#!/bin/sh /etc/rc.common

# Copyright (C) 2014 - Eloi Carbó Solé (GSoC2014) 
# BGP/Bird integration with OpenWRT and QMP
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

BIRD="bird4"
BIRD_CONFIG="/etc/$BIRD.conf"

START=99
STOP=10

SERVICE_DAEMONIZE=1
SERVICE_USE_PID=1
SERVICE_PID_FILE="/var/run/$BIRD.pid"

BIRD_BIN="/usr/sbin/$BIRD"


# Function: writeToConfig $1
# $1 string.
# Allows to write in the $BIRD_CONFIG file, the string $1. This function does not check the $1 string.
# Example: writeToConfig "value: $N"
writeToConfig() {
    echo "$1" >> $BIRD_CONFIG
}

# Function: write $1 $2
# $1 string. $2 string.
# This function checks if $2 is empty. If not, it writes the string $1 in the $BIRD_CONFIG file.
# Use write function to check if $1, value found inside $2, is not empty and can be written in the configuration file.
# Example: N=""; write "value: $N" $N; 
write() {
    [ -n "$2" ] && writeToConfig "$1"
}

#Function: write_bool $1 $2
# $1 string; $2 boolean
# This function checks if $2 is true or false and write the $1 string into $BIRD_CONFIG file.
# The function writes a # before the $2 string if its false.
# Example: local N=0; write_bool $N
write_bool() {
    [ "$2" == 0 ] && writeToConfig "#   $1;" || writeToConfig "    $1;"
}

# Function: get $1 $2
# $1 string. $2 string
# This function uses the external UCI function "config_get $result $section $option" to obtain a string value from UCI config file.
# To use this function, use the same name of the UCI option for the variable.
# Example: UCI (option id 'abcd'); local id; get id $section
get() {
    config_get $1 $2 $1
}

# Function: get_bool $1 $2
# $1 boolean. $2 string
# This function uses the external UCI function "config_get_bool $result $section $option" to obtain a boolean value from UCI config file.
# To use this function, use the same name of the UCI option for the variable $1.
# Example: UCI (option use_ipv6 '1'); local use_ipv6; get use_ipv6 $section
get_bool() {
    config_get_bool $1 $2 $1
}

# Function: multipath_list $1
# $1 string
# This function writes the $1 string in the multipath routes.
multipath_list() {
    write "          via $1" $1
}

# Function: prepare_tables $1
# $1 string
# This function gets each "table" section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI table section
prepare_tables() {
    local section="$1"; local name
    get name $section
    write "table $name;" $name
}

# Function: prepare_global $1
# $1 string
# This function gets each "global" section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI global section. prepare_global is the first configuration set in the bird4.conf and removes the old file.
prepare_global () {
    local section="$1"
    local log_file; local log; local debug; local router_id; local table

    # Remove old configuration file
    rm -f "$BIRD_CONFIG"
	
    get log_file $section
    get log $section
    get debug $section
    get router_id $section
    get table $section
    
    # First line of the NEW configuration file
    echo "#Bird4 configuration using UCI:" > $BIRD_CONFIG
    writeToConfig " "
    [ -n "$log_file" -a -n "$log" ] && writeToConfig 'log "'$log_file'" '$log';'
    write "debug protocols $debug;" $debug
    writeToConfig " "
    writeToConfig "#Router ID"
    write "router id $router_id;" $router_id
    writeToConfig " "
    writeToConfig "#Secondary tables"
    config_foreach prepare_tables 'table'
    writeToConfig " "
}

# Function: prepare_routes $1
# $1 string
# This function gets each "route" section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI route section. Each type of route has its own treatment.
prepare_routes() {
    local instance; local prefix; local via; local type
    local section="$1"
    local protoInstance="$2"
    get instance $section

    if [ "$instance" = "$protoInstance" ]; then
        get type $section
        case "$type" in
            "router")
                get prefix $section
                get via $section
                [ -n "$prefix" -a -n "$via" ] && writeToConfig "    route $prefix via $via;"
                ;;
            "special")
                get prefix $section
                get attribute $section
                [ -n "$prefix" -a -n "$attribute" ] && writeToConfig "    route $prefix $attribute;"
                ;;
            "iface")
                get prefix $section
                get iface $section
                [ -n "$prefix" -a -n "$iface" ] && writeToConfig '    route '$prefix' via "'$iface'";'
                ;;
            "multipath")
                get prefix $section
                write "    route $prefix multipath" $prefix
                config_list_foreach $section l_via multipath_list
                writeToConfig "        ;"
                ;;
        esac
    fi
}

