From b475e8f717163fd0cb070d83d6b0bbef1d5a614b Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Tue, 7 May 2024 13:45:05 +0200 Subject: [PATCH] ipq40xx: wpj419: use existing labels for DMA nodes WPJ419 is still manually defining dma nodes(And even some labels), so lets convert it to use the existing upstream labels for DMA nodes. Link: https://github.com/openwrt/openwrt/pull/15415 Signed-off-by: Robert Marko --- .../arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts index 99875485a3..23dbf9f991 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts @@ -139,10 +139,6 @@ }; }; - blsp_dma: dma@7884000 { - status = "okay"; - }; - spi_0: spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; @@ -300,14 +296,6 @@ status = "okay"; }; - cryptobam: dma@8e04000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - pcie0: pci@40000000 { status = "okay"; perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; @@ -326,6 +314,10 @@ }; }; +&blsp_dma { + status = "okay"; +}; + &watchdog { status = "okay"; }; @@ -334,6 +326,10 @@ status = "okay"; }; +&cryptobam { + status = "okay"; +}; + &usb3_ss_phy { status = "okay"; }; @@ -354,6 +350,10 @@ status = "okay"; }; +&qpic_bam { + status = "okay"; +}; + &nand { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; -- 2.30.2