmap/regmap.c | 3 +++ + include/linux/regmap.h | 2 +- + 4 files changed, 22 insertions(+), 10 deletions(-) + +--- a/drivers/base/regmap/Kconfig ++++ b/drivers/base/regmap/Kconfig +@@ -4,9 +4,8 @@ + # subsystems should select the appropriate symbols. + + config REGMAP +- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM) + select IRQ_DOMAIN if REGMAP_IRQ +- bool ++ tristate + + config REGCACHE_COMPRESSED + select LZO_COMPRESS +@@ -14,46 +13,59 @@ config REGCACHE_COMPRESSED + bool + + config REGMAP_AC97 ++ select REGMAP + tristate + + config REGMAP_I2C + tristate ++ select REGMAP + depends on I2C + + config REGMAP_SLIMBUS + tristate ++ select REGMAP + depends on SLIMBUS + + config REGMAP_SPI + tristate ++ select REGMAP ++ depends on SPI_MASTER + depends on SPI + + config REGMAP_SPMI + tristate ++ select REGMAP + depends on SPMI + + config REGMAP_W1 + tristate ++ select REGMAP + depends on W1 + + config REGMAP_MMIO + tristate ++ select REGMAP + + config REGMAP_IRQ + bool ++ select REGMAP + + config REGMAP_SOUNDWIRE + tristate ++ select REGMAP + depends on SOUNDWIRE + + config REGMAP_SCCB + tristate ++ select REGMAP + depends on I2C + + config REGMAP_I3C + tristate ++ select REGMAP + depends on I3C + + config REGMAP_SPI_AVMM + tristate ++ select REGMAP + depends on SPI +--- a/drivers/base/regmap/Makefile ++++ b/drivers/base/regmap/Makefile +@@ -2,10 +2,14 @@ + # For include/trace/define_trace.h to include trace.h + CFLAGS_regmap.o := -I$(src) + +-obj-$(CONFIG_REGMAP) += regmap.o regcache.o +-obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o +-obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o +-obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o ++regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o ++ifdef CONFIG_DEBUG_FS ++regmap-core-objs += regmap-debugfs.o ++endif ++ifdef CONFIG_REGCACHE_COMPRESSED ++regmap-core-objs += regcache-lzo.o ++endif ++obj-$(CONFIG_REGMAP) += regmap-core.o + obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o + obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o + obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o +--- a/drivers/base/regmap/regmap.c ++++ b/drivers/base/regmap/regmap.c +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -3298,3 +3299,5 @@ static int __init regmap_initcall(void) + return 0; + } + postcore_initcall(regmap_initcall); ++ ++MODULE_LICENSE("GPL"); +--- a/include/linux/regmap.h ++++ b/include/linux/regmap.h +@@ -179,7 +179,7 @@ struct reg_sequence { + __ret ?: __tmp; \ + }) + +-#ifdef CONFIG_REGMAP ++#if IS_REACHABLE(CONFIG_REGMAP) + + enum regmap_endian { + /* Unspecified -> 0 -> Backwards compatible default */ diff --git a/target/linux/generic/hack-5.15/260-crypto_test_dependencies.patch b/target/linux/generic/hack-5.15/260-crypto_test_dependencies.patch new file mode 100644 index 0000000000..1eab709c46 --- /dev/null +++ b/target/linux/generic/hack-5.15/260-crypto_test_dependencies.patch @@ -0,0 +1,52 @@ +From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:12:51 +0200 +Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run + +Reduces kernel size after LZMA by about 5k on MIPS + +lede-commit: 044c316167e076479a344c59905e5b435b84a77f +Signed-off-by: Felix Fietkau +--- + crypto/Kconfig | 13 ++++++------- + crypto/algboss.c | 4 ++++ + 2 files changed, 10 insertions(+), 7 deletions(-) + +--- a/crypto/Kconfig ++++ b/crypto/Kconfig +@@ -120,13 +120,13 @@ config CRYPTO_MANAGER + cbc(aes). + + config CRYPTO_MANAGER2 +- def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y) +- select CRYPTO_AEAD2 +- select CRYPTO_HASH2 +- select CRYPTO_SKCIPHER2 +- select CRYPTO_AKCIPHER2 +- select CRYPTO_KPP2 +- select CRYPTO_ACOMP2 ++ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS) ++ select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS ++ select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS ++ select CRYPTO_SKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS ++ select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS ++ select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS ++ select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS + + config CRYPTO_USER + tristate "Userspace cryptographic algorithm configuration" +--- a/crypto/algboss.c ++++ b/crypto/algboss.c +@@ -230,8 +230,12 @@ static int cryptomgr_schedule_test(struc + type = alg->cra_flags; + + /* Do not test internal algorithms. */ ++#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS ++ type |= CRYPTO_ALG_TESTED; ++#else + if (type & CRYPTO_ALG_INTERNAL) + type |= CRYPTO_ALG_TESTED; ++#endif + + param->type = type; + diff --git a/target/linux/generic/hack-5.15/261-lib-arc4-unhide.patch b/target/linux/generic/hack-5.15/261-lib-arc4-unhide.patch new file mode 100644 index 0000000000..a7668acfad --- /dev/null +++ b/target/linux/generic/hack-5.15/261-lib-arc4-unhide.patch @@ -0,0 +1,15 @@ +This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We +need this to be able to compile this into the kernel and make use of it +from backports. + +--- a/lib/crypto/Kconfig ++++ b/lib/crypto/Kconfig +@@ -6,7 +6,7 @@ config CRYPTO_LIB_AES + tristate + + config CRYPTO_LIB_ARC4 +- tristate ++ tristate "ARC4 cipher library" + + config CRYPTO_ARCH_HAVE_LIB_BLAKE2S + tristate diff --git a/target/linux/generic/hack-5.15/280-rfkill-stubs.patch b/target/linux/generic/hack-5.15/280-rfkill-stubs.patch new file mode 100644 index 0000000000..2e48aea1cf --- /dev/null +++ b/target/linux/generic/hack-5.15/280-rfkill-stubs.patch @@ -0,0 +1,84 @@ +From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 7 Jul 2017 17:13:44 +0200 +Subject: rfkill: add fake rfkill support + +allow building of modules depending on RFKILL even if RFKILL is not enabled. + +Signed-off-by: John Crispin +--- + include/linux/rfkill.h | 2 +- + net/Makefile | 2 +- + net/rfkill/Kconfig | 14 +++++++++----- + net/rfkill/Makefile | 2 +- + 4 files changed, 12 insertions(+), 8 deletions(-) + +--- a/include/linux/rfkill.h ++++ b/include/linux/rfkill.h +@@ -64,7 +64,7 @@ struct rfkill_ops { + int (*set_block)(void *data, bool blocked); + }; + +-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ++#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE) + /** + * rfkill_alloc - Allocate rfkill structure + * @name: name of the struct -- the string is not copied internally +--- a/net/Makefile ++++ b/net/Makefile +@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC) += tipc/ + obj-$(CONFIG_NETLABEL) += netlabel/ + obj-$(CONFIG_IUCV) += iucv/ + obj-$(CONFIG_SMC) += smc/ +-obj-$(CONFIG_RFKILL) += rfkill/ ++obj-$(CONFIG_RFKILL_FULL) += rfkill/ + obj-$(CONFIG_NET_9P) += 9p/ + obj-$(CONFIG_CAIF) += caif/ + ifneq ($(CONFIG_DCB),) +--- a/net/rfkill/Kconfig ++++ b/net/rfkill/Kconfig +@@ -2,7 +2,11 @@ + # + # RF switch subsystem configuration + # +-menuconfig RFKILL ++config RFKILL ++ bool ++ default y ++ ++menuconfig RFKILL_FULL + tristate "RF switch subsystem support" + help + Say Y here if you want to have control over RF switches +@@ -14,19 +18,19 @@ menuconfig RFKILL + # LED trigger support + config RFKILL_LEDS + bool +- depends on RFKILL ++ depends on RFKILL_FULL + depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS + default y + + config RFKILL_INPUT + bool "RF switch input support" if EXPERT +- depends on RFKILL ++ depends on RFKILL_FULL + depends on INPUT = y || RFKILL = INPUT + default y if !EXPERT + + config RFKILL_GPIO + tristate "GPIO RFKILL driver" +- depends on RFKILL ++ depends on RFKILL_FULL + depends on GPIOLIB || COMPILE_TEST + default n + help +--- a/net/rfkill/Makefile ++++ b/net/rfkill/Makefile +@@ -5,5 +5,5 @@ + + rfkill-y += core.o + rfkill-$(CONFIG_RFKILL_INPUT) += input.o +-obj-$(CONFIG_RFKILL) += rfkill.o ++obj-$(CONFIG_RFKILL_FULL) += rfkill.o + obj-$(CONFIG_RFKILL_GPIO) += rfkill-gpio.o diff --git a/target/linux/generic/hack-5.15/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-5.15/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch new file mode 100644 index 0000000000..fe89de7e08 --- /dev/null +++ b/target/linux/generic/hack-5.15/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch @@ -0,0 +1,64 @@ +From: Ben Menchaca +Date: Fri, 7 Jun 2013 18:35:22 -0500 +Subject: MIPS: r4k_cache: use more efficient cache blast + +Optimize the compiler output for larger cache blast cases that are +common for DMA-based networking. + +Signed-off-by: Ben Menchaca +Signed-off-by: Felix Fietkau +--- +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -296,14 +296,46 @@ static inline void prot##extra##blast_## + unsigned long end) \ + { \ + unsigned long lsize = cpu_##desc##_line_size(); \ ++ unsigned long lsize_2 = lsize * 2; \ ++ unsigned long lsize_3 = lsize * 3; \ ++ unsigned long lsize_4 = lsize * 4; \ ++ unsigned long lsize_5 = lsize * 5; \ ++ unsigned long lsize_6 = lsize * 6; \ ++ unsigned long lsize_7 = lsize * 7; \ ++ unsigned long lsize_8 = lsize * 8; \ + unsigned long addr = start & ~(lsize - 1); \ +- unsigned long aend = (end - 1) & ~(lsize - 1); \ ++ unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \ ++ int lines = (aend - addr) / lsize; \ + \ +- while (1) { \ ++ while (lines >= 8) { \ ++ prot##cache_op(hitop, addr); \ ++ prot##cache_op(hitop, addr + lsize); \ ++ prot##cache_op(hitop, addr + lsize_2); \ ++ prot##cache_op(hitop, addr + lsize_3); \ ++ prot##cache_op(hitop, addr + lsize_4); \ ++ prot##cache_op(hitop, addr + lsize_5); \ ++ prot##cache_op(hitop, addr + lsize_6); \ ++ prot##cache_op(hitop, addr + lsize_7); \ ++ addr += lsize_8; \ ++ lines -= 8; \ ++ } \ ++ \ ++ if (lines & 0x4) { \ ++ prot##cache_op(hitop, addr); \ ++ prot##cache_op(hitop, addr + lsize); \ ++ prot##cache_op(hitop, addr + lsize_2); \ ++ prot##cache_op(hitop, addr + lsize_3); \ ++ addr += lsize_4; \ ++ } \ ++ \ ++ if (lines & 0x2) { \ ++ prot##cache_op(hitop, addr); \ ++ prot##cache_op(hitop, addr + lsize); \ ++ addr += lsize_2; \ ++ } \ ++ \ ++ if (lines & 0x1) { \ + prot##cache_op(hitop, addr); \ +- if (addr == aend) \ +- break; \ +- addr += lsize; \ + } \ + } + diff --git a/target/linux/generic/hack-5.15/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-5.15/301-mips_image_cmdline_hack.patch new file mode 100644 index 0000000000..4edf527246 --- /dev/null +++ b/target/linux/generic/hack-5.15/301-mips_image_cmdline_hack.patch @@ -0,0 +1,38 @@ +From: John Crispin +Subject: hack: kernel: add generic image_cmdline hack to MIPS targets + +lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976 +Signed-off-by: Gabor Juhos +--- + arch/mips/Kconfig | 4 ++++ + arch/mips/kernel/head.S | 6 ++++++ + 2 files changed, 10 insertions(+) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -1170,6 +1170,10 @@ config MIPS_MSC + config SYNC_R4K + bool + ++config IMAGE_CMDLINE_HACK ++ bool "OpenWrt specific image command line hack" ++ default n ++ + config NO_IOPORT_MAP + def_bool n + +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S +@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry) + j kernel_entry + #endif /* CONFIG_BOOT_RAW */ + ++#ifdef CONFIG_IMAGE_CMDLINE_HACK ++ .ascii "CMDLINE:" ++EXPORT(__image_cmdline) ++ .fill 0x400 ++#endif /* CONFIG_IMAGE_CMDLINE_HACK */ ++ + __REF + + NESTED(kernel_entry, 16, sp) # kernel entry point diff --git a/target/linux/generic/hack-5.15/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-5.15/321-powerpc_crtsavres_prereq.patch new file mode 100644 index 0000000000..4bb438295d --- /dev/null +++ b/target/linux/generic/hack-5.15/321-powerpc_crtsavres_prereq.patch @@ -0,0 +1,38 @@ +From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001 +From: "Alexandros C. Couloumbis" +Date: Fri, 7 Jul 2017 17:14:51 +0200 +Subject: hack: arch: powerpc: drop register save/restore library from modules + +Upstream GCC uses a libgcc function for saving/restoring registers. This +makes the code bigger, and upstream kernels need to carry that function +for every single kernel module. Our GCC is patched to avoid those +references, so we can drop the extra bloat for modules. + +lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec +Signed-off-by: Alexandros C. Couloumbis +--- + arch/powerpc/Makefile | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/powerpc/Makefile ++++ b/arch/powerpc/Makefile +@@ -61,19 +61,6 @@ machine-$(CONFIG_PPC64) += 64 + machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le + UTS_MACHINE := $(subst $(space),,$(machine-y)) + +-# XXX This needs to be before we override LD below +-ifdef CONFIG_PPC32 +-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o +-else +-ifeq ($(call ld-ifversion, -ge, 225000000, y),y) +-# Have the linker provide sfpr if possible. +-# There is a corresponding test in arch/powerpc/lib/Makefile +-KBUILD_LDFLAGS_MODULE += --save-restore-funcs +-else +-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o +-endif +-endif +- + ifdef CONFIG_CPU_LITTLE_ENDIAN + KBUILD_CFLAGS += -mlittle-endian + KBUILD_LDFLAGS += -EL diff --git a/target/linux/generic/hack-5.15/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch b/target/linux/generic/hack-5.15/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch new file mode 100644 index 0000000000..04cf52b096 --- /dev/null +++ b/target/linux/generic/hack-5.15/401-mtd-super-don-t-reply-on-mtdblock-device-minor.patch @@ -0,0 +1,85 @@ +From f9760b158f610b1792a222cc924073724c061bfb Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 7 Apr 2021 22:37:57 +0100 +Subject: [PATCH 1/2] mtd: super: don't reply on mtdblock device minor +To: linux-mtd@lists.infradead.org +Cc: Vignesh Raghavendra , + Richard Weinberger , + Miquel Raynal , + David Woodhouse + +For blktrans devices with partitions (ie. part_bits != 0) the +assumption that the minor number of the mtdblock device matches +the mtdnum doesn't hold true. +Properly resolve mtd device from blktrans layer instead. + +Signed-off-by: Daniel Golle +--- + drivers/mtd/mtdsuper.c | 33 ++++++++++++++++++++++++++------- + 1 file changed, 26 insertions(+), 7 deletions(-) + +--- a/drivers/mtd/mtdsuper.c ++++ b/drivers/mtd/mtdsuper.c +@@ -9,6 +9,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -121,7 +122,8 @@ int get_tree_mtd(struct fs_context *fc, + { + #ifdef CONFIG_BLOCK + struct block_device *bdev; +- int ret, major; ++ struct mtd_blktrans_dev *blktrans_dev; ++ int ret, major, part_bits; + #endif + int mtdnr; + +@@ -169,21 +171,38 @@ int get_tree_mtd(struct fs_context *fc, + /* try the old way - the hack where we allowed users to mount + * /dev/mtdblock$(n) but didn't actually _use_ the blockdev + */ +- bdev = lookup_bdev(fc->source); ++ bdev = blkdev_get_by_path(fc->source, FMODE_READ, NULL); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + errorf(fc, "MTD: Couldn't look up '%s': %d", fc->source, ret); + return ret; + } +- pr_debug("MTDSB: lookup_bdev() returned 0\n"); ++ pr_debug("MTDSB: blkdev_get_by_path() returned 0\n"); + + major = MAJOR(bdev->bd_dev); +- mtdnr = MINOR(bdev->bd_dev); +- bdput(bdev); + +- if (major == MTD_BLOCK_MAJOR) +- return mtd_get_sb_by_nr(fc, mtdnr, fill_super); ++ if (major == MTD_BLOCK_MAJOR) { ++ if (!bdev->bd_disk) { ++ blkdev_put(bdev, FMODE_READ); ++ BUG(); ++ return -EINVAL; ++ } ++ ++ blktrans_dev = (struct mtd_blktrans_dev *)(bdev->bd_disk->private_data); ++ if (!blktrans_dev || !blktrans_dev->tr) { ++ blkdev_put(bdev, FMODE_READ); ++ BUG(); ++ return -EINVAL; ++ } ++ mtdnr = blktrans_dev->devnum; ++ part_bits = blktrans_dev->tr->part_bits; ++ blkdev_put(bdev, FMODE_READ); ++ if (MINOR(bdev->bd_dev) != (mtdnr << part_bits)) ++ return -EINVAL; + ++ return mtd_get_sb_by_nr(fc, mtdnr, fill_super); ++ } ++ blkdev_put(bdev, FMODE_READ); + #endif /* CONFIG_BLOCK */ + + if (!(fc->sb_flags & SB_SILENT)) diff --git a/target/linux/generic/hack-5.15/402-mtd-blktrans-call-add-disks-after-mtd-device.patch b/target/linux/generic/hack-5.15/402-mtd-blktrans-call-add-disks-after-mtd-device.patch new file mode 100644 index 0000000000..988d900b31 --- /dev/null +++ b/target/linux/generic/hack-5.15/402-mtd-blktrans-call-add-disks-after-mtd-device.patch @@ -0,0 +1,98 @@ +From 0bccc3722bdd88e8ae995e77ef9f7b77ee4cbdee Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 7 Apr 2021 22:45:54 +0100 +Subject: [PATCH 2/2] mtd: blktrans: call add disks after mtd device +To: linux-mtd@lists.infradead.org +Cc: Vignesh Raghavendra , + Richard Weinberger , + Miquel Raynal , + David Woodhouse + +Calling device_add_disk while holding mtd_table_mutex leads +to deadlock in case part_bits!=0 as block partition parsers +will try to open the newly created disks, trying to acquire +mutex once again. +Move device_add_disk to additional function called after +add partitions of an MTD device have been added and locks +have been released. + +Signed-off-by: Daniel Golle +--- + drivers/mtd/mtd_blkdevs.c | 33 ++++++++++++++++++++++++++------- + drivers/mtd/mtdcore.c | 3 +++ + include/linux/mtd/blktrans.h | 1 + + 3 files changed, 30 insertions(+), 7 deletions(-) + +--- a/drivers/mtd/mtd_blkdevs.c ++++ b/drivers/mtd/mtd_blkdevs.c +@@ -457,13 +457,6 @@ int add_mtd_blktrans_dev(struct mtd_blkt + if (new->readonly) + set_disk_ro(gd, 1); + +- device_add_disk(&new->mtd->dev, gd, NULL); +- +- if (new->disk_attributes) { +- ret = sysfs_create_group(&disk_to_dev(gd)->kobj, +- new->disk_attributes); +- WARN_ON(ret); +- } + return 0; + error4: + kfree(new->tag_set); +@@ -475,6 +468,27 @@ error1: + return ret; + } + ++void register_mtd_blktrans_devs(void) ++{ ++ struct mtd_blktrans_ops *tr; ++ struct mtd_blktrans_dev *dev, *next; ++ int ret; ++ ++ list_for_each_entry(tr, &blktrans_majors, list) { ++ list_for_each_entry_safe(dev, next, &tr->devs, list) { ++ if (dev->disk->flags & GENHD_FL_UP) ++ continue; ++ ++ device_add_disk(&dev->mtd->dev, dev->disk, NULL); ++ if (dev->disk_attributes) { ++ ret = sysfs_create_group(&disk_to_dev(dev->disk)->kobj, ++ dev->disk_attributes); ++ WARN_ON(ret); ++ } ++ } ++ } ++} ++ + int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old) + { + unsigned long flags; +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -31,6 +31,7 @@ + + #include + #include ++#include + + #include "mtdcore.h" + +@@ -851,6 +852,8 @@ int mtd_device_parse_register(struct mtd + register_reboot_notifier(&mtd->reboot_notifier); + } + ++ register_mtd_blktrans_devs(); ++ + out: + if (ret && device_is_registered(&mtd->dev)) + del_mtd_device(mtd); +--- a/include/linux/mtd/blktrans.h ++++ b/include/linux/mtd/blktrans.h +@@ -76,6 +76,6 @@ extern int deregister_mtd_blktrans(struc + extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); + extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); + extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev); +- ++extern void register_mtd_blktrans_devs(void); + + #endif /* __MTD_TRANS_H__ */ diff --git a/target/linux/generic/hack-5.15/410-block-fit-partition-parser.patch b/target/linux/generic/hack-5.15/410-block-fit-partition-parser.patch new file mode 100644 index 0000000000..7816356227 --- /dev/null +++ b/target/linux/generic/hack-5.15/410-block-fit-partition-parser.patch @@ -0,0 +1,224 @@ +--- a/block/blk.h ++++ b/block/blk.h +@@ -361,6 +361,8 @@ char *disk_name(struct gendisk *hd, int + #define ADDPART_FLAG_NONE 0 + #define ADDPART_FLAG_RAID 1 + #define ADDPART_FLAG_WHOLEDISK 2 ++#define ADDPART_FLAG_READONLY 4 ++#define ADDPART_FLAG_ROOTDEV 8 + void delete_partition(struct hd_struct *part); + int bdev_add_partition(struct block_device *bdev, int partno, + sector_t start, sector_t length); +--- a/block/partitions/Kconfig ++++ b/block/partitions/Kconfig +@@ -101,6 +101,13 @@ config ATARI_PARTITION + Say Y here if you would like to use hard disks under Linux which + were partitioned under the Atari OS. + ++config FIT_PARTITION ++ bool "Flattened-Image-Tree (FIT) partition support" if PARTITION_ADVANCED ++ default n ++ help ++ Say Y here if your system needs to mount the filesystem part of ++ a Flattened-Image-Tree (FIT) image commonly used with Das U-Boot. ++ + config IBM_PARTITION + bool "IBM disk label and partition support" + depends on PARTITION_ADVANCED && S390 +--- a/block/partitions/Makefile ++++ b/block/partitions/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_ACORN_PARTITION) += acorn.o + obj-$(CONFIG_AMIGA_PARTITION) += amiga.o + obj-$(CONFIG_ATARI_PARTITION) += atari.o + obj-$(CONFIG_AIX_PARTITION) += aix.o ++obj-$(CONFIG_FIT_PARTITION) += fit.o + obj-$(CONFIG_CMDLINE_PARTITION) += cmdline.o + obj-$(CONFIG_MAC_PARTITION) += mac.o + obj-$(CONFIG_LDM_PARTITION) += ldm.o +--- a/block/partitions/check.h ++++ b/block/partitions/check.h +@@ -58,6 +58,7 @@ int amiga_partition(struct parsed_partit + int atari_partition(struct parsed_partitions *state); + int cmdline_partition(struct parsed_partitions *state); + int efi_partition(struct parsed_partitions *state); ++int fit_partition(struct parsed_partitions *state); + int ibm_partition(struct parsed_partitions *); + int karma_partition(struct parsed_partitions *state); + int ldm_partition(struct parsed_partitions *state); +@@ -68,3 +69,5 @@ int sgi_partition(struct parsed_partitio + int sun_partition(struct parsed_partitions *state); + int sysv68_partition(struct parsed_partitions *state); + int ultrix_partition(struct parsed_partitions *state); ++ ++int parse_fit_partitions(struct parsed_partitions *state, u64 start_sector, u64 nr_sectors, int *slot, int add_remain); +--- a/block/partitions/core.c ++++ b/block/partitions/core.c +@@ -10,6 +10,10 @@ + #include + #include + #include ++#ifdef CONFIG_FIT_PARTITION ++#include ++#endif ++ + #include "check.h" + + static int (*check_part[])(struct parsed_partitions *) = { +@@ -46,6 +50,9 @@ static int (*check_part[])(struct parsed + #ifdef CONFIG_EFI_PARTITION + efi_partition, /* this must come before msdos */ + #endif ++#ifdef CONFIG_FIT_PARTITION ++ fit_partition, ++#endif + #ifdef CONFIG_SGI_PARTITION + sgi_partition, + #endif +@@ -694,6 +701,14 @@ static bool blk_add_partition(struct gen + (state->parts[p].flags & ADDPART_FLAG_RAID)) + md_autodetect_dev(part_to_dev(part)->devt); + ++#ifdef CONFIG_FIT_PARTITION ++ if ((state->parts[p].flags & ADDPART_FLAG_ROOTDEV) && ROOT_DEV == 0) ++ ROOT_DEV = part_to_dev(part)->devt; ++ ++ if (state->parts[p].flags & ADDPART_FLAG_READONLY) ++ part->policy = true; ++#endif ++ + return true; + } + +--- a/drivers/mtd/ubi/block.c ++++ b/drivers/mtd/ubi/block.c +@@ -396,7 +396,11 @@ int ubiblock_create(struct ubi_volume_in + dev->leb_size = vi->usable_leb_size; + + /* Initialize the gendisk of this ubiblock device */ ++#ifdef CONFIG_FIT_PARTITION ++ gd = alloc_disk(0); ++#else + gd = alloc_disk(1); ++#endif + if (!gd) { + pr_err("UBI: block: alloc_disk failed\n"); + ret = -ENODEV; +@@ -413,6 +417,9 @@ int ubiblock_create(struct ubi_volume_in + goto out_put_disk; + } + gd->private_data = dev; ++#ifdef CONFIG_FIT_PARTITION ++ gd->flags |= GENHD_FL_EXT_DEVT; ++#endif + sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id); + set_capacity(gd, disk_capacity); + dev->gd = gd; +--- a/block/partitions/efi.c ++++ b/block/partitions/efi.c +@@ -706,6 +706,9 @@ int efi_partition(struct parsed_partitio + gpt_entry *ptes = NULL; + u32 i; + unsigned ssz = bdev_logical_block_size(state->bdev) / 512; ++#ifdef CONFIG_FIT_PARTITION ++ u32 extra_slot = 64; ++#endif + + if (!find_valid_gpt(state, &gpt, &ptes) || !gpt || !ptes) { + kfree(gpt); +@@ -739,6 +742,11 @@ int efi_partition(struct parsed_partitio + ARRAY_SIZE(ptes[i].partition_name)); + utf16_le_to_7bit(ptes[i].partition_name, label_max, info->volname); + state->parts[i + 1].has_info = true; ++#ifdef CONFIG_FIT_PARTITION ++ /* If this is a U-Boot FIT volume it may have subpartitions */ ++ if (!efi_guidcmp(ptes[i].partition_type_guid, PARTITION_LINUX_FIT_GUID)) ++ (void) parse_fit_partitions(state, start * ssz, size * ssz, &extra_slot, 1); ++#endif + } + kfree(ptes); + kfree(gpt); +--- a/block/partitions/efi.h ++++ b/block/partitions/efi.h +@@ -52,6 +52,9 @@ + #define PARTITION_LINUX_LVM_GUID \ + EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \ + 0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28) ++#define PARTITION_LINUX_FIT_GUID \ ++ EFI_GUID( 0xcae9be83, 0xb15f, 0x49cc, \ ++ 0x86, 0x3f, 0x08, 0x1b, 0x74, 0x4a, 0x2d, 0x93) + + typedef struct _gpt_header { + __le64 signature; +--- a/drivers/mtd/mtdblock.c ++++ b/drivers/mtd/mtdblock.c +@@ -334,7 +334,11 @@ static void mtdblock_remove_dev(struct m + static struct mtd_blktrans_ops mtdblock_tr = { + .name = "mtdblock", + .major = MTD_BLOCK_MAJOR, ++#ifdef CONFIG_FIT_PARTITION ++ .part_bits = 2, ++#else + .part_bits = 0, ++#endif + .blksize = 512, + .open = mtdblock_open, + .flush = mtdblock_flush, +--- a/drivers/mtd/mtd_blkdevs.c ++++ b/drivers/mtd/mtd_blkdevs.c +@@ -407,18 +407,8 @@ int add_mtd_blktrans_dev(struct mtd_blkt + gd->first_minor = (new->devnum) << tr->part_bits; + gd->fops = &mtd_block_ops; + +- if (tr->part_bits) +- if (new->devnum < 26) +- snprintf(gd->disk_name, sizeof(gd->disk_name), +- "%s%c", tr->name, 'a' + new->devnum); +- else +- snprintf(gd->disk_name, sizeof(gd->disk_name), +- "%s%c%c", tr->name, +- 'a' - 1 + new->devnum / 26, +- 'a' + new->devnum % 26); +- else +- snprintf(gd->disk_name, sizeof(gd->disk_name), +- "%s%d", tr->name, new->devnum); ++ snprintf(gd->disk_name, sizeof(gd->disk_name), ++ "%s%d", tr->name, new->devnum); + + set_capacity(gd, ((u64)new->size * tr->blksize) >> 9); + +--- a/block/partitions/msdos.c ++++ b/block/partitions/msdos.c +@@ -563,6 +563,15 @@ static void parse_minix(struct parsed_pa + #endif /* CONFIG_MINIX_SUBPARTITION */ + } + ++static void parse_fit_mbr(struct parsed_partitions *state, ++ sector_t offset, sector_t size, int origin) ++{ ++#ifdef CONFIG_FIT_PARTITION ++ u32 extra_slot = 64; ++ (void) parse_fit_partitions(state, offset, size, &extra_slot, 1); ++#endif /* CONFIG_FIT_PARTITION */ ++} ++ + static struct { + unsigned char id; + void (*parse)(struct parsed_partitions *, sector_t, sector_t, int); +@@ -574,6 +583,7 @@ static struct { + {UNIXWARE_PARTITION, parse_unixware}, + {SOLARIS_X86_PARTITION, parse_solaris_x86}, + {NEW_SOLARIS_X86_PARTITION, parse_solaris_x86}, ++ {FIT_PARTITION, parse_fit_mbr}, + {0, NULL}, + }; + +--- a/include/linux/msdos_partition.h ++++ b/include/linux/msdos_partition.h +@@ -31,6 +31,7 @@ enum msdos_sys_ind { + LINUX_LVM_PARTITION = 0x8e, + LINUX_RAID_PARTITION = 0xfd, /* autodetect RAID partition */ + ++ FIT_PARTITION = 0x2e, /* U-Boot uImage.FIT */ + SOLARIS_X86_PARTITION = 0x82, /* also Linux swap partitions */ + NEW_SOLARIS_X86_PARTITION = 0xbf, + diff --git a/target/linux/generic/hack-5.15/420-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/hack-5.15/420-mtd-set-rootfs-to-be-root-dev.patch new file mode 100644 index 0000000000..b071ac61ec --- /dev/null +++ b/target/linux/generic/hack-5.15/420-mtd-set-rootfs-to-be-root-dev.patch @@ -0,0 +1,42 @@ +From: Gabor Juhos +Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore + +The current code only allows to automatically set +root device on MTD partitions. Move the code to MTD +core to allow to use it with all MTD devices. + +Signed-off-by: Gabor Juhos +--- + drivers/mtd/mtdcore.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -694,6 +695,19 @@ int add_mtd_device(struct mtd_info *mtd) + of this try_ nonsense, and no bitching about it + either. :) */ + __module_get(THIS_MODULE); ++ ++ if (!strcmp(mtd->name, "rootfs") && ++ IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && ++ ROOT_DEV == 0) { ++ unsigned int index = mtd->index; ++ pr_notice("mtd: device %d (%s) set to be root filesystem\n", ++ mtd->index, mtd->name); ++#ifdef CONFIG_FIT_PARTITION ++ index <<= 2; ++#endif ++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, index); ++ } ++ + return 0; + + fail_nvmem_add: diff --git a/target/linux/generic/hack-5.15/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch b/target/linux/generic/hack-5.15/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch new file mode 100644 index 0000000000..965a331a19 --- /dev/null +++ b/target/linux/generic/hack-5.15/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch @@ -0,0 +1,120 @@ +From 6fa9e3678eb002246df1280322b6a024853950a5 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 11 Oct 2021 00:53:14 +0200 +Subject: [PATCH] drivers: mtd: parsers: add nvmem support to cmdlinepart + +Assuming cmdlinepart is only one level deep partition scheme and that +static partition are also defined in DTS, we can assign an of_node for +partition declared from bootargs. cmdlinepart have priority than +fiexed-partition parser so in this specific case the parser doesn't +assign an of_node. Fix this by searching a defined of_node using a +similar fixed_partition parser and if a partition is found with the same +label, check that it has the same offset and size and return the DT +of_node to correctly use NVMEM cells. + +Signed-off-by: Ansuel Smith +--- + drivers/mtd/parsers/cmdlinepart.c | 71 +++++++++++++++++++++++++++++++ + 1 file changed, 71 insertions(+) + +--- a/drivers/mtd/parsers/cmdlinepart.c ++++ b/drivers/mtd/parsers/cmdlinepart.c +@@ -43,6 +43,7 @@ + #include + #include + #include ++#include + + /* debug macro */ + #if 0 +@@ -323,6 +324,68 @@ static int mtdpart_setup_real(char *s) + return 0; + } + ++static int search_fixed_partition(struct mtd_info *master, ++ struct mtd_partition *target_part, ++ struct mtd_partition *fixed_part) ++{ ++ struct device_node *mtd_node; ++ struct device_node *ofpart_node; ++ struct device_node *pp; ++ struct mtd_partition part; ++ const char *partname; ++ ++ mtd_node = mtd_get_of_node(master); ++ if (!mtd_node) ++ return -EINVAL; ++ ++ ofpart_node = of_get_child_by_name(mtd_node, "partitions"); ++ ++ for_each_child_of_node(ofpart_node, pp) { ++ const __be32 *reg; ++ int len; ++ int a_cells, s_cells; ++ ++ reg = of_get_property(pp, "reg", &len); ++ if (!reg) { ++ pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n", ++ master->name, pp, ++ mtd_node); ++ continue; ++ } ++ ++ a_cells = of_n_addr_cells(pp); ++ s_cells = of_n_size_cells(pp); ++ if (len / 4 != a_cells + s_cells) { ++ pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n", ++ master->name, pp, ++ mtd_node); ++ continue; ++ } ++ ++ part.offset = of_read_number(reg, a_cells); ++ part.size = of_read_number(reg + a_cells, s_cells); ++ part.of_node = pp; ++ ++ partname = of_get_property(pp, "label", &len); ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ part.name = partname; ++ ++ if (!strncmp(target_part->name, part.name, len)) { ++ if (part.offset != target_part->offset) ++ return -EINVAL; ++ ++ if (part.size != target_part->size) ++ return -EINVAL; ++ ++ memcpy(fixed_part, &part, sizeof(struct mtd_partition)); ++ return 0; ++ } ++ } ++ ++ return -EINVAL; ++} ++ + /* + * Main function to be called from the MTD mapping driver/device to + * obtain the partitioning information. At this point the command line +@@ -338,6 +401,7 @@ static int parse_cmdline_partitions(stru + int i, err; + struct cmdline_mtd_partition *part; + const char *mtd_id = master->name; ++ struct mtd_partition fixed_part; + + /* parse command line */ + if (!cmdline_parsed) { +@@ -382,6 +446,13 @@ static int parse_cmdline_partitions(stru + sizeof(*part->parts) * (part->num_parts - i)); + i--; + } ++ ++ err = search_fixed_partition(master, &part->parts[i], &fixed_part); ++ if (!err) { ++ part->parts[i].of_node = fixed_part.of_node; ++ pr_info("Found partition defined in DT for %s. Assigning OF node to support nvmem.", ++ part->parts[i].name); ++ } + } + + *pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts, diff --git a/target/linux/generic/hack-5.15/430-mtk-bmt-support.patch b/target/linux/generic/hack-5.15/430-mtk-bmt-support.patch new file mode 100644 index 0000000000..62ddd66bf2 --- /dev/null +++ b/target/linux/generic/hack-5.15/430-mtk-bmt-support.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -15,6 +15,10 @@ config MTD_NAND_ECC + bool + depends on MTD_NAND_CORE + ++config MTD_NAND_MTK_BMT ++ bool "Support MediaTek NAND Bad-block Management Table" ++ default n ++ + endmenu + + endmenu +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -2,6 +2,7 @@ + + nandcore-objs := core.o bbt.o + obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o ++obj-$(CONFIG_MTD_NAND_MTK_BMT) += mtk_bmt.o mtk_bmt_v2.o mtk_bmt_bbt.o mtk_bmt_nmbm.o + + obj-y += onenand/ + obj-y += raw/ diff --git a/target/linux/generic/hack-5.15/531-debloat_lzma.patch b/target/linux/generic/hack-5.15/531-debloat_lzma.patch new file mode 100644 index 0000000000..2f70eee3e9 --- /dev/null +++ b/target/linux/generic/hack-5.15/531-debloat_lzma.patch @@ -0,0 +1,1040 @@ +From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 15 Jul 2017 21:15:44 +0200 +Subject: lzma: de-bloat the lzma library used by jffs2 + +lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6 +Signed-off-by: Felix Fietkau +--- + include/linux/lzma/LzFind.h | 17 --- + include/linux/lzma/LzmaDec.h | 101 --------------- + include/linux/lzma/LzmaEnc.h | 20 --- + lib/lzma/LzFind.c | 287 ++++--------------------------------------- + lib/lzma/LzmaDec.c | 86 +------------ + lib/lzma/LzmaEnc.c | 172 ++------------------------ + 6 files changed, 42 insertions(+), 641 deletions(-) + +--- a/include/linux/lzma/LzFind.h ++++ b/include/linux/lzma/LzFind.h +@@ -55,11 +55,6 @@ typedef struct _CMatchFinder + + #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) + +-int MatchFinder_NeedMove(CMatchFinder *p); +-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); +-void MatchFinder_MoveBlock(CMatchFinder *p); +-void MatchFinder_ReadIfRequired(CMatchFinder *p); +- + void MatchFinder_Construct(CMatchFinder *p); + + /* Conditions: +@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p, + UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, + ISzAlloc *alloc); + void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); +-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); +-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); +- +-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, +- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, +- UInt32 *distances, UInt32 maxLen); + + /* + Conditions: +@@ -102,12 +91,6 @@ typedef struct _IMatchFinder + + void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); + +-void MatchFinder_Init(CMatchFinder *p); +-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); +-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); +-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); +-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); +- + #ifdef __cplusplus + } + #endif +--- a/include/linux/lzma/LzmaDec.h ++++ b/include/linux/lzma/LzmaDec.h +@@ -31,14 +31,6 @@ typedef struct _CLzmaProps + UInt32 dicSize; + } CLzmaProps; + +-/* LzmaProps_Decode - decodes properties +-Returns: +- SZ_OK +- SZ_ERROR_UNSUPPORTED - Unsupported properties +-*/ +- +-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); +- + + /* ---------- LZMA Decoder state ---------- */ + +@@ -70,8 +62,6 @@ typedef struct + + #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } + +-void LzmaDec_Init(CLzmaDec *p); +- + /* There are two types of LZMA streams: + 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. + 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ +@@ -108,97 +98,6 @@ typedef enum + + /* ELzmaStatus is used only as output value for function call */ + +- +-/* ---------- Interfaces ---------- */ +- +-/* There are 3 levels of interfaces: +- 1) Dictionary Interface +- 2) Buffer Interface +- 3) One Call Interface +- You can select any of these interfaces, but don't mix functions from different +- groups for same object. */ +- +- +-/* There are two variants to allocate state for Dictionary Interface: +- 1) LzmaDec_Allocate / LzmaDec_Free +- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs +- You can use variant 2, if you set dictionary buffer manually. +- For Buffer Interface you must always use variant 1. +- +-LzmaDec_Allocate* can return: +- SZ_OK +- SZ_ERROR_MEM - Memory allocation error +- SZ_ERROR_UNSUPPORTED - Unsupported properties +-*/ +- +-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); +-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); +- +-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); +-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); +- +-/* ---------- Dictionary Interface ---------- */ +- +-/* You can use it, if you want to eliminate the overhead for data copying from +- dictionary to some other external buffer. +- You must work with CLzmaDec variables directly in this interface. +- +- STEPS: +- LzmaDec_Constr() +- LzmaDec_Allocate() +- for (each new stream) +- { +- LzmaDec_Init() +- while (it needs more decompression) +- { +- LzmaDec_DecodeToDic() +- use data from CLzmaDec::dic and update CLzmaDec::dicPos +- } +- } +- LzmaDec_Free() +-*/ +- +-/* LzmaDec_DecodeToDic +- +- The decoding to internal dictionary buffer (CLzmaDec::dic). +- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! +- +-finishMode: +- It has meaning only if the decoding reaches output limit (dicLimit). +- LZMA_FINISH_ANY - Decode just dicLimit bytes. +- LZMA_FINISH_END - Stream must be finished after dicLimit. +- +-Returns: +- SZ_OK +- status: +- LZMA_STATUS_FINISHED_WITH_MARK +- LZMA_STATUS_NOT_FINISHED +- LZMA_STATUS_NEEDS_MORE_INPUT +- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK +- SZ_ERROR_DATA - Data error +-*/ +- +-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, +- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); +- +- +-/* ---------- Buffer Interface ---------- */ +- +-/* It's zlib-like interface. +- See LzmaDec_DecodeToDic description for information about STEPS and return results, +- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need +- to work with CLzmaDec variables manually. +- +-finishMode: +- It has meaning only if the decoding reaches output limit (*destLen). +- LZMA_FINISH_ANY - Decode just destLen bytes. +- LZMA_FINISH_END - Stream must be finished after (*destLen). +-*/ +- +-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, +- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); +- +- + /* ---------- One Call Interface ---------- */ + + /* LzmaDecode +--- a/include/linux/lzma/LzmaEnc.h ++++ b/include/linux/lzma/LzmaEnc.h +@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps + } CLzmaEncProps; + + void LzmaEncProps_Init(CLzmaEncProps *p); +-void LzmaEncProps_Normalize(CLzmaEncProps *p); +-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); +- + + /* ---------- CLzmaEncHandle Interface ---------- */ + +@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * + void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); + SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); + SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); +-SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, +- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); + SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, + int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); + +-/* ---------- One Call Interface ---------- */ +- +-/* LzmaEncode +-Return code: +- SZ_OK - OK +- SZ_ERROR_MEM - Memory allocation error +- SZ_ERROR_PARAM - Incorrect paramater +- SZ_ERROR_OUTPUT_EOF - output buffer overflow +- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) +-*/ +- +-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, +- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, +- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); +- + #ifdef __cplusplus + } + #endif +--- a/lib/lzma/LzFind.c ++++ b/lib/lzma/LzFind.c +@@ -14,9 +14,15 @@ + + #define kStartMaxLen 3 + ++#if 0 ++#define DIRECT_INPUT p->directInput ++#else ++#define DIRECT_INPUT 1 ++#endif ++ + static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc) + { +- if (!p->directInput) ++ if (!DIRECT_INPUT) + { + alloc->Free(alloc, p->bufferBase); + p->bufferBase = 0; +@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder + static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc) + { + UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv; +- if (p->directInput) ++ if (DIRECT_INPUT) + { + p->blockSize = blockSize; + return 1; +@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde + return (p->bufferBase != 0); + } + +-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } +-Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } ++static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } ++static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } + +-UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } ++static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } + +-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) ++static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) + { + p->posLimit -= subValue; + p->pos -= subValue; +@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch + { + if (p->streamEndWasReached || p->result != SZ_OK) + return; +- if (p->directInput) ++ if (DIRECT_INPUT) + { + UInt32 curSize = 0xFFFFFFFF - p->streamPos; + if (curSize > p->directInputRem) +@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch + } + } + +-void MatchFinder_MoveBlock(CMatchFinder *p) ++static void MatchFinder_MoveBlock(CMatchFinder *p) + { + memmove(p->bufferBase, + p->buffer - p->keepSizeBefore, +@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder + p->buffer = p->bufferBase + p->keepSizeBefore; + } + +-int MatchFinder_NeedMove(CMatchFinder *p) ++static int MatchFinder_NeedMove(CMatchFinder *p) + { +- if (p->directInput) ++ if (DIRECT_INPUT) + return 0; + /* if (p->streamEndWasReached) return 0; */ + return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter); + } + +-void MatchFinder_ReadIfRequired(CMatchFinder *p) +-{ +- if (p->streamEndWasReached) +- return; +- if (p->keepSizeAfter >= p->streamPos - p->pos) +- MatchFinder_ReadBlock(p); +-} +- + static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p) + { + if (MatchFinder_NeedMove(p)) +@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch + p->posLimit = p->pos + limit; + } + +-void MatchFinder_Init(CMatchFinder *p) ++static void MatchFinder_Init(CMatchFinder *p) + { + UInt32 i; + for (i = 0; i < p->hashSizeSum; i++) +@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM + return (p->pos - p->historySize - 1) & kNormalizeMask; + } + +-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) ++static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) + { + UInt32 i; + for (i = 0; i < numItems; i++) +@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat + MatchFinder_SetLimits(p); + } + +-static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, +- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, +- UInt32 *distances, UInt32 maxLen) +-{ +- son[_cyclicBufferPos] = curMatch; +- for (;;) +- { +- UInt32 delta = pos - curMatch; +- if (cutValue-- == 0 || delta >= _cyclicBufferSize) +- return distances; +- { +- const Byte *pb = cur - delta; +- curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)]; +- if (pb[maxLen] == cur[maxLen] && *pb == *cur) +- { +- UInt32 len = 0; +- while (++len != lenLimit) +- if (pb[len] != cur[len]) +- break; +- if (maxLen < len) +- { +- *distances++ = maxLen = len; +- *distances++ = delta - 1; +- if (len == lenLimit) +- return distances; +- } +- } +- } +- } +-} +- +-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, ++static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, + UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, + UInt32 *distances, UInt32 maxLen) + { +@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi + p->buffer++; \ + if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p); + +-#define MOVE_POS_RET MOVE_POS return offset; +- + static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; } + ++#define MOVE_POS_RET MatchFinder_MovePos(p); return offset; ++ + #define GET_MATCHES_HEADER2(minLen, ret_op) \ + UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \ + lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \ +@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi + distances + offset, maxLen) - distances); MOVE_POS_RET; + + #define SKIP_FOOTER \ +- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS; +- +-static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) +-{ +- UInt32 offset; +- GET_MATCHES_HEADER(2) +- HASH2_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- offset = 0; +- GET_MATCHES_FOOTER(offset, 1) +-} +- +-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) +-{ +- UInt32 offset; +- GET_MATCHES_HEADER(3) +- HASH_ZIP_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- offset = 0; +- GET_MATCHES_FOOTER(offset, 2) +-} +- +-static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) +-{ +- UInt32 hash2Value, delta2, maxLen, offset; +- GET_MATCHES_HEADER(3) +- +- HASH3_CALC; +- +- delta2 = p->pos - p->hash[hash2Value]; +- curMatch = p->hash[kFix3HashSize + hashValue]; +- +- p->hash[hash2Value] = +- p->hash[kFix3HashSize + hashValue] = p->pos; +- +- +- maxLen = 2; +- offset = 0; +- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) +- { +- for (; maxLen != lenLimit; maxLen++) +- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) +- break; +- distances[0] = maxLen; +- distances[1] = delta2 - 1; +- offset = 2; +- if (maxLen == lenLimit) +- { +- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); +- MOVE_POS_RET; +- } +- } +- GET_MATCHES_FOOTER(offset, maxLen) +-} ++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p); + + static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) + { +@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches + GET_MATCHES_FOOTER(offset, maxLen) + } + +-static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) +-{ +- UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; +- GET_MATCHES_HEADER(4) +- +- HASH4_CALC; +- +- delta2 = p->pos - p->hash[ hash2Value]; +- delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; +- curMatch = p->hash[kFix4HashSize + hashValue]; +- +- p->hash[ hash2Value] = +- p->hash[kFix3HashSize + hash3Value] = +- p->hash[kFix4HashSize + hashValue] = p->pos; +- +- maxLen = 1; +- offset = 0; +- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) +- { +- distances[0] = maxLen = 2; +- distances[1] = delta2 - 1; +- offset = 2; +- } +- if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) +- { +- maxLen = 3; +- distances[offset + 1] = delta3 - 1; +- offset += 2; +- delta2 = delta3; +- } +- if (offset != 0) +- { +- for (; maxLen != lenLimit; maxLen++) +- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) +- break; +- distances[offset - 2] = maxLen; +- if (maxLen == lenLimit) +- { +- p->son[p->cyclicBufferPos] = curMatch; +- MOVE_POS_RET; +- } +- } +- if (maxLen < 3) +- maxLen = 3; +- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), +- distances + offset, maxLen) - (distances)); +- MOVE_POS_RET +-} +- +-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) +-{ +- UInt32 offset; +- GET_MATCHES_HEADER(3) +- HASH_ZIP_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), +- distances, 2) - (distances)); +- MOVE_POS_RET +-} +- +-static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num) +-{ +- do +- { +- SKIP_HEADER(2) +- HASH2_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- SKIP_FOOTER +- } +- while (--num != 0); +-} +- +-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) +-{ +- do +- { +- SKIP_HEADER(3) +- HASH_ZIP_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- SKIP_FOOTER +- } +- while (--num != 0); +-} +- +-static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num) +-{ +- do +- { +- UInt32 hash2Value; +- SKIP_HEADER(3) +- HASH3_CALC; +- curMatch = p->hash[kFix3HashSize + hashValue]; +- p->hash[hash2Value] = +- p->hash[kFix3HashSize + hashValue] = p->pos; +- SKIP_FOOTER +- } +- while (--num != 0); +-} +- + static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) + { + do +@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF + while (--num != 0); + } + +-static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) +-{ +- do +- { +- UInt32 hash2Value, hash3Value; +- SKIP_HEADER(4) +- HASH4_CALC; +- curMatch = p->hash[kFix4HashSize + hashValue]; +- p->hash[ hash2Value] = +- p->hash[kFix3HashSize + hash3Value] = +- p->hash[kFix4HashSize + hashValue] = p->pos; +- p->son[p->cyclicBufferPos] = curMatch; +- MOVE_POS +- } +- while (--num != 0); +-} +- +-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) +-{ +- do +- { +- SKIP_HEADER(3) +- HASH_ZIP_CALC; +- curMatch = p->hash[hashValue]; +- p->hash[hashValue] = p->pos; +- p->son[p->cyclicBufferPos] = curMatch; +- MOVE_POS +- } +- while (--num != 0); +-} +- + void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable) + { + vTable->Init = (Mf_Init_Func)MatchFinder_Init; + vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte; + vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes; + vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos; +- if (!p->btMode) +- { +- vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches; +- vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip; +- } +- else if (p->numHashBytes == 2) +- { +- vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches; +- vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip; +- } +- else if (p->numHashBytes == 3) +- { +- vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches; +- vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip; +- } +- else +- { +- vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; +- vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; +- } ++ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; ++ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; + } +--- a/lib/lzma/LzmaDec.c ++++ b/lib/lzma/LzmaDec.c +@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p, + p->needFlush = 0; + } + +-void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) ++static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) + { + p->needFlush = 1; + p->remainLen = 0; +@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p + p->needInitState = 1; + } + +-void LzmaDec_Init(CLzmaDec *p) ++static void LzmaDec_Init(CLzmaDec *p) + { + p->dicPos = 0; + LzmaDec_InitDicAndState(p, True, True); +@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD + p->needInitState = 0; + } + +-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, ++static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, + ELzmaFinishMode finishMode, ELzmaStatus *status) + { + SizeT inSize = *srcLen; +@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si + return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; + } + +-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) +-{ +- SizeT outSize = *destLen; +- SizeT inSize = *srcLen; +- *srcLen = *destLen = 0; +- for (;;) +- { +- SizeT inSizeCur = inSize, outSizeCur, dicPos; +- ELzmaFinishMode curFinishMode; +- SRes res; +- if (p->dicPos == p->dicBufSize) +- p->dicPos = 0; +- dicPos = p->dicPos; +- if (outSize > p->dicBufSize - dicPos) +- { +- outSizeCur = p->dicBufSize; +- curFinishMode = LZMA_FINISH_ANY; +- } +- else +- { +- outSizeCur = dicPos + outSize; +- curFinishMode = finishMode; +- } +- +- res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); +- src += inSizeCur; +- inSize -= inSizeCur; +- *srcLen += inSizeCur; +- outSizeCur = p->dicPos - dicPos; +- memcpy(dest, p->dic + dicPos, outSizeCur); +- dest += outSizeCur; +- outSize -= outSizeCur; +- *destLen += outSizeCur; +- if (res != 0) +- return res; +- if (outSizeCur == 0 || outSize == 0) +- return SZ_OK; +- } +-} +- +-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) ++static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) + { + alloc->Free(alloc, p->probs); + p->probs = 0; + } + +-static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) +-{ +- alloc->Free(alloc, p->dic); +- p->dic = 0; +-} +- +-void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) +-{ +- LzmaDec_FreeProbs(p, alloc); +- LzmaDec_FreeDict(p, alloc); +-} +- +-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) ++static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) + { + UInt32 dicSize; + Byte d; +@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma + return SZ_OK; + } + +-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) ++static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) + { + CLzmaProps propNew; + RINOK(LzmaProps_Decode(&propNew, props, propsSize)); +@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p, + p->prop = propNew; + return SZ_OK; + } +- +-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) +-{ +- CLzmaProps propNew; +- SizeT dicBufSize; +- RINOK(LzmaProps_Decode(&propNew, props, propsSize)); +- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); +- dicBufSize = propNew.dicSize; +- if (p->dic == 0 || dicBufSize != p->dicBufSize) +- { +- LzmaDec_FreeDict(p, alloc); +- p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); +- if (p->dic == 0) +- { +- LzmaDec_FreeProbs(p, alloc); +- return SZ_ERROR_MEM; +- } +- } +- p->dicBufSize = dicBufSize; +- p->prop = propNew; +- return SZ_OK; +-} + + SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, +--- a/lib/lzma/LzmaEnc.c ++++ b/lib/lzma/LzmaEnc.c +@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p) + p->writeEndMark = 0; + } + +-void LzmaEncProps_Normalize(CLzmaEncProps *p) ++static void LzmaEncProps_Normalize(CLzmaEncProps *p) + { + int level = p->level; + if (level < 0) level = 5; +@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp + #endif + } + +-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) ++static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) + { + CLzmaEncProps props = *props2; + LzmaEncProps_Normalize(&props); +@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL + + #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } + +-UInt32 GetPosSlot1(UInt32 pos) ++static UInt32 GetPosSlot1(UInt32 pos) + { + UInt32 res; + BSR2_RET(pos, res); +@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos) + #define kNumLogBits (9 + (int)sizeof(size_t) / 2) + #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) + +-void LzmaEnc_FastPosInit(Byte *g_FastPos) ++static void LzmaEnc_FastPosInit(Byte *g_FastPos) + { + int c = 2, slotFast; + g_FastPos[0] = 0; +@@ -339,58 +339,6 @@ typedef struct + CSaveState saveState; + } CLzmaEnc; + +-void LzmaEnc_SaveState(CLzmaEncHandle pp) +-{ +- CLzmaEnc *p = (CLzmaEnc *)pp; +- CSaveState *dest = &p->saveState; +- int i; +- dest->lenEnc = p->lenEnc; +- dest->repLenEnc = p->repLenEnc; +- dest->state = p->state; +- +- for (i = 0; i < kNumStates; i++) +- { +- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); +- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); +- } +- for (i = 0; i < kNumLenToPosStates; i++) +- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); +- memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); +- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); +- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); +- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); +- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); +- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); +- memcpy(dest->reps, p->reps, sizeof(p->reps)); +- memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); +-} +- +-void LzmaEnc_RestoreState(CLzmaEncHandle pp) +-{ +- CLzmaEnc *dest = (CLzmaEnc *)pp; +- const CSaveState *p = &dest->saveState; +- int i; +- dest->lenEnc = p->lenEnc; +- dest->repLenEnc = p->repLenEnc; +- dest->state = p->state; +- +- for (i = 0; i < kNumStates; i++) +- { +- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); +- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); +- } +- for (i = 0; i < kNumLenToPosStates; i++) +- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); +- memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); +- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); +- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); +- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); +- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); +- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); +- memcpy(dest->reps, p->reps, sizeof(p->reps)); +- memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb)); +-} +- + SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2) + { + CLzmaEnc *p = (CLzmaEnc *)pp; +@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE + while (symbol < 0x10000); + } + +-void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) ++static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) + { + UInt32 i; + for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) +@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc + p->matchPriceCount = 0; + } + +-void LzmaEnc_Construct(CLzmaEnc *p) ++static void LzmaEnc_Construct(CLzmaEnc *p) + { + RangeEnc_Construct(&p->rc); + MatchFinder_Construct(&p->matchFinderBase); +@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc * + return p; + } + +-void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) ++static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) + { + alloc->Free(alloc, p->litProbs); + alloc->Free(alloc, p->saveState.litProbs); +@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl + p->saveState.litProbs = 0; + } + +-void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) ++static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) + { + #ifndef _7ZIP_ST + MatchFinderMt_Destruct(&p->matchFinderMt, allocBig); +@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U + return SZ_OK; + } + +-void LzmaEnc_Init(CLzmaEnc *p) ++static void LzmaEnc_Init(CLzmaEnc *p) + { + UInt32 i; + p->state = 0; +@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p) + p->lpMask = (1 << p->lp) - 1; + } + +-void LzmaEnc_InitPrices(CLzmaEnc *p) ++static void LzmaEnc_InitPrices(CLzmaEnc *p) + { + if (!p->fastMode) + { +@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn + return SZ_OK; + } + +-static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, +- ISzAlloc *alloc, ISzAlloc *allocBig) +-{ +- CLzmaEnc *p = (CLzmaEnc *)pp; +- p->matchFinderBase.stream = inStream; +- p->needInit = 1; +- p->rc.outStream = outStream; +- return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig); +-} +- +-SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp, +- ISeqInStream *inStream, UInt32 keepWindowSize, +- ISzAlloc *alloc, ISzAlloc *allocBig) +-{ +- CLzmaEnc *p = (CLzmaEnc *)pp; +- p->matchFinderBase.stream = inStream; +- p->needInit = 1; +- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); +-} +- + static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen) + { + p->matchFinderBase.directInput = 1; +@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc + p->matchFinderBase.directInputRem = srcLen; + } + +-SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, ++static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, + UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) + { + CLzmaEnc *p = (CLzmaEnc *)pp; +@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p + return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); + } + +-void LzmaEnc_Finish(CLzmaEncHandle pp) ++static void LzmaEnc_Finish(CLzmaEncHandle pp) + { + #ifndef _7ZIP_ST + CLzmaEnc *p = (CLzmaEnc *)pp; +@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo + return size; + } + +- +-UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) +-{ +- const CLzmaEnc *p = (CLzmaEnc *)pp; +- return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); +-} +- +-const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp) +-{ +- const CLzmaEnc *p = (CLzmaEnc *)pp; +- return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; +-} +- +-SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, +- Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) +-{ +- CLzmaEnc *p = (CLzmaEnc *)pp; +- UInt64 nowPos64; +- SRes res; +- CSeqOutStreamBuf outStream; +- +- outStream.funcTable.Write = MyWrite; +- outStream.data = dest; +- outStream.rem = *destLen; +- outStream.overflow = False; +- +- p->writeEndMark = False; +- p->finished = False; +- p->result = SZ_OK; +- +- if (reInit) +- LzmaEnc_Init(p); +- LzmaEnc_InitPrices(p); +- nowPos64 = p->nowPos64; +- RangeEnc_Init(&p->rc); +- p->rc.outStream = &outStream.funcTable; +- +- res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize); +- +- *unpackSize = (UInt32)(p->nowPos64 - nowPos64); +- *destLen -= outStream.rem; +- if (outStream.overflow) +- return SZ_ERROR_OUTPUT_EOF; +- +- return res; +-} +- + static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress) + { + SRes res = SZ_OK; +@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p, + return res; + } + +-SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress, +- ISzAlloc *alloc, ISzAlloc *allocBig) +-{ +- RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig)); +- return LzmaEnc_Encode2((CLzmaEnc *)pp, progress); +-} +- + SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size) + { + CLzmaEnc *p = (CLzmaEnc *)pp; +@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp + return SZ_ERROR_OUTPUT_EOF; + return res; + } +- +-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, +- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, +- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) +-{ +- CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc); +- SRes res; +- if (p == 0) +- return SZ_ERROR_MEM; +- +- res = LzmaEnc_SetProps(p, props); +- if (res == SZ_OK) +- { +- res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize); +- if (res == SZ_OK) +- res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen, +- writeEndMark, progress, alloc, allocBig); +- } +- +- LzmaEnc_Destroy(p, alloc, allocBig); +- return res; +-} diff --git a/target/linux/generic/hack-5.15/600-bridge_offload.patch b/target/linux/generic/hack-5.15/600-bridge_offload.patch new file mode 100644 index 0000000000..586353816c --- /dev/null +++ b/target/linux/generic/hack-5.15/600-bridge_offload.patch @@ -0,0 +1,817 @@ +--- a/include/linux/if_bridge.h ++++ b/include/linux/if_bridge.h +@@ -57,6 +57,7 @@ struct br_ip_list { + #define BR_MRP_LOST_CONT BIT(18) + #define BR_MRP_LOST_IN_CONT BIT(19) + #define BR_BPDU_FILTER BIT(20) ++#define BR_OFFLOAD BIT(21) + + #define BR_DEFAULT_AGEING_TIME (300 * HZ) + +--- a/net/bridge/Makefile ++++ b/net/bridge/Makefile +@@ -5,7 +5,7 @@ + + obj-$(CONFIG_BRIDGE) += bridge.o + +-bridge-y := br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \ ++bridge-y := br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o br_offload.o \ + br_ioctl.o br_stp.o br_stp_bpdu.o \ + br_stp_if.o br_stp_timer.o br_netlink.o \ + br_netlink_tunnel.o br_arp_nd_proxy.o +--- a/net/bridge/br.c ++++ b/net/bridge/br.c +@@ -18,6 +18,7 @@ + #include + + #include "br_private.h" ++#include "br_private_offload.h" + + /* + * Handle changes in state of network devices enslaved to a bridge. +@@ -332,6 +333,10 @@ static int __init br_init(void) + if (err) + goto err_out; + ++ err = br_offload_init(); ++ if (err) ++ goto err_out0; ++ + err = register_pernet_subsys(&br_net_ops); + if (err) + goto err_out1; +@@ -375,6 +380,8 @@ err_out3: + err_out2: + unregister_pernet_subsys(&br_net_ops); + err_out1: ++ br_offload_fini(); ++err_out0: + br_fdb_fini(); + err_out: + stp_proto_unregister(&br_stp_proto); +@@ -396,6 +403,7 @@ static void __exit br_deinit(void) + #if IS_ENABLED(CONFIG_ATM_LANE) + br_fdb_test_addr_hook = NULL; + #endif ++ br_offload_fini(); + br_fdb_fini(); + } + +--- a/net/bridge/br_device.c ++++ b/net/bridge/br_device.c +@@ -529,6 +529,8 @@ void br_dev_setup(struct net_device *dev + br->bridge_hello_time = br->hello_time = 2 * HZ; + br->bridge_forward_delay = br->forward_delay = 15 * HZ; + br->bridge_ageing_time = br->ageing_time = BR_DEFAULT_AGEING_TIME; ++ br->offload_cache_size = 128; ++ br->offload_cache_reserved = 8; + dev->max_mtu = ETH_MAX_MTU; + + br_netfilter_rtable_init(br); +--- a/net/bridge/br_fdb.c ++++ b/net/bridge/br_fdb.c +@@ -23,6 +23,7 @@ + #include + #include + #include "br_private.h" ++#include "br_private_offload.h" + + static const struct rhashtable_params br_fdb_rht_params = { + .head_offset = offsetof(struct net_bridge_fdb_entry, rhnode), +@@ -513,6 +514,8 @@ static struct net_bridge_fdb_entry *fdb_ + fdb->key.vlan_id = vid; + fdb->flags = flags; + fdb->updated = fdb->used = jiffies; ++ INIT_HLIST_HEAD(&fdb->offload_in); ++ INIT_HLIST_HEAD(&fdb->offload_out); + if (rhashtable_lookup_insert_fast(&br->fdb_hash_tbl, + &fdb->rhnode, + br_fdb_rht_params)) { +@@ -734,6 +737,8 @@ static void fdb_notify(struct net_bridge + struct sk_buff *skb; + int err = -ENOBUFS; + ++ br_offload_fdb_update(fdb); ++ + if (swdev_notify) + br_switchdev_fdb_notify(br, fdb, type); + +--- a/net/bridge/br_forward.c ++++ b/net/bridge/br_forward.c +@@ -16,6 +16,7 @@ + #include + #include + #include "br_private.h" ++#include "br_private_offload.h" + + /* Don't forward packets to originating port or forwarding disabled */ + static inline int should_deliver(const struct net_bridge_port *p, +@@ -32,6 +33,8 @@ static inline int should_deliver(const s + + int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb) + { ++ br_offload_output(skb); ++ + skb_push(skb, ETH_HLEN); + if (!is_skb_forwardable(skb->dev, skb)) + goto drop; +--- a/net/bridge/br_if.c ++++ b/net/bridge/br_if.c +@@ -25,6 +25,7 @@ + #include + + #include "br_private.h" ++#include "br_private_offload.h" + + /* + * Determine initial path cost based on speed. +@@ -427,7 +428,7 @@ static struct net_bridge_port *new_nbp(s + p->path_cost = port_cost(dev); + p->priority = 0x8000 >> BR_PORT_BITS; + p->port_no = index; +- p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD; ++ p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD | BR_OFFLOAD; + br_init_port(p); + br_set_state(p, BR_STATE_DISABLED); + br_stp_port_timer_init(p); +@@ -777,6 +778,9 @@ void br_port_flags_change(struct net_bri + + if (mask & BR_NEIGH_SUPPRESS) + br_recalculate_neigh_suppress_enabled(br); ++ ++ if (mask & BR_OFFLOAD) ++ br_offload_port_state(p); + } + + bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag) +--- a/net/bridge/br_input.c ++++ b/net/bridge/br_input.c +@@ -22,6 +22,7 @@ + #include + #include "br_private.h" + #include "br_private_tunnel.h" ++#include "br_private_offload.h" + + static int + br_netif_receive_skb(struct net *net, struct sock *sk, struct sk_buff *skb) +@@ -162,6 +163,7 @@ int br_handle_frame_finish(struct net *n + dst->used = now; + br_forward(dst->dst, skb, local_rcv, false); + } else { ++ br_offload_skb_disable(skb); + if (!mcast_hit) + br_flood(br, skb, pkt_type, local_rcv, false); + else +@@ -280,6 +282,9 @@ static rx_handler_result_t br_handle_fra + memset(skb->cb, 0, sizeof(struct br_input_skb_cb)); + + p = br_port_get_rcu(skb->dev); ++ if (br_offload_input(p, skb)) ++ return RX_HANDLER_CONSUMED; ++ + if (p->flags & BR_VLAN_TUNNEL) { + if (br_handle_ingress_vlan_tunnel(skb, p, + nbp_vlan_group_rcu(p))) +--- /dev/null ++++ b/net/bridge/br_offload.c +@@ -0,0 +1,436 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++#include ++#include ++#include "br_private.h" ++#include "br_private_offload.h" ++ ++static DEFINE_SPINLOCK(offload_lock); ++ ++struct bridge_flow_key { ++ u8 dest[ETH_ALEN]; ++ u8 src[ETH_ALEN]; ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ u16 vlan_tag; ++ bool vlan_present; ++#endif ++}; ++ ++struct bridge_flow { ++ struct net_bridge_port *port; ++ struct rhash_head node; ++ struct bridge_flow_key key; ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ bool vlan_out_present; ++ u16 vlan_out; ++#endif ++ ++ unsigned long used; ++ struct net_bridge_fdb_entry *fdb_in, *fdb_out; ++ struct hlist_node fdb_list_in, fdb_list_out; ++ ++ struct rcu_head rcu; ++}; ++ ++static const struct rhashtable_params flow_params = { ++ .automatic_shrinking = true, ++ .head_offset = offsetof(struct bridge_flow, node), ++ .key_len = sizeof(struct bridge_flow_key), ++ .key_offset = offsetof(struct bridge_flow, key), ++}; ++ ++static struct kmem_cache *offload_cache __read_mostly; ++ ++static void ++flow_rcu_free(struct rcu_head *head) ++{ ++ struct bridge_flow *flow; ++ ++ flow = container_of(head, struct bridge_flow, rcu); ++ kmem_cache_free(offload_cache, flow); ++} ++ ++static void ++__br_offload_flow_free(struct bridge_flow *flow) ++{ ++ flow->used = 0; ++ hlist_del(&flow->fdb_list_in); ++ hlist_del(&flow->fdb_list_out); ++ ++ call_rcu(&flow->rcu, flow_rcu_free); ++} ++ ++static void ++br_offload_flow_free(struct bridge_flow *flow) ++{ ++ if (rhashtable_remove_fast(&flow->port->offload.rht, &flow->node, ++ flow_params) != 0) ++ return; ++ ++ __br_offload_flow_free(flow); ++} ++ ++static bool ++br_offload_flow_fdb_refresh_time(struct bridge_flow *flow, ++ struct net_bridge_fdb_entry *fdb) ++{ ++ if (!time_after(flow->used, fdb->updated)) ++ return false; ++ ++ fdb->updated = flow->used; ++ ++ return true; ++} ++ ++ ++static void ++br_offload_flow_refresh_time(struct bridge_flow *flow) ++{ ++ br_offload_flow_fdb_refresh_time(flow, flow->fdb_in); ++ br_offload_flow_fdb_refresh_time(flow, flow->fdb_out); ++} ++ ++static void ++br_offload_destroy_cb(void *ptr, void *arg) ++{ ++ struct bridge_flow *flow = ptr; ++ ++ __br_offload_flow_free(flow); ++} ++ ++static bool ++br_offload_need_gc(struct net_bridge_port *p) ++{ ++ return (atomic_read(&p->offload.rht.nelems) + ++ p->br->offload_cache_reserved) >= p->br->offload_cache_size; ++} ++ ++static void ++br_offload_gc_work(struct work_struct *work) ++{ ++ struct rhashtable_iter hti; ++ struct net_bridge_port *p; ++ struct bridge_flow *gc_flow = NULL; ++ struct bridge_flow *flow; ++ unsigned long gc_used; ++ ++ p = container_of(work, struct net_bridge_port, offload.gc_work); ++ ++ if (!br_offload_need_gc(p)) ++ return; ++ ++ rhashtable_walk_enter(&p->offload.rht, &hti); ++ rhashtable_walk_start(&hti); ++ while ((flow = rhashtable_walk_next(&hti)) != NULL) { ++ unsigned long used; ++ ++ if (IS_ERR(flow)) ++ continue; ++ ++ used = READ_ONCE(flow->used); ++ if (!used) ++ continue; ++ ++ if (gc_flow && !time_before(used, gc_used)) ++ continue; ++ ++ gc_flow = flow; ++ gc_used = used; ++ } ++ rhashtable_walk_stop(&hti); ++ rhashtable_walk_exit(&hti); ++ ++ if (!gc_flow) ++ return; ++ ++ spin_lock_bh(&offload_lock); ++ if (br_offload_need_gc(p) && gc_flow && ++ gc_flow->used == gc_used) ++ br_offload_flow_free(gc_flow); ++ if (p->offload.enabled && br_offload_need_gc(p)) ++ queue_work(system_long_wq, work); ++ spin_unlock_bh(&offload_lock); ++ ++} ++ ++void br_offload_port_state(struct net_bridge_port *p) ++{ ++ struct net_bridge_port_offload *o = &p->offload; ++ bool enabled = true; ++ bool flush = false; ++ ++ if (p->state != BR_STATE_FORWARDING || ++ !(p->flags & BR_OFFLOAD)) ++ enabled = false; ++ ++ spin_lock_bh(&offload_lock); ++ if (o->enabled == enabled) ++ goto out; ++ ++ if (enabled) { ++ if (!o->gc_work.func) ++ INIT_WORK(&o->gc_work, br_offload_gc_work); ++ rhashtable_init(&o->rht, &flow_params); ++ } else { ++ flush = true; ++ rhashtable_free_and_destroy(&o->rht, br_offload_destroy_cb, o); ++ } ++ ++ o->enabled = enabled; ++ ++out: ++ spin_unlock_bh(&offload_lock); ++ ++ if (flush) ++ flush_work(&o->gc_work); ++} ++ ++void br_offload_fdb_update(const struct net_bridge_fdb_entry *fdb) ++{ ++ struct bridge_flow *f; ++ struct hlist_node *tmp; ++ ++ spin_lock_bh(&offload_lock); ++ ++ hlist_for_each_entry_safe(f, tmp, &fdb->offload_in, fdb_list_in) ++ br_offload_flow_free(f); ++ ++ hlist_for_each_entry_safe(f, tmp, &fdb->offload_out, fdb_list_out) ++ br_offload_flow_free(f); ++ ++ spin_unlock_bh(&offload_lock); ++} ++ ++static void ++br_offload_prepare_key(struct net_bridge_port *p, struct bridge_flow_key *key, ++ struct sk_buff *skb) ++{ ++ memset(key, 0, sizeof(*key)); ++ memcpy(key, eth_hdr(skb), 2 * ETH_ALEN); ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ if (!br_opt_get(p->br, BROPT_VLAN_ENABLED)) ++ return; ++ ++ if (!skb_vlan_tag_present(skb) || skb->vlan_proto != p->br->vlan_proto) ++ return; ++ ++ key->vlan_present = true; ++ key->vlan_tag = skb_vlan_tag_get_id(skb); ++#endif ++} ++ ++void br_offload_output(struct sk_buff *skb) ++{ ++ struct net_bridge_port_offload *o; ++ struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb; ++ struct net_bridge_port *p, *inp; ++ struct net_device *dev; ++ struct net_bridge_fdb_entry *fdb_in, *fdb_out; ++ struct net_bridge_vlan_group *vg; ++ struct bridge_flow_key key; ++ struct bridge_flow *flow; ++ u16 vlan; ++ ++ if (!cb->offload) ++ return; ++ ++ rcu_read_lock(); ++ ++ p = br_port_get_rcu(skb->dev); ++ if (!p) ++ goto out; ++ ++ o = &p->offload; ++ if (!o->enabled) ++ goto out; ++ ++ if (atomic_read(&p->offload.rht.nelems) >= p->br->offload_cache_size) ++ goto out; ++ ++ dev = dev_get_by_index_rcu(dev_net(p->br->dev), cb->input_ifindex); ++ if (!dev) ++ goto out; ++ ++ inp = br_port_get_rcu(dev); ++ if (!inp) ++ goto out; ++ ++ vg = nbp_vlan_group_rcu(inp); ++ vlan = cb->input_vlan_present ? cb->input_vlan_tag : br_get_pvid(vg); ++ fdb_in = br_fdb_find_rcu(p->br, eth_hdr(skb)->h_source, vlan); ++ if (!fdb_in) ++ goto out; ++ ++ vg = nbp_vlan_group_rcu(p); ++ vlan = skb_vlan_tag_present(skb) ? skb_vlan_tag_get_id(skb) : br_get_pvid(vg); ++ fdb_out = br_fdb_find_rcu(p->br, eth_hdr(skb)->h_dest, vlan); ++ if (!fdb_out) ++ goto out; ++ ++ br_offload_prepare_key(p, &key, skb); ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ key.vlan_present = cb->input_vlan_present; ++ key.vlan_tag = cb->input_vlan_tag; ++#endif ++ ++ flow = kmem_cache_alloc(offload_cache, GFP_ATOMIC); ++ flow->port = fdb_in->dst; ++ memcpy(&flow->key, &key, sizeof(key)); ++ ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ flow->vlan_out_present = skb_vlan_tag_present(skb); ++ flow->vlan_out = skb_vlan_tag_get(skb); ++#endif ++ ++ flow->fdb_in = fdb_in; ++ flow->fdb_out = fdb_out; ++ flow->used = jiffies; ++ ++ spin_lock_bh(&offload_lock); ++ if (!o->enabled || ++ atomic_read(&p->offload.rht.nelems) >= p->br->offload_cache_size || ++ rhashtable_insert_fast(&flow->port->offload.rht, &flow->node, flow_params)) { ++ kmem_cache_free(offload_cache, flow); ++ goto out_unlock; ++ } ++ ++ hlist_add_head(&flow->fdb_list_in, &fdb_in->offload_in); ++ hlist_add_head(&flow->fdb_list_out, &fdb_out->offload_out); ++ ++ if (br_offload_need_gc(p)) ++ queue_work(system_long_wq, &p->offload.gc_work); ++ ++out_unlock: ++ spin_unlock_bh(&offload_lock); ++ ++out: ++ rcu_read_unlock(); ++} ++ ++bool br_offload_input(struct net_bridge_port *p, struct sk_buff *skb) ++{ ++ struct net_bridge_port_offload *o = &p->offload; ++ struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb; ++ struct bridge_flow_key key; ++ struct net_bridge_port *dst; ++ struct bridge_flow *flow; ++ unsigned long now = jiffies; ++ bool ret = false; ++ ++ if (skb->len < sizeof(key)) ++ return false; ++ ++ if (!o->enabled) ++ return false; ++ ++ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) ++ return false; ++ ++ br_offload_prepare_key(p, &key, skb); ++ ++ rcu_read_lock(); ++ flow = rhashtable_lookup(&o->rht, &key, flow_params); ++ if (!flow) { ++ cb->offload = 1; ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ cb->input_vlan_present = key.vlan_present != 0; ++ cb->input_vlan_tag = key.vlan_tag; ++ cb->input_ifindex = p->dev->ifindex; ++#endif ++ goto out; ++ } ++ ++ if (flow->fdb_in->dst != p) ++ goto out; ++ ++ dst = flow->fdb_out->dst; ++ if (!dst) ++ goto out; ++ ++ ret = true; ++#ifdef CONFIG_BRIDGE_VLAN_FILTERING ++ if (!flow->vlan_out_present && key.vlan_present) { ++ __vlan_hwaccel_clear_tag(skb); ++ } else if (flow->vlan_out_present) { ++ if (skb_vlan_tag_present(skb) && ++ skb->vlan_proto != p->br->vlan_proto) { ++ /* Protocol-mismatch, empty out vlan_tci for new tag */ ++ skb_push(skb, ETH_HLEN); ++ skb = vlan_insert_tag_set_proto(skb, skb->vlan_proto, ++ skb_vlan_tag_get(skb)); ++ if (unlikely(!skb)) ++ goto out; ++ ++ skb_pull(skb, ETH_HLEN); ++ skb_reset_mac_len(skb); ++ } ++ ++ __vlan_hwaccel_put_tag(skb, p->br->vlan_proto, ++ flow->vlan_out); ++ } ++#endif ++ ++ skb->dev = dst->dev; ++ skb_push(skb, ETH_HLEN); ++ ++ if (skb_warn_if_lro(skb) || !is_skb_forwardable(skb->dev, skb)) { ++ kfree_skb(skb); ++ goto out; ++ } ++ ++ if (now - flow->used >= HZ) { ++ flow->used = now; ++ br_offload_flow_refresh_time(flow); ++ } ++ ++ skb_forward_csum(skb); ++ dev_queue_xmit(skb); ++ ++out: ++ rcu_read_unlock(); ++ return ret; ++} ++ ++static void ++br_offload_check_gc(struct net_bridge *br) ++{ ++ struct net_bridge_port *p; ++ ++ spin_lock_bh(&br->lock); ++ list_for_each_entry(p, &br->port_list, list) ++ if (br_offload_need_gc(p)) ++ queue_work(system_long_wq, &p->offload.gc_work); ++ spin_unlock_bh(&br->lock); ++} ++ ++ ++int br_offload_set_cache_size(struct net_bridge *br, unsigned long val) ++{ ++ br->offload_cache_size = val; ++ br_offload_check_gc(br); ++ ++ return 0; ++} ++ ++int br_offload_set_cache_reserved(struct net_bridge *br, unsigned long val) ++{ ++ br->offload_cache_reserved = val; ++ br_offload_check_gc(br); ++ ++ return 0; ++} ++ ++int __init br_offload_init(void) ++{ ++ offload_cache = kmem_cache_create("bridge_offload_cache", ++ sizeof(struct bridge_flow), ++ 0, SLAB_HWCACHE_ALIGN, NULL); ++ if (!offload_cache) ++ return -ENOMEM; ++ ++ return 0; ++} ++ ++void br_offload_fini(void) ++{ ++ kmem_cache_destroy(offload_cache); ++} +--- a/net/bridge/br_private.h ++++ b/net/bridge/br_private.h +@@ -207,7 +207,13 @@ struct net_bridge_fdb_entry { + unsigned long updated ____cacheline_aligned_in_smp; + unsigned long used; + +- struct rcu_head rcu; ++ union { ++ struct { ++ struct hlist_head offload_in; ++ struct hlist_head offload_out; ++ }; ++ struct rcu_head rcu; ++ }; + }; + + #define MDB_PG_FLAGS_PERMANENT BIT(0) +@@ -280,6 +286,12 @@ struct net_bridge_mdb_entry { + struct rcu_head rcu; + }; + ++struct net_bridge_port_offload { ++ struct rhashtable rht; ++ struct work_struct gc_work; ++ bool enabled; ++}; ++ + struct net_bridge_port { + struct net_bridge *br; + struct net_device *dev; +@@ -337,6 +349,7 @@ struct net_bridge_port { + u16 backup_redirected_cnt; + + struct bridge_stp_xstats stp_xstats; ++ struct net_bridge_port_offload offload; + }; + + #define kobj_to_brport(obj) container_of(obj, struct net_bridge_port, kobj) +@@ -475,6 +488,9 @@ struct net_bridge { + struct kobject *ifobj; + u32 auto_cnt; + ++ u32 offload_cache_size; ++ u32 offload_cache_reserved; ++ + #ifdef CONFIG_NET_SWITCHDEV + int offload_fwd_mark; + #endif +@@ -501,6 +517,10 @@ struct br_input_skb_cb { + #ifdef CONFIG_NETFILTER_FAMILY_BRIDGE + u8 br_netfilter_broute:1; + #endif ++ u8 offload:1; ++ u8 input_vlan_present:1; ++ u16 input_vlan_tag; ++ int input_ifindex; + + #ifdef CONFIG_NET_SWITCHDEV + int offload_fwd_mark; +--- /dev/null ++++ b/net/bridge/br_private_offload.h +@@ -0,0 +1,21 @@ ++#ifndef __BR_OFFLOAD_H ++#define __BR_OFFLOAD_H ++ ++bool br_offload_input(struct net_bridge_port *p, struct sk_buff *skb); ++void br_offload_output(struct sk_buff *skb); ++void br_offload_port_state(struct net_bridge_port *p); ++void br_offload_fdb_update(const struct net_bridge_fdb_entry *fdb); ++int br_offload_init(void); ++void br_offload_fini(void); ++int br_offload_set_cache_size(struct net_bridge *br, unsigned long val); ++int br_offload_set_cache_reserved(struct net_bridge *br, unsigned long val); ++ ++static inline void br_offload_skb_disable(struct sk_buff *skb) ++{ ++ struct br_input_skb_cb *cb = (struct br_input_skb_cb *)skb->cb; ++ ++ if (cb->offload) ++ cb->offload = 0; ++} ++ ++#endif +--- a/net/bridge/br_stp.c ++++ b/net/bridge/br_stp.c +@@ -12,6 +12,7 @@ + + #include "br_private.h" + #include "br_private_stp.h" ++#include "br_private_offload.h" + + /* since time values in bpdu are in jiffies and then scaled (1/256) + * before sending, make sure that is at least one STP tick. +@@ -52,6 +53,8 @@ void br_set_state(struct net_bridge_port + (unsigned int) p->port_no, p->dev->name, + br_port_state_names[p->state]); + ++ br_offload_port_state(p); ++ + if (p->br->stp_enabled == BR_KERNEL_STP) { + switch (p->state) { + case BR_STATE_BLOCKING: +--- a/net/bridge/br_sysfs_br.c ++++ b/net/bridge/br_sysfs_br.c +@@ -18,6 +18,7 @@ + #include + + #include "br_private.h" ++#include "br_private_offload.h" + + #define to_bridge(cd) ((struct net_bridge *)netdev_priv(to_net_dev(cd))) + +@@ -842,6 +843,38 @@ static ssize_t vlan_stats_per_port_store + static DEVICE_ATTR_RW(vlan_stats_per_port); + #endif + ++static ssize_t offload_cache_size_show(struct device *d, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct net_bridge *br = to_bridge(d); ++ return sprintf(buf, "%u\n", br->offload_cache_size); ++} ++ ++static ssize_t offload_cache_size_store(struct device *d, ++ struct device_attribute *attr, ++ const char *buf, size_t len) ++{ ++ return store_bridge_parm(d, buf, len, br_offload_set_cache_size); ++} ++static DEVICE_ATTR_RW(offload_cache_size); ++ ++static ssize_t offload_cache_reserved_show(struct device *d, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct net_bridge *br = to_bridge(d); ++ return sprintf(buf, "%u\n", br->offload_cache_reserved); ++} ++ ++static ssize_t offload_cache_reserved_store(struct device *d, ++ struct device_attribute *attr, ++ const char *buf, size_t len) ++{ ++ return store_bridge_parm(d, buf, len, br_offload_set_cache_reserved); ++} ++static DEVICE_ATTR_RW(offload_cache_reserved); ++ + static struct attribute *bridge_attrs[] = { + &dev_attr_forward_delay.attr, + &dev_attr_hello_time.attr, +@@ -896,6 +929,8 @@ static struct attribute *bridge_attrs[] + &dev_attr_vlan_stats_enabled.attr, + &dev_attr_vlan_stats_per_port.attr, + #endif ++ &dev_attr_offload_cache_size.attr, ++ &dev_attr_offload_cache_reserved.attr, + NULL + }; + +--- a/net/bridge/br_sysfs_if.c ++++ b/net/bridge/br_sysfs_if.c +@@ -234,6 +234,7 @@ BRPORT_ATTR_FLAG(broadcast_flood, BR_BCA + BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS); + BRPORT_ATTR_FLAG(isolated, BR_ISOLATED); + BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER); ++BRPORT_ATTR_FLAG(offload, BR_OFFLOAD); + + #ifdef CONFIG_BRIDGE_IGMP_SNOOPING + static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf) +@@ -288,6 +289,7 @@ static const struct brport_attribute *br + &brport_attr_isolated, + &brport_attr_bpdu_filter, + &brport_attr_backup_port, ++ &brport_attr_offload, + NULL + }; + +--- a/net/bridge/br_vlan_tunnel.c ++++ b/net/bridge/br_vlan_tunnel.c +@@ -15,6 +15,7 @@ + + #include "br_private.h" + #include "br_private_tunnel.h" ++#include "br_private_offload.h" + + static inline int br_vlan_tunid_cmp(struct rhashtable_compare_arg *arg, + const void *ptr) +@@ -180,6 +181,7 @@ int br_handle_ingress_vlan_tunnel(struct + skb_dst_drop(skb); + + __vlan_hwaccel_put_tag(skb, p->br->vlan_proto, vlan->vid); ++ br_offload_skb_disable(skb); + + return 0; + } +@@ -203,6 +205,7 @@ int br_handle_egress_vlan_tunnel(struct + if (err) + return err; + ++ br_offload_skb_disable(skb); + tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst); + if (tunnel_dst && dst_hold_safe(&tunnel_dst->dst)) + skb_dst_set(skb, &tunnel_dst->dst); diff --git a/target/linux/generic/hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch b/target/linux/generic/hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch new file mode 100644 index 0000000000..2d3fe01a75 --- /dev/null +++ b/target/linux/generic/hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch @@ -0,0 +1,212 @@ +From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001 +From: Kevin Darbyshire-Bryant +Date: Sat, 23 Mar 2019 09:29:49 +0000 +Subject: [PATCH] netfilter: connmark: introduce set-dscpmark + +set-dscpmark is a method of storing the DSCP of an ip packet into +conntrack mark. In combination with a suitable tc filter action +(act_ctinfo) DSCP values are able to be stored in the mark on egress and +restored on ingress across links that otherwise alter or bleach DSCP. + +This is useful for qdiscs such as CAKE which are able to shape according +to policies based on DSCP. + +Ingress classification is traditionally a challenging task since +iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT +lookups, hence are unable to see internal IPv4 addresses as used on the +typical home masquerading gateway. + +x_tables CONNMARK set-dscpmark target solves the problem of storing the +DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc +action to restore. + +The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a +32bit 'statemask'. The dscp mask must be 6 contiguous bits and +represents the area where the DSCP will be stored in the connmark. The +state mask is a minimum 1 bit length mask that must not overlap with the +dscpmask. It represents a flag which is set when the DSCP has been +stored in the conntrack