#
# description: Startup/shutdown script for nodogsplash captive portal
#
+# Alexander Couzens <lynxis@fe80.eu> 2014
# P. Kube 2007
#
# (Based on wifidog startup script
# Comment by that author: Could be better, but it's working as expected)
#
+START=95
+STOP=95
+
+USE_PROCD=1
IPT=/usr/sbin/iptables
WD_DIR=/usr/bin
-NDS_CONF=/etc/nodogsplash/nodogsplash.conf
-OPTIONS=""
-START=65
-STOP=65
# -s -d 5 runs in background, with level 5 (not so verbose) messages to syslog
# -f -d 7 runs in foreground, with level 7 (verbose) debug messages to terminal
-# N.B.: -f will fail if starting at boot from rcS
-#OPTIONS="-s -d 5"
-
-start() {
- echo "Starting nodogsplash ... "
- if $WD_DIR/ndsctl status 2> /dev/null; then
- echo "FAILED: nodogsplash already running"
- else
- if test_module && $WD_DIR/nodogsplash $OPTIONS; then
- echo "OK: nodogsplash started"
- else
- echo "FAILED: nodogsplash exited with non 0 status"
- fi
- fi
+OPTIONS="-s -f -d 5"
+CONFIGFILE="/tmp/invalid_nodogsplash.conf"
+
+# nolog(loglevel message ...)
+nolog() {
+ local level=$1
+ shift
+ logger -s -t nodogsplash -p daemon.$level $@
+}
+
+# append_config_option_map <cfgfile> <uci_cfg_obj> <option_name> <config_counterpart> [<optional default>]
+# append "$config_counterpart $value" to cfgfile if option_name exists
+# e.g. append_config_option "$CONFIGFILE" "$cfg" bind_address BindAddress 0.0.0.0
+# will append "BindAddress 192.168.1.1" if uci bind_address is '192.168.1.1'
+append_config_option_map() {
+ local val=""
+ local config_file="$1"
+ local cfg="$2"
+ local option_name="$3"
+ local config_counterpart="$4"
+ local default="$5"
+ config_get val "$cfg" "$option_name" "$default"
+ [ -n "$val" ] && echo "$config_counterpart $val" >> $config_file
+}
+
+# append_config_option <cfgfile> <uci_cfg_obj> <option_name> [<optional default>]
+# append "$option_name $value" to cfgfile if option_name exists
+# e.g. append_config_option "$CONFIGFILE" "$cfg" bind_address 0.0.0.0
+# will append "bind_address 192.168.1.1" if uci bind_address is '192.168.1.1'
+# if uci bind_address is unset append "bind_address 0.0.0.0"
+append_config_option() {
+ local val=""
+ local config_file="$1"
+ local cfg="$2"
+ local option_name="$3"
+ local default="$4"
+ config_get val "$cfg" "$option_name" "$default"
+ [ -n "$val" ] && echo "$option_name $val" >> $config_file
+}
+
+setup_user_authentication() {
+ local cfg="$1"
+ local val
+
+ config_get_bool val "$cfg" authenticate_immediately 0
+ [ $val -gt 0 ] && echo "AuthenticateImmediately yes" >> $CONFIGFILE
+
+ config_get val "$cfg" username
+ if [ -n "$val" ] ; then
+ echo "UsernameAuthentication 1" >> $CONFIGFILE
+ echo "Username $val" >> $CONFIGFILE
+ fi
+
+ config_get val "$cfg" password
+ if [ -n "$val" ] ; then
+ echo "PasswordAuthentication 1" >> $CONFIGFILE
+ echo "Password $val" >> $CONFIGFILE
+ fi
+}
+
+setup_mac_lists() {
+ local cfg="$1"
+ local MAC=""
+ local val
+
+ append_mac() {
+ append MAC "$1" ","
+ }
+
+ config_get val "$cfg" macmechanism
+ if [ -z "$val" ] ; then
+ # check if we have AllowedMACList or BlockedMACList defined they will be ignored
+ config_get val "$cfg" allowedmac
+ if [ -n "$val" ] ; then
+ echo "Ignoring allowedmac - macmechanism not \"allow\"" >&2
+ fi
+
+ config_get val "$cfg" blockedmac
+ if [ -n "$val" ] ; then
+ echo "Ignoring blockedmac - macmechanism not \"block\"" >&2
+ fi
+ elif [ "$val" == "allow" ] ; then
+ MAC=""
+ config_list_foreach "$cfg" allowedmac append_mac
+ echo "AllowedMACList $MAC" >> $CONFIGFILE
+ elif [ "$val" == "block" ] ; then
+ MAC=""
+ config_list_foreach "$cfg" blockedmac append_mac
+ echo "BlockedMACList $MAC" >> $CONFIGFILE
+ else
+ nolog error "$cfg Invalid macmechanism '$val' - allow or block are valid."
