From b7ad3c5c5d16de37f393fbee2233e1aa1eb7f3b3 Mon Sep 17 00:00:00 2001 From: Nick Hainke Date: Thu, 15 Dec 2022 15:17:26 +0100 Subject: [PATCH] ath79: convert Buffalo WZR-HP-G302H A1A0 WiFis to nvmem-cells Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke --- .../dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts | 29 ++++++++++--------- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 1 - 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts index c6fd220ed1..4a2f749cc4 100644 --- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts +++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts @@ -133,10 +133,22 @@ label = "u-boot-env"; }; - art: partition@50000 { + partition@50000 { reg = <0x50000 0x10000>; label = "art"; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_120c: macaddr@120c { + reg = <0x120c 0x6>; + }; + + calibration_art_1000: calibration@1000 { + reg = <0x1000 0xeb8>; + }; }; partition@60000 { @@ -197,9 +209,8 @@ ath9k: wifi@0,0 { compatible = "pci168c,002a"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&macaddr_art_120c>; - nvmem-cell-names = "mac-address"; - qca,no-eeprom; + nvmem-cells = <&macaddr_art_120c>, <&calibration_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; #gpio-cells = <2>; gpio-controller; }; @@ -212,13 +223,3 @@ &usb { status = "okay"; }; - -&art { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_120c: macaddr@120c { - reg = <0x120c 0x6>; - }; -}; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index ebcac0b6b2..5fcfcaf64f 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -86,7 +86,6 @@ case "$FIRMWARE" in avm,fritz300e) caldata_extract_reverse "urloader" 0x1541 0x440 ;; - buffalo,wzr-hp-g302h-a1a0|\ ubnt,unifi-ap-outdoor-plus) caldata_extract "art" 0x1000 0xeb8 ;; -- 2.30.2