From a3cf3e2c489d5b6f534d1b4d6f7b462f81c9c141 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Sun, 30 Apr 2023 17:13:33 +0100 Subject: [PATCH] mediatek: filogic: add driver for Richtek RT5190A regulator The Richtek RT5190A is used on the MT7988 reference board. Backport and enable the driver on the filogic subtarget, so we can support cpufreq on the MT7988 reference board. Signed-off-by: Daniel Golle --- target/linux/mediatek/filogic/config-5.15 | 3 +- target/linux/mediatek/mt7622/config-5.15 | 1 + target/linux/mediatek/mt7623/config-5.15 | 1 + ...dd-bindings-for-Richtek-RT5190A-PMIC.patch | 180 ++++++ ...a-Add-support-for-Richtek-RT5190A-PM.patch | 562 ++++++++++++++++++ 5 files changed, 746 insertions(+), 1 deletion(-) create mode 100644 target/linux/mediatek/patches-5.15/830-v5.18-regulator-Add-bindings-for-Richtek-RT5190A-PMIC.patch create mode 100644 target/linux/mediatek/patches-5.15/831-v5.18-regulator-rt5190a-Add-support-for-Richtek-RT5190A-PM.patch diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15 index 224d10d0e1..3e6a1654f2 100644 --- a/target/linux/mediatek/filogic/config-5.15 +++ b/target/linux/mediatek/filogic/config-5.15 @@ -16,7 +16,6 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANTS_NO_INSTR=y CONFIG_ARM64=y CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_CNP is not set CONFIG_ARM64_CRYPTO=y CONFIG_ARM64_ERRATUM_843419=y CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y @@ -354,10 +353,12 @@ CONFIG_REED_SOLOMON=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_REED_SOLOMON_ENC8=y CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y CONFIG_REGMAP_MMIO=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MT6380=y +CONFIG_REGULATOR_RT5190A=y CONFIG_RESET_CONTROLLER=y CONFIG_RFS_ACCEL=y CONFIG_RODATA_FULL_DEFAULT_ENABLED=y diff --git a/target/linux/mediatek/mt7622/config-5.15 b/target/linux/mediatek/mt7622/config-5.15 index 79df71c990..30a5ff948f 100644 --- a/target/linux/mediatek/mt7622/config-5.15 +++ b/target/linux/mediatek/mt7622/config-5.15 @@ -377,6 +377,7 @@ CONFIG_REGMAP_MMIO=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MT6380=y +# CONFIG_REGULATOR_RT5190A is not set CONFIG_RESET_CONTROLLER=y CONFIG_RFS_ACCEL=y CONFIG_RODATA_FULL_DEFAULT_ENABLED=y diff --git a/target/linux/mediatek/mt7623/config-5.15 b/target/linux/mediatek/mt7623/config-5.15 index af0a5c1939..039a904f19 100644 --- a/target/linux/mediatek/mt7623/config-5.15 +++ b/target/linux/mediatek/mt7623/config-5.15 @@ -472,6 +472,7 @@ CONFIG_REGULATOR_MT6323=y # CONFIG_REGULATOR_MT6358 is not set # CONFIG_REGULATOR_MT6380 is not set # CONFIG_REGULATOR_MT6397 is not set +# CONFIG_REGULATOR_RT5190A is not set # CONFIG_REGULATOR_QCOM_LABIBB is not set # CONFIG_REGULATOR_QCOM_SPMI is not set # CONFIG_REGULATOR_QCOM_USB_VBUS is not set diff --git a/target/linux/mediatek/patches-5.15/830-v5.18-regulator-Add-bindings-for-Richtek-RT5190A-PMIC.patch b/target/linux/mediatek/patches-5.15/830-v5.18-regulator-Add-bindings-for-Richtek-RT5190A-PMIC.patch new file mode 100644 index 0000000000..30891d3487 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/830-v5.18-regulator-Add-bindings-for-Richtek-RT5190A-PMIC.patch @@ -0,0 +1,180 @@ +From b77e70f6b8f2cc62fba847f3008a430a09ef275d Mon Sep 17 00:00:00 2001 +From: ChiYuan Huang +Date: Wed, 9 Mar 2022 16:01:42 +0800 +Subject: [PATCH 1/2] regulator: Add bindings for Richtek RT5190A PMIC + +Add bindings for Richtek RT5190A PMIC. + +Signed-off-by: ChiYuan Huang +Reviewed-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/1646812903-32496-2-git-send-email-u0084500@gmail.com +Signed-off-by: Mark Brown +--- + .../regulator/richtek,rt5190a-regulator.yaml | 141 ++++++++++++++++++ + .../regulator/richtek,rt5190a-regulator.h | 15 ++ + 2 files changed, 156 insertions(+) + create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml + create mode 100644 include/dt-bindings/regulator/richtek,rt5190a-regulator.h + +--- /dev/null ++++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml +@@ -0,0 +1,141 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Richtek RT5190A PMIC Regulator ++ ++maintainers: ++ - ChiYuan Huang ++ ++description: | ++ The RT5190A integrates 1 channel buck controller, 3 channels high efficiency ++ synchronous buck converters, 1 LDO, I2C control interface and peripherial ++ logical control. ++ ++ It also supports mute AC OFF depop sound and quick setting storage while ++ input power is removed. ++ ++properties: ++ compatible: ++ enum: ++ - richtek,rt5190a ++ ++ reg: ++ maxItems: 1 ++ ++ interrupts: ++ maxItems: 1 ++ ++ vin2-supply: ++ description: phandle to buck2 input voltage. ++ ++ vin3-supply: ++ description: phandle to buck3 input voltage. ++ ++ vin4-supply: ++ description: phandle to buck4 input voltage. ++ ++ vinldo-supply: ++ description: phandle to ldo input voltage ++ ++ richtek,mute-enable: ++ description: | ++ The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control ++ signal. When enabled, The normal behavior is to bypass the 'mutein' signal ++ 'muteout'. But if the power source removal is detected from 'vdet', ++ whatever the 'mutein' signal is, it will pull down the 'muteout' to force ++ speakers mute. this function is commonly used to prevent the speaker pop ++ noise during AC power turned off in the modern TV system design. ++ type: boolean ++ ++ regulators: ++ type: object ++ ++ patternProperties: ++ "^buck[1-4]$|^ldo$": ++ type: object ++ $ref: regulator.yaml# ++ description: | ++ regulator description for buck1 and buck4. ++ ++ properties: ++ regulator-allowed-modes: ++ description: | ++ buck operating mode, only buck1/4 support mode operating. ++ 0: auto mode ++ 1: force pwm mode ++ items: ++ enum: [0, 1] ++ ++ richtek,latchup-enable: ++ type: boolean ++ description: | ++ If specified, undervolt protection mode changes from the default ++ hiccup to latchup. ++ ++ unevaluatedProperties: false ++ ++ additionalProperties: false ++ ++required: ++ - compatible ++ - reg ++ - regulators ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include ++ #include ++ ++ i2c { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pmic@64 { ++ compatible = "richtek,rt5190a"; ++ reg = <0x64>; ++ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; ++ vin2-supply = <&rt5190_buck1>; ++ vin3-supply = <&rt5190_buck1>; ++ vin4-supply = <&rt5190_buck1>; ++ ++ regulators { ++ rt5190_buck1: buck1 { ++ regulator-name = "rt5190a-buck1"; ++ regulator-min-microvolt = <5090000>; ++ regulator-max-microvolt = <5090000>; ++ regulator-allowed-modes = ; ++ regulator-boot-on; ++ }; ++ buck2 { ++ regulator-name = "rt5190a-buck2"; ++ regulator-min-microvolt = <600000>; ++ regulator-max-microvolt = <1400000>; ++ regulator-boot-on; ++ }; ++ buck3 { ++ regulator-name = "rt5190a-buck3"; ++ regulator-min-microvolt = <600000>; ++ regulator-max-microvolt = <1400000>; ++ regulator-boot-on; ++ }; ++ buck4 { ++ regulator-name = "rt5190a-buck4"; ++ regulator-min-microvolt = <850000>; ++ regulator-max-microvolt = <850000>; ++ regulator-allowed-modes = ; ++ regulator-boot-on; ++ }; ++ ldo { ++ regulator-name = "rt5190a-ldo"; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-boot-on; ++ }; ++ }; ++ }; ++ }; +--- /dev/null ++++ b/include/dt-bindings/regulator/richtek,rt5190a-regulator.h +@@ -0,0 +1,15 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++#ifndef __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__ ++#define __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__ ++ ++/* ++ * BUCK/LDO mode constants which may be used in devicetree properties ++ * (eg. regulator-allowed-modes). ++ * See the manufacturer's datasheet for more information on these modes. ++ */ ++ ++#define RT5190A_OPMODE_AUTO 0 ++#define RT5190A_OPMODE_FPWM 1 ++ ++#endif diff --git a/target/linux/mediatek/patches-5.15/831-v5.18-regulator-rt5190a-Add-support-for-Richtek-RT5190A-PM.patch b/target/linux/mediatek/patches-5.15/831-v5.18-regulator-rt5190a-Add-support-for-Richtek-RT5190A-PM.patch new file mode 100644 index 0000000000..0e0f099e50 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/831-v5.18-regulator-rt5190a-Add-support-for-Richtek-RT5190A-PM.patch @@ -0,0 +1,562 @@ +From 760423dfad53877b468490758fe7ea968ded9402 Mon Sep 17 00:00:00 2001 +From: ChiYuan Huang +Date: Wed, 9 Mar 2022 16:01:43 +0800 +Subject: [PATCH 2/2] regulator: rt5190a: Add support for Richtek RT5190A PMIC + +Add support for Richtek RT5190A PMIC. + +Signed-off-by: ChiYuan Huang +Link: https://lore.kernel.org/r/1646812903-32496-3-git-send-email-u0084500@gmail.com +Signed-off-by: Mark Brown +--- + drivers/regulator/Kconfig | 10 + + drivers/regulator/Makefile | 1 + + drivers/regulator/rt5190a-regulator.c | 513 ++++++++++++++++++++++++++ + 3 files changed, 524 insertions(+) + create mode 100644 drivers/regulator/rt5190a-regulator.c + +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -1037,6 +1037,16 @@ config REGULATOR_RT5033 + RT5033 PMIC. The device supports multiple regulators like + current source, LDO and Buck. + ++config REGULATOR_RT5190A ++ tristate "Richtek RT5190A PMIC" ++ depends on I2C ++ select REGMAP_I2C ++ help ++ This adds support for voltage regulator in Richtek RT5190A PMIC. ++ It integratas 1 channel buck controller, 3 channels high efficiency ++ buck converters, 1 LDO, mute AC OFF depop function, with the general ++ I2C control interface. ++ + config REGULATOR_RT6160 + tristate "Richtek RT6160 BuckBoost voltage regulator" + depends on I2C +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -125,6 +125,7 @@ obj-$(CONFIG_REGULATOR_ROHM) += rohm-reg + obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o + obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o + obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o ++obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o + obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o + obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o + obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o +--- /dev/null ++++ b/drivers/regulator/rt5190a-regulator.c +@@ -0,0 +1,513 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define RT5190A_REG_MANUFACTURE 0x00 ++#define RT5190A_REG_BUCK2VSEL 0x04 ++#define RT5190A_REG_BUCK3VSEL 0x05 ++#define RT5190A_REG_DCDCCNTL 0x06 ++#define RT5190A_REG_ENABLE 0x07 ++#define RT5190A_REG_DISCHARGE 0x09 ++#define RT5190A_REG_PROTMODE 0x0A ++#define RT5190A_REG_MUTECNTL 0x0B ++#define RT5190A_REG_PGSTAT 0x0F ++#define RT5190A_REG_OVINT 0x10 ++#define RT5190A_REG_HOTDIEMASK 0x17 ++ ++#define RT5190A_VSEL_MASK GENMASK(6, 0) ++#define RT5190A_RID_BITMASK(rid) BIT(rid + 1) ++#define RT5190A_BUCK1_DISCHG_MASK GENMASK(1, 0) ++#define RT5190A_BUCK1_DISCHG_ONVAL 0x01 ++#define RT5190A_OVERVOLT_MASK GENMASK(7, 0) ++#define RT5190A_UNDERVOLT_MASK GENMASK(15, 8) ++#define RT5190A_CH234OT_MASK BIT(29) ++#define RT5190A_CHIPOT_MASK BIT(28) ++ ++#define RT5190A_BUCK23_MINUV 600000 ++#define RT5190A_BUCK23_MAXUV 1400000 ++#define RT5190A_BUCK23_STEPUV 10000 ++#define RT5190A_BUCK23_STEPNUM ((1400000 - 600000) / 10000 + 1) ++ ++enum { ++ RT5190A_IDX_BUCK1 = 0, ++ RT5190A_IDX_BUCK2, ++ RT5190A_IDX_BUCK3, ++ RT5190A_IDX_BUCK4, ++ RT5190A_IDX_LDO, ++ RT5190A_MAX_IDX ++}; ++ ++struct rt5190a_priv { ++ struct device *dev; ++ struct regmap *regmap; ++ struct regulator_desc rdesc[RT5190A_MAX_IDX]; ++ struct regulator_dev *rdev[RT5190A_MAX_IDX]; ++}; ++ ++static int rt5190a_get_error_flags(struct regulator_dev *rdev, ++ unsigned int *flags) ++{ ++ struct regmap *regmap = rdev_get_regmap(rdev); ++ int rid = rdev_get_id(rdev); ++ unsigned int pgood_stat; ++ int ret; ++ ++ ret = regmap_read(regmap, RT5190A_REG_PGSTAT, &pgood_stat); ++ if (ret) ++ return ret; ++ ++ if (!(pgood_stat & RT5190A_RID_BITMASK(rid))) ++ *flags = REGULATOR_ERROR_FAIL; ++ else ++ *flags = 0; ++ ++ return 0; ++} ++ ++static int rt5190a_fixed_buck_set_mode(struct regulator_dev *rdev, ++ unsigned int mode) ++{ ++ struct regmap *regmap = rdev_get_regmap(rdev); ++ int rid = rdev_get_id(rdev); ++ unsigned int mask = RT5190A_RID_BITMASK(rid), val; ++ ++ switch (mode) { ++ case REGULATOR_MODE_FAST: ++ val = mask; ++ break; ++ case REGULATOR_MODE_NORMAL: ++ val = 0; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return regmap_update_bits(regmap, RT5190A_REG_DCDCCNTL, mask, val); ++} ++ ++static unsigned int rt5190a_fixed_buck_get_mode(struct regulator_dev *rdev) ++{ ++ struct regmap *regmap = rdev_get_regmap(rdev); ++ int rid = rdev_get_id(rdev); ++ unsigned int val; ++ int ret; ++ ++ ret = regmap_read(regmap, RT5190A_REG_DCDCCNTL, &val); ++ if (ret) { ++ dev_err(&rdev->dev, "Failed to get mode [%d]\n", ret); ++ return ret; ++ } ++ ++ if (val & RT5190A_RID_BITMASK(rid)) ++ return REGULATOR_MODE_FAST; ++ ++ return REGULATOR_MODE_NORMAL; ++} ++ ++static const struct regulator_ops rt5190a_ranged_buck_ops = { ++ .enable = regulator_enable_regmap, ++ .disable = regulator_disable_regmap, ++ .is_enabled = regulator_is_enabled_regmap, ++ .set_voltage_sel = regulator_set_voltage_sel_regmap, ++ .get_voltage_sel = regulator_get_voltage_sel_regmap, ++ .list_voltage = regulator_list_voltage_linear, ++ .set_active_discharge = regulator_set_active_discharge_regmap, ++ .get_error_flags = rt5190a_get_error_flags, ++}; ++ ++static const struct regulator_ops rt5190a_fixed_buck_ops = { ++ .enable = regulator_enable_regmap, ++ .disable = regulator_disable_regmap, ++ .is_enabled = regulator_is_enabled_regmap, ++ .set_active_discharge = regulator_set_active_discharge_regmap, ++ .set_mode = rt5190a_fixed_buck_set_mode, ++ .get_mode = rt5190a_fixed_buck_get_mode, ++ .get_error_flags = rt5190a_get_error_flags, ++}; ++ ++static const struct regulator_ops rt5190a_fixed_ldo_ops = { ++ .enable = regulator_enable_regmap, ++ .disable = regulator_disable_regmap, ++ .is_enabled = regulator_is_enabled_regmap, ++ .set_active_discharge = regulator_set_active_discharge_regmap, ++ .get_error_flags = rt5190a_get_error_flags, ++}; ++ ++static irqreturn_t rt5190a_irq_handler(int irq, void *data) ++{ ++ struct rt5190a_priv *priv = data; ++ __le32 raws; ++ unsigned int events, fields; ++ static const struct { ++ unsigned int bitmask; ++ unsigned int report; ++ } event_tbl[] = { ++ { RT5190A_OVERVOLT_MASK, REGULATOR_ERROR_REGULATION_OUT }, ++ { RT5190A_UNDERVOLT_MASK, REGULATOR_ERROR_UNDER_VOLTAGE } ++ }; ++ int i, j, ret; ++ ++ ret = regmap_raw_read(priv->regmap, RT5190A_REG_OVINT, &raws, ++ sizeof(raws)); ++ if (ret) { ++ dev_err(priv->dev, "Failed to read events\n"); ++ return IRQ_NONE; ++ } ++ ++ events = le32_to_cpu(raws); ++ ++ ret = regmap_raw_write(priv->regmap, RT5190A_REG_OVINT, &raws, ++ sizeof(raws)); ++ if (ret) ++ dev_err(priv->dev, "Failed to write-clear events\n"); ++ ++ /* Handle OV,UV events */ ++ for (i = 0; i < ARRAY_SIZE(event_tbl); i++) { ++ fields = events & event_tbl[i].bitmask; ++ fields >>= ffs(event_tbl[i].bitmask) - 1; ++ ++ for (j = 0; j < RT5190A_MAX_IDX; j++) { ++ if (!(fields & RT5190A_RID_BITMASK(j))) ++ continue; ++ ++ regulator_notifier_call_chain(priv->rdev[j], ++ event_tbl[i].report, ++ NULL); ++ } ++ } ++ ++ /* Handle CH234 OT event */ ++ if (events & RT5190A_CH234OT_MASK) { ++ for (j = RT5190A_IDX_BUCK2; j < RT5190A_IDX_LDO; j++) { ++ regulator_notifier_call_chain(priv->rdev[j], ++ REGULATOR_ERROR_OVER_TEMP, ++ NULL); ++ } ++ } ++ ++ /* Warning if CHIP OT occur */ ++ if (events & RT5190A_CHIPOT_MASK) ++ dev_warn(priv->dev, "CHIP overheat\n"); ++ ++ return IRQ_HANDLED; ++} ++ ++static unsigned int rt5190a_of_map_mode(unsigned int mode) ++{ ++ switch (mode) { ++ case RT5190A_OPMODE_AUTO: ++ return REGULATOR_MODE_NORMAL; ++ case RT5190A_OPMODE_FPWM: ++ return REGULATOR_MODE_FAST; ++ default: ++ return REGULATOR_MODE_INVALID; ++ } ++} ++ ++static int rt5190a_of_parse_cb(struct rt5190a_priv *priv, int rid, ++ struct of_regulator_match *match) ++{ ++ struct regulator_desc *desc = priv->rdesc + rid; ++ struct regulator_init_data *init_data = match->init_data; ++ struct device_node *np = match->of_node; ++ bool latchup_enable; ++ unsigned int mask = RT5190A_RID_BITMASK(rid), val; ++ ++ switch (rid) { ++ case RT5190A_IDX_BUCK1: ++ case RT5190A_IDX_BUCK4: ++ case RT5190A_IDX_LDO: ++ init_data->constraints.apply_uV = 0; ++ ++ if (init_data->constraints.min_uV == ++ init_data->constraints.max_uV) ++ desc->fixed_uV = init_data->constraints.min_uV; ++ else { ++ dev_err(priv->dev, ++ "Variable voltage for fixed regulator\n"); ++ return -EINVAL; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ latchup_enable = of_property_read_bool(np, "richtek,latchup-enable"); ++ ++ /* latchup: 0, default hiccup: 1 */ ++ val = !latchup_enable ? mask : 0; ++ ++ return