mark. This is useful to implement a 'one shot' +iptables based classification where the 'complicated' iptables rules are +only run once to classify the connection on initial (egress) packet and +subsequent packets are all marked/restored with the same DSCP. A state +mask of zero disables the setting of a status bit/s. + +example syntax with a suitably modified iptables user space application: + +iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000 + +Would store the DSCP in the top 6 bits of the 32bit mark field, and use +the LSB of the top byte as the 'DSCP has been stored' marker. + +|----0xFC----conntrack mark----000000---| +| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| +| DSCP | unused | flag |unused | +|-----------------------0x01---000000---| + ^ ^ + | | + ---| Conditional flag + | set this when dscp +|-ip diffserv-| stored in mark +| 6 bits | +|-------------| + +an identically configured tc action to restore looks like: + +tc filter show dev eth0 ingress +filter parent ffff: protocol all pref 10 u32 chain 0 +filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1 +filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw + match 00000000/00000000 at 0 + action order 1: ctinfo zone 0 pipe + index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000 + + action order 2: mirred (Egress Redirect to device ifb4eth0) stolen + index 1 ref 1 bind 1 + +|----0xFC----conntrack mark----000000---| +| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| +| DSCP | unused | flag |unused | +|-----------------------0x01---000000---| + | | + | | + ---| Conditional flag + v only restore if set +|-ip diffserv-| +| 6 bits | +|-------------| + +Signed-off-by: Kevin Darbyshire-Bryant +--- + include/uapi/linux/netfilter/xt_connmark.h | 10 ++++ + net/netfilter/xt_connmark.c | 55 ++++++++++++++++++---- + 2 files changed, 57 insertions(+), 8 deletions(-) + +--- a/include/uapi/linux/netfilter/xt_connmark.h ++++ b/include/uapi/linux/netfilter/xt_connmark.h +@@ -20,6 +20,11 @@ enum { + }; + + enum { ++ XT_CONNMARK_VALUE = (1 << 0), ++ XT_CONNMARK_DSCP = (1 << 1) ++}; ++ ++enum { + D_SHIFT_LEFT = 0, + D_SHIFT_RIGHT, + }; +@@ -34,6 +39,11 @@ struct xt_connmark_tginfo2 { + __u8 shift_dir, shift_bits, mode; + }; + ++struct xt_connmark_tginfo3 { ++ __u32 ctmark, ctmask, nfmask; ++ __u8 shift_dir, shift_bits, mode, func; ++}; ++ + struct xt_connmark_mtinfo1 { + __u32 mark, mask; + __u8 invert; +--- a/net/netfilter/xt_connmark.c ++++ b/net/netfilter/xt_connmark.c +@@ -24,12 +24,13 @@ MODULE_ALIAS("ipt_connmark"); + MODULE_ALIAS("ip6t_connmark"); + + static unsigned int +-connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info) ++connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info) + { + enum ip_conntrack_info ctinfo; + u_int32_t new_targetmark; + struct nf_conn *ct; + u_int32_t newmark; ++ u_int8_t dscp; + + ct = nf_ct_get(skb, &ctinfo); + if (ct == NULL) +@@ -37,12 +38,24 @@ connmark_tg_shift(struct sk_buff *skb, c + + switch (info->mode) { + case XT_CONNMARK_SET: +- newmark = (ct->mark & ~info->ctmask) ^ info->ctmark; +- if (info->shift_dir == D_SHIFT_RIGHT) +- newmark >>= info->shift_bits; +- else +- newmark <<= info->shift_bits; ++ newmark = ct->mark; ++ if (info->func & XT_CONNMARK_VALUE) { ++ newmark = (newmark & ~info->ctmask) ^ info->ctmark; ++ if (info->shift_dir == D_SHIFT_RIGHT) ++ newmark >>= info->shift_bits; ++ else ++ newmark <<= info->shift_bits; ++ } else if (info->func & XT_CONNMARK_DSCP) { ++ if (skb->protocol == htons(ETH_P_IP)) ++ dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2; ++ else if (skb->protocol == htons(ETH_P_IPV6)) ++ dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2; ++ else /* protocol doesn't have diffserv */ ++ break; + ++ newmark = (newmark & ~info->ctmark) | ++ (info->ctmask | (dscp << info->shift_bits)); ++ } + if (ct->mark != newmark) { + ct->mark = newmark; + nf_conntrack_event_cache(IPCT_MARK, ct); +@@ -81,20 +94,36 @@ static unsigned int + connmark_tg(struct sk_buff *skb, const struct xt_action_param *par) + { + const struct xt_connmark_tginfo1 *info = par->targinfo; +- const struct xt_connmark_tginfo2 info2 = { ++ const struct xt_connmark_tginfo3 info3 = { + .ctmark = info->ctmark, + .ctmask = info->ctmask, + .nfmask = info->nfmask, + .mode = info->mode, ++ .func = XT_CONNMARK_VALUE + }; + +- return connmark_tg_shift(skb, &info2); ++ return connmark_tg_shift(skb, &info3); + } + + static unsigned int + connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par) + { + const struct xt_connmark_tginfo2 *info = par->targinfo; ++ const struct xt_connmark_tginfo3 info3 = { ++ .ctmark = info->ctmark, ++ .ctmask = info->ctmask, ++ .nfmask = info->nfmask, ++ .mode = info->mode, ++ .func = XT_CONNMARK_VALUE ++ }; ++ ++ return connmark_tg_shift(skb, &info3); ++} ++ ++static unsigned int ++connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par) ++{ ++ const struct xt_connmark_tginfo3 *info = par->targinfo; + + return connmark_tg_shift(skb, info); + } +@@ -165,6 +194,16 @@ static struct xt_target connmark_tg_reg[ + .targetsize = sizeof(struct xt_connmark_tginfo2), + .destroy = connmark_tg_destroy, + .me = THIS_MODULE, ++ }, ++ { ++ .name = "CONNMARK", ++ .revision = 3, ++ .family = NFPROTO_UNSPEC, ++ .checkentry = connmark_tg_check, ++ .target = connmark_tg_v3, ++ .targetsize = sizeof(struct xt_connmark_tginfo3), ++ .destroy = connmark_tg_destroy, ++ .me = THIS_MODULE, + } + }; + diff --git a/target/linux/generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch b/target/linux/generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch new file mode 100644 index 0000000000..23332534bb --- /dev/null +++ b/target/linux/generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch @@ -0,0 +1,819 @@ +From: Felix Fietkau +Date: Tue, 20 Feb 2018 15:56:02 +0100 +Subject: [PATCH] netfilter: add xt_FLOWOFFLOAD target + +Signed-off-by: Felix Fietkau +--- + create mode 100644 net/netfilter/xt_OFFLOAD.c + +--- a/net/ipv4/netfilter/Kconfig ++++ b/net/ipv4/netfilter/Kconfig +@@ -56,8 +56,6 @@ config NF_TABLES_ARP + help + This option enables the ARP support for nf_tables. + +-endif # NF_TABLES +- + config NF_FLOW_TABLE_IPV4 + tristate "Netfilter flow table IPv4 module" + depends on NF_FLOW_TABLE +@@ -66,6 +64,8 @@ config NF_FLOW_TABLE_IPV4 + + To compile it as a module, choose M here. + ++endif # NF_TABLES ++ + config NF_DUP_IPV4 + tristate "Netfilter IPv4 packet duplication to alternate destination" + depends on !NF_CONNTRACK || NF_CONNTRACK +--- a/net/ipv6/netfilter/Kconfig ++++ b/net/ipv6/netfilter/Kconfig +@@ -45,7 +45,6 @@ config NFT_FIB_IPV6 + multicast or blackhole. + + endif # NF_TABLES_IPV6 +-endif # NF_TABLES + + config NF_FLOW_TABLE_IPV6 + tristate "Netfilter flow table IPv6 module" +@@ -55,6 +54,8 @@ config NF_FLOW_TABLE_IPV6 + + To compile it as a module, choose M here. + ++endif # NF_TABLES ++ + config NF_DUP_IPV6 + tristate "Netfilter IPv6 packet duplication to alternate destination" + depends on !NF_CONNTRACK || NF_CONNTRACK +--- a/net/netfilter/Kconfig ++++ b/net/netfilter/Kconfig +@@ -683,8 +683,6 @@ config NFT_FIB_NETDEV + + endif # NF_TABLES_NETDEV + +-endif # NF_TABLES +- + config NF_FLOW_TABLE_INET + tristate "Netfilter flow table mixed IPv4/IPv6 module" + depends on NF_FLOW_TABLE +@@ -693,11 +691,12 @@ config NF_FLOW_TABLE_INET + + To compile it as a module, choose M here. + ++endif # NF_TABLES ++ + config NF_FLOW_TABLE + tristate "Netfilter flow table module" + depends on NETFILTER_INGRESS + depends on NF_CONNTRACK +- depends on NF_TABLES + help + This option adds the flow table core infrastructure. + +@@ -977,6 +976,15 @@ config NETFILTER_XT_TARGET_NOTRACK + depends on NETFILTER_ADVANCED + select NETFILTER_XT_TARGET_CT + ++config NETFILTER_XT_TARGET_FLOWOFFLOAD ++ tristate '"FLOWOFFLOAD" target support' ++ depends on NF_FLOW_TABLE ++ depends on NETFILTER_INGRESS ++ help ++ This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload ++ module to speed up processing of packets by bypassing the usual ++ netfilter chains ++ + config NETFILTER_XT_TARGET_RATEEST + tristate '"RATEEST" target support' + depends on NETFILTER_ADVANCED +--- a/net/netfilter/Makefile ++++ b/net/netfilter/Makefile +@@ -145,6 +145,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF + obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o + obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o + obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o ++obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o + obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o + obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o + obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o +--- /dev/null ++++ b/net/netfilter/xt_FLOWOFFLOAD.c +@@ -0,0 +1,657 @@ ++/* ++ * Copyright (C) 2018-2021 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct xt_flowoffload_hook { ++ struct hlist_node list; ++ struct nf_hook_ops ops; ++ struct net *net; ++ bool registered; ++ bool used; ++}; ++ ++struct xt_flowoffload_table { ++ struct nf_flowtable ft; ++ struct hlist_head hooks; ++ struct delayed_work work; ++}; ++ ++static DEFINE_SPINLOCK(hooks_lock); ++ ++struct xt_flowoffload_table flowtable[2]; ++ ++static unsigned int ++xt_flowoffload_net_hook(void *priv, struct sk_buff *skb, ++ const struct nf_hook_state *state) ++{ ++ struct nf_flowtable *ft = priv; ++ ++ if (!atomic_read(&ft->rhashtable.nelems)) ++ return NF_ACCEPT; ++ ++ switch (skb->protocol) { ++ case htons(ETH_P_IP): ++ return nf_flow_offload_ip_hook(priv, skb, state); ++ case htons(ETH_P_IPV6): ++ return nf_flow_offload_ipv6_hook(priv, skb, state); ++ } ++ ++ return NF_ACCEPT; ++} ++ ++static int ++xt_flowoffload_create_hook(struct xt_flowoffload_table *table, ++ struct net_device *dev) ++{ ++ struct xt_flowoffload_hook *hook; ++ struct nf_hook_ops *ops; ++ ++ hook = kzalloc(sizeof(*hook), GFP_ATOMIC); ++ if (!hook) ++ return -ENOMEM; ++ ++ ops = &hook->ops; ++ ops->pf = NFPROTO_NETDEV; ++ ops->hooknum = NF_NETDEV_INGRESS; ++ ops->priority = 10; ++ ops->priv = &table->ft; ++ ops->hook = xt_flowoffload_net_hook; ++ ops->dev = dev; ++ ++ hlist_add_head(&hook->list, &table->hooks); ++ mod_delayed_work(system_power_efficient_wq, &table->work, 0); ++ ++ return 0; ++} ++ ++static struct xt_flowoffload_hook * ++flow_offload_lookup_hook(struct xt_flowoffload_table *table, ++ struct net_device *dev) ++{ ++ struct xt_flowoffload_hook *hook; ++ ++ hlist_for_each_entry(hook, &table->hooks, list) { ++ if (hook->ops.dev == dev) ++ return hook; ++ } ++ ++ return NULL; ++} ++ ++static void ++xt_flowoffload_check_device(struct xt_flowoffload_table *table, ++ struct net_device *dev) ++{ ++ struct xt_flowoffload_hook *hook; ++ ++ if (!dev) ++ return; ++ ++ spin_lock_bh(&hooks_lock); ++ hook = flow_offload_lookup_hook(table, dev); ++ if (hook) ++ hook->used = true; ++ else ++ xt_flowoffload_create_hook(table, dev); ++ spin_unlock_bh(&hooks_lock); ++} ++ ++static void ++xt_flowoffload_register_hooks(struct xt_flowoffload_table *table) ++{ ++ struct xt_flowoffload_hook *hook; ++ ++restart: ++ hlist_for_each_entry(hook, &table->hooks, list) { ++ if (hook->registered) ++ continue; ++ ++ hook->registered = true; ++ hook->net = dev_net(hook->ops.dev); ++ spin_unlock_bh(&hooks_lock); ++ nf_register_net_hook(hook->net, &hook->ops); ++ if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD) ++ table->ft.type->setup(&table->ft, hook->ops.dev, ++ FLOW_BLOCK_BIND); ++ spin_lock_bh(&hooks_lock); ++ goto restart; ++ } ++ ++} ++ ++static bool ++xt_flowoffload_cleanup_hooks(struct xt_flowoffload_table *table) ++{ ++ struct xt_flowoffload_hook *hook; ++ bool active = false; ++ ++restart: ++ spin_lock_bh(&hooks_lock); ++ hlist_for_each_entry(hook, &table->hooks, list) { ++ if (hook->used || !hook->registered) { ++ active = true; ++ continue; ++ } ++ ++ hlist_del(&hook->list); ++ spin_unlock_bh(&hooks_lock); ++ if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD) ++ table->ft.type->setup(&table->ft, hook->ops.dev, ++ FLOW_BLOCK_UNBIND); ++ nf_unregister_net_hook(hook->net, &hook->ops); ++ kfree(hook); ++ goto restart; ++ } ++ spin_unlock_bh(&hooks_lock); ++ ++ return active; ++} ++ ++static void ++xt_flowoffload_check_hook(struct flow_offload *flow, void *data) ++{ ++ struct xt_flowoffload_table *table = data; ++ struct flow_offload_tuple *tuple0 = &flow->tuplehash[0].tuple; ++ struct flow_offload_tuple *tuple1 = &flow->tuplehash[1].tuple; ++ struct xt_flowoffload_hook *hook; ++ ++ spin_lock_bh(&hooks_lock); ++ hlist_for_each_entry(hook, &table->hooks, list) { ++ if (hook->ops.dev->ifindex != tuple0->iifidx && ++ hook->ops.dev->ifindex != tuple1->iifidx) ++ continue; ++ ++ hook->used = true; ++ } ++ spin_unlock_bh(&hooks_lock); ++} ++ ++static void ++xt_flowoffload_hook_work(struct work_struct *work) ++{ ++ struct xt_flowoffload_table *table; ++ struct xt_flowoffload_hook *hook; ++ int err; ++ ++ table = container_of(work, struct xt_flowoffload_table, work.work); ++ ++ spin_lock_bh(&hooks_lock); ++ xt_flowoffload_register_hooks(table); ++ hlist_for_each_entry(hook, &table->hooks, list) ++ hook->used = false; ++ spin_unlock_bh(&hooks_lock); ++ ++ err = nf_flow_table_iterate(&table->ft, xt_flowoffload_check_hook, ++ table); ++ if (err && err != -EAGAIN) ++ goto out; ++ ++ if (!xt_flowoffload_cleanup_hooks(table)) ++ return; ++ ++out: ++ queue_delayed_work(system_power_efficient_wq, &table->work, HZ); ++} ++ ++static bool ++xt_flowoffload_skip(struct sk_buff *skb, int family) ++{ ++ if (skb_sec_path(skb)) ++ return true; ++ ++ if (family == NFPROTO_IPV4) { ++ const struct ip_options *opt = &(IPCB(skb)->opt); ++ ++ if (unlikely(opt->optlen)) ++ return true; ++ } ++ ++ return false; ++} ++ ++static bool flow_is_valid_ether_device(const struct net_device *dev) ++{ ++ if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER || ++ dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr)) ++ return false; ++ ++ return true; ++} ++ ++static void ++xt_flowoffload_route_check_path(struct nf_flow_route *route, ++ const struct nf_conn *ct, ++ enum ip_conntrack_dir dir, ++ struct net_device **out_dev) ++{ ++ const struct dst_entry *dst = route->tuple[dir].dst; ++ const void *daddr = &ct->tuplehash[!dir].tuple.src.u3; ++ struct net_device_path_stack stack; ++ enum net_device_path_type prev_type; ++ struct net_device *dev = dst->dev; ++ struct neighbour *n; ++ bool last = false; ++ u8 nud_state; ++ int i; ++ ++ route->tuple[!dir].in.ifindex = dev->ifindex; ++ route->tuple[dir].out.ifindex = dev->ifindex; ++ ++ if (route->tuple[dir].xmit_type == FLOW_OFFLOAD_XMIT_XFRM) ++ return; ++ ++ if ((dev->flags & IFF_LOOPBACK) || ++ dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN || ++ !is_valid_ether_addr(dev->dev_addr)) ++ return; ++ ++ n = dst_neigh_lookup(dst, daddr); ++ if (!n) ++ return; ++ ++ read_lock_bh(&n->lock); ++ nud_state = n->nud_state; ++ memcpy(route->tuple[dir].out.h_dest, n->ha, ETH_ALEN); ++ read_unlock_bh(&n->lock); ++ neigh_release(n); ++ ++ if (!(nud_state & NUD_VALID)) ++ return; ++ ++ if (dev_fill_forward_path(dev, route->tuple[dir].out.h_dest, &stack) || ++ !stack.num_paths) ++ return; ++ ++ prev_type = DEV_PATH_ETHERNET; ++ for (i = 0; i <= stack.num_paths; i++) { ++ const struct net_device_path *path = &stack.path[i]; ++ int n_encaps = route->tuple[!dir].in.num_encaps; ++ ++ dev = (struct net_device *)path->dev; ++ if (flow_is_valid_ether_device(dev)) { ++ if (route->tuple[dir].xmit_type != FLOW_OFFLOAD_XMIT_DIRECT) { ++ memcpy(route->tuple[dir].out.h_source, ++ dev->dev_addr, ETH_ALEN); ++ route->tuple[dir].out.ifindex = dev->ifindex; ++ } ++ route->tuple[dir].xmit_type = FLOW_OFFLOAD_XMIT_DIRECT; ++ } ++ ++ switch (path->type) { ++ case DEV_PATH_PPPOE: ++ case DEV_PATH_VLAN: ++ if (n_encaps >= NF_FLOW_TABLE_ENCAP_MAX || ++ i == stack.num_paths) { ++ last = true; ++ break; ++ } ++ ++ route->tuple[!dir].in.num_encaps++; ++ route->tuple[!dir].in.encap[n_encaps].id = path->encap.id; ++ route->tuple[!dir].in.encap[n_encaps].proto = path->encap.proto; ++ if (path->type == DEV_PATH_PPPOE) ++ memcpy(route->tuple[dir].out.h_dest, ++ path->encap.h_dest, ETH_ALEN); ++ break; ++ case DEV_PATH_BRIDGE: ++ switch (path->bridge.vlan_mode) { ++ case DEV_PATH_BR_VLAN_TAG: ++ if (n_encaps >= NF_FLOW_TABLE_ENCAP_MAX || ++ i == stack.num_paths) { ++ last = true; ++ break; ++ } ++ ++ route->tuple[!dir].in.num_encaps++; ++ route->tuple[!dir].in.encap[n_encaps].id = ++ path->bridge.vlan_id; ++ route->tuple[!dir].in.encap[n_encaps].proto = ++ path->bridge.vlan_proto; ++ break; ++ case DEV_PATH_BR_VLAN_UNTAG: ++ route->tuple[!dir].in.num_encaps--; ++ break; ++ case DEV_PATH_BR_VLAN_UNTAG_HW: ++ route->tuple[!dir].in.ingress_vlans |= BIT(n_encaps - 1); ++ break; ++ case DEV_PATH_BR_VLAN_KEEP: ++ break; ++ } ++ break; ++ default: ++ last = true; ++ break; ++ } ++ ++ if (last) ++ break; ++ } ++ ++ *out_dev = dev; ++ route->tuple[dir].out.hw_ifindex = dev->ifindex; ++ route->tuple[!dir].in.ifindex = dev->ifindex; ++} ++ ++static int ++xt_flowoffload_route_dir(struct nf_flow_route *route, const struct nf_conn *ct, ++ enum ip_conntrack_dir dir, ++ const struct xt_action_param *par, int ifindex) ++{ ++ struct dst_entry *dst = NULL; ++ struct flowi fl; ++ ++ memset(&fl, 0, sizeof(fl)); ++ switch (xt_family(par)) { ++ case NFPROTO_IPV4: ++ fl.u.ip4.daddr = ct->tuplehash[!dir].tuple.src.u3.ip; ++ fl.u.ip4.flowi4_oif = ifindex; ++ break; ++ case NFPROTO_IPV6: ++ fl.u.ip6.saddr = ct->tuplehash[!dir].tuple.dst.u3.in6; ++ fl.u.ip6.daddr = ct->tuplehash[!dir].tuple.src.u3.in6; ++ fl.u.ip6.flowi6_oif = ifindex; ++ break; ++ } ++ ++ nf_route(xt_net(par), &dst, &fl, false, xt_family(par)); ++ if (!dst) ++ return -ENOENT; ++ ++ route->tuple[dir].dst = dst; ++ if (dst_xfrm(dst)) ++ route->tuple[dir].xmit_type = FLOW_OFFLOAD_XMIT_XFRM; ++ else ++ route->tuple[dir].xmit_type = FLOW_OFFLOAD_XMIT_NEIGH; ++ ++ return 0; ++} ++ ++static int ++xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct, ++ const struct xt_action_param *par, ++ struct nf_flow_route *route, enum ip_conntrack_dir dir, ++ struct net_device **dev) ++{ ++ int ret; ++ ++ ret = xt_flowoffload_route_dir(route, ct, dir, par, ++ dev[dir]->ifindex); ++ if (ret) ++ return ret; ++ ++ ret = xt_flowoffload_route_dir(route, ct, !dir, par, ++ dev[!dir]->ifindex); ++ if (ret) ++ return ret; ++ ++ xt_flowoffload_route_check_path(route, ct, dir, &dev[!dir]); ++ xt_flowoffload_route_check_path(route, ct, !dir, &dev[dir]); ++ ++ return 0; ++} ++ ++static unsigned int ++flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par) ++{ ++ struct xt_flowoffload_table *table; ++ const struct xt_flowoffload_target_info *info = par->targinfo; ++ struct tcphdr _tcph, *tcph = NULL; ++ enum ip_conntrack_info ctinfo; ++ enum ip_conntrack_dir dir; ++ struct nf_flow_route route = {}; ++ struct flow_offload *flow = NULL; ++ struct net_device *devs[2] = {}; ++ struct nf_conn *ct; ++ struct net *net; ++ ++ if (xt_flowoffload_skip(skb, xt_family(par))) ++ return XT_CONTINUE; ++ ++ ct = nf_ct_get(skb, &ctinfo); ++ if (ct == NULL) ++ return XT_CONTINUE; ++ ++ switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) { ++ case IPPROTO_TCP: ++ if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED) ++ return XT_CONTINUE; ++ ++ tcph = skb_header_pointer(skb, par->thoff, ++ sizeof(_tcph), &_tcph); ++ if (unlikely(!tcph || tcph->fin || tcph->rst)) ++ return XT_CONTINUE; ++ break; ++ case IPPROTO_UDP: ++ break; ++ default: ++ return XT_CONTINUE; ++ } ++ ++ if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) || ++ ct->status & IPS_SEQ_ADJUST) ++ return XT_CONTINUE; ++ ++ if (!nf_ct_is_confirmed(ct)) ++ return XT_CONTINUE; ++ ++ devs[dir] = xt_out(par); ++ devs[!dir] = xt_in(par); ++ ++ if (!devs[dir] || !devs[!dir]) ++ return XT_CONTINUE; ++ ++ if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status)) ++ return XT_CONTINUE; ++ ++ dir = CTINFO2DIR(ctinfo); ++ ++ if (xt_flowoffload_route(skb, ct, par, &route, dir, devs) < 0) ++ goto err_flow_route; ++ ++ flow = flow_offload_alloc(ct); ++ if (!flow) ++ goto err_flow_alloc; ++ ++ if (flow_offload_route_init(flow, &route) < 0) ++ goto err_flow_add; ++ ++ if (tcph) { ++ ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL; ++ ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL; ++ } ++ ++ table = &flowtable[!!(info->flags & XT_FLOWOFFLOAD_HW)]; ++ ++ net = read_pnet(&table->ft.net); ++ if (!net) ++ write_pnet(&table->ft.net, xt_net(par)); ++ ++ if (flow_offload_add(&table->ft, flow) < 0) ++ goto err_flow_add; ++ ++ xt_flowoffload_check_device(table, devs[0]); ++ xt_flowoffload_check_device(table, devs[1]); ++ ++ dst_release(route.tuple[dir].dst); ++ dst_release(route.tuple[!dir].dst); ++ ++ return XT_CONTINUE; ++ ++err_flow_add: ++ flow_offload_free(flow); ++err_flow_alloc: ++ dst_release(route.tuple[dir].dst); ++ dst_release(route.tuple[!dir].dst); ++err_flow_route: ++ clear_bit(IPS_OFFLOAD_BIT, &ct->status); ++ ++ return XT_CONTINUE; ++} ++ ++static int flowoffload_chk(const struct xt_tgchk_param *par) ++{ ++ struct xt_flowoffload_target_info *info = par->targinfo; ++ ++ if (info->flags & ~XT_FLOWOFFLOAD_MASK) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static struct xt_target offload_tg_reg __read_mostly = { ++ .family = NFPROTO_UNSPEC, ++ .name = "FLOWOFFLOAD", ++ .revision = 0, ++ .targetsize = sizeof(struct xt_flowoffload_target_info), ++ .usersize = sizeof(struct xt_flowoffload_target_info), ++ .checkentry = flowoffload_chk, ++ .target = flowoffload_tg, ++ .me = THIS_MODULE, ++}; ++ ++static int flow_offload_netdev_event(struct notifier_block *this, ++ unsigned long event, void *ptr) ++{ ++ struct xt_flowoffload_hook *hook0, *hook1; ++ struct net_device *dev = netdev_notifier_info_to_dev(ptr); ++ ++ if (event != NETDEV_UNREGISTER) ++ return NOTIFY_DONE; ++ ++ spin_lock_bh(&hooks_lock); ++ hook0 = flow_offload_lookup_hook(&flowtable[0], dev); ++ if (hook0) ++ hlist_del(&hook0->list); ++ ++ hook1 = flow_offload_lookup_hook(&flowtable[1], dev); ++ if (hook1) ++ hlist_del(&hook1->list); ++ spin_unlock_bh(&hooks_lock); ++ ++ if (hook0) { ++ nf_unregister_net_hook(hook0->net, &hook0->ops); ++ kfree(hook0); ++ } ++ ++ if (hook1) { ++ nf_unregister_net_hook(hook1->net, &hook1->ops); ++ kfree(hook1); ++ } ++ ++ nf_flow_table_cleanup(dev); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block flow_offload_netdev_notifier = { ++ .notifier_call = flow_offload_netdev_event, ++}; ++ ++static unsigned int ++nf_flow_offload_inet_hook(void *priv, struct sk_buff *skb, ++ const struct nf_hook_state *state) ++{ ++ switch (skb->protocol) { ++ case htons(ETH_P_IP): ++ return nf_flow_offload_ip_hook(priv, skb, state); ++ case htons(ETH_P_IPV6): ++ return nf_flow_offload_ipv6_hook(priv, skb, state); ++ } ++ ++ return NF_ACCEPT; ++} ++ ++static int nf_flow_rule_route_inet(struct net *net, ++ const struct flow_offload *flow, ++ enum flow_offload_tuple_dir dir, ++ struct nf_flow_rule *flow_rule) ++{ ++ const struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple; ++ int err; ++ ++ switch (flow_tuple->l3proto) { ++ case NFPROTO_IPV4: ++ err = nf_flow_rule_route_ipv4(net, flow, dir, flow_rule); ++ break; ++ case NFPROTO_IPV6: ++ err = nf_flow_rule_route_ipv6(net, flow, dir, flow_rule); ++ break; ++ default: ++ err = -1; ++ break; ++ } ++ ++ return err; ++} ++ ++static struct nf_flowtable_type flowtable_inet = { ++ .family = NFPROTO_INET, ++ .init = nf_flow_table_init, ++ .setup = nf_flow_table_offload_setup, ++ .action = nf_flow_rule_route_inet, ++ .free = nf_flow_table_free, ++ .hook = nf_flow_offload_inet_hook, ++ .owner = THIS_MODULE, ++}; ++ ++static int init_flowtable(struct xt_flowoffload_table *tbl) ++{ ++ INIT_DELAYED_WORK(&tbl->work, xt_flowoffload_hook_work); ++ tbl->ft.type = &flowtable_inet; ++ ++ return nf_flow_table_init(&tbl->ft); ++} ++ ++static int __init xt_flowoffload_tg_init(void) ++{ ++ int ret; ++ ++ register_netdevice_notifier(&flow_offload_netdev_notifier); ++ ++ ret = init_flowtable(&flowtable[0]); ++ if (ret) ++ return ret; ++ ++ ret = init_flowtable(&flowtable[1]); ++ if (ret) ++ goto cleanup; ++ ++ flowtable[1].ft.flags = NF_FLOWTABLE_HW_OFFLOAD; ++ ++ ret = xt_register_target(&offload_tg_reg); ++ if (ret) ++ goto cleanup2; ++ ++ return 0; ++ ++cleanup2: ++ nf_flow_table_free(&flowtable[1].ft); ++cleanup: ++ nf_flow_table_free(&flowtable[0].ft); ++ return ret; ++} ++ ++static void __exit xt_flowoffload_tg_exit(void) ++{ ++ xt_unregister_target(&offload_tg_reg); ++ unregister_netdevice_notifier(&flow_offload_netdev_notifier); ++ nf_flow_table_free(&flowtable[0].ft); ++ nf_flow_table_free(&flowtable[1].ft); ++} ++ ++MODULE_LICENSE("GPL"); ++module_init(xt_flowoffload_tg_init); ++module_exit(xt_flowoffload_tg_exit); +--- a/net/netfilter/nf_flow_table_core.c ++++ b/net/netfilter/nf_flow_table_core.c +@@ -7,7 +7,6 @@ + #include + #include + #include +-#include + #include + #include + #include +@@ -395,8 +394,7 @@ flow_offload_lookup(struct nf_flowtable + } + EXPORT_SYMBOL_GPL(flow_offload_lookup); + +-static int +-nf_flow_table_iterate(struct nf_flowtable *flow_table, ++int nf_flow_table_iterate(struct nf_flowtable *flow_table, + void (*iter)(struct flow_offload *flow, void *data), + void *data) + { +@@ -428,6 +426,7 @@ nf_flow_table_iterate(struct nf_flowtabl + + return err; + } ++EXPORT_SYMBOL_GPL(nf_flow_table_iterate); + + static bool flow_offload_stale_dst(struct flow_offload_tuple *tuple) + { +--- /dev/null ++++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h +@@ -0,0 +1,17 @@ ++/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ ++#ifndef _XT_FLOWOFFLOAD_H ++#define _XT_FLOWOFFLOAD_H ++ ++#include ++ ++enum { ++ XT_FLOWOFFLOAD_HW = 1 << 0, ++ ++ XT_FLOWOFFLOAD_MASK = XT_FLOWOFFLOAD_HW ++}; ++ ++struct xt_flowoffload_target_info { ++ __u32 flags; ++}; ++ ++#endif /* _XT_FLOWOFFLOAD_H */ +--- a/include/net/netfilter/nf_flow_table.h ++++ b/include/net/netfilter/nf_flow_table.h +@@ -270,6 +270,10 @@ void nf_flow_table_free(struct nf_flowta + + void flow_offload_teardown(struct flow_offload *flow); + ++int nf_flow_table_iterate(struct nf_flowtable *flow_table, ++ void (*iter)(struct flow_offload *flow, void *data), ++ void *data); ++ + void nf_flow_snat_port(const struct flow_offload *flow, + struct sk_buff *skb, unsigned int thoff, + u8 protocol, enum flow_offload_tuple_dir dir); diff --git a/target/linux/generic/hack-5.15/651-wireless_mesh_header.patch b/target/linux/generic/hack-5.15/651-wireless_mesh_header.patch new file mode 100644 index 0000000000..0639ad4e48 --- /dev/null +++ b/target/linux/generic/hack-5.15/651-wireless_mesh_header.patch @@ -0,0 +1,24 @@ +From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001 +From: Imre Kaloz +Date: Fri, 7 Jul 2017 17:21:05 +0200 +Subject: mac80211: increase wireless mesh header size + +lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1 +Signed-off-by: Imre Kaloz +--- + include/linux/netdevice.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -144,8 +144,8 @@ static inline bool dev_xmit_complete(int + + #if defined(CONFIG_HYPERV_NET) + # define LL_MAX_HEADER 128 +-#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) +-# if defined(CONFIG_MAC80211_MESH) ++#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1 ++# if defined(CONFIG_MAC80211_MESH) || 1 + # define LL_MAX_HEADER 128 + # else + # define LL_MAX_HEADER 96 diff --git a/target/linux/generic/hack-5.15/660-fq_codel_defaults.patch b/target/linux/generic/hack-5.15/660-fq_codel_defaults.patch new file mode 100644 index 0000000000..5541c0bc89 --- /dev/null +++ b/target/linux/generic/hack-5.15/660-fq_codel_defaults.patch @@ -0,0 +1,27 @@ +From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:21:53 +0200 +Subject: hack: net: fq_codel: tune defaults for small devices + +Assume that x86_64 devices always have a big memory and do not need this +optimization compared to devices with only 32 MB or 64 MB RAM. + +Signed-off-by: Felix Fietkau +--- + net/sched/sch_fq_codel.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/net/sched/sch_fq_codel.c ++++ b/net/sched/sch_fq_codel.c +@@ -469,7 +469,11 @@ static int fq_codel_init(struct Qdisc *s + + sch->limit = 10*1024; + q->flows_cnt = 1024; ++#ifdef CONFIG_X86_64 + q->memory_limit = 32 << 20; /* 32 MBytes */ ++#else ++ q->memory_limit = 4 << 20; /* 4 MBytes */ ++#endif + q->drop_batch_size = 64; + q->quantum = psched_mtu(qdisc_dev(sch)); + INIT_LIST_HEAD(&q->new_flows); diff --git a/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch new file mode 100644 index 0000000000..b90e1fc441 --- /dev/null +++ b/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch @@ -0,0 +1,129 @@ +From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:24:23 +0200 +Subject: net: swconfig: adds openwrt switch layer + +Signed-off-by: Felix Fietkau +--- + drivers/net/phy/Kconfig | 83 +++++++++++++++++++++++++++++++++++++++++++++++ + drivers/net/phy/Makefile | 15 +++++++++ + include/uapi/linux/Kbuild | 1 + + 3 files changed, 99 insertions(+) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -61,6 +61,80 @@ config SFP + depends on HWMON || HWMON=n + select MDIO_I2C + ++comment "Switch configuration API + drivers" ++ ++config SWCONFIG ++ tristate "Switch configuration API" ++ help ++ Switch configuration API using netlink. This allows ++ you to configure the VLAN features of certain switches. ++ ++config SWCONFIG_LEDS ++ bool "Switch LED trigger support" ++ depends on (SWCONFIG && LEDS_TRIGGERS) ++ ++config ADM6996_PHY ++ tristate "Driver for ADM6996 switches" ++ select SWCONFIG ++ help ++ Currently supports the ADM6996FC and ADM6996M switches. ++ Support for FC is very limited. ++ ++config AR8216_PHY ++ tristate "Driver for Atheros AR8216 switches" ++ select SWCONFIG ++ select ETHERNET_PACKET_MANGLE ++ ++config AR8216_PHY_LEDS ++ bool "Atheros AR8216 switch LED support" ++ depends on (AR8216_PHY && LEDS_CLASS) ++ ++source "drivers/net/phy/b53/Kconfig" ++ ++config IP17XX_PHY ++ tristate "Driver for IC+ IP17xx switches" ++ select SWCONFIG ++ ++config PSB6970_PHY ++ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch" ++ select SWCONFIG ++ ++config RTL8306_PHY ++ tristate "Driver for Realtek RTL8306S switches" ++ select SWCONFIG ++ ++config RTL8366_SMI ++ tristate "Driver for the RTL8366 SMI interface" ++ depends on GPIOLIB ++ help ++ This module implements the SMI interface protocol which is used ++ by some RTL8366 ethernet switch devices via the generic GPIO API. ++ ++if RTL8366_SMI ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366 SMI interface debugfs support" ++ depends on DEBUG_FS ++ default n ++ ++config RTL8366S_PHY ++ tristate "Driver for the Realtek RTL8366S switch" ++ select SWCONFIG ++ ++config RTL8366RB_PHY ++ tristate "Driver for the Realtek RTL8366RB switch" ++ select SWCONFIG ++ ++config RTL8367_PHY ++ tristate "Driver for the Realtek RTL8367R/M switches" ++ select SWCONFIG ++ ++config RTL8367B_PHY ++ tristate "Driver fot the Realtek RTL8367R-VB switch" ++ select SWCONFIG ++ ++endif # RTL8366_SMI ++ + comment "MII PHY device drivers" + + config AMD_PHY +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -24,6 +24,19 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_ + obj-$(CONFIG_PHYLINK) += phylink.o + obj-$(CONFIG_PHYLIB) += libphy.o + ++obj-$(CONFIG_SWCONFIG) += swconfig.o ++obj-$(CONFIG_ADM6996_PHY) += adm6996.o ++obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o ++obj-$(CONFIG_SWCONFIG_B53) += b53/ ++obj-$(CONFIG_IP17XX_PHY) += ip17xx.o ++obj-$(CONFIG_PSB6970_PHY) += psb6970.o ++obj-$(CONFIG_RTL8306_PHY) += rtl8306.o ++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o ++obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o ++obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o ++obj-$(CONFIG_RTL8367_PHY) += rtl8367.o ++obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o ++ + obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o + + obj-$(CONFIG_SFP) += sfp.o +--- a/include/linux/platform_data/b53.h ++++ b/include/linux/platform_data/b53.h +@@ -29,6 +29,9 @@ struct b53_platform_data { + u32 chip_id; + u16 enabled_ports; + ++ /* allow to specify an ethX alias */ ++ const char *alias; ++ + /* only used by MMAP'd driver */ + unsigned big_endian:1; + void __iomem *regs; diff --git a/target/linux/generic/hack-5.15/710-net-dsa-mv88e6xxx-default-VID-1.patch b/target/linux/generic/hack-5.15/710-net-dsa-mv88e6xxx-default-VID-1.patch new file mode 100644 index 0000000000..03725653f9 --- /dev/null +++ b/target/linux/generic/hack-5.15/710-net-dsa-mv88e6xxx-default-VID-1.patch @@ -0,0 +1,18 @@ +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -2097,6 +2097,7 @@ static int mv88e6xxx_port_fdb_add(struct + struct mv88e6xxx_chip *chip = ds->priv; + int err; + ++ vid = vid ? : 1; + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, + MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC); +@@ -2111,6 +2112,7 @@ static int mv88e6xxx_port_fdb_del(struct + struct mv88e6xxx_chip *chip = ds->priv; + int err; + ++ vid = vid ? : 1; + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, 0); + mv88e6xxx_reg_unlock(chip); diff --git a/target/linux/generic/hack-5.15/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch b/target/linux/generic/hack-5.15/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch new file mode 100644 index 0000000000..68cac73935 --- /dev/null +++ b/target/linux/generic/hack-5.15/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch @@ -0,0 +1,12 @@ +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -2659,6 +2659,9 @@ static int mv88e6xxx_setup_port(struct m + if (dsa_is_cpu_port(ds, port)) + reg = 0; + ++ /* Disable ATU member violation interrupt */ ++ reg |= MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG; ++ + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR, + reg); + if (err) diff --git a/target/linux/generic/hack-5.15/720-net-phy-add-aqr-phys.patch b/target/linux/generic/hack-5.15/720-net-phy-add-aqr-phys.patch new file mode 100644 index 0000000000..4d4420aa2f --- /dev/null +++ b/target/linux/generic/hack-5.15/720-net-phy-add-aqr-phys.patch @@ -0,0 +1,142 @@ +From: Birger Koblitz +Date: Sun, 5 Sep 2021 15:13:10 +0200 +Subject: [PATCH] kernel: Add AQR113C and AQR813 support + +This hack adds support for the Aquantia 4th generation, 10GBit +PHYs AQR113C and AQR813. + +Signed-off-by: Birger Koblitz + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -20,8 +20,10 @@ + #define PHY_ID_AQR105 0x03a1b4a2 + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 ++#define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 + #define PHY_ID_AQR405 0x03a1b4b0 ++#define PHY_ID_AQR813 0x31c31cb2 + + #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 + #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3) +@@ -330,6 +332,49 @@ static int aqr107_read_rate(struct phy_d + return 0; + } + ++static int aqr113c_read_status(struct phy_device *phydev) ++{ ++ int val, ret; ++ ++ ret = aqr_read_status(phydev); ++ if (ret) ++ return ret; ++ ++ if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE) ++ return 0; ++ ++ // On AQR113C, the speed returned by aqr_read_status is wrong ++ aqr107_read_rate(phydev); ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS); ++ if (val < 0) ++ return val; ++ ++ switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) { ++ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR: ++ phydev->interface = PHY_INTERFACE_MODE_10GKR; ++ break; ++ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI: ++ phydev->interface = PHY_INTERFACE_MODE_10GBASER; ++ break; ++ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII: ++ phydev->interface = PHY_INTERFACE_MODE_USXGMII; ++ break; ++ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII: ++ phydev->interface = PHY_INTERFACE_MODE_SGMII; ++ break; ++ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII: ++ phydev->interface = PHY_INTERFACE_MODE_2500BASEX; ++ break; ++ default: ++ phydev->interface = PHY_INTERFACE_MODE_NA; ++ break; ++ } ++ ++ /* Read downshifted rate from vendor register */ ++ return aqr107_read_rate(phydev); ++} ++ + static int aqr107_read_status(struct phy_device *phydev) + { + int val, ret; +@@ -460,7 +505,7 @@ static void aqr107_chip_info(struct phy_ + build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val); + prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val); + +- phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n", ++ phydev_info(phydev, "FW %u.%u, Build %u, Provisioning %u\n", + fw_major, fw_minor, build_id, prov_id); + } + +@@ -632,6 +677,24 @@ static struct phy_driver aqr_driver[] = + .link_change_notify = aqr107_link_change_notify, + }, + { ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C), ++ .name = "Aquantia AQR113C", ++ .probe = aqr107_probe, ++ .config_init = aqr107_config_init, ++ .config_aneg = aqr_config_aneg, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr113c_read_status, ++ .get_tunable = aqr107_get_tunable, ++ .set_tunable = aqr107_set_tunable, ++ .suspend = aqr107_suspend, ++ .resume = aqr107_resume, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++ .link_change_notify = aqr107_link_change_notify, ++}, ++{ + PHY_ID_MATCH_MODEL(PHY_ID_AQCS109), + .name = "Aquantia AQCS109", + .probe = aqr107_probe, +@@ -657,6 +720,24 @@ static struct phy_driver aqr_driver[] = + .ack_interrupt = aqr_ack_interrupt, + .read_status = aqr_read_status, + }, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR813), ++ .name = "Aquantia AQR813", ++ .probe = aqr107_probe, ++ .config_init = aqr107_config_init, ++ .config_aneg = aqr_config_aneg, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr113c_read_status, ++ .get_tunable = aqr107_get_tunable, ++ .set_tunable = aqr107_set_tunable, ++ .suspend = aqr107_suspend, ++ .resume = aqr107_resume, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++ .link_change_notify = aqr107_link_change_notify, ++}, + }; + + module_phy_driver(aqr_driver); +@@ -667,8 +748,10 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, + { } + }; + diff --git a/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch b/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch new file mode 100644 index 0000000000..67808c35f8 --- /dev/null +++ b/target/linux/generic/hack-5.15/721-net-add-packet-mangeling.patch @@ -0,0 +1,167 @@ +From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Fri, 7 Jul 2017 17:25:00 +0200 +Subject: net: add packet mangeling + +ar8216 switches have a hardware bug, which renders normal 802.1q support +unusable. Packet mangling is required to fix up the vlan for incoming +packets. + +Signed-off-by: Felix Fietkau +--- + include/linux/netdevice.h | 11 +++++++++++ + include/linux/skbuff.h | 14 ++++---------- + net/Kconfig | 6 ++++++ + net/core/dev.c | 20 +++++++++++++++----- + net/core/skbuff.c | 17 +++++++++++++++++ + net/ethernet/eth.c | 6 ++++++ + 6 files changed, 59 insertions(+), 15 deletions(-) + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -1618,6 +1618,7 @@ enum netdev_priv_flags { + IFF_FAILOVER_SLAVE = 1<<28, + IFF_L3MDEV_RX_HANDLER = 1<<29, + IFF_LIVE_RENAME_OK = 1<<30, ++ IFF_NO_IP_ALIGN = 1<<31, + }; + + #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN +@@ -1650,6 +1651,7 @@ enum netdev_priv_flags { + #define IFF_FAILOVER_SLAVE IFF_FAILOVER_SLAVE + #define IFF_L3MDEV_RX_HANDLER IFF_L3MDEV_RX_HANDLER + #define IFF_LIVE_RENAME_OK IFF_LIVE_RENAME_OK ++#define IFF_NO_IP_ALIGN IFF_NO_IP_ALIGN + + /* Specifies the type of the struct net_device::ml_priv pointer */ + enum netdev_ml_priv_type { +@@ -1990,6 +1992,11 @@ struct net_device { + const struct tlsdev_ops *tlsdev_ops; + #endif + ++#ifdef CONFIG_ETHERNET_PACKET_MANGLE ++ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb); ++ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb); ++#endif ++ + const struct header_ops *header_ops; + + unsigned int flags; +@@ -2080,6 +2087,10 @@ struct net_device { + struct mpls_dev __rcu *mpls_ptr; + #endif + ++#ifdef CONFIG_ETHERNET_PACKET_MANGLE ++ void *phy_ptr; /* PHY device specific data */ ++#endif ++ + /* + * Cache lines mostly used on receive path (including eth_type_trans()) + */ +--- a/include/linux/skbuff.h ++++ b/include/linux/skbuff.h +@@ -2710,6 +2710,10 @@ static inline int pskb_trim(struct sk_bu + return (len < skb->len) ? __pskb_trim(skb, len) : 0; + } + ++extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, ++ unsigned int length, gfp_t gfp); ++ ++ + /** + * pskb_trim_unique - remove end from a paged unique (not cloned) buffer + * @skb: buffer to alter +@@ -2841,16 +2845,6 @@ static inline struct sk_buff *dev_alloc_ + } + + +-static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, +- unsigned int length, gfp_t gfp) +-{ +- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); +- +- if (NET_IP_ALIGN && skb) +- skb_reserve(skb, NET_IP_ALIGN); +- return skb; +-} +- + static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, + unsigned int length) + { +--- a/net/Kconfig ++++ b/net/Kconfig +@@ -26,6 +26,12 @@ menuconfig NET + + if NET + ++config ETHERNET_PACKET_MANGLE ++ bool ++ help ++ This option can be selected by phy drivers that need to mangle ++ packets going in or out of an ethernet device. ++ + config WANT_COMPAT_NETLINK_MESSAGES + bool + help +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -3646,6 +3646,11 @@ static int xmit_one(struct sk_buff *skb, + if (dev_nit_active(dev)) + dev_queue_xmit_nit(skb, dev); + ++#ifdef CONFIG_ETHERNET_PACKET_MANGLE ++ if (dev->eth_mangle_tx && !(skb = dev->eth_mangle_tx(dev, skb))) ++ return NETDEV_TX_OK; ++#endif ++ + len = skb->len; + PRANDOM_ADD_NOISE(skb, dev, txq, len + jiffies); + trace_net_dev_start_xmit(skb, dev); +--- a/net/core/skbuff.c ++++ b/net/core/skbuff.c +@@ -60,6 +60,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -553,6 +554,22 @@ skb_fail: + } + EXPORT_SYMBOL(__napi_alloc_skb); + ++struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev, ++ unsigned int length, gfp_t gfp) ++{ ++ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp); ++ ++#ifdef CONFIG_ETHERNET_PACKET_MANGLE ++ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN)) ++ return skb; ++#endif ++ ++ if (NET_IP_ALIGN && skb) ++ skb_reserve(skb, NET_IP_ALIGN); ++ return skb; ++} ++EXPORT_SYMBOL(__netdev_alloc_skb_ip_align); ++ + void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off, + int size, unsigned int truesize) + { +--- a/net/ethernet/eth.c ++++ b/net/ethernet/eth.c +@@ -171,6 +171,12 @@ __be16 eth_type_trans(struct sk_buff *sk + const struct ethhdr *eth; + + skb->dev = dev; ++ ++#ifdef CONFIG_ETHERNET_PACKET_MANGLE ++ if (dev->eth_mangle_rx) ++ dev->eth_mangle_rx(dev, skb); ++#endif ++ + skb_reset_mac_header(skb); + + eth = (struct ethhdr *)skb->data; diff --git a/target/linux/generic/hack-5.15/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-5.15/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch new file mode 100644 index 0000000000..e3541400d7 --- /dev/null +++ b/target/linux/generic/hack-5.15/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch @@ -0,0 +1,154 @@ +From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001 +From: Alex Marginean +Date: Tue, 27 Aug 2019 15:16:56 +0300 +Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412 + +Adds support for AQR112 and AQR412 which is mostly based on existing code +with the addition of code configuring the protocol on system side. +This allows changing the system side protocol without having to deploy a +different firmware on the PHY. + +Signed-off-by: Alex Marginean +--- + drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 88 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -20,9 +20,11 @@ + #define PHY_ID_AQR105 0x03a1b4a2 + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 ++#define PHY_ID_AQR112 0x03a1b662 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 + #define PHY_ID_AQR405 0x03a1b4b0 ++#define PHY_ID_AQR412 0x03a1b712 + #define PHY_ID_AQR813 0x31c31cb2 + + #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 +@@ -123,6 +125,29 @@ + #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1) + #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0) + ++/* registers in MDIO_MMD_VEND1 region */ ++#define AQUANTIA_VND1_GLOBAL_SC 0x000 ++#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb) ++ ++/* global start rate, the protocol associated with this speed is used by default ++ * on SI. ++ */ ++#define AQUANTIA_VND1_GSTART_RATE 0x31a ++#define AQUANTIA_VND1_GSTART_RATE_OFF 0 ++#define AQUANTIA_VND1_GSTART_RATE_100M 1 ++#define AQUANTIA_VND1_GSTART_RATE_1G 2 ++#define AQUANTIA_VND1_GSTART_RATE_10G 3 ++#define AQUANTIA_VND1_GSTART_RATE_2_5G 4 ++#define AQUANTIA_VND1_GSTART_RATE_5G 5 ++ ++/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */ ++#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b ++#define AQUANTIA_VND1_GSYSCFG_100M 0 ++#define AQUANTIA_VND1_GSYSCFG_1G 1 ++#define AQUANTIA_VND1_GSYSCFG_2_5G 2 ++#define AQUANTIA_VND1_GSYSCFG_5G 3 ++#define AQUANTIA_VND1_GSYSCFG_10G 4 ++ + struct aqr107_hw_stat { + const char *name; + int reg; +@@ -243,6 +268,51 @@ static int aqr_config_aneg(struct phy_de + return genphy_c45_check_and_restart_aneg(phydev, changed); + } + ++static struct { ++ u16 syscfg; ++ int cnt; ++ u16 start_rate; ++} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = { ++ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G, ++ AQUANTIA_VND1_GSTART_RATE_1G}, ++ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, ++ AQUANTIA_VND1_GSTART_RATE_2_5G}, ++ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, ++ AQUANTIA_VND1_GSTART_RATE_10G}, ++ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, ++ AQUANTIA_VND1_GSTART_RATE_10G}, ++}; ++ ++/* Sets up protocol on system side before calling aqr_config_aneg */ ++static int aqr_config_aneg_set_prot(struct phy_device *phydev) ++{ ++ int if_type = phydev->interface; ++ int i; ++ ++ if (!aquantia_syscfg[if_type].cnt) ++ return 0; ++ ++ /* set PHY in low power mode so we can configure protocols */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, ++ AQUANTIA_VND1_GLOBAL_SC_LP); ++ mdelay(10); ++ ++ /* set the default rate to enable the SI link */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, ++ aquantia_syscfg[if_type].start_rate); ++ ++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, ++ AQUANTIA_VND1_GSYSCFG_BASE + i, ++ aquantia_syscfg[if_type].syscfg); ++ ++ /* wake PHY back up */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); ++ mdelay(10); ++ ++ return aqr_config_aneg(phydev); ++} ++ + static int aqr_config_intr(struct phy_device *phydev) + { + bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED; +@@ -738,6 +808,30 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, + }, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112), ++ .name = "Aquantia AQR112", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR412), ++ .name = "Aquantia AQR412", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, + }; + + module_phy_driver(aqr_driver); +@@ -748,9 +842,11 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, + { } + }; diff --git a/target/linux/generic/hack-5.15/723-net-phy-aquantia-fix-system-side-protocol-mi.patch b/target/linux/generic/hack-5.15/723-net-phy-aquantia-fix-system-side-protocol-mi.patch new file mode 100644 index 0000000000..9c5df905bb --- /dev/null +++ b/target/linux/generic/hack-5.15/723-net-phy-aquantia-fix-system-side-protocol-mi.patch @@ -0,0 +1,34 @@ +From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001 +From: Alex Marginean +Date: Fri, 20 Sep 2019 18:22:52 +0300 +Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol + misconfiguration + +Do not set up protocols for speeds that are not supported by FW. Enabling +these protocols leads to link issues on system side. + +Signed-off-by: Alex Marginean +--- + drivers/net/phy/aquantia_main.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -301,10 +301,16 @@ static int aqr_config_aneg_set_prot(stru + phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, + aquantia_syscfg[if_type].start_rate); + +- for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) ++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) { ++ u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ++ AQUANTIA_VND1_GSYSCFG_BASE + i); ++ if (!reg) ++ continue; ++ + phy_write_mmd(phydev, MDIO_MMD_VEND1, + AQUANTIA_VND1_GSYSCFG_BASE + i, + aquantia_syscfg[if_type].syscfg); ++ } + + /* wake PHY back up */ + phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); diff --git a/target/linux/generic/hack-5.15/724-net-phy-aquantia-Add-AQR113-driver-support.patch b/target/linux/generic/hack-5.15/724-net-phy-aquantia-Add-AQR113-driver-support.patch new file mode 100644 index 0000000000..7a661309f9 --- /dev/null +++ b/target/linux/generic/hack-5.15/724-net-phy-aquantia-Add-AQR113-driver-support.patch @@ -0,0 +1,43 @@ +From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001 +From: "Langer, Thomas" +Date: Fri, 9 Jul 2021 17:36:46 +0200 +Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support + +Add a new entry for AQR113 PHY_ID +--- + drivers/net/phy/aquantia_main.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -21,6 +21,7 @@ + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 + #define PHY_ID_AQR112 0x03a1b662 ++#define PHY_ID_AQR113 0x31c31c40 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 + #define PHY_ID_AQR405 0x03a1b4b0 +@@ -827,6 +828,14 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + }, + { ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR113), ++ .name = "Aquantia AQR113", ++ .config_aneg = aqr_config_aneg, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++}, ++{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR412), + .name = "Aquantia AQR412", + .probe = aqr107_probe, +@@ -849,6 +858,7 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, diff --git a/target/linux/generic/hack-5.15/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-5.15/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch new file mode 100644 index 0000000000..40ad0ff583 --- /dev/null +++ b/target/linux/generic/hack-5.15/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch @@ -0,0 +1,63 @@ +From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 23 Dec 2021 14:52:56 +0000 +Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R + +As advised by Ian Chang this PHY is used in Puzzle devices. + +Signed-off-by: Daniel Golle +--- + drivers/net/phy/aquantia_main.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -21,6 +21,8 @@ + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 + #define PHY_ID_AQR112 0x03a1b662 ++#define PHY_ID_AQR112C 0x03a1b790 ++#define PHY_ID_AQR112R 0x31c31d12 + #define PHY_ID_AQR113 0x31c31c40 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 +@@ -828,6 +830,30 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + }, + { ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C), ++ .name = "Aquantia AQR112C", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R), ++ .name = "Aquantia AQR112R", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR113), + .name = "Aquantia AQR113", + .config_aneg = aqr_config_aneg, +@@ -858,6 +884,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, diff --git a/target/linux/generic/hack-5.15/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.15/760-net-usb-r8152-add-LED-configuration-from-OF.patch new file mode 100644 index 0000000000..f94d16c0ff --- /dev/null +++ b/target/linux/generic/hack-5.15/760-net-usb-r8152-add-LED-configuration-from-OF.patch @@ -0,0 +1,74 @@ +From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 02:38:31 +0200 +Subject: [PATCH] net: usb: r8152: add LED configuration from OF + +This adds the ability to configure the LED configuration register using +OF. This way, the correct value for board specific LED configuration can +be determined. + +Signed-off-by: David Bauer +--- + drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152 + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); + } + ++static int r8152_led_configuration(struct r8152 *tp) ++{ ++ u32 led_data; ++ int ret; ++ ++ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", ++ &led_data); ++ ++ if (ret) ++ return ret; ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); ++ ++ return 0; ++} ++ + static void r8152b_init(struct r8152 *tp) + { + u32 ocp_data; +@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ r8152_led_configuration(tp); + } + + static void r8153_init(struct r8152 *tp) +@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp) + tp->coalesce = COALESCE_SLOW; + break; + } ++ ++ r8152_led_configuration(tp); + } + + static void r8153b_init(struct r8152 *tp) +@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ ++ ++ r8152_led_configuration(tp); + } + + static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/generic/hack-5.15/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.15/761-dt-bindings-net-add-RTL8152-binding-documentation.patch new file mode 100644 index 0000000000..be262b993c --- /dev/null +++ b/target/linux/generic/hack-5.15/761-dt-bindings-net-add-RTL8152-binding-documentation.patch @@ -0,0 +1,54 @@ +From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 15:30:33 +0200 +Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation + +Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet +adapters. + +Signed-off-by: David Bauer +--- + .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml +@@ -0,0 +1,36 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Realtek RTL8152/RTL8153 series USB ethernet ++ ++maintainers: ++ - David Bauer ++ ++properties: ++ compatible: ++ oneOf: ++ - items: ++ - enum: ++ - realtek,rtl8152 ++ - realtek,rtl8153 ++ ++ reg: ++ description: The device number on the USB bus ++ ++ realtek,led-data: ++ description: Value to be written to the LED configuration register. ++ ++required: ++ - compatible ++ - reg ++ ++examples: ++ - | ++ usb-eth@2 { ++ compatible = "realtek,rtl8153"; ++ reg = <2>; ++ realtek,led-data = <0x87>; ++ }; +\ No newline at end of file diff --git a/target/linux/generic/hack-5.15/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-5.15/773-bgmac-add-srab-switch.patch new file mode 100644 index 0000000000..bc377bdd82 --- /dev/null +++ b/target/linux/generic/hack-5.15/773-bgmac-add-srab-switch.patch @@ -0,0 +1,98 @@ +From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Fri, 7 Jul 2017 17:26:01 +0200 +Subject: bcm53xx: bgmac: use srab switch driver + +use the srab switch driver on these SoCs. + +Signed-off-by: Hauke Mehrtens +--- + drivers/net/ethernet/broadcom/bgmac-bcma.c | 1 + + drivers/net/ethernet/broadcom/bgmac.c | 24 ++++++++++++++++++++++++ + drivers/net/ethernet/broadcom/bgmac.h | 4 ++++ + 3 files changed, 29 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c ++++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c +@@ -280,6 +280,7 @@ static int bgmac_probe(struct bcma_devic + bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; + bgmac->feature_flags |= BGMAC_FEAT_NO_RESET; + bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500; ++ bgmac->feature_flags |= BGMAC_FEAT_SRAB; + break; + default: + bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST; +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -1408,6 +1409,17 @@ static const struct ethtool_ops bgmac_et + .set_link_ksettings = phy_ethtool_set_link_ksettings, + }; + ++static struct b53_platform_data bgmac_b53_pdata = { ++}; ++ ++static struct platform_device bgmac_b53_dev = { ++ .name = "b53-srab-switch", ++ .id = -1, ++ .dev = { ++ .platform_data = &bgmac_b53_pdata, ++ }, ++}; ++ + /************************************************** + * MII + **************************************************/ +@@ -1542,6 +1554,14 @@ int bgmac_enet_probe(struct bgmac *bgmac + /* Omit FCS from max MTU size */ + net_dev->max_mtu = BGMAC_RX_MAX_FRAME_SIZE - ETH_FCS_LEN; + ++ if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) { ++ bgmac_b53_pdata.regs = ioremap(0x18007000, 0x1000); ++ ++ err = platform_device_register(&bgmac_b53_dev); ++ if (!err) ++ bgmac->b53_device = &bgmac_b53_dev; ++ } ++ + err = register_netdev(bgmac->net_dev); + if (err) { + dev_err(bgmac->dev, "Cannot register net device\n"); +@@ -1564,6 +1584,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe); + + void bgmac_enet_remove(struct bgmac *bgmac) + { ++ if (bgmac->b53_device) ++ platform_device_unregister(&bgmac_b53_dev); ++ bgmac->b53_device = NULL; ++ + unregister_netdev(bgmac->net_dev); + phy_disconnect(bgmac->net_dev->phydev); + netif_napi_del(&bgmac->napi); +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -428,6 +428,7 @@ + #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18) + #define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19) + #define BGMAC_FEAT_IDM_MASK BIT(20) ++#define BGMAC_FEAT_SRAB BIT(21) + + struct bgmac_slot_info { + union { +@@ -533,6 +534,9 @@ struct bgmac { + void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask, + u32 set); + int (*phy_connect)(struct bgmac *bgmac); ++ ++ /* platform device for associated switch */ ++ struct platform_device *b53_device; + }; + + struct bgmac *bgmac_alloc(struct device *dev); diff --git a/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch new file mode 100644 index 0000000000..cb6f46760b --- /dev/null +++ b/target/linux/generic/hack-5.15/780-usb-net-MeigLink_modem_support.patch @@ -0,0 +1,33 @@ +--- a/drivers/net/usb/qmi_wwan.c ++++ b/drivers/net/usb/qmi_wwan.c +@@ -1024,6 +1024,7 @@ static const struct usb_device_id produc + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ ++ {QMI_MATCH_FF_FF_FF(0x05c6, 0xf601)}, /* MeigLink SLM750 */ + + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -243,6 +243,8 @@ static void option_instat_callback(struc + #define UBLOX_PRODUCT_R6XX 0x90fa + /* These Yuga products use Qualcomm's vendor ID */ + #define YUGA_PRODUCT_CLM920_NC5 0x9625 ++/* These MeigLink products use Qualcomm's vendor ID */ ++#define MEIGLINK_PRODUCT_SLM750 0xf601 + + #define QUECTEL_VENDOR_ID 0x2c7c + /* These Quectel products use Quectel's vendor ID */ +@@ -1127,6 +1129,11 @@ static const struct usb_device_id option + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), + .driver_info = RSVD(4) }, ++ /* Meiglink products using Qualcomm vendor ID */ ++ // Works OK. In case of some issues check macros that are used by Quectel Products ++ { USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0xff, 0xff), ++ .driver_info = NUMEP2 }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, diff --git a/target/linux/generic/hack-5.15/800-GPIO-add-named-gpio-exports.patch b/target/linux/generic/hack-5.15/800-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..76f89acdcd --- /dev/null +++ b/target/linux/generic/hack-5.15/800-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,162 @@ +From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 30/36] GPIO: add named gpio exports + +Signed-off-by: John Crispin +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -19,6 +19,8 @@ + #include + #include + #include ++#include ++#include + + #include "gpiolib.h" + #include "gpiolib-of.h" +@@ -1039,3 +1041,72 @@ void of_gpiochip_remove(struct gpio_chip + { + of_node_put(chip->of_node); + } ++ ++#ifdef CONFIG_GPIO_SYSFS ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ if (!gpio_is_valid(gpio)) ++ return gpio; ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++ .probe = of_gpio_export_probe, ++}; ++ ++module_platform_driver(gpio_export_driver); ++ ++#endif +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -715,6 +715,7 @@ static inline void devm_acpi_dev_remove_ + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -722,6 +723,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -572,7 +572,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -634,6 +634,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -655,6 +657,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) diff --git a/target/linux/generic/hack-5.15/901-debloat_sock_diag.patch b/target/linux/generic/hack-5.15/901-debloat_sock_diag.patch new file mode 100644 index 0000000000..247b50d536 --- /dev/null +++ b/target/linux/generic/hack-5.15/901-debloat_sock_diag.patch @@ -0,0 +1,162 @@ +From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 8 Jul 2017 08:16:31 +0200 +Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS + +Signed-off-by: Felix Fietkau +--- + net/Kconfig | 3 +++ + net/core/Makefile | 3 ++- + net/core/sock.c | 2 ++ + net/ipv4/Kconfig | 1 + + net/netlink/Kconfig | 1 + + net/packet/Kconfig | 1 + + net/unix/Kconfig | 1 + + 7 files changed, 11 insertions(+), 1 deletion(-) + +--- a/net/Kconfig ++++ b/net/Kconfig +@@ -104,6 +104,9 @@ source "net/mptcp/Kconfig" + + endif # if INET + ++config SOCK_DIAG ++ bool ++ + config NETWORK_SECMARK + bool "Security Marking" + help +--- a/net/core/Makefile ++++ b/net/core/Makefile +@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core. + + obj-y += dev.o dev_addr_lists.o dst.o netevent.o \ + neighbour.o rtnetlink.o utils.o link_watch.o filter.o \ +- sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \ ++ dev_ioctl.o tso.o sock_reuseport.o \ + fib_notifier.o xdp.o flow_offload.o + ++obj-$(CONFIG_SOCK_DIAG) += sock_diag.o + obj-y += net-sysfs.o + obj-$(CONFIG_PAGE_POOL) += page_pool.o + obj-$(CONFIG_PROC_FS) += net-procfs.o +--- a/net/core/sock.c ++++ b/net/core/sock.c +@@ -114,6 +114,7 @@ + #include + #include + #include ++#include + + #include + +@@ -141,6 +142,7 @@ + + static DEFINE_MUTEX(proto_list_mutex); + static LIST_HEAD(proto_list); ++DEFINE_COOKIE(sock_cookie); + + static void sock_inuse_add(struct net *net, int val); + +@@ -526,6 +528,18 @@ discard_and_relse: + } + EXPORT_SYMBOL(__sk_receive_skb); + ++u64 __sock_gen_cookie(struct sock *sk) ++{ ++ while (1) { ++ u64 res = atomic64_read(&sk->sk_cookie); ++ ++ if (res) ++ return res; ++ res = gen_cookie_next(&sock_cookie); ++ atomic64_cmpxchg(&sk->sk_cookie, 0, res); ++ } ++} ++ + struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie) + { + struct dst_entry *dst = __sk_dst_get(sk); +@@ -1834,9 +1848,11 @@ static void __sk_free(struct sock *sk) + if (likely(sk->sk_net_refcnt)) + sock_inuse_add(sock_net(sk), -1); + ++#ifdef CONFIG_SOCK_DIAG + if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk))) + sock_diag_broadcast_destroy(sk); + else ++#endif + sk_destruct(sk); + } + +--- a/net/core/sock_diag.c ++++ b/net/core/sock_diag.c +@@ -11,7 +11,6 @@ + #include + #include + #include +-#include + #include + #include + +@@ -20,20 +19,6 @@ static int (*inet_rcv_compat)(struct sk_ + static DEFINE_MUTEX(sock_diag_table_mutex); + static struct workqueue_struct *broadcast_wq; + +-DEFINE_COOKIE(sock_cookie); +- +-u64 __sock_gen_cookie(struct sock *sk) +-{ +- while (1) { +- u64 res = atomic64_read(&sk->sk_cookie); +- +- if (res) +- return res; +- res = gen_cookie_next(&sock_cookie); +- atomic64_cmpxchg(&sk->sk_cookie, 0, res); +- } +-} +- + int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie) + { + u64 res; +--- a/net/ipv4/Kconfig ++++ b/net/ipv4/Kconfig +@@ -414,6 +414,7 @@ config INET_TUNNEL + + config INET_DIAG + tristate "INET: socket monitoring interface" ++ select SOCK_DIAG + default y + help + Support for INET (TCP, DCCP, etc) socket monitoring interface used by +--- a/net/netlink/Kconfig ++++ b/net/netlink/Kconfig +@@ -5,6 +5,7 @@ + + config NETLINK_DIAG + tristate "NETLINK: socket monitoring interface" ++ select SOCK_DIAG + default n + help + Support for NETLINK socket monitoring interface used by the ss tool. +--- a/net/packet/Kconfig ++++ b/net/packet/Kconfig +@@ -19,6 +19,7 @@ config PACKET + config PACKET_DIAG + tristate "Packet: sockets monitoring interface" + depends on PACKET ++ select SOCK_DIAG + default n + help + Support for PF_PACKET sockets monitoring interface used by the ss tool. +--- a/net/unix/Kconfig ++++ b/net/unix/Kconfig +@@ -28,6 +28,7 @@ config UNIX_SCM + config UNIX_DIAG + tristate "UNIX: socket monitoring interface" + depends on UNIX ++ select SOCK_DIAG + default n + help + Support for UNIX socket monitoring interface used by the ss tool. diff --git a/target/linux/generic/hack-5.15/902-debloat_proc.patch b/target/linux/generic/hack-5.15/902-debloat_proc.patch new file mode 100644 index 0000000000..33a3e3c5d5 --- /dev/null +++ b/target/linux/generic/hack-5.15/902-debloat_proc.patch @@ -0,0 +1,408 @@ +From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 8 Jul 2017 08:20:09 +0200 +Subject: debloat: procfs + +Signed-off-by: Felix Fietkau +--- + fs/locks.c | 2 ++ + fs/proc/Kconfig | 5 +++++ + fs/proc/consoles.c | 3 +++ + fs/proc/proc_tty.c | 11 ++++++++++- + include/net/snmp.h | 18 +++++++++++++++++- + ipc/msg.c | 3 +++ + ipc/sem.c | 2 ++ + ipc/shm.c | 2 ++ + ipc/util.c | 3 +++ + kernel/exec_domain.c | 2 ++ + kernel/irq/proc.c | 9 +++++++++ + kernel/time/timer_list.c | 2 ++ + mm/vmalloc.c | 2 ++ + mm/vmstat.c | 8 +++++--- + net/8021q/vlanproc.c | 6 ++++++ + net/core/net-procfs.c | 18 ++++++++++++------ + net/core/sock.c | 2 ++ + net/ipv4/fib_trie.c | 18 ++++++++++++------ + net/ipv4/proc.c | 3 +++ + net/ipv4/route.c | 3 +++ + 20 files changed, 105 insertions(+), 17 deletions(-) + +--- a/fs/locks.c ++++ b/fs/locks.c +@@ -2993,6 +2993,8 @@ static const struct seq_operations locks + + static int __init proc_locks_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; + proc_create_seq_private("locks", 0, NULL, &locks_seq_operations, + sizeof(struct locks_iterator), NULL); + return 0; +--- a/fs/proc/Kconfig ++++ b/fs/proc/Kconfig +@@ -100,6 +100,11 @@ config PROC_CHILDREN + Say Y if you are running any user-space software which takes benefit from + this interface. For example, rkt is such a piece of software. + ++config PROC_STRIPPED ++ default n ++ depends on EXPERT ++ bool "Strip non-essential /proc functionality to reduce code size" ++ + config PROC_PID_ARCH_STATUS + def_bool n + depends on PROC_FS +--- a/fs/proc/consoles.c ++++ b/fs/proc/consoles.c +@@ -92,6 +92,9 @@ static const struct seq_operations conso + + static int __init proc_consoles_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; ++ + proc_create_seq("consoles", 0, NULL, &consoles_op); + return 0; + } +--- a/fs/proc/proc_tty.c ++++ b/fs/proc/proc_tty.c +@@ -133,7 +133,10 @@ static const struct seq_operations tty_d + void proc_tty_register_driver(struct tty_driver *driver) + { + struct proc_dir_entry *ent; +- ++ ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + if (!driver->driver_name || driver->proc_entry || + !driver->ops->proc_show) + return; +@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t + { + struct proc_dir_entry *ent; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + ent = driver->proc_entry; + if (!ent) + return; +@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t + */ + void __init proc_tty_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + if (!proc_mkdir("tty", NULL)) + return; + proc_mkdir("tty/ldisc", NULL); /* Preserved: it's userspace visible */ +--- a/include/net/snmp.h ++++ b/include/net/snmp.h +@@ -124,6 +124,21 @@ struct linux_tls_mib { + #define DECLARE_SNMP_STAT(type, name) \ + extern __typeof__(type) __percpu *name + ++#ifdef CONFIG_PROC_STRIPPED ++#define __SNMP_STATS_DUMMY(mib) \ ++ do { (void) mib->mibs[0]; } while(0) ++ ++#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib) ++#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib) ++#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib) ++#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib) ++#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib) ++#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib) ++#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib) ++#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib) ++ ++#else ++ + #define __SNMP_INC_STATS(mib, field) \ + __this_cpu_inc(mib->mibs[field]) + +@@ -154,8 +169,9 @@ struct linux_tls_mib { + __this_cpu_add(ptr[basefield##OCTETS], addend); \ + } while (0) + ++#endif + +-#if BITS_PER_LONG==32 ++#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED) + + #define __SNMP_ADD_STATS64(mib, field, addend) \ + do { \ +--- a/ipc/msg.c ++++ b/ipc/msg.c +@@ -1350,6 +1350,9 @@ void __init msg_init(void) + { + msg_init_ns(&init_ipc_ns); + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + ipc_init_proc_interface("sysvipc/msg", + " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n", + IPC_MSG_IDS, sysvipc_msg_proc_show); +--- a/ipc/sem.c ++++ b/ipc/sem.c +@@ -266,6 +266,8 @@ void sem_exit_ns(struct ipc_namespace *n + void __init sem_init(void) + { + sem_init_ns(&init_ipc_ns); ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; + ipc_init_proc_interface("sysvipc/sem", + " key semid perms nsems uid gid cuid cgid otime ctime\n", + IPC_SEM_IDS, sysvipc_sem_proc_show); +--- a/ipc/shm.c ++++ b/ipc/shm.c +@@ -154,6 +154,8 @@ pure_initcall(ipc_ns_init); + + void __init shm_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; + ipc_init_proc_interface("sysvipc/shm", + #if BITS_PER_LONG <= 32 + " key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime rss swap\n", +--- a/ipc/util.c ++++ b/ipc/util.c +@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons + struct proc_dir_entry *pde; + struct ipc_proc_iface *iface; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + iface = kmalloc(sizeof(*iface), GFP_KERNEL); + if (!iface) + return; +--- a/kernel/exec_domain.c ++++ b/kernel/exec_domain.c +@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct + + static int __init proc_execdomains_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; + proc_create_single("execdomains", 0, NULL, execdomains_proc_show); + return 0; + } +--- a/kernel/irq/proc.c ++++ b/kernel/irq/proc.c +@@ -341,6 +341,9 @@ void register_irq_proc(unsigned int irq, + void __maybe_unused *irqp = (void *)(unsigned long) irq; + char name [MAX_NAMELEN]; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) ++ return; ++ + if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip)) + return; + +@@ -394,6 +397,9 @@ void unregister_irq_proc(unsigned int ir + { + char name [MAX_NAMELEN]; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) ++ return; ++ + if (!root_irq_dir || !desc->dir) + return; + #ifdef CONFIG_SMP +@@ -432,6 +438,9 @@ void init_irq_proc(void) + unsigned int irq; + struct irq_desc *desc; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP)) ++ return; ++ + /* create /proc/irq */ + root_irq_dir = proc_mkdir("irq", NULL); + if (!root_irq_dir) +--- a/kernel/time/timer_list.c ++++ b/kernel/time/timer_list.c +@@ -370,6 +370,8 @@ static int __init init_timer_list_procfs + { + struct proc_dir_entry *pe; + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; + pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops, + sizeof(struct timer_list_iter), NULL); + if (!pe) +--- a/mm/vmalloc.c ++++ b/mm/vmalloc.c +@@ -3572,6 +3572,8 @@ static const struct seq_operations vmall + + static int __init proc_vmalloc_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; + if (IS_ENABLED(CONFIG_NUMA)) + proc_create_seq_private("vmallocinfo", 0400, NULL, + &vmalloc_op, +--- a/mm/vmstat.c ++++ b/mm/vmstat.c +@@ -2044,10 +2044,12 @@ void __init init_mm_internals(void) + start_shepherd_timer(); + #endif + #ifdef CONFIG_PROC_FS +- proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op); +- proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { ++ proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op); ++ proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op); ++ proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op); ++ } + proc_create_seq("vmstat", 0444, NULL, &vmstat_op); +- proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op); + #endif + } + +--- a/net/8021q/vlanproc.c ++++ b/net/8021q/vlanproc.c +@@ -93,6 +93,9 @@ void vlan_proc_cleanup(struct net *net) + { + struct vlan_net *vn = net_generic(net, vlan_net_id); + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return; ++ + if (vn->proc_vlan_conf) + remove_proc_entry(name_conf, vn->proc_vlan_dir); + +@@ -112,6 +115,9 @@ int __net_init vlan_proc_init(struct net + { + struct vlan_net *vn = net_generic(net, vlan_net_id); + ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; ++ + vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net); + if (!vn->proc_vlan_dir) + goto err; +--- a/net/core/net-procfs.c ++++ b/net/core/net-procfs.c +@@ -320,10 +320,12 @@ static int __net_init dev_proc_net_init( + if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops, + sizeof(struct seq_net_private))) + goto out; +- if (!proc_create_seq("softnet_stat", 0444, net->proc_net, ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && ++ !proc_create_seq("softnet_stat", 0444, net->proc_net, + &softnet_seq_ops)) + goto out_dev; +- if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops, ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && ++ !proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops, + sizeof(struct seq_net_private))) + goto out_softnet; + +@@ -333,9 +335,11 @@ static int __net_init dev_proc_net_init( + out: + return rc; + out_ptype: +- remove_proc_entry("ptype", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ remove_proc_entry("ptype", net->proc_net); + out_softnet: +- remove_proc_entry("softnet_stat", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ remove_proc_entry("softnet_stat", net->proc_net); + out_dev: + remove_proc_entry("dev", net->proc_net); + goto out; +@@ -345,8 +349,10 @@ static void __net_exit dev_proc_net_exit + { + wext_proc_exit(net); + +- remove_proc_entry("ptype", net->proc_net); +- remove_proc_entry("softnet_stat", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { ++ remove_proc_entry("ptype", net->proc_net); ++ remove_proc_entry("softnet_stat", net->proc_net); ++ } + remove_proc_entry("dev", net->proc_net); + } + +--- a/net/core/sock.c ++++ b/net/core/sock.c +@@ -3699,6 +3699,8 @@ static __net_initdata struct pernet_oper + + static int __init proto_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; + return register_pernet_subsys(&proto_net_ops); + } + +--- a/net/ipv4/fib_trie.c ++++ b/net/ipv4/fib_trie.c +@@ -2986,11 +2986,13 @@ static const struct seq_operations fib_r + + int __net_init fib_proc_init(struct net *net) + { +- if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops, ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && ++ !proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops, + sizeof(struct fib_trie_iter))) + goto out1; + +- if (!proc_create_net_single("fib_triestat", 0444, net->proc_net, ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) && ++ !proc_create_net_single("fib_triestat", 0444, net->proc_net, + fib_triestat_seq_show, NULL)) + goto out2; + +@@ -3001,17 +3003,21 @@ int __net_init fib_proc_init(struct net + return 0; + + out3: +- remove_proc_entry("fib_triestat", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ remove_proc_entry("fib_triestat", net->proc_net); + out2: +- remove_proc_entry("fib_trie", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ remove_proc_entry("fib_trie", net->proc_net); + out1: + return -ENOMEM; + } + + void __net_exit fib_proc_exit(struct net *net) + { +- remove_proc_entry("fib_trie", net->proc_net); +- remove_proc_entry("fib_triestat", net->proc_net); ++ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) { ++ remove_proc_entry("fib_trie", net->proc_net); ++ remove_proc_entry("fib_triestat", net->proc_net); ++ } + remove_proc_entry("route", net->proc_net); + } + +--- a/net/ipv4/proc.c ++++ b/net/ipv4/proc.c +@@ -528,5 +528,8 @@ static __net_initdata struct pernet_oper + + int __init ip_misc_proc_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; ++ + return register_pernet_subsys(&ip_proc_ops); + } +--- a/net/ipv4/route.c ++++ b/net/ipv4/route.c +@@ -410,6 +410,9 @@ static struct pernet_operations ip_rt_pr + + static int __init ip_rt_proc_init(void) + { ++ if (IS_ENABLED(CONFIG_PROC_STRIPPED)) ++ return 0; ++ + return register_pernet_subsys(&ip_rt_proc_ops); + } + diff --git a/target/linux/generic/hack-5.15/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.15/904-debloat_dma_buf.patch new file mode 100644 index 0000000000..54e78cedc8 --- /dev/null +++ b/target/linux/generic/hack-5.15/904-debloat_dma_buf.patch @@ -0,0 +1,92 @@ +From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sat, 8 Jul 2017 08:20:43 +0200 +Subject: debloat: dmabuf + +Signed-off-by: Felix Fietkau +--- + drivers/base/Kconfig | 2 +- + drivers/dma-buf/Makefile | 10 +++++++--- + drivers/dma-buf/dma-buf.c | 4 +++- + kernel/sched/core.c | 1 + + 4 files changed, 12 insertions(+), 5 deletions(-) + +--- a/drivers/base/Kconfig ++++ b/drivers/base/Kconfig +@@ -184,7 +184,7 @@ config SOC_BUS + source "drivers/base/regmap/Kconfig" + + config DMA_SHARED_BUFFER +- bool ++ tristate + default n + select IRQ_WORK + help +--- a/drivers/dma-buf/heaps/Makefile ++++ b/drivers/dma-buf/heaps/Makefile +@@ -1,4 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0 +-obj-y += heap-helpers.o +-obj-$(CONFIG_DMABUF_HEAPS_SYSTEM) += system_heap.o +-obj-$(CONFIG_DMABUF_HEAPS_CMA) += cma_heap.o ++dma-buf-objs-y += heap-helpers.o ++dma-buf-objs-$(CONFIG_DMABUF_HEAPS_SYSTEM) += system_heap.o ++dma-buf-objs-$(CONFIG_DMABUF_HEAPS_CMA) += cma_heap.o +--- a/drivers/dma-buf/Makefile ++++ b/drivers/dma-buf/Makefile +@@ -1,15 +1,19 @@ + # SPDX-License-Identifier: GPL-2.0-only +-obj-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \ ++obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o ++ ++dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \ + dma-resv.o seqno-fence.o +-obj-$(CONFIG_DMABUF_HEAPS) += dma-heap.o +-obj-$(CONFIG_DMABUF_HEAPS) += heaps/ +-obj-$(CONFIG_SYNC_FILE) += sync_file.o +-obj-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o +-obj-$(CONFIG_UDMABUF) += udmabuf.o ++dma-buf-objs-$(CONFIG_DMABUF_HEAPS) += dma-heap.o ++obj-$(CONFIG_DMABUF_HEAPS) += heaps/ ++dma-buf-objs-$(CONFIG_SYNC_FILE) += sync_file.o ++dma-buf-objs-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o ++dma-buf-objs-$(CONFIG_UDMABUF) += udmabuf.o + + dmabuf_selftests-y := \ + selftest.o \ + st-dma-fence.o \ + st-dma-fence-chain.o + +-obj-$(CONFIG_DMABUF_SELFTESTS) += dmabuf_selftests.o ++dma-buf-objs-$(CONFIG_DMABUF_SELFTESTS) += dmabuf_selftests.o ++ ++dma-shared-buffer-objs := $(dma-buf-objs-y) +--- a/drivers/dma-buf/dma-buf.c ++++ b/drivers/dma-buf/dma-buf.c +@@ -1419,4 +1419,5 @@ static void __exit dma_buf_deinit(void) + dma_buf_uninit_debugfs(); + kern_unmount(dma_buf_mnt); + } +-__exitcall(dma_buf_deinit); ++module_exit(dma_buf_deinit); ++MODULE_LICENSE("GPL"); +--- a/kernel/sched/core.c ++++ b/kernel/sched/core.c +@@ -3065,6 +3065,7 @@ int wake_up_state(struct task_struct *p, + { + return try_to_wake_up(p, state, 0); + } ++EXPORT_SYMBOL_GPL(wake_up_state); + + /* + * Perform scheduler related setup for a newly forked process p. +--- a/fs/d_path.c ++++ b/fs/d_path.c +@@ -311,6 +311,7 @@ char *dynamic_dname(struct dentry *dentr + buffer += buflen - sz; + return memcpy(buffer, temp, sz); + } ++EXPORT_SYMBOL_GPL(dynamic_dname); + + char *simple_dname(struct dentry *dentry, char *buffer, int buflen) + { diff --git a/target/linux/generic/hack-5.15/910-kobject_uevent.patch b/target/linux/generic/hack-5.15/910-kobject_uevent.patch new file mode 100644 index 0000000000..c4c41ca400 --- /dev/null +++ b/target/linux/generic/hack-5.15/910-kobject_uevent.patch @@ -0,0 +1,32 @@ +From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sun, 16 Jul 2017 16:56:10 +0200 +Subject: lib: add uevent_next_seqnum() + +Signed-off-by: Felix Fietkau +--- + include/linux/kobject.h | 5 +++++ + lib/kobject_uevent.c | 37 +++++++++++++++++++++++++++++++++++++ + 2 files changed, 42 insertions(+) + +--- a/lib/kobject_uevent.c ++++ b/lib/kobject_uevent.c +@@ -179,6 +179,18 @@ out: + return r; + } + ++u64 uevent_next_seqnum(void) ++{ ++ u64 seq; ++ ++ mutex_lock(&uevent_sock_mutex); ++ seq = ++uevent_seqnum; ++ mutex_unlock(&uevent_sock_mutex); ++ ++ return seq; ++} ++EXPORT_SYMBOL_GPL(uevent_next_seqnum); ++ + /** + * kobject_synth_uevent - send synthetic uevent with arguments + * diff --git a/target/linux/generic/hack-5.15/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-5.15/911-kobject_add_broadcast_uevent.patch new file mode 100644 index 0000000000..a487d55193 --- /dev/null +++ b/target/linux/generic/hack-5.15/911-kobject_add_broadcast_uevent.patch @@ -0,0 +1,76 @@ +From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sun, 16 Jul 2017 16:56:10 +0200 +Subject: lib: add uevent_next_seqnum() + +Signed-off-by: Felix Fietkau +--- + include/linux/kobject.h | 5 +++++ + lib/kobject_uevent.c | 37 +++++++++++++++++++++++++++++++++++++ + 2 files changed, 42 insertions(+) + +--- a/include/linux/kobject.h ++++ b/include/linux/kobject.h +@@ -32,6 +32,8 @@ + #define UEVENT_NUM_ENVP 64 /* number of env pointers */ + #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */ + ++struct sk_buff; ++ + #ifdef CONFIG_UEVENT_HELPER + /* path to the userspace helper executed on an event */ + extern char uevent_helper[]; +@@ -244,4 +246,7 @@ int kobject_synth_uevent(struct kobject + __printf(2, 3) + int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...); + ++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, ++ gfp_t allocation); ++ + #endif /* _KOBJECT_H_ */ +--- a/lib/kobject_uevent.c ++++ b/lib/kobject_uevent.c +@@ -691,6 +691,43 @@ int add_uevent_var(struct kobj_uevent_en + EXPORT_SYMBOL_GPL(add_uevent_var); + + #if defined(CONFIG_NET) ++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, ++ gfp_t allocation) ++{ ++ struct uevent_sock *ue_sk; ++ int err = 0; ++ ++ /* send netlink message */ ++ mutex_lock(&uevent_sock_mutex); ++ list_for_each_entry(ue_sk, &uevent_sock_list, list) { ++ struct sock *uevent_sock = ue_sk->sk; ++ struct sk_buff *skb2; ++ ++ skb2 = skb_clone(skb, allocation); ++ if (!skb2) ++ break; ++ ++ err = netlink_broadcast(uevent_sock, skb2, pid, group, ++ allocation); ++ if (err) ++ break; ++ } ++ mutex_unlock(&uevent_sock_mutex); ++ ++ kfree_skb(skb); ++ return err; ++} ++#else ++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group, ++ gfp_t allocation) ++{ ++ kfree_skb(skb); ++ return 0; ++} ++#endif ++EXPORT_SYMBOL_GPL(broadcast_uevent); ++ ++#if defined(CONFIG_NET) + static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb, + struct netlink_ext_ack *extack) + { diff --git a/target/linux/generic/hack-5.15/920-device_tree_cmdline.patch b/target/linux/generic/hack-5.15/920-device_tree_cmdline.patch new file mode 100644 index 0000000000..27d4d7f1e5 --- /dev/null +++ b/target/linux/generic/hack-5.15/920-device_tree_cmdline.patch @@ -0,0 +1,12 @@ +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1055,6 +1055,9 @@ int __init early_init_dt_scan_chosen(uns + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); ++ p = of_get_flat_dt_prop(node, "bootargs-append", &l); ++ if (p != NULL && l > 0) ++ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); + + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else diff --git a/target/linux/generic/pending-5.15/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch b/target/linux/generic/pending-5.15/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch new file mode 100644 index 0000000000..75f63728ec --- /dev/null +++ b/target/linux/generic/pending-5.15/050-dtc-checks-Drop-interrupt-provider-address-cells-check.patch @@ -0,0 +1,28 @@ +From d8d1a9a77863a8c7031ae82a1d461aa78eb72a7b Mon Sep 17 00:00:00 2001 +From: Rob Herring +Date: Mon, 11 Oct 2021 14:12:43 -0500 +Subject: [PATCH] checks: Drop interrupt provider '#address-cells' check + +'#address-cells' is only needed when parsing 'interrupt-map' properties, so +remove it from the common interrupt-provider test. + +Cc: Andre Przywara +Reviewed-by: David Gibson +Signed-off-by: Rob Herring +Message-Id: <20211011191245.1009682-3-robh@kernel.org> +Signed-off-by: David Gibson +--- +--- a/scripts/dtc/checks.c ++++ b/scripts/dtc/checks.c +@@ -1569,11 +1569,6 @@ static void check_interrupt_provider(str + if (!prop) + FAIL(c, dti, node, + "Missing #interrupt-cells in interrupt provider"); +- +- prop = get_property(node, "#address-cells"); +- if (!prop) +- FAIL(c, dti, node, +- "Missing #address-cells in interrupt provider"); + } + WARNING(interrupt_provider, check_interrupt_provider, NULL); + diff --git a/target/linux/generic/pending-5.15/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch b/target/linux/generic/pending-5.15/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch new file mode 100644 index 0000000000..282c8196e5 --- /dev/null +++ b/target/linux/generic/pending-5.15/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch @@ -0,0 +1,29 @@ +From: Felix Fietkau +Date: Thu, 22 Oct 2020 22:00:03 +0200 +Subject: [PATCH] compiler.h: only include asm/rwonce.h for kernel code + +This header file is not in uapi, which makes any user space code that includes +linux/compiler.h to fail with the error 'asm/rwonce.h: No such file or directory' + +Fixes: e506ea451254 ("compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h") +Signed-off-by: Felix Fietkau +--- + +--- a/include/linux/compiler.h ++++ b/include/linux/compiler.h +@@ -213,6 +213,8 @@ void ftrace_likely_update(struct ftrace_ + __v; \ + }) + ++#include ++ + #endif /* __KERNEL__ */ + + /* +@@ -245,6 +247,4 @@ static inline void *offset_to_ptr(const + */ + #define prevent_tail_call_optimization() mb() + +-#include +- + #endif /* __LINUX_COMPILER_H */ diff --git a/target/linux/generic/pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch b/target/linux/generic/pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch new file mode 100644 index 0000000000..824b9444ee --- /dev/null +++ b/target/linux/generic/pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch @@ -0,0 +1,11 @@ +--- a/include/uapi/linux/swab.h ++++ b/include/uapi/linux/swab.h +@@ -3,7 +3,7 @@ + #define _UAPI_LINUX_SWAB_H + + #include +-#include ++#include + #include + #include + diff --git a/target/linux/generic/pending-5.15/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-5.15/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch new file mode 100644 index 0000000000..cc9f99e8b0 --- /dev/null +++ b/target/linux/generic/pending-5.15/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch @@ -0,0 +1,57 @@ +From: Felix Fietkau +Date: Wed, 18 Apr 2018 10:50:05 +0200 +Subject: [PATCH] MIPS: only process negative stack offsets on stack traces + +Fixes endless back traces in cases where the compiler emits a stack +pointer increase in a branch delay slot (probably for some form of +function return). + +[ 3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low! +[ 3.480070] turning off the locking correctness validator. +[ 3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0 +[ 3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000 +[ 3.499764] 87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f +[ 3.508059] 00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000 +[ 3.516353] 00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000 +[ 3.524648] 806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000 +[ 3.532942] ... +[ 3.535362] Call Trace: +[ 3.537818] [<80010a48>] show_stack+0x58/0x100 +[ 3.542207] [<804c2f78>] dump_stack+0xe8/0x170 +[ 3.546613] [<80079f90>] save_trace+0xf0/0x110 +[ 3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c +[ 3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08 +[ 3.560337] [<8007de60>] lock_acquire+0x64/0x8c +[ 3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78 +[ 3.570186] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.579257] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.588329] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.597401] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.606473] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.615545] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.624619] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.633691] [<801b618c>] kernfs_notify+0x94/0xac +[ 3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0 +[ 3.642763] [<801b618c>] kernfs_notify+0x94/0xac + +Signed-off-by: Felix Fietkau +--- + +--- a/arch/mips/kernel/process.c ++++ b/arch/mips/kernel/process.c +@@ -380,6 +380,8 @@ static inline int is_sp_move_ins(union m + + if (ip->i_format.opcode == addiu_op || + ip->i_format.opcode == daddiu_op) { ++ if (ip->i_format.simmediate > 0) ++ return 0; + *frame_size = -ip->i_format.simmediate; + return 1; + } diff --git a/target/linux/generic/pending-5.15/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.15/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch new file mode 100644 index 0000000000..0d1d3e1137 --- /dev/null +++ b/target/linux/generic/pending-5.15/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch @@ -0,0 +1,82 @@ +From: Tobias Wolf +Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation + +An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any +kernel beyond version 4.3 resulting in: + +BUG: Bad page state in process swapper pfn:086ac + +bisect resulted in: + +a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit +commit a1c34a3bf00af2cede839879502e12dc68491ad5 +Author: Laura Abbott +Date: Thu Nov 5 18:48:46 2015 -0800 + + mm: Don't offset memmap for flatmem + + Srinivas Kandagatla reported bad page messages when trying to remove the + bottom 2MB on an ARM based IFC6410 board + + BUG: Bad page state in process swapper pfn:fffa8 + page:ef7fb500 count:0 mapcount:0 mapping: (null) index:0x0 + flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked) + page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set + bad because of flags: + flags: 0x200041(locked|active|mlocked) + Modules linked in: + CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty +#816 + Hardware name: Qualcomm (Flattened Device Tree) + unwind_backtrace + show_stack + dump_stack + bad_page + free_pages_prepare + free_hot_cold_page + __free_pages + free_highmem_page + mem_init + start_kernel + Disabling lock debugging due to kernel taint + [...] +:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4 +0a8156f848733dfa21e16c196dfb6c0a76290709 M mm + +This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by +page_to_pfn anymore. + +The following output was generated with two hacked in printk statements: + +printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map - +(pgdat->node_start_pfn - ARCH_PFN_OFFSET)); + if (page_to_pfn(mem_map) != pgdat->node_start_pfn) + mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET); +printk("after %p\n", mem_map); + +Output: + +[ 0.000000] before 8861b280 vs. 8861b280 or 8851b280 +[ 0.000000] after 8851b280 + +As seen in the first line mem_map with subtraction of offset does not equal the +mem_map after subtraction of ARCH_PFN_OFFSET. + +After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the +previously calculated offset is zero for the named platform it is able to boot +4.4 and 4.9-rc7 again. + +Signed-off-by: Tobias Wolf +--- + +--- a/mm/page_alloc.c ++++ b/mm/page_alloc.c +@@ -7055,7 +7055,7 @@ static void __ref alloc_node_mem_map(str + if (pgdat == NODE_DATA(0)) { + mem_map = NODE_DATA(0)->node_mem_map; + if (page_to_pfn(mem_map) != pgdat->node_start_pfn) +- mem_map -= offset; ++ mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET); + } + #endif + } diff --git a/target/linux/generic/pending-5.15/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-5.15/130-add-linux-spidev-compatible-si3210.patch new file mode 100644 index 0000000000..355e900a3b --- /dev/null +++ b/target/linux/generic/pending-5.15/130-add-linux-spidev-compatible-si3210.patch @@ -0,0 +1,18 @@ +From: Giuseppe Lippolis +Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts + +Signed-off-by: Giuseppe Lippolis +--- + drivers/spi/spidev.