From cb02a376b360d01d70a8161e22f5491042295bcd Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 1 Dec 2017 22:41:11 +0100 Subject: [PATCH] apm821xx: use x86's upgrade scripts for MyBook Live Advantages: - preserves existing partition layout. On the hard-drive. Only the boot and rootfs partition will be overwritten. Disadvantages: - The upgrade process takes much longer to run. from 2-3 seconds to 15-25 seconds. Please note that sysupgrade will refuse to upgrade, if the existing installation has an incompatible partition layout. Future changes to the bootfs and/or rootfs partition size will likely cause breakage to the sysupgrade procedure. In these cases, the ext4-rootfs.img.gz has to be written manually onto the disk. Please don't forget to backup your configuration in this cases. Note2: This patch requires "base-files: upgrade: make get_partitions() endian agnostic" Note3: If your current installation does not host the two changes, sysupgrading will wipe the existing partition layout. Don't forget to backup your data! Signed-off-by: Christian Lamparter --- .../base-files/lib/upgrade/platform.sh | 2 +- .../apm821xx/base-files/lib/upgrade/wdbook.sh | 99 +++++++++++++++---- 2 files changed, 82 insertions(+), 19 deletions(-) diff --git a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh index 55f8ffa75d..8c716bf44e 100755 --- a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh @@ -9,7 +9,7 @@ platform_check_image() { case "$board" in mbl) - mbl_do_platform_check $board "$1" + mbl_do_platform_check "$1" return $?; ;; diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh index d7347516cb..2287e0619d 100644 --- a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh +++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh @@ -1,36 +1,99 @@ . /lib/functions.sh -get_magic_at() { - local file="$1" - local pos="$2" - get_image "$file" | dd bs=1 count=2 skip="$pos" 2>/dev/null | hexdump -v -n 2 -e '1/1 "%02x"' -} +# copied from x86's platform.sh mbl_do_platform_check() { - local board="$1" - local file="$2" - local magic + local diskdev partdev diff - magic=$(get_magic_at "$file" 510) + [ "$#" -gt 1 ] && return 1 - [ "$magic" != "55aa" ] && { - echo "Failed to verify MBR boot signature." + export_bootdevice && export_partdevice diskdev -2 || { + echo "Unable to determine upgrade device" return 1 } + get_partitions "/dev/$diskdev" bootdisk + + #extract the boot sector from the image + get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b 2>/dev/null + + get_partitions /tmp/image.bs image + + #compare tables + diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)" + + rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image + + if [ -n "$diff" ]; then + echo "Partition layout has changed. Full image will be written." + ask_bool 0 "Abort" && exit 1 + return 0 + fi + return 0; } mbl_do_upgrade() { + local diskdev partdev diff + + export_bootdevice && export_partdevice diskdev -2 || { + echo "Unable to determine upgrade device" + return 1 + } + sync - get_image "$1" | dd of=/dev/sda bs=2M conv=fsync - sleep 1 + + if [ "$SAVE_PARTITIONS" = "1" ]; then + get_partitions "/dev/$diskdev" bootdisk + + #extract the boot sector from the image + get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b + + get_partitions /tmp/image.bs image + + #compare tables + diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)" + else + diff=1 + fi + + if [ -n "$diff" ]; then + get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync + + # Separate removal and addtion is necessary; otherwise, partition 1 + # will be missing if it overlaps with the old partition 2 + partx -d - "/dev/$diskdev" + partx -a - "/dev/$diskdev" + + return 0 + fi + + #iterate over each partition from the image and write it to the boot disk + while read part start size; do + # root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem + # one of which is this offset, I'm not sure what's the best fix, so + # here's a WA. + let part=$((part - 2)) + if export_partdevice partdev $part; then + echo "Writing image to /dev/$partdev..." + get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync + else + echo "Unable to find partition $part device, skipped." + fi + done < /tmp/partmap.image + + #copy partition uuid + echo "Writing new UUID to /dev/$diskdev..." + get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync } mbl_copy_config() { - mkdir -p /boot - [ -f /boot/uImage ] || mount -t ext4 -o rw,noatime /dev/sda1 /boot - cp -af "$CONF_TAR" /boot/ - sync - umount /boot + local partdev + + # Same as above /dev/sd[a|b]2 is root, so /boot is -1 + if export_partdevice partdev -1; then + mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt + cp -af "$CONF_TAR" /mnt/ + umount /mnt + fi } -- 2.30.2