# Function: prepare_kernel $1
# $1 string
# This function gets each "kernel" protocol section in the UCI configuration and sets each option in the bird6.conf file.
# $1 is set as the ID of the current UCI kernel section.
prepare_kernel() {
    local section="$1"
    write "#$section configuration:" $section
    local disabled; local table; local kernel_table; local import; local export; local scan_time; local persist; local learn
    get_bool disabled $section
    get table $section
    get import $section
    get export $section
    get scan_time $section
    get kernel_table $section
    get learn $section
    get persist $section
    writeToConfig "protocol kernel {"
    write_bool disabled $disabled
    write "    table $table;" $table
    write "    kernel table $kernel_table;" $kernel_table
    write_bool learn $learn
    write_bool persist $persist
    write "    scan time $scan_time;" $scan_time
    write "    import $import;" $import
    write "    export $export;" $export
    writeToConfig "}"
    writeToConfig " "
}

# Function: prepare_static $1
# $1 string
# This function gets each "static" protocol section in the UCI configuration and sets each option in the bird6.conf file.
# $1 is set as the ID of the current UCI static section.
prepare_static() {
    local section="$1"
    local disabled
    get disabled $section
    if [ "$disabled" -eq 0 ]; then
        local table
        get table $section
        writeToConfig "#$section configration:" $section
        writeToConfig "protocol static {"
        write "    table $table;" $table
        config_foreach prepare_routes 'route' $section
        writeToConfig "}"
        writeToConfig " "
    fi
}

# Function: prepare_device $1
# $1 string
# This function gets each "device" protocol section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI device section.
prepare_device() {
    local section="$1"	
    local disabled; local scan_time
    get disabled $section
    get scan_time $section
    write "#$section configuration:" $section
    writeToConfig "protocol device {"
    write_bool disabled $disabled
    write "    scan time $scan_time;" $scan_time
    writeToConfig "}"
    writeToConfig " "
}

# Function: prepare_bgp_template $1
# $1 string
# This function gets each "bgp_template" protocol section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI bgp_template section.
# Careful! Template options will be replaced by "instance" options if there is any match.
prepare_bgp_template() {
    local section="$1"
    local disabled; local table; local import; local export; local local_address; local local_as; local neighbor_address; local neighbor_as; local source_address; local next_hop_self; local next_hop_keep; local rr_client; local rr_cluster_id; local import_limit; local import_limit_action; local export_limit; local export_limit_action; local receive_limit; local receive_limit_action
    get_bool disabled $section
    get_bool next_hop_self $section
    get_bool next_hop_keep $section
    get table $section
    get import $section
    get export $section
    get local_address $section
    get local_as $section
    get rr_client $section
    get rr_cluster_id $section
    get import_limit $section
    get import_limit_action $section
    get export_limit $section
    get export_limit_action $section
    get receive_limit $section
    get receive_limit_action $section
    get neighbor_address $section
    get neighbor_as $section
	
    writeToConfig "#$section template:"
    writeToConfig "template bgp $section {"
    [ -n "$disabled" ] && write_bool disabled $disabled
    write "    table $table;" $table
    write "    local as $local_as;" $local_as
    write "    source address $local_address;" $local_address
    write "    import $import;" $import
    write "    export $export;" $export
    if [ -n "$next_hop_self" ]; then
        [ "$next_hop_self" = "1" ] && writeToConfig "    next hop self;" || writeToConfig "#    next hop self;"
    fi
    if [ -n "$next_hop_keep" ]; then
        [ "$next_hop_keep" = "1" ] && writeToConfig "    next hop keep;" || writeToConfig "#    next hop keep;"
    fi
    [ "$rr_client" = "1" ] && writeToConfig "    rr client;" || writeToConfig "#    rr client;"
    write "    rr cluster id $rr_cluster_id;" $rr_cluster_id
    if [ -n "$import_limit" -a "$import_limit" > "0" ]; then
        [ -z "$import_limit_action" ] && $import_limit_action = "warn"
        writeToConfig "    import limit $import_limit action $import_limit_action;"
    fi
    if [ -n "$export_limit" -a "$export_limit" > "0" ]; then
        [ -z "$export_limit_action" ] && $export_limit_action = "warn"
        writeToConfig "    export limit $export_limit action $export_limit_action;"
    fi
    if [ -n "$receive_limit" -a "$receive_limit" > "0" ]; then
        [ -z "$receive_limit_action" ] && $receive_limit_action = "warn"
        writeToConfig "    receive limit $receive_limit action $receive_limit_action;"
    fi
    [ -n "$neighbor_address" -a -n "$neighbor_as" ] && writeToConfig "    neighbor $neighbor_address as $neighbor_as;"
    writeToConfig "}"
    writeToConfig " "
}