+ return 1
+ fi
+ MAC=""
+ config_list_foreach "$cfg" trustedmac append_mac
+ [ -n "$MAC" ] && echo "TrustedMACList $MAC" >> $CONFIGFILE
+}
+
+setup_firewall() {
+ local cfg="$1"
+ local uciname
+ local val
+
+ append_firewall() {
+ echo " FirewallRule $1" >> $CONFIGFILE
+ }
+
+ for rule in $(echo authenticated-users preauthenticated-users users-to-router trusted-users trusted-users-to-router)
+ do
+ uci_name=${rule//-/_}
+ # uci does not allow - dashes
+ echo "FirewallRuleSet $rule {" >> $CONFIGFILE
+ config_list_foreach "$cfg" ${uci_name} append_firewall
+ echo "}" >> $CONFIGFILE
+ config_get val "$cfg" policy_${uci_name}
+ [ -n "$val" ] && echo "EmptyRuleSetPolicy $rule $val" >> $CONFIGFILE
+ done
+}
+
+generate_uci_config() {
+ local cfg="$1"
+ local val
+ local ifname
+ local download
+ local upload
+
+ CONFIGFILE="/tmp/etc/nodogsplash_$cfg.conf"
+
+ echo "# auto-generated config file from /etc/config/nodogsplash" > $CONFIGFILE
+
+ config_get val "$cfg" config
+ if [ -n "$val" ] ; then
+ if [ ! -f "$val" ] ; then
+ nolog error "Configuration file '$file' doesn't exist"
+ return 0
+ fi
+ cat "$val" >> $CONFIGFILE
+ fi
+
+ config_get val "$cfg" network
+ if [ -n "$val" ] ; then
+ if ! network_get_device ifname "$val" ; then
+ nolog error "$cfg can not find ifname for network '$val'"
+ return 1
+ fi
+ fi
+
+ config_get val "$cfg" gatewayinterface
+ if [ -n "$val" ] ; then
+ if [ -n "$ifname" ] ; then
+ nolog error "$cfg cannot use both option network and gatewayinterface"
+ return 1
+ fi
+ ifname="$val"
+ fi
+
+ if [ -z "$ifname" ] ; then
+ nolog error "$cfg option network or gatewayinterface missing"
+ return 1
+ fi
+
+ echo "GatewayInterface $ifname" >> $CONFIGFILE
+
+ append_config_option "$CONFIGFILE" "$cfg" gatewayname
+ append_config_option "$CONFIGFILE" "$cfg" gatewayaddress
+ append_config_option "$CONFIGFILE" "$cfg" gatewayport
+ append_config_option "$CONFIGFILE" "$cfg" maxclients
+ append_config_option "$CONFIGFILE" "$cfg" webroot
+ append_config_option "$CONFIGFILE" "$cfg" debuglevel
+ append_config_option "$CONFIGFILE" "$cfg" splashpage
+ append_config_option "$CONFIGFILE" "$cfg" pagesdir
+ append_config_option "$CONFIGFILE" "$cfg" checkinterval
+ append_config_option "$CONFIGFILE" "$cfg" syslogfacility
+ append_config_option "$CONFIGFILE" "$cfg" gatewayiprange
+ append_config_option "$CONFIGFILE" "$cfg" imagedir
+ append_config_option "$CONFIGFILE" "$cfg" redirecturl
+ append_config_option "$CONFIGFILE" "$cfg" clientidletimeout
+ append_config_option "$CONFIGFILE" "$cfg" clientforcetimeout
+ append_config_option "$CONFIGFILE" "$cfg" gatewayiprange
+ append_config_option "$CONFIGFILE" "$cfg" passwordattempts
+ append_config_option "$CONFIGFILE" "$cfg" macmechanism
