SERVICE_DAEMONIZE=1
SERVICE_WRITE_PID=1
-CONF=/var/etc/olsrd.conf
-PID=/var/run/olsrd.pid
-PID6=/var/run/olsrd.ipv6.pid
-
OLSRD_OLSRD_SCHEMA='ignore:internal config_file:internal DebugLevel=0 AllowNoInt=yes'
OLSRD_IPCCONNECT_SCHEMA='ignore:internal Host:list Net:list2'
-OLSRD_LOADPLUGIN_SCHEMA='ignore:internal library:internal Host4:list Net4:list2 Host:list Net:list2 Host6:list Net6:list2 Ping:list redistribute:list NonOlsrIf:list name:list lat lon latlon_infile HNA:list2 hosts:list2'
-OLSRD_INTERFACE_SCHEMA='ignore:internal interface:internal AutoDetectChanges:bool'
+OLSRD_LOADPLUGIN_SCHEMA='ignore:internal library:internal Host4:list Net4:list2 Host:list Net:list2 Host6:list Net6:list2 Ping:list redistribute:list NonOlsrIf:list name:list lat lon latlon_infile HNA:list2 hosts:list2 ipv6only:bool'
+OLSRD_INTERFACE_SCHEMA='ignore:internal interface:internal AutoDetectChanges:bool LinkQualityMult:list2'
OLSRD_INTERFACE_DEFAULTS_SCHEMA='AutoDetectChanges:bool'
T=' '
}
error() {
- log "ERROR: $@"
+ logger -t olsrd -p daemon.err -s "${initscript}: ERROR: $@"
+}
+
+warn() {
+ logger -t olsrd -p daemon.warn -s "${initscript}: WARNING: $@"
}
validate_varname() {
validate_olsrd_option() {
local str="$1"
- [ -z "$str" -o "$str" != "${str%%[! 0-9A-Za-z./|:_-]*}" ] && return 1
+ [ -z "$str" -o "$str" != "${str%%[! 0-9A-Za-z.%/|:_-]*}" ] && return 1
return 0
}
[ "$OLSRD_COUNT" -gt 0 ] && return 0
- config_get ipversion "$cfg" IpVersion
- if [ "$ipversion" = "6and4" ]; then
- OLSRD_IPVERSION_6AND4=1
- config_set "$cfg" IpVersion '6'
- fi
config_get smartgateway "$cfg" SmartGateway
config_get smartgatewayuplink "$cfg" SmartGatewayUplink
}
olsrd_write_config() {
- OLSRD_IPVERSION_6AND4=0
OLSRD_COUNT=0
config_foreach olsrd_write_olsrd olsrd
IPCCONNECT_COUNT=0
IP6T=$(which ip6tables)
# Delete smartgw firewall rules first
- for IPT in $IP4T $IP6T; do
- while $IPT -D forwarding_rule -o tnl_+ -j ACCEPT 2> /dev/null; do :;done
+ if [ "$UCI_CONF_NAME" = "olsrd6" ]; then
+ while $IP6T -D forwarding_rule -o tnl_+ -j ACCEPT 2> /dev/null; do :;done
for IFACE in $wanifnames; do
- while $IPT -D forwarding_rule -i tunl0 -o $IFACE -j ACCEPT 2> /dev/null; do :; done
+ while $IP6T -D forwarding_rule -i tunl0 -o $IFACE -j ACCEPT 2> /dev/null; do :; done
done
for IFACE in $ifsglobal; do
- while $IPT -D input_rule -i $IFACE -p 4 -j ACCEPT 2> /dev/null; do :; done
+ while $IP6T -D input_rule -i $IFACE -p 4 -j ACCEPT 2> /dev/null; do :; done
done
- done
- while $IP4T -t nat -D postrouting_rule -o tnl_+ -j MASQUERADE 2> /dev/null; do :;done
+ else
+ while $IP4T -D forwarding_rule -o tnl_+ -j ACCEPT 2> /dev/null; do :;done
+ for IFACE in $wanifnames; do
+ while $IP4T -D forwarding_rule -i tunl0 -o $IFACE -j ACCEPT 2> /dev/null; do :; done
+ done
+ for IFACE in $ifsglobal; do
+ while $IP4T -D input_rule -i $IFACE -p 4 -j ACCEPT 2> /dev/null; do :; done
+ done
+ while $IP4T -t nat -D postrouting_rule -o tnl_+ -j MASQUERADE 2> /dev/null; do :;done
+ fi
- if [ "$smartgateway" == "yes" ]; then
+ if [ "$smartgateway" = "yes" ]; then
log "$funcname() Notice: Inserting firewall rules for SmartGateway"
- if [ ! "$smartgatewayuplink" == "none" ]; then
- if [ "$smartgatewayuplink" == "ipv4" ]; then
+ if [ ! "$smartgatewayuplink" = "none" ]; then
+ if [ "$smartgatewayuplink" = "ipv4" ]; then
# Allow everything to be forwarded to tnl_+ and use NAT for it
$IP4T -I forwarding_rule -o tnl_+ -j ACCEPT
$IP4T -t nat -I postrouting_rule -o tnl_+ -j MASQUERADE