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/spi/spidev.c ++++ b/drivers/spi/spidev.c +@@ -682,6 +682,7 @@ static const struct of_device_id spidev_ + { .compatible = "lwn,bk4" }, + { .compatible = "dh,dhcom-board" }, + { .compatible = "menlo,m53cpld" }, ++ { .compatible = "siliconlabs,si3210" }, + {}, + }; + MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff --git a/target/linux/generic/pending-5.15/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-5.15/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch new file mode 100644 index 0000000000..e48da41fae --- /dev/null +++ b/target/linux/generic/pending-5.15/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch @@ -0,0 +1,78 @@ +From: Felix Fietkau +Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support + +It is required for renames on overlayfs + +Signed-off-by: Felix Fietkau +--- + +--- a/fs/jffs2/dir.c ++++ b/fs/jffs2/dir.c +@@ -609,7 +609,8 @@ static int jffs2_rmdir (struct inode *di + return ret; + } + +-static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, umode_t mode, dev_t rdev) ++static int __jffs2_mknod (struct inode *dir_i, struct dentry *dentry, ++ umode_t mode, dev_t rdev, bool whiteout) + { + struct jffs2_inode_info *f, *dir_f; + struct jffs2_sb_info *c; +@@ -748,7 +749,11 @@ static int jffs2_mknod (struct inode *di + mutex_unlock(&dir_f->sem); + jffs2_complete_reservation(c); + +- d_instantiate_new(dentry, inode); ++ if (!whiteout) ++ d_instantiate_new(dentry, inode); ++ else ++ unlock_new_inode(inode); ++ + return 0; + + fail: +@@ -756,6 +761,17 @@ static int jffs2_mknod (struct inode *di + return ret; + } + ++static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, umode_t mode, dev_t rdev) ++{ ++ return __jffs2_mknod(dir_i, dentry, mode, rdev, false); ++} ++ ++static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry) ++{ ++ return __jffs2_mknod(old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE, ++ WHITEOUT_DEV, true); ++} ++ + static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, + struct inode *new_dir_i, struct dentry *new_dentry, + unsigned int flags) +@@ -766,7 +782,7 @@ static int jffs2_rename (struct inode *o + uint8_t type; + uint32_t now; + +- if (flags & ~RENAME_NOREPLACE) ++ if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT)) + return -EINVAL; + + /* The VFS will check for us and prevent trying to rename a +@@ -832,9 +848,14 @@ static int jffs2_rename (struct inode *o + if (d_is_dir(old_dentry) && !victim_f) + inc_nlink(new_dir_i); + +- /* Unlink the original */ +- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), +- old_dentry->d_name.name, old_dentry->d_name.len, NULL, now); ++ if (flags & RENAME_WHITEOUT) ++ /* Replace with whiteout */ ++ ret = jffs2_whiteout(old_dir_i, old_dentry); ++ else ++ /* Unlink the original */ ++ ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), ++ old_dentry->d_name.name, ++ old_dentry->d_name.len, NULL, now); + + /* We don't touch inode->i_nlink */ + diff --git a/target/linux/generic/pending-5.15/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-5.15/141-jffs2-add-RENAME_EXCHANGE-support.patch new file mode 100644 index 0000000000..dbc72339c6 --- /dev/null +++ b/target/linux/generic/pending-5.15/141-jffs2-add-RENAME_EXCHANGE-support.patch @@ -0,0 +1,73 @@ +From: Felix Fietkau +Subject: jffs2: add RENAME_EXCHANGE support + +Signed-off-by: Felix Fietkau +--- + +--- a/fs/jffs2/dir.c ++++ b/fs/jffs2/dir.c +@@ -779,18 +779,31 @@ static int jffs2_rename (struct inode *o + int ret; + struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); + struct jffs2_inode_info *victim_f = NULL; ++ struct inode *fst_inode = d_inode(old_dentry); ++ struct inode *snd_inode = d_inode(new_dentry); + uint8_t type; + uint32_t now; + +- if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT)) ++ if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE)) + return -EINVAL; + ++ if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) { ++ if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) { ++ inc_nlink(new_dir_i); ++ drop_nlink(old_dir_i); ++ } ++ else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) { ++ drop_nlink(new_dir_i); ++ inc_nlink(old_dir_i); ++ } ++ } ++ + /* The VFS will check for us and prevent trying to rename a + * file over a directory and vice versa, but if it's a directory, + * the VFS can't check whether the victim is empty. The filesystem + * needs to do that for itself. + */ +- if (d_really_is_positive(new_dentry)) { ++ if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) { + victim_f = JFFS2_INODE_INFO(d_inode(new_dentry)); + if (d_is_dir(new_dentry)) { + struct jffs2_full_dirent *fd; +@@ -825,7 +838,7 @@ static int jffs2_rename (struct inode *o + if (ret) + return ret; + +- if (victim_f) { ++ if (victim_f && !(flags & RENAME_EXCHANGE)) { + /* There was a victim. Kill it off nicely */ + if (d_is_dir(new_dentry)) + clear_nlink(d_inode(new_dentry)); +@@ -851,6 +864,12 @@ static int jffs2_rename (struct inode *o + if (flags & RENAME_WHITEOUT) + /* Replace with whiteout */ + ret = jffs2_whiteout(old_dir_i, old_dentry); ++ else if (flags & RENAME_EXCHANGE) ++ /* Replace the original */ ++ ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i), ++ d_inode(new_dentry)->i_ino, type, ++ old_dentry->d_name.name, old_dentry->d_name.len, ++ now); + else + /* Unlink the original */ + ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i), +@@ -882,7 +901,7 @@ static int jffs2_rename (struct inode *o + return ret; + } + +- if (d_is_dir(old_dentry)) ++ if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE)) + drop_nlink(old_dir_i); + + new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now); diff --git a/target/linux/generic/pending-5.15/142-jffs2-add-splice-ops.patch b/target/linux/generic/pending-5.15/142-jffs2-add-splice-ops.patch new file mode 100644 index 0000000000..de847a1f5c --- /dev/null +++ b/target/linux/generic/pending-5.15/142-jffs2-add-splice-ops.patch @@ -0,0 +1,20 @@ +From: Felix Fietkau +Subject: jffs2: add splice ops + +Add splice_read using generic_file_splice_read. +Add splice_write using iter_file_splice_write + +Signed-off-by: Felix Fietkau +--- + +--- a/fs/jffs2/file.c ++++ b/fs/jffs2/file.c +@@ -53,6 +53,8 @@ const struct file_operations jffs2_file_ + .open = generic_file_open, + .read_iter = generic_file_read_iter, + .write_iter = generic_file_write_iter, ++ .splice_read = generic_file_splice_read, ++ .splice_write = iter_file_splice_write, + .unlocked_ioctl=jffs2_ioctl, + .mmap = generic_file_readonly_mmap, + .fsync = jffs2_fsync, diff --git a/target/linux/generic/pending-5.15/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-5.15/150-bridge_allow_receiption_on_disabled_port.patch new file mode 100644 index 0000000000..6de22b1c7d --- /dev/null +++ b/target/linux/generic/pending-5.15/150-bridge_allow_receiption_on_disabled_port.patch @@ -0,0 +1,45 @@ +From: Stephen Hemminger +Subject: bridge: allow receiption on disabled port + +When an ethernet device is enslaved to a bridge, and the bridge STP +detects loss of carrier (or operational state down), then normally +packet receiption is blocked. + +This breaks control applications like WPA which maybe expecting to +receive packets to negotiate to bring link up. The bridge needs to +block forwarding packets from these disabled ports, but there is no +hard requirement to not allow local packet delivery. + +Signed-off-by: Stephen Hemminger +Signed-off-by: Felix Fietkau + +--- a/net/bridge/br_input.c ++++ b/net/bridge/br_input.c +@@ -195,6 +195,9 @@ static void __br_handle_local_finish(str + /* note: already called with rcu_read_lock */ + static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb) + { ++ struct net_bridge_port *p = br_port_get_rcu(skb->dev); ++ ++ if (p->state != BR_STATE_DISABLED) + __br_handle_local_finish(skb); + + /* return 1 to signal the okfn() was called so it's ok to use the skb */ +@@ -348,6 +351,17 @@ static rx_handler_result_t br_handle_fra + + forward: + switch (p->state) { ++ case BR_STATE_DISABLED: ++ if (ether_addr_equal(p->br->dev->dev_addr, dest)) ++ skb->pkt_type = PACKET_HOST; ++ ++ if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, ++ dev_net(skb->dev), NULL, skb, skb->dev, NULL, ++ br_handle_local_finish) == 1) { ++ return RX_HANDLER_PASS; ++ } ++ break; ++ + case BR_STATE_FORWARDING: + case BR_STATE_LEARNING: + if (ether_addr_equal(p->br->dev->dev_addr, dest)) diff --git a/target/linux/generic/pending-5.15/190-rtc-rs5c372-support_alarms_up_to_1_week.patch b/target/linux/generic/pending-5.15/190-rtc-rs5c372-support_alarms_up_to_1_week.patch new file mode 100644 index 0000000000..13b79b5c09 --- /dev/null +++ b/target/linux/generic/pending-5.15/190-rtc-rs5c372-support_alarms_up_to_1_week.patch @@ -0,0 +1,94 @@ +From: Daniel González Cabanelas +Subject: [PATCH 1/2] rtc: rs5c372: support alarms up to 1 week + +The Ricoh R2221x, R2223x, RS5C372, RV5C387A chips can handle 1 week +alarms. + +Read the "wday" alarm register and convert it to a date to support up 1 +week in our driver. + +Signed-off-by: Daniel González Cabanelas +--- + drivers/rtc/rtc-rs5c372.c | 48 ++++++++++++++++++++++++++++++++++----- + 1 file changed, 42 insertions(+), 6 deletions(-) + +--- a/drivers/rtc/rtc-rs5c372.c ++++ b/drivers/rtc/rtc-rs5c372.c +@@ -393,7 +393,9 @@ static int rs5c_read_alarm(struct device + { + struct i2c_client *client = to_i2c_client(dev); + struct rs5c372 *rs5c = i2c_get_clientdata(client); +- int status; ++ int status, wday_offs; ++ struct rtc_time rtc; ++ unsigned long alarm_secs; + + status = rs5c_get_regs(rs5c); + if (status < 0) +@@ -403,6 +405,30 @@ static int rs5c_read_alarm(struct device + t->time.tm_sec = 0; + t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f); + t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]); ++ t->time.tm_wday = ffs(rs5c->regs[RS5C_REG_ALARM_A_WDAY] & 0x7f) - 1; ++ ++ /* determine the day, month and year based on alarm wday, taking as a ++ * reference the current time from the rtc ++ */ ++ status = rs5c372_rtc_read_time(dev, &rtc); ++ if (status < 0) ++ return status; ++ ++ wday_offs = t->time.tm_wday - rtc.tm_wday; ++ alarm_secs = mktime64(rtc.tm_year + 1900, ++ rtc.tm_mon + 1, ++ rtc.tm_mday + wday_offs, ++ t->time.tm_hour, ++ t->time.tm_min, ++ t->time.tm_sec); ++ ++ if (wday_offs < 0 || (wday_offs == 0 && ++ (t->time.tm_hour < rtc.tm_hour || ++ (t->time.tm_hour == rtc.tm_hour && ++ t->time.tm_min <= rtc.tm_min)))) ++ alarm_secs += 7 * 86400; ++ ++ rtc_time64_to_tm(alarm_secs, &t->time); + + /* ... and status */ + t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE); +@@ -417,12 +443,20 @@ static int rs5c_set_alarm(struct device + struct rs5c372 *rs5c = i2c_get_clientdata(client); + int status, addr, i; + unsigned char buf[3]; ++ struct rtc_time rtc_tm; ++ unsigned long rtc_secs, alarm_secs; + +- /* only handle up to 24 hours in the future, like RTC_ALM_SET */ +- if (t->time.tm_mday != -1 +- || t->time.tm_mon != -1 +- || t->time.tm_year != -1) ++ /* chip only can handle alarms up to one week in the future*/ ++ status = rs5c372_rtc_read_time(dev, &rtc_tm); ++ if (status) ++ return status; ++ rtc_secs = rtc_tm_to_time64(&rtc_tm); ++ alarm_secs = rtc_tm_to_time64(&t->time); ++ if (alarm_secs >= rtc_secs + 7 * 86400) { ++ dev_err(dev, "%s: alarm maximum is one week in the future (%d)\n", ++ __func__, status); + return -EINVAL; ++ } + + /* REVISIT: round up tm_sec */ + +@@ -443,7 +477,9 @@ static int rs5c_set_alarm(struct device + /* set alarm */ + buf[0] = bin2bcd(t->time.tm_min); + buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour); +- buf[2] = 0x7f; /* any/all days */ ++ /* each bit is the day of the week, 0x7f means all days */ ++ buf[2] = (t->time.tm_wday >= 0 && t->time.tm_wday < 7) ? ++ BIT(t->time.tm_wday) : 0x7f; + + for (i = 0; i < sizeof(buf); i++) { + addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i); diff --git a/target/linux/generic/pending-5.15/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch b/target/linux/generic/pending-5.15/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch new file mode 100644 index 0000000000..7e9d0e66c0 --- /dev/null +++ b/target/linux/generic/pending-5.15/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch @@ -0,0 +1,70 @@ +From: Daniel González Cabanelas +Subject: [PATCH 2/2] rtc: rs5c372: let the alarm to be used as wakeup source + +Currently there is no use for the interrupts on the rs5c372 RTC and the +wakealarm isn't enabled. There are some devices like NASes which use this +RTC to wake up from the power off state when the INTR pin is activated by +the alarm clock. + +Enable the alarm and let to be used as a wakeup source. + +Tested on a Buffalo LS421DE NAS. + +Signed-off-by: Daniel González Cabanelas +--- + drivers/rtc/rtc-rs5c372.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/rtc/rtc-rs5c372.c ++++ b/drivers/rtc/rtc-rs5c372.c +@@ -654,6 +654,7 @@ static int rs5c372_probe(struct i2c_clie + int err = 0; + int smbus_mode = 0; + struct rs5c372 *rs5c372; ++ bool rs5c372_can_wakeup_device = false; + + dev_dbg(&client->dev, "%s\n", __func__); + +@@ -689,6 +690,12 @@ static int rs5c372_probe(struct i2c_clie + else + rs5c372->type = id->driver_data; + ++#ifdef CONFIG_OF ++ if(of_property_read_bool(client->dev.of_node, ++ "wakeup-source")) ++ rs5c372_can_wakeup_device = true; ++#endif ++ + /* we read registers 0x0f then 0x00-0x0f; skip the first one */ + rs5c372->regs = &rs5c372->buf[1]; + rs5c372->smbus = smbus_mode; +@@ -722,6 +729,8 @@ static int rs5c372_probe(struct i2c_clie + goto exit; + } + ++ rs5c372->has_irq = 1; ++ + /* if the oscillator lost power and no other software (like + * the bootloader) set it up, do it here. + * +@@ -748,6 +757,10 @@ static int rs5c372_probe(struct i2c_clie + ); + + /* REVISIT use client->irq to register alarm irq ... */ ++ if (rs5c372_can_wakeup_device) { ++ device_init_wakeup(&client->dev, true); ++ } ++ + rs5c372->rtc = devm_rtc_device_register(&client->dev, + rs5c372_driver.driver.name, + &rs5c372_rtc_ops, THIS_MODULE); +@@ -761,6 +774,9 @@ static int rs5c372_probe(struct i2c_clie + if (err) + goto exit; + ++ /* the rs5c372 alarm only supports a minute accuracy */ ++ rs5c372->rtc->uie_unsupported = 1; ++ + return 0; + + exit: diff --git a/target/linux/generic/pending-5.15/201-extra_optimization.patch b/target/linux/generic/pending-5.15/201-extra_optimization.patch new file mode 100644 index 0000000000..cb1de80764 --- /dev/null +++ b/target/linux/generic/pending-5.15/201-extra_optimization.patch @@ -0,0 +1,31 @@ +From: Felix Fietkau +Subject: Upgrade to Linux 2.6.19 + +- Includes large parts of the patch from #1021 by dpalffy +- Includes RB532 NAND driver changes by n0-1 + +[john@phrozen.org: feix will add this to his upstream queue] + +lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f +Signed-off-by: Felix Fietkau +--- + Makefile | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/Makefile ++++ b/Makefile +@@ -735,11 +735,11 @@ KBUILD_CFLAGS += $(call cc-disable-warni + KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) + + ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE +-KBUILD_CFLAGS += -O2 ++KBUILD_CFLAGS += -O2 $(EXTRA_OPTIMIZATION) + else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 +-KBUILD_CFLAGS += -O3 ++KBUILD_CFLAGS += -O3 $(EXTRA_OPTIMIZATION) + else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE +-KBUILD_CFLAGS += -Os ++KBUILD_CFLAGS += -Os -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION) + endif + + # Tell gcc to never replace conditional load with a non-conditional one diff --git a/target/linux/generic/pending-5.15/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-5.15/203-kallsyms_uncompressed.patch new file mode 100644 index 0000000000..348a5afa3d --- /dev/null +++ b/target/linux/generic/pending-5.15/203-kallsyms_uncompressed.patch @@ -0,0 +1,119 @@ +From: Felix Fietkau +Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx + +[john@phrozen.org: added to my upstream queue 30.12.2016] +lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed +Signed-off-by: Felix Fietkau +--- + init/Kconfig | 11 +++++++++++ + kernel/kallsyms.c | 8 ++++++++ + scripts/kallsyms.c | 12 ++++++++++++ + scripts/link-vmlinux.sh | 4 ++++ + 4 files changed, 35 insertions(+) + +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -1384,6 +1384,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW + the unaligned access emulation. + see arch/parisc/kernel/unaligned.c for reference + ++config KALLSYMS_UNCOMPRESSED ++ bool "Keep kallsyms uncompressed" ++ depends on KALLSYMS ++ help ++ Normally kallsyms contains compressed symbols (using a token table), ++ reducing the uncompressed kernel image size. Keeping the symbol table ++ uncompressed significantly improves the size of this part in compressed ++ kernel images. ++ ++ Say N unless you need compressed kernel images to be small. ++ + config HAVE_PCSPKR_PLATFORM + bool + +--- a/kernel/kallsyms.c ++++ b/kernel/kallsyms.c +@@ -77,6 +77,11 @@ static unsigned int kallsyms_expand_symb + * For every byte on the compressed symbol data, copy the table + * entry for that byte. + */ ++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED ++ memcpy(result, data + 1, len - 1); ++ result += len - 1; ++ len = 0; ++#endif + while (len) { + tptr = &kallsyms_token_table[kallsyms_token_index[*data]]; + data++; +@@ -109,6 +114,9 @@ tail: + */ + static char kallsyms_get_symbol_type(unsigned int off) + { ++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED ++ return kallsyms_names[off + 1]; ++#endif + /* + * Get just the first code, look it up in the token table, + * and return the first char from this token. +--- a/scripts/kallsyms.c ++++ b/scripts/kallsyms.c +@@ -58,6 +58,7 @@ static struct addr_range percpu_range = + static struct sym_entry **table; + static unsigned int table_size, table_cnt; + static int all_symbols; ++static int uncompressed; + static int absolute_percpu; + static int base_relative; + +@@ -486,6 +487,9 @@ static void write_src(void) + + free(markers); + ++ if (uncompressed) ++ return; ++ + output_label("kallsyms_token_table"); + off = 0; + for (i = 0; i < 256; i++) { +@@ -537,6 +541,9 @@ static unsigned char *find_token(unsigne + { + int i; + ++ if (uncompressed) ++ return NULL; ++ + for (i = 0; i < len - 1; i++) { + if (str[i] == token[0] && str[i+1] == token[1]) + return &str[i]; +@@ -609,6 +616,9 @@ static void optimize_result(void) + { + int i, best; + ++ if (uncompressed) ++ return; ++ + /* using the '\0' symbol last allows compress_symbols to use standard + * fast string functions */ + for (i = 255; i >= 0; i--) { +@@ -773,6 +783,8 @@ int main(int argc, char **argv) + absolute_percpu = 1; + else if (strcmp(argv[i], "--base-relative") == 0) + base_relative = 1; ++ else if (strcmp(argv[i], "--uncompressed") == 0) ++ uncompressed = 1; + else + usage(); + } +--- a/scripts/link-vmlinux.sh ++++ b/scripts/link-vmlinux.sh +@@ -186,6 +186,10 @@ kallsyms() + kallsymopt="${kallsymopt} --base-relative" + fi + ++ if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then ++ kallsymopt="${kallsymopt} --uncompressed" ++ fi ++ + info KSYMS ${2} + ${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${2} + } diff --git a/target/linux/generic/pending-5.15/205-backtrace_module_info.patch b/target/linux/generic/pending-5.15/205-backtrace_module_info.patch new file mode 100644 index 0000000000..f46877f254 --- /dev/null +++ b/target/linux/generic/pending-5.15/205-backtrace_module_info.patch @@ -0,0 +1,41 @@ +From: Felix Fietkau +Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries + +[john@phrozen.org: felix will add this to his upstream queue] + +lede-commit 53827cdc824556cda910b23ce5030c363b8f1461 +Signed-off-by: Felix Fietkau +--- + lib/vsprintf.c | 15 +++++++++++---- + 1 file changed, 11 insertions(+), 4 deletions(-) + +--- a/lib/vsprintf.c ++++ b/lib/vsprintf.c +@@ -983,8 +983,10 @@ char *symbol_string(char *buf, char *end + struct printf_spec spec, const char *fmt) + { + unsigned long value; +-#ifdef CONFIG_KALLSYMS + char sym[KSYM_SYMBOL_LEN]; ++#ifndef CONFIG_KALLSYMS ++ struct module *mod; ++ int len; + #endif + + if (fmt[1] == 'R') +@@ -1001,8 +1003,14 @@ char *symbol_string(char *buf, char *end + + return string_nocheck(buf, end, sym, spec); + #else +- return special_hex_number(buf, end, value, sizeof(void *)); ++ len = snprintf(sym, sizeof(sym), "0x%lx", value); ++ mod = __module_address(value); ++ if (mod) ++ snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]", ++ mod->name, mod->core_layout.base, ++ mod->core_layout.size); + #endif ++ return string(buf, end, sym, spec); + } + + static const struct printf_spec default_str_spec = { diff --git a/target/linux/generic/pending-5.15/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-5.15/240-remove-unsane-filenames-from-deps_initramfs-list.patch new file mode 100644 index 0000000000..29cfade716 --- /dev/null +++ b/target/linux/generic/pending-5.15/240-remove-unsane-filenames-from-deps_initramfs-list.patch @@ -0,0 +1,30 @@ +From: Gabor Juhos +Subject: usr: sanitize deps_initramfs list + +If any filename in the intramfs dependency +list contains a colon, that causes a kernel +build error like this: + +/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop. +make[5]: *** [usr] Error 2 + +Fix it by removing such filenames from the +deps_initramfs list. + +Signed-off-by: Gabor Juhos +Signed-off-by: Felix Fietkau +--- + usr/Makefile | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/usr/Makefile ++++ b/usr/Makefile +@@ -61,6 +61,8 @@ hostprogs := gen_init_cpio + # The dependency list is generated by gen_initramfs.sh -l + -include $(obj)/.initramfs_data.cpio.d + ++deps_initramfs := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v))) ++ + # do not try to update files included in initramfs + $(deps_initramfs): ; + diff --git a/target/linux/generic/pending-5.15/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-5.15/261-enable_wilink_platform_without_drivers.patch new file mode 100644 index 0000000000..cd31f9d934 --- /dev/null +++ b/target/linux/generic/pending-5.15/261-enable_wilink_platform_without_drivers.patch @@ -0,0 +1,20 @@ +From: Imre Kaloz +Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with + compat-wireless, too + +Signed-off-by: Imre Kaloz +--- + drivers/net/wireless/ti/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/wireless/ti/Kconfig ++++ b/drivers/net/wireless/ti/Kconfig +@@ -20,7 +20,7 @@ source "drivers/net/wireless/ti/wlcore/K + + config WILINK_PLATFORM_DATA + bool "TI WiLink platform data" +- depends on WLCORE_SDIO || WL1251_SDIO ++ depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS + default y + help + Small platform data bit needed to pass data to the sdio modules. diff --git a/target/linux/generic/pending-5.15/270-platform-mikrotik-build-bits.patch b/target/linux/generic/pending-5.15/270-platform-mikrotik-build-bits.patch new file mode 100644 index 0000000000..df738ef97b --- /dev/null +++ b/target/linux/generic/pending-5.15/270-platform-mikrotik-build-bits.patch @@ -0,0 +1,31 @@ +From c2deb5ef01a0ef09088832744cbace9e239a6ee0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= +Date: Sat, 28 Mar 2020 12:11:50 +0100 +Subject: [PATCH] generic: platform/mikrotik build bits (5.4) +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds platform/mikrotik kernel build bits + +Signed-off-by: Thibaut VARÈNE +--- + drivers/platform/Kconfig | 2 ++ + drivers/platform/Makefile | 1 + + 2 files changed, 3 insertions(+) + +--- a/drivers/platform/Kconfig ++++ b/drivers/platform/Kconfig +@@ -13,3 +13,5 @@ source "drivers/platform/chrome/Kconfig" + source "drivers/platform/mellanox/Kconfig" + + source "drivers/platform/olpc/Kconfig" ++ ++source "drivers/platform/mikrotik/Kconfig" +--- a/drivers/platform/Makefile ++++ b/drivers/platform/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_MIPS) += mips/ + obj-$(CONFIG_OLPC_EC) += olpc/ + obj-$(CONFIG_GOLDFISH) += goldfish/ + obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ ++obj-$(CONFIG_MIKROTIK) += mikrotik/ diff --git a/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch new file mode 100644 index 0000000000..706c5dee22 --- /dev/null +++ b/target/linux/generic/pending-5.15/300-mips_expose_boot_raw.patch @@ -0,0 +1,40 @@ +From: Mark Miller +Subject: mips: expose CONFIG_BOOT_RAW + +This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on +certain Broadcom chipsets running CFE in order to load the kernel. + +Signed-off-by: Mark Miller +Acked-by: Rob Landley +--- +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -1085,9 +1085,6 @@ config FW_ARC + config ARCH_MAY_HAVE_PC_FDC + bool + +-config BOOT_RAW +- bool +- + config CEVT_BCM1480 + bool + +@@ -3182,6 +3179,18 @@ choice + bool "Extend builtin kernel arguments with bootloader arguments" + endchoice + ++config BOOT_RAW ++ bool "Enable the kernel to be executed from the load address" ++ default n ++ help ++ Allow the kernel to be executed from the load address for ++ bootloaders which cannot read the ELF format. This places ++ a jump to start_kernel at the load address. ++ ++ If unsure, say N. ++ ++ ++ + endmenu + + config LOCKDEP_SUPPORT diff --git a/target/linux/generic/pending-5.15/302-mips_no_branch_likely.patch b/target/linux/generic/pending-5.15/302-mips_no_branch_likely.patch new file mode 100644 index 0000000000..271923fca8 --- /dev/null +++ b/target/linux/generic/pending-5.15/302-mips_no_branch_likely.patch @@ -0,0 +1,22 @@ +From: Felix Fietkau +Subject: mips: use -mno-branch-likely for kernel and userspace + +saves ~11k kernel size after lzma and ~12k squashfs size in the + +lede-commit: 41a039f46450ffae9483d6216422098669da2900 +Signed-off-by: Felix Fietkau +--- + arch/mips/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -95,7 +95,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin + # machines may also. Since BFD is incredibly buggy with respect to + # crossformat linking we rely on the elf2ecoff tool for format conversion. + # +-cflags-y += -G 0 -mno-abicalls -fno-pic -pipe ++cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely + cflags-y += -msoft-float + LDFLAGS_vmlinux += -G 0 -static -n -nostdlib + KBUILD_AFLAGS_MODULE += -mlong-calls diff --git a/target/linux/generic/pending-5.15/305-mips_module_reloc.patch b/target/linux/generic/pending-5.15/305-mips_module_reloc.patch new file mode 100644 index 0000000000..839ba24293 --- /dev/null +++ b/target/linux/generic/pending-5.15/305-mips_module_reloc.patch @@ -0,0 +1,371 @@ +From: Felix Fietkau +Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to + +lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c +Signed-off-by: Felix Fietkau +--- + arch/mips/Makefile | 5 + + arch/mips/include/asm/module.h | 5 + + arch/mips/kernel/module.c | 279 ++++++++++++++++++++++++++++++++++++++++- + 3 files changed, 284 insertions(+), 5 deletions(-) + +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -98,8 +98,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin + cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely + cflags-y += -msoft-float + LDFLAGS_vmlinux += -G 0 -static -n -nostdlib ++ifdef CONFIG_64BIT + KBUILD_AFLAGS_MODULE += -mlong-calls + KBUILD_CFLAGS_MODULE += -mlong-calls ++else ++ ifdef CONFIG_DYNAMIC_FTRACE ++ KBUILD_AFLAGS_MODULE += -mlong-calls ++ KBUILD_CFLAGS_MODULE += -mlong-calls ++ else ++ KBUILD_AFLAGS_MODULE += -mno-long-calls ++ KBUILD_CFLAGS_MODULE += -mno-long-calls ++ endif ++endif + + ifeq ($(CONFIG_RELOCATABLE),y) + LDFLAGS_vmlinux += --emit-relocs +--- a/arch/mips/include/asm/module.h ++++ b/arch/mips/include/asm/module.h +@@ -12,6 +12,11 @@ struct mod_arch_specific { + const struct exception_table_entry *dbe_start; + const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; ++ ++ void *phys_plt_tbl; ++ void *virt_plt_tbl; ++ unsigned int phys_plt_offset; ++ unsigned int virt_plt_offset; + }; + + typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ +--- a/arch/mips/kernel/module.c ++++ b/arch/mips/kernel/module.c +@@ -31,14 +31,221 @@ struct mips_hi16 { + static LIST_HEAD(dbe_list); + static DEFINE_SPINLOCK(dbe_lock); + +-#ifdef MODULE_START ++/* ++ * Get the potential max trampolines size required of the init and ++ * non-init sections. Only used if we cannot find enough contiguous ++ * physically mapped memory to put the module into. ++ */ ++static unsigned int ++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, ++ const char *secstrings, unsigned int symindex, bool is_init) ++{ ++ unsigned long ret = 0; ++ unsigned int i, j; ++ Elf_Sym *syms; ++ ++ /* Everything marked ALLOC (this includes the exported symbols) */ ++ for (i = 1; i < hdr->e_shnum; ++i) { ++ unsigned int info = sechdrs[i].sh_info; ++ ++ if (sechdrs[i].sh_type != SHT_REL ++ && sechdrs[i].sh_type != SHT_RELA) ++ continue; ++ ++ /* Not a valid relocation section? */ ++ if (info >= hdr->e_shnum) ++ continue; ++ ++ /* Don't bother with non-allocated sections */ ++ if (!(sechdrs[info].sh_flags & SHF_ALLOC)) ++ continue; ++ ++ /* If it's called *.init*, and we're not init, we're ++ not interested */ ++ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) ++ != is_init) ++ continue; ++ ++ syms = (Elf_Sym *) sechdrs[symindex].sh_addr; ++ if (sechdrs[i].sh_type == SHT_REL) { ++ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr; ++ unsigned int size = sechdrs[i].sh_size / sizeof(*rel); ++ ++ for (j = 0; j < size; ++j) { ++ Elf_Sym *sym; ++ ++ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26) ++ continue; ++ ++ sym = syms + ELF_MIPS_R_SYM(rel[j]); ++ if (!is_init && sym->st_shndx != SHN_UNDEF) ++ continue; ++ ++ ret += 4 * sizeof(int); ++ } ++ } else { ++ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr; ++ unsigned int size = sechdrs[i].sh_size / sizeof(*rela); ++ ++ for (j = 0; j < size; ++j) { ++ Elf_Sym *sym; ++ ++ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26) ++ continue; ++ ++ sym = syms + ELF_MIPS_R_SYM(rela[j]); ++ if (!is_init && sym->st_shndx != SHN_UNDEF) ++ continue; ++ ++ ret += 4 * sizeof(int); ++ } ++ } ++ } ++ ++ return ret; ++} ++ ++#ifndef MODULE_START ++static void *alloc_phys(unsigned long size) ++{ ++ unsigned order; ++ struct page *page; ++ struct page *p; ++ ++ size = PAGE_ALIGN(size); ++ order = get_order(size); ++ ++ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN | ++ __GFP_THISNODE, order); ++ if (!page) ++ return NULL; ++ ++ split_page(page, order); ++ ++ /* mark all pages except for the last one */ ++ for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p) ++ set_bit(PG_owner_priv_1, &p->flags); ++ ++ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p) ++ __free_page(p); ++ ++ return page_address(page); ++} ++#endif ++ ++static void free_phys(void *ptr) ++{ ++ struct page *page; ++ bool free; ++ ++ page = virt_to_page(ptr); ++ do { ++ free = test_and_clear_bit(PG_owner_priv_1, &page->flags); ++ __free_page(page); ++ page++; ++ } while (free); ++} ++ ++ + void *module_alloc(unsigned long size) + { ++#ifdef MODULE_START + return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END, + GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE, + __builtin_return_address(0)); ++#else ++ void *ptr; ++ ++ if (size == 0) ++ return NULL; ++ ++ ptr = alloc_phys(size); ++ ++ /* If we failed to allocate physically contiguous memory, ++ * fall back to regular vmalloc. The module loader code will ++ * create jump tables to handle long jumps */ ++ if (!ptr) ++ return vmalloc(size); ++ ++ return ptr; ++#endif + } ++ ++static inline bool is_phys_addr(void *ptr) ++{ ++#ifdef CONFIG_64BIT ++ return (KSEGX((unsigned long)ptr) == CKSEG0); ++#else ++ return (KSEGX(ptr) == KSEG0); + #endif ++} ++ ++/* Free memory returned from module_alloc */ ++void module_memfree(void *module_region) ++{ ++ if (is_phys_addr(module_region)) ++ free_phys(module_region); ++ else ++ vfree(module_region); ++} ++ ++static void *__module_alloc(int size, bool phys) ++{ ++ void *ptr; ++ ++ if (phys) ++ ptr = kmalloc(size, GFP_KERNEL); ++ else ++ ptr = vmalloc(size); ++ return ptr; ++} ++ ++static void __module_free(void *ptr) ++{ ++ if (is_phys_addr(ptr)) ++ kfree(ptr); ++ else ++ vfree(ptr); ++} ++ ++int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, ++ char *secstrings, struct module *mod) ++{ ++ unsigned int symindex = 0; ++ unsigned int core_size, init_size; ++ int i; ++ ++ mod->arch.phys_plt_offset = 0; ++ mod->arch.virt_plt_offset = 0; ++ mod->arch.phys_plt_tbl = NULL; ++ mod->arch.virt_plt_tbl = NULL; ++ ++ if (IS_ENABLED(CONFIG_64BIT)) ++ return 0; ++ ++ for (i = 1; i < hdr->e_shnum; i++) ++ if (sechdrs[i].sh_type == SHT_SYMTAB) ++ symindex = i; ++ ++ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false); ++ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true); ++ ++ if ((core_size + init_size) == 0) ++ return 0; ++ ++ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1); ++ if (!mod->arch.phys_plt_tbl) ++ return -ENOMEM; ++ ++ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0); ++ if (!mod->arch.virt_plt_tbl) { ++ __module_free(mod->arch.phys_plt_tbl); ++ mod->arch.phys_plt_tbl = NULL; ++ return -ENOMEM; ++ } ++ ++ return 0; ++} + + static int apply_r_mips_none(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +@@ -54,9 +261,40 @@ static int apply_r_mips_32(struct module + return 0; + } + ++static Elf_Addr add_plt_entry_to(unsigned *plt_offset, ++ void *start, Elf_Addr v) ++{ ++ unsigned *tramp = start + *plt_offset; ++ *plt_offset += 4 * sizeof(int); ++ ++ /* adjust carry for addiu */ ++ if (v & 0x00008000) ++ v += 0x10000; ++ ++ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */ ++ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */ ++ tramp[2] = 0x03200008; /* jr t9 */ ++ tramp[3] = 0x00000000; /* nop */ ++ ++ return (Elf_Addr) tramp; ++} ++ ++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v) ++{ ++ if (is_phys_addr(location)) ++ return add_plt_entry_to(&me->arch.phys_plt_offset, ++ me->arch.phys_plt_tbl, v); ++ else ++ return add_plt_entry_to(&me->arch.virt_plt_offset, ++ me->arch.virt_plt_tbl, v); ++ ++} ++ + static int apply_r_mips_26(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) + { ++ u32 ofs = base & 0x03ffffff; ++ + if (v % 4) { + pr_err("module %s: dangerous R_MIPS_26 relocation\n", + me->name); +@@ -64,13 +302,17 @@ static int apply_r_mips_26(struct module + } + + if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { +- pr_err("module %s: relocation overflow\n", +- me->name); +- return -ENOEXEC; ++ v = add_plt_entry(me, location, v + (ofs << 2)); ++ if (!v) { ++ pr_err("module %s: relocation overflow\n", ++ me->name); ++ return -ENOEXEC; ++ } ++ ofs = 0; + } + + *location = (*location & ~0x03ffffff) | +- ((base + (v >> 2)) & 0x03ffffff); ++ ((ofs + (v >> 2)) & 0x03ffffff); + + return 0; + } +@@ -446,9 +688,36 @@ int module_finalize(const Elf_Ehdr *hdr, + list_add(&me->arch.dbe_list, &dbe_list); + spin_unlock_irq(&dbe_lock); + } ++ ++ /* Get rid of the fixup trampoline if we're running the module ++ * from physically mapped address space */ ++ if (me->arch.phys_plt_offset == 0) { ++ __module_free(me->arch.phys_plt_tbl); ++ me->arch.phys_plt_tbl = NULL; ++ } ++ if (me->arch.virt_plt_offset == 0) { ++ __module_free(me->arch.virt_plt_tbl); ++ me->arch.virt_plt_tbl = NULL; ++ } ++ + return 0; + } + ++void module_arch_freeing_init(struct module *mod) ++{ ++ if (mod->state == MODULE_STATE_LIVE) ++ return; ++ ++ if (mod->arch.phys_plt_tbl) { ++ __module_free(mod->arch.phys_plt_tbl); ++ mod->arch.phys_plt_tbl = NULL; ++ } ++ if (mod->arch.virt_plt_tbl) { ++ __module_free(mod->arch.virt_plt_tbl); ++ mod->arch.virt_plt_tbl = NULL; ++ } ++} ++ + void module_arch_cleanup(struct module *mod) + { + spin_lock_irq(&dbe_lock); diff --git a/target/linux/generic/pending-5.15/307-mips_highmem_offset.patch b/target/linux/generic/pending-5.15/307-mips_highmem_offset.patch new file mode 100644 index 0000000000..e1ada22f34 --- /dev/null +++ b/target/linux/generic/pending-5.15/307-mips_highmem_offset.patch @@ -0,0 +1,19 @@ +From: Felix Fietkau +Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM + +Signed-off-by: Felix Fietkau +--- + arch/mips/include/asm/mach-generic/spaces.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/include/asm/mach-generic/spaces.h ++++ b/arch/mips/include/asm/mach-generic/spaces.h +@@ -54,7 +54,7 @@ + * Memory above this physical address will be considered highmem. + */ + #ifndef HIGHMEM_START +-#define HIGHMEM_START _AC(0x20000000, UL) ++#define HIGHMEM_START _AC(0x10000000, UL) + #endif + + #endif /* CONFIG_32BIT */ diff --git a/target/linux/generic/pending-5.15/308-mips32r2_tune.patch b/target/linux/generic/pending-5.15/308-mips32r2_tune.patch new file mode 100644 index 0000000000..bbea947382 --- /dev/null +++ b/target/linux/generic/pending-5.15/308-mips32r2_tune.patch @@ -0,0 +1,22 @@ +From: Felix Fietkau +Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2 + +This provides a good tradeoff across at least 24Kc-74Kc, while also +producing smaller code. + +Signed-off-by: Felix Fietkau +--- + arch/mips/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -174,7 +174,7 @@ cflags-$(CONFIG_CPU_VR41XX) += -march=r4 + cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap + cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap + cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap +-cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap ++cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -mtune=34kc -Wa,--trap + cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg + cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg + cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap diff --git a/target/linux/generic/pending-5.15/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-5.15/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch new file mode 100644 index 0000000000..794f027f18 --- /dev/null +++ b/target/linux/generic/pending-5.15/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch @@ -0,0 +1,140 @@ +From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 23 Dec 2018 18:06:53 +0100 +Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo + +Many MIPS CPUs have optional CPU features which are not activates for +all CPU cores. Print the CPU options which are implemented in the core +in /proc/cpuinfo. This makes it possible to see what features are +supported and which are not supported. This should cover all standard +MIPS extensions, before it only printed information about the main MIPS +ASEs. + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 116 insertions(+) + +--- a/arch/mips/kernel/proc.c ++++ b/arch/mips/kernel/proc.c +@@ -138,6 +138,120 @@ static int show_cpuinfo(struct seq_file + seq_printf(m, "micromips kernel\t: %s\n", + (read_c0_config3() & MIPS_CONF3_ISA_OE) ? "yes" : "no"); + } ++ ++ seq_printf(m, "Options implemented\t:"); ++ if (cpu_has_tlb) ++ seq_printf(m, "%s", " tlb"); ++ if (cpu_has_ftlb) ++ seq_printf(m, "%s", " ftlb"); ++ if (cpu_has_tlbinv) ++ seq_printf(m, "%s", " tlbinv"); ++ if (cpu_has_segments) ++ seq_printf(m, "%s", " segments"); ++ if (cpu_has_rixiex) ++ seq_printf(m, "%s", " rixiex"); ++ if (cpu_has_ldpte) ++ seq_printf(m, "%s", " ldpte"); ++ if (cpu_has_maar) ++ seq_printf(m, "%s", " maar"); ++ if (cpu_has_rw_llb) ++ seq_printf(m, "%s", " rw_llb"); ++ if (cpu_has_4kex) ++ seq_printf(m, "%s", " 4kex"); ++ if (cpu_has_3k_cache) ++ seq_printf(m, "%s", " 3k_cache"); ++ if (cpu_has_4k_cache) ++ seq_printf(m, "%s", " 4k_cache"); ++ if (cpu_has_6k_cache) ++ seq_printf(m, "%s", " 6k_cache"); ++ if (cpu_has_8k_cache) ++ seq_printf(m, "%s", " 8k_cache"); ++ if (cpu_has_tx39_cache) ++ seq_printf(m, "%s", " tx39_cache"); ++ if (cpu_has_octeon_cache) ++ seq_printf(m, "%s", " octeon_cache"); ++ if (cpu_has_fpu) ++ seq_printf(m, "%s", " fpu"); ++ if (cpu_has_32fpr) ++ seq_printf(m, "%s", " 32fpr"); ++ if (cpu_has_cache_cdex_p) ++ seq_printf(m, "%s", " cache_cdex_p"); ++ if (cpu_has_cache_cdex_s) ++ seq_printf(m, "%s", " cache_cdex_s"); ++ if (cpu_has_prefetch) ++ seq_printf(m, "%s", " prefetch"); ++ if (cpu_has_mcheck) ++ seq_printf(m, "%s", " mcheck"); ++ if (cpu_has_ejtag) ++ seq_printf(m, "%s", " ejtag"); ++ if (cpu_has_llsc) ++ seq_printf(m, "%s", " llsc"); ++ if (cpu_has_guestctl0ext) ++ seq_printf(m, "%s", " guestctl0ext"); ++ if (cpu_has_guestctl1) ++ seq_printf(m, "%s", " guestctl1"); ++ if (cpu_has_guestctl2) ++ seq_printf(m, "%s", " guestctl2"); ++ if (cpu_has_guestid) ++ seq_printf(m, "%s", " guestid"); ++ if (cpu_has_drg) ++ seq_printf(m, "%s", " drg"); ++ if (cpu_has_rixi) ++ seq_printf(m, "%s", " rixi"); ++ if (cpu_has_lpa) ++ seq_printf(m, "%s", " lpa"); ++ if (cpu_has_mvh) ++ seq_printf(m, "%s", " mvh"); ++ if (cpu_has_vtag_icache) ++ seq_printf(m, "%s", " vtag_icache"); ++ if (cpu_has_dc_aliases) ++ seq_printf(m, "%s", " dc_aliases"); ++ if (cpu_has_ic_fills_f_dc) ++ seq_printf(m, "%s", " ic_fills_f_dc"); ++ if (cpu_has_pindexed_dcache) ++ seq_printf(m, "%s", " pindexed_dcache"); ++ if (cpu_has_userlocal) ++ seq_printf(m, "%s", " userlocal"); ++ if (cpu_has_nofpuex) ++ seq_printf(m, "%s", " nofpuex"); ++ if (cpu_has_vint) ++ seq_printf(m, "%s", " vint"); ++ if (cpu_has_veic) ++ seq_printf(m, "%s", " veic"); ++ if (cpu_has_inclusive_pcaches) ++ seq_printf(m, "%s", " inclusive_pcaches"); ++ if (cpu_has_perf_cntr_intr_bit) ++ seq_printf(m, "%s", " perf_cntr_intr_bit"); ++ if (cpu_has_ufr) ++ seq_printf(m, "%s", " ufr"); ++ if (cpu_has_fre) ++ seq_printf(m, "%s", " fre"); ++ if (cpu_has_cdmm) ++ seq_printf(m, "%s", " cdmm"); ++ if (cpu_has_small_pages) ++ seq_printf(m, "%s", " small_pages"); ++ if (cpu_has_nan_legacy) ++ seq_printf(m, "%s", " nan_legacy"); ++ if (cpu_has_nan_2008) ++ seq_printf(m, "%s", " nan_2008"); ++ if (cpu_has_ebase_wg) ++ seq_printf(m, "%s", " ebase_wg"); ++ if (cpu_has_badinstr) ++ seq_printf(m, "%s", " badinstr"); ++ if (cpu_has_badinstrp) ++ seq_printf(m, "%s", " badinstrp"); ++ if (cpu_has_contextconfig) ++ seq_printf(m, "%s", " contextconfig"); ++ if (cpu_has_perf) ++ seq_printf(m, "%s", " perf"); ++ if (cpu_has_shared_ftlb_ram) ++ seq_printf(m, "%s", " shared_ftlb_ram"); ++ if (cpu_has_shared_ftlb_entries) ++ seq_printf(m, "%s", " shared_ftlb_entries"); ++ if (cpu_has_mipsmt_pertccounters) ++ seq_printf(m, "%s", " mipsmt_pertccounters"); ++ seq_printf(m, "\n"); ++ + seq_printf(m, "shadow register sets\t: %d\n", + cpu_data[n].srsets); + seq_printf(m, "kscratch registers\t: %d\n", diff --git a/target/linux/generic/pending-5.15/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-5.15/310-arm_module_unresolved_weak_sym.patch new file mode 100644 index 0000000000..191dc6ac3c --- /dev/null +++ b/target/linux/generic/pending-5.15/310-arm_module_unresolved_weak_sym.patch @@ -0,0 +1,22 @@ +From: Felix Fietkau +Subject: fix errors in unresolved weak symbols on arm + +lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f +Signed-off-by: Felix Fietkau +--- + arch/arm/kernel/module.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm/kernel/module.c ++++ b/arch/arm/kernel/module.c +@@ -105,6 +105,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons + return -ENOEXEC; + } + ++ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) && ++ ELF_ST_BIND(sym->st_info) == STB_WEAK) ++ continue; ++ + loc = dstsec->sh_addr + rel->r_offset; + + switch (ELF32_R_TYPE(rel->r_info)) { diff --git a/target/linux/generic/pending-5.15/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-5.15/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch new file mode 100644 index 0000000000..2808c95322 --- /dev/null +++ b/target/linux/generic/pending-5.15/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch @@ -0,0 +1,281 @@ +From: Yousong Zhou +Subject: MIPS: kexec: Accept command line parameters from userspace. + +Signed-off-by: Yousong Zhou +--- + arch/mips/kernel/machine_kexec.c | 153 +++++++++++++++++++++++++++++++----- + arch/mips/kernel/machine_kexec.h | 20 +++++ + arch/mips/kernel/relocate_kernel.S | 21 +++-- + 3 files changed, 167 insertions(+), 27 deletions(-) + create mode 100644 arch/mips/kernel/machine_kexec.h + +--- a/arch/mips/kernel/machine_kexec.c ++++ b/arch/mips/kernel/machine_kexec.c +@@ -9,14 +9,11 @@ + #include + #include + ++#include + #include + #include +- +-extern const unsigned char relocate_new_kernel[]; +-extern const size_t relocate_new_kernel_size; +- +-extern unsigned long kexec_start_address; +-extern unsigned long kexec_indirection_page; ++#include ++#include "machine_kexec.h" + + static unsigned long reboot_code_buffer; + +@@ -30,6 +27,101 @@ void (*_crash_smp_send_stop)(void) = NUL + void (*_machine_kexec_shutdown)(void) = NULL; + void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL; + ++static void machine_kexec_print_args(void) ++{ ++ unsigned long argc = (int)kexec_args[0]; ++ int i; ++ ++ pr_info("kexec_args[0] (argc): %lu\n", argc); ++ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]); ++ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]); ++ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]); ++ ++ for (i = 0; i < argc; i++) { ++ pr_info("kexec_argv[%d] = %p, %s\n", ++ i, kexec_argv[i], kexec_argv[i]); ++ } ++} ++ ++static void machine_kexec_init_argv(struct kimage *image) ++{ ++ void __user *buf = NULL; ++ size_t bufsz; ++ size_t size; ++ int i; ++ ++ bufsz = 0; ++ for (i = 0; i < image->nr_segments; i++) { ++ struct kexec_segment *seg; ++ ++ seg = &image->segment[i]; ++ if (seg->bufsz < 6) ++ continue; ++ ++ if (strncmp((char *) seg->buf, "kexec ", 6)) ++ continue; ++ ++ buf = seg->buf; ++ bufsz = seg->bufsz; ++ break; ++ } ++ ++ if (!buf) ++ return; ++ ++ size = KEXEC_COMMAND_LINE_SIZE; ++ size = min(size, bufsz); ++ if (size < bufsz) ++ pr_warn("kexec command line truncated to %zd bytes\n", size); ++ ++ /* Copy to kernel space */ ++ if (copy_from_user(kexec_argv_buf, buf, size)) ++ pr_warn("kexec command line copy to kernel space failed\n"); ++ ++ kexec_argv_buf[size - 1] = 0; ++} ++ ++static void machine_kexec_parse_argv(struct kimage *image) ++{ ++ char *reboot_code_buffer; ++ int reloc_delta; ++ char *ptr; ++ int argc; ++ int i; ++ ++ ptr = kexec_argv_buf; ++ argc = 0; ++ ++ /* ++ * convert command line string to array of parameters ++ * (as bootloader does). ++ */ ++ while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) { ++ if (*ptr == ' ') { ++ *ptr++ = '\0'; ++ continue; ++ } ++ ++ kexec_argv[argc++] = ptr; ++ ptr = strchr(ptr, ' '); ++ } ++ ++ if (!argc) ++ return; ++ ++ kexec_args[0] = argc; ++ kexec_args[1] = (unsigned long)kexec_argv; ++ kexec_args[2] = 0; ++ kexec_args[3] = 0; ++ ++ reboot_code_buffer = page_address(image->control_code_page); ++ reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel; ++ ++ kexec_args[1] += reloc_delta; ++ for (i = 0; i < argc; i++) ++ kexec_argv[i] += reloc_delta; ++} ++ + static void kexec_image_info(const struct kimage *kimage) + { + unsigned long i; +@@ -99,6 +191,18 @@ machine_kexec_prepare(struct kimage *kim + #endif + + kexec_image_info(kimage); ++ /* ++ * Whenever arguments passed from kexec-tools, Init the arguments as ++ * the original ones to try avoiding booting failure. ++ */ ++ ++ kexec_args[0] = fw_arg0; ++ kexec_args[1] = fw_arg1; ++ kexec_args[2] = fw_arg2; ++ kexec_args[3] = fw_arg3; ++ ++ machine_kexec_init_argv(kimage); ++ machine_kexec_parse_argv(kimage); + + if (_machine_kexec_prepare) + return _machine_kexec_prepare(kimage); +@@ -161,7 +265,7 @@ machine_crash_shutdown(struct pt_regs *r + void kexec_nonboot_cpu_jump(void) + { + local_flush_icache_range((unsigned long)relocated_kexec_smp_wait, +- reboot_code_buffer + relocate_new_kernel_size); ++ reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE); + + relocated_kexec_smp_wait(NULL); + } +@@ -199,7 +303,7 @@ void kexec_reboot(void) + * machine_kexec() CPU. + */ + local_flush_icache_range(reboot_code_buffer, +- reboot_code_buffer + relocate_new_kernel_size); ++ reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE); + + do_kexec = (void *)reboot_code_buffer; + do_kexec(); +@@ -212,10 +316,12 @@ machine_kexec(struct kimage *image) + unsigned long *ptr; + + reboot_code_buffer = +- (unsigned long)page_address(image->control_code_page); ++ (unsigned long)page_address(image->control_code_page); ++ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer); + + kexec_start_address = + (unsigned long) phys_to_virt(image->start); ++ pr_info("kexec_start_address = %p\n", (void *)kexec_start_address); + + if (image->type == KEXEC_TYPE_DEFAULT) { + kexec_indirection_page = +@@ -223,9 +329,19 @@ machine_kexec(struct kimage *image) + } else { + kexec_indirection_page = (unsigned long)&image->head; + } ++ pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page); + +- memcpy((void*)reboot_code_buffer, relocate_new_kernel, +- relocate_new_kernel_size); ++ pr_info("Where is memcpy: %p\n", memcpy); ++ pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n", ++ (void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end); ++ pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE, ++ (void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer); ++ memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel, ++ KEXEC_RELOCATE_NEW_KERNEL_SIZE); ++ ++ pr_info("Before _print_args().\n"); ++ machine_kexec_print_args(); ++ pr_info("Before eval loop.\n"); + + /* + * The generic kexec code builds a page list with physical +@@ -256,7 +372,7 @@ machine_kexec(struct kimage *image) + #ifdef CONFIG_SMP + /* All secondary cpus now may jump to kexec_wait cycle */ + relocated_kexec_smp_wait = reboot_code_buffer + +- (void *)(kexec_smp_wait - relocate_new_kernel); ++ (void *)(kexec_smp_wait - kexec_relocate_new_kernel); + smp_wmb(); + atomic_set(&kexec_ready_to_reboot, 1); + #endif +--- /dev/null ++++ b/arch/mips/kernel/machine_kexec.h +@@ -0,0 +1,20 @@ ++#ifndef _MACHINE_KEXEC_H ++#define _MACHINE_KEXEC_H ++ ++#ifndef __ASSEMBLY__ ++extern const unsigned char kexec_relocate_new_kernel[]; ++extern unsigned long kexec_relocate_new_kernel_end; ++extern unsigned long kexec_start_address; ++extern unsigned long kexec_indirection_page; ++ ++extern char kexec_argv_buf[]; ++extern char *kexec_argv[]; ++ ++#define KEXEC_RELOCATE_NEW_KERNEL_SIZE ((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel) ++#endif /* !__ASSEMBLY__ */ ++ ++#define KEXEC_COMMAND_LINE_SIZE 256 ++#define KEXEC_ARGV_SIZE (KEXEC_COMMAND_LINE_SIZE / 16) ++#define KEXEC_MAX_ARGC (KEXEC_ARGV_SIZE / sizeof(long)) ++ ++#endif +--- a/arch/mips/kernel/relocate_kernel.S ++++ b/arch/mips/kernel/relocate_kernel.S +@@ -10,8 +10,9 @@ + #include + #include + #include ++#include "machine_kexec.h" + +-LEAF(relocate_new_kernel) ++LEAF(kexec_relocate_new_kernel) + PTR_L a0, arg0 + PTR_L a1, arg1 + PTR_L a2, arg2 +@@ -96,7 +97,7 @@ done: + #endif + /* jump to kexec_start_address */ + j s1 +- END(relocate_new_kernel) ++ END(kexec_relocate_new_kernel) + + #ifdef CONFIG_SMP + /* +@@ -182,9 +183,15 @@ kexec_indirection_page: + PTR 0 + .size kexec_indirection_page, PTRSIZE + +-relocate_new_kernel_end: ++kexec_argv_buf: ++ EXPORT(kexec_argv_buf) ++ .skip KEXEC_COMMAND_LINE_SIZE ++ .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE ++ ++kexec_argv: ++ EXPORT(kexec_argv) ++ .skip KEXEC_ARGV_SIZE ++ .size kexec_argv, KEXEC_ARGV_SIZE + +-relocate_new_kernel_size: +- EXPORT(relocate_new_kernel_size) +- PTR relocate_new_kernel_end - relocate_new_kernel +- .size relocate_new_kernel_size, PTRSIZE ++kexec_relocate_new_kernel_end: ++ EXPORT(kexec_relocate_new_kernel_end) diff --git a/target/linux/generic/pending-5.15/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-5.15/332-arc-add-OWRTDTB-section.patch new file mode 100644 index 0000000000..30158cf399 --- /dev/null +++ b/target/linux/generic/pending-5.15/332-arc-add-OWRTDTB-section.patch @@ -0,0 +1,84 @@ +From bb0c3b0175240bf152fd7c644821a0cf9f77c37c Mon Sep 17 00:00:00 2001 +From: Evgeniy Didin +Date: Fri, 15 Mar 2019 18:53:38 +0300 +Subject: [PATCH] arc add OWRTDTB section + +This change allows OpenWRT to patch resulting kernel binary with +external .dtb. + +That allows us to re-use exactky the same vmlinux on different boards +given its ARC core configurations match (at least cache line sizes etc). + +""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external +.dtb right after it, keeping the string in place. + +Signed-off-by: Eugeniy Paltsev +Signed-off-by: Alexey Brodkin +Signed-off-by: Evgeniy Didin +--- + arch/arc/kernel/head.S | 10 ++++++++++ + arch/arc/kernel/setup.c | 4 +++- + arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++ + 3 files changed, 26 insertions(+), 1 deletion(-) + +--- a/arch/arc/kernel/head.S ++++ b/arch/arc/kernel/head.S +@@ -88,6 +88,16 @@ + DSP_EARLY_INIT + .endm + ++ ; Here "patch-dtb" will embed external .dtb ++ ; Note "patch-dtb" searches for ASCII "OWRTDTB:" string ++ ; and pastes .dtb right after it, hense the string precedes ++ ; __image_dtb symbol. ++ .section .owrt, "aw",@progbits ++ .ascii "OWRTDTB:" ++ENTRY(__image_dtb) ++ .fill 0x4000 ++END(__image_dtb) ++ + .section .init.text, "ax",@progbits + + ;---------------------------------------------------------------- +--- a/arch/arc/kernel/setup.c ++++ b/arch/arc/kernel/setup.c +@@ -495,6 +495,8 @@ static inline bool uboot_arg_invalid(uns + /* We always pass 0 as magic from U-boot */ + #define UBOOT_MAGIC_VALUE 0 + ++extern struct boot_param_header __image_dtb; ++ + void __init handle_uboot_args(void) + { + bool use_embedded_dtb = true; +@@ -533,7 +535,7 @@ void __init handle_uboot_args(void) + ignore_uboot_args: + + if (use_embedded_dtb) { +- machine_desc = setup_machine_fdt(__dtb_start); ++ machine_desc = setup_machine_fdt(&__image_dtb); + if (!machine_desc) + panic("Embedded DT invalid\n"); + } +--- a/arch/arc/kernel/vmlinux.lds.S ++++ b/arch/arc/kernel/vmlinux.lds.S +@@ -27,6 +27,19 @@ SECTIONS + + . = CONFIG_LINUX_LINK_BASE; + ++ /* ++ * In OpenWRT we want to patch built binary embedding .dtb of choice. ++ * This is implemented with "patch-dtb" utility which searches for ++ * "OWRTDTB:" string in first 16k of image and if it is found ++ * copies .dtb right after mentioned string. ++ * ++ * Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it. ++ */ ++ .owrt : { ++ *(.owrt) ++ . = ALIGN(PAGE_SIZE); ++ } ++ + _int_vec_base_lds = .; + .vector : { + *(.vector) diff --git a/target/linux/generic/pending-5.15/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-5.15/333-arc-enable-unaligned-access-in-kernel-mode.patch new file mode 100644 index 0000000000..1848a84cc4 --- /dev/null +++ b/target/linux/generic/pending-5.15/333-arc-enable-unaligned-access-in-kernel-mode.patch @@ -0,0 +1,24 @@ +From: Alexey Brodkin +Subject: arc: enable unaligned access in kernel mode + +This enables misaligned access handling even in kernel mode. +Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses +here and there and to cope with that without fixing stuff in the drivers +we're just gracefully handling it on ARC. + +Signed-off-by: Alexey Brodkin +--- + arch/arc/kernel/unaligned.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arc/kernel/unaligned.c ++++ b/arch/arc/kernel/unaligned.c +@@ -202,7 +202,7 @@ int misaligned_fixup(unsigned long addre + char buf[TASK_COMM_LEN]; + + /* handle user mode only and only if enabled by sysadmin */ +- if (!user_mode(regs) || !unaligned_enabled) ++ if (!unaligned_enabled) + return 1; + + if (no_unaligned_warning) { diff --git a/target/linux/generic/pending-5.15/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-5.15/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch new file mode 100644 index 0000000000..6792a66f8a --- /dev/null +++ b/target/linux/generic/pending-5.15/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch @@ -0,0 +1,25 @@ +From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Fri, 24 May 2019 17:56:19 +0200 +Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx + +Enable kernel XZ compression option on PPC_85xx. Tested with +simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor). + +Suggested-by: Christian Lamparter +Signed-off-by: Pawel Dembicki +--- + arch/powerpc/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/powerpc/Kconfig ++++ b/arch/powerpc/Kconfig +@@ -214,7 +214,7 @@ config PPC + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZMA if DEFAULT_UIMAGE + select HAVE_KERNEL_LZO if DEFAULT_UIMAGE +- select HAVE_KERNEL_XZ if PPC_BOOK3S || 44x ++ select HAVE_KERNEL_XZ if PPC_BOOK3S || 44x || PPC_85xx + select HAVE_KPROBES + select HAVE_KPROBES_ON_FTRACE + select HAVE_KRETPROBES diff --git a/target/linux/generic/pending-5.15/400-mtd-mtdsplit-support.patch b/target/linux/generic/pending-5.15/400-mtd-mtdsplit-support.patch new file mode 100644 index 0000000000..6f816a6ad3 --- /dev/null +++ b/target/linux/generic/pending-5.15/400-mtd-mtdsplit-support.patch @@ -0,0 +1,313 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -12,6 +12,25 @@ menuconfig MTD + + if MTD + ++menu "OpenWrt specific MTD options" ++ ++config MTD_ROOTFS_ROOT_DEV ++ bool "Automatically set 'rootfs' partition to be root filesystem" ++ default y ++ ++config MTD_SPLIT_FIRMWARE ++ bool "Automatically split firmware partition for kernel+rootfs" ++ default y ++ ++config MTD_SPLIT_FIRMWARE_NAME ++ string "Firmware partition name" ++ depends on MTD_SPLIT_FIRMWARE ++ default "firmware" ++ ++source "drivers/mtd/mtdsplit/Kconfig" ++ ++endmenu ++ + config MTD_TESTS + tristate "MTD tests support (DANGEROUS)" + depends on m +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -15,10 +15,12 @@ + #include + #include + #include ++#include + #include + #include + + #include "mtdcore.h" ++#include "mtdsplit/mtdsplit.h" + + /* + * MTD methods which simply translate the effective address and pass through +@@ -236,6 +238,146 @@ static int mtd_add_partition_attrs(struc + return ret; + } + ++static DEFINE_SPINLOCK(part_parser_lock); ++static LIST_HEAD(part_parsers); ++ ++static struct mtd_part_parser *mtd_part_parser_get(const char *name) ++{ ++ struct mtd_part_parser *p, *ret = NULL; ++ ++ spin_lock(&part_parser_lock); ++ ++ list_for_each_entry(p, &part_parsers, list) ++ if (!strcmp(p->name, name) && try_module_get(p->owner)) { ++ ret = p; ++ break; ++ } ++ ++ spin_unlock(&part_parser_lock); ++ ++ return ret; ++} ++ ++static inline void mtd_part_parser_put(const struct mtd_part_parser *p) ++{ ++ module_put(p->owner); ++} ++ ++static struct mtd_part_parser * ++get_partition_parser_by_type(enum mtd_parser_type type, ++ struct mtd_part_parser *start) ++{ ++ struct mtd_part_parser *p, *ret = NULL; ++ ++ spin_lock(&part_parser_lock); ++ ++ p = list_prepare_entry(start, &part_parsers, list); ++ if (start) ++ mtd_part_parser_put(start); ++ ++ list_for_each_entry_continue(p, &part_parsers, list) { ++ if (p->type == type && try_module_get(p->owner)) { ++ ret = p; ++ break; ++ } ++ } ++ ++ spin_unlock(&part_parser_lock); ++ ++ return ret; ++} ++ ++static int parse_mtd_partitions_by_type(struct mtd_info *master, ++ enum mtd_parser_type type, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct mtd_part_parser *prev = NULL; ++ int ret = 0; ++ ++ while (1) { ++ struct mtd_part_parser *parser; ++ ++ parser = get_partition_parser_by_type(type, prev); ++ if (!parser) ++ break; ++ ++ ret = (*parser->parse_fn)(master, pparts, data); ++ ++ if (ret > 0) { ++ mtd_part_parser_put(parser); ++ printk(KERN_NOTICE ++ "%d %s partitions found on MTD device %s\n", ++ ret, parser->name, master->name); ++ break; ++ } ++ ++ prev = parser; ++ } ++ ++ return ret; ++} ++ ++static int ++run_parsers_by_type(struct mtd_info *child, enum mtd_parser_type type) ++{ ++ struct mtd_partition *parts; ++ int nr_parts; ++ int i; ++ ++ nr_parts = parse_mtd_partitions_by_type(child, type, (const struct mtd_partition **)&parts, ++ NULL); ++ if (nr_parts <= 0) ++ return nr_parts; ++ ++ if (WARN_ON(!parts)) ++ return 0; ++ ++ for (i = 0; i < nr_parts; i++) { ++ /* adjust partition offsets */ ++ parts[i].offset += child->part.offset; ++ ++ mtd_add_partition(child->parent, ++ parts[i].name, ++ parts[i].offset, ++ parts[i].size); ++ } ++ ++ kfree(parts); ++ ++ return nr_parts; ++} ++ ++#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME ++#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME ++#else ++#define SPLIT_FIRMWARE_NAME "unused" ++#endif ++ ++static void split_firmware(struct mtd_info *master, struct mtd_info *part) ++{ ++ run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE); ++} ++ ++static void mtd_partition_split(struct mtd_info *master, struct mtd_info *part) ++{ ++ static int rootfs_found = 0; ++ ++ if (rootfs_found) ++ return; ++ ++ if (!strcmp(part->name, "rootfs")) { ++ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS); ++ ++ rootfs_found = 1; ++ } ++ ++ if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) && ++ !strcmp(part->name, SPLIT_FIRMWARE_NAME) && ++ !of_find_property(mtd_get_of_node(part), "compatible", NULL)) ++ split_firmware(master, part); ++} ++ + int mtd_add_partition(struct mtd_info *parent, const char *name, + long long offset, long long length) + { +@@ -274,6 +416,7 @@ int mtd_add_partition(struct mtd_info *p + if (ret) + goto err_remove_part; + ++ mtd_partition_split(parent, child); + mtd_add_partition_attrs(child); + + return 0; +@@ -422,6 +565,7 @@ int add_mtd_partitions(struct mtd_info * + goto err_del_partitions; + } + ++ mtd_partition_split(master, child); + mtd_add_partition_attrs(child); + + /* Look for subpartitions */ +@@ -438,31 +582,6 @@ err_del_partitions: + return ret; + } + +-static DEFINE_SPINLOCK(part_parser_lock); +-static LIST_HEAD(part_parsers); +- +-static struct mtd_part_parser *mtd_part_parser_get(const char *name) +-{ +- struct mtd_part_parser *p, *ret = NULL; +- +- spin_lock(&part_parser_lock); +- +- list_for_each_entry(p, &part_parsers, list) +- if (!strcmp(p->name, name) && try_module_get(p->owner)) { +- ret = p; +- break; +- } +- +- spin_unlock(&part_parser_lock); +- +- return ret; +-} +- +-static inline void mtd_part_parser_put(const struct mtd_part_parser *p) +-{ +- module_put(p->owner); +-} +- + /* + * Many partition parsers just expected the core to kfree() all their data in + * one chunk. Do that by default. +--- a/include/linux/mtd/partitions.h ++++ b/include/linux/mtd/partitions.h +@@ -75,6 +75,12 @@ struct mtd_part_parser_data { + * Functions dealing with the various ways of partitioning the space + */ + ++enum mtd_parser_type { ++ MTD_PARSER_TYPE_DEVICE = 0, ++ MTD_PARSER_TYPE_ROOTFS, ++ MTD_PARSER_TYPE_FIRMWARE, ++}; ++ + struct mtd_part_parser { + struct list_head list; + struct module *owner; +@@ -83,6 +89,7 @@ struct mtd_part_parser { + int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, + struct mtd_part_parser_data *); + void (*cleanup)(const struct mtd_partition *pparts, int nr_parts); ++ enum mtd_parser_type type; + }; + + /* Container for passing around a set of parsed partitions */ +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -9,6 +9,8 @@ mtd-y := mtdcore.o mtdsuper.o mtdconc + + obj-y += parsers/ + ++obj-$(CONFIG_MTD_SPLIT) += mtdsplit/ ++ + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o + obj-$(CONFIG_MTD_BLOCK) += mtdblock.o +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -608,6 +608,24 @@ static inline void mtd_align_erase_req(s + req->len += mtd->erasesize - mod; + } + ++static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd) ++{ ++ if (mtd_mod_by_eb(sz, mtd) == 0) ++ return sz; ++ ++ /* Round up to next erase block */ ++ return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize; ++} ++ ++static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd) ++{ ++ if (mtd_mod_by_eb(sz, mtd) == 0) ++ return sz; ++ ++ /* Round down to the start of the current erase block */ ++ return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize; ++} ++ + static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) + { + if (mtd->writesize_shift) +@@ -680,6 +698,13 @@ extern void __put_mtd_device(struct mtd_ + extern struct mtd_info *get_mtd_device_nm(const char *name); + extern void put_mtd_device(struct mtd_info *mtd); + ++static inline uint64_t mtdpart_get_offset(const struct mtd_info *mtd) ++{ ++ if (!mtd_is_partition(mtd)) ++ return 0; ++ ++ return mtd->part.offset; ++} + + struct mtd_notifier { + void (*add)(struct mtd_info *mtd); diff --git a/target/linux/generic/pending-5.15/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch b/target/linux/generic/pending-5.15/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch new file mode 100644 index 0000000000..eaf96e9534 --- /dev/null +++ b/target/linux/generic/pending-5.15/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch @@ -0,0 +1,389 @@ +From patchwork Tue Jun 8 04:07:19 2021 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: John Thomson +X-Patchwork-Id: 1489105 +X-Patchwork-Delegate: tudor.ambarus@gmail.com +Return-Path: + +X-Original-To: incoming@patchwork.ozlabs.org +Delivered-To: patchwork-incoming@bilbo.ozlabs.org +Authentication-Results: ozlabs.org; + spf=none (no SPF record) smtp.mailfrom=lists.infradead.org + (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; + envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; + receiver=) +Authentication-Results: ozlabs.org; + dkim=pass (2048-bit key; + secure) header.d=lists.infradead.org header.i=@lists.infradead.org + header.a=rsa-sha256 header.s=bombadil.20210309 header.b=EMabhVoR; + dkim=fail reason="signature verification failed" (2048-bit key; + unprotected) header.d=fastmail.com.au header.i=@fastmail.com.au + header.a=rsa-sha256 header.s=fm3 header.b=dLzuZ6dB; + dkim=fail reason="signature verification failed" (2048-bit key; + unprotected) header.d=messagingengine.com header.i=@messagingengine.com + header.a=rsa-sha256 header.s=fm3 header.b=nSRGsW+C; + dkim-atps=neutral +Received: from bombadil.infradead.org (bombadil.infradead.org + [IPv6:2607:7c80:54:e::133]) + (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) + key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest + SHA256) + (No client certificate requested) + by ozlabs.org (Postfix) with ESMTPS id 4FzcFN1j1nz9sW8 + for ; Tue, 8 Jun 2021 14:09:28 +1000 (AEST) +DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; + d=lists.infradead.org; s=bombadil.20210309; h=Sender: + Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: + List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:Cc + :To:From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: + Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: + List-Owner; bh=6mUWQd71FwsINycGYY1qOhKz+ecWJVNtwDkTebG3XkA=; b=EMabhVoRE3ad89 + o3L2AgyKrs+blSofUC3hoSsQe7gi3m4si8S9HW8Z+8SsS5TufUsvGwDl80qSYGlQOytQF+1yRUWvE + 6FJ/+bqv+TwjqZFibgJ6+9OVsQN9dZ/no1R0bBXIpmrf8ORUmv58QK4ZQquaFKbyXKpFeWOC2MSv4 + H2MAhyhTU8a3gtooH6G8+KvsJEfVgh6C+aDbwxyh2UY3chHKuw1kvL6AktbfUE2xl4zxi3x3kc70B + Wi3LiJBFokxVdgnROXxTU5tI0XboWYkQV64gLuQNV4XKClcuhVpzloDK8Iok6NTd7b32a7TdEFlCS + lGKsEKmxtUlW2FpfoduA==; +Received: from localhost ([::1] helo=bombadil.infradead.org) + by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) + id 1lqT1r-006OAW-DX; Tue, 08 Jun 2021 04:07:51 +0000 +Received: from new1-smtp.messagingengine.com ([66.111.4.221]) + by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) + id 1lqT1l-006O9b-Fq + for linux-mtd@lists.infradead.org; Tue, 08 Jun 2021 04:07:50 +0000 +Received: from compute2.internal (compute2.nyi.internal [10.202.2.42]) + by mailnew.nyi.internal (Postfix) with ESMTP id 4456B580622; + Tue, 8 Jun 2021 00:07:42 -0400 (EDT) +Received: from mailfrontend2 ([10.202.2.163]) + by compute2.internal (MEProxy); Tue, 08 Jun 2021 00:07:42 -0400 +DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=fastmail.com.au; + h=from:to:cc:subject:date:message-id:mime-version + :content-transfer-encoding; s=fm3; bh=ZXRH+YluM1mHCS1EWUiCY/Sg8O + LccfHe1oW5iAay6y8=; b=dLzuZ6dBYf7ZA8tWLOBFZYLi7ERsGe/4vnMXG+ovvb + dNBO0+SaFGwoqYSFrfq/TeyHfKyvxrA7+LCdopIuT4abpLHxtRwtRiafQcDYCPat + qJIqOZO+wCZC5S9Jc1OP7+t1FviGpgevqIMotci37P+RWc5u3AweMzFljZk90E8C + uorV6rXagD+OssJQzllRnAIK88+rOAC9ZyXv2gWxy4d1HSCwSWgzx2vnV9CNp918 + YC/3tiHas9krbrPIaAsdBROr7Bvoe/ShRRzruKRuvZVgg5NN90vX+/5ZjI8u04GM + p2bWCbC62CP6wlcgDaz+c/Sgr5ITd2GPENJsHfqmLRBA== +DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= + messagingengine.com; h=cc:content-transfer-encoding:date:from + :message-id:mime-version:subject:to:x-me-proxy:x-me-proxy + :x-me-sender:x-me-sender:x-sasl-enc; s=fm3; bh=ZXRH+YluM1mHCS1EW + UiCY/Sg8OLccfHe1oW5iAay6y8=; b=nSRGsW+CQ2Zx1RVpIUu8W/VD/k5P+32BW + 5k2ltd+UhI3dfldBPzHrYiOP/IJqGkNW+V+rHASacW/vFygnaZoxNjRYKnOsu+26 + wb2yK3jpl6lsNTg3N1Z4XJrYY2lf9H29DMFbhC67l0PTc050rcZk4XsKTLAlv14Q + VA4WREYSaX/4IN4O+ES4TMq0a/3gKZh6nvbbJXbsXfK0WlSHTGZtZmW3fyrqvbXa + t+R7L8vvqWvwls0pV+Sn8LeQqb7+A69w0UOnuznjkcA3sCc2YehcHbxcUEnMH+9N + bxOjmIDeg9/4X/829tUWUJiLhE5SFmQZ1P6oFtmbWoLrDz0ZJIVBw== +X-ME-Sender: + +X-ME-Received: + +X-ME-Proxy-Cause: + gggruggvucftvghtrhhoucdtuddrgeduledrfedtkedgjeduucetufdoteggodetrfdotf + fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen + uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne + cujfgurhephffvufffkffoggfgsedtkeertdertddtnecuhfhrohhmpeflohhhnhcuvfhh + ohhmshhonhcuoehgihhtsehjohhhnhhthhhomhhsohhnrdhfrghsthhmrghilhdrtghomh + drrghuqeenucggtffrrghtthgvrhhnpefffeeihfdukedtuedufeetieeuudfhhefhkefh + tefgtdeuffekffelleetveduieenucevlhhushhtvghrufhiiigvpedtnecurfgrrhgrmh + epmhgrihhlfhhrohhmpehgihhtsehjohhhnhhthhhomhhsohhnrdhfrghsthhmrghilhdr + tghomhdrrghu +X-ME-Proxy: + + + +Received: by mail.messagingengine.com (Postfix) with ESMTPA; Tue, + 8 Jun 2021 00:07:35 -0400 (EDT) +From: John Thomson +To: Miquel Raynal , + Richard Weinberger , Vignesh Raghavendra , + Tudor Ambarus , + Michael Walle , Pratyush Yadav , + linux-mtd@lists.infradead.org +Cc: linux-kernel@vger.kernel.org, + John Thomson , + kernel test robot , Dan Carpenter +Subject: [PATCH] mtd: spi-nor: write support for minor aligned partitions +Date: Tue, 8 Jun 2021 14:07:19 +1000 +Message-Id: <20210608040719.14431-1-git@johnthomson.fastmail.com.au> +X-Mailer: git-send-email 2.31.1 +MIME-Version: 1.0 +X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 +X-CRM114-CacheID: sfid-20210607_210745_712053_67A7D864 +X-CRM114-Status: GOOD ( 26.99 ) +X-Spam-Score: -0.8 (/) +X-Spam-Report: Spam detection software, + running on the system "bombadil.infradead.org", + has NOT identified this incoming email as spam. The original + message has been attached to this so you can view it or label + similar future email. If you have any questions, see + the administrator of that system for details. + Content preview: Do not prevent writing to mtd partitions where a partition + boundary sits on a minor erasesize boundary. This addresses a FIXME that + has been present since the start of the linux git history: /* Doesn' [...] + Content analysis details: (-0.8 points, 5.0 required) + pts rule name description + ---- ---------------------- + -------------------------------------------------- + -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at https://www.dnswl.org/, + low trust [66.111.4.221 listed in list.dnswl.org] + -0.0 SPF_PASS SPF: sender matches SPF record + -0.0 SPF_HELO_PASS SPF: HELO matches SPF record + 0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) + [66.111.4.221 listed in wl.mailspike.net] + -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature + 0.1 DKIM_SIGNED Message has a DKIM or DK signature, + not necessarily + valid + -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from + envelope-from domain + 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders +X-BeenThere: linux-mtd@lists.infradead.org +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: Linux MTD discussion mailing list +List-Unsubscribe: , + +List-Archive: +List-Post: +List-Help: +List-Subscribe: , + +Sender: "linux-mtd" +Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org + +Do not prevent writing to mtd partitions where a partition boundary sits +on a minor erasesize boundary. +This addresses a FIXME that has been present since the start of the +linux git history: +/* Doesn't start on a boundary of major erase size */ +/* FIXME: Let it be writable if it is on a boundary of + * _minor_ erase size though */ + +Allow a uniform erase region spi-nor device to be configured +to use the non-uniform erase regions code path for an erase with: +CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y + +On supporting hardware (SECT_4K: majority of current SPI-NOR device) +provide the facility for an erase to use the least number +of SPI-NOR operations, as well as access to 4K erase without +requiring CONFIG_MTD_SPI_NOR_USE_4K_SECTORS + +Introduce erasesize_minor to the mtd struct, +the smallest erasesize supported by the device + +On existing devices, this is useful where write support is wanted +for data on a 4K partition, such as some u-boot-env partitions, +or RouterBoot soft_config, while still netting the performance +benefits of using 64K sectors + +Performance: +time mtd erase firmware +OpenWrt 5.10 ramips MT7621 w25q128jv 0xfc0000 partition length + +Without this patch +MTD_SPI_NOR_USE_4K_SECTORS=y |n +real 2m 11.66s |0m 50.86s +user 0m 0.00s |0m 0.00s +sys 1m 56.20s |0m 50.80s + +With this patch +MTD_SPI_NOR_USE_VARIABLE_ERASE=n|y |4K_SECTORS=y +real 0m 51.68s |0m 50.85s |2m 12.89s +user 0m 0.00s |0m 0.00s |0m 0.01s +sys 0m 46.94s |0m 50.38s |2m 12.46s + +Signed-off-by: John Thomson +--- +Have not tested on variable erase regions device. + +checkpatch does not like the printk(KERN_WARNING +these should be changed separately beforehand? + +Changes RFC -> v1: +Fix uninitialized variable smatch warning +Reported-by: kernel test robot +Reported-by: Dan Carpenter +--- + drivers/mtd/mtdpart.c | 52 ++++++++++++++++++++++++++++--------- + drivers/mtd/spi-nor/Kconfig | 10 +++++++ + drivers/mtd/spi-nor/core.c | 10 +++++-- + include/linux/mtd/mtd.h | 2 ++ + 4 files changed, 60 insertions(+), 14 deletions(-) + +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -40,10 +40,11 @@ static struct mtd_info *allocate_partiti + struct mtd_info *master = mtd_get_master(parent); + int wr_alignment = (parent->flags & MTD_NO_ERASE) ? + master->writesize : master->erasesize; ++ int wr_alignment_minor = 0; + u64 parent_size = mtd_is_partition(parent) ? + parent->part.size : parent->size; + struct mtd_info *child; +- u32 remainder; ++ u32 remainder, remainder_minor; + char *name; + u64 tmp; + +@@ -145,6 +146,7 @@ static struct mtd_info *allocate_partiti + int i, max = parent->numeraseregions; + u64 end = child->part.offset + child->part.size; + struct mtd_erase_region_info *regions = parent->eraseregions; ++ uint32_t erasesize_minor = child->erasesize; + + /* Find the first erase regions which is part of this + * partition. */ +@@ -155,15 +157,24 @@ static struct mtd_info *allocate_partiti + if (i > 0) + i--; + +- /* Pick biggest erasesize */ + for (; i < max && regions[i].offset < end; i++) { ++ /* Pick biggest erasesize */ + if (child->erasesize < regions[i].erasesize) + child->erasesize = regions[i].erasesize; ++ /* Pick smallest non-zero erasesize */ ++ if ((erasesize_minor > regions[i].erasesize) && (regions[i].erasesize > 0)) ++ erasesize_minor = regions[i].erasesize; + } ++ ++ if (erasesize_minor < child->erasesize) ++ child->erasesize_minor = erasesize_minor; ++ + BUG_ON(child->erasesize == 0); + } else { + /* Single erase size */ + child->erasesize = master->erasesize; ++ if (master->erasesize_minor) ++ child->erasesize_minor = master->erasesize_minor; + } + + /* +@@ -171,26 +182,43 @@ static struct mtd_info *allocate_partiti + * exposes several regions with different erasesize. Adjust + * wr_alignment accordingly. + */ +- if (!(child->flags & MTD_NO_ERASE)) ++ if (!