+ append_config_option "$CONFIGFILE" "$cfg" uploadlimit
+ append_config_option "$CONFIGFILE" "$cfg" downloadlimit
+ append_config_option "$CONFIGFILE" "$cfg" remoteauthenticatoraction
+ append_config_option "$CONFIGFILE" "$cfg" enablepreauth
+ append_config_option "$CONFIGFILE" "$cfg" binvoucher
+ append_config_option "$CONFIGFILE" "$cfg" forcevoucher
+ append_config_option "$CONFIGFILE" "$cfg" passwordauthentication
+ append_config_option "$CONFIGFILE" "$cfg" usernameauthentication
+ append_config_option "$CONFIGFILE" "$cfg" passwordattempts
+ append_config_option "$CONFIGFILE" "$cfg" username
+ append_config_option "$CONFIGFILE" "$cfg" password
+ append_config_option "$CONFIGFILE" "$cfg" authenticateimmediately
+ append_config_option "$CONFIGFILE" "$cfg" decongesthttpdthreads
+ append_config_option "$CONFIGFILE" "$cfg" httpdthreadthreshold
+ append_config_option "$CONFIGFILE" "$cfg" httpdthreaddelayms
+ append_config_option "$CONFIGFILE" "$cfg" fw_mark_authenticated
+ append_config_option "$CONFIGFILE" "$cfg" fw_mark_trusted
+ append_config_option "$CONFIGFILE" "$cfg" fw_mark_blocked
+
+ config_get download "$cfg" downloadlimit
+ config_get upload "$cfg" uploadlimit
+ [ -n "$upload" -o -n "$download" ] && echo "TrafficControl yes" >> $CONFIGFILE
+
+ setup_mac_lists "$cfg"
+ setup_user_authentication "$cfg"
+ setup_firewall "$cfg"
+}
+
+# setup configuration and start instance
+create_instance() {
+ local cfg="$1"
+ local manual_config
+ local val
+
+ config_get_bool val "$cfg" enabled 0
+ [ $val -gt 0 ] || return 0
+
+ generate_uci_config "$cfg"
+
+ if ! test_module ; then
+ logger -s -t nodogsplash -p daemon.error "nodogsplash is missing some kernel modules"
+ fi
+
+ procd_open_instance $cfg
+ procd_set_param command /usr/bin/nodogsplash -c $CONFIGFILE $OPTIONS
+ procd_set_param respawn
+ procd_set_param file $CONFIGFILE
+ procd_close_instance
+}
+
+start_service() {
+ include /lib/functions
+
+ mkdir -p /tmp/etc/
+ config_load nodogsplash
+
+ config_foreach create_instance nodogsplash
}
-stop() {
- echo "Stopping nodogsplash ... "
- if $WD_DIR/ndsctl status 2> /dev/null; then
- if $WD_DIR/ndsctl stop; then
- echo "OK: nodogsplash stopped"
- else
- echo "FAILED: ndsctl stop exited with non 0 status"
- fi
- else
- echo "FAILED: nodogsplash was not running"
- fi
+stop_service() {
+ # nodogsplash doesn't exit fast enought, when procd terminates it.
+ # otherwise procd will restart nodogsplash twice. first time starting nodogsplash fails, second time it succeeds
+ sleep 1
}
status() {
- $WD_DIR/ndsctl status
+ $WD_DIR/ndsctl status
}
+# Test if we got all modules loaded
test_module() {
+ ### Test ipt_mark with iptables
+ test_ipt_mark () {
+ ($IPT -A FORWARD -m mark --mark 2 -j ACCEPT 2>&1) > /dev/null
+ IPTABLES_OK=$?
