From 9bac1c20b8f39f2e0e342b087add5093b94feaed Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Wed, 5 May 2021 22:05:39 +0900 Subject: [PATCH] realtek: backport gpio-realtek-otto driver from 5.13 to 5.10 This patch backports "gpio-realtek-otto" driver to Kernel 5.10. "MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" is used in OpenWrt, so update the dependency by the additional patch. Note: GPIO mapping is changed in the upstreamed driver. old - new 24 - 0 25 - 1 26 - 2 27 - 3 28 - 4 29 - 5 30 - 6 31 - 7 16 - 8 17 - 9 18 - 10 19 - 11 20 - 12 21 - 13 22 - 14 23 - 15 8 - 16 9 - 17 10 - 18 11 - 19 12 - 20 13 - 21 14 - 22 15 - 23 Signed-off-by: INAGAKI Hiroshi --- target/linux/realtek/config-5.10 | 3 + ...s-gpio-binding-for-realtek-otto-gpio.patch | 109 +++++ ...3-gpio-add-realtek-otto-gpio-support.patch | 394 ++++++++++++++++++ ...e-dependencies-for-gpio-realtek-otto.patch | 13 + 4 files changed, 519 insertions(+) create mode 100644 target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch create mode 100644 target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch create mode 100644 target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch diff --git a/target/linux/realtek/config-5.10 b/target/linux/realtek/config-5.10 index b9ed86b426..8baecf42f3 100644 --- a/target/linux/realtek/config-5.10 +++ b/target/linux/realtek/config-5.10 @@ -72,6 +72,9 @@ CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_REALTEK_OTTO=y CONFIG_GPIO_RTL8231=y CONFIG_REALTEK_SOC_PHY=y CONFIG_GRO_CELLS=y diff --git a/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch b/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch new file mode 100644 index 0000000000..111591c640 --- /dev/null +++ b/target/linux/realtek/patches-5.10/001-5.13-dt-bindings-gpio-binding-for-realtek-otto-gpio.patch @@ -0,0 +1,109 @@ +From a362c0ce64866939c3daa17c76943cfed555b065 Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Tue, 30 Mar 2021 19:48:42 +0200 +Subject: dt-bindings: gpio: Binding for Realtek Otto GPIO + +Add a binding description for Realtek's GPIO controller found on several +of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and +RTL839x series of switch SoCs. + +A fallback binding 'realtek,otto-gpio' is provided for cases where the +actual port ordering is not known yet, and enabling the interrupt +controller may result in uncaught interrupts. + +Signed-off-by: Sander Vanheule +Reviewed-by: Linus Walleij +Reviewed-by: Rob Herring +Signed-off-by: Bartosz Golaszewski +--- + .../bindings/gpio/realtek,otto-gpio.yaml | 78 ++++++++++++++++++++++ + 1 file changed, 78 insertions(+) + create mode 100644 Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml + +diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml +new file mode 100644 +index 0000000000000..100f20cebd76a +--- /dev/null ++++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml +@@ -0,0 +1,78 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Realtek Otto GPIO controller ++ ++maintainers: ++ - Sander Vanheule ++ - Bert Vermeulen ++ ++description: | ++ Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists ++ of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts. ++ Each bank's interrupts are cascased into one interrupt line on the parent ++ interrupt controller, if provided. ++ This binding allows defining a single bank in the devicetree. The interrupt ++ controller is not supported on the fallback compatible name, which only ++ allows for GPIO port use. ++ ++properties: ++ $nodename: ++ pattern: "^gpio@[0-9a-f]+$" ++ ++ compatible: ++ items: ++ - enum: ++ - realtek,rtl8380-gpio ++ - realtek,rtl8390-gpio ++ - const: realtek,otto-gpio ++ ++ reg: ++ maxItems: 1 ++ ++ "#gpio-cells": ++ const: 2 ++ ++ gpio-controller: true ++ ++ ngpios: ++ minimum: 1 ++ maximum: 32 ++ ++ interrupt-controller: true ++ ++ "#interrupt-cells": ++ const: 2 ++ ++ interrupts: ++ maxItems: 1 ++ ++required: ++ - compatible ++ - reg ++ - "#gpio-cells" ++ - gpio-controller ++ ++additionalProperties: false ++ ++dependencies: ++ interrupt-controller: [ interrupts ] ++ ++examples: ++ - | ++ gpio@3500 { ++ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; ++ reg = <0x3500 0x1c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ngpios = <24>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ interrupt-parent = <&rtlintc>; ++ interrupts = <23>; ++ }; ++ ++... +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch b/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch new file mode 100644 index 0000000000..fc13824282 --- /dev/null +++ b/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch @@ -0,0 +1,394 @@ +From f0f7d662e8514169c90d3d84cd6df773b2983088 Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Tue, 30 Mar 2021 19:48:43 +0200 +Subject: gpio: Add Realtek Otto GPIO support + +Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to +64 GPIOs, divided over two banks. Each bank has a set of registers for +32 GPIOs, with support for edge-triggered interrupts. + +Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most +registers pack one bit per GPIO, except for the IMR register, which +packs two bits per GPIO (AB-CD). + +Although the byte order is currently assumed to have port A..D at offset +0x0..0x3, this has been observed to be reversed on other, Lexra-based, +SoCs (e.g. RTL8196E/97D/97F). + +Interrupt support is disabled for the fallback devicetree-compatible +'realtek,otto-gpio'. This allows for quick support of GPIO banks in +which the byte order would be unknown. In this case, the port ordering +in the IMR registers may not match the reversed order in the other +registers (DCBA, and BA-DC or DC-BA). + +Signed-off-by: Sander Vanheule +Reviewed-by: Linus Walleij +Reviewed-by: Andy Shevchenko +Signed-off-by: Bartosz Golaszewski +--- + drivers/gpio/Kconfig | 13 ++ + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-realtek-otto.c | 325 +++++++++++++++++++++++++++++++++++++++ + 3 files changed, 339 insertions(+) + create mode 100644 drivers/gpio/gpio-realtek-otto.c + +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -489,6 +489,19 @@ config GPIO_RDA + help + Say Y here to support RDA Micro GPIO controller. + ++config GPIO_REALTEK_OTTO ++ tristate "Realtek Otto GPIO support" ++ depends on MACH_REALTEK_RTL ++ default MACH_REALTEK_RTL ++ select GPIO_GENERIC ++ select GPIOLIB_IRQCHIP ++ help ++ The GPIO controller on the Otto MIPS platform supports up to two ++ banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs ++ are grouped in four 8-bit wide ports. ++ ++ When built as a module, the module will be called realtek_otto_gpio. ++ + config GPIO_REG + bool + help +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -124,6 +124,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o + obj-$(CONFIG_GPIO_RDA) += gpio-rda.o + obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o ++obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o + obj-$(CONFIG_GPIO_REG) += gpio-reg.o + obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o + obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o +--- /dev/null ++++ b/drivers/gpio/gpio-realtek-otto.c +@@ -0,0 +1,325 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * Total register block size is 0x1C for one bank of four ports (A, B, C, D). ++ * An optional second bank, with ports E, F, G, and H, may be present, starting ++ * at register offset 0x1C. ++ */ ++ ++/* ++ * Pin select: (0) "normal", (1) "dedicate peripheral" ++ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits ++ * in the peripheral registers. ++ */ ++#define REALTEK_GPIO_REG_CNR 0x00 ++/* Clear bit (0) for input, set bit (1) for output */ ++#define REALTEK_GPIO_REG_DIR 0x08 ++#define REALTEK_GPIO_REG_DATA 0x0C ++/* Read bit for IRQ status, write 1 to clear IRQ */ ++#define REALTEK_GPIO_REG_ISR 0x10 ++/* Two bits per GPIO in IMR registers */ ++#define REALTEK_GPIO_REG_IMR 0x14 ++#define REALTEK_GPIO_REG_IMR_AB 0x14 ++#define REALTEK_GPIO_REG_IMR_CD 0x18 ++#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0) ++#define REALTEK_GPIO_IRQ_EDGE_FALLING 1 ++#define REALTEK_GPIO_IRQ_EDGE_RISING 2 ++#define REALTEK_GPIO_IRQ_EDGE_BOTH 3 ++ ++#define REALTEK_GPIO_MAX 32 ++#define REALTEK_GPIO_PORTS_PER_BANK 4 ++ ++/** ++ * realtek_gpio_ctrl - Realtek Otto GPIO driver data ++ * ++ * @gc: Associated gpio_chip instance ++ * @base: Base address of the register block for a GPIO bank ++ * @lock: Lock for accessing the IRQ registers and values ++ * @intr_mask: Mask for interrupts lines ++ * @intr_type: Interrupt type selection ++ * ++ * Because the interrupt mask register (IMR) combines the function of IRQ type ++ * selection and masking, two extra values are