(child->flags & MTD_NO_ERASE)) { + wr_alignment = child->erasesize; ++ if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE) && child->erasesize_minor) ++ wr_alignment_minor = child->erasesize_minor; ++ } + + tmp = mtd_get_master_ofs(child, 0); + remainder = do_div(tmp, wr_alignment); + if ((child->flags & MTD_WRITEABLE) && remainder) { +- /* Doesn't start on a boundary of major erase size */ +- /* FIXME: Let it be writable if it is on a boundary of +- * _minor_ erase size though */ +- child->flags &= ~MTD_WRITEABLE; +- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n", +- part->name); ++ if (wr_alignment_minor) { ++ tmp = mtd_get_master_ofs(child, 0); ++ remainder_minor = do_div(tmp, wr_alignment_minor); ++ if (remainder_minor == 0) ++ child->erasesize = child->erasesize_minor; ++ } ++ ++ if ((!wr_alignment_minor) || (wr_alignment_minor && remainder_minor != 0)) { ++ child->flags &= ~MTD_WRITEABLE; ++ printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n", ++ part->name); ++ } + } + + tmp = mtd_get_master_ofs(child, 0) + child->part.size; + remainder = do_div(tmp, wr_alignment); + if ((child->flags & MTD_WRITEABLE) && remainder) { +- child->flags &= ~MTD_WRITEABLE; +- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n", +- part->name); ++ if (wr_alignment_minor) { ++ tmp = mtd_get_master_ofs(child, 0) + child->part.size; ++ remainder_minor = do_div(tmp, wr_alignment_minor); ++ if (remainder_minor == 0) ++ child->erasesize = child->erasesize_minor; ++ } ++ if ((!wr_alignment_minor) || (wr_alignment_minor && remainder_minor != 0)) { ++ child->flags &= ~MTD_WRITEABLE; ++ printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n", ++ part->name); ++ } + } + + child->size = child->part.size; +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -10,6 +10,16 @@ menuconfig MTD_SPI_NOR + + if MTD_SPI_NOR + ++config MTD_SPI_NOR_USE_VARIABLE_ERASE ++ bool "Disable uniform_erase to allow use of all hardware supported erasesizes" ++ depends on !MTD_SPI_NOR_USE_4K_SECTORS ++ default n ++ help ++ Allow mixed use of all hardware supported erasesizes, ++ by forcing spi_nor to use the multiple eraseregions code path. ++ For example: A 68K erase will use one 64K erase, and one 4K erase ++ on supporting hardware. ++ + config MTD_SPI_NOR_USE_4K_SECTORS + bool "Use small 4096 B erase sectors" + default y +--- a/drivers/mtd/spi-nor/core.c ++++ b/drivers/mtd/spi-nor/core.c +@@ -1075,6 +1075,8 @@ static u8 spi_nor_convert_3to4_erase(u8 + + static bool spi_nor_has_uniform_erase(const struct spi_nor *nor) + { ++ if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE)) ++ return false; + return !!nor->params->erase_map.uniform_erase_type; + } + +@@ -2560,6 +2562,7 @@ static int spi_nor_select_erase(struct s + { + struct spi_nor_erase_map *map = &nor->params->erase_map; + const struct spi_nor_erase_type *erase = NULL; ++ const struct spi_nor_erase_type *erase_minor = NULL; + struct mtd_info *mtd = &nor->mtd; + u32 wanted_size = nor->info->sector_size; + int i; +@@ -2592,8 +2595,9 @@ static int spi_nor_select_erase(struct s + */ + for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) { + if (map->erase_type[i].size) { +- erase = &map->erase_type[i]; +- break; ++ if (!erase) ++ erase = &map->erase_type[i]; ++ erase_minor = &map->erase_type[i]; + } + } + +@@ -2601,6 +2605,8 @@ static int spi_nor_select_erase(struct s + return -EINVAL; + + mtd->erasesize = erase->size; ++ if (erase_minor && erase_minor->size < erase->size) ++ mtd->erasesize_minor = erase_minor->size; + return 0; + } + +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -242,6 +242,8 @@ struct mtd_info { + * information below if they desire + */ + uint32_t erasesize; ++ /* "Minor" (smallest) erase size supported by the whole device */ ++ uint32_t erasesize_minor; + /* Minimal writable flash unit size. In case of NOR flash it is 1 (even + * though individual bits can be cleared), in case of NAND flash it is + * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR diff --git a/target/linux/generic/pending-5.15/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch b/target/linux/generic/pending-5.15/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch new file mode 100644 index 0000000000..353fa96748 --- /dev/null +++ b/target/linux/generic/pending-5.15/410-mtd-parsers-ofpart-fix-parsing-subpartitions.patch @@ -0,0 +1,76 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 6 May 2021 12:33:58 +0200 +Subject: [PATCH] mtd: parsers: ofpart: fix parsing subpartitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +ofpart was recently patched to not scan random partition nodes as +subpartitions. That change unfortunately broke scanning valid +subpartitions like: + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "fixed-partitions"; + label = "bootloader"; + reg = <0x0 0x100000>; + + partition@0 { + label = "config"; + reg = <0x80000 0x80000>; + }; + }; +}; + +Fix that regression by adding 1 more code path. We actually need 3 +conditional blocks to support 3 possible cases. This change also makes +code easier to understand & follow. + +Reported-by: David Bauer +Fixes: 2d751203aacf ("mtd: parsers: ofpart: limit parsing of deprecated DT syntax +Signed-off-by: Rafał Miłecki +--- + drivers/mtd/parsers/ofpart_core.c | 26 ++++++++++++++------------ + 1 file changed, 14 insertions(+), 12 deletions(-) + +--- a/drivers/mtd/parsers/ofpart_core.c ++++ b/drivers/mtd/parsers/ofpart_core.c +@@ -57,20 +57,22 @@ static int parse_fixed_partitions(struct + if (!mtd_node) + return 0; + +- ofpart_node = of_get_child_by_name(mtd_node, "partitions"); +- if (!ofpart_node && !master->parent) { +- /* +- * We might get here even when ofpart isn't used at all (e.g., +- * when using another parser), so don't be louder than +- * KERN_DEBUG +- */ +- pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n", +- master->name, mtd_node); ++ if (!master->parent) { /* Master */ ++ ofpart_node = of_get_child_by_name(mtd_node, "partitions"); ++ if (!ofpart_node) { ++ /* ++ * We might get here even when ofpart isn't used at all (e.g., ++ * when using another parser), so don't be louder than ++ * KERN_DEBUG ++ */ ++ pr_debug("%s: 'partitions' subnode not found on %pOF. Trying to parse direct subnodes as partitions.\n", ++ master->name, mtd_node); ++ ofpart_node = mtd_node; ++ dedicated = false; ++ } ++ } else { /* Partition */ + ofpart_node = mtd_node; +- dedicated = false; + } +- if (!ofpart_node) +- return 0; + + of_id = of_match_node(parse_ofpart_match_table, ofpart_node); + if (dedicated && !of_id) { diff --git a/target/linux/generic/pending-5.15/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-5.15/419-mtd-redboot-add-of_match_table-with-DT-binding.patch new file mode 100644 index 0000000000..7692f484ae --- /dev/null +++ b/target/linux/generic/pending-5.15/419-mtd-redboot-add-of_match_table-with-DT-binding.patch @@ -0,0 +1,22 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH] mtd: redboot: add of_match_table with DT binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows parsing RedBoot compatible partitions for properly described +flash device in DT. + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/mtd/parsers/redboot.c ++++ b/drivers/mtd/parsers/redboot.c +@@ -305,6 +305,7 @@ static int parse_redboot_partitions(stru + + static const struct of_device_id mtd_parser_redboot_of_match_table[] = { + { .compatible = "redboot-fis" }, ++ { .compatible = "ecoscentric,redboot-fis-partitions" }, + {}, + }; + MODULE_DEVICE_TABLE(of, mtd_parser_redboot_of_match_table); diff --git a/target/linux/generic/pending-5.15/420-mtd-redboot_space.patch b/target/linux/generic/pending-5.15/420-mtd-redboot_space.patch new file mode 100644 index 0000000000..a3cd4ecf1f --- /dev/null +++ b/target/linux/generic/pending-5.15/420-mtd-redboot_space.patch @@ -0,0 +1,41 @@ +From: Felix Fietkau +Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable) + +[john@phrozen.org: used by ixp and others] + +lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00 +Signed-off-by: Felix Fietkau +--- + drivers/mtd/redboot.c | 19 +++++++++++++------ + 1 file changed, 13 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/parsers/redboot.c ++++ b/drivers/mtd/parsers/redboot.c +@@ -279,14 +279,21 @@ static int parse_redboot_partitions(stru + #endif + names += strlen(names)+1; + +-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED + if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) { +- i++; +- parts[i].offset = parts[i-1].size + parts[i-1].offset; +- parts[i].size = fl->next->img->flash_base - parts[i].offset; +- parts[i].name = nullname; +- } ++ if (!strcmp(parts[i].name, "rootfs")) { ++ parts[i].size = fl->next->img->flash_base; ++ parts[i].size &= ~(master->erasesize - 1); ++ parts[i].size -= parts[i].offset; ++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED ++ nrparts--; ++ } else { ++ i++; ++ parts[i].offset = parts[i-1].size + parts[i-1].offset; ++ parts[i].size = fl->next->img->flash_base - parts[i].offset; ++ parts[i].name = nullname; + #endif ++ } ++ } + tmp_fl = fl; + fl = fl->next; + kfree(tmp_fl); diff --git a/target/linux/generic/pending-5.15/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-5.15/430-mtd-add-myloader-partition-parser.patch new file mode 100644 index 0000000000..0889c9a343 --- /dev/null +++ b/target/linux/generic/pending-5.15/430-mtd-add-myloader-partition-parser.patch @@ -0,0 +1,229 @@ +From: Florian Fainelli +Subject: Add myloader partition table parser + +[john@phozen.org: shoud be upstreamable] + +lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8 +Signed-off-by: Florian Fainelli +[adjust for kernel 5.4, add myloader.c to patch] +Signed-off-by: Adrian Schmutzler + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -57,6 +57,22 @@ config MTD_CMDLINE_PARTS + + If unsure, say 'N'. + ++config MTD_MYLOADER_PARTS ++ tristate "MyLoader partition parsing" ++ depends on ADM5120 || ATH25 || ATH79 ++ help ++ MyLoader is a bootloader which allows the user to define partitions ++ in flash devices, by putting a table in the second erase block ++ on the device, similar to a partition table. This table gives the ++ offsets and lengths of the user defined partitions. ++ ++ If you need code which can detect and parse these tables, and ++ register MTD 'partitions' corresponding to each image detected, ++ enable this option. ++ ++ You will still need the parsing functions to be called by the driver ++ for your particular device. It won't happen automatically. ++ + config MTD_OF_PARTS + tristate "OpenFirmware (device tree) partitioning parser" + default y +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -3,6 +3,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part. + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o ++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + ofpart-y += ofpart_core.o + ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o +--- /dev/null ++++ b/drivers/mtd/parsers/myloader.c +@@ -0,0 +1,181 @@ ++/* ++ * Parse MyLoader-style flash partition tables and produce a Linux partition ++ * array to match. ++ * ++ * Copyright (C) 2007-2009 Gabor Juhos ++ * ++ * This file was based on drivers/mtd/redboot.c ++ * Author: Red Hat, Inc. - David Woodhouse ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BLOCK_LEN_MIN 0x10000 ++#define PART_NAME_LEN 32 ++ ++struct part_data { ++ struct mylo_partition_table tab; ++ char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN]; ++}; ++ ++static int myloader_parse_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct part_data *buf; ++ struct mylo_partition_table *tab; ++ struct mylo_partition *part; ++ struct mtd_partition *mtd_parts; ++ struct mtd_partition *mtd_part; ++ int num_parts; ++ int ret, i; ++ size_t retlen; ++ char *names; ++ unsigned long offset; ++ unsigned long blocklen; ++ ++ buf = vmalloc(sizeof(*buf)); ++ if (!buf) { ++ return -ENOMEM; ++ goto out; ++ } ++ tab = &buf->tab; ++ ++ blocklen = master->erasesize; ++ if (blocklen < BLOCK_LEN_MIN) ++ blocklen = BLOCK_LEN_MIN; ++ ++ offset = blocklen; ++ ++ /* Find the partition table */ ++ for (i = 0; i < 4; i++, offset += blocklen) { ++ printk(KERN_DEBUG "%s: searching for MyLoader partition table" ++ " at offset 0x%lx\n", master->name, offset); ++ ++ ret = mtd_read(master, offset, sizeof(*buf), &retlen, ++ (void *)buf); ++ if (ret) ++ goto out_free_buf; ++ ++ if (retlen != sizeof(*buf)) { ++ ret = -EIO; ++ goto out_free_buf; ++ } ++ ++ /* Check for Partition Table magic number */ ++ if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS)) ++ break; ++ ++ } ++ ++ if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) { ++ printk(KERN_DEBUG "%s: no MyLoader partition table found\n", ++ master->name); ++ ret = 0; ++ goto out_free_buf; ++ } ++ ++ /* The MyLoader and the Partition Table is always present */ ++ num_parts = 2; ++ ++ /* Detect number of used partitions */ ++ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { ++ part = &tab->partitions[i]; ++ ++ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) ++ continue; ++ ++ num_parts++; ++ } ++ ++ mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) + ++ num_parts * PART_NAME_LEN), GFP_KERNEL); ++ ++ if (!mtd_parts) { ++ ret = -ENOMEM; ++ goto out_free_buf; ++ } ++ ++ mtd_part = mtd_parts; ++ names = (char *)&mtd_parts[num_parts]; ++ ++ strncpy(names, "myloader", PART_NAME_LEN); ++ mtd_part->name = names; ++ mtd_part->offset = 0; ++ mtd_part->size = offset; ++ mtd_part->mask_flags = MTD_WRITEABLE; ++ mtd_part++; ++ names += PART_NAME_LEN; ++ ++ strncpy(names, "partition_table", PART_NAME_LEN); ++ mtd_part->name = names; ++ mtd_part->offset = offset; ++ mtd_part->size = blocklen; ++ mtd_part->mask_flags = MTD_WRITEABLE; ++ mtd_part++; ++ names += PART_NAME_LEN; ++ ++ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { ++ part = &tab->partitions[i]; ++ ++ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) ++ continue; ++ ++ if ((buf->names[i][0]) && (buf->names[i][0] != '\xff')) ++ strncpy(names, buf->names[i], PART_NAME_LEN); ++ else ++ snprintf(names, PART_NAME_LEN, "partition%d", i); ++ ++ mtd_part->offset = le32_to_cpu(part->addr); ++ mtd_part->size = le32_to_cpu(part->size); ++ mtd_part->name = names; ++ mtd_part++; ++ names += PART_NAME_LEN; ++ } ++ ++ *pparts = mtd_parts; ++ ret = num_parts; ++ ++ out_free_buf: ++ vfree(buf); ++ out: ++ return ret; ++} ++ ++static struct mtd_part_parser myloader_mtd_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = myloader_parse_partitions, ++ .name = "MyLoader", ++}; ++ ++static int __init myloader_mtd_parser_init(void) ++{ ++ register_mtd_parser(&myloader_mtd_parser); ++ ++ return 0; ++} ++ ++static void __exit myloader_mtd_parser_exit(void) ++{ ++ deregister_mtd_parser(&myloader_mtd_parser); ++} ++ ++module_init(myloader_mtd_parser_init); ++module_exit(myloader_mtd_parser_exit); ++ ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_DESCRIPTION("Parsing code for MyLoader partition tables"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/pending-5.15/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-5.15/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch new file mode 100644 index 0000000000..bcea45d009 --- /dev/null +++ b/target/linux/generic/pending-5.15/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch @@ -0,0 +1,68 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/mtd/parsers/parser_trx.c ++++ b/drivers/mtd/parsers/parser_trx.c +@@ -25,6 +25,33 @@ struct trx_header { + uint32_t offset[3]; + } __packed; + ++/* ++ * Calculate real end offset (address) for a given amount of data. It checks ++ * all blocks skipping bad ones. ++ */ ++static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes) ++{ ++ size_t real_offset = 0; ++ ++ if (mtd_block_isbad(mtd, real_offset)) ++ pr_warn("Base offset shouldn't be at bad block"); ++ ++ while (bytes >= mtd->erasesize) { ++ bytes -= mtd->erasesize; ++ real_offset += mtd->erasesize; ++ while (mtd_block_isbad(mtd, real_offset)) { ++ real_offset += mtd->erasesize; ++ ++ if (real_offset >= mtd->size) ++ return real_offset - mtd->erasesize; ++ } ++ } ++ ++ real_offset += bytes; ++ ++ return real_offset; ++} ++ + static const char *parser_trx_data_part_name(struct mtd_info *master, + size_t offset) + { +@@ -86,21 +113,21 @@ static int parser_trx_parse(struct mtd_i + if (trx.offset[2]) { + part = &parts[curr_part++]; + part->name = "loader"; +- part->offset = trx.offset[i]; ++ part->offset = parser_trx_real_offset(mtd, trx.offset[i]); + i++; + } + + if (trx.offset[i]) { + part = &parts[curr_part++]; + part->name = "linux"; +- part->offset = trx.offset[i]; ++ part->offset = parser_trx_real_offset(mtd, trx.offset[i]); + i++; + } + + if (trx.offset[i]) { + part = &parts[curr_part++]; +- part->name = parser_trx_data_part_name(mtd, trx.offset[i]); +- part->offset = trx.offset[i]; ++ part->offset = parser_trx_real_offset(mtd, trx.offset[i]); ++ part->name = parser_trx_data_part_name(mtd, part->offset); + i++; + } + diff --git a/target/linux/generic/pending-5.15/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-5.15/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch new file mode 100644 index 0000000000..852654d924 --- /dev/null +++ b/target/linux/generic/pending-5.15/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch @@ -0,0 +1,37 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: mtd: bcm47xxpart: detect T_Meter partition + +It can be found on many Netgear devices. It consists of many 0x30 blocks +starting with 4D 54. + +Signed-off-by: Rafał Miłecki +--- + drivers/mtd/bcm47xxpart.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/mtd/parsers/bcm47xxpart.c ++++ b/drivers/mtd/parsers/bcm47xxpart.c +@@ -35,6 +35,7 @@ + #define NVRAM_HEADER 0x48534C46 /* FLSH */ + #define POT_MAGIC1 0x54544f50 /* POTT */ + #define POT_MAGIC2 0x504f /* OP */ ++#define T_METER_MAGIC 0x4D540000 /* MT */ + #define ML_MAGIC1 0x39685a42 + #define ML_MAGIC2 0x26594131 + #define TRX_MAGIC 0x30524448 +@@ -178,6 +179,15 @@ static int bcm47xxpart_parse(struct mtd_ + MTD_WRITEABLE); + continue; + } ++ ++ /* T_Meter */ ++ if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC && ++ (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC && ++ (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) { ++ bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset, ++ MTD_WRITEABLE); ++ continue; ++ } + + /* TRX */ + if (buf[0x000 / 4] == TRX_MAGIC) { diff --git a/target/linux/generic/pending-5.15/435-mtd-add-routerbootpart-parser-config.patch b/target/linux/generic/pending-5.15/435-mtd-add-routerbootpart-parser-config.patch new file mode 100644 index 0000000000..ab1e09a5f1 --- /dev/null +++ b/target/linux/generic/pending-5.15/435-mtd-add-routerbootpart-parser-config.patch @@ -0,0 +1,38 @@ +From 4437e01fb6bca63fccdba5d6c44888b0935885c2 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= +Date: Tue, 24 Mar 2020 11:45:07 +0100 +Subject: [PATCH] generic: routerboot partition build bits (5.4) +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch adds routerbootpart kernel build bits + +Signed-off-by: Thibaut VARÈNE +--- + drivers/mtd/parsers/Kconfig | 9 +++++++++ + drivers/mtd/parsers/Makefile | 1 + + 2 files changed, 10 insertions(+) + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -195,3 +195,12 @@ config MTD_REDBOOT_PARTS_READONLY + 'FIS directory' images, enable this option. + + endif # MTD_REDBOOT_PARTS ++ ++config MTD_ROUTERBOOT_PARTS ++ tristate "RouterBoot flash partition parser" ++ depends on MTD && OF ++ help ++ MikroTik RouterBoot is implemented as a multi segment system on the ++ flash, some of which are fixed and some of which are located at ++ variable offsets. This parser handles both cases via properly ++ formatted DTS. +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -13,3 +13,4 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o + obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o ++obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o diff --git a/target/linux/generic/pending-5.15/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.15/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch new file mode 100644 index 0000000000..9983971af5 --- /dev/null +++ b/target/linux/generic/pending-5.15/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch @@ -0,0 +1,25 @@ +From: Felix Fietkau +Subject: kernel: disable cfi cmdset 0002 erase suspend + +on some platforms, erase suspend leads to data corruption and lockups when write +ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh. +rather than play whack-a-mole with a hard to reproduce issue on a variety of devices, +simply disable erase suspend, as it will usually not produce any useful gain on +the small filesystems used on embedded hardware. + +Signed-off-by: Felix Fietkau +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -913,7 +913,7 @@ static int get_chip(struct map_info *map + return 0; + + case FL_ERASING: +- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) || ++ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) || + !(mode == FL_READY || mode == FL_POINT || + (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) + goto sleep; diff --git a/target/linux/generic/pending-5.15/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.15/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch new file mode 100644 index 0000000000..0bda2ed971 --- /dev/null +++ b/target/linux/generic/pending-5.15/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch @@ -0,0 +1,17 @@ +From: George Kashperko +Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data. + +Signed-off-by: George Kashperko +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 1 + + 1 file changed, 1 insertion(+) +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -2057,6 +2057,7 @@ static int __xipram do_write_buffer(stru + + /* Write Buffer Load */ + map_write(map, CMD(0x25), cmd_adr); ++ (void) map_read(map, cmd_adr); + + chip->state = FL_WRITING_TO_BUFFER; + diff --git a/target/linux/generic/pending-5.15/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-5.15/465-m25p80-mx-disable-software-protection.patch new file mode 100644 index 0000000000..f58d5452ab --- /dev/null +++ b/target/linux/generic/pending-5.15/465-m25p80-mx-disable-software-protection.patch @@ -0,0 +1,18 @@ +From: Felix Fietkau +Subject: Disable software protection bits for Macronix flashes. + +Signed-off-by: Felix Fietkau +--- + drivers/mtd/spi-nor/spi-nor.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/spi-nor/macronix.c ++++ b/drivers/mtd/spi-nor/macronix.c +@@ -93,6 +93,7 @@ static void macronix_default_init(struct + { + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode; ++ nor->flags |= SNOR_F_HAS_LOCK; + } + + static const struct spi_nor_fixups macronix_fixups = { diff --git a/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch new file mode 100644 index 0000000000..2748192dd2 --- /dev/null +++ b/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch @@ -0,0 +1,71 @@ +From: Felix Fietkau +Date: Sat, 4 Nov 2017 07:40:23 +0100 +Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on + flash size + +Some devices need 4K sectors to be able to deal with small flash chips. +For instance, w25x05 is 64 KiB in size, and without 4K sectors, the +entire chip is just one erase block. +On bigger flash chip sizes, using 4K sectors can significantly slow down +many operations, including using a writable filesystem. There are several +platforms where it makes sense to use a single kernel on both kinds of +devices. + +To support this properly, allow configuring an upper flash chip size +limit for 4K sectors support. + +Signed-off-by: Felix Fietkau +--- + +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -34,6 +34,17 @@ config MTD_SPI_NOR_USE_4K_SECTORS + Please note that some tools/drivers/filesystems may not work with + 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum). + ++config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT ++ int "Maximum flash chip size to use 4K sectors on (in KiB)" ++ depends on MTD_SPI_NOR_USE_4K_SECTORS ++ default "4096" ++ help ++ There are many flash chips that support 4K sectors, but are so large ++ that using them significantly slows down writing large amounts of ++ data or using a writable filesystem. ++ Any flash chip larger than the size specified in this option will ++ not use 4K sectors. ++ + source "drivers/mtd/spi-nor/controllers/Kconfig" + + endif # MTD_SPI_NOR +--- a/drivers/mtd/spi-nor/core.c ++++ b/drivers/mtd/spi-nor/core.c +@@ -2792,6 +2792,21 @@ static void spi_nor_info_init_params(str + */ + erase_mask = 0; + i = 0; ++#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS ++ if ((info->flags & SECT_4K_PMC) && (params->size <= ++ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { ++ erase_mask |= BIT(i); ++ spi_nor_set_erase_type(&map->erase_type[i], 4096u, ++ SPINOR_OP_BE_4K_PMC); ++ i++; ++ } else if ((info->flags & SECT_4K) && (params->size <= ++ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { ++ erase_mask |= BIT(i); ++ spi_nor_set_erase_type(&map->erase_type[i], 4096u, ++ SPINOR_OP_BE_4K); ++ i++; ++ } ++#else + if (info->flags & SECT_4K_PMC) { + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], 4096u, +@@ -2803,6 +2818,7 @@ static void spi_nor_info_init_params(str + SPINOR_OP_BE_4K); + i++; + } ++#endif + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, + SPINOR_OP_SE); diff --git a/target/linux/generic/pending-5.15/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-5.15/476-mtd-spi-nor-add-eon-en25q128.patch new file mode 100644 index 0000000000..325fca62f3 --- /dev/null +++ b/target/linux/generic/pending-5.15/476-mtd-spi-nor-add-eon-en25q128.patch @@ -0,0 +1,18 @@ +From: Piotr Dymacz +Subject: kernel/mtd: add support for EON EN25Q128 + +Signed-off-by: Piotr Dymacz +--- + drivers/mtd/spi-nor/spi-nor.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/spi-nor/eon.c ++++ b/drivers/mtd/spi-nor/eon.c +@@ -15,6 +15,7 @@ static const struct flash_info eon_parts + { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, + { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, ++ { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) }, + { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16, + SECT_4K | SPI_NOR_DUAL_READ) }, + { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32, diff --git a/target/linux/generic/pending-5.15/479-mtd-spi-nor-add-xtx-xt25f128b.patch b/target/linux/generic/pending-5.15/479-mtd-spi-nor-add-xtx-xt25f128b.patch new file mode 100644 index 0000000000..796bf6becb --- /dev/null +++ b/target/linux/generic/pending-5.15/479-mtd-spi-nor-add-xtx-xt25f128b.patch @@ -0,0 +1,79 @@ +From patchwork Thu Feb 6 17:19:41 2020 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 1234465 +Date: Thu, 6 Feb 2020 19:19:41 +0200 +From: Daniel Golle +To: linux-mtd@lists.infradead.org +Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip +Message-ID: <20200206171941.GA2398@makrotopia.org> +MIME-Version: 1.0 +Content-Disposition: inline +List-Subscribe: , + +Cc: Eitan Cohen , Piotr Dymacz , + Tudor Ambarus +Sender: "linux-mtd" +Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org + +Add XT25F128B made by XTX Technology (Shenzhen) Limited. +This chip supports dual and quad read and uniform 4K-byte erase. +Verified on Teltonika RUT955 which comes with XT25F128B in recent +versions of the device. + +Signed-off-by: Daniel Golle +Signed-off-by: Felix Fietkau +--- + drivers/mtd/spi-nor/spi-nor.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/spi-nor/Makefile ++++ b/drivers/mtd/spi-nor/Makefile +@@ -17,6 +17,7 @@ spi-nor-objs += sst.o + spi-nor-objs += winbond.o + spi-nor-objs += xilinx.o + spi-nor-objs += xmc.o ++spi-nor-objs += xtx.o + obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o + + obj-$(CONFIG_MTD_SPI_NOR) += controllers/ +--- /dev/null ++++ b/drivers/mtd/spi-nor/xtx.c +@@ -0,0 +1,15 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include ++ ++#include "core.h" ++ ++static const struct flash_info xtx_parts[] = { ++ /* XTX Technology (Shenzhen) Limited */ ++ { "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++}; ++ ++const struct spi_nor_manufacturer spi_nor_xtx = { ++ .name = "xtx", ++ .parts = xtx_parts, ++ .nparts = ARRAY_SIZE(xtx_parts), ++}; +--- a/drivers/mtd/spi-nor/core.c ++++ b/drivers/mtd/spi-nor/core.c +@@ -2028,6 +2028,7 @@ static const struct spi_nor_manufacturer + &spi_nor_winbond, + &spi_nor_xilinx, + &spi_nor_xmc, ++ &spi_nor_xtx, + }; + + static const struct flash_info * +--- a/drivers/mtd/spi-nor/core.h ++++ b/drivers/mtd/spi-nor/core.h +@@ -398,6 +398,7 @@ extern const struct spi_nor_manufacturer + extern const struct spi_nor_manufacturer spi_nor_winbond; + extern const struct spi_nor_manufacturer spi_nor_xilinx; + extern const struct spi_nor_manufacturer spi_nor_xmc; ++extern const struct spi_nor_manufacturer spi_nor_xtx; + + int spi_nor_write_enable(struct spi_nor *nor); + int spi_nor_write_disable(struct spi_nor *nor); diff --git a/target/linux/generic/pending-5.15/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch b/target/linux/generic/pending-5.15/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch new file mode 100644 index 0000000000..c32cde559d --- /dev/null +++ b/target/linux/generic/pending-5.15/482-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch @@ -0,0 +1,22 @@ +From d68b4aa22e8c625685bfad642dd7337948dc0ad1 Mon Sep 17 00:00:00 2001 +From: Koen Vandeputte +Date: Mon, 6 Jan 2020 13:07:56 +0100 +Subject: [PATCH] mtd: spi-nor: add support for Gigadevice GD25D05 + +Signed-off-by: Koen Vandeputte +--- + drivers/mtd/spi-nor/spi-nor.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/mtd/spi-nor/gigadevice.c ++++ b/drivers/mtd/spi-nor/gigadevice.c +@@ -24,6 +24,9 @@ static struct spi_nor_fixups gd25q256_fi + }; + + static const struct flash_info gigadevice_parts[] = { ++ { "gd25q05", INFO(0xc84010, 0, 64 * 1024, 1, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, diff --git a/target/linux/generic/pending-5.15/483-mtd-spi-nor-add-gd25q512.patch b/target/linux/generic/pending-5.15/483-mtd-spi-nor-add-gd25q512.patch new file mode 100644 index 0000000000..6f41546964 --- /dev/null +++ b/target/linux/generic/pending-5.15/483-mtd-spi-nor-add-gd25q512.patch @@ -0,0 +1,12 @@ +--- a/drivers/mtd/spi-nor/gigadevice.c ++++ b/drivers/mtd/spi-nor/gigadevice.c +@@ -53,6 +53,9 @@ static const struct flash_info gigadevic + SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | + SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) + .fixups = &gd25q256_fixups }, ++ { "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) }, + }; + + const struct spi_nor_manufacturer spi_nor_gigadevice = { diff --git a/target/linux/generic/pending-5.15/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch b/target/linux/generic/pending-5.15/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch new file mode 100644 index 0000000000..11590770cd --- /dev/null +++ b/target/linux/generic/pending-5.15/483-mtd-spinand-add-support-for-xtx-xt26g0xa.patch @@ -0,0 +1,178 @@ +From a07e31adf2753cad2fd9790db5bfc047c81e8152 Mon Sep 17 00:00:00 2001 +From: Felix Matouschek +Date: Fri, 2 Jul 2021 20:31:23 +0200 +Subject: [PATCH] mtd: spinand: Add support for XTX XT26G0xA + +Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and +XTX26G04AXXXXX SPI NAND. + +These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC +(8bit strength per 512bytes). + +Tested on Teltonika RUTX10 flashed with OpenWrt. + +Datasheets available at +http://www.xtxtech.com/download/?AId=225 +https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf + +Signed-off-by: Felix Matouschek +--- + drivers/mtd/nand/spi/Makefile | 2 +- + drivers/mtd/nand/spi/core.c | 1 + + drivers/mtd/nand/spi/xtx.c | 122 ++++++++++++++++++++++++++++++++++ + include/linux/mtd/spinand.h | 1 + + 4 files changed, 125 insertions(+), 1 deletion(-) + create mode 100644 drivers/mtd/nand/spi/xtx.c + +--- a/drivers/mtd/nand/spi/Makefile ++++ b/drivers/mtd/nand/spi/Makefile +@@ -1,3 +1,3 @@ + # SPDX-License-Identifier: GPL-2.0 +-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o ++spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o + obj-$(CONFIG_MTD_SPI_NAND) += spinand.o +--- a/drivers/mtd/nand/spi/core.c ++++ b/drivers/mtd/nand/spi/core.c +@@ -760,6 +760,7 @@ static const struct spinand_manufacturer + ¶gon_spinand_manufacturer, + &toshiba_spinand_manufacturer, + &winbond_spinand_manufacturer, ++ &xtx_spinand_manufacturer, + }; + + static int spinand_manufacturer_match(struct spinand_device *spinand, +--- /dev/null ++++ b/drivers/mtd/nand/spi/xtx.c +@@ -0,0 +1,122 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Author: ++ * Felix Matouschek ++ */ ++ ++#include ++#include ++#include ++ ++#define SPINAND_MFR_XTX 0x0B ++ ++#define XT26G0XA_STATUS_ECC_MASK GENMASK(5, 2) ++#define XT26G0XA_STATUS_ECC_NO_DETECTED (0 << 2) ++#define XT26G0XA_STATUS_ECC_8_CORRECTED (3 << 4) ++#define XT26G0XA_STATUS_ECC_UNCOR_ERROR (2 << 4) ++ ++static SPINAND_OP_VARIANTS(read_cache_variants, ++ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0), ++ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), ++ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0), ++ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0), ++ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), ++ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); ++ ++static SPINAND_OP_VARIANTS(write_cache_variants, ++ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), ++ SPINAND_PROG_LOAD(true, 0, NULL, 0)); ++ ++static SPINAND_OP_VARIANTS(update_cache_variants, ++ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), ++ SPINAND_PROG_LOAD(false, 0, NULL, 0)); ++ ++static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *region) ++{ ++ if (section) ++ return -ERANGE; ++ ++ region->offset = 8; ++ region->length = 40; ++ ++ return 0; ++} ++ ++static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *region) ++{ ++ if (section) ++ return -ERANGE; ++ ++ region->offset = 1; ++ region->length = 7; ++ ++ return 0; ++} ++ ++static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = { ++ .ecc = xt26g0xa_ooblayout_ecc, ++ .free = xt26g0xa_ooblayout_free, ++}; ++ ++static int xt26g0xa_ecc_get_status(struct spinand_device *spinand, ++ u8 status) ++{ ++ switch (status & XT26G0XA_STATUS_ECC_MASK) { ++ case XT26G0XA_STATUS_ECC_NO_DETECTED: ++ return 0; ++ case XT26G0XA_STATUS_ECC_8_CORRECTED: ++ return 8; ++ case XT26G0XA_STATUS_ECC_UNCOR_ERROR: ++ return -EBADMSG; ++ default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */ ++ return (status & XT26G0XA_STATUS_ECC_MASK) >> 2; ++ } ++ ++ return -EINVAL; ++} ++ ++static const struct spinand_info xtx_spinand_table[] = { ++ SPINAND_INFO("XT26G01A", ++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE1), ++ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), ++ NAND_ECCREQ(8, 512), ++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants, ++ &write_cache_variants, ++ &update_cache_variants), ++ SPINAND_HAS_QE_BIT, ++ SPINAND_ECCINFO(&xt26g0xa_ooblayout, ++ xt26g0xa_ecc_get_status)), ++ SPINAND_INFO("XT26G02A", ++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE2), ++ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1), ++ NAND_ECCREQ(8, 512), ++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants, ++ &write_cache_variants, ++ &update_cache_variants), ++ SPINAND_HAS_QE_BIT, ++ SPINAND_ECCINFO(&xt26g0xa_ooblayout, ++ xt26g0xa_ecc_get_status)), ++ SPINAND_INFO("XT26G04A", ++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE3), ++ NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1), ++ NAND_ECCREQ(8, 512), ++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants, ++ &write_cache_variants, ++ &update_cache_variants), ++ SPINAND_HAS_QE_BIT, ++ SPINAND_ECCINFO(&xt26g0xa_ooblayout, ++ xt26g0xa_ecc_get_status)), ++}; ++ ++static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = { ++}; ++ ++const struct spinand_manufacturer xtx_spinand_manufacturer = { ++ .id = SPINAND_MFR_XTX, ++ .name = "XTX", ++ .chips = xtx_spinand_table, ++ .nchips = ARRAY_SIZE(xtx_spinand_table), ++ .ops = &xtx_spinand_manuf_ops, ++}; +--- a/include/linux/mtd/spinand.h ++++ b/include/linux/mtd/spinand.h +@@ -244,6 +244,7 @@ extern const struct spinand_manufacturer + extern const struct spinand_manufacturer paragon_spinand_manufacturer; + extern const struct spinand_manufacturer toshiba_spinand_manufacturer; + extern const struct spinand_manufacturer winbond_spinand_manufacturer; ++extern const struct spinand_manufacturer xtx_spinand_manufacturer; + + /** + * struct spinand_op_variants - SPI NAND operation variants diff --git a/target/linux/generic/pending-5.15/484-mtd-spi-nor-add-esmt-f25l16pa.patch b/target/linux/generic/pending-5.15/484-mtd-spi-nor-add-esmt-f25l16pa.patch new file mode 100644 index 0000000000..ce3857d511 --- /dev/null +++ b/target/linux/generic/pending-5.15/484-mtd-spi-nor-add-esmt-f25l16pa.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/spi-nor/esmt.c ++++ b/drivers/mtd/spi-nor/esmt.c +@@ -10,6 +10,8 @@ + + static const struct flash_info esmt_parts[] = { + /* ESMT */ ++ { "f25l16pa-2s", INFO(0x8c2115, 0, 64 * 1024, 32, ++ SECT_4K | SPI_NOR_HAS_LOCK) }, + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_HAS_LOCK) }, + { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, diff --git a/target/linux/generic/pending-5.15/485-mtd-spi-nor-add-xmc-xm25qh128c.patch b/target/linux/generic/pending-5.15/485-mtd-spi-nor-add-xmc-xm25qh128c.patch new file mode 100644 index 0000000000..4b3f674170 --- /dev/null +++ b/target/linux/generic/pending-5.15/485-mtd-spi-nor-add-xmc-xm25qh128c.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/spi-nor/xmc.c ++++ b/drivers/mtd/spi-nor/xmc.c +@@ -14,6 +14,8 @@ static const struct flash_info xmc_parts + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++ { "XM25QH128C", INFO(0x204018, 0, 64 * 1024, 256, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + }; + + const struct spi_nor_manufacturer spi_nor_xmc = { diff --git a/target/linux/generic/pending-5.15/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-5.15/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch new file mode 100644 index 0000000000..7c9766fa7b --- /dev/null +++ b/target/linux/generic/pending-5.15/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch @@ -0,0 +1,97 @@ +From: Daniel Golle +Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot + +Signed-off-by: Daniel Golle +--- + drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/drivers/mtd/ubi/build.c ++++ b/drivers/mtd/ubi/build.c +@@ -1192,6 +1192,73 @@ static struct mtd_info * __init open_mtd + return mtd; + } + ++/* ++ * This function tries attaching mtd partitions named either "ubi" or "data" ++ * during boot. ++ */ ++static void __init ubi_auto_attach(void) ++{ ++ int err; ++ struct mtd_info *mtd; ++ loff_t offset = 0; ++ size_t len; ++ char magic[4]; ++ ++ /* try attaching mtd device named "ubi" or "data" */ ++ mtd = open_mtd_device("ubi"); ++ if (IS_ERR(mtd)) ++ mtd = open_mtd_device("data"); ++ ++ if (IS_ERR(mtd)) ++ return; ++ ++ /* get the first not bad block */ ++ if (mtd_can_have_bb(mtd)) ++ while (mtd_block_isbad(mtd, offset)) { ++ offset += mtd->erasesize; ++ ++ if (offset > mtd->size) { ++ pr_err("UBI error: Failed to find a non-bad " ++ "block on mtd%d\n", mtd->index); ++ goto cleanup; ++ } ++ } ++ ++ /* check if the read from flash was successful */ ++ err = mtd_read(mtd, offset, 4, &len, (void *) magic); ++ if ((err && !mtd_is_bitflip(err)) || len != 4) { ++ pr_err("UBI error: unable to read from mtd%d\n", mtd->index); ++ goto cleanup; ++ } ++ ++ /* check for a valid ubi magic */ ++ if (strncmp(magic, "UBI#", 4)) { ++ pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index); ++ goto cleanup; ++ } ++ ++ /* don't auto-add media types where UBI doesn't makes sense */ ++ if (mtd->type != MTD_NANDFLASH && ++ mtd->type != MTD_NORFLASH && ++ mtd->type != MTD_DATAFLASH && ++ mtd->type != MTD_MLCNANDFLASH) ++ goto cleanup; ++ ++ mutex_lock(&ubi_devices_mutex); ++ pr_notice("UBI: auto-attach mtd%d\n", mtd->index); ++ err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0); ++ mutex_unlock(&ubi_devices_mutex); ++ if (err < 0) { ++ pr_err("UBI error: cannot attach mtd%d\n", mtd->index); ++ goto cleanup; ++ } ++ ++ return; ++ ++cleanup: ++ put_mtd_device(mtd); ++} ++ + static int __init ubi_init(void) + { + int err, i, k; +@@ -1275,6 +1342,12 @@ static int __init ubi_init(void) + } + } + ++ /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd ++ * parameter was given */ ++ if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && ++ !ubi_is_module() && !mtd_devs) ++ ubi_auto_attach(); ++ + err = ubiblock_init(); + if (err) { + pr_err("UBI error: block: cannot initialize, error %d\n", err); diff --git a/target/linux/generic/pending-5.15/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-5.15/491-ubi-auto-create-ubiblock-device-for-rootfs.patch new file mode 100644 index 0000000000..a2b48fd4fc --- /dev/null +++ b/target/linux/generic/pending-5.15/491-ubi-auto-create-ubiblock-device-for-rootfs.patch @@ -0,0 +1,69 @@ +From: Daniel Golle +Subject: ubi: auto-create ubiblock device for rootfs + +Signed-off-by: Daniel Golle +--- + drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 42 insertions(+) + +--- a/drivers/mtd/ubi/block.c ++++ b/drivers/mtd/ubi/block.c +@@ -652,6 +652,47 @@ static void __init ubiblock_create_from_ + } + } + ++#define UBIFS_NODE_MAGIC 0x06101831 ++static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc) ++{ ++ int ret; ++ uint32_t magic_of, magic; ++ ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4); ++ if (ret) ++ return 0; ++ magic = le32_to_cpu(magic_of); ++ return magic == UBIFS_NODE_MAGIC; ++} ++ ++static void __init ubiblock_create_auto_rootfs(void) ++{ ++ int ubi_num, ret, is_ubifs; ++ struct ubi_volume_desc *desc; ++ struct ubi_volume_info vi; ++ ++ for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) { ++ desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY); ++ if (IS_ERR(desc)) ++ desc = ubi_open_volume_nm(ubi_num, "fit", UBI_READONLY);; ++ ++ if (IS_ERR(desc)) ++ continue; ++ ++ ubi_get_volume_info(desc, &vi); ++ is_ubifs = ubi_vol_is_ubifs(desc); ++ ubi_close_volume(desc); ++ if (is_ubifs) ++ break; ++ ++ ret = ubiblock_create(&vi); ++ if (ret) ++ pr_err("UBI error: block: can't add '%s' volume, err=%d\n", ++ vi.name, ret); ++ /* always break if we get here */ ++ break; ++ } ++} ++ + static void ubiblock_remove_all(void) + { + struct ubiblock *next; +@@ -684,6 +725,10 @@ int __init ubiblock_init(void) + */ + ubiblock_create_from_param(); + ++ /* auto-attach "rootfs" volume if existing and non-ubifs */ ++ if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV)) ++ ubiblock_create_auto_rootfs(); ++ + /* + * Block devices are only created upon user requests, so we ignore + * existing volumes. diff --git a/target/linux/generic/pending-5.15/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-5.15/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch new file mode 100644 index 0000000000..e3c4dd2ef4 --- /dev/null +++ b/target/linux/generic/pending-5.15/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch @@ -0,0 +1,53 @@ +From: Daniel Golle +Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c + +Signed-off-by: Daniel Golle +--- + init/do_mounts.c | 26 +++++++++++++++++++++++++- + 1 file changed, 25 insertions(+), 1 deletion(-) + +--- a/init/do_mounts.c ++++ b/init/do_mounts.c +@@ -474,7 +474,30 @@ retry: + out: + put_page(page); + } +- ++ ++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV ++static int __init mount_ubi_rootfs(void) ++{ ++ int flags = MS_SILENT; ++ int err, tried = 0; ++ ++ while (tried < 2) { ++ err = do_mount_root("ubi0:rootfs", "ubifs", flags, \ ++ root_mount_data); ++ switch (err) { ++ case -EACCES: ++ flags |= MS_RDONLY; ++ tried++; ++ break; ++ default: ++ return err; ++ } ++ } ++ ++ return -EINVAL; ++} ++#endif ++ + #ifdef CONFIG_ROOT_NFS + + #define NFSROOT_TIMEOUT_MIN 5 +@@ -567,6 +590,10 @@ void __init mount_root(void) + return; + } + #endif ++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV ++ if (!mount_ubi_rootfs()) ++ return; ++#endif + #ifdef CONFIG_BLOCK + { + int err = create_dev("/dev/root", ROOT_DEV); diff --git a/target/linux/generic/pending-5.15/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-5.15/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch new file mode 100644 index 0000000000..2dff46807e --- /dev/null +++ b/target/linux/generic/pending-5.15/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch @@ -0,0 +1,34 @@ +From: Daniel Golle +Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset + +Signed-off-by: Daniel Golle +--- + drivers/mtd/ubi/block.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/mtd/ubi/block.c ++++ b/drivers/mtd/ubi/block.c +@@ -42,6 +42,7 @@ + #include + #include + #include ++#include + + #include "ubi-media.h" + #include "ubi.h" +@@ -458,6 +459,15 @@ int ubiblock_create(struct ubi_volume_in + dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)", + dev->ubi_num, dev->vol_id, vi->name); + mutex_unlock(&devices_mutex); ++ ++ if (!strcmp(vi->name, "rootfs") && ++ IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && ++ ROOT_DEV == 0) { ++ pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n", ++ dev->ubi_num, dev->vol_id, vi->name); ++ ROOT_DEV = MKDEV(gd->major, gd->first_minor); ++ } ++ + return 0; + + out_free_queue: diff --git a/target/linux/generic/pending-5.15/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-5.15/494-mtd-ubi-add-EOF-marker-support.patch new file mode 100644 index 0000000000..81d32ca5a5 --- /dev/null +++ b/target/linux/generic/pending-5.15/494-mtd-ubi-add-EOF-marker-support.patch @@ -0,0 +1,60 @@ +From: Gabor Juhos +Subject: mtd: add EOF marker support to the UBI layer + +Signed-off-by: Gabor Juhos +--- + drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++--- + drivers/mtd/ubi/ubi.h | 1 + + 2 files changed, 23 insertions(+), 3 deletions(-) + +--- a/drivers/mtd/ubi/attach.c ++++ b/drivers/mtd/ubi/attach.c +@@ -926,6 +926,13 @@ static bool vol_ignored(int vol_id) + #endif + } + ++static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech) ++{ ++ return ech->padding1[0] == 'E' && ++ ech->padding1[1] == 'O' && ++ ech->padding1[2] == 'F'; ++} ++ + /** + * scan_peb - scan and process UBI headers of a PEB. + * @ubi: UBI device description object +@@ -958,9 +965,21 @@ static int scan_peb(struct ubi_device *u + return 0; + } + +- err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0); +- if (err < 0) +- return err; ++ if (!ai->eof_found) { ++ err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0); ++ if (err < 0) ++ return err; ++ ++ if (ec_hdr_has_eof(ech)) { ++ pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n", ++ pnum); ++ ai->eof_found = true; ++ } ++ } ++ ++ if (ai->eof_found) ++ err = UBI_IO_FF_BITFLIPS; ++ + switch (err) { + case 0: + break; +--- a/drivers/mtd/ubi/ubi.h ++++ b/drivers/mtd/ubi/ubi.h +@@ -782,6 +782,7 @@ struct ubi_attach_info { + int mean_ec; + uint64_t ec_sum; + int ec_count; ++ bool eof_found; + struct kmem_cache *aeb_slab_cache; + struct ubi_ec_hdr *ech; + struct ubi_vid_io_buf *vidb; diff --git a/target/linux/generic/pending-5.15/495-mtd-core-add-get_mtd_device_by_node.patch b/target/linux/generic/pending-5.15/495-mtd-core-add-get_mtd_device_by_node.patch new file mode 100644 index 0000000000..d5db5fdd54 --- /dev/null +++ b/target/linux/generic/pending-5.15/495-mtd-core-add-get_mtd_device_by_node.patch @@ -0,0 +1,75 @@ +From 1bd1b740f208d1cf4071932cc51860d37266c402 Mon Sep 17 00:00:00 2001 +From: Bernhard Frauendienst +Date: Sat, 1 Sep 2018 00:30:11 +0200 +Subject: [PATCH 495/497] mtd: core: add get_mtd_device_by_node + +Add function to retrieve a mtd device by its OF node. Since drivers can +assign arbitrary names to mtd devices in the absence of a label +property, there is no other reliable way to retrieve a mtd device for a +given OF node. + +Signed-off-by: Bernhard Frauendienst +Reviewed-by: Miquel Raynal +--- + drivers/mtd/mtdcore.c | 38 ++++++++++++++++++++++++++++++++++++++ + include/linux/mtd/mtd.h | 2 ++ + 2 files changed, 40 insertions(+) + +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -1046,6 +1046,44 @@ out_unlock: + } + EXPORT_SYMBOL_GPL(get_mtd_device_nm); + ++/** ++ * get_mtd_device_by_node - obtain a validated handle for an MTD device ++ * by of_node ++ * @of_node: OF node of MTD device to open ++ * ++ * This function returns MTD device description structure in case of ++ * success and an error code in case of failure. ++ */ ++struct mtd_info *get_mtd_device_by_node(const struct device_node *of_node) ++{ ++ int err = -ENODEV; ++ struct mtd_info *mtd = NULL, *other; ++ ++ mutex_lock(&mtd_table_mutex); ++ ++ mtd_for_each_device(other) { ++ if (of_node == other->dev.of_node) { ++ mtd = other; ++ break; ++ } ++ } ++ ++ if (!mtd) ++ goto out_unlock; ++ ++ err = __get_mtd_device(mtd); ++ if (err) ++ goto out_unlock; ++ ++ mutex_unlock(&mtd_table_mutex); ++ return mtd; ++ ++out_unlock: ++ mutex_unlock(&mtd_table_mutex); ++ return ERR_PTR(err); ++} ++EXPORT_SYMBOL_GPL(get_mtd_device_by_node); ++ + void put_mtd_device(struct mtd_info *mtd) + { + mutex_lock(&mtd_table_mutex); +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -698,6 +698,8 @@ extern struct mtd_info *get_mtd_device(s + extern int __get_mtd_device(struct mtd_info *mtd); + extern void __put_mtd_device(struct mtd_info *mtd); + extern struct mtd_info *get_mtd_device_nm(const char *name); ++extern struct mtd_info *get_mtd_device_by_node( ++ const struct device_node *of_node); + extern void put_mtd_device(struct mtd_info *mtd); + + static inline uint64_t mtdpart_get_offset(const struct mtd_info *mtd) diff --git a/target/linux/generic/pending-5.15/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-5.15/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch new file mode 100644 index 0000000000..01f3b9ec2d --- /dev/null +++ b/target/linux/generic/pending-5.15/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch @@ -0,0 +1,52 @@ +From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001 +From: Bernhard Frauendienst +Date: Wed, 5 Sep 2018 01:32:51 +0200 +Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices + +Document virtual mtd-concat device bindings. + +Signed-off-by: Bernhard Frauendienst +--- + .../devicetree/bindings/mtd/mtd-concat.txt | 36 +++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt +@@ -0,0 +1,36 @@ ++Virtual MTD concat device ++ ++Requires properties: ++- devices: list of phandles to mtd nodes that should be concatenated ++ ++Example: ++ ++&spi { ++ flash0: flash@0 { ++ ... ++ }; ++ flash1: flash@1 { ++ ... ++ }; ++}; ++ ++flash { ++ compatible = "mtd-concat"; ++ ++ devices = <&flash0 &flash1>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ ++ partition@0 { ++ label = "boot"; ++ reg = <0x0000000 0x0040000>; ++ read-only; ++ }; ++ ++ partition@40000 { ++ label = "firmware"; ++ reg = <0x0040000 0x1fc0000>; ++ }; ++ } ++} diff --git a/target/linux/generic/pending-5.15/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-5.15/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch new file mode 100644 index 0000000000..058cab09e5 --- /dev/null +++ b/target/linux/generic/pending-5.15/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch @@ -0,0 +1,216 @@ +From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001 +From: Bernhard Frauendienst +Date: Sat, 25 Aug 2018 12:35:22 +0200 +Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices + +Some mtd drivers like physmap variants have support for concatenating +multiple mtd devices, but there is no generic way to define such a +concat device from within the device tree. + +This is useful for some SoC boards that use multiple flash chips as +memory banks of a single mtd device, with partitions spanning chip +borders. + +This commit adds a driver for creating virtual mtd-concat devices. They +must have a compatible = "mtd-concat" line, and define a list of devices +to concat in the 'devices' property, for example: + +flash { + compatible = "mtd-concat"; + + devices = <&flash0 &flash1>; + + partitions { + ... + }; +}; + +The driver is added to the very end of the mtd Makefile to increase the +likelyhood of all child devices already being loaded at the time of +probing, preventing unnecessary deferred probes. + +Signed-off-by: Bernhard Frauendienst +--- + drivers/mtd/Kconfig | 2 + + drivers/mtd/Makefile | 3 + + drivers/mtd/composite/Kconfig | 12 +++ + drivers/mtd/composite/Makefile | 6 ++ + drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++ + 5 files changed, 151 insertions(+) + create mode 100644 drivers/mtd/composite/Kconfig + create mode 100644 drivers/mtd/composite/Makefile + create mode 100644 drivers/mtd/composite/virt_concat.c + +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -238,4 +238,6 @@ source "drivers/mtd/ubi/Kconfig" + + source "drivers/mtd/hyperbus/Kconfig" + ++source "drivers/mtd/composite/Kconfig" ++ + endif # MTD +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -33,3 +33,6 @@ obj-y += chips/ lpddr/ maps/ devices/ n + obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/ + obj-$(CONFIG_MTD_UBI) += ubi/ + obj-$(CONFIG_MTD_HYPERBUS) += hyperbus/ ++ ++# Composite drivers must be loaded last ++obj-y += composite/ +--- /dev/null ++++ b/drivers/mtd/composite/Kconfig +@@ -0,0 +1,12 @@ ++menu "Composite MTD device drivers" ++ depends on MTD!=n ++ ++config MTD_VIRT_CONCAT ++ tristate "Virtual concat MTD device" ++ help ++ This driver allows creation of a virtual MTD concat device, which ++ concatenates multiple underlying MTD devices to a single device. ++ This is required by some SoC boards where multiple memory banks are ++ used as one device with partitions spanning across device boundaries. ++ ++endmenu +--- /dev/null ++++ b/drivers/mtd/composite/Makefile +@@ -0,0 +1,6 @@ ++# SPDX-License-Identifier: GPL-2.0 ++# ++# linux/drivers/mtd/composite/Makefile ++# ++ ++obj-$(CONFIG_MTD_VIRT_CONCAT) += virt_concat.o +--- /dev/null ++++ b/drivers/mtd/composite/virt_concat.c +@@ -0,0 +1,128 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Virtual concat MTD device driver ++ * ++ * Copyright (C) 2018 Bernhard Frauendienst ++ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * struct of_virt_concat - platform device driver data. ++ * @cmtd the final mtd_concat device ++ * @num_devices the number of devices in @devices ++ * @devices points to an array of devices already loaded ++ */ ++struct of_virt_concat { ++ struct mtd_info *cmtd; ++ int num_devices; ++ struct mtd_info **devices; ++}; ++ ++static int virt_concat_remove(struct platform_device *pdev) ++{ ++ struct of_virt_concat *info; ++ int i; ++ ++ info = platform_get_drvdata(pdev); ++ if (!info) ++ return 0; ++ ++ // unset data for when this is called after a probe error ++ platform_set_drvdata(pdev, NULL); ++ ++ if (info->cmtd) { ++ mtd_device_unregister(info->cmtd); ++ mtd_concat_destroy(info->cmtd); ++ } ++ ++ if (info->devices) { ++ for (i = 0; i < info->num_devices; i++) ++ put_mtd_device(info->devices[i]); ++ } ++ ++ return 0; ++} ++ ++static int virt_concat_probe(struct platform_device *pdev) ++{ ++ struct device_node *node = pdev->dev.of_node; ++ struct of_phandle_iterator it; ++ struct of_virt_concat *info; ++ struct mtd_info *mtd; ++ int err = 0, count; ++ ++ count = of_count_phandle_with_args(node, "devices", NULL); ++ if (count <= 0) ++ return -EINVAL; ++ ++ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return -ENOMEM; ++ info->devices = devm_kcalloc(&pdev->dev, count, ++ sizeof(*(info->devices)), GFP_KERNEL); ++ if (!info->devices) { ++ err = -ENOMEM; ++ goto err_remove; ++ } ++ ++ platform_set_drvdata(pdev, info); ++ ++ of_for_each_phandle(&it, err, node, "devices", NULL, 0) { ++ mtd = get_mtd_device_by_node(it.node); ++ if (IS_ERR(mtd)) { ++ of_node_put(it.node); ++ err = -EPROBE_DEFER; ++ goto err_remove; ++ } ++ ++ info->devices[info->num_devices++] = mtd; ++ } ++ ++ info->cmtd = mtd_concat_create(info->devices, info->num_devices, ++ dev_name(&pdev->dev)); ++ if (!info->cmtd) { ++ err = -ENXIO; ++ goto err_remove; ++ } ++ ++ info->cmtd->dev.parent = &pdev->dev; ++ mtd_set_of_node(info->cmtd, node); ++ mtd_device_register(info->cmtd, NULL, 0); ++ ++ return 0; ++ ++err_remove: ++ virt_concat_remove(pdev); ++ ++ return err; ++} ++ ++static const struct of_device_id virt_concat_of_match[] = { ++ { .compatible = "mtd-concat", }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, virt_concat_of_match); ++ ++static struct platform_driver virt_concat_driver = { ++ .probe = virt_concat_probe, ++ .remove = virt_concat_remove, ++ .driver = { ++ .name = "virt-mtdconcat", ++ .of_match_table = virt_concat_of_match, ++ }, ++}; ++ ++module_platform_driver(virt_concat_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Bernhard Frauendienst "); ++MODULE_DESCRIPTION("Virtual concat MTD device driver"); diff --git a/target/linux/generic/pending-5.15/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch b/target/linux/generic/pending-5.15/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch new file mode 100644 index 0000000000..62e977c8d1 --- /dev/null +++ b/target/linux/generic/pending-5.15/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch @@ -0,0 +1,34 @@ +From 8bf2ce6ea4ee840b70f55a27f80e1cd308051b13 Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 27 Dec 2021 00:38:13 +0100 +Subject: [PATCH 1/2] mtd: spi-nor: locking support for MX25L6405D + +Macronix MX25L6405D supports locking with four block-protection bits. +Currently, the driver only sets three bits. If the bootloader does not +sustain the flash chip in an unlocked state, the flash might be +non-writeable. Add the corresponding flag to enable locking support with +four bits in the status register. + +Tested on Nanostation M2 XM. + +Similar to commit 7ea40b54e83b ("mtd: spi-nor: enable locking support for +MX25L12805D") + +Signed-off-by: David Bauer +Signed-off-by: Nick Hainke +--- + drivers/mtd/spi-nor/macronix.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/macronix.c ++++ b/drivers/mtd/spi-nor/macronix.c +@@ -42,7 +42,8 @@ static const struct flash_info macronix_ + { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, + { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) }, + { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, +- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) }, ++ { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K | ++ SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) }, + { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) }, + { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | diff --git a/target/linux/generic/pending-5.15/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch b/target/linux/generic/pending-5.15/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch new file mode 100644 index 0000000000..ec14f6341c --- /dev/null +++ b/target/linux/generic/pending-5.15/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch @@ -0,0 +1,30 @@ +From 245224608b5368c10407da07557e546743d3c489 Mon Sep 17 00:00:00 2001 +From: Nick Hainke +Date: Mon, 27 Dec 2021 09:33:13 +0100 +Subject: [PATCH 2/2] mtd: spi-nor: disable 16-bit-sr for macronix + +Macronix flash chips seem to consist of only one status register. +These chips will not work with the "16-bit Write Status (01h) Command". +Disable SNOR_F_HAS_16BIT_SR for all Macronix chips. + +Tested with MX25L6405D. + +Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on +lock()/unlock()") + +Signed-off-by: David Bauer +Signed-off-by: Nick Hainke +--- + drivers/mtd/spi-nor/macronix.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/spi-nor/macronix.c ++++ b/drivers/mtd/spi-nor/macronix.c +@@ -94,6 +94,7 @@ static void macronix_default_init(struct + { + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode; ++ nor->flags &= ~SNOR_F_HAS_16BIT_SR; + nor->flags |= SNOR_F_HAS_LOCK; + } + diff --git a/target/linux/generic/pending-5.15/500-fs_cdrom_dependencies.patch b/target/linux/generic/pending-5.15/500-fs_cdrom_dependencies.patch new file mode 100644 index 0000000000..0a5a3aae5d --- /dev/null +++ b/target/linux/generic/pending-5.15/500-fs_cdrom_dependencies.patch @@ -0,0 +1,40 @@ +--- a/fs/hfs/Kconfig ++++ b/fs/hfs/Kconfig +@@ -2,6 +2,7 @@ + config HFS_FS + tristate "Apple Macintosh file system support" + depends on BLOCK ++ select CDROM + select NLS + help + If you say Y here, you will be able to mount Macintosh-formatted +--- a/fs/hfsplus/Kconfig ++++ b/fs/hfsplus/Kconfig +@@ -2,6 +2,7 @@ + config HFSPLUS_FS + tristate "Apple Extended HFS file system support" + depends on BLOCK ++ select CDROM + select NLS + select NLS_UTF8 + help +--- a/fs/isofs/Kconfig ++++ b/fs/isofs/Kconfig +@@ -1,6 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0-only + config ISO9660_FS + tristate "ISO 9660 CDROM file system support" ++ select CDROM + help + This is the standard file system used on CD-ROMs. It was previously + known as "High Sierra File System" and is called "hsfs" on other +--- a/fs/udf/Kconfig ++++ b/fs/udf/Kconfig +@@ -1,6 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0-only + config UDF_FS + tristate "UDF file system support" ++ select CDROM + select CRC_ITU_T + select NLS + help diff --git a/target/linux/generic/pending-5.15/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-5.15/530-jffs2_make_lzma_available.patch new file mode 100644 index 0000000000..20483a391d --- /dev/null +++ b/target/linux/generic/pending-5.15/530-jffs2_make_lzma_available.patch @@ -0,0 +1,5180 @@ +From: Alexandros C. Couloumbis +Subject: fs: add jffs2/lzma support (not activated by default yet) + +lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2 +Signed-off-by: Alexandros C. Couloumbis +--- + fs/jffs2/Kconfig | 9 + + fs/jffs2/Makefile | 3 + + fs/jffs2/compr.c | 6 + + fs/jffs2/compr.h | 10 +- + fs/jffs2/compr_lzma.c | 128 +++ + fs/jffs2/super.c | 33 +- + include/linux/lzma.h | 62 ++ + include/linux/lzma/LzFind.h | 115 +++ + include/linux/lzma/LzHash.h | 54 + + include/linux/lzma/LzmaDec.h | 231 +++++ + include/linux/lzma/LzmaEnc.h | 80 ++ + include/linux/lzma/Types.h | 226 +++++ + include/uapi/linux/jffs2.h | 1 + + lib/Kconfig | 6 + + lib/Makefile | 12 + + lib/lzma/LzFind.c | 761 ++++++++++++++ + lib/lzma/LzmaDec.c | 999 +++++++++++++++++++ + lib/lzma/LzmaEnc.c | 2271 ++++++++++++++++++++++++++++++++++++++++++ + lib/lzma/Makefile | 7 + + 19 files changed, 5008 insertions(+), 6 deletions(-) + create mode 100644 fs/jffs2/compr_lzma.c + create mode 100644 include/linux/lzma.h + create mode 100644 include/linux/lzma/LzFind.h + create mode 100644 include/linux/lzma/LzHash.h + create mode 100644 include/linux/lzma/LzmaDec.h + create mode 100644 include/linux/lzma/LzmaEnc.h + create mode 100644 include/linux/lzma/Types.h + create mode 100644 lib/lzma/LzFind.c + create mode 100644 lib/lzma/LzmaDec.c + create mode 100644 lib/lzma/LzmaEnc.c + create mode 100644 lib/lzma/Makefile + +--- a/fs/jffs2/Kconfig ++++ b/fs/jffs2/Kconfig +@@ -136,6 +136,15 @@ config JFFS2_LZO + This feature was added in July, 2007. Say 'N' if you need + compatibility with older bootloaders or kernels. + ++config JFFS2_LZMA ++ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS ++ select LZMA_COMPRESS ++ select LZMA_DECOMPRESS ++ depends on JFFS2_FS ++ default n ++ help ++ JFFS2 wrapper to the LZMA C SDK ++ + config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS +--- a/fs/jffs2/Makefile ++++ b/fs/jffs2/Makefile +@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub + jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o + jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o + jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o ++jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o + jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o ++ ++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma +--- a/fs/jffs2/compr.c ++++ b/fs/jffs2/compr.c +@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void) + #ifdef CONFIG_JFFS2_LZO + jffs2_lzo_init(); + #endif ++#ifdef CONFIG_JFFS2_LZMA ++ jffs2_lzma_init(); ++#endif + /* Setting default compression mode */ + #ifdef CONFIG_JFFS2_CMODE_NONE + jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; +@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void) + int jffs2_compressors_exit(void) + { + /* Unregistering compressors */ ++#ifdef CONFIG_JFFS2_LZMA ++ jffs2_lzma_exit(); ++#endif + #ifdef CONFIG_JFFS2_LZO + jffs2_lzo_exit(); + #endif +--- a/fs/jffs2/compr.h ++++ b/fs/jffs2/compr.h +@@ -29,9 +29,9 @@ + #define JFFS2_DYNRUBIN_PRIORITY 20 + #define JFFS2_LZARI_PRIORITY 30 + #define JFFS2_RTIME_PRIORITY 50 +-#define JFFS2_ZLIB_PRIORITY 60 +-#define JFFS2_LZO_PRIORITY 80 +- ++#define JFFS2_LZMA_PRIORITY 70 ++#define JFFS2_ZLIB_PRIORITY 80 ++#define JFFS2_LZO_PRIORITY 90 + + #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ + #define JFFS2_DYNRUBIN_DISABLED /* for decompression */ +@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void); + int jffs2_lzo_init(void); + void jffs2_lzo_exit(void); + #endif ++#ifdef CONFIG_JFFS2_LZMA ++int jffs2_lzma_init(void); ++void jffs2_lzma_exit(void); ++#endif + + #endif /* __JFFS2_COMPR_H__ */ +--- /dev/null ++++ b/fs/jffs2/compr_lzma.c +@@ -0,0 +1,128 @@ ++/* ++ * JFFS2 -- Journalling Flash File System, Version 2. ++ * ++ * For licensing information, see the file 'LICENCE' in this directory. ++ * ++ * JFFS2 wrapper to the LZMA C SDK ++ * ++ */ ++ ++#include ++#include "compr.h" ++ ++#ifdef __KERNEL__ ++ static DEFINE_MUTEX(deflate_mutex); ++#endif ++ ++CLzmaEncHandle *p; ++Byte propsEncoded[LZMA_PROPS_SIZE]; ++SizeT propsSize = sizeof(propsEncoded); ++ ++STATIC void lzma_free_workspace(void) ++{ ++ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc); ++} ++ ++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props) ++{ ++ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL) ++ { ++ PRINT_ERROR("Failed to allocate lzma deflate workspace\n"); ++ return -ENOMEM; ++ } ++ ++ if (LzmaEnc_SetProps(p, props) != SZ_OK) ++ { ++ lzma_free_workspace(); ++ return -1; ++ } ++ ++ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK) ++ { ++ lzma_free_workspace(); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out, ++ uint32_t *sourcelen, uint32_t *dstlen) ++{ ++ SizeT compress_size = (SizeT)(*dstlen); ++ int ret; ++ ++ #ifdef __KERNEL__ ++ mutex_lock(&deflate_mutex); ++ #endif ++ ++ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen, ++ 0, NULL, &lzma_alloc, &lzma_alloc); ++ ++ #ifdef __KERNEL__ ++ mutex_unlock(&deflate_mutex); ++ #endif ++ ++ if (ret != SZ_OK) ++ return -1; ++ ++ *dstlen = (uint32_t)compress_size; ++ ++ return 0; ++} ++ ++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out, ++ uint32_t srclen, uint32_t destlen) ++{ ++ int ret; ++ SizeT dl = (SizeT)destlen; ++ SizeT sl = (SizeT)srclen; ++ ELzmaStatus status; ++ ++ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded, ++ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc); ++ ++ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen) ++ return -1; ++ ++ return 0; ++} ++ ++static struct jffs2_compressor jffs2_lzma_comp = { ++ .priority = JFFS2_LZMA_PRIORITY, ++ .name = "lzma", ++ .compr = JFFS2_COMPR_LZMA, ++ .compress = &jffs2_lzma_compress, ++ .decompress = &jffs2_lzma_decompress, ++ .disabled = 0, ++}; ++ ++int INIT jffs2_lzma_init(void) ++{ ++ int ret; ++ CLzmaEncProps props; ++ LzmaEncProps_Init(&props); ++ ++ props.dictSize = LZMA_BEST_DICT(0x2000); ++ props.level = LZMA_BEST_LEVEL; ++ props.lc = LZMA_BEST_LC; ++ props.lp = LZMA_BEST_LP; ++ props.pb = LZMA_BEST_PB; ++ props.fb = LZMA_BEST_FB; ++ ++ ret = lzma_alloc_workspace(&props); ++ if (ret < 0) ++ return ret; ++ ++ ret = jffs2_register_compressor(&jffs2_lzma_comp); ++ if (ret) ++ lzma_free_workspace(); ++ ++ return ret; ++} ++ ++void jffs2_lzma_exit(void) ++{ ++ jffs2_unregister_compressor(&jffs2_lzma_comp); ++ lzma_free_workspace(); ++} +--- a/fs/jffs2/super.c ++++ b/fs/jffs2/super.c +@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void) + BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68); + BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32); + +- pr_info("version 2.2." ++ pr_info("version 2.2" + #ifdef CONFIG_JFFS2_FS_WRITEBUFFER + " (NAND)" + #endif + #ifdef CONFIG_JFFS2_SUMMARY +- " (SUMMARY) " ++ " (SUMMARY)" + #endif +- " © 2001-2006 Red Hat, Inc.\n"); ++#ifdef CONFIG_JFFS2_ZLIB ++ " (ZLIB)" ++#endif ++#ifdef CONFIG_JFFS2_LZO ++ " (LZO)" ++#endif ++#ifdef CONFIG_JFFS2_LZMA ++ " (LZMA)" ++#endif ++#ifdef CONFIG_JFFS2_RTIME ++ " (RTIME)" ++#endif ++#ifdef CONFIG_JFFS2_RUBIN ++ " (RUBIN)" ++#endif ++#ifdef CONFIG_JFFS2_CMODE_NONE ++ " (CMODE_NONE)" ++#endif ++#ifdef CONFIG_JFFS2_CMODE_PRIORITY ++ " (CMODE_PRIORITY)" ++#endif ++#ifdef CONFIG_JFFS2_CMODE_SIZE ++ " (CMODE_SIZE)" ++#endif ++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO ++ " (CMODE_FAVOURLZO)" ++#endif ++ " (c) 2001-2006 Red Hat, Inc.\n"); + + jffs2_inode_cachep = kmem_cache_create("jffs2_i", + sizeof(struct jffs2_inode_info), +--- /dev/null ++++ b/include/linux/lzma.h +@@ -0,0 +1,62 @@ ++#ifndef __LZMA_H__ ++#define __LZMA_H__ ++ ++#ifdef __KERNEL__ ++ #include ++ #include ++ #include ++ #include ++ #include ++ #define LZMA_MALLOC vmalloc ++ #define LZMA_FREE vfree ++ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg) ++ #define INIT __init ++ #define STATIC static ++#else ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #ifndef PAGE_SIZE ++ extern int page_size; ++ #define PAGE_SIZE page_size ++ #endif ++ #define LZMA_MALLOC malloc ++ #define LZMA_FREE free ++ #define PRINT_ERROR(msg) fprintf(stderr, msg) ++ #define INIT ++ #define STATIC ++#endif ++ ++#include "lzma/LzmaDec.h" ++#include "lzma/LzmaEnc.h" ++ ++#define LZMA_BEST_LEVEL (9) ++#define LZMA_BEST_LC (0) ++#define LZMA_BEST_LP (0) ++#define LZMA_BEST_PB (0) ++#define LZMA_BEST_FB (273) ++ ++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2) ++ ++static void *p_lzma_malloc(void *p, size_t size) ++{ ++ if (size == 0) ++ return NULL; ++ ++ return LZMA_MALLOC(size); ++} ++ ++static void p_lzma_free(void *p, void *address) ++{ ++ if (address != NULL) ++ LZMA_FREE(address); ++} ++ ++static ISzAlloc lzma_alloc = { .Alloc = p_lzma_malloc, .Free = p_lzma_free }; ++ ++#endif +--- /dev/null ++++ b/include/linux/lzma/LzFind.h +@@ -0,0 +1,115 @@ ++/* LzFind.h -- Match finder for LZ algorithms ++2009-04-22 : Igor Pavlov : Public domain */ ++ ++#ifndef __LZ_FIND_H ++#define __LZ_FIND_H ++ ++#include "Types.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++typedef UInt32 CLzRef; ++ ++typedef struct _CMatchFinder ++{ ++ Byte *buffer; ++ UInt32 pos; ++ UInt32 posLimit; ++ UInt32 streamPos; ++ UInt32 lenLimit; ++ ++ UInt32 cyclicBufferPos; ++ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */ ++ ++ UInt32 matchMaxLen; ++ CLzRef *hash; ++ CLzRef *son; ++ UInt32 hashMask; ++ UInt32 cutValue; ++ ++ Byte *bufferBase; ++ ISeqInStream *stream; ++ int streamEndWasReached; ++ ++ UInt32 blockSize; ++ UInt32 keepSizeBefore; ++ UInt32 keepSizeAfter; ++ ++ UInt32 numHashBytes; ++ int directInput; ++ size_t directInputRem; ++ int btMode; ++ int bigHash; ++ UInt32 historySize; ++ UInt32 fixedHashSize; ++ UInt32 hashSizeSum; ++ UInt32 numSons; ++ SRes result; ++ UInt32 crc[256]; ++} CMatchFinder; ++ ++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer) ++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)]) ++ ++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos) ++ ++int MatchFinder_NeedMove(CMatchFinder *p); ++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p); ++void MatchFinder_MoveBlock(CMatchFinder *p); ++void MatchFinder_ReadIfRequired(CMatchFinder *p); ++ ++void MatchFinder_Construct(CMatchFinder *p); ++ ++/* Conditions: ++ historySize <= 3 GB ++ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB ++*/ ++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, ++ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, ++ ISzAlloc *alloc); ++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc); ++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems); ++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue); ++ ++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son, ++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue, ++ UInt32 *distances, UInt32 maxLen); ++ ++/* ++Conditions: ++ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func. ++ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function ++*/ ++ ++typedef void (*Mf_Init_Func)(void *object); ++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index); ++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object); ++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object); ++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances); ++typedef void (*Mf_Skip_Func)(void *object, UInt32); ++ ++typedef struct _IMatchFinder ++{ ++ Mf_Init_Func Init; ++ Mf_GetIndexByte_Func GetIndexByte; ++ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes; ++ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos; ++ Mf_GetMatches_Func GetMatches; ++ Mf_Skip_Func Skip; ++} IMatchFinder; ++ ++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable); ++ ++void MatchFinder_Init(CMatchFinder *p); ++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); ++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances); ++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); ++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif +--- /dev/null ++++ b/include/linux/lzma/LzHash.h +@@ -0,0 +1,54 @@ ++/* LzHash.h -- HASH functions for LZ algorithms ++2009-02-07 : Igor Pavlov : Public domain */ ++ ++#ifndef __LZ_HASH_H ++#define __LZ_HASH_H ++ ++#define kHash2Size (1 << 10) ++#define kHash3Size (1 << 16) ++#define kHash4Size (1 << 20) ++ ++#define kFix3HashSize (kHash2Size) ++#define kFix4HashSize (kHash2Size + kHash3Size) ++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size) ++ ++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8); ++ ++#define HASH3_CALC { \ ++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ ++ hash2Value = temp & (kHash2Size - 1); \ ++ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; } ++ ++#define HASH4_CALC { \ ++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ ++ hash2Value = temp & (kHash2Size - 1); \ ++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ ++ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; } ++ ++#define HASH5_CALC { \ ++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ ++ hash2Value = temp & (kHash2Size - 1); \ ++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ ++ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \ ++ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \ ++ hash4Value &= (kHash4Size - 1); } ++ ++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */ ++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF; ++ ++ ++#define MT_HASH2_CALC \ ++ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1); ++ ++#define MT_HASH3_CALC { \ ++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ ++ hash2Value = temp & (kHash2Size - 1); \ ++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); } ++ ++#define MT_HASH4_CALC { \ ++ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \ ++ hash2Value = temp & (kHash2Size - 1); \ ++ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \ ++ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); } ++ ++#endif +--- /dev/null ++++ b/include/linux/lzma/LzmaDec.h +@@ -0,0 +1,231 @@ ++/* LzmaDec.h -- LZMA Decoder ++2009-02-07 : Igor Pavlov : Public domain */ ++ ++#ifndef __LZMA_DEC_H ++#define __LZMA_DEC_H ++ ++#include "Types.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/* #define _LZMA_PROB32 */ ++/* _LZMA_PROB32 can increase the speed on some CPUs, ++ but memory usage for CLzmaDec::probs will be doubled in that case */ ++ ++#ifdef _LZMA_PROB32 ++#define CLzmaProb UInt32 ++#else ++#define CLzmaProb UInt16 ++#endif ++ ++ ++/* ---------- LZMA Properties ---------- */ ++ ++#define LZMA_PROPS_SIZE 5 ++ ++typedef struct _CLzmaProps ++{ ++ unsigned lc, lp, pb; ++ UInt32 dicSize; ++} CLzmaProps; ++ ++/* LzmaProps_Decode - decodes properties ++Returns: ++ SZ_OK ++ SZ_ERROR_UNSUPPORTED - Unsupported properties ++*/ ++ ++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); ++ ++ ++/* ---------- LZMA Decoder state ---------- */ ++ ++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. ++ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ ++ ++#define LZMA_REQUIRED_INPUT_MAX 20 ++ ++typedef struct ++{ ++ CLzmaProps prop; ++ CLzmaProb *probs; ++ Byte *dic; ++ const Byte *buf; ++ UInt32 range, code; ++ SizeT dicPos; ++ SizeT dicBufSize; ++ UInt32 processedPos; ++ UInt32 checkDicSize; ++ unsigned state; ++ UInt32 reps[4]; ++ unsigned remainLen; ++ int needFlush; ++ int needInitState; ++ UInt32 numProbs; ++ unsigned tempBufSize; ++ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; ++} CLzmaDec; ++ ++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; } ++ ++void LzmaDec_Init(CLzmaDec *p); ++ ++/* There are two types of LZMA streams: ++ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. ++ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ ++ ++typedef enum ++{ ++ LZMA_FINISH_ANY, /* finish at any point */ ++ LZMA_FINISH_END /* block must be finished at the end */ ++} ELzmaFinishMode; ++ ++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! ++ ++ You must use LZMA_FINISH_END, when you know that current output buffer ++ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. ++ ++ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, ++ and output value of destLen will be less than output buffer size limit. ++ You can check status result also. ++ ++ You can use multiple checks to test data integrity after full decompression: ++ 1) Check Result and "status" variable. ++ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. ++ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. ++ You must use correct finish mode in that case. */ ++ ++typedef enum ++{ ++ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ ++ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ ++ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ ++ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ ++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ ++} ELzmaStatus; ++ ++/* ELzmaStatus is used only as output value for function call */ ++ ++ ++/* ---------- Interfaces ---------- */ ++ ++/* There are 3 levels of interfaces: ++ 1) Dictionary Interface ++ 2) Buffer Interface ++ 3) One Call Interface ++ You can select any of these interfaces, but don't mix functions from different ++ groups for same object. */ ++ ++ ++/* There are two variants to allocate state for Dictionary Interface: ++ 1) LzmaDec_Allocate / LzmaDec_Free ++ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs ++ You can use variant 2, if you set dictionary buffer manually. ++ For Buffer Interface you must always use variant 1. ++ ++LzmaDec_Allocate* can return: ++ SZ_OK ++ SZ_ERROR_MEM - Memory allocation error ++ SZ_ERROR_UNSUPPORTED - Unsupported properties ++*/ ++ ++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc); ++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc); ++ ++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc); ++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc); ++ ++/* ---------- Dictionary Interface ---------- */ ++ ++/* You can use it, if you want to eliminate the overhead for data copying from ++ dictionary to some other external buffer. ++ You must work with CLzmaDec variables directly in this interface. ++ ++ STEPS: ++ LzmaDec_Constr() ++ LzmaDec_Allocate() ++ for (each new stream) ++ { ++ LzmaDec_Init() ++ while (it needs more decompression) ++ { ++ LzmaDec_DecodeToDic() ++ use data from CLzmaDec::dic and update CLzmaDec::dicPos ++ } ++ } ++ LzmaDec_Free() ++*/ ++ ++/* LzmaDec_DecodeToDic ++ ++ The decoding to internal dictionary buffer (CLzmaDec::dic). ++ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! ++ ++finishMode: ++ It has meaning only if the decoding reaches output limit (dicLimit). ++ LZMA_FINISH_ANY - Decode just dicLimit bytes. ++ LZMA_FINISH_END - Stream must be finished after dicLimit. ++ ++Returns: ++ SZ_OK ++ status: ++ LZMA_STATUS_FINISHED_WITH_MARK ++ LZMA_STATUS_NOT_FINISHED ++ LZMA_STATUS_NEEDS_MORE_INPUT ++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK ++ SZ_ERROR_DATA - Data error ++*/ ++ ++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, ++ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); ++ ++ ++/* ---------- Buffer Interface ---------- */ ++ ++/* It's zlib-like interface. ++ See LzmaDec_DecodeToDic description for information about STEPS and return results, ++ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need ++ to work with CLzmaDec variables manually. ++ ++finishMode: ++ It has meaning only if the decoding reaches output limit (*destLen). ++ LZMA_FINISH_ANY - Decode just destLen bytes. ++ LZMA_FINISH_END - Stream must be finished after (*destLen). ++*/ ++ ++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, ++ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); ++ ++ ++/* ---------- One Call Interface ---------- */ ++ ++/* LzmaDecode ++ ++finishMode: ++ It has meaning only if the decoding reaches output limit (*destLen). ++ LZMA_FINISH_ANY - Decode just destLen bytes. ++ LZMA_FINISH_END - Stream must be finished after (*destLen). ++ ++Returns: ++ SZ_OK ++ status: ++ LZMA_STATUS_FINISHED_WITH_MARK ++ LZMA_STATUS_NOT_FINISHED ++ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK ++ SZ_ERROR_DATA - Data error ++ SZ_ERROR_MEM - Memory allocation error ++ SZ_ERROR_UNSUPPORTED - Unsupported properties ++ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). ++*/ ++ ++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ++ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, ++ ELzmaStatus *status, ISzAlloc *alloc); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif +--- /dev/null ++++ b/include/linux/lzma/LzmaEnc.h +@@ -0,0 +1,80 @@ ++/* LzmaEnc.h -- LZMA Encoder ++2009-02-07 : Igor Pavlov : Public domain */ ++ ++#ifndef __LZMA_ENC_H ++#define __LZMA_ENC_H ++ ++#include "Types.