+ if [ "$IPTABLES_OK" -eq 0 ]; then
+ ($IPT -D FORWARD -m mark --mark 2 -j ACCEPT 2>&1) > /dev/null
+ return 0
+ else
+ return 1
+ fi
+ }
- ### Test ipt_mark with iptables
- test_ipt_mark () {
- ($IPT -A FORWARD -m mark --mark 2 -j ACCEPT 2>&1) > /dev/null
- IPTABLES_OK=$?
- if [ "$IPTABLES_OK" -eq 0 ]; then
- ($IPT -D FORWARD -m mark --mark 2 -j ACCEPT 2>&1) > /dev/null
- return 0
- else
- return 1
- fi
- }
- ### Test ipt_mac with iptables
- test_ipt_mac () {
- ($IPT -A INPUT -m mac --mac-source 00:00:00:00:00:00 -j ACCEPT 2>&1) > /dev/null
- IPTABLES_OK=$?
- if [ "$IPTABLES_OK" -eq 0 ]; then
- ($IPT -D INPUT -m mac --mac-source 00:00:00:00:00:00 -j ACCEPT 2>&1) > /dev/null
- return 0
- else
- return 1
- fi
- }
-
- ### Test ipt_IMQ with iptables
- test_ipt_IMQ () {
- ($IPT -t mangle -A PREROUTING -j IMQ --todev 0 2>&1) > /dev/null
- IPTABLES_OK=$?
- if [ "$IPTABLES_OK" -eq 0 ]; then
- ($IPT -t mangle -D PREROUTING -j IMQ --todev 0 2>&1) > /dev/null
- return 0
- else
- return 1
- fi
- }
-
- ### Test imq with ip
- test_imq () {
- (ip link set imq0 up 2>&1) > /dev/null
- IMQ0_OK=$?
- (ip link set imq1 up 2>&1) > /dev/null
- IMQ1_OK=$?
- if [ "$IMQ0_OK" -eq 0 -a "$IMQ1_OK" -eq 0 ]; then
- (ip link set imq0 down 2>&1) > /dev/null
- (ip link set imq1 down 2>&1) > /dev/null
- return 0
- else
- return 1
- fi
- }
-
- ### Test sch_htb with tc; requires imq0
- test_sch_htb () {
- (tc qdisc del dev imq0 root 2>&1) > /dev/null
- (tc qdisc add dev imq0 root htb 2>&1) > /dev/null
- TC_OK=$?
- if [ "$TC_OK" -eq 0 ]; then
- (tc qdisc del dev imq0 root 2>&1) > /dev/null
- return 0
- else
- return 1
- fi
- }
-
-
- ### Find a module on disk
- module_exists () {
- EXIST=$(find /lib/modules/`uname -r` -name $1.*o 2> /dev/null)
- if [ -n "$EXIST" ]; then
- return 0
- else
- return 1
- fi
- }
+ ### Test ipt_mac with iptables
+ test_ipt_mac () {
+ ($IPT -A INPUT -m mac --mac-source 00:00:00:00:00:00 -j ACCEPT 2>&1) > /dev/null
+ IPTABLES_OK=$?
+ if [ "$IPTABLES_OK" -eq 0 ]; then
+ ($IPT -D INPUT -m mac --mac-source 00:00:00:00:00:00 -j ACCEPT 2>&1) > /dev/null
+ return 0
+ else
+ return 1
+ fi
+ }
+
+ ### Test ipt_IMQ with iptables
+ test_ipt_IMQ () {
+ ($IPT -t mangle -A PREROUTING -j IMQ --todev 0 2>&1) > /dev/null
+ IPTABLES_OK=$?
+ if [ "$IPTABLES_OK" -eq 0 ]; then
+ ($IPT -t mangle -D PREROUTING -j IMQ --todev 0 2>&1) > /dev/null
+ return 0
+ else
+ return 1
+ fi
+ }
+
+ ### Test imq with ip
+ test_imq () {
+ (ip link set imq0 up 2>&1) > /dev/null
+ IMQ0_OK=$?