# Function: prepare_bgp $1
# $1 string
# This function gets each "bgp" protocol section in the UCI configuration and sets each option in the bird6.conf file.
# $1 is set as the ID of the current UCI bgp section.
# Careful! The options set in bgp instances overlap bgp_template ones.
prepare_bgp() {
    local section="$1"
    local disabled; local table; local template; local description; local import; local export; local local_address; local local_as; local neighbor_address; local neighbor_as; local rr_client; local rr_cluster_id; local import_limit; local import_limit_action; local export_limit; local export_limit_action; local receive_limit; local receive_limit_action
    get disabled $section
    get table $section
    get template $section
    get description $section
    get import $section
    get export $section
    get local_address $section
    get local_as $section
    get rr_client $section
    get rr_cluster_id $section
    get import_limit $section
    get import_limit_action $section
    get export_limit $section
    get export_limit_action $section
    get receive_limit $section
    get receive_limit_action $section
    get neighbor_address $section
    get neighbor_as $section
    
    writeToConfig "#$section configuration:"
    [ -n "$template" ] && writeToConfig "protocol bgp $section from $template {" || writeToConfig "protocol bgp $section {"
    [ -n "$disabled" ] && write_bool disabled $disabled
    write "    table $table;" $table
 #   [ -n "$description" ] && writeToConfig '    description "'$description'";'
    write "    local as $local_as;" $local_as
    write "    source address $local_address;" $local_address
    write "    import $import;" $import
    write "    export $export;" $export
    if [ -n "$next_hop_self" ]; then
        [ "$next_hop_self" = "1" ] && writeToConfig "    next hop self;" || writeToConfig "#    next hop self;"
    fi
    if [ -n "$next_hop_keep" ]; then
        [ "$next_hop_keep" = "1" ] && writeToConfig "    next hop keep;" || writeToConfig "#    next hop keep;"
    fi
    [ "$rr_client" = "1" ] && writeToConfig "    rr client;" || writeToConfig "#    rr client;"
    write "    rr cluster id $rr_cluster_id;" $rr_cluster_id
    if [ -n "$import_limit" -a "$import_limit" > "0" ]; then
        [ -z "$import_limit_action" ] && $import_limit_action = "warn"
        writeToConfig "    import limit $import_limit action $import_limit_action;"
    fi
    if [ -n "$export_limit" -a "$export_limit" > "0" ]; then
        [ -z "$export_limit_action" ] && $export_limit_action = "warn"
        writeToConfig "    export limit $export_limit action $export_limit_action;"
    fi
    if [ -n "$receive_limit" -a "$receive_limit" > "0" ]; then
        [ -z "$receive_limit_action" ] && $receive_limit_action = "warn"
        writeToConfig "    receive limit $receive_limit action $receive_limit_action;"
    fi
    [ -n "$neighbor_address" -a -n "$neighbor_as" ] && writeToConfig "    neighbor $neighbor_address as $neighbor_as;"
    writeToConfig "}"
    writeToConfig " "
}

# Function: prepare_bgp_filters $1
# $1 string
# This function gets each "bgp_filter" protocol section in the UCI configuration and sets each option in the bird4.conf file.
# $1 is set as the ID of the current UCI bgp_filter section.
# This function checks if the filter file exists and, in that case, it writes its content to the configuration file.
prepare_bgp_filters() {
    local section="$1"
    local type
    local file_path 
    get type $section
    get file_path $section
    if [ -e "$file_path" ]; then
        local filter_content=`cat $file_path`
        if [ -n "$type" -a "$type" = "bgp" ]; then
            writeToConfig "#Filter $section:"
            writeToConfig "${filter_content}"
            writeToConfig " "
        fi
    fi
}

start() {
    config_load bird4
    local use_UCI_config
    get use_UCI_config 'bird'
	
    if [ -z "$use_UCI_config" -o "$use_UCI_config" = "0" ]; then
        service_start $BIRD_BIN -d -c $BIRD_CONFIG -P $SERVICE_PID_FILE
    else
        #Set Bird4 configuration location:
        local UCI_config_File
        get UCI_config_File 'bird'
        BIRD_CONFIG=${UCI_config_File:-/tmp/bird4.conf}
        #Setup the basic configuration
        prepare_global 'global'
        config_foreach prepare_kernel 'kernel'
        config_foreach prepare_static 'static'
        config_foreach prepare_device 'device'
        #config_foreach prepare_direct 'direct'
		
        #Setup the protocols configuration (currently BGP only)
        config_foreach prepare_bgp_template 'bgp_template'
        config_foreach prepare_bgp 'bgp'
        config_foreach prepare_bgp_filters 'filter'
        #Start the service
        service_start $BIRD_BIN -d -c $BIRD_CONFIG -P $SERVICE_PID_FILE
    fi
}

stop() {
    service_stop $BIRD_BIN
}

restart() {
    stop
    start
}


reload() {
    service_reload $BIRD_BIN
}