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#define LZMA_PROPS_SIZE 5 ++ ++typedef struct _CLzmaEncProps ++{ ++ int level; /* 0 <= level <= 9 */ ++ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version ++ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version ++ default = (1 << 24) */ ++ int lc; /* 0 <= lc <= 8, default = 3 */ ++ int lp; /* 0 <= lp <= 4, default = 0 */ ++ int pb; /* 0 <= pb <= 4, default = 2 */ ++ int algo; /* 0 - fast, 1 - normal, default = 1 */ ++ int fb; /* 5 <= fb <= 273, default = 32 */ ++ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */ ++ int numHashBytes; /* 2, 3 or 4, default = 4 */ ++ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */ ++ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */ ++ int numThreads; /* 1 or 2, default = 2 */ ++} CLzmaEncProps; ++ ++void LzmaEncProps_Init(CLzmaEncProps *p); ++void LzmaEncProps_Normalize(CLzmaEncProps *p); ++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2); ++ ++ ++/* ---------- CLzmaEncHandle Interface ---------- */ ++ ++/* LzmaEnc_* functions can return the following exit codes: ++Returns: ++ SZ_OK - OK ++ SZ_ERROR_MEM - Memory allocation error ++ SZ_ERROR_PARAM - Incorrect paramater in props ++ SZ_ERROR_WRITE - Write callback error. ++ SZ_ERROR_PROGRESS - some break from progress callback ++ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) ++*/ ++ ++typedef void * CLzmaEncHandle; ++ ++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc); ++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig); ++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props); ++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size); ++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream, ++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); ++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, ++ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); ++ ++/* ---------- One Call Interface ---------- */ ++ ++/* LzmaEncode ++Return code: ++ SZ_OK - OK ++ SZ_ERROR_MEM - Memory allocation error ++ SZ_ERROR_PARAM - Incorrect paramater ++ SZ_ERROR_OUTPUT_EOF - output buffer overflow ++ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version) ++*/ ++ ++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, ++ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, ++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif +--- /dev/null ++++ b/include/linux/lzma/Types.h +@@ -0,0 +1,226 @@ ++/* Types.h -- Basic types ++2009-11-23 : Igor Pavlov : Public domain */ ++ ++#ifndef __7Z_TYPES_H ++#define __7Z_TYPES_H ++ ++#include ++ ++#ifdef _WIN32 ++#include ++#endif ++ ++#ifndef EXTERN_C_BEGIN ++#ifdef __cplusplus ++#define EXTERN_C_BEGIN extern "C" { ++#define EXTERN_C_END } ++#else ++#define EXTERN_C_BEGIN ++#define EXTERN_C_END ++#endif ++#endif ++ ++EXTERN_C_BEGIN ++ ++#define SZ_OK 0 ++ ++#define SZ_ERROR_DATA 1 ++#define SZ_ERROR_MEM 2 ++#define SZ_ERROR_CRC 3 ++#define SZ_ERROR_UNSUPPORTED 4 ++#define SZ_ERROR_PARAM 5 ++#define SZ_ERROR_INPUT_EOF 6 ++#define SZ_ERROR_OUTPUT_EOF 7 ++#define SZ_ERROR_READ 8 ++#define SZ_ERROR_WRITE 9 ++#define SZ_ERROR_PROGRESS 10 ++#define SZ_ERROR_FAIL 11 ++#define SZ_ERROR_THREAD 12 ++ ++#define SZ_ERROR_ARCHIVE 16 ++#define SZ_ERROR_NO_ARCHIVE 17 ++ ++typedef int SRes; ++ ++#ifdef _WIN32 ++typedef DWORD WRes; ++#else ++typedef int WRes; ++#endif ++ ++#ifndef RINOK ++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; } ++#endif ++ ++typedef unsigned char Byte; ++typedef short Int16; ++typedef unsigned short UInt16; ++ ++#ifdef _LZMA_UINT32_IS_ULONG ++typedef long Int32; ++typedef unsigned long UInt32; ++#else ++typedef int Int32; ++typedef unsigned int UInt32; ++#endif ++ ++#ifdef _SZ_NO_INT_64 ++ ++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers. ++ NOTES: Some code will work incorrectly in that case! */ ++ ++typedef long Int64; ++typedef unsigned long UInt64; ++ ++#else ++ ++#if defined(_MSC_VER) || defined(__BORLANDC__) ++typedef __int64 Int64; ++typedef unsigned __int64 UInt64; ++#else ++typedef long long int Int64; ++typedef unsigned long long int UInt64; ++#endif ++ ++#endif ++ ++#ifdef _LZMA_NO_SYSTEM_SIZE_T ++typedef UInt32 SizeT; ++#else ++typedef size_t SizeT; ++#endif ++ ++typedef int Bool; ++#define True 1 ++#define False 0 ++ ++ ++#ifdef _WIN32 ++#define MY_STD_CALL __stdcall ++#else ++#define MY_STD_CALL ++#endif ++ ++#ifdef _MSC_VER ++ ++#if _MSC_VER >= 1300 ++#define MY_NO_INLINE __declspec(noinline) ++#else ++#define MY_NO_INLINE ++#endif ++ ++#define MY_CDECL __cdecl ++#define MY_FAST_CALL __fastcall ++ ++#else ++ ++#define MY_CDECL ++#define MY_FAST_CALL ++ ++#endif ++ ++ ++/* The following interfaces use first parameter as pointer to structure */ ++ ++typedef struct ++{ ++ SRes (*Read)(void *p, void *buf, size_t *size); ++ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. ++ (output(*size) < input(*size)) is allowed */ ++} ISeqInStream; ++ ++/* it can return SZ_ERROR_INPUT_EOF */ ++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size); ++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType); ++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf); ++ ++typedef struct ++{ ++ size_t (*Write)(void *p, const void *buf, size_t size); ++ /* Returns: result - the number of actually written bytes. ++ (result < size) means error */ ++} ISeqOutStream; ++ ++typedef enum ++{ ++ SZ_SEEK_SET = 0, ++ SZ_SEEK_CUR = 1, ++ SZ_SEEK_END = 2 ++} ESzSeek; ++ ++typedef struct ++{ ++ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */ ++ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); ++} ISeekInStream; ++ ++typedef struct ++{ ++ SRes (*Look)(void *p, void **buf, size_t *size); ++ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream. ++ (output(*size) > input(*size)) is not allowed ++ (output(*size) < input(*size)) is allowed */ ++ SRes (*Skip)(void *p, size_t offset); ++ /* offset must be <= output(*size) of Look */ ++ ++ SRes (*Read)(void *p, void *buf, size_t *size); ++ /* reads directly (without buffer). It's same as ISeqInStream::Read */ ++ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin); ++} ILookInStream; ++ ++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size); ++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset); ++ ++/* reads via ILookInStream::Read */ ++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType); ++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size); ++ ++#define LookToRead_BUF_SIZE (1 << 14) ++ ++typedef struct ++{ ++ ILookInStream s; ++ ISeekInStream *realStream; ++ size_t pos; ++ size_t size; ++ Byte buf[LookToRead_BUF_SIZE]; ++} CLookToRead; ++ ++void LookToRead_CreateVTable(CLookToRead *p, int lookahead); ++void LookToRead_Init(CLookToRead *p); ++ ++typedef struct ++{ ++ ISeqInStream s; ++ ILookInStream *realStream; ++} CSecToLook; ++ ++void SecToLook_CreateVTable(CSecToLook *p); ++ ++typedef struct ++{ ++ ISeqInStream s; ++ ILookInStream *realStream; ++} CSecToRead; ++ ++void SecToRead_CreateVTable(CSecToRead *p); ++ ++typedef struct ++{ ++ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize); ++ /* Returns: result. (result != SZ_OK) means break. ++ Value (UInt64)(Int64)-1 for size means unknown value. */ ++} ICompressProgress; ++ ++typedef struct ++{ ++ void *(*Alloc)(void *p, size_t size); ++ void (*Free)(void *p, void *address); /* address can be 0 */ ++} ISzAlloc; ++ ++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size) ++#define IAlloc_Free(p, a) (p)->Free((p), a) ++ ++EXTERN_C_END ++ ++#endif +--- a/include/uapi/linux/jffs2.h ++++ b/include/uapi/linux/jffs2.h +@@ -46,6 +46,7 @@ + #define JFFS2_COMPR_DYNRUBIN 0x05 + #define JFFS2_COMPR_ZLIB 0x06 + #define JFFS2_COMPR_LZO 0x07 ++#define JFFS2_COMPR_LZMA 0x08 + /* Compatibility flags. */ + #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */ + #define JFFS2_NODE_ACCURATE 0x2000 +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -315,6 +315,12 @@ config ZSTD_DECOMPRESS + + source "lib/xz/Kconfig" + ++config LZMA_COMPRESS ++ tristate ++ ++config LZMA_DECOMPRESS ++ tristate ++ + # + # These all provide a common interface (hence the apparent duplication with + # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -136,6 +136,16 @@ CFLAGS_kobject.o += -DDEBUG + CFLAGS_kobject_uevent.o += -DDEBUG + endif + ++ifdef CONFIG_JFFS2_ZLIB ++ CONFIG_ZLIB_INFLATE:=y ++ CONFIG_ZLIB_DEFLATE:=y ++endif ++ ++ifdef CONFIG_JFFS2_LZMA ++ CONFIG_LZMA_DECOMPRESS:=y ++ CONFIG_LZMA_COMPRESS:=y ++endif ++ + obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o + CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any) + +@@ -191,6 +201,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/ + obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/ + obj-$(CONFIG_XZ_DEC) += xz/ + obj-$(CONFIG_RAID6_PQ) += raid6/ ++obj-$(CONFIG_LZMA_COMPRESS) += lzma/ ++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ + + lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o + lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +--- /dev/null ++++ b/lib/lzma/LzFind.c +@@ -0,0 +1,761 @@ ++/* LzFind.c -- Match finder for LZ algorithms ++2009-04-22 : Igor Pavlov : Public domain */ ++ ++#include ++ ++#include "LzFind.h" ++#include "LzHash.h" ++ ++#define kEmptyHashValue 0 ++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF) ++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */ ++#define kNormalizeMask (~(kNormalizeStepMin - 1)) ++#define kMaxHistorySize ((UInt32)3 << 30) ++ ++#define kStartMaxLen 3 ++ ++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc) ++{ ++ if (!p->directInput) ++ { ++ alloc->Free(alloc, p->bufferBase); ++ p->bufferBase = 0; ++ } ++} ++ ++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */ ++ ++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc) ++{ ++ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv; ++ if (p->directInput) ++ { ++ p->blockSize = blockSize; ++ return 1; ++ } ++ if (p->bufferBase == 0 || p->blockSize != blockSize) ++ { ++ LzInWindow_Free(p, alloc); ++ p->blockSize = blockSize; ++ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize); ++ } ++ return (p->bufferBase != 0); ++} ++ ++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; } ++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; } ++ ++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; } ++ ++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue) ++{ ++ p->posLimit -= subValue; ++ p->pos -= subValue; ++ p->streamPos -= subValue; ++} ++ ++static void MatchFinder_ReadBlock(CMatchFinder *p) ++{ ++ if (p->streamEndWasReached || p->result != SZ_OK) ++ return; ++ if (p->directInput) ++ { ++ UInt32 curSize = 0xFFFFFFFF - p->streamPos; ++ if (curSize > p->directInputRem) ++ curSize = (UInt32)p->directInputRem; ++ p->directInputRem -= curSize; ++ p->streamPos += curSize; ++ if (p->directInputRem == 0) ++ p->streamEndWasReached = 1; ++ return; ++ } ++ for (;;) ++ { ++ Byte *dest = p->buffer + (p->streamPos - p->pos); ++ size_t size = (p->bufferBase + p->blockSize - dest); ++ if (size == 0) ++ return; ++ p->result = p->stream->Read(p->stream, dest, &size); ++ if (p->result != SZ_OK) ++ return; ++ if (size == 0) ++ { ++ p->streamEndWasReached = 1; ++ return; ++ } ++ p->streamPos += (UInt32)size; ++ if (p->streamPos - p->pos > p->keepSizeAfter) ++ return; ++ } ++} ++ ++void MatchFinder_MoveBlock(CMatchFinder *p) ++{ ++ memmove(p->bufferBase, ++ p->buffer - p->keepSizeBefore, ++ (size_t)(p->streamPos - p->pos + p->keepSizeBefore)); ++ p->buffer = p->bufferBase + p->keepSizeBefore; ++} ++ ++int MatchFinder_NeedMove(CMatchFinder *p) ++{ ++ if (p->directInput) ++ return 0; ++ /* if (p->streamEndWasReached) return 0; */ ++ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter); ++} ++ ++void MatchFinder_ReadIfRequired(CMatchFinder *p) ++{ ++ if (p->streamEndWasReached) ++ return; ++ if (p->keepSizeAfter >= p->streamPos - p->pos) ++ MatchFinder_ReadBlock(p); ++} ++ ++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p) ++{ ++ if (MatchFinder_NeedMove(p)) ++ MatchFinder_MoveBlock(p); ++ MatchFinder_ReadBlock(p); ++} ++ ++static void MatchFinder_SetDefaultSettings(CMatchFinder *p) ++{ ++ p->cutValue = 32; ++ p->btMode = 1; ++ p->numHashBytes = 4; ++ p->bigHash = 0; ++} ++ ++#define kCrcPoly 0xEDB88320 ++ ++void MatchFinder_Construct(CMatchFinder *p) ++{ ++ UInt32 i; ++ p->bufferBase = 0; ++ p->directInput = 0; ++ p->hash = 0; ++ MatchFinder_SetDefaultSettings(p); ++ ++ for (i = 0; i < 256; i++) ++ { ++ UInt32 r = i; ++ int j; ++ for (j = 0; j < 8; j++) ++ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1)); ++ p->crc[i] = r; ++ } ++} ++ ++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc) ++{ ++ alloc->Free(alloc, p->hash); ++ p->hash = 0; ++} ++ ++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc) ++{ ++ MatchFinder_FreeThisClassMemory(p, alloc); ++ LzInWindow_Free(p, alloc); ++} ++ ++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc) ++{ ++ size_t sizeInBytes = (size_t)num * sizeof(CLzRef); ++ if (sizeInBytes / sizeof(CLzRef) != num) ++ return 0; ++ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes); ++} ++ ++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize, ++ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter, ++ ISzAlloc *alloc) ++{ ++ UInt32 sizeReserv; ++ if (historySize > kMaxHistorySize) ++ { ++ MatchFinder_Free(p, alloc); ++ return 0; ++ } ++ sizeReserv = historySize >> 1; ++ if (historySize > ((UInt32)2 << 30)) ++ sizeReserv = historySize >> 2; ++ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19); ++ ++ p->keepSizeBefore = historySize + keepAddBufferBefore + 1; ++ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter; ++ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */ ++ if (LzInWindow_Create(p, sizeReserv, alloc)) ++ { ++ UInt32 newCyclicBufferSize = historySize + 1; ++ UInt32 hs; ++ p->matchMaxLen = matchMaxLen; ++ { ++ p->fixedHashSize = 0; ++ if (p->numHashBytes == 2) ++ hs = (1 << 16) - 1; ++ else ++ { ++ hs = historySize - 1; ++ hs |= (hs >> 1); ++ hs |= (hs >> 2); ++ hs |= (hs >> 4); ++ hs |= (hs >> 8); ++ hs >>= 1; ++ hs |= 0xFFFF; /* don't change it! It's required for Deflate */ ++ if (hs > (1 << 24)) ++ { ++ if (p->numHashBytes == 3) ++ hs = (1 << 24) - 1; ++ else ++ hs >>= 1; ++ } ++ } ++ p->hashMask = hs; ++ hs++; ++ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size; ++ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size; ++ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size; ++ hs += p->fixedHashSize; ++ } ++ ++ { ++ UInt32 prevSize = p->hashSizeSum + p->numSons; ++ UInt32 newSize; ++ p->historySize = historySize; ++ p->hashSizeSum = hs; ++ p->cyclicBufferSize = newCyclicBufferSize; ++ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize); ++ newSize = p->hashSizeSum + p->numSons; ++ if (p->hash != 0 && prevSize == newSize) ++ return 1; ++ MatchFinder_FreeThisClassMemory(p, alloc); ++ p->hash = AllocRefs(newSize, alloc); ++ if (p->hash != 0) ++ { ++ p->son = p->hash + p->hashSizeSum; ++ return 1; ++ } ++ } ++ } ++ MatchFinder_Free(p, alloc); ++ return 0; ++} ++ ++static void MatchFinder_SetLimits(CMatchFinder *p) ++{ ++ UInt32 limit = kMaxValForNormalize - p->pos; ++ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos; ++ if (limit2 < limit) ++ limit = limit2; ++ limit2 = p->streamPos - p->pos; ++ if (limit2 <= p->keepSizeAfter) ++ { ++ if (limit2 > 0) ++ limit2 = 1; ++ } ++ else ++ limit2 -= p->keepSizeAfter; ++ if (limit2 < limit) ++ limit = limit2; ++ { ++ UInt32 lenLimit = p->streamPos - p->pos; ++ if (lenLimit > p->matchMaxLen) ++ lenLimit = p->matchMaxLen; ++ p->lenLimit = lenLimit; ++ } ++ p->posLimit = p->pos + limit; ++} ++ ++void MatchFinder_Init(CMatchFinder *p) ++{ ++ UInt32 i; ++ for (i = 0; i < p->hashSizeSum; i++) ++ p->hash[i] = kEmptyHashValue; ++ p->cyclicBufferPos = 0; ++ p->buffer = p->bufferBase; ++ p->pos = p->streamPos = p->cyclicBufferSize; ++ p->result = SZ_OK; ++ p->streamEndWasReached = 0; ++ MatchFinder_ReadBlock(p); ++ MatchFinder_SetLimits(p); ++} ++ ++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p) ++{ ++ return (p->pos - p->historySize - 1) & kNormalizeMask; ++} ++ ++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems) ++{ ++ UInt32 i; ++ for (i = 0; i < numItems; i++) ++ { ++ UInt32 value = items[i]; ++ if (value <= subValue) ++ value = kEmptyHashValue; ++ else ++ value -= subValue; ++ items[i] = value; ++ } ++} ++ ++static void MatchFinder_Normalize(CMatchFinder *p) ++{ ++ UInt32 subValue = MatchFinder_GetSubValue(p); ++ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons); ++ MatchFinder_ReduceOffsets(p, subValue); ++} ++ ++static void MatchFinder_CheckLimits(CMatchFinder *p) ++{ ++ if (p->pos == kMaxValForNormalize) ++ MatchFinder_Normalize(p); ++ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos) ++ MatchFinder_CheckAndMoveAndRead(p); ++ if (p->cyclicBufferPos == p->cyclicBufferSize) ++ p->cyclicBufferPos = 0; ++ MatchFinder_SetLimits(p); ++} ++ ++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, ++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, ++ UInt32 *distances, UInt32 maxLen) ++{ ++ son[_cyclicBufferPos] = curMatch; ++ for (;;) ++ { ++ UInt32 delta = pos - curMatch; ++ if (cutValue-- == 0 || delta >= _cyclicBufferSize) ++ return distances; ++ { ++ const Byte *pb = cur - delta; ++ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)]; ++ if (pb[maxLen] == cur[maxLen] && *pb == *cur) ++ { ++ UInt32 len = 0; ++ while (++len != lenLimit) ++ if (pb[len] != cur[len]) ++ break; ++ if (maxLen < len) ++ { ++ *distances++ = maxLen = len; ++ *distances++ = delta - 1; ++ if (len == lenLimit) ++ return distances; ++ } ++ } ++ } ++ } ++} ++ ++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, ++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue, ++ UInt32 *distances, UInt32 maxLen) ++{ ++ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; ++ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); ++ UInt32 len0 = 0, len1 = 0; ++ for (;;) ++ { ++ UInt32 delta = pos - curMatch; ++ if (cutValue-- == 0 || delta >= _cyclicBufferSize) ++ { ++ *ptr0 = *ptr1 = kEmptyHashValue; ++ return distances; ++ } ++ { ++ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); ++ const Byte *pb = cur - delta; ++ UInt32 len = (len0 < len1 ? len0 : len1); ++ if (pb[len] == cur[len]) ++ { ++ if (++len != lenLimit && pb[len] == cur[len]) ++ while (++len != lenLimit) ++ if (pb[len] != cur[len]) ++ break; ++ if (maxLen < len) ++ { ++ *distances++ = maxLen = len; ++ *distances++ = delta - 1; ++ if (len == lenLimit) ++ { ++ *ptr1 = pair[0]; ++ *ptr0 = pair[1]; ++ return distances; ++ } ++ } ++ } ++ if (pb[len] < cur[len]) ++ { ++ *ptr1 = curMatch; ++ ptr1 = pair + 1; ++ curMatch = *ptr1; ++ len1 = len; ++ } ++ else ++ { ++ *ptr0 = curMatch; ++ ptr0 = pair; ++ curMatch = *ptr0; ++ len0 = len; ++ } ++ } ++ } ++} ++ ++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son, ++ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue) ++{ ++ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1; ++ CLzRef *ptr1 = son + (_cyclicBufferPos << 1); ++ UInt32 len0 = 0, len1 = 0; ++ for (;;) ++ { ++ UInt32 delta = pos - curMatch; ++ if (cutValue-- == 0 || delta >= _cyclicBufferSize) ++ { ++ *ptr0 = *ptr1 = kEmptyHashValue; ++ return; ++ } ++ { ++ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1); ++ const Byte *pb = cur - delta; ++ UInt32 len = (len0 < len1 ? len0 : len1); ++ if (pb[len] == cur[len]) ++ { ++ while (++len != lenLimit) ++ if (pb[len] != cur[len]) ++ break; ++ { ++ if (len == lenLimit) ++ { ++ *ptr1 = pair[0]; ++ *ptr0 = pair[1]; ++ return; ++ } ++ } ++ } ++ if (pb[len] < cur[len]) ++ { ++ *ptr1 = curMatch; ++ ptr1 = pair + 1; ++ curMatch = *ptr1; ++ len1 = len; ++ } ++ else ++ { ++ *ptr0 = curMatch; ++ ptr0 = pair; ++ curMatch = *ptr0; ++ len0 = len; ++ } ++ } ++ } ++} ++ ++#define MOVE_POS \ ++ ++p->cyclicBufferPos; \ ++ p->buffer++; \ ++ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p); ++ ++#define MOVE_POS_RET MOVE_POS return offset; ++ ++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; } ++ ++#define GET_MATCHES_HEADER2(minLen, ret_op) \ ++ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \ ++ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \ ++ cur = p->buffer; ++ ++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0) ++#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue) ++ ++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue ++ ++#define GET_MATCHES_FOOTER(offset, maxLen) \ ++ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \ ++ distances + offset, maxLen) - distances); MOVE_POS_RET; ++ ++#define SKIP_FOOTER \ ++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS; ++ ++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 offset; ++ GET_MATCHES_HEADER(2) ++ HASH2_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ offset = 0; ++ GET_MATCHES_FOOTER(offset, 1) ++} ++ ++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 offset; ++ GET_MATCHES_HEADER(3) ++ HASH_ZIP_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ offset = 0; ++ GET_MATCHES_FOOTER(offset, 2) ++} ++ ++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 hash2Value, delta2, maxLen, offset; ++ GET_MATCHES_HEADER(3) ++ ++ HASH3_CALC; ++ ++ delta2 = p->pos - p->hash[hash2Value]; ++ curMatch = p->hash[kFix3HashSize + hashValue]; ++ ++ p->hash[hash2Value] = ++ p->hash[kFix3HashSize + hashValue] = p->pos; ++ ++ ++ maxLen = 2; ++ offset = 0; ++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) ++ { ++ for (; maxLen != lenLimit; maxLen++) ++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) ++ break; ++ distances[0] = maxLen; ++ distances[1] = delta2 - 1; ++ offset = 2; ++ if (maxLen == lenLimit) ++ { ++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); ++ MOVE_POS_RET; ++ } ++ } ++ GET_MATCHES_FOOTER(offset, maxLen) ++} ++ ++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; ++ GET_MATCHES_HEADER(4) ++ ++ HASH4_CALC; ++ ++ delta2 = p->pos - p->hash[ hash2Value]; ++ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; ++ curMatch = p->hash[kFix4HashSize + hashValue]; ++ ++ p->hash[ hash2Value] = ++ p->hash[kFix3HashSize + hash3Value] = ++ p->hash[kFix4HashSize + hashValue] = p->pos; ++ ++ maxLen = 1; ++ offset = 0; ++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) ++ { ++ distances[0] = maxLen = 2; ++ distances[1] = delta2 - 1; ++ offset = 2; ++ } ++ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) ++ { ++ maxLen = 3; ++ distances[offset + 1] = delta3 - 1; ++ offset += 2; ++ delta2 = delta3; ++ } ++ if (offset != 0) ++ { ++ for (; maxLen != lenLimit; maxLen++) ++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) ++ break; ++ distances[offset - 2] = maxLen; ++ if (maxLen == lenLimit) ++ { ++ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); ++ MOVE_POS_RET; ++ } ++ } ++ if (maxLen < 3) ++ maxLen = 3; ++ GET_MATCHES_FOOTER(offset, maxLen) ++} ++ ++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset; ++ GET_MATCHES_HEADER(4) ++ ++ HASH4_CALC; ++ ++ delta2 = p->pos - p->hash[ hash2Value]; ++ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value]; ++ curMatch = p->hash[kFix4HashSize + hashValue]; ++ ++ p->hash[ hash2Value] = ++ p->hash[kFix3HashSize + hash3Value] = ++ p->hash[kFix4HashSize + hashValue] = p->pos; ++ ++ maxLen = 1; ++ offset = 0; ++ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur) ++ { ++ distances[0] = maxLen = 2; ++ distances[1] = delta2 - 1; ++ offset = 2; ++ } ++ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur) ++ { ++ maxLen = 3; ++ distances[offset + 1] = delta3 - 1; ++ offset += 2; ++ delta2 = delta3; ++ } ++ if (offset != 0) ++ { ++ for (; maxLen != lenLimit; maxLen++) ++ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen]) ++ break; ++ distances[offset - 2] = maxLen; ++ if (maxLen == lenLimit) ++ { ++ p->son[p->cyclicBufferPos] = curMatch; ++ MOVE_POS_RET; ++ } ++ } ++ if (maxLen < 3) ++ maxLen = 3; ++ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), ++ distances + offset, maxLen) - (distances)); ++ MOVE_POS_RET ++} ++ ++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances) ++{ ++ UInt32 offset; ++ GET_MATCHES_HEADER(3) ++ HASH_ZIP_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p), ++ distances, 2) - (distances)); ++ MOVE_POS_RET ++} ++ ++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ SKIP_HEADER(2) ++ HASH2_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ SKIP_FOOTER ++ } ++ while (--num != 0); ++} ++ ++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ SKIP_HEADER(3) ++ HASH_ZIP_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ SKIP_FOOTER ++ } ++ while (--num != 0); ++} ++ ++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ UInt32 hash2Value; ++ SKIP_HEADER(3) ++ HASH3_CALC; ++ curMatch = p->hash[kFix3HashSize + hashValue]; ++ p->hash[hash2Value] = ++ p->hash[kFix3HashSize + hashValue] = p->pos; ++ SKIP_FOOTER ++ } ++ while (--num != 0); ++} ++ ++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ UInt32 hash2Value, hash3Value; ++ SKIP_HEADER(4) ++ HASH4_CALC; ++ curMatch = p->hash[kFix4HashSize + hashValue]; ++ p->hash[ hash2Value] = ++ p->hash[kFix3HashSize + hash3Value] = p->pos; ++ p->hash[kFix4HashSize + hashValue] = p->pos; ++ SKIP_FOOTER ++ } ++ while (--num != 0); ++} ++ ++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ UInt32 hash2Value, hash3Value; ++ SKIP_HEADER(4) ++ HASH4_CALC; ++ curMatch = p->hash[kFix4HashSize + hashValue]; ++ p->hash[ hash2Value] = ++ p->hash[kFix3HashSize + hash3Value] = ++ p->hash[kFix4HashSize + hashValue] = p->pos; ++ p->son[p->cyclicBufferPos] = curMatch; ++ MOVE_POS ++ } ++ while (--num != 0); ++} ++ ++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num) ++{ ++ do ++ { ++ SKIP_HEADER(3) ++ HASH_ZIP_CALC; ++ curMatch = p->hash[hashValue]; ++ p->hash[hashValue] = p->pos; ++ p->son[p->cyclicBufferPos] = curMatch; ++ MOVE_POS ++ } ++ while (--num != 0); ++} ++ ++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable) ++{ ++ vTable->Init = (Mf_Init_Func)MatchFinder_Init; ++ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte; ++ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes; ++ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos; ++ if (!p->btMode) ++ { ++ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches; ++ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip; ++ } ++ else if (p->numHashBytes == 2) ++ { ++ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches; ++ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip; ++ } ++ else if (p->numHashBytes == 3) ++ { ++ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches; ++ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip; ++ } ++ else ++ { ++ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches; ++ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip; ++ } ++} +--- /dev/null ++++ b/lib/lzma/LzmaDec.c +@@ -0,0 +1,999 @@ ++/* LzmaDec.c -- LZMA Decoder ++2009-09-20 : Igor Pavlov : Public domain */ ++ ++#include "LzmaDec.h" ++ ++#include ++ ++#define kNumTopBits 24 ++#define kTopValue ((UInt32)1 << kNumTopBits) ++ ++#define kNumBitModelTotalBits 11 ++#define kBitModelTotal (1 << kNumBitModelTotalBits) ++#define kNumMoveBits 5 ++ ++#define RC_INIT_SIZE 5 ++ ++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); } ++ ++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) ++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits)); ++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits)); ++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \ ++ { UPDATE_0(p); i = (i + i); A0; } else \ ++ { UPDATE_1(p); i = (i + i) + 1; A1; } ++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;) ++ ++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); } ++#define TREE_DECODE(probs, limit, i) \ ++ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; } ++ ++/* #define _LZMA_SIZE_OPT */ ++ ++#ifdef _LZMA_SIZE_OPT ++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i) ++#else ++#define TREE_6_DECODE(probs, i) \ ++ { i = 1; \ ++ TREE_GET_BIT(probs, i); \ ++ TREE_GET_BIT(probs, i); \ ++ TREE_GET_BIT(probs, i); \ ++ TREE_GET_BIT(probs, i); \ ++ TREE_GET_BIT(probs, i); \ ++ TREE_GET_BIT(probs, i); \ ++ i -= 0x40; } ++#endif ++ ++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); } ++ ++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound) ++#define UPDATE_0_CHECK range = bound; ++#define UPDATE_1_CHECK range -= bound; code -= bound; ++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \ ++ { UPDATE_0_CHECK; i = (i + i); A0; } else \ ++ { UPDATE_1_CHECK; i = (i + i) + 1; A1; } ++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;) ++#define TREE_DECODE_CHECK(probs, limit, i) \ ++ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; } ++ ++ ++#define kNumPosBitsMax 4 ++#define kNumPosStatesMax (1 << kNumPosBitsMax) ++ ++#define kLenNumLowBits 3 ++#define kLenNumLowSymbols (1 << kLenNumLowBits) ++#define kLenNumMidBits 3 ++#define kLenNumMidSymbols (1 << kLenNumMidBits) ++#define kLenNumHighBits 8 ++#define kLenNumHighSymbols (1 << kLenNumHighBits) ++ ++#define LenChoice 0 ++#define LenChoice2 (LenChoice + 1) ++#define LenLow (LenChoice2 + 1) ++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) ++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) ++#define kNumLenProbs (LenHigh + kLenNumHighSymbols) ++ ++ ++#define kNumStates 12 ++#define kNumLitStates 7 ++ ++#define kStartPosModelIndex 4 ++#define kEndPosModelIndex 14 ++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) ++ ++#define kNumPosSlotBits 6 ++#define kNumLenToPosStates 4 ++ ++#define kNumAlignBits 4 ++#define kAlignTableSize (1 << kNumAlignBits) ++ ++#define kMatchMinLen 2 ++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) ++ ++#define IsMatch 0 ++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) ++#define IsRepG0 (IsRep + kNumStates) ++#define IsRepG1 (IsRepG0 + kNumStates) ++#define IsRepG2 (IsRepG1 + kNumStates) ++#define IsRep0Long (IsRepG2 + kNumStates) ++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) ++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) ++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) ++#define LenCoder (Align + kAlignTableSize) ++#define RepLenCoder (LenCoder + kNumLenProbs) ++#define Literal (RepLenCoder + kNumLenProbs) ++ ++#define LZMA_BASE_SIZE 1846 ++#define LZMA_LIT_SIZE 768 ++ ++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp))) ++ ++#if Literal != LZMA_BASE_SIZE ++StopCompilingDueBUG ++#endif ++ ++#define LZMA_DIC_MIN (1 << 12) ++ ++/* First LZMA-symbol is always decoded. ++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization ++Out: ++ Result: ++ SZ_OK - OK ++ SZ_ERROR_DATA - Error ++ p->remainLen: ++ < kMatchSpecLenStart : normal remain ++ = kMatchSpecLenStart : finished ++ = kMatchSpecLenStart + 1 : Flush marker ++ = kMatchSpecLenStart + 2 : State Init Marker ++*/ ++ ++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit) ++{ ++ CLzmaProb *probs = p->probs; ++ ++ unsigned state = p->state; ++ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3]; ++ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1; ++ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1; ++ unsigned lc = p->prop.lc; ++ ++ Byte *dic = p->dic; ++ SizeT dicBufSize = p->dicBufSize; ++ SizeT dicPos = p->dicPos; ++ ++ UInt32 processedPos = p->processedPos; ++ UInt32 checkDicSize = p->checkDicSize; ++ unsigned len = 0; ++ ++ const Byte *buf = p->buf; ++ UInt32 range = p->range; ++ UInt32 code = p->code; ++ ++ do ++ { ++ CLzmaProb *prob; ++ UInt32 bound; ++ unsigned ttt; ++ unsigned posState = processedPos & pbMask; ++ ++ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; ++ IF_BIT_0(prob) ++ { ++ unsigned symbol; ++ UPDATE_0(prob); ++ prob = probs + Literal; ++ if (checkDicSize != 0 || processedPos != 0) ++ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) + ++ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc)))); ++ ++ if (state < kNumLitStates) ++ { ++ state -= (state < 4) ? state : 3; ++ symbol = 1; ++ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100); ++ } ++ else ++ { ++ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; ++ unsigned offs = 0x100; ++ state -= (state < 10) ? 3 : 6; ++ symbol = 1; ++ do ++ { ++ unsigned bit; ++ CLzmaProb *probLit; ++ matchByte <<= 1; ++ bit = (matchByte & offs); ++ probLit = prob + offs + bit + symbol; ++ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit) ++ } ++ while (symbol < 0x100); ++ } ++ dic[dicPos++] = (Byte)symbol; ++ processedPos++; ++ continue; ++ } ++ else ++ { ++ UPDATE_1(prob); ++ prob = probs + IsRep + state; ++ IF_BIT_0(prob) ++ { ++ UPDATE_0(prob); ++ state += kNumStates; ++ prob = probs + LenCoder; ++ } ++ else ++ { ++ UPDATE_1(prob); ++ if (checkDicSize == 0 && processedPos == 0) ++ return SZ_ERROR_DATA; ++ prob = probs + IsRepG0 + state; ++ IF_BIT_0(prob) ++ { ++ UPDATE_0(prob); ++ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; ++ IF_BIT_0(prob) ++ { ++ UPDATE_0(prob); ++ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; ++ dicPos++; ++ processedPos++; ++ state = state < kNumLitStates ? 9 : 11; ++ continue; ++ } ++ UPDATE_1(prob); ++ } ++ else ++ { ++ UInt32 distance; ++ UPDATE_1(prob); ++ prob = probs + IsRepG1 + state; ++ IF_BIT_0(prob) ++ { ++ UPDATE_0(prob); ++ distance = rep1; ++ } ++ else ++ { ++ UPDATE_1(prob); ++ prob = probs + IsRepG2 + state; ++ IF_BIT_0(prob) ++ { ++ UPDATE_0(prob); ++ distance = rep2; ++ } ++ else ++ { ++ UPDATE_1(prob); ++ distance = rep3; ++ rep3 = rep2; ++ } ++ rep2 = rep1; ++ } ++ rep1 = rep0; ++ rep0 = distance; ++ } ++ state = state < kNumLitStates ? 8 : 11; ++ prob = probs + RepLenCoder; ++ } ++ { ++ unsigned limit, offset; ++ CLzmaProb *probLen = prob + LenChoice; ++ IF_BIT_0(probLen) ++ { ++ UPDATE_0(probLen); ++ probLen = prob + LenLow + (posState << kLenNumLowBits); ++ offset = 0; ++ limit = (1 << kLenNumLowBits); ++ } ++ else ++ { ++ UPDATE_1(probLen); ++ probLen = prob + LenChoice2; ++ IF_BIT_0(probLen) ++ { ++ UPDATE_0(probLen); ++ probLen = prob + LenMid + (posState << kLenNumMidBits); ++ offset = kLenNumLowSymbols; ++ limit = (1 << kLenNumMidBits); ++ } ++ else ++ { ++ UPDATE_1(probLen); ++ probLen = prob + LenHigh; ++ offset = kLenNumLowSymbols + kLenNumMidSymbols; ++ limit = (1 << kLenNumHighBits); ++ } ++ } ++ TREE_DECODE(probLen, limit, len); ++ len += offset; ++ } ++ ++ if (state >= kNumStates) ++ { ++ UInt32 distance; ++ prob = probs + PosSlot + ++ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits); ++ TREE_6_DECODE(prob, distance); ++ if (distance >= kStartPosModelIndex) ++ { ++ unsigned posSlot = (unsigned)distance; ++ int numDirectBits = (int)(((distance >> 1) - 1)); ++ distance = (2 | (distance & 1)); ++ if (posSlot < kEndPosModelIndex) ++ { ++ distance <<= numDirectBits; ++ prob = probs + SpecPos + distance - posSlot - 1; ++ { ++ UInt32 mask = 1; ++ unsigned i = 1; ++ do ++ { ++ GET_BIT2(prob + i, i, ; , distance |= mask); ++ mask <<= 1; ++ } ++ while (--numDirectBits != 0); ++ } ++ } ++ else ++ { ++ numDirectBits -= kNumAlignBits; ++ do ++ { ++ NORMALIZE ++ range >>= 1; ++ ++ { ++ UInt32 t; ++ code -= range; ++ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */ ++ distance = (distance << 1) + (t + 1); ++ code += range & t; ++ } ++ /* ++ distance <<= 1; ++ if (code >= range) ++ { ++ code -= range; ++ distance |= 1; ++ } ++ */ ++ } ++ while (--numDirectBits != 0); ++ prob = probs + Align; ++ distance <<= kNumAlignBits; ++ { ++ unsigned i = 1; ++ GET_BIT2(prob + i, i, ; , distance |= 1); ++ GET_BIT2(prob + i, i, ; , distance |= 2); ++ GET_BIT2(prob + i, i, ; , distance |= 4); ++ GET_BIT2(prob + i, i, ; , distance |= 8); ++ } ++ if (distance == (UInt32)0xFFFFFFFF) ++ { ++ len += kMatchSpecLenStart; ++ state -= kNumStates; ++ break; ++ } ++ } ++ } ++ rep3 = rep2; ++ rep2 = rep1; ++ rep1 = rep0; ++ rep0 = distance + 1; ++ if (checkDicSize == 0) ++ { ++ if (distance >= processedPos) ++ return SZ_ERROR_DATA; ++ } ++ else if (distance >= checkDicSize) ++ return SZ_ERROR_DATA; ++ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3; ++ } ++ ++ len += kMatchMinLen; ++ ++ if (limit == dicPos) ++ return SZ_ERROR_DATA; ++ { ++ SizeT rem = limit - dicPos; ++ unsigned curLen = ((rem < len) ? (unsigned)rem : len); ++ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0); ++ ++ processedPos += curLen; ++ ++ len -= curLen; ++ if (pos + curLen <= dicBufSize) ++ { ++ Byte *dest = dic + dicPos; ++ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos; ++ const Byte *lim = dest + curLen; ++ dicPos += curLen; ++ do ++ *(dest) = (Byte)*(dest + src); ++ while (++dest != lim); ++ } ++ else ++ { ++ do ++ { ++ dic[dicPos++] = dic[pos]; ++ if (++pos == dicBufSize) ++ pos = 0; ++ } ++ while (--curLen != 0); ++ } ++ } ++ } ++ } ++ while (dicPos < limit && buf < bufLimit); ++ NORMALIZE; ++ p->buf = buf; ++ p->range = range; ++ p->code = code; ++ p->remainLen = len; ++ p->dicPos = dicPos; ++ p->processedPos = processedPos; ++ p->reps[0] = rep0; ++ p->reps[1] = rep1; ++ p->reps[2] = rep2; ++ p->reps[3] = rep3; ++ p->state = state; ++ ++ return SZ_OK; ++} ++ ++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit) ++{ ++ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart) ++ { ++ Byte *dic = p->dic; ++ SizeT dicPos = p->dicPos; ++ SizeT dicBufSize = p->dicBufSize; ++ unsigned len = p->remainLen; ++ UInt32 rep0 = p->reps[0]; ++ if (limit - dicPos < len) ++ len = (unsigned)(limit - dicPos); ++ ++ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len) ++ p->checkDicSize = p->prop.dicSize; ++ ++ p->processedPos += len; ++ p->remainLen -= len; ++ while (len-- != 0) ++ { ++ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)]; ++ dicPos++; ++ } ++ p->dicPos = dicPos; ++ } ++} ++ ++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit) ++{ ++ do ++ { ++ SizeT limit2 = limit; ++ if (p->checkDicSize == 0) ++ { ++ UInt32 rem = p->prop.dicSize - p->processedPos; ++ if (limit - p->dicPos > rem) ++ limit2 = p->dicPos + rem; ++ } ++ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit)); ++ if (p->processedPos >= p->prop.dicSize) ++ p->checkDicSize = p->prop.dicSize; ++ LzmaDec_WriteRem(p, limit); ++ } ++ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart); ++ ++ if (p->remainLen > kMatchSpecLenStart) ++ { ++ p->remainLen = kMatchSpecLenStart; ++ } ++ return 0; ++} ++ ++typedef enum ++{ ++ DUMMY_ERROR, /* unexpected end of input stream */ ++ DUMMY_LIT, ++ DUMMY_MATCH, ++ DUMMY_REP ++} ELzmaDummy; ++ ++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize) ++{ ++ UInt32 range = p->range; ++ UInt32 code = p->code; ++ const Byte *bufLimit = buf + inSize; ++ CLzmaProb *probs = p->probs; ++ unsigned state = p->state; ++ ELzmaDummy res; ++ ++ { ++ CLzmaProb *prob; ++ UInt32 bound; ++ unsigned ttt; ++ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1); ++ ++ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK ++ ++ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */ ++ ++ prob = probs + Literal; ++ if (p->checkDicSize != 0 || p->processedPos != 0) ++ prob += (LZMA_LIT_SIZE * ++ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) + ++ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc)))); ++ ++ if (state < kNumLitStates) ++ { ++ unsigned symbol = 1; ++ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100); ++ } ++ else ++ { ++ unsigned matchByte = p->dic[p->dicPos - p->reps[0] + ++ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)]; ++ unsigned offs = 0x100; ++ unsigned symbol = 1; ++ do ++ { ++ unsigned bit; ++ CLzmaProb *probLit; ++ matchByte <<= 1; ++ bit = (matchByte & offs); ++ probLit = prob + offs + bit + symbol; ++ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit) ++ } ++ while (symbol < 0x100); ++ } ++ res = DUMMY_LIT; ++ } ++ else ++ { ++ unsigned len; ++ UPDATE_1_CHECK; ++ ++ prob = probs + IsRep + state; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK; ++ state = 0; ++ prob = probs + LenCoder; ++ res = DUMMY_MATCH; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ res = DUMMY_REP; ++ prob = probs + IsRepG0 + state; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK; ++ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK; ++ NORMALIZE_CHECK; ++ return DUMMY_REP; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ } ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ prob = probs + IsRepG1 + state; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ prob = probs + IsRepG2 + state; ++ IF_BIT_0_CHECK(prob) ++ { ++ UPDATE_0_CHECK; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ } ++ } ++ } ++ state = kNumStates; ++ prob = probs + RepLenCoder; ++ } ++ { ++ unsigned limit, offset; ++ CLzmaProb *probLen = prob + LenChoice; ++ IF_BIT_0_CHECK(probLen) ++ { ++ UPDATE_0_CHECK; ++ probLen = prob + LenLow + (posState << kLenNumLowBits); ++ offset = 0; ++ limit = 1 << kLenNumLowBits; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ probLen = prob + LenChoice2; ++ IF_BIT_0_CHECK(probLen) ++ { ++ UPDATE_0_CHECK; ++ probLen = prob + LenMid + (posState << kLenNumMidBits); ++ offset = kLenNumLowSymbols; ++ limit = 1 << kLenNumMidBits; ++ } ++ else ++ { ++ UPDATE_1_CHECK; ++ probLen = prob + LenHigh; ++ offset = kLenNumLowSymbols + kLenNumMidSymbols; ++ limit = 1 << kLenNumHighBits; ++ } ++ } ++ TREE_DECODE_CHECK(probLen, limit, len); ++ len += offset; ++ } ++ ++ if (state < 4) ++ { ++ unsigned posSlot; ++ prob = probs + PosSlot + ++ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << ++ kNumPosSlotBits); ++ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot); ++ if (posSlot >= kStartPosModelIndex) ++ { ++ int numDirectBits = ((posSlot >> 1) - 1); ++ ++ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */ ++ ++ if (posSlot < kEndPosModelIndex) ++ { ++ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1; ++ } ++ else ++ { ++ numDirectBits -= kNumAlignBits; ++ do ++ { ++ NORMALIZE_CHECK ++ range >>= 1; ++ code -= range & (((code - range) >> 31) - 1); ++ /* if (code >= range) code -= range; */ ++ } ++ while (--numDirectBits != 0); ++ prob = probs + Align; ++ numDirectBits = kNumAlignBits; ++ } ++ { ++ unsigned i = 1; ++ do ++ { ++ GET_BIT_CHECK(prob + i, i); ++ } ++ while (--numDirectBits != 0); ++ } ++ } ++ } ++ } ++ } ++ NORMALIZE_CHECK; ++ return res; ++} ++ ++ ++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data) ++{ ++ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]); ++ p->range = 0xFFFFFFFF; ++ p->needFlush = 0; ++} ++ ++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState) ++{ ++ p->needFlush = 1; ++ p->remainLen = 0; ++ p->tempBufSize = 0; ++ ++ if (initDic) ++ { ++ p->processedPos = 0; ++ p->checkDicSize = 0; ++ p->needInitState = 1; ++ } ++ if (initState) ++ p->needInitState = 1; ++} ++ ++void LzmaDec_Init(CLzmaDec *p) ++{ ++ p->dicPos = 0; ++ LzmaDec_InitDicAndState(p, True, True); ++} ++ ++static void LzmaDec_InitStateReal(CLzmaDec *p) ++{ ++ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp)); ++ UInt32 i; ++ CLzmaProb *probs = p->probs; ++ for (i = 0; i < numProbs; i++) ++ probs[i] = kBitModelTotal >> 1; ++ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1; ++ p->state = 0; ++ p->needInitState = 0; ++} ++ ++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen, ++ ELzmaFinishMode finishMode, ELzmaStatus *status) ++{ ++ SizeT inSize = *srcLen; ++ (*srcLen) = 0; ++ LzmaDec_WriteRem(p, dicLimit); ++ ++ *status = LZMA_STATUS_NOT_SPECIFIED; ++ ++ while (p->remainLen != kMatchSpecLenStart) ++ { ++ int checkEndMarkNow; ++ ++ if (p->needFlush != 0) ++ { ++ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--) ++ p->tempBuf[p->tempBufSize++] = *src++; ++ if (p->tempBufSize < RC_INIT_SIZE) ++ { ++ *status = LZMA_STATUS_NEEDS_MORE_INPUT; ++ return SZ_OK; ++ } ++ if (p->tempBuf[0] != 0) ++ return SZ_ERROR_DATA; ++ ++ LzmaDec_InitRc(p, p->tempBuf); ++ p->tempBufSize = 0; ++ } ++ ++ checkEndMarkNow = 0; ++ if (p->dicPos >= dicLimit) ++ { ++ if (p->remainLen == 0 && p->code == 0) ++ { ++ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK; ++ return SZ_OK; ++ } ++ if (finishMode == LZMA_FINISH_ANY) ++ { ++ *status = LZMA_STATUS_NOT_FINISHED; ++ return SZ_OK; ++ } ++ if (p->remainLen != 0) ++ { ++ *status = LZMA_STATUS_NOT_FINISHED; ++ return SZ_ERROR_DATA; ++ } ++ checkEndMarkNow = 1; ++ } ++ ++ if (p->needInitState) ++ LzmaDec_InitStateReal(p); ++ ++ if (p->tempBufSize == 0) ++ { ++ SizeT processed; ++ const Byte *bufLimit; ++ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) ++ { ++ int dummyRes = LzmaDec_TryDummy(p, src, inSize); ++ if (dummyRes == DUMMY_ERROR) ++ { ++ memcpy(p->tempBuf, src, inSize); ++ p->tempBufSize = (unsigned)inSize; ++ (*srcLen) += inSize; ++ *status = LZMA_STATUS_NEEDS_MORE_INPUT; ++ return SZ_OK; ++ } ++ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) ++ { ++ *status = LZMA_STATUS_NOT_FINISHED; ++ return SZ_ERROR_DATA; ++ } ++ bufLimit = src; ++ } ++ else ++ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX; ++ p->buf = src; ++ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0) ++ return SZ_ERROR_DATA; ++ processed = (SizeT)(p->buf - src); ++ (*srcLen) += processed; ++ src += processed; ++ inSize -= processed; ++ } ++ else ++ { ++ unsigned rem = p->tempBufSize, lookAhead = 0; ++ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize) ++ p->tempBuf[rem++] = src[lookAhead++]; ++ p->tempBufSize = rem; ++ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow) ++ { ++ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem); ++ if (dummyRes == DUMMY_ERROR) ++ { ++ (*srcLen) += lookAhead; ++ *status = LZMA_STATUS_NEEDS_MORE_INPUT; ++ return SZ_OK; ++ } ++ if (checkEndMarkNow && dummyRes != DUMMY_MATCH) ++ { ++ *status = LZMA_STATUS_NOT_FINISHED; ++ return SZ_ERROR_DATA; ++ } ++ } ++ p->buf = p->tempBuf; ++ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0) ++ return SZ_ERROR_DATA; ++ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf)); ++ (*srcLen) += lookAhead; ++ src += lookAhead; ++ inSize -= lookAhead; ++ p->tempBufSize = 0; ++ } ++ } ++ if (p->code == 0) ++ *status = LZMA_STATUS_FINISHED_WITH_MARK; ++ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA; ++} ++ ++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status) ++{ ++ SizeT outSize = *destLen; ++ SizeT inSize = *srcLen; ++ *srcLen = *destLen = 0; ++ for (;;) ++ { ++ SizeT inSizeCur = inSize, outSizeCur, dicPos; ++ ELzmaFinishMode curFinishMode; ++ SRes res; ++ if (p->dicPos == p->dicBufSize) ++ p->dicPos = 0; ++ dicPos = p->dicPos; ++ if (outSize > p->dicBufSize - dicPos) ++ { ++ outSizeCur = p->dicBufSize; ++ curFinishMode = LZMA_FINISH_ANY; ++ } ++ else ++ { ++ outSizeCur = dicPos + outSize; ++ curFinishMode = finishMode; ++ } ++ ++ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status); ++ src += inSizeCur; ++ inSize -= inSizeCur; ++ *srcLen += inSizeCur; ++ outSizeCur = p->dicPos - dicPos; ++ memcpy(dest, p->dic + dicPos, outSizeCur); ++ dest += outSizeCur; ++ outSize -= outSizeCur; ++ *destLen += outSizeCur; ++ if (res != 0) ++ return res; ++ if (outSizeCur == 0 || outSize == 0) ++ return SZ_OK; ++ } ++} ++ ++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc) ++{ ++ alloc->Free(alloc, p->probs); ++ p->probs = 0; ++} ++ ++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc) ++{ ++ alloc->Free(alloc, p->dic); ++ p->dic = 0; ++} ++ ++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc) ++{ ++ LzmaDec_FreeProbs(p, alloc); ++ LzmaDec_FreeDict(p, alloc); ++} ++ ++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size) ++{ ++ UInt32 dicSize; ++ Byte d; ++ ++ if (size < LZMA_PROPS_SIZE) ++ return SZ_ERROR_UNSUPPORTED; ++ else ++ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24); ++ ++ if (dicSize < LZMA_DIC_MIN) ++ dicSize = LZMA_DIC_MIN; ++ p->dicSize = dicSize; ++ ++ d = data[0]; ++ if (d >= (9 * 5 * 5)) ++ return SZ_ERROR_UNSUPPORTED; ++ ++ p->lc = d % 9; ++ d /= 9; ++ p->pb = d / 5; ++ p->lp = d % 5; ++ ++ return SZ_OK; ++} ++ ++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc) ++{ ++ UInt32 numProbs = LzmaProps_GetNumProbs(propNew); ++ if (p->probs == 0 || numProbs != p->numProbs) ++ { ++ LzmaDec_FreeProbs(p, alloc); ++ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb)); ++ p->numProbs = numProbs; ++ if (p->probs == 0) ++ return SZ_ERROR_MEM; ++ } ++ return SZ_OK; ++} ++ ++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) ++{ ++ CLzmaProps propNew; ++ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); ++ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); ++ p->prop = propNew; ++ return SZ_OK; ++} ++ ++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc) ++{ ++ CLzmaProps propNew; ++ SizeT dicBufSize; ++ RINOK(LzmaProps_Decode(&propNew, props, propsSize)); ++ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc)); ++ dicBufSize = propNew.dicSize; ++ if (p->dic == 0 || dicBufSize != p->dicBufSize) ++ { ++ LzmaDec_FreeDict(p, alloc); ++ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize); ++ if (p->dic == 0) ++ { ++ LzmaDec_FreeProbs(p, alloc); ++ return SZ_ERROR_MEM; ++ } ++ } ++ p->dicBufSize = dicBufSize; ++ p->prop = propNew; ++ return SZ_OK; ++} ++ ++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ++ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, ++ ELzmaStatus *status, ISzAlloc *alloc) ++{ ++ CLzmaDec p; ++ SRes res; ++ SizeT inSize = *srcLen; ++ SizeT outSize = *destLen; ++ *srcLen = *destLen = 0; ++ if (inSize < RC_INIT_SIZE) ++ return SZ_ERROR_INPUT_EOF; ++ ++ LzmaDec_Construct(&p); ++ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc); ++ if (res != 0) ++ return res; ++ p.dic = dest; ++ p.dicBufSize = outSize; ++ ++ LzmaDec_Init(&p); ++ ++ *srcLen = inSize; ++ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status); ++ ++ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT) ++ res = SZ_ERROR_INPUT_EOF; ++ ++ (*destLen) = p.dicPos; ++ LzmaDec_FreeProbs(&p, alloc); ++ return res; ++} +--- /dev/null ++++ b/lib/lzma/LzmaEnc.c +@@ -0,0 +1,2271 @@ ++/* LzmaEnc.c -- LZMA Encoder ++2009-11-24 : Igor Pavlov : Public domain */ ++ ++#include ++ ++/* #define SHOW_STAT */ ++/* #define SHOW_STAT2 */ ++ ++#if defined(SHOW_STAT) || defined(SHOW_STAT2) ++#include ++#endif ++ ++#include "LzmaEnc.h" ++ ++/* disable MT */ ++#define _7ZIP_ST ++ ++#include "LzFind.h" ++#ifndef _7ZIP_ST ++#include "LzFindMt.h" ++#endif ++ ++#ifdef SHOW_STAT ++static int ttt = 0; ++#endif ++ ++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1) ++ ++#define kBlockSize (9 << 10) ++#define kUnpackBlockSize (1 << 18) ++#define kMatchArraySize (1 << 21) ++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX) ++ ++#define kNumMaxDirectBits (31) ++ ++#define kNumTopBits 24 ++#define kTopValue ((UInt32)1 << kNumTopBits) ++ ++#define kNumBitModelTotalBits 11 ++#define kBitModelTotal (1 << kNumBitModelTotalBits) ++#define kNumMoveBits 5 ++#define kProbInitValue (kBitModelTotal >> 1) ++ ++#define kNumMoveReducingBits 4 ++#define kNumBitPriceShiftBits 4 ++#define kBitPrice (1 << kNumBitPriceShiftBits) ++ ++void LzmaEncProps_Init(CLzmaEncProps *p) ++{ ++ p->level = 5; ++ p->dictSize = p->mc = 0; ++ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1; ++ p->writeEndMark = 0; ++} ++ ++void LzmaEncProps_Normalize(CLzmaEncProps *p) ++{ ++ int level = p->level; ++ if (level < 0) level = 5; ++ p->level = level; ++ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26))); ++ if (p->lc < 0) p->lc = 3; ++ if (p->lp < 0) p->lp = 0; ++ if (p->pb < 0) p->pb = 2; ++ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1); ++ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64); ++ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1); ++ if (p->numHashBytes < 0) p->numHashBytes = 4; ++ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1); ++ if (p->numThreads < 0) ++ p->numThreads = ++ #ifndef _7ZIP_ST ++ ((p->btMode && p->algo) ? 2 : 1); ++ #else ++ 1; ++ #endif ++} ++ ++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2) ++{ ++ CLzmaEncProps props = *props2; ++ LzmaEncProps_Normalize(&props); ++ return props.dictSize; ++} ++ ++/* #define LZMA_LOG_BSR */ ++/* Define it for Intel's CPU */ ++ ++ ++#ifdef LZMA_LOG_BSR ++ ++#define kDicLogSizeMaxCompress 30 ++ ++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); } ++ ++UInt32 GetPosSlot1(UInt32 pos) ++{ ++ UInt32 res; ++ BSR2_RET(pos, res); ++ return res; ++} ++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } ++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); } ++ ++#else ++ ++#define kNumLogBits (9 + (int)sizeof(size_t) / 2) ++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7) ++ ++void LzmaEnc_FastPosInit(Byte *g_FastPos) ++{ ++ int c = 2, slotFast; ++ g_FastPos[0] = 0; ++ g_FastPos[1] = 1; ++ ++ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++) ++ { ++ UInt32 k = (1 << ((slotFast >> 1) - 1)); ++ UInt32 j; ++ for (j = 0; j < k; j++, c++) ++ g_FastPos[c] = (Byte)slotFast; ++ } ++} ++ ++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \ ++ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \ ++ res = p->g_FastPos[pos >> i] + (i * 2); } ++/* ++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \ ++ p->g_FastPos[pos >> 6] + 12 : \ ++ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; } ++*/ ++ ++#define GetPosSlot1(pos) p->g_FastPos[pos] ++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); } ++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); } ++ ++#endif ++ ++ ++#define LZMA_NUM_REPS 4 ++ ++typedef unsigned CState; ++ ++typedef struct ++{ ++ UInt32 price; ++ ++ CState state; ++ int prev1IsChar; ++ int prev2; ++ ++ UInt32 posPrev2; ++ UInt32 backPrev2; ++ ++ UInt32 posPrev; ++ UInt32 backPrev; ++ UInt32 backs[LZMA_NUM_REPS]; ++} COptimal; ++ ++#define kNumOpts (1 << 12) ++ ++#define kNumLenToPosStates 4 ++#define kNumPosSlotBits 6 ++#define kDicLogSizeMin 0 ++#define kDicLogSizeMax 32 ++#define kDistTableSizeMax (kDicLogSizeMax * 2) ++ ++ ++#define kNumAlignBits 4 ++#define kAlignTableSize (1 << kNumAlignBits) ++#define kAlignMask (kAlignTableSize - 1) ++ ++#define kStartPosModelIndex 4 ++#define kEndPosModelIndex 14 ++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex) ++ ++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) ++ ++#ifdef _LZMA_PROB32 ++#define CLzmaProb UInt32 ++#else ++#define CLzmaProb UInt16 ++#endif ++ ++#define LZMA_PB_MAX 4 ++#define LZMA_LC_MAX 8 ++#define LZMA_LP_MAX 4 ++ ++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX) ++ ++ ++#define kLenNumLowBits 3 ++#define kLenNumLowSymbols (1 << kLenNumLowBits) ++#define kLenNumMidBits 3 ++#define kLenNumMidSymbols (1 << kLenNumMidBits) ++#define kLenNumHighBits 8 ++#define kLenNumHighSymbols (1 << kLenNumHighBits) ++ ++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols) ++ ++#define LZMA_MATCH_LEN_MIN 2 ++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1) ++ ++#define kNumStates 12 ++ ++typedef struct ++{ ++ CLzmaProb choice; ++ CLzmaProb choice2; ++ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits]; ++ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits]; ++ CLzmaProb high[kLenNumHighSymbols]; ++} CLenEnc; ++ ++typedef struct ++{ ++ CLenEnc p; ++ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal]; ++ UInt32 tableSize; ++ UInt32 counters[LZMA_NUM_PB_STATES_MAX]; ++} CLenPriceEnc; ++ ++typedef struct ++{ ++ UInt32 range; ++ Byte cache; ++ UInt64 low; ++ UInt64 cacheSize; ++ Byte *buf; ++ Byte *bufLim; ++ Byte *bufBase; ++ ISeqOutStream *outStream; ++ UInt64 processed; ++ SRes res; ++} CRangeEnc; ++ ++typedef struct ++{ ++ CLzmaProb *litProbs; ++ ++ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; ++ CLzmaProb isRep[kNumStates]; ++ CLzmaProb isRepG0[kNumStates]; ++ CLzmaProb isRepG1[kNumStates]; ++ CLzmaProb isRepG2[kNumStates]; ++ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; ++ ++ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; ++ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; ++ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; ++ ++ CLenPriceEnc lenEnc; ++ CLenPriceEnc repLenEnc; ++ ++ UInt32 reps[LZMA_NUM_REPS]; ++ UInt32 state; ++} CSaveState; ++ ++typedef struct ++{ ++ IMatchFinder matchFinder; ++ void *matchFinderObj; ++ ++ #ifndef _7ZIP_ST ++ Bool mtMode; ++ CMatchFinderMt matchFinderMt; ++ #endif ++ ++ CMatchFinder matchFinderBase; ++ ++ #ifndef _7ZIP_ST ++ Byte pad[128]; ++ #endif ++ ++ UInt32 optimumEndIndex; ++ UInt32 optimumCurrentIndex; ++ ++ UInt32 longestMatchLength; ++ UInt32 numPairs; ++ UInt32 numAvail; ++ COptimal opt[kNumOpts]; ++ ++ #ifndef LZMA_LOG_BSR ++ Byte g_FastPos[1 << kNumLogBits]; ++ #endif ++ ++ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits]; ++ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1]; ++ UInt32 numFastBytes; ++ UInt32 additionalOffset; ++ UInt32 reps[LZMA_NUM_REPS]; ++ UInt32 state; ++ ++ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax]; ++ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances]; ++ UInt32 alignPrices[kAlignTableSize]; ++ UInt32 alignPriceCount; ++ ++ UInt32 distTableSize; ++ ++ unsigned lc, lp, pb; ++ unsigned lpMask, pbMask; ++ ++ CLzmaProb *litProbs; ++ ++ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX]; ++ CLzmaProb isRep[kNumStates]; ++ CLzmaProb isRepG0[kNumStates]; ++ CLzmaProb isRepG1[kNumStates]; ++ CLzmaProb isRepG2[kNumStates]; ++ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX]; ++ ++ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits]; ++ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex]; ++ CLzmaProb posAlignEncoder[1 << kNumAlignBits]; ++ ++ CLenPriceEnc lenEnc; ++ CLenPriceEnc repLenEnc; ++ ++ unsigned lclp; ++ ++ Bool fastMode; ++ ++ CRangeEnc rc; ++ ++ Bool writeEndMark; ++ UInt64 nowPos64; ++ UInt32 matchPriceCount; ++ Bool finished; ++ Bool multiThread; ++ ++ SRes result; ++ UInt32 dictSize; ++ UInt32 matchFinderCycles; ++ ++ int needInit; ++ ++ CSaveState saveState; ++} CLzmaEnc; ++ ++void LzmaEnc_SaveState(CLzmaEncHandle pp) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ CSaveState *dest = &p->saveState; ++ int i; ++ dest->lenEnc = p->lenEnc; ++ dest->repLenEnc = p->repLenEnc; ++ dest->state = p->state; ++ ++ for (i = 0; i < kNumStates; i++) ++ { ++ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); ++ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); ++ } ++ for (i = 0; i < kNumLenToPosStates; i++) ++ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); ++ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); ++ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); ++ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); ++ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); ++ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); ++ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); ++ memcpy(dest->reps, p->reps, sizeof(p->reps)); ++ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb)); ++} ++ ++void LzmaEnc_RestoreState(CLzmaEncHandle pp) ++{ ++ CLzmaEnc *dest = (CLzmaEnc *)pp; ++ const CSaveState *p = &dest->saveState; ++ int i; ++ dest->lenEnc = p->lenEnc; ++ dest->repLenEnc = p->repLenEnc; ++ dest->state = p->state; ++ ++ for (i = 0; i < kNumStates; i++) ++ { ++ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i])); ++ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i])); ++ } ++ for (i = 0; i < kNumLenToPosStates; i++) ++ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i])); ++ memcpy(dest->isRep, p->isRep, sizeof(p->isRep)); ++ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0)); ++ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1)); ++ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2)); ++ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders)); ++ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder)); ++ memcpy(dest->reps, p->reps, sizeof(p->reps)); ++ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb)); ++} ++ ++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ CLzmaEncProps props = *props2; ++ LzmaEncProps_Normalize(&props); ++ ++ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX || ++ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30)) ++ return SZ_ERROR_PARAM; ++ p->dictSize = props.dictSize; ++ p->matchFinderCycles = props.mc; ++ { ++ unsigned fb = props.fb; ++ if (fb < 5) ++ fb = 5; ++ if (fb > LZMA_MATCH_LEN_MAX) ++ fb = LZMA_MATCH_LEN_MAX; ++ p->numFastBytes = fb; ++ } ++ p->lc = props.lc; ++ p->lp = props.lp; ++ p->pb = props.pb; ++ p->fastMode = (props.algo == 0); ++ p->matchFinderBase.btMode = props.btMode; ++ { ++ UInt32 numHashBytes = 4; ++ if (props.btMode) ++ { ++ if (props.numHashBytes < 2) ++ numHashBytes = 2; ++ else if (props.numHashBytes < 4) ++ numHashBytes = props.numHashBytes; ++ } ++ p->matchFinderBase.numHashBytes = numHashBytes; ++ } ++ ++ p->matchFinderBase.cutValue = props.mc; ++ ++ p->writeEndMark = props.writeEndMark; ++ ++ #ifndef _7ZIP_ST ++ /* ++ if (newMultiThread != _multiThread) ++ { ++ ReleaseMatchFinder(); ++ _multiThread = newMultiThread; ++ } ++ */ ++ p->multiThread = (props.numThreads > 1); ++ #endif ++ ++ return SZ_OK; ++} ++ ++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5}; ++static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10}; ++static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11}; ++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11}; ++ ++#define IsCharState(s) ((s) < 7) ++ ++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1) ++ ++#define kInfinityPrice (1 << 30) ++ ++static void RangeEnc_Construct(CRangeEnc *p) ++{ ++ p->outStream = 0; ++ p->bufBase = 0; ++} ++ ++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize) ++ ++#define RC_BUF_SIZE (1 << 16) ++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc) ++{ ++ if (p->bufBase == 0) ++ { ++ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE); ++ if (p->bufBase == 0) ++ return 0; ++ p->bufLim = p->bufBase + RC_BUF_SIZE; ++ } ++ return 1; ++} ++ ++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc) ++{ ++ alloc->Free(alloc, p->bufBase); ++ p->bufBase = 0; ++} ++ ++static void RangeEnc_Init(CRangeEnc *p) ++{ ++ /* Stream.Init(); */ ++ p->low = 0; ++ p->range = 0xFFFFFFFF; ++ p->cacheSize = 1; ++ p->cache = 0; ++ ++ p->buf = p->bufBase; ++ ++ p->processed = 0; ++ p->res = SZ_OK; ++} ++ ++static void RangeEnc_FlushStream(CRangeEnc *p) ++{ ++ size_t num; ++ if (p->res != SZ_OK) ++ return; ++ num = p->buf - p->bufBase; ++ if (num != p->outStream->Write(p->outStream, p->bufBase, num)) ++ p->res = SZ_ERROR_WRITE; ++ p->processed += num; ++ p->buf = p->bufBase; ++} ++ ++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p) ++{ ++ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0) ++ { ++ Byte temp = p->cache; ++ do ++ { ++ Byte *buf = p->buf; ++ *buf++ = (Byte)(temp + (Byte)(p->low >> 32)); ++ p->buf = buf; ++ if (buf == p->bufLim) ++ RangeEnc_FlushStream(p); ++ temp = 0xFF; ++ } ++ while (--p->cacheSize != 0); ++ p->cache = (Byte)((UInt32)p->low >> 24); ++ } ++ p->cacheSize++; ++ p->low = (UInt32)p->low << 8; ++} ++ ++static void RangeEnc_FlushData(CRangeEnc *p) ++{ ++ int i; ++ for (i = 0; i < 5; i++) ++ RangeEnc_ShiftLow(p); ++} ++ ++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits) ++{ ++ do ++ { ++ p->range >>= 1; ++ p->low += p->range & (0 - ((value >> --numBits) & 1)); ++ if (p->range < kTopValue) ++ { ++ p->range <<= 8; ++ RangeEnc_ShiftLow(p); ++ } ++ } ++ while (numBits != 0); ++} ++ ++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol) ++{ ++ UInt32 ttt = *prob; ++ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt; ++ if (symbol == 0) ++ { ++ p->range = newBound; ++ ttt += (kBitModelTotal - ttt) >> kNumMoveBits; ++ } ++ else ++ { ++ p->low += newBound; ++ p->range -= newBound; ++ ttt -= ttt >> kNumMoveBits; ++ } ++ *prob = (CLzmaProb)ttt; ++ if (p->range < kTopValue) ++ { ++ p->range <<= 8; ++ RangeEnc_ShiftLow(p); ++ } ++} ++ ++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol) ++{ ++ symbol |= 0x100; ++ do ++ { ++ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1); ++ symbol <<= 1; ++ } ++ while (symbol < 0x10000); ++} ++ ++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte) ++{ ++ UInt32 offs = 0x100; ++ symbol |= 0x100; ++ do ++ { ++ matchByte <<= 1; ++ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1); ++ symbol <<= 1; ++ offs &= ~(matchByte ^ symbol); ++ } ++ while (symbol < 0x10000); ++} ++ ++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices) ++{ ++ UInt32 i; ++ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits)) ++ { ++ const int kCyclesBits = kNumBitPriceShiftBits; ++ UInt32 w = i; ++ UInt32 bitCount = 0; ++ int j; ++ for (j = 0; j < kCyclesBits; j++) ++ { ++ w = w * w; ++ bitCount <<= 1; ++ while (w >= ((UInt32)1 << 16)) ++ { ++ w >>= 1; ++ bitCount++; ++ } ++ } ++ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount); ++ } ++} ++ ++ ++#define GET_PRICE(prob, symbol) \ ++ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; ++ ++#define GET_PRICEa(prob, symbol) \ ++ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits]; ++ ++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits] ++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] ++ ++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits] ++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits] ++ ++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices) ++{ ++ UInt32 price = 0; ++ symbol |= 0x100; ++ do ++ { ++ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1); ++ symbol <<= 1; ++ } ++ while (symbol < 0x10000); ++ return price; ++} ++ ++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices) ++{ ++ UInt32 price = 0; ++ UInt32 offs = 0x100; ++ symbol |= 0x100; ++ do ++ { ++ matchByte <<= 1; ++ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1); ++ symbol <<= 1; ++ offs &= ~(matchByte ^ symbol); ++ } ++ while (symbol < 0x10000); ++ return price; ++} ++ ++ ++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) ++{ ++ UInt32 m = 1; ++ int i; ++ for (i = numBitLevels; i != 0;) ++ { ++ UInt32 bit; ++ i--; ++ bit = (symbol >> i) & 1; ++ RangeEnc_EncodeBit(rc, probs + m, bit); ++ m = (m << 1) | bit; ++ } ++} ++ ++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol) ++{ ++ UInt32 m = 1; ++ int i; ++ for (i = 0; i < numBitLevels; i++) ++ { ++ UInt32 bit = symbol & 1; ++ RangeEnc_EncodeBit(rc, probs + m, bit); ++ m = (m << 1) | bit; ++ symbol >>= 1; ++ } ++} ++ ++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) ++{ ++ UInt32 price = 0; ++ symbol |= (1 << numBitLevels); ++ while (symbol != 1) ++ { ++ price += GET_PRICEa(probs[symbol >> 1], symbol & 1); ++ symbol >>= 1; ++ } ++ return price; ++} ++ ++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices) ++{ ++ UInt32 price = 0; ++ UInt32 m = 1; ++ int i; ++ for (i = numBitLevels; i != 0; i--) ++ { ++ UInt32 bit = symbol & 1; ++ symbol >>= 1; ++ price += GET_PRICEa(probs[m], bit); ++ m = (m << 1) | bit; ++ } ++ return price; ++} ++ ++ ++static void LenEnc_Init(CLenEnc *p) ++{ ++ unsigned i; ++ p->choice = p->choice2 = kProbInitValue; ++ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++) ++ p->low[i] = kProbInitValue; ++ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++) ++ p->mid[i] = kProbInitValue; ++ for (i = 0; i < kLenNumHighSymbols; i++) ++ p->high[i] = kProbInitValue; ++} ++ ++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState) ++{ ++ if (symbol < kLenNumLowSymbols) ++ { ++ RangeEnc_EncodeBit(rc, &p->choice, 0); ++ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol); ++ } ++ else ++ { ++ RangeEnc_EncodeBit(rc, &p->choice, 1); ++ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols) ++ { ++ RangeEnc_EncodeBit(rc, &p->choice2, 0); ++ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols); ++ } ++ else ++ { ++ RangeEnc_EncodeBit(rc, &p->choice2, 1); ++ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols); ++ } ++ } ++} ++ ++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices) ++{ ++ UInt32 a0 = GET_PRICE_0a(p->choice); ++ UInt32 a1 = GET_PRICE_1a(p->choice); ++ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2); ++ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2); ++ UInt32 i = 0; ++ for (i = 0; i < kLenNumLowSymbols; i++) ++ { ++ if (i >= numSymbols) ++ return; ++ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices); ++ } ++ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++) ++ { ++ if (i >= numSymbols) ++ return; ++ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices); ++ } ++ for (; i < numSymbols; i++) ++ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices); ++} ++ ++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices) ++{ ++ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices); ++ p->counters[posState] = p->tableSize; ++} ++ ++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices) ++{ ++ UInt32 posState; ++ for (posState = 0; posState < numPosStates; posState++) ++ LenPriceEnc_UpdateTable(p, posState, ProbPrices); ++} ++ ++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices) ++{ ++ LenEnc_Encode(&p->p, rc, symbol, posState); ++ if (updatePrice) ++ if (--p->counters[posState] == 0) ++ LenPriceEnc_UpdateTable(p, posState, ProbPrices); ++} ++ ++ ++ ++ ++static void MovePos(CLzmaEnc *p, UInt32 num) ++{ ++ #ifdef SHOW_STAT ++ ttt += num; ++ printf("\n MovePos %d", num); ++ #endif ++ if (num != 0) ++ { ++ p->additionalOffset += num; ++ p->matchFinder.Skip(p->matchFinderObj, num); ++ } ++} ++ ++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes) ++{ ++ UInt32 lenRes = 0, numPairs; ++ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); ++ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches); ++ #ifdef SHOW_STAT ++ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2); ++ ttt++; ++ { ++ UInt32 i; ++ for (i = 0; i < numPairs; i += 2) ++ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]); ++ } ++ #endif ++ if (numPairs > 0) ++ { ++ lenRes = p->matches[numPairs - 2]; ++ if (lenRes == p->numFastBytes) ++ { ++ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; ++ UInt32 distance = p->matches[numPairs - 1] + 1; ++ UInt32 numAvail = p->numAvail; ++ if (numAvail > LZMA_MATCH_LEN_MAX) ++ numAvail = LZMA_MATCH_LEN_MAX; ++ { ++ const Byte *pby2 = pby - distance; ++ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++); ++ } ++ } ++ } ++ p->additionalOffset++; ++ *numDistancePairsRes = numPairs; ++ return lenRes; ++} ++ ++ ++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False; ++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False; ++#define IsShortRep(p) ((p)->backPrev == 0) ++ ++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState) ++{ ++ return ++ GET_PRICE_0(p->isRepG0[state]) + ++ GET_PRICE_0(p->isRep0Long[state][posState]); ++} ++ ++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState) ++{ ++ UInt32 price; ++ if (repIndex == 0) ++ { ++ price = GET_PRICE_0(p->isRepG0[state]); ++ price += GET_PRICE_1(p->isRep0Long[state][posState]); ++ } ++ else ++ { ++ price = GET_PRICE_1(p->isRepG0[state]); ++ if (repIndex == 1) ++ price += GET_PRICE_0(p->isRepG1[state]); ++ else ++ { ++ price += GET_PRICE_1(p->isRepG1[state]); ++ price += GET_PRICE(p->isRepG2[state], repIndex - 2); ++ } ++ } ++ return price; ++} ++ ++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState) ++{ ++ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] + ++ GetPureRepPrice(p, repIndex, state, posState); ++} ++ ++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur) ++{ ++ UInt32 posMem = p->opt[cur].posPrev; ++ UInt32 backMem = p->opt[cur].backPrev; ++ p->optimumEndIndex = cur; ++ do ++ { ++ if (p->opt[cur].prev1IsChar) ++ { ++ MakeAsChar(&p->opt[posMem]) ++ p->opt[posMem].posPrev = posMem - 1; ++ if (p->opt[cur].prev2) ++ { ++ p->opt[posMem - 1].prev1IsChar = False; ++ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2; ++ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2; ++ } ++ } ++ { ++ UInt32 posPrev = posMem; ++ UInt32 backCur = backMem; ++ ++ backMem = p->opt[posPrev].backPrev; ++ posMem = p->opt[posPrev].posPrev; ++ ++ p->opt[posPrev].backPrev = backCur; ++ p->opt[posPrev].posPrev = cur; ++ cur = posPrev; ++ } ++ } ++ while (cur != 0); ++ *backRes = p->opt[0].backPrev; ++ p->optimumCurrentIndex = p->opt[0].posPrev; ++ return p->optimumCurrentIndex; ++} ++ ++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300) ++ ++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes) ++{ ++ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur; ++ UInt32 matchPrice, repMatchPrice, normalMatchPrice; ++ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS]; ++ UInt32 *matches; ++ const Byte *data; ++ Byte curByte, matchByte; ++ if (p->optimumEndIndex != p->optimumCurrentIndex) ++ { ++ const COptimal *opt = &p->opt[p->optimumCurrentIndex]; ++ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex; ++ *backRes = opt->backPrev; ++ p->optimumCurrentIndex = opt->posPrev; ++ return lenRes; ++ } ++ p->optimumCurrentIndex = p->optimumEndIndex = 0; ++ ++ if (p->additionalOffset == 0) ++ mainLen = ReadMatchDistances(p, &numPairs); ++ else ++ { ++ mainLen = p->longestMatchLength; ++ numPairs = p->numPairs; ++ } ++ ++ numAvail = p->numAvail; ++ if (numAvail < 2) ++ { ++ *backRes = (UInt32)(-1); ++ return 1; ++ } ++ if (numAvail > LZMA_MATCH_LEN_MAX) ++ numAvail = LZMA_MATCH_LEN_MAX; ++ ++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; ++ repMaxIndex = 0; ++ for (i = 0; i < LZMA_NUM_REPS; i++) ++ { ++ UInt32 lenTest; ++ const Byte *data2; ++ reps[i] = p->reps[i]; ++ data2 = data - (reps[i] + 1); ++ if (data[0] != data2[0] || data[1] != data2[1]) ++ { ++ repLens[i] = 0; ++ continue; ++ } ++ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); ++ repLens[i] = lenTest; ++ if (lenTest > repLens[repMaxIndex]) ++ repMaxIndex = i; ++ } ++ if (repLens[repMaxIndex] >= p->numFastBytes) ++ { ++ UInt32 lenRes; ++ *backRes = repMaxIndex; ++ lenRes = repLens[repMaxIndex]; ++ MovePos(p, lenRes - 1); ++ return lenRes; ++ } ++ ++ matches = p->matches; ++ if (mainLen >= p->numFastBytes) ++ { ++ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; ++ MovePos(p, mainLen - 1); ++ return mainLen; ++ } ++ curByte = *data; ++ matchByte = *(data - (reps[0] + 1)); ++ ++ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2) ++ { ++ *backRes = (UInt32)-1; ++ return 1; ++ } ++ ++ p->opt[0].state = (CState)p->state; ++ ++ posState = (position & p->pbMask); ++ ++ { ++ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); ++ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) + ++ (!IsCharState(p->state) ? ++ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : ++ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); ++ } ++ ++ MakeAsChar(&p->opt[1]); ++ ++ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]); ++ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]); ++ ++ if (matchByte == curByte) ++ { ++ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState); ++ if (shortRepPrice < p->opt[1].price) ++ { ++ p->opt[1].price = shortRepPrice; ++ MakeAsShortRep(&p->opt[1]); ++ } ++ } ++ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]); ++ ++ if (lenEnd < 2) ++ { ++ *backRes = p->opt[1].backPrev; ++ return 1; ++ } ++ ++ p->opt[1].posPrev = 0; ++ for (i = 0; i < LZMA_NUM_REPS; i++) ++ p->opt[0].backs[i] = reps[i]; ++ ++ len = lenEnd; ++ do ++ p->opt[len--].price = kInfinityPrice; ++ while (len >= 2); ++ ++ for (i = 0; i < LZMA_NUM_REPS; i++) ++ { ++ UInt32 repLen = repLens[i]; ++ UInt32 price; ++ if (repLen < 2) ++ continue; ++ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState); ++ do ++ { ++ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2]; ++ COptimal *opt = &p->opt[repLen]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = 0; ++ opt->backPrev = i; ++ opt->prev1IsChar = False; ++ } ++ } ++ while (--repLen >= 2); ++ } ++ ++ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]); ++ ++ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2); ++ if (len <= mainLen) ++ { ++ UInt32 offs = 0; ++ while (len > matches[offs]) ++ offs += 2; ++ for (; ; len++) ++ { ++ COptimal *opt; ++ UInt32 distance = matches[offs + 1]; ++ ++ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN]; ++ UInt32 lenToPosState = GetLenToPosState(len); ++ if (distance < kNumFullDistances) ++ curAndLenPrice += p->distancesPrices[lenToPosState][distance]; ++ else ++ { ++ UInt32 slot; ++ GetPosSlot2(distance, slot); ++ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot]; ++ } ++ opt = &p->opt[len]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = 0; ++ opt->backPrev = distance + LZMA_NUM_REPS; ++ opt->prev1IsChar = False; ++ } ++ if (len == matches[offs]) ++ { ++ offs += 2; ++ if (offs == numPairs) ++ break; ++ } ++ } ++ } ++ ++ cur = 0; ++ ++ #ifdef SHOW_STAT2 ++ if (position >= 0) ++ { ++ unsigned i; ++ printf("\n pos = %4X", position); ++ for (i = cur; i <= lenEnd; i++) ++ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price); ++ } ++ #endif ++ ++ for (;;) ++ { ++ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen; ++ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice; ++ Bool nextIsChar; ++ Byte curByte, matchByte; ++ const Byte *data; ++ COptimal *curOpt; ++ COptimal *nextOpt; ++ ++ cur++; ++ if (cur == lenEnd) ++ return Backward(p, backRes, cur); ++ ++ newLen = ReadMatchDistances(p, &numPairs); ++ if (newLen >= p->numFastBytes) ++ { ++ p->numPairs = numPairs; ++ p->longestMatchLength = newLen; ++ return Backward(p, backRes, cur); ++ } ++ position++; ++ curOpt = &p->opt[cur]; ++ posPrev = curOpt->posPrev; ++ if (curOpt->prev1IsChar) ++ { ++ posPrev--; ++ if (curOpt->prev2) ++ { ++ state = p->opt[curOpt->posPrev2].state; ++ if (curOpt->backPrev2 < LZMA_NUM_REPS) ++ state = kRepNextStates[state]; ++ else ++ state = kMatchNextStates[state]; ++ } ++ else ++ state = p->opt[posPrev].state; ++ state = kLiteralNextStates[state]; ++ } ++ else ++ state = p->opt[posPrev].state; ++ if (posPrev == cur - 1) ++ { ++ if (IsShortRep(curOpt)) ++ state = kShortRepNextStates[state]; ++ else ++ state = kLiteralNextStates[state]; ++ } ++ else ++ { ++ UInt32 pos; ++ const COptimal *prevOpt; ++ if (curOpt->prev1IsChar && curOpt->prev2) ++ { ++ posPrev = curOpt->posPrev2; ++ pos = curOpt->backPrev2; ++ state = kRepNextStates[state]; ++ } ++ else ++ { ++ pos = curOpt->backPrev; ++ if (pos < LZMA_NUM_REPS) ++ state = kRepNextStates[state]; ++ else ++ state = kMatchNextStates[state]; ++ } ++ prevOpt = &p->opt[posPrev]; ++ if (pos < LZMA_NUM_REPS) ++ { ++ UInt32 i; ++ reps[0] = prevOpt->backs[pos]; ++ for (i = 1; i <= pos; i++) ++ reps[i] = prevOpt->backs[i - 1]; ++ for (; i < LZMA_NUM_REPS; i++) ++ reps[i] = prevOpt->backs[i]; ++ } ++ else ++ { ++ UInt32 i; ++ reps[0] = (pos - LZMA_NUM_REPS); ++ for (i = 1; i < LZMA_NUM_REPS; i++) ++ reps[i] = prevOpt->backs[i - 1]; ++ } ++ } ++ curOpt->state = (CState)state; ++ ++ curOpt->backs[0] = reps[0]; ++ curOpt->backs[1] = reps[1]; ++ curOpt->backs[2] = reps[2]; ++ curOpt->backs[3] = reps[3]; ++ ++ curPrice = curOpt->price; ++ nextIsChar = False; ++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; ++ curByte = *data; ++ matchByte = *(data - (reps[0] + 1)); ++ ++ posState = (position & p->pbMask); ++ ++ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]); ++ { ++ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1)); ++ curAnd1Price += ++ (!IsCharState(state) ? ++ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) : ++ LitEnc_GetPrice(probs, curByte, p->ProbPrices)); ++ } ++ ++ nextOpt = &p->opt[cur + 1]; ++ ++ if (curAnd1Price < nextOpt->price) ++ { ++ nextOpt->price = curAnd1Price; ++ nextOpt->posPrev = cur; ++ MakeAsChar(nextOpt); ++ nextIsChar = True; ++ } ++ ++ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]); ++ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]); ++ ++ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0)) ++ { ++ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState); ++ if (shortRepPrice <= nextOpt->price) ++ { ++ nextOpt->price = shortRepPrice; ++ nextOpt->posPrev = cur; ++ MakeAsShortRep(nextOpt); ++ nextIsChar = True; ++ } ++ } ++ numAvailFull = p->numAvail; ++ { ++ UInt32 temp = kNumOpts - 1 - cur; ++ if (temp < numAvailFull) ++ numAvailFull = temp; ++ } ++ ++ if (numAvailFull < 2) ++ continue; ++ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes); ++ ++ if (!nextIsChar && matchByte != curByte) /* speed optimization */ ++ { ++ /* try Literal + rep0 */ ++ UInt32 temp; ++ UInt32 lenTest2; ++ const Byte *data2 = data - (reps[0] + 1); ++ UInt32 limit = p->numFastBytes + 1; ++ if (limit > numAvailFull) ++ limit = numAvailFull; ++ ++ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++); ++ lenTest2 = temp - 1; ++ if (lenTest2 >= 2) ++ { ++ UInt32 state2 = kLiteralNextStates[state]; ++ UInt32 posStateNext = (position + 1) & p->pbMask; ++ UInt32 nextRepMatchPrice = curAnd1Price + ++ GET_PRICE_1(p->isMatch[state2][posStateNext]) + ++ GET_PRICE_1(p->isRep[state2]); ++ /* for (; lenTest2 >= 2; lenTest2--) */ ++ { ++ UInt32 curAndLenPrice; ++ COptimal *opt; ++ UInt32 offset = cur + 1 + lenTest2; ++ while (lenEnd < offset) ++ p->opt[++lenEnd].price = kInfinityPrice; ++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); ++ opt = &p->opt[offset]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = cur + 1; ++ opt->backPrev = 0; ++ opt->prev1IsChar = True; ++ opt->prev2 = False; ++ } ++ } ++ } ++ } ++ ++ startLen = 2; /* speed optimization */ ++ { ++ UInt32 repIndex; ++ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++) ++ { ++ UInt32 lenTest; ++ UInt32 lenTestTemp; ++ UInt32 price; ++ const Byte *data2 = data - (reps[repIndex] + 1); ++ if (data[0] != data2[0] || data[1] != data2[1]) ++ continue; ++ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++); ++ while (lenEnd < cur + lenTest) ++ p->opt[++lenEnd].price = kInfinityPrice; ++ lenTestTemp = lenTest; ++ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState); ++ do ++ { ++ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2]; ++ COptimal *opt = &p->opt[cur + lenTest]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = cur; ++ opt->backPrev = repIndex; ++ opt->prev1IsChar = False; ++ } ++ } ++ while (--lenTest >= 2); ++ lenTest = lenTestTemp; ++ ++ if (repIndex == 0) ++ startLen = lenTest + 1; ++ ++ /* if (_maxMode) */ ++ { ++ UInt32 lenTest2 = lenTest + 1; ++ UInt32 limit = lenTest2 + p->numFastBytes; ++ UInt32 nextRepMatchPrice; ++ if (limit > numAvailFull) ++ limit = numAvailFull; ++ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); ++ lenTest2 -= lenTest + 1; ++ if (lenTest2 >= 2) ++ { ++ UInt32 state2 = kRepNextStates[state]; ++ UInt32 posStateNext = (position + lenTest) & p->pbMask; ++ UInt32 curAndLenCharPrice = ++ price + p->repLenEnc.prices[posState][lenTest - 2] + ++ GET_PRICE_0(p->isMatch[state2][posStateNext]) + ++ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), ++ data[lenTest], data2[lenTest], p->ProbPrices); ++ state2 = kLiteralNextStates[state2]; ++ posStateNext = (position + lenTest + 1) & p->pbMask; ++ nextRepMatchPrice = curAndLenCharPrice + ++ GET_PRICE_1(p->isMatch[state2][posStateNext]) + ++ GET_PRICE_1(p->isRep[state2]); ++ ++ /* for (; lenTest2 >= 2; lenTest2--) */ ++ { ++ UInt32 curAndLenPrice; ++ COptimal *opt; ++ UInt32 offset = cur + lenTest + 1 + lenTest2; ++ while (lenEnd < offset) ++ p->opt[++lenEnd].price = kInfinityPrice; ++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); ++ opt = &p->opt[offset]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = cur + lenTest + 1; ++ opt->backPrev = 0; ++ opt->prev1IsChar = True; ++ opt->prev2 = True; ++ opt->posPrev2 = cur; ++ opt->backPrev2 = repIndex; ++ } ++ } ++ } ++ } ++ } ++ } ++ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */ ++ if (newLen > numAvail) ++ { ++ newLen = numAvail; ++ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2); ++ matches[numPairs] = newLen; ++ numPairs += 2; ++ } ++ if (newLen >= startLen) ++ { ++ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]); ++ UInt32 offs, curBack, posSlot; ++ UInt32 lenTest; ++ while (lenEnd < cur + newLen) ++ p->opt[++lenEnd].price = kInfinityPrice; ++ ++ offs = 0; ++ while (startLen > matches[offs]) ++ offs += 2; ++ curBack = matches[offs + 1]; ++ GetPosSlot2(curBack, posSlot); ++ for (lenTest = /*2*/ startLen; ; lenTest++) ++ { ++ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN]; ++ UInt32 lenToPosState = GetLenToPosState(lenTest); ++ COptimal *opt; ++ if (curBack < kNumFullDistances) ++ curAndLenPrice += p->distancesPrices[lenToPosState][curBack]; ++ else ++ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask]; ++ ++ opt = &p->opt[cur + lenTest]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = cur; ++ opt->backPrev = curBack + LZMA_NUM_REPS; ++ opt->prev1IsChar = False; ++ } ++ ++ if (/*_maxMode && */lenTest == matches[offs]) ++ { ++ /* Try Match + Literal + Rep0 */ ++ const Byte *data2 = data - (curBack + 1); ++ UInt32 lenTest2 = lenTest + 1; ++ UInt32 limit = lenTest2 + p->numFastBytes; ++ UInt32 nextRepMatchPrice; ++ if (limit > numAvailFull) ++ limit = numAvailFull; ++ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++); ++ lenTest2 -= lenTest + 1; ++ if (lenTest2 >= 2) ++ { ++ UInt32 state2 = kMatchNextStates[state]; ++ UInt32 posStateNext = (position + lenTest) & p->pbMask; ++ UInt32 curAndLenCharPrice = curAndLenPrice + ++ GET_PRICE_0(p->isMatch[state2][posStateNext]) + ++ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]), ++ data[lenTest], data2[lenTest], p->ProbPrices); ++ state2 = kLiteralNextStates[state2]; ++ posStateNext = (posStateNext + 1) & p->pbMask; ++ nextRepMatchPrice = curAndLenCharPrice + ++ GET_PRICE_1(p->isMatch[state2][posStateNext]) + ++ GET_PRICE_1(p->isRep[state2]); ++ ++ /* for (; lenTest2 >= 2; lenTest2--) */ ++ { ++ UInt32 offset = cur + lenTest + 1 + lenTest2; ++ UInt32 curAndLenPrice; ++ COptimal *opt; ++ while (lenEnd < offset) ++ p->opt[++lenEnd].price = kInfinityPrice; ++ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext); ++ opt = &p->opt[offset]; ++ if (curAndLenPrice < opt->price) ++ { ++ opt->price = curAndLenPrice; ++ opt->posPrev = cur + lenTest + 1; ++ opt->backPrev = 0; ++ opt->prev1IsChar = True; ++ opt->prev2 = True; ++ opt->posPrev2 = cur; ++ opt->backPrev2 = curBack + LZMA_NUM_REPS; ++ } ++ } ++ } ++ offs += 2; ++ if (offs == numPairs) ++ break; ++ curBack = matches[offs + 1]; ++ if (curBack >= kNumFullDistances) ++ GetPosSlot2(curBack, posSlot); ++ } ++ } ++ } ++ } ++} ++ ++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist)) ++ ++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes) ++{ ++ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i; ++ const Byte *data; ++ const UInt32 *matches; ++ ++ if (p->additionalOffset == 0) ++ mainLen = ReadMatchDistances(p, &numPairs); ++ else ++ { ++ mainLen = p->longestMatchLength; ++ numPairs = p->numPairs; ++ } ++ ++ numAvail = p->numAvail; ++ *backRes = (UInt32)-1; ++ if (numAvail < 2) ++ return 1; ++ if (numAvail > LZMA_MATCH_LEN_MAX) ++ numAvail = LZMA_MATCH_LEN_MAX; ++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; ++ ++ repLen = repIndex = 0; ++ for (i = 0; i < LZMA_NUM_REPS; i++) ++ { ++ UInt32 len; ++ const Byte *data2 = data - (p->reps[i] + 1); ++ if (data[0] != data2[0] || data[1] != data2[1]) ++ continue; ++ for (len = 2; len < numAvail && data[len] == data2[len]; len++); ++ if (len >= p->numFastBytes) ++ { ++ *backRes = i; ++ MovePos(p, len - 1); ++ return len; ++ } ++ if (len > repLen) ++ { ++ repIndex = i; ++ repLen = len; ++ } ++ } ++ ++ matches = p->matches; ++ if (mainLen >= p->numFastBytes) ++ { ++ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS; ++ MovePos(p, mainLen - 1); ++ return mainLen; ++ } ++ ++ mainDist = 0; /* for GCC */ ++ if (mainLen >= 2) ++ { ++ mainDist = matches[numPairs - 1]; ++ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1) ++ { ++ if (!ChangePair(matches[numPairs - 3], mainDist)) ++ break; ++ numPairs -= 2; ++ mainLen = matches[numPairs - 2]; ++ mainDist = matches[numPairs - 1]; ++ } ++ if (mainLen == 2 && mainDist >= 0x80) ++ mainLen = 1; ++ } ++ ++ if (repLen >= 2 && ( ++ (repLen + 1 >= mainLen) || ++ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) || ++ (repLen + 3 >= mainLen && mainDist >= (1 << 15)))) ++ { ++ *backRes = repIndex; ++ MovePos(p, repLen - 1); ++ return repLen; ++ } ++ ++ if (mainLen < 2 || numAvail <= 2) ++ return 1; ++ ++ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs); ++ if (p->longestMatchLength >= 2) ++ { ++ UInt32 newDistance = matches[p->numPairs - 1]; ++ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) || ++ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) || ++ (p->longestMatchLength > mainLen + 1) || ++ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist))) ++ return 1; ++ } ++ ++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1; ++ for (i = 0; i < LZMA_NUM_REPS; i++) ++ { ++ UInt32 len, limit; ++ const Byte *data2 = data - (p->reps[i] + 1); ++ if (data[0] != data2[0] || data[1] != data2[1]) ++ continue; ++ limit = mainLen - 1; ++ for (len = 2; len < limit && data[len] == data2[len]; len++); ++ if (len >= limit) ++ return 1; ++ } ++ *backRes = mainDist + LZMA_NUM_REPS; ++ MovePos(p, mainLen - 2); ++ return mainLen; ++} ++ ++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState) ++{ ++ UInt32 len; ++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); ++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); ++ p->state = kMatchNextStates[p->state]; ++ len = LZMA_MATCH_LEN_MIN; ++ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); ++ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1); ++ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits); ++ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask); ++} ++ ++static SRes CheckErrors(CLzmaEnc *p) ++{ ++ if (p->result != SZ_OK) ++ return p->result; ++ if (p->rc.res != SZ_OK) ++ p->result = SZ_ERROR_WRITE; ++ if (p->matchFinderBase.result != SZ_OK) ++ p->result = SZ_ERROR_READ; ++ if (p->result != SZ_OK) ++ p->finished = True; ++ return p->result; ++} ++ ++static SRes Flush(CLzmaEnc *p, UInt32 nowPos) ++{ ++ /* ReleaseMFStream(); */ ++ p->finished = True; ++ if (p->writeEndMark) ++ WriteEndMarker(p, nowPos & p->pbMask); ++ RangeEnc_FlushData(&p->rc); ++ RangeEnc_FlushStream(&p->rc); ++ return CheckErrors(p); ++} ++ ++static void FillAlignPrices(CLzmaEnc *p) ++{ ++ UInt32 i; ++ for (i = 0; i < kAlignTableSize; i++) ++ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices); ++ p->alignPriceCount = 0; ++} ++ ++static void FillDistancesPrices(CLzmaEnc *p) ++{ ++ UInt32 tempPrices[kNumFullDistances]; ++ UInt32 i, lenToPosState; ++ for (i = kStartPosModelIndex; i < kNumFullDistances; i++) ++ { ++ UInt32 posSlot = GetPosSlot1(i); ++ UInt32 footerBits = ((posSlot >> 1) - 1); ++ UInt32 base = ((2 | (posSlot & 1)) << footerBits); ++ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices); ++ } ++ ++ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++) ++ { ++ UInt32 posSlot; ++ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState]; ++ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState]; ++ for (posSlot = 0; posSlot < p->distTableSize; posSlot++) ++ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices); ++ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++) ++ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits); ++ ++ { ++ UInt32 *distancesPrices = p->distancesPrices[lenToPosState]; ++ UInt32 i; ++ for (i = 0; i < kStartPosModelIndex; i++) ++ distancesPrices[i] = posSlotPrices[i]; ++ for (; i < kNumFullDistances; i++) ++ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i]; ++ } ++ } ++ p->matchPriceCount = 0; ++} ++ ++void LzmaEnc_Construct(CLzmaEnc *p) ++{ ++ RangeEnc_Construct(&p->rc); ++ MatchFinder_Construct(&p->matchFinderBase); ++ #ifndef _7ZIP_ST ++ MatchFinderMt_Construct(&p->matchFinderMt); ++ p->matchFinderMt.MatchFinder = &p->matchFinderBase; ++ #endif ++ ++ { ++ CLzmaEncProps props; ++ LzmaEncProps_Init(&props); ++ LzmaEnc_SetProps(p, &props); ++ } ++ ++ #ifndef LZMA_LOG_BSR ++ LzmaEnc_FastPosInit(p->g_FastPos); ++ #endif ++ ++ LzmaEnc_InitPriceTables(p->ProbPrices); ++ p->litProbs = 0; ++ p->saveState.litProbs = 0; ++} ++ ++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc) ++{ ++ void *p; ++ p = alloc->Alloc(alloc, sizeof(CLzmaEnc)); ++ if (p != 0) ++ LzmaEnc_Construct((CLzmaEnc *)p); ++ return p; ++} ++ ++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc) ++{ ++ alloc->Free(alloc, p->litProbs); ++ alloc->Free(alloc, p->saveState.litProbs); ++ p->litProbs = 0; ++ p->saveState.litProbs = 0; ++} ++ ++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ #ifndef _7ZIP_ST ++ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig); ++ #endif ++ MatchFinder_Free(&p->matchFinderBase, allocBig); ++ LzmaEnc_FreeLits(p, alloc); ++ RangeEnc_Free(&p->rc, alloc); ++} ++ ++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig); ++ alloc->Free(alloc, p); ++} ++ ++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize) ++{ ++ UInt32 nowPos32, startPos32; ++ if (p->needInit) ++ { ++ p->matchFinder.Init(p->matchFinderObj); ++ p->needInit = 0; ++ } ++ ++ if (p->finished) ++ return p->result; ++ RINOK(CheckErrors(p)); ++ ++ nowPos32 = (UInt32)p->nowPos64; ++ startPos32 = nowPos32; ++ ++ if (p->nowPos64 == 0) ++ { ++ UInt32 numPairs; ++ Byte curByte; ++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) ++ return Flush(p, nowPos32); ++ ReadMatchDistances(p, &numPairs); ++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0); ++ p->state = kLiteralNextStates[p->state]; ++ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset); ++ LitEnc_Encode(&p->rc, p->litProbs, curByte); ++ p->additionalOffset--; ++ nowPos32++; ++ } ++ ++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0) ++ for (;;) ++ { ++ UInt32 pos, len, posState; ++ ++ if (p->fastMode) ++ len = GetOptimumFast(p, &pos); ++ else ++ len = GetOptimum(p, nowPos32, &pos); ++ ++ #ifdef SHOW_STAT2 ++ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos); ++ #endif ++ ++ posState = nowPos32 & p->pbMask; ++ if (len == 1 && pos == (UInt32)-1) ++ { ++ Byte curByte; ++ CLzmaProb *probs; ++ const Byte *data; ++ ++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0); ++ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; ++ curByte = *data; ++ probs = LIT_PROBS(nowPos32, *(data - 1)); ++ if (IsCharState(p->state)) ++ LitEnc_Encode(&p->rc, probs, curByte); ++ else ++ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1)); ++ p->state = kLiteralNextStates[p->state]; ++ } ++ else ++ { ++ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1); ++ if (pos < LZMA_NUM_REPS) ++ { ++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1); ++ if (pos == 0) ++ { ++ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0); ++ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1)); ++ } ++ else ++ { ++ UInt32 distance = p->reps[pos]; ++ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1); ++ if (pos == 1) ++ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0); ++ else ++ { ++ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1); ++ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2); ++ if (pos == 3) ++ p->reps[3] = p->reps[2]; ++ p->reps[2] = p->reps[1]; ++ } ++ p->reps[1] = p->reps[0]; ++ p->reps[0] = distance; ++ } ++ if (len == 1) ++ p->state = kShortRepNextStates[p->state]; ++ else ++ { ++ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); ++ p->state = kRepNextStates[p->state]; ++ } ++ } ++ else ++ { ++ UInt32 posSlot; ++ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0); ++ p->state = kMatchNextStates[p->state]; ++ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices); ++ pos -= LZMA_NUM_REPS; ++ GetPosSlot(pos, posSlot); ++ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot); ++ ++ if (posSlot >= kStartPosModelIndex) ++ { ++ UInt32 footerBits = ((posSlot >> 1) - 1); ++ UInt32 base = ((2 | (posSlot & 1)) << footerBits); ++ UInt32 posReduced = pos - base; ++ ++ if (posSlot < kEndPosModelIndex) ++ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced); ++ else ++ { ++ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits); ++ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask); ++ p->alignPriceCount++; ++ } ++ } ++ p->reps[3] = p->reps[2]; ++ p->reps[2] = p->reps[1]; ++ p->reps[1] = p->reps[0]; ++ p->reps[0] = pos; ++ p->matchPriceCount++; ++ } ++ } ++ p->additionalOffset -= len; ++ nowPos32 += len; ++ if (p->additionalOffset == 0) ++ { ++ UInt32 processed; ++ if (!p->fastMode) ++ { ++ if (p->matchPriceCount >= (1 << 7)) ++ FillDistancesPrices(p); ++ if (p->alignPriceCount >= kAlignTableSize) ++ FillAlignPrices(p); ++ } ++ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0) ++ break; ++ processed = nowPos32 - startPos32; ++ if (useLimits) ++ { ++ if (processed + kNumOpts + 300 >= maxUnpackSize || ++ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize) ++ break; ++ } ++ else if (processed >= (1 << 15)) ++ { ++ p->nowPos64 += nowPos32 - startPos32; ++ return CheckErrors(p); ++ } ++ } ++ } ++ p->nowPos64 += nowPos32 - startPos32; ++ return Flush(p, nowPos32); ++} ++ ++#define kBigHashDicLimit ((UInt32)1 << 24) ++ ++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ UInt32 beforeSize = kNumOpts; ++ Bool btMode; ++ if (!RangeEnc_Alloc(&p->rc, alloc)) ++ return SZ_ERROR_MEM; ++ btMode = (p->matchFinderBase.btMode != 0); ++ #ifndef _7ZIP_ST ++ p->mtMode = (p->multiThread && !p->fastMode && btMode); ++ #endif ++ ++ { ++ unsigned lclp = p->lc + p->lp; ++ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp) ++ { ++ LzmaEnc_FreeLits(p, alloc); ++ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); ++ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb)); ++ if (p->litProbs == 0 || p->saveState.litProbs == 0) ++ { ++ LzmaEnc_FreeLits(p, alloc); ++ return SZ_ERROR_MEM; ++ } ++ p->lclp = lclp; ++ } ++ } ++ ++ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit); ++ ++ if (beforeSize + p->dictSize < keepWindowSize) ++ beforeSize = keepWindowSize - p->dictSize; ++ ++ #ifndef _7ZIP_ST ++ if (p->mtMode) ++ { ++ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)); ++ p->matchFinderObj = &p->matchFinderMt; ++ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder); ++ } ++ else ++ #endif ++ { ++ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig)) ++ return SZ_ERROR_MEM; ++ p->matchFinderObj = &p->matchFinderBase; ++ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder); ++ } ++ return SZ_OK; ++} ++ ++void LzmaEnc_Init(CLzmaEnc *p) ++{ ++ UInt32 i; ++ p->state = 0; ++ for (i = 0 ; i < LZMA_NUM_REPS; i++) ++ p->reps[i] = 0; ++ ++ RangeEnc_Init(&p->rc); ++ ++ ++ for (i = 0; i < kNumStates; i++) ++ { ++ UInt32 j; ++ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++) ++ { ++ p->isMatch[i][j] = kProbInitValue; ++ p->isRep0Long[i][j] = kProbInitValue; ++ } ++ p->isRep[i] = kProbInitValue; ++ p->isRepG0[i] = kProbInitValue; ++ p->isRepG1[i] = kProbInitValue; ++ p->isRepG2[i] = kProbInitValue; ++ } ++ ++ { ++ UInt32 num = 0x300 << (p->lp + p->lc); ++ for (i = 0; i < num; i++) ++ p->litProbs[i] = kProbInitValue; ++ } ++ ++ { ++ for (i = 0; i < kNumLenToPosStates; i++) ++ { ++ CLzmaProb *probs = p->posSlotEncoder[i]; ++ UInt32 j; ++ for (j = 0; j < (1 << kNumPosSlotBits); j++) ++ probs[j] = kProbInitValue; ++ } ++ } ++ { ++ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++) ++ p->posEncoders[i] = kProbInitValue; ++ } ++ ++ LenEnc_Init(&p->lenEnc.p); ++ LenEnc_Init(&p->repLenEnc.p); ++ ++ for (i = 0; i < (1 << kNumAlignBits); i++) ++ p->posAlignEncoder[i] = kProbInitValue; ++ ++ p->optimumEndIndex = 0; ++ p->optimumCurrentIndex = 0; ++ p->additionalOffset = 0; ++ ++ p->pbMask = (1 << p->pb) - 1; ++ p->lpMask = (1 << p->lp) - 1; ++} ++ ++void LzmaEnc_InitPrices(CLzmaEnc *p) ++{ ++ if (!p->fastMode) ++ { ++ FillDistancesPrices(p); ++ FillAlignPrices(p); ++ } ++ ++ p->lenEnc.tableSize = ++ p->repLenEnc.tableSize = ++ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN; ++ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices); ++ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices); ++} ++ ++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ UInt32 i; ++ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++) ++ if (p->dictSize <= ((UInt32)1 << i)) ++ break; ++ p->distTableSize = i * 2; ++ ++ p->finished = False; ++ p->result = SZ_OK; ++ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig)); ++ LzmaEnc_Init(p); ++ LzmaEnc_InitPrices(p); ++ p->nowPos64 = 0; ++ return SZ_OK; ++} ++ ++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ++ ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ p->matchFinderBase.stream = inStream; ++ p->needInit = 1; ++ p->rc.outStream = outStream; ++ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig); ++} ++ ++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp, ++ ISeqInStream *inStream, UInt32 keepWindowSize, ++ ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ p->matchFinderBase.stream = inStream; ++ p->needInit = 1; ++ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); ++} ++ ++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen) ++{ ++ p->matchFinderBase.directInput = 1; ++ p->matchFinderBase.bufferBase = (Byte *)src; ++ p->matchFinderBase.directInputRem = srcLen; ++} ++ ++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen, ++ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ LzmaEnc_SetInputBuf(p, src, srcLen); ++ p->needInit = 1; ++ ++ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig); ++} ++ ++void LzmaEnc_Finish(CLzmaEncHandle pp) ++{ ++ #ifndef _7ZIP_ST ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ if (p->mtMode) ++ MatchFinderMt_ReleaseStream(&p->matchFinderMt); ++ #else ++ pp = pp; ++ #endif ++} ++ ++typedef struct ++{ ++ ISeqOutStream funcTable; ++ Byte *data; ++ SizeT rem; ++ Bool overflow; ++} CSeqOutStreamBuf; ++ ++static size_t MyWrite(void *pp, const void *data, size_t size) ++{ ++ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp; ++ if (p->rem < size) ++ { ++ size = p->rem; ++ p->overflow = True; ++ } ++ memcpy(p->data, data, size); ++ p->rem -= size; ++ p->data += size; ++ return size; ++} ++ ++ ++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp) ++{ ++ const CLzmaEnc *p = (CLzmaEnc *)pp; ++ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj); ++} ++ ++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp) ++{ ++ const CLzmaEnc *p = (CLzmaEnc *)pp; ++ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset; ++} ++ ++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit, ++ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ UInt64 nowPos64; ++ SRes res; ++ CSeqOutStreamBuf outStream; ++ ++ outStream.funcTable.Write = MyWrite; ++ outStream.data = dest; ++ outStream.rem = *destLen; ++ outStream.overflow = False; ++ ++ p->writeEndMark = False; ++ p->finished = False; ++ p->result = SZ_OK; ++ ++ if (reInit) ++ LzmaEnc_Init(p); ++ LzmaEnc_InitPrices(p); ++ nowPos64 = p->nowPos64; ++ RangeEnc_Init(&p->rc); ++ p->rc.outStream = &outStream.funcTable; ++ ++ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize); ++ ++ *unpackSize = (UInt32)(p->nowPos64 - nowPos64); ++ *destLen -= outStream.rem; ++ if (outStream.overflow) ++ return SZ_ERROR_OUTPUT_EOF; ++ ++ return res; ++} ++ ++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress) ++{ ++ SRes res = SZ_OK; ++ ++ #ifndef _7ZIP_ST ++ Byte allocaDummy[0x300]; ++ int i = 0; ++ for (i = 0; i < 16; i++) ++ allocaDummy[i] = (Byte)i; ++ #endif ++ ++ for (;;) ++ { ++ res = LzmaEnc_CodeOneBlock(p, False, 0, 0); ++ if (res != SZ_OK || p->finished != 0) ++ break; ++ if (progress != 0) ++ { ++ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc)); ++ if (res != SZ_OK) ++ { ++ res = SZ_ERROR_PROGRESS; ++ break; ++ } ++ } ++ } ++ LzmaEnc_Finish(p); ++ return res; ++} ++ ++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress, ++ ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig)); ++ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress); ++} ++ ++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ int i; ++ UInt32 dictSize = p->dictSize; ++ if (*size < LZMA_PROPS_SIZE) ++ return SZ_ERROR_PARAM; ++ *size = LZMA_PROPS_SIZE; ++ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc); ++ ++ for (i = 11; i <= 30; i++) ++ { ++ if (dictSize <= ((UInt32)2 << i)) ++ { ++ dictSize = (2 << i); ++ break; ++ } ++ if (dictSize <= ((UInt32)3 << i)) ++ { ++ dictSize = (3 << i); ++ break; ++ } ++ } ++ ++ for (i = 0; i < 4; i++) ++ props[1 + i] = (Byte)(dictSize >> (8 * i)); ++ return SZ_OK; ++} ++ ++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, ++ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ SRes res; ++ CLzmaEnc *p = (CLzmaEnc *)pp; ++ ++ CSeqOutStreamBuf outStream; ++ ++ LzmaEnc_SetInputBuf(p, src, srcLen); ++ ++ outStream.funcTable.Write = MyWrite; ++ outStream.data = dest; ++ outStream.rem = *destLen; ++ outStream.overflow = False; ++ ++ p->writeEndMark = writeEndMark; ++ ++ p->rc.outStream = &outStream.funcTable; ++ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig); ++ if (res == SZ_OK) ++ res = LzmaEnc_Encode2(p, progress); ++ ++ *destLen -= outStream.rem; ++ if (outStream.overflow) ++ return SZ_ERROR_OUTPUT_EOF; ++ return res; ++} ++ ++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen, ++ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, ++ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig) ++{ ++ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc); ++ SRes res; ++ if (p == 0) ++ return SZ_ERROR_MEM; ++ ++ res = LzmaEnc_SetProps(p, props); ++ if (res == SZ_OK) ++ { ++ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize); ++ if (res == SZ_OK) ++ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen, ++ writeEndMark, progress, alloc, allocBig); ++ } ++ ++ LzmaEnc_Destroy(p, alloc, allocBig); ++ return res; ++} +--- /dev/null ++++ b/lib/lzma/Makefile +@@ -0,0 +1,7 @@ ++lzma_compress-objs := LzFind.o LzmaEnc.o ++lzma_decompress-objs := LzmaDec.o ++ ++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o ++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o ++ ++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h diff --git a/target/linux/generic/pending-5.15/532-jffs2_eofdetect.patch b/target/linux/generic/pending-5.15/532-jffs2_eofdetect.patch new file mode 100644 index 0000000000..a1d7dc1a69 --- /dev/null +++ b/target/linux/generic/pending-5.15/532-jffs2_eofdetect.patch @@ -0,0 +1,65 @@ +From: Felix Fietkau +Subject: fs: jffs2: EOF marker + +Signed-off-by: Felix Fietkau +--- + fs/jffs2/build.c | 10 ++++++++++ + fs/jffs2/scan.c | 21 +++++++++++++++++++-- + 2 files changed, 29 insertions(+), 2 deletions(-) + +--- a/fs/jffs2/build.c ++++ b/fs/jffs2/build.c +@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct + dbg_fsbuild("scanned flash completely\n"); + jffs2_dbg_dump_block_lists_nolock(c); + ++ if (c->flags & (1 << 7)) { ++ printk("%s(): unlocking the mtd device... ", __func__); ++ mtd_unlock(c->mtd, 0, c->mtd->size); ++ printk("done.\n"); ++ ++ printk("%s(): erasing all blocks after the end marker... ", __func__); ++ jffs2_erase_pending_blocks(c, -1); ++ printk("done.\n"); ++ } ++ + dbg_fsbuild("pass 1 starting\n"); + c->flags |= JFFS2_SB_FLAG_BUILDING; + /* Now scan the directory tree, increasing nlink according to every dirent found. */ +--- a/fs/jffs2/scan.c ++++ b/fs/jffs2/scan.c +@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in + /* reset summary info for next eraseblock scan */ + jffs2_sum_reset_collected(s); + +- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), +- buf_size, s); ++ if (c->flags & (1 << 7)) { ++ if (mtd_block_isbad(c->mtd, jeb->offset)) ++ ret = BLK_STATE_BADBLOCK; ++ else ++ ret = BLK_STATE_ALLFF; ++ } else ++ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset), ++ buf_size, s); + + if (ret < 0) + goto out; +@@ -565,6 +571,17 @@ full_scan: + return err; + } + ++ if ((buf[0] == 0xde) && ++ (buf[1] == 0xad) && ++ (buf[2] == 0xc0) && ++ (buf[3] == 0xde)) { ++ /* end of filesystem. erase everything after this point */ ++ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset); ++ c->flags |= (1 << 7); ++ ++ return BLK_STATE_ALLFF; ++ } ++ + /* We temporarily use 'ofs' as a pointer into the buffer/jeb */ + ofs = 0; + max_ofs = EMPTY_SCAN_SIZE(c->sector_size); diff --git a/target/linux/generic/pending-5.15/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-5.15/600-netfilter_conntrack_flush.patch new file mode 100644 index 0000000000..ab6953e557 --- /dev/null +++ b/target/linux/generic/pending-5.15/600-netfilter_conntrack_flush.patch @@ -0,0 +1,88 @@ +From: Felix Fietkau +Subject: netfilter: add support for flushing conntrack via /proc + +lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314 +Signed-off-by: Felix Fietkau +--- + net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++- + 1 file changed, 58 insertions(+), 1 deletion(-) + +--- a/net/netfilter/nf_conntrack_standalone.c ++++ b/net/netfilter/nf_conntrack_standalone.c +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + #include + #ifdef CONFIG_SYSCTL + #include +@@ -457,6 +458,56 @@ static int ct_cpu_seq_show(struct seq_fi + return 0; + } + ++struct kill_request { ++ u16 family; ++ union nf_inet_addr addr; ++}; ++ ++static int kill_matching(struct nf_conn *i, void *data) ++{ ++ struct kill_request *kr = data; ++ struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple; ++ struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple; ++ ++ if (!kr->family) ++ return 1; ++ ++ if (t1->src.l3num != kr->family) ++ return 0; ++ ++ return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) || ++ nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) || ++ nf_inet_addr_cmp(&kr->addr, &t2->src.u3) || ++ nf_inet_addr_cmp(&kr->addr, &t2->dst.u3)); ++} ++ ++static int ct_file_write(struct file *file, char *buf, size_t count) ++{ ++ struct seq_file *seq = file->private_data; ++ struct net *net = seq_file_net(seq); ++ struct kill_request kr = { }; ++ ++ if (count == 0) ++ return 0; ++ ++ if (count >= INET6_ADDRSTRLEN) ++ count = INET6_ADDRSTRLEN - 1; ++ ++ if (strnchr(buf, count, ':')) { ++ kr.family = AF_INET6; ++ if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL)) ++ return -EINVAL; ++ } else if (strnchr(buf, count, '.')) { ++ kr.family = AF_INET; ++ if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL)) ++ return -EINVAL; ++ } ++ ++ nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0); ++ ++ return 0; ++} ++ + static const struct seq_operations ct_cpu_seq_ops = { + .start = ct_cpu_seq_start, + .next = ct_cpu_seq_next, +@@ -470,8 +521,9 @@ static int nf_conntrack_standalone_init_ + kuid_t root_uid; + kgid_t root_gid; + +- pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops, +- sizeof(struct ct_iter_state)); ++ pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net, ++ &ct_seq_ops, &ct_file_write, ++ sizeof(struct ct_iter_state), NULL); + if (!pde) + goto out_nf_conntrack; + diff --git a/target/linux/generic/pending-5.15/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-5.15/610-netfilter_match_bypass_default_checks.patch new file mode 100644 index 0000000000..457703121c --- /dev/null +++ b/target/linux/generic/pending-5.15/610-netfilter_match_bypass_default_checks.patch @@ -0,0 +1,110 @@ +From: Felix Fietkau +Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0 + +Signed-off-by: Felix Fietkau +--- + include/uapi/linux/netfilter_ipv4/ip_tables.h | 1 + + net/ipv4/netfilter/ip_tables.c | 37 +++++++++++++++++++++++++++ + 2 files changed, 38 insertions(+) + +--- a/include/uapi/linux/netfilter_ipv4/ip_tables.h ++++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h +@@ -89,6 +89,7 @@ struct ipt_ip { + #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */ + #define IPT_F_GOTO 0x02 /* Set if jump is a goto */ + #define IPT_F_MASK 0x03 /* All possible flag bits mask. */ ++#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */ + + /* Values for "inv" field in struct ipt_ip. */ + #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */ +--- a/net/ipv4/netfilter/ip_tables.c ++++ b/net/ipv4/netfilter/ip_tables.c +@@ -50,6 +50,9 @@ ip_packet_match(const struct iphdr *ip, + { + unsigned long ret; + ++ if (ipinfo->flags & IPT_F_NO_DEF_MATCH) ++ return true; ++ + if (NF_INVF(ipinfo, IPT_INV_SRCIP, + (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) || + NF_INVF(ipinfo, IPT_INV_DSTIP, +@@ -80,6 +83,29 @@ ip_packet_match(const struct iphdr *ip, + return true; + } + ++static void ++ip_checkdefault(struct ipt_ip *ip) ++{ ++ static const char iface_mask[IFNAMSIZ] = {}; ++ ++ if (ip->invflags || ip->flags & IPT_F_FRAG) ++ return; ++ ++ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0) ++ return; ++ ++ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0) ++ return; ++ ++ if (ip->smsk.s_addr || ip->dmsk.s_addr) ++ return; ++ ++ if (ip->proto) ++ return; ++ ++ ip->flags |= IPT_F_NO_DEF_MATCH; ++} ++ + static bool + ip_checkentry(const struct ipt_ip *ip) + { +@@ -524,6 +550,8 @@ find_check_entry(struct ipt_entry *e, st + struct xt_mtchk_param mtpar; + struct xt_entry_match *ematch; + ++ ip_checkdefault(&e->ip); ++ + if (!xt_percpu_counter_alloc(alloc_state, &e->counters)) + return -ENOMEM; + +@@ -818,6 +846,7 @@ copy_entries_to_user(unsigned int total_ + const struct xt_table_info *private = table->private; + int ret = 0; + const void *loc_cpu_entry; ++ u8 flags; + + counters = alloc_counters(table); + if (IS_ERR(counters)) +@@ -845,6 +874,14 @@ copy_entries_to_user(unsigned int total_ + goto free_counters; + } + ++ flags = e->ip.flags & IPT_F_MASK; ++ if (copy_to_user(userptr + off ++ + offsetof(struct ipt_entry, ip.flags), ++ &flags, sizeof(flags)) != 0) { ++ ret = -EFAULT; ++ goto free_counters; ++ } ++ + for (i = sizeof(struct ipt_entry); + i < e->target_offset; + i += m->u.match_size) { +@@ -1223,12 +1260,15 @@ compat_copy_entry_to_user(struct ipt_ent + compat_uint_t origsize; + const struct xt_entry_match *ematch; + int ret = 0; ++ u8 flags = e->ip.flags & IPT_F_MASK; + + origsize = *size; + ce = *dstptr; + if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 || + copy_to_user(&ce->counters, &counters[i], +- sizeof(counters[i])) != 0) ++ sizeof(counters[i])) != 0 || ++ copy_to_user(&ce->ip.flags, &flags, ++ sizeof(flags)) != 0) + return -EFAULT; + + *dstptr += sizeof(struct compat_ipt_entry); diff --git a/target/linux/generic/pending-5.15/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-5.15/611-netfilter_match_bypass_default_table.patch new file mode 100644 index 0000000000..baf738a8d2 --- /dev/null +++ b/target/linux/generic/pending-5.15/611-netfilter_match_bypass_default_table.patch @@ -0,0 +1,106 @@ +From: Felix Fietkau +Subject: netfilter: match bypass default table + +Signed-off-by: Felix Fietkau +--- + net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++----------- + 1 file changed, 58 insertions(+), 21 deletions(-) + +--- a/net/ipv4/netfilter/ip_tables.c ++++ b/net/ipv4/netfilter/ip_tables.c +@@ -246,6 +246,33 @@ struct ipt_entry *ipt_next_entry(const s + return (void *)entry + entry->next_offset; + } + ++static bool ++ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict) ++{ ++ struct xt_entry_target *t; ++ struct xt_standard_target *st; ++ ++ if (e->target_offset != sizeof(struct ipt_entry)) ++ return false; ++ ++ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH)) ++ return false; ++ ++ t = ipt_get_target(e); ++ if (t->u.kernel.target->target) ++ return false; ++ ++ st = (struct xt_standard_target *) t; ++ if (st->verdict == XT_RETURN) ++ return false; ++ ++ if (st->verdict >= 0) ++ return false; ++ ++ *verdict = (unsigned)(-st->verdict) - 1; ++ return true; ++} ++ + /* Returns one of the generic firewall policies, like NF_ACCEPT. */ + unsigned int + ipt_do_table(struct sk_buff *skb, +@@ -266,27 +293,28 @@ ipt_do_table(struct sk_buff *skb, + unsigned int addend; + + /* Initialization */ ++ WARN_ON(!(table->valid_hooks & (1 << hook))); ++ local_bh_disable(); ++ private = READ_ONCE(table->private); /* Address dependency. */ ++ cpu = smp_processor_id(); ++ table_base = private->entries; ++ ++ e = get_entry(table_base, private->hook_entry[hook]); ++ if (ipt_handle_default_rule(e, &verdict)) { ++ struct xt_counters *counter; ++ ++ counter = xt_get_this_cpu_counter(&e->counters); ++ ADD_COUNTER(*counter, skb->len, 1); ++ local_bh_enable(); ++ return verdict; ++ } ++ + stackidx = 0; + ip = ip_hdr(skb); + indev = state->in ? state->in->name : nulldevname; + outdev = state->out ? state->out->name : nulldevname; +- /* We handle fragments by dealing with the first fragment as +- * if it was a normal packet. All other fragments are treated +- * normally, except that they will NEVER match rules that ask +- * things we don't know, ie. tcp syn flag or ports). If the +- * rule is also a fragment-specific rule, non-fragments won't +- * match it. */ +- acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET; +- acpar.thoff = ip_hdrlen(skb); +- acpar.hotdrop = false; +- acpar.state = state; + +- WARN_ON(!(table->valid_hooks & (1 << hook))); +- local_bh_disable(); + addend = xt_write_recseq_begin(); +- private = READ_ONCE(table->private); /* Address dependency. */ +- cpu = smp_processor_id(); +- table_base = private->entries; + jumpstack = (struct ipt_entry **)private->jumpstack[cpu]; + + /* Switch to alternate jumpstack if we're being invoked via TEE. +@@ -299,7 +327,16 @@ ipt_do_table(struct sk_buff *skb, + if (static_key_false(&xt_tee_enabled)) + jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated); + +- e = get_entry(table_base, private->hook_entry[hook]); ++ /* We handle fragments by dealing with the first fragment as ++ * if it was a normal packet. All other fragments are treated ++ * normally, except that they will NEVER match rules that ask ++ * things we don't know, ie. tcp syn flag or ports). If the ++ * rule is also a fragment-specific rule, non-fragments won't ++ * match it. */ ++ acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET; ++ acpar.thoff = ip_hdrlen(skb); ++ acpar.hotdrop = false; ++ acpar.state = state; + + do { + const struct xt_entry_target *t; diff --git a/target/linux/generic/pending-5.15/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-5.15/612-netfilter_match_reduce_memory_access.patch new file mode 100644 index 0000000000..79da6778b6 --- /dev/null +++ b/target/linux/generic/pending-5.15/612-netfilter_match_reduce_memory_access.patch @@ -0,0 +1,22 @@ +From: Felix Fietkau +Subject: netfilter: reduce match memory access + +Signed-off-by: Felix Fietkau +--- + net/ipv4/netfilter/ip_tables.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/net/ipv4/netfilter/ip_tables.c ++++ b/net/ipv4/netfilter/ip_tables.c +@@ -53,9 +53,9 @@ ip_packet_match(const struct iphdr *ip, + if (ipinfo->flags & IPT_F_NO_DEF_MATCH) + return true; + +- if (NF_INVF(ipinfo, IPT_INV_SRCIP, ++ if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr && + (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) || +- NF_INVF(ipinfo, IPT_INV_DSTIP, ++ NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr && + (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr)) + return false; + diff --git a/target/linux/generic/pending-5.15/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-5.15/613-netfilter_optional_tcp_window_check.patch new file mode 100644 index 0000000000..97e449510d --- /dev/null +++ b/target/linux/generic/pending-5.15/613-netfilter_optional_tcp_window_check.patch @@ -0,0 +1,73 @@ +From: Felix Fietkau +Subject: netfilter: optional tcp window check + +Signed-off-by: Felix Fietkau +--- + net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -31,6 +31,9 @@ + #include + #include + ++/* Do not check the TCP window for incoming packets */ ++static int nf_ct_tcp_no_window_check __read_mostly = 1; ++ + /* "Be conservative in what you do, + be liberal in what you accept from others." + If it's non-zero, we mark only out of window RST segments as INVALID. */ +@@ -476,6 +479,9 @@ static bool tcp_in_window(const struct n + s32 receiver_offset; + bool res, in_recv_win; + ++ if (nf_ct_tcp_no_window_check) ++ return true; ++ + /* + * Get the required data from the packet. + */ +@@ -1130,7 +1136,7 @@ int nf_conntrack_tcp_packet(struct nf_co + IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED && + timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK]) + timeout = timeouts[TCP_CONNTRACK_UNACK]; +- else if (ct->proto.tcp.last_win == 0 && ++ else if (!nf_ct_tcp_no_window_check && ct->proto.tcp.last_win == 0 && + timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS]) + timeout = timeouts[TCP_CONNTRACK_RETRANS]; + else +--- a/net/netfilter/nf_conntrack_standalone.c ++++ b/net/netfilter/nf_conntrack_standalone.c +@@ -25,6 +25,9 @@ + #include + #include + ++/* Do not check the TCP window for incoming packets */ ++static int nf_ct_tcp_no_window_check __read_mostly = 1; ++ + static bool enable_hooks __read_mostly; + MODULE_PARM_DESC(enable_hooks, "Always enable conntrack hooks"); + module_param(enable_hooks, bool, 0000); +@@ -660,6 +663,7 @@ enum nf_ct_sysctl_index { + NF_SYSCTL_CT_PROTO_TIMEOUT_GRE_STREAM, + #endif + ++ NF_SYSCTL_CT_PROTO_TCP_NO_WINDOW_CHECK, + __NF_SYSCTL_CT_LAST_SYSCTL, + }; + +@@ -1014,6 +1018,13 @@ static struct ctl_table nf_ct_sysctl_tab + .proc_handler = proc_dointvec_jiffies, + }, + #endif ++ [NF_SYSCTL_CT_PROTO_TCP_NO_WINDOW_CHECK] = { ++ .procname = "nf_conntrack_tcp_no_window_check", ++ .data = &nf_ct_tcp_no_window_check, ++ .maxlen = sizeof(unsigned int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec, ++ }, + {} + }; + diff --git a/target/linux/generic/pending-5.15/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-5.15/620-net_sched-codel-do-not-defer-queue-length-update.patch new file mode 100644 index 0000000000..4b4825ae3b --- /dev/null +++ b/target/linux/generic/pending-5.15/620-net_sched-codel-do-not-defer-queue-length-update.patch @@ -0,0 +1,86 @@ +From: Konstantin Khlebnikov +Date: Mon, 21 Aug 2017 11:14:14 +0300 +Subject: [PATCH] net_sched/codel: do not defer queue length update + +When codel wants to drop last packet in ->dequeue() it cannot call +qdisc_tree_reduce_backlog() right away - it will notify parent qdisc +about zero qlen and HTB/HFSC will deactivate class. The same class will +be deactivated second time by caller of ->dequeue(). Currently codel and +fq_codel defer update. This triggers warning in HFSC when it's qlen != 0 +but there is no active classes. + +This patch update parent queue length immediately: just temporary increase +qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation +if we have skb to return. + +This might open another problem in HFSC - now operation peek could fail and +deactivate parent class. + +Signed-off-by: Konstantin Khlebnikov +Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581 +--- + +--- a/net/sched/sch_codel.c ++++ b/net/sched/sch_codel.c +@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque + &q->stats, qdisc_pkt_len, codel_get_enqueue_time, + drop_func, dequeue_func); + +- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, +- * or HTB crashes. Defer it for next round. ++ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate ++ * parent class, dequeue in parent qdisc will do the same if we ++ * return skb. Temporary increment qlen if we have skb. + */ +- if (q->stats.drop_count && sch->q.qlen) { +- qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len); ++ if (q->stats.drop_count) { ++ if (skb) ++ sch->q.qlen++; ++ qdisc_tree_reduce_backlog(sch, q->stats.drop_count, ++ q->stats.drop_len); ++ if (skb) ++ sch->q.qlen--; + q->stats.drop_count = 0; + q->stats.drop_len = 0; + } +--- a/net/sched/sch_fq_codel.c ++++ b/net/sched/sch_fq_codel.c +@@ -304,6 +304,21 @@ begin: + &flow->cvars, &q->cstats, qdisc_pkt_len, + codel_get_enqueue_time, drop_func, dequeue_func); + ++ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate ++ * parent class, dequeue in parent qdisc will do the same if we ++ * return skb. Temporary increment qlen if we have skb. ++ */ ++ if (q->cstats.drop_count) { ++ if (skb) ++ sch->q.qlen++; ++ qdisc_tree_reduce_backlog(sch, q->cstats.drop_count, ++ q->cstats.drop_len); ++ if (skb) ++ sch->q.qlen--; ++ q->cstats.drop_count = 0; ++ q->cstats.drop_len = 0; ++ } ++ + if (!skb) { + /* force a pass through old_flows to prevent starvation */ + if ((head == &q->new_flows) && !list_empty(&q->old_flows)) +@@ -314,15 +329,6 @@ begin: + } + qdisc_bstats_update(sch, skb); + flow->deficit -= qdisc_pkt_len(skb); +- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0, +- * or HTB crashes. Defer it for next round. +- */ +- if (q->cstats.drop_count && sch->q.qlen) { +- qdisc_tree_reduce_backlog(sch, q->cstats.drop_count, +- q->cstats.drop_len); +- q->cstats.drop_count = 0; +- q->cstats.drop_len = 0; +- } + return skb; + } + diff --git a/target/linux/generic/pending-5.15/630-packet_socket_type.patch b/target/linux/generic/pending-5.15/630-packet_socket_type.patch new file mode 100644 index 0000000000..5b396c3a8c --- /dev/null +++ b/target/linux/generic/pending-5.15/630-packet_socket_type.patch @@ -0,0 +1,138 @@ +From: Felix Fietkau +Subject: net: add an optimization for dealing with raw sockets + +lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6 +Signed-off-by: Felix Fietkau +--- + include/uapi/linux/if_packet.h | 3 +++ + net/packet/af_packet.c | 34 +++++++++++++++++++++++++++------- + net/packet/internal.h | 1 + + 3 files changed, 31 insertions(+), 7 deletions(-) + +--- a/include/uapi/linux/if_packet.h ++++ b/include/uapi/linux/if_packet.h +@@ -33,6 +33,8 @@ struct sockaddr_ll { + #define PACKET_KERNEL 7 /* To kernel space */ + /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */ + #define PACKET_FASTROUTE 6 /* Fastrouted frame */ ++#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */ ++ + + /* Packet socket options */ + +@@ -59,6 +61,7 @@ struct sockaddr_ll { + #define PACKET_ROLLOVER_STATS 21 + #define PACKET_FANOUT_DATA 22 + #define PACKET_IGNORE_OUTGOING 23 ++#define PACKET_RECV_TYPE 24 + + #define PACKET_FANOUT_HASH 0 + #define PACKET_FANOUT_LB 1 +--- a/net/packet/af_packet.c ++++ b/net/packet/af_packet.c +@@ -1822,6 +1822,7 @@ static int packet_rcv_spkt(struct sk_buf + { + struct sock *sk; + struct sockaddr_pkt *spkt; ++ struct packet_sock *po; + + /* + * When we registered the protocol we saved the socket in the data +@@ -1829,6 +1830,7 @@ static int packet_rcv_spkt(struct sk_buf + */ + + sk = pt->af_packet_priv; ++ po = pkt_sk(sk); + + /* + * Yank back the headers [hope the device set this +@@ -1841,7 +1843,7 @@ static int packet_rcv_spkt(struct sk_buf + * so that this procedure is noop. + */ + +- if (skb->pkt_type == PACKET_LOOPBACK) ++ if (!(po->pkt_type & (1 << skb->pkt_type))) + goto out; + + if (!net_eq(dev_net(dev), sock_net(sk))) +@@ -2079,12 +2081,12 @@ static int packet_rcv(struct sk_buff *sk + unsigned int snaplen, res; + bool is_drop_n_account = false; + +- if (skb->pkt_type == PACKET_LOOPBACK) +- goto drop; +- + sk = pt->af_packet_priv; + po = pkt_sk(sk); + ++ if (!(po->pkt_type & (1 << skb->pkt_type))) ++ goto drop; ++ + if (!net_eq(dev_net(dev), sock_net(sk))) + goto drop; + +@@ -2210,12 +2212,12 @@ static int tpacket_rcv(struct sk_buff *s + BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32); + BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48); + +- if (skb->pkt_type == PACKET_LOOPBACK) +- goto drop; +- + sk = pt->af_packet_priv; + po = pkt_sk(sk); + ++ if (!(po->pkt_type & (1 << skb->pkt_type))) ++ goto drop; ++ + if (!net_eq(dev_net(dev), sock_net(sk))) + goto drop; + +@@ -3325,6 +3327,7 @@ static int packet_create(struct net *net + mutex_init(&po->pg_vec_lock); + po->rollover = NULL; + po->prot_hook.func = packet_rcv; ++ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK); + + if (sock->type == SOCK_PACKET) + po->prot_hook.func = packet_rcv_spkt; +@@ -3969,6 +3972,16 @@ packet_setsockopt(struct socket *sock, i + po->xmit = val ? packet_direct_xmit : dev_queue_xmit; + return 0; + } ++ case PACKET_RECV_TYPE: ++ { ++ unsigned int val; ++ if (optlen != sizeof(val)) ++ return -EINVAL; ++ if (copy_from_sockptr(&val, optval, sizeof(val))) ++ return -EFAULT; ++ po->pkt_type = val & ~BIT(PACKET_LOOPBACK); ++ return 0; ++ } + default: + return -ENOPROTOOPT; + } +@@ -4025,6 +4038,13 @@ static int packet_getsockopt(struct sock + case PACKET_VNET_HDR: + val = po->has_vnet_hdr; + break; ++ case PACKET_RECV_TYPE: ++ if (len > sizeof(unsigned int)) ++ len = sizeof(unsigned int); ++ val = po->pkt_type; ++ ++ data = &val; ++ break; + case PACKET_VERSION: + val = po->tp_version; + break; +--- a/net/packet/internal.h ++++ b/net/packet/internal.h +@@ -137,6 +137,7 @@ struct packet_sock { + int (*xmit)(struct sk_buff *skb); + struct packet_type prot_hook ____cacheline_aligned_in_smp; + atomic_t tp_drops ____cacheline_aligned_in_smp; ++ unsigned int pkt_type; + }; + + static struct packet_sock *pkt_sk(struct sock *sk) diff --git a/target/linux/generic/pending-5.15/655-increase_skb_pad.patch b/target/linux/generic/pending-5.15/655-increase_skb_pad.patch new file mode 100644 index 0000000000..ff39ddb8b3 --- /dev/null +++ b/target/linux/generic/pending-5.15/655-increase_skb_pad.patch @@ -0,0 +1,20 @@ +From: Felix Fietkau +Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance + +lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd +Signed-off-by: Felix Fietkau +--- + include/linux/skbuff.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/include/linux/skbuff.h ++++ b/include/linux/skbuff.h +@@ -2676,7 +2676,7 @@ static inline int pskb_network_may_pull( + * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8) + */ + #ifndef NET_SKB_PAD +-#define NET_SKB_PAD max(32, L1_CACHE_BYTES) ++#define NET_SKB_PAD max(64, L1_CACHE_BYTES) + #endif + + int ___pskb_trim(struct sk_buff *skb, unsigned int len); diff --git a/target/linux/generic/pending-5.15/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-5.15/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch new file mode 100644 index 0000000000..89eb7d61b3 --- /dev/null +++ b/target/linux/generic/pending-5.15/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch @@ -0,0 +1,511 @@ +From: Steven Barth +Subject: Add support for MAP-E FMRs (mesh mode) + +MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication +between MAP CEs (mesh mode) without the need to forward such data to a +border relay. This is similar to how 6rd works but for IPv4 over IPv6. + +Signed-off-by: Steven Barth +--- + include/net/ip6_tunnel.h | 13 ++ + include/uapi/linux/if_tunnel.h | 13 ++ + net/ipv6/ip6_tunnel.c | 276 +++++++++++++++++++++++++++++++++++++++-- + 3 files changed, 291 insertions(+), 11 deletions(-) + +--- a/include/net/ip6_tunnel.h ++++ b/include/net/ip6_tunnel.h +@@ -18,6 +18,18 @@ + /* determine capability on a per-packet basis */ + #define IP6_TNL_F_CAP_PER_PACKET 0x40000 + ++/* IPv6 tunnel FMR */ ++struct __ip6_tnl_fmr { ++ struct __ip6_tnl_fmr *next; /* next fmr in list */ ++ struct in6_addr ip6_prefix; ++ struct in_addr ip4_prefix; ++ ++ __u8 ip6_prefix_len; ++ __u8 ip4_prefix_len; ++ __u8 ea_len; ++ __u8 offset; ++}; ++ + struct __ip6_tnl_parm { + char name[IFNAMSIZ]; /* name of tunnel device */ + int link; /* ifindex of underlying L2 interface */ +@@ -29,6 +41,7 @@ struct __ip6_tnl_parm { + __u32 flags; /* tunnel flags */ + struct in6_addr laddr; /* local tunnel end-point address */ + struct in6_addr raddr; /* remote tunnel end-point address */ ++ struct __ip6_tnl_fmr *fmrs; /* FMRs */ + + __be16 i_flags; + __be16 o_flags; +--- a/include/uapi/linux/if_tunnel.h ++++ b/include/uapi/linux/if_tunnel.h +@@ -77,10 +77,23 @@ enum { + IFLA_IPTUN_ENCAP_DPORT, + IFLA_IPTUN_COLLECT_METADATA, + IFLA_IPTUN_FWMARK, ++ IFLA_IPTUN_FMRS, + __IFLA_IPTUN_MAX, + }; + #define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + ++enum { ++ IFLA_IPTUN_FMR_UNSPEC, ++ IFLA_IPTUN_FMR_IP6_PREFIX, ++ IFLA_IPTUN_FMR_IP4_PREFIX, ++ IFLA_IPTUN_FMR_IP6_PREFIX_LEN, ++ IFLA_IPTUN_FMR_IP4_PREFIX_LEN, ++ IFLA_IPTUN_FMR_EA_LEN, ++ IFLA_IPTUN_FMR_OFFSET, ++ __IFLA_IPTUN_FMR_MAX, ++}; ++#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1) ++ + enum tunnel_encap_types { + TUNNEL_ENCAP_NONE, + TUNNEL_ENCAP_FOU, +--- a/net/ipv6/ip6_tunnel.c ++++ b/net/ipv6/ip6_tunnel.c +@@ -11,6 +11,9 @@ + * linux/net/ipv6/sit.c and linux/net/ipv4/ipip.c + * + * RFC 2473 ++ * ++ * Changes: ++ * Steven Barth : MAP-E FMR support + */ + + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +@@ -67,9 +70,9 @@ static bool log_ecn_error = true; + module_param(log_ecn_error, bool, 0644); + MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN"); + +-static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2) ++static u32 HASH(const struct in6_addr *addr) + { +- u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2); ++ u32 hash = ipv6_addr_hash(addr); + + return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT); + } +@@ -144,17 +147,33 @@ static struct ip6_tnl * + ip6_tnl_lookup(struct net *net, int link, + const struct in6_addr *remote, const struct in6_addr *local) + { +- unsigned int hash = HASH(remote, local); ++ unsigned int hash = HASH(local); + struct ip6_tnl *t, *cand = NULL; + struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); + struct in6_addr any; + + for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { + if (!ipv6_addr_equal(local, &t->parms.laddr) || +- !ipv6_addr_equal(remote, &t->parms.raddr) || + !(t->dev->flags & IFF_UP)) + continue; + ++ if (!ipv6_addr_equal(remote, &t->parms.raddr)) { ++ struct __ip6_tnl_fmr *fmr; ++ bool found = false; ++ ++ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) { ++ if (!ipv6_prefix_equal(remote, &fmr->ip6_prefix, ++ fmr->ip6_prefix_len)) ++ continue; ++ ++ found = true; ++ break; ++ } ++ ++ if (!found) ++ continue; ++ } ++ + if (link == t->parms.link) + return t; + else +@@ -162,7 +181,7 @@ ip6_tnl_lookup(struct net *net, int link + } + + memset(&any, 0, sizeof(any)); +- hash = HASH(&any, local); ++ hash = HASH(local); + for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { + if (!ipv6_addr_equal(local, &t->parms.laddr) || + !ipv6_addr_any(&t->parms.raddr) || +@@ -175,7 +194,7 @@ ip6_tnl_lookup(struct net *net, int link + cand = t; + } + +- hash = HASH(remote, &any); ++ hash = HASH(&any); + for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) { + if (!ipv6_addr_equal(remote, &t->parms.raddr) || + !ipv6_addr_any(&t->parms.laddr) || +@@ -223,7 +242,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n, + + if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) { + prio = 1; +- h = HASH(remote, local); ++ h = HASH(local); + } + return &ip6n->tnls[prio][h]; + } +@@ -405,6 +424,12 @@ ip6_tnl_dev_uninit(struct net_device *de + struct net *net = t->net; + struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id); + ++ while (t->parms.fmrs) { ++ struct __ip6_tnl_fmr *next = t->parms.fmrs->next; ++ kfree(t->parms.fmrs); ++ t->parms.fmrs = next; ++ } ++ + if (dev == ip6n->fb_tnl_dev) + RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL); + else +@@ -821,6 +846,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t, + } + EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl); + ++/** ++ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR ++ * @dest: destination IPv6 address buffer ++ * @skb: received socket buffer ++ * @fmr: MAP FMR ++ * @xmit: Calculate for xmit or rcv ++ **/ ++static void ip4ip6_fmr_calc(struct in6_addr *dest, ++ const struct iphdr *iph, const uint8_t *end, ++ const struct __ip6_tnl_fmr *fmr, bool xmit) ++{ ++ int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len); ++ u8 *portp = NULL; ++ bool use_dest_addr; ++ const struct iphdr *dsth = iph; ++ ++ if ((u8*)dsth >= end) ++ return; ++ ++ /* find significant IP header */ ++ if (iph->protocol == IPPROTO_ICMP) { ++ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4); ++ if (ih && ((u8*)&ih[1]) <= end && ( ++ ih->type == ICMP_DEST_UNREACH || ++ ih->type == ICMP_SOURCE_QUENCH || ++ ih->type == ICMP_TIME_EXCEEDED || ++ ih->type == ICMP_PARAMETERPROB || ++ ih->type == ICMP_REDIRECT)) ++ dsth = (const struct iphdr*)&ih[1]; ++ } ++ ++ /* in xmit-path use dest port by default and source port only if ++ this is an ICMP reply to something else; vice versa in rcv-path */ ++ use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph); ++ ++ /* get dst port */ ++ if (((u8*)&dsth[1]) <= end && ( ++ dsth->protocol == IPPROTO_UDP || ++ dsth->protocol == IPPROTO_TCP || ++ dsth->protocol == IPPROTO_SCTP || ++ dsth->protocol == IPPROTO_DCCP)) { ++ /* for UDP, TCP, SCTP and DCCP source and dest port ++ follow IPv4 header directly */ ++ portp = ((u8*)dsth) + dsth->ihl * 4; ++ ++ if (use_dest_addr) ++ portp += sizeof(u16); ++ } else if (iph->protocol == IPPROTO_ICMP) { ++ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4); ++ ++ /* use icmp identifier as port */ ++ if (((u8*)&ih) <= end && ( ++ (use_dest_addr && ( ++ ih->type == ICMP_ECHOREPLY || ++ ih->type == ICMP_TIMESTAMPREPLY || ++ ih->type == ICMP_INFO_REPLY || ++ ih->type == ICMP_ADDRESSREPLY)) || ++ (!use_dest_addr && ( ++ ih->type == ICMP_ECHO || ++ ih->type == ICMP_TIMESTAMP || ++ ih->type == ICMP_INFO_REQUEST || ++ ih->type == ICMP_ADDRESS) ++ ))) ++ portp = (u8*)&ih->un.echo.id; ++ } ++ ++ if ((portp && &portp[2] <= end) || psidlen == 0) { ++ int frombyte = fmr->ip6_prefix_len / 8; ++ int fromrem = fmr->ip6_prefix_len % 8; ++ int bytes = sizeof(struct in6_addr) - frombyte; ++ const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr; ++ u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len); ++ u64 t = 0; ++ ++ /* extract PSID from port and add it to eabits */ ++ u16 psidbits = 0; ++ if (psidlen > 0) { ++ psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]); ++ psidbits >>= 16 - psidlen - fmr->offset; ++ psidbits = (u16)(psidbits << (16 - psidlen)); ++ eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen)); ++ } ++ ++ /* rewrite destination address */ ++ *dest = fmr->ip6_prefix; ++ memcpy(&dest->s6_addr[10], addr, sizeof(*addr)); ++ dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen)); ++ ++ if (bytes > sizeof(u64)) ++ bytes = sizeof(u64); ++ ++ /* insert eabits */ ++ memcpy(&t, &dest->s6_addr[frombyte], bytes); ++ t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1) ++ << (64 - fmr->ea_len - fromrem)); ++ t = cpu_to_be64(t | (eabits >> fromrem)); ++ memcpy(&dest->s6_addr[frombyte], &t, bytes); ++ } ++} ++ ++ + static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb, + const struct tnl_ptk_info *tpi, + struct metadata_dst *tun_dst, +@@ -873,6 +999,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl + skb_reset_network_header(skb); + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); + ++ if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs && ++ !ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) { ++ /* Packet didn't come from BR, so lookup FMR */ ++ struct __ip6_tnl_fmr *fmr; ++ struct in6_addr expected = tunnel->parms.raddr; ++ for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next) ++ if (ipv6_prefix_equal(&ipv6h->saddr, ++ &fmr->ip6_prefix, fmr->ip6_prefix_len)) ++ break; ++ ++ /* Check that IPv6 matches IPv4 source to prevent spoofing */ ++ if (fmr) ++ ip4ip6_fmr_calc(&expected, ip_hdr(skb), ++ skb_tail_pointer(skb), fmr, false); ++ ++ if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) { ++ rcu_read_unlock(); ++ goto drop; ++ } ++ } ++ + __skb_tunnel_rx(skb, tunnel->dev, tunnel->net); + + err = dscp_ecn_decapsulate(tunnel, ipv6h, skb); +@@ -1024,6 +1171,7 @@ static void init_tel_txopt(struct ipv6_t + opt->ops.opt_nflen = 8; + } + ++ + /** + * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own + * @t: the outgoing tunnel device +@@ -1304,6 +1452,7 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str + u8 protocol) + { + struct ip6_tnl *t = netdev_priv(dev); ++ struct __ip6_tnl_fmr *fmr; + struct ipv6hdr *ipv6h; + const struct iphdr *iph; + int encap_limit = -1; +@@ -1403,6 +1552,18 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str + fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL); + dsfield = INET_ECN_encapsulate(dsfield, orig_dsfield); + ++ /* try to find matching FMR */ ++ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) { ++ unsigned mshift = 32 - fmr->ip4_prefix_len; ++ if (ntohl(fmr->ip4_prefix.s_addr) >> mshift == ++ ntohl(ip_hdr(skb)->daddr) >> mshift) ++ break; ++ } ++ ++ /* change dstaddr according to FMR */ ++ if (fmr) ++ ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true); ++ + if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) + return -1; + +@@ -1555,6 +1716,14 @@ ip6_tnl_change(struct ip6_tnl *t, const + t->parms.link = p->link; + t->parms.proto = p->proto; + t->parms.fwmark = p->fwmark; ++ ++ while (t->parms.fmrs) { ++ struct __ip6_tnl_fmr *next = t->parms.fmrs->next; ++ kfree(t->parms.fmrs); ++ t->parms.fmrs = next; ++ } ++ t->parms.fmrs = p->fmrs; ++ + dst_cache_reset(&t->dst_cache); + ip6_tnl_link_config(t); + return 0; +@@ -1593,6 +1762,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_ + p->flowinfo = u->flowinfo; + p->link = u->link; + p->proto = u->proto; ++ p->fmrs = NULL; + memcpy(p->name, u->name, sizeof(u->name)); + } + +@@ -1978,6 +2148,15 @@ static int ip6_tnl_validate(struct nlatt + return 0; + } + ++static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = { ++ [IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) }, ++ [IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) }, ++ [IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 }, ++ [IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 }, ++ [IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 }, ++ [IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 } ++}; ++ + static void ip6_tnl_netlink_parms(struct nlattr *data[], + struct __ip6_tnl_parm *parms) + { +@@ -2015,6 +2194,46 @@ static void ip6_tnl_netlink_parms(struct + + if (data[IFLA_IPTUN_FWMARK]) + parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]); ++ ++ if (data[IFLA_IPTUN_FMRS]) { ++ unsigned rem; ++ struct nlattr *fmr; ++ nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) { ++ struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c; ++ struct __ip6_tnl_fmr *nfmr; ++ ++ nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX, ++ fmr, ip6_tnl_fmr_policy, NULL); ++ ++ if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL))) ++ continue; ++ ++ nfmr->offset = 6; ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX])) ++ nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX], ++ sizeof(nfmr->ip6_prefix)); ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX])) ++ nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX], ++ sizeof(nfmr->ip4_prefix)); ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN])) ++ nfmr->ip6_prefix_len = nla_get_u8(c); ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN])) ++ nfmr->ip4_prefix_len = nla_get_u8(c); ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN])) ++ nfmr->ea_len = nla_get_u8(c); ++ ++ if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET])) ++ nfmr->offset = nla_get_u8(c); ++ ++ nfmr->next = parms->fmrs; ++ parms->fmrs = nfmr; ++ } ++ } + } + + static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[], +@@ -2130,6 +2349,12 @@ static void ip6_tnl_dellink(struct net_d + + static size_t ip6_tnl_get_size(const struct net_device *dev) + { ++ const struct ip6_tnl *t = netdev_priv(dev); ++ struct __ip6_tnl_fmr *c; ++ int fmrs = 0; ++ for (c = t->parms.fmrs; c; c = c->next) ++ ++fmrs; ++ + return + /* IFLA_IPTUN_LINK */ + nla_total_size(4) + +@@ -2159,6 +2384,24 @@ static size_t ip6_tnl_get_size(const str + nla_total_size(0) + + /* IFLA_IPTUN_FWMARK */ + nla_total_size(4) + ++ /* IFLA_IPTUN_FMRS */ ++ nla_total_size(0) + ++ ( ++ /* nest */ ++ nla_total_size(0) + ++ /* IFLA_IPTUN_FMR_IP6_PREFIX */ ++ nla_total_size(sizeof(struct in6_addr)) + ++ /* IFLA_IPTUN_FMR_IP4_PREFIX */ ++ nla_total_size(sizeof(struct in_addr)) + ++ /* IFLA_IPTUN_FMR_EA_LEN */ ++ nla_total_size(1) + ++ /* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */ ++ nla_total_size(1) + ++ /* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */ ++ nla_total_size(1) + ++ /* IFLA_IPTUN_FMR_OFFSET */ ++ nla_total_size(1) ++ ) * fmrs + + 0; + } + +@@ -2166,6 +2409,9 @@ static int ip6_tnl_fill_info(struct sk_b + { + struct ip6_tnl *tunnel = netdev_priv(dev); + struct __ip6_tnl_parm *parm = &tunnel->parms; ++ struct __ip6_tnl_fmr *c; ++ int fmrcnt = 0; ++ struct nlattr *fmrs; + + if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) || + nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) || +@@ -2175,9 +2421,27 @@ static int ip6_tnl_fill_info(struct sk_b + nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) || + nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) || + nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) || +- nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark)) ++ nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) || ++ !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS))) + goto nla_put_failure; + ++ for (c = parm->fmrs; c; c = c->next) { ++ struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt); ++ if (!fmr || ++ nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX, ++ sizeof(c->ip6_prefix), &c->ip6_prefix) || ++ nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX, ++ sizeof(c->ip4_prefix), &c->ip4_prefix) || ++ nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) || ++ nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) || ++ nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) || ++ nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset)) ++ goto nla_put_failure; ++ ++ nla_nest_end(skb, fmr); ++ } ++ nla_nest_end(skb, fmrs); ++ + if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) || + nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) || + nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) || +@@ -2217,6 +2481,7 @@ static const struct nla_policy ip6_tnl_p + [IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 }, + [IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG }, + [IFLA_IPTUN_FWMARK] = { .type = NLA_U32 }, ++ [IFLA_IPTUN_FMRS] = { .type = NLA_NESTED }, + }; + + static struct rtnl_link_ops ip6_link_ops __read_mostly = { diff --git a/target/linux/generic/pending-5.15/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.15/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch new file mode 100644 index 0000000000..d85735531b --- /dev/null +++ b/target/linux/generic/pending-5.15/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch @@ -0,0 +1,263 @@ +From: Jonas Gorski +Subject: ipv6: allow rejecting with "source address failed policy" + +RFC6204 L-14 requires rejecting traffic from invalid addresses with +ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/ +egress policy) on the LAN side, so add an appropriate rule for that. + +Signed-off-by: Jonas Gorski +--- + include/net/netns/ipv6.h | 1 + + include/uapi/linux/fib_rules.h | 4 +++ + include/uapi/linux/rtnetlink.h | 1 + + net/ipv4/fib_semantics.c | 4 +++ + net/ipv4/fib_trie.c | 1 + + net/ipv4/ipmr.c | 1 + + net/ipv6/fib6_rules.c | 4 +++ + net/ipv6/ip6mr.c | 2 ++ + net/ipv6/route.c | 58 +++++++++++++++++++++++++++++++++++++++++- + 9 files changed, 75 insertions(+), 1 deletion(-) + +--- a/include/net/netns/ipv6.h ++++ b/include/net/netns/ipv6.h +@@ -88,6 +88,7 @@ struct netns_ipv6 { + unsigned int fib6_routes_require_src; + #endif + struct rt6_info *ip6_prohibit_entry; ++ struct rt6_info *ip6_policy_failed_entry; + struct rt6_info *ip6_blk_hole_entry; + struct fib6_table *fib6_local_tbl; + struct fib_rules_ops *fib6_rules_ops; +--- a/include/uapi/linux/fib_rules.h ++++ b/include/uapi/linux/fib_rules.h +@@ -82,6 +82,10 @@ enum { + FR_ACT_BLACKHOLE, /* Drop without notification */ + FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */ + FR_ACT_PROHIBIT, /* Drop with EACCES */ ++ FR_ACT_RES9, ++ FR_ACT_RES10, ++ FR_ACT_RES11, ++ FR_ACT_POLICY_FAILED, /* Drop with EACCES */ + __FR_ACT_MAX, + }; + +--- a/include/uapi/linux/rtnetlink.h ++++ b/include/uapi/linux/rtnetlink.h +@@ -249,6 +249,7 @@ enum { + RTN_THROW, /* Not in this table */ + RTN_NAT, /* Translate this address */ + RTN_XRESOLVE, /* Use external resolver */ ++ RTN_POLICY_FAILED, /* Failed ingress/egress policy */ + __RTN_MAX + }; + +--- a/net/ipv4/fib_semantics.c ++++ b/net/ipv4/fib_semantics.c +@@ -142,6 +142,10 @@ const struct fib_prop fib_props[RTN_MAX + .error = -EINVAL, + .scope = RT_SCOPE_NOWHERE, + }, ++ [RTN_POLICY_FAILED] = { ++ .error = -EACCES, ++ .scope = RT_SCOPE_UNIVERSE, ++ }, + }; + + static void rt_fibinfo_free(struct rtable __rcu **rtp) +--- a/net/ipv4/fib_trie.c ++++ b/net/ipv4/fib_trie.c +@@ -2734,6 +2734,7 @@ static const char *const rtn_type_names[ + [RTN_THROW] = "THROW", + [RTN_NAT] = "NAT", + [RTN_XRESOLVE] = "XRESOLVE", ++ [RTN_POLICY_FAILED] = "POLICY_FAILED", + }; + + static inline const char *rtn_type(char *buf, size_t len, unsigned int t) +--- a/net/ipv4/ipmr.c ++++ b/net/ipv4/ipmr.c +@@ -175,6 +175,7 @@ static int ipmr_rule_action(struct fib_r + case FR_ACT_UNREACHABLE: + return -ENETUNREACH; + case FR_ACT_PROHIBIT: ++ case FR_ACT_POLICY_FAILED: + return -EACCES; + case FR_ACT_BLACKHOLE: + default: +--- a/net/ipv6/fib6_rules.c ++++ b/net/ipv6/fib6_rules.c +@@ -220,6 +220,10 @@ static int __fib6_rule_action(struct fib + err = -EACCES; + rt = net->ipv6.ip6_prohibit_entry; + goto discard_pkt; ++ case FR_ACT_POLICY_FAILED: ++ err = -EACCES; ++ rt = net->ipv6.ip6_policy_failed_entry; ++ goto discard_pkt; + } + + tb_id = fib_rule_get_table(rule, arg); +--- a/net/ipv6/ip6mr.c ++++ b/net/ipv6/ip6mr.c +@@ -163,6 +163,8 @@ static int ip6mr_rule_action(struct fib_ + return -ENETUNREACH; + case FR_ACT_PROHIBIT: + return -EACCES; ++ case FR_ACT_POLICY_FAILED: ++ return -EACCES; + case FR_ACT_BLACKHOLE: + default: + return -EINVAL; +--- a/net/ipv6/route.c ++++ b/net/ipv6/route.c +@@ -95,6 +95,8 @@ static int ip6_pkt_discard(struct sk_bu + static int ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb); + static int ip6_pkt_prohibit(struct sk_buff *skb); + static int ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb); ++static int ip6_pkt_policy_failed(struct sk_buff *skb); ++static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb); + static void ip6_link_failure(struct sk_buff *skb); + static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, + struct sk_buff *skb, u32 mtu, +@@ -310,6 +312,18 @@ static const struct rt6_info ip6_prohibi + .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), + }; + ++static const struct rt6_info ip6_policy_failed_entry_template = { ++ .dst = { ++ .__refcnt = ATOMIC_INIT(1), ++ .__use = 1, ++ .obsolete = DST_OBSOLETE_FORCE_CHK, ++ .error = -EACCES, ++ .input = ip6_pkt_policy_failed, ++ .output = ip6_pkt_policy_failed_out, ++ }, ++ .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), ++}; ++ + static const struct rt6_info ip6_blk_hole_entry_template = { + .dst = { + .__refcnt = ATOMIC_INIT(1), +@@ -1031,6 +1045,7 @@ static const int fib6_prop[RTN_MAX + 1] + [RTN_BLACKHOLE] = -EINVAL, + [RTN_UNREACHABLE] = -EHOSTUNREACH, + [RTN_PROHIBIT] = -EACCES, ++ [RTN_POLICY_FAILED] = -EACCES, + [RTN_THROW] = -EAGAIN, + [RTN_NAT] = -EINVAL, + [RTN_XRESOLVE] = -EINVAL, +@@ -1066,6 +1081,10 @@ static void ip6_rt_init_dst_reject(struc + rt->dst.output = ip6_pkt_prohibit_out; + rt->dst.input = ip6_pkt_prohibit; + break; ++ case RTN_POLICY_FAILED: ++ rt->dst.output = ip6_pkt_policy_failed_out; ++ rt->dst.input = ip6_pkt_policy_failed; ++ break; + case RTN_THROW: + case RTN_UNREACHABLE: + default: +@@ -4448,6 +4467,17 @@ static int ip6_pkt_prohibit_out(struct n + return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES); + } + ++static int ip6_pkt_policy_failed(struct sk_buff *skb) ++{ ++ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES); ++} ++ ++static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb) ++{ ++ skb->dev = skb_dst(skb)->dev; ++ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES); ++} ++ + /* + * Allocate a dst for local (unicast / anycast) address. + */ +@@ -4928,7 +4958,8 @@ static int rtm_to_fib6_config(struct sk_ + if (rtm->rtm_type == RTN_UNREACHABLE || + rtm->rtm_type == RTN_BLACKHOLE || + rtm->rtm_type == RTN_PROHIBIT || +- rtm->rtm_type == RTN_THROW) ++ rtm->rtm_type == RTN_THROW || ++ rtm->rtm_type == RTN_POLICY_FAILED) + cfg->fc_flags |= RTF_REJECT; + + if (rtm->rtm_type == RTN_LOCAL) +@@ -6127,6 +6158,8 @@ static int ip6_route_dev_notify(struct n + #ifdef CONFIG_IPV6_MULTIPLE_TABLES + net->ipv6.ip6_prohibit_entry->dst.dev = dev; + net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev); ++ net->ipv6.ip6_policy_failed_entry->dst.dev = dev; ++ net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev); + net->ipv6.ip6_blk_hole_entry->dst.dev = dev; + net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); + #endif +@@ -6138,6 +6171,7 @@ static int ip6_route_dev_notify(struct n + in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev); + #ifdef CONFIG_IPV6_MULTIPLE_TABLES + in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev); ++ in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev); + in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev); + #endif + } +@@ -6329,6 +6363,8 @@ static int __net_init ip6_route_net_init + + #ifdef CONFIG_IPV6_MULTIPLE_TABLES + net->ipv6.fib6_has_custom_rules = false; ++ ++ + net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template, + sizeof(*net->ipv6.ip6_prohibit_entry), + GFP_KERNEL); +@@ -6339,11 +6375,21 @@ static int __net_init ip6_route_net_init + ip6_template_metrics, true); + INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached); + ++ net->ipv6.ip6_policy_failed_entry = ++ kmemdup(&ip6_policy_failed_entry_template, ++ sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL); ++ if (!net->ipv6.ip6_policy_failed_entry) ++ goto out_ip6_prohibit_entry; ++ net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops; ++ dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst, ++ ip6_template_metrics, true); ++ INIT_LIST_HEAD(&net->ipv6.ip6_policy_failed_entry->rt6i_uncached); ++ + net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template, + sizeof(*net->ipv6.ip6_blk_hole_entry), + GFP_KERNEL); + if (!net->ipv6.ip6_blk_hole_entry) +- goto out_ip6_prohibit_entry; ++ goto out_ip6_policy_failed_entry; + net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops; + dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst, + ip6_template_metrics, true); +@@ -6370,6 +6416,8 @@ out: + return ret; + + #ifdef CONFIG_IPV6_MULTIPLE_TABLES ++out_ip6_policy_failed_entry: ++ kfree(net->ipv6.ip6_policy_failed_entry); + out_ip6_prohibit_entry: + kfree(net->ipv6.ip6_prohibit_entry); + out_ip6_null_entry: +@@ -6389,6 +6437,7 @@ static void __net_exit ip6_route_net_exi + kfree(net->ipv6.ip6_null_entry); + #ifdef CONFIG_IPV6_MULTIPLE_TABLES + kfree(net->ipv6.ip6_prohibit_entry); ++ kfree(net->ipv6.ip6_policy_failed_entry); + kfree(net->ipv6.ip6_blk_hole_entry); + #endif + dst_entries_destroy(&net->ipv6.ip6_dst_ops); +@@ -6466,6 +6515,9 @@ void __init ip6_route_init_special_entri + init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); + init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev; + init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); ++ init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev; ++ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev = ++ in6_dev_get(init_net.loopback_dev); + #endif + } + diff --git a/target/linux/generic/pending-5.15/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-5.15/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch new file mode 100644 index 0000000000..0e7f35db89 --- /dev/null +++ b/target/linux/generic/pending-5.15/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch @@ -0,0 +1,50 @@ +From: Jonas Gorski +Subject: net: provide defines for _POLICY_FAILED until all code is updated + +Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination +unreachable, conflicting with our name. + +Add appropriate defines to allow our code to build with the new +name until we have updated our local patches for older kernels +and userspace packages. + +Signed-off-by: Jonas Gorski +--- + include/uapi/linux/fib_rules.h | 2 ++ + include/uapi/linux/icmpv6.h | 2 ++ + include/uapi/linux/rtnetlink.h | 2 ++ + 3 files changed, 6 insertions(+) + +--- a/include/uapi/linux/fib_rules.h ++++ b/include/uapi/linux/fib_rules.h +@@ -89,6 +89,8 @@ enum { + __FR_ACT_MAX, + }; + ++#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED ++ + #define FR_ACT_MAX (__FR_ACT_MAX - 1) + + #endif +--- a/include/uapi/linux/icmpv6.h ++++ b/include/uapi/linux/icmpv6.h +@@ -126,6 +126,8 @@ struct icmp6hdr { + #define ICMPV6_POLICY_FAIL 5 + #define ICMPV6_REJECT_ROUTE 6 + ++#define ICMPV6_FAILED_POLICY ICMPV6_POLICY_FAIL ++ + /* + * Codes for Time Exceeded + */ +--- a/include/uapi/linux/rtnetlink.h ++++ b/include/uapi/linux/rtnetlink.h +@@ -253,6 +253,8 @@ enum { + __RTN_MAX + }; + ++#define RTN_FAILED_POLICY RTN_POLICY_FAILED ++ + #define RTN_MAX (__RTN_MAX - 1) + + diff --git a/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch new file mode 100644 index 0000000000..e64e0421e1 --- /dev/null +++ b/target/linux/generic/pending-5.15/680-NET-skip-GRO-for-foreign-MAC-addresses.patch @@ -0,0 +1,149 @@ +From: Felix Fietkau +Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses + +Signed-off-by: Felix Fietkau +--- + include/linux/netdevice.h | 2 ++ + include/linux/skbuff.h | 3 ++- + net/core/dev.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++ + net/ethernet/eth.c | 18 +++++++++++++++++- + 4 files changed, 69 insertions(+), 2 deletions(-) + +--- a/include/linux/netdevice.h ++++ b/include/linux/netdevice.h +@@ -2036,6 +2036,8 @@ struct net_device { + struct netdev_hw_addr_list mc; + struct netdev_hw_addr_list dev_addrs; + ++ unsigned char local_addr_mask[MAX_ADDR_LEN]; ++ + #ifdef CONFIG_SYSFS + struct kset *queues_kset; + #endif +--- a/include/linux/skbuff.h ++++ b/include/linux/skbuff.h +@@ -858,6 +858,7 @@ struct sk_buff { + #ifdef CONFIG_TLS_DEVICE + __u8 decrypted:1; + #endif ++ __u8 gro_skip:1; + + #ifdef CONFIG_NET_SCHED + __u16 tc_index; /* traffic control index */ +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -6062,6 +6062,9 @@ static enum gro_result dev_gro_receive(s + int same_flow; + int grow; + ++ if (skb->gro_skip) ++ goto normal; ++ + if (netif_elide_gro(skb->dev)) + goto normal; + +@@ -8039,6 +8042,48 @@ static void __netdev_adjacent_dev_unlink + &upper_dev->adj_list.lower); + } + ++static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr, ++ struct net_device *dev) ++{ ++ int i; ++ ++ for (i = 0; i < dev->addr_len; i++) ++ mask[i] |= addr[i] ^ dev->dev_addr[i]; ++} ++ ++static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev, ++ struct net_device *lower) ++{ ++ struct net_device *cur; ++ struct list_head *iter; ++ ++ netdev_for_each_upper_dev_rcu(dev, cur, iter) { ++ __netdev_addr_mask(mask, cur->dev_addr, lower); ++ __netdev_upper_mask(mask, cur, lower); ++ } ++} ++ ++static void __netdev_update_addr_mask(struct net_device *dev) ++{ ++ unsigned char mask[MAX_ADDR_LEN]; ++ struct net_device *cur; ++ struct list_head *iter; ++ ++ memset(mask, 0, sizeof(mask)); ++ __netdev_upper_mask(mask, dev, dev); ++ memcpy(dev->local_addr_mask, mask, dev->addr_len); ++ ++ netdev_for_each_lower_dev(dev, cur, iter) ++ __netdev_update_addr_mask(cur); ++} ++ ++static void netdev_update_addr_mask(struct net_device *dev) ++{ ++ rcu_read_lock(); ++ __netdev_update_addr_mask(dev); ++ rcu_read_unlock(); ++} ++ + static int __netdev_upper_dev_link(struct net_device *dev, + struct net_device *upper_dev, bool master, + void *upper_priv, void *upper_info, +@@ -8090,6 +8135,7 @@ static int __netdev_upper_dev_link(struc + if (ret) + return ret; + ++ netdev_update_addr_mask(dev); + ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, + &changeupper_info.info); + ret = notifier_to_errno(ret); +@@ -8186,6 +8232,7 @@ static void __netdev_upper_dev_unlink(st + + __netdev_adjacent_dev_unlink_neighbour(dev, upper_dev); + ++ netdev_update_addr_mask(dev); + call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, + &changeupper_info.info); + +@@ -8972,6 +9019,7 @@ int dev_set_mac_address(struct net_devic + if (err) + return err; + dev->addr_assign_type = NET_ADDR_SET; ++ netdev_update_addr_mask(dev); + call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); + add_device_randomness(dev->dev_addr, dev->addr_len); + return 0; +--- a/net/ethernet/eth.c ++++ b/net/ethernet/eth.c +@@ -143,6 +143,18 @@ u32 eth_get_headlen(const struct net_dev + } + EXPORT_SYMBOL(eth_get_headlen); + ++static inline bool ++eth_check_local_mask(const void *addr1, const void *addr2, const void *mask) ++{ ++ const u16 *a1 = addr1; ++ const u16 *a2 = addr2; ++ const u16 *m = mask; ++ ++ return (((a1[0] ^ a2[0]) & ~m[0]) | ++ ((a1[1] ^ a2[1]) & ~m[1]) | ++ ((a1[2] ^ a2[2]) & ~m[2])); ++} ++ + /** + * eth_type_trans - determine the packet's protocol ID. + * @skb: received socket data +@@ -174,6 +186,10 @@ __be16 eth_type_trans(struct sk_buff *sk + } else { + skb->pkt_type = PACKET_OTHERHOST; + } ++ ++ if (eth_check_local_mask(eth->h_dest, dev->dev_addr, ++ dev->local_addr_mask)) ++ skb->gro_skip = 1; + } + + /* diff --git a/target/linux/generic/pending-5.15/682-of_net-add-mac-address-increment-support.patch b/target/linux/generic/pending-5.15/682-of_net-add-mac-address-increment-support.patch new file mode 100644 index 0000000000..82e81f37c5 --- /dev/null +++ b/target/linux/generic/pending-5.15/682-of_net-add-mac-address-increment-support.patch @@ -0,0 +1,89 @@ +From 844c273286f328acf0dab5fbd5d864366b4904dc Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 30 Mar 2021 18:21:14 +0200 +Subject: [PATCH] of_net: add mac-address-increment support + +Lots of embedded devices use the mac-address of other interface +extracted from nvmem cells and increments it by one or two. Add two +bindings to integrate this and directly use the right mac-address for +the interface. Some example are some routers that use the gmac +mac-address stored in the art partition and increments it by one for the +wifi. mac-address-increment-byte bindings is used to tell what byte of +the mac-address has to be increased (if not defined the last byte is +increased) and mac-address-increment tells how much the byte decided +early has to be increased. + +Signed-off-by: Ansuel Smith +--- + drivers/of/of_net.c | 43 +++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 39 insertions(+), 4 deletions(-) + +--- a/drivers/of/of_net.c ++++ b/drivers/of/of_net.c +@@ -115,27 +115,62 @@ static int of_get_mac_addr_nvmem(struct + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. + * ++ * DT can tell the system to increment the mac-address after is extracted by ++ * using: ++ * - mac-address-increment-byte to decide what byte to increase ++ * (if not defined is increased the last byte) ++ * - mac-address-increment to decide how much to increase. The value WILL ++ * overflow to other bytes if the increment is over 255 or the total ++ * increment will exceed 255 of the current byte. ++ * (example 00:01:02:03:04:ff + 1 == 00:01:02:03:05:00) ++ * (example 00:01:02:03:04:fe + 5 == 00:01:02:03:05:03) ++ * + * Return: 0 on success and errno in case of error. + */ + int of_get_mac_address(struct device_node *np, u8 *addr) + { ++ u32 inc_idx, mac_inc, mac_val; + int ret; + ++ /* Check first if the increment byte is present and valid. ++ * If not set assume to increment the last byte if found. ++ */ ++ if (of_property_read_u32(np, "mac-address-increment-byte", &inc_idx)) ++ inc_idx = 5; ++ if (inc_idx < 3 || inc_idx > 5) ++ return -EINVAL; ++ + if (!np) + return -ENODEV; + + ret = of_get_mac_addr(np, "mac-address", addr); + if (!ret) +- return 0; ++ goto found; + + ret = of_get_mac_addr(np, "local-mac-address", addr); + if (!ret) +- return 0; ++ goto found; + + ret = of_get_mac_addr(np, "address", addr); + if (!ret) +- return 0; ++ goto found; ++ ++ ret = of_get_mac_addr_nvmem(np, addr); ++ if (ret) ++ return ret; ++ ++found: ++ if (!of_property_read_u32(np, "mac-address-increment", &mac_inc)) { ++ /* Convert to a contiguous value */ ++ mac_val = (addr[3] << 16) + (addr[4] << 8) + addr[5]; ++ mac_val += mac_inc << 8 * (5-inc_idx); ++ ++ /* Apply the incremented value handling overflow case */ ++ addr[3] = (mac_val >> 16) & 0xff; ++ addr[4] = (mac_val >> 8) & 0xff; ++ addr[5] = (mac_val >> 0) & 0xff; ++ } + +- return of_get_mac_addr_nvmem(np, addr); ++ return ret; + } + EXPORT_SYMBOL(of_get_mac_address); diff --git a/target/linux/generic/pending-5.15/683-of_net-add-mac-address-to-of-tree.patch b/target/linux/generic/pending-5.15/683-of_net-add-mac-address-to-of-tree.patch new file mode 100644 index 0000000000..03cd763d9d --- /dev/null +++ b/target/linux/generic/pending-5.15/683-of_net-add-mac-address-to-of-tree.patch @@ -0,0 +1,38 @@ +--- a/drivers/of/of_net.c ++++ b/drivers/of/of_net.c +@@ -95,6 +95,27 @@ static int of_get_mac_addr_nvmem(struct + return 0; + } + ++static int of_add_mac_address(struct device_node *np, u8* addr) ++{ ++ struct property *prop; ++ ++ prop = kzalloc(sizeof(*prop), GFP_KERNEL); ++ if (!prop) ++ return -ENOMEM; ++ ++ prop->name = "mac-address"; ++ prop->length = ETH_ALEN; ++ prop->value = kmemdup(addr, ETH_ALEN, GFP_KERNEL); ++ if (!prop->value || of_update_property(np, prop)) ++ goto free; ++ ++ return 0; ++free: ++ kfree(prop->value); ++ kfree(prop); ++ return -ENOMEM; ++} ++ + /** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC +@@ -171,6 +192,7 @@ found: + addr[5] = (mac_val >> 0) & 0xff; + } + ++ of_add_mac_address(np, addr); + return ret; + } + EXPORT_SYMBOL(of_get_mac_address); diff --git a/target/linux/generic/pending-5.15/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch b/target/linux/generic/pending-5.15/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch new file mode 100644 index 0000000000..ff090f07f1 --- /dev/null +++ b/target/linux/generic/pending-5.15/700-net-ethernet-mtk_eth_soc-avoid-creating-duplicate-of.patch @@ -0,0 +1,26 @@ +From: Felix Fietkau +Date: Thu, 8 Jul 2021 07:08:29 +0200 +Subject: [PATCH] net: ethernet: mtk_eth_soc: avoid creating duplicate offload + entries + +Sometimes multiple CLS_REPLACE calls are issued for the same connection. +rhashtable_insert_fast does not check for these duplicates, so multiple +hardware flow entries can be created. +Fix this by checking for an existing entry early + +Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") +Signed-off-by: Felix Fietkau +--- + +--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -187,6 +187,9 @@ mtk_flow_offload_replace(struct mtk_eth + int hash; + int i; + ++ if (rhashtable_lookup(ð->flow_table, &f->cookie, mtk_flow_ht_params)) ++ return -EEXIST; ++ + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) { + struct flow_match_meta match; + diff --git a/target/linux/generic/pending-5.15/701-net-ethernet-mtk_eth_soc-add-ipv6-flow-offloading-support.patch b/target/linux/generic/pending-5.15/701-net-ethernet-mtk_eth_soc-add-ipv6-flow-offloading-support.patch new file mode 100644 index 0000000000..7140c6877e --- /dev/null +++ b/target/linux/generic/pending-5.15/701-net-ethernet-mtk_eth_soc-add-ipv6-flow-offloading-support.patch @@ -0,0 +1,65 @@ +--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c ++++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +@@ -7,6 +7,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -20,6 +21,11 @@ struct mtk_flow_data { + __be32 src_addr; + __be32 dst_addr; + } v4; ++ ++ struct { ++ struct in6_addr src_addr; ++ struct in6_addr dst_addr; ++ } v6; + }; + + __be16 src_port; +@@ -64,6 +70,14 @@ mtk_flow_set_ipv4_addr(struct mtk_foe_en + data->v4.dst_addr, data->dst_port); + } + ++static int ++mtk_flow_set_ipv6_addr(struct mtk_foe_entry *foe, struct mtk_flow_data *data) ++{ ++ return mtk_foe_entry_set_ipv6_tuple(foe, ++ data->v6.src_addr.s6_addr32, data->src_port, ++ data->v6.dst_addr.s6_addr32, data->dst_port); ++} ++ + static void + mtk_flow_offload_mangle_eth(const struct flow_action_entry *act, void *eth) + { +@@ -254,6 +268,9 @@ mtk_flow_offload_replace(struct mtk_eth + case FLOW_DISSECTOR_KEY_IPV4_ADDRS: + offload_type = MTK_PPE_PKT_TYPE_IPV4_HNAPT; + break; ++ case FLOW_DISSECTOR_KEY_IPV6_ADDRS: ++ offload_type = MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T; ++ break; + default: + return -EOPNOTSUPP; + } +@@ -289,6 +306,17 @@ mtk_flow_offload_replace(struct mtk_eth + mtk_flow_set_ipv4_addr(&foe, &data, false); + } + ++ if (addr_type == FLOW_DISSECTOR_KEY_IPV6_ADDRS) { ++ struct flow_match_ipv6_addrs addrs; ++ ++ flow_rule_match_ipv6_addrs(rule, &addrs); ++ ++ data.v6.src_addr = addrs.key->src; ++ data.v6.dst_addr = addrs.key->dst; ++ ++ mtk_flow_set_ipv6_addr(&foe, &data); ++ } ++ + flow_action_for_each(i, act, &rule->action) { + if (act->id != FLOW_ACTION_MANGLE) + continue; diff --git a/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch b/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch new file mode 100644 index 0000000000..da9c040322 --- /dev/null +++ b/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch @@ -0,0 +1,41 @@ +From: Felix Fietkau +Date: Mon, 21 Mar 2022 20:39:59 +0100 +Subject: [PATCH] net: ethernet: mtk_eth_soc: enable threaded NAPI + +This can improve performance under load by ensuring that NAPI processing is +not pinned on CPU 0. + +Signed-off-by: Felix Fietkau +--- + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2171,8 +2171,8 @@ static irqreturn_t mtk_handle_irq_rx(int + + eth->rx_events++; + if (likely(napi_schedule_prep(ð->rx_napi))) { +- __napi_schedule(ð->rx_napi); + mtk_rx_irq_disable(eth, MTK_RX_DONE_INT); ++ __napi_schedule(ð->rx_napi); + } + + return IRQ_HANDLED; +@@ -2184,8 +2184,8 @@ static irqreturn_t mtk_handle_irq_tx(int + + eth->tx_events++; + if (likely(napi_schedule_prep(ð->tx_napi))) { +- __napi_schedule(ð->tx_napi); + mtk_tx_irq_disable(eth, MTK_TX_DONE_INT); ++ __napi_schedule(ð->tx_napi); + } + + return IRQ_HANDLED; +@@ -3229,6 +3229,8 @@ static int mtk_probe(struct platform_dev + * for NAPI to work + */ + init_dummy_netdev(ð->dummy_dev); ++ eth->dummy_dev.threaded = 1; ++ strcpy(eth->dummy_dev.name, "mtk_eth"); + netif_napi_add(ð->dummy_dev, ð->tx_napi, mtk_napi_tx, + MTK_NAPI_WEIGHT); + netif_napi_add(ð->dummy_dev, ð->rx_napi, mtk_napi_rx, diff --git a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch new file mode 100644 index 0000000000..52350ecccc --- /dev/null +++ b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -0,0 +1,38 @@ +From: Gabor Juhos +Subject: generic: add detach callback to struct phy_driver + +lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867 + +Signed-off-by: Gabor Juhos +--- + drivers/net/phy/phy_device.c | 3 +++ + include/linux/phy.h | 6 ++++++ + 2 files changed, 9 insertions(+) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -1651,6 +1651,9 @@ void phy_detach(struct phy_device *phyde + struct module *ndev_owner = NULL; + struct mii_bus *bus; + ++ if (phydev->drv && phydev->drv->detach) ++ phydev->drv->detach(phydev); ++ + if (phydev->sysfs_links) { + if (dev) + sysfs_remove_link(&dev->dev.kobj, "phydev"); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -765,6 +765,12 @@ struct phy_driver { + /** @handle_interrupt: Override default interrupt handling */ + irqreturn_t (*handle_interrupt)(struct phy_device *phydev); + ++ /* ++ * Called before an ethernet device is detached ++ * from the PHY. ++ */ ++ void (*detach)(struct phy_device *phydev); ++ + /** @remove: Clears up any memory if needed */ + void (*remove)(struct phy_device *phydev); + diff --git a/target/linux/generic/pending-5.15/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-5.15/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch new file mode 100644 index 0000000000..ecd6e9e7a2 --- /dev/null +++ b/target/linux/generic/pending-5.15/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch @@ -0,0 +1,177 @@ +From: Felix Fietkau +Date: Fri, 27 Aug 2021 12:22:32 +0200 +Subject: [PATCH] bridge: add knob for filtering rx/tx BPDU packets on a port + +Some devices (e.g. wireless APs) can't have devices behind them be part of +a bridge topology with redundant links, due to address limitations. +Additionally, broadcast traffic on these devices is somewhat expensive, due to +the low data rate and wakeups of clients in powersave mode. +This knob can be used to ensure that BPDU packets are never sent or forwarded +to/from these devices + +Signed-off-by: Felix Fietkau +--- + +--- a/include/linux/if_bridge.h ++++ b/include/linux/if_bridge.h +@@ -56,6 +56,7 @@ struct br_ip_list { + #define BR_MRP_AWARE BIT(17) + #define BR_MRP_LOST_CONT BIT(18) + #define BR_MRP_LOST_IN_CONT BIT(19) ++#define BR_BPDU_FILTER BIT(20) + + #define BR_DEFAULT_AGEING_TIME (300 * HZ) + +--- a/net/bridge/br_forward.c ++++ b/net/bridge/br_forward.c +@@ -191,6 +191,7 @@ out: + void br_flood(struct net_bridge *br, struct sk_buff *skb, + enum br_pkt_type pkt_type, bool local_rcv, bool local_orig) + { ++ const unsigned char *dest = eth_hdr(skb)->h_dest; + struct net_bridge_port *prev = NULL; + struct net_bridge_port *p; + +@@ -206,6 +207,10 @@ void br_flood(struct net_bridge *br, str + case BR_PKT_MULTICAST: + if (!(p->flags & BR_MCAST_FLOOD) && skb->dev != br->dev) + continue; ++ if ((p->flags & BR_BPDU_FILTER) && ++ unlikely(is_link_local_ether_addr(dest) && ++ dest[5] == 0)) ++ continue; + break; + case BR_PKT_BROADCAST: + if (!