stored. @intr_mask is used to ++ * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store ++ * the selected interrupt types. The logical AND of these values is written to ++ * IMR on changes. ++ */ ++struct realtek_gpio_ctrl { ++ struct gpio_chip gc; ++ void __iomem *base; ++ raw_spinlock_t lock; ++ u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK]; ++ u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK]; ++}; ++ ++/* Expand with more flags as devices with other quirks are added */ ++enum realtek_gpio_flags { ++ /* ++ * Allow disabling interrupts, for cases where the port order is ++ * unknown. This may result in a port mismatch between ISR and IMR. ++ * An interrupt would appear to come from a different line than the ++ * line the IRQ handler was assigned to, causing uncaught interrupts. ++ */ ++ GPIO_INTERRUPTS_DISABLED = BIT(0), ++}; ++ ++static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(data); ++ ++ return container_of(gc, struct realtek_gpio_ctrl, gc); ++} ++ ++/* ++ * Normal port order register access ++ * ++ * Port information is stored with the first port at offset 0, followed by the ++ * second, etc. Most registers store one bit per GPIO and use a u8 value per ++ * port. The two interrupt mask registers store two bits per GPIO, so use u16 ++ * values. ++ */ ++static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl, ++ unsigned int port, u16 irq_type, u16 irq_mask) ++{ ++ iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port); ++} ++ ++static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, ++ unsigned int port, u8 mask) ++{ ++ iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port); ++} ++ ++static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port) ++{ ++ return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port); ++} ++ ++/* Set the rising and falling edge mask bits for a GPIO port pin */ ++static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value) ++{ ++ return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin; ++} ++ ++static void realtek_gpio_irq_ack(struct irq_data *data) ++{ ++ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); ++ irq_hw_number_t line = irqd_to_hwirq(data); ++ unsigned int port = line / 8; ++ unsigned int port_pin = line % 8; ++ ++ realtek_gpio_clear_isr(ctrl, port, BIT(port_pin)); ++} ++ ++static void realtek_gpio_irq_unmask(struct irq_data *data) ++{ ++ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); ++ unsigned int line = irqd_to_hwirq(data); ++ unsigned int port = line / 8; ++ unsigned int port_pin = line % 8; ++ unsigned long flags; ++ u16 m; ++ ++ raw_spin_lock_irqsave(&ctrl->lock, flags); ++ m = ctrl->intr_mask[port]; ++ m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); ++ ctrl->intr_mask[port] = m; ++ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); ++ raw_spin_unlock_irqrestore(&ctrl->lock, flags); ++} ++ ++static void realtek_gpio_irq_mask(struct irq_data *data) ++{ ++ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); ++ unsigned int line = irqd_to_hwirq(data); ++ unsigned int port = line / 8; ++ unsigned int port_pin = line % 8; ++ unsigned long flags; ++ u16 m; ++ ++ raw_spin_lock_irqsave(&ctrl->lock, flags); ++ m = ctrl->intr_mask[port]; ++ m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); ++ ctrl->intr_mask[port] = m; ++ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); ++ raw_spin_unlock_irqrestore(&ctrl->lock, flags); ++} ++ ++static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type) ++{ ++ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); ++ unsigned int line = irqd_to_hwirq(data); ++ unsigned int port = line / 8; ++ unsigned int port_pin = line % 8; ++ unsigned long flags; ++ u16 type, t; ++ ++ switch (flow_type & IRQ_TYPE_SENSE_MASK) { ++ case IRQ_TYPE_EDGE_FALLING: ++ type = REALTEK_GPIO_IRQ_EDGE_FALLING; ++ break; ++ case IRQ_TYPE_EDGE_RISING: ++ type = REALTEK_GPIO_IRQ_EDGE_RISING; ++ break; ++ case IRQ_TYPE_EDGE_BOTH: ++ type = REALTEK_GPIO_IRQ_EDGE_BOTH; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ irq_set_handler_locked(data, handle_edge_irq); ++ ++ raw_spin_lock_irqsave(&ctrl->lock, flags); ++ t = ctrl->intr_type[port]; ++ t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); ++ t |= realtek_gpio_imr_bits(port_pin, type); ++ ctrl->intr_type[port] = t; ++ realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]); ++ raw_spin_unlock_irqrestore(&ctrl->lock, flags); ++ ++ return 0; ++} ++ ++static void realtek_gpio_irq_handler(struct irq_desc *desc) ++{ ++ struct gpio_chip *gc = irq_desc_get_handler_data(desc); ++ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); ++ struct irq_chip *irq_chip = irq_desc_get_chip(desc); ++ unsigned int lines_done; ++ unsigned int port_pin_count; ++ unsigned int irq; ++ unsigned long status; ++ int offset; ++ ++ chained_irq_enter(irq_chip, desc); ++ ++ for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) { ++ status = realtek_gpio_read_isr(ctrl, lines_done / 8); ++ port_pin_count = min(gc->ngpio - lines_done, 8U); ++ for_each_set_bit(offset, &status, port_pin_count) { ++ irq = irq_find_mapping(gc->irq.domain, offset); ++ generic_handle_irq(irq); ++ } ++ } ++ ++ chained_irq_exit(irq_chip, desc); ++} ++ ++static int realtek_gpio_irq_init(struct gpio_chip *gc) ++{ ++ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); ++ unsigned int port; ++ ++ for (port = 0; (port * 8) < gc->ngpio; port++) { ++ realtek_gpio_write_imr(ctrl, port, 0, 0); ++ realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0)); ++ } ++ ++ return 0; ++} ++ ++static struct irq_chip realtek_gpio_irq_chip = { ++ .name = "realtek-otto-gpio", ++ .irq_ack = realtek_gpio_irq_ack, ++ .irq_mask = realtek_gpio_irq_mask, ++ .irq_unmask = realtek_gpio_irq_unmask, ++ .irq_set_type = realtek_gpio_irq_set_type, ++}; ++ ++static const struct of_device_id realtek_gpio_of_match[] = { ++ { ++ .compatible = "realtek,otto-gpio", ++ .data = (void *)GPIO_INTERRUPTS_DISABLED, ++ }, ++ { ++ .compatible = "realtek,rtl8380-gpio", ++ }, ++ { ++ .compatible = "realtek,rtl8390-gpio", ++ }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, realtek_gpio_of_match); ++ ++static int realtek_gpio_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ unsigned int dev_flags; ++ struct gpio_irq_chip *girq; ++ struct realtek_gpio_ctrl *ctrl; ++ u32 ngpios; ++ int err, irq; ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) ++ return -ENOMEM; ++ ++ dev_flags = (unsigned int) device_get_match_data(dev); ++ ++ ngpios = REALTEK_GPIO_MAX; ++ device_property_read_u32(dev, "ngpios", &ngpios); ++ ++ if (ngpios > REALTEK_GPIO_MAX) { ++ dev_err(&pdev->dev, "invalid ngpios (max. %d)\n", ++ REALTEK_GPIO_MAX); ++ return -EINVAL; ++ } ++ ++ ctrl->base = devm_platform_ioremap_resource(pdev, 0); ++ if (IS_ERR(ctrl->base)) ++ return PTR_ERR(ctrl->base); ++ ++ raw_spin_lock_init(&ctrl->lock); ++ ++ err = bgpio_init(&ctrl->gc, dev, 4, ++ ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL, ++ ctrl->base + REALTEK_GPIO_REG_DIR, NULL, ++ BGPIOF_BIG_ENDIAN_BYTE_ORDER); ++ if (err) { ++ dev_err(dev, "unable to init generic GPIO"); ++ return err; ++ } ++ ++ ctrl->gc.ngpio = ngpios; ++ ctrl->gc.owner = THIS_MODULE; ++ ++ irq = platform_get_irq_optional(pdev, 0); ++ if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) { ++ girq = &ctrl->gc.irq; ++ girq->chip = &realtek_gpio_irq_chip; ++ girq->default_type = IRQ_TYPE_NONE; ++ girq->handler = handle_bad_irq; ++ girq->parent_handler = realtek_gpio_irq_handler; ++ girq->num_parents = 1; ++ girq->parents = devm_kcalloc(dev, girq->num_parents, ++ sizeof(*girq->parents), GFP_KERNEL); ++ if (!girq->parents) ++ return -ENOMEM; ++ girq->parents[0] = irq; ++ girq->init_hw = realtek_gpio_irq_init; ++ } ++ ++ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl); ++} ++ ++static struct platform_driver realtek_gpio_driver = { ++ .driver = { ++ .name = "realtek-otto-gpio", ++ .of_match_table = realtek_gpio_of_match, ++ }, ++ .probe = realtek_gpio_probe, ++}; ++module_platform_driver(realtek_gpio_driver); ++ ++MODULE_DESCRIPTION("Realtek Otto GPIO support"); ++MODULE_AUTHOR("Sander Vanheule "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch b/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch new file mode 100644 index 0000000000..4ff98e44e8 --- /dev/null +++ b/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch @@ -0,0 +1,13 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -491,8 +491,8 @@ config GPIO_RDA + + config GPIO_REALTEK_OTTO + tristate "Realtek Otto GPIO support" +- depends on MACH_REALTEK_RTL +- default MACH_REALTEK_RTL ++ depends on RTL838X ++ default RTL838X + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help -- 2.30.2