From e1ad9ef27007ee75fb8996784f9d593e35843ac7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 27 Sep 2007 15:02:19 +0000 Subject: [PATCH] add initial diagnostic support SVN-Revision: 9048 --- .../adm5120/base-files/default/etc/diag.sh | 48 ++++++++++++++++++ .../adm5120/base-files/default/lib/adm5120.sh | 50 +++++++++++++++++++ 2 files changed, 98 insertions(+) create mode 100755 target/linux/adm5120/base-files/default/etc/diag.sh create mode 100755 target/linux/adm5120/base-files/default/lib/adm5120.sh diff --git a/target/linux/adm5120/base-files/default/etc/diag.sh b/target/linux/adm5120/base-files/default/etc/diag.sh new file mode 100755 index 0000000000..3d5d9d84aa --- /dev/null +++ b/target/linux/adm5120/base-files/default/etc/diag.sh @@ -0,0 +1,48 @@ +#!/bin/sh +# +# Copyright (C) 2007 OpenWrt.org +# +# $Id$ +# + +. /lib/adm5120.sh + +led_set_attr() { + [ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2" +} + +status_led_set_timer() { + led_set_attr $status_led "trigger" "timer" + led_set_attr $status_led "delay_on" "$1" + led_set_attr $status_led "delay_off" "$2" +} + +status_led_set_morse() { + led_set_attr $status_led "trigger" "morse" + led_set_attr $status_led "delay" "$1" + led_set_attr $status_led "message" "$2" +} + +status_led_on() { + led_set_attr $status_led "trigger" "none" + led_set_attr $status_led "brightness" 255 +} + +status_led_off() { + led_set_attr $status_led "trigger" "none" + led_set_attr $status_led "brightness" 0 +} + +set_state() { + case "$1" in + preinit) + status_led_set_timer 200 200 + ;; + failsafe) + status_led_set_timer 50 50 + ;; + done) + status_led_on + ;; + esac +} diff --git a/target/linux/adm5120/base-files/default/lib/adm5120.sh b/target/linux/adm5120/base-files/default/lib/adm5120.sh new file mode 100755 index 0000000000..d599a09b15 --- /dev/null +++ b/target/linux/adm5120/base-files/default/lib/adm5120.sh @@ -0,0 +1,50 @@ +#!/bin/sh +# +# Copyright (C) 2007 OpenWrt.org +# +# $Id$ +# + +board_name="" +status_led="" +sys_mtd_part="" + +adm5120_detect() { + board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /system type/ {print $2}' /proc/cpuinfo) + + case "$board_name" in + "Cellvision"*) + status_led="status" + sys_mtd_part="firmware" + ;; + "Compex"*) + status_led="diag" + case "$board_name" in + *-WRT) + sys_mtd_part="trx" + ;; + *) + sys_mtd_part="partition1" + ;; + esac + ;; + "Edimax"*) + status_led="power" + sys_mtd_part="firmware" + ;; + "Infineon"*) + sys_mtd_part="firmware" + ;; + "Mikrotik"*) + status_led="power" + ;; + "ZyXEL"*) + status_led="power" + sys_mtd_part="trx" + ;; + *) + ;; + esac +} + +adm5120_detect -- 2.30.2