regmap_update_bits(priv->regmap, RT5190A_REG_PROTMODE, mask, val); ++} ++ ++static void rt5190a_fillin_regulator_desc(struct regulator_desc *desc, int rid) ++{ ++ static const char * const regu_name[] = { "buck1", "buck2", ++ "buck3", "buck4", ++ "ldo" }; ++ static const char * const supply[] = { NULL, "vin2", "vin3", "vin4", ++ "vinldo" }; ++ ++ desc->name = regu_name[rid]; ++ desc->supply_name = supply[rid]; ++ desc->owner = THIS_MODULE; ++ desc->type = REGULATOR_VOLTAGE; ++ desc->id = rid; ++ desc->enable_reg = RT5190A_REG_ENABLE; ++ desc->enable_mask = RT5190A_RID_BITMASK(rid); ++ desc->active_discharge_reg = RT5190A_REG_DISCHARGE; ++ desc->active_discharge_mask = RT5190A_RID_BITMASK(rid); ++ desc->active_discharge_on = RT5190A_RID_BITMASK(rid); ++ ++ switch (rid) { ++ case RT5190A_IDX_BUCK1: ++ desc->active_discharge_mask = RT5190A_BUCK1_DISCHG_MASK; ++ desc->active_discharge_on = RT5190A_BUCK1_DISCHG_ONVAL; ++ desc->n_voltages = 1; ++ desc->ops = &rt5190a_fixed_buck_ops; ++ desc->of_map_mode = rt5190a_of_map_mode; ++ break; ++ case RT5190A_IDX_BUCK2: ++ desc->vsel_reg = RT5190A_REG_BUCK2VSEL; ++ desc->vsel_mask = RT5190A_VSEL_MASK; ++ desc->min_uV = RT5190A_BUCK23_MINUV; ++ desc->uV_step = RT5190A_BUCK23_STEPUV; ++ desc->n_voltages = RT5190A_BUCK23_STEPNUM; ++ desc->ops = &rt5190a_ranged_buck_ops; ++ break; ++ case RT5190A_IDX_BUCK3: ++ desc->vsel_reg = RT5190A_REG_BUCK3VSEL; ++ desc->vsel_mask = RT5190A_VSEL_MASK; ++ desc->min_uV = RT5190A_BUCK23_MINUV; ++ desc->uV_step = RT5190A_BUCK23_STEPUV; ++ desc->n_voltages = RT5190A_BUCK23_STEPNUM; ++ desc->ops = &rt5190a_ranged_buck_ops; ++ break; ++ case RT5190A_IDX_BUCK4: ++ desc->n_voltages = 1; ++ desc->ops = &rt5190a_fixed_buck_ops; ++ desc->of_map_mode = rt5190a_of_map_mode; ++ break; ++ case RT5190A_IDX_LDO: ++ desc->n_voltages = 1; ++ desc->ops = &rt5190a_fixed_ldo_ops; ++ break; ++ } ++} ++ ++static struct of_regulator_match rt5190a_regulator_match[] = { ++ { .name = "buck1", }, ++ { .name = "buck2", }, ++ { .name = "buck3", }, ++ { .name = "buck4", }, ++ { .name = "ldo", } ++}; ++ ++static int rt5190a_parse_regulator_dt_data(struct rt5190a_priv *priv) ++{ ++ struct device_node *regulator_np; ++ struct regulator_desc *reg_desc; ++ struct of_regulator_match *match; ++ int i, ret; ++ ++ for (i = 0; i < RT5190A_MAX_IDX; i++) { ++ reg_desc = priv->rdesc + i; ++ match = rt5190a_regulator_match + i; ++ ++ rt5190a_fillin_regulator_desc(reg_desc, i); ++ ++ match->desc = reg_desc; ++ } ++ ++ regulator_np = of_get_child_by_name(priv->dev->of_node, "regulators"); ++ if (!regulator_np) { ++ dev_err(priv->dev, "Could not find 'regulators' node\n"); ++ return -ENODEV; ++ } ++ ++ ret = of_regulator_match(priv->dev, regulator_np, ++ rt5190a_regulator_match, ++ ARRAY_SIZE(rt5190a_regulator_match)); ++ ++ of_node_put(regulator_np); ++ ++ if (ret < 0) { ++ dev_err(priv->dev, ++ "Error parsing regulator init data: %d\n", ret); ++ return ret; ++ } ++ ++ for (i = 0; i < RT5190A_MAX_IDX; i++) { ++ match = rt5190a_regulator_match + i; ++ ++ ret = rt5190a_of_parse_cb(priv, i, match); ++ if (ret) { ++ dev_err(priv->dev, "Failed in [%d] of_parse_cb\n", i); ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++static const struct reg_sequence rt5190a_init_patch[] = { ++ { 0x09, 0x3d, }, ++ { 0x0a, 0x3e, }, ++ { 0x0b, 0x01, }, ++ { 0x10, 0xff, }, ++ { 0x11, 0xff, }, ++ { 0x12, 0xff, }, ++ { 0x13, 0xff, }, ++ { 0x14, 0, }, ++ { 0x15, 0, }, ++ { 0x16, 0x3e, }, ++ { 0x17, 0, } ++}; ++ ++static int rt5190a_device_initialize(struct rt5190a_priv *priv) ++{ ++ bool mute_enable; ++ int ret; ++ ++ ret = regmap_register_patch(priv->regmap, rt5190a_init_patch, ++ ARRAY_SIZE(rt5190a_init_patch)); ++ if (ret) { ++ dev_err(priv->dev, "Failed to do register patch\n"); ++ return ret; ++ } ++ ++ mute_enable = device_property_read_bool(priv->dev, ++ "richtek,mute-enable"); ++ ++ if (mute_enable) { ++ ret = regmap_write(priv->regmap, RT5190A_REG_MUTECNTL, 0x00); ++ if (ret) { ++ dev_err(priv->dev, "Failed to enable mute function\n"); ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++static int rt5190a_device_check(struct rt5190a_priv *priv) ++{ ++ u16 devid; ++ int ret; ++ ++ ret = regmap_raw_read(priv->regmap, RT5190A_REG_MANUFACTURE, &devid, ++ sizeof(devid)); ++ if (ret) ++ return ret; ++ ++ if (devid) { ++ dev_err(priv->dev, "Incorrect device id 0x%04x\n", devid); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static const struct regmap_config rt5190a_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = RT5190A_REG_HOTDIEMASK, ++}; ++ ++static int rt5190a_probe(struct i2c_client *i2c) ++{ ++ struct rt5190a_priv *priv; ++ struct regulator_config cfg = {}; ++ int i, ret; ++ ++ priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->dev = &i2c->dev; ++ ++ priv->regmap = devm_regmap_init_i2c(i2c, &rt5190a_regmap_config); ++ if (IS_ERR(priv->regmap)) { ++ dev_err(&i2c->dev, "Failed to allocate regmap\n"); ++ return PTR_ERR(priv->regmap); ++ } ++ ++ ret = rt5190a_device_check(priv); ++ if (ret) { ++ dev_err(&i2c->dev, "Failed to check device %d\n", ret); ++ return ret; ++ } ++ ++ ret = rt5190a_device_initialize(priv); ++ if (ret) { ++ dev_err(&i2c->dev, "Failed to initialize the device\n"); ++ return ret; ++ } ++ ++ ret = rt5190a_parse_regulator_dt_data(priv); ++ if (ret) { ++ dev_err(&i2c->dev, "Failed to parse regulator dt\n"); ++ return ret; ++ } ++ ++ cfg.dev = &i2c->dev; ++ cfg.regmap = priv->regmap; ++ ++ for (i = 0; i < RT5190A_MAX_IDX; i++) { ++ struct regulator_desc *desc = priv->rdesc + i; ++ struct of_regulator_match *match = rt5190a_regulator_match + i; ++ ++ cfg.init_data = match->init_data; ++ cfg.of_node = match->of_node; ++ ++ priv->rdev[i] = devm_regulator_register(&i2c->dev, desc, &cfg); ++ if (IS_ERR(priv->rdev[i])) { ++ dev_err(&i2c->dev, "Failed to register regulator %s\n", ++ desc->name); ++ return PTR_ERR(priv->rdev[i]); ++ } ++ } ++ ++ if (i2c->irq) { ++ ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, ++ rt5190a_irq_handler, ++ IRQF_ONESHOT, ++ dev_name(&i2c->dev), priv); ++ if (ret) { ++ dev_err(&i2c->dev, "Failed to register interrupt\n"); ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id __maybe_unused rt5190a_device_table[] = { ++ { .compatible = "richtek,rt5190a", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, rt5190a_device_table); ++ ++static struct i2c_driver rt5190a_driver = { ++ .driver = { ++ .name = "rt5190a", ++ .of_match_table = rt5190a_device_table, ++ }, ++ .probe_new = rt5190a_probe, ++}; ++module_i2c_driver(rt5190a_driver); ++ ++MODULE_AUTHOR("ChiYuan Huang "); ++MODULE_DESCRIPTION("Richtek RT5190A Regulator Driver"); ++MODULE_LICENSE("GPL v2"); -- 2.30.2