+ (ip link set imq1 up 2>&1) > /dev/null
+ IMQ1_OK=$?
+ if [ "$IMQ0_OK" -eq 0 -a "$IMQ1_OK" -eq 0 ]; then
+ (ip link set imq0 down 2>&1) > /dev/null
+ (ip link set imq1 down 2>&1) > /dev/null
+ return 0
+ else
+ return 1
+ fi
+ }
+
+ ### Test sch_htb with tc; requires imq0
+ test_sch_htb () {
+ (tc qdisc del dev imq0 root 2>&1) > /dev/null
+ (tc qdisc add dev imq0 root htb 2>&1) > /dev/null
+ TC_OK=$?
+ if [ "$TC_OK" -eq 0 ]; then
+ (tc qdisc del dev imq0 root 2>&1) > /dev/null
+ return 0
+ else
+ return 1
+ fi
+ }
+
+ ### Find a module on disk
+ module_exists () {
+ EXIST=$(find /lib/modules/`uname -r` -name $1.*o 2> /dev/null)
+ if [ -n "$EXIST" ]; then
+ return 0
+ else
+ return 1
+ fi
+ }
+
+ ### Test if a module is in memory
+ module_in_memory () {
+ MODULE=$(lsmod | grep $1 | awk '{print $1}')
+ if [ "$MODULE" = "$1" ]; then
+ return 0
+ else
+ return 1
+ fi
+ }
- ### Test if a module is in memory
- module_in_memory () {
- MODULE=$(lsmod | grep $1 | awk '{print $1}')
- if [ "$MODULE" = "$1" ]; then
- return 0
+ ### Test functionality of a module; load if necessary
+ do_module_tests () {
+ echo " Testing module $1 $2"
+ "test_$1"
+ if [ $? -ne 0 ]; then
+ echo " Module $1 $2 needed"
+ echo " Scanning disk for $1 module"
+ module_exists $1
+ if [ $? -ne 0 ]; then
+ echo " $1 module missing: please install it"
+ exit 1
else
- return 1
+ echo " $1 exists, trying to load"
+ insmod $1 $2 > /dev/null
+ if [ $? -ne 0 ]; then
+ echo " Error: insmod $1 $2 failed"
+ exit 1
+ else
+ echo " $1 $2 loaded successfully"
+ fi
fi
- }
-
- ### Test functionality of a module; load if necessary
- do_module_tests () {
- echo " Testing module $1 $2"
- "test_$1"
- if [ $? -ne 0 ]; then
- echo " Module $1 $2 needed"
- echo " Scanning disk for $1 module"
- module_exists $1
- if [ $? -ne 0 ]; then
- echo " $1 module missing: please install it"
- exit 1
- else
- echo " $1 exists, trying to load"
- insmod $1 $2 > /dev/null
- if [ $? -ne 0 ]; then
- echo " Error: insmod $1 $2 failed"
- exit 1
- else
- echo " $1 $2 loaded successfully"
- fi
- fi
- else
- echo " $1 is working"
- fi
-
- }
-
- echo " Testing required modules"
-
- do_module_tests "ipt_mac"
- do_module_tests "ipt_mark"
-
- # test for imq modules, only if TrafficControl is enabled in conf
- if ( grep -q -E '^[[:space:]]*TrafficControl[[:space:]]+(yes|true|1)' "$NDS_CONF" ) ; then
- do_module_tests "imq" "numdevs=2"
- do_module_tests "ipt_IMQ"
- do_module_tests "sch_htb"
+ else
+ echo " $1 is working"
fi
+ }
+
+ echo " Testing required modules"
+
+ do_module_tests "ipt_mac"
+ do_module_tests "ipt_mark"
+
+ # test for imq modules, only if TrafficControl is enabled in conf
+ if ( grep -q -E '^[[:space:]]*TrafficControl[[:space:]]+(yes|true|1)' "$CONFIGFILE" ) ; then
+ do_module_tests "imq" "numdevs=2"
+ do_module_tests "ipt_IMQ"
+ do_module_tests "sch_htb"
+ fi
}