for IFACE in $ifsglobal; do
$IP4T -I input_rule -i $IFACE -p 4 -j ACCEPT
done
- elif [ "$smartgatewayuplink" == "ipv6" ]; then
+ elif [ "$smartgatewayuplink" = "ipv6" ]; then
$IP6T -I forwarding_rule -o tnl_+ -j ACCEPT
if [ "$nowan"="0" ]; then
for IFACE in $wanifnames; do
$IP6T -I input_rule -i $IFACE -p 4 -j ACCEPT
done
else
+ $IP4T -t nat -I postrouting_rule -o tnl_+ -j MASQUERADE
for IPT in $IP4T $IP6T; do
$IPT -I forwarding_rule -o tnl_+ -j ACCEPT
- $IPT -t nat -I postrouting_rule -o tnl_+ -j MASQUERADE
if [ "$nowan"="0" ]; then
for IFACE in $wanifnames; do
$IPT -A forwarding_rule -i tunl0 -o $IFACE -j ACCEPT
. /lib/functions/network.sh
- config_load olsrd
+ config_load $UCI_CONF_NAME
reset_cb
OLSRD_CONFIG_FILE=
if [ -z "$OLSRD_CONFIG_FILE" ]; then
mkdir -p -- /var/etc/
- olsrd_write_config > /var/etc/olsrd.conf
+ olsrd_write_config > /var/etc/$UCI_CONF_NAME.conf || return 1
if [ "$INTERFACES_COUNT" -gt 0 -a "$OLSRD_COUNT" -gt 0 ]; then
- OLSRD_CONFIG_FILE=/var/etc/olsrd.conf
+ OLSRD_CONFIG_FILE=/var/etc/$UCI_CONF_NAME.conf
fi
fi
[ -z "$OLSRD_CONFIG_FILE" ] && return 1
- local bindv6only='0'
- if [ "$OLSRD_IPVERSION_6AND4" -ne 0 ]; then
- bindv6only="$(sysctl -n net.ipv6.bindv6only)"
- sysctl -w net.ipv6.bindv6only=1 > /dev/null
- sed -e '/[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}/d' < "$OLSRD_CONFIG_FILE" > /var/etc/olsrd.conf.ipv6
- sed -e 's/^IpVersion[ ][ ]*6$/IpVersion 4/' -e 's/^\t\t[A-Fa-f0-9.:]*[:][A-Fa-f0-9.:]*[ ][0-9]*$//' < "$OLSRD_CONFIG_FILE" > /var/etc/olsrd.conf.ipv4
- rm $OLSRD_CONFIG_FILE
-
- # some filenames should get the suffix .ipv6
- for file in $latlon_file $hosts_file $services_file $resolv_file $macs_file $wd_file;do
- f=$(echo $file|sed 's/\//\\\//g')
- sed -i "s/$f/$f.ipv6/g" /var/etc/olsrd.conf.ipv6
- done
-
- SERVICE_PID_FILE="$PID6"
- if service_check /usr/sbin/olsrd; then
- error "there is already an IPv6 instance of olsrd running (pid: '$(cat $PID6)'), not starting."
- else
- service_start /usr/sbin/olsrd -f /var/etc/olsrd.conf.ipv6 -nofork
- fi
-
- SERVICE_PID_FILE="$PID"
- if service_check /usr/sbin/olsrd; then
- error "there is already an IPv4 instance of olsrd running (pid: '$(cat $PID)'), not starting."
- else
- service_start /usr/sbin/olsrd -f /var/etc/olsrd.conf.ipv4 -nofork
- fi
-
- sleep 3
- sysctl -w net.ipv6.bindv6only="$bindv6only" > /dev/null
-
+ SERVICE_PID_FILE="$PID"
+ if service_check /usr/sbin/olsrd; then
+ error "there is already an instance of $UCI_CONF_NAME running (pid: '$(cat $PID)'), not starting."
+ return 1
else
-
- if [ "$ipversion" = "6" ]; then
- sed -i '/[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}/d' "$OLSRD_CONFIG_FILE"
- fi
-
- SERVICE_PID_FILE="$PID"
- if service_check /usr/sbin/olsrd; then
- error "there is already an IPv4 instance of olsrd running (pid: '$(cat $PID)'), not starting."
- return 1
- else
- service_start /usr/sbin/olsrd -f "$OLSRD_CONFIG_FILE" -nofork
- service_check /usr/sbin/olsrd || {
- log "startup-error: check via: '/usr/sbin/olsrd -f \"$OLSRD_CONFIG_FILE\" -nofork'"
- }
- fi
+ service_start /usr/sbin/olsrd -f "$OLSRD_CONFIG_FILE" -nofork
+ sleep 1
+ service_check /usr/sbin/olsrd || {
+ log "startup-error: check via: '/usr/sbin/olsrd -f \"$OLSRD_CONFIG_FILE\" -nofork'"
+ }
fi
olsrd_setup_smartgw_rules
stop() {
SERVICE_PID_FILE="$PID"
service_stop /usr/sbin/olsrd
-
- SERVICE_PID_FILE="$PID6"
- service_stop /usr/sbin/olsrd
}
projects / feed / routing.git / blobdiff