(p->flags & BR_BCAST_FLOOD) && skb->dev != br->dev) +--- a/net/bridge/br_input.c ++++ b/net/bridge/br_input.c +@@ -305,6 +305,8 @@ static rx_handler_result_t br_handle_fra + fwd_mask |= p->group_fwd_mask; + switch (dest[5]) { + case 0x00: /* Bridge Group Address */ ++ if (p->flags & BR_BPDU_FILTER) ++ goto drop; + /* If STP is turned off, + then must forward to keep loop detection */ + if (p->br->stp_enabled == BR_NO_STP || +--- a/net/bridge/br_sysfs_if.c ++++ b/net/bridge/br_sysfs_if.c +@@ -233,6 +233,7 @@ BRPORT_ATTR_FLAG(multicast_flood, BR_MCA + BRPORT_ATTR_FLAG(broadcast_flood, BR_BCAST_FLOOD); + BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS); + BRPORT_ATTR_FLAG(isolated, BR_ISOLATED); ++BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER); + + #ifdef CONFIG_BRIDGE_IGMP_SNOOPING + static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf) +@@ -285,6 +286,7 @@ static const struct brport_attribute *br + &brport_attr_group_fwd_mask, + &brport_attr_neigh_suppress, + &brport_attr_isolated, ++ &brport_attr_bpdu_filter, + &brport_attr_backup_port, + NULL + }; +--- a/net/bridge/br_stp_bpdu.c ++++ b/net/bridge/br_stp_bpdu.c +@@ -80,7 +80,8 @@ void br_send_config_bpdu(struct net_brid + { + unsigned char buf[35]; + +- if (p->br->stp_enabled != BR_KERNEL_STP) ++ if (p->br->stp_enabled != BR_KERNEL_STP || ++ (p->flags & BR_BPDU_FILTER)) + return; + + buf[0] = 0; +@@ -127,7 +128,8 @@ void br_send_tcn_bpdu(struct net_bridge_ + { + unsigned char buf[4]; + +- if (p->br->stp_enabled != BR_KERNEL_STP) ++ if (p->br->stp_enabled != BR_KERNEL_STP || ++ (p->flags & BR_BPDU_FILTER)) + return; + + buf[0] = 0; +@@ -172,6 +174,9 @@ void br_stp_rcv(const struct stp_proto * + if (!(br->dev->flags & IFF_UP)) + goto out; + ++ if (p->flags & BR_BPDU_FILTER) ++ goto out; ++ + if (p->state == BR_STATE_DISABLED) + goto out; + +--- a/include/uapi/linux/if_link.h ++++ b/include/uapi/linux/if_link.h +@@ -524,6 +524,7 @@ enum { + IFLA_BRPORT_BACKUP_PORT, + IFLA_BRPORT_MRP_RING_OPEN, + IFLA_BRPORT_MRP_IN_OPEN, ++ IFLA_BRPORT_BPDU_FILTER, + __IFLA_BRPORT_MAX + }; + #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) +--- a/net/bridge/br_netlink.c ++++ b/net/bridge/br_netlink.c +@@ -137,6 +137,7 @@ static inline size_t br_port_info_size(v + + nla_total_size(1) /* IFLA_BRPORT_VLAN_TUNNEL */ + + nla_total_size(1) /* IFLA_BRPORT_NEIGH_SUPPRESS */ + + nla_total_size(1) /* IFLA_BRPORT_ISOLATED */ ++ + nla_total_size(1) /* IFLA_BRPORT_BPDU_FILTER */ + + nla_total_size(sizeof(struct ifla_bridge_id)) /* IFLA_BRPORT_ROOT_ID */ + + nla_total_size(sizeof(struct ifla_bridge_id)) /* IFLA_BRPORT_BRIDGE_ID */ + + nla_total_size(sizeof(u16)) /* IFLA_BRPORT_DESIGNATED_PORT */ +@@ -220,7 +221,8 @@ static int br_port_fill_attrs(struct sk_ + BR_MRP_LOST_CONT)) || + nla_put_u8(skb, IFLA_BRPORT_MRP_IN_OPEN, + !!(p->flags & BR_MRP_LOST_IN_CONT)) || +- nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED))) ++ nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)) || ++ nla_put_u8(skb, IFLA_BRPORT_BPDU_FILTER, !!(p->flags & BR_BPDU_FILTER))) + return -EMSGSIZE; + + timerval = br_timer_value(&p->message_age_timer); +@@ -728,6 +730,7 @@ static const struct nla_policy br_port_p + [IFLA_BRPORT_NEIGH_SUPPRESS] = { .type = NLA_U8 }, + [IFLA_BRPORT_ISOLATED] = { .type = NLA_U8 }, + [IFLA_BRPORT_BACKUP_PORT] = { .type = NLA_U32 }, ++ [IFLA_BRPORT_BPDU_FILTER] = { .type = NLA_U8 }, + }; + + /* Change the state of the port and notify spanning tree */ +@@ -826,6 +829,10 @@ static int br_setport(struct net_bridge_ + if (err) + return err; + ++ err = br_set_port_flag(p, tb, IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER); ++ if (err) ++ return err; ++ + br_vlan_tunnel_old = (p->flags & BR_VLAN_TUNNEL) ? true : false; + err = br_set_port_flag(p, tb, IFLA_BRPORT_VLAN_TUNNEL, BR_VLAN_TUNNEL); + if (err) +--- a/net/core/rtnetlink.c ++++ b/net/core/rtnetlink.c +@@ -55,7 +55,7 @@ + #include + + #define RTNL_MAX_TYPE 50 +-#define RTNL_SLAVE_MAX_TYPE 36 ++#define RTNL_SLAVE_MAX_TYPE 37 + + struct rtnl_link { + rtnl_doit_func doit; +@@ -4684,7 +4684,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu + brport_nla_put_flag(skb, flags, mask, + IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) || + brport_nla_put_flag(skb, flags, mask, +- IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD)) { ++ IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD) || ++ brport_nla_put_flag(skb, flags, mask, ++ IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER)) { + nla_nest_cancel(skb, protinfo); + goto nla_put_failure; + } diff --git a/target/linux/generic/pending-5.15/730-net-phy-at803x-fix-feature-detection.patch b/target/linux/generic/pending-5.15/730-net-phy-at803x-fix-feature-detection.patch new file mode 100644 index 0000000000..c49bb19601 --- /dev/null +++ b/target/linux/generic/pending-5.15/730-net-phy-at803x-fix-feature-detection.patch @@ -0,0 +1,66 @@ +From 97ca310aa18a93329ef5cd68c20de89761962f45 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 13 Jun 2021 12:19:36 +0200 +Subject: [PATCH] net: phy: at803x: fix feature detection + +AR8031/AR8033 have different status registers for copper +and fiber operation. However, the extended status register +is the same for both operation modes. + +As a result of that, ESTATUS_1000_XFULL is set to 1 even when +operating in copper TP mode. + +Remove this mode from the supported link modes, as this driver +currently only supports copper operation. + +Signed-off-by: David Bauer +--- + drivers/net/phy/at803x.c | 30 +++++++++++++++++++++++++++++- + 1 file changed, 29 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1032,6 +1032,34 @@ static int at803x_set_tunable(struct phy + } + } + ++static int at803x_get_features(struct phy_device *phydev) ++{ ++ int err; ++ ++ err = genphy_read_abilities(phydev); ++ if (err) ++ return err; ++ ++ if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID)) ++ return 0; ++ ++ /* AR8031/AR8033 have different status registers ++ * for copper and fiber operation. However, the ++ * extended status register is the same for both ++ * operation modes. ++ * ++ * As a result of that, ESTATUS_1000_XFULL is set ++ * to 1 even when operating in copper TP mode. ++ * ++ * Remove this mode from the supported link modes, ++ * as this driver currently only supports copper ++ * operation. ++ */ ++ linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, ++ phydev->supported); ++ return 0; ++} ++ + static int at803x_cable_test_result_trans(u16 status) + { + switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { +@@ -1364,7 +1392,7 @@ static struct phy_driver at803x_driver[] + .resume = at803x_resume, + .read_page = at803x_read_page, + .write_page = at803x_write_page, +- /* PHY_GBIT_FEATURES */ ++ .get_features = at803x_get_features, + .read_status = at803x_read_status, + .aneg_done = at803x_aneg_done, + .ack_interrupt = &at803x_ack_interrupt, diff --git a/target/linux/generic/pending-5.15/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch b/target/linux/generic/pending-5.15/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch new file mode 100644 index 0000000000..16be95ea38 --- /dev/null +++ b/target/linux/generic/pending-5.15/760-net-dsa-mv88e6xxx-fix-vlan-setup.patch @@ -0,0 +1,27 @@ +From a1b291f3f6c80a6c5ccad7283fc472d77a2a4763 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Sun, 22 Dec 2019 12:40:11 +0000 +Subject: [PATCH] net: dsa: mv88e6xxx: fix vlan setup + +Provide an option that drivers can set to indicate they want to receive +vlan configuration even when vlan filtering is disabled. This is safe +for Marvell DSA bridges, which do not look up ingress traffic in the +VTU if the port is in 8021Q disabled state. Whether this change is +suitable for all DSA bridges is not known. + +Signed-off-by: Russell King +Signed-off-by: DENG Qingfang +--- + drivers/net/dsa/mv88e6xxx/chip.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -2869,6 +2869,7 @@ static int mv88e6xxx_setup(struct dsa_sw + + chip->ds = ds; + ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip); ++ ds->configure_vlan_while_not_filtering = true; + + mv88e6xxx_reg_lock(chip); + diff --git a/target/linux/generic/pending-5.15/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch b/target/linux/generic/pending-5.15/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch new file mode 100644 index 0000000000..fbc8342b0e --- /dev/null +++ b/target/linux/generic/pending-5.15/762-net-bridge-switchdev-Refactor-br_switchdev_fdb_notif.patch @@ -0,0 +1,77 @@ +From 46fe6cecb296d850c1ee2b333e57093ac4b733f3 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:09 +0100 +Subject: [PATCH] net: bridge: switchdev: Refactor br_switchdev_fdb_notify + +Instead of having to add more and more arguments to +br_switchdev_fdb_call_notifiers, get rid of it and build the info +struct directly in br_switchdev_fdb_notify. + +Signed-off-by: Tobias Waldekranz +Reviewed-by: Vladimir Oltean +--- + net/bridge/br_switchdev.c | 41 +++++++++++---------------------------- + 1 file changed, 11 insertions(+), 30 deletions(-) + +--- a/net/bridge/br_switchdev.c ++++ b/net/bridge/br_switchdev.c +@@ -102,25 +102,16 @@ int br_switchdev_set_port_flag(struct ne + return 0; + } + +-static void +-br_switchdev_fdb_call_notifiers(bool adding, const unsigned char *mac, +- u16 vid, struct net_device *dev, +- bool added_by_user, bool offloaded) +-{ +- struct switchdev_notifier_fdb_info info; +- unsigned long notifier_type; +- +- info.addr = mac; +- info.vid = vid; +- info.added_by_user = added_by_user; +- info.offloaded = offloaded; +- notifier_type = adding ? SWITCHDEV_FDB_ADD_TO_DEVICE : SWITCHDEV_FDB_DEL_TO_DEVICE; +- call_switchdev_notifiers(notifier_type, dev, &info.info, NULL); +-} +- + void + br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type) + { ++ struct switchdev_notifier_fdb_info info = { ++ .addr = fdb->key.addr.addr, ++ .vid = fdb->key.vlan_id, ++ .added_by_user = test_bit(BR_FDB_ADDED_BY_USER, &fdb->flags), ++ .offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags), ++ }; ++ + if (!fdb->dst) + return; + if (test_bit(BR_FDB_LOCAL, &fdb->flags)) +@@ -128,22 +119,12 @@ br_switchdev_fdb_notify(const struct net + + switch (type) { + case RTM_DELNEIGH: +- br_switchdev_fdb_call_notifiers(false, fdb->key.addr.addr, +- fdb->key.vlan_id, +- fdb->dst->dev, +- test_bit(BR_FDB_ADDED_BY_USER, +- &fdb->flags), +- test_bit(BR_FDB_OFFLOADED, +- &fdb->flags)); ++ call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE, ++ fdb->dst->dev, &info.info, NULL); + break; + case RTM_NEWNEIGH: +- br_switchdev_fdb_call_notifiers(true, fdb->key.addr.addr, +- fdb->key.vlan_id, +- fdb->dst->dev, +- test_bit(BR_FDB_ADDED_BY_USER, +- &fdb->flags), +- test_bit(BR_FDB_OFFLOADED, +- &fdb->flags)); ++ call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE, ++ fdb->dst->dev, &info.info, NULL); + break; + } + } diff --git a/target/linux/generic/pending-5.15/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch b/target/linux/generic/pending-5.15/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch new file mode 100644 index 0000000000..41374c88df --- /dev/null +++ b/target/linux/generic/pending-5.15/763-net-bridge-switchdev-Include-local-flag-in-FDB-notif.patch @@ -0,0 +1,42 @@ +From ec5be4f79026282925ae383caa431a8d41e3456a Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:10 +0100 +Subject: [PATCH] net: bridge: switchdev: Include local flag in FDB + notifications + +Some switchdev drivers, notably DSA, ignore all dynamically learned +address notifications (!added_by_user) as these are autonomously added +by the switch. Previously, such a notification was indistinguishable +from a local address notification. Include a local bit in the +notification so that the two classes can be discriminated. + +This allows DSA-like devices to add local addresses to the hardware +FDB (with the CPU as the destination), thereby avoiding flows towards +the CPU being flooded by the switch as unknown unicast. + +Signed-off-by: Tobias Waldekranz +--- + include/net/switchdev.h | 1 + + net/bridge/br_switchdev.c | 1 + + 2 files changed, 2 insertions(+) + +--- a/include/net/switchdev.h ++++ b/include/net/switchdev.h +@@ -224,6 +224,7 @@ struct switchdev_notifier_fdb_info { + const unsigned char *addr; + u16 vid; + u8 added_by_user:1, ++ local:1, + offloaded:1; + }; + +--- a/net/bridge/br_switchdev.c ++++ b/net/bridge/br_switchdev.c +@@ -109,6 +109,7 @@ br_switchdev_fdb_notify(const struct net + .addr = fdb->key.addr.addr, + .vid = fdb->key.vlan_id, + .added_by_user = test_bit(BR_FDB_ADDED_BY_USER, &fdb->flags), ++ .local = test_bit(BR_FDB_LOCAL, &fdb->flags), + .offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags), + }; + diff --git a/target/linux/generic/pending-5.15/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch b/target/linux/generic/pending-5.15/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch new file mode 100644 index 0000000000..630e03bbfd --- /dev/null +++ b/target/linux/generic/pending-5.15/764-net-bridge-switchdev-Send-FDB-notifications-for-host.patch @@ -0,0 +1,96 @@ +From 2e50fd9322047253c327550b4485cf8761035a8c Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:11 +0100 +Subject: [PATCH] net: bridge: switchdev: Send FDB notifications for host + addresses + +Treat addresses added to the bridge itself in the same way as regular +ports and send out a notification so that drivers may sync it down to +the hardware FDB. + +Signed-off-by: Tobias Waldekranz +--- + net/bridge/br_fdb.c | 4 ++-- + net/bridge/br_private.h | 7 ++++--- + net/bridge/br_switchdev.c | 11 +++++------ + 3 files changed, 11 insertions(+), 11 deletions(-) + +--- a/net/bridge/br_fdb.c ++++ b/net/bridge/br_fdb.c +@@ -602,7 +602,7 @@ void br_fdb_update(struct net_bridge *br + /* fastpath: update of existing entry */ + if (unlikely(source != fdb->dst && + !test_bit(BR_FDB_STICKY, &fdb->flags))) { +- br_switchdev_fdb_notify(fdb, RTM_DELNEIGH); ++ br_switchdev_fdb_notify(br, fdb, RTM_DELNEIGH); + fdb->dst = source; + fdb_modified = true; + /* Take over HW learned entry */ +@@ -735,7 +735,7 @@ static void fdb_notify(struct net_bridge + int err = -ENOBUFS; + + if (swdev_notify) +- br_switchdev_fdb_notify(fdb, type); ++ br_switchdev_fdb_notify(br, fdb, type); + + skb = nlmsg_new(fdb_nlmsg_size(), GFP_ATOMIC); + if (skb == NULL) +--- a/net/bridge/br_private.h ++++ b/net/bridge/br_private.h +@@ -1525,8 +1525,8 @@ bool nbp_switchdev_allowed_egress(const + int br_switchdev_set_port_flag(struct net_bridge_port *p, + unsigned long flags, + unsigned long mask); +-void br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, +- int type); ++void br_switchdev_fdb_notify(struct net_bridge *br, ++ const struct net_bridge_fdb_entry *fdb, int type); + int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags, + struct netlink_ext_ack *extack); + int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid); +@@ -1572,7 +1572,8 @@ static inline int br_switchdev_port_vlan + } + + static inline void +-br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type) ++br_switchdev_fdb_notify(struct net_bridge *br, ++ const struct net_bridge_fdb_entry *fdb, int type) + { + } + +--- a/net/bridge/br_switchdev.c ++++ b/net/bridge/br_switchdev.c +@@ -103,7 +103,8 @@ int br_switchdev_set_port_flag(struct ne + } + + void +-br_switchdev_fdb_notify(const struct net_bridge_fdb_entry *fdb, int type) ++br_switchdev_fdb_notify(struct net_bridge *br, ++ const struct net_bridge_fdb_entry *fdb, int type) + { + struct switchdev_notifier_fdb_info info = { + .addr = fdb->key.addr.addr, +@@ -112,20 +113,19 @@ br_switchdev_fdb_notify(const struct net + .local = test_bit(BR_FDB_LOCAL, &fdb->flags), + .offloaded = test_bit(BR_FDB_OFFLOADED, &fdb->flags), + }; ++ struct net_device *dev = fdb->dst ? fdb->dst->dev : br->dev; + +- if (!fdb->dst) +- return; + if (test_bit(BR_FDB_LOCAL, &fdb->flags)) + return; + + switch (type) { + case RTM_DELNEIGH: + call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_DEVICE, +- fdb->dst->dev, &info.info, NULL); ++ dev, &info.info, NULL); + break; + case RTM_NEWNEIGH: + call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_DEVICE, +- fdb->dst->dev, &info.info, NULL); ++ dev, &info.info, NULL); + break; + } + } diff --git a/target/linux/generic/pending-5.15/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch b/target/linux/generic/pending-5.15/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch new file mode 100644 index 0000000000..c0b4fd1d14 --- /dev/null +++ b/target/linux/generic/pending-5.15/765-net-dsa-Include-local-addresses-in-assisted-CPU-port.patch @@ -0,0 +1,36 @@ +From dd082716b43a3684b2f473ae5d1e76d1c076d86d Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:12 +0100 +Subject: [PATCH] net: dsa: Include local addresses in assisted CPU port + learning + +Add local addresses (i.e. the ports' MAC addresses) to the hardware +FDB when assisted CPU port learning is enabled. + +NOTE: The bridge's own MAC address is also "local". If that address is +not shared with any port, the bridge's MAC is not be added by this +functionality - but the following commit takes care of that case. + +Signed-off-by: Tobias Waldekranz +--- + net/dsa/slave.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2192,10 +2192,12 @@ static int dsa_slave_switchdev_event(str + fdb_info = ptr; + + if (dsa_slave_dev_check(dev)) { +- if (!fdb_info->added_by_user) +- return NOTIFY_OK; +- + dp = dsa_slave_to_port(dev); ++ ++ if (fdb_info->local && dp->ds->assisted_learning_on_cpu_port) ++ dp = dp->cpu_dp; ++ else if (!fdb_info->added_by_user) ++ return NOTIFY_OK; + } else { + /* Snoop addresses learnt on foreign interfaces + * bridged with us, for switches that don't diff --git a/target/linux/generic/pending-5.15/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch b/target/linux/generic/pending-5.15/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch new file mode 100644 index 0000000000..0b644d8300 --- /dev/null +++ b/target/linux/generic/pending-5.15/766-net-dsa-Include-bridge-addresses-in-assisted-CPU-por.patch @@ -0,0 +1,30 @@ +From 0663ebde114a6fb2c28c622ba5212b302d4d2581 Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:13 +0100 +Subject: [PATCH] net: dsa: Include bridge addresses in assisted CPU port + learning + +Now that notifications are sent out for addresses added to the bridge +itself, extend DSA to include those addresses in the hardware FDB when +assisted CPU port learning is enabled. + +Signed-off-by: Tobias Waldekranz +--- + net/dsa/slave.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2206,7 +2206,11 @@ static int dsa_slave_switchdev_event(str + struct net_device *br_dev; + struct dsa_slave_priv *p; + +- br_dev = netdev_master_upper_dev_get_rcu(dev); ++ if (netif_is_bridge_master(dev)) ++ br_dev = dev; ++ else ++ br_dev = netdev_master_upper_dev_get_rcu(dev); ++ + if (!br_dev) + return NOTIFY_DONE; + diff --git a/target/linux/generic/pending-5.15/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch b/target/linux/generic/pending-5.15/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch new file mode 100644 index 0000000000..f71ea16b97 --- /dev/null +++ b/target/linux/generic/pending-5.15/767-net-dsa-Sync-static-FDB-entries-on-foreign-interface.patch @@ -0,0 +1,56 @@ +From 81e39fd78db82fb51b05fff309b9c521f1a0bc5a Mon Sep 17 00:00:00 2001 +From: Tobias Waldekranz +Date: Sat, 16 Jan 2021 02:25:14 +0100 +Subject: [PATCH] net: dsa: Sync static FDB entries on foreign interfaces to + hardware + +Reuse the "assisted_learning_on_cpu_port" functionality to always add +entries for user-configured entries on foreign interfaces, even if +assisted_learning_on_cpu_port is not enabled. E.g. in this situation: + + br0 + / \ +swp0 dummy0 + +$ bridge fdb add 02:00:de:ad:00:01 dev dummy0 vlan 1 master + +Results in DSA adding an entry in the hardware FDB, pointing this +address towards the CPU port. + +The same is true for entries added to the bridge itself, e.g: + +$ bridge fdb add 02:00:de:ad:00:01 dev br0 vlan 1 self + +Signed-off-by: Tobias Waldekranz +--- + net/dsa/slave.c | 12 ++++++++---- + 1 file changed, 8 insertions(+), 4 deletions(-) + +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2199,9 +2199,12 @@ static int dsa_slave_switchdev_event(str + else if (!fdb_info->added_by_user) + return NOTIFY_OK; + } else { +- /* Snoop addresses learnt on foreign interfaces +- * bridged with us, for switches that don't +- * automatically learn SA from CPU-injected traffic ++ /* Snoop addresses added to foreign interfaces ++ * bridged with us, or the bridge ++ * itself. Dynamically learned addresses can ++ * also be added for switches that don't ++ * automatically learn SA from CPU-injected ++ * traffic. + */ + struct net_device *br_dev; + struct dsa_slave_priv *p; +@@ -2223,7 +2226,8 @@ static int dsa_slave_switchdev_event(str + + dp = p->dp->cpu_dp; + +- if (!dp->ds->assisted_learning_on_cpu_port) ++ if (!fdb_info->added_by_user && ++ !dp->ds->assisted_learning_on_cpu_port) + return NOTIFY_DONE; + } + diff --git a/target/linux/generic/pending-5.15/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-5.15/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch new file mode 100644 index 0000000000..9247401140 --- /dev/null +++ b/target/linux/generic/pending-5.15/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch @@ -0,0 +1,27 @@ +From: Tobias Waldekranz +Subject: [RFC net-next 7/7] net: dsa: mv88e6xxx: Request assisted learning on CPU port +Date: Sat, 16 Jan 2021 02:25:15 +0100 +Archived-At: + +While the hardware is capable of performing learning on the CPU port, +it requires alot of additions to the bridge's forwarding path in order +to handle multi-destination traffic correctly. + +Until that is in place, opt for the next best thing and let DSA sync +the relevant addresses down to the hardware FDB. + +Signed-off-by: Tobias Waldekranz +--- + drivers/net/dsa/mv88e6xxx/chip.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -5436,6 +5436,7 @@ static int mv88e6xxx_register_switch(str + ds->ops = &mv88e6xxx_switch_ops; + ds->ageing_time_min = chip->info->age_time_coeff; + ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX; ++ ds->assisted_learning_on_cpu_port = true; + + dev_set_drvdata(dev, ds); + diff --git a/target/linux/generic/pending-5.15/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch b/target/linux/generic/pending-5.15/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch new file mode 100644 index 0000000000..fcf7892c04 --- /dev/null +++ b/target/linux/generic/pending-5.15/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch @@ -0,0 +1,61 @@ +From patchwork Thu Aug 5 22:23:30 2021 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12422209 +Date: Thu, 5 Aug 2021 23:23:30 +0100 +From: Daniel Golle +To: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Cc: "David S. Miller" , Andrew Lunn , + Michael Walle +Subject: [PATCH] ARM: kirkwood: add missing for ETH_ALEN +Message-ID: +MIME-Version: 1.0 +Content-Disposition: inline +X-BeenThere: linux-arm-kernel@lists.infradead.org +X-Mailman-Version: 2.1.34 +Precedence: list +List-Id: +List-Archive: +Sender: "linux-arm-kernel" + +After commit 83216e3988cd1 ("of: net: pass the dst buffer to +of_get_mac_address()") build fails for kirkwood as ETH_ALEN is not +defined. + +arch/arm/mach-mvebu/kirkwood.c: In function 'kirkwood_dt_eth_fixup': +arch/arm/mach-mvebu/kirkwood.c:87:13: error: 'ETH_ALEN' undeclared (first use in this function); did you mean 'ESTALE'? + u8 tmpmac[ETH_ALEN]; + ^~~~~~~~ + ESTALE +arch/arm/mach-mvebu/kirkwood.c:87:13: note: each undeclared identifier is reported only once for each function it appears in +arch/arm/mach-mvebu/kirkwood.c:87:6: warning: unused variable 'tmpmac' [-Wunused-variable] + u8 tmpmac[ETH_ALEN]; + ^~~~~~ +make[5]: *** [scripts/Makefile.build:262: arch/arm/mach-mvebu/kirkwood.o] Error 1 +make[5]: *** Waiting for unfinished jobs.... + +Add missing #include to fix this. + +Cc: David S. Miller +Cc: Andrew Lunn +Cc: Michael Walle +Reported-by: https://buildbot.openwrt.org/master/images/#/builders/56/builds/220/steps/44/logs/stdio +Fixes: 83216e3988cd1 ("of: net: pass the dst buffer to of_get_mac_address()") +Signed-off-by: Daniel Golle +--- + arch/arm/mach-mvebu/kirkwood.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-mvebu/kirkwood.c ++++ b/arch/arm/mach-mvebu/kirkwood.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + #include diff --git a/target/linux/generic/pending-5.15/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-5.15/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch new file mode 100644 index 0000000000..511a9f7555 --- /dev/null +++ b/target/linux/generic/pending-5.15/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch @@ -0,0 +1,64 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the + subdevices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +For bus devices to be fully usable it's required to set their DMA +parameters. + +For years it has been missing and remained unnoticed because of +mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask. +Kernel 4.19 came with a lot of DMA changes and caused a regression on +the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic +dma noncoherent ops for simple noncoherent platforms") DMA coherent +allocations just fail. Example: +[ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed +[ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA +[ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 +[ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded + +This change fixes above regression in addition to the MIPS bcm47xx +commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC"). + +It also fixes another *old* GPIO regression caused by a parent pointing +to the NULL: +[ 0.157054] missing gpiochip .dev parent pointer +[ 0.157287] bcma: bus0: Error registering GPIO driver: -22 +introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to +use GPIOLIB_IRQCHIP"). + +Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") +Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP") +Cc: linux-mips@linux-mips.org +Cc: Christoph Hellwig +Cc: Linus Walleij +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/bcma/host_soc.c ++++ b/drivers/bcma/host_soc.c +@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm + struct bcma_bus *bus = &soc->bus; + int err; + ++ bus->dev = soc->dev; ++ + /* Scan bus and initialize it */ + err = bcma_bus_early_register(bus); + if (err) +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -241,8 +241,10 @@ void bcma_prepare_core(struct bcma_bus * + core->dev.bus = &bcma_bus_type; + dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index); + core->dev.parent = bus->dev; +- if (bus->dev) ++ if (bus->dev) { + bcma_of_fill_device(bus->dev, core); ++ dma_coerce_mask_and_coherent(&core->dev, bus->dev->coherent_dma_mask); ++ } + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: diff --git a/target/linux/generic/pending-5.15/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch b/target/linux/generic/pending-5.15/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch new file mode 100644 index 0000000000..af44ff24ac --- /dev/null +++ b/target/linux/generic/pending-5.15/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch @@ -0,0 +1,222 @@ +From fc23ea48ba52c24f201fe5ca0132ee1a3de5a70a Mon Sep 17 00:00:00 2001 +From: Mauri Sandberg +Date: Thu, 25 Mar 2021 11:48:05 +0200 +Subject: [PATCH 2/2] gpio: gpio-cascade: add generic GPIO cascade + +Adds support for building cascades of GPIO lines. That is, it allows +setups when there is one upstream line and multiple cascaded lines, out +of which one can be chosen at a time. The status of the upstream line +can be conveyed to the selected cascaded line or, vice versa, the status +of the cascaded line can be conveyed to the upstream line. + +A multiplexer is being used to select, which cascaded GPIO line is being +used at any given time. + +At the moment only input direction is supported. In future it should be +possible to add support for output direction, too. + +Signed-off-by: Mauri Sandberg +Reviewed-by: Linus Walleij +Reviewed-by: Andy Shevchenko +--- +v7 -> v8: + - rearrange members in struct gpio_cascade + - cosmetic changes in file header and in one function declaration + - added Reviewed-by tags by Linus and Andy +v6 -> v7: + - In Kconfig add info about module name + - adhere to new convention that allows lines longer than 80 chars + - use dev_probe_err with upstream gpio line too + - refactor for cleaner exit of probe function. +v5 -> v6: + - In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER + - refactor code preferring one-liners + - clean up prints, removing them from success-path. + - don't explicitly set gpio_chip.of_node as it's done in the GPIO library + - use devm_gpiochip_add_data instead of gpiochip_add +v4 -> v5: + - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly + here and there and changed to use new bindings and compatible string + - ambigious and vague 'pin' was rename to 'upstream_line' + - dropped Tested-by and Reviewed-by due to changes in bindings + - dropped Reported-by suggested by an automatic bot as it was not really + appropriate to begin with + - functionally it's the same as v4 +v3 -> v4: + - Changed author email + - Included Tested-by and Reviewed-by from Drew +v2 -> v3: + - use managed device resources + - update Kconfig description +v1 -> v2: + - removed .owner from platform_driver as per test bot's instruction + - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE + - added gpio_mux_input_get_direction as it's recommended for all chips + - removed because this is input only chip: gpio_mux_input_set_value + - removed because they are not needed for input/output only chips: + gpio_mux_input_direction_input + gpio_mux_input_direction_output + - fixed typo in an error message + - added info message about successful registration + - removed can_sleep flag as this does not sleep while getting GPIO value + like I2C or SPI do + - Updated description in Kconfig +--- + drivers/gpio/Kconfig | 15 +++++ + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++++++++++++++++++++ + 3 files changed, 133 insertions(+) + create mode 100644 drivers/gpio/gpio-cascade.c + +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1617,4 +1617,19 @@ config GPIO_MOCKUP + tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in + it. + ++comment "Other GPIO expanders" ++ ++config GPIO_CASCADE ++ tristate "General GPIO cascade" ++ select MULTIPLEXER ++ help ++ Say yes here to enable support for generic GPIO cascade. ++ ++ This allows building one-to-many cascades of GPIO lines using ++ different types of multiplexers readily available. At the ++ moment only input lines are supported. ++ ++ To build the driver as a module choose 'm' and the resulting module ++ will be called 'gpio-cascade'. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o + obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o + obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o ++obj-$(CONFIG_GPIO_CASCADE) += gpio-cascade.o + obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o + obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o + obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o +--- /dev/null ++++ b/drivers/gpio/gpio-cascade.c +@@ -0,0 +1,117 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * A generic GPIO cascade driver ++ * ++ * Copyright (C) 2021 Mauri Sandberg ++ * ++ * This allows building cascades of GPIO lines in a manner illustrated ++ * below: ++ * ++ * /|---- Cascaded GPIO line 0 ++ * Upstream | |---- Cascaded GPIO line 1 ++ * GPIO line ----+ | . ++ * | | . ++ * \|---- Cascaded GPIO line n ++ * ++ * A multiplexer is being used to select, which cascaded line is being ++ * addressed at any given time. ++ * ++ * At the moment only input mode is supported due to lack of means for ++ * testing output functionality. At least theoretically output should be ++ * possible with open drain constructions. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++struct gpio_cascade { ++ struct gpio_chip gpio_chip; ++ struct device *parent; ++ struct mux_control *mux_control; ++ struct gpio_desc *upstream_line; ++}; ++ ++static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc) ++{ ++ return container_of(gc, struct gpio_cascade, gpio_chip); ++} ++ ++static int gpio_cascade_get_direction(struct gpio_chip *gc, unsigned int offset) ++{ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct gpio_cascade *cas = chip_to_cascade(gc); ++ int ret; ++ ++ ret = mux_control_select(cas->mux_control, offset); ++ if (ret) ++ return ret; ++ ++ ret = gpiod_get_value(cas->upstream_line); ++ mux_control_deselect(cas->mux_control); ++ return ret; ++} ++ ++static int gpio_cascade_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct gpio_cascade *cas; ++ struct mux_control *mc; ++ struct gpio_desc *upstream; ++ struct gpio_chip *gc; ++ ++ cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL); ++ if (!cas) ++ return -ENOMEM; ++ ++ mc = devm_mux_control_get(dev, NULL); ++ if (IS_ERR(mc)) ++ return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n"); ++ ++ cas->mux_control = mc; ++ upstream = devm_gpiod_get(dev, "upstream", GPIOD_IN); ++ if (IS_ERR(upstream)) ++ return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n"); ++ ++ cas->upstream_line = upstream; ++ cas->parent = dev; ++ ++ gc = &cas->gpio_chip; ++ gc->get = gpio_cascade_get_value; ++ gc->get_direction = gpio_cascade_get_direction; ++ gc->base = -1; ++ gc->ngpio = mux_control_states(mc); ++ gc->label = dev_name(cas->parent); ++ gc->parent = cas->parent; ++ gc->owner = THIS_MODULE; ++ ++ platform_set_drvdata(pdev, cas); ++ return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL); ++} ++ ++static const struct of_device_id gpio_cascade_id[] = { ++ { .compatible = "gpio-cascade" }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, gpio_cascade_id); ++ ++static struct platform_driver gpio_cascade_driver = { ++ .driver = { ++ .name = "gpio-cascade", ++ .of_match_table = gpio_cascade_id, ++ }, ++ .probe = gpio_cascade_probe, ++}; ++module_platform_driver(gpio_cascade_driver); ++ ++MODULE_AUTHOR("Mauri Sandberg "); ++MODULE_DESCRIPTION("Generic GPIO cascade"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch new file mode 100644 index 0000000000..62f6fed126 --- /dev/null +++ b/target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch @@ -0,0 +1,62 @@ +From: Gabor Juhos +Subject: debloat: add kernel config option to disabling common PCI quirks + +Signed-off-by: Gabor Juhos +--- + drivers/pci/Kconfig | 6 ++++++ + drivers/pci/quirks.c | 6 ++++++ + 2 files changed, 12 insertions(+) + +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -118,6 +118,13 @@ config XEN_PCIDEV_FRONTEND + The PCI device frontend driver allows the kernel to import arbitrary + PCI devices from a PCI backend to support PCI driver domains. + ++config PCI_DISABLE_COMMON_QUIRKS ++ bool "PCI disable common quirks" ++ depends on PCI ++ help ++ If you don't know what to do here, say N. ++ ++ + config PCI_ATS + bool + +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c +@@ -206,6 +206,7 @@ static void quirk_mmio_always_on(struct + DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS + /* + * The Mellanox Tavor device gives false positive parity errors. Mark this + * device with a broken_parity_status to allow PCI scanning code to "skip" +@@ -3323,6 +3324,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); + ++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ ++ + /* + * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. + * To work around this, query the size it should be configured to by the +@@ -3348,6 +3351,8 @@ static void quirk_intel_ntb(struct pci_d + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS ++ + /* + * Some BIOS implementations leave the Intel GPU interrupts enabled, even + * though no one is handling them (e.g., if the i915 driver is never +@@ -3386,6 +3391,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN + DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); + DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); + ++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ ++ + /* + * PCI devices which are on Intel chips can skip the 10ms delay + * before entering D3 mode. diff --git a/target/linux/generic/pending-5.15/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-5.15/811-pci_disable_usb_common_quirks.patch new file mode 100644 index 0000000000..42a8397839 --- /dev/null +++ b/target/linux/generic/pending-5.15/811-pci_disable_usb_common_quirks.patch @@ -0,0 +1,115 @@ +From: Felix Fietkau +Subject: debloat: disable common USB quirks + +Signed-off-by: Felix Fietkau +--- + drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++ + drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++- + include/linux/usb/hcd.h | 7 +++++++ + 3 files changed, 40 insertions(+), 1 deletion(-) + +--- a/drivers/usb/host/pci-quirks.c ++++ b/drivers/usb/host/pci-quirks.c +@@ -128,6 +128,8 @@ struct amd_chipset_type { + u8 rev; + }; + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS ++ + static struct amd_chipset_info { + struct pci_dev *nb_dev; + struct pci_dev *smbus_dev; +@@ -633,6 +635,10 @@ bool usb_amd_pt_check_port(struct device + } + EXPORT_SYMBOL_GPL(usb_amd_pt_check_port); + ++#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */ ++ ++#if IS_ENABLED(CONFIG_USB_UHCI_HCD) ++ + /* + * Make sure the controller is completely inactive, unable to + * generate interrupts or do DMA. +@@ -712,8 +718,17 @@ reset_needed: + uhci_reset_hc(pdev, base); + return 1; + } ++#else ++int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) ++{ ++ return 0; ++} ++ ++#endif + EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS ++ + static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) + { + u16 cmd; +@@ -1285,3 +1300,4 @@ static void quirk_usb_early_handoff(stru + } + DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); ++#endif +--- a/drivers/usb/host/pci-quirks.h ++++ b/drivers/usb/host/pci-quirks.h +@@ -5,6 +5,9 @@ + #ifdef CONFIG_USB_PCI + void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); + int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); ++#endif /* CONFIG_USB_PCI */ ++ ++#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS) + int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); + bool usb_amd_hang_symptom_quirk(void); + bool usb_amd_prefetch_quirk(void); +@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev, + bool usb_amd_pt_check_port(struct device *device, int port); + #else + struct pci_dev; ++static inline int usb_amd_quirk_pll_check(void) ++{ ++ return 0; ++} ++static inline bool usb_amd_hang_symptom_quirk(void) ++{ ++ return false; ++} ++static inline bool usb_amd_prefetch_quirk(void) ++{ ++ return false; ++} + static inline void usb_amd_quirk_pll_disable(void) {} + static inline void usb_amd_quirk_pll_enable(void) {} + static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} +@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port + { + return false; + } ++static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {} ++static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev) ++{ ++ return false; ++} + #endif /* CONFIG_USB_PCI */ + + #endif /* __LINUX_USB_PCI_QUIRKS_H */ +--- a/include/linux/usb/hcd.h ++++ b/include/linux/usb/hcd.h +@@ -484,7 +484,14 @@ extern int usb_hcd_pci_probe(struct pci_ + extern void usb_hcd_pci_remove(struct pci_dev *dev); + extern void usb_hcd_pci_shutdown(struct pci_dev *dev); + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS + extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); ++#else ++static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev) ++{ ++ return 0; ++} ++#endif + + #ifdef CONFIG_PM + extern const struct dev_pm_ops usb_hcd_pci_pm_ops; diff --git a/target/linux/generic/pending-5.15/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-5.15/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch new file mode 100644 index 0000000000..33eb34c913 --- /dev/null +++ b/target/linux/generic/pending-5.15/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch @@ -0,0 +1,26 @@ +From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Sun, 18 Feb 2018 17:08:04 +0100 +Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio + +In devices, where fdt is used, is impossible to apply platform data +without proper fdt node. + +This patch allow to use platform data in devices with fdt. + +Signed-off-by: Pawel Dembicki +--- + drivers/w1/masters/w1-gpio.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +--- a/drivers/w1/masters/w1-gpio.c ++++ b/drivers/w1/masters/w1-gpio.c +@@ -76,7 +76,7 @@ static int w1_gpio_probe(struct platform + enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + int err; + +- if (of_have_populated_dt()) { ++ if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; diff --git a/target/linux/generic/pending-5.15/834-ledtrig-libata.patch b/target/linux/generic/pending-5.15/834-ledtrig-libata.patch new file mode 100644 index 0000000000..25cffb1444 --- /dev/null +++ b/target/linux/generic/pending-5.15/834-ledtrig-libata.patch @@ -0,0 +1,149 @@ +From: Daniel Golle +Subject: libata: add ledtrig support + +This adds a LED trigger for each ATA port indicating disk activity. + +As this is needed only on specific platforms (NAS SoCs and such), +these platforms should define ARCH_WANTS_LIBATA_LEDS if there +are boards with LED(s) intended to indicate ATA disk activity and +need the OS to take care of that. +In that way, if not selected, LED trigger support not will be +included in libata-core and both, codepaths and structures remain +untouched. + +Signed-off-by: Daniel Golle +--- + drivers/ata/Kconfig | 16 ++++++++++++++++ + drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++ + include/linux/libata.h | 9 +++++++++ + 3 files changed, 66 insertions(+) + +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -67,6 +67,22 @@ config ATA_FORCE + + If unsure, say Y. + ++config ARCH_WANT_LIBATA_LEDS ++ bool ++ ++config ATA_LEDS ++ bool "support ATA port LED triggers" ++ depends on ARCH_WANT_LIBATA_LEDS ++ select NEW_LEDS ++ select LEDS_CLASS ++ select LEDS_TRIGGERS ++ default y ++ help ++ This option adds a LED trigger for each registered ATA port. ++ It is used to drive disk activity leds connected via GPIO. ++ ++ If unsure, say N. ++ + config ATA_ACPI + bool "ATA ACPI Support" + depends on ACPI +--- a/drivers/ata/libata-core.c ++++ b/drivers/ata/libata-core.c +@@ -650,6 +650,19 @@ u64 ata_tf_read_block(const struct ata_t + return block; + } + ++#ifdef CONFIG_ATA_LEDS ++#define LIBATA_BLINK_DELAY 20 /* ms */ ++static inline void ata_led_act(struct ata_port *ap) ++{ ++ unsigned long led_delay = LIBATA_BLINK_DELAY; ++ ++ if (unlikely(!ap->ledtrig)) ++ return; ++ ++ led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0); ++} ++#endif ++ + /** + * ata_build_rw_tf - Build ATA taskfile for given read/write request + * @tf: Target ATA taskfile +@@ -4548,6 +4561,9 @@ struct ata_queued_cmd *ata_qc_new_init(s + if (tag < 0) + return NULL; + } ++#ifdef CONFIG_ATA_LEDS ++ ata_led_act(ap); ++#endif + + qc = __ata_qc_from_tag(ap, tag); + qc->tag = qc->hw_tag = tag; +@@ -5326,6 +5342,9 @@ struct ata_port *ata_port_alloc(struct a + ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; + #endif ++#ifdef CONFIG_ATA_LEDS ++ ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL); ++#endif + ata_sff_port_init(ap); + + return ap; +@@ -5361,6 +5380,12 @@ static void ata_host_release(struct kref + + kfree(ap->pmp_link); + kfree(ap->slave_link); ++#ifdef CONFIG_ATA_LEDS ++ if (ap->ledtrig) { ++ led_trigger_unregister(ap->ledtrig); ++ kfree(ap->ledtrig); ++ }; ++#endif + kfree(ap); + host->ports[i] = NULL; + } +@@ -5767,7 +5792,23 @@ int ata_host_register(struct ata_host *h + host->ports[i]->print_id = atomic_inc_return(&ata_print_id); + host->ports[i]->local_port_no = i + 1; + } ++#ifdef CONFIG_ATA_LEDS ++ for (i = 0; i < host->n_ports; i++) { ++ if (unlikely(!host->ports[i]->ledtrig)) ++ continue; + ++ snprintf(host->ports[i]->ledtrig_name, ++ sizeof(host->ports[i]->ledtrig_name), "ata%u", ++ host->ports[i]->print_id); ++ ++ host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name; ++ ++ if (led_trigger_register(host->ports[i]->ledtrig)) { ++ kfree(host->ports[i]->ledtrig); ++ host->ports[i]->ledtrig = NULL; ++ } ++ } ++#endif + /* Create associated sysfs transport objects */ + for (i = 0; i < host->n_ports; i++) { + rc = ata_tport_add(host->dev,host->ports[i]); +--- a/include/linux/libata.h ++++ b/include/linux/libata.h +@@ -23,6 +23,9 @@ + #include + #include + #include ++#ifdef CONFIG_ATA_LEDS ++#include ++#endif + + /* + * Define if arch has non-standard setup. This is a _PCI_ standard +@@ -883,6 +886,12 @@ struct ata_port { + #ifdef CONFIG_ATA_ACPI + struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ + #endif ++ ++#ifdef CONFIG_ATA_LEDS ++ struct led_trigger *ledtrig; ++ char ledtrig_name[8]; ++#endif ++ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; + }; diff --git a/target/linux/generic/pending-5.15/840-hwrng-bcm2835-set-quality-to-1000.patch b/target/linux/generic/pending-5.15/840-hwrng-bcm2835-set-quality-to-1000.patch new file mode 100644 index 0000000000..580f0b1bfa --- /dev/null +++ b/target/linux/generic/pending-5.15/840-hwrng-bcm2835-set-quality-to-1000.patch @@ -0,0 +1,26 @@ +From d6988cf1d16faac56899918bb2b1be8d85155e3f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= +Date: Sat, 20 Feb 2021 18:36:38 +0100 +Subject: [PATCH] hwrng: bcm2835: set quality to 1000 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows devices without a high precission timer to reduce boot from >100s +to <30s. + +Signed-off-by: Álvaro Fernández Rojas +--- + drivers/char/hw_random/bcm2835-rng.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/char/hw_random/bcm2835-rng.c ++++ b/drivers/char/hw_random/bcm2835-rng.c +@@ -163,6 +163,7 @@ static int bcm2835_rng_probe(struct plat + priv->rng.init = bcm2835_rng_init; + priv->rng.read = bcm2835_rng_read; + priv->rng.cleanup = bcm2835_rng_cleanup; ++ priv->rng.quality = 1000; + + if (dev_of_node(dev)) { + rng_id = of_match_node(bcm2835_rng_of_match, dev->of_node); diff --git a/target/linux/generic/pending-5.15/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch b/target/linux/generic/pending-5.15/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch new file mode 100644 index 0000000000..f2f0e61089 --- /dev/null +++ b/target/linux/generic/pending-5.15/842-net-qmi_wwan-add-ZTE-MF286D-modem-19d2-1485.patch @@ -0,0 +1,59 @@ +From 078c6a1cbd4cd7496048786beec2e312577bebbf Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Tue, 11 Jan 2022 23:11:32 +0100 +Subject: [PATCH] net: qmi_wwan: add ZTE MF286D modem 19d2:1485 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. + +T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 +D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=19d2 ProdID=1485 Rev=52.87 +S: Manufacturer=ZTE,Incorporated +S: Product=ZTE Technologies MSM +S: SerialNumber=MF286DZTED000000 +C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA +A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 +I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host +E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option +E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option +E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan +E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs +E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +Signed-off-by: Pawel Dembicki +Acked-by: Bjørn Mork +Signed-off-by: David S. Miller +--- + drivers/net/usb/qmi_wwan.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/usb/qmi_wwan.c ++++ b/drivers/net/usb/qmi_wwan.c +@@ -1252,6 +1252,7 @@ static const struct usb_device_id produc + {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */ + {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */ + {QMI_FIXED_INTF(0x19d2, 0x1432, 3)}, /* ZTE ME3620 */ ++ {QMI_FIXED_INTF(0x19d2, 0x1485, 5)}, /* ZTE MF286D */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x2001, 0x7e16, 3)}, /* D-Link DWM-221 */ + {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ diff --git a/target/linux/generic/pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch b/target/linux/generic/pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch new file mode 100644 index 0000000000..fecd19166c --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch @@ -0,0 +1,40 @@ +From 43f3f187e6f62ca40802afe39495c8a3e20b4bfa Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Mon, 10 Jan 2022 01:50:50 +0100 +Subject: [PATCH] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with + PCI_INTERRUPT_* +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Header file linux/pci.h defines enum pci_interrupt_pin with corresponding +PCI_INTERRUPT_* values. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 6 +----- + 1 file changed, 1 insertion(+), 5 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -37,10 +37,6 @@ + #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6) + #define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK BIT(7) + #define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV BIT(8) +-#define PCIE_CORE_INT_A_ASSERT_ENABLE 1 +-#define PCIE_CORE_INT_B_ASSERT_ENABLE 2 +-#define PCIE_CORE_INT_C_ASSERT_ENABLE 3 +-#define PCIE_CORE_INT_D_ASSERT_ENABLE 4 + /* PIO registers base address and register offsets */ + #define PIO_BASE_ADDR 0x4000 + #define PIO_CTRL (PIO_BASE_ADDR + 0x0) +@@ -966,7 +962,7 @@ static int advk_sw_pci_bridge_init(struc + bridge->conf.pref_mem_limit = cpu_to_le16(PCI_PREF_RANGE_TYPE_64); + + /* Support interrupt A for MSI feature */ +- bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE; ++ bridge->conf.intpin = PCI_INTERRUPT_INTA; + + /* Aardvark HW provides PCIe Capability structure in version 2 */ + bridge->pcie_conf.cap = cpu_to_le16(2); diff --git a/target/linux/generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch b/target/linux/generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch new file mode 100644 index 0000000000..72a432fc06 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch @@ -0,0 +1,57 @@ +From a29a7d01cd778854e08108461cba321a63d98871 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 2 Jul 2021 16:39:47 +0200 +Subject: [PATCH] PCI: aardvark: Fix reading MSI interrupt number +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +In advk_pcie_handle_msi() the authors expect that when bit i in the W1C +register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is +updated to contain the MSI number corresponding to index i. + +Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG +always contains the number of the last received MSI, overall. + +Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt +number. Since Aardvark already forbids more than 32 interrupts and uses +own allocated hwirq numbers, the msi_idx already corresponds to the +received MSI number. + +Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1393,7 +1393,7 @@ static void advk_pcie_remove_irq_domain( + static void advk_pcie_handle_msi(struct advk_pcie *pcie) + { + u32 msi_val, msi_mask, msi_status, msi_idx; +- u16 msi_data; ++ int virq; + + msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG); + msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG); +@@ -1403,13 +1403,12 @@ static void advk_pcie_handle_msi(struct + if (!(BIT(msi_idx) & msi_status)) + continue; + +- /* +- * msi_idx contains bits [4:0] of the msi_data and msi_data +- * contains 16bit MSI interrupt number +- */ + advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG); +- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK; +- generic_handle_irq(msi_data); ++ virq = irq_find_mapping(pcie->msi_inner_domain, msi_idx); ++ if (virq) ++ generic_handle_irq(virq); ++ else ++ dev_err_ratelimited(&pcie->pdev->dev, "unexpected MSI 0x%02x\n", msi_idx); + } + + advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING, diff --git a/target/linux/generic/pending-5.15/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch b/target/linux/generic/pending-5.15/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch new file mode 100644 index 0000000000..8b2d07089a --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch @@ -0,0 +1,72 @@ +From bb03b126ea6c9e57177b537dd022246fa5dbef16 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 12 Feb 2021 16:24:07 +0100 +Subject: [PATCH] PCI: aardvark: Fix support for MSI interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already +set for the MSI chip. But when allocating MSI interrupt numbers for +Multi-MSI, the numbers need to be properly aligned, otherwise endpoint +devices send MSI interrupt with incorrect numbers. + +Fix this issue by using function bitmap_find_free_region() instead of +bitmap_find_next_zero_area(). + +To ensure that aligned MSI interrupt numbers are used by endpoint devices, +we cannot use Linux virtual irq numbers (as they are random and not +properly aligned). Instead we need to use the aligned hwirq numbers. + +This change fixes receiving MSI interrupts on Armada 3720 boards and +allows using NVMe disks which use Multi-MSI feature with 3 interrupts. + +Without this NVMe disks freeze booting as linux nvme-core.c is waiting +60s for an interrupt. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 16 ++++++---------- + 1 file changed, 6 insertions(+), 10 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1189,7 +1189,7 @@ static void advk_msi_irq_compose_msi_msg + + msg->address_lo = lower_32_bits(msi_msg); + msg->address_hi = upper_32_bits(msi_msg); +- msg->data = data->irq; ++ msg->data = data->hwirq; + } + + static int advk_msi_set_affinity(struct irq_data *irq_data, +@@ -1206,15 +1206,11 @@ static int advk_msi_irq_domain_alloc(str + int hwirq, i; + + mutex_lock(&pcie->msi_used_lock); +- hwirq = bitmap_find_next_zero_area(pcie->msi_used, MSI_IRQ_NUM, +- 0, nr_irqs, 0); +- if (hwirq >= MSI_IRQ_NUM) { +- mutex_unlock(&pcie->msi_used_lock); +- return -ENOSPC; +- } +- +- bitmap_set(pcie->msi_used, hwirq, nr_irqs); ++ hwirq = bitmap_find_free_region(pcie->msi_used, MSI_IRQ_NUM, ++ order_base_2(nr_irqs)); + mutex_unlock(&pcie->msi_used_lock); ++ if (hwirq < 0) ++ return -ENOSPC; + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_info(domain, virq + i, hwirq + i, +@@ -1232,7 +1228,7 @@ static void advk_msi_irq_domain_free(str + struct advk_pcie *pcie = domain->host_data; + + mutex_lock(&pcie->msi_used_lock); +- bitmap_clear(pcie->msi_used, d->hwirq, nr_irqs); ++ bitmap_release_region(pcie->msi_used, d->hwirq, order_base_2(nr_irqs)); + mutex_unlock(&pcie->msi_used_lock); + } + diff --git a/target/linux/generic/pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch b/target/linux/generic/pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch new file mode 100644 index 0000000000..47a26ceeb8 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch @@ -0,0 +1,125 @@ +From 0cd5141d1866afb23286fe90cd846441fe7aeb39 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Sat, 27 Mar 2021 14:44:11 +0100 +Subject: [PATCH] PCI: aardvark: Rewrite IRQ code to chained IRQ handler +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Rewrite the code to use irq_set_chained_handler_and_data() handler with +chained_irq_enter() and chained_irq_exit() processing instead of using +devm_request_irq(). + +advk_pcie_irq_handler() reads IRQ status bits and calls other functions +based on which bits are set. These functions then read its own IRQ status +bits and calls other aardvark functions based on these bits. Finally +generic_handle_domain_irq() with translated linux IRQ numbers are called. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 48 +++++++++++++++------------ + 1 file changed, 26 insertions(+), 22 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -275,6 +275,7 @@ struct advk_pcie { + u32 actions; + } wins[OB_WIN_COUNT]; + u8 wins_count; ++ int irq; + struct irq_domain *irq_domain; + struct irq_chip irq_chip; + raw_spinlock_t irq_lock; +@@ -1442,21 +1443,26 @@ static void advk_pcie_handle_int(struct + } + } + +-static irqreturn_t advk_pcie_irq_handler(int irq, void *arg) ++static void advk_pcie_irq_handler(struct irq_desc *desc) + { +- struct advk_pcie *pcie = arg; +- u32 status; ++ struct advk_pcie *pcie = irq_desc_get_handler_data(desc); ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ u32 val, mask, status; + +- status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG); +- if (!(status & PCIE_IRQ_CORE_INT)) +- return IRQ_NONE; ++ chained_irq_enter(chip, desc); + +- advk_pcie_handle_int(pcie); ++ val = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG); ++ mask = advk_readl(pcie, HOST_CTRL_INT_MASK_REG); ++ status = val & ((~mask) & PCIE_IRQ_ALL_MASK); + +- /* Clear interrupt */ +- advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG); ++ if (status & PCIE_IRQ_CORE_INT) { ++ advk_pcie_handle_int(pcie); + +- return IRQ_HANDLED; ++ /* Clear interrupt */ ++ advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG); ++ } ++ ++ chained_irq_exit(chip, desc); + } + + static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie) +@@ -1523,7 +1529,7 @@ static int advk_pcie_probe(struct platfo + struct advk_pcie *pcie; + struct pci_host_bridge *bridge; + struct resource_entry *entry; +- int ret, irq; ++ int ret; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie)); + if (!bridge) +@@ -1611,17 +1617,9 @@ static int advk_pcie_probe(struct platfo + if (IS_ERR(pcie->base)) + return PTR_ERR(pcie->base); + +- irq = platform_get_irq(pdev, 0); +- if (irq < 0) +- return irq; +- +- ret = devm_request_irq(dev, irq, advk_pcie_irq_handler, +- IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie", +- pcie); +- if (ret) { +- dev_err(dev, "Failed to register interrupt\n"); +- return ret; +- } ++ pcie->irq = platform_get_irq(pdev, 0); ++ if (pcie->irq < 0) ++ return pcie->irq; + + pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node, + "reset-gpios", 0, +@@ -1670,11 +1668,14 @@ static int advk_pcie_probe(struct platfo + return ret; + } + ++ irq_set_chained_handler_and_data(pcie->irq, advk_pcie_irq_handler, pcie); ++ + bridge->sysdata = pcie; + bridge->ops = &advk_pcie_ops; + + ret = pci_host_probe(bridge); + if (ret < 0) { ++ irq_set_chained_handler_and_data(pcie->irq, NULL, NULL); + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + return ret; +@@ -1722,6 +1723,9 @@ static int advk_pcie_remove(struct platf + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG); + advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG); + ++ /* Remove IRQ handler */ ++ irq_set_chained_handler_and_data(pcie->irq, NULL, NULL); ++ + /* Remove IRQ domains */ + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); diff --git a/target/linux/generic/pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch b/target/linux/generic/pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch new file mode 100644 index 0000000000..9cc37f727e --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch @@ -0,0 +1,31 @@ +From 69c1f2c6f45a556361fd8e8d2d4eb20e2c8d3d95 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 18 Mar 2021 17:04:32 +0100 +Subject: [PATCH] PCI: aardvark: Check return value of + generic_handle_domain_irq() when processing INTx IRQ +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It is possible that we receive spurious INTx interrupt. Check for the +return value of generic_handle_domain_irq() when processing INTx IRQ. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1439,7 +1439,9 @@ static void advk_pcie_handle_int(struct + PCIE_ISR1_REG); + + virq = irq_find_mapping(pcie->irq_domain, i); +- generic_handle_irq(virq); ++ if (generic_handle_irq(virq) == -EINVAL) ++ dev_err_ratelimited(&pcie->pdev->dev, "unexpected INT%c IRQ\n", ++ (char)i + 'A'); + } + } + diff --git a/target/linux/generic/pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch b/target/linux/generic/pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch new file mode 100644 index 0000000000..154b11290a --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch @@ -0,0 +1,93 @@ +From 5eb36a6b9508da442aac80f4df23e3951bbfa7aa Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 10 Jan 2022 00:03:41 +0100 +Subject: [PATCH] PCI: aardvark: Make MSI irq_chip structures static driver + structures +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Marc Zyngier says [1] that we should use struct irq_chip as a global +static struct in the driver. Even though the structure currently +contains a dynamic member (parent_device), Marc says [2] that he plans +to kill it and make the structure completely static. + +Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to +static driver structure. + +[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/ +[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/ + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 26 ++++++++++++-------------- + 1 file changed, 12 insertions(+), 14 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -281,8 +281,6 @@ struct advk_pcie { + raw_spinlock_t irq_lock; + struct irq_domain *msi_domain; + struct irq_domain *msi_inner_domain; +- struct irq_chip msi_bottom_irq_chip; +- struct irq_chip msi_irq_chip; + struct msi_domain_info msi_domain_info; + DECLARE_BITMAP(msi_used, MSI_IRQ_NUM); + struct mutex msi_used_lock; +@@ -1199,6 +1197,12 @@ static int advk_msi_set_affinity(struct + return -EINVAL; + } + ++static struct irq_chip advk_msi_bottom_irq_chip = { ++ .name = "MSI", ++ .irq_compose_msi_msg = advk_msi_irq_compose_msi_msg, ++ .irq_set_affinity = advk_msi_set_affinity, ++}; ++ + static int advk_msi_irq_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *args) +@@ -1215,7 +1219,7 @@ static int advk_msi_irq_domain_alloc(str + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_info(domain, virq + i, hwirq + i, +- &pcie->msi_bottom_irq_chip, ++ &advk_msi_bottom_irq_chip, + domain->host_data, handle_simple_irq, + NULL, NULL); + +@@ -1285,29 +1289,23 @@ static const struct irq_domain_ops advk_ + .xlate = irq_domain_xlate_onecell, + }; + ++static struct irq_chip advk_msi_irq_chip = { ++ .name = "advk-MSI", ++}; ++ + static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) + { + struct device *dev = &pcie->pdev->dev; + struct device_node *node = dev->of_node; +- struct irq_chip *bottom_ic, *msi_ic; + struct msi_domain_info *msi_di; + phys_addr_t msi_msg_phys; + + mutex_init(&pcie->msi_used_lock); + +- bottom_ic = &pcie->msi_bottom_irq_chip; +- +- bottom_ic->name = "MSI"; +- bottom_ic->irq_compose_msi_msg = advk_msi_irq_compose_msi_msg; +- bottom_ic->irq_set_affinity = advk_msi_set_affinity; +- +- msi_ic = &pcie->msi_irq_chip; +- msi_ic->name = "advk-MSI"; +- + msi_di = &pcie->msi_domain_info; + msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_MULTI_PCI_MSI; +- msi_di->chip = msi_ic; ++ msi_di->chip = &advk_msi_irq_chip; + + msi_msg_phys = virt_to_phys(&pcie->msi_msg); + diff --git a/target/linux/generic/pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch b/target/linux/generic/pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch new file mode 100644 index 0000000000..2f15b5b8d6 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch @@ -0,0 +1,64 @@ +From c092ab8994f1f777054c0179a9deb40b87ee606f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 10 Jan 2022 00:10:46 +0100 +Subject: [PATCH] PCI: aardvark: Make msi_domain_info structure a static driver + structure +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Make Aardvark's msi_domain_info structure into a private driver structure. +Domain info is same for every potential instatination of a controller. + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -281,7 +281,6 @@ struct advk_pcie { + raw_spinlock_t irq_lock; + struct irq_domain *msi_domain; + struct irq_domain *msi_inner_domain; +- struct msi_domain_info msi_domain_info; + DECLARE_BITMAP(msi_used, MSI_IRQ_NUM); + struct mutex msi_used_lock; + u16 msi_msg; +@@ -1293,20 +1292,20 @@ static struct irq_chip advk_msi_irq_chip + .name = "advk-MSI", + }; + ++static struct msi_domain_info advk_msi_domain_info = { ++ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ++ MSI_FLAG_MULTI_PCI_MSI, ++ .chip = &advk_msi_irq_chip, ++}; ++ + static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) + { + struct device *dev = &pcie->pdev->dev; + struct device_node *node = dev->of_node; +- struct msi_domain_info *msi_di; + phys_addr_t msi_msg_phys; + + mutex_init(&pcie->msi_used_lock); + +- msi_di = &pcie->msi_domain_info; +- msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | +- MSI_FLAG_MULTI_PCI_MSI; +- msi_di->chip = &advk_msi_irq_chip; +- + msi_msg_phys = virt_to_phys(&pcie->msi_msg); + + advk_writel(pcie, lower_32_bits(msi_msg_phys), +@@ -1322,7 +1321,8 @@ static int advk_pcie_init_msi_irq_domain + + pcie->msi_domain = + pci_msi_create_irq_domain(of_node_to_fwnode(node), +- msi_di, pcie->msi_inner_domain); ++ &advk_msi_domain_info, ++ pcie->msi_inner_domain); + if (!pcie->msi_domain) { + irq_domain_remove(pcie->msi_inner_domain); + return -ENOMEM; diff --git a/target/linux/generic/pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch b/target/linux/generic/pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch new file mode 100644 index 0000000000..73f7cb9476 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch @@ -0,0 +1,40 @@ +From 59029739d42b439628e2f64f3d8f2db9be97deff Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 10 Jan 2022 00:15:17 +0100 +Subject: [PATCH] PCI: aardvark: Use dev_fwnode() instead of + of_node_to_fwnode(dev->of_node) +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use simple + dev_fwnode(dev) +instead of + struct device_node *node = dev->of_node; + of_node_to_fwnode(node) +especially since the node variable is not used elsewhere in the function. + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1301,7 +1301,6 @@ static struct msi_domain_info advk_msi_d + static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) + { + struct device *dev = &pcie->pdev->dev; +- struct device_node *node = dev->of_node; + phys_addr_t msi_msg_phys; + + mutex_init(&pcie->msi_used_lock); +@@ -1320,7 +1319,7 @@ static int advk_pcie_init_msi_irq_domain + return -ENOMEM; + + pcie->msi_domain = +- pci_msi_create_irq_domain(of_node_to_fwnode(node), ++ pci_msi_create_irq_domain(dev_fwnode(dev), + &advk_msi_domain_info, + pcie->msi_inner_domain); + if (!pcie->msi_domain) { diff --git a/target/linux/generic/pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch b/target/linux/generic/pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch new file mode 100644 index 0000000000..6cdaddc51c --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch @@ -0,0 +1,44 @@ +From 98feaf97bc64fc640a6c5b1394cd18fc7cd7dac8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Sun, 28 Mar 2021 14:34:49 +0200 +Subject: [PATCH] PCI: aardvark: Refactor unmasking summary MSI interrupt +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt +so that it corresponds to the comments: +- first mask all ISR0/1 +- then unmask all MSIs +- then unmask summary MSI interrupt + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 10 ++++++---- + 1 file changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -578,15 +578,17 @@ static void advk_pcie_setup_hw(struct ad + advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG); + + /* Disable All ISR0/1 Sources */ +- reg = PCIE_ISR0_ALL_MASK; +- reg &= ~PCIE_ISR0_MSI_INT_PENDING; +- advk_writel(pcie, reg, PCIE_ISR0_MASK_REG); +- ++ advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG); + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG); + + /* Unmask all MSIs */ + advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG); + ++ /* Unmask summary MSI interrupt */ ++ reg = advk_readl(pcie, PCIE_ISR0_MASK_REG); ++ reg &= ~PCIE_ISR0_MSI_INT_PENDING; ++ advk_writel(pcie, reg, PCIE_ISR0_MASK_REG); ++ + /* Enable summary interrupt for GIC SPI source */ + reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK); + advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG); diff --git a/target/linux/generic/pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch b/target/linux/generic/pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch new file mode 100644 index 0000000000..808094ebd8 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch @@ -0,0 +1,117 @@ +From 7f353accca6e4a3222991c65b1a6801503973bd3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 2 Jul 2021 16:44:10 +0200 +Subject: [PATCH] PCI: aardvark: Add support for masking MSI interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +We should not unmask MSIs at setup, but only when kernel asks for them +to be unmasked. + +At setup, mask all MSIs, and implement IRQ chip callbacks for masking +and unmasking particular MSIs. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 54 ++++++++++++++++++++++++--- + 1 file changed, 49 insertions(+), 5 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -281,6 +281,7 @@ struct advk_pcie { + raw_spinlock_t irq_lock; + struct irq_domain *msi_domain; + struct irq_domain *msi_inner_domain; ++ raw_spinlock_t msi_irq_lock; + DECLARE_BITMAP(msi_used, MSI_IRQ_NUM); + struct mutex msi_used_lock; + u16 msi_msg; +@@ -577,12 +578,10 @@ static void advk_pcie_setup_hw(struct ad + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG); + advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG); + +- /* Disable All ISR0/1 Sources */ ++ /* Disable All ISR0/1 and MSI Sources */ + advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG); + advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG); +- +- /* Unmask all MSIs */ +- advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG); ++ advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG); + + /* Unmask summary MSI interrupt */ + reg = advk_readl(pcie, PCIE_ISR0_MASK_REG); +@@ -1198,10 +1197,52 @@ static int advk_msi_set_affinity(struct + return -EINVAL; + } + ++static void advk_msi_irq_mask(struct irq_data *d) ++{ ++ struct advk_pcie *pcie = d->domain->host_data; ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ unsigned long flags; ++ u32 mask; ++ ++ raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags); ++ mask = advk_readl(pcie, PCIE_MSI_MASK_REG); ++ mask |= BIT(hwirq); ++ advk_writel(pcie, mask, PCIE_MSI_MASK_REG); ++ raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags); ++} ++ ++static void advk_msi_irq_unmask(struct irq_data *d) ++{ ++ struct advk_pcie *pcie = d->domain->host_data; ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ unsigned long flags; ++ u32 mask; ++ ++ raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags); ++ mask = advk_readl(pcie, PCIE_MSI_MASK_REG); ++ mask &= ~BIT(hwirq); ++ advk_writel(pcie, mask, PCIE_MSI_MASK_REG); ++ raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags); ++} ++ ++static void advk_msi_top_irq_mask(struct irq_data *d) ++{ ++ pci_msi_mask_irq(d); ++ irq_chip_mask_parent(d); ++} ++ ++static void advk_msi_top_irq_unmask(struct irq_data *d) ++{ ++ pci_msi_unmask_irq(d); ++ irq_chip_unmask_parent(d); ++} ++ + static struct irq_chip advk_msi_bottom_irq_chip = { + .name = "MSI", + .irq_compose_msi_msg = advk_msi_irq_compose_msi_msg, + .irq_set_affinity = advk_msi_set_affinity, ++ .irq_mask = advk_msi_irq_mask, ++ .irq_unmask = advk_msi_irq_unmask, + }; + + static int advk_msi_irq_domain_alloc(struct irq_domain *domain, +@@ -1291,7 +1332,9 @@ static const struct irq_domain_ops advk_ + }; + + static struct irq_chip advk_msi_irq_chip = { +- .name = "advk-MSI", ++ .name = "advk-MSI", ++ .irq_mask = advk_msi_top_irq_mask, ++ .irq_unmask = advk_msi_top_irq_unmask, + }; + + static struct msi_domain_info advk_msi_domain_info = { +@@ -1305,6 +1348,7 @@ static int advk_pcie_init_msi_irq_domain + struct device *dev = &pcie->pdev->dev; + phys_addr_t msi_msg_phys; + ++ raw_spin_lock_init(&pcie->msi_irq_lock); + mutex_init(&pcie->msi_used_lock); + + msi_msg_phys = virt_to_phys(&pcie->msi_msg); diff --git a/target/linux/generic/pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch b/target/linux/generic/pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch new file mode 100644 index 0000000000..4807f24a12 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patch @@ -0,0 +1,91 @@ +From fa73c200f181436eab859374657c53a73778d8ad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 26 Mar 2021 17:35:44 +0100 +Subject: [PATCH] PCI: aardvark: Fix setting MSI address +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +MSI address for receiving MSI interrupts needs to be correctly set before +enabling processing of MSI interrupts. + +Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG +from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before +enabling PCIE_CORE_CTRL2_MSI_ENABLE. + +After this we can remove the now unused member msi_msg, which was used +only for MSI doorbell address. MSI address can be any address which cannot +be used to DMA to. So change it to the address of the main struct advk_pcie. + +Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") +Signed-off-by: Pali Rohár +Acked-by: Marc Zyngier +Signed-off-by: Marek Behún +Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") +--- + drivers/pci/controller/pci-aardvark.c | 21 +++++++++------------ + 1 file changed, 9 insertions(+), 12 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -284,7 +284,6 @@ struct advk_pcie { + raw_spinlock_t msi_irq_lock; + DECLARE_BITMAP(msi_used, MSI_IRQ_NUM); + struct mutex msi_used_lock; +- u16 msi_msg; + int link_gen; + struct pci_bridge_emul bridge; + struct gpio_desc *reset_gpio; +@@ -479,6 +478,7 @@ static void advk_pcie_disable_ob_win(str + + static void advk_pcie_setup_hw(struct advk_pcie *pcie) + { ++ phys_addr_t msi_addr; + u32 reg; + int i; + +@@ -567,6 +567,11 @@ static void advk_pcie_setup_hw(struct ad + reg |= LANE_COUNT_1; + advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); + ++ /* Set MSI address */ ++ msi_addr = virt_to_phys(pcie); ++ advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG); ++ advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG); ++ + /* Enable MSI */ + reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG); + reg |= PCIE_CORE_CTRL2_MSI_ENABLE; +@@ -1184,10 +1189,10 @@ static void advk_msi_irq_compose_msi_msg + struct msi_msg *msg) + { + struct advk_pcie *pcie = irq_data_get_irq_chip_data(data); +- phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg); ++ phys_addr_t msi_addr = virt_to_phys(pcie); + +- msg->address_lo = lower_32_bits(msi_msg); +- msg->address_hi = upper_32_bits(msi_msg); ++ msg->address_lo = lower_32_bits(msi_addr); ++ msg->address_hi = upper_32_bits(msi_addr); + msg->data = data->hwirq; + } + +@@ -1346,18 +1351,10 @@ static struct msi_domain_info advk_msi_d + static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) + { + struct device *dev = &pcie->pdev->dev; +- phys_addr_t msi_msg_phys; + + raw_spin_lock_init(&pcie->msi_irq_lock); + mutex_init(&pcie->msi_used_lock); + +- msi_msg_phys = virt_to_phys(&pcie->msi_msg); +- +- advk_writel(pcie, lower_32_bits(msi_msg_phys), +- PCIE_MSI_ADDR_LOW_REG); +- advk_writel(pcie, upper_32_bits(msi_msg_phys), +- PCIE_MSI_ADDR_HIGH_REG); +- + pcie->msi_inner_domain = + irq_domain_add_linear(NULL, MSI_IRQ_NUM, + &advk_msi_domain_ops, pcie); diff --git a/target/linux/generic/pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch b/target/linux/generic/pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch new file mode 100644 index 0000000000..20757c7a80 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch @@ -0,0 +1,38 @@ +From 735a4ac9782b96fbe1543c578aa8334364f21abd Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 2 Apr 2021 14:05:24 +0200 +Subject: [PATCH] PCI: aardvark: Enable MSI-X support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +According to PCI 3.0 specification, sending both MSI and MSI-X interrupts +is done by DWORD memory write operation to doorbell message address. The +write operation for MSI has zero upper 16 bits and the MSI interrupt number +in the lower 16 bits, while the write operation for MSI-X contains a 32-bit +value from MSI-X table. + +Since the driver only uses interrupt numbers from range 0..31, the upper +16 bits of the DWORD memory write operation to doorbell message address +are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts. + +Testing proves that kernel can correctly receive MSI-X interrupts from PCIe +cards which supports both MSI and MSI-X interrupts. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1344,7 +1344,7 @@ static struct irq_chip advk_msi_irq_chip + + static struct msi_domain_info advk_msi_domain_info = { + .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | +- MSI_FLAG_MULTI_PCI_MSI, ++ MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX, + .chip = &advk_msi_irq_chip, + }; + diff --git a/target/linux/generic/pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch b/target/linux/generic/pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch new file mode 100644 index 0000000000..eb27610aa3 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch @@ -0,0 +1,100 @@ +From 7f3e55a3890fa26d15e2e4e90213962d1a7f6df9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 12 Feb 2021 20:32:55 +0100 +Subject: [PATCH] PCI: aardvark: Add support for ERR interrupt on emulated + bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +ERR interrupt is triggered when corresponding bit is unmasked in both ISR0 +and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register +is not enough. This means that currently the ERR interrupt is never +triggered. + +Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not +triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register, +which is done by AER driver. So it is safe to unconditionally unmask all +ERR bits in aardvark probe. + +Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits +in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt +on GIC. Chain this interrupt to PCIe interrupt 0 with +generic_handle_domain_irq() to allow processing of ERR interrupts. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 36 ++++++++++++++++++++++++++- + 1 file changed, 35 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -97,6 +97,10 @@ + #define PCIE_MSG_PM_PME_MASK BIT(7) + #define PCIE_ISR0_MASK_REG (CONTROL_BASE_ADDR + 0x44) + #define PCIE_ISR0_MSI_INT_PENDING BIT(24) ++#define PCIE_ISR0_CORR_ERR BIT(11) ++#define PCIE_ISR0_NFAT_ERR BIT(12) ++#define PCIE_ISR0_FAT_ERR BIT(13) ++#define PCIE_ISR0_ERR_MASK GENMASK(13, 11) + #define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val)) + #define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val)) + #define PCIE_ISR0_ALL_MASK GENMASK(31, 0) +@@ -785,11 +789,15 @@ advk_pci_bridge_emul_base_conf_read(stru + case PCI_INTERRUPT_LINE: { + /* + * From the whole 32bit register we support reading from HW only +- * one bit: PCI_BRIDGE_CTL_BUS_RESET. ++ * two bits: PCI_BRIDGE_CTL_BUS_RESET and PCI_BRIDGE_CTL_SERR. + * Other bits are retrieved only from emulated config buffer. + */ + __le32 *cfgspace = (__le32 *)&bridge->conf; + u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]); ++ if (advk_readl(pcie, PCIE_ISR0_MASK_REG) & PCIE_ISR0_ERR_MASK) ++ val &= ~(PCI_BRIDGE_CTL_SERR << 16); ++ else ++ val |= PCI_BRIDGE_CTL_SERR << 16; + if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN) + val |= PCI_BRIDGE_CTL_BUS_RESET << 16; + else +@@ -815,6 +823,19 @@ advk_pci_bridge_emul_base_conf_write(str + break; + + case PCI_INTERRUPT_LINE: ++ /* ++ * According to Figure 6-3: Pseudo Logic Diagram for Error ++ * Message Controls in PCIe base specification, SERR# Enable bit ++ * in Bridge Control register enable receiving of ERR_* messages ++ */ ++ if (mask & (PCI_BRIDGE_CTL_SERR << 16)) { ++ u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG); ++ if (new & (PCI_BRIDGE_CTL_SERR << 16)) ++ val &= ~PCIE_ISR0_ERR_MASK; ++ else ++ val |= PCIE_ISR0_ERR_MASK; ++ advk_writel(pcie, val, PCIE_ISR0_MASK_REG); ++ } + if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) { + u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG); + if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16)) +@@ -1466,6 +1487,19 @@ static void advk_pcie_handle_int(struct + isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG); + isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK); + ++ /* Process ERR interrupt */ ++ if (isr0_status & PCIE_ISR0_ERR_MASK) { ++ advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG); ++ ++ /* ++ * Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use ++ * PCIe interrupt 0 ++ */ ++ virq = irq_find_mapping(pcie->irq_domain, 0); ++ if (generic_handle_irq(virq) == -EINVAL) ++ dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n"); ++ } ++ + /* Process MSI interrupts */ + if (isr0_status & PCIE_ISR0_MSI_INT_PENDING) + advk_pcie_handle_msi(pcie); diff --git a/target/linux/generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch b/target/linux/generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch new file mode 100644 index 0000000000..4a2cd77144 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch @@ -0,0 +1,44 @@ +From 5f354992eeef9a51c67796dc9f7f578d3584baa2 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Wed, 8 Dec 2021 05:57:54 +0100 +Subject: [PATCH] PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated + bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The emulated bridge returns incorrect value for PCI_EXP_RTSTA register +during readout in advk_pci_bridge_emul_pcie_conf_read() function: the +correct bit is BIT(16), but we are setting BIT(23), because the code +does + *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 +where + PCIE_MSG_PM_PME_MASK +is + BIT(7). + +The code should probably have been something like + *value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16, +but we are better of using an if() and using the proper macro for this +bit. + +Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -874,7 +874,9 @@ advk_pci_bridge_emul_pcie_conf_read(stru + case PCI_EXP_RTSTA: { + u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG); + u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG); +- *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 | (msglog >> 16); ++ *value = msglog >> 16; ++ if (isr0 & PCIE_MSG_PM_PME_MASK) ++ *value |= PCI_EXP_RTSTA_PME; + return PCI_BRIDGE_EMUL_HANDLED; + } + diff --git a/target/linux/generic/pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch b/target/linux/generic/pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch new file mode 100644 index 0000000000..5ed809def2 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch @@ -0,0 +1,52 @@ +From 3fe0073d116d9902df08761c1cf0d733dd4c38fc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Wed, 8 Dec 2021 06:03:50 +0100 +Subject: [PATCH] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and + PCI_EXP_RTSTA_PME on emulated bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch +PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really +needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 20 +++++++++++--------- + 1 file changed, 11 insertions(+), 9 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -932,19 +932,21 @@ advk_pci_bridge_emul_pcie_conf_write(str + advk_pcie_wait_for_retrain(pcie); + break; + +- case PCI_EXP_RTCTL: { ++ case PCI_EXP_RTCTL: + /* Only mask/unmask PME interrupt */ +- u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) & +- ~PCIE_MSG_PM_PME_MASK; +- if ((new & PCI_EXP_RTCTL_PMEIE) == 0) +- val |= PCIE_MSG_PM_PME_MASK; +- advk_writel(pcie, val, PCIE_ISR0_MASK_REG); ++ if (mask & PCI_EXP_RTCTL_PMEIE) { ++ u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG); ++ if (new & PCI_EXP_RTCTL_PMEIE) ++ val &= ~PCIE_MSG_PM_PME_MASK; ++ else ++ val |= PCIE_MSG_PM_PME_MASK; ++ advk_writel(pcie, val, PCIE_ISR0_MASK_REG); ++ } + break; +- } + + case PCI_EXP_RTSTA: +- new = (new & PCI_EXP_RTSTA_PME) >> 9; +- advk_writel(pcie, new, PCIE_ISR0_REG); ++ if (new & PCI_EXP_RTSTA_PME) ++ advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG); + break; + + case PCI_EXP_DEVCTL: diff --git a/target/linux/generic/pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch b/target/linux/generic/pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch new file mode 100644 index 0000000000..4272b6dd6e --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch @@ -0,0 +1,47 @@ +From 7acd8ef92e8789e10b5d736d73cea3b625087f26 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Wed, 8 Dec 2021 06:07:44 +0100 +Subject: [PATCH] PCI: aardvark: Add support for PME interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does +nothing. This is because PCIe PME driver expects to receive PCIe interrupt +defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not +trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom +aardvark interrupt which this driver is not processing yet. + +Fix this issue by handling PME interrupt in advk_pcie_handle_int() and +chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since +aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver +finally starts receiving PME interrupt. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1491,6 +1491,19 @@ static void advk_pcie_handle_int(struct + isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG); + isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK); + ++ /* Process PME interrupt */ ++ if (isr0_status & PCIE_MSG_PM_PME_MASK) { ++ /* ++ * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ ++ * receiver by writing to the PCI_EXP_RTSTA register of emulated ++ * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ, ++ * so use PCIe interrupt 0. ++ */ ++ virq = irq_find_mapping(pcie->irq_domain, 0); ++ if (generic_handle_irq(virq) == -EINVAL) ++ dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n"); ++ } ++ + /* Process ERR interrupt */ + if (isr0_status & PCIE_ISR0_ERR_MASK) { + advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG); diff --git a/target/linux/generic/pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch b/target/linux/generic/pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch new file mode 100644 index 0000000000..6aa7dcbd76 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch @@ -0,0 +1,173 @@ +From 68727b545332327b4c2f9c0f8d006be8970e7832 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 19 Feb 2021 14:22:22 +0100 +Subject: [PATCH] PCI: aardvark: Fix support for PME requester on emulated + bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Enable aardvark PME interrupt unconditionally by unmasking it and read PME +requester ID to emulated bridge config space immediately after receiving +interrupt. + +PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains +the last inbound message. So when new inbound message is received by HW +(including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by +a new value. + +PCIe specification mandates that subsequent PMEs are kept pending until the +PME Status Register bit is cleared by software by writing a 1b. + +Support for masking/unmasking PME interrupt on emulated bridge via +PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config +space, to ensure that we do not miss any aardvark PME interrupt. + +Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final +value is now always stored into emulated bridge config space by the +interrupt handler, so there is no need to implement support for these +registers in read_pcie callback. + +Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done +by pci-bridge-emul.c code for emulated bridge config space. So there is no +need to implement support for clearing this bit in write_pcie callback. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 94 +++++++++++++++------------ + 1 file changed, 52 insertions(+), 42 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -597,6 +597,11 @@ static void advk_pcie_setup_hw(struct ad + reg &= ~PCIE_ISR0_MSI_INT_PENDING; + advk_writel(pcie, reg, PCIE_ISR0_MASK_REG); + ++ /* Unmask PME interrupt for processing of PME requester */ ++ reg = advk_readl(pcie, PCIE_ISR0_MASK_REG); ++ reg &= ~PCIE_MSG_PM_PME_MASK; ++ advk_writel(pcie, reg, PCIE_ISR0_MASK_REG); ++ + /* Enable summary interrupt for GIC SPI source */ + reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK); + advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG); +@@ -863,22 +868,11 @@ advk_pci_bridge_emul_pcie_conf_read(stru + *value = PCI_EXP_SLTSTA_PDS << 16; + return PCI_BRIDGE_EMUL_HANDLED; + +- case PCI_EXP_RTCTL: { +- u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG); +- *value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE; +- *value |= le16_to_cpu(bridge->pcie_conf.rootctl) & PCI_EXP_RTCTL_CRSSVE; +- *value |= PCI_EXP_RTCAP_CRSVIS << 16; +- return PCI_BRIDGE_EMUL_HANDLED; +- } +- +- case PCI_EXP_RTSTA: { +- u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG); +- u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG); +- *value = msglog >> 16; +- if (isr0 & PCIE_MSG_PM_PME_MASK) +- *value |= PCI_EXP_RTSTA_PME; +- return PCI_BRIDGE_EMUL_HANDLED; +- } ++ /* ++ * PCI_EXP_RTCTL and PCI_EXP_RTSTA are also supported, but do not need ++ * to be handled here, because their values are stored in emulated ++ * config space buffer, and we read them from there when needed. ++ */ + + case PCI_EXP_LNKCAP: { + u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg); +@@ -932,22 +926,19 @@ advk_pci_bridge_emul_pcie_conf_write(str + advk_pcie_wait_for_retrain(pcie); + break; + +- case PCI_EXP_RTCTL: +- /* Only mask/unmask PME interrupt */ +- if (mask & PCI_EXP_RTCTL_PMEIE) { +- u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG); +- if (new & PCI_EXP_RTCTL_PMEIE) +- val &= ~PCIE_MSG_PM_PME_MASK; +- else +- val |= PCIE_MSG_PM_PME_MASK; +- advk_writel(pcie, val, PCIE_ISR0_MASK_REG); +- } ++ case PCI_EXP_RTCTL: { ++ u16 rootctl = le16_to_cpu(bridge->pcie_conf.rootctl); ++ /* Only emulation of PMEIE and CRSSVE bits is provided */ ++ rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_CRSSVE; ++ bridge->pcie_conf.rootctl = cpu_to_le16(rootctl); + break; ++ } + +- case PCI_EXP_RTSTA: +- if (new & PCI_EXP_RTSTA_PME) +- advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG); +- break; ++ /* ++ * PCI_EXP_RTSTA is also supported, but does not need to be handled ++ * here, because its value is stored in emulated config space buffer, ++ * and we write it there when needed. ++ */ + + case PCI_EXP_DEVCTL: + case PCI_EXP_DEVCTL2: +@@ -1452,6 +1443,34 @@ static void advk_pcie_remove_irq_domain( + irq_domain_remove(pcie->irq_domain); + } + ++static void advk_pcie_handle_pme(struct advk_pcie *pcie) ++{ ++ u32 requester = advk_readl(pcie, PCIE_MSG_LOG_REG) >> 16; ++ int virq; ++ ++ advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG); ++ ++ /* ++ * PCIE_MSG_LOG_REG contains the last inbound message, so store ++ * the requester ID only when PME was not asserted yet. ++ * Also do not trigger PME interrupt when PME is still asserted. ++ */ ++ if (!(le32_to_cpu(pcie->bridge.pcie_conf.rootsta) & PCI_EXP_RTSTA_PME)) { ++ pcie->bridge.pcie_conf.rootsta = cpu_to_le32(requester | PCI_EXP_RTSTA_PME); ++ ++ /* ++ * Trigger PME interrupt only if PMEIE bit in Root Control is set. ++ * Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ, so use PCIe interrupt 0. ++ */ ++ if (!(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & PCI_EXP_RTCTL_PMEIE)) ++ return; ++ ++ virq = irq_find_mapping(pcie->irq_domain, 0); ++ if (generic_handle_irq(virq) == -EINVAL) ++ dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n"); ++ } ++} ++ + static void advk_pcie_handle_msi(struct advk_pcie *pcie) + { + u32 msi_val, msi_mask, msi_status, msi_idx; +@@ -1491,18 +1510,9 @@ static void advk_pcie_handle_int(struct + isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG); + isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK); + +- /* Process PME interrupt */ +- if (isr0_status & PCIE_MSG_PM_PME_MASK) { +- /* +- * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ +- * receiver by writing to the PCI_EXP_RTSTA register of emulated +- * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ, +- * so use PCIe interrupt 0. +- */ +- virq = irq_find_mapping(pcie->irq_domain, 0); +- if (generic_handle_irq(virq) == -EINVAL) +- dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n"); +- } ++ /* Process PME interrupt as the first one to do not miss PME requester id */ ++ if (isr0_status & PCIE_MSG_PM_PME_MASK) ++ advk_pcie_handle_pme(pcie); + + /* Process ERR interrupt */ + if (isr0_status & PCIE_ISR0_ERR_MASK) { diff --git a/target/linux/generic/pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch b/target/linux/generic/pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch new file mode 100644 index 0000000000..e9f65aca23 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch @@ -0,0 +1,161 @@ +From db305233136f5aa2444a8287a279384e8458c458 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 1 Apr 2021 20:12:48 +0200 +Subject: [PATCH] PCI: aardvark: Use separate INTA interrupt for emulated root + bridge +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Emulated root bridge currently provides only one Legacy INTA interrupt +which is used for reporting PCIe PME and ERR events and handled by kernel +PCIe PME and AER drivers. + +Aardvark HW reports these PME and ERR events separately, so there is no +need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME +and AER drivers. + +Register a new advk-RP (as in Root Port) irq chip and a new irq domain +for emulated root bridge and use this new separate irq domain for +providing INTA interrupt from emulated root bridge for PME and ERR events. + +The real INTA interrupt from real devices is now separate. + +A custom map_irq callback function on PCI host bridge structure is used to +allocate IRQ mapping for emulated root bridge from new irq domain. Original +callback of_irq_parse_and_map_pci() is used for all other devices as before. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 69 ++++++++++++++++++++++++++- + 1 file changed, 67 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -280,6 +280,7 @@ struct advk_pcie { + } wins[OB_WIN_COUNT]; + u8 wins_count; + int irq; ++ struct irq_domain *rp_irq_domain; + struct irq_domain *irq_domain; + struct irq_chip irq_chip; + raw_spinlock_t irq_lock; +@@ -1443,6 +1444,44 @@ static void advk_pcie_remove_irq_domain( + irq_domain_remove(pcie->irq_domain); + } + ++static struct irq_chip advk_rp_irq_chip = { ++ .name = "advk-RP", ++}; ++ ++static int advk_pcie_rp_irq_map(struct irq_domain *h, ++ unsigned int virq, irq_hw_number_t hwirq) ++{ ++ struct advk_pcie *pcie = h->host_data; ++ ++ irq_set_chip_and_handler(virq, &advk_rp_irq_chip, handle_simple_irq); ++ irq_set_chip_data(virq, pcie); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops advk_pcie_rp_irq_domain_ops = { ++ .map = advk_pcie_rp_irq_map, ++ .xlate = irq_domain_xlate_onecell, ++}; ++ ++static int advk_pcie_init_rp_irq_domain(struct advk_pcie *pcie) ++{ ++ pcie->rp_irq_domain = irq_domain_add_linear(NULL, 1, ++ &advk_pcie_rp_irq_domain_ops, ++ pcie); ++ if (!pcie->rp_irq_domain) { ++ dev_err(&pcie->pdev->dev, "Failed to add Root Port IRQ domain\n"); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static void advk_pcie_remove_rp_irq_domain(struct advk_pcie *pcie) ++{ ++ irq_domain_remove(pcie->rp_irq_domain); ++} ++ + static void advk_pcie_handle_pme(struct advk_pcie *pcie) + { + u32 requester = advk_readl(pcie, PCIE_MSG_LOG_REG) >> 16; +@@ -1465,7 +1504,7 @@ static void advk_pcie_handle_pme(struct + if (!(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & PCI_EXP_RTCTL_PMEIE)) + return; + +- virq = irq_find_mapping(pcie->irq_domain, 0); ++ virq = irq_find_mapping(pcie->rp_irq_domain, 0); + if (generic_handle_irq(virq) == -EINVAL) + dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n"); + } +@@ -1522,7 +1561,7 @@ static void advk_pcie_handle_int(struct + * Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use + * PCIe interrupt 0 + */ +- virq = irq_find_mapping(pcie->irq_domain, 0); ++ virq = irq_find_mapping(pcie->rp_irq_domain, 0); + if (generic_handle_irq(virq) == -EINVAL) + dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n"); + } +@@ -1568,6 +1607,21 @@ static void advk_pcie_irq_handler(struct + chained_irq_exit(chip, desc); + } + ++static int advk_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ struct advk_pcie *pcie = dev->bus->sysdata; ++ ++ /* ++ * Emulated root bridge has its own emulated irq chip and irq domain. ++ * Argument pin is the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) and ++ * hwirq for irq_create_mapping() is indexed from zero. ++ */ ++ if (pci_is_root_bus(dev->bus)) ++ return irq_create_mapping(pcie->rp_irq_domain, pin - 1); ++ else ++ return of_irq_parse_and_map_pci(dev, slot, pin); ++} ++ + static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie) + { + phy_power_off(pcie->phy); +@@ -1771,14 +1825,24 @@ static int advk_pcie_probe(struct platfo + return ret; + } + ++ ret = advk_pcie_init_rp_irq_domain(pcie); ++ if (ret) { ++ dev_err(dev, "Failed to initialize irq\n"); ++ advk_pcie_remove_msi_irq_domain(pcie); ++ advk_pcie_remove_irq_domain(pcie); ++ return ret; ++ } ++ + irq_set_chained_handler_and_data(pcie->irq, advk_pcie_irq_handler, pcie); + + bridge->sysdata = pcie; + bridge->ops = &advk_pcie_ops; ++ bridge->map_irq = advk_pcie_map_irq; + + ret = pci_host_probe(bridge); + if (ret < 0) { + irq_set_chained_handler_and_data(pcie->irq, NULL, NULL); ++ advk_pcie_remove_rp_irq_domain(pcie); + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + return ret; +@@ -1830,6 +1894,7 @@ static int advk_pcie_remove(struct platf + irq_set_chained_handler_and_data(pcie->irq, NULL, NULL); + + /* Remove IRQ domains */ ++ advk_pcie_remove_rp_irq_domain(pcie); + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + diff --git a/target/linux/generic/pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch b/target/linux/generic/pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch new file mode 100644 index 0000000000..75f31ba19e --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch @@ -0,0 +1,29 @@ +From 8c9eef96e24f34ff8b62b230700416b822691a37 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 1 Apr 2021 14:24:12 +0200 +Subject: [PATCH] PCI: aardvark: Remove irq_mask_ack callback for INTx + interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Callback for irq_mask_ack is the same as for irq_mask. As there is no +special handling for irq_ack, there is no need to define irq_mask_ack too. + +Signed-off-by: Pali Rohár +Acked-by: Marc Zyngier +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1422,7 +1422,6 @@ static int advk_pcie_init_irq_domain(str + } + + irq_chip->irq_mask = advk_pcie_irq_mask; +- irq_chip->irq_mask_ack = advk_pcie_irq_mask; + irq_chip->irq_unmask = advk_pcie_irq_unmask; + + pcie->irq_domain = diff --git a/target/linux/generic/pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch b/target/linux/generic/pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch new file mode 100644 index 0000000000..5583dc1b6f --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch @@ -0,0 +1,27 @@ +From dc01fca5a9d9c09ce9a3fb2bc2e7715c37ff3bd9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 1 Apr 2021 14:30:06 +0200 +Subject: [PATCH] PCI: aardvark: Don't mask irq when mapping +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +By default, all Legacy INTx interrupts are masked, so there is no need to +mask this interrupt during irq_map callback. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1339,7 +1339,6 @@ static int advk_pcie_irq_map(struct irq_ + { + struct advk_pcie *pcie = h->host_data; + +- advk_pcie_irq_mask(irq_get_irq_data(virq)); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &pcie->irq_chip, + handle_level_irq); diff --git a/target/linux/generic/pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch b/target/linux/generic/pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch new file mode 100644 index 0000000000..f359663ca4 --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch @@ -0,0 +1,28 @@ +From a511c99262ce19ee06908d27212b39ec4c5aeb17 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Wed, 8 Dec 2021 04:40:29 +0100 +Subject: [PATCH] PCI: aardvark: Drop __maybe_unused from + advk_pcie_disable_phy() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This function is now always used in driver remove method, drop the +__maybe_unused attribute. + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1620,7 +1620,7 @@ static int advk_pcie_map_irq(const struc + return of_irq_parse_and_map_pci(dev, slot, pin); + } + +-static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie) ++static void advk_pcie_disable_phy(struct advk_pcie *pcie) + { + phy_power_off(pcie->phy); + phy_exit(pcie->phy); diff --git a/target/linux/generic/pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch b/target/linux/generic/pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch new file mode 100644 index 0000000000..cc489ebc8a --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch @@ -0,0 +1,35 @@ +From bafda858364003a70b9cda84282f9761587f8033 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 10 Jan 2022 00:47:38 +0100 +Subject: [PATCH] PCI: aardvark: Update comment about link going down after + link-up +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Update the comment about what happens when link goes down after we have +checked for link-up. If a PIO request is done while link-down, we have +a serious problem. + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1005,8 +1005,12 @@ static bool advk_pcie_valid_device(struc + return false; + + /* +- * If the link goes down after we check for link-up, nothing bad +- * happens but the config access times out. ++ * If the link goes down after we check for link-up, we have a problem: ++ * if a PIO request is executed while link-down, the whole controller ++ * gets stuck in a non-functional state, and even after link comes up ++ * again, PIO requests won't work anymore, and a reset of the whole PCIe ++ * controller is needed. Therefore we need to prevent sending PIO ++ * requests while the link is down. + */ + if (!pci_is_root_bus(bus) && !advk_pcie_link_up(pcie)) + return false; diff --git a/target/linux/generic/pending-5.15/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch b/target/linux/generic/pending-5.15/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch new file mode 100644 index 0000000000..a5e2d8a3dd --- /dev/null +++ b/target/linux/generic/pending-5.15/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch @@ -0,0 +1,102 @@ +From 663b9f99bb35dbc0c7b685f71ee3668a60d31320 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 10 Jan 2022 02:02:00 +0100 +Subject: [PATCH] PCI: aardvark: Make main irq_chip structure a static driver + structure +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Marc Zyngier says [1] that we should use struct irq_chip as a global +static struct in the driver. Even though the structure currently +contains a dynamic member (parent_device), Marc says [2] that he plans +to kill it and make the structure completely static. + +We have already converted others irq_chip structures in this driver in +this way, but we omitted this one because the .name member is +dynamically created from device's name, and the name is displayed in +sysfs, so changing it would break sysfs ABI. + +The rationale for changing the name (to "advk-INT") in spite of sysfs +ABI, and thus allowing to convert to a static structure, is that after +the other changes we made in this series, the IRQ chip is basically +something different: it no logner generates ERR and PME interrupts (they +are generated by emulated bridge's rp_irq_chip). + +[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/ +[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/ + +Signed-off-by: Marek Behún +--- + drivers/pci/controller/pci-aardvark.c | 25 +++++++------------------ + 1 file changed, 7 insertions(+), 18 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -282,7 +282,6 @@ struct advk_pcie { + int irq; + struct irq_domain *rp_irq_domain; + struct irq_domain *irq_domain; +- struct irq_chip irq_chip; + raw_spinlock_t irq_lock; + struct irq_domain *msi_domain; + struct irq_domain *msi_inner_domain; +@@ -1338,14 +1337,19 @@ static void advk_pcie_irq_unmask(struct + raw_spin_unlock_irqrestore(&pcie->irq_lock, flags); + } + ++static struct irq_chip advk_irq_chip = { ++ .name = "advk-INT", ++ .irq_mask = advk_pcie_irq_mask, ++ .irq_unmask = advk_pcie_irq_unmask, ++}; ++ + static int advk_pcie_irq_map(struct irq_domain *h, + unsigned int virq, irq_hw_number_t hwirq) + { + struct advk_pcie *pcie = h->host_data; + + irq_set_status_flags(virq, IRQ_LEVEL); +- irq_set_chip_and_handler(virq, &pcie->irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(virq, &advk_irq_chip, handle_level_irq); + irq_set_chip_data(virq, pcie); + + return 0; +@@ -1404,7 +1408,6 @@ static int advk_pcie_init_irq_domain(str + struct device *dev = &pcie->pdev->dev; + struct device_node *node = dev->of_node; + struct device_node *pcie_intc_node; +- struct irq_chip *irq_chip; + int ret = 0; + + raw_spin_lock_init(&pcie->irq_lock); +@@ -1415,28 +1418,14 @@ static int advk_pcie_init_irq_domain(str + return -ENODEV; + } + +- irq_chip = &pcie->irq_chip; +- +- irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq", +- dev_name(dev)); +- if (!irq_chip->name) { +- ret = -ENOMEM; +- goto out_put_node; +- } +- +- irq_chip->irq_mask = advk_pcie_irq_mask; +- irq_chip->irq_unmask = advk_pcie_irq_unmask; +- + pcie->irq_domain = + irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX, + &advk_pcie_irq_domain_ops, pcie); + if (!pcie->irq_domain) { + dev_err(dev, "Failed to get a INTx IRQ domain\n"); + ret = -ENOMEM; +- goto out_put_node; + } + +-out_put_node: + of_node_put(pcie_intc_node); + return ret; + } diff --git a/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch b/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch new file mode 100644 index 0000000000..4a963be952 --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch @@ -0,0 +1,217 @@ +From a719f7ba7fcba05d85801c6f0267f389a21627c1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Fri, 24 Sep 2021 13:03:02 +0200 +Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver + configuration +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Port number is encoded into argument for SMC call. It is zero for SATA, +PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY +(incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero +port number. + +So construct "port" bits for SMC call argument can be constructed directly +from PHY type and lane number. + +Change driver code to always pass zero port number for non-ethernet PHYs +and for ethernet PHYs determinate port number from lane number. This +simplifies the driver. + +As port number from DT PHY configuration is not used anymore, remove whole +driver code which parses it. This also simplifies the driver. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Reviewed-by: Miquel Raynal +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 62 +++++++++----------- + 1 file changed, 29 insertions(+), 33 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -20,7 +20,6 @@ + #include + + #define MVEBU_A3700_COMPHY_LANES 3 +-#define MVEBU_A3700_COMPHY_PORTS 2 + + /* COMPHY Fast SMC function identifiers */ + #define COMPHY_SIP_POWER_ON 0x82000001 +@@ -45,51 +44,47 @@ + #define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ + ((idx) << 8) | \ + ((speed) << 2)) +-#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \ ++#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ + ((width) << 18)) + + struct mvebu_a3700_comphy_conf { + unsigned int lane; + enum phy_mode mode; + int submode; +- unsigned int port; + u32 fw_mode; + }; + +-#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \ ++#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ + { \ + .lane = _lane, \ + .mode = _mode, \ + .submode = _smode, \ +- .port = _port, \ + .fw_mode = _fw, \ + } + +-#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw) ++#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) + +-#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw) ++#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) + + static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { + /* lane 0 */ +- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, + COMPHY_FW_MODE_USB3H), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, + COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, + COMPHY_FW_MODE_2500BASEX), + /* lane 1 */ +- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, +- COMPHY_FW_MODE_PCIE), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, + COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, + COMPHY_FW_MODE_2500BASEX), + /* lane 2 */ +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, +- COMPHY_FW_MODE_SATA), +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, + COMPHY_FW_MODE_USB3H), + }; + +@@ -98,7 +93,6 @@ struct mvebu_a3700_comphy_lane { + unsigned int id; + enum phy_mode mode; + int submode; +- int port; + }; + + static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, +@@ -120,7 +114,7 @@ static int mvebu_a3700_comphy_smc(unsign + } + } + +-static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, ++static int mvebu_a3700_comphy_get_fw_mode(int lane, + enum phy_mode mode, + int submode) + { +@@ -132,7 +126,6 @@ static int mvebu_a3700_comphy_get_fw_mod + + for (i = 0; i < n; i++) { + if (mvebu_a3700_comphy_modes[i].lane == lane && +- mvebu_a3700_comphy_modes[i].port == port && + mvebu_a3700_comphy_modes[i].mode == mode && + mvebu_a3700_comphy_modes[i].submode == submode) + break; +@@ -153,7 +146,7 @@ static int mvebu_a3700_comphy_set_mode(s + if (submode == PHY_INTERFACE_MODE_1000BASEX) + submode = PHY_INTERFACE_MODE_SGMII; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode, ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, + submode); + if (fw_mode < 0) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +@@ -172,9 +165,10 @@ static int mvebu_a3700_comphy_power_on(s + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); + u32 fw_param; + int fw_mode; ++ int fw_port; + int ret; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, + lane->mode, lane->submode); + if (fw_mode < 0) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +@@ -191,17 +185,18 @@ static int mvebu_a3700_comphy_power_on(s + fw_param = COMPHY_FW_MODE(fw_mode); + break; + case PHY_MODE_ETHERNET: ++ fw_port = (lane->id == 0) ? 1 : 0; + switch (lane->submode) { + case PHY_INTERFACE_MODE_SGMII: + dev_dbg(lane->dev, "set lane %d to SGMII mode\n", + lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ fw_param = COMPHY_FW_NET(fw_mode, fw_port, + COMPHY_FW_SPEED_1_25G); + break; + case PHY_INTERFACE_MODE_2500BASEX: + dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", + lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ fw_param = COMPHY_FW_NET(fw_mode, fw_port, + COMPHY_FW_SPEED_3_125G); + break; + default: +@@ -212,8 +207,7 @@ static int mvebu_a3700_comphy_power_on(s + break; + case PHY_MODE_PCIE: + dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); +- fw_param = COMPHY_FW_PCIE(fw_mode, lane->port, +- COMPHY_FW_SPEED_5G, ++ fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, + phy->attrs.bus_width); + break; + default: +@@ -247,17 +241,20 @@ static struct phy *mvebu_a3700_comphy_xl + struct of_phandle_args *args) + { + struct mvebu_a3700_comphy_lane *lane; ++ unsigned int port; + struct phy *phy; + +- if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS)) +- return ERR_PTR(-EINVAL); +- + phy = of_phy_simple_xlate(dev, args); + if (IS_ERR(phy)) + return phy; + + lane = phy_get_drvdata(phy); +- lane->port = args->args[0]; ++ ++ port = args->args[0]; ++ if (port != 0 && (port != 1 || lane->id != 0)) { ++ dev_err(lane->dev, "invalid port number %u\n", port); ++ return ERR_PTR(-EINVAL); ++ } + + return phy; + } +@@ -302,7 +299,6 @@ static int mvebu_a3700_comphy_probe(stru + lane->mode = PHY_MODE_INVALID; + lane->submode = PHY_INTERFACE_MODE_NA; + lane->id = lane_id; +- lane->port = -1; + phy_set_drvdata(phy, lane); + } + diff --git a/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch b/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch new file mode 100644 index 0000000000..73ead1e16c --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch @@ -0,0 +1,1564 @@ +From 9d276da259cce20b2ed7a868b6e6a6a205f7bb04 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 23 Sep 2021 19:20:13 +0200 +Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel + implementation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Remove old RPC implementation and add a new native kernel implementation. + +The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted +Firmware which provides real implementation of PHY configuration. + +But older versions of ARM Trusted Firmware do not provide this PHY +configuration functionality, simply returning: operation not supported; or +worse, some versions provide the configuration functionality incorrectly. + +For example the firmware shipped in ESPRESSObin board has this older +version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe +functionality do not work with newer versions of Linux kernel. + +Due to the above reasons, the following commits were introduced into Linux, +to workaround these issues by ignoring -EOPNOTSUPP error code from +phy-mvebu-a3700-comphy driver function phy_power_on(): + +commit 45aefe3d2251 ("ata: ahci: mvebu: Make SATA PHY optional for Armada +3720") +commit 3241929b67d2 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for +Armada 3720") +commit b0c6ae0f8948 ("PCI: aardvark: Fix initialization with old Marvell's +Arm Trusted Firmware") + +Replace this RPC implementation with proper native kernel implementation, +which is independent on the firmware. Never return -EOPNOTSUPP for proper +arguments. + +This should solve multiple issues with real-world boards, where it is not +possible or really inconvenient to change the firmware. Let's eliminate +these issues. + +This implementation is ported directly from Armada 3720 comphy driver found +in newest version of ARM Trusted Firmware source code, but with various +fixes of register names, some added comments, some refactoring due to the +original code not conforming to kernel standards. Also PCIe mode poweroff +support was added here, and PHY reset support. These changes are also going +to be sent to ARM Trusted Firmware. + +Signed-off-by: Pali Rohár +Acked-by: Miquel Raynal +[ Pali did the porting from ATF. + I (Marek) then fixed some register names, some various other things, + added some comments and refactored the code to kernel standards. Also + fixed PHY poweroff and added PHY reset. ] +Signed-off-by: Marek Behún +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1351 ++++++++++++++++-- + 1 file changed, 1234 insertions(+), 117 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -5,12 +5,16 @@ + * Authors: + * Evan Wang + * Miquèl Raynal ++ * Pali Rohár ++ * Marek Behún + * + * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart. +- * SMC call initial support done by Grzegorz Jaszczyk. ++ * Comphy code from ARM Trusted Firmware ported by Pali Rohár ++ * and Marek Behún . + */ + +-#include ++#include ++#include + #include + #include + #include +@@ -18,103 +22,1147 @@ + #include + #include + #include ++#include + +-#define MVEBU_A3700_COMPHY_LANES 3 ++#define PLL_SET_DELAY_US 600 ++#define COMPHY_PLL_SLEEP 1000 ++#define COMPHY_PLL_TIMEOUT 150000 ++ ++/* Comphy lane2 indirect access register offset */ ++#define COMPHY_LANE2_INDIR_ADDR 0x0 ++#define COMPHY_LANE2_INDIR_DATA 0x4 ++ ++/* SATA and USB3 PHY offset compared to SATA PHY */ ++#define COMPHY_LANE2_REGS_BASE 0x200 ++ ++/* ++ * When accessing common PHY lane registers directly, we need to shift by 1, ++ * since the registers are 16-bit. ++ */ ++#define COMPHY_LANE_REG_DIRECT(reg) (((reg) & 0x7FF) << 1) ++ ++/* COMPHY registers */ ++#define COMPHY_POWER_PLL_CTRL 0x01 ++#define PU_IVREF_BIT BIT(15) ++#define PU_PLL_BIT BIT(14) ++#define PU_RX_BIT BIT(13) ++#define PU_TX_BIT BIT(12) ++#define PU_TX_INTP_BIT BIT(11) ++#define PU_DFE_BIT BIT(10) ++#define RESET_DTL_RX_BIT BIT(9) ++#define PLL_LOCK_BIT BIT(8) ++#define REF_FREF_SEL_MASK GENMASK(4, 0) ++#define REF_FREF_SEL_SERDES_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x1) ++#define REF_FREF_SEL_SERDES_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) ++#define REF_FREF_SEL_SERDES_50MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x4) ++#define REF_FREF_SEL_PCIE_USB3_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x2) ++#define REF_FREF_SEL_PCIE_USB3_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) ++#define COMPHY_MODE_MASK GENMASK(7, 5) ++#define COMPHY_MODE_SATA FIELD_PREP(COMPHY_MODE_MASK, 0x0) ++#define COMPHY_MODE_PCIE FIELD_PREP(COMPHY_MODE_MASK, 0x3) ++#define COMPHY_MODE_SERDES FIELD_PREP(COMPHY_MODE_MASK, 0x4) ++#define COMPHY_MODE_USB3 FIELD_PREP(COMPHY_MODE_MASK, 0x5) ++ ++#define COMPHY_KVCO_CAL_CTRL 0x02 ++#define USE_MAX_PLL_RATE_BIT BIT(12) ++#define SPEED_PLL_MASK GENMASK(7, 2) ++#define SPEED_PLL_VALUE_16 FIELD_PREP(SPEED_PLL_MASK, 0x10) ++ ++#define COMPHY_DIG_LOOPBACK_EN 0x23 ++#define SEL_DATA_WIDTH_MASK GENMASK(11, 10) ++#define DATA_WIDTH_10BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x0) ++#define DATA_WIDTH_20BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x1) ++#define DATA_WIDTH_40BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x2) ++#define PLL_READY_TX_BIT BIT(4) ++ ++#define COMPHY_SYNC_PATTERN 0x24 ++#define TXD_INVERT_BIT BIT(10) ++#define RXD_INVERT_BIT BIT(11) ++ ++#define COMPHY_SYNC_MASK_GEN 0x25 ++#define PHY_GEN_MAX_MASK GENMASK(11, 10) ++#define PHY_GEN_MAX_USB3_5G FIELD_PREP(PHY_GEN_MAX_MASK, 0x1) ++ ++#define COMPHY_ISOLATION_CTRL 0x26 ++#define PHY_ISOLATE_MODE BIT(15) ++ ++#define COMPHY_GEN2_SET2 0x3e ++#define GS2_TX_SSC_AMP_MASK GENMASK(15, 9) ++#define GS2_TX_SSC_AMP_4128 FIELD_PREP(GS2_TX_SSC_AMP_MASK, 0x20) ++#define GS2_VREG_RXTX_MAS_ISET_MASK GENMASK(8, 7) ++#define GS2_VREG_RXTX_MAS_ISET_60U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x0) ++#define GS2_VREG_RXTX_MAS_ISET_80U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x1) ++#define GS2_VREG_RXTX_MAS_ISET_100U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x2) ++#define GS2_VREG_RXTX_MAS_ISET_120U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x3) ++#define GS2_RSVD_6_0_MASK GENMASK(6, 0) ++ ++#define COMPHY_GEN3_SET2 0x3f ++ ++#define COMPHY_IDLE_SYNC_EN 0x48 ++#define IDLE_SYNC_EN BIT(12) ++ ++#define COMPHY_MISC_CTRL0 0x4F ++#define CLK100M_125M_EN BIT(4) ++#define TXDCLK_2X_SEL BIT(6) ++#define CLK500M_EN BIT(7) ++#define PHY_REF_CLK_SEL BIT(10) ++ ++#define COMPHY_SFT_RESET 0x52 ++#define SFT_RST BIT(9) ++#define SFT_RST_NO_REG BIT(10) ++ ++#define COMPHY_MISC_CTRL1 0x73 ++#define SEL_BITS_PCIE_FORCE BIT(15) ++ ++#define COMPHY_GEN2_SET3 0x112 ++#define GS3_FFE_CAP_SEL_MASK GENMASK(3, 0) ++#define GS3_FFE_CAP_SEL_VALUE FIELD_PREP(GS3_FFE_CAP_SEL_MASK, 0xF) ++ ++/* PIPE registers */ ++#define COMPHY_PIPE_LANE_CFG0 0x180 ++#define PRD_TXDEEMPH0_MASK BIT(0) ++#define PRD_TXMARGIN_MASK GENMASK(3, 1) ++#define PRD_TXSWING_MASK BIT(4) ++#define CFG_TX_ALIGN_POS_MASK GENMASK(8, 5) ++ ++#define COMPHY_PIPE_LANE_CFG1 0x181 ++#define PRD_TXDEEMPH1_MASK BIT(15) ++#define USE_MAX_PLL_RATE_EN BIT(9) ++#define TX_DET_RX_MODE BIT(6) ++#define GEN2_TX_DATA_DLY_MASK GENMASK(4, 3) ++#define GEN2_TX_DATA_DLY_DEFT FIELD_PREP(GEN2_TX_DATA_DLY_MASK, 2) ++#define TX_ELEC_IDLE_MODE_EN BIT(0) ++ ++#define COMPHY_PIPE_LANE_STAT1 0x183 ++#define TXDCLK_PCLK_EN BIT(0) ++ ++#define COMPHY_PIPE_LANE_CFG4 0x188 ++#define SPREAD_SPECTRUM_CLK_EN BIT(7) ++ ++#define COMPHY_PIPE_RST_CLK_CTRL 0x1C1 ++#define PIPE_SOFT_RESET BIT(0) ++#define PIPE_REG_RESET BIT(1) ++#define MODE_CORE_CLK_FREQ_SEL BIT(9) ++#define MODE_PIPE_WIDTH_32 BIT(3) ++#define MODE_REFDIV_MASK GENMASK(5, 4) ++#define MODE_REFDIV_BY_4 FIELD_PREP(MODE_REFDIV_MASK, 0x2) ++ ++#define COMPHY_PIPE_TEST_MODE_CTRL 0x1C2 ++#define MODE_MARGIN_OVERRIDE BIT(2) ++ ++#define COMPHY_PIPE_CLK_SRC_LO 0x1C3 ++#define MODE_CLK_SRC BIT(0) ++#define BUNDLE_PERIOD_SEL BIT(1) ++#define BUNDLE_PERIOD_SCALE_MASK GENMASK(3, 2) ++#define BUNDLE_SAMPLE_CTRL BIT(4) ++#define PLL_READY_DLY_MASK GENMASK(7, 5) ++#define CFG_SEL_20B BIT(15) ++ ++#define COMPHY_PIPE_PWR_MGM_TIM1 0x1D0 ++#define CFG_PM_OSCCLK_WAIT_MASK GENMASK(15, 12) ++#define CFG_PM_RXDEN_WAIT_MASK GENMASK(11, 8) ++#define CFG_PM_RXDEN_WAIT_1_UNIT FIELD_PREP(CFG_PM_RXDEN_WAIT_MASK, 0x1) ++#define CFG_PM_RXDLOZ_WAIT_MASK GENMASK(7, 0) ++#define CFG_PM_RXDLOZ_WAIT_7_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0x7) ++#define CFG_PM_RXDLOZ_WAIT_12_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0xC) ++ ++/* ++ * This register is not from PHY lane register space. It only exists in the ++ * indirect register space, before the actual PHY lane 2 registers. So the ++ * offset is absolute, not relative to COMPHY_LANE2_REGS_BASE. ++ * It is used only for SATA PHY initialization. ++ */ ++#define COMPHY_RESERVED_REG 0x0E ++#define PHYCTRL_FRM_PIN_BIT BIT(13) + +-/* COMPHY Fast SMC function identifiers */ +-#define COMPHY_SIP_POWER_ON 0x82000001 +-#define COMPHY_SIP_POWER_OFF 0x82000002 +-#define COMPHY_SIP_PLL_LOCK 0x82000003 +- +-#define COMPHY_FW_MODE_SATA 0x1 +-#define COMPHY_FW_MODE_SGMII 0x2 +-#define COMPHY_FW_MODE_2500BASEX 0x3 +-#define COMPHY_FW_MODE_USB3H 0x4 +-#define COMPHY_FW_MODE_USB3D 0x5 +-#define COMPHY_FW_MODE_PCIE 0x6 +-#define COMPHY_FW_MODE_USB3 0xa +- +-#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ +-#define COMPHY_FW_SPEED_2_5G 1 +-#define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ +-#define COMPHY_FW_SPEED_5G 3 +-#define COMPHY_FW_SPEED_MAX 0x3F +- +-#define COMPHY_FW_MODE(mode) ((mode) << 12) +-#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ +- ((idx) << 8) | \ +- ((speed) << 2)) +-#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ +- ((width) << 18)) ++/* South Bridge PHY Configuration Registers */ ++#define COMPHY_PHY_REG(lane, reg) (((1 - (lane)) * 0x28) + ((reg) & 0x3f)) ++ ++/* ++ * lane0: USB3/GbE1 PHY Configuration 1 ++ * lane1: PCIe/GbE0 PHY Configuration 1 ++ * (used only by SGMII code) ++ */ ++#define COMPHY_PHY_CFG1 0x0 ++#define PIN_PU_IVREF_BIT BIT(1) ++#define PIN_RESET_CORE_BIT BIT(11) ++#define PIN_RESET_COMPHY_BIT BIT(12) ++#define PIN_PU_PLL_BIT BIT(16) ++#define PIN_PU_RX_BIT BIT(17) ++#define PIN_PU_TX_BIT BIT(18) ++#define PIN_TX_IDLE_BIT BIT(19) ++#define GEN_RX_SEL_MASK GENMASK(25, 22) ++#define GEN_RX_SEL_VALUE(val) FIELD_PREP(GEN_RX_SEL_MASK, (val)) ++#define GEN_TX_SEL_MASK GENMASK(29, 26) ++#define GEN_TX_SEL_VALUE(val) FIELD_PREP(GEN_TX_SEL_MASK, (val)) ++#define SERDES_SPEED_1_25_G 0x6 ++#define SERDES_SPEED_3_125_G 0x8 ++#define PHY_RX_INIT_BIT BIT(30) ++ ++/* ++ * lane0: USB3/GbE1 PHY Status 1 ++ * lane1: PCIe/GbE0 PHY Status 1 ++ * (used only by SGMII code) ++ */ ++#define COMPHY_PHY_STAT1 0x18 ++#define PHY_RX_INIT_DONE_BIT BIT(0) ++#define PHY_PLL_READY_RX_BIT BIT(2) ++#define PHY_PLL_READY_TX_BIT BIT(3) ++ ++/* PHY Selector */ ++#define COMPHY_SELECTOR_PHY_REG 0xFC ++/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIe */ ++#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) ++/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */ ++#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) ++/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */ ++#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) + + struct mvebu_a3700_comphy_conf { + unsigned int lane; + enum phy_mode mode; + int submode; +- u32 fw_mode; + }; + +-#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ ++#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode) \ + { \ + .lane = _lane, \ + .mode = _mode, \ + .submode = _smode, \ +- .fw_mode = _fw, \ + } + +-#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) ++#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA) + +-#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) ++#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode) + + static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { + /* lane 0 */ +- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, +- COMPHY_FW_MODE_USB3H), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, +- COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, +- COMPHY_FW_MODE_2500BASEX), ++ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_1000BASEX), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX), + /* lane 1 */ +- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, +- COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, +- COMPHY_FW_MODE_2500BASEX), ++ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_1000BASEX), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX), + /* lane 2 */ +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, +- COMPHY_FW_MODE_USB3H), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS), ++}; ++ ++struct mvebu_a3700_comphy_priv { ++ void __iomem *comphy_regs; ++ void __iomem *lane0_phy_regs; /* USB3 and GbE1 */ ++ void __iomem *lane1_phy_regs; /* PCIe and GbE0 */ ++ void __iomem *lane2_phy_indirect; /* SATA and USB3 */ ++ spinlock_t lock; /* for PHY selector access */ ++ bool xtal_is_40m; + }; + + struct mvebu_a3700_comphy_lane { ++ struct mvebu_a3700_comphy_priv *priv; + struct device *dev; + unsigned int id; + enum phy_mode mode; + int submode; ++ bool invert_tx; ++ bool invert_rx; ++ bool needs_reset; ++}; ++ ++struct gbe_phy_init_data_fix { ++ u16 addr; ++ u16 value; ++}; ++ ++/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */ ++static struct gbe_phy_init_data_fix gbe_phy_init_fix[] = { ++ { 0x005, 0x07CC }, { 0x015, 0x0000 }, { 0x01B, 0x0000 }, ++ { 0x01D, 0x0000 }, { 0x01E, 0x0000 }, { 0x01F, 0x0000 }, ++ { 0x020, 0x0000 }, { 0x021, 0x0030 }, { 0x026, 0x0888 }, ++ { 0x04D, 0x0152 }, { 0x04F, 0xA020 }, { 0x050, 0x07CC }, ++ { 0x053, 0xE9CA }, { 0x055, 0xBD97 }, { 0x071, 0x3015 }, ++ { 0x076, 0x03AA }, { 0x07C, 0x0FDF }, { 0x0C2, 0x3030 }, ++ { 0x0C3, 0x8000 }, { 0x0E2, 0x5550 }, { 0x0E3, 0x12A4 }, ++ { 0x0E4, 0x7D00 }, { 0x0E6, 0x0C83 }, { 0x101, 0xFCC0 }, ++ { 0x104, 0x0C10 } + }; + +-static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, +- unsigned long mode) ++/* 40M1G25 mode init data */ ++static u16 gbe_phy_init[512] = { ++ /* 0 1 2 3 4 5 6 7 */ ++ /*-----------------------------------------------------------*/ ++ /* 8 9 A B C D E F */ ++ 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */ ++ 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */ ++ 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */ ++ 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */ ++ 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */ ++ 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */ ++ 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ ++ 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */ ++ 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */ ++ 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */ ++ 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */ ++ 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */ ++ 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */ ++ 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */ ++ 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */ ++ 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */ ++ 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */ ++ 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */ ++ 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */ ++ 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */ ++ 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */ ++ 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */ ++ 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */ ++ 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */ ++ 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */ ++ 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */ ++ 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */ ++ 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */ ++ 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */ ++ 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */ ++ 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */ ++ 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */ ++ 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */ ++ 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ ++}; ++ ++static inline void comphy_reg_set(void __iomem *addr, u32 data, u32 mask) + { +- struct arm_smccc_res res; +- s32 ret; ++ u32 val; + +- arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); +- ret = res.a0; ++ val = readl(addr); ++ val = (val & ~mask) | (data & mask); ++ writel(val, addr); ++} + +- switch (ret) { +- case SMCCC_RET_SUCCESS: +- return 0; +- case SMCCC_RET_NOT_SUPPORTED: +- return -EOPNOTSUPP; ++static inline void comphy_reg_set16(void __iomem *addr, u16 data, u16 mask) ++{ ++ u16 val; ++ ++ val = readw(addr); ++ val = (val & ~mask) | (data & mask); ++ writew(val, addr); ++} ++ ++/* Used for accessing lane 2 registers (SATA/USB3 PHY) */ ++static void comphy_set_indirect(struct mvebu_a3700_comphy_priv *priv, ++ u32 offset, u16 data, u16 mask) ++{ ++ writel(offset, ++ priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_ADDR); ++ comphy_reg_set(priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_DATA, ++ data, mask); ++} ++ ++static void comphy_lane_reg_set(struct mvebu_a3700_comphy_lane *lane, ++ u16 reg, u16 data, u16 mask) ++{ ++ if (lane->id == 2) { ++ /* lane 2 PHY registers are accessed indirectly */ ++ comphy_set_indirect(lane->priv, ++ reg + COMPHY_LANE2_REGS_BASE, ++ data, mask); ++ } else { ++ void __iomem *base = lane->id == 1 ? ++ lane->priv->lane1_phy_regs : ++ lane->priv->lane0_phy_regs; ++ ++ comphy_reg_set16(base + COMPHY_LANE_REG_DIRECT(reg), ++ data, mask); ++ } ++} ++ ++static int comphy_lane_reg_poll(struct mvebu_a3700_comphy_lane *lane, ++ u16 reg, u16 bits, ++ ulong sleep_us, ulong timeout_us) ++{ ++ int ret; ++ ++ if (lane->id == 2) { ++ u32 data; ++ ++ /* lane 2 PHY registers are accessed indirectly */ ++ writel(reg + COMPHY_LANE2_REGS_BASE, ++ lane->priv->lane2_phy_indirect + ++ COMPHY_LANE2_INDIR_ADDR); ++ ++ ret = readl_poll_timeout(lane->priv->lane2_phy_indirect + ++ COMPHY_LANE2_INDIR_DATA, ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++ } else { ++ void __iomem *base = lane->id == 1 ? ++ lane->priv->lane1_phy_regs : ++ lane->priv->lane0_phy_regs; ++ u16 data; ++ ++ ret = readw_poll_timeout(base + COMPHY_LANE_REG_DIRECT(reg), ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++ } ++ ++ return ret; ++} ++ ++static void comphy_periph_reg_set(struct mvebu_a3700_comphy_lane *lane, ++ u8 reg, u32 data, u32 mask) ++{ ++ comphy_reg_set(lane->priv->comphy_regs + COMPHY_PHY_REG(lane->id, reg), ++ data, mask); ++} ++ ++static int comphy_periph_reg_poll(struct mvebu_a3700_comphy_lane *lane, ++ u8 reg, u32 bits, ++ ulong sleep_us, ulong timeout_us) ++{ ++ u32 data; ++ ++ return readl_poll_timeout(lane->priv->comphy_regs + ++ COMPHY_PHY_REG(lane->id, reg), ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++} ++ ++/* PHY selector configures with corresponding modes */ ++static int ++mvebu_a3700_comphy_set_phy_selector(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 old, new, clr = 0, set = 0; ++ unsigned long flags; ++ ++ switch (lane->mode) { ++ case PHY_MODE_SATA: ++ /* SATA must be in Lane2 */ ++ if (lane->id == 2) ++ clr = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_ETHERNET: ++ if (lane->id == 0) ++ clr = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; ++ else if (lane->id == 1) ++ clr = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_USB_HOST_SS: ++ if (lane->id == 2) ++ set = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; ++ else if (lane->id == 0) ++ set = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_PCIE: ++ /* PCIE must be in Lane1 */ ++ if (lane->id == 1) ++ set = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ default: ++ goto error; ++ } ++ ++ spin_lock_irqsave(&lane->priv->lock, flags); ++ ++ old = readl(lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); ++ new = (old & ~clr) | set; ++ writel(new, lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); ++ ++ spin_unlock_irqrestore(&lane->priv->lock, flags); ++ ++ dev_dbg(lane->dev, ++ "COMPHY[%d] mode[%d] changed PHY selector 0x%08x -> 0x%08x\n", ++ lane->id, lane->mode, old, new); ++ ++ return 0; ++error: ++ dev_err(lane->dev, "COMPHY[%d] mode[%d] is invalid\n", lane->id, ++ lane->mode); ++ return -EINVAL; ++} ++ ++static int ++mvebu_a3700_comphy_sata_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, ref_clk; ++ int ret; ++ ++ /* Configure phy selector for SATA */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* Clear phy isolation mode to make it work in normal mode */ ++ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, ++ 0x0, PHY_ISOLATE_MODE); ++ ++ /* 0. Check the Polarity invert bits */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* 1. Select 40-bit data width */ ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, ++ DATA_WIDTH_40BIT, SEL_DATA_WIDTH_MASK); ++ ++ /* 2. Select reference clock(25M) and PHY mode (SATA) */ ++ if (lane->priv->xtal_is_40m) ++ ref_clk = REF_FREF_SEL_SERDES_40MHZ; ++ else ++ ref_clk = REF_FREF_SEL_SERDES_25MHZ; ++ ++ data = ref_clk | COMPHY_MODE_SATA; ++ mask = REF_FREF_SEL_MASK | COMPHY_MODE_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* 3. Use maximum PLL rate (no power save) */ ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, ++ USE_MAX_PLL_RATE_BIT, USE_MAX_PLL_RATE_BIT); ++ ++ /* 4. Reset reserved bit */ ++ comphy_set_indirect(lane->priv, COMPHY_RESERVED_REG, ++ 0x0, PHYCTRL_FRM_PIN_BIT); ++ ++ /* 5. Set vendor-specific configuration (It is done in sata driver) */ ++ /* XXX: in U-Boot below sequence was executed in this place, in Linux ++ * not. Now it is done only in U-Boot before this comphy ++ * initialization - tests shows that it works ok, but in case of any ++ * future problem it is left for reference. ++ * reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff); ++ * reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6)); ++ */ ++ ++ /* Wait for > 55 us to allow PLL be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ /* Polling status */ ++ ret = comphy_lane_reg_poll(lane, COMPHY_DIG_LOOPBACK_EN, ++ PLL_READY_TX_BIT, COMPHY_PLL_SLEEP, ++ COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock SATA PLL\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static void comphy_gbe_phy_init(struct mvebu_a3700_comphy_lane *lane, ++ bool is_1gbps) ++{ ++ int addr, fix_idx; ++ u16 val; ++ ++ fix_idx = 0; ++ for (addr = 0; addr < 512; addr++) { ++ /* ++ * All PHY register values are defined in full for 3.125Gbps ++ * SERDES speed. The values required for 1.25 Gbps are almost ++ * the same and only few registers should be "fixed" in ++ * comparison to 3.125 Gbps values. These register values are ++ * stored in "gbe_phy_init_fix" array. ++ */ ++ if (!is_1gbps && gbe_phy_init_fix[fix_idx].addr == addr) { ++ /* Use new value */ ++ val = gbe_phy_init_fix[fix_idx].value; ++ if (fix_idx < ARRAY_SIZE(gbe_phy_init_fix)) ++ fix_idx++; ++ } else { ++ val = gbe_phy_init[addr]; ++ } ++ ++ comphy_lane_reg_set(lane, addr, val, 0xFFFF); ++ } ++} ++ ++static int ++mvebu_a3700_comphy_ethernet_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, speed_sel; ++ int ret; ++ ++ /* Set selector */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* ++ * 1. Reset PHY by setting PHY input port PIN_RESET=1. ++ * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep ++ * PHY TXP/TXN output to idle state during PHY initialization ++ * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0. ++ */ ++ data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT; ++ mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT | ++ PIN_PU_TX_BIT | PHY_RX_INIT_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* 4. Release reset to the PHY by setting PIN_RESET=0. */ ++ data = 0x0; ++ mask = PIN_RESET_COMPHY_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY ++ * bit rate ++ */ ++ switch (lane->submode) { ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_1000BASEX: ++ /* SGMII 1G, SerDes speed 1.25G */ ++ speed_sel = SERDES_SPEED_1_25_G; ++ break; ++ case PHY_INTERFACE_MODE_2500BASEX: ++ /* 2500Base-X, SerDes speed 3.125G */ ++ speed_sel = SERDES_SPEED_3_125_G; ++ break; + default: ++ /* Other rates are not supported */ ++ dev_err(lane->dev, ++ "unsupported phy speed %d on comphy lane%d\n", ++ lane->submode, lane->id); + return -EINVAL; + } ++ data = GEN_RX_SEL_VALUE(speed_sel) | GEN_TX_SEL_VALUE(speed_sel); ++ mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 6. Wait 10mS for bandgap and reference clocks to stabilize; then ++ * start SW programming. ++ */ ++ mdelay(10); ++ ++ /* 7. Program COMPHY register PHY_MODE */ ++ data = COMPHY_MODE_SERDES; ++ mask = COMPHY_MODE_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* ++ * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK ++ * source ++ */ ++ data = 0x0; ++ mask = PHY_REF_CLK_SEL; ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); ++ ++ /* ++ * 9. Set correct reference clock frequency in COMPHY register ++ * REF_FREF_SEL. ++ */ ++ if (lane->priv->xtal_is_40m) ++ data = REF_FREF_SEL_SERDES_50MHZ; ++ else ++ data = REF_FREF_SEL_SERDES_25MHZ; ++ ++ mask = REF_FREF_SEL_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* 10. Program COMPHY register PHY_GEN_MAX[1:0] ++ * This step is mentioned in the flow received from verification team. ++ * However the PHY_GEN_MAX value is only meaningful for other interfaces ++ * (not SERDES). For instance, it selects SATA speed 1.5/3/6 Gbps or ++ * PCIe speed 2.5/5 Gbps ++ */ ++ ++ /* ++ * 11. Program COMPHY register SEL_BITS to set correct parallel data ++ * bus width ++ */ ++ data = DATA_WIDTH_10BIT; ++ mask = SEL_DATA_WIDTH_MASK; ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, data, mask); ++ ++ /* ++ * 12. As long as DFE function needs to be enabled in any mode, ++ * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F ++ * for real chip during COMPHY power on. ++ * The step 14 exists (and empty) in the original initialization flow ++ * obtained from the verification team. According to the functional ++ * specification DFE_UPDATE_EN already has the default value 0x3F ++ */ ++ ++ /* ++ * 13. Program COMPHY GEN registers. ++ * These registers should be programmed based on the lab testing result ++ * to achieve optimal performance. Please contact the CEA group to get ++ * the related GEN table during real chip bring-up. We only required to ++ * run though the entire registers programming flow defined by ++ * "comphy_gbe_phy_init" when the REF clock is 40 MHz. For REF clock ++ * 25 MHz the default values stored in PHY registers are OK. ++ */ ++ dev_dbg(lane->dev, "Running C-DPI phy init %s mode\n", ++ lane->submode == PHY_INTERFACE_MODE_2500BASEX ? "2G5" : "1G"); ++ if (lane->priv->xtal_is_40m) ++ comphy_gbe_phy_init(lane, ++ lane->submode != PHY_INTERFACE_MODE_2500BASEX); ++ ++ /* ++ * 14. [Simulation Only] should not be used for real chip. ++ * By pass power up calibration by programming EXT_FORCE_CAL_DONE ++ * (R02h[9]) to 1 to shorten COMPHY simulation time. ++ */ ++ ++ /* ++ * 15. [Simulation Only: should not be used for real chip] ++ * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training ++ * simulation time. ++ */ ++ ++ /* ++ * 16. Check the PHY Polarity invert bit ++ */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* ++ * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to ++ * start PHY power up sequence. All the PHY register programming should ++ * be done before PIN_PU_PLL=1. There should be no register programming ++ * for normal PHY operation from this point. ++ */ ++ data = PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; ++ mask = data; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 18. Wait for PHY power up sequence to finish by checking output ports ++ * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1. ++ */ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_PLL_READY_TX_BIT | ++ PHY_PLL_READY_RX_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", ++ lane->id); ++ return ret; ++ } ++ ++ /* ++ * 19. Set COMPHY input port PIN_TX_IDLE=0 ++ */ ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, 0x0, PIN_TX_IDLE_BIT); ++ ++ /* ++ * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To ++ * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the ++ * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to ++ * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please ++ * refer to RX initialization part for details. ++ */ ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, ++ PHY_RX_INIT_BIT, PHY_RX_INIT_BIT); ++ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_PLL_READY_TX_BIT | ++ PHY_PLL_READY_RX_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", ++ lane->id); ++ return ret; ++ } ++ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_RX_INIT_DONE_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to init RX of SERDES PHY %d\n", ++ lane->id); ++ return ret; ++ } ++ ++ return 0; + } + +-static int mvebu_a3700_comphy_get_fw_mode(int lane, ++static int ++mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, cfg, ref_clk; ++ int ret; ++ ++ /* Set phy seclector */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* ++ * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The ++ * register belong to UTMI module, so it is set in UTMI phy driver. ++ */ ++ ++ /* ++ * 1. Set PRD_TXDEEMPH (3.5db de-emph) ++ */ ++ data = PRD_TXDEEMPH0_MASK; ++ mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK | ++ CFG_TX_ALIGN_POS_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG0, data, mask); ++ ++ /* ++ * 2. Set BIT0: enable transmitter in high impedance mode ++ * Set BIT[3:4]: delay 2 clock cycles for HiZ off latency ++ * Set BIT6: Tx detect Rx at HiZ mode ++ * Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db ++ * together with bit 0 of COMPHY_PIPE_LANE_CFG0 register ++ */ ++ data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN; ++ mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK | ++ TX_ELEC_IDLE_MODE_EN; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, data, mask); ++ ++ /* ++ * 3. Set Spread Spectrum Clock Enabled ++ */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG4, ++ SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN); ++ ++ /* ++ * 4. Set Override Margining Controls From the MAC: ++ * Use margining signals from lane configuration ++ */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_TEST_MODE_CTRL, ++ MODE_MARGIN_OVERRIDE, 0xFFFF); ++ ++ /* ++ * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles ++ * set Mode Clock Source = PCLK is generated from REFCLK ++ */ ++ data = 0x0; ++ mask = MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE_MASK | ++ BUNDLE_SAMPLE_CTRL | PLL_READY_DLY_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, data, mask); ++ ++ /* ++ * 6. Set G2 Spread Spectrum Clock Amplitude at 4K ++ */ ++ comphy_lane_reg_set(lane, COMPHY_GEN2_SET2, ++ GS2_TX_SSC_AMP_4128, GS2_TX_SSC_AMP_MASK); ++ ++ /* ++ * 7. Unset G3 Spread Spectrum Clock Amplitude ++ * set G3 TX and RX Register Master Current Select ++ */ ++ data = GS2_VREG_RXTX_MAS_ISET_60U; ++ mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK | ++ GS2_RSVD_6_0_MASK; ++ comphy_lane_reg_set(lane, COMPHY_GEN3_SET2, data, mask); ++ ++ /* ++ * 8. Check crystal jumper setting and program the Power and PLL Control ++ * accordingly Change RX wait ++ */ ++ if (lane->priv->xtal_is_40m) { ++ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; ++ cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT; ++ } else { ++ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; ++ cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT; ++ } ++ ++ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_USB3 | ref_clk; ++ mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | COMPHY_MODE_MASK | ++ REF_FREF_SEL_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg; ++ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | ++ CFG_PM_RXDLOZ_WAIT_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); ++ ++ /* ++ * 9. Enable idle sync ++ */ ++ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, ++ IDLE_SYNC_EN, IDLE_SYNC_EN); ++ ++ /* ++ * 10. Enable the output of 500M clock ++ */ ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, CLK500M_EN, CLK500M_EN); ++ ++ /* ++ * 11. Set 20-bit data width ++ */ ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, ++ DATA_WIDTH_20BIT, 0xFFFF); ++ ++ /* ++ * 12. Override Speed_PLL value and use MAC PLL ++ */ ++ data = SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, data, mask); ++ ++ /* ++ * 13. Check the Polarity invert bit ++ */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* ++ * 14. Set max speed generation to USB3.0 5Gbps ++ */ ++ comphy_lane_reg_set(lane, COMPHY_SYNC_MASK_GEN, ++ PHY_GEN_MAX_USB3_5G, PHY_GEN_MAX_MASK); ++ ++ /* ++ * 15. Set capacitor value for FFE gain peaking to 0xF ++ */ ++ comphy_lane_reg_set(lane, COMPHY_GEN2_SET3, ++ GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK); ++ ++ /* ++ * 16. Release SW reset ++ */ ++ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Wait for > 55 us to allow PCLK be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock USB3 PLL\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int ++mvebu_a3700_comphy_pcie_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, ref_clk; ++ int ret; ++ ++ /* Configure phy selector for PCIe */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* 1. Enable max PLL. */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, ++ USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN); ++ ++ /* 2. Select 20 bit SERDES interface. */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, ++ CFG_SEL_20B, CFG_SEL_20B); ++ ++ /* 3. Force to use reg setting for PCIe mode */ ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL1, ++ SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE); ++ ++ /* 4. Change RX wait */ ++ data = CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT; ++ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | ++ CFG_PM_RXDLOZ_WAIT_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); ++ ++ /* 5. Enable idle sync */ ++ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, ++ IDLE_SYNC_EN, IDLE_SYNC_EN); ++ ++ /* 6. Enable the output of 100M/125M/500M clock */ ++ data = CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN; ++ mask = data; ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); ++ ++ /* ++ * 7. Enable TX, PCIE global register, 0xd0074814, it is done in ++ * PCI-E driver ++ */ ++ ++ /* ++ * 8. Check crystal jumper setting and program the Power and PLL ++ * Control accordingly ++ */ ++ ++ if (lane->priv->xtal_is_40m) ++ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; ++ else ++ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; ++ ++ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_PCIE | ref_clk; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* 9. Override Speed_PLL value and use MAC PLL */ ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, ++ SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, ++ 0xFFFF); ++ ++ /* 10. Check the Polarity invert bit */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* 11. Release SW reset */ ++ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32; ++ mask = data | PIPE_SOFT_RESET | MODE_REFDIV_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Wait for > 55 us to allow PCLK be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock PCIE PLL\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static void ++mvebu_a3700_comphy_usb3_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ /* ++ * Currently the USB3 MAC sets the USB3 PHY to low state, so we do not ++ * need to power off USB3 PHY again. ++ */ ++} ++ ++static void ++mvebu_a3700_comphy_sata_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ /* Set phy isolation mode */ ++ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, ++ PHY_ISOLATE_MODE, PHY_ISOLATE_MODE); ++ ++ /* Power off PLL, Tx, Rx */ ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, ++ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); ++} ++ ++static void ++mvebu_a3700_comphy_ethernet_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data; ++ ++ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | PIN_PU_IVREF_BIT | ++ PHY_RX_INIT_BIT; ++ mask = data; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++} ++ ++static void ++mvebu_a3700_comphy_pcie_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ /* Power off PLL, Tx, Rx */ ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, ++ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); ++} ++ ++static int mvebu_a3700_comphy_reset(struct phy *phy) ++{ ++ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); ++ u16 mask, data; ++ ++ dev_dbg(lane->dev, "resetting lane %d\n", lane->id); ++ ++ /* COMPHY reset for internal logic */ ++ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, ++ SFT_RST_NO_REG, SFT_RST_NO_REG); ++ ++ /* COMPHY register reset (cleared automatically) */ ++ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST); ++ ++ /* PIPE soft and register reset */ ++ data = PIPE_SOFT_RESET | PIPE_REG_RESET; ++ mask = data; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Release PIPE register reset */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, ++ 0x0, PIPE_REG_RESET); ++ ++ /* Reset SB configuration register (only for lanes 0 and 1) */ ++ if (lane->id == 0 || lane->id == 1) { ++ u32 mask, data; ++ ++ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | ++ PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; ++ mask = data | PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ } ++ ++ return 0; ++} ++ ++static bool mvebu_a3700_comphy_check_mode(int lane, + enum phy_mode mode, + int submode) + { +@@ -122,7 +1170,7 @@ static int mvebu_a3700_comphy_get_fw_mod + + /* Unused PHY mux value is 0x0 */ + if (mode == PHY_MODE_INVALID) +- return -EINVAL; ++ return false; + + for (i = 0; i < n; i++) { + if (mvebu_a3700_comphy_modes[i].lane == lane && +@@ -132,27 +1180,30 @@ static int mvebu_a3700_comphy_get_fw_mod + } + + if (i == n) +- return -EINVAL; ++ return false; + +- return mvebu_a3700_comphy_modes[i].fw_mode; ++ return true; + } + + static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, + int submode) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- int fw_mode; +- +- if (submode == PHY_INTERFACE_MODE_1000BASEX) +- submode = PHY_INTERFACE_MODE_SGMII; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, +- submode); +- if (fw_mode < 0) { ++ if (!mvebu_a3700_comphy_check_mode(lane->id, mode, submode)) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +- return fw_mode; ++ return -EINVAL; + } + ++ /* Mode cannot be changed while the PHY is powered on */ ++ if (phy->power_count && ++ (lane->mode != mode || lane->submode != submode)) ++ return -EBUSY; ++ ++ /* If changing mode, ensure reset is called */ ++ if (lane->mode != PHY_MODE_INVALID && lane->mode != mode) ++ lane->needs_reset = true; ++ + /* Just remember the mode, ->power_on() will do the real setup */ + lane->mode = mode; + lane->submode = submode; +@@ -163,76 +1214,68 @@ static int mvebu_a3700_comphy_set_mode(s + static int mvebu_a3700_comphy_power_on(struct phy *phy) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- u32 fw_param; +- int fw_mode; +- int fw_port; + int ret; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, +- lane->mode, lane->submode); +- if (fw_mode < 0) { ++ if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode, ++ lane->submode)) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +- return fw_mode; ++ return -EINVAL; ++ } ++ ++ if (lane->needs_reset) { ++ ret = mvebu_a3700_comphy_reset(phy); ++ if (ret) ++ return ret; ++ ++ lane->needs_reset = false; + } + + switch (lane->mode) { + case PHY_MODE_USB_HOST_SS: + dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); +- fw_param = COMPHY_FW_MODE(fw_mode); +- break; ++ return mvebu_a3700_comphy_usb3_power_on(lane); + case PHY_MODE_SATA: + dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id); +- fw_param = COMPHY_FW_MODE(fw_mode); +- break; ++ return mvebu_a3700_comphy_sata_power_on(lane); + case PHY_MODE_ETHERNET: +- fw_port = (lane->id == 0) ? 1 : 0; +- switch (lane->submode) { +- case PHY_INTERFACE_MODE_SGMII: +- dev_dbg(lane->dev, "set lane %d to SGMII mode\n", +- lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, fw_port, +- COMPHY_FW_SPEED_1_25G); +- break; +- case PHY_INTERFACE_MODE_2500BASEX: +- dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", +- lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, fw_port, +- COMPHY_FW_SPEED_3_125G); +- break; +- default: +- dev_err(lane->dev, "unsupported PHY submode (%d)\n", +- lane->submode); +- return -ENOTSUPP; +- } +- break; ++ dev_dbg(lane->dev, "set lane %d to Ethernet mode\n", lane->id); ++ return mvebu_a3700_comphy_ethernet_power_on(lane); + case PHY_MODE_PCIE: + dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); +- fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, +- phy->attrs.bus_width); +- break; ++ return mvebu_a3700_comphy_pcie_power_on(lane); + default: + dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode); +- return -ENOTSUPP; ++ return -EOPNOTSUPP; + } +- +- ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param); +- if (ret == -EOPNOTSUPP) +- dev_err(lane->dev, +- "unsupported SMC call, try updating your firmware\n"); +- +- return ret; + } + + static int mvebu_a3700_comphy_power_off(struct phy *phy) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); + +- return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0); ++ switch (lane->mode) { ++ case PHY_MODE_USB_HOST_SS: ++ mvebu_a3700_comphy_usb3_power_off(lane); ++ return 0; ++ case PHY_MODE_SATA: ++ mvebu_a3700_comphy_sata_power_off(lane); ++ return 0; ++ case PHY_MODE_ETHERNET: ++ mvebu_a3700_comphy_ethernet_power_off(lane); ++ return 0; ++ case PHY_MODE_PCIE: ++ mvebu_a3700_comphy_pcie_power_off(lane); ++ return 0; ++ default: ++ dev_err(lane->dev, "invalid COMPHY mode\n"); ++ return -EINVAL; ++ } + } + + static const struct phy_ops mvebu_a3700_comphy_ops = { + .power_on = mvebu_a3700_comphy_power_on, + .power_off = mvebu_a3700_comphy_power_off, ++ .reset = mvebu_a3700_comphy_reset, + .set_mode = mvebu_a3700_comphy_set_mode, + .owner = THIS_MODULE, + }; +@@ -256,13 +1299,75 @@ static struct phy *mvebu_a3700_comphy_xl + return ERR_PTR(-EINVAL); + } + ++ lane->invert_tx = args->args[1] & BIT(0); ++ lane->invert_rx = args->args[1] & BIT(1); ++ + return phy; + } + + static int mvebu_a3700_comphy_probe(struct platform_device *pdev) + { ++ struct mvebu_a3700_comphy_priv *priv; + struct phy_provider *provider; + struct device_node *child; ++ struct resource *res; ++ struct clk *clk; ++ int ret; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ spin_lock_init(&priv->lock); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "comphy"); ++ priv->comphy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->comphy_regs)) ++ return PTR_ERR(priv->comphy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane1_pcie_gbe"); ++ priv->lane1_phy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane1_phy_regs)) ++ return PTR_ERR(priv->lane1_phy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane0_usb3_gbe"); ++ priv->lane0_phy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane0_phy_regs)) ++ return PTR_ERR(priv->lane0_phy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane2_sata_usb3"); ++ priv->lane2_phy_indirect = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane2_phy_indirect)) ++ return PTR_ERR(priv->lane2_phy_indirect); ++ ++ /* ++ * Driver needs to know if reference xtal clock is 40MHz or 25MHz. ++ * Old DT bindings do not have xtal clk present. So do not fail here ++ * and expects that default 25MHz reference clock is used. ++ */ ++ clk = clk_get(&pdev->dev, "xtal"); ++ if (IS_ERR(clk)) { ++ if (PTR_ERR(clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ dev_warn(&pdev->dev, "missing 'xtal' clk (%ld)\n", ++ PTR_ERR(clk)); ++ } else { ++ ret = clk_prepare_enable(clk); ++ if (ret) { ++ dev_warn(&pdev->dev, "enabling xtal clk failed (%d)\n", ++ ret); ++ } else { ++ if (clk_get_rate(clk) == 40000000) ++ priv->xtal_is_40m = true; ++ clk_disable_unprepare(clk); ++ } ++ clk_put(clk); ++ } ++ ++ dev_set_drvdata(&pdev->dev, priv); + + for_each_available_child_of_node(pdev->dev.of_node, child) { + struct mvebu_a3700_comphy_lane *lane; +@@ -277,7 +1382,7 @@ static int mvebu_a3700_comphy_probe(stru + continue; + } + +- if (lane_id >= MVEBU_A3700_COMPHY_LANES) { ++ if (lane_id >= 3) { + dev_err(&pdev->dev, "invalid 'reg' property\n"); + continue; + } +@@ -295,11 +1400,21 @@ static int mvebu_a3700_comphy_probe(stru + return PTR_ERR(phy); + } + ++ lane->priv = priv; + lane->dev = &pdev->dev; + lane->mode = PHY_MODE_INVALID; + lane->submode = PHY_INTERFACE_MODE_NA; + lane->id = lane_id; ++ lane->invert_tx = false; ++ lane->invert_rx = false; + phy_set_drvdata(phy, lane); ++ ++ /* ++ * To avoid relying on the bootloader/firmware configuration, ++ * power off all comphys. ++ */ ++ mvebu_a3700_comphy_reset(phy); ++ lane->needs_reset = false; + } + + provider = devm_of_phy_provider_register(&pdev->dev, +@@ -323,5 +1438,7 @@ static struct platform_driver mvebu_a370 + module_platform_driver(mvebu_a3700_comphy_driver); + + MODULE_AUTHOR("Miquèl Raynal "); ++MODULE_AUTHOR("Pali Rohár "); ++MODULE_AUTHOR("Marek Behún "); + MODULE_DESCRIPTION("Common PHY driver for A3700"); + MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch b/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch new file mode 100644 index 0000000000..33203a154d --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch @@ -0,0 +1,31 @@ +From 66c51c39fd4bf05e99debf0e71de5704231c57dc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 23 Sep 2021 19:26:26 +0200 +Subject: [PATCH] arm64: dts: marvell: armada-37xx: Add xtal clock to comphy + node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the +reference xtal clock. So add missing xtal clock source into comphy device +tree node. If the property is not present, the driver defaults to 25 MHz +xtal rate (which, as far as we know, is used by all the existing boards). + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +--- + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +@@ -265,6 +265,8 @@ + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; ++ clocks = <&xtalclk>; ++ clock-names = "xtal"; + + comphy0: phy@0 { + reg = <0>; diff --git a/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch b/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch new file mode 100644 index 0000000000..3c994d2548 --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch @@ -0,0 +1,61 @@ +From 750bb44dbbe9dfb4ba3e1f8a746b831b39ba3cd9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 23 Sep 2021 19:35:57 +0200 +Subject: [PATCH] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada + 3720" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9. + +Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data. + +AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so +remove this flag completely. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +--- + drivers/ata/ahci.h | 2 -- + drivers/ata/ahci_mvebu.c | 2 +- + drivers/ata/libahci_platform.c | 2 +- + 3 files changed, 2 insertions(+), 4 deletions(-) + +--- a/drivers/ata/ahci.h ++++ b/drivers/ata/ahci.h +@@ -240,8 +240,6 @@ enum { + as default lpm_policy */ + AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during + suspend/resume */ +- AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP +- from phy_power_on() */ + AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ + + /* ap->flags bits */ +--- a/drivers/ata/ahci_mvebu.c ++++ b/drivers/ata/ahci_mvebu.c +@@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data + + static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { + .plat_config = ahci_mvebu_armada_3700_config, +- .flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON, ++ .flags = AHCI_HFLAG_SUSPEND_PHYS, + }; + + static const struct of_device_id ahci_mvebu_of_match[] = { +--- a/drivers/ata/libahci_platform.c ++++ b/drivers/ata/libahci_platform.c +@@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahc + } + + rc = phy_power_on(hpriv->phys[i]); +- if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) { ++ if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } diff --git a/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch b/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch new file mode 100644 index 0000000000..b8a3e880ce --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch @@ -0,0 +1,163 @@ +From 9f0dfb279b1dd505d5e10b10e4a78a62030978d8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 23 Sep 2021 19:40:06 +0200 +Subject: [PATCH] Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for + Armada 3720" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. + +Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and +then also whole xhci_mvebu_a3700_plat_setup() function which is there just +to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. + +xhci plat_setup callback is not used by any other xhci plat driver, so +remove this callback completely. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +--- + drivers/usb/host/xhci-mvebu.c | 42 ----------------------------------- + drivers/usb/host/xhci-mvebu.h | 6 ----- + drivers/usb/host/xhci-plat.c | 20 +---------------- + drivers/usb/host/xhci-plat.h | 1 - + 4 files changed, 1 insertion(+), 68 deletions(-) + +--- a/drivers/usb/host/xhci-mvebu.c ++++ b/drivers/usb/host/xhci-mvebu.c +@@ -8,7 +8,6 @@ + #include + #include + #include +-#include + + #include + #include +@@ -74,47 +73,6 @@ int xhci_mvebu_mbus_init_quirk(struct us + + return 0; + } +- +-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +-{ +- struct xhci_hcd *xhci = hcd_to_xhci(hcd); +- struct device *dev = hcd->self.controller; +- struct phy *phy; +- int ret; +- +- /* Old bindings miss the PHY handle */ +- phy = of_phy_get(dev->of_node, "usb3-phy"); +- if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) +- return -EPROBE_DEFER; +- else if (IS_ERR(phy)) +- goto phy_out; +- +- ret = phy_init(phy); +- if (ret) +- goto phy_put; +- +- ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); +- if (ret) +- goto phy_exit; +- +- ret = phy_power_on(phy); +- if (ret == -EOPNOTSUPP) { +- /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ +- dev_warn(dev, "PHY unsupported by firmware\n"); +- xhci->quirks |= XHCI_SKIP_PHY_INIT; +- } +- if (ret) +- goto phy_exit; +- +- phy_power_off(phy); +-phy_exit: +- phy_exit(phy); +-phy_put: +- of_phy_put(phy); +-phy_out: +- +- return 0; +-} + + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) + { +--- a/drivers/usb/host/xhci-mvebu.h ++++ b/drivers/usb/host/xhci-mvebu.h +@@ -12,18 +12,12 @@ struct usb_hcd; + + #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) + int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); + #else + static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) + { + return 0; + } +- +-static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +-{ +- return 0; +-} + + static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) + { +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -44,16 +44,6 @@ static void xhci_priv_plat_start(struct + priv->plat_start(hcd); + } + +-static int xhci_priv_plat_setup(struct usb_hcd *hcd) +-{ +- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); +- +- if (!priv->plat_setup) +- return 0; +- +- return priv->plat_setup(hcd); +-} +- + static int xhci_priv_init_quirk(struct usb_hcd *hcd) + { + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); +@@ -121,7 +111,6 @@ static const struct xhci_plat_priv xhci_ + }; + + static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { +- .plat_setup = xhci_mvebu_a3700_plat_setup, + .init_quirk = xhci_mvebu_a3700_init_quirk, + }; + +@@ -341,14 +330,7 @@ static int xhci_plat_probe(struct platfo + + hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); + xhci->shared_hcd->tpl_support = hcd->tpl_support; +- +- if (priv) { +- ret = xhci_priv_plat_setup(hcd); +- if (ret) +- goto disable_usb_phy; +- } +- +- if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) ++ if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) + hcd->skip_phy_initialization = 1; + + if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) +--- a/drivers/usb/host/xhci-plat.h ++++ b/drivers/usb/host/xhci-plat.h +@@ -13,7 +13,6 @@ + struct xhci_plat_priv { + const char *firmware_name; + unsigned long long quirks; +- int (*plat_setup)(struct usb_hcd *); + void (*plat_start)(struct usb_hcd *); + int (*init_quirk)(struct usb_hcd *); + int (*suspend_quirk)(struct usb_hcd *); diff --git a/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch b/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch new file mode 100644 index 0000000000..857ee66a31 --- /dev/null +++ b/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch @@ -0,0 +1,36 @@ +From 9a352062b7e3857742389dff6f64393481dc755e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 23 Sep 2021 19:37:05 +0200 +Subject: [PATCH] Revert "PCI: aardvark: Fix initialization with old Marvell's + Arm Trusted Firmware" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6. + +Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove dead code which handles -EOPNOTSUPP return value. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +--- + drivers/pci/controller/pci-aardvark.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1637,9 +1637,7 @@ static int advk_pcie_enable_phy(struct a + } + + ret = phy_power_on(pcie->phy); +- if (ret == -EOPNOTSUPP) { +- dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); +- } else if (ret) { ++ if (ret) { + phy_exit(pcie->phy); + return ret; + } diff --git a/target/linux/generic/pending-5.15/920-mangle_bootargs.patch b/target/linux/generic/pending-5.15/920-mangle_bootargs.patch new file mode 100644 index 0000000000..fc64a4205e --- /dev/null +++ b/target/linux/generic/pending-5.15/920-mangle_bootargs.patch @@ -0,0 +1,71 @@ +From: Imre Kaloz +Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default + +Enabling this option renames the bootloader supplied root= +and rootfstype= variables, which might have to be know but +would break the automatisms OpenWrt uses. + +Signed-off-by: Imre Kaloz +--- + init/Kconfig | 9 +++++++++ + init/main.c | 24 ++++++++++++++++++++++++ + 2 files changed, 33 insertions(+) + +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -1800,6 +1800,15 @@ config EMBEDDED + an embedded system so certain expert options are available + for configuration. + ++config MANGLE_BOOTARGS ++ bool "Rename offending bootargs" ++ depends on EXPERT ++ help ++ Sometimes the bootloader passed bogus root= and rootfstype= ++ parameters to the kernel, and while you want to ignore them, ++ you need to know the values f.e. to support dual firmware ++ layouts on the flash. ++ + config HAVE_PERF_EVENTS + bool + help +--- a/init/main.c ++++ b/init/main.c +@@ -608,6 +608,29 @@ static inline void setup_nr_cpu_ids(void + static inline void smp_prepare_cpus(unsigned int maxcpus) { } + #endif + ++#ifdef CONFIG_MANGLE_BOOTARGS ++static void __init mangle_bootargs(char *command_line) ++{ ++ char *rootdev; ++ char *rootfs; ++ ++ rootdev = strstr(command_line, "root=/dev/mtdblock"); ++ ++ if (rootdev) ++ strncpy(rootdev, "mangled_rootblock=", 18); ++ ++ rootfs = strstr(command_line, "rootfstype"); ++ ++ if (rootfs) ++ strncpy(rootfs, "mangled_fs", 10); ++ ++} ++#else ++static void __init mangle_bootargs(char *command_line) ++{ ++} ++#endif ++ + /* + * We need to store the untouched command line for future reference. + * We also need to store the touched command line since the parameter +@@ -869,6 +892,7 @@ asmlinkage __visible void __init __no_sa + pr_notice("%s", linux_banner); + early_security_init(); + setup_arch(&command_line); ++ mangle_bootargs(command_line); + setup_boot_config(command_line); + setup_command_line(command_line); + setup_nr_cpu_ids(); -- 2.30.2