PKG_NAME:=batctl
-PKG_VERSION:=2016.4
-PKG_RELEASE:=0
-PKG_MD5SUM:=0112f35b2a48d32f23a17a6f45348e63
+PKG_VERSION:=2019.0
+PKG_RELEASE:=2
+PKG_HASH:=997721096ff396644e8d697ea7651e9d38243faf317bcea2661d4139ff58b531
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
PKG_LICENSE:=GPL-2.0
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
-define Package/batctl
+define Package/batctl/Default
URL:=https://www.open-mesh.org/
SECTION:=net
CATEGORY:=Network
- DEPENDS:=+kmod-batman-adv +libnl-tiny +libc
- TITLE:=B.A.T.M.A.N. Advanced user space configuration tool batctl
- MAINTAINER:=Marek Lindner <mareklindner@neomailbox.ch>
+ DEPENDS:=+libnl-tiny +libc +librt
+ PROVIDES:=batctl
+ MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
endef
define Package/batctl/description
version $(PKG_VERSION) of the user space utility.
endef
+define Package/batctl-tiny
+$(call Package/batctl/Default)
+ TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Minimal)
+ VARIANT:=tiny
+ PROVIDES:=batctl
+ ALTERNATIVES:=100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
+endef
+
+define Package/batctl-tiny/description
+$(Package/batctl/description)
+Only configuration relevant subcommands are enabled.
+endef
+
+define Package/batctl-default
+$(call Package/batctl/Default)
+ TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Default)
+ VARIANT:=default
+ ALTERNATIVES:=200:/usr/sbin/batctl:/usr/libexec/batctl-default
+endef
+
+define Package/batctl-default/description
+$(Package/batctl/description)
+Standard subcommands for configuration and online debugging are enabled.
+endef
+
+define Package/batctl-full
+$(call Package/batctl/Default)
+ TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Full)
+ VARIANT:=full
+ ALTERNATIVES:=300:/usr/sbin/batctl:/usr/libexec/batctl-full
+endef
+
+define Package/batctl-full/description
+$(Package/batctl/description)
+Subcommands for configuration, online and offline debugging are enabled.
+endef
+
# The linker can identify unused sections of a binary when each symbol is stored
# in a separate section. This mostly removes unused linker sections and reduces
# the size by ~3% on mipsel.
REVISION="$(PKG_BATCTL_SHORTREV)" \
CC="$(TARGET_CC)" \
DESTDIR="$(PKG_INSTALL_DIR)" \
- batctl install
+ batctl install \
+ REVISION="openwrt-$(PKG_VERSION)-$(PKG_RELEASE)"
+
+config-n := \
+ aggregation \
+ ap_isolation \
+ backbonetable \
+ bisect_iv \
+ bonding \
+ bridge_loop_avoidance \
+ claimtable \
+ dat_cache \
+ distributed_arp_table \
+ event \
+ fragmentation \
+ gateways \
+ gw_mode \
+ hop_penalty \
+ interface \
+ isolation_mark \
+ log \
+ loglevel \
+ mcast_flags \
+ multicast_mode \
+ nc_nodes \
+ neighbors \
+ network_coding \
+ orig_interval \
+ originators \
+ ping \
+ routing_algo \
+ statistics \
+ tcpdump \
+ throughputmeter \
+ traceroute \
+ transglobal \
+ translate \
+ translocal \
+
+config-settings := \
+ aggregation \
+ ap_isolation \
+ bonding \
+ bridge_loop_avoidance \
+ distributed_arp_table \
+ fragmentation \
+ gw_mode \
+ hop_penalty \
+ interface \
+ isolation_mark \
+ loglevel \
+ multicast_mode \
+ network_coding \
+ orig_interval \
+ routing_algo \
+
+config-tables := \
+ backbonetable \
+ claimtable \
+ dat_cache \
+ gateways \
+ loglevel \
+ nc_nodes \
+ neighbors \
+ originators \
+ statistics \
+ transglobal \
+ translocal \
+
+config-tools := \
+ event \
+ log \
+ ping \
+ tcpdump \
+ throughputmeter \
+ traceroute \
+ translate \
+
+config-extratools := \
+ bisect_iv \
+
+ifeq ($(BUILD_VARIANT),tiny)
+
+config-y := \
+ $(config-settings) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),default)
+
+config-y := \
+ $(config-settings) \
+ $(config-tables) \
+ $(config-tools) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),full)
+
+config-y := \
+ $(config-settings) \
+ $(config-tables) \
+ $(config-tools) \
+ $(config-extratools) \
+
+endif
+
+define ConfigVars
+$(subst $(space),,$(foreach opt,$(config-$(1)),CONFIG_$(opt)=$(1)
+))
+endef
+define batctl_config
+$(call ConfigVars,n)$(call ConfigVars,y)
+endef
+$(eval $(call shexport,batctl_config))
define Build/Compile
- $(MAKE_BATCTL_ENV) $(MAKE) -C "$(PKG_BUILD_DIR)" $(MAKE_BATCTL_ARGS)
+ $(MAKE_BATCTL_ENV) $(MAKE) -C "$(PKG_BUILD_DIR)" $(MAKE_BATCTL_ARGS) \
+ $$$$$(call shvar,batctl_config)
+endef
+
+define Package/batctl-tiny/install
+ $(INSTALL_DIR) $(1)/usr/libexec
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-tiny
endef
-define Build/Clean
- rm -rf $(BUILD_DIR)/$(PKG_NAME)/
+define Package/batctl-default/install
+ $(INSTALL_DIR) $(1)/usr/libexec
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-default
endef
-define Package/batctl/install
- $(INSTALL_DIR) $(1)/usr/sbin
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/sbin/
+define Package/batctl-full/install
+ $(INSTALL_DIR) $(1)/usr/libexec
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-full
endef
-$(eval $(call BuildPackage,batctl))
+$(eval $(call BuildPackage,batctl-default))
+$(eval $(call BuildPackage,batctl-tiny))
+$(eval $(call BuildPackage,batctl-full))
projects / feed / routing.git / blobdiff