babeld/files/babeld.config

   1 package babeld
   2
   3 # Babeld reads options from the following files (the last one takes precedence
   4 # if an option is defined in several places):
   5 # - the file defined by the option conf_file (default: /etc/babeld.conf),
   6 # - *.conf files in the directory defined by conf_dir (default: /tmp/babel.d/),
   7 # - this UCI configuration file.
   8
   9 # See "man babeld" for all available options ("Global options").
  10 # Important: remember to use '_' instead of '-' in option names.
  11 config general
  12         # option 'random_id' 'true'
  13         # option 'debug' '1'
  14         # option 'local_port' '33123'
  15         # option 'log_file' '/var/log/babeld.log'
  16         ## Enable ipv6-subtrees by default since OpenWrt should ship with a
  17         ## recent enough kernel for it to work.
  18         option 'ipv6_subtrees' 'true'
  19         # list 'import_table' '42'
  20         # list 'import_table' '100'
  21         ## Alternative configuration file and directory.
  22         ## See comment at the top of this file for more details.
  23         # option 'conf_file' '/etc/babeld.conf'
  24         # option 'conf_dir' '/tmp/babel.d/'
  25
  26 config interface
  27         ## Remove this line to enable babeld on this interface
  28         option 'ignore' 'true'
  29         ## You can use aliases (like lan, wlan) or real names (like eth0.0).
  30         ## If you use an alias, it must be already defined when babeld starts.
  31         ## Otherwise, the name is taken literally and the interface can be
  32         ## brought up later (useful for tunnels for instance).
  33         option 'ifname' 'wlan'
  34         ## You can set options, see babeld man page ("Interface configuration")
  35         # option 'rxcost' '256'
  36         # option 'hello_interval' '1'
  37
  38 config interface
  39         option 'ignore' 'true'
  40         ## Physical interface name
  41         option 'ifname' 'tun-example'
  42         # option 'max_rtt_penalty' '90'
  43
  44 # A config interface without "option ifname" will set default options
  45 # for all interfaces.  Interface-specific configuration always overrides
  46 # default configuration.
  47 config interface
  48         # option 'enable_timestamps' 'true'
  49         # option 'update_interval' '30'
  50
  51
  52 # A filter consists of a type ('in', 'out' or 'redistribute'), an action
  53 # ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
  54 # etc.).  See babeld man page ("Filtering rules") for more details.
  55 # Here is a sample filter wich redistributes the default route if its
  56 # protocol number is "boot", e.g. when it installed by dhcp.  It is
  57 # disabled by default.
  58 config filter
  59         option 'ignore' 'true'
  60         # Type
  61         option 'type'   'redistribute'
  62         # Selectors: ip, eq, le, ge, src_ip, src_eq, src_le, src_ge, neigh, id,
  63         # proto, local, if.
  64         option 'ip'     '0.0.0.0/0'
  65         option 'eq'     '0'
  66         option 'proto'  '3'
  67         # Action (one of: allow, deny, metric XXX, src-prefix XXX).
  68         option 'action' 'metric 128'
  69
  70 # Notice that the 'local' selector is a boolean.
  71 config filter
  72         option 'ignore' 'true'
  73         option 'type'   'redistribute'
  74         option 'local'  'true'
